Merge tag 'char-misc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver merge from Greg Kroah-Hartman:
 "Here is the "big" char/misc driver tree update for the 3.7-rc1 merge
  window.

  Nothing major, just a number of driver updates and fixes, all of which
  have been in the linux-next releases for a while now either in my
  tree, or in Andrew's (the lis3l driver changes came from his tree last
  week).

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'char-misc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (52 commits)
  drivers/misc/lis3lv02d/lis3lv02d_i2c.c: add lis3lv02d device tree init
  drivers/misc/lis3lv02d/lis3lv02d_spi.c: add lis3lv02d device tree init
  drivers/misc/lis3lv02d: remove lis3lv02d driver DT init
  drivers/misc/lis3lv02d/lis3lv02d_spi.c: add DT matching table passthru code
  drivers/misc/lis3lv02d: add generic DT matching code
  lis3lv02d: fix some comments specific to lis331dlh driver
  MISC: hpilo, remove pci_disable_device
  pcmcia: synclink_cs: fix potential tty NULL dereference
  drivers/char/mmtimer.c: Remove useless kfree
  drivers/char: removes unnecessary semicolon
  char/misc: remove CONFIG_EXPERIMENTAL dependencies
  mei: don't print buffer as a string
  mei: struct mei_message_data doesn't have to be packed
  mei: add error messages for open count errors
  misc: use module_spi_driver
  tifm: use module_pci_driver
  misc/at25, dt: Improve at25 SPI eeprom device tree bindings.
  mei: add lynx point pci device ids
  mei: fix max number of open handles
  mei: rename struct pci_dev *mei_device to mei_pdev
  ...

37 files changed, 821 insertions, 506 deletions

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index ea6f6325f9b..72bedad6bf8 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -418,8 +418,8 @@ config APPLICOM
 	  If unsure, say N.
 
 config SONYPI
-	tristate "Sony Vaio Programmable I/O Control Device support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && X86 && PCI && INPUT && !64BIT
+	tristate "Sony Vaio Programmable I/O Control Device support"
+	depends on X86 && PCI && INPUT && !64BIT
 	---help---
 	  This driver enables access to the Sony Programmable I/O Control
 	  Device which can be found in many (all ?) Sony Vaio laptops.
@@ -566,7 +566,7 @@ source "drivers/char/tpm/Kconfig"
 
 config TELCLOCK
 	tristate "Telecom clock driver for ATCA SBC"
-	depends on EXPERIMENTAL && X86
+	depends on X86
 	default n
 	help
 	  The telecom clock device is specific to the MPCBL0010 and MPCBL0050
diff --git a/drivers/char/mmtimer.c b/drivers/char/mmtimer.c
index 33dc2298af7..3d6c0671e99 100644
--- a/drivers/char/mmtimer.c
+++ b/drivers/char/mmtimer.c
@@ -826,7 +826,7 @@ static int __init mmtimer_init(void)
 
 	/* Allocate list of node ptrs to mmtimer_t's */
 	timers = kzalloc(sizeof(struct mmtimer_node)*maxn, GFP_KERNEL);
-	if (timers == NULL) {
+	if (!timers) {
 		printk(KERN_ERR "%s: failed to allocate memory for device\n",
 				MMTIMER_NAME);
 		goto out3;
@@ -848,7 +848,6 @@ static int __init mmtimer_init(void)
 	return 0;
 
 out3:
-	kfree(timers);
 	misc_deregister(&mmtimer_miscdev);
 out2:
 	free_irq(SGI_MMTIMER_VECTOR, NULL);
diff --git a/drivers/char/nwbutton.c b/drivers/char/nwbutton.c
index 04a480f86c6..cfdfe493c6a 100644
--- a/drivers/char/nwbutton.c
+++ b/drivers/char/nwbutton.c
@@ -93,9 +93,9 @@ int button_del_callback (void (*callback) (void))
 			button_callback_list [lp].count = 0;
 			callback_count--;
 			return 0;
-		};
+		}
 		lp--;
-	};
+	}
 	return -EINVAL;
 }
 
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 0a484b4a1b0..a6b8ddea222 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -891,6 +891,14 @@ static void rx_ready_async(MGSLPC_INFO *info, int tcd, struct tty_struct *tty)
 	int work = 0;
  	struct mgsl_icount *icount = &info->icount;
 
+	if (!tty) {
+		/* tty is not available anymore */
+		issue_command(info, CHA, CMD_RXRESET);
+		if (debug_level >= DEBUG_LEVEL_ISR)
+			printk("%s(%d):rx_ready_async(tty=NULL)\n",__FILE__,__LINE__);
+		return;
+	}
+
 	if (tcd) {
 		/* early termination, get FIFO count from RBCL register */
 		fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f);
@@ -980,7 +988,7 @@ static void tx_done(MGSLPC_INFO *info, struct tty_struct *tty)
 	else
 #endif
 	{
-		if (tty->stopped || tty->hw_stopped) {
+		if (tty && (tty->stopped || tty->hw_stopped)) {
 			tx_stop(info);
 			return;
 		}
@@ -1000,7 +1008,7 @@ static void tx_ready(MGSLPC_INFO *info, struct tty_struct *tty)
 		if (!info->tx_active)
 			return;
 	} else {
-		if (tty->stopped || tty->hw_stopped) {
+		if (tty && (tty->stopped || tty->hw_stopped)) {
 			tx_stop(info);
 			return;
 		}
@@ -1050,13 +1058,12 @@ static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty)
 	wake_up_interruptible(&info->status_event_wait_q);
 	wake_up_interruptible(&info->event_wait_q);
 
-	if (info->port.flags & ASYNC_CTS_FLOW) {
+	if (tty && (info->port.flags & ASYNC_CTS_FLOW)) {
 		if (tty->hw_stopped) {
 			if (info->serial_signals & SerialSignal_CTS) {
 				if (debug_level >= DEBUG_LEVEL_ISR)
 					printk("CTS tx start...");
-				if (tty)
-					tty->hw_stopped = 0;
+				tty->hw_stopped = 0;
 				tx_start(info, tty);
 				info->pending_bh |= BH_TRANSMIT;
 				return;
@@ -1065,8 +1072,7 @@ static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty)
 			if (!(info->serial_signals & SerialSignal_CTS)) {
 				if (debug_level >= DEBUG_LEVEL_ISR)
 					printk("CTS tx stop...");
-				if (tty)
-					tty->hw_stopped = 1;
+				tty->hw_stopped = 1;
 				tx_stop(info);
 			}
 		}
diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c
index 3fcf80ff12f..d0d824ebf2c 100644
--- a/drivers/char/ppdev.c
+++ b/drivers/char/ppdev.c
@@ -783,7 +783,8 @@ static int __init ppdev_init (void)
 		err = PTR_ERR(ppdev_class);
 		goto out_chrdev;
 	}
-	if (parport_register_driver(&pp_driver)) {
+	err = parport_register_driver(&pp_driver);
+	if (err < 0) {
 		printk (KERN_WARNING CHRDEV ": unable to register with parport\n");
 		goto out_class;
 	}
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index af9437488b6..91470fdbab2 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -411,7 +411,7 @@ static int rtc_do_ioctl(unsigned int cmd, unsigned long arg, int kernel)
 		case RTC_IRQP_READ:
 		case RTC_IRQP_SET:
 			return -EINVAL;
-		};
+		}
 	}
 #endif
 
diff --git a/drivers/char/tlclk.c b/drivers/char/tlclk.c
index ce29e7cce52..e95e0ab0bd8 100644
--- a/drivers/char/tlclk.c
+++ b/drivers/char/tlclk.c
@@ -784,8 +784,10 @@ static int __init tlclk_init(void)
 	}
 	tlclk_major = ret;
 	alarm_events = kzalloc( sizeof(struct tlclk_alarms), GFP_KERNEL);
-	if (!alarm_events)
+	if (!alarm_events) {
+		ret = -ENOMEM;
 		goto out1;
+	}
 
 	/* Read telecom clock IRQ number (Set by BIOS) */
 	if (!request_region(TLCLK_BASE, 8, "telco_clock")) {
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index cdf2f5451c7..060a672ebb7 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -1941,7 +1941,17 @@ static int __init init(void)
 	INIT_LIST_HEAD(&pdrvdata.consoles);
 	INIT_LIST_HEAD(&pdrvdata.portdevs);
 
-	return register_virtio_driver(&virtio_console);
+	err = register_virtio_driver(&virtio_console);
+	if (err < 0) {
+		pr_err("Error %d registering virtio driver\n", err);
+		goto free;
+	}
+	return 0;
+free:
+	if (pdrvdata.debugfs_dir)
+		debugfs_remove_recursive(pdrvdata.debugfs_dir);
+	class_destroy(pdrvdata.class);
+	return err;
 }
 
 static void __exit fini(void)
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 98a442da892..99c73352c43 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -105,7 +105,7 @@ config ATMEL_TCB_CLKSRC_BLOCK
 
 config IBM_ASM
 	tristate "Device driver for IBM RSA service processor"
-	depends on X86 && PCI && INPUT && EXPERIMENTAL
+	depends on X86 && PCI && INPUT
 	---help---
 	  This option enables device driver support for in-band access to the
 	  IBM RSA (Condor) service processor in eServer xSeries systems.
@@ -162,8 +162,8 @@ config SGI_IOC4
 	  Otherwise say N.
 
 config TIFM_CORE
-	tristate "TI Flash Media interface support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && PCI
+	tristate "TI Flash Media interface support"
+	depends on PCI
 	help
 	  If you want support for Texas Instruments(R) Flash Media adapters
 	  you should select this option and then also choose an appropriate
@@ -178,8 +178,8 @@ config TIFM_CORE
 	  be called tifm_core.
 
 config TIFM_7XX1
-	tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)"
-	depends on PCI && TIFM_CORE && EXPERIMENTAL
+	tristate "TI Flash Media PCI74xx/PCI76xx host adapter support"
+	depends on PCI && TIFM_CORE
 	default TIFM_CORE
 	help
 	  This option enables support for Texas Instruments(R) PCI74xx and
@@ -192,7 +192,7 @@ config TIFM_7XX1
 
 config ICS932S401
 	tristate "Integrated Circuits ICS932S401"
-	depends on I2C && EXPERIMENTAL
+	depends on I2C
 	help
 	  If you say yes here you get support for the Integrated Circuits
 	  ICS932S401 clock control chips.
@@ -398,7 +398,7 @@ config EP93XX_PWM
 
 config DS1682
 	tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
-	depends on I2C && EXPERIMENTAL
+	depends on I2C
 	help
 	  If you say yes here you get support for Dallas Semiconductor
 	  DS1682 Total Elapsed Time Recorder.
diff --git a/drivers/misc/bmp085-i2c.c b/drivers/misc/bmp085-i2c.c
index 9943971c13e..a4f33c995ea 100644
--- a/drivers/misc/bmp085-i2c.c
+++ b/drivers/misc/bmp085-i2c.c
@@ -57,12 +57,6 @@ static int bmp085_i2c_remove(struct i2c_client *client)
 	return bmp085_remove(&client->dev);
 }
 
-static const struct of_device_id bmp085_of_match[] = {
-	{ .compatible = "bosch,bmp085", },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, bmp085_of_match);
-
 static const struct i2c_device_id bmp085_id[] = {
 	{ BMP085_NAME, 0 },
 	{ "bmp180", 0 },
@@ -74,7 +68,6 @@ static struct i2c_driver bmp085_i2c_driver = {
 	.driver = {
 		.owner	= THIS_MODULE,
 		.name	= BMP085_NAME,
-		.of_match_table = bmp085_of_match
 	},
 	.id_table	= bmp085_id,
 	.probe		= bmp085_i2c_probe,
diff --git a/drivers/misc/bmp085-spi.c b/drivers/misc/bmp085-spi.c
index 78aaff9b523..5e982af9973 100644
--- a/drivers/misc/bmp085-spi.c
+++ b/drivers/misc/bmp085-spi.c
@@ -73,19 +73,8 @@ static struct spi_driver bmp085_spi_driver = {
 	.remove		= __devexit_p(bmp085_spi_remove)
 };
 
-static int __init bmp085_spi_init(void)
-{
-	return spi_register_driver(&bmp085_spi_driver);
-}
-
-static void __exit bmp085_spi_exit(void)
-{
-	spi_unregister_driver(&bmp085_spi_driver);
-}
+module_spi_driver(bmp085_spi_driver);
 
 MODULE_AUTHOR("Eric Andersson <eric.andersson@unixphere.com>");
 MODULE_DESCRIPTION("BMP085 SPI bus driver");
 MODULE_LICENSE("GPL");
-
-module_init(bmp085_spi_init);
-module_exit(bmp085_spi_exit);
diff --git a/drivers/misc/c2port/Kconfig b/drivers/misc/c2port/Kconfig
index 33ee834e1b8..0dd690e61d3 100644
--- a/drivers/misc/c2port/Kconfig
+++ b/drivers/misc/c2port/Kconfig
@@ -3,8 +3,7 @@
 #
 
 menuconfig C2PORT
-	tristate "Silicon Labs C2 port support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	tristate "Silicon Labs C2 port support"
 	default n
 	help
 	  This option enables support for Silicon Labs C2 port used to
@@ -22,7 +21,7 @@ menuconfig C2PORT
 if C2PORT
 
 config C2PORT_DURAMAR_2150
-	tristate "C2 port support for Eurotech's Duramar 2150 (EXPERIMENTAL)"
+	tristate "C2 port support for Eurotech's Duramar 2150"
 	depends on X86
 	default n
 	help
diff --git a/drivers/misc/carma/carma-fpga-program.c b/drivers/misc/carma/carma-fpga-program.c
index a2d25e4857e..eaddfe9db14 100644
--- a/drivers/misc/carma/carma-fpga-program.c
+++ b/drivers/misc/carma/carma-fpga-program.c
@@ -978,7 +978,6 @@ static int fpga_of_probe(struct platform_device *op)
 	dev_set_drvdata(priv->dev, priv);
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_MEMCPY, mask);
-	dma_cap_set(DMA_INTERRUPT, mask);
 	dma_cap_set(DMA_SLAVE, mask);
 	dma_cap_set(DMA_SG, mask);
 
diff --git a/drivers/misc/carma/carma-fpga.c b/drivers/misc/carma/carma-fpga.c
index 8c279da0741..0c43297ed9a 100644
--- a/drivers/misc/carma/carma-fpga.c
+++ b/drivers/misc/carma/carma-fpga.c
@@ -666,7 +666,7 @@ static int data_submit_dma(struct fpga_device *priv, struct data_buf *buf)
 	src = SYS_FPGA_BLOCK;
 	tx = chan->device->device_prep_dma_memcpy(chan, dst, src,
 						  REG_BLOCK_SIZE,
-						  DMA_PREP_INTERRUPT);
+						  0);
 	if (!tx) {
 		dev_err(priv->dev, "unable to prep SYS-FPGA DMA\n");
 		return -ENOMEM;
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index 701edf65897..c9e695ea7c9 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -50,7 +50,7 @@ config EEPROM_LEGACY
 
 config EEPROM_MAX6875
 	tristate "Maxim MAX6874/5 power supply supervisor"
-	depends on I2C && EXPERIMENTAL
+	depends on I2C
 	help
 	  If you say yes here you get read-only support for the user EEPROM of
 	  the Maxim MAX6874/5 EEPROM-programmable, quad power-supply
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index 25003d6ceb5..4ed93dd5411 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -302,6 +302,61 @@ static ssize_t at25_mem_write(struct memory_accessor *mem, const char *buf,
 
