aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorAlan Cox <alan@redhat.com>2006-02-27 00:09:05 -0300
committerMauro Carvalho Chehab <mchehab@infradead.org>2006-02-27 00:09:05 -0300
commitab33d5071de7a33616842882c11b5eb52a6c26a1 (patch)
tree5484a1a0d671e7191a47a1b51d5e1ae67fc8916f /drivers
parentf05cce863fa399dd79c5aa3896d608b8b86d8030 (diff)
V4L/DVB (3376): Add cpia2 camera support
There has been a CPIA2 driver out of kernel for a long time and it has been pretty clean for some time too. This is an import of the sourceforge driver which has been stripped of - 2.4 back compatibility - 2.4 old style MJPEG ioctls A couple of functions have been made static and the docs have been repackaged into Documentation/video4linux. The rvmalloc/free functions now match the cpia driver again. Other than that this is the code as is. Tested on x86-64 with a QX5 microscope. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/media/video/Kconfig10
-rw-r--r--drivers/media/video/Makefile1
-rw-r--r--drivers/media/video/cpia2/Makefile3
-rw-r--r--drivers/media/video/cpia2/cpia2.h497
-rw-r--r--drivers/media/video/cpia2/cpia2_core.c2525
-rw-r--r--drivers/media/video/cpia2/cpia2_registers.h476
-rw-r--r--drivers/media/video/cpia2/cpia2_usb.c907
-rw-r--r--drivers/media/video/cpia2/cpia2_v4l.c2104
-rw-r--r--drivers/media/video/cpia2/cpia2dev.h50
-rw-r--r--drivers/media/video/cpia2/cpia2patch.h233
10 files changed, 6806 insertions, 0 deletions
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index d82c8a30ba4..f6889f77105 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -142,6 +142,16 @@ config VIDEO_CPIA_USB
otherwise say N. This will not work with the Creative Webcam III.
It is also available as a module (cpia_usb).
+config VIDEO_CPIA2
+ tristate "CPiA2 Video For Linux"
+ depends on VIDEO_DEV
+ ---help---
+ This is the video4linux driver for cameras based on Vision's CPiA2
+ (Colour Processor Interface ASIC), such as the Digital Blue QX5
+ Microscope. If you have one of these cameras, say Y here
+
+ This driver is also available as a module (cpia2).
+
config VIDEO_SAA5246A
tristate "SAA5246A, SAA5281 Teletext processor"
depends on VIDEO_DEV && I2C
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index faf728366c4..87b1ce6e205 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_VIDEO_EM28XX) += em28xx/
obj-$(CONFIG_VIDEO_EM28XX) += saa711x.o tvp5150.o
obj-$(CONFIG_VIDEO_AUDIO_DECODER) += wm8775.o cs53l32a.o
obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip/
+obj-$(CONFIG_VIDEO_CPIA2) += cpia2/
obj-$(CONFIG_VIDEO_MXB) += saa7111.o tuner.o tda9840.o tea6415c.o tea6420.o mxb.o
obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o
obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o
diff --git a/drivers/media/video/cpia2/Makefile b/drivers/media/video/cpia2/Makefile
new file mode 100644
index 00000000000..828cf1b1df8
--- /dev/null
+++ b/drivers/media/video/cpia2/Makefile
@@ -0,0 +1,3 @@
+cpia2-objs := cpia2_v4l.o cpia2_usb.o cpia2_core.o
+
+obj-$(CONFIG_VIDEO_CPIA2) += cpia2.o
diff --git a/drivers/media/video/cpia2/cpia2.h b/drivers/media/video/cpia2/cpia2.h
new file mode 100644
index 00000000000..95d3afa94a3
--- /dev/null
+++ b/drivers/media/video/cpia2/cpia2.h
@@ -0,0 +1,497 @@
+/****************************************************************************
+ *
+ * Filename: cpia2.h
+ *
+ * Copyright 2001, STMicrolectronics, Inc.
+ *
+ * Contact: steve.miller@st.com
+ *
+ * Description:
+ * This is a USB driver for CPiA2 based video cameras.
+ *
+ * This driver is modelled on the cpia usb driver by
+ * Jochen Scharrlach and Johannes Erdfeldt.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ ****************************************************************************/
+
+#ifndef __CPIA2_H__
+#define __CPIA2_H__
+
+#include <linux/version.h>
+#include <linux/videodev.h>
+#include <linux/usb.h>
+#include <linux/poll.h>
+
+#include "cpia2dev.h"
+#include "cpia2_registers.h"
+
+/* define for verbose debug output */
+//#define _CPIA2_DEBUG_
+
+#define CPIA2_MAJ_VER 2
+#define CPIA2_MIN_VER 0
+#define CPIA2_PATCH_VER 0
+
+/***
+ * Image defines
+ ***/
+#ifndef true
+#define true 1
+#define false 0
+#endif
+
+/* Misc constants */
+#define ALLOW_CORRUPT 0 /* Causes collater to discard checksum */
+
+/* USB Transfer mode */
+#define XFER_ISOC 0
+#define XFER_BULK 1
+
+/* USB Alternates */
+#define USBIF_CMDONLY 0
+#define USBIF_BULK 1
+#define USBIF_ISO_1 2 /* 128 bytes/ms */
+#define USBIF_ISO_2 3 /* 384 bytes/ms */
+#define USBIF_ISO_3 4 /* 640 bytes/ms */
+#define USBIF_ISO_4 5 /* 768 bytes/ms */
+#define USBIF_ISO_5 6 /* 896 bytes/ms */
+#define USBIF_ISO_6 7 /* 1023 bytes/ms */
+
+/* Flicker Modes */
+#define NEVER_FLICKER 0
+#define ANTI_FLICKER_ON 1
+#define FLICKER_60 60
+#define FLICKER_50 50
+
+/* Debug flags */
+#define DEBUG_NONE 0
+#define DEBUG_REG 0x00000001
+#define DEBUG_DUMP_PATCH 0x00000002
+#define DEBUG_DUMP_REGS 0x00000004
+
+/***
+ * Video frame sizes
+ ***/
+enum {
+ VIDEOSIZE_VGA = 0, /* 640x480 */
+ VIDEOSIZE_CIF, /* 352x288 */
+ VIDEOSIZE_QVGA, /* 320x240 */
+ VIDEOSIZE_QCIF, /* 176x144 */
+ VIDEOSIZE_288_216,
+ VIDEOSIZE_256_192,
+ VIDEOSIZE_224_168,
+ VIDEOSIZE_192_144,
+};
+
+#define STV_IMAGE_CIF_ROWS 288
+#define STV_IMAGE_CIF_COLS 352
+
+#define STV_IMAGE_QCIF_ROWS 144
+#define STV_IMAGE_QCIF_COLS 176
+
+#define STV_IMAGE_VGA_ROWS 480
+#define STV_IMAGE_VGA_COLS 640
+
+#define STV_IMAGE_QVGA_ROWS 240
+#define STV_IMAGE_QVGA_COLS 320
+
+#define JPEG_MARKER_COM (1<<6) /* Comment segment */
+
+/***
+ * Enums
+ ***/
+/* Sensor types available with cpia2 asics */
+enum sensors {
+ CPIA2_SENSOR_410,
+ CPIA2_SENSOR_500
+};
+
+/* Asic types available in the CPiA2 architecture */
+#define CPIA2_ASIC_672 0x67
+
+/* Device types (stv672, stv676, etc) */
+#define DEVICE_STV_672 0x0001
+#define DEVICE_STV_676 0x0002
+
+enum frame_status {
+ FRAME_EMPTY,
+ FRAME_READING, /* In the process of being grabbed into */
+ FRAME_READY, /* Ready to be read */
+ FRAME_ERROR,
+};
+
+/***
+ * Register access (for USB request byte)
+ ***/
+enum {
+ CAMERAACCESS_SYSTEM = 0,
+ CAMERAACCESS_VC,
+ CAMERAACCESS_VP,
+ CAMERAACCESS_IDATA
+};
+
+#define CAMERAACCESS_TYPE_BLOCK 0x00
+#define CAMERAACCESS_TYPE_RANDOM 0x04
+#define CAMERAACCESS_TYPE_MASK 0x08
+#define CAMERAACCESS_TYPE_REPEAT 0x0C
+
+#define TRANSFER_READ 0
+#define TRANSFER_WRITE 1
+
+#define DEFAULT_ALT USBIF_ISO_6
+#define DEFAULT_BRIGHTNESS 0x46
+#define DEFAULT_CONTRAST 0x93
+#define DEFAULT_SATURATION 0x7f
+#define DEFAULT_TARGET_KB 0x30
+
+/* Power state */
+#define HI_POWER_MODE CPIA2_SYSTEM_CONTROL_HIGH_POWER
+#define LO_POWER_MODE CPIA2_SYSTEM_CONTROL_LOW_POWER
+
+
+/********
+ * Commands
+ *******/
+enum {
+ CPIA2_CMD_NONE = 0,
+ CPIA2_CMD_GET_VERSION,
+ CPIA2_CMD_GET_PNP_ID,
+ CPIA2_CMD_GET_ASIC_TYPE,
+ CPIA2_CMD_GET_SENSOR,
+ CPIA2_CMD_GET_VP_DEVICE,
+ CPIA2_CMD_GET_VP_BRIGHTNESS,
+ CPIA2_CMD_SET_VP_BRIGHTNESS,
+ CPIA2_CMD_GET_CONTRAST,
+ CPIA2_CMD_SET_CONTRAST,
+ CPIA2_CMD_GET_VP_SATURATION,
+ CPIA2_CMD_SET_VP_SATURATION,
+ CPIA2_CMD_GET_VP_GPIO_DIRECTION,
+ CPIA2_CMD_SET_VP_GPIO_DIRECTION,
+ CPIA2_CMD_GET_VP_GPIO_DATA,
+ CPIA2_CMD_SET_VP_GPIO_DATA,
+ CPIA2_CMD_GET_VC_MP_GPIO_DIRECTION,
+ CPIA2_CMD_SET_VC_MP_GPIO_DIRECTION,
+ CPIA2_CMD_GET_VC_MP_GPIO_DATA,
+ CPIA2_CMD_SET_VC_MP_GPIO_DATA,
+ CPIA2_CMD_ENABLE_PACKET_CTRL,
+ CPIA2_CMD_GET_FLICKER_MODES,
+ CPIA2_CMD_SET_FLICKER_MODES,
+ CPIA2_CMD_RESET_FIFO, /* clear fifo and enable stream block */
+ CPIA2_CMD_SET_HI_POWER,
+ CPIA2_CMD_SET_LOW_POWER,
+ CPIA2_CMD_CLEAR_V2W_ERR,
+ CPIA2_CMD_SET_USER_MODE,
+ CPIA2_CMD_GET_USER_MODE,
+ CPIA2_CMD_FRAMERATE_REQ,
+ CPIA2_CMD_SET_COMPRESSION_STATE,
+ CPIA2_CMD_GET_WAKEUP,
+ CPIA2_CMD_SET_WAKEUP,
+ CPIA2_CMD_GET_PW_CONTROL,
+ CPIA2_CMD_SET_PW_CONTROL,
+ CPIA2_CMD_GET_SYSTEM_CTRL,
+ CPIA2_CMD_SET_SYSTEM_CTRL,
+ CPIA2_CMD_GET_VP_SYSTEM_STATE,
+ CPIA2_CMD_GET_VP_SYSTEM_CTRL,
+ CPIA2_CMD_SET_VP_SYSTEM_CTRL,
+ CPIA2_CMD_GET_VP_EXP_MODES,
+ CPIA2_CMD_SET_VP_EXP_MODES,
+ CPIA2_CMD_GET_DEVICE_CONFIG,
+ CPIA2_CMD_SET_DEVICE_CONFIG,
+ CPIA2_CMD_SET_SERIAL_ADDR,
+ CPIA2_CMD_SET_SENSOR_CR1,
+ CPIA2_CMD_GET_VC_CONTROL,
+ CPIA2_CMD_SET_VC_CONTROL,
+ CPIA2_CMD_SET_TARGET_KB,
+ CPIA2_CMD_SET_DEF_JPEG_OPT,
+ CPIA2_CMD_REHASH_VP4,
+ CPIA2_CMD_GET_USER_EFFECTS,
+ CPIA2_CMD_SET_USER_EFFECTS
+};
+
+enum user_cmd {
+ COMMAND_NONE = 0x00000001,
+ COMMAND_SET_FPS = 0x00000002,
+ COMMAND_SET_COLOR_PARAMS = 0x00000004,
+ COMMAND_GET_COLOR_PARAMS = 0x00000008,
+ COMMAND_SET_FORMAT = 0x00000010, /* size, etc */
+ COMMAND_SET_FLICKER = 0x00000020
+};
+
+/***
+ * Some defines specific to the 676 chip
+ ***/
+#define CAMACC_CIF 0x01
+#define CAMACC_VGA 0x02
+#define CAMACC_QCIF 0x04
+#define CAMACC_QVGA 0x08
+
+
+struct cpia2_register {
+ u8 index;
+ u8 value;
+};
+
+struct cpia2_reg_mask {
+ u8 index;
+ u8 and_mask;
+ u8 or_mask;
+ u8 fill;
+};
+
+struct cpia2_command {
+ u32 command;
+ u8 req_mode; /* (Block or random) | registerBank */
+ u8 reg_count;
+ u8 direction;
+ u8 start;
+ union reg_types {
+ struct cpia2_register registers[32];
+ struct cpia2_reg_mask masks[16];
+ u8 block_data[64];
+ u8 *patch_data; /* points to function defined block */
+ } buffer;
+};
+
+struct camera_params {
+ struct {
+ u8 firmware_revision_hi; /* For system register set (bank 0) */
+ u8 firmware_revision_lo;
+ u8 asic_id; /* Video Compressor set (bank 1) */
+ u8 asic_rev;
+ u8 vp_device_hi; /* Video Processor set (bank 2) */
+ u8 vp_device_lo;
+ u8 sensor_flags;
+ u8 sensor_rev;
+ } version;
+
+ struct {
+ u32 device_type; /* enumerated from vendor/product ids.
+ * Currently, either STV_672 or STV_676 */
+ u16 vendor;
+ u16 product;
+ u16 device_revision;
+ } pnp_id;
+
+ struct {
+ u8 brightness; /* CPIA2_VP_EXPOSURE_TARGET */
+ u8 contrast; /* Note: this is CPIA2_VP_YRANGE */
+ u8 saturation; /* CPIA2_VP_SATURATION */
+ } color_params;
+
+ struct {
+ u8 cam_register;
+ u8 flicker_mode_req; /* 1 if flicker on, else never flicker */
+ int mains_frequency;
+ } flicker_control;
+
+ struct {
+ u8 jpeg_options;
+ u8 creep_period;
+ u8 user_squeeze;
+ u8 inhibit_htables;
+ } compression;
+
+ struct {
+ u8 ohsize; /* output image size */
+ u8 ovsize;
+ u8 hcrop; /* cropping start_pos/4 */
+ u8 vcrop;
+ u8 hphase; /* scaling registers */
+ u8 vphase;
+ u8 hispan;
+ u8 vispan;
+ u8 hicrop;
+ u8 vicrop;
+ u8 hifraction;
+ u8 vifraction;
+ } image_size;
+
+ struct {
+ int width; /* actual window width */
+ int height; /* actual window height */
+ } roi;
+
+ struct {
+ u8 video_mode;
+ u8 frame_rate;
+ u8 video_size; /* Not a register, just a convenience for cropped sizes */
+ u8 gpio_direction;
+ u8 gpio_data;
+ u8 system_ctrl;
+ u8 system_state;
+ u8 lowlight_boost; /* Bool: 0 = off, 1 = on */
+ u8 device_config;
+ u8 exposure_modes;
+ u8 user_effects;
+ } vp_params;
+
+ struct {
+ u8 pw_control;
+ u8 wakeup;
+ u8 vc_control;
+ u8 vc_mp_direction;
+ u8 vc_mp_data;
+ u8 target_kb;
+ } vc_params;
+
+ struct {
+ u8 power_mode;
+ u8 system_ctrl;
+ u8 stream_mode; /* This is the current alternate for usb drivers */
+ u8 allow_corrupt;
+ } camera_state;
+};
+
+#define NUM_SBUF 2
+
+struct cpia2_sbuf {
+ char *data;
+ struct urb *urb;
+};
+
+struct framebuf {
+ struct timeval timestamp;
+ unsigned long seq;
+ int num;
+ int length;
+ int max_length;
+ volatile enum frame_status status;
+ u8 *data;
+ struct framebuf *next;
+};
+
+struct cpia2_fh {
+ enum v4l2_priority prio;
+ u8 mmapped;
+};
+
+struct camera_data {
+ /* locks */
+ struct semaphore busy_lock; /* guard against SMP multithreading */
+ struct v4l2_prio_state prio;
+
+ /* camera status */
+ volatile int present; /* Is the camera still present? */
+ int open_count; /* # of process that have camera open */
+ int first_image_seen;
+ u8 mains_freq; /* for flicker control */
+ enum sensors sensor_type;
+ u8 flush;
+ u8 mmapped;
+ int streaming; /* 0 = no, 1 = yes */
+ int xfer_mode; /* XFER_BULK or XFER_ISOC */
+ struct camera_params params; /* camera settings */
+
+ /* v4l */
+ int video_size; /* VIDEO_SIZE_ */
+ struct video_device *vdev; /* v4l videodev */
+ struct video_picture vp; /* v4l camera settings */
+ struct video_window vw; /* v4l capture area */
+ __u32 pixelformat; /* Format fourcc */
+
+ /* USB */
+ struct usb_device *dev;
+ unsigned char iface;
+ unsigned int cur_alt;
+ unsigned int old_alt;
+ struct cpia2_sbuf sbuf[NUM_SBUF]; /* Double buffering */
+
+ wait_queue_head_t wq_stream;
+
+ /* Buffering */
+ u32 frame_size;
+ int num_frames;
+ unsigned long frame_count;
+ u8 *frame_buffer; /* frame buffer data */
+ struct framebuf *buffers;
+ struct framebuf * volatile curbuff;
+ struct framebuf *workbuff;
+
+ /* MJPEG Extension */
+ int APPn; /* Number of APP segment to be written, must be 0..15 */
+ int APP_len; /* Length of data in JPEG APPn segment */
+ char APP_data[60]; /* Data in the JPEG APPn segment. */
+
+ int COM_len; /* Length of data in JPEG COM segment */
+ char COM_data[60]; /* Data in JPEG COM segment */
+};
+
+/* v4l */
+int cpia2_register_camera(struct camera_data *cam);
+void cpia2_unregister_camera(struct camera_data *cam);
+
+/* core */
+int cpia2_reset_camera(struct camera_data *cam);
+int cpia2_set_low_power(struct camera_data *cam);
+void cpia2_dbg_dump_registers(struct camera_data *cam);
+int cpia2_match_video_size(int width, int height);
+void cpia2_set_camera_state(struct camera_data *cam);
+void cpia2_save_camera_state(struct camera_data *cam);
+void cpia2_set_color_params(struct camera_data *cam);
+void cpia2_set_brightness(struct camera_data *cam, unsigned char value);
+void cpia2_set_contrast(struct camera_data *cam, unsigned char value);
+void cpia2_set_saturation(struct camera_data *cam, unsigned char value);
+int cpia2_set_flicker_mode(struct camera_data *cam, int mode);
+void cpia2_set_format(struct camera_data *cam);
+int cpia2_send_command(struct camera_data *cam, struct cpia2_command *cmd);
+int cpia2_do_command(struct camera_data *cam,
+ unsigned int command,
+ unsigned char direction, unsigned char param);
+struct camera_data *cpia2_init_camera_struct(void);
+int cpia2_init_camera(struct camera_data *cam);
+int cpia2_allocate_buffers(struct camera_data *cam);
+void cpia2_free_buffers(struct camera_data *cam);
+long cpia2_read(struct camera_data *cam,
+ char *buf, unsigned long count, int noblock);
+unsigned int cpia2_poll(struct camera_data *cam,
+ struct file *filp, poll_table *wait);
+int cpia2_remap_buffer(struct camera_data *cam, struct vm_area_struct *vma);
+void cpia2_set_property_flip(struct camera_data *cam, int prop_val);
+void cpia2_set_property_mirror(struct camera_data *cam, int prop_val);
+int cpia2_set_target_kb(struct camera_data *cam, unsigned char value);
+int cpia2_set_gpio(struct camera_data *cam, unsigned char setting);
+int cpia2_set_fps(struct camera_data *cam, int framerate);
+
+/* usb */
+int cpia2_usb_init(void);
+void cpia2_usb_cleanup(void);
+int cpia2_usb_transfer_cmd(struct camera_data *cam, void *registers,
+ u8 request, u8 start, u8 count, u8 direction);
+int cpia2_usb_stream_start(struct camera_data *cam, unsigned int alternate);
+int cpia2_usb_stream_stop(struct camera_data *cam);
+int cpia2_usb_stream_pause(struct camera_data *cam);
+int cpia2_usb_stream_resume(struct camera_data *cam);
+int cpia2_usb_change_streaming_alternate(struct camera_data *cam,
+ unsigned int alt);
+
+
+/* ----------------------- debug functions ---------------------- */
+#ifdef _CPIA2_DEBUG_
+#define ALOG(lev, fmt, args...) printk(lev "%s:%d %s(): " fmt, __FILE__, __LINE__, __func__, ## args)
+#define LOG(fmt, args...) ALOG(KERN_INFO, fmt, ## args)
+#define ERR(fmt, args...) ALOG(KERN_ERR, fmt, ## args)
+#define DBG(fmt, args...) ALOG(KERN_DEBUG, fmt, ## args)
+#else
+#define ALOG(fmt,args...) printk(fmt,##args)
+#define LOG(fmt,args...) ALOG(KERN_INFO "cpia2: "fmt,##args)
+#define ERR(fmt,args...) ALOG(KERN_ERR "cpia2: "fmt,##args)
+#define DBG(fmn,args...) do {} while(0)
+#endif
+/* No function or lineno, for shorter lines */
+#define KINFO(fmt, args...) printk(KERN_INFO fmt,##args)
+
+#endif
diff --git a/drivers/media/video/cpia2/cpia2_core.c b/drivers/media/video/cpia2/cpia2_core.c
new file mode 100644
index 00000000000..5dfb242d5b8
--- /dev/null
+++ b/drivers/media/video/cpia2/cpia2_core.c
@@ -0,0 +1,2525 @@
+/****************************************************************************
+ *
+ * Filename: cpia2_core.c
+ *
+ * Copyright 2001, STMicrolectronics, Inc.
+ * Contact: steve.miller@st.com
+ *
+ * Description:
+ * This is a USB driver for CPia2 based video cameras.
+ * The infrastructure of this driver is based on the cpia usb driver by
+ * Jochen Scharrlach and Johannes Erdfeldt.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Stripped of 2.4 stuff ready for main kernel submit by
+ * Alan Cox <alan@redhat.com>
+ *
+ ****************************************************************************/
+
+#include "cpia2.h"
+
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+
+//#define _CPIA2_DEBUG_
+
+#include "cpia2patch.h"
+
+#ifdef _CPIA2_DEBUG_
+
+static const char *block_name[] = {
+ "System",
+ "VC",
+ "VP",
+ "IDATA"
+};
+#endif
+
+static unsigned int debugs_on = 0;//DEBUG_REG;
+
+
+/******************************************************************************
+ *
+ * Forward Declarations
+ *
+ *****************************************************************************/
+static int apply_vp_patch(struct camera_data *cam);
+static int set_default_user_mode(struct camera_data *cam);
+static int set_vw_size(struct camera_data *cam, int size);
+static int configure_sensor(struct camera_data *cam,
+ int reqwidth, int reqheight);
+static int config_sensor_410(struct camera_data *cam,
+ int reqwidth, int reqheight);
+static int config_sensor_500(struct camera_data *cam,
+ int reqwidth, int reqheight);
+static int set_all_properties(struct camera_data *cam);
+static void get_color_params(struct camera_data *cam);
+static void wake_system(struct camera_data *cam);
+static void set_lowlight_boost(struct camera_data *cam);
+static void reset_camera_struct(struct camera_data *cam);
+static int cpia2_set_high_power(struct camera_data *cam);
+
+/* Here we want the physical address of the memory.
+ * This is used when initializing the contents of the
+ * area and marking the pages as reserved.
