Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge

25 files changed, 824 insertions, 1911 deletions

diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index af7cb2bfd67..01f042f6f1c 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -1083,23 +1083,33 @@ static int swim3_add_device(struct device_node *swim)
 {
 	struct device_node *mediabay;
 	struct floppy_state *fs = &floppy_states[floppy_count];
+	struct resource res_reg, res_dma;
 
-	if (swim->n_addrs < 2)
-	{
-		printk(KERN_INFO "swim3: expecting 2 addrs (n_addrs:%d, n_intrs:%d)\n",
-		       swim->n_addrs, swim->n_intrs);
+	if (of_address_to_resource(swim, 0, &res_reg) ||
+	    of_address_to_resource(swim, 1, &res_dma)) {
+		printk(KERN_ERR "swim3: Can't get addresses\n");
 		return -EINVAL;
 	}
-
-	if (swim->n_intrs < 2)
-	{
-		printk(KERN_INFO "swim3: expecting 2 intrs (n_addrs:%d, n_intrs:%d)\n",
-		       swim->n_addrs, swim->n_intrs);
+	if (request_mem_region(res_reg.start, res_reg.end - res_reg.start + 1,
+			       " (reg)") == NULL) {
+		printk(KERN_ERR "swim3: Can't request register space\n");
+		return -EINVAL;
+	}
+	if (request_mem_region(res_dma.start, res_dma.end - res_dma.start + 1,
+			       " (dma)") == NULL) {
+		release_mem_region(res_reg.start,
+				   res_reg.end - res_reg.start + 1);
+		printk(KERN_ERR "swim3: Can't request DMA space\n");
 		return -EINVAL;
 	}
 
-	if (!request_OF_resource(swim, 0, NULL)) {
-		printk(KERN_INFO "swim3: can't request IO resource !\n");
+	if (swim->n_intrs < 2) {
+		printk(KERN_INFO "swim3: expecting 2 intrs (n_intrs:%d)\n",
+		       swim->n_intrs);
+		release_mem_region(res_reg.start,
+				   res_reg.end - res_reg.start + 1);
+		release_mem_region(res_dma.start,
+				   res_dma.end - res_dma.start + 1);
 		return -EINVAL;
 	}
 
@@ -1110,10 +1120,8 @@ static int swim3_add_device(struct device_node *swim)
 	memset(fs, 0, sizeof(*fs));
 	spin_lock_init(&fs->lock);
 	fs->state = idle;
-	fs->swim3 = (struct swim3 __iomem *)
-		ioremap(swim->addrs[0].address, 0x200);
-	fs->dma = (struct dbdma_regs __iomem *)
-		ioremap(swim->addrs[1].address, 0x200);
+	fs->swim3 = (struct swim3 __iomem *)ioremap(res_reg.start, 0x200);
+	fs->dma = (struct dbdma_regs __iomem *)ioremap(res_dma.start, 0x200);
 	fs->swim3_intr = swim->intrs[0].line;
 	fs->dma_intr = swim->intrs[1].line;
 	fs->cur_cyl = -1;
diff --git a/drivers/char/watchdog/mpc8xx_wdt.c b/drivers/char/watchdog/mpc8xx_wdt.c
index 56d62ba7c6c..b2fc71e2085 100644
--- a/drivers/char/watchdog/mpc8xx_wdt.c
+++ b/drivers/char/watchdog/mpc8xx_wdt.c
@@ -18,6 +18,7 @@
 #include <linux/watchdog.h>
 #include <asm/8xx_immap.h>
 #include <asm/uaccess.h>
+#include <asm/io.h>
 #include <syslib/m8xx_wdt.h>
 
 static unsigned long wdt_opened;
@@ -25,18 +26,26 @@ static int wdt_status;
 
 static void mpc8xx_wdt_handler_disable(void)
 {
-	volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
+	volatile uint __iomem *piscr;
+	piscr = (uint *)&((immap_t*)IMAP_ADDR)->im_sit.sit_piscr;
 
-	imap->im_sit.sit_piscr &= ~(PISCR_PIE | PISCR_PTE);
+	if (!m8xx_has_internal_rtc)
+		m8xx_wdt_stop_timer();
+	else
+		out_be32(piscr, in_be32(piscr) & ~(PISCR_PIE | PISCR_PTE));
 
 	printk(KERN_NOTICE "mpc8xx_wdt: keep-alive handler deactivated\n");
 }
 
 static void mpc8xx_wdt_handler_enable(void)
 {
-	volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
+	volatile uint __iomem *piscr;
+	piscr = (uint *)&((immap_t*)IMAP_ADDR)->im_sit.sit_piscr;
 
-	imap->im_sit.sit_piscr |= PISCR_PIE | PISCR_PTE;
+	if (!m8xx_has_internal_rtc)
+		m8xx_wdt_install_timer();
+	else
+		out_be32(piscr, in_be32(piscr) | PISCR_PIE | PISCR_PTE);
 
 	printk(KERN_NOTICE "mpc8xx_wdt: keep-alive handler activated\n");
 }
@@ -68,9 +77,6 @@ static int mpc8xx_wdt_release(struct inode *inode, struct file *file)
 static ssize_t mpc8xx_wdt_write(struct file *file, const char *data, size_t len,
 				loff_t * ppos)
 {
-	if (ppos != &file->f_pos)
-		return -ESPIPE;
-
 	if (len)
 		m8xx_wdt_reset();
 
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 4010fe92e72..08d5b8fed2d 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -236,27 +236,17 @@ config I2C_IXP2000
 	  This support is also available as a module. If so, the module
 	  will be called i2c-ixp2000.
 
-config I2C_KEYWEST
-	tristate "Powermac Keywest I2C interface"
+config I2C_POWERMAC
+	tristate "Powermac I2C interface"
 	depends on I2C && PPC_PMAC
+	default y
 	help
-	  This supports the use of the I2C interface in the combo-I/O
-	  chip on recent Apple machines.  Say Y if you have such a machine.
-
-	  This support is also available as a module.  If so, the module 
-	  will be called i2c-keywest.
-
-config I2C_PMAC_SMU
-	tristate "Powermac SMU I2C interface"
-	depends on I2C && PMAC_SMU
-	help
-	  This supports the use of the I2C interface in the SMU
-	  chip on recent Apple machines like the iMac G5.  It is used
-	  among others by the thermal control driver for those machines.
-	  Say Y if you have such a machine.
+	  This exposes the various PowerMac i2c interfaces to the linux i2c
+	  layer and to userland. It is used by various drivers on the powemac
+	  platform, thus should generally be enabled.
 
 	  This support is also available as a module.  If so, the module
-	  will be called i2c-pmac-smu.
+	  will be called i2c-powermac.
 