 /*-------------------------------------------------------------------------*/
 
+static int at25_np_to_chip(struct device *dev,
+			   struct device_node *np,
+			   struct spi_eeprom *chip)
+{
+	u32 val;
+
+	memset(chip, 0, sizeof(*chip));
+	strncpy(chip->name, np->name, sizeof(chip->name));
+
+	if (of_property_read_u32(np, "size", &val) == 0 ||
+	    of_property_read_u32(np, "at25,byte-len", &val) == 0) {
+		chip->byte_len = val;
+	} else {
+		dev_err(dev, "Error: missing \"size\" property\n");
+		return -ENODEV;
+	}
+
+	if (of_property_read_u32(np, "pagesize", &val) == 0 ||
+	    of_property_read_u32(np, "at25,page-size", &val) == 0) {
+		chip->page_size = (u16)val;
+	} else {
+		dev_err(dev, "Error: missing \"pagesize\" property\n");
+		return -ENODEV;
+	}
+
+	if (of_property_read_u32(np, "at25,addr-mode", &val) == 0) {
+		chip->flags = (u16)val;
+	} else {
+		if (of_property_read_u32(np, "address-width", &val)) {
+			dev_err(dev,
+				"Error: missing \"address-width\" property\n");
+			return -ENODEV;
+		}
+		switch (val) {
+		case 8:
+			chip->flags |= EE_ADDR1;
+			break;
+		case 16:
+			chip->flags |= EE_ADDR2;
+			break;
+		case 24:
+			chip->flags |= EE_ADDR3;
+			break;
+		default:
+			dev_err(dev,
+				"Error: bad \"address-width\" property: %u\n",
+				val);
+			return -ENODEV;
+		}
+		if (of_find_property(np, "read-only", NULL))
+			chip->flags |= EE_READONLY;
+	}
+	return 0;
+}
+
 static int at25_probe(struct spi_device *spi)
 {
 	struct at25_data	*at25 = NULL;
@@ -314,33 +369,11 @@ static int at25_probe(struct spi_device *spi)
 	/* Chip description */
 	if (!spi->dev.platform_data) {
 		if (np) {
-			u32 val;
-
-			memset(&chip, 0, sizeof(chip));
-			strncpy(chip.name, np->name, 10);
-
-			err = of_property_read_u32(np, "at25,byte-len", &val);
-			if (err) {
-				dev_dbg(&spi->dev, "invalid chip dt description\n");
-				goto fail;
-			}
-			chip.byte_len = val;
-
-			err = of_property_read_u32(np, "at25,addr-mode", &val);
-			if (err) {
-				dev_dbg(&spi->dev, "invalid chip dt description\n");
-				goto fail;
-			}
-			chip.flags = (u16)val;
-
-			err = of_property_read_u32(np, "at25,page-size", &val);
-			if (err) {
-				dev_dbg(&spi->dev, "invalid chip dt description\n");
+			err = at25_np_to_chip(&spi->dev, np, &chip);
+			if (err)
 				goto fail;
-			}
-			chip.page_size = (u16)val;
 		} else {
-			dev_dbg(&spi->dev, "no chip description\n");
+			dev_err(&spi->dev, "Error: no chip description\n");
 			err = -ENODEV;
 			goto fail;
 		}
diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
index 6df0da4085e..12ccdf94e4f 100644
--- a/drivers/misc/hpilo.c
+++ b/drivers/misc/hpilo.c
@@ -736,7 +736,14 @@ static void ilo_remove(struct pci_dev *pdev)
 	free_irq(pdev->irq, ilo_hw);
 	ilo_unmap_device(pdev, ilo_hw);
 	pci_release_regions(pdev);
-	pci_disable_device(pdev);
+	/*
+	 * pci_disable_device(pdev) used to be here. But this PCI device has
+	 * two functions with interrupt lines connected to a single pin. The
+	 * other one is a USB host controller. So when we disable the PIN here
+	 * e.g. by rmmod hpilo, the controller stops working. It is because
+	 * the interrupt link is disabled in ACPI since it is not refcounted
+	 * yet. See acpi_pci_link_free_irq called from acpi_pci_irq_disable.
+	 */
 	kfree(ilo_hw);
 	ilo_hwdev[(minor / max_ccb)] = 0;
 }
@@ -826,7 +833,7 @@ unmap:
 free_regions:
 	pci_release_regions(pdev);
 disable:
-	pci_disable_device(pdev);
+/*	pci_disable_device(pdev);  see comment in ilo_remove */
 free:
 	kfree(ilo_hw);
 out:
diff --git a/drivers/misc/lis3lv02d/lis3lv02d.c b/drivers/misc/lis3lv02d/lis3lv02d.c
index a981e2a42f9..4a87e5c0a32 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d.c
@@ -39,6 +39,7 @@
 #include <linux/miscdevice.h>
 #include <linux/pm_runtime.h>
 #include <linux/atomic.h>
+#include <linux/of_device.h>
 #include "lis3lv02d.h"
 
 #define DRIVER_NAME     "lis3lv02d"
@@ -80,6 +81,15 @@
 #define LIS3_SENSITIVITY_12B		((LIS3_ACCURACY * 1000) / 1024)
 #define LIS3_SENSITIVITY_8B		(18 * LIS3_ACCURACY)
 
+/*
+ * LIS331DLH spec says 1LSBs corresponds 4G/4096 -> 1LSB is 1000/1024 mG.
+ * Below macros defines sensitivity values for +/-2G. Dataout bits for
+ * +/-2G range is 12 bits so 4 bits adjustment must be done to get 12bit
+ * data from 16bit value. Currently this driver supports only 2G range.
+ */
+#define LIS3DLH_SENSITIVITY_2G		((LIS3_ACCURACY * 1000) / 1024)
+#define SHIFT_ADJ_2G			4
+
 #define LIS3_DEFAULT_FUZZ_12B		3
 #define LIS3_DEFAULT_FLAT_12B		3
 #define LIS3_DEFAULT_FUZZ_8B		1
@@ -135,6 +145,19 @@ static s16 lis3lv02d_read_12(struct lis3lv02d *lis3, int reg)
 	return (s16)((hi << 8) | lo);
 }
 
+/* 12bits for 2G range, 13 bits for 4G range and 14 bits for 8G range */
+static s16 lis331dlh_read_data(struct lis3lv02d *lis3, int reg)
+{
+	u8 lo, hi;
+	int v;
+
+	lis3->read(lis3, reg - 1, &lo);
+	lis3->read(lis3, reg, &hi);
+	v = (int) ((hi << 8) | lo);
+
+	return (s16) v >> lis3->shift_adj;
+}
+
 /**
  * lis3lv02d_get_axis - For the given axis, give the value converted
  * @axis:      1,2,3 - can also be negative
@@ -195,6 +218,7 @@ static void lis3lv02d_get_xyz(struct lis3lv02d *lis3, int *x, int *y, int *z)
 static int lis3_12_rates[4] = {40, 160, 640, 2560};
 static int lis3_8_rates[2] = {100, 400};
 static int lis3_3dc_rates[16] = {0, 1, 10, 25, 50, 100, 200, 400, 1600, 5000};
+static int lis3_3dlh_rates[4] = {50, 100, 400, 1000};
 
 /* ODR is Output Data Rate */
 static int lis3lv02d_get_odr(struct lis3lv02d *lis3)
@@ -267,7 +291,7 @@ static int lis3lv02d_selftest(struct lis3lv02d *lis3, s16 results[3])
 				(LIS3_IRQ1_DATA_READY | LIS3_IRQ2_DATA_READY));
 	}
 
-	if (lis3->whoami == WAI_3DC) {
+	if ((lis3->whoami == WAI_3DC) || (lis3->whoami == WAI_3DLH)) {
 		ctlreg = CTRL_REG4;
 		selftest = CTRL4_ST0;
 	} else {
@@ -398,9 +422,17 @@ int lis3lv02d_poweron(struct lis3lv02d *lis3)
 		lis3->read(lis3, CTRL_REG2, &reg);
 		if (lis3->whoami ==  WAI_12B)
 			reg |= CTRL2_BDU | CTRL2_BOOT;
+		else if (lis3->whoami ==  WAI_3DLH)
+			reg |= CTRL2_BOOT_3DLH;
 		else
 			reg |= CTRL2_BOOT_8B;
 		lis3->write(lis3, CTRL_REG2, reg);
+
+		if (lis3->whoami ==  WAI_3DLH) {
+			lis3->read(lis3, CTRL_REG4, &reg);
+			reg |= CTRL4_BDU;
+			lis3->write(lis3, CTRL_REG4, reg);
+		}
 	}
 
 	err = lis3lv02d_get_pwron_wait(lis3);
@@ -912,6 +944,154 @@ static void lis3lv02d_8b_configure(struct lis3lv02d *lis3,
 	}
 }
 
+#ifdef CONFIG_OF
+int lis3lv02d_init_dt(struct lis3lv02d *lis3)
+{
+	struct lis3lv02d_platform_data *pdata;
+	struct device_node *np = lis3->of_node;
+	u32 val;
+
+	if (!lis3->of_node)
+		return 0;
+
+	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	if (of_get_property(np, "st,click-single-x", NULL))
+		pdata->click_flags |= LIS3_CLICK_SINGLE_X;
+	if (of_get_property(np, "st,click-double-x", NULL))
+		pdata->click_flags |= LIS3_CLICK_DOUBLE_X;
+
+	if (of_get_property(np, "st,click-single-y", NULL))
+		pdata->click_flags |= LIS3_CLICK_SINGLE_Y;
+	if (of_get_property(np, "st,click-double-y", NULL))
+		pdata->click_flags |= LIS3_CLICK_DOUBLE_Y;
+
+	if (of_get_property(np, "st,click-single-z", NULL))
+		pdata->click_flags |= LIS3_CLICK_SINGLE_Z;
+	if (of_get_property(np, "st,click-double-z", NULL))
+		pdata->click_flags |= LIS3_CLICK_DOUBLE_Z;
+
+	if (!of_property_read_u32(np, "st,click-threshold-x", &val))
+		pdata->click_thresh_x = val;
+	if (!of_property_read_u32(np, "st,click-threshold-y", &val))
+		pdata->click_thresh_y = val;
+	if (!of_property_read_u32(np, "st,click-threshold-z", &val))
+		pdata->click_thresh_z = val;
+
+	if (!of_property_read_u32(np, "st,click-time-limit", &val))
+		pdata->click_time_limit = val;
+	if (!of_property_read_u32(np, "st,click-latency", &val))
+		pdata->click_latency = val;
+	if (!of_property_read_u32(np, "st,click-window", &val))
+		pdata->click_window = val;
+
+	if (of_get_property(np, "st,irq1-disable", NULL))
+		pdata->irq_cfg |= LIS3_IRQ1_DISABLE;
+	if (of_get_property(np, "st,irq1-ff-wu-1", NULL))
+		pdata->irq_cfg |= LIS3_IRQ1_FF_WU_1;
+	if (of_get_property(np, "st,irq1-ff-wu-2", NULL))
+		pdata->irq_cfg |= LIS3_IRQ1_FF_WU_2;
+	if (of_get_property(np, "st,irq1-data-ready", NULL))
+		pdata->irq_cfg |= LIS3_IRQ1_DATA_READY;
+	if (of_get_property(np, "st,irq1-click", NULL))
+		pdata->irq_cfg |= LIS3_IRQ1_CLICK;
+
+	if (of_get_property(np, "st,irq2-disable", NULL))
+		pdata->irq_cfg |= LIS3_IRQ2_DISABLE;
+	if (of_get_property(np, "st,irq2-ff-wu-1", NULL))
+		pdata->irq_cfg |= LIS3_IRQ2_FF_WU_1;
+	if (of_get_property(np, "st,irq2-ff-wu-2", NULL))
+		pdata->irq_cfg |= LIS3_IRQ2_FF_WU_2;
+	if (of_get_property(np, "st,irq2-data-ready", NULL))
+		pdata->irq_cfg |= LIS3_IRQ2_DATA_READY;
+	if (of_get_property(np, "st,irq2-click", NULL))
+		pdata->irq_cfg |= LIS3_IRQ2_CLICK;
+
+	if (of_get_property(np, "st,irq-open-drain", NULL))
+		pdata->irq_cfg |= LIS3_IRQ_OPEN_DRAIN;
+	if (of_get_property(np, "st,irq-active-low", NULL))
+		pdata->irq_cfg |= LIS3_IRQ_ACTIVE_LOW;
+
+	if (!of_property_read_u32(np, "st,wu-duration-1", &val))
+		pdata->duration1 = val;
+	if (!of_property_read_u32(np, "st,wu-duration-2", &val))
+		pdata->duration2 = val;
+
+	if (of_get_property(np, "st,wakeup-x-lo", NULL))
+		pdata->wakeup_flags |= LIS3_WAKEUP_X_LO;
+	if (of_get_property(np, "st,wakeup-x-hi", NULL))
+		pdata->wakeup_flags |= LIS3_WAKEUP_X_HI;
+	if (of_get_property(np, "st,wakeup-y-lo", NULL))
+		pdata->wakeup_flags |= LIS3_WAKEUP_Y_LO;
+	if (of_get_property(np, "st,wakeup-y-hi", NULL))
+		pdata->wakeup_flags |= LIS3_WAKEUP_Y_HI;
+	if (of_get_property(np, "st,wakeup-z-lo", NULL))
+		pdata->wakeup_flags |= LIS3_WAKEUP_Z_LO;
+	if (of_get_property(np, "st,wakeup-z-hi", NULL))
+		pdata->wakeup_flags |= LIS3_WAKEUP_Z_HI;
+
+	if (!of_property_read_u32(np, "st,highpass-cutoff-hz", &val)) {
+		switch (val) {
+		case 1:
+			pdata->hipass_ctrl = LIS3_HIPASS_CUTFF_1HZ;
+			break;
+		case 2:
+			pdata->hipass_ctrl = LIS3_HIPASS_CUTFF_2HZ;
+			break;
+		case 4:
+			pdata->hipass_ctrl = LIS3_HIPASS_CUTFF_4HZ;
+			break;
+		case 8:
+			pdata->hipass_ctrl = LIS3_HIPASS_CUTFF_8HZ;
+			break;
+		}
+	}
+
+	if (of_get_property(np, "st,hipass1-disable", NULL))
+		pdata->hipass_ctrl |= LIS3_HIPASS1_DISABLE;
+	if (of_get_property(np, "st,hipass2-disable", NULL))
+		pdata->hipass_ctrl |= LIS3_HIPASS2_DISABLE;
+
+	if (of_get_property(np, "st,axis-x", &val))
+		pdata->axis_x = val;
+	if (of_get_property(np, "st,axis-y", &val))
+		pdata->axis_y = val;
+	if (of_get_property(np, "st,axis-z", &val))
+		pdata->axis_z = val;
+
+	if (of_get_property(np, "st,default-rate", NULL))
+		pdata->default_rate = val;
+
+	if (of_get_property(np, "st,min-limit-x", &val))
+		pdata->st_min_limits[0] = val;
+	if (of_get_property(np, "st,min-limit-y", &val))
+		pdata->st_min_limits[1] = val;
+	if (of_get_property(np, "st,min-limit-z", &val))
+		pdata->st_min_limits[2] = val;
+
+	if (of_get_property(np, "st,max-limit-x", &val))
+		pdata->st_max_limits[0] = val;
+	if (of_get_property(np, "st,max-limit-y", &val))
+		pdata->st_max_limits[1] = val;
+	if (of_get_property(np, "st,max-limit-z", &val))
+		pdata->st_max_limits[2] = val;
+
+
+	lis3->pdata = pdata;
+
+	return 0;
+}
+
+#else
+int lis3lv02d_init_dt(struct lis3lv02d *lis3)
+{
+	return 0;
+}
+#endif
+EXPORT_SYMBOL_GPL(lis3lv02d_init_dt);
+
 /*
  * Initialise the accelerometer and the various subsystems.
  * Should be rather independent of the bus system.
@@ -956,6 +1136,16 @@ int lis3lv02d_init_device(struct lis3lv02d *lis3)
 		lis3->odr_mask = CTRL1_ODR0|CTRL1_ODR1|CTRL1_ODR2|CTRL1_ODR3;
 		lis3->scale = LIS3_SENSITIVITY_8B;
 		break;
+	case WAI_3DLH:
+		pr_info("16 bits lis331dlh sensor found\n");
+		lis3->read_data = lis331dlh_read_data;
+		lis3->mdps_max_val = 2048; /* 12 bits for 2G */
+		lis3->shift_adj = SHIFT_ADJ_2G;
+		lis3->pwron_delay = LIS3_PWRON_DELAY_WAI_8B;
+		lis3->odrs = lis3_3dlh_rates;
+		lis3->odr_mask = CTRL1_DR0 | CTRL1_DR1;
+		lis3->scale = LIS3DLH_SENSITIVITY_2G;
+		break;
 	default:
 		pr_err("unknown sensor type 0x%X\n", lis3->whoami);
 		return -EINVAL;
diff --git a/drivers/misc/lis3lv02d/lis3lv02d.h b/drivers/misc/lis3lv02d/lis3lv02d.h
index 2b1482ad3f1..c439c827eea 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d.h
+++ b/drivers/misc/lis3lv02d/lis3lv02d.h
@@ -26,12 +26,12 @@
 /*
  * This driver tries to support the "digital" accelerometer chips from
  * STMicroelectronics such as LIS3LV02DL, LIS302DL, LIS3L02DQ, LIS331DL,
- * LIS35DE, or LIS202DL. They are very similar in terms of programming, with
- * almost the same registers. In addition to differing on physical properties,
- * they differ on the number of axes (2/3), precision (8/12 bits), and special
- * features (freefall detection, click...). Unfortunately, not all the
- * differences can be probed via a register.
- * They can be connected either via I²C or SPI.
+ * LIS331DLH, LIS35DE, or LIS202DL. They are very similar in terms of
+ * programming, with almost the same registers. In addition to differing
+ * on physical properties, they differ on the number of axes (2/3),
+ * precision (8/12 bits), and special features (freefall detection,
+ * click...). Unfortunately, not all the differences can be probed via
+ * a register. They can be connected either via I²C or SPI.
  */
 