+ */
+static inline unsigned long kvirt_to_pa(unsigned long adr)
+{
+ unsigned long kva, ret;
+
+ kva = (unsigned long) page_address(vmalloc_to_page((void *)adr));
+ kva |= adr & (PAGE_SIZE-1); /* restore the offset */
+ ret = __pa(kva);
+ return ret;
+}
+
+static void *rvmalloc(unsigned long size)
+{
+ void *mem;
+ unsigned long adr;
+
+ /* Round it off to PAGE_SIZE */
+ size = PAGE_ALIGN(size);
+
+ mem = vmalloc_32(size);
+ if (!mem)
+ return NULL;
+
+ memset(mem, 0, size); /* Clear the ram out, no junk to the user */
+ adr = (unsigned long) mem;
+
+ while ((long)size > 0) {
+ SetPageReserved(vmalloc_to_page((void *)adr));
+ adr += PAGE_SIZE;
+ size -= PAGE_SIZE;
+ }
+ return mem;
+}
+
+static void rvfree(void *mem, unsigned long size)
+{
+ unsigned long adr;
+
+ if (!mem)
+ return;
+
+ size = PAGE_ALIGN(size);
+
+ adr = (unsigned long) mem;
+ while ((long)size > 0) {
+ ClearPageReserved(vmalloc_to_page((void *)adr));
+ adr += PAGE_SIZE;
+ size -= PAGE_SIZE;
+ }
+ vfree(mem);
+}
+
+/******************************************************************************
+ *
+ * cpia2_do_command
+ *
+ * Send an arbitrary command to the camera. For commands that read from
+ * the camera, copy the buffers into the proper param structures.
+ *****************************************************************************/
+int cpia2_do_command(struct camera_data *cam,
+ u32 command, u8 direction, u8 param)
+{
+ int retval = 0;
+ struct cpia2_command cmd;
+ unsigned int device = cam->params.pnp_id.device_type;
+
+ cmd.command = command;
+ cmd.reg_count = 2; /* default */
+ cmd.direction = direction;
+
+ /***
+ * Set up the command.
+ ***/
+ switch (command) {
+ case CPIA2_CMD_GET_VERSION:
+ cmd.req_mode =
+ CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM;
+ cmd.start = CPIA2_SYSTEM_DEVICE_HI;
+ break;
+ case CPIA2_CMD_GET_PNP_ID:
+ cmd.req_mode =
+ CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM;
+ cmd.reg_count = 8;
+ cmd.start = CPIA2_SYSTEM_DESCRIP_VID_HI;
+ break;
+ case CPIA2_CMD_GET_ASIC_TYPE:
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC;
+ cmd.start = CPIA2_VC_ASIC_ID;
+ break;
+ case CPIA2_CMD_GET_SENSOR:
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
+ cmd.start = CPIA2_VP_SENSOR_FLAGS;
+ break;
+ case CPIA2_CMD_GET_VP_DEVICE:
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
+ cmd.start = CPIA2_VP_DEVICEH;
+ break;
+ case CPIA2_CMD_SET_VP_BRIGHTNESS:
+ cmd.buffer.block_data[0] = param; /* Then fall through */
+ case CPIA2_CMD_GET_VP_BRIGHTNESS:
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
+ cmd.reg_count = 1;
+ if (device == DEVICE_STV_672)
+ cmd.start = CPIA2_VP4_EXPOSURE_TARGET;
+ else
+ cmd.start = CPIA2_VP5_EXPOSURE_TARGET;
+ break;
+ case CPIA2_CMD_SET_CONTRAST:
+ cmd.buffer.block_data[0] = param; /* Then fall through */
+ case CPIA2_CMD_GET_CONTRAST:
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
+ cmd.reg_count = 1;
+ cmd.start = CPIA2_VP_YRANGE;
+ break;
+ case CPIA2_CMD_SET_VP_SATURATION:
+ cmd.buffer.block_data[0] = param; /* Then fall through */
+ case CPIA2_CMD_GET_VP_SATURATION:
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
+ cmd.reg_count = 1;
+ if (device == DEVICE_STV_672)
+ cmd.start = CPIA2_VP_SATURATION;
+ else
+ cmd.start = CPIA2_VP5_MCUVSATURATION;
+ break;
+ case CPIA2_CMD_SET_VP_GPIO_DATA:
+ cmd.buffer.block_data[0] = param; /* Then fall through */
+ case CPIA2_CMD_GET_VP_GPIO_DATA:
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
+ cmd.reg_count = 1;
+ cmd.start = CPIA2_VP_GPIO_DATA;
+ break;
+ case CPIA2_CMD_SET_VP_GPIO_DIRECTION:
+ cmd.buffer.block_data[0] = param; /* Then fall through */
+ case CPIA2_CMD_GET_VP_GPIO_DIRECTION:
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
+ cmd.reg_count = 1;
+ cmd.start = CPIA2_VP_GPIO_DIRECTION;
+ break;
+ case CPIA2_CMD_SET_VC_MP_GPIO_DATA:
+ cmd.buffer.block_data[0] = param; /* Then fall through */
+ case CPIA2_CMD_GET_VC_MP_GPIO_DATA:
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC;
+ cmd.reg_count = 1;
+ cmd.start = CPIA2_VC_MP_DATA;
+ break;
+ case CPIA2_CMD_SET_VC_MP_GPIO_DIRECTION:
+ cmd.buffer.block_data[0] = param; /* Then fall through */
+ case CPIA2_CMD_GET_VC_MP_GPIO_DIRECTION:
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC;
+ cmd.reg_count = 1;
+ cmd.start = CPIA2_VC_MP_DIR;
+ break;
+ case CPIA2_CMD_ENABLE_PACKET_CTRL:
+ cmd.req_mode =
+ CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM;
+ cmd.start = CPIA2_SYSTEM_INT_PACKET_CTRL;
+ cmd.reg_count = 1;
+ cmd.buffer.block_data[0] = param;
+ break;
+ case CPIA2_CMD_SET_FLICKER_MODES:
+ cmd.buffer.block_data[0] = param; /* Then fall through */
+ case CPIA2_CMD_GET_FLICKER_MODES:
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
+ cmd.reg_count = 1;
+ cmd.start = CPIA2_VP_FLICKER_MODES;
+ break;
+ case CPIA2_CMD_RESET_FIFO: /* clear fifo and enable stream block */
+ cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VC;
+ cmd.reg_count = 2;
+ cmd.start = 0;
+ cmd.buffer.registers[0].index = CPIA2_VC_ST_CTRL;
+ cmd.buffer.registers[0].value = CPIA2_VC_ST_CTRL_SRC_VC |
+ CPIA2_VC_ST_CTRL_DST_USB | CPIA2_VC_ST_CTRL_EOF_DETECT;
+ cmd.buffer.registers[1].index = CPIA2_VC_ST_CTRL;
+ cmd.buffer.registers[1].value = CPIA2_VC_ST_CTRL_SRC_VC |
+ CPIA2_VC_ST_CTRL_DST_USB |
+ CPIA2_VC_ST_CTRL_EOF_DETECT |
+ CPIA2_VC_ST_CTRL_FIFO_ENABLE;
+ break;
+ case CPIA2_CMD_SET_HI_POWER:
+ cmd.req_mode =
+ CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_SYSTEM;
+ cmd.reg_count = 2;
+ cmd.buffer.registers[0].index =
+ CPIA2_SYSTEM_SYSTEM_CONTROL;
+ cmd.buffer.registers[1].index =
+ CPIA2_SYSTEM_SYSTEM_CONTROL;
+ cmd.buffer.registers[0].value = CPIA2_SYSTEM_CONTROL_CLEAR_ERR;
+ cmd.buffer.registers[1].value =
+ CPIA2_SYSTEM_CONTROL_HIGH_POWER;
+ break;
+ case CPIA2_CMD_SET_LOW_POWER:
+ cmd.req_mode =
+ CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM;
+ cmd.reg_count = 1;
+ cmd.start = CPIA2_SYSTEM_SYSTEM_CONTROL;
+ cmd.buffer.block_data[0] = 0;
+ break;
+ case CPIA2_CMD_CLEAR_V2W_ERR:
+ cmd.req_mode =
+ CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM;
+ cmd.reg_count = 1;
+ cmd.start = CPIA2_SYSTEM_SYSTEM_CONTROL;
+ cmd.buffer.block_data[0] = CPIA2_SYSTEM_CONTROL_CLEAR_ERR;
+ break;
+ case CPIA2_CMD_SET_USER_MODE: /* Then fall through */
+ cmd.buffer.block_data[0] = param;
+ case CPIA2_CMD_GET_USER_MODE:
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
+ cmd.reg_count = 1;
+ if (device == DEVICE_STV_672)
+ cmd.start = CPIA2_VP4_USER_MODE;
+ else
+ cmd.start = CPIA2_VP5_USER_MODE;
+ break;
+ case CPIA2_CMD_FRAMERATE_REQ:
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
+ cmd.reg_count = 1;
+ if (device == DEVICE_STV_672)
+ cmd.start = CPIA2_VP4_FRAMERATE_REQUEST;
+ else
+ cmd.start = CPIA2_VP5_FRAMERATE_REQUEST;
+ cmd.buffer.block_data[0] = param;
+ break;
+ case CPIA2_CMD_SET_WAKEUP:
+ cmd.buffer.block_data[0] = param; /* Then fall through */
+ case CPIA2_CMD_GET_WAKEUP:
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC;
+ cmd.reg_count = 1;
+ cmd.start = CPIA2_VC_WAKEUP;
+ break;
+ case CPIA2_CMD_SET_PW_CONTROL:
+ cmd.buffer.block_data[0] = param; /* Then fall through */
+ case CPIA2_CMD_GET_PW_CONTROL:
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC;
+ cmd.reg_count = 1;
+ cmd.start = CPIA2_VC_PW_CTRL;
+ break;
+ case CPIA2_CMD_GET_VP_SYSTEM_STATE:
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
+ cmd.reg_count = 1;
+ cmd.start = CPIA2_VP_SYSTEMSTATE;
+ break;
+ case CPIA2_CMD_SET_SYSTEM_CTRL:
+ cmd.buffer.block_data[0] = param; /* Then fall through */
+ case CPIA2_CMD_GET_SYSTEM_CTRL:
+ cmd.req_mode =
+ CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM;
+ cmd.reg_count = 1;
+ cmd.start = CPIA2_SYSTEM_SYSTEM_CONTROL;
+ break;
+ case CPIA2_CMD_SET_VP_SYSTEM_CTRL:
+ cmd.buffer.block_data[0] = param; /* Then fall through */
+ case CPIA2_CMD_GET_VP_SYSTEM_CTRL:
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
+ cmd.reg_count = 1;
+ cmd.start = CPIA2_VP_SYSTEMCTRL;
+ break;
+ case CPIA2_CMD_SET_VP_EXP_MODES:
+ cmd.buffer.block_data[0] = param; /* Then fall through */
+ case CPIA2_CMD_GET_VP_EXP_MODES:
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
+ cmd.reg_count = 1;
+ cmd.start = CPIA2_VP_EXPOSURE_MODES;
+ break;
+ case CPIA2_CMD_SET_DEVICE_CONFIG:
+ cmd.buffer.block_data[0] = param; /* Then fall through */
+ case CPIA2_CMD_GET_DEVICE_CONFIG:
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
+ cmd.reg_count = 1;
+ cmd.start = CPIA2_VP_DEVICE_CONFIG;
+ break;
+ case CPIA2_CMD_SET_SERIAL_ADDR:
+ cmd.buffer.block_data[0] = param;
+ cmd.req_mode =
+ CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM;
+ cmd.reg_count = 1;
+ cmd.start = CPIA2_SYSTEM_VP_SERIAL_ADDR;
+ break;
+ case CPIA2_CMD_SET_SENSOR_CR1:
+ cmd.buffer.block_data[0] = param;
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
+ cmd.reg_count = 1;
+ cmd.start = CPIA2_SENSOR_CR1;
+ break;
+ case CPIA2_CMD_SET_VC_CONTROL:
+ cmd.buffer.block_data[0] = param; /* Then fall through */
+ case CPIA2_CMD_GET_VC_CONTROL:
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC;
+ cmd.reg_count = 1;
+ cmd.start = CPIA2_VC_VC_CTRL;
+ break;
+ case CPIA2_CMD_SET_TARGET_KB:
+ cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VC;
+ cmd.reg_count = 1;
+ cmd.buffer.registers[0].index = CPIA2_VC_VC_TARGET_KB;
+ cmd.buffer.registers[0].value = param;
+ break;
+ case CPIA2_CMD_SET_DEF_JPEG_OPT:
+ cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VC;
+ cmd.reg_count = 4;
+ cmd.buffer.registers[0].index = CPIA2_VC_VC_JPEG_OPT;
+ cmd.buffer.registers[0].value =
+ CPIA2_VC_VC_JPEG_OPT_DOUBLE_SQUEEZE;
+ cmd.buffer.registers[1].index = CPIA2_VC_VC_USER_SQUEEZE;
+ cmd.buffer.registers[1].value = 20;
+ cmd.buffer.registers[2].index = CPIA2_VC_VC_CREEP_PERIOD;
+ cmd.buffer.registers[2].value = 2;
+ cmd.buffer.registers[3].index = CPIA2_VC_VC_JPEG_OPT;
+ cmd.buffer.registers[3].value = CPIA2_VC_VC_JPEG_OPT_DEFAULT;
+ break;
+ case CPIA2_CMD_REHASH_VP4:
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
+ cmd.reg_count = 1;
+ cmd.start = CPIA2_VP_REHASH_VALUES;
+ cmd.buffer.block_data[0] = param;
+ break;
+ case CPIA2_CMD_SET_USER_EFFECTS: /* Note: Be careful with this as
+ this register can also affect
+ flicker modes */
+ cmd.buffer.block_data[0] = param; /* Then fall through */
+ case CPIA2_CMD_GET_USER_EFFECTS:
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
+ cmd.reg_count = 1;
+ if (device == DEVICE_STV_672)
+ cmd.start = CPIA2_VP4_USER_EFFECTS;
+ else
+ cmd.start = CPIA2_VP5_USER_EFFECTS;
+ break;
+ default:
+ LOG("DoCommand received invalid command\n");
+ return -EINVAL;
+ }
+
+ retval = cpia2_send_command(cam, &cmd);
+ if (retval) {
+ return retval;
+ }
+
+ /***
+ * Now copy any results from a read into the appropriate param struct.
+ ***/
+ switch (command) {
+ case CPIA2_CMD_GET_VERSION:
+ cam->params.version.firmware_revision_hi =
+ cmd.buffer.block_data[0];
+ cam->params.version.firmware_revision_lo =
+ cmd.buffer.block_data[1];
+ break;
+ case CPIA2_CMD_GET_PNP_ID:
+ cam->params.pnp_id.vendor = (cmd.buffer.block_data[0] << 8) |
+ cmd.buffer.block_data[1];
+ cam->params.pnp_id.product = (cmd.buffer.block_data[2] << 8) |
+ cmd.buffer.block_data[3];
+ cam->params.pnp_id.device_revision =
+ (cmd.buffer.block_data[4] << 8) |
+ cmd.buffer.block_data[5];
+ if (cam->params.pnp_id.vendor == 0x553) {
+ if (cam->params.pnp_id.product == 0x100) {
+ cam->params.pnp_id.device_type = DEVICE_STV_672;
+ } else if (cam->params.pnp_id.product == 0x140 ||
+ cam->params.pnp_id.product == 0x151) {
+ cam->params.pnp_id.device_type = DEVICE_STV_676;
+ }
+ }
+ break;
+ case CPIA2_CMD_GET_ASIC_TYPE:
+ cam->params.version.asic_id = cmd.buffer.block_data[0];
+ cam->params.version.asic_rev = cmd.buffer.block_data[1];
+ break;
+ case CPIA2_CMD_GET_SENSOR:
+ cam->params.version.sensor_flags = cmd.buffer.block_data[0];
+ cam->params.version.sensor_rev = cmd.buffer.block_data[1];
+ break;
+ case CPIA2_CMD_GET_VP_DEVICE:
+ cam->params.version.vp_device_hi = cmd.buffer.block_data[0];
+ cam->params.version.vp_device_lo = cmd.buffer.block_data[1];
+ break;
+ case CPIA2_CMD_GET_VP_BRIGHTNESS:
+ cam->params.color_params.brightness = cmd.buffer.block_data[0];
+ break;
+ case CPIA2_CMD_GET_CONTRAST:
+ cam->params.color_params.contrast = cmd.buffer.block_data[0];
+ break;
+ case CPIA2_CMD_GET_VP_SATURATION:
+ cam->params.color_params.saturation = cmd.buffer.block_data[0];
+ break;
+ case CPIA2_CMD_GET_VP_GPIO_DATA:
+ cam->params.vp_params.gpio_data = cmd.buffer.block_data[0];
+ break;
+ case CPIA2_CMD_GET_VP_GPIO_DIRECTION:
+ cam->params.vp_params.gpio_direction = cmd.buffer.block_data[0];
+ break;
+ case CPIA2_CMD_GET_VC_MP_GPIO_DIRECTION:
+ cam->params.vc_params.vc_mp_direction =cmd.buffer.block_data[0];
+ break;
+ case CPIA2_CMD_GET_VC_MP_GPIO_DATA:
+ cam->params.vc_params.vc_mp_data = cmd.buffer.block_data[0];
+ break;
+ case CPIA2_CMD_GET_FLICKER_MODES:
+ cam->params.flicker_control.cam_register =
+ cmd.buffer.block_data[0];
+ break;
+ case CPIA2_CMD_GET_WAKEUP:
+ cam->params.vc_params.wakeup = cmd.buffer.block_data[0];
+ break;
+ case CPIA2_CMD_GET_PW_CONTROL:
+ cam->params.vc_params.pw_control = cmd.buffer.block_data[0];
+ break;
+ case CPIA2_CMD_GET_SYSTEM_CTRL:
+ cam->params.camera_state.system_ctrl = cmd.buffer.block_data[0];
+ break;
+ case CPIA2_CMD_GET_VP_SYSTEM_STATE:
+ cam->params.vp_params.system_state = cmd.buffer.block_data[0];
+ break;
+ case CPIA2_CMD_GET_VP_SYSTEM_CTRL:
+ cam->params.vp_params.system_ctrl = cmd.buffer.block_data[0];
+ break;
+ case CPIA2_CMD_GET_VP_EXP_MODES:
+ cam->params.vp_params.exposure_modes = cmd.buffer.block_data[0];
+ break;
+ case CPIA2_CMD_GET_DEVICE_CONFIG:
+ cam->params.vp_params.device_config = cmd.buffer.block_data[0];
+ break;
+ case CPIA2_CMD_GET_VC_CONTROL:
+ cam->params.vc_params.vc_control = cmd.buffer.block_data[0];
+ break;
+ case CPIA2_CMD_GET_USER_MODE:
+ cam->params.vp_params.video_mode = cmd.buffer.block_data[0];
+ break;
+ case CPIA2_CMD_GET_USER_EFFECTS:
+ cam->params.vp_params.user_effects = cmd.buffer.block_data[0];
+ break;
+ default:
+ break;
+ }
+ return retval;
+}
+
+/******************************************************************************
+ *
+ * cpia2_send_command
+ *
+ *****************************************************************************/
+int cpia2_send_command(struct camera_data *cam, struct cpia2_command *cmd)
+{
+ u8 count;
+ u8 start;
+ u8 block_index;
+ u8 *buffer;
+ int retval;
+ const char* dir;
+
+ if (cmd->direction == TRANSFER_WRITE) {
+ dir = "Write";
+ } else {
+ dir = "Read";
+ }
+
+ block_index = cmd->req_mode & 0x03;
+
+ switch (cmd->req_mode & 0x0c) {
+ case CAMERAACCESS_TYPE_RANDOM:
+ count = cmd->reg_count * sizeof(struct cpia2_register);
+ start = 0;
+ buffer = (u8 *) & cmd->buffer;
+ if (debugs_on & DEBUG_REG)
+ DBG("%s Random: Register block %s\n", dir,
+ block_name[block_index]);
+ break;
+ case CAMERAACCESS_TYPE_BLOCK:
+ count = cmd->reg_count;
+ start = cmd->start;
+ buffer = cmd->buffer.block_data;
+ if (debugs_on & DEBUG_REG)
+ DBG("%s Block: Register block %s\n", dir,
+ block_name[block_index]);
+ break;
+ case CAMERAACCESS_TYPE_MASK:
+ count = cmd->reg_count * sizeof(struct cpia2_reg_mask);
+ start = 0;
+ buffer = (u8 *) & cmd->buffer;
+ if (debugs_on & DEBUG_REG)
+ DBG("%s Mask: Register block %s\n", dir,
+ block_name[block_index]);
+ break;
+ case CAMERAACCESS_TYPE_REPEAT: /* For patch blocks only */
+ count = cmd->reg_count;
+ start = cmd->start;
+ buffer = cmd->buffer.block_data;
+ if (debugs_on & DEBUG_REG)
+ DBG("%s Repeat: Register block %s\n", dir,
+ block_name[block_index]);
+ break;
+ default:
+ LOG("%s: invalid request mode\n",__FUNCTION__);
+ return -EINVAL;
+ }
+
+ retval = cpia2_usb_transfer_cmd(cam,
+ buffer,
+ cmd->req_mode,
+ start, count, cmd->direction);
+#ifdef _CPIA2_DEBUG_
+ if (debugs_on & DEBUG_REG) {
+ int i;
+ for (i = 0; i < cmd->reg_count; i++) {
+ if((cmd->req_mode & 0x0c) == CAMERAACCESS_TYPE_BLOCK)
+ KINFO("%s Block: [0x%02X] = 0x%02X\n",
+ dir, start + i, buffer[i]);
+ if((cmd->req_mode & 0x0c) == CAMERAACCESS_TYPE_RANDOM)
+ KINFO("%s Random: [0x%02X] = 0x%02X\n",
+ dir, cmd->buffer.registers[i].index,
+ cmd->buffer.registers[i].value);
+ }
+ }
+#endif
+
+ return retval;
+};
+
+/*************
+ * Functions to implement camera functionality
+ *************/
+/******************************************************************************
+ *
+ * cpia2_get_version_info
+ *
+ *****************************************************************************/
+static void cpia2_get_version_info(struct camera_data *cam)
+{
+ cpia2_do_command(cam, CPIA2_CMD_GET_VERSION, TRANSFER_READ, 0);
+ cpia2_do_command(cam, CPIA2_CMD_GET_PNP_ID, TRANSFER_READ, 0);
+ cpia2_do_command(cam, CPIA2_CMD_GET_ASIC_TYPE, TRANSFER_READ, 0);
+ cpia2_do_command(cam, CPIA2_CMD_GET_SENSOR, TRANSFER_READ, 0);
+ cpia2_do_command(cam, CPIA2_CMD_GET_VP_DEVICE, TRANSFER_READ, 0);
+}
+
+/******************************************************************************
+ *
+ * cpia2_reset_camera
+ *
+ * Called at least during the open process, sets up initial params.