 config I2C_MPC
 	tristate "MPC107/824x/85xx/52xx"
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index f1df00f66c6..b44831dff68 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -19,8 +19,7 @@ obj-$(CONFIG_I2C_ISA)		+= i2c-isa.o
 obj-$(CONFIG_I2C_ITE)		+= i2c-ite.o
 obj-$(CONFIG_I2C_IXP2000)	+= i2c-ixp2000.o
 obj-$(CONFIG_I2C_IXP4XX)	+= i2c-ixp4xx.o
-obj-$(CONFIG_I2C_KEYWEST)	+= i2c-keywest.o
-obj-$(CONFIG_I2C_PMAC_SMU)	+= i2c-pmac-smu.o
+obj-$(CONFIG_I2C_POWERMAC)	+= i2c-powermac.o
 obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
 obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
 obj-$(CONFIG_I2C_NFORCE2)	+= i2c-nforce2.o
diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c
deleted file mode 100644
index d61f748278f..00000000000
--- a/drivers/i2c/busses/i2c-keywest.c
+++ /dev/null
@@ -1,751 +0,0 @@
-/*
-    i2c Support for Apple Keywest I2C Bus Controller
-
-    Copyright (c) 2001 Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
-    Original work by
-    
-    Copyright (c) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-    Changes:
-
-    2001/12/13 BenH	New implementation
-    2001/12/15 BenH	Add support for "byte" and "quick"
-                        transfers. Add i2c_xfer routine.
-    2003/09/21 BenH	Rework state machine with Paulus help
-    2004/01/21 BenH	Merge in Greg KH changes, polled mode is back
-    2004/02/05 BenH	Merge 64 bits fixes from the g5 ppc64 tree
-
-    My understanding of the various modes supported by keywest are:
-
-     - Dumb mode : not implemented, probably direct tweaking of lines
-     - Standard mode : simple i2c transaction of type
-         S Addr R/W A Data A Data ... T
-     - Standard sub mode : combined 8 bit subaddr write with data read
-         S Addr R/W A SubAddr A Data A Data ... T
-     - Combined mode : Subaddress and Data sequences appended with no stop
-         S Addr R/W A SubAddr S Addr R/W A Data A Data ... T
-
-    Currently, this driver uses only Standard mode for i2c xfer, and
-    smbus byte & quick transfers ; and uses StandardSub mode for
-    other smbus transfers instead of combined as we need that for the
-    sound driver to be happy
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/timer.h>
-#include <linux/spinlock.h>
-#include <linux/completion.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/machdep.h>
-#include <asm/pmac_feature.h>
-#include <asm/pmac_low_i2c.h>
-
-#include "i2c-keywest.h"
-
-#undef POLLED_MODE
-
-/* Some debug macros */
-#define WRONG_STATE(name) do {\
-		pr_debug("KW: wrong state. Got %s, state: %s (isr: %02x)\n", \
-			 name, __kw_state_names[iface->state], isr);	\
-	} while(0)
-
-#ifdef DEBUG
-static const char *__kw_state_names[] = {
-	"state_idle",
-	"state_addr",
-	"state_read",
-	"state_write",
-	"state_stop",
-	"state_dead"
-};
-#endif /* DEBUG */
-
-MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
-MODULE_DESCRIPTION("I2C driver for Apple's Keywest");
-MODULE_LICENSE("GPL");
-
-#ifdef POLLED_MODE
-/* Don't schedule, the g5 fan controller is too
- * timing sensitive
- */
-static u8
-wait_interrupt(struct keywest_iface* iface)
-{
-	int i;
-	u8 isr;
-	
-	for (i = 0; i < 200000; i++) {
-		isr = read_reg(reg_isr) & KW_I2C_IRQ_MASK;
-		if (isr != 0)
-			return isr;
-		udelay(10);
-	}
-	return isr;
-}
-#endif /* POLLED_MODE */
-
-static void
-do_stop(struct keywest_iface* iface, int result)
-{
-	write_reg(reg_control, KW_I2C_CTL_STOP);
-	iface->state = state_stop;
-	iface->result = result;
-}
-
-/* Main state machine for standard & standard sub mode */
-static void
-handle_interrupt(struct keywest_iface *iface, u8 isr)
-{
-	int ack;
-	
-	if (isr == 0) {
-		if (iface->state != state_stop) {
-			pr_debug("KW: Timeout !\n");
-			do_stop(iface, -EIO);
-		}
-		if (iface->state == state_stop) {
-			ack = read_reg(reg_status);
-			if (!(ack & KW_I2C_STAT_BUSY)) {
-				iface->state = state_idle;
-				write_reg(reg_ier, 0x00);
-#ifndef POLLED_MODE
-				complete(&iface->complete);
-#endif /* POLLED_MODE */
-			}
-		}
-		return;
-	}
-
-	if (isr & KW_I2C_IRQ_ADDR) {
-		ack = read_reg(reg_status);
-		if (iface->state != state_addr) {
-			write_reg(reg_isr, KW_I2C_IRQ_ADDR);
-			WRONG_STATE("KW_I2C_IRQ_ADDR"); 
-			do_stop(iface, -EIO);
-			return;
-		}
-		if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
-			iface->state = state_stop;		     
-			iface->result = -ENODEV;
-			pr_debug("KW: NAK on address\n");
-		} else {
-			/* Handle rw "quick" mode */
-			if (iface->datalen == 0) {
-				do_stop(iface, 0);
-			} else if (iface->read_write == I2C_SMBUS_READ) {
-				iface->state = state_read;
-				if (iface->datalen > 1)
-					write_reg(reg_control, KW_I2C_CTL_AAK);
-			} else {
-				iface->state = state_write;
-				write_reg(reg_data, *(iface->data++));
-				iface->datalen--;
-			}
-		}
-		write_reg(reg_isr, KW_I2C_IRQ_ADDR);
-	}
-
-	if (isr & KW_I2C_IRQ_DATA) {
-		if (iface->state == state_read) {
-			*(iface->data++) = read_reg(reg_data);
-			write_reg(reg_isr, KW_I2C_IRQ_DATA);
-			iface->datalen--;
-			if (iface->datalen == 0)
-				iface->state = state_stop;
-			else if (iface->datalen == 1)
-				write_reg(reg_control, 0);
-		} else if (iface->state == state_write) {
-			/* Check ack status */
-			ack = read_reg(reg_status);
-			if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
-				pr_debug("KW: nack on data write (%x): %x\n",
-				    iface->data[-1], ack);
-				do_stop(iface, -EIO);
-			} else if (iface->datalen) {
-				write_reg(reg_data, *(iface->data++));
-				iface->datalen--;
-			} else {
-				write_reg(reg_control, KW_I2C_CTL_STOP);
-				iface->state = state_stop;
-				iface->result = 0;
-			}
-			write_reg(reg_isr, KW_I2C_IRQ_DATA);
-		} else {
-			write_reg(reg_isr, KW_I2C_IRQ_DATA);
-			WRONG_STATE("KW_I2C_IRQ_DATA"); 
-			if (iface->state != state_stop)
-				do_stop(iface, -EIO);
-		}
-	}
-
-	if (isr & KW_I2C_IRQ_STOP) {
-		write_reg(reg_isr, KW_I2C_IRQ_STOP);
-		if (iface->state != state_stop) {
-			WRONG_STATE("KW_I2C_IRQ_STOP");
-			iface->result = -EIO;
-		}
-		iface->state = state_idle;
-		write_reg(reg_ier, 0x00);
-#ifndef POLLED_MODE
-		complete(&iface->complete);
-#endif /* POLLED_MODE */			
-	}
-
-	if (isr & KW_I2C_IRQ_START)
-		write_reg(reg_isr, KW_I2C_IRQ_START);
-}
-
-#ifndef POLLED_MODE
-
-/* Interrupt handler */
-static irqreturn_t
-keywest_irq(int irq, void *dev_id, struct pt_regs *regs)
-{
-	struct keywest_iface *iface = (struct keywest_iface *)dev_id;
-	unsigned long flags;
-
-	spin_lock_irqsave(&iface->lock, flags);
-	del_timer(&iface->timeout_timer);
-	handle_interrupt(iface, read_reg(reg_isr));
-	if (iface->state != state_idle) {
-		iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
-		add_timer(&iface->timeout_timer);
-	}
-	spin_unlock_irqrestore(&iface->lock, flags);
-	return IRQ_HANDLED;
-}
-
-static void
-keywest_timeout(unsigned long data)
-{
-	struct keywest_iface *iface = (struct keywest_iface *)data;
-	unsigned long flags;
-
-	pr_debug("timeout !\n");
-	spin_lock_irqsave(&iface->lock, flags);
-	handle_interrupt(iface, read_reg(reg_isr));
-	if (iface->state != state_idle) {
-		iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
-		add_timer(&iface->timeout_timer);
-	}
-	spin_unlock_irqrestore(&iface->lock, flags);
-}
-
-#endif /* POLLED_MODE */
-
-/*
- * SMBUS-type transfer entrypoint
- */
-static s32
-keywest_smbus_xfer(	struct i2c_adapter*	adap,
-			u16			addr,
-			unsigned short		flags,
-			char			read_write,
-			u8			command,
-			int			size,
-			union i2c_smbus_data*	data)
-{
-	struct keywest_chan* chan = i2c_get_adapdata(adap);
-	struct keywest_iface* iface = chan->iface;
-	int len;
-	u8* buffer;
-	u16 cur_word;
-	int rc = 0;
-
-	if (iface->state == state_dead)
-		return -ENXIO;
-		
-	/* Prepare datas & select mode */
-	iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK;
-	switch (size) {
-        case I2C_SMBUS_QUICK:
-	    	len = 0;
-	    	buffer = NULL;
-	    	iface->cur_mode |= KW_I2C_MODE_STANDARD;
-	    	break;
-        case I2C_SMBUS_BYTE:
-	    	len = 1;
-	    	buffer = &data->byte;
-	    	iface->cur_mode |= KW_I2C_MODE_STANDARD;
-	    	break;
-        case I2C_SMBUS_BYTE_DATA:
-	    	len = 1;
-	    	buffer = &data->byte;
-	    	iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
-	    	break;
-        case I2C_SMBUS_WORD_DATA:
-	    	len = 2;
-	    	cur_word = cpu_to_le16(data->word);
-	    	buffer = (u8 *)&cur_word;
-	    	iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
-		break;
-        case I2C_SMBUS_BLOCK_DATA:
-	    	len = data->block[0];
-	    	buffer = &data->block[1];
-	    	iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
-		break;
-        default:
-	    	return -1;
-	}
-
-	/* Turn a standardsub read into a combined mode access */
- 	if (read_write == I2C_SMBUS_READ
- 	    && (iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB) {
- 		iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK;
- 		iface->cur_mode |= KW_I2C_MODE_COMBINED;
- 	}
-
-	/* Original driver had this limitation */
-	if (len > 32)
-		len = 32;
-
-	if (pmac_low_i2c_lock(iface->node))
-		return -ENXIO;
-
-	pr_debug("chan: %d, addr: 0x%x, transfer len: %d, read: %d\n",
-		chan->chan_no, addr, len, read_write == I2C_SMBUS_READ);
-
-	iface->data = buffer;
-	iface->datalen = len;
-	iface->state = state_addr;
-	iface->result = 0;
-	iface->read_write = read_write;
-	
-	/* Setup channel & clear pending irqs */
-	write_reg(reg_isr, read_reg(reg_isr));
-	write_reg(reg_mode, iface->cur_mode | (chan->chan_no << 4));
-	write_reg(reg_status, 0);
-
-	/* Set up address and r/w bit */
-	write_reg(reg_addr,
-		(addr << 1) | ((read_write == I2C_SMBUS_READ) ? 0x01 : 0x00));
-
-	/* Set up the sub address */
-	if ((iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB
-	    || (iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_COMBINED)
-		write_reg(reg_subaddr, command);
-
-#ifndef POLLED_MODE
-	/* Arm timeout */
-	iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
-	add_timer(&iface->timeout_timer);
-#endif
-
-	/* Start sending address & enable interrupt*/
-	write_reg(reg_control, KW_I2C_CTL_XADDR);
-	write_reg(reg_ier, KW_I2C_IRQ_MASK);
-
-#ifdef POLLED_MODE
-	pr_debug("using polled mode...\n");
-	/* State machine, to turn into an interrupt handler */
-	while(iface->state != state_idle) {
-		unsigned long flags;
-
-		u8 isr = wait_interrupt(iface);
-		spin_lock_irqsave(&iface->lock, flags);
-		handle_interrupt(iface, isr);
-		spin_unlock_irqrestore(&iface->lock, flags);
-	}
-#else /* POLLED_MODE */
-	pr_debug("using interrupt mode...\n");
-	wait_for_completion(&iface->complete);	
-#endif /* POLLED_MODE */	
-
-	rc = iface->result;	
-	pr_debug("transfer done, result: %d\n", rc);
-
-	if (rc == 0 && size == I2C_SMBUS_WORD_DATA && read_write == I2C_SMBUS_READ)
-	    	data->word = le16_to_cpu(cur_word);
-	
-	/* Release sem */
-	pmac_low_i2c_unlock(iface->node);
-	
-	return rc;
-}
-
-/*
- * Generic i2c master transfer entrypoint
- */
-static int
-keywest_xfer(	struct i2c_adapter *adap,
-		struct i2c_msg *msgs, 
-		int num)
-{
-	struct keywest_chan* chan = i2c_get_adapdata(adap);
-	struct keywest_iface* iface = chan->iface;
-	struct i2c_msg *pmsg;
-	int i, completed;
-	int rc = 0;
-
-	if (iface->state == state_dead)
-		return -ENXIO;
-
-	if (pmac_low_i2c_lock(iface->node))
-		return -ENXIO;
-
-	/* Set adapter to standard mode */
-	iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK;
-	iface->cur_mode |= KW_I2C_MODE_STANDARD;
-
-	completed = 0;
-	for (i = 0; rc >= 0 && i < num;) {
-		u8 addr;
-		
-		pmsg = &msgs[i++];
-		addr = pmsg->addr;
-		if (pmsg->flags & I2C_M_TEN) {
-			printk(KERN_ERR "i2c-keywest: 10 bits addr not supported !\n");
-			rc = -EINVAL;
-			break;
-		}
-		pr_debug("xfer: chan: %d, doing %s %d bytes to 0x%02x - %d of %d messages\n",
-		     chan->chan_no,
-		     pmsg->flags & I2C_M_RD ? "read" : "write",
-                     pmsg->len, addr, i, num);
-    
-		/* Setup channel & clear pending irqs */
-		write_reg(reg_mode, iface->cur_mode | (chan->chan_no << 4));
-		write_reg(reg_isr, read_reg(reg_isr));
-		write_reg(reg_status, 0);
-		
-		iface->data = pmsg->buf;
-		iface->datalen = pmsg->len;
-		iface->state = state_addr;
-		iface->result = 0;
-		if (pmsg->flags & I2C_M_RD)
-			iface->read_write = I2C_SMBUS_READ;
-		else
-			iface->read_write = I2C_SMBUS_WRITE;
-
-		/* Set up address and r/w bit */
-		if (pmsg->flags & I2C_M_REV_DIR_ADDR)
-			addr ^= 1;		
-		write_reg(reg_addr,
-			(addr << 1) |
-			((iface->read_write == I2C_SMBUS_READ) ? 0x01 : 0x00));
-
-#ifndef POLLED_MODE
-		/* Arm timeout */
-		iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
-		add_timer(&iface->timeout_timer);
-#endif
-
-		/* Start sending address & enable interrupt*/
-		write_reg(reg_ier, KW_I2C_IRQ_MASK);
-		write_reg(reg_control, KW_I2C_CTL_XADDR);
-
-#ifdef POLLED_MODE
-		pr_debug("using polled mode...\n");
-		/* State machine, to turn into an interrupt handler */
-		while(iface->state != state_idle) {
-			u8 isr = wait_interrupt(iface);
-			handle_interrupt(iface, isr);
-		}
-#else /* POLLED_MODE */
-		pr_debug("using interrupt mode...\n");
-		wait_for_completion(&iface->complete);	
-#endif /* POLLED_MODE */	
-
-		rc = iface->result;
-		if (rc == 0)
-			completed++;
-		pr_debug("transfer done, result: %d\n", rc);
-	}
-
-	/* Release sem */
-	pmac_low_i2c_unlock(iface->node);
-
-	return completed;
-}
-
-static u32
-keywest_func(struct i2c_adapter * adapter)
-{
-	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
-	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
-	       I2C_FUNC_SMBUS_BLOCK_DATA;
-}
-
-/* For now, we only handle combined mode (smbus) */
-static struct i2c_algorithm keywest_algorithm = {
-	.smbus_xfer	= keywest_smbus_xfer,
-	.master_xfer	= keywest_xfer,
-	.functionality	= keywest_func,
-};
-
-
-static int
-create_iface(struct device_node *np, struct device *dev)
-{
-	unsigned long steps;
-	unsigned bsteps, tsize, i, nchan, addroffset;
-	struct keywest_iface* iface;
-	u32 *psteps, *prate;
-	int rc;
-
-	if (np->n_intrs < 1 || np->n_addrs < 1) {
-		printk(KERN_ERR "%s: Missing interrupt or address !\n",
-		       np->full_name);
-		return -ENODEV;
-	}
-	if (pmac_low_i2c_lock(np))
-		return -ENODEV;
-
-	psteps = (u32 *)get_property(np, "AAPL,address-step", NULL);
-	steps = psteps ? (*psteps) : 0x10;
-
-	/* Hrm... maybe we can be smarter here */
-	for (bsteps = 0; (steps & 0x01) == 0; bsteps++)
-		steps >>= 1;
-
-	if (np->parent->name[0] == 'u') {
-		nchan = 2;
-		addroffset = 3;
-	} else {
-		addroffset = 0;
-		nchan = 1;
-	}
-
-	tsize = sizeof(struct keywest_iface) +
-		(sizeof(struct keywest_chan) + 4) * nchan;
-	iface = kzalloc(tsize, GFP_KERNEL);
-	if (iface == NULL) {
-		printk(KERN_ERR "i2c-keywest: can't allocate inteface !\n");
-		pmac_low_i2c_unlock(np);
-		return -ENOMEM;
-	}
-	spin_lock_init(&iface->lock);
-	init_completion(&iface->complete);
-	iface->node = of_node_get(np);
-	iface->bsteps = bsteps;
-	iface->chan_count = nchan;
-	iface->state = state_idle;
-	iface->irq = np->intrs[0].line;
-	iface->channels = (struct keywest_chan *)
-		(((unsigned long)(iface + 1) + 3UL) & ~3UL);
-	iface->base = ioremap(np->addrs[0].address + addroffset,
-						np->addrs[0].size);
-	if (!iface->base) {
-		printk(KERN_ERR "i2c-keywest: can't map inteface !\n");
-		kfree(iface);
-		pmac_low_i2c_unlock(np);
-		return -ENOMEM;
-	}
-
-#ifndef POLLED_MODE
-	init_timer(&iface->timeout_timer);
-	iface->timeout_timer.function = keywest_timeout;
-	iface->timeout_timer.data = (unsigned long)iface;
-#endif
-
-	/* Select interface rate */
-	iface->cur_mode = KW_I2C_MODE_100KHZ;
-	prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL);
-	if (prate) switch(*prate) {
-	case 100:
-		iface->cur_mode = KW_I2C_MODE_100KHZ;
-		break;
-	case 50:
-		iface->cur_mode = KW_I2C_MODE_50KHZ;
-		break;
-	case 25:
-		iface->cur_mode = KW_I2C_MODE_25KHZ;
-		break;
-	default:
-		printk(KERN_WARNING "i2c-keywest: unknown rate %ldKhz, using 100KHz\n",
-		       (long)*prate);
-	}
-	
-	/* Select standard mode by default */
-	iface->cur_mode |= KW_I2C_MODE_STANDARD;
-	
-	/* Write mode */
-	write_reg(reg_mode, iface->cur_mode);
-	
-	/* Switch interrupts off & clear them*/
-	write_reg(reg_ier, 0x00);
-	write_reg(reg_isr, KW_I2C_IRQ_MASK);
-
-#ifndef POLLED_MODE
-	/* Request chip interrupt */	
-	rc = request_irq(iface->irq, keywest_irq, SA_INTERRUPT, "keywest i2c", iface);
-	if (rc) {
-		printk(KERN_ERR "i2c-keywest: can't get IRQ %d !\n", iface->irq);
-		iounmap(iface->base);
-		kfree(iface);
-		pmac_low_i2c_unlock(np);
-		return -ENODEV;
-	}
-#endif /* POLLED_MODE */
-
-	pmac_low_i2c_unlock(np);
-	dev_set_drvdata(dev, iface);
-	
-	for (i=0; i<nchan; i++) {
-		struct keywest_chan* chan = &iface->channels[i];
-		
-		sprintf(chan->adapter.name, "%s %d", np->parent->name, i);
-		chan->iface = iface;
-		chan->chan_no = i;
-		chan->adapter.algo = &keywest_algorithm;
-		chan->adapter.algo_data = NULL;
-		chan->adapter.client_register = NULL;
-		chan->adapter.client_unregister = NULL;
-		i2c_set_adapdata(&chan->adapter, chan);
-		chan->adapter.dev.parent = dev;
-
-		rc = i2c_add_adapter(&chan->adapter);
-		if (rc) {
-			printk("i2c-keywest.c: Adapter %s registration failed\n",
-				chan->adapter.name);
-			i2c_set_adapdata(&chan->adapter, NULL);
-		}
-	}
-
-	printk(KERN_INFO "Found KeyWest i2c on \"%s\", %d channel%s, stepping: %d bits\n",
-		np->parent->name, nchan, nchan > 1 ? "s" : "", bsteps);
-		
-	return 0;
-}
-
-static int
-dispose_iface(struct device *dev)
-{
-	struct keywest_iface *iface = dev_get_drvdata(dev);
-	int i, rc;
-	
-	/* Make sure we stop all activity */
-	if (pmac_low_i2c_lock(iface->node))
-		return -ENODEV;
-
-#ifndef POLLED_MODE
-	spin_lock_irq(&iface->lock);
-	while (iface->state != state_idle) {
-		spin_unlock_irq(&iface->lock);
-		msleep(100);
-		spin_lock_irq(&iface->lock);
-	}
-#endif /* POLLED_MODE */
-	iface->state = state_dead;
-#ifndef POLLED_MODE
-	spin_unlock_irq(&iface->lock);
-	free_irq(iface->irq, iface);
-#endif /* POLLED_MODE */
-
-	pmac_low_i2c_unlock(iface->node);
-
-	/* Release all channels */
-	for (i=0; i<iface->chan_count; i++) {
-		struct keywest_chan* chan = &iface->channels[i];
-		if (i2c_get_adapdata(&chan->adapter) == NULL)
-			continue;
-		rc = i2c_del_adapter(&chan->adapter);
-		i2c_set_adapdata(&chan->adapter, NULL);
-		/* We aren't that prepared to deal with this... */
-		if (rc)
-			printk("i2c-keywest.c: i2c_del_adapter failed, that's bad !\n");
-	}
-	iounmap(iface->base);
-	dev_set_drvdata(dev, NULL);
-	of_node_put(iface->node);
-	kfree(iface);
-
-	return 0;
-}
-
-static int
-create_iface_macio(struct macio_dev* dev, const struct of_device_id *match)
-{
-	return create_iface(dev->ofdev.node, &dev->ofdev.dev);
-}
-
-static int
-dispose_iface_macio(struct macio_dev* dev)
-{
-	return dispose_iface(&dev->ofdev.dev);
-}
-
-static int
-create_iface_of_platform(struct of_device* dev, const struct of_device_id *match)
-{
-	return create_iface(dev->node, &dev->dev);
-}
-
-static int
-dispose_iface_of_platform(struct of_device* dev)