 #include <linux/lis3lv02d.h>
@@ -96,12 +96,22 @@ enum lis3lv02d_reg {
 };
 
 enum lis3_who_am_i {
+	WAI_3DLH	= 0x32,	/* 16 bits: LIS331DLH */
 	WAI_3DC		= 0x33,	/* 8 bits: LIS3DC, HP3DC */
 	WAI_12B		= 0x3A, /* 12 bits: LIS3LV02D[LQ]... */
 	WAI_8B		= 0x3B, /* 8 bits: LIS[23]02D[LQ]... */
 	WAI_6B		= 0x52, /* 6 bits: LIS331DLF - not supported */
 };
 
+enum lis3_type {
+	LIS3LV02D,
+	LIS3DC,
+	HP3DC,
+	LIS2302D,
+	LIS331DLF,
+	LIS331DLH,
+};
+
 enum lis3lv02d_ctrl1_12b {
 	CTRL1_Xen	= 0x01,
 	CTRL1_Yen	= 0x02,
@@ -129,6 +139,27 @@ enum lis3lv02d_ctrl1_3dc {
 	CTRL1_ODR3	= 0x80,
 };
 
+enum lis331dlh_ctrl1 {
+	CTRL1_DR0	= 0x08,
+	CTRL1_DR1	= 0x10,
+	CTRL1_PM0	= 0x20,
+	CTRL1_PM1	= 0x40,
+	CTRL1_PM2	= 0x80,
+};
+
+enum lis331dlh_ctrl2 {
+	CTRL2_HPEN1	= 0x04,
+	CTRL2_HPEN2	= 0x08,
+	CTRL2_FDS_3DLH	= 0x10,
+	CTRL2_BOOT_3DLH	= 0x80,
+};
+
+enum lis331dlh_ctrl4 {
+	CTRL4_STSIGN	= 0x08,
+	CTRL4_BLE	= 0x40,
+	CTRL4_BDU	= 0x80,
+};
+
 enum lis3lv02d_ctrl2 {
 	CTRL2_DAS	= 0x01,
 	CTRL2_SIM	= 0x02,
@@ -279,9 +310,14 @@ struct lis3lv02d {
 	int                     data_ready_count[2];
 	atomic_t		wake_thread;
 	unsigned char           irq_cfg;
+	unsigned int		shift_adj;
 
 	struct lis3lv02d_platform_data *pdata;	/* for passing board config */
 	struct mutex		mutex;     /* Serialize poll and selftest */
+
+#ifdef CONFIG_OF
+	struct device_node	*of_node;
+#endif
 };
 
 int lis3lv02d_init_device(struct lis3lv02d *lis3);
@@ -290,5 +326,6 @@ void lis3lv02d_joystick_disable(struct lis3lv02d *lis3);
 void lis3lv02d_poweroff(struct lis3lv02d *lis3);
 int lis3lv02d_poweron(struct lis3lv02d *lis3);
 int lis3lv02d_remove_fs(struct lis3lv02d *lis3);
+int lis3lv02d_init_dt(struct lis3lv02d *lis3);
 
 extern struct lis3lv02d lis3_dev;
diff --git a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
index e8c0019da97..60ec8689d6e 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
@@ -31,6 +31,10 @@
 #include <linux/i2c.h>
 #include <linux/pm_runtime.h>
 #include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+
 #include "lis3lv02d.h"
 
 #define DRV_NAME	"lis3lv02d_i2c"
@@ -90,7 +94,11 @@ static int lis3_i2c_init(struct lis3lv02d *lis3)
 	if (ret < 0)
 		return ret;
 
-	reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen;
+	if (lis3->whoami == WAI_3DLH)
+		reg |= CTRL1_PM0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen;
+	else
+		reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen;
+
 	return lis3->write(lis3, CTRL_REG1, reg);
 }
 
@@ -98,12 +106,30 @@ static int lis3_i2c_init(struct lis3lv02d *lis3)
 static union axis_conversion lis3lv02d_axis_map =
 	{ .as_array = { LIS3_DEV_X, LIS3_DEV_Y, LIS3_DEV_Z } };
 
+#ifdef CONFIG_OF
+static struct of_device_id lis3lv02d_i2c_dt_ids[] = {
+	{ .compatible = "st,lis3lv02d" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, lis3lv02d_i2c_dt_ids);
+#endif
+
 static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client,
 					const struct i2c_device_id *id)
 {
 	int ret = 0;
 	struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
 
+#ifdef CONFIG_OF
+	if (of_match_device(lis3lv02d_i2c_dt_ids, &client->dev)) {
+		lis3_dev.of_node = client->dev.of_node;
+		ret = lis3lv02d_init_dt(&lis3_dev);
+		if (ret)
+			return ret;
+		pdata = lis3_dev.pdata;
+	}
+#endif
+
 	if (pdata) {
 		if ((pdata->driver_features & LIS3_USE_BLOCK_READ) &&
 			(i2c_check_functionality(client->adapter,
@@ -231,7 +257,8 @@ static int lis3_i2c_runtime_resume(struct device *dev)
 #endif /* CONFIG_PM_RUNTIME */
 
 static const struct i2c_device_id lis3lv02d_id[] = {
-	{"lis3lv02d", 0 },
+	{"lis3lv02d", LIS3LV02D},
+	{"lis331dlh", LIS331DLH},
 	{}
 };
 
@@ -250,6 +277,7 @@ static struct i2c_driver lis3lv02d_i2c_driver = {
 		.name   = DRV_NAME,
 		.owner  = THIS_MODULE,
 		.pm     = &lis3_pm_ops,
+		.of_match_table = of_match_ptr(lis3lv02d_i2c_dt_ids),
 	},
 	.probe	= lis3lv02d_i2c_probe,
 	.remove	= __devexit_p(lis3lv02d_i2c_remove),
diff --git a/drivers/misc/lis3lv02d/lis3lv02d_spi.c b/drivers/misc/lis3lv02d/lis3lv02d_spi.c
index 80880e984b4..ccb6475fa05 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d_spi.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d_spi.c
@@ -17,6 +17,9 @@
 #include <linux/workqueue.h>
 #include <linux/spi/spi.h>
 #include <linux/pm.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
 
 #include "lis3lv02d.h"
 
@@ -58,6 +61,14 @@ static int lis3_spi_init(struct lis3lv02d *lis3)
 static union axis_conversion lis3lv02d_axis_normal =
 	{ .as_array = { 1, 2, 3 } };
 
+#ifdef CONFIG_OF
+static struct of_device_id lis302dl_spi_dt_ids[] = {
+	{ .compatible = "st,lis302dl-spi" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, lis302dl_spi_dt_ids);
+#endif
+
 static int __devinit lis302dl_spi_probe(struct spi_device *spi)
 {
 	int ret;
@@ -75,6 +86,15 @@ static int __devinit lis302dl_spi_probe(struct spi_device *spi)
 	lis3_dev.irq		= spi->irq;
 	lis3_dev.ac		= lis3lv02d_axis_normal;
 	lis3_dev.pdata		= spi->dev.platform_data;
+
+#ifdef CONFIG_OF
+	if (of_match_device(lis302dl_spi_dt_ids, &spi->dev)) {
+		lis3_dev.of_node = spi->dev.of_node;
+		ret = lis3lv02d_init_dt(&lis3_dev);
+		if (ret)
+			return ret;
+	}
+#endif
 	spi_set_drvdata(spi, &lis3_dev);
 
 	return lis3lv02d_init_device(&lis3_dev);
@@ -121,6 +141,7 @@ static struct spi_driver lis302dl_spi_driver = {
 		.name   = DRV_NAME,
 		.owner  = THIS_MODULE,
 		.pm	= &lis3lv02d_spi_pm,
+		.of_match_table = of_match_ptr(lis302dl_spi_dt_ids),
 	},
 	.probe	= lis302dl_spi_probe,
 	.remove	= __devexit_p(lis302dl_spi_remove),
diff --git a/drivers/misc/mei/Kconfig b/drivers/misc/mei/Kconfig
index 47d78a72db2..5a79ccde2fd 100644
--- a/drivers/misc/mei/Kconfig
+++ b/drivers/misc/mei/Kconfig
@@ -1,6 +1,6 @@
 config INTEL_MEI
 	tristate "Intel Management Engine Interface (Intel MEI)"
-	depends on X86 && PCI && EXPERIMENTAL && WATCHDOG_CORE
+	depends on X86 && PCI && WATCHDOG_CORE
 	help
 	  The Intel Management Engine (Intel ME) provides Manageability,
 	  Security and Media services for system containing Intel chipsets.
diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h
index 24c4c962819..9700532f02f 100644
--- a/drivers/misc/mei/hw.h
+++ b/drivers/misc/mei/hw.h
@@ -40,47 +40,48 @@
 /*
  * MEI device IDs
  */
-#define    MEI_DEV_ID_82946GZ	0x2974  /* 82946GZ/GL */
-#define    MEI_DEV_ID_82G35	0x2984  /* 82G35 Express */
-#define    MEI_DEV_ID_82Q965	0x2994  /* 82Q963/Q965 */
-#define    MEI_DEV_ID_82G965	0x29A4  /* 82P965/G965 */
-
-#define    MEI_DEV_ID_82GM965	0x2A04  /* Mobile PM965/GM965 */
-#define    MEI_DEV_ID_82GME965	0x2A14  /* Mobile GME965/GLE960 */
-
-#define    MEI_DEV_ID_ICH9_82Q35 0x29B4  /* 82Q35 Express */
-#define    MEI_DEV_ID_ICH9_82G33 0x29C4  /* 82G33/G31/P35/P31 Express */
-#define    MEI_DEV_ID_ICH9_82Q33 0x29D4  /* 82Q33 Express */
-#define    MEI_DEV_ID_ICH9_82X38 0x29E4  /* 82X38/X48 Express */
-#define    MEI_DEV_ID_ICH9_3200  0x29F4  /* 3200/3210 Server */
-
-#define    MEI_DEV_ID_ICH9_6	0x28B4  /* Bearlake */
-#define    MEI_DEV_ID_ICH9_7	0x28C4  /* Bearlake */
-#define    MEI_DEV_ID_ICH9_8	0x28D4  /* Bearlake */
-#define    MEI_DEV_ID_ICH9_9    0x28E4  /* Bearlake */
-#define    MEI_DEV_ID_ICH9_10	0x28F4  /* Bearlake */
-
-#define    MEI_DEV_ID_ICH9M_1	0x2A44  /* Cantiga */
-#define    MEI_DEV_ID_ICH9M_2	0x2A54  /* Cantiga */
-#define    MEI_DEV_ID_ICH9M_3	0x2A64  /* Cantiga */
-#define    MEI_DEV_ID_ICH9M_4	0x2A74  /* Cantiga */
-
-#define    MEI_DEV_ID_ICH10_1	0x2E04  /* Eaglelake */
-#define    MEI_DEV_ID_ICH10_2	0x2E14  /* Eaglelake */
-#define    MEI_DEV_ID_ICH10_3	0x2E24  /* Eaglelake */
-#define    MEI_DEV_ID_ICH10_4	0x2E34  /* Eaglelake */
-
-#define    MEI_DEV_ID_IBXPK_1	0x3B64  /* Calpella */
-#define    MEI_DEV_ID_IBXPK_2	0x3B65  /* Calpella */
-
-#define    MEI_DEV_ID_CPT_1	0x1C3A    /* Cougerpoint */
-#define    MEI_DEV_ID_PBG_1	0x1D3A    /* PBG */
-
-#define    MEI_DEV_ID_PPT_1	0x1E3A    /* Pantherpoint PPT */
-#define    MEI_DEV_ID_PPT_2	0x1CBA    /* Pantherpoint PPT */
-#define    MEI_DEV_ID_PPT_3	0x1DBA    /* Pantherpoint PPT */
-
-
+#define MEI_DEV_ID_82946GZ    0x2974  /* 82946GZ/GL */
+#define MEI_DEV_ID_82G35      0x2984  /* 82G35 Express */
+#define MEI_DEV_ID_82Q965     0x2994  /* 82Q963/Q965 */
+#define MEI_DEV_ID_82G965     0x29A4  /* 82P965/G965 */
+
+#define MEI_DEV_ID_82GM965    0x2A04  /* Mobile PM965/GM965 */
+#define MEI_DEV_ID_82GME965   0x2A14  /* Mobile GME965/GLE960 */
+
+#define MEI_DEV_ID_ICH9_82Q35 0x29B4  /* 82Q35 Express */
+#define MEI_DEV_ID_ICH9_82G33 0x29C4  /* 82G33/G31/P35/P31 Express */
+#define MEI_DEV_ID_ICH9_82Q33 0x29D4  /* 82Q33 Express */
+#define MEI_DEV_ID_ICH9_82X38 0x29E4  /* 82X38/X48 Express */
+#define MEI_DEV_ID_ICH9_3200  0x29F4  /* 3200/3210 Server */
+
+#define MEI_DEV_ID_ICH9_6     0x28B4  /* Bearlake */
+#define MEI_DEV_ID_ICH9_7     0x28C4  /* Bearlake */
+#define MEI_DEV_ID_ICH9_8     0x28D4  /* Bearlake */
+#define MEI_DEV_ID_ICH9_9     0x28E4  /* Bearlake */
+#define MEI_DEV_ID_ICH9_10    0x28F4  /* Bearlake */
+
+#define MEI_DEV_ID_ICH9M_1    0x2A44  /* Cantiga */
+#define MEI_DEV_ID_ICH9M_2    0x2A54  /* Cantiga */
+#define MEI_DEV_ID_ICH9M_3    0x2A64  /* Cantiga */
+#define MEI_DEV_ID_ICH9M_4    0x2A74  /* Cantiga */
+
+#define MEI_DEV_ID_ICH10_1    0x2E04  /* Eaglelake */
+#define MEI_DEV_ID_ICH10_2    0x2E14  /* Eaglelake */
+#define MEI_DEV_ID_ICH10_3    0x2E24  /* Eaglelake */
+#define MEI_DEV_ID_ICH10_4    0x2E34  /* Eaglelake */
+
+#define MEI_DEV_ID_IBXPK_1    0x3B64  /* Calpella */
+#define MEI_DEV_ID_IBXPK_2    0x3B65  /* Calpella */
+
+#define MEI_DEV_ID_CPT_1      0x1C3A  /* Couger Point */
+#define MEI_DEV_ID_PBG_1      0x1D3A  /* C600/X79 Patsburg */
+
+#define MEI_DEV_ID_PPT_1      0x1E3A  /* Panther Point */
+#define MEI_DEV_ID_PPT_2      0x1CBA  /* Panther Point */
+#define MEI_DEV_ID_PPT_3      0x1DBA  /* Panther Point */
+
+#define MEI_DEV_ID_LPT        0x8C3A  /* Lynx Point */
+#define MEI_DEV_ID_LPT_LP     0x9C3A  /* Lynx Point LP */
 /*
  * MEI HW Section
  */
diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c
index e77f86e69fb..98f1430e3e1 100644
--- a/drivers/misc/mei/init.c
+++ b/drivers/misc/mei/init.c
@@ -24,6 +24,25 @@
 #include "interface.h"
 #include <linux/mei.h>
 