+ *****************************************************************************/
+int cpia2_reset_camera(struct camera_data *cam)
+{
+ u8 tmp_reg;
+ int retval = 0;
+ int i;
+ struct cpia2_command cmd;
+
+ /***
+ * VC setup
+ ***/
+ retval = configure_sensor(cam,
+ cam->params.roi.width,
+ cam->params.roi.height);
+ if (retval < 0) {
+ ERR("Couldn't configure sensor, error=%d\n", retval);
+ return retval;
+ }
+
+ /* Clear FIFO and route/enable stream block */
+ cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VC;
+ cmd.direction = TRANSFER_WRITE;
+ cmd.reg_count = 2;
+ cmd.buffer.registers[0].index = CPIA2_VC_ST_CTRL;
+ cmd.buffer.registers[0].value = CPIA2_VC_ST_CTRL_SRC_VC |
+ CPIA2_VC_ST_CTRL_DST_USB | CPIA2_VC_ST_CTRL_EOF_DETECT;
+ cmd.buffer.registers[1].index = CPIA2_VC_ST_CTRL;
+ cmd.buffer.registers[1].value = CPIA2_VC_ST_CTRL_SRC_VC |
+ CPIA2_VC_ST_CTRL_DST_USB |
+ CPIA2_VC_ST_CTRL_EOF_DETECT | CPIA2_VC_ST_CTRL_FIFO_ENABLE;
+
+ cpia2_send_command(cam, &cmd);
+
+ cpia2_set_high_power(cam);
+
+ if (cam->params.pnp_id.device_type == DEVICE_STV_672) {
+ /* Enable button notification */
+ cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_SYSTEM;
+ cmd.buffer.registers[0].index = CPIA2_SYSTEM_INT_PACKET_CTRL;
+ cmd.buffer.registers[0].value =
+ CPIA2_SYSTEM_INT_PACKET_CTRL_ENABLE_SW_XX;
+ cmd.reg_count = 1;
+ cpia2_send_command(cam, &cmd);
+ }
+
+ current->state = TASK_INTERRUPTIBLE;
+ schedule_timeout(100 * HZ / 1000); /* wait for 100 msecs */
+
+ if (cam->params.pnp_id.device_type == DEVICE_STV_672)
+ retval = apply_vp_patch(cam);
+
+ /* wait for vp to go to sleep */
+ current->state = TASK_INTERRUPTIBLE;
+ schedule_timeout(100 * HZ / 1000); /* wait for 100 msecs */
+
+ /***
+ * If this is a 676, apply VP5 fixes before we start streaming
+ ***/
+ if (cam->params.pnp_id.device_type == DEVICE_STV_676) {
+ cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VP;
+
+ /* The following writes improve the picture */
+ cmd.buffer.registers[0].index = CPIA2_VP5_MYBLACK_LEVEL;
+ cmd.buffer.registers[0].value = 0; /* reduce from the default
+ * rec 601 pedestal of 16 */
+ cmd.buffer.registers[1].index = CPIA2_VP5_MCYRANGE;
+ cmd.buffer.registers[1].value = 0x92; /* increase from 100% to
+ * (256/256 - 31) to fill
+ * available range */
+ cmd.buffer.registers[2].index = CPIA2_VP5_MYCEILING;
+ cmd.buffer.registers[2].value = 0xFF; /* Increase from the
+ * default rec 601 ceiling
+ * of 240 */
+ cmd.buffer.registers[3].index = CPIA2_VP5_MCUVSATURATION;
+ cmd.buffer.registers[3].value = 0xFF; /* Increase from the rec
+ * 601 100% level (128)
+ * to 145-192 */
+ cmd.buffer.registers[4].index = CPIA2_VP5_ANTIFLKRSETUP;
+ cmd.buffer.registers[4].value = 0x80; /* Inhibit the
+ * anti-flicker */
+
+ /* The following 4 writes are a fix to allow QVGA to work at 30 fps */
+ cmd.buffer.registers[5].index = CPIA2_VP_RAM_ADDR_H;
+ cmd.buffer.registers[5].value = 0x01;
+ cmd.buffer.registers[6].index = CPIA2_VP_RAM_ADDR_L;
+ cmd.buffer.registers[6].value = 0xE3;
+ cmd.buffer.registers[7].index = CPIA2_VP_RAM_DATA;
+ cmd.buffer.registers[7].value = 0x02;
+ cmd.buffer.registers[8].index = CPIA2_VP_RAM_DATA;
+ cmd.buffer.registers[8].value = 0xFC;
+
+ cmd.direction = TRANSFER_WRITE;
+ cmd.reg_count = 9;
+
+ cpia2_send_command(cam, &cmd);
+ }
+
+ /* Activate all settings and start the data stream */
+ /* Set user mode */
+ set_default_user_mode(cam);
+
+ /* Give VP time to wake up */
+ current->state = TASK_INTERRUPTIBLE;
+ schedule_timeout(100 * HZ / 1000); /* wait for 100 msecs */
+
+ set_all_properties(cam);
+
+ cpia2_do_command(cam, CPIA2_CMD_GET_USER_MODE, TRANSFER_READ, 0);
+ DBG("After SetAllProperties(cam), user mode is 0x%0X\n",
+ cam->params.vp_params.video_mode);
+
+ /***
+ * Set audio regulator off. This and the code to set the compresison
+ * state are too complex to form a CPIA2_CMD_, and seem to be somewhat
+ * intertwined. This stuff came straight from the windows driver.
+ ***/
+ /* Turn AutoExposure off in VP and enable the serial bridge to the sensor */
+ cpia2_do_command(cam, CPIA2_CMD_GET_VP_SYSTEM_CTRL, TRANSFER_READ, 0);
+ tmp_reg = cam->params.vp_params.system_ctrl;
+ cmd.buffer.registers[0].value = tmp_reg &
+ (tmp_reg & (CPIA2_VP_SYSTEMCTRL_HK_CONTROL ^ 0xFF));
+
+ cpia2_do_command(cam, CPIA2_CMD_GET_DEVICE_CONFIG, TRANSFER_READ, 0);
+ cmd.buffer.registers[1].value = cam->params.vp_params.device_config |
+ CPIA2_VP_DEVICE_CONFIG_SERIAL_BRIDGE;
+ cmd.buffer.registers[0].index = CPIA2_VP_SYSTEMCTRL;
+ cmd.buffer.registers[1].index = CPIA2_VP_DEVICE_CONFIG;
+ cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VP;
+ cmd.reg_count = 2;
+ cmd.direction = TRANSFER_WRITE;
+ cmd.start = 0;
+ cpia2_send_command(cam, &cmd);
+
+ /* Set the correct I2C address in the CPiA-2 system register */
+ cpia2_do_command(cam,
+ CPIA2_CMD_SET_SERIAL_ADDR,
+ TRANSFER_WRITE,
+ CPIA2_SYSTEM_VP_SERIAL_ADDR_SENSOR);
+
+ /* Now have sensor access - set bit to turn the audio regulator off */
+ cpia2_do_command(cam,
+ CPIA2_CMD_SET_SENSOR_CR1,
+ TRANSFER_WRITE, CPIA2_SENSOR_CR1_DOWN_AUDIO_REGULATOR);
+
+ /* Set the correct I2C address in the CPiA-2 system register */
+ if (cam->params.pnp_id.device_type == DEVICE_STV_672)
+ cpia2_do_command(cam,
+ CPIA2_CMD_SET_SERIAL_ADDR,
+ TRANSFER_WRITE,
+ CPIA2_SYSTEM_VP_SERIAL_ADDR_VP); // 0x88
+ else
+ cpia2_do_command(cam,
+ CPIA2_CMD_SET_SERIAL_ADDR,
+ TRANSFER_WRITE,
+ CPIA2_SYSTEM_VP_SERIAL_ADDR_676_VP); // 0x8a
+
+ /* increase signal drive strength */
+ if (cam->params.pnp_id.device_type == DEVICE_STV_676)
+ cpia2_do_command(cam,
+ CPIA2_CMD_SET_VP_EXP_MODES,
+ TRANSFER_WRITE,
+ CPIA2_VP_EXPOSURE_MODES_COMPILE_EXP);
+
+ /* Start autoexposure */
+ cpia2_do_command(cam, CPIA2_CMD_GET_DEVICE_CONFIG, TRANSFER_READ, 0);
+ cmd.buffer.registers[0].value = cam->params.vp_params.device_config &
+ (CPIA2_VP_DEVICE_CONFIG_SERIAL_BRIDGE ^ 0xFF);
+
+ cpia2_do_command(cam, CPIA2_CMD_GET_VP_SYSTEM_CTRL, TRANSFER_READ, 0);
+ cmd.buffer.registers[1].value =
+ cam->params.vp_params.system_ctrl | CPIA2_VP_SYSTEMCTRL_HK_CONTROL;
+
+ cmd.buffer.registers[0].index = CPIA2_VP_DEVICE_CONFIG;
+ cmd.buffer.registers[1].index = CPIA2_VP_SYSTEMCTRL;
+ cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VP;
+ cmd.reg_count = 2;
+ cmd.direction = TRANSFER_WRITE;
+
+ cpia2_send_command(cam, &cmd);
+
+ /* Set compression state */
+ cpia2_do_command(cam, CPIA2_CMD_GET_VC_CONTROL, TRANSFER_READ, 0);
+ if (cam->params.compression.inhibit_htables) {
+ tmp_reg = cam->params.vc_params.vc_control |
+ CPIA2_VC_VC_CTRL_INHIBIT_H_TABLES;
+ } else {
+ tmp_reg = cam->params.vc_params.vc_control &
+ ~CPIA2_VC_VC_CTRL_INHIBIT_H_TABLES;
+ }
+ cpia2_do_command(cam, CPIA2_CMD_SET_VC_CONTROL, TRANSFER_WRITE,tmp_reg);
+
+ /* Set target size (kb) on vc */
+ cpia2_do_command(cam, CPIA2_CMD_SET_TARGET_KB,
+ TRANSFER_WRITE, cam->params.vc_params.target_kb);
+
+ /* Wiggle VC Reset */
+ /***
+ * First read and wait a bit.
+ ***/
+ for (i = 0; i < 50; i++) {
+ cpia2_do_command(cam, CPIA2_CMD_GET_PW_CONTROL,
+ TRANSFER_READ, 0);
+ }
+
+ tmp_reg = cam->params.vc_params.pw_control;
+ tmp_reg &= ~CPIA2_VC_PW_CTRL_VC_RESET_N;
+
+ cpia2_do_command(cam, CPIA2_CMD_SET_PW_CONTROL, TRANSFER_WRITE,tmp_reg);
+
+ tmp_reg |= CPIA2_VC_PW_CTRL_VC_RESET_N;
+ cpia2_do_command(cam, CPIA2_CMD_SET_PW_CONTROL, TRANSFER_WRITE,tmp_reg);
+
+ cpia2_do_command(cam, CPIA2_CMD_SET_DEF_JPEG_OPT, TRANSFER_WRITE, 0);
+
+ cpia2_do_command(cam, CPIA2_CMD_GET_USER_MODE, TRANSFER_READ, 0);
+ DBG("After VC RESET, user mode is 0x%0X\n",
+ cam->params.vp_params.video_mode);
+
+ return retval;
+}
+
+/******************************************************************************
+ *
+ * cpia2_set_high_power
+ *
+ *****************************************************************************/
+static int cpia2_set_high_power(struct camera_data *cam)
+{
+ int i;
+ for (i = 0; i <= 50; i++) {
+ /* Read system status */
+ cpia2_do_command(cam,CPIA2_CMD_GET_SYSTEM_CTRL,TRANSFER_READ,0);
+
+ /* If there is an error, clear it */
+ if(cam->params.camera_state.system_ctrl &
+ CPIA2_SYSTEM_CONTROL_V2W_ERR)
+ cpia2_do_command(cam, CPIA2_CMD_CLEAR_V2W_ERR,
+ TRANSFER_WRITE, 0);
+
+ /* Try to set high power mode */
+ cpia2_do_command(cam, CPIA2_CMD_SET_SYSTEM_CTRL,
+ TRANSFER_WRITE, 1);
+
+ /* Try to read something in VP to check if everything is awake */
+ cpia2_do_command(cam, CPIA2_CMD_GET_VP_SYSTEM_STATE,
+ TRANSFER_READ, 0);
+ if (cam->params.vp_params.system_state &
+ CPIA2_VP_SYSTEMSTATE_HK_ALIVE) {
+ break;
+ } else if (i == 50) {
+ cam->params.camera_state.power_mode = LO_POWER_MODE;
+ ERR("Camera did not wake up\n");
+ return -EIO;
+ }
+ }
+
+ DBG("System now in high power state\n");
+ cam->params.camera_state.power_mode = HI_POWER_MODE;
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * cpia2_set_low_power
+ *
+ *****************************************************************************/
+int cpia2_set_low_power(struct camera_data *cam)
+{
+ cam->params.camera_state.power_mode = LO_POWER_MODE;
+ cpia2_do_command(cam, CPIA2_CMD_SET_SYSTEM_CTRL, TRANSFER_WRITE, 0);
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * apply_vp_patch
+ *
+ *****************************************************************************/
+static int apply_vp_patch(struct camera_data *cam)
+{
+ int i, j;
+ struct cpia2_command cmd;
+
+ cmd.req_mode = CAMERAACCESS_TYPE_REPEAT | CAMERAACCESS_VP;
+ cmd.direction = TRANSFER_WRITE;
+
+ for (i = 0; i < PATCH_DATA_SIZE; i++) {
+ for (j = 0; j < patch_data[i].count; j++) {
+ cmd.buffer.block_data[j] = patch_data[i].data[j];
+ }
+
+ cmd.start = patch_data[i].reg;
+ cmd.reg_count = patch_data[i].count;
+ cpia2_send_command(cam, &cmd);
+ }
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * set_default_user_mode
+ *
+ *****************************************************************************/
+static int set_default_user_mode(struct camera_data *cam)
+{
+ unsigned char user_mode;
+ unsigned char frame_rate;
+ int width = cam->params.roi.width;
+ int height = cam->params.roi.height;
+
+ switch (cam->params.version.sensor_flags) {
+ case CPIA2_VP_SENSOR_FLAGS_404:
+ case CPIA2_VP_SENSOR_FLAGS_407:
+ case CPIA2_VP_SENSOR_FLAGS_409:
+ case CPIA2_VP_SENSOR_FLAGS_410:
+ if ((width > STV_IMAGE_QCIF_COLS)
+ || (height > STV_IMAGE_QCIF_ROWS)) {
+ user_mode = CPIA2_VP_USER_MODE_CIF;
+ } else {
+ user_mode = CPIA2_VP_USER_MODE_QCIFDS;
+ }
+ frame_rate = CPIA2_VP_FRAMERATE_30;
+ break;
+ case CPIA2_VP_SENSOR_FLAGS_500:
+ if ((width > STV_IMAGE_CIF_COLS)
+ || (height > STV_IMAGE_CIF_ROWS)) {
+ user_mode = CPIA2_VP_USER_MODE_VGA;
+ } else {
+ user_mode = CPIA2_VP_USER_MODE_QVGADS;
+ }
+ if (cam->params.pnp_id.device_type == DEVICE_STV_672)
+ frame_rate = CPIA2_VP_FRAMERATE_15;
+ else
+ frame_rate = CPIA2_VP_FRAMERATE_30;
+ break;
+ default:
+ LOG("%s: Invalid sensor flag value 0x%0X\n",__FUNCTION__,
+ cam->params.version.sensor_flags);
+ return -EINVAL;
+ }
+
+ DBG("Sensor flag = 0x%0x, user mode = 0x%0x, frame rate = 0x%X\n",
+ cam->params.version.sensor_flags, user_mode, frame_rate);
+ cpia2_do_command(cam, CPIA2_CMD_SET_USER_MODE, TRANSFER_WRITE,
+ user_mode);
+ if(cam->params.vp_params.frame_rate > 0 &&
+ frame_rate > cam->params.vp_params.frame_rate)
+ frame_rate = cam->params.vp_params.frame_rate;
+
+ cpia2_set_fps(cam, frame_rate);
+
+// if (cam->params.pnp_id.device_type == DEVICE_STV_676)
+// cpia2_do_command(cam,
+// CPIA2_CMD_SET_VP_SYSTEM_CTRL,
+// TRANSFER_WRITE,
+// CPIA2_VP_SYSTEMCTRL_HK_CONTROL |
+// CPIA2_VP_SYSTEMCTRL_POWER_CONTROL);
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * cpia2_match_video_size
+ *
+ * return the best match, where 'best' is as always
+ * the largest that is not bigger than what is requested.
+ *****************************************************************************/
+int cpia2_match_video_size(int width, int height)
+{
+ if (width >= STV_IMAGE_VGA_COLS && height >= STV_IMAGE_VGA_ROWS)
+ return VIDEOSIZE_VGA;
+
+ if (width >= STV_IMAGE_CIF_COLS && height >= STV_IMAGE_CIF_ROWS)
+ return VIDEOSIZE_CIF;
+
+ if (width >= STV_IMAGE_QVGA_COLS && height >= STV_IMAGE_QVGA_ROWS)
+ return VIDEOSIZE_QVGA;
+
+ if (width >= 288 && height >= 216)
+ return VIDEOSIZE_288_216;
+
+ if (width >= 256 && height >= 192)
+ return VIDEOSIZE_256_192;
+
+ if (width >= 224 && height >= 168)
+ return VIDEOSIZE_224_168;
+
+ if (width >= 192 && height >= 144)
+ return VIDEOSIZE_192_144;
+
+ if (width >= STV_IMAGE_QCIF_COLS && height >= STV_IMAGE_QCIF_ROWS)
+ return VIDEOSIZE_QCIF;
+
+ return -1;
+}
+
+/******************************************************************************
+ *
+ * SetVideoSize
+ *
+ *****************************************************************************/
+static int set_vw_size(struct camera_data *cam, int size)
+{
+ int retval = 0;
+
+ cam->params.vp_params.video_size = size;
+
+ switch (size) {
+ case VIDEOSIZE_VGA:
+ DBG("Setting size to VGA\n");
+ cam->params.roi.width = STV_IMAGE_VGA_COLS;
+ cam->params.roi.height = STV_IMAGE_VGA_ROWS;
+ cam->vw.width = STV_IMAGE_VGA_COLS;
+ cam->vw.height = STV_IMAGE_VGA_ROWS;
+ break;
+ case VIDEOSIZE_CIF:
+ DBG("Setting size to CIF\n");
+ cam->params.roi.width = STV_IMAGE_CIF_COLS;
+ cam->params.roi.height = STV_IMAGE_CIF_ROWS;
+ cam->vw.width = STV_IMAGE_CIF_COLS;
+ cam->vw.height = STV_IMAGE_CIF_ROWS;
+ break;
+ case VIDEOSIZE_QVGA:
+ DBG("Setting size to QVGA\n");
+ cam->params.roi.width = STV_IMAGE_QVGA_COLS;
+ cam->params.roi.height = STV_IMAGE_QVGA_ROWS;
+ cam->vw.width = STV_IMAGE_QVGA_COLS;
+ cam->vw.height = STV_IMAGE_QVGA_ROWS;
+ break;
+ case VIDEOSIZE_288_216:
+ cam->params.roi.width = 288;
+ cam->params.roi.height = 216;
+ cam->vw.width = 288;
+ cam->vw.height = 216;
+ break;
+ case VIDEOSIZE_256_192:
+ cam->vw.width = 256;
+ cam->vw.height = 192;
+ cam->params.roi.width = 256;
+ cam->params.roi.height = 192;
+ break;
+ case VIDEOSIZE_224_168:
+ cam->vw.width = 224;
+ cam->vw.height = 168;
+ cam->params.roi.width = 224;
+ cam->params.roi.height = 168;
+ break;
+ case VIDEOSIZE_192_144:
+ cam->vw.width = 192;
+ cam->vw.height = 144;
+ cam->params.roi.width = 192;
+ cam->params.roi.height = 144;
+ break;
+ case VIDEOSIZE_QCIF:
+ DBG("Setting size to QCIF\n");
+ cam->params.roi.width = STV_IMAGE_QCIF_COLS;
+ cam->params.roi.height = STV_IMAGE_QCIF_ROWS;
+ cam->vw.width = STV_IMAGE_QCIF_COLS;
+ cam->vw.height = STV_IMAGE_QCIF_ROWS;
+ break;
+ default:
+ retval = -EINVAL;
+ }
+ return retval;
+}
+
+/******************************************************************************
+ *
+ * configure_sensor
+ *
+ *****************************************************************************/
+static int configure_sensor(struct camera_data *cam,
+ int req_width, int req_height)
+{
+ int retval;
+
+ switch (cam->params.version.sensor_flags) {
+ case CPIA2_VP_SENSOR_FLAGS_404:
+ case CPIA2_VP_SENSOR_FLAGS_407:
+ case CPIA2_VP_SENSOR_FLAGS_409:
+ case CPIA2_VP_SENSOR_FLAGS_410:
+ retval = config_sensor_410(cam, req_width, req_height);
+ break;
+ case CPIA2_VP_SENSOR_FLAGS_500:
+ retval = config_sensor_500(cam, req_width, req_height);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return retval;
+}
+
+/******************************************************************************
+ *
+ * config_sensor_410
+ *
+ *****************************************************************************/
+static int config_sensor_410(struct camera_data *cam,
+ int req_width, int req_height)
+{
+ struct cpia2_command cmd;
+ int i = 0;
+ int image_size;
+ int image_type;
+ int width = req_width;
+ int height = req_height;
+
+ /***
+ * Make sure size doesn't exceed CIF.