-{
-	return dispose_iface(&dev->dev);
-}
-
-static struct of_device_id i2c_keywest_match[] = 
-{
-	{
-	.type		= "i2c",
-	.compatible	= "keywest"
-	},
-	{},
-};
-
-static struct macio_driver i2c_keywest_macio_driver = 
-{
-	.owner		= THIS_MODULE,
-	.name 		= "i2c-keywest",
-	.match_table	= i2c_keywest_match,
-	.probe		= create_iface_macio,
-	.remove		= dispose_iface_macio
-};
-
-static struct of_platform_driver i2c_keywest_of_platform_driver = 
-{
-	.owner		= THIS_MODULE,
-	.name 		= "i2c-keywest",
-	.match_table	= i2c_keywest_match,
-	.probe		= create_iface_of_platform,
-	.remove		= dispose_iface_of_platform
-};
-
-static int __init
-i2c_keywest_init(void)
-{
-	of_register_driver(&i2c_keywest_of_platform_driver);
-	macio_register_driver(&i2c_keywest_macio_driver);
-
-	return 0;
-}
-
-static void __exit
-i2c_keywest_cleanup(void)
-{
-	of_unregister_driver(&i2c_keywest_of_platform_driver);
-	macio_unregister_driver(&i2c_keywest_macio_driver);
-}
-
-module_init(i2c_keywest_init);
-module_exit(i2c_keywest_cleanup);
diff --git a/drivers/i2c/busses/i2c-keywest.h b/drivers/i2c/busses/i2c-keywest.h
deleted file mode 100644
index c5022e1ca6f..00000000000
--- a/drivers/i2c/busses/i2c-keywest.h
+++ /dev/null
@@ -1,108 +0,0 @@
-#ifndef __I2C_KEYWEST_H__
-#define __I2C_KEYWEST_H__
-
-/* The Tumbler audio equalizer can be really slow sometimes */
-#define POLL_TIMEOUT		(2*HZ)
-
-/* Register indices */
-typedef enum {
-	reg_mode = 0,
-	reg_control,
-	reg_status,
-	reg_isr,
-	reg_ier,
-	reg_addr,
-	reg_subaddr,
-	reg_data
-} reg_t;
-
-
-/* Mode register */
-#define KW_I2C_MODE_100KHZ	0x00
-#define KW_I2C_MODE_50KHZ	0x01
-#define KW_I2C_MODE_25KHZ	0x02
-#define KW_I2C_MODE_DUMB	0x00
-#define KW_I2C_MODE_STANDARD	0x04
-#define KW_I2C_MODE_STANDARDSUB	0x08
-#define KW_I2C_MODE_COMBINED	0x0C
-#define KW_I2C_MODE_MODE_MASK	0x0C
-#define KW_I2C_MODE_CHAN_MASK	0xF0
-
-/* Control register */
-#define KW_I2C_CTL_AAK		0x01
-#define KW_I2C_CTL_XADDR	0x02
-#define KW_I2C_CTL_STOP		0x04
-#define KW_I2C_CTL_START	0x08
-
-/* Status register */
-#define KW_I2C_STAT_BUSY	0x01
-#define KW_I2C_STAT_LAST_AAK	0x02
-#define KW_I2C_STAT_LAST_RW	0x04
-#define KW_I2C_STAT_SDA		0x08
-#define KW_I2C_STAT_SCL		0x10
-
-/* IER & ISR registers */
-#define KW_I2C_IRQ_DATA		0x01
-#define KW_I2C_IRQ_ADDR		0x02
-#define KW_I2C_IRQ_STOP		0x04
-#define KW_I2C_IRQ_START	0x08
-#define KW_I2C_IRQ_MASK		0x0F
-
-/* Physical interface */
-struct keywest_iface
-{
-	struct device_node	*node;
-	void __iomem *		base;
-	unsigned		bsteps;
-	int			irq;
-	spinlock_t		lock;
-	struct keywest_chan	*channels;
-	unsigned		chan_count;
-	u8			cur_mode;
-	char			read_write;
-	u8			*data;
-	unsigned		datalen;
-	int			state;
-	int			result;
-	struct timer_list	timeout_timer;
-	struct completion	complete;
-};
-
-enum {
-	state_idle,
-	state_addr,
-	state_read,
-	state_write,
-	state_stop,
-	state_dead
-};
-
-/* Channel on an interface */
-struct keywest_chan
-{
-	struct i2c_adapter	adapter;
-	struct keywest_iface*	iface;
-	unsigned		chan_no;
-};
-
-/* Register access */
-
-static inline u8 __read_reg(struct keywest_iface *iface, reg_t reg)
-{
-	return in_8(iface->base
-		+ (((unsigned)reg) << iface->bsteps));
-}
-
-static inline void __write_reg(struct keywest_iface *iface, reg_t reg, u8 val)
-{
-	out_8(iface->base
-		+ (((unsigned)reg) << iface->bsteps), val);
-	(void)__read_reg(iface, reg_subaddr);
-}
-
-#define write_reg(reg, val)	__write_reg(iface, reg, val) 
-#define read_reg(reg)		__read_reg(iface, reg) 
-
-
-
-#endif /* __I2C_KEYWEST_H__ */
diff --git a/drivers/i2c/busses/i2c-pmac-smu.c b/drivers/i2c/busses/i2c-pmac-smu.c
deleted file mode 100644
index bfefe7f7a53..00000000000
--- a/drivers/i2c/busses/i2c-pmac-smu.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
-    i2c Support for Apple SMU Controller
-
-    Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp.
-                       <benh@kernel.crashing.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/completion.h>
-#include <linux/device.h>
-#include <asm/prom.h>
-#include <asm/of_device.h>
-#include <asm/smu.h>
-
-static int probe;
-
-MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
-MODULE_DESCRIPTION("I2C driver for Apple's SMU");
-MODULE_LICENSE("GPL");
-module_param(probe, bool, 0);
-
-
-/* Physical interface */
-struct smu_iface
-{
-	struct i2c_adapter	adapter;
-	struct completion	complete;
-	u32			busid;
-};
-
-static void smu_i2c_done(struct smu_i2c_cmd *cmd, void *misc)
-{
-	struct smu_iface	*iface = misc;
-	complete(&iface->complete);
-}
-
-/*
- * SMBUS-type transfer entrypoint
- */
-static s32 smu_smbus_xfer(	struct i2c_adapter*	adap,
-				u16			addr,
-				unsigned short		flags,
-				char			read_write,
-				u8			command,
-				int			size,
-				union i2c_smbus_data*	data)
-{
-	struct smu_iface	*iface = i2c_get_adapdata(adap);
-	struct smu_i2c_cmd	cmd;
-	int			rc = 0;
-	int			read = (read_write == I2C_SMBUS_READ);
-
-	cmd.info.bus = iface->busid;
-	cmd.info.devaddr = (addr << 1) | (read ? 0x01 : 0x00);
-
-	/* Prepare datas & select mode */
-	switch (size) {
-        case I2C_SMBUS_QUICK:
-		cmd.info.type = SMU_I2C_TRANSFER_SIMPLE;
-		cmd.info.datalen = 0;
-	    	break;
-        case I2C_SMBUS_BYTE:
-		cmd.info.type = SMU_I2C_TRANSFER_SIMPLE;
-		cmd.info.datalen = 1;
-		if (!read)
-			cmd.info.data[0] = data->byte;
-	    	break;
-        case I2C_SMBUS_BYTE_DATA:
-		cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
-		cmd.info.datalen = 1;
-		cmd.info.sublen = 1;
-		cmd.info.subaddr[0] = command;
-		cmd.info.subaddr[1] = 0;
-		cmd.info.subaddr[2] = 0;
-		if (!read)
-			cmd.info.data[0] = data->byte;
-	    	break;
-        case I2C_SMBUS_WORD_DATA:
-		cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
-		cmd.info.datalen = 2;
-		cmd.info.sublen = 1;
-		cmd.info.subaddr[0] = command;
-		cmd.info.subaddr[1] = 0;
-		cmd.info.subaddr[2] = 0;
-		if (!read) {
-			cmd.info.data[0] = data->byte & 0xff;
-			cmd.info.data[1] = (data->byte >> 8) & 0xff;
-		}
-		break;
-	/* Note that these are broken vs. the expected smbus API where
-	 * on reads, the lenght is actually returned from the function,
-	 * but I think the current API makes no sense and I don't want
-	 * any driver that I haven't verified for correctness to go
-	 * anywhere near a pmac i2c bus anyway ...
-	 */
-        case I2C_SMBUS_BLOCK_DATA:
-		cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
-		cmd.info.datalen = data->block[0] + 1;
-		if (cmd.info.datalen > 6)
-			return -EINVAL;
-		if (!read)
-			memcpy(cmd.info.data, data->block, cmd.info.datalen);
-		cmd.info.sublen = 1;
-		cmd.info.subaddr[0] = command;
-		cmd.info.subaddr[1] = 0;
-		cmd.info.subaddr[2] = 0;
-		break;
-	case I2C_SMBUS_I2C_BLOCK_DATA:
-		cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
-		cmd.info.datalen = data->block[0];
-		if (cmd.info.datalen > 7)
-			return -EINVAL;
-		if (!read)
-			memcpy(cmd.info.data, &data->block[1],
-			       cmd.info.datalen);
-		cmd.info.sublen = 1;
-		cmd.info.subaddr[0] = command;
-		cmd.info.subaddr[1] = 0;
-		cmd.info.subaddr[2] = 0;
-		break;
-
-        default:
-	    	return -EINVAL;
-	}
-
-	/* Turn a standardsub read into a combined mode access */
- 	if (read_write == I2C_SMBUS_READ &&
-	    cmd.info.type == SMU_I2C_TRANSFER_STDSUB)
-		cmd.info.type = SMU_I2C_TRANSFER_COMBINED;
-
-	/* Finish filling command and submit it */
-	cmd.done = smu_i2c_done;
-	cmd.misc = iface;
-	rc = smu_queue_i2c(&cmd);
-	if (rc < 0)
-		return rc;
-	wait_for_completion(&iface->complete);
-	rc = cmd.status;
-
-	if (!read || rc < 0)
-		return rc;
-
-	switch (size) {
-        case I2C_SMBUS_BYTE:
-        case I2C_SMBUS_BYTE_DATA:
-		data->byte = cmd.info.data[0];
-	    	break;
-        case I2C_SMBUS_WORD_DATA:
-		data->word = ((u16)cmd.info.data[1]) << 8;
-		data->word |= cmd.info.data[0];
-		break;
-	/* Note that these are broken vs. the expected smbus API where
-	 * on reads, the lenght is actually returned from the function,
-	 * but I think the current API makes no sense and I don't want
-	 * any driver that I haven't verified for correctness to go
-	 * anywhere near a pmac i2c bus anyway ...
-	 */
-        case I2C_SMBUS_BLOCK_DATA:
-	case I2C_SMBUS_I2C_BLOCK_DATA:
-		memcpy(&data->block[0], cmd.info.data, cmd.info.datalen);
-		break;
-	}
-
-	return rc;
-}
-
-static u32
-smu_smbus_func(struct i2c_adapter * adapter)
-{
-	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
-	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
-	       I2C_FUNC_SMBUS_BLOCK_DATA;
-}
-
-/* For now, we only handle combined mode (smbus) */
-static struct i2c_algorithm smu_algorithm = {
-	.smbus_xfer	= smu_smbus_xfer,
-	.functionality	= smu_smbus_func,
-};
-
-static int create_iface(struct device_node *np, struct device *dev)
-{
-	struct smu_iface* iface;
-	u32 *reg, busid;
-	int rc;
-
-	reg = (u32 *)get_property(np, "reg", NULL);
-	if (reg == NULL) {
-		printk(KERN_ERR "i2c-pmac-smu: can't find bus number !\n");
-		return -ENXIO;
-	}
-	busid = *reg;
-
-	iface = kzalloc(sizeof(struct smu_iface), GFP_KERNEL);
-	if (iface == NULL) {
-		printk(KERN_ERR "i2c-pmac-smu: can't allocate inteface !\n");
-		return -ENOMEM;
-	}
-	init_completion(&iface->complete);
-	iface->busid = busid;
-
-	dev_set_drvdata(dev, iface);
-
-	sprintf(iface->adapter.name, "smu-i2c-%02x", busid);
-	iface->adapter.algo = &smu_algorithm;
-	iface->adapter.algo_data = NULL;
-	iface->adapter.client_register = NULL;
-	iface->adapter.client_unregister = NULL;
-	i2c_set_adapdata(&iface->adapter, iface);
-	iface->adapter.dev.parent = dev;
-
-	rc = i2c_add_adapter(&iface->adapter);
-	if (rc) {
-		printk(KERN_ERR "i2c-pamc-smu.c: Adapter %s registration "
-		       "failed\n", iface->adapter.name);
-		i2c_set_adapdata(&iface->adapter, NULL);
-	}
-
-	if (probe) {
-		unsigned char addr;
-		printk("Probe: ");
-		for (addr = 0x00; addr <= 0x7f; addr++) {
-			if (i2c_smbus_xfer(&iface->adapter,addr,
-					   0,0,0,I2C_SMBUS_QUICK,NULL) >= 0)
-				printk("%02x ", addr);
-		}
-		printk("\n");
-	}
-
-	printk(KERN_INFO "SMU i2c bus %x registered\n", busid);
-
-	return 0;
-}
-
-static int dispose_iface(struct device *dev)
-{
-	struct smu_iface *iface = dev_get_drvdata(dev);
-	int rc;
-
-	rc = i2c_del_adapter(&iface->adapter);
-	i2c_set_adapdata(&iface->adapter, NULL);
-	/* We aren't that prepared to deal with this... */
-	if (rc)
-		printk("i2c-pmac-smu.c: Failed to remove bus %s !\n",
-		       iface->adapter.name);
-	dev_set_drvdata(dev, NULL);
-	kfree(iface);
-
-	return 0;
-}
-
-
-static int create_iface_of_platform(struct of_device* dev,
-				    const struct of_device_id *match)
-{
-	return create_iface(dev->node, &dev->dev);
-}
-
-
-static int dispose_iface_of_platform(struct of_device* dev)
-{
-	return dispose_iface(&dev->dev);
-}
-
-
-static struct of_device_id i2c_smu_match[] =
-{
-	{
-		.compatible	= "smu-i2c",
-	},
-	{},
-};
-static struct of_platform_driver i2c_smu_of_platform_driver =
-{
-	.name 		= "i2c-smu",
-	.match_table	= i2c_smu_match,
-	.probe		= create_iface_of_platform,
-	.remove		= dispose_iface_of_platform
-};
-
-
-static int __init i2c_pmac_smu_init(void)
-{
-	of_register_driver(&i2c_smu_of_platform_driver);
-	return 0;
-}
-
-
-static void __exit i2c_pmac_smu_cleanup(void)
-{
-	of_unregister_driver(&i2c_smu_of_platform_driver);
-}
-
-module_init(i2c_pmac_smu_init);
-module_exit(i2c_pmac_smu_cleanup);
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
new file mode 100644
index 00000000000..df786eb5529
--- /dev/null
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -0,0 +1,290 @@
+/*
+    i2c Support for Apple SMU Controller
+
+    Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp.
+                       <benh@kernel.crashing.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/prom.h>
+#include <asm/pmac_low_i2c.h>
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("I2C driver for Apple PowerMac");
+MODULE_LICENSE("GPL");
+
+/*
+ * SMBUS-type transfer entrypoint
+ */
+static s32 i2c_powermac_smbus_xfer(	struct i2c_adapter*	adap,
+					u16			addr,
+					unsigned short		flags,
+					char			read_write,
+					u8			command,
+					int			size,
+					union i2c_smbus_data*	data)
+{
+	struct pmac_i2c_bus	*bus = i2c_get_adapdata(adap);
+	int			rc = 0;
+	int			read = (read_write == I2C_SMBUS_READ);
+	int			addrdir = (addr << 1) | read;
+	u8			local[2];
+
+	rc = pmac_i2c_open(bus, 0);
+	if (rc)
+		return rc;
+
+	switch (size) {
+        case I2C_SMBUS_QUICK:
+		rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
+		if (rc)
+			goto bail;
+		rc = pmac_i2c_xfer(bus, addrdir, 0, 0, NULL, 0);
+	    	break;
+        case I2C_SMBUS_BYTE:
+		rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
+		if (rc)
+			goto bail;
+		rc = pmac_i2c_xfer(bus, addrdir, 0, 0, &data->byte, 1);
+	    	break;
+        case I2C_SMBUS_BYTE_DATA:
+		rc = pmac_i2c_setmode(bus, read ?
+				      pmac_i2c_mode_combined :
+				      pmac_i2c_mode_stdsub);
+		if (rc)
+			goto bail;
+		rc = pmac_i2c_xfer(bus, addrdir, 1, command, &data->byte, 1);
+	    	break;
+        case I2C_SMBUS_WORD_DATA:
+		rc = pmac_i2c_setmode(bus, read ?
+				      pmac_i2c_mode_combined :
+				      pmac_i2c_mode_stdsub);
+		if (rc)
+			goto bail;
+		if (!read) {
+			local[0] = data->word & 0xff;
+			local[1] = (data->word >> 8) & 0xff;
+		}
+		rc = pmac_i2c_xfer(bus, addrdir, 1, command, local, 2);
+		if (rc == 0 && read) {
+			data->word = ((u16)local[1]) << 8;
+			data->word |= local[0];
+		}
+	    	break;
+
+	/* Note that these are broken vs. the expected smbus API where
+	 * on reads, the lenght is actually returned from the function,
+	 * but I think the current API makes no sense and I don't want
+	 * any driver that I haven't verified for correctness to go
+	 * anywhere near a pmac i2c bus anyway ...
+	 *
+	 * I'm also not completely sure what kind of phases to do between
+	 * the actual command and the data (what I am _supposed_ to do that
+	 * is). For now, I assume writes are a single stream and reads have
+	 * a repeat start/addr phase (but not stop in between)
+	 */
+        case I2C_SMBUS_BLOCK_DATA:
+		rc = pmac_i2c_setmode(bus, read ?
+				      pmac_i2c_mode_combined :
+				      pmac_i2c_mode_stdsub);
+		if (rc)
+			goto bail;
+		rc = pmac_i2c_xfer(bus, addrdir, 1, command, data->block,
+				   data->block[0] + 1);
+
+		break;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		rc = pmac_i2c_setmode(bus, read ?
+				      pmac_i2c_mode_combined :
+				      pmac_i2c_mode_stdsub);
+		if (rc)
+			goto bail;
+		rc = pmac_i2c_xfer(bus, addrdir, 1, command,
+				   read ? data->block : &data->block[1],
+				   data->block[0]);
+		break;
+
+        default:
+	    	rc = -EINVAL;
+	}
+ bail:
+	pmac_i2c_close(bus);
+	return rc;
+}
+
+/*
+ * Generic i2c master transfer entrypoint. This driver only support single
+ * messages (for "lame i2c" transfers). Anything else should use the smbus
+ * entry point
+ */
+static int i2c_powermac_master_xfer(	struct i2c_adapter *adap,
+					struct i2c_msg *msgs,
+					int num)
+{
+	struct pmac_i2c_bus	*bus = i2c_get_adapdata(adap);
+	int			rc = 0;
+	int			read;
+	int			addrdir;
+
+	if (num != 1)
+		return -EINVAL;
+	if (msgs->flags & I2C_M_TEN)
+		return -EINVAL;
+	read = (msgs->flags & I2C_M_RD) != 0;
+	addrdir = (msgs->addr << 1) | read;
+	if (msgs->flags & I2C_M_REV_DIR_ADDR)
+		addrdir ^= 1;
+
+	rc = pmac_i2c_open(bus, 0);
+	if (rc)
+		return rc;
+	rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
+	if (rc)
+		goto bail;
+	rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
+ bail:
+	pmac_i2c_close(bus);
+	return rc < 0 ? rc : msgs->len;
+}
+
+static u32 i2c_powermac_func(struct i2c_adapter * adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+		I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+		I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_I2C;
+}
+
+/* For now, we only handle smbus */
+static struct i2c_algorithm i2c_powermac_algorithm = {
+	.smbus_xfer	= i2c_powermac_smbus_xfer,
+	.master_xfer	= i2c_powermac_master_xfer,
+	.functionality	= i2c_powermac_func,
+};
+
+
+static int i2c_powermac_remove(struct device *dev)
+{
+	struct i2c_adapter	*adapter = dev_get_drvdata(dev);
+	struct pmac_i2c_bus	*bus = i2c_get_adapdata(adapter);
+	int			rc;
+
+	rc = i2c_del_adapter(adapter);
+	pmac_i2c_detach_adapter(bus, adapter);
+	i2c_set_adapdata(adapter, NULL);
+	/* We aren't that prepared to deal with this... */
+	if (rc)
+		printk("i2c-powermac.c: Failed to remove bus %s !\n",
+		       adapter->name);
+	dev_set_drvdata(dev, NULL);
+	kfree(adapter);
+
+	return 0;
+}
+
+
+static int i2c_powermac_probe(struct device *dev)
+{
+	struct pmac_i2c_bus *bus = dev->platform_data;
+	struct device_node *parent = NULL;
+	struct i2c_adapter *adapter;
+	char name[32], *basename;
+	int rc;
+
+	if (bus == NULL)
+		return -EINVAL;
+
+	/* Ok, now we need to make up a name for the interface that will
+	 * match what we used to do in the past, that is basically the
+	 * controller's parent device node for keywest. PMU didn't have a
+	 * naming convention and SMU has a different one
+	 */
+	switch(pmac_i2c_get_type(bus)) {
+	case pmac_i2c_bus_keywest:
+		parent = of_get_parent(pmac_i2c_get_controller(bus));
+		if (parent == NULL)
+			return -EINVAL;
+		basename = parent->name;
+		break;
+	case pmac_i2c_bus_pmu:
+		basename = "pmu";
+		break;
+	case pmac_i2c_bus_smu:
+		/* This is not what we used to do but I'm fixing drivers at
+		 * the same time as this change
+		 */
+		basename = "smu";
+		break;
+	default:
+		return -EINVAL;
+	}
+	snprintf(name, 32, "%s %d", basename, pmac_i2c_get_channel(bus));
+	of_node_put(parent);
+
+	adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
+	if (adapter == NULL) {
+		printk(KERN_ERR "i2c-powermac: can't allocate inteface !\n");
+		return -ENOMEM;
+	}
+	dev_set_drvdata(dev, adapter);
+	strcpy(adapter->name, name);
+	adapter->algo = &i2c_powermac_algorithm;
+	i2c_set_adapdata(adapter, bus);
+	adapter->dev.parent = dev;
+	pmac_i2c_attach_adapter(bus, adapter);
+	rc = i2c_add_adapter(adapter);
+	if (rc) {
+		printk(KERN_ERR "i2c-powermac: Adapter %s registration "
+		       "failed\n", name);
+		i2c_set_adapdata(adapter, NULL);
+		pmac_i2c_detach_adapter(bus, adapter);
+	}
+
+	printk(KERN_INFO "PowerMac i2c bus %s registered\n", name);
+	return rc;
+}
+
+
+static struct device_driver i2c_powermac_driver = {
+	.name = "i2c-powermac",
+	.bus = &platform_bus_type,
+	.probe = i2c_powermac_probe,
+	.remove = i2c_powermac_remove,
+};
+
+static int __init i2c_powermac_init(void)
+{
+	driver_register(&i2c_powermac_driver);
+	return 0;
+}
+
+
+static void __exit i2c_powermac_cleanup(void)
+{
+	driver_unregister(&i2c_powermac_driver);
+}
+
+module_init(i2c_powermac_init);
+module_exit(i2c_powermac_cleanup);
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 16b28357885..5013b1285e2 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1271,7 +1271,7 @@ static int
 pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
 {
 	struct device_node *np = pmif->node;
-	int *bidp, i;
+	int *bidp;
 