+const char *mei_dev_state_str(int state)
+{
+#define MEI_DEV_STATE(state) case MEI_DEV_##state: return #state
+	switch (state) {
+	MEI_DEV_STATE(INITIALIZING);
+	MEI_DEV_STATE(INIT_CLIENTS);
+	MEI_DEV_STATE(ENABLED);
+	MEI_DEV_STATE(RESETING);
+	MEI_DEV_STATE(DISABLED);
+	MEI_DEV_STATE(RECOVERING_FROM_RESET);
+	MEI_DEV_STATE(POWER_DOWN);
+	MEI_DEV_STATE(POWER_UP);
+	default:
+		return "unkown";
+	}
+#undef MEI_DEV_STATE
+}
+
+
 const uuid_le mei_amthi_guid  = UUID_LE(0x12f80028, 0xb4b7, 0x4b2d, 0xac,
 						0xa8, 0x46, 0xe0, 0xff, 0x65,
 						0x81, 0x4c);
@@ -123,7 +142,7 @@ struct mei_device *mei_device_init(struct pci_dev *pdev)
 	mutex_init(&dev->device_lock);
 	init_waitqueue_head(&dev->wait_recvd_msg);
 	init_waitqueue_head(&dev->wait_stop_wd);
-	dev->mei_state = MEI_INITIALIZING;
+	dev->dev_state = MEI_DEV_INITIALIZING;
 	dev->iamthif_state = MEI_IAMTHIF_IDLE;
 	dev->wd_interface_reg = false;
 
@@ -182,7 +201,7 @@ int mei_hw_init(struct mei_device *dev)
 	}
 
 	if (err <= 0 && !dev->recvd_msg) {
-		dev->mei_state = MEI_DISABLED;
+		dev->dev_state = MEI_DEV_DISABLED;
 		dev_dbg(&dev->pdev->dev,
 			"wait_event_interruptible_timeout failed"
 			"on wait for ME to turn on ME_RDY.\n");
@@ -192,7 +211,7 @@ int mei_hw_init(struct mei_device *dev)
 
 	if (!(((dev->host_hw_state & H_RDY) == H_RDY) &&
 	      ((dev->me_hw_state & ME_RDY_HRA) == ME_RDY_HRA))) {
-		dev->mei_state = MEI_DISABLED;
+		dev->dev_state = MEI_DEV_DISABLED;
 		dev_dbg(&dev->pdev->dev,
 			"host_hw_state = 0x%08x, me_hw_state = 0x%08x.\n",
 			dev->host_hw_state, dev->me_hw_state);
@@ -258,15 +277,15 @@ void mei_reset(struct mei_device *dev, int interrupts_enabled)
 	struct mei_cl_cb *cb_next = NULL;
 	bool unexpected;
 
-	if (dev->mei_state == MEI_RECOVERING_FROM_RESET) {
+	if (dev->dev_state == MEI_DEV_RECOVERING_FROM_RESET) {
 		dev->need_reset = true;
 		return;
 	}
 
-	unexpected = (dev->mei_state != MEI_INITIALIZING &&
-			dev->mei_state != MEI_DISABLED &&
-			dev->mei_state != MEI_POWER_DOWN &&
-			dev->mei_state != MEI_POWER_UP);
+	unexpected = (dev->dev_state != MEI_DEV_INITIALIZING &&
+			dev->dev_state != MEI_DEV_DISABLED &&
+			dev->dev_state != MEI_DEV_POWER_DOWN &&
+			dev->dev_state != MEI_DEV_POWER_UP);
 
 	dev->host_hw_state = mei_hcsr_read(dev);
 
@@ -285,10 +304,10 @@ void mei_reset(struct mei_device *dev, int interrupts_enabled)
 
 	dev->need_reset = false;
 
-	if (dev->mei_state != MEI_INITIALIZING) {
-		if (dev->mei_state != MEI_DISABLED &&
-		    dev->mei_state != MEI_POWER_DOWN)
-			dev->mei_state = MEI_RESETING;
+	if (dev->dev_state != MEI_DEV_INITIALIZING) {
+		if (dev->dev_state != MEI_DEV_DISABLED &&
+		    dev->dev_state != MEI_DEV_POWER_DOWN)
+			dev->dev_state = MEI_DEV_RESETING;
 
 		list_for_each_entry_safe(cl_pos,
 				cl_next, &dev->file_list, link) {
@@ -311,7 +330,6 @@ void mei_reset(struct mei_device *dev, int interrupts_enabled)
 
 	dev->me_clients_num = 0;
 	dev->rd_msg_hdr = 0;
-	dev->stop = false;
 	dev->wd_pending = false;
 
 	/* update the state of the registers after reset */
@@ -322,7 +340,8 @@ void mei_reset(struct mei_device *dev, int interrupts_enabled)
 	    dev->host_hw_state, dev->me_hw_state);
 
 	if (unexpected)
-		dev_warn(&dev->pdev->dev, "unexpected reset.\n");
+		dev_warn(&dev->pdev->dev, "unexpected reset: dev_state = %s\n",
+			 mei_dev_state_str(dev->dev_state));
 
 	/* Wake up all readings so they can be interrupted */
 	list_for_each_entry_safe(cl_pos, cl_next, &dev->file_list, link) {
@@ -371,7 +390,7 @@ void mei_host_start_message(struct mei_device *dev)
 	if (mei_write_message(dev, mei_hdr, (unsigned char *)host_start_req,
 				       mei_hdr->length)) {
 		dev_dbg(&dev->pdev->dev, "write send version message to FW fail.\n");
-		dev->mei_state = MEI_RESETING;
+		dev->dev_state = MEI_DEV_RESETING;
 		mei_reset(dev, 1);
 	}
 	dev->init_clients_state = MEI_START_MESSAGE;
@@ -403,7 +422,7 @@ void mei_host_enum_clients_message(struct mei_device *dev)
 	host_enum_req->hbm_cmd = HOST_ENUM_REQ_CMD;
 	if (mei_write_message(dev, mei_hdr, (unsigned char *)host_enum_req,
 				mei_hdr->length)) {
-		dev->mei_state = MEI_RESETING;
+		dev->dev_state = MEI_DEV_RESETING;
 		dev_dbg(&dev->pdev->dev, "write send enumeration request message to FW fail.\n");
 		mei_reset(dev, 1);
 	}
@@ -444,7 +463,7 @@ void mei_allocate_me_clients_storage(struct mei_device *dev)
 			sizeof(struct mei_me_client), GFP_KERNEL);
 	if (!clients) {
 		dev_dbg(&dev->pdev->dev, "memory allocation for ME clients failed.\n");
-		dev->mei_state = MEI_RESETING;
+		dev->dev_state = MEI_DEV_RESETING;
 		mei_reset(dev, 1);
 		return ;
 	}
@@ -490,7 +509,7 @@ int mei_host_client_properties(struct mei_device *dev)
 		if (mei_write_message(dev, mei_header,
 				(unsigned char *)host_cli_req,
 				mei_header->length)) {
-			dev->mei_state = MEI_RESETING;
+			dev->dev_state = MEI_DEV_RESETING;
 			dev_dbg(&dev->pdev->dev, "write send enumeration request message to FW fail.\n");
 			mei_reset(dev, 1);
 			return -EIO;
@@ -522,12 +541,12 @@ void mei_cl_init(struct mei_cl *priv, struct mei_device *dev)
 	priv->dev = dev;
 }
 
-int mei_find_me_client_index(const struct mei_device *dev, uuid_le cuuid)
+int mei_me_cl_by_uuid(const struct mei_device *dev, const uuid_le *cuuid)
 {
-	int i, res = -1;
+	int i, res = -ENOENT;
 
 	for (i = 0; i < dev->me_clients_num; ++i)
-		if (uuid_le_cmp(cuuid,
+		if (uuid_le_cmp(*cuuid,
 				dev->me_clients[i].props.protocol_name) == 0) {
 			res = i;
 			break;
@@ -538,35 +557,35 @@ int mei_find_me_client_index(const struct mei_device *dev, uuid_le cuuid)
 
 
 /**
- * mei_find_me_client_update_filext - searches for ME client guid
+ * mei_me_cl_update_filext - searches for ME client guid
  *                       sets client_id in mei_file_private if found
  * @dev: the device structure
- * @priv: private file structure to set client_id in
- * @cguid: searched guid of ME client
+ * @cl: private file structure to set client_id in
+ * @cuuid: searched uuid of ME client
  * @client_id: id of host client to be set in file private structure
  *
  * returns ME client index
  */
-u8 mei_find_me_client_update_filext(struct mei_device *dev, struct mei_cl *priv,
-				const uuid_le *cguid, u8 client_id)
+int mei_me_cl_update_filext(struct mei_device *dev, struct mei_cl *cl,
+				const uuid_le *cuuid, u8 host_cl_id)
 {
 	int i;
 
-	if (!dev || !priv || !cguid)
-		return 0;
+	if (!dev || !cl || !cuuid)
+		return -EINVAL;
 
 	/* check for valid client id */
-	i = mei_find_me_client_index(dev, *cguid);
+	i = mei_me_cl_by_uuid(dev, cuuid);
 	if (i >= 0) {
-		priv->me_client_id = dev->me_clients[i].client_id;
-		priv->state = MEI_FILE_CONNECTING;
-		priv->host_client_id = client_id;
+		cl->me_client_id = dev->me_clients[i].client_id;
+		cl->state = MEI_FILE_CONNECTING;
+		cl->host_client_id = host_cl_id;
 
-		list_add_tail(&priv->link, &dev->file_list);
+		list_add_tail(&cl->link, &dev->file_list);
 		return (u8)i;
 	}
 
-	return 0;
+	return -ENOENT;
 }
 
 /**
@@ -577,16 +596,16 @@ u8 mei_find_me_client_update_filext(struct mei_device *dev, struct mei_cl *priv,
  */
 void mei_host_init_iamthif(struct mei_device *dev)
 {
-	u8 i;
+	int i;
 	unsigned char *msg_buf;
 
 	mei_cl_init(&dev->iamthif_cl, dev);
 	dev->iamthif_cl.state = MEI_FILE_DISCONNECTED;
 
 	/* find ME amthi client */
-	i = mei_find_me_client_update_filext(dev, &dev->iamthif_cl,
+	i = mei_me_cl_update_filext(dev, &dev->iamthif_cl,
 			    &mei_amthi_guid, MEI_IAMTHIF_HOST_CLIENT_ID);
-	if (dev->iamthif_cl.state != MEI_FILE_CONNECTING) {
+	if (i < 0) {
 		dev_dbg(&dev->pdev->dev, "failed to find iamthif client.\n");
 		return;
 	}
diff --git a/drivers/misc/mei/interface.h b/drivers/misc/mei/interface.h
index fb5c7db4723..ec6c785a396 100644
--- a/drivers/misc/mei/interface.h
+++ b/drivers/misc/mei/interface.h
@@ -23,14 +23,6 @@
 #include "mei_dev.h"
 
 
-#define AMT_WD_DEFAULT_TIMEOUT 120	/* seconds */
-#define AMT_WD_MIN_TIMEOUT 120	/* seconds */
-#define AMT_WD_MAX_TIMEOUT 65535	/* seconds */
-
-#define MEI_WATCHDOG_DATA_SIZE         16
-#define MEI_START_WD_DATA_SIZE         20
-#define MEI_WD_PARAMS_SIZE             4
-
 
 void mei_read_slots(struct mei_device *dev,
 		     unsigned char *buffer,
@@ -64,7 +56,7 @@ int mei_flow_ctrl_creds(struct mei_device *dev, struct mei_cl *cl);
 
 
 int mei_wd_send(struct mei_device *dev);
-int mei_wd_stop(struct mei_device *dev, bool preserve);
+int mei_wd_stop(struct mei_device *dev);
 int mei_wd_host_init(struct mei_device *dev);
 /*
  * mei_watchdog_register  - Registering watchdog interface
diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c
index d78c05e693f..3533edde04a 100644
--- a/drivers/misc/mei/interrupt.c
+++ b/drivers/misc/mei/interrupt.c
@@ -221,17 +221,10 @@ static int mei_irq_thread_read_client_message(struct mei_io_list *complete_list,
 				cl->status = 0;
 				list_del(&cb_pos->cb_list);
 				dev_dbg(&dev->pdev->dev,
-					"completed read host client = %d,"
-					"ME client = %d, "
-					"data length = %lu\n",
+					"completed read H cl = %d, ME cl = %d, length = %lu\n",
 					cl->host_client_id,
 					cl->me_client_id,
 					cb_pos->information);
-
-				*(cb_pos->response_buffer.data +
-					cb_pos->information) = '\0';
-				dev_dbg(&dev->pdev->dev, "cb_pos->res_buffer - %s\n",
-					cb_pos->response_buffer.data);
 				list_add_tail(&cb_pos->cb_list,
 					&complete_list->mei_cb.cb_list);
 			}
@@ -633,7 +626,7 @@ static void mei_irq_thread_read_bus_message(struct mei_device *dev,
 		if (version_res->host_version_supported) {
 			dev->version.major_version = HBM_MAJOR_VERSION;
 			dev->version.minor_version = HBM_MINOR_VERSION;
-			if (dev->mei_state == MEI_INIT_CLIENTS &&
+			if (dev->dev_state == MEI_DEV_INIT_CLIENTS &&
 			    dev->init_clients_state == MEI_START_MESSAGE) {
 				dev->init_clients_timer = 0;
 				mei_host_enum_clients_message(dev);
@@ -707,7 +700,7 @@ static void mei_irq_thread_read_bus_message(struct mei_device *dev,
 			dev->me_clients[dev->me_client_presentation_num].props
 						= props_res->client_properties;
 