+ ***/
+ if (width > STV_IMAGE_CIF_COLS)
+ width = STV_IMAGE_CIF_COLS;
+ if (height > STV_IMAGE_CIF_ROWS)
+ height = STV_IMAGE_CIF_ROWS;
+
+ image_size = cpia2_match_video_size(width, height);
+
+ DBG("Config 410: width = %d, height = %d\n", width, height);
+ DBG("Image size returned is %d\n", image_size);
+ if (image_size >= 0) {
+ set_vw_size(cam, image_size);
+ width = cam->params.roi.width;
+ height = cam->params.roi.height;
+
+ DBG("After set_vw_size(), width = %d, height = %d\n",
+ width, height);
+ if (width <= 176 && height <= 144) {
+ DBG("image type = VIDEOSIZE_QCIF\n");
+ image_type = VIDEOSIZE_QCIF;
+ }
+ else if (width <= 320 && height <= 240) {
+ DBG("image type = VIDEOSIZE_QVGA\n");
+ image_type = VIDEOSIZE_QVGA;
+ }
+ else {
+ DBG("image type = VIDEOSIZE_CIF\n");
+ image_type = VIDEOSIZE_CIF;
+ }
+ } else {
+ ERR("ConfigSensor410 failed\n");
+ return -EINVAL;
+ }
+
+ cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VC;
+ cmd.direction = TRANSFER_WRITE;
+
+ /* VC Format */
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_FORMAT;
+ if (image_type == VIDEOSIZE_CIF) {
+ cmd.buffer.registers[i++].value =
+ (u8) (CPIA2_VC_VC_FORMAT_UFIRST |
+ CPIA2_VC_VC_FORMAT_SHORTLINE);
+ } else {
+ cmd.buffer.registers[i++].value =
+ (u8) CPIA2_VC_VC_FORMAT_UFIRST;
+ }
+
+ /* VC Clocks */
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_CLOCKS;
+ if (image_type == VIDEOSIZE_QCIF) {
+ if (cam->params.pnp_id.device_type == DEVICE_STV_672) {
+ cmd.buffer.registers[i++].value=
+ (u8)(CPIA2_VC_VC_672_CLOCKS_CIF_DIV_BY_3 |
+ CPIA2_VC_VC_672_CLOCKS_SCALING |
+ CPIA2_VC_VC_CLOCKS_LOGDIV2);
+ DBG("VC_Clocks (0xc4) should be B\n");
+ }
+ else {
+ cmd.buffer.registers[i++].value=
+ (u8)(CPIA2_VC_VC_676_CLOCKS_CIF_DIV_BY_3 |
+ CPIA2_VC_VC_CLOCKS_LOGDIV2);
+ }
+ } else {
+ if (cam->params.pnp_id.device_type == DEVICE_STV_672) {
+ cmd.buffer.registers[i++].value =
+ (u8) (CPIA2_VC_VC_672_CLOCKS_CIF_DIV_BY_3 |
+ CPIA2_VC_VC_CLOCKS_LOGDIV0);
+ }
+ else {
+ cmd.buffer.registers[i++].value =
+ (u8) (CPIA2_VC_VC_676_CLOCKS_CIF_DIV_BY_3 |
+ CPIA2_VC_VC_676_CLOCKS_SCALING |
+ CPIA2_VC_VC_CLOCKS_LOGDIV0);
+ }
+ }
+ DBG("VC_Clocks (0xc4) = 0x%0X\n", cmd.buffer.registers[i-1].value);
+
+ /* Input reqWidth from VC */
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_IHSIZE_LO;
+ if (image_type == VIDEOSIZE_QCIF)
+ cmd.buffer.registers[i++].value =
+ (u8) (STV_IMAGE_QCIF_COLS / 4);
+ else
+ cmd.buffer.registers[i++].value =
+ (u8) (STV_IMAGE_CIF_COLS / 4);
+
+ /* Timings */
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_XLIM_HI;
+ if (image_type == VIDEOSIZE_QCIF)
+ cmd.buffer.registers[i++].value = (u8) 0;
+ else
+ cmd.buffer.registers[i++].value = (u8) 1;
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_XLIM_LO;
+ if (image_type == VIDEOSIZE_QCIF)
+ cmd.buffer.registers[i++].value = (u8) 208;
+ else
+ cmd.buffer.registers[i++].value = (u8) 160;
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_YLIM_HI;
+ if (image_type == VIDEOSIZE_QCIF)
+ cmd.buffer.registers[i++].value = (u8) 0;
+ else
+ cmd.buffer.registers[i++].value = (u8) 1;
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_YLIM_LO;
+ if (image_type == VIDEOSIZE_QCIF)
+ cmd.buffer.registers[i++].value = (u8) 160;
+ else
+ cmd.buffer.registers[i++].value = (u8) 64;
+
+ /* Output Image Size */
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_OHSIZE;
+ cmd.buffer.registers[i++].value = cam->params.roi.width / 4;
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_OVSIZE;
+ cmd.buffer.registers[i++].value = cam->params.roi.height / 4;
+
+ /* Cropping */
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_HCROP;
+ if (image_type == VIDEOSIZE_QCIF)
+ cmd.buffer.registers[i++].value =
+ (u8) (((STV_IMAGE_QCIF_COLS / 4) - (width / 4)) / 2);
+ else
+ cmd.buffer.registers[i++].value =
+ (u8) (((STV_IMAGE_CIF_COLS / 4) - (width / 4)) / 2);
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_VCROP;
+ if (image_type == VIDEOSIZE_QCIF)
+ cmd.buffer.registers[i++].value =
+ (u8) (((STV_IMAGE_QCIF_ROWS / 4) - (height / 4)) / 2);
+ else
+ cmd.buffer.registers[i++].value =
+ (u8) (((STV_IMAGE_CIF_ROWS / 4) - (height / 4)) / 2);
+
+ /* Scaling registers (defaults) */
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_HPHASE;
+ cmd.buffer.registers[i++].value = (u8) 0;
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_VPHASE;
+ cmd.buffer.registers[i++].value = (u8) 0;
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_HISPAN;
+ cmd.buffer.registers[i++].value = (u8) 31;
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_VISPAN;
+ cmd.buffer.registers[i++].value = (u8) 31;
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_HICROP;
+ cmd.buffer.registers[i++].value = (u8) 0;
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_VICROP;
+ cmd.buffer.registers[i++].value = (u8) 0;
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_HFRACT;
+ cmd.buffer.registers[i++].value = (u8) 0x81; /* = 8/1 = 8 (HIBYTE/LOBYTE) */
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_VFRACT;
+ cmd.buffer.registers[i++].value = (u8) 0x81; /* = 8/1 = 8 (HIBYTE/LOBYTE) */
+
+ cmd.reg_count = i;
+
+ cpia2_send_command(cam, &cmd);
+
+ return i;
+}
+
+
+/******************************************************************************
+ *
+ * config_sensor_500(cam)
+ *
+ *****************************************************************************/
+static int config_sensor_500(struct camera_data *cam,
+ int req_width, int req_height)
+{
+ struct cpia2_command cmd;
+ int i = 0;
+ int image_size = VIDEOSIZE_CIF;
+ int image_type = VIDEOSIZE_VGA;
+ int width = req_width;
+ int height = req_height;
+ unsigned int device = cam->params.pnp_id.device_type;
+
+ image_size = cpia2_match_video_size(width, height);
+
+ if (width > STV_IMAGE_CIF_COLS || height > STV_IMAGE_CIF_ROWS)
+ image_type = VIDEOSIZE_VGA;
+ else if (width > STV_IMAGE_QVGA_COLS || height > STV_IMAGE_QVGA_ROWS)
+ image_type = VIDEOSIZE_CIF;
+ else if (width > STV_IMAGE_QCIF_COLS || height > STV_IMAGE_QCIF_ROWS)
+ image_type = VIDEOSIZE_QVGA;
+ else
+ image_type = VIDEOSIZE_QCIF;
+
+ if (image_size >= 0) {
+ set_vw_size(cam, image_size);
+ width = cam->params.roi.width;
+ height = cam->params.roi.height;
+ } else {
+ ERR("ConfigSensor500 failed\n");
+ return -EINVAL;
+ }
+
+ DBG("image_size = %d, width = %d, height = %d, type = %d\n",
+ image_size, width, height, image_type);
+
+ cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VC;
+ cmd.direction = TRANSFER_WRITE;
+ i = 0;
+
+ /* VC Format */
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_FORMAT;
+ cmd.buffer.registers[i].value = (u8) CPIA2_VC_VC_FORMAT_UFIRST;
+ if (image_type == VIDEOSIZE_QCIF)
+ cmd.buffer.registers[i].value |= (u8) CPIA2_VC_VC_FORMAT_DECIMATING;
+ i++;
+
+ /* VC Clocks */
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_CLOCKS;
+ if (device == DEVICE_STV_672) {
+ if (image_type == VIDEOSIZE_VGA)
+ cmd.buffer.registers[i].value =
+ (u8)CPIA2_VC_VC_CLOCKS_LOGDIV1;
+ else
+ cmd.buffer.registers[i].value =
+ (u8)(CPIA2_VC_VC_672_CLOCKS_SCALING |
+ CPIA2_VC_VC_CLOCKS_LOGDIV3);
+ } else {
+ if (image_type == VIDEOSIZE_VGA)
+ cmd.buffer.registers[i].value =
+ (u8)CPIA2_VC_VC_CLOCKS_LOGDIV0;
+ else
+ cmd.buffer.registers[i].value =
+ (u8)(CPIA2_VC_VC_676_CLOCKS_SCALING |
+ CPIA2_VC_VC_CLOCKS_LOGDIV2);
+ }
+ i++;
+
+ DBG("VC_CLOCKS = 0x%X\n", cmd.buffer.registers[i-1].value);
+
+ /* Input width from VP */
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_IHSIZE_LO;
+ if (image_type == VIDEOSIZE_VGA)
+ cmd.buffer.registers[i].value =
+ (u8) (STV_IMAGE_VGA_COLS / 4);
+ else
+ cmd.buffer.registers[i].value =
+ (u8) (STV_IMAGE_QVGA_COLS / 4);
+ i++;
+ DBG("Input width = %d\n", cmd.buffer.registers[i-1].value);
+
+ /* Timings */
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_XLIM_HI;
+ if (image_type == VIDEOSIZE_VGA)
+ cmd.buffer.registers[i++].value = (u8) 2;
+ else
+ cmd.buffer.registers[i++].value = (u8) 1;
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_XLIM_LO;
+ if (image_type == VIDEOSIZE_VGA)
+ cmd.buffer.registers[i++].value = (u8) 250;
+ else if (image_type == VIDEOSIZE_QVGA)
+ cmd.buffer.registers[i++].value = (u8) 125;
+ else
+ cmd.buffer.registers[i++].value = (u8) 160;
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_YLIM_HI;
+ if (image_type == VIDEOSIZE_VGA)
+ cmd.buffer.registers[i++].value = (u8) 2;
+ else
+ cmd.buffer.registers[i++].value = (u8) 1;
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_YLIM_LO;
+ if (image_type == VIDEOSIZE_VGA)
+ cmd.buffer.registers[i++].value = (u8) 12;
+ else if (image_type == VIDEOSIZE_QVGA)
+ cmd.buffer.registers[i++].value = (u8) 64;
+ else
+ cmd.buffer.registers[i++].value = (u8) 6;
+
+ /* Output Image Size */
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_OHSIZE;
+ if (image_type == VIDEOSIZE_QCIF)
+ cmd.buffer.registers[i++].value = STV_IMAGE_CIF_COLS / 4;
+ else
+ cmd.buffer.registers[i++].value = width / 4;
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_OVSIZE;
+ if (image_type == VIDEOSIZE_QCIF)
+ cmd.buffer.registers[i++].value = STV_IMAGE_CIF_ROWS / 4;
+ else
+ cmd.buffer.registers[i++].value = height / 4;
+
+ /* Cropping */
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_HCROP;
+ if (image_type == VIDEOSIZE_VGA)
+ cmd.buffer.registers[i++].value =
+ (u8) (((STV_IMAGE_VGA_COLS / 4) - (width / 4)) / 2);
+ else if (image_type == VIDEOSIZE_QVGA)
+ cmd.buffer.registers[i++].value =
+ (u8) (((STV_IMAGE_QVGA_COLS / 4) - (width / 4)) / 2);
+ else if (image_type == VIDEOSIZE_CIF)
+ cmd.buffer.registers[i++].value =
+ (u8) (((STV_IMAGE_CIF_COLS / 4) - (width / 4)) / 2);
+ else /*if (image_type == VIDEOSIZE_QCIF)*/
+ cmd.buffer.registers[i++].value =
+ (u8) (((STV_IMAGE_QCIF_COLS / 4) - (width / 4)) / 2);
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_VCROP;
+ if (image_type == VIDEOSIZE_VGA)
+ cmd.buffer.registers[i++].value =
+ (u8) (((STV_IMAGE_VGA_ROWS / 4) - (height / 4)) / 2);
+ else if (image_type == VIDEOSIZE_QVGA)
+ cmd.buffer.registers[i++].value =
+ (u8) (((STV_IMAGE_QVGA_ROWS / 4) - (height / 4)) / 2);
+ else if (image_type == VIDEOSIZE_CIF)
+ cmd.buffer.registers[i++].value =
+ (u8) (((STV_IMAGE_CIF_ROWS / 4) - (height / 4)) / 2);
+ else /*if (image_type == VIDEOSIZE_QCIF)*/
+ cmd.buffer.registers[i++].value =
+ (u8) (((STV_IMAGE_QCIF_ROWS / 4) - (height / 4)) / 2);
+
+ /* Scaling registers (defaults) */
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_HPHASE;
+ if (image_type == VIDEOSIZE_CIF || image_type == VIDEOSIZE_QCIF)
+ cmd.buffer.registers[i++].value = (u8) 36;
+ else
+ cmd.buffer.registers[i++].value = (u8) 0;
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_VPHASE;
+ if (image_type == VIDEOSIZE_CIF || image_type == VIDEOSIZE_QCIF)
+ cmd.buffer.registers[i++].value = (u8) 32;
+ else
+ cmd.buffer.registers[i++].value = (u8) 0;
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_HISPAN;
+ if (image_type == VIDEOSIZE_CIF || image_type == VIDEOSIZE_QCIF)
+ cmd.buffer.registers[i++].value = (u8) 26;
+ else
+ cmd.buffer.registers[i++].value = (u8) 31;
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_VISPAN;
+ if (image_type == VIDEOSIZE_CIF || image_type == VIDEOSIZE_QCIF)
+ cmd.buffer.registers[i++].value = (u8) 21;
+ else
+ cmd.buffer.registers[i++].value = (u8) 31;
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_HICROP;
+ cmd.buffer.registers[i++].value = (u8) 0;
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_VICROP;
+ cmd.buffer.registers[i++].value = (u8) 0;
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_HFRACT;
+ if (image_type == VIDEOSIZE_CIF || image_type == VIDEOSIZE_QCIF)
+ cmd.buffer.registers[i++].value = (u8) 0x2B; /* 2/11 */
+ else
+ cmd.buffer.registers[i++].value = (u8) 0x81; /* 8/1 */
+
+ cmd.buffer.registers[i].index = CPIA2_VC_VC_VFRACT;
+ if (image_type == VIDEOSIZE_CIF || image_type == VIDEOSIZE_QCIF)
+ cmd.buffer.registers[i++].value = (u8) 0x13; /* 1/3 */
+ else
+ cmd.buffer.registers[i++].value = (u8) 0x81; /* 8/1 */
+
+ cmd.reg_count = i;
+
+ cpia2_send_command(cam, &cmd);
+
+ return i;
+}
+
+
+/******************************************************************************
+ *
+ * setallproperties
+ *
+ * This sets all user changeable properties to the values in cam->params.
+ *****************************************************************************/
+int set_all_properties(struct camera_data *cam)
+{
+ /**
+ * Don't set target_kb here, it will be set later.
+ * framerate and user_mode were already set (set_default_user_mode).
+ **/
+
+ cpia2_set_color_params(cam);
+
+ cpia2_usb_change_streaming_alternate(cam,
+ cam->params.camera_state.stream_mode);
+
+ cpia2_do_command(cam, CPIA2_CMD_SET_USER_EFFECTS, TRANSFER_WRITE,
+ cam->params.vp_params.user_effects);
+
+ cpia2_set_flicker_mode(cam,
+ cam->params.flicker_control.flicker_mode_req);
+
+ cpia2_do_command(cam,
+ CPIA2_CMD_SET_VC_MP_GPIO_DIRECTION,
+ TRANSFER_WRITE, cam->params.vp_params.gpio_direction);
+ cpia2_do_command(cam, CPIA2_CMD_SET_VC_MP_GPIO_DATA, TRANSFER_WRITE,
+ cam->params.vp_params.gpio_data);
+
+ wake_system(cam);
+
+ set_lowlight_boost(cam);
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * cpia2_save_camera_state
+ *
+ *****************************************************************************/
+void cpia2_save_camera_state(struct camera_data *cam)
+{
+ get_color_params(cam);
+ cpia2_do_command(cam, CPIA2_CMD_GET_USER_EFFECTS, TRANSFER_READ, 0);
+ cpia2_do_command(cam, CPIA2_CMD_GET_VC_MP_GPIO_DIRECTION, TRANSFER_READ,
+ 0);
+ cpia2_do_command(cam, CPIA2_CMD_GET_VC_MP_GPIO_DATA, TRANSFER_READ, 0);
+ /* Don't get framerate or target_kb. Trust the values we already have */
+}
+
+/******************************************************************************
+ *
+ * get_color_params
+ *
+ *****************************************************************************/
+void get_color_params(struct camera_data *cam)
+{
+ cpia2_do_command(cam, CPIA2_CMD_GET_VP_BRIGHTNESS, TRANSFER_READ, 0);
+ cpia2_do_command(cam, CPIA2_CMD_GET_VP_SATURATION, TRANSFER_READ, 0);
+ cpia2_do_command(cam, CPIA2_CMD_GET_CONTRAST, TRANSFER_READ, 0);
+}
+
+/******************************************************************************
+ *
+ * cpia2_set_color_params
+ *
+ *****************************************************************************/
+void cpia2_set_color_params(struct camera_data *cam)
+{
+ DBG("Setting color params\n");
+ cpia2_set_brightness(cam, cam->params.color_params.brightness);
+ cpia2_set_contrast(cam, cam->params.color_params.contrast);
+ cpia2_set_saturation(cam, cam->params.color_params.saturation);
+}
+
+/******************************************************************************
+ *
+ * cpia2_set_flicker_mode
+ *
+ *****************************************************************************/
+int cpia2_set_flicker_mode(struct camera_data *cam, int mode)
+{
+ unsigned char cam_reg;
+ int err = 0;
+
+ if(cam->params.pnp_id.device_type != DEVICE_STV_672)
+ return -EINVAL;
+
+ /* Set the appropriate bits in FLICKER_MODES, preserving the rest */
+ if((err = cpia2_do_command(cam, CPIA2_CMD_GET_FLICKER_MODES,
+ TRANSFER_READ, 0)))
+ return err;
+ cam_reg = cam->params.flicker_control.cam_register;
+
+ switch(mode) {
+ case NEVER_FLICKER:
+ cam_reg |= CPIA2_VP_FLICKER_MODES_NEVER_FLICKER;
+ cam_reg &= ~CPIA2_VP_FLICKER_MODES_50HZ;
+ break;
+ case FLICKER_60:
+ cam_reg &= ~CPIA2_VP_FLICKER_MODES_NEVER_FLICKER;
+ cam_reg &= ~CPIA2_VP_FLICKER_MODES_50HZ;
+ break;
+ case FLICKER_50:
+ cam_reg &= ~CPIA2_VP_FLICKER_MODES_NEVER_FLICKER;
+ cam_reg |= CPIA2_VP_FLICKER_MODES_50HZ;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if((err = cpia2_do_command(cam, CPIA2_CMD_SET_FLICKER_MODES,
+ TRANSFER_WRITE, cam_reg)))
+ return err;
+
+ /* Set the appropriate bits in EXP_MODES, preserving the rest */
+ if((err = cpia2_do_command(cam, CPIA2_CMD_GET_VP_EXP_MODES,
+ TRANSFER_READ, 0)))
+ return err;
+ cam_reg = cam->params.vp_params.exposure_modes;
+
+ if (mode == NEVER_FLICKER) {
+ cam_reg |= CPIA2_VP_EXPOSURE_MODES_INHIBIT_FLICKER;
+ } else {
+ cam_reg &= ~CPIA2_VP_EXPOSURE_MODES_INHIBIT_FLICKER;
+ }
+
+ if((err = cpia2_do_command(cam, CPIA2_CMD_SET_VP_EXP_MODES,
+ TRANSFER_WRITE, cam_reg)))
+ return err;
+
+ if((err = cpia2_do_command(cam, CPIA2_CMD_REHASH_VP4,
+ TRANSFER_WRITE, 1)))
+ return err;
+
+ switch(mode) {
+ case NEVER_FLICKER:
+ cam->params.flicker_control.flicker_mode_req = mode;
+ break;
+ case FLICKER_60:
+ cam->params.flicker_control.flicker_mode_req = mode;
+ cam->params.flicker_control.mains_frequency = 60;
+ break;
+ case FLICKER_50:
+ cam->params.flicker_control.flicker_mode_req = mode;
+ cam->params.flicker_control.mains_frequency = 50;
+ break;
+ default:
+ err = -EINVAL;
+ }
+
+ return err;
+}
+
+/******************************************************************************
+ *
+ * cpia2_set_property_flip
+ *
+ *****************************************************************************/
+void cpia2_set_property_flip(struct camera_data *cam, int prop_val)
+{
+ unsigned char cam_reg;
+
+ cpia2_do_command(cam, CPIA2_CMD_GET_USER_EFFECTS, TRANSFER_READ, 0);
+ cam_reg = cam->params.vp_params.user_effects;
+
+ if (prop_val)
+ {
+ cam_reg |= CPIA2_VP_USER_EFFECTS_FLIP;
+ }
+ else
+ {
+ cam_reg &= ~CPIA2_VP_USER_EFFECTS_FLIP;
+ }
+ cpia2_do_command(cam, CPIA2_CMD_SET_USER_EFFECTS, TRANSFER_WRITE,
+ cam_reg);
+}
+
+/******************************************************************************
+ *
+ * cpia2_set_property_mirror
+ *
+ *****************************************************************************/
+void cpia2_set_property_mirror(struct camera_data *cam, int prop_val)
+{
+ unsigned char cam_reg;
+
+ cpia2_do_command(cam, CPIA2_CMD_GET_USER_EFFECTS, TRANSFER_READ, 0);
+ cam_reg = cam->params.vp_params.user_effects;
+
+ if (prop_val)
+ {
+ cam_reg |= CPIA2_VP_USER_EFFECTS_MIRROR;
+ }
+ else
+ {
+ cam_reg &= ~CPIA2_VP_USER_EFFECTS_MIRROR;
+ }
+ cpia2_do_command(cam, CPIA2_CMD_SET_USER_EFFECTS, TRANSFER_WRITE,
+ cam_reg);
+}
+
+/******************************************************************************
+ *
+ * set_target_kb
+ *
+ * The new Target KB is set in cam->params.vc_params.target_kb and
+ * activates on reset.
+ *****************************************************************************/
+
+int cpia2_set_target_kb(struct camera_data *cam, unsigned char value)
+{
+ DBG("Requested target_kb = %d\n", value);
+ if (value != cam->params.vc_params.target_kb) {
+
+ cpia2_usb_stream_pause(cam);
+
+ /* reset camera for new target_kb */
+ cam->params.vc_params.target_kb = value;
+ cpia2_reset_camera(cam);
+
+ cpia2_usb_stream_resume(cam);
+ }
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * cpia2_set_gpio
+ *
+ *****************************************************************************/
+int cpia2_set_gpio(struct camera_data *cam, unsigned char setting)
+{
+ int ret;
+
+ /* Set the microport direction (register 0x90, should be defined
+ * already) to 1 (user output), and set the microport data (0x91) to
+ * the value in the ioctl argument.
+ */
+
+ ret = cpia2_do_command(cam,
+ CPIA2_CMD_SET_VC_MP_GPIO_DIRECTION,
+ CPIA2_VC_MP_DIR_OUTPUT,
+ 255);
+ if (ret < 0)
+ return ret;
+ cam->params.vp_params.gpio_direction = 255;
+
+ ret = cpia2_do_command(cam,
+ CPIA2_CMD_SET_VC_MP_GPIO_DATA,
+ CPIA2_VC_MP_DIR_OUTPUT,
+ setting);
+ if (ret < 0)
+ return ret;
+ cam->params.vp_params.gpio_data = setting;
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * cpia2_set_fps
+ *
+ *****************************************************************************/
+int cpia2_set_fps(struct camera_data *cam, int framerate)
+{
+ int retval;
+
+ switch(framerate) {
+ case CPIA2_VP_FRAMERATE_30:
+ case CPIA2_VP_FRAMERATE_25:
+ if(cam->params.pnp_id.device_type == DEVICE_STV_672 &&
+ cam->params.version.sensor_flags ==
+ CPIA2_VP_SENSOR_FLAGS_500) {
+ return -EINVAL;
+ }
+ /* Fall through */
+ case CPIA2_VP_FRAMERATE_15:
+ case CPIA2_VP_FRAMERATE_12_5:
+ case CPIA2_VP_FRAMERATE_7_5:
+ case CPIA2_VP_FRAMERATE_6_25:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (cam->params.pnp_id.device_type == DEVICE_STV_672 &&
+ framerate == CPIA2_VP_FRAMERATE_15)
+ framerate = 0; /* Work around bug in VP4 */
+
+ retval = cpia2_do_command(cam,
+ CPIA2_CMD_FRAMERATE_REQ,
+ TRANSFER_WRITE,
+ framerate);
+
+ if(retval == 0)
+ cam->params.vp_params.frame_rate = framerate;
+
+ return retval;
+}
+
+/******************************************************************************
+ *
+ * cpia2_set_brightness
+ *
+ *****************************************************************************/
+void cpia2_set_brightness(struct camera_data *cam, unsigned char value)
+{
+ /***
+ * Don't let the register be set to zero - bug in VP4 - flash of full
+ * brightness
+ ***/
+ if (cam->params.pnp_id.device_type == DEVICE_STV_672 && value == 0)
+ value++;
+ DBG("Setting brightness to %d (0x%0x)\n", value, value);
+ cpia2_do_command(cam,CPIA2_CMD_SET_VP_BRIGHTNESS, TRANSFER_WRITE,value);
+}
+
+/******************************************************************************
+ *
+ * cpia2_set_contrast
+ *
+ *****************************************************************************/
+void cpia2_set_contrast(struct camera_data *cam, unsigned char value)
+{
+ DBG("Setting contrast to %d (0x%0x)\n", value, value);
+ cam->params.color_params.contrast = value;
+ cpia2_do_command(cam, CPIA2_CMD_SET_CONTRAST, TRANSFER_WRITE, value);
+}
+
+/******************************************************************************
+ *
+ * cpia2_set_saturation
+ *
+ *****************************************************************************/
+void cpia2_set_saturation(struct camera_data *cam, unsigned char value)
+{
+ DBG("Setting saturation to %d (0x%0x)\n", value, value);
+ cam->params.color_params.saturation = value;
+ cpia2_do_command(cam,CPIA2_CMD_SET_VP_SATURATION, TRANSFER_WRITE,value);
+}
+
+/******************************************************************************
+ *
+ * wake_system
+ *
+ *****************************************************************************/
+void wake_system(struct camera_data *cam)
+{
+ cpia2_do_command(cam, CPIA2_CMD_SET_WAKEUP, TRANSFER_WRITE, 0);
+}
+
+/******************************************************************************
+ *
+ * set_lowlight_boost
+ *
+ * Valid for STV500 sensor only
+ *****************************************************************************/
+void set_lowlight_boost(struct camera_data *cam)
+{
+ struct cpia2_command cmd;
+
+ if (cam->params.pnp_id.device_type != DEVICE_STV_672 ||
+ cam->params.version.sensor_flags != CPIA2_VP_SENSOR_FLAGS_500)
+ return;
+
+ cmd.direction = TRANSFER_WRITE;
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
+ cmd.reg_count = 3;
+ cmd.start = CPIA2_VP_RAM_ADDR_H;
+
+ cmd.buffer.block_data[0] = 0; /* High byte of address to write to */
+ cmd.buffer.block_data[1] = 0x59; /* Low byte of address to write to */
+ cmd.buffer.block_data[2] = 0; /* High byte of data to write */
+
+ cpia2_send_command(cam, &cmd);
+
+ if (cam->params.vp_params.lowlight_boost) {
+ cmd.buffer.block_data[0] = 0x02; /* Low byte data to write */
+ } else {
+ cmd.buffer.block_data[0] = 0x06;
+ }
+ cmd.start = CPIA2_VP_RAM_DATA;
+ cmd.reg_count = 1;
+ cpia2_send_command(cam, &cmd);
+
+ /* Rehash the VP4 values */
+ cpia2_do_command(cam, CPIA2_CMD_REHASH_VP4, TRANSFER_WRITE, 1);
+}
+
+/******************************************************************************
+ *
+ * cpia2_set_format
+ *
+ * Assumes that new size is already set in param struct.