 	pmif->cable_80 = 0;
 	pmif->broken_dma = pmif->broken_dma_warn = 0;
@@ -1430,7 +1430,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match)
 	pmif = &pmac_ide[i];
 	hwif = &ide_hwifs[i];
 
-	if (mdev->ofdev.node->n_addrs == 0) {
+	if (macio_resource_count(mdev) == 0) {
 		printk(KERN_WARNING "ide%d: no address for %s\n",
 		       i, mdev->ofdev.node->full_name);
 		return -ENXIO;
@@ -1686,7 +1686,7 @@ pmac_ide_probe(void)
 #else
 	macio_register_driver(&pmac_ide_macio_driver);
 	pci_register_driver(&pmac_ide_pci_driver);
-#endif	
+#endif
 }
 
 #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index a0ea44c3e8b..7d4a0ac28c0 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -149,14 +149,14 @@ config MAC_EMUMOUSEBTN
 
 config THERM_WINDTUNNEL
 	tristate "Support for thermal management on Windtunnel G4s"
-	depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
+	depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
 	help
 	  This driver provides some thermostat and fan control for the desktop
 	  G4 "Windtunnel"
 
 config THERM_ADT746X
 	tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
-	depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
+	depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
 	help
 	  This driver provides some thermostat and fan control for the
           iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty
@@ -164,7 +164,7 @@ config THERM_ADT746X
 
 config THERM_PM72
 	tristate "Support for thermal management on PowerMac G5"
-	depends on I2C && I2C_KEYWEST && PPC_PMAC64
+	depends on I2C && I2C_POWERMAC && PPC_PMAC64
 	help
 	  This driver provides thermostat and fan control for the desktop
 	  G5 machines. 
@@ -175,14 +175,14 @@ config WINDFARM
 config WINDFARM_PM81
 	tristate "Support for thermal management on iMac G5"
 	depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
-	select I2C_PMAC_SMU
+	select I2C_POWERMAC
 	help
 	  This driver provides thermal control for the iMacG5
 
 config WINDFARM_PM91
 	tristate "Support for thermal management on PowerMac9,1"
 	depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
-	select I2C_PMAC_SMU
+	select I2C_POWERMAC
 	help
 	  This driver provides thermal control for the PowerMac9,1
           which is the recent (SMU based) single CPU desktop G5
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index 228e1852a83..2a545ceb523 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -3,6 +3,13 @@
  * a MacIO ASIC. Interface to new driver model mostly
  * stolen from the PCI version.
  * 
+ *  Copyright (C) 2005 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
  * TODO:
  * 
  *  - Don't probe below media bay by default, but instead provide
@@ -218,12 +225,14 @@ postcore_initcall(macio_bus_driver_init);
 
 
 /**
- * macio_release_dev - free a macio device structure when all users of it are finished.
+ * macio_release_dev - free a macio device structure when all users of it are
+ * finished.
  * @dev: device that's been disconnected
  *
- * Will be called only by the device core when all users of this macio device are
- * done. This currently means never as we don't hot remove any macio device yet,
- * though that will happen with mediabay based devices in a later implementation.
+ * Will be called only by the device core when all users of this macio device
+ * are done. This currently means never as we don't hot remove any macio
+ * device yet, though that will happen with mediabay based devices in a later
+ * implementation.
  */
 static void macio_release_dev(struct device *dev)
 {
@@ -242,49 +251,114 @@ static void macio_release_dev(struct device *dev)
  * If this routine returns non-null, then the resource is completely
  * skipped.
  */
-static int macio_resource_quirks(struct device_node *np, struct resource *res, int index)
+static int macio_resource_quirks(struct device_node *np, struct resource *res,
+				 int index)
 {
 	if (res->flags & IORESOURCE_MEM) {
 		/* Grand Central has too large resource 0 on some machines */
-		if (index == 0 && !strcmp(np->name, "gc")) {
-			np->addrs[0].size = 0x20000;
+		if (index == 0 && !strcmp(np->name, "gc"))
 			res->end = res->start + 0x1ffff;
-		}
+
 		/* Airport has bogus resource 2 */
 		if (index >= 2 && !strcmp(np->name, "radio"))
 			return 1;
+
+#ifndef CONFIG_PPC64
 		/* DBDMAs may have bogus sizes */
-		if ((res->start & 0x0001f000) == 0x00008000) {
-			np->addrs[index].size = 0x100;
+		if ((res->start & 0x0001f000) == 0x00008000)
 			res->end = res->start + 0xff;
-		}
-		/* ESCC parent eats child resources. We could have added a level of hierarchy,
-		 * but I don't really feel the need for it */
+#endif /* CONFIG_PPC64 */
+
+		/* ESCC parent eats child resources. We could have added a
+		 * level of hierarchy, but I don't really feel the need
+		 * for it
+		 */
 		if (!strcmp(np->name, "escc"))
 			return 1;
+
 		/* ESCC has bogus resources >= 3 */
-		if (index >= 3 && !(strcmp(np->name, "ch-a") && strcmp(np->name, "ch-b")))
+		if (index >= 3 && !(strcmp(np->name, "ch-a") &&
+				    strcmp(np->name, "ch-b")))
 			return 1;
+
 		/* Media bay has too many resources, keep only first one */
 		if (index > 0 && !strcmp(np->name, "media-bay"))
 			return 1;
+
 		/* Some older IDE resources have bogus sizes */
 		if (!(strcmp(np->name, "IDE") && strcmp(np->name, "ATA") &&
 		      strcmp(np->type, "ide") && strcmp(np->type, "ata"))) {
-			if (index == 0 && np->addrs[0].size > 0x1000) {
-				np->addrs[0].size = 0x1000;
+			if (index == 0 && (res->end - res->start) > 0xfff)
 				res->end = res->start + 0xfff;
-			}
-			if (index == 1 && np->addrs[1].size > 0x100) {
-				np->addrs[1].size = 0x100;
+			if (index == 1 && (res->end - res->start) > 0xff)
 				res->end = res->start + 0xff;
-			}
 		}
 	}
 	return 0;
 }
 
 
+static void macio_setup_interrupts(struct macio_dev *dev)
+{
+	struct device_node *np = dev->ofdev.node;
+	int i,j;
+
+	/* For now, we use pre-parsed entries in the device-tree for
+	 * interrupt routing and addresses, but we should change that
+	 * to dynamically parsed entries and so get rid of most of the
+	 * clutter in struct device_node
+	 */
+	for (i = j = 0; i < np->n_intrs; i++) {
+		struct resource *res = &dev->interrupt[j];
+
+		if (j >= MACIO_DEV_COUNT_IRQS)
+			break;
+		res->start = np->intrs[i].line;
+		res->flags = IORESOURCE_IO;
+		if (np->intrs[j].sense)
+			res->flags |= IORESOURCE_IRQ_LOWLEVEL;
+		else
+			res->flags |= IORESOURCE_IRQ_HIGHEDGE;
+		res->name = dev->ofdev.dev.bus_id;
+		if (macio_resource_quirks(np, res, i))
+			memset(res, 0, sizeof(struct resource));
+		else
+			j++;
+	}
+	dev->n_interrupts = j;
+}
+
+static void macio_setup_resources(struct macio_dev *dev,
+				  struct resource *parent_res)
+{
+	struct device_node *np = dev->ofdev.node;
+	struct resource r;
+	int index;
+
+	for (index = 0; of_address_to_resource(np, index, &r) == 0; index++) {
+		struct resource *res = &dev->resource[index];
+		if (index >= MACIO_DEV_COUNT_RESOURCES)
+			break;
+		*res = r;
+		res->name = dev->ofdev.dev.bus_id;
+
+		if (macio_resource_quirks(np, res, index)) {
+			memset(res, 0, sizeof(struct resource));
+			continue;
+		}
+		/* Currently, we consider failure as harmless, this may
+		 * change in the future, once I've found all the device
+		 * tree bugs in older machines & worked around them
+		 */
+		if (insert_resource(parent_res, res)) {
+			printk(KERN_WARNING "Can't request resource "
+			       "%d for MacIO device %s\n",
+			       index, dev->ofdev.dev.bus_id);
+		}
+	}
+	dev->n_resources = index;
+}
+
 /**
  * macio_add_one_device - Add one device from OF node to the device tree
  * @chip: pointer to the macio_chip holding the device
@@ -294,12 +368,13 @@ static int macio_resource_quirks(struct device_node *np, struct resource *res, i
  * When media-bay is changed to hotswap drivers, this function will
  * be exposed to the bay driver some way...
  */
-static struct macio_dev * macio_add_one_device(struct macio_chip *chip, struct device *parent,
-					       struct device_node *np, struct macio_dev *in_bay,
+static struct macio_dev * macio_add_one_device(struct macio_chip *chip,
+					       struct device *parent,
+					       struct device_node *np,
+					       struct macio_dev *in_bay,
 					       struct resource *parent_res)
 {
 	struct macio_dev *dev;
-	int i, j;
 	u32 *reg;
 	
 	if (np == NULL)
@@ -326,7 +401,8 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip, struct d
 
 	/* MacIO itself has a different reg, we use it's PCI base */
 	if (np == chip->of_node) {
-		sprintf(dev->ofdev.dev.bus_id, "%1d.%08lx:%.*s", chip->lbus.index,
+		sprintf(dev->ofdev.dev.bus_id, "%1d.%08lx:%.*s",
+			chip->lbus.index,
 #ifdef CONFIG_PCI
 			pci_resource_start(chip->lbus.pdev, 0),
 #else
@@ -335,57 +411,16 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip, struct d
 			MAX_NODE_NAME_SIZE, np->name);
 	} else {
 		reg = (u32 *)get_property(np, "reg", NULL);
-		sprintf(dev->ofdev.dev.bus_id, "%1d.%08x:%.*s", chip->lbus.index,
+		sprintf(dev->ofdev.dev.bus_id, "%1d.%08x:%.*s",
+			chip->lbus.index,
 			reg ? *reg : 0, MAX_NODE_NAME_SIZE, np->name);
 	}
 
-	/* For now, we use pre-parsed entries in the device-tree for
-	 * interrupt routing and addresses, but we should change that
-	 * to dynamically parsed entries and so get rid of most of the
-	 * clutter in struct device_node
-	 */
-	for (i = j = 0; i < np->n_intrs; i++) {
-		struct resource *res = &dev->interrupt[j];
-
-		if (j >= MACIO_DEV_COUNT_IRQS)
-			break;
-		res->start = np->intrs[i].line;
-		res->flags = IORESOURCE_IO;
-		if (np->intrs[j].sense)
-			res->flags |= IORESOURCE_IRQ_LOWLEVEL;
-		else
-			res->flags |= IORESOURCE_IRQ_HIGHEDGE;
-		res->name = dev->ofdev.dev.bus_id;
-		if (macio_resource_quirks(np, res, i))
-			memset(res, 0, sizeof(struct resource));
-		else
-			j++;
-	}
-	dev->n_interrupts = j;
-	for (i = j = 0; i < np->n_addrs; i++) {
-		struct resource *res = &dev->resource[j];
-		
-		if (j >= MACIO_DEV_COUNT_RESOURCES)
-			break;
-		res->start = np->addrs[i].address;
-		res->end = np->addrs[i].address + np->addrs[i].size - 1;
-		res->flags = IORESOURCE_MEM;
-		res->name = dev->ofdev.dev.bus_id;
-		if (macio_resource_quirks(np, res, i))
-			memset(res, 0, sizeof(struct resource));
-		else {
-			j++;
-			/* Currently, we consider failure as harmless, this may
-			 * change in the future, once I've found all the device
-			 * tree bugs in older machines & worked around them
-			 */
-			if (insert_resource(parent_res, res))
-       				printk(KERN_WARNING "Can't request resource %d for MacIO"
-				       " device %s\n", i, dev->ofdev.dev.bus_id);
-		}
-	}
-	dev->n_resources = j;
+	/* Setup interrupts & resources */
+	macio_setup_interrupts(dev);
+	macio_setup_resources(dev, parent_res);
 
+	/* Register with core */
 	if (of_device_register(&dev->ofdev) != 0) {
 		printk(KERN_DEBUG"macio: device registration error for %s!\n",
 		       dev->ofdev.dev.bus_id);
@@ -442,36 +477,42 @@ static void macio_pci_add_devices(struct macio_chip *chip)
 