-			if (dev->mei_state == MEI_INIT_CLIENTS &&
+			if (dev->dev_state == MEI_DEV_INIT_CLIENTS &&
 			    dev->init_clients_state ==
 					MEI_CLIENT_PROPERTIES_MESSAGE) {
 				dev->me_client_index++;
@@ -734,7 +727,7 @@ static void mei_irq_thread_read_bus_message(struct mei_device *dev,
 					 * Client ID 2 - Reserved for AMTHI
 					 */
 					bitmap_set(dev->host_clients_map, 0, 3);
-					dev->mei_state = MEI_ENABLED;
+					dev->dev_state = MEI_DEV_ENABLED;
 
 					/* if wd initialization fails, initialization the AMTHI client,
 					 * otherwise the AMTHI client will be initialized after the WD client connect response
@@ -759,7 +752,7 @@ static void mei_irq_thread_read_bus_message(struct mei_device *dev,
 	case HOST_ENUM_RES_CMD:
 		enum_res = (struct hbm_host_enum_response *) mei_msg;
 		memcpy(dev->me_clients_map, enum_res->valid_addresses, 32);
-		if (dev->mei_state == MEI_INIT_CLIENTS &&
+		if (dev->dev_state == MEI_DEV_INIT_CLIENTS &&
 		    dev->init_clients_state == MEI_ENUM_CLIENTS_MESSAGE) {
 				dev->init_clients_timer = 0;
 				dev->me_client_presentation_num = 0;
@@ -776,7 +769,7 @@ static void mei_irq_thread_read_bus_message(struct mei_device *dev,
 		break;
 
 	case HOST_STOP_RES_CMD:
-		dev->mei_state = MEI_DISABLED;
+		dev->dev_state = MEI_DEV_DISABLED;
 		dev_dbg(&dev->pdev->dev, "resetting because of FW stop response.\n");
 		mei_reset(dev, 1);
 		break;
@@ -1224,10 +1217,9 @@ static int mei_irq_thread_write_handler(struct mei_io_list *cmpl_list,
 		}
 	}
 
-	if (dev->stop && !dev->wd_pending) {
-		dev->wd_stopped = true;
+	if (dev->wd_state == MEI_WD_STOPPING) {
+		dev->wd_state = MEI_WD_IDLE;
 		wake_up_interruptible(&dev->wait_stop_wd);
-		return 0;
 	}
 
 	if (dev->extra_write_index) {
@@ -1240,7 +1232,7 @@ static int mei_irq_thread_write_handler(struct mei_io_list *cmpl_list,
 		*slots -= dev->extra_write_index;
 		dev->extra_write_index = 0;
 	}
-	if (dev->mei_state == MEI_ENABLED) {
+	if (dev->dev_state == MEI_DEV_ENABLED) {
 		if (dev->wd_pending &&
 		    mei_flow_ctrl_creds(dev, &dev->wd_cl) > 0) {
 			if (mei_wd_send(dev))
@@ -1250,14 +1242,12 @@ static int mei_irq_thread_write_handler(struct mei_io_list *cmpl_list,
 
 			dev->wd_pending = false;
 
-			if (dev->wd_timeout)
-				*slots -= mei_data2slots(MEI_START_WD_DATA_SIZE);
+			if (dev->wd_state == MEI_WD_RUNNING)
+				*slots -= mei_data2slots(MEI_WD_START_MSG_SIZE);
 			else
-				*slots -= mei_data2slots(MEI_WD_PARAMS_SIZE);
+				*slots -= mei_data2slots(MEI_WD_STOP_MSG_SIZE);
 		}
 	}
-	if (dev->stop)
-		return -ENODEV;
 
 	/* complete control write list CB */
 	dev_dbg(&dev->pdev->dev, "complete control write list cb.\n");
@@ -1361,8 +1351,8 @@ void mei_timer(struct work_struct *work)
 
 
 	mutex_lock(&dev->device_lock);
-	if (dev->mei_state != MEI_ENABLED) {
-		if (dev->mei_state == MEI_INIT_CLIENTS) {
+	if (dev->dev_state != MEI_DEV_ENABLED) {
+		if (dev->dev_state == MEI_DEV_INIT_CLIENTS) {
 			if (dev->init_clients_timer) {
 				if (--dev->init_clients_timer == 0) {
 					dev_dbg(&dev->pdev->dev, "IMEI reset due to init clients timeout ,init clients state = %d.\n",
@@ -1484,8 +1474,8 @@ irqreturn_t mei_interrupt_thread_handler(int irq, void *dev_id)
 
 	/* check if ME wants a reset */
 	if ((dev->me_hw_state & ME_RDY_HRA) == 0 &&
-	    dev->mei_state != MEI_RESETING &&
-	    dev->mei_state != MEI_INITIALIZING) {
+	    dev->dev_state != MEI_DEV_RESETING &&
+	    dev->dev_state != MEI_DEV_INITIALIZING) {
 		dev_dbg(&dev->pdev->dev, "FW not ready.\n");
 		mei_reset(dev, 1);
 		mutex_unlock(&dev->device_lock);
@@ -1498,7 +1488,7 @@ irqreturn_t mei_interrupt_thread_handler(int irq, void *dev_id)
 			dev_dbg(&dev->pdev->dev, "we need to start the dev.\n");
 			dev->host_hw_state |= (H_IE | H_IG | H_RDY);
 			mei_hcsr_set(dev);
-			dev->mei_state = MEI_INIT_CLIENTS;
+			dev->dev_state = MEI_DEV_INIT_CLIENTS;
 			dev_dbg(&dev->pdev->dev, "link is established start sending messages.\n");
 			/* link is established
 			 * start sending messages.
diff --git a/drivers/misc/mei/iorw.c b/drivers/misc/mei/iorw.c
index 50f52e21f58..fcba98eb892 100644
--- a/drivers/misc/mei/iorw.c
+++ b/drivers/misc/mei/iorw.c
@@ -38,7 +38,31 @@
 #include <linux/mei.h>
 #include "interface.h"
 
+/**
+ * mei_me_cl_by_id return index to me_clients for client_id
+ *
+ * @dev: the device structure
+ * @client_id: me client id
+ *
+ * Locking: called under "dev->device_lock" lock
+ *
+ * returns index on success, -ENOENT on failure.
+ */
 
+int mei_me_cl_by_id(struct mei_device *dev, u8 client_id)
+{
+	int i;
+	for (i = 0; i < dev->me_clients_num; i++)
+		if (dev->me_clients[i].client_id == client_id)
+			break;
+	if (WARN_ON(dev->me_clients[i].client_id != client_id))
+		return -ENOENT;
+
+	if (i == dev->me_clients_num)
+		return -ENOENT;
+
+	return i;
+}
 
 /**
  * mei_ioctl_connect_client - the connect to fw client IOCTL function
@@ -84,7 +108,7 @@ int mei_ioctl_connect_client(struct file *file,
 
 	cb->major_file_operations = MEI_IOCTL;
 
-	if (dev->mei_state != MEI_ENABLED) {
+	if (dev->dev_state != MEI_DEV_ENABLED) {
 		rets = -ENODEV;
 		goto end;
 	}
@@ -95,7 +119,7 @@ int mei_ioctl_connect_client(struct file *file,
 	}
 
 	/* find ME client we're trying to connect to */
-	i = mei_find_me_client_index(dev, data->in_client_uuid);
+	i = mei_me_cl_by_uuid(dev, &data->in_client_uuid);
 	if (i >= 0 && !dev->me_clients[i].props.fixed_address) {
 		cl->me_client_id = dev->me_clients[i].client_id;
 		cl->state = MEI_FILE_CONNECTING;
@@ -273,19 +297,12 @@ int amthi_read(struct mei_device *dev, struct file *file,
 		return -ETIMEDOUT;
 	}
 
-	for (i = 0; i < dev->me_clients_num; i++) {
-		if (dev->me_clients[i].client_id ==
-		    dev->iamthif_cl.me_client_id)
-			break;
-	}
+	i = mei_me_cl_by_id(dev, dev->iamthif_cl.me_client_id);
 
-	if (i == dev->me_clients_num) {
+	if (i < 0) {
 		dev_dbg(&dev->pdev->dev, "amthi client not found.\n");
 		return -ENODEV;
 	}
-	if (WARN_ON(dev->me_clients[i].client_id != cl->me_client_id))
-		return -ENODEV;
-
 	dev_dbg(&dev->pdev->dev, "checking amthi data\n");
 	cb = find_amthi_read_list_entry(dev, file);
 
@@ -316,8 +333,7 @@ int amthi_read(struct mei_device *dev, struct file *file,
 	dev->iamthif_timer = 0;
 
 	if (cb) {
-		timeout = cb->read_time +
-					msecs_to_jiffies(IAMTHIF_READ_TIMER);
+		timeout = cb->read_time + msecs_to_jiffies(IAMTHIF_READ_TIMER);
 		dev_dbg(&dev->pdev->dev, "amthi timeout = %lud\n",
 				timeout);
 
@@ -386,7 +402,7 @@ int mei_start_read(struct mei_device *dev, struct mei_cl *cl)
 	if (cl->state != MEI_FILE_CONNECTED)
 		return -ENODEV;
 
-	if (dev->mei_state != MEI_ENABLED)
+	if (dev->dev_state != MEI_DEV_ENABLED)
 		return -ENODEV;
 
 	dev_dbg(&dev->pdev->dev, "check if read is pending.\n");
@@ -401,19 +417,8 @@ int mei_start_read(struct mei_device *dev, struct mei_cl *cl)
 
 	dev_dbg(&dev->pdev->dev, "allocation call back successful. host client = %d, ME client = %d\n",
 		cl->host_client_id, cl->me_client_id);
-
-	for (i = 0; i < dev->me_clients_num; i++) {
-		if (dev->me_clients[i].client_id == cl->me_client_id)
-			break;
-
-	}
-
-	if (WARN_ON(dev->me_clients[i].client_id != cl->me_client_id)) {
-		rets = -ENODEV;
-		goto unlock;
-	}
-
-	if (i == dev->me_clients_num) {
+	i = mei_me_cl_by_id(dev, cl->me_client_id);
+	if (i < 0) {
 		rets = -ENODEV;
 		goto unlock;
 	}
diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c
index 7422c765284..e8b0858132c 100644
--- a/drivers/misc/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -41,11 +41,8 @@
 #include <linux/mei.h>
 #include "interface.h"
 
-static const char mei_driver_name[] = "mei";
-
-/* The device pointer */
-/* Currently this driver works as long as there is only a single AMT device. */
-struct pci_dev *mei_device;
+/* AMT device is a singleton on the platform */
+static struct pci_dev *mei_pdev;
 
 /* mei_pci_tbl - PCI Device ID Table */
 static DEFINE_PCI_DEVICE_TABLE(mei_pci_tbl) = {
@@ -80,6 +77,8 @@ static DEFINE_PCI_DEVICE_TABLE(mei_pci_tbl) = {
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_PPT_1)},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_PPT_2)},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_PPT_3)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT_LP)},
 
 	/* required last entry */
 	{0, }
@@ -220,10 +219,10 @@ static int mei_open(struct inode *inode, struct file *file)
 	int err;
 
 	err = -ENODEV;
-	if (!mei_device)
+	if (!mei_pdev)
 		goto out;
 
-	dev = pci_get_drvdata(mei_device);
+	dev = pci_get_drvdata(mei_pdev);
 	if (!dev)
 		goto out;
 
@@ -234,18 +233,24 @@ static int mei_open(struct inode *inode, struct file *file)
 		goto out_unlock;
 
 	err = -ENODEV;
-	if (dev->mei_state != MEI_ENABLED) {
-		dev_dbg(&dev->pdev->dev, "mei_state != MEI_ENABLED  mei_state= %d\n",
-		    dev->mei_state);
+	if (dev->dev_state != MEI_DEV_ENABLED) {
+		dev_dbg(&dev->pdev->dev, "dev_state != MEI_ENABLED  dev_state = %s\n",
+		    mei_dev_state_str(dev->dev_state));
 		goto out_unlock;
 	}
 	err = -EMFILE;
-	if (dev->open_handle_count >= MEI_MAX_OPEN_HANDLE_COUNT)
+	if (dev->open_handle_count >= MEI_MAX_OPEN_HANDLE_COUNT) {
+		dev_err(&dev->pdev->dev, "open_handle_count exceded %d",
+			MEI_MAX_OPEN_HANDLE_COUNT);
 		goto out_unlock;
+	}
 
 	cl_id = find_first_zero_bit(dev->host_clients_map, MEI_CLIENTS_MAX);
-	if (cl_id >= MEI_CLIENTS_MAX)
+	if (cl_id >= MEI_CLIENTS_MAX) {
+		dev_err(&dev->pdev->dev, "client_id exceded %d",
+				MEI_CLIENTS_MAX) ;
 		goto out_unlock;
+	}
 
 	cl->host_client_id  = cl_id;
 
@@ -386,17 +391,16 @@ static ssize_t mei_read(struct file *file, char __user *ubuf,
 	dev = cl->dev;
 
 	mutex_lock(&dev->device_lock);
-	if (dev->mei_state != MEI_ENABLED) {
+	if (dev->dev_state != MEI_DEV_ENABLED) {
 		rets = -ENODEV;
 		goto out;
 	}
 
 	if ((cl->sm_state & MEI_WD_STATE_INDEPENDENCE_MSG_SENT) == 0) {
 		/* Do not allow to read watchdog client */
-		i = mei_find_me_client_index(dev, mei_wd_guid);
+		i = mei_me_cl_by_uuid(dev, &mei_wd_guid);
 		if (i >= 0) {
 			struct mei_me_client *me_client = &dev->me_clients[i];
-
 			if (cl->me_client_id == me_client->client_id) {
 				rets = -EBADF;
 				goto out;
@@ -541,7 +545,7 @@ static ssize_t mei_write(struct file *file, const char __user *ubuf,
 
 	mutex_lock(&dev->device_lock);
 