+ *****************************************************************************/
+void cpia2_set_format(struct camera_data *cam)
+{
+ cam->flush = true;
+
+ cpia2_usb_stream_pause(cam);
+
+ /* reset camera to new size */
+ cpia2_set_low_power(cam);
+ cpia2_reset_camera(cam);
+ cam->flush = false;
+
+ cpia2_dbg_dump_registers(cam);
+
+ cpia2_usb_stream_resume(cam);
+}
+
+/******************************************************************************
+ *
+ * cpia2_dbg_dump_registers
+ *
+ *****************************************************************************/
+void cpia2_dbg_dump_registers(struct camera_data *cam)
+{
+#ifdef _CPIA2_DEBUG_
+ struct cpia2_command cmd;
+
+ if (!(debugs_on & DEBUG_DUMP_REGS))
+ return;
+
+ cmd.direction = TRANSFER_READ;
+
+ /* Start with bank 0 (SYSTEM) */
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM;
+ cmd.reg_count = 3;
+ cmd.start = 0;
+ cpia2_send_command(cam, &cmd);
+ printk(KERN_DEBUG "System Device Hi = 0x%X\n",
+ cmd.buffer.block_data[0]);
+ printk(KERN_DEBUG "System Device Lo = 0x%X\n",
+ cmd.buffer.block_data[1]);
+ printk(KERN_DEBUG "System_system control = 0x%X\n",
+ cmd.buffer.block_data[2]);
+
+ /* Bank 1 (VC) */
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC;
+ cmd.reg_count = 4;
+ cmd.start = 0x80;
+ cpia2_send_command(cam, &cmd);
+ printk(KERN_DEBUG "ASIC_ID = 0x%X\n",
+ cmd.buffer.block_data[0]);
+ printk(KERN_DEBUG "ASIC_REV = 0x%X\n",
+ cmd.buffer.block_data[1]);
+ printk(KERN_DEBUG "PW_CONTRL = 0x%X\n",
+ cmd.buffer.block_data[2]);
+ printk(KERN_DEBUG "WAKEUP = 0x%X\n",
+ cmd.buffer.block_data[3]);
+
+ cmd.start = 0xA0; /* ST_CTRL */
+ cmd.reg_count = 1;
+ cpia2_send_command(cam, &cmd);
+ printk(KERN_DEBUG "Stream ctrl = 0x%X\n",
+ cmd.buffer.block_data[0]);
+
+ cmd.start = 0xA4; /* Stream status */
+ cpia2_send_command(cam, &cmd);
+ printk(KERN_DEBUG "Stream status = 0x%X\n",
+ cmd.buffer.block_data[0]);
+
+ cmd.start = 0xA8; /* USB status */
+ cmd.reg_count = 3;
+ cpia2_send_command(cam, &cmd);
+ printk(KERN_DEBUG "USB_CTRL = 0x%X\n",
+ cmd.buffer.block_data[0]);
+ printk(KERN_DEBUG "USB_STRM = 0x%X\n",
+ cmd.buffer.block_data[1]);
+ printk(KERN_DEBUG "USB_STATUS = 0x%X\n",
+ cmd.buffer.block_data[2]);
+
+ cmd.start = 0xAF; /* USB settings */
+ cmd.reg_count = 1;
+ cpia2_send_command(cam, &cmd);
+ printk(KERN_DEBUG "USB settings = 0x%X\n",
+ cmd.buffer.block_data[0]);
+
+ cmd.start = 0xC0; /* VC stuff */
+ cmd.reg_count = 26;
+ cpia2_send_command(cam, &cmd);
+ printk(KERN_DEBUG "VC Control = 0x%0X\n",
+ cmd.buffer.block_data[0]);
+ printk(KERN_DEBUG "VC Format = 0x%0X\n",
+ cmd.buffer.block_data[3]);
+ printk(KERN_DEBUG "VC Clocks = 0x%0X\n",
+ cmd.buffer.block_data[4]);
+ printk(KERN_DEBUG "VC IHSize = 0x%0X\n",
+ cmd.buffer.block_data[5]);
+ printk(KERN_DEBUG "VC Xlim Hi = 0x%0X\n",
+ cmd.buffer.block_data[6]);
+ printk(KERN_DEBUG "VC XLim Lo = 0x%0X\n",
+ cmd.buffer.block_data[7]);
+ printk(KERN_DEBUG "VC YLim Hi = 0x%0X\n",
+ cmd.buffer.block_data[8]);
+ printk(KERN_DEBUG "VC YLim Lo = 0x%0X\n",
+ cmd.buffer.block_data[9]);
+ printk(KERN_DEBUG "VC OHSize = 0x%0X\n",
+ cmd.buffer.block_data[10]);
+ printk(KERN_DEBUG "VC OVSize = 0x%0X\n",
+ cmd.buffer.block_data[11]);
+ printk(KERN_DEBUG "VC HCrop = 0x%0X\n",
+ cmd.buffer.block_data[12]);
+ printk(KERN_DEBUG "VC VCrop = 0x%0X\n",
+ cmd.buffer.block_data[13]);
+ printk(KERN_DEBUG "VC HPhase = 0x%0X\n",
+ cmd.buffer.block_data[14]);
+ printk(KERN_DEBUG "VC VPhase = 0x%0X\n",
+ cmd.buffer.block_data[15]);
+ printk(KERN_DEBUG "VC HIspan = 0x%0X\n",
+ cmd.buffer.block_data[16]);
+ printk(KERN_DEBUG "VC VIspan = 0x%0X\n",
+ cmd.buffer.block_data[17]);
+ printk(KERN_DEBUG "VC HiCrop = 0x%0X\n",
+ cmd.buffer.block_data[18]);
+ printk(KERN_DEBUG "VC ViCrop = 0x%0X\n",
+ cmd.buffer.block_data[19]);
+ printk(KERN_DEBUG "VC HiFract = 0x%0X\n",
+ cmd.buffer.block_data[20]);
+ printk(KERN_DEBUG "VC ViFract = 0x%0X\n",
+ cmd.buffer.block_data[21]);
+ printk(KERN_DEBUG "VC JPeg Opt = 0x%0X\n",
+ cmd.buffer.block_data[22]);
+ printk(KERN_DEBUG "VC Creep Per = 0x%0X\n",
+ cmd.buffer.block_data[23]);
+ printk(KERN_DEBUG "VC User Sq. = 0x%0X\n",
+ cmd.buffer.block_data[24]);
+ printk(KERN_DEBUG "VC Target KB = 0x%0X\n",
+ cmd.buffer.block_data[25]);
+
+ /*** VP ***/
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP;
+ cmd.reg_count = 14;
+ cmd.start = 0;
+ cpia2_send_command(cam, &cmd);
+
+ printk(KERN_DEBUG "VP Dev Hi = 0x%0X\n",
+ cmd.buffer.block_data[0]);
+ printk(KERN_DEBUG "VP Dev Lo = 0x%0X\n",
+ cmd.buffer.block_data[1]);
+ printk(KERN_DEBUG "VP Sys State = 0x%0X\n",
+ cmd.buffer.block_data[2]);
+ printk(KERN_DEBUG "VP Sys Ctrl = 0x%0X\n",
+ cmd.buffer.block_data[3]);
+ printk(KERN_DEBUG "VP Sensor flg = 0x%0X\n",
+ cmd.buffer.block_data[5]);
+ printk(KERN_DEBUG "VP Sensor Rev = 0x%0X\n",
+ cmd.buffer.block_data[6]);
+ printk(KERN_DEBUG "VP Dev Config = 0x%0X\n",
+ cmd.buffer.block_data[7]);
+ printk(KERN_DEBUG "VP GPIO_DIR = 0x%0X\n",
+ cmd.buffer.block_data[8]);
+ printk(KERN_DEBUG "VP GPIO_DATA = 0x%0X\n",
+ cmd.buffer.block_data[9]);
+ printk(KERN_DEBUG "VP Ram ADDR H = 0x%0X\n",
+ cmd.buffer.block_data[10]);
+ printk(KERN_DEBUG "VP Ram ADDR L = 0x%0X\n",
+ cmd.buffer.block_data[11]);
+ printk(KERN_DEBUG "VP RAM Data = 0x%0X\n",
+ cmd.buffer.block_data[12]);
+ printk(KERN_DEBUG "Do Call = 0x%0X\n",
+ cmd.buffer.block_data[13]);
+
+ if (cam->params.pnp_id.device_type == DEVICE_STV_672) {
+ cmd.reg_count = 9;
+ cmd.start = 0x0E;
+ cpia2_send_command(cam, &cmd);
+ printk(KERN_DEBUG "VP Clock Ctrl = 0x%0X\n",
+ cmd.buffer.block_data[0]);
+ printk(KERN_DEBUG "VP Patch Rev = 0x%0X\n",
+ cmd.buffer.block_data[1]);
+ printk(KERN_DEBUG "VP Vid Mode = 0x%0X\n",
+ cmd.buffer.block_data[2]);
+ printk(KERN_DEBUG "VP Framerate = 0x%0X\n",
+ cmd.buffer.block_data[3]);
+ printk(KERN_DEBUG "VP UserEffect = 0x%0X\n",
+ cmd.buffer.block_data[4]);
+ printk(KERN_DEBUG "VP White Bal = 0x%0X\n",
+ cmd.buffer.block_data[5]);
+ printk(KERN_DEBUG "VP WB thresh = 0x%0X\n",
+ cmd.buffer.block_data[6]);
+ printk(KERN_DEBUG "VP Exp Modes = 0x%0X\n",
+ cmd.buffer.block_data[7]);
+ printk(KERN_DEBUG "VP Exp Target = 0x%0X\n",
+ cmd.buffer.block_data[8]);
+
+ cmd.reg_count = 1;
+ cmd.start = 0x1B;
+ cpia2_send_command(cam, &cmd);
+ printk(KERN_DEBUG "VP FlickerMds = 0x%0X\n",
+ cmd.buffer.block_data[0]);
+ } else {
+ cmd.reg_count = 8 ;
+ cmd.start = 0x0E;
+ cpia2_send_command(cam, &cmd);
+ printk(KERN_DEBUG "VP Clock Ctrl = 0x%0X\n",
+ cmd.buffer.block_data[0]);
+ printk(KERN_DEBUG "VP Patch Rev = 0x%0X\n",
+ cmd.buffer.block_data[1]);
+ printk(KERN_DEBUG "VP Vid Mode = 0x%0X\n",
+ cmd.buffer.block_data[5]);
+ printk(KERN_DEBUG "VP Framerate = 0x%0X\n",
+ cmd.buffer.block_data[6]);
+ printk(KERN_DEBUG "VP UserEffect = 0x%0X\n",
+ cmd.buffer.block_data[7]);
+
+ cmd.reg_count = 1;
+ cmd.start = CPIA2_VP5_EXPOSURE_TARGET;
+ cpia2_send_command(cam, &cmd);
+ printk(KERN_DEBUG "VP5 Exp Target= 0x%0X\n",
+ cmd.buffer.block_data[0]);
+
+ cmd.reg_count = 4;
+ cmd.start = 0x3A;
+ cpia2_send_command(cam, &cmd);
+ printk(KERN_DEBUG "VP5 MY Black = 0x%0X\n",
+ cmd.buffer.block_data[0]);
+ printk(KERN_DEBUG "VP5 MCY Range = 0x%0X\n",
+ cmd.buffer.block_data[1]);
+ printk(KERN_DEBUG "VP5 MYCEILING = 0x%0X\n",
+ cmd.buffer.block_data[2]);
+ printk(KERN_DEBUG "VP5 MCUV Sat = 0x%0X\n",
+ cmd.buffer.block_data[3]);
+ }
+#endif
+}
+
+/******************************************************************************
+ *
+ * reset_camera_struct
+ *
+ * Sets all values to the defaults
+ *****************************************************************************/
+void reset_camera_struct(struct camera_data *cam)
+{
+ /***
+ * The following parameter values are the defaults from the register map.
+ ***/
+ cam->params.color_params.brightness = DEFAULT_BRIGHTNESS;
+ cam->params.color_params.contrast = DEFAULT_CONTRAST;
+ cam->params.color_params.saturation = DEFAULT_SATURATION;
+ cam->params.vp_params.lowlight_boost = 0;
+
+ /* FlickerModes */
+ cam->params.flicker_control.flicker_mode_req = NEVER_FLICKER;
+ cam->params.flicker_control.mains_frequency = 60;
+
+ /* jpeg params */
+ cam->params.compression.jpeg_options = CPIA2_VC_VC_JPEG_OPT_DEFAULT;
+ cam->params.compression.creep_period = 2;
+ cam->params.compression.user_squeeze = 20;
+ cam->params.compression.inhibit_htables = false;
+
+ /* gpio params */
+ cam->params.vp_params.gpio_direction = 0; /* write, the default safe mode */
+ cam->params.vp_params.gpio_data = 0;
+
+ /* Target kb params */
+ cam->params.vc_params.target_kb = DEFAULT_TARGET_KB;
+
+ /***
+ * Set Sensor FPS as fast as possible.
+ ***/
+ if(cam->params.pnp_id.device_type == DEVICE_STV_672) {
+ if(cam->params.version.sensor_flags == CPIA2_VP_SENSOR_FLAGS_500)
+ cam->params.vp_params.frame_rate = CPIA2_VP_FRAMERATE_15;
+ else
+ cam->params.vp_params.frame_rate = CPIA2_VP_FRAMERATE_30;
+ } else {
+ cam->params.vp_params.frame_rate = CPIA2_VP_FRAMERATE_30;
+ }
+
+ /***
+ * Set default video mode as large as possible :
+ * for vga sensor set to vga, for cif sensor set to CIF.
+ ***/
+ if (cam->params.version.sensor_flags == CPIA2_VP_SENSOR_FLAGS_500) {
+ cam->sensor_type = CPIA2_SENSOR_500;
+ cam->video_size = VIDEOSIZE_VGA;
+ cam->params.roi.width = STV_IMAGE_VGA_COLS;
+ cam->params.roi.height = STV_IMAGE_VGA_ROWS;
+ } else {
+ cam->sensor_type = CPIA2_SENSOR_410;
+ cam->video_size = VIDEOSIZE_CIF;
+ cam->params.roi.width = STV_IMAGE_CIF_COLS;
+ cam->params.roi.height = STV_IMAGE_CIF_ROWS;
+ }
+
+ /***
+ * Fill in the v4l structures. video_cap is filled in inside the VIDIOCCAP
+ * Ioctl. Here, just do the window and picture stucts.
+ ***/
+ cam->vp.palette = (u16) VIDEO_PALETTE_RGB24; /* Is this right? */
+ cam->vp.brightness = (u16) cam->params.color_params.brightness * 256;
+ cam->vp.colour = (u16) cam->params.color_params.saturation * 256;
+ cam->vp.contrast = (u16) cam->params.color_params.contrast * 256;
+
+ cam->vw.x = 0;
+ cam->vw.y = 0;
+ cam->vw.width = cam->params.roi.width;
+ cam->vw.height = cam->params.roi.height;
+ cam->vw.flags = 0;
+ cam->vw.clipcount = 0;
+
+ return;
+}
+
+/******************************************************************************
+ *
+ * cpia2_init_camera_struct
+ *
+ * Initializes camera struct, does not call reset to fill in defaults.
+ *****************************************************************************/
+struct camera_data *cpia2_init_camera_struct(void)
+{
+ struct camera_data *cam;
+
+ cam = kmalloc(sizeof(*cam), GFP_KERNEL);
+
+ if (!cam) {
+ ERR("couldn't kmalloc cpia2 struct\n");
+ return NULL;
+ }
+
+ /* Default everything to 0 */
+ memset(cam, 0, sizeof(struct camera_data));
+
+ cam->present = 1;
+ init_MUTEX(&cam->busy_lock);
+ init_waitqueue_head(&cam->wq_stream);
+
+ return cam;
+}
+
+/******************************************************************************
+ *
+ * cpia2_init_camera
+ *
+ * Initializes camera.
+ *****************************************************************************/
+int cpia2_init_camera(struct camera_data *cam)
+{
+ DBG("Start\n");
+
+ cam->mmapped = false;
+
+ /* Get sensor and asic types before reset. */
+ cpia2_set_high_power(cam);
+ cpia2_get_version_info(cam);
+ if (cam->params.version.asic_id != CPIA2_ASIC_672) {
+ ERR("Device IO error (asicID has incorrect value of 0x%X\n",
+ cam->params.version.asic_id);
+ return -ENODEV;
+ }
+
+ /* Set GPIO direction and data to a safe state. */
+ cpia2_do_command(cam, CPIA2_CMD_SET_VC_MP_GPIO_DIRECTION,
+ TRANSFER_WRITE, 0);
+ cpia2_do_command(cam, CPIA2_CMD_SET_VC_MP_GPIO_DATA,
+ TRANSFER_WRITE, 0);
+
+ /* resetting struct requires version info for sensor and asic types */
+ reset_camera_struct(cam);
+
+ cpia2_set_low_power(cam);
+
+ DBG("End\n");
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * cpia2_allocate_buffers
+ *
+ *****************************************************************************/
+int cpia2_allocate_buffers(struct camera_data *cam)
+{
+ int i;
+
+ if(!cam->buffers) {
+ u32 size = cam->num_frames*sizeof(struct framebuf);
+ cam->buffers = kmalloc(size, GFP_KERNEL);
+ if(!cam->buffers) {
+ ERR("couldn't kmalloc frame buffer structures\n");
+ return -ENOMEM;
+ }
+ }
+
+ if(!cam->frame_buffer) {
+ cam->frame_buffer = rvmalloc(cam->frame_size*cam->num_frames);
+ if (!cam->frame_buffer) {
+ ERR("couldn't vmalloc frame buffer data area\n");
+ kfree(cam->buffers);
+ cam->buffers = NULL;
+ return -ENOMEM;
+ }
+ }
+
+ for(i=0; i<cam->num_frames-1; ++i) {
+ cam->buffers[i].next = &cam->buffers[i+1];
+ cam->buffers[i].data = cam->frame_buffer +i*cam->frame_size;
+ cam->buffers[i].status = FRAME_EMPTY;
+ cam->buffers[i].length = 0;
+ cam->buffers[i].max_length = 0;
+ cam->buffers[i].num = i;
+ }
+ cam->buffers[i].next = cam->buffers;
+ cam->buffers[i].data = cam->frame_buffer +i*cam->frame_size;
+ cam->buffers[i].status = FRAME_EMPTY;
+ cam->buffers[i].length = 0;
+ cam->buffers[i].max_length = 0;
+ cam->buffers[i].num = i;
+ cam->curbuff = cam->buffers;
+ cam->workbuff = cam->curbuff->next;
+ DBG("buffers=%p, curbuff=%p, workbuff=%p\n", cam->buffers, cam->curbuff,
+ cam->workbuff);
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * cpia2_free_buffers
+ *
+ *****************************************************************************/
+void cpia2_free_buffers(struct camera_data *cam)
+{
+ if(cam->buffers) {
+ kfree(cam->buffers);
+ cam->buffers = NULL;
+ }
+ if(cam->frame_buffer) {
+ rvfree(cam->frame_buffer, cam->frame_size*cam->num_frames);
+ cam->frame_buffer = NULL;
+ }
+}
+
+/******************************************************************************
+ *
+ * cpia2_read
+ *
+ *****************************************************************************/
+long cpia2_read(struct camera_data *cam,
+ char __user *buf, unsigned long count, int noblock)
+{
+ struct framebuf *frame;
+ if (!count) {
+ return 0;
+ }
+
+ if (!buf) {
+ ERR("%s: buffer NULL\n",__FUNCTION__);
+ return -EINVAL;
+ }
+
+ if (!cam) {
+ ERR("%s: Internal error, camera_data NULL!\n",__FUNCTION__);
+ return -EINVAL;
+ }
+
+ /* make this _really_ smp and multithread-safe */
+ if (down_interruptible(&cam->busy_lock))
+ return -ERESTARTSYS;
+
+ if (!cam->present) {
+ LOG("%s: camera removed\n",__FUNCTION__);
+ up(&cam->busy_lock);
+ return 0; /* EOF */
+ }
+
+ if(!cam->streaming) {
+ /* Start streaming */
+ cpia2_usb_stream_start(cam,
+ cam->params.camera_state.stream_mode);
+ }
+
+ /* Copy cam->curbuff in case it changes while we're processing */
+ frame = cam->curbuff;
+ if (noblock && frame->status != FRAME_READY) {
+ up(&cam->busy_lock);
+ return -EAGAIN;
+ }
+
+ if(frame->status != FRAME_READY) {
+ up(&cam->busy_lock);
+ wait_event_interruptible(cam->wq_stream,
+ !cam->present ||
+ (frame = cam->curbuff)->status == FRAME_READY);
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+ /* make this _really_ smp and multithread-safe */
+ if (down_interruptible(&cam->busy_lock)) {
+ return -ERESTARTSYS;
+ }
+ if(!cam->present) {
+ up(&cam->busy_lock);
+ return 0;
+ }
+ }
+
+ /* copy data to user space */
+ if (frame->length > count) {
+ up(&cam->busy_lock);
+ return -EFAULT;
+ }
+ if (copy_to_user(buf, frame->data, frame->length)) {
+ up(&cam->busy_lock);
+ return -EFAULT;
+ }
+
+ count = frame->length;
+
+ frame->status = FRAME_EMPTY;
+
+ up(&cam->busy_lock);
+ return count;
+}
+
+/******************************************************************************
+ *
+ * cpia2_poll
+ *
+ *****************************************************************************/
+unsigned int cpia2_poll(struct camera_data *cam, struct file *filp,
+ poll_table *wait)
+{
+ unsigned int status=0;
+
+ if(!cam) {
+ ERR("%s: Internal error, camera_data not found!\n",__FUNCTION__);
+ return POLLERR;
+ }
+
+ down(&cam->busy_lock);
+
+ if(!cam->present) {
+ up(&cam->busy_lock);
+ return POLLHUP;
+ }
+
+ if(!cam->streaming) {
+ /* Start streaming */
+ cpia2_usb_stream_start(cam,
+ cam->params.camera_state.stream_mode);
+ }
+
+ up(&cam->busy_lock);
+ poll_wait(filp, &cam->wq_stream, wait);
+ down(&cam->busy_lock);
+
+ if(!cam->present)
+ status = POLLHUP;
+ else if(cam->curbuff->status == FRAME_READY)
+ status = POLLIN | POLLRDNORM;
+
+ up(&cam->busy_lock);
+ return status;
+}
+
+/******************************************************************************
+ *
+ * cpia2_remap_buffer
+ *
+ *****************************************************************************/
+int cpia2_remap_buffer(struct camera_data *cam, struct vm_area_struct *vma)
+{
+ const char *adr = (const char *)vma->vm_start;
+ unsigned long size = vma->vm_end-vma->vm_start;
+ unsigned long start_offset = vma->vm_pgoff << PAGE_SHIFT;
+ unsigned long start = (unsigned long) adr;
+ unsigned long page, pos;
+
+ if (!cam)
+ return -ENODEV;
+
+ DBG("mmap offset:%ld size:%ld\n", start_offset, size);
+
+ /* make this _really_ smp-safe */
+ if (down_interruptible(&cam->busy_lock))
+ return -ERESTARTSYS;
+
+ if (!cam->present) {
+ up(&cam->busy_lock);
+ return -ENODEV;
+ }
+
+ if (size > cam->frame_size*cam->num_frames ||
+ (start_offset % cam->frame_size) != 0 ||
+ (start_offset+size > cam->frame_size*cam->num_frames)) {
+ up(&cam->busy_lock);
+ return -EINVAL;
+ }
+
+ pos = ((unsigned long) (cam->frame_buffer)) + start_offset;
+ while (size > 0) {
+ page = kvirt_to_pa(pos);
+ if (remap_pfn_range(vma, start, page >> PAGE_SHIFT, PAGE_SIZE, PAGE_SHARED)) {
+ up(&cam->busy_lock);
+ return -EAGAIN;
+ }
+ start += PAGE_SIZE;
+ pos += PAGE_SIZE;
+ if (size > PAGE_SIZE)
+ size -= PAGE_SIZE;
+ else
+ size = 0;
+ }
+
+ cam->mmapped = true;
+ up(&cam->busy_lock);
+ return 0;
+}
+
diff --git a/drivers/media/video/cpia2/cpia2_registers.h b/drivers/media/video/cpia2/cpia2_registers.h
new file mode 100644
index 00000000000..3bbec514a96
--- /dev/null
+++ b/drivers/media/video/cpia2/cpia2_registers.h
@@ -0,0 +1,476 @@
+/****************************************************************************
+ *
+ * Filename: cpia2registers.h
+ *
+ * Copyright 2001, STMicrolectronics, Inc.