 	/* First scan 1st level */
 	for (np = NULL; (np = of_get_next_child(pnode, np)) != NULL;) {
-		if (!macio_skip_device(np)) {
-			of_node_get(np);
-			mdev = macio_add_one_device(chip, &rdev->ofdev.dev, np, NULL, root_res);
-			if (mdev == NULL)
-				of_node_put(np);
-			else if (strncmp(np->name, "media-bay", 9) == 0)
-				mbdev = mdev;
-			else if (strncmp(np->name, "escc", 4) == 0)
-				sdev = mdev;
-		}
+		if (macio_skip_device(np))
+			continue;
+		of_node_get(np);
+		mdev = macio_add_one_device(chip, &rdev->ofdev.dev, np, NULL,
+					    root_res);
+		if (mdev == NULL)
+			of_node_put(np);
+		else if (strncmp(np->name, "media-bay", 9) == 0)
+			mbdev = mdev;
+		else if (strncmp(np->name, "escc", 4) == 0)
+			sdev = mdev;
 	}
 
 	/* Add media bay devices if any */
 	if (mbdev)
-		for (np = NULL; (np = of_get_next_child(mbdev->ofdev.node, np)) != NULL;)
-			if (!macio_skip_device(np)) {
-				of_node_get(np);
-				if (macio_add_one_device(chip, &mbdev->ofdev.dev, np, mbdev,
-							 root_res) == NULL)
-					of_node_put(np);
-			}
+		for (np = NULL; (np = of_get_next_child(mbdev->ofdev.node, np))
+			     != NULL;) {
+			if (macio_skip_device(np))
+				continue;
+			of_node_get(np);
+			if (macio_add_one_device(chip, &mbdev->ofdev.dev, np,
+						 mbdev,  root_res) == NULL)
+				of_node_put(np);
+		}
+
 	/* Add serial ports if any */
 	if (sdev) {
-		for (np = NULL; (np = of_get_next_child(sdev->ofdev.node, np)) != NULL;)
-			if (!macio_skip_device(np)) {
-				of_node_get(np);
-				if (macio_add_one_device(chip, &sdev->ofdev.dev, np, NULL,
-							 root_res) == NULL)
-					of_node_put(np);
-			}
+		for (np = NULL; (np = of_get_next_child(sdev->ofdev.node, np))
+			     != NULL;) {
+			if (macio_skip_device(np))
+				continue;
+			of_node_get(np);
+			if (macio_add_one_device(chip, &sdev->ofdev.dev, np,
+						 NULL, root_res) == NULL)
+				of_node_put(np);
+		}
 	}
 }
 
@@ -519,7 +560,8 @@ void macio_unregister_driver(struct macio_driver *drv)
  *	Returns 0 on success, or %EBUSY on error.  A warning
  *	message is also printed on failure.
  */
-int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name)
+int macio_request_resource(struct macio_dev *dev, int resource_no,
+			   const char *name)
 {
 	if (macio_resource_len(dev, resource_no) == 0)
 		return 0;
@@ -606,20 +648,20 @@ static int __devinit macio_pci_probe(struct pci_dev *pdev, const struct pci_devi
 	if (ent->vendor != PCI_VENDOR_ID_APPLE)
 		return -ENODEV;
 
-	/* Note regarding refcounting: We assume pci_device_to_OF_node() is ported
-	 * to new OF APIs and returns a node with refcount incremented. This isn't
-	 * the case today, but on the other hand ppc32 doesn't do refcounting. This
-	 * will have to be fixed when going to ppc64. --BenH.
+	/* Note regarding refcounting: We assume pci_device_to_OF_node() is
+	 * ported to new OF APIs and returns a node with refcount incremented.
 	 */
 	np = pci_device_to_OF_node(pdev);
 	if (np == NULL)
 		return -ENODEV;
 
-	/* This assumption is wrong, fix that here for now until I fix the arch */
+	/* The above assumption is wrong !!!
+	 * fix that here for now until I fix the arch code
+	 */
 	of_node_get(np);
 
-	/* We also assume that pmac_feature will have done a get() on nodes stored
-	 * in the macio chips array
+	/* We also assume that pmac_feature will have done a get() on nodes
+	 * stored in the macio chips array
 	 */
 	chip = macio_find(np, macio_unknown);
        	of_node_put(np);
@@ -639,9 +681,9 @@ static int __devinit macio_pci_probe(struct pci_dev *pdev, const struct pci_devi
 
 	/*
 	 * HACK ALERT: The WallStreet PowerBook and some OHare based machines
-	 * have 2 macio ASICs. I must probe the "main" one first or IDE ordering
-	 * will be incorrect. So I put on "hold" the second one since it seem to
-	 * appear first on PCI
+	 * have 2 macio ASICs. I must probe the "main" one first or IDE
+	 * ordering will be incorrect. So I put on "hold" the second one since
+	 * it seem to appear first on PCI
 	 */
 	if (chip->type == macio_gatwick || chip->type == macio_ohareII)
 		if (macio_chips[0].lbus.pdev == NULL) {
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index b856bb67169..8dbf2852bae 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -647,6 +647,7 @@ static int __devinit media_bay_attach(struct macio_dev *mdev, const struct of_de
 	struct media_bay_info* bay;
 	u32 __iomem *regbase;
 	struct device_node *ofnode;
+	unsigned long base;
 	int i;
 
 	ofnode = mdev->ofdev.node;
@@ -656,10 +657,11 @@ static int __devinit media_bay_attach(struct macio_dev *mdev, const struct of_de
 	if (macio_request_resources(mdev, "media-bay"))
 		return -EBUSY;
 	/* Media bay registers are located at the beginning of the
-         * mac-io chip, we get the parent address for now (hrm...)
+         * mac-io chip, for now, we trick and align down the first
+	 * resource passed in
          */
-	regbase = (u32 __iomem *)
-		ioremap(ofnode->parent->addrs[0].address, 0x100);
+	base = macio_resource_start(mdev, 0) & 0xffff0000u;
+	regbase = (u32 __iomem *)ioremap(base, 0x100);
 	if (regbase == NULL) {
 		macio_release_resources(mdev);
 		return -ENOMEM;
diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index e8378274d71..db2ae71d07e 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -53,7 +53,7 @@
 #undef DEBUG_SMU
 
 #ifdef DEBUG_SMU
-#define DPRINTK(fmt, args...) do { udbg_printf(KERN_DEBUG fmt , ##args); } while (0)
+#define DPRINTK(fmt, args...) do { printk(KERN_DEBUG fmt , ##args); } while (0)
 #else
 #define DPRINTK(fmt, args...) do { } while (0)
 #endif
@@ -94,6 +94,8 @@ struct smu_device {
 static struct smu_device	*smu;
 static DECLARE_MUTEX(smu_part_access);
 
+static void smu_i2c_retry(unsigned long data);
+
 /*
  * SMU driver low level stuff
  */
@@ -469,7 +471,6 @@ int __init smu_init (void)
 	smu->of_node = np;
 	smu->db_irq = NO_IRQ;
 	smu->msg_irq = NO_IRQ;
-	init_timer(&smu->i2c_timer);
 
 	/* smu_cmdbuf_abs is in the low 2G of RAM, can be converted to a
 	 * 32 bits value safely
@@ -544,6 +545,10 @@ static int smu_late_init(void)
 	if (!smu)
 		return 0;
 
+	init_timer(&smu->i2c_timer);
+	smu->i2c_timer.function = smu_i2c_retry;
+	smu->i2c_timer.data = (unsigned long)smu;
+
 	/*
 	 * Try to request the interrupts
 	 */
@@ -570,7 +575,10 @@ static int smu_late_init(void)
 
 	return 0;
 }
-arch_initcall(smu_late_init);
+/* This has to be before arch_initcall as the low i2c stuff relies on the
+ * above having been done before we reach arch_initcalls
+ */
+core_initcall(smu_late_init);
 
 /*
  * sysfs visibility
@@ -580,20 +588,10 @@ static void smu_expose_childs(void *unused)
 {
 	struct device_node *np;
 
-	for (np = NULL; (np = of_get_next_child(smu->of_node, np)) != NULL;) {
-		if (device_is_compatible(np, "smu-i2c")) {
-			char name[32];
-			u32 *reg = (u32 *)get_property(np, "reg", NULL);
-
-			if (reg == NULL)
-				continue;
-			sprintf(name, "smu-i2c-%02x", *reg);
-			of_platform_device_create(np, name, &smu->of_dev->dev);
-		}
+	for (np = NULL; (np = of_get_next_child(smu->of_node, np)) != NULL;)
 		if (device_is_compatible(np, "smu-sensors"))
-			of_platform_device_create(np, "smu-sensors", &smu->of_dev->dev);
-	}
-
+			of_platform_device_create(np, "smu-sensors",
+						  &smu->of_dev->dev);
 }
 
 static DECLARE_WORK(smu_expose_childs_work, smu_expose_childs, NULL);
@@ -712,13 +710,13 @@ static void smu_i2c_complete_command(struct smu_i2c_cmd *cmd, int fail)
 
 static void smu_i2c_retry(unsigned long data)
 {
-	struct smu_i2c_cmd	*cmd = (struct smu_i2c_cmd *)data;
+	struct smu_i2c_cmd	*cmd = smu->cmd_i2c_cur;
 
 	DPRINTK("SMU: i2c failure, requeuing...\n");
 
 	/* requeue command simply by resetting reply_len */
 	cmd->pdata[0] = 0xff;
-	cmd->scmd.reply_len = 0x10;
+	cmd->scmd.reply_len = sizeof(cmd->pdata);
 	smu_queue_cmd(&cmd->scmd);
 }
 
@@ -747,10 +745,8 @@ static void smu_i2c_low_completion(struct smu_cmd *scmd, void *misc)
 	 */
 	if (fail && --cmd->retries > 0) {
 		DPRINTK("SMU: i2c failure, starting timer...\n");
-		smu->i2c_timer.function = smu_i2c_retry;
-		smu->i2c_timer.data = (unsigned long)cmd;
-		smu->i2c_timer.expires = jiffies + msecs_to_jiffies(5);
-		add_timer(&smu->i2c_timer);
+		BUG_ON(cmd != smu->cmd_i2c_cur);
+		mod_timer(&smu->i2c_timer, jiffies + msecs_to_jiffies(5));
 		return;
 	}
 
@@ -764,7 +760,7 @@ static void smu_i2c_low_completion(struct smu_cmd *scmd, void *misc)
 
 	/* Ok, initial command complete, now poll status */
 	scmd->reply_buf = cmd->pdata;
-	scmd->reply_len = 0x10;
+	scmd->reply_len = sizeof(cmd->pdata);
 	scmd->data_buf = cmd->pdata;
 	scmd->data_len = 1;
 	cmd->pdata[0] = 0;
@@ -786,7 +782,7 @@ int smu_queue_i2c(struct smu_i2c_cmd *cmd)
 	cmd->scmd.done = smu_i2c_low_completion;
 	cmd->scmd.misc = cmd;
 	cmd->scmd.reply_buf = cmd->pdata;
-	cmd->scmd.reply_len = 0x10;
+	cmd->scmd.reply_len = sizeof(cmd->pdata);
 	cmd->scmd.data_buf = (u8 *)(char *)&cmd->info;
 	cmd->scmd.status = 1;
 	cmd->stage = 0;
@@ -909,10 +905,13 @@ static struct smu_sdbp_header *smu_create_sdb_partition(int id)
 	struct property *prop;
 
 	/* First query the partition info */
+	DPRINTK("SMU: Query partition infos ... (irq=%d)\n", smu->db_irq);
 	smu_queue_simple(&cmd, SMU_CMD_PARTITION_COMMAND, 2,
 			 smu_done_complete, &comp,
 			 SMU_CMD_PARTITION_LATEST, id);
 	wait_for_completion(&comp);
+	DPRINTK("SMU: done, status: %d, reply_len: %d\n",
+		cmd.cmd.status, cmd.cmd.reply_len);
 
 	/* Partition doesn't exist (or other error) */
 	if (cmd.cmd.status != 0 || cmd.cmd.reply_len != 6)
@@ -975,6 +974,8 @@ struct smu_sdbp_header *__smu_get_sdb_partition(int id, unsigned int *size,
 
 	sprintf(pname, "sdb-partition-%02x", id);
 
+	DPRINTK("smu_get_sdb_partition(%02x)\n", id);
+
 	if (interruptible) {
 		int rc;
 		rc = down_interruptible(&smu_part_access);
@@ -986,6 +987,7 @@ struct smu_sdbp_header *__smu_get_sdb_partition(int id, unsigned int *size,
 	part = (struct smu_sdbp_header *)get_property(smu->of_node,
 						      pname, size);
 	if (part == NULL) {
+		DPRINTK("trying to extract from SMU ...\n");
 		part = smu_create_sdb_partition(id);
 		if (part != NULL && size)
 			*size = part->len << 2;
diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c
index d843a6c9c6d..2d9d7915040 100644
--- a/drivers/macintosh/via-cuda.c
+++ b/drivers/macintosh/via-cuda.c
@@ -127,39 +127,34 @@ struct adb_driver via_cuda_driver = {
 #endif /* CONFIG_ADB */
 
 #ifdef CONFIG_PPC
-int __init
-find_via_cuda(void)
+int __init find_via_cuda(void)
 {
-    int err;
     struct adb_request req;
+    phys_addr_t taddr;
+    u32 *reg;
+    int err;
 
     if (vias != 0)
 	return 1;
-    vias = find_devices("via-cuda");
+    vias = of_find_node_by_name(NULL, "via-cuda");
     if (vias == 0)
 	return 0;
-    if (vias->next != 0)
-	printk(KERN_WARNING "Warning: only using 1st via-cuda\n");
-
-#if 0
-    { int i;
-
-    printk("find_via_cuda: node = %p, addrs =", vias->node);
-    for (i = 0; i < vias->n_addrs; ++i)
-	printk(" %x(%x)", vias->addrs[i].address, vias->addrs[i].size);
-    printk(", intrs =");
-    for (i = 0; i < vias->n_intrs; ++i)
-	printk(" %x", vias->intrs[i].line);
-    printk("\n"); }
-#endif
 
-    if (vias->n_addrs != 1 || vias->n_intrs != 1) {
-	printk(KERN_ERR "via-cuda: expecting 1 address (%d) and 1 interrupt (%d)\n",
-	       vias->n_addrs, vias->n_intrs);
-	if (vias->n_addrs < 1 || vias->n_intrs < 1)
-	    return 0;
+    reg = (u32 *)get_property(vias, "reg", NULL);
+    if (reg == NULL) {
+	    printk(KERN_ERR "via-cuda: No \"reg\" property !\n");
+	    goto fail;
+    }
+    taddr = of_translate_address(vias, reg);
+    if (taddr == 0) {
+	    printk(KERN_ERR "via-cuda: Can't translate address !\n");
+	    goto fail;
+    }
+    via = ioremap(taddr, 0x2000);
+    if (via == NULL) {
+	    printk(KERN_ERR "via-cuda: Can't map address !\n");
+	    goto fail;
     }
-    via = ioremap(vias->addrs->address, 0x2000);
 
     cuda_state = idle;
     sys_ctrler = SYS_CTRLER_CUDA;
@@ -185,6 +180,11 @@ find_via_cuda(void)
 	cuda_poll();
 
     return 1;
+
+ fail:
+    of_node_put(vias);
+    vias = NULL;
+    return 0;
 }
 #endif /* CONFIG_PPC */
 
@@ -193,10 +193,6 @@ static int __init via_cuda_start(void)
     if (via == NULL)
 	return -ENODEV;
 
-#ifdef CONFIG_PPC
-    request_OF_resource(vias, 0, NULL);
-#endif
-
     if (request_irq(CUDA_IRQ, cuda_interrupt, 0, "ADB", cuda_interrupt)) {
 	printk(KERN_ERR "cuda_init: can't get irq %d\n", CUDA_IRQ);
 	return -EAGAIN;
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 56404350856..6eb93e45fcd 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -55,6 +55,8 @@
 #include <asm/sections.h>
 #include <asm/irq.h>
 #include <asm/pmac_feature.h>
+#include <asm/pmac_pfunc.h>
+#include <asm/pmac_low_i2c.h>
 #include <asm/uaccess.h>
 #include <asm/mmu_context.h>
 #include <asm/cputable.h>
@@ -147,6 +149,7 @@ static struct device_node *vias;
 static int pmu_kind = PMU_UNKNOWN;
 static int pmu_fully_inited = 0;
 static int pmu_has_adb;
+static struct device_node *gpio_node;
 static unsigned char __iomem *gpio_reg = NULL;
 static int gpio_irq = -1;
 static int gpio_irq_enabled = -1;
@@ -157,8 +160,8 @@ static int pmu_version;
 static int drop_interrupts;
 #if defined(CONFIG_PM) && defined(CONFIG_PPC32)
 static int option_lid_wakeup = 1;
-static int sleep_in_progress;
 #endif /* CONFIG_PM && CONFIG_PPC32 */
+static int sleep_in_progress;
 static unsigned long async_req_locks;
 static unsigned int pmu_irq_stats[11];
 