-	if (dev->mei_state != MEI_ENABLED) {
+	if (dev->dev_state != MEI_DEV_ENABLED) {
 		mutex_unlock(&dev->device_lock);
 		return -ENODEV;
 	}
@@ -616,26 +620,16 @@ static ssize_t mei_write(struct file *file, const char __user *ubuf,
 			rets = -ENOMEM;
 			goto unlock_dev;
 		}
-		if (dev->mei_state != MEI_ENABLED) {
+		if (dev->dev_state != MEI_DEV_ENABLED) {
 			rets = -ENODEV;
 			goto unlock_dev;
 		}
-		for (i = 0; i < dev->me_clients_num; i++) {
-			if (dev->me_clients[i].client_id ==
-				dev->iamthif_cl.me_client_id)
-				break;
-		}
-
-		if (WARN_ON(dev->me_clients[i].client_id != cl->me_client_id)) {
+		i = mei_me_cl_by_id(dev, dev->iamthif_cl.me_client_id);
+		if (i < 0) {
 			rets = -ENODEV;
 			goto unlock_dev;
 		}
-		if (i == dev->me_clients_num ||
-		    (dev->me_clients[i].client_id !=
-		      dev->iamthif_cl.me_client_id)) {
-			rets = -ENODEV;
-			goto unlock_dev;
-		} else if (length > dev->me_clients[i].props.max_msg_length ||
+		if (length > dev->me_clients[i].props.max_msg_length ||
 			   length <= 0) {
 			rets = -EMSGSIZE;
 			goto unlock_dev;
@@ -688,16 +682,8 @@ static ssize_t mei_write(struct file *file, const char __user *ubuf,
 		    cl->me_client_id);
 		goto unlock_dev;
 	}
-	for (i = 0; i < dev->me_clients_num; i++) {
-		if (dev->me_clients[i].client_id ==
-		    cl->me_client_id)
-			break;
-	}
-	if (WARN_ON(dev->me_clients[i].client_id != cl->me_client_id)) {
-		rets = -ENODEV;
-		goto unlock_dev;
-	}
-	if (i == dev->me_clients_num) {
+	i = mei_me_cl_by_id(dev, cl->me_client_id);
+	if (i < 0) {
 		rets = -ENODEV;
 		goto unlock_dev;
 	}
@@ -790,7 +776,7 @@ static long mei_ioctl(struct file *file, unsigned int cmd, unsigned long data)
 	dev_dbg(&dev->pdev->dev, "IOCTL cmd = 0x%x", cmd);
 
 	mutex_lock(&dev->device_lock);
-	if (dev->mei_state != MEI_ENABLED) {
+	if (dev->dev_state != MEI_DEV_ENABLED) {
 		rets = -ENODEV;
 		goto out;
 	}
@@ -869,7 +855,7 @@ static unsigned int mei_poll(struct file *file, poll_table *wait)
 
 	mutex_lock(&dev->device_lock);
 
-	if (dev->mei_state != MEI_ENABLED)
+	if (dev->dev_state != MEI_DEV_ENABLED)
 		goto out;
 
 
@@ -966,7 +952,7 @@ static int __devinit mei_probe(struct pci_dev *pdev,
 		goto end;
 	}
 
-	if (mei_device) {
+	if (mei_pdev) {
 		err = -EEXIST;
 		goto end;
 	}
@@ -979,7 +965,7 @@ static int __devinit mei_probe(struct pci_dev *pdev,
 	/* set PCI host mastering  */
 	pci_set_master(pdev);
 	/* pci request regions for mei driver */
-	err = pci_request_regions(pdev, mei_driver_name);
+	err = pci_request_regions(pdev, KBUILD_MODNAME);
 	if (err) {
 		dev_err(&pdev->dev, "failed to get pci regions.\n");
 		goto disable_device;
@@ -1004,12 +990,12 @@ static int __devinit mei_probe(struct pci_dev *pdev,
 		err = request_threaded_irq(pdev->irq,
 			NULL,
 			mei_interrupt_thread_handler,
-			IRQF_ONESHOT, mei_driver_name, dev);
+			IRQF_ONESHOT, KBUILD_MODNAME, dev);
 	else
 		err = request_threaded_irq(pdev->irq,
 			mei_interrupt_quick_handler,
 			mei_interrupt_thread_handler,
-			IRQF_SHARED, mei_driver_name, dev);
+			IRQF_SHARED, KBUILD_MODNAME, dev);
 
 	if (err) {
 		dev_err(&pdev->dev, "request_threaded_irq failure. irq = %d\n",
@@ -1027,7 +1013,7 @@ static int __devinit mei_probe(struct pci_dev *pdev,
 	if (err)
 		goto release_irq;
 
-	mei_device = pdev;
+	mei_pdev = pdev;
 	pci_set_drvdata(pdev, dev);
 
 
@@ -1072,7 +1058,7 @@ static void __devexit mei_remove(struct pci_dev *pdev)
 {
 	struct mei_device *dev;
 
-	if (mei_device != pdev)
+	if (mei_pdev != pdev)
 		return;
 
 	dev = pci_get_drvdata(pdev);
@@ -1081,9 +1067,11 @@ static void __devexit mei_remove(struct pci_dev *pdev)
 
 	mutex_lock(&dev->device_lock);
 
-	mei_wd_stop(dev, false);
+	cancel_delayed_work(&dev->timer_work);
 
-	mei_device = NULL;
+	mei_wd_stop(dev);
+
+	mei_pdev = NULL;
 
 	if (dev->iamthif_cl.state == MEI_FILE_CONNECTED) {
 		dev->iamthif_cl.state = MEI_FILE_DISCONNECTING;
@@ -1136,12 +1124,15 @@ static int mei_pci_suspend(struct device *device)
 	if (!dev)
 		return -ENODEV;
 	mutex_lock(&dev->device_lock);
+
+	cancel_delayed_work(&dev->timer_work);
+
 	/* Stop watchdog if exists */
-	err = mei_wd_stop(dev, true);
+	err = mei_wd_stop(dev);
 	/* Set new mei state */
-	if (dev->mei_state == MEI_ENABLED ||
-	    dev->mei_state == MEI_RECOVERING_FROM_RESET) {
-		dev->mei_state = MEI_POWER_DOWN;
+	if (dev->dev_state == MEI_DEV_ENABLED ||
+	    dev->dev_state == MEI_DEV_RECOVERING_FROM_RESET) {
+		dev->dev_state = MEI_DEV_POWER_DOWN;
 		mei_reset(dev, 0);
 	}
 	mutex_unlock(&dev->device_lock);
@@ -1169,12 +1160,12 @@ static int mei_pci_resume(struct device *device)
 		err = request_threaded_irq(pdev->irq,
 			NULL,
 			mei_interrupt_thread_handler,
-			IRQF_ONESHOT, mei_driver_name, dev);
+			IRQF_ONESHOT, KBUILD_MODNAME, dev);
 	else
 		err = request_threaded_irq(pdev->irq,
 			mei_interrupt_quick_handler,
 			mei_interrupt_thread_handler,
-			IRQF_SHARED, mei_driver_name, dev);
+			IRQF_SHARED, KBUILD_MODNAME, dev);
 
 	if (err) {
 		dev_err(&pdev->dev, "request_threaded_irq failed: irq = %d.\n",
@@ -1183,7 +1174,7 @@ static int mei_pci_resume(struct device *device)
 	}
 
 	mutex_lock(&dev->device_lock);
-	dev->mei_state = MEI_POWER_UP;
+	dev->dev_state = MEI_DEV_POWER_UP;
 	mei_reset(dev, 1);
 	mutex_unlock(&dev->device_lock);
 
@@ -1201,7 +1192,7 @@ static SIMPLE_DEV_PM_OPS(mei_pm_ops, mei_pci_suspend, mei_pci_resume);
  *  PCI driver structure
  */
 static struct pci_driver mei_driver = {
-	.name = mei_driver_name,
+	.name = KBUILD_MODNAME,
 	.id_table = mei_pci_tbl,
 	.probe = mei_probe,
 	.remove = __devexit_p(mei_remove),
diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h
index d61c4ddfc80..adb35fb9281 100644
--- a/drivers/misc/mei/mei_dev.h
+++ b/drivers/misc/mei/mei_dev.h
@@ -25,18 +25,20 @@
 /*
  * watch dog definition
  */
-#define MEI_WATCHDOG_DATA_SIZE         16
-#define MEI_START_WD_DATA_SIZE         20
-#define MEI_WD_PARAMS_SIZE             4
+#define MEI_WD_HDR_SIZE       4
+#define MEI_WD_STOP_MSG_SIZE  MEI_WD_HDR_SIZE
+#define MEI_WD_START_MSG_SIZE (MEI_WD_HDR_SIZE + 16)
+
+#define MEI_WD_DEFAULT_TIMEOUT   120  /* seconds */
+#define MEI_WD_MIN_TIMEOUT       120  /* seconds */
+#define MEI_WD_MAX_TIMEOUT     65535  /* seconds */
+
+#define MEI_WD_STOP_TIMEOUT      10 /* msecs */
+
 #define MEI_WD_STATE_INDEPENDENCE_MSG_SENT       (1 << 0)
 
 #define MEI_RD_MSG_BUF_SIZE           (128 * sizeof(u32))
 
-/*
- * MEI PCI Device object
- */
-extern struct pci_dev *mei_device;
-
 
 /*
  * AMTHI Client UUID
@@ -54,19 +56,21 @@ extern const uuid_le mei_wd_guid;
 extern const u8 mei_wd_state_independence_msg[3][4];
 
 /*
+ * Number of Maximum MEI Clients
+ */
+#define MEI_CLIENTS_MAX 256
+
+/*
  * Number of File descriptors/handles
  * that can be opened to the driver.
  *
- * Limit to 253: 255 Total Clients
+ * Limit to 253: 256 Total Clients
+ * minus internal client for MEI Bus Messags
  * minus internal client for AMTHI
  * minus internal client for Watchdog
  */
-#define  MEI_MAX_OPEN_HANDLE_COUNT	253
+#define  MEI_MAX_OPEN_HANDLE_COUNT (MEI_CLIENTS_MAX - 3)
 
-/*
- * Number of Maximum MEI Clients
- */
-#define MEI_CLIENTS_MAX 255
 
 /* File state */
 enum file_state {
@@ -78,17 +82,19 @@ enum file_state {
 };
 
 /* MEI device states */
-enum mei_states {
-	MEI_INITIALIZING = 0,
-	MEI_INIT_CLIENTS,
-	MEI_ENABLED,
-	MEI_RESETING,
-	MEI_DISABLED,
-	MEI_RECOVERING_FROM_RESET,
-	MEI_POWER_DOWN,
-	MEI_POWER_UP
+enum mei_dev_state {
+	MEI_DEV_INITIALIZING = 0,
+	MEI_DEV_INIT_CLIENTS,
+	MEI_DEV_ENABLED,
+	MEI_DEV_RESETING,
+	MEI_DEV_DISABLED,
+	MEI_DEV_RECOVERING_FROM_RESET,
+	MEI_DEV_POWER_DOWN,
+	MEI_DEV_POWER_UP
 };
 
+const char *mei_dev_state_str(int state);
+
 /* init clients states*/
 enum mei_init_clients_states {
 	MEI_START_MESSAGE = 0,
@@ -113,6 +119,12 @@ enum mei_file_transaction_states {
 	MEI_READ_COMPLETE
 };
 
+enum mei_wd_states {
+	MEI_WD_IDLE,
+	MEI_WD_RUNNING,
+	MEI_WD_STOPPING,
+};
+
 /* MEI CB */
 enum mei_cb_major_types {
 	MEI_READ = 0,
@@ -128,7 +140,7 @@ enum mei_cb_major_types {
 struct mei_message_data {
 	u32 size;
 	unsigned char *data;
-} __packed;
+};
 
 
 struct mei_cl_cb {
@@ -218,10 +230,9 @@ struct mei_device {
 	/*
 	 * mei device  states
 	 */
-	enum mei_states mei_state;
+	enum mei_dev_state dev_state;
 	enum mei_init_clients_states init_clients_state;
 	u16 init_clients_timer;
-	bool stop;
 	bool need_reset;
 
 	u32 extra_write_index;
@@ -241,12 +252,11 @@ struct mei_device {
 	bool mei_host_buffer_is_empty;
 
 	struct mei_cl wd_cl;
+	enum mei_wd_states wd_state;
 	bool wd_interface_reg;
 	bool wd_pending;
-	bool wd_stopped;
-	bool wd_bypass;	/* if false, don't refresh watchdog ME client */
-	u16 wd_timeout;	/* seconds ((wd_data[1] << 8) + wd_data[0]) */
-	unsigned char wd_data[MEI_START_WD_DATA_SIZE];
+	u16 wd_timeout;
+	unsigned char wd_data[MEI_WD_START_MSG_SIZE];
 
 
 	struct file *iamthif_file_object;
@@ -279,9 +289,10 @@ void mei_host_init_iamthif(struct mei_device *dev);
 void mei_allocate_me_clients_storage(struct mei_device *dev);
 
 
-u8 mei_find_me_client_update_filext(struct mei_device *dev,
-				struct mei_cl *priv,
-				const uuid_le *cguid, u8 client_id);
+int mei_me_cl_update_filext(struct mei_device *dev, struct mei_cl *cl,
+			const uuid_le *cguid, u8 host_client_id);
+int mei_me_cl_by_uuid(const struct mei_device *dev, const uuid_le *cuuid);
+int mei_me_cl_by_id(struct mei_device *dev, u8 client_id);
 
 /*
  * MEI IO List Functions
@@ -348,7 +359,6 @@ void mei_run_next_iamthif_cmd(struct mei_device *dev);
 
 void mei_free_cb_private(struct mei_cl_cb *priv_cb);
 
-int mei_find_me_client_index(const struct mei_device *dev, uuid_le cuuid);
 
 /*
  * Register Access Function
diff --git a/drivers/misc/mei/wd.c b/drivers/misc/mei/wd.c
index 5133fd77b91..d96c537f046 100644
--- a/drivers/misc/mei/wd.c
+++ b/drivers/misc/mei/wd.c
@@ -48,8 +48,8 @@ const uuid_le mei_wd_guid = UUID_LE(0x05B79A6F, 0x4628, 0x4D7F, 0x89,
 static void mei_wd_set_start_timeout(struct mei_device *dev, u16 timeout)
 {
 	dev_dbg(&dev->pdev->dev, "wd: set timeout=%d.\n", timeout);
-	memcpy(dev->wd_data, mei_start_wd_params, MEI_WD_PARAMS_SIZE);
-	memcpy(dev->wd_data + MEI_WD_PARAMS_SIZE, &timeout, sizeof(u16));
+	memcpy(dev->wd_data, mei_start_wd_params, MEI_WD_HDR_SIZE);
+	memcpy(dev->wd_data + MEI_WD_HDR_SIZE, &timeout, sizeof(u16));
 }
 
 /**
@@ -66,10 +66,11 @@ int mei_wd_host_init(struct mei_device *dev)
 
 	/* look for WD client and connect to it */
 	dev->wd_cl.state = MEI_FILE_DISCONNECTED;
-	dev->wd_timeout = AMT_WD_DEFAULT_TIMEOUT;
+	dev->wd_timeout = MEI_WD_DEFAULT_TIMEOUT;
+	dev->wd_state = MEI_WD_IDLE;
 
 	/* find ME WD client */
-	mei_find_me_client_update_filext(dev, &dev->wd_cl,
+	mei_me_cl_update_filext(dev, &dev->wd_cl,
 				&mei_wd_guid, MEI_WD_HOST_CLIENT_ID);
 
 	dev_dbg(&dev->pdev->dev, "wd: check client\n");
@@ -108,10 +109,10 @@ int mei_wd_send(struct mei_device *dev)
 	mei_hdr->msg_complete = 1;
 	mei_hdr->reserved = 0;
 