+ *
+ * Description:
+ * Definitions for the CPia2 register set
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ ****************************************************************************/
+
+#ifndef CPIA2_REGISTER_HEADER
+#define CPIA2_REGISTER_HEADER
+
+/***
+ * System register set (Bank 0)
+ ***/
+#define CPIA2_SYSTEM_DEVICE_HI 0x00
+#define CPIA2_SYSTEM_DEVICE_LO 0x01
+
+#define CPIA2_SYSTEM_SYSTEM_CONTROL 0x02
+#define CPIA2_SYSTEM_CONTROL_LOW_POWER 0x00
+#define CPIA2_SYSTEM_CONTROL_HIGH_POWER 0x01
+#define CPIA2_SYSTEM_CONTROL_SUSPEND 0x02
+#define CPIA2_SYSTEM_CONTROL_V2W_ERR 0x10
+#define CPIA2_SYSTEM_CONTROL_RB_ERR 0x10
+#define CPIA2_SYSTEM_CONTROL_CLEAR_ERR 0x80
+
+#define CPIA2_SYSTEM_INT_PACKET_CTRL 0x04
+#define CPIA2_SYSTEM_INT_PACKET_CTRL_ENABLE_SW_XX 0x01
+#define CPIA2_SYSTEM_INT_PACKET_CTRL_ENABLE_EOF 0x02
+#define CPIA2_SYSTEM_INT_PACKET_CTRL_ENABLE_INT1 0x04
+
+#define CPIA2_SYSTEM_CACHE_CTRL 0x05
+#define CPIA2_SYSTEM_CACHE_CTRL_CACHE_RESET 0x01
+#define CPIA2_SYSTEM_CACHE_CTRL_CACHE_FLUSH 0x02
+
+#define CPIA2_SYSTEM_SERIAL_CTRL 0x06
+#define CPIA2_SYSTEM_SERIAL_CTRL_NULL_CMD 0x00
+#define CPIA2_SYSTEM_SERIAL_CTRL_START_CMD 0x01
+#define CPIA2_SYSTEM_SERIAL_CTRL_STOP_CMD 0x02
+#define CPIA2_SYSTEM_SERIAL_CTRL_WRITE_CMD 0x03
+#define CPIA2_SYSTEM_SERIAL_CTRL_READ_ACK_CMD 0x04
+#define CPIA2_SYSTEM_SERIAL_CTRL_READ_NACK_CMD 0x05
+
+#define CPIA2_SYSTEM_SERIAL_DATA 0x07
+
+#define CPIA2_SYSTEM_VP_SERIAL_ADDR 0x08
+
+/***
+ * I2C addresses for various devices in CPiA2
+ ***/
+#define CPIA2_SYSTEM_VP_SERIAL_ADDR_SENSOR 0x20
+#define CPIA2_SYSTEM_VP_SERIAL_ADDR_VP 0x88
+#define CPIA2_SYSTEM_VP_SERIAL_ADDR_676_VP 0x8A
+
+#define CPIA2_SYSTEM_SPARE_REG1 0x09
+#define CPIA2_SYSTEM_SPARE_REG2 0x0A
+#define CPIA2_SYSTEM_SPARE_REG3 0x0B
+
+#define CPIA2_SYSTEM_MC_PORT_0 0x0C
+#define CPIA2_SYSTEM_MC_PORT_1 0x0D
+#define CPIA2_SYSTEM_MC_PORT_2 0x0E
+#define CPIA2_SYSTEM_MC_PORT_3 0x0F
+
+#define CPIA2_SYSTEM_STATUS_PKT 0x20
+#define CPIA2_SYSTEM_STATUS_PKT_END 0x27
+
+#define CPIA2_SYSTEM_DESCRIP_VID_HI 0x30
+#define CPIA2_SYSTEM_DESCRIP_VID_LO 0x31
+#define CPIA2_SYSTEM_DESCRIP_PID_HI 0x32
+#define CPIA2_SYSTEM_DESCRIP_PID_LO 0x33
+
+#define CPIA2_SYSTEM_FW_VERSION_HI 0x34
+#define CPIA2_SYSTEM_FW_VERSION_LO 0x35
+
+#define CPIA2_SYSTEM_CACHE_START_INDEX 0x80
+#define CPIA2_SYSTEM_CACHE_MAX_WRITES 0x10
+
+/***
+ * VC register set (Bank 1)
+ ***/
+#define CPIA2_VC_ASIC_ID 0x80
+
+#define CPIA2_VC_ASIC_REV 0x81
+
+#define CPIA2_VC_PW_CTRL 0x82
+#define CPIA2_VC_PW_CTRL_COLDSTART 0x01
+#define CPIA2_VC_PW_CTRL_CP_CLK_EN 0x02
+#define CPIA2_VC_PW_CTRL_VP_RESET_N 0x04
+#define CPIA2_VC_PW_CTRL_VC_CLK_EN 0x08
+#define CPIA2_VC_PW_CTRL_VC_RESET_N 0x10
+#define CPIA2_VC_PW_CTRL_GOTO_SUSPEND 0x20
+#define CPIA2_VC_PW_CTRL_UDC_SUSPEND 0x40
+#define CPIA2_VC_PW_CTRL_PWR_DOWN 0x80
+
+#define CPIA2_VC_WAKEUP 0x83
+#define CPIA2_VC_WAKEUP_SW_ENABLE 0x01
+#define CPIA2_VC_WAKEUP_XX_ENABLE 0x02
+#define CPIA2_VC_WAKEUP_SW_ATWAKEUP 0x04
+#define CPIA2_VC_WAKEUP_XX_ATWAKEUP 0x08
+
+#define CPIA2_VC_CLOCK_CTRL 0x84
+#define CPIA2_VC_CLOCK_CTRL_TESTUP72 0x01
+
+#define CPIA2_VC_INT_ENABLE 0x88
+#define CPIA2_VC_INT_ENABLE_XX_IE 0x01
+#define CPIA2_VC_INT_ENABLE_SW_IE 0x02
+#define CPIA2_VC_INT_ENABLE_VC_IE 0x04
+#define CPIA2_VC_INT_ENABLE_USBDATA_IE 0x08
+#define CPIA2_VC_INT_ENABLE_USBSETUP_IE 0x10
+#define CPIA2_VC_INT_ENABLE_USBCFG_IE 0x20
+
+#define CPIA2_VC_INT_FLAG 0x89
+#define CPIA2_VC_INT_ENABLE_XX_FLAG 0x01
+#define CPIA2_VC_INT_ENABLE_SW_FLAG 0x02
+#define CPIA2_VC_INT_ENABLE_VC_FLAG 0x04
+#define CPIA2_VC_INT_ENABLE_USBDATA_FLAG 0x08
+#define CPIA2_VC_INT_ENABLE_USBSETUP_FLAG 0x10
+#define CPIA2_VC_INT_ENABLE_USBCFG_FLAG 0x20
+#define CPIA2_VC_INT_ENABLE_SET_RESET_BIT 0x80
+
+#define CPIA2_VC_INT_STATE 0x8A
+#define CPIA2_VC_INT_STATE_XX_STATE 0x01
+#define CPIA2_VC_INT_STATE_SW_STATE 0x02
+
+#define CPIA2_VC_MP_DIR 0x90
+#define CPIA2_VC_MP_DIR_INPUT 0x00
+#define CPIA2_VC_MP_DIR_OUTPUT 0x01
+
+#define CPIA2_VC_MP_DATA 0x91
+
+#define CPIA2_VC_DP_CTRL 0x98
+#define CPIA2_VC_DP_CTRL_MODE_0 0x00
+#define CPIA2_VC_DP_CTRL_MODE_A 0x01
+#define CPIA2_VC_DP_CTRL_MODE_B 0x02
+#define CPIA2_VC_DP_CTRL_MODE_C 0x03
+#define CPIA2_VC_DP_CTRL_FAKE_FST 0x04
+
+#define CPIA2_VC_AD_CTRL 0x99
+#define CPIA2_VC_AD_CTRL_SRC_0 0x00
+#define CPIA2_VC_AD_CTRL_SRC_DIGI_A 0x01
+#define CPIA2_VC_AD_CTRL_SRC_REG 0x02
+#define CPIA2_VC_AD_CTRL_DST_USB 0x00
+#define CPIA2_VC_AD_CTRL_DST_REG 0x04
+
+#define CPIA2_VC_AD_TEST_IN 0x9B
+
+#define CPIA2_VC_AD_TEST_OUT 0x9C
+
+#define CPIA2_VC_AD_STATUS 0x9D
+#define CPIA2_VC_AD_STATUS_EMPTY 0x01
+#define CPIA2_VC_AD_STATUS_FULL 0x02
+
+#define CPIA2_VC_DP_DATA 0x9E
+
+#define CPIA2_VC_ST_CTRL 0xA0
+#define CPIA2_VC_ST_CTRL_SRC_VC 0x00
+#define CPIA2_VC_ST_CTRL_SRC_DP 0x01
+#define CPIA2_VC_ST_CTRL_SRC_REG 0x02
+
+#define CPIA2_VC_ST_CTRL_RAW_SELECT 0x04
+
+#define CPIA2_VC_ST_CTRL_DST_USB 0x00
+#define CPIA2_VC_ST_CTRL_DST_DP 0x08
+#define CPIA2_VC_ST_CTRL_DST_REG 0x10
+
+#define CPIA2_VC_ST_CTRL_FIFO_ENABLE 0x20
+#define CPIA2_VC_ST_CTRL_EOF_DETECT 0x40
+
+#define CPIA2_VC_ST_TEST 0xA1
+#define CPIA2_VC_ST_TEST_MODE_MANUAL 0x00
+#define CPIA2_VC_ST_TEST_MODE_INCREMENT 0x02
+
+#define CPIA2_VC_ST_TEST_AUTO_FILL 0x08
+
+#define CPIA2_VC_ST_TEST_REPEAT_FIFO 0x10
+
+#define CPIA2_VC_ST_TEST_IN 0xA2
+
+#define CPIA2_VC_ST_TEST_OUT 0xA3
+
+#define CPIA2_VC_ST_STATUS 0xA4
+#define CPIA2_VC_ST_STATUS_EMPTY 0x01
+#define CPIA2_VC_ST_STATUS_FULL 0x02
+
+#define CPIA2_VC_ST_FRAME_DETECT_1 0xA5
+
+#define CPIA2_VC_ST_FRAME_DETECT_2 0xA6
+
+#define CPIA2_VC_USB_CTRL 0xA8
+#define CPIA2_VC_USB_CTRL_CMD_STALLED 0x01
+#define CPIA2_VC_USB_CTRL_CMD_READY 0x02
+#define CPIA2_VC_USB_CTRL_CMD_STATUS 0x04
+#define CPIA2_VC_USB_CTRL_CMD_STATUS_DIR 0x08
+#define CPIA2_VC_USB_CTRL_CMD_NO_CLASH 0x10
+#define CPIA2_VC_USB_CTRL_CMD_MICRO_ACCESS 0x80
+
+#define CPIA2_VC_USB_STRM 0xA9
+#define CPIA2_VC_USB_STRM_ISO_ENABLE 0x01
+#define CPIA2_VC_USB_STRM_BLK_ENABLE 0x02
+#define CPIA2_VC_USB_STRM_INT_ENABLE 0x04
+#define CPIA2_VC_USB_STRM_AUD_ENABLE 0x08
+
+#define CPIA2_VC_USB_STATUS 0xAA
+#define CPIA2_VC_USB_STATUS_CMD_IN_PROGRESS 0x01
+#define CPIA2_VC_USB_STATUS_CMD_STATUS_STALL 0x02
+#define CPIA2_VC_USB_STATUS_CMD_HANDSHAKE 0x04
+#define CPIA2_VC_USB_STATUS_CMD_OVERRIDE 0x08
+#define CPIA2_VC_USB_STATUS_CMD_FIFO_BUSY 0x10
+#define CPIA2_VC_USB_STATUS_BULK_REPEAT_TXN 0x20
+#define CPIA2_VC_USB_STATUS_CONFIG_DONE 0x40
+#define CPIA2_VC_USB_STATUS_USB_SUSPEND 0x80
+
+#define CPIA2_VC_USB_CMDW 0xAB
+
+#define CPIA2_VC_USB_DATARW 0xAC
+
+#define CPIA2_VC_USB_INFO 0xAD
+
+#define CPIA2_VC_USB_CONFIG 0xAE
+
+#define CPIA2_VC_USB_SETTINGS 0xAF
+#define CPIA2_VC_USB_SETTINGS_CONFIG_MASK 0x03
+#define CPIA2_VC_USB_SETTINGS_INTERFACE_MASK 0x0C
+#define CPIA2_VC_USB_SETTINGS_ALTERNATE_MASK 0x70
+
+#define CPIA2_VC_USB_ISOLIM 0xB0
+
+#define CPIA2_VC_USB_ISOFAILS 0xB1
+
+#define CPIA2_VC_USB_ISOMAXPKTHI 0xB2
+
+#define CPIA2_VC_USB_ISOMAXPKTLO 0xB3
+
+#define CPIA2_VC_V2W_CTRL 0xB8
+#define CPIA2_VC_V2W_SELECT 0x01
+
+#define CPIA2_VC_V2W_SCL 0xB9
+
+#define CPIA2_VC_V2W_SDA 0xBA
+
+#define CPIA2_VC_VC_CTRL 0xC0
+#define CPIA2_VC_VC_CTRL_RUN 0x01
+#define CPIA2_VC_VC_CTRL_SINGLESHOT 0x02
+#define CPIA2_VC_VC_CTRL_IDLING 0x04
+#define CPIA2_VC_VC_CTRL_INHIBIT_H_TABLES 0x10
+#define CPIA2_VC_VC_CTRL_INHIBIT_Q_TABLES 0x20
+#define CPIA2_VC_VC_CTRL_INHIBIT_PRIVATE 0x40
+
+#define CPIA2_VC_VC_RESTART_IVAL_HI 0xC1
+
+#define CPIA2_VC_VC_RESTART_IVAL_LO 0xC2
+
+#define CPIA2_VC_VC_FORMAT 0xC3
+#define CPIA2_VC_VC_FORMAT_UFIRST 0x01
+#define CPIA2_VC_VC_FORMAT_MONO 0x02
+#define CPIA2_VC_VC_FORMAT_DECIMATING 0x04
+#define CPIA2_VC_VC_FORMAT_SHORTLINE 0x08
+#define CPIA2_VC_VC_FORMAT_SELFTEST 0x10
+
+#define CPIA2_VC_VC_CLOCKS 0xC4
+#define CPIA2_VC_VC_CLOCKS_CLKDIV_MASK 0x03
+#define CPIA2_VC_VC_672_CLOCKS_CIF_DIV_BY_3 0x04
+#define CPIA2_VC_VC_672_CLOCKS_SCALING 0x08
+#define CPIA2_VC_VC_CLOCKS_LOGDIV0 0x00
+#define CPIA2_VC_VC_CLOCKS_LOGDIV1 0x01
+#define CPIA2_VC_VC_CLOCKS_LOGDIV2 0x02
+#define CPIA2_VC_VC_CLOCKS_LOGDIV3 0x03
+#define CPIA2_VC_VC_676_CLOCKS_CIF_DIV_BY_3 0x08
+#define CPIA2_VC_VC_676_CLOCKS_SCALING 0x10
+
+#define CPIA2_VC_VC_IHSIZE_LO 0xC5
+
+#define CPIA2_VC_VC_XLIM_HI 0xC6
+
+#define CPIA2_VC_VC_XLIM_LO 0xC7
+
+#define CPIA2_VC_VC_YLIM_HI 0xC8
+
+#define CPIA2_VC_VC_YLIM_LO 0xC9
+
+#define CPIA2_VC_VC_OHSIZE 0xCA
+
+#define CPIA2_VC_VC_OVSIZE 0xCB
+
+#define CPIA2_VC_VC_HCROP 0xCC
+
+#define CPIA2_VC_VC_VCROP 0xCD
+
+#define CPIA2_VC_VC_HPHASE 0xCE
+
+#define CPIA2_VC_VC_VPHASE 0xCF
+
+#define CPIA2_VC_VC_HISPAN 0xD0
+
+#define CPIA2_VC_VC_VISPAN 0xD1
+
+#define CPIA2_VC_VC_HICROP 0xD2
+
+#define CPIA2_VC_VC_VICROP 0xD3
+
+#define CPIA2_VC_VC_HFRACT 0xD4
+#define CPIA2_VC_VC_HFRACT_DEN_MASK 0x0F
+#define CPIA2_VC_VC_HFRACT_NUM_MASK 0xF0
+
+#define CPIA2_VC_VC_VFRACT 0xD5
+#define CPIA2_VC_VC_VFRACT_DEN_MASK 0x0F
+#define CPIA2_VC_VC_VFRACT_NUM_MASK 0xF0
+
+#define CPIA2_VC_VC_JPEG_OPT 0xD6
+#define CPIA2_VC_VC_JPEG_OPT_DOUBLE_SQUEEZE 0x01
+#define CPIA2_VC_VC_JPEG_OPT_NO_DC_AUTO_SQUEEZE 0x02
+#define CPIA2_VC_VC_JPEG_OPT_AUTO_SQUEEZE 0x04
+#define CPIA2_VC_VC_JPEG_OPT_DEFAULT (CPIA2_VC_VC_JPEG_OPT_DOUBLE_SQUEEZE|\
+ CPIA2_VC_VC_JPEG_OPT_AUTO_SQUEEZE)
+
+
+#define CPIA2_VC_VC_CREEP_PERIOD 0xD7
+#define CPIA2_VC_VC_USER_SQUEEZE 0xD8
+#define CPIA2_VC_VC_TARGET_KB 0xD9
+
+#define CPIA2_VC_VC_AUTO_SQUEEZE 0xE6
+
+
+/***
+ * VP register set (Bank 2)
+ ***/
+#define CPIA2_VP_DEVICEH 0
+#define CPIA2_VP_DEVICEL 1
+
+#define CPIA2_VP_SYSTEMSTATE 0x02
+#define CPIA2_VP_SYSTEMSTATE_HK_ALIVE 0x01
+
+#define CPIA2_VP_SYSTEMCTRL 0x03
+#define CPIA2_VP_SYSTEMCTRL_REQ_CLEAR_ERROR 0x80
+#define CPIA2_VP_SYSTEMCTRL_POWER_DOWN_PLL 0x20
+#define CPIA2_VP_SYSTEMCTRL_REQ_SUSPEND_STATE 0x10
+#define CPIA2_VP_SYSTEMCTRL_REQ_SERIAL_WAKEUP 0x08
+#define CPIA2_VP_SYSTEMCTRL_REQ_AUTOLOAD 0x04
+#define CPIA2_VP_SYSTEMCTRL_HK_CONTROL 0x02
+#define CPIA2_VP_SYSTEMCTRL_POWER_CONTROL 0x01
+
+#define CPIA2_VP_SENSOR_FLAGS 0x05
+#define CPIA2_VP_SENSOR_FLAGS_404 0x01
+#define CPIA2_VP_SENSOR_FLAGS_407 0x02
+#define CPIA2_VP_SENSOR_FLAGS_409 0x04
+#define CPIA2_VP_SENSOR_FLAGS_410 0x08
+#define CPIA2_VP_SENSOR_FLAGS_500 0x10
+
+#define CPIA2_VP_SENSOR_REV 0x06
+
+#define CPIA2_VP_DEVICE_CONFIG 0x07
+#define CPIA2_VP_DEVICE_CONFIG_SERIAL_BRIDGE 0x01
+
+#define CPIA2_VP_GPIO_DIRECTION 0x08
+#define CPIA2_VP_GPIO_READ 0xFF
+#define CPIA2_VP_GPIO_WRITE 0x00
+
+#define CPIA2_VP_GPIO_DATA 0x09
+
+#define CPIA2_VP_RAM_ADDR_H 0x0A
+#define CPIA2_VP_RAM_ADDR_L 0x0B
+#define CPIA2_VP_RAM_DATA 0x0C
+
+#define CPIA2_VP_PATCH_REV 0x0F
+
+#define CPIA2_VP4_USER_MODE 0x10
+#define CPIA2_VP5_USER_MODE 0x13
+#define CPIA2_VP_USER_MODE_CIF 0x01
+#define CPIA2_VP_USER_MODE_QCIFDS 0x02
+#define CPIA2_VP_USER_MODE_QCIFPTC 0x04
+#define CPIA2_VP_USER_MODE_QVGADS 0x08
+#define CPIA2_VP_USER_MODE_QVGAPTC 0x10
+#define CPIA2_VP_USER_MODE_VGA 0x20
+
+#define CPIA2_VP4_FRAMERATE_REQUEST 0x11
+#define CPIA2_VP5_FRAMERATE_REQUEST 0x14
+#define CPIA2_VP_FRAMERATE_60 0x80
+#define CPIA2_VP_FRAMERATE_50 0x40
+#define CPIA2_VP_FRAMERATE_30 0x20
+#define CPIA2_VP_FRAMERATE_25 0x10
+#define CPIA2_VP_FRAMERATE_15 0x08
+#define CPIA2_VP_FRAMERATE_12_5 0x04
+#define CPIA2_VP_FRAMERATE_7_5 0x02
+#define CPIA2_VP_FRAMERATE_6_25 0x01
+
+#define CPIA2_VP4_USER_EFFECTS 0x12
+#define CPIA2_VP5_USER_EFFECTS 0x15
+#define CPIA2_VP_USER_EFFECTS_COLBARS 0x01
+#define CPIA2_VP_USER_EFFECTS_COLBARS_GRAD 0x02
+#define CPIA2_VP_USER_EFFECTS_MIRROR 0x04
+#define CPIA2_VP_USER_EFFECTS_FLIP 0x40 // VP5 only
+
+/* NOTE: CPIA2_VP_EXPOSURE_MODES shares the same register as VP5 User
+ * Effects */
+#define CPIA2_VP_EXPOSURE_MODES 0x15
+#define CPIA2_VP_EXPOSURE_MODES_INHIBIT_FLICKER 0x20
+#define CPIA2_VP_EXPOSURE_MODES_COMPILE_EXP 0x10
+
+#define CPIA2_VP4_EXPOSURE_TARGET 0x16 // VP4
+#define CPIA2_VP5_EXPOSURE_TARGET 0x20 // VP5
+
+#define CPIA2_VP_FLICKER_MODES 0x1B
+#define CPIA2_VP_FLICKER_MODES_50HZ 0x80
+#define CPIA2_VP_FLICKER_MODES_CUSTOM_FLT_FFREQ 0x40
+#define CPIA2_VP_FLICKER_MODES_NEVER_FLICKER 0x20
+#define CPIA2_VP_FLICKER_MODES_INHIBIT_RUB 0x10
+#define CPIA2_VP_FLICKER_MODES_ADJUST_LINE_FREQ 0x08
+#define CPIA2_VP_FLICKER_MODES_CUSTOM_INT_FFREQ 0x04
+
+#define CPIA2_VP_UMISC 0x1D
+#define CPIA2_VP_UMISC_FORCE_MONO 0x80
+#define CPIA2_VP_UMISC_FORCE_ID_MASK 0x40
+#define CPIA2_VP_UMISC_INHIBIT_AUTO_FGS 0x20
+#define CPIA2_VP_UMISC_INHIBIT_AUTO_DIMS 0x08
+#define CPIA2_VP_UMISC_OPT_FOR_SENSOR_DS 0x04
+#define CPIA2_VP_UMISC_INHIBIT_AUTO_MODE_INT 0x02
+
+#define CPIA2_VP5_ANTIFLKRSETUP 0x22 //34
+
+#define CPIA2_VP_INTERPOLATION 0x24
+#define CPIA2_VP_INTERPOLATION_EVEN_FIRST 0x40
+#define CPIA2_VP_INTERPOLATION_HJOG 0x20
+#define CPIA2_VP_INTERPOLATION_VJOG 0x10
+
+#define CPIA2_VP_GAMMA 0x25
+#define CPIA2_VP_DEFAULT_GAMMA 0x10
+
+#define CPIA2_VP_YRANGE 0x26
+
+#define CPIA2_VP_SATURATION 0x27
+
+#define CPIA2_VP5_MYBLACK_LEVEL 0x3A //58
+#define CPIA2_VP5_MCYRANGE 0x3B //59
+#define CPIA2_VP5_MYCEILING 0x3C //60
+#define CPIA2_VP5_MCUVSATURATION 0x3D //61
+
+
+#define CPIA2_VP_REHASH_VALUES 0x60
+
+
+/***
+ * Common sensor registers
+ ***/
+#define CPIA2_SENSOR_DEVICE_H 0x00
+#define CPIA2_SENSOR_DEVICE_L 0x01
+
+#define CPIA2_SENSOR_DATA_FORMAT 0x16
+#define CPIA2_SENSOR_DATA_FORMAT_HMIRROR 0x08
+#define CPIA2_SENSOR_DATA_FORMAT_VMIRROR 0x10
+
+#define CPIA2_SENSOR_CR1 0x76
+#define CPIA2_SENSOR_CR1_STAND_BY 0x01
+#define CPIA2_SENSOR_CR1_DOWN_RAMP_GEN 0x02
+#define CPIA2_SENSOR_CR1_DOWN_COLUMN_ADC 0x04
+#define CPIA2_SENSOR_CR1_DOWN_CAB_REGULATOR 0x08
+#define CPIA2_SENSOR_CR1_DOWN_AUDIO_REGULATOR 0x10
+#define CPIA2_SENSOR_CR1_DOWN_VRT_AMP 0x20
+#define CPIA2_SENSOR_CR1_DOWN_BAND_GAP 0x40
+
+#endif
diff --git a/drivers/media/video/cpia2/cpia2_usb.c b/drivers/media/video/cpia2/cpia2_usb.c
new file mode 100644
index 00000000000..f4da0294149
--- /dev/null
+++ b/drivers/media/video/cpia2/cpia2_usb.c
@@ -0,0 +1,907 @@
+/****************************************************************************
+ *
+ * Filename: cpia2_usb.c
+ *
+ * Copyright 2001, STMicrolectronics, Inc.