@@ -196,7 +199,6 @@ static int pmu_adb_reset_bus(void);
 #endif /* CONFIG_ADB */
 
 static int init_pmu(void);
-static int pmu_queue_request(struct adb_request *req);
 static void pmu_start(void);
 static irqreturn_t via_pmu_interrupt(int irq, void *arg, struct pt_regs *regs);
 static irqreturn_t gpio1_interrupt(int irq, void *arg, struct pt_regs *regs);
@@ -295,22 +297,26 @@ static struct backlight_controller pmu_backlight_controller = {
 };
 #endif /* CONFIG_PMAC_BACKLIGHT */
 
-int
-find_via_pmu(void)
+int __init find_via_pmu(void)
 {
+	u64 taddr;
+	u32 *reg;
+
 	if (via != 0)
 		return 1;
-	vias = find_devices("via-pmu");
-	if (vias == 0)
+	vias = of_find_node_by_name(NULL, "via-pmu");
+	if (vias == NULL)
 		return 0;
-	if (vias->next != 0)
-		printk(KERN_WARNING "Warning: only using 1st via-pmu\n");
 
-	if (vias->n_addrs < 1 || vias->n_intrs < 1) {
-		printk(KERN_ERR "via-pmu: %d addresses, %d interrupts!\n",
-		       vias->n_addrs, vias->n_intrs);
-		if (vias->n_addrs < 1 || vias->n_intrs < 1)
-			return 0;
+	reg = (u32 *)get_property(vias, "reg", NULL);
+	if (reg == NULL) {
+		printk(KERN_ERR "via-pmu: No \"reg\" property !\n");
+		goto fail;
+	}
+	taddr = of_translate_address(vias, reg);
+	if (taddr == OF_BAD_ADDR) {
+		printk(KERN_ERR "via-pmu: Can't translate address !\n");
+		goto fail;
 	}
 
 	spin_lock_init(&pmu_lock);
@@ -331,7 +337,8 @@ find_via_pmu(void)
 		pmu_kind = PMU_HEATHROW_BASED;
 	else if (device_is_compatible(vias->parent, "Keylargo")
 		 || device_is_compatible(vias->parent, "K2-Keylargo")) {
-		struct device_node *gpio, *gpiop;
+		struct device_node *gpiop;
+		u64 gaddr = OF_BAD_ADDR;
 
 		pmu_kind = PMU_KEYLARGO_BASED;
 		pmu_has_adb = (find_type_devices("adb") != NULL);
@@ -341,19 +348,24 @@ find_via_pmu(void)
 				PMU_INT_TICK |
 				PMU_INT_ENVIRONMENT;
 		
-		gpiop = find_devices("gpio");
-		if (gpiop && gpiop->n_addrs) {
-			gpio_reg = ioremap(gpiop->addrs->address, 0x10);
-			gpio = find_devices("extint-gpio1");
-			if (gpio == NULL)
-				gpio = find_devices("pmu-interrupt");
-			if (gpio && gpio->parent == gpiop && gpio->n_intrs)
-				gpio_irq = gpio->intrs[0].line;
+		gpiop = of_find_node_by_name(NULL, "gpio");
+		if (gpiop) {
+			reg = (u32 *)get_property(gpiop, "reg", NULL);
+			if (reg)
+				gaddr = of_translate_address(gpiop, reg);
+			if (gaddr != OF_BAD_ADDR)
+				gpio_reg = ioremap(gaddr, 0x10);
 		}
+		if (gpio_reg == NULL)
+			printk(KERN_ERR "via-pmu: Can't find GPIO reg !\n");
 	} else
 		pmu_kind = PMU_UNKNOWN;
 
-	via = ioremap(vias->addrs->address, 0x2000);
+	via = ioremap(taddr, 0x2000);
+	if (via == NULL) {
+		printk(KERN_ERR "via-pmu: Can't map address !\n");
+		goto fail;
+	}
 	
 	out_8(&via[IER], IER_CLR | 0x7f);	/* disable all intrs */
 	out_8(&via[IFR], 0x7f);			/* clear IFR */
@@ -365,23 +377,25 @@ find_via_pmu(void)
 		return 0;
 	}
 
-	printk(KERN_INFO "PMU driver %d initialized for %s, firmware: %02x\n",
+	printk(KERN_INFO "PMU driver v%d initialized for %s, firmware: %02x\n",
 	       PMU_DRIVER_VERSION, pbook_type[pmu_kind], pmu_version);
 	       
 	sys_ctrler = SYS_CTRLER_PMU;
 	
 	return 1;
+ fail:
+	of_node_put(vias);
+	vias = NULL;
+	return 0;
 }
 
 #ifdef CONFIG_ADB
-static int
-pmu_probe(void)
+static int pmu_probe(void)
 {
 	return vias == NULL? -ENODEV: 0;
 }
 
-static int __init
-pmu_init(void)
+static int __init pmu_init(void)
 {
 	if (vias == NULL)
 		return -ENODEV;
@@ -405,7 +419,7 @@ static int __init via_pmu_start(void)
 	bright_req_2.complete = 1;
 	batt_req.complete = 1;
 
-#if defined(CONFIG_PPC32) && !defined(CONFIG_PPC_MERGE)
+#ifndef CONFIG_PPC_MERGE
 	if (pmu_kind == PMU_KEYLARGO_BASED)
 		openpic_set_irq_priority(vias->intrs[0].line,
 					 OPENPIC_PRIORITY_DEFAULT + 1);
@@ -418,10 +432,22 @@ static int __init via_pmu_start(void)
 		return -EAGAIN;
 	}
 
-	if (pmu_kind == PMU_KEYLARGO_BASED && gpio_irq != -1) {
-		if (request_irq(gpio_irq, gpio1_interrupt, 0, "GPIO1 ADB", (void *)0))
-			printk(KERN_ERR "pmu: can't get irq %d (GPIO1)\n", gpio_irq);
-		gpio_irq_enabled = 1;
+	if (pmu_kind == PMU_KEYLARGO_BASED) {
+		gpio_node = of_find_node_by_name(NULL, "extint-gpio1");
+		if (gpio_node == NULL)
+			gpio_node = of_find_node_by_name(NULL,
+							 "pmu-interrupt");
+		if (gpio_node && gpio_node->n_intrs > 0)
+			gpio_irq = gpio_node->intrs[0].line;
+
+		if (gpio_irq != -1) {
+			if (request_irq(gpio_irq, gpio1_interrupt, 0,
+					"GPIO1 ADB", (void *)0))
+				printk(KERN_ERR "pmu: can't get irq %d"
+				       " (GPIO1)\n", gpio_irq);
+			else
+				gpio_irq_enabled = 1;
+		}
 	}
 
 	/* Enable interrupts */
@@ -454,9 +480,6 @@ static int __init via_pmu_dev_init(void)
 	if (vias == NULL)
 		return -ENODEV;
 
-#ifndef CONFIG_PPC64
-	request_OF_resource(vias, 0, NULL);
-#endif
 #ifdef CONFIG_PMAC_BACKLIGHT
 	/* Enable backlight */
 	register_backlight_controller(&pmu_backlight_controller, NULL, "pmu");
@@ -1371,7 +1394,6 @@ next:
 			}
 			pmu_done(req);
 		} else {
-#if defined(CONFIG_XMON) && !defined(CONFIG_PPC64)
 			if (len == 4 && data[1] == 0x2c) {
 				extern int xmon_wants_key, xmon_adb_keycode;
 				if (xmon_wants_key) {
@@ -1379,7 +1401,6 @@ next:
 					return;
 				}
 			}
-#endif /* defined(CONFIG_XMON) && !defined(CONFIG_PPC64) */
 #ifdef CONFIG_ADB
 			/*
 			 * XXX On the [23]400 the PMU gives us an up
@@ -1782,258 +1803,6 @@ pmu_present(void)
 	return via != 0;
 }
 
-struct pmu_i2c_hdr {
-	u8	bus;
-	u8	mode;
-	u8	bus2;
-	u8	address;
-	u8	sub_addr;
-	u8	comb_addr;
-	u8	count;
-};
-
-int
-pmu_i2c_combined_read(int bus, int addr, int subaddr,  u8* data, int len)
-{
-	struct adb_request	req;
-	struct pmu_i2c_hdr	*hdr = (struct pmu_i2c_hdr *)&req.data[1];
-	int retry;
-	int rc;
-
-	for (retry=0; retry<16; retry++) {
-		memset(&req, 0, sizeof(req));
-
-		hdr->bus = bus;
-		hdr->address = addr & 0xfe;
-		hdr->mode = PMU_I2C_MODE_COMBINED;
-		hdr->bus2 = 0;
-		hdr->sub_addr = subaddr;
-		hdr->comb_addr = addr | 1;
-		hdr->count = len;
-		
-		req.nbytes = sizeof(struct pmu_i2c_hdr) + 1;
-		req.reply_expected = 0;
-		req.reply_len = 0;
-		req.data[0] = PMU_I2C_CMD;
-		req.reply[0] = 0xff;
-		rc = pmu_queue_request(&req);
-		if (rc)
-			return rc;
-		while(!req.complete)
-			pmu_poll();
-		if (req.reply[0] == PMU_I2C_STATUS_OK)
-			break;
-		mdelay(15);
-	}
-	if (req.reply[0] != PMU_I2C_STATUS_OK)
-		return -1;
-
-	for (retry=0; retry<16; retry++) {
-		memset(&req, 0, sizeof(req));
-
-		mdelay(15);
-
-		hdr->bus = PMU_I2C_BUS_STATUS;
-		req.reply[0] = 0xff;
-		
-		req.nbytes = 2;
-		req.reply_expected = 0;
-		req.reply_len = 0;
-		req.data[0] = PMU_I2C_CMD;
-		rc = pmu_queue_request(&req);
-		if (rc)
-			return rc;
-		while(!req.complete)
-			pmu_poll();
-		if (req.reply[0] == PMU_I2C_STATUS_DATAREAD) {
-			memcpy(data, &req.reply[1], req.reply_len - 1);
-			return req.reply_len - 1;
-		}
-	}
-	return -1;
-}
-
-int
-pmu_i2c_stdsub_write(int bus, int addr, int subaddr,  u8* data, int len)
-{
-	struct adb_request	req;
-	struct pmu_i2c_hdr	*hdr = (struct pmu_i2c_hdr *)&req.data[1];
-	int retry;
-	int rc;
-
-	for (retry=0; retry<16; retry++) {
-		memset(&req, 0, sizeof(req));
-
-		hdr->bus = bus;
-		hdr->address = addr & 0xfe;
-		hdr->mode = PMU_I2C_MODE_STDSUB;
-		hdr->bus2 = 0;
-		hdr->sub_addr = subaddr;
-		hdr->comb_addr = addr & 0xfe;
-		hdr->count = len;
-
-		req.data[0] = PMU_I2C_CMD;
-		memcpy(&req.data[sizeof(struct pmu_i2c_hdr) + 1], data, len);
-		req.nbytes = sizeof(struct pmu_i2c_hdr) + len + 1;
-		req.reply_expected = 0;
-		req.reply_len = 0;
-		req.reply[0] = 0xff;
-		rc = pmu_queue_request(&req);
-		if (rc)
-			return rc;
-		while(!req.complete)
-			pmu_poll();
-		if (req.reply[0] == PMU_I2C_STATUS_OK)
-			break;
-		mdelay(15);
-	}
-	if (req.reply[0] != PMU_I2C_STATUS_OK)
-		return -1;
-
-	for (retry=0; retry<16; retry++) {
-		memset(&req, 0, sizeof(req));
-
-		mdelay(15);
-
-		hdr->bus = PMU_I2C_BUS_STATUS;
-		req.reply[0] = 0xff;
-		
-		req.nbytes = 2;
-		req.reply_expected = 0;
-		req.reply_len = 0;
-		req.data[0] = PMU_I2C_CMD;
-		rc = pmu_queue_request(&req);
-		if (rc)
-			return rc;
-		while(!req.complete)
-			pmu_poll();
-		if (req.reply[0] == PMU_I2C_STATUS_OK)
-			return len;
-	}
-	return -1;
-}
-
-int
-pmu_i2c_simple_read(int bus, int addr,  u8* data, int len)
-{
-	struct adb_request	req;
-	struct pmu_i2c_hdr	*hdr = (struct pmu_i2c_hdr *)&req.data[1];
-	int retry;
-	int rc;
-
-	for (retry=0; retry<16; retry++) {
-		memset(&req, 0, sizeof(req));
-
-		hdr->bus = bus;
-		hdr->address = addr | 1;
-		hdr->mode = PMU_I2C_MODE_SIMPLE;
-		hdr->bus2 = 0;
-		hdr->sub_addr = 0;
-		hdr->comb_addr = 0;
-		hdr->count = len;
-
-		req.data[0] = PMU_I2C_CMD;
-		req.nbytes = sizeof(struct pmu_i2c_hdr) + 1;
-		req.reply_expected = 0;
-		req.reply_len = 0;
-		req.reply[0] = 0xff;
-		rc = pmu_queue_request(&req);
-		if (rc)
-			return rc;
-		while(!req.complete)
-			pmu_poll();
-		if (req.reply[0] == PMU_I2C_STATUS_OK)
-			break;
-		mdelay(15);
-	}
-	if (req.reply[0] != PMU_I2C_STATUS_OK)
-		return -1;
-
-	for (retry=0; retry<16; retry++) {
-		memset(&req, 0, sizeof(req));
-
-		mdelay(15);
-
-		hdr->bus = PMU_I2C_BUS_STATUS;
-		req.reply[0] = 0xff;
-		
-		req.nbytes = 2;
-		req.reply_expected = 0;
-		req.reply_len = 0;
-		req.data[0] = PMU_I2C_CMD;
-		rc = pmu_queue_request(&req);
-		if (rc)
-			return rc;
-		while(!req.complete)
-			pmu_poll();
-		if (req.reply[0] == PMU_I2C_STATUS_DATAREAD) {
-			memcpy(data, &req.reply[1], req.reply_len - 1);
-			return req.reply_len - 1;
-		}
-	}
-	return -1;
-}
-
-int
-pmu_i2c_simple_write(int bus, int addr,  u8* data, int len)
-{
-	struct adb_request	req;
-	struct pmu_i2c_hdr	*hdr = (struct pmu_i2c_hdr *)&req.data[1];
-	int retry;
-	int rc;
-
-	for (retry=0; retry<16; retry++) {
-		memset(&req, 0, sizeof(req));
-
-		hdr->bus = bus;
-		hdr->address = addr & 0xfe;
-		hdr->mode = PMU_I2C_MODE_SIMPLE;
-		hdr->bus2 = 0;
-		hdr->sub_addr = 0;
-		hdr->comb_addr = 0;
-		hdr->count = len;
-
-		req.data[0] = PMU_I2C_CMD;
-		memcpy(&req.data[sizeof(struct pmu_i2c_hdr) + 1], data, len);
-		req.nbytes = sizeof(struct pmu_i2c_hdr) + len + 1;
-		req.reply_expected = 0;
-		req.reply_len = 0;
-		req.reply[0] = 0xff;
-		rc = pmu_queue_request(&req);
-		if (rc)
-			return rc;
-		while(!req.complete)
-			pmu_poll();
-		if (req.reply[0] == PMU_I2C_STATUS_OK)
-			break;
-		mdelay(15);
-	}
-	if (req.reply[0] != PMU_I2C_STATUS_OK)
-		return -1;
-
-	for (retry=0; retry<16; retry++) {
-		memset(&req, 0, sizeof(req));
-
-		mdelay(15);
-
-		hdr->bus = PMU_I2C_BUS_STATUS;
-		req.reply[0] = 0xff;
-		
-		req.nbytes = 2;
-		req.reply_expected = 0;
-		req.reply_len = 0;
-		req.data[0] = PMU_I2C_CMD;
-		rc = pmu_queue_request(&req);
-		if (rc)
-			return rc;
-		while(!req.complete)
-			pmu_poll();
-		if (req.reply[0] == PMU_I2C_STATUS_OK)
-			return len;
-	}
-	return -1;
-}
-
 #ifdef CONFIG_PM
 
 static LIST_HEAD(sleep_notifiers);
@@ -2338,8 +2107,9 @@ pmac_suspend_devices(void)
 		return -EBUSY;
 	}
 
-	/* Disable clock spreading on some machines */
-	pmac_tweak_clock_spreading(0);
+	/* Call platform functions marked "on sleep" */
+	pmac_pfunc_i2c_suspend();
+	pmac_pfunc_base_suspend();
 