-	if (!memcmp(dev->wd_data, mei_start_wd_params, MEI_WD_PARAMS_SIZE))
-		mei_hdr->length = MEI_START_WD_DATA_SIZE;
-	else if (!memcmp(dev->wd_data, mei_stop_wd_params, MEI_WD_PARAMS_SIZE))
-		mei_hdr->length = MEI_WD_PARAMS_SIZE;
+	if (!memcmp(dev->wd_data, mei_start_wd_params, MEI_WD_HDR_SIZE))
+		mei_hdr->length = MEI_WD_START_MSG_SIZE;
+	else if (!memcmp(dev->wd_data, mei_stop_wd_params, MEI_WD_HDR_SIZE))
+		mei_hdr->length = MEI_WD_STOP_MSG_SIZE;
 	else
 		return -EINVAL;
 
@@ -128,18 +129,17 @@ int mei_wd_send(struct mei_device *dev)
  *	-EIO when message send fails
  *	-EINVAL when invalid message is to be sent
  */
-int mei_wd_stop(struct mei_device *dev, bool preserve)
+int mei_wd_stop(struct mei_device *dev)
 {
 	int ret;
-	u16 wd_timeout = dev->wd_timeout;
 
-	cancel_delayed_work(&dev->timer_work);
-	if (dev->wd_cl.state != MEI_FILE_CONNECTED || !dev->wd_timeout)
+	if (dev->wd_cl.state != MEI_FILE_CONNECTED ||
+	    dev->wd_state != MEI_WD_RUNNING)
 		return 0;
 
-	dev->wd_timeout = 0;
-	memcpy(dev->wd_data, mei_stop_wd_params, MEI_WD_PARAMS_SIZE);
-	dev->stop = true;
+	memcpy(dev->wd_data, mei_stop_wd_params, MEI_WD_STOP_MSG_SIZE);
+
+	dev->wd_state = MEI_WD_STOPPING;
 
 	ret = mei_flow_ctrl_creds(dev, &dev->wd_cl);
 	if (ret < 0)
@@ -161,13 +161,14 @@ int mei_wd_stop(struct mei_device *dev, bool preserve)
 	} else {
 		dev->wd_pending = true;
 	}
-	dev->wd_stopped = false;
+
 	mutex_unlock(&dev->device_lock);
 
 	ret = wait_event_interruptible_timeout(dev->wait_stop_wd,
-					dev->wd_stopped, 10 * HZ);
+					dev->wd_state == MEI_WD_IDLE,
+					msecs_to_jiffies(MEI_WD_STOP_TIMEOUT));
 	mutex_lock(&dev->device_lock);
-	if (dev->wd_stopped) {
+	if (dev->wd_state == MEI_WD_IDLE) {
 		dev_dbg(&dev->pdev->dev, "wd: stop completed ret=%d.\n", ret);
 		ret = 0;
 	} else {
@@ -177,9 +178,6 @@ int mei_wd_stop(struct mei_device *dev, bool preserve)
 			"wd: stop failed to complete ret=%d.\n", ret);
 	}
 
-	if (preserve)
-		dev->wd_timeout = wd_timeout;
-
 out:
 	return ret;
 }
@@ -196,16 +194,16 @@ static int mei_wd_ops_start(struct watchdog_device *wd_dev)
 	int err = -ENODEV;
 	struct mei_device *dev;
 
-	dev = pci_get_drvdata(mei_device);
+	dev = watchdog_get_drvdata(wd_dev);
 	if (!dev)
 		return -ENODEV;
 
 	mutex_lock(&dev->device_lock);
 
-	if (dev->mei_state != MEI_ENABLED) {
+	if (dev->dev_state != MEI_DEV_ENABLED) {
 		dev_dbg(&dev->pdev->dev,
-			"wd: mei_state != MEI_ENABLED  mei_state = %d\n",
-			dev->mei_state);
+			"wd: dev_state != MEI_DEV_ENABLED  dev_state = %s\n",
+			mei_dev_state_str(dev->dev_state));
 		goto end_unlock;
 	}
 
@@ -233,13 +231,13 @@ end_unlock:
 static int mei_wd_ops_stop(struct watchdog_device *wd_dev)
 {
 	struct mei_device *dev;
-	dev = pci_get_drvdata(mei_device);
 
+	dev = watchdog_get_drvdata(wd_dev);
 	if (!dev)
 		return -ENODEV;
 
 	mutex_lock(&dev->device_lock);
-	mei_wd_stop(dev, false);
+	mei_wd_stop(dev);
 	mutex_unlock(&dev->device_lock);
 
 	return 0;
@@ -256,8 +254,8 @@ static int mei_wd_ops_ping(struct watchdog_device *wd_dev)
 {
 	int ret = 0;
 	struct mei_device *dev;
-	dev = pci_get_drvdata(mei_device);
 
+	dev = watchdog_get_drvdata(wd_dev);
 	if (!dev)
 		return -ENODEV;
 
@@ -269,6 +267,8 @@ static int mei_wd_ops_ping(struct watchdog_device *wd_dev)
 		goto end;
 	}
 
+	dev->wd_state = MEI_WD_RUNNING;
+
 	/* Check if we can send the ping to HW*/
 	if (dev->mei_host_buffer_is_empty &&
 		mei_flow_ctrl_creds(dev, &dev->wd_cl) > 0) {
@@ -309,13 +309,13 @@ end:
 static int mei_wd_ops_set_timeout(struct watchdog_device *wd_dev, unsigned int timeout)
 {
 	struct mei_device *dev;
-	dev = pci_get_drvdata(mei_device);
 
+	dev = watchdog_get_drvdata(wd_dev);
 	if (!dev)
 		return -ENODEV;
 
 	/* Check Timeout value */
-	if (timeout < AMT_WD_MIN_TIMEOUT || timeout > AMT_WD_MAX_TIMEOUT)
+	if (timeout < MEI_WD_MIN_TIMEOUT || timeout > MEI_WD_MAX_TIMEOUT)
 		return -EINVAL;
 
 	mutex_lock(&dev->device_lock);
@@ -341,37 +341,42 @@ static const struct watchdog_ops wd_ops = {
 };
 static const struct watchdog_info wd_info = {
 		.identity = INTEL_AMT_WATCHDOG_ID,
-		.options = WDIOF_KEEPALIVEPING | WDIOF_ALARMONLY,
+		.options = WDIOF_KEEPALIVEPING |
+			   WDIOF_SETTIMEOUT |
+			   WDIOF_ALARMONLY,
 };
 
 static struct watchdog_device amt_wd_dev = {
 		.info = &wd_info,
 		.ops = &wd_ops,
-		.timeout = AMT_WD_DEFAULT_TIMEOUT,
-		.min_timeout = AMT_WD_MIN_TIMEOUT,
-		.max_timeout = AMT_WD_MAX_TIMEOUT,
+		.timeout = MEI_WD_DEFAULT_TIMEOUT,
+		.min_timeout = MEI_WD_MIN_TIMEOUT,
+		.max_timeout = MEI_WD_MAX_TIMEOUT,
 };
 
 
-void  mei_watchdog_register(struct mei_device *dev)
+void mei_watchdog_register(struct mei_device *dev)
 {
-	dev_dbg(&dev->pdev->dev, "dev->wd_timeout =%d.\n", dev->wd_timeout);
-
 	if (watchdog_register_device(&amt_wd_dev)) {
 		dev_err(&dev->pdev->dev,
 			"wd: unable to register watchdog device.\n");
 		dev->wd_interface_reg = false;
-	} else {
-		dev_dbg(&dev->pdev->dev,
-			"wd: successfully register watchdog interface.\n");
-		dev->wd_interface_reg = true;
+		return;
 	}
+
+	dev_dbg(&dev->pdev->dev,
+		"wd: successfully register watchdog interface.\n");
+	dev->wd_interface_reg = true;
+	watchdog_set_drvdata(&amt_wd_dev, dev);
 }
 
 void mei_watchdog_unregister(struct mei_device *dev)
 {
-	if (dev->wd_interface_reg)
-		watchdog_unregister_device(&amt_wd_dev);
+	if (!dev->wd_interface_reg)
+		return;
+
+	watchdog_set_drvdata(&amt_wd_dev, NULL);
+	watchdog_unregister_device(&amt_wd_dev);
 	dev->wd_interface_reg = false;
 }
 
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index 9fbcacd703d..c9f20dae185 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -699,7 +699,7 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
 	chip->pch_phub_base_address = pci_iomap(pdev, 1, 0);
 
 
-	if (chip->pch_phub_base_address == 0) {
+	if (chip->pch_phub_base_address == NULL) {
 		dev_err(&pdev->dev, "%s : pci_iomap FAILED", __func__);
 		ret = -ENOMEM;
 		goto err_pci_iomap;
@@ -893,18 +893,7 @@ static struct pci_driver pch_phub_driver = {
 	.resume = pch_phub_resume
 };
 
-static int __init pch_phub_pci_init(void)
-{
-	return pci_register_driver(&pch_phub_driver);
-}
-
-static void __exit pch_phub_pci_exit(void)
-{
-	pci_unregister_driver(&pch_phub_driver);
-}
-
-module_init(pch_phub_pci_init);
-module_exit(pch_phub_pci_exit);
+module_pci_driver(pch_phub_driver);
 
 MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7223) PHUB");
 MODULE_LICENSE("GPL");
diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index acfaeeb9e01..46937b10726 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -30,11 +30,13 @@
 
 #include <linux/ti_wilink_st.h>
 
+extern void st_kim_recv(void *, const unsigned char *, long);
+void st_int_recv(void *, const unsigned char *, long);
 /* function pointer pointing to either,
  * st_kim_recv during registration to receive fw download responses
  * st_int_recv after registration to receive proto stack responses
  */
-void (*st_recv) (void*, const unsigned char*, long);
+static void (*st_recv) (void *, const unsigned char *, long);
 
 /********************************************************************/
 static void add_channel_to_table(struct st_data_s *st_gdata,
@@ -100,7 +102,7 @@ int st_int_write(struct st_data_s *st_gdata,
  * push the skb received to relevant
  * protocol stacks
  */
-void st_send_frame(unsigned char chnl_id, struct st_data_s *st_gdata)
+static void st_send_frame(unsigned char chnl_id, struct st_data_s *st_gdata)
 {
 	pr_debug(" %s(prot:%d) ", __func__, chnl_id);
 
@@ -140,7 +142,7 @@ void st_send_frame(unsigned char chnl_id, struct st_data_s *st_gdata)
  * This function is being called with spin lock held, protocol drivers are
  * only expected to complete their waits and do nothing more than that.
  */
-void st_reg_complete(struct st_data_s *st_gdata, char err)
+static void st_reg_complete(struct st_data_s *st_gdata, char err)
 {
 	unsigned char i = 0;
 	pr_info(" %s ", __func__);
@@ -379,7 +381,7 @@ done:
  *	completely, return that skb which has the pending data.
  *	In normal cases, return top of txq.
  */
-struct sk_buff *st_int_dequeue(struct st_data_s *st_gdata)
+static struct sk_buff *st_int_dequeue(struct st_data_s *st_gdata)
 {
 	struct sk_buff *returning_skb;
 
@@ -401,7 +403,7 @@ struct sk_buff *st_int_dequeue(struct st_data_s *st_gdata)
  *	txq and waitq needs protection since the other contexts
  *	may be sending data, waking up chip.
  */
-void st_int_enqueue(struct st_data_s *st_gdata, struct sk_buff *skb)
+static void st_int_enqueue(struct st_data_s *st_gdata, struct sk_buff *skb)
 {
 	unsigned long flags = 0;
 
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index 7c14f8fd98d..04a819944f6 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -63,10 +63,27 @@ static struct platform_device *st_get_plat_device(int id)
  *	in case of error don't complete so that waiting for proper
  *	response times out
  */
-void validate_firmware_response(struct kim_data_s *kim_gdata)
+static void validate_firmware_response(struct kim_data_s *kim_gdata)
 {
 	struct sk_buff *skb = kim_gdata->rx_skb;
-	if (unlikely(skb->data[5] != 0)) {
+	if (!skb)
+		return;
+
+	/* these magic numbers are the position in the response buffer which
+	 * allows us to distinguish whether the response is for the read
+	 * version info. command
+	 */
+	if (skb->data[2] == 0x01 && skb->data[3] == 0x01 &&
+			skb->data[4] == 0x10 && skb->data[5] == 0x00) {
+		/* fw version response */
+		memcpy(kim_gdata->resp_buffer,
+				kim_gdata->rx_skb->data,
+				kim_gdata->rx_skb->len);
+		complete_all(&kim_gdata->kim_rcvd);
+		kim_gdata->rx_state = ST_W4_PACKET_TYPE;
+		kim_gdata->rx_skb = NULL;
+		kim_gdata->rx_count = 0;
+	} else if (unlikely(skb->data[5] != 0)) {
 		pr_err("no proper response during fw download");
 		pr_err("data6 %x", skb->data[5]);
 		kfree_skb(skb);
@@ -119,7 +136,7 @@ static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len)
  *	have been observed to come in bursts of different
  *	tty_receive and hence the logic
  */
-void kim_int_recv(struct kim_data_s *kim_gdata,
+static void kim_int_recv(struct kim_data_s *kim_gdata,
 	const unsigned char *data, long count)
 {
 	const unsigned char *ptr;
@@ -207,16 +224,19 @@ static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name)
 		return -EIO;
 	}
 
-	if (!wait_for_completion_timeout
-	    (&kim_gdata->kim_rcvd, msecs_to_jiffies(CMD_RESP_TIME))) {
+	if (!wait_for_completion_interruptible_timeout(
+		&kim_gdata->kim_rcvd, msecs_to_jiffies(CMD_RESP_TIME))) {
 		pr_err(" waiting for ver info- timed out ");
 		return -ETIMEDOUT;
 	}
 	INIT_COMPLETION(kim_gdata->kim_rcvd);
+	/* the positions 12 & 13 in the response buffer provide with the
+	 * chip, major & minor numbers
+	 */
 
 	version =
-		MAKEWORD(kim_gdata->resp_buffer[13],
-				kim_gdata->resp_buffer[14]);
+		MAKEWORD(kim_gdata->resp_buffer[12],
+				kim_gdata->resp_buffer[13]);
 	chip = (version & 0x7C00) >> 10;
 	min_ver = (version & 0x007F);
 	maj_ver = (version & 0x0380) >> 7;
@@ -236,7 +256,7 @@ static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name)
 	return 0;
 }
 
-void skip_change_remote_baud(unsigned char **ptr, long *len)
+static void skip_change_remote_baud(unsigned char **ptr, long *len)
 {
 	unsigned char *nxt_action, *cur_action;
 	cur_action = *ptr;
@@ -370,9 +390,9 @@ static long download_firmware(struct kim_data_s *kim_gdata)
 			break;
 		case ACTION_WAIT_EVENT:  /* wait */
 			pr_debug("W");
-			if (!wait_for_completion_timeout
-					(&kim_gdata->kim_rcvd,
-					 msecs_to_jiffies(CMD_RESP_TIME))) {
+			if (!wait_for_completion_interruptible_timeout(
+					&kim_gdata->kim_rcvd,
+					msecs_to_jiffies(CMD_RESP_TIME))) {
 				pr_err("response timeout during fw download ");
 				/* timed out */
 				release_firmware(kim_gdata->fw_entry);
@@ -410,16 +430,10 @@ void st_kim_recv(void *disc_data, const unsigned char *data, long count)
 	struct st_data_s	*st_gdata = (struct st_data_s *)disc_data;
 	struct kim_data_s	*kim_gdata = st_gdata->kim_data;
 