+ * Contact: steve.miller@st.com
+ *
+ * Description:
+ * This is a USB driver for CPia2 based video cameras.
+ * The infrastructure of this driver is based on the cpia usb driver by
+ * Jochen Scharrlach and Johannes Erdfeldt.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Stripped of 2.4 stuff ready for main kernel submit by
+ * Alan Cox <alan@redhat.com>
+ ****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include "cpia2.h"
+
+static int frame_sizes[] = {
+ 0, // USBIF_CMDONLY
+ 0, // USBIF_BULK
+ 128, // USBIF_ISO_1
+ 384, // USBIF_ISO_2
+ 640, // USBIF_ISO_3
+ 768, // USBIF_ISO_4
+ 896, // USBIF_ISO_5
+ 1023, // USBIF_ISO_6
+};
+
+#define FRAMES_PER_DESC 10
+#define FRAME_SIZE_PER_DESC frame_sizes[cam->cur_alt]
+
+static void process_frame(struct camera_data *cam);
+static void cpia2_usb_complete(struct urb *urb, struct pt_regs *);
+static int cpia2_usb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id);
+static void cpia2_usb_disconnect(struct usb_interface *intf);
+
+static void free_sbufs(struct camera_data *cam);
+static void add_APPn(struct camera_data *cam);
+static void add_COM(struct camera_data *cam);
+static int submit_urbs(struct camera_data *cam);
+static int set_alternate(struct camera_data *cam, unsigned int alt);
+static int configure_transfer_mode(struct camera_data *cam, unsigned int alt);
+
+static struct usb_device_id cpia2_id_table[] = {
+ {USB_DEVICE(0x0553, 0x0100)},
+ {USB_DEVICE(0x0553, 0x0140)},
+ {USB_DEVICE(0x0553, 0x0151)}, /* STV0676 */
+ {} /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, cpia2_id_table);
+
+static struct usb_driver cpia2_driver = {
+ .name = "cpia2",
+ .probe = cpia2_usb_probe,
+ .disconnect = cpia2_usb_disconnect,
+ .id_table = cpia2_id_table
+};
+
+
+/******************************************************************************
+ *
+ * process_frame
+ *
+ *****************************************************************************/
+static void process_frame(struct camera_data *cam)
+{
+ static int frame_count = 0;
+
+ unsigned char *inbuff = cam->workbuff->data;
+
+ DBG("Processing frame #%d, current:%d\n",
+ cam->workbuff->num, cam->curbuff->num);
+
+ if(cam->workbuff->length > cam->workbuff->max_length)
+ cam->workbuff->max_length = cam->workbuff->length;
+
+ if ((inbuff[0] == 0xFF) && (inbuff[1] == 0xD8)) {
+ frame_count++;
+ } else {
+ cam->workbuff->status = FRAME_ERROR;
+ DBG("Start of frame not found\n");
+ return;
+ }
+
+ /***
+ * Now the output buffer should have a JPEG image in it.
+ ***/
+ if(!cam->first_image_seen) {
+ /* Always skip the first image after streaming
+ * starts. It is almost certainly corrupt. */
+ cam->first_image_seen = 1;
+ cam->workbuff->status = FRAME_EMPTY;
+ return;
+ }
+ if (cam->workbuff->length > 3) {
+ if(cam->mmapped &&
+ cam->workbuff->length < cam->workbuff->max_length) {
+ /* No junk in the buffers */
+ memset(cam->workbuff->data+cam->workbuff->length,
+ 0, cam->workbuff->max_length-
+ cam->workbuff->length);
+ }
+ cam->workbuff->max_length = cam->workbuff->length;
+ cam->workbuff->status = FRAME_READY;
+
+ if(!cam->mmapped && cam->num_frames > 2) {
+ /* During normal reading, the most recent
+ * frame will be read. If the current frame
+ * hasn't started reading yet, it will never
+ * be read, so mark it empty. If the buffer is
+ * mmapped, or we have few buffers, we need to
+ * wait for the user to free the buffer.
+ *
+ * NOTE: This is not entirely foolproof with 3
+ * buffers, but it would take an EXTREMELY
+ * overloaded system to cause problems (possible
+ * image data corruption). Basically, it would
+ * need to take more time to execute cpia2_read
+ * than it would for the camera to send
+ * cam->num_frames-2 frames before problems
+ * could occur.
+ */
+ cam->curbuff->status = FRAME_EMPTY;
+ }
+ cam->curbuff = cam->workbuff;
+ cam->workbuff = cam->workbuff->next;
+ DBG("Changed buffers, work:%d, current:%d\n",
+ cam->workbuff->num, cam->curbuff->num);
+ return;
+ } else {
+ DBG("Not enough data for an image.\n");
+ }
+
+ cam->workbuff->status = FRAME_ERROR;
+ return;
+}
+
+/******************************************************************************
+ *
+ * add_APPn
+ *
+ * Adds a user specified APPn record
+ *****************************************************************************/
+static void add_APPn(struct camera_data *cam)
+{
+ if(cam->APP_len > 0) {
+ cam->workbuff->data[cam->workbuff->length++] = 0xFF;
+ cam->workbuff->data[cam->workbuff->length++] = 0xE0+cam->APPn;
+ cam->workbuff->data[cam->workbuff->length++] = 0;
+ cam->workbuff->data[cam->workbuff->length++] = cam->APP_len+2;
+ memcpy(cam->workbuff->data+cam->workbuff->length,
+ cam->APP_data, cam->APP_len);
+ cam->workbuff->length += cam->APP_len;
+ }
+}
+
+/******************************************************************************
+ *
+ * add_COM
+ *
+ * Adds a user specified COM record
+ *****************************************************************************/
+static void add_COM(struct camera_data *cam)
+{
+ if(cam->COM_len > 0) {
+ cam->workbuff->data[cam->workbuff->length++] = 0xFF;
+ cam->workbuff->data[cam->workbuff->length++] = 0xFE;
+ cam->workbuff->data[cam->workbuff->length++] = 0;
+ cam->workbuff->data[cam->workbuff->length++] = cam->COM_len+2;
+ memcpy(cam->workbuff->data+cam->workbuff->length,
+ cam->COM_data, cam->COM_len);
+ cam->workbuff->length += cam->COM_len;
+ }
+}
+
+/******************************************************************************
+ *
+ * cpia2_usb_complete
+ *
+ * callback when incoming packet is received
+ *****************************************************************************/
+static void cpia2_usb_complete(struct urb *urb, struct pt_regs *regs)
+{
+ int i;
+ unsigned char *cdata;
+ static int frame_ready = false;
+ struct camera_data *cam = (struct camera_data *) urb->context;
+
+ if (urb->status!=0) {
+ if (!(urb->status == -ENOENT ||
+ urb->status == -ECONNRESET ||
+ urb->status == -ESHUTDOWN))
+ {
+ DBG("urb->status = %d!\n", urb->status);
+ }
+ DBG("Stopping streaming\n");
+ return;
+ }
+
+ if (!cam->streaming || !cam->present || cam->open_count == 0) {
+ LOG("Will now stop the streaming: streaming = %d, "
+ "present=%d, open_count=%d\n",
+ cam->streaming, cam->present, cam->open_count);
+ return;
+ }
+
+ /***
+ * Packet collater
+ ***/
+ //DBG("Collating %d packets\n", urb->number_of_packets);
+ for (i = 0; i < urb->number_of_packets; i++) {
+ u16 checksum, iso_checksum;
+ int j;
+ int n = urb->iso_frame_desc[i].actual_length;
+ int st = urb->iso_frame_desc[i].status;
+
+ if(cam->workbuff->status == FRAME_READY) {
+ struct framebuf *ptr;
+ /* Try to find an available buffer */
+ DBG("workbuff full, searching\n");
+ for (ptr = cam->workbuff->next;
+ ptr != cam->workbuff;
+ ptr = ptr->next)
+ {
+ if (ptr->status == FRAME_EMPTY) {
+ ptr->status = FRAME_READING;
+ ptr->length = 0;
+ break;
+ }
+ }
+ if (ptr == cam->workbuff)
+ break; /* No READING or EMPTY buffers left */
+
+ cam->workbuff = ptr;
+ }
+
+ if (cam->workbuff->status == FRAME_EMPTY ||
+ cam->workbuff->status == FRAME_ERROR) {
+ cam->workbuff->status = FRAME_READING;
+ cam->workbuff->length = 0;
+ }
+
+ //DBG(" Packet %d length = %d, status = %d\n", i, n, st);
+ cdata = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+
+ if (st) {
+ LOG("cpia2 data error: [%d] len=%d, status = %d\n",
+ i, n, st);
+ if(!ALLOW_CORRUPT)
+ cam->workbuff->status = FRAME_ERROR;
+ continue;
+ }
+
+ if(n<=2)
+ continue;
+
+ checksum = 0;
+ for(j=0; j<n-2; ++j)
+ checksum += cdata[j];
+ iso_checksum = cdata[j] + cdata[j+1]*256;
+ if(checksum != iso_checksum) {
+ LOG("checksum mismatch: [%d] len=%d, calculated = %x, checksum = %x\n",
+ i, n, (int)checksum, (int)iso_checksum);
+ if(!ALLOW_CORRUPT) {
+ cam->workbuff->status = FRAME_ERROR;
+ continue;
+ }
+ }
+ n -= 2;
+
+ if(cam->workbuff->status != FRAME_READING) {
+ if((0xFF == cdata[0] && 0xD8 == cdata[1]) ||
+ (0xD8 == cdata[0] && 0xFF == cdata[1] &&
+ 0 != cdata[2])) {
+ /* frame is skipped, but increment total
+ * frame count anyway */
+ cam->frame_count++;
+ }
+ DBG("workbuff not reading, status=%d\n",
+ cam->workbuff->status);
+ continue;
+ }
+
+ if (cam->frame_size < cam->workbuff->length + n) {
+ ERR("buffer overflow! length: %d, n: %d\n",
+ cam->workbuff->length, n);
+ cam->workbuff->status = FRAME_ERROR;
+ if(cam->workbuff->length > cam->workbuff->max_length)
+ cam->workbuff->max_length =
+ cam->workbuff->length;
+ continue;
+ }
+
+ if (cam->workbuff->length == 0) {
+ int data_offset;
+ if ((0xD8 == cdata[0]) && (0xFF == cdata[1])) {
+ data_offset = 1;
+ } else if((0xFF == cdata[0]) && (0xD8 == cdata[1])
+ && (0xFF == cdata[2])) {
+ data_offset = 2;
+ } else {
+ DBG("Ignoring packet, not beginning!\n");
+ continue;
+ }
+ DBG("Start of frame pattern found\n");
+ do_gettimeofday(&cam->workbuff->timestamp);
+ cam->workbuff->seq = cam->frame_count++;
+ cam->workbuff->data[0] = 0xFF;
+ cam->workbuff->data[1] = 0xD8;
+ cam->workbuff->length = 2;
+ add_APPn(cam);
+ add_COM(cam);
+ memcpy(cam->workbuff->data+cam->workbuff->length,
+ cdata+data_offset, n-data_offset);
+ cam->workbuff->length += n-data_offset;
+ } else if (cam->workbuff->length > 0) {
+ memcpy(cam->workbuff->data + cam->workbuff->length,
+ cdata, n);
+ cam->workbuff->length += n;
+ }
+
+ if ((cam->workbuff->length >= 3) &&
+ (cam->workbuff->data[cam->workbuff->length - 3] == 0xFF) &&
+ (cam->workbuff->data[cam->workbuff->length - 2] == 0xD9) &&
+ (cam->workbuff->data[cam->workbuff->length - 1] == 0xFF)) {
+ frame_ready = true;
+ cam->workbuff->data[cam->workbuff->length - 1] = 0;
+ cam->workbuff->length -= 1;
+ } else if ((cam->workbuff->length >= 2) &&
+ (cam->workbuff->data[cam->workbuff->length - 2] == 0xFF) &&
+ (cam->workbuff->data[cam->workbuff->length - 1] == 0xD9)) {
+ frame_ready = true;
+ }
+
+ if (frame_ready) {
+ DBG("Workbuff image size = %d\n",cam->workbuff->length);
+ process_frame(cam);
+
+ frame_ready = false;
+
+ if (waitqueue_active(&cam->wq_stream))
+ wake_up_interruptible(&cam->wq_stream);
+ }
+ }
+
+ if(cam->streaming) {
+ /* resubmit */
+ urb->dev = cam->dev;
+ if ((i = usb_submit_urb(urb, GFP_ATOMIC)) != 0)
+ ERR("%s: usb_submit_urb ret %d!\n", __func__, i);
+ }
+}
+
+/******************************************************************************
+ *
+ * configure_transfer_mode
+ *
+ *****************************************************************************/
+static int configure_transfer_mode(struct camera_data *cam, unsigned int alt)
+{
+ static unsigned char iso_regs[8][4] = {
+ {0x00, 0x00, 0x00, 0x00},
+ {0x00, 0x00, 0x00, 0x00},
+ {0xB9, 0x00, 0x00, 0x7E},
+ {0xB9, 0x00, 0x01, 0x7E},
+ {0xB9, 0x00, 0x02, 0x7E},
+ {0xB9, 0x00, 0x02, 0xFE},
+ {0xB9, 0x00, 0x03, 0x7E},
+ {0xB9, 0x00, 0x03, 0xFD}
+ };
+ struct cpia2_command cmd;
+ unsigned char reg;
+
+ if(!cam->present)
+ return -ENODEV;
+
+ /***
+ * Write the isoc registers according to the alternate selected
+ ***/
+ cmd.direction = TRANSFER_WRITE;
+ cmd.buffer.block_data[0] = iso_regs[alt][0];
+ cmd.buffer.block_data[1] = iso_regs[alt][1];
+ cmd.buffer.block_data[2] = iso_regs[alt][2];
+ cmd.buffer.block_data[3] = iso_regs[alt][3];
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC;
+ cmd.start = CPIA2_VC_USB_ISOLIM;
+ cmd.reg_count = 4;
+ cpia2_send_command(cam, &cmd);
+
+ /***
+ * Enable relevant streams before starting polling.
+ * First read USB Stream Config Register.
+ ***/
+ cmd.direction = TRANSFER_READ;
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC;
+ cmd.start = CPIA2_VC_USB_STRM;
+ cmd.reg_count = 1;
+ cpia2_send_command(cam, &cmd);
+ reg = cmd.buffer.block_data[0];
+
+ /* Clear iso, bulk, and int */
+ reg &= ~(CPIA2_VC_USB_STRM_BLK_ENABLE |
+ CPIA2_VC_USB_STRM_ISO_ENABLE |
+ CPIA2_VC_USB_STRM_INT_ENABLE);
+
+ if (alt == USBIF_BULK) {
+ DBG("Enabling bulk xfer\n");
+ reg |= CPIA2_VC_USB_STRM_BLK_ENABLE; /* Enable Bulk */
+ cam->xfer_mode = XFER_BULK;
+ } else if (alt >= USBIF_ISO_1) {
+ DBG("Enabling ISOC xfer\n");
+ reg |= CPIA2_VC_USB_STRM_ISO_ENABLE;
+ cam->xfer_mode = XFER_ISOC;
+ }
+
+ cmd.buffer.block_data[0] = reg;
+ cmd.direction = TRANSFER_WRITE;
+ cmd.start = CPIA2_VC_USB_STRM;
+ cmd.reg_count = 1;
+ cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC;
+ cpia2_send_command(cam, &cmd);
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * cpia2_usb_change_streaming_alternate
+ *
+ *****************************************************************************/
+int cpia2_usb_change_streaming_alternate(struct camera_data *cam,
+ unsigned int alt)
+{
+ int ret = 0;
+
+ if(alt < USBIF_ISO_1 || alt > USBIF_ISO_6)
+ return -EINVAL;
+
+ if(alt == cam->params.camera_state.stream_mode)
+ return 0;
+
+ cpia2_usb_stream_pause(cam);
+
+ configure_transfer_mode(cam, alt);
+
+ cam->params.camera_state.stream_mode = alt;
+
+ /* Reset the camera to prevent image quality degradation */
+ cpia2_reset_camera(cam);
+
+ cpia2_usb_stream_resume(cam);
+
+ return ret;
+}
+
+/******************************************************************************
+ *
+ * set_alternate
+ *
+ *****************************************************************************/
+int set_alternate(struct camera_data *cam, unsigned int alt)
+{
+ int ret = 0;
+
+ if(alt == cam->cur_alt)
+ return 0;
+
+ if (cam->cur_alt != USBIF_CMDONLY) {
+ DBG("Changing from alt %d to %d\n", cam->cur_alt, USBIF_CMDONLY);
+ ret = usb_set_interface(cam->dev, cam->iface, USBIF_CMDONLY);
+ if (ret != 0)
+ return ret;
+ }
+ if (alt != USBIF_CMDONLY) {
+ DBG("Changing from alt %d to %d\n", USBIF_CMDONLY, alt);
+ ret = usb_set_interface(cam->dev, cam->iface, alt);
+ if (ret != 0)
+ return ret;
+ }
+
+ cam->old_alt = cam->cur_alt;
+ cam->cur_alt = alt;
+
+ return ret;
+}
+
+/******************************************************************************
+ *
+ * free_sbufs
+ *
+ * Free all cam->sbuf[]. All non-NULL .data and .urb members that are non-NULL
+ * are assumed to be allocated. Non-NULL .urb members are also assumed to be
+ * submitted (and must therefore be killed before they are freed).
+ *****************************************************************************/
+static void free_sbufs(struct camera_data *cam)
+{
+ int i;
+
+ for (i = 0; i < NUM_SBUF; i++) {
+ if(cam->sbuf[i].urb) {
+ usb_kill_urb(cam->sbuf[i].urb);
+ usb_free_urb(cam->sbuf[i].urb);
+ cam->sbuf[i].urb = NULL;
+ }
+ if(cam->sbuf[i].data) {
+ kfree(cam->sbuf[i].data);
+ cam->sbuf[i].data = NULL;
+ }
+ }
+}
+
+/*******
+* Convenience functions
+*******/
+/****************************************************************************
+ *
+ * write_packet
+ *
+ ***************************************************************************/
+static int write_packet(struct usb_device *udev,
+ u8 request, u8 * registers, u16 start, size_t size)
+{
+ if (!registers || size <= 0)
+ return -EINVAL;
+
+ return usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ request,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ start, /* value */
+ 0, /* index */
+ registers, /* buffer */
+ size,
+ HZ);
+}
+
+/****************************************************************************
+ *
+ * read_packet
+ *
+ ***************************************************************************/
+static int read_packet(struct usb_device *udev,
+ u8 request, u8 * registers, u16 start, size_t size)
+{
+ if (!registers || size <= 0)
+ return -EINVAL;
+
+ return usb_control_msg(udev,
+ usb_rcvctrlpipe(udev, 0),
+ request,
+ USB_DIR_IN|USB_TYPE_VENDOR|USB_RECIP_DEVICE,
+ start, /* value */
+ 0, /* index */
+ registers, /* buffer */
+ size,
+ HZ);
+}
+
+/******************************************************************************
+ *
+ * cpia2_usb_transfer_cmd
+ *
+ *****************************************************************************/
+int cpia2_usb_transfer_cmd(struct camera_data *cam,
+ void *registers,
+ u8 request, u8 start, u8 count, u8 direction)
+{
+ int err = 0;
+ struct usb_device *udev = cam->dev;
+
+ if (!udev) {
+ ERR("%s: Internal driver error: udev is NULL\n", __func__);
+ return -EINVAL;
+ }
+
+ if (!registers) {
+ ERR("%s: Internal driver error: register array is NULL\n", __func__);
+ return -EINVAL;
+ }
+
+ if (direction == TRANSFER_READ) {
+ err = read_packet(udev, request, (u8 *)registers, start, count);
+ if (err > 0)
+ err = 0;
+ } else if (direction == TRANSFER_WRITE) {
+ err =write_packet(udev, request, (u8 *)registers, start, count);
+ if (err < 0) {
+ LOG("Control message failed, err val = %d\n", err);
+ LOG("Message: request = 0x%0X, start = 0x%0X\n",
+ request, start);
+ LOG("Message: count = %d, register[0] = 0x%0X\n",
+ count, ((unsigned char *) registers)[0]);
+ } else
+ err=0;
+ } else {
+ LOG("Unexpected first byte of direction: %d\n",
+ direction);
+ return -EINVAL;
+ }
+
+ if(err != 0)
+ LOG("Unexpected error: %d\n", err);
+ return err;
+}
+
+
+/******************************************************************************
+ *
+ * submit_urbs
+ *
+ *****************************************************************************/
+static int submit_urbs(struct camera_data *cam)
+{
+ struct urb *urb;
+ int fx, err, i;
+
+ for(i=0; i<NUM_SBUF; ++i) {
+ if (cam->sbuf[i].data)
+ continue;
+ cam->sbuf[i].data =
+ kmalloc(FRAMES_PER_DESC * FRAME_SIZE_PER_DESC, GFP_KERNEL);
+ if (!cam->sbuf[i].data) {
+ return -ENOMEM;
+ }
+ }
+
+ /* We double buffer the Isoc lists, and also know the polling
+ * interval is every frame (1 == (1 << (bInterval -1))).
+ */
+ for(i=0; i<NUM_SBUF; ++i) {
+ if(cam->sbuf[i].urb) {
+ continue;
+ }
+ urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
+ if (!urb) {
+ return -ENOMEM;
+ }
+
+ cam->sbuf[i].urb = urb;
+ urb->dev = cam->dev;
+ urb->context = cam;
+ urb->pipe = usb_rcvisocpipe(cam->dev, 1 /*ISOC endpoint*/);
+ urb->transfer_flags = URB_ISO_ASAP;
+ urb->transfer_buffer = cam->sbuf[i].data;
+ urb->complete = cpia2_usb_complete;
+ urb->number_of_packets = FRAMES_PER_DESC;
+ urb->interval = 1;
+ urb->transfer_buffer_length =
+ FRAME_SIZE_PER_DESC * FRAMES_PER_DESC;
+
+ for (fx = 0; fx < FRAMES_PER_DESC; fx++) {
+ urb->iso_frame_desc[fx].offset =
+ FRAME_SIZE_PER_DESC * fx;
+ urb->iso_frame_desc[fx].length = FRAME_SIZE_PER_DESC;
+ }
+ }
+
+
+ /* Queue the ISO urbs, and resubmit in the completion handler */
+ for(i=0; i<NUM_SBUF; ++i) {
+ err = usb_submit_urb(cam->sbuf[i].urb, GFP_KERNEL);
+ if (err) {
+ ERR("usb_submit_urb[%d]() = %d\n", i, err);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * cpia2_usb_stream_start
+ *
+ *****************************************************************************/
+int cpia2_usb_stream_start(struct camera_data *cam, unsigned int alternate)
+{
+ int ret;
+ int old_alt;
+
+ if(cam->streaming)
+ return 0;
+
+ if (cam->flush) {
+ int i;
+ DBG("Flushing buffers\n");
+ for(i=0; i<cam->num_frames; ++i) {
+ cam->buffers[i].status = FRAME_EMPTY;
+ cam->buffers[i].length = 0;
+ }
+ cam->curbuff = &cam->buffers[0];
+ cam->workbuff = cam->curbuff->next;
+ cam->flush = false;
+ }
+
+ old_alt = cam->params.camera_state.stream_mode;
+ cam->params.camera_state.stream_mode = 0;
+ ret = cpia2_usb_change_streaming_alternate(cam, alternate);
+ if (ret < 0) {
+ int ret2;
+ ERR("cpia2_usb_change_streaming_alternate() = %d!\n", ret);
+ cam->params.camera_state.stream_mode = old_alt;
+ ret2 = set_alternate(cam, USBIF_CMDONLY);
+ if (ret2 < 0) {
+ ERR("cpia2_usb_change_streaming_alternate(%d) =%d has already "
+ "failed. Then tried to call "
+ "set_alternate(USBIF_CMDONLY) = %d.\n",
+ alternate, ret, ret2);
+ }
+ } else {
+ cam->frame_count = 0;
+ cam->streaming = 1;
+ ret = cpia2_usb_stream_resume(cam);
+ }
+ return ret;
+}
+
+/******************************************************************************
+ *
+ * cpia2_usb_stream_pause
+ *
+ *****************************************************************************/
+int cpia2_usb_stream_pause(struct camera_data *cam)
+{
+ int ret = 0;
+ if(cam->streaming) {
+ ret = set_alternate(cam, USBIF_CMDONLY);
+ free_sbufs(cam);
+ }
+ return ret;
+}
+
+/******************************************************************************
+ *
+ * cpia2_usb_stream_resume
+ *
+ *****************************************************************************/
+int cpia2_usb_stream_resume(struct camera_data *cam)
+{
+ int ret = 0;
+ if(cam->streaming) {
+ cam->first_image_seen = 0;
+ ret = set_alternate(cam, cam->params.camera_state.stream_mode);
+ if(ret == 0) {
+ ret = submit_urbs(cam);
+ }
+ }
+ return ret;
+}
+
+/******************************************************************************
+ *
+ * cpia2_usb_stream_stop
+ *
+ *****************************************************************************/
+int cpia2_usb_stream_stop(struct camera_data *cam)
+{
+ int ret;
+ ret = cpia2_usb_stream_pause(cam);
+ cam->streaming = 0;
+ configure_transfer_mode(cam, 0);
+ return ret;
+}
+
+/******************************************************************************
+ *
+ * cpia2_usb_probe
+ *
+ * Probe and initialize.
+ *****************************************************************************/
+static int cpia2_usb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct usb_interface_descriptor *interface;
+ struct camera_data *cam;
+ int ret;
+
+ /* A multi-config CPiA2 camera? */
+ if (udev->descriptor.bNumConfigurations != 1)
+ return -ENODEV;
+ interface = &intf->cur_altsetting->desc;
+
+ /* If we get to this point, we found a CPiA2 camera */
+ LOG("CPiA2 USB camera found\n");
+
+ if((cam = cpia2_init_camera_struct()) == NULL)
+ return -ENOMEM;
+
+ cam->dev = udev;
+ cam->iface = interface->bInterfaceNumber;
+
+ ret = set_alternate(cam, USBIF_CMDONLY);
+ if (ret < 0) {
+ ERR("%s: usb_set_interface error (ret = %d)\n", __func__, ret);
+ kfree(cam);
+ return ret;
+ }
+
+ if ((ret = cpia2_register_camera(cam)) < 0) {
+ ERR("%s: Failed to register cpia2 camera (ret = %d)\n", __func__, ret);
+ kfree(cam);
+ return ret;
+ }
+
+
+ if((ret = cpia2_init_camera(cam)) < 0) {
+ ERR("%s: failed to initialize cpia2 camera (ret = %d)\n", __func__, ret);
+ cpia2_unregister_camera(cam);
+ kfree(cam);
+ return ret;
+ }
+ LOG(" CPiA Version: %d.%02d (%d.%d)\n",
+ cam->params.version.firmware_revision_hi,
+ cam->params.version.firmware_revision_lo,
+ cam->params.version.asic_id,
+ cam->params.version.asic_rev);
+ LOG(" CPiA PnP-ID: %04x:%04x:%04x\n",
+ cam->params.pnp_id.vendor,
+ cam->params.pnp_id.product,
+ cam->params.pnp_id.device_revision);
+ LOG(" SensorID: %d.(version %d)\n",
+ cam->params.version.sensor_flags,
+ cam->params.version.sensor_rev);
+
+ usb_set_intfdata(intf, cam);
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * cpia2_disconnect
+ *
+ *****************************************************************************/
+static void cpia2_usb_disconnect(struct usb_interface *intf)
+{
+ struct camera_data *cam = usb_get_intfdata(intf);
+ usb_set_intfdata(intf, NULL);
+ cam->present = 0;
+
+ DBG("Stopping stream\n");
+ cpia2_usb_stream_stop(cam);
+
+ DBG("Unregistering camera\n");
+ cpia2_unregister_camera(cam);
+
+ if(cam->buffers) {
+ DBG("Wakeup waiting processes\n");
+ cam->curbuff->status = FRAME_READY;
+ cam->curbuff->length = 0;
+ if (waitqueue_active(&cam->wq_stream))
+ wake_up_interruptible(&cam->wq_stream);
+ }
+
+ DBG("Releasing interface\n");
+ usb_driver_release_interface(&cpia2_driver, intf);
+
+ if (cam->open_count == 0) {
+ DBG("Freeing camera structure\n");
+ kfree(cam);
+ }
+
+ LOG("CPiA2 camera disconnected.\n");
+}
+
+
+/******************************************************************************
+ *
+ * usb_cpia2_init
+ *
+ *****************************************************************************/
+int cpia2_usb_init(void)
+{
+ return usb_register(&cpia2_driver);
+}
+
+/******************************************************************************
+ *
+ * usb_cpia_cleanup
+ *
+ *****************************************************************************/
+void cpia2_usb_cleanup(void)
+{
+ schedule_timeout(2 * HZ);
+ usb_deregister(&cpia2_driver);
+}
diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c
new file mode 100644
index 00000000000..3480a2ca7cd
--- /dev/null
+++ b/drivers/media/video/cpia2/cpia2_v4l.c
@@ -0,0 +1,2104 @@
+/****************************************************************************
+ *
+ * Filename: cpia2_v4l.c
+ *
+ * Copyright 2001, STMicrolectronics, Inc.
+ * Contact: steve.miller@st.com
+ * Copyright 2001,2005, Scott J. Bertin <scottbertin@yahoo.com>
+ *
+ * Description:
+ * This is a USB driver for CPia2 based video cameras.
+ * The infrastructure of this driver is based on the cpia usb driver by
+ * Jochen Scharrlach and Johannes Erdfeldt.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Stripped of 2.4 stuff ready for main kernel submit by
+ * Alan Cox <alan@redhat.com>
+ ****************************************************************************/
+
+#include <linux/version.h>
+
+#include <linux/config.h>
+
+#include <linux/module.h>
+#include <linux/time.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+
+#include "cpia2.h"
+#include "cpia2dev.h"
+
+
+//#define _CPIA2_DEBUG_
+
+#define MAKE_STRING_1(x) #x
+#define MAKE_STRING(x) MAKE_STRING_1(x)
+
+static int video_nr = -1;
+module_param(video_nr, int, 0);
+MODULE_PARM_DESC(video_nr,"video device to register (0=/dev/video0, etc)");
+
+static int buffer_size = 68*1024;
+module_param(buffer_size, int, 0);
+MODULE_PARM_DESC(buffer_size, "Size for each frame buffer in bytes (default 68k)");
+
+static int num_buffers = 3;
+module_param(num_buffers, int, 0);
+MODULE_PARM_DESC(num_buffers, "Number of frame buffers (1-"
+ MAKE_STRING(VIDEO_MAX_FRAME) ", default 3)");
+
+static int alternate = DEFAULT_ALT;
+module_param(alternate, int, 0);
+MODULE_PARM_DESC(alternate, "USB Alternate (" MAKE_STRING(USBIF_ISO_1) "-"
+ MAKE_STRING(USBIF_ISO_6) ", default "
+ MAKE_STRING(DEFAULT_ALT) ")");
+
+static int flicker_freq = 60;
+module_param(flicker_freq, int, 0);
+MODULE_PARM_DESC(flicker_freq, "Flicker frequency (" MAKE_STRING(50) "or"
+ MAKE_STRING(60) ", default "
+ MAKE_STRING(60) ")");
+
+static int flicker_mode = NEVER_FLICKER;
+module_param(flicker_mode, int, 0);
+MODULE_PARM_DESC(flicker_mode,
+ "Flicker supression (" MAKE_STRING(NEVER_FLICKER) "or"
+ MAKE_STRING(ANTI_FLICKER_ON) ", default "
+ MAKE_STRING(NEVER_FLICKER) ")");
+
+MODULE_AUTHOR("Steve Miller (STMicroelectronics) <steve.miller@st.com>");
+MODULE_DESCRIPTION("V4L-driver for STMicroelectronics CPiA2 based cameras");
+MODULE_SUPPORTED_DEVICE("video");
+MODULE_LICENSE("GPL");
+
+#define ABOUT "V4L-Driver for Vision CPiA2 based cameras"
+
+#ifndef VID_HARDWARE_CPIA2
+#error "VID_HARDWARE_CPIA2 should have been defined in linux/videodev.h"
+#endif
+
+struct control_menu_info {
+ int value;
+ char name[32];
+};
+
+static struct control_menu_info framerate_controls[] =
+{
+ { CPIA2_VP_FRAMERATE_6_25, "6.25 fps" },
+ { CPIA2_VP_FRAMERATE_7_5, "7.5 fps" },
+ { CPIA2_VP_FRAMERATE_12_5, "12.5 fps" },
+ { CPIA2_VP_FRAMERATE_15, "15 fps" },
+ { CPIA2_VP_FRAMERATE_25, "25 fps" },
+ { CPIA2_VP_FRAMERATE_30, "30 fps" },
+};
+#define NUM_FRAMERATE_CONTROLS (sizeof(framerate_controls)/sizeof(framerate_controls[0]))
+
+static struct control_menu_info flicker_controls[] =
+{
+ { NEVER_FLICKER, "Off" },
+ { FLICKER_50, "50 Hz" },
+ { FLICKER_60, "60 Hz" },
+};
+#define NUM_FLICKER_CONTROLS (sizeof(flicker_controls)/sizeof(flicker_controls[0]))
+
+static struct control_menu_info lights_controls[] =
+{
+ { 0, "Off" },
+ { 64, "Top" },
+ { 128, "Bottom" },
+ { 192, "Both" },
+};
+#define NUM_LIGHTS_CONTROLS (sizeof(lights_controls)/sizeof(lights_controls[0]))
+#define GPIO_LIGHTS_MASK 192
+
+static struct v4l2_queryctrl controls[] = {
+ {
+ .id = V4L2_CID_BRIGHTNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Brightness",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 1,
+ .default_value = DEFAULT_BRIGHTNESS,
+ },
+ {
+ .id = V4L2_CID_CONTRAST,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Contrast",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 1,
+ .default_value = DEFAULT_CONTRAST,
+ },
+ {
+ .id = V4L2_CID_SATURATION,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Saturation",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 1,
+ .default_value = DEFAULT_SATURATION,
+ },
+ {
+ .id = V4L2_CID_HFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Mirror Horizontally",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+ .default_value = 0,
+ },
+ {
+ .id = V4L2_CID_VFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Flip Vertically",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+ .default_value = 0,
+ },
+ {
+ .id = CPIA2_CID_TARGET_KB,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Target KB",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 1,
+ .default_value = DEFAULT_TARGET_KB,
+ },
+ {
+ .id = CPIA2_CID_GPIO,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "GPIO",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 1,
+ .default_value = 0,
+ },
+ {
+ .id = CPIA2_CID_FLICKER_MODE,
+ .type = V4L2_CTRL_TYPE_MENU,
+ .name = "Flicker Reduction",
+ .minimum = 0,
+ .maximum = NUM_FLICKER_CONTROLS-1,
+ .step = 1,
+ .default_value = 0,
+ },
+ {
+ .id = CPIA2_CID_FRAMERATE,
+ .type = V4L2_CTRL_TYPE_MENU,
+ .name = "Framerate",
+ .minimum = 0,
+ .maximum = NUM_FRAMERATE_CONTROLS-1,
+ .step = 1,
+ .default_value = NUM_FRAMERATE_CONTROLS-1,
+ },
+ {
+ .id = CPIA2_CID_USB_ALT,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "USB Alternate",
+ .minimum = USBIF_ISO_1,
+ .maximum = USBIF_ISO_6,
+ .step = 1,
+ .default_value = DEFAULT_ALT,
+ },
+ {
+ .id = CPIA2_CID_LIGHTS,
+ .type = V4L2_CTRL_TYPE_MENU,
+ .name = "Lights",
+ .minimum = 0,
+ .maximum = NUM_LIGHTS_CONTROLS-1,
+ .step = 1,
+ .default_value = 0,
+ },
+ {
+ .id = CPIA2_CID_RESET_CAMERA,
+ .type = V4L2_CTRL_TYPE_BUTTON,
+ .name = "Reset Camera",
+ .minimum = 0,
+ .maximum = 0,
+ .step = 0,
+ .default_value = 0,
+ },
+};
+#define NUM_CONTROLS (sizeof(controls)/sizeof(controls[0]))
+
+
+/******************************************************************************
+ *
+ * cpia2_open
+ *
+ *****************************************************************************/
+static int cpia2_open(struct inode *inode, struct file *file)
+{
+ struct video_device *dev = video_devdata(file);
+ struct camera_data *cam = video_get_drvdata(dev);
+ int retval = 0;
+
+ if (!cam) {
+ ERR("Internal error, camera_data not found!\n");
+ return -ENODEV;
+ }
+
+ if(down_interruptible(&cam->busy_lock))
+ return -ERESTARTSYS;
+
+ if(!cam->present) {
+ retval = -ENODEV;
+ goto err_return;
+ }
+
+ if (cam->open_count > 0) {
+ goto skip_init;
+ }
+
+ if (cpia2_allocate_buffers(cam)) {
+ retval = -ENOMEM;
+ goto err_return;
+ }
+
+ /* reset the camera */
+ if (cpia2_reset_camera(cam) < 0) {
+ retval = -EIO;
+ goto err_return;
+ }
+
+ cam->APP_len = 0;
+ cam->COM_len = 0;
+
+skip_init:
+ {
+ struct cpia2_fh *fh = kmalloc(sizeof(*fh),GFP_KERNEL);
+ if(!fh) {
+ retval = -ENOMEM;
+ goto err_return;
+ }
+ file->private_data = fh;
+ fh->prio = V4L2_PRIORITY_UNSET;
+ v4l2_prio_open(&cam->prio, &fh->prio);
+ fh->mmapped = 0;
+ }
+
+ ++cam->open_count;
+
+ cpia2_dbg_dump_registers(cam);
+
+err_return:
+ up(&cam->busy_lock);
+ return retval;
+}
+
+/******************************************************************************
+ *
+ * cpia2_close
+ *
+ *****************************************************************************/
+static int cpia2_close(struct inode *inode, struct file *file)
+{
+ struct video_device *dev = video_devdata(file);
+ struct camera_data *cam = video_get_drvdata(dev);
+ struct cpia2_fh *fh = file->private_data;
+
+ down(&cam->busy_lock);
+
+ if (cam->present &&
+ (cam->open_count == 1
+ || fh->prio == V4L2_PRIORITY_RECORD
+ )) {
+ cpia2_usb_stream_stop(cam);
+
+ if(cam->open_count == 1) {
+ /* save camera state for later open */
+ cpia2_save_camera_state(cam);
+
+ cpia2_set_low_power(cam);
+ cpia2_free_buffers(cam);
+ }
+ }
+
+ {
+ if(fh->mmapped)
+ cam->mmapped = 0;
+ v4l2_prio_close(&cam->prio,&fh->prio);
+ file->private_data = NULL;
+ kfree(fh);
+ }
+
+ if (--cam->open_count == 0) {
+ cpia2_free_buffers(cam);
+ if (!cam->present) {
+ video_unregister_device(dev);
+ kfree(cam);
+ }
+ }
+
+ up(&cam->busy_lock);
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * cpia2_v4l_read
+ *
+ *****************************************************************************/
+static ssize_t cpia2_v4l_read(struct file *file, char __user *buf, size_t count,
+ loff_t *off)
+{
+ struct video_device *dev = video_devdata(file);
+ struct camera_data *cam = video_get_drvdata(dev);
+ int noblock = file->f_flags&O_NONBLOCK;
+
+ struct cpia2_fh *fh = file->private_data;
+
+ if(!cam)
+ return -EINVAL;
+
+ /* Priority check */
+ if(fh->prio != V4L2_PRIORITY_RECORD) {
+ return -EBUSY;
+ }
+
+ return cpia2_read(cam, buf, count, noblock);
+}
+
+
+/******************************************************************************
+ *
+ * cpia2_v4l_poll
+ *
+ *****************************************************************************/
+static unsigned int cpia2_v4l_poll(struct file *filp, struct poll_table_struct *wait)
+{
+ struct video_device *dev = video_devdata(filp);
+ struct camera_data *cam = video_get_drvdata(dev);
+
+ struct cpia2_fh *fh = filp->private_data;
+
+ if(!cam)
+ return POLLERR;
+
+ /* Priority check */
+ if(fh->prio != V4L2_PRIORITY_RECORD) {
+ return POLLERR;
+ }
+
+ return cpia2_poll(cam, filp, wait);
+}
+
+
+/******************************************************************************
+ *
+ * ioctl_cap_query
+ *
+ *****************************************************************************/
+static int ioctl_cap_query(void *arg, struct camera_data *cam)
+{
+ struct video_capability *vc;
+ int retval = 0;
+ vc = arg;
+
+ if (cam->params.pnp_id.product == 0x151)
+ strcpy(vc->name, "QX5 Microscope");
+ else
+ strcpy(vc->name, "CPiA2 Camera");
+
+ vc->type = VID_TYPE_CAPTURE | VID_TYPE_MJPEG_ENCODER;
+ vc->channels = 1;
+ vc->audios = 0;
+ vc->minwidth = 176; /* VIDEOSIZE_QCIF */
+ vc->minheight = 144;
+ switch (cam->params.version.sensor_flags) {
+ case CPIA2_VP_SENSOR_FLAGS_500:
+ vc->maxwidth = STV_IMAGE_VGA_COLS;
+ vc->maxheight = STV_IMAGE_VGA_ROWS;
+ break;
+ case CPIA2_VP_SENSOR_FLAGS_410:
+ vc->maxwidth = STV_IMAGE_CIF_COLS;
+ vc->maxheight = STV_IMAGE_CIF_ROWS;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return retval;
+}
+
+/******************************************************************************
+ *
+ * ioctl_get_channel
+ *
+ *****************************************************************************/
+static int ioctl_get_channel(void *arg)
+{
+ int retval = 0;
+ struct video_channel *v;
+ v = arg;
+
+ if (v->channel != 0)
+ return -EINVAL;
+
+ v->channel = 0;
+ strcpy(v->name, "Camera");
+ v->tuners = 0;
+ v->flags = 0;
+ v->type = VIDEO_TYPE_CAMERA;
+ v->norm = 0;
+
+ return retval;
+}
+
+/******************************************************************************
+ *
+ * ioctl_set_channel
+ *
+ *****************************************************************************/
+static int ioctl_set_channel(void *arg)
+{
+ struct video_channel *v;
+ int retval = 0;
+ v = arg;
+
+ if (retval == 0 && v->channel != 0)
+ retval = -EINVAL;
+
+ return retval;
+}
+
+/******************************************************************************
+ *
+ * ioctl_set_image_prop
+ *
+ *****************************************************************************/
+static int ioctl_set_image_prop(void *arg, struct camera_data *cam)
+{
+ struct video_picture *vp;
+ int retval = 0;
+ vp = arg;
+
+ /* brightness, color, contrast need no check 0-65535 */
+ memcpy(&cam->vp, vp, sizeof(*vp));
+
+ /* update cam->params.colorParams */
+ cam->params.color_params.brightness = vp->brightness / 256;
+ cam->params.color_params.saturation = vp->colour / 256;
+ cam->params.color_params.contrast = vp->contrast / 256;
+
+ DBG("Requested params: bright 0x%X, sat 0x%X, contrast 0x%X\n",
+ cam->params.color_params.brightness,
+ cam->params.color_params.saturation,
+ cam->params.color_params.contrast);
+
+ cpia2_set_color_params(cam);
+
+ return retval;
+}
+
+static int sync(struct camera_data *cam, int frame_nr)
+{
+ struct framebuf *frame = &cam->buffers[frame_nr];
+
+ while (1) {
+ if (frame->status == FRAME_READY)
+ return 0;
+
+ if (!cam->streaming) {
+ frame->status = FRAME_READY;
+ frame->length = 0;
+ return 0;
+ }
+
+ up(&cam->busy_lock);
+ wait_event_interruptible(cam->wq_stream,
+ !cam->streaming ||
+ frame->status == FRAME_READY);
+ down(&cam->busy_lock);
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+ if(!cam->present)
+ return -ENOTTY;
+ }
+}
+
+/******************************************************************************
+ *
+ * ioctl_set_window_size
+ *
+ *****************************************************************************/
+static int ioctl_set_window_size(void *arg, struct camera_data *cam,
+ struct cpia2_fh *fh)
+{
+ /* copy_from_user, check validity, copy to internal structure */
+ struct video_window *vw;
+ int frame, err;
+ vw = arg;
+
+ if (vw->clipcount != 0) /* clipping not supported */
+ return -EINVAL;
+
+ if (vw->clips != NULL) /* clipping not supported */
+ return -EINVAL;
+
+ /* Ensure that only this process can change the format. */
+ err = v4l2_prio_change(&cam->prio, &fh->prio, V4L2_PRIORITY_RECORD);
+ if(err != 0)
+ return err;
+
+ cam->pixelformat = V4L2_PIX_FMT_JPEG;
+
+ /* Be sure to supply the Huffman tables, this isn't MJPEG */
+ cam->params.compression.inhibit_htables = 0;
+
+ /* we set the video window to something smaller or equal to what
+ * is requested by the user???
+ */
+ DBG("Requested width = %d, height = %d\n", vw->width, vw->height);
+ if (vw->width != cam->vw.width || vw->height != cam->vw.height) {
+ cam->vw.width = vw->width;
+ cam->vw.height = vw->height;
+ cam->params.roi.width = vw->width;
+ cam->params.roi.height = vw->height;
+ cpia2_set_format(cam);
+ }
+
+ for (frame = 0; frame < cam->num_frames; ++frame) {
+ if (cam->buffers[frame].status == FRAME_READING)
+ if ((err = sync(cam, frame)) < 0)
+ return err;
+
+ cam->buffers[frame].status = FRAME_EMPTY;
+ }
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * ioctl_get_mbuf
+ *
+ *****************************************************************************/
+static int ioctl_get_mbuf(void *arg, struct camera_data *cam)
+{
+ struct video_mbuf *vm;
+ int i;
+ vm = arg;
+
+ memset(vm, 0, sizeof(*vm));
+ vm->size = cam->frame_size*cam->num_frames;
+ vm->frames = cam->num_frames;
+ for (i = 0; i < cam->num_frames; i++)
+ vm->offsets[i] = cam->frame_size * i;
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * ioctl_mcapture
+ *
+ *****************************************************************************/
+static int ioctl_mcapture