 	/* Stop preemption */
 	preempt_disable();
@@ -2411,8 +2181,9 @@ pmac_wakeup_devices(void)
 	mdelay(10);
 	preempt_enable();
 
-	/* Re-enable clock spreading on some machines */
-	pmac_tweak_clock_spreading(1);
+	/* Call platform functions marked "on wake" */
+	pmac_pfunc_base_resume();
+	pmac_pfunc_i2c_resume();
 
 	/* Resume devices */
 	device_resume();
@@ -3130,16 +2901,13 @@ static int __init init_pmu_sysfs(void)
 subsys_initcall(init_pmu_sysfs);
 
 EXPORT_SYMBOL(pmu_request);
+EXPORT_SYMBOL(pmu_queue_request);
 EXPORT_SYMBOL(pmu_poll);
 EXPORT_SYMBOL(pmu_poll_adb);
 EXPORT_SYMBOL(pmu_wait_complete);
 EXPORT_SYMBOL(pmu_suspend);
 EXPORT_SYMBOL(pmu_resume);
 EXPORT_SYMBOL(pmu_unlock);
-EXPORT_SYMBOL(pmu_i2c_combined_read);
-EXPORT_SYMBOL(pmu_i2c_stdsub_write);
-EXPORT_SYMBOL(pmu_i2c_simple_read);
-EXPORT_SYMBOL(pmu_i2c_simple_write);
 #if defined(CONFIG_PM) && defined(CONFIG_PPC32)
 EXPORT_SYMBOL(pmu_enable_irled);
 EXPORT_SYMBOL(pmu_battery_count);
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index 57460e46c89..906d3ecae6e 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -21,6 +21,7 @@
 #include <asm/io.h>
 #include <asm/system.h>
 #include <asm/sections.h>
+#include <asm/pmac_low_i2c.h>
 
 #include "windfarm.h"
 
@@ -157,53 +158,21 @@ static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter,
 
 static int wf_lm75_attach(struct i2c_adapter *adapter)
 {
-	u8 bus_id;
-	struct device_node *smu, *bus, *dev;
-
-	/* We currently only deal with LM75's hanging off the SMU
-	 * i2c busses. If we extend that driver to other/older
-	 * machines, we should split this function into SMU-i2c,
-	 * keywest-i2c, PMU-i2c, ...
-	 */
+	struct device_node *busnode, *dev;
+	struct pmac_i2c_bus *bus;
 
 	DBG("wf_lm75: adapter %s detected\n", adapter->name);
 
-	if (strncmp(adapter->name, "smu-i2c-", 8) != 0)
-		return 0;
-	smu = of_find_node_by_type(NULL, "smu");
-	if (smu == NULL)
-		return 0;
-
-	/* Look for the bus in the device-tree */
-	bus_id = (u8)simple_strtoul(adapter->name + 8, NULL, 16);
-
-	DBG("wf_lm75: bus ID is %x\n", bus_id);
-
-	/* Look for sensors subdir */
-	for (bus = NULL;
-	     (bus = of_get_next_child(smu, bus)) != NULL;) {
-		u32 *reg;
-
-		if (strcmp(bus->name, "i2c"))
-			continue;
-		reg = (u32 *)get_property(bus, "reg", NULL);
-		if (reg == NULL)
-			continue;
-		if (bus_id == *reg)
-			break;
-	}
-	of_node_put(smu);
-	if (bus == NULL) {
-		printk(KERN_WARNING "windfarm: SMU i2c bus 0x%x not found"
-		       " in device-tree !\n", bus_id);
-		return 0;
-	}
+	bus = pmac_i2c_adapter_to_bus(adapter);
+	if (bus == NULL)
+		return -ENODEV;
+	busnode = pmac_i2c_get_bus_node(bus);
 
 	DBG("wf_lm75: bus found, looking for device...\n");
 
 	/* Now look for lm75(s) in there */
 	for (dev = NULL;
-	     (dev = of_get_next_child(bus, dev)) != NULL;) {
+	     (dev = of_get_next_child(busnode, dev)) != NULL;) {
 		const char *loc =
 			get_property(dev, "hwsensor-location", NULL);
 		u32 *reg = (u32 *)get_property(dev, "reg", NULL);
@@ -217,9 +186,6 @@ static int wf_lm75_attach(struct i2c_adapter *adapter)
 		else if (device_is_compatible(dev, "ds1775"))
 			wf_lm75_create(adapter, *reg, 1, loc);
 	}
-
-	of_node_put(bus);
-
 	return 0;
 }
 
diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c
index 932dcf0366e..311a4122bd7 100644
--- a/drivers/scsi/mac53c94.c
+++ b/drivers/scsi/mac53c94.c
@@ -432,11 +432,12 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat
 	struct Scsi_Host *host;
 	void *dma_cmd_space;
 	unsigned char *clkprop;
-	int proplen;
+	int proplen, rc = -ENODEV;
 
 	if (macio_resource_count(mdev) != 2 || macio_irq_count(mdev) != 2) {
-		printk(KERN_ERR "mac53c94: expected 2 addrs and intrs (got %d/%d)\n",
-		       node->n_addrs, node->n_intrs);
+		printk(KERN_ERR "mac53c94: expected 2 addrs and intrs"
+		       " (got %d/%d)\n",
+		       macio_resource_count(mdev), macio_irq_count(mdev));
 		return -ENODEV;
 	}
 
@@ -448,6 +449,7 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat
        	host = scsi_host_alloc(&mac53c94_template, sizeof(struct fsc_state));
 	if (host == NULL) {
 		printk(KERN_ERR "mac53c94: couldn't register host");
+		rc = -ENOMEM;
 		goto out_release;
 	}
 
@@ -486,6 +488,7 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat
        	if (dma_cmd_space == 0) {
        		printk(KERN_ERR "mac53c94: couldn't allocate dma "
        		       "command space for %s\n", node->full_name);
+		rc = -ENOMEM;
        		goto out_free;
        	}
 	state->dma_cmds = (struct dbdma_cmd *)DBDMA_ALIGN(dma_cmd_space);
@@ -495,18 +498,21 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat
 
 	mac53c94_init(state);
 
-	if (request_irq(state->intr, do_mac53c94_interrupt, 0, "53C94", state)) {
+	if (request_irq(state->intr, do_mac53c94_interrupt, 0, "53C94",state)) {
 		printk(KERN_ERR "mac53C94: can't get irq %d for %s\n",
 		       state->intr, node->full_name);
 		goto out_free_dma;
 	}
 
-	/* XXX FIXME: handle failure */
-	scsi_add_host(host, &mdev->ofdev.dev);
-	scsi_scan_host(host);
+	rc = scsi_add_host(host, &mdev->ofdev.dev);
+	if (rc != 0)
+		goto out_release_irq;
 
+	scsi_scan_host(host);
 	return 0;
 
+ out_release_irq:
+	free_irq(state->intr, state);
  out_free_dma:
 	kfree(state->dma_cmd_space);
  out_free:
@@ -518,7 +524,7 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat
  out_release:
 	macio_release_resources(mdev);
 
-	return  -ENODEV;
+	return rc;
 }
 
 static int mac53c94_remove(struct macio_dev *mdev)
diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c
index bdccf73cf9f..d6d2125f904 100644
--- a/drivers/scsi/mesh.c
+++ b/drivers/scsi/mesh.c
@@ -1869,7 +1869,8 @@ static int mesh_probe(struct macio_dev *mdev, const struct of_device_id *match)
 
 	if (macio_resource_count(mdev) != 2 || macio_irq_count(mdev) != 2) {
        		printk(KERN_ERR "mesh: expected 2 addrs and 2 intrs"
-	       	       " (got %d,%d)\n", mesh->n_addrs, mesh->n_intrs);
+	       	       " (got %d,%d)\n", macio_resource_count(mdev),
+		       macio_irq_count(mdev));
 		return -ENODEV;
 	}
 
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 987d22b53c2..16af5626c24 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -608,7 +608,7 @@ static int cpm_uart_tx_pump(struct uart_port *port)
 
 		p = cpm2cpu_addr(bdp->cbd_bufaddr);
 
-		*p++ = xmit->buf[xmit->tail];
+		*p++ = port->x_char;
 		bdp->cbd_datlen = 1;
 		bdp->cbd_sc |= BD_SC_READY;
 		/* Get next BD. */
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 5ddd8ab1f10..ea24129eb6b 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -1431,11 +1431,14 @@ static int __init pmz_init_port(struct uart_pmac_port *uap)
 		char	name[1];
 	} *slots;
 	int len;
+	struct resource r_ports, r_rxdma, r_txdma;
 
 	/*
 	 * Request & map chip registers
 	 */
-	uap->port.mapbase = np->addrs[0].address;
+	if (of_address_to_resource(np, 0, &r_ports))
+		return -ENODEV;
+	uap->port.mapbase = r_ports.start;
 	uap->port.membase = ioremap(uap->port.mapbase, 0x1000);
       
 	uap->control_reg = uap->port.membase;
@@ -1445,16 +1448,20 @@ static int __init pmz_init_port(struct uart_pmac_port *uap)
 	 * Request & map DBDMA registers
 	 */
 #ifdef HAS_DBDMA
-	if (np->n_addrs >= 3 && np->n_intrs >= 3)
+	if (of_address_to_resource(np, 1, &r_txdma) == 0 &&
+	    of_address_to_resource(np, 2, &r_rxdma) == 0)
 		uap->flags |= PMACZILOG_FLAG_HAS_DMA;
+#else
+	memset(&r_txdma, 0, sizeof(struct resource));
+	memset(&r_rxdma, 0, sizeof(struct resource));
 #endif	
 	if (ZS_HAS_DMA(uap)) {
-		uap->tx_dma_regs = ioremap(np->addrs[np->n_addrs - 2].address, 0x1000);
+		uap->tx_dma_regs = ioremap(r_txdma.start, 0x100);
 		if (uap->tx_dma_regs == NULL) {	
 			uap->flags &= ~PMACZILOG_FLAG_HAS_DMA;
 			goto no_dma;
 		}
-		uap->rx_dma_regs = ioremap(np->addrs[np->n_addrs - 1].address, 0x1000);
+		uap->rx_dma_regs = ioremap(r_rxdma.start, 0x100);
 		if (uap->rx_dma_regs == NULL) {	
 			iounmap(uap->tx_dma_regs);
 			uap->tx_dma_regs = NULL;
diff --git a/drivers/video/controlfb.c b/drivers/video/controlfb.c
index 403d17377f8..03798e9c882 100644
--- a/drivers/video/controlfb.c
+++ b/drivers/video/controlfb.c
@@ -133,12 +133,6 @@ static int controlfb_mmap(struct fb_info *info, struct file *file,
 static int controlfb_set_par (struct fb_info *info);
 static int controlfb_check_var (struct fb_var_screeninfo *var, struct fb_info *info);
 
-/*
- * inititialization
- */
-int control_init(void);
-void control_setup(char *);
-
 /******************** Prototypes for internal functions **********************/
 
 static void set_control_clock(unsigned char *params);
@@ -550,9 +544,46 @@ static void control_set_hardware(struct fb_info_control *p, struct fb_par_contro
 
 
 /*
- * Called from fbmem.c for probing & initializing
+ * Parse user speficied options (`video=controlfb:')
  */
-int __init control_init(void)
+static void __init control_setup(char *options)
+{
+	char *this_opt;
+
+	if (!options || !*options)
+		return;
+
+	while ((this_opt = strsep(&options, ",")) != NULL) {
+		if (!strncmp(this_opt, "vmode:", 6)) {
+			int vmode = simple_strtoul(this_opt+6, NULL, 0);
+			if (vmode > 0 && vmode <= VMODE_MAX &&
+			    control_mac_modes[vmode - 1].m[1] >= 0)
+				default_vmode = vmode;
+		} else if (!strncmp(this_opt, "cmode:", 6)) {
+			int depth = simple_strtoul(this_opt+6, NULL, 0);
+			switch (depth) {
+			 case CMODE_8:
+			 case CMODE_16:
+			 case CMODE_32:
+			 	default_cmode = depth;
+			 	break;
+			 case 8:
+				default_cmode = CMODE_8;
+				break;
+			 case 15:
+			 case 16:
+				default_cmode = CMODE_16;
+				break;
+			 case 24:
+			 case 32:
+				default_cmode = CMODE_32;
+				break;
+			}
+		}
+	}
+}
+
+static int __init control_init(void)
 {
 	struct device_node *dp;
 	char *option = NULL;
@@ -651,15 +682,16 @@ static void __init find_vram_size(struct fb_info_control *p)
 static int __init control_of_init(struct device_node *dp)
 {
 	struct fb_info_control	*p;
-	unsigned long		addr;
-	int			i;
+	struct resource		fb_res, reg_res;
 
 	if (control_fb) {
 		printk(KERN_ERR "controlfb: only one control is supported\n");
 		return -ENXIO;
 	}
-	if(dp->n_addrs != 2) {
-		printk(KERN_ERR "expecting 2 address for control (got %d)", dp->n_addrs);
+
+	if (of_pci_address_to_resource(dp, 2, &fb_res) ||
+	    of_pci_address_to_resource(dp, 1, &reg_res)) {
+		printk(KERN_ERR "can't get 2 addresses for control\n");
 		return -ENXIO;
 	}
 	p = kmalloc(sizeof(*p), GFP_KERNEL);
@@ -669,18 +701,12 @@ static int __init control_of_init(struct device_node *dp)
 	memset(p, 0, sizeof(*p));
 
 	/* Map in frame buffer and registers */
-	for (i = 0; i < dp->n_addrs; ++i) {
-		addr = dp->addrs[i].address;
-		if (dp->addrs[i].size >= 0x800000) {
-			p->fb_orig_base = addr;
-			p->fb_orig_size = dp->addrs[i].size;
-			/* use the big-endian aperture (??) */
-			p->frame_buffer_phys = addr + 0x800000;
-		} else {
-			p->control_regs_phys = addr;
-			p->control_regs_size = dp->addrs[i].size;
-		}
-	}
+	p->fb_orig_base = fb_res.start;
+	p->fb_orig_size = fb_res.end - fb_res.start + 1;
+	/* use the big-endian aperture (??) */
+	p->frame_buffer_phys = fb_res.start + 0x800000;
+	p->control_regs_phys = reg_res.start;
+	p->control_regs_size = reg_res.end - reg_res.start + 1;
 
 	if (!p->fb_orig_base ||
 	    !request_mem_region(p->fb_orig_base,p->fb_orig_size,"controlfb")) {
@@ -1059,43 +1085,3 @@ static void control_cleanup(void)
 }
 
 
-/*
- * Parse user speficied options (`video=controlfb:')
- */
-void __init control_setup(char *options)
-{
-	char *this_opt;
-
-	if (!options || !*options)
-		return;
-
-	while ((this_opt = strsep(&options, ",")) != NULL) {
-		if (!strncmp(this_opt, "vmode:", 6)) {
-			int vmode = simple_strtoul(this_opt+6, NULL, 0);
-			if (vmode > 0 && vmode <= VMODE_MAX &&
-			    control_mac_modes[vmode - 1].m[1] >= 0)
-				default_vmode = vmode;
-		} else if (!strncmp(this_opt, "cmode:", 6)) {
-			int depth = simple_strtoul(this_opt+6, NULL, 0);
-			switch (depth) {
-			 case CMODE_8:
-			 case CMODE_16:
-			 case CMODE_32:
-			 	default_cmode = depth;
-			 	break;
-			 case 8:
-				default_cmode = CMODE_8;
-				break;
-			 case 15:
-			 case 16:
-				default_cmode = CMODE_16;
-				break;
-			 case 24:
-			 case 32:
-				default_cmode = CMODE_32;
-				break;
-			}
-		}
-	}
-}
-
diff --git a/drivers/video/offb.c b/drivers/video/offb.c
index 00d87f5bb7b..ad1434e3f22 100644
--- a/drivers/video/offb.c
+++ b/drivers/video/offb.c
@@ -223,6 +223,7 @@ static int offb_blank(int blank, struct fb_info *info)
 int __init offb_init(void)
 {
 	struct device_node *dp = NULL, *boot_disp = NULL;
+
 #if defined(CONFIG_BOOTX_TEXT) && defined(CONFIG_PPC32)
 	struct device_node *macos_display = NULL;
 #endif
@@ -234,60 +235,54 @@ int __init offb_init(void)
 	if (boot_infos != 0) {
 		unsigned long addr =
 		    (unsigned long) boot_infos->dispDeviceBase;
+		u32 *addrp;
+		u64 daddr, dsize;
+		unsigned int flags;
+
 		/* find the device node corresponding to the macos display */
 		while ((dp = of_find_node_by_type(dp, "display"))) {
 			int i;
-			/*
-			 * Grrr...  It looks like the MacOS ATI driver
-			 * munges the assigned-addresses property (but
-			 * the AAPL,address value is OK).
-			 */
-			if (strncmp(dp->name, "ATY,", 4) == 0
-			    && dp->n_addrs == 1) {
-				unsigned int *ap =
-				    (unsigned int *) get_property(dp,
-								  "AAPL,address",
-								  NULL);
-				if (ap != NULL) {
-					dp->addrs[0].address = *ap;
-					dp->addrs[0].size = 0x01000000;
-				}
-			}
 