-	/* copy to local buffer */
-	if (unlikely(data[4] == 0x01 && data[5] == 0x10 && data[0] == 0x04)) {
-		/* must be the read_ver_cmd */
-		memcpy(kim_gdata->resp_buffer, data, count);
-		complete_all(&kim_gdata->kim_rcvd);
-		return;
-	} else {
-		kim_int_recv(kim_gdata, data, count);
-		/* either completes or times out */
-	}
+	/* proceed to gather all data and distinguish read fw version response
+	 * from other fw responses when data gathering is complete
+	 */
+	kim_int_recv(kim_gdata, data, count);
 	return;
 }
 
@@ -454,11 +468,6 @@ long st_kim_start(void *kim_data)
 		if (pdata->chip_enable)
 			pdata->chip_enable(kim_gdata);
 
-		/* Configure BT nShutdown to HIGH state */
-		gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
-		mdelay(5);	/* FIXME: a proper toggle */
-		gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH);
-		mdelay(100);
 		/* re-initialize the completion */
 		INIT_COMPLETION(kim_gdata->ldisc_installed);
 		/* send notification to UIM */
@@ -467,8 +476,8 @@ long st_kim_start(void *kim_data)
 		sysfs_notify(&kim_gdata->kim_pdev->dev.kobj,
 				NULL, "install");
 		/* wait for ldisc to be installed */
-		err = wait_for_completion_timeout(&kim_gdata->ldisc_installed,
-				msecs_to_jiffies(LDISC_TIME));
+		err = wait_for_completion_interruptible_timeout(
+			&kim_gdata->ldisc_installed, msecs_to_jiffies(LDISC_TIME));
 		if (!err) {
 			/* ldisc installation timeout,
 			 * flush uart, power cycle BT_EN */
@@ -500,8 +509,7 @@ long st_kim_start(void *kim_data)
  *	(b) upon failure to either install ldisc or download firmware.
  *	The function is responsible to (a) notify UIM about un-installation,
  *	(b) flush UART if the ldisc was installed.
- *	(c) reset BT_EN - pull down nshutdown at the end.
- *	(d) invoke platform's chip disabling routine.
+ *	(c) invoke platform's chip disabling routine.
  */
 long st_kim_stop(void *kim_data)
 {
@@ -526,20 +534,13 @@ long st_kim_stop(void *kim_data)
 	sysfs_notify(&kim_gdata->kim_pdev->dev.kobj, NULL, "install");
 
 	/* wait for ldisc to be un-installed */
-	err = wait_for_completion_timeout(&kim_gdata->ldisc_installed,
-			msecs_to_jiffies(LDISC_TIME));
+	err = wait_for_completion_interruptible_timeout(
+		&kim_gdata->ldisc_installed, msecs_to_jiffies(LDISC_TIME));
 	if (!err) {		/* timeout */
 		pr_err(" timed out waiting for ldisc to be un-installed");
-		return -ETIMEDOUT;
+		err = -ETIMEDOUT;
 	}
 
-	/* By default configure BT nShutdown to LOW state */
-	gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
-	mdelay(1);
-	gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH);
-	mdelay(1);
-	gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
-
 	/* platform specific disable */
 	if (pdata->chip_disable)
 		pdata->chip_disable(kim_gdata);
@@ -701,7 +702,7 @@ static const struct file_operations list_debugfs_fops = {
  * board-*.c file
  */
 
-struct dentry *kim_debugfs_dir;
+static struct dentry *kim_debugfs_dir;
 static int kim_probe(struct platform_device *pdev)
 {
 	long status;
@@ -731,20 +732,6 @@ static int kim_probe(struct platform_device *pdev)
 	/* refer to itself */
 	kim_gdata->core_data->kim_data = kim_gdata;
 
-	/* Claim the chip enable nShutdown gpio from the system */
-	kim_gdata->nshutdown = pdata->nshutdown_gpio;
-	status = gpio_request(kim_gdata->nshutdown, "kim");
-	if (unlikely(status)) {
-		pr_err(" gpio %ld request failed ", kim_gdata->nshutdown);
-		return status;
-	}
-
-	/* Configure nShutdown GPIO as output=0 */
-	status = gpio_direction_output(kim_gdata->nshutdown, 0);
-	if (unlikely(status)) {
-		pr_err(" unable to configure gpio %ld", kim_gdata->nshutdown);
-		return status;
-	}
 	/* get reference of pdev for request_firmware
 	 */
 	kim_gdata->kim_pdev = pdev;
@@ -780,18 +767,10 @@ static int kim_probe(struct platform_device *pdev)
 
 static int kim_remove(struct platform_device *pdev)
 {
-	/* free the GPIOs requested */
-	struct ti_st_plat_data	*pdata = pdev->dev.platform_data;
 	struct kim_data_s	*kim_gdata;
 
 	kim_gdata = dev_get_drvdata(&pdev->dev);
 
-	/* Free the Bluetooth/FM/GPIO
-	 * nShutdown gpio from the system
-	 */
-	gpio_free(pdata->nshutdown_gpio);
-	pr_info("nshutdown GPIO Freed");
-
 	debugfs_remove_recursive(kim_debugfs_dir);
 	sysfs_remove_group(&pdev->dev.kobj, &uim_attr_grp);
 	pr_info("sysfs entries removed");
@@ -804,7 +783,7 @@ static int kim_remove(struct platform_device *pdev)
 	return 0;
 }
 
-int kim_suspend(struct platform_device *pdev, pm_message_t state)
+static int kim_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	struct ti_st_plat_data	*pdata = pdev->dev.platform_data;
 
@@ -814,7 +793,7 @@ int kim_suspend(struct platform_device *pdev, pm_message_t state)
 	return -EOPNOTSUPP;
 }
 
-int kim_resume(struct platform_device *pdev)
+static int kim_resume(struct platform_device *pdev)
 {
 	struct ti_st_plat_data	*pdata = pdev->dev.platform_data;
 
diff --git a/drivers/misc/tifm_7xx1.c b/drivers/misc/tifm_7xx1.c
index ba247902267..f8d6654391e 100644
--- a/drivers/misc/tifm_7xx1.c
+++ b/drivers/misc/tifm_7xx1.c
@@ -434,21 +434,9 @@ static struct pci_driver tifm_7xx1_driver = {
 	.resume = tifm_7xx1_resume,
 };
 
-static int __init tifm_7xx1_init(void)
-{
-	return pci_register_driver(&tifm_7xx1_driver);
-}
-
-static void __exit tifm_7xx1_exit(void)
-{
-	pci_unregister_driver(&tifm_7xx1_driver);
-}
-
+module_pci_driver(tifm_7xx1_driver);
 MODULE_AUTHOR("Alex Dubov");
 MODULE_DESCRIPTION("TI FlashMedia host driver");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, tifm_7xx1_pci_tbl);
 MODULE_VERSION(DRIVER_VERSION);
-
-module_init(tifm_7xx1_init);
-module_exit(tifm_7xx1_exit);
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 5ceb1cd5019..7e984034a11 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -60,7 +60,6 @@ config W1_MASTER_GPIO
 
 config HDQ_MASTER_OMAP
 	tristate "OMAP HDQ driver"
-	depends on ARCH_OMAP2PLUS
 	help
 	  Say Y here if you want support for the 1-wire or HDQ Interface
 	  on an OMAP processor.
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index 4b0fcf3c2d0..ca8e60bb2f9 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -18,9 +18,6 @@
 #include <linux/sched.h>
 #include <linux/pm_runtime.h>
 
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
 #include "../w1.h"
 #include "../w1_int.h"
 
@@ -73,11 +70,11 @@ struct hdq_data {
 };
 
 static int __devinit omap_hdq_probe(struct platform_device *pdev);
-static int omap_hdq_remove(struct platform_device *pdev);
+static int __devexit omap_hdq_remove(struct platform_device *pdev);
 
 static struct platform_driver omap_hdq_driver = {
 	.probe =	omap_hdq_probe,
-	.remove =	omap_hdq_remove,
+	.remove =	__devexit_p(omap_hdq_remove),
 	.driver =	{
 		.name =	"omap_hdq",
 	},
@@ -538,39 +535,35 @@ static void omap_w1_write_byte(void *_hdq, u8 byte)
 		hdq_data->init_trans = 0;
 		mutex_unlock(&hdq_data->hdq_mutex);
 	}
-
-	return;
 }
 
 static int __devinit omap_hdq_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	struct hdq_data *hdq_data;
 	struct resource *res;
 	int ret, irq;
 	u8 rev;
 
-	hdq_data = kmalloc(sizeof(*hdq_data), GFP_KERNEL);
+	hdq_data = devm_kzalloc(dev, sizeof(*hdq_data), GFP_KERNEL);
 	if (!hdq_data) {
 		dev_dbg(&pdev->dev, "unable to allocate memory\n");
-		ret = -ENOMEM;
-		goto err_kmalloc;
+		return -ENOMEM;
 	}
 
-	hdq_data->dev = &pdev->dev;
+	hdq_data->dev = dev;
 	platform_set_drvdata(pdev, hdq_data);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_dbg(&pdev->dev, "unable to get resource\n");
-		ret = -ENXIO;
-		goto err_resource;
+		return -ENXIO;
 	}
 
-	hdq_data->hdq_base = ioremap(res->start, SZ_4K);
+	hdq_data->hdq_base = devm_request_and_ioremap(dev, res);
 	if (!hdq_data->hdq_base) {
 		dev_dbg(&pdev->dev, "ioremap failed\n");
-		ret = -EINVAL;
-		goto err_ioremap;
+		return -ENOMEM;
 	}
 
 	hdq_data->hdq_usecount = 0;
@@ -591,7 +584,8 @@ static int __devinit omap_hdq_probe(struct platform_device *pdev)
 		goto err_irq;
 	}
 
-	ret = request_irq(irq, hdq_isr, IRQF_DISABLED, "omap_hdq", hdq_data);
+	ret = devm_request_irq(dev, irq, hdq_isr, IRQF_DISABLED,
+			"omap_hdq", hdq_data);
 	if (ret < 0) {
 		dev_dbg(&pdev->dev, "could not request irq\n");
 		goto err_irq;
@@ -616,19 +610,10 @@ err_irq:
 err_w1:
 	pm_runtime_disable(&pdev->dev);
 
-	iounmap(hdq_data->hdq_base);
-
-err_ioremap:
-err_resource:
-	platform_set_drvdata(pdev, NULL);
-	kfree(hdq_data);
-
-err_kmalloc:
 	return ret;
-
 }
 
-static int omap_hdq_remove(struct platform_device *pdev)
+static int __devexit omap_hdq_remove(struct platform_device *pdev)
 {
 	struct hdq_data *hdq_data = platform_get_drvdata(pdev);
 
@@ -644,27 +629,11 @@ static int omap_hdq_remove(struct platform_device *pdev)
 
 	/* remove module dependency */
 	pm_runtime_disable(&pdev->dev);
-	free_irq(INT_24XX_HDQ_IRQ, hdq_data);
-	platform_set_drvdata(pdev, NULL);
-	iounmap(hdq_data->hdq_base);
-	kfree(hdq_data);
 
 	return 0;
 }
 
-static int __init
-omap_hdq_init(void)
-{
-	return platform_driver_register(&omap_hdq_driver);
-}
-module_init(omap_hdq_init);
-
-static void __exit
-omap_hdq_exit(void)
-{
-	platform_driver_unregister(&omap_hdq_driver);
-}
-module_exit(omap_hdq_exit);
+module_platform_driver(omap_hdq_driver);
 
 module_param(w1_id, int, S_IRUSR);
 MODULE_PARM_DESC(w1_id, "1-wire id for the slave detection");
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index df600d14974..6012c4ea320 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -14,6 +14,8 @@
 #include <linux/slab.h>
 #include <linux/w1-gpio.h>
 #include <linux/gpio.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
 
 #include "../w1.h"
 #include "../w1_int.h"
@@ -42,12 +44,55 @@ static u8 w1_gpio_read_bit(void *data)
 	return gpio_get_value(pdata->pin) ? 1 : 0;
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id w1_gpio_dt_ids[] = {
+	{ .compatible = "w1-gpio" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, w1_gpio_dt_ids);
+
+static int w1_gpio_probe_dt(struct platform_device *pdev)
+{
+	struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
+	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *of_id =
+			of_match_device(w1_gpio_dt_ids, &pdev->dev);
+
+	if (!of_id)
+		return 0;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	if (of_get_property(np, "linux,open-drain", NULL))
+		pdata->is_open_drain = 1;
+
+	pdata->pin = of_get_gpio(np, 0);
+	pdata->ext_pullup_enable_pin = of_get_gpio(np, 1);
+	pdev->dev.platform_data = pdata;
+
+	return 0;
+}
+#else
+static int w1_gpio_probe_dt(struct platform_device *pdev)
+{
+	return 0;
+}
+#endif
+
 static int __init w1_gpio_probe(struct platform_device *pdev)
 {
 	struct w1_bus_master *master;
-	struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
+	struct w1_gpio_platform_data *pdata;
 	int err;
 
+	err = w1_gpio_probe_dt(pdev);
+	if (err < 0)
+		return err;
+
+	pdata = pdev->dev.platform_data;
+
 	if (!pdata)
 		return -ENXIO;
 
@@ -59,6 +104,13 @@ static int __init w1_gpio_probe(struct platform_device *pdev)
 	if (err)
 		goto free_master;
 
+	if (gpio_is_valid(pdata->ext_pullup_enable_pin)) {
+		err = gpio_request_one(pdata->ext_pullup_enable_pin,
+				       GPIOF_INIT_LOW, "w1 pullup");
+		if (err < 0)
+			goto free_gpio;
+	}
+
 	master->data = pdata;
 	master->read_bit = w1_gpio_read_bit;
 
@@ -72,15 +124,21 @@ static int __init w1_gpio_probe(struct platform_device *pdev)
 
 	err = w1_add_master_device(master);
 	if (err)
-		goto free_gpio;
+		goto free_gpio_ext_pu;
 
 	if (pdata->enable_external_pullup)
 		pdata->enable_external_pullup(1);
 
+	if (gpio_is_valid(pdata->ext_pullup_enable_pin))
+		gpio_set_value(pdata->ext_pullup_enable_pin, 1);
+
 	platform_set_drvdata(pdev, master);
 
 	return 0;
 
+ free_gpio_ext_pu:
+	if (gpio_is_valid(pdata->ext_pullup_enable_pin))
+		gpio_free(pdata->ext_pullup_enable_pin);
  free_gpio:
 	gpio_free(pdata->pin);
  free_master:
@@ -97,6 +155,9 @@ static int __exit w1_gpio_remove(struct platform_device *pdev)
 	if (pdata->enable_external_pullup)
 		pdata->enable_external_pullup(0);
 
+	if (gpio_is_valid(pdata->ext_pullup_enable_pin))
+		gpio_set_value(pdata->ext_pullup_enable_pin, 0);
+
 	w1_remove_master_device(master);
 	gpio_free(pdata->pin);
 	kfree(master);
@@ -135,6 +196,7 @@ static struct platform_driver w1_gpio_driver = {
 	.driver = {
 		.name	= "w1-gpio",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(w1_gpio_dt_ids),
 	},
 	.remove	= __exit_p(w1_gpio_remove),
 	.suspend = w1_gpio_suspend,