 			/*
-			 * The LTPro on the Lombard powerbook has no addresses
-			 * on the display nodes, they are on their parent.
+			 * Look for an AAPL,address property first.
 			 */
-			if (dp->n_addrs == 0
-			    && device_is_compatible(dp, "ATY,264LTPro")) {
-				int na;
-				unsigned int *ap = (unsigned int *)
-				    get_property(dp, "AAPL,address", &na);
-				if (ap != 0)
-					for (na /= sizeof(unsigned int);
-					     na > 0; --na, ++ap)
-						if (*ap <= addr
-						    && addr <
-						    *ap + 0x1000000)
-							goto foundit;
+			unsigned int na;
+			unsigned int *ap =
+				(unsigned int *)get_property(dp, "AAPL,address",
+							     &na);
+			if (ap != 0) {
+				for (na /= sizeof(unsigned int); na > 0;
+				     --na, ++ap)
+					if (*ap <= addr &&
+					    addr < *ap + 0x1000000) {
+						macos_display = dp;
+						goto foundit;
+					}
 			}
 
 			/*
 			 * See if the display address is in one of the address
 			 * ranges for this display.
 			 */
-			for (i = 0; i < dp->n_addrs; ++i) {
-				if (dp->addrs[i].address <= addr
-				    && addr <
-				    dp->addrs[i].address +
-				    dp->addrs[i].size)
+			i = 0;
+			for (;;) {
+				addrp = of_get_address(dp, i++, &dsize, &flags);
+				if (addrp == NULL)
 					break;
+				if (!(flags & IORESOURCE_MEM))
+					continue;
+				daddr = of_translate_address(dp, addrp);
+				if (daddr == OF_BAD_ADDR)
+					continue;
+				if (daddr <= addr && addr < (daddr + dsize)) {
+					macos_display = dp;
+					goto foundit;
+				}
 			}
-			if (i < dp->n_addrs) {
-			      foundit:
+		foundit:
+			if (macos_display) {
 				printk(KERN_INFO "MacOS display is %s\n",
 				       dp->full_name);
-				macos_display = dp;
 				break;
 			}
 		}
@@ -326,8 +321,10 @@ static void __init offb_init_nodriver(struct device_node *dp)
 	int *pp, i;
 	unsigned int len;
 	int width = 640, height = 480, depth = 8, pitch;
-	unsigned int rsize, *up;
-	unsigned long address = 0;
+	unsigned int flags, rsize, *up;
+	u64 address = OF_BAD_ADDR;
+	u32 *addrp;
+	u64 asize;
 
 	if ((pp = (int *) get_property(dp, "depth", &len)) != NULL
 	    && len == sizeof(int))
@@ -363,7 +360,7 @@ static void __init offb_init_nodriver(struct device_node *dp)
                                break;
 	       }
                if (pdev) {
-                       for (i = 0; i < 6 && address == 0; i++) {
+                       for (i = 0; i < 6 && address == OF_BAD_ADDR; i++) {
                                if ((pci_resource_flags(pdev, i) &
 				    IORESOURCE_MEM) &&
 				   (pci_resource_len(pdev, i) >= rsize))
@@ -374,27 +371,33 @@ static void __init offb_init_nodriver(struct device_node *dp)
         }
 #endif /* CONFIG_PCI */
 
-	if (address == 0 &&
-	    (up = (unsigned *) get_property(dp, "address", &len)) != NULL &&
-	    len == sizeof(unsigned))
-		address = (u_long) * up;
-	if (address == 0) {
-		for (i = 0; i < dp->n_addrs; ++i)
-			if (dp->addrs[i].size >=
-			    pitch * height * depth / 8)
-				break;
-		if (i >= dp->n_addrs) {
+       /* This one is dodgy, we may drop it ... */
+       if (address == OF_BAD_ADDR &&
+	   (up = (unsigned *) get_property(dp, "address", &len)) != NULL &&
+	   len == sizeof(unsigned int))
+	       address = (u64) * up;
+
+       if (address == OF_BAD_ADDR) {
+	       for (i = 0; (addrp = of_get_address(dp, i, &asize, &flags))
+			    != NULL; i++) {
+		       if (!(flags & IORESOURCE_MEM))
+			       continue;
+		       if (asize >= pitch * height * depth / 8)
+			       break;
+	       }
+		if (addrp == NULL) {
 			printk(KERN_ERR
 			       "no framebuffer address found for %s\n",
 			       dp->full_name);
 			return;
 		}
-
-		address = (u_long) dp->addrs[i].address;
-
-#ifdef CONFIG_PPC64
-		address += ((struct pci_dn *)dp->data)->phb->pci_mem_offset;
-#endif
+		address = of_translate_address(dp, addrp);
+		if (address == OF_BAD_ADDR) {
+			printk(KERN_ERR
+			       "can't translate framebuffer address for %s\n",
+			       dp->full_name);
+			return;
+		}
 
 		/* kludge for valkyrie */
 		if (strcmp(dp->name, "valkyrie") == 0)
@@ -459,7 +462,9 @@ static void __init offb_init_fb(const char *name, const char *full_name,
 
 	par->cmap_type = cmap_unknown;
 	if (depth == 8) {
-		/* XXX kludge for ati */
+
+		/* Palette hacks disabled for now */
+#if 0
 		if (dp && !strncmp(name, "ATY,Rage128", 11)) {
 			unsigned long regbase = dp->addrs[2].address;
 			par->cmap_adr = ioremap(regbase, 0x1FFF);
@@ -490,6 +495,7 @@ static void __init offb_init_fb(const char *name, const char *full_name,
 			par->cmap_adr = ioremap(regbase + 0x6000, 0x1000);
 			par->cmap_type = cmap_gxt2000;
 		}
+#endif
 		fix->visual = par->cmap_adr ? FB_VISUAL_PSEUDOCOLOR
 		    : FB_VISUAL_STATIC_PSEUDOCOLOR;
 	} else
diff --git a/drivers/video/platinumfb.c b/drivers/video/platinumfb.c
index ca4082ae5a1..335e3746555 100644
--- a/drivers/video/platinumfb.c
+++ b/drivers/video/platinumfb.c
@@ -69,6 +69,8 @@ struct fb_info_platinum {
 	unsigned long			total_vram;
 	int				clktype;
 	int				dactype;
+
+	struct resource			rsrc_fb, rsrc_reg;
 };
 
 /*
@@ -97,9 +99,6 @@ static int platinum_var_to_par(struct fb_var_screeninfo *var,
  * Interface used by the world
  */
 
-int platinumfb_init(void);
-int platinumfb_setup(char*);
-
 static struct fb_ops platinumfb_ops = {
 	.owner =	THIS_MODULE,
 	.fb_check_var	= platinumfb_check_var,
@@ -138,13 +137,15 @@ static int platinumfb_set_par (struct fb_info *info)
 
 	init = platinum_reg_init[pinfo->vmode-1];
 	
-	if (pinfo->vmode == 13 && pinfo->cmode > 0)
-		offset = 0x10;
+ 	if ((pinfo->vmode == VMODE_832_624_75) && (pinfo->cmode > CMODE_8))
+  		offset = 0x10;
+
 	info->screen_base = pinfo->frame_buffer + init->fb_offset + offset;
 	info->fix.smem_start = (pinfo->frame_buffer_phys) + init->fb_offset + offset;
 	info->fix.visual = (pinfo->cmode == CMODE_8) ?
 		FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
-	info->fix.line_length = vmode_attrs[pinfo->vmode-1].hres * (1<<pinfo->cmode) + offset;
+ 	info->fix.line_length = vmode_attrs[pinfo->vmode-1].hres * (1<<pinfo->cmode)
+		+ offset;
 	printk("line_length: %x\n", info->fix.line_length);
 	return 0;
 }
@@ -221,7 +222,9 @@ static int platinumfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 static inline int platinum_vram_reqd(int video_mode, int color_mode)
 {
 	return vmode_attrs[video_mode-1].vres *
-	       (vmode_attrs[video_mode-1].hres * (1<<color_mode) + 0x20) +0x1000;
+	       (vmode_attrs[video_mode-1].hres * (1<<color_mode) +
+		((video_mode == VMODE_832_624_75) &&
+		 (color_mode > CMODE_8)) ? 0x10 : 0x20) + 0x1000;
 }
 
 #define STORE_D2(a, d) { \
@@ -481,7 +484,7 @@ static int platinum_var_to_par(struct fb_var_screeninfo *var,
 /* 
  * Parse user speficied options (`video=platinumfb:')
  */
-int __init platinumfb_setup(char *options)
+static int __init platinumfb_setup(char *options)
 {
 	char *this_opt;
 
@@ -522,19 +525,15 @@ int __init platinumfb_setup(char *options)
 #define invalidate_cache(addr)
 #endif
 
-static int __devinit platinumfb_probe(struct of_device* odev, const struct of_device_id *match)
+static int __devinit platinumfb_probe(struct of_device* odev,
+				      const struct of_device_id *match)
 {
 	struct device_node	*dp = odev->node;
 	struct fb_info		*info;
 	struct fb_info_platinum	*pinfo;
-	unsigned long		addr, size;
 	volatile __u8		*fbuffer;
-	int			i, bank0, bank1, bank2, bank3, rc;
+	int			bank0, bank1, bank2, bank3, rc;
 
-	if (dp->n_addrs != 2) {
-		printk(KERN_ERR "expecting 2 address for platinum (got %d)", dp->n_addrs);
-		return -ENXIO;
-	}
 	printk(KERN_INFO "platinumfb: Found Apple Platinum video hardware\n");
 
 	info = framebuffer_alloc(sizeof(*pinfo), &odev->dev);
@@ -542,26 +541,39 @@ static int __devinit platinumfb_probe(struct of_device* odev, const struct of_de
 		return -ENOMEM;
 	pinfo = info->par;
 
-	/* Map in frame buffer and registers */
-	for (i = 0; i < dp->n_addrs; ++i) {
-		addr = dp->addrs[i].address;
-		size = dp->addrs[i].size;
-		/* Let's assume we can request either all or nothing */
-		if (!request_mem_region(addr, size, "platinumfb")) {
-			framebuffer_release(info);
-			return -ENXIO;
-		}
-		if (size >= 0x400000) {
-			/* frame buffer - map only 4MB */
-			pinfo->frame_buffer_phys = addr;
-			pinfo->frame_buffer = __ioremap(addr, 0x400000, _PAGE_WRITETHRU);
-			pinfo->base_frame_buffer = pinfo->frame_buffer;
-		} else {
-			/* registers */
-			pinfo->platinum_regs_phys = addr;
-			pinfo->platinum_regs = ioremap(addr, size);
-		}
+	if (of_address_to_resource(dp, 0, &pinfo->rsrc_reg) ||
+	    of_address_to_resource(dp, 1, &pinfo->rsrc_fb)) {
+		printk(KERN_ERR "platinumfb: Can't get resources\n");
+		framebuffer_release(info);
+		return -ENXIO;
 	}
+	if (!request_mem_region(pinfo->rsrc_reg.start,
+				pinfo->rsrc_reg.start -
+				pinfo->rsrc_reg.end + 1,
+				"platinumfb registers")) {
+		framebuffer_release(info);
+		return -ENXIO;
+	}
+	if (!request_mem_region(pinfo->rsrc_fb.start,
+				pinfo->rsrc_fb.start
+				- pinfo->rsrc_fb.end + 1,
+				"platinumfb framebuffer")) {
+		release_mem_region(pinfo->rsrc_reg.start,
+				   pinfo->rsrc_reg.end -
+				   pinfo->rsrc_reg.start + 1);
+		framebuffer_release(info);
+		return -ENXIO;
+	}
+
+	/* frame buffer - map only 4MB */
+	pinfo->frame_buffer_phys = pinfo->rsrc_fb.start;
+	pinfo->frame_buffer = __ioremap(pinfo->rsrc_fb.start, 0x400000,
+					_PAGE_WRITETHRU);
+	pinfo->base_frame_buffer = pinfo->frame_buffer;
+
+	/* registers */
+	pinfo->platinum_regs_phys = pinfo->rsrc_reg.start;
+	pinfo->platinum_regs = ioremap(pinfo->rsrc_reg.start, 0x1000);
 
 	pinfo->cmap_regs_phys = 0xf301b000;	/* XXX not in prom? */
 	request_mem_region(pinfo->cmap_regs_phys, 0x1000, "platinumfb cmap");
@@ -624,18 +636,16 @@ static int __devexit platinumfb_remove(struct of_device* odev)
 {
 	struct fb_info		*info = dev_get_drvdata(&odev->dev);
 	struct fb_info_platinum	*pinfo = info->par;
-	struct device_node *dp = odev->node;
-	unsigned long addr, size;
-	int i;
 	
         unregister_framebuffer (info);
 	
 	/* Unmap frame buffer and registers */
-	for (i = 0; i < dp->n_addrs; ++i) {
-		addr = dp->addrs[i].address;
-		size = dp->addrs[i].size;
-		release_mem_region(addr, size);
-	}
+	release_mem_region(pinfo->rsrc_fb.start,
+			   pinfo->rsrc_fb.end -
+			   pinfo->rsrc_fb.start + 1);
+	release_mem_region(pinfo->rsrc_reg.start,
+			   pinfo->rsrc_reg.end -
+			   pinfo->rsrc_reg.start + 1);
 	iounmap(pinfo->frame_buffer);
 	iounmap(pinfo->platinum_regs);
 	release_mem_region(pinfo->cmap_regs_phys, 0x1000);
@@ -662,7 +672,7 @@ static struct of_platform_driver platinum_driver =
 	.remove		= platinumfb_remove,
 };
 
-int __init platinumfb_init(void)
+static int __init platinumfb_init(void)
 {
 #ifndef MODULE
 	char *option = NULL;
@@ -676,7 +686,7 @@ int __init platinumfb_init(void)
 	return 0;
 }
 
-void __exit platinumfb_exit(void)
+static void __exit platinumfb_exit(void)
 {
 	of_unregister_driver(&platinum_driver);	
 }
diff --git a/drivers/video/platinumfb.h b/drivers/video/platinumfb.h
index 2834fc1c344..f6bd77cafd1 100644
--- a/drivers/video/platinumfb.h
+++ b/drivers/video/platinumfb.h
@@ -158,7 +158,9 @@ static struct platinum_regvals platinum_reg_init_14 = {
 /* 832x624, 75Hz (13) */
 static struct platinum_regvals platinum_reg_init_13 = {
 	0x70,
-	{ 864, 1680, 3360 },	/* MacOS does 1680 instead of 1696 to fit 16bpp in 1MB */
+	{ 864, 1680, 3344 },	/* MacOS does 1680 instead of 1696 to fit 16bpp in 1MB,
+				 * and we use 3344 instead of 3360 to fit in 2Mb
+				 */
 	{ 0xff0, 4, 0, 0, 0, 0, 0x299, 0,
 	  0, 0x21e, 0x120, 0x10, 0x23f, 0x1f, 0x25, 0x37,
 	  0x8a, 0x22a, 0x23e, 0x536, 0x534, 4, 9, 0x52,
diff --git a/drivers/video/valkyriefb.c b/drivers/video/valkyriefb.c
index ce97ec8eae9..2bdeb4baa95 100644
--- a/drivers/video/valkyriefb.c
+++ b/drivers/video/valkyriefb.c
@@ -342,19 +342,19 @@ int __init valkyriefb_init(void)
 #else /* ppc (!CONFIG_MAC) */
 	{
 		struct device_node *dp;
+		struct resource r;
 
-		dp = find_devices("valkyrie");
+		dp = of_find_node_by_name(NULL, "valkyrie");
 		if (dp == 0)
 			return 0;
 
-		if (dp->n_addrs != 1) {
-			printk(KERN_ERR "expecting 1 address for valkyrie (got %d)\n",
-			       dp->n_addrs);
+		if (of_address_to_resource(dp, 0, &r)) {
+			printk(KERN_ERR "can't find address for valkyrie\n");
 			return 0;
 		}
 
-		frame_buffer_phys = dp->addrs[0].address;
-		cmap_regs_phys = dp->addrs[0].address+0x304000;
+		frame_buffer_phys = r.start;
+		cmap_regs_phys = r.start + 0x304000;
 		flags = _PAGE_WRITETHRU;
 	}
 #endif /* ppc (!CONFIG_MAC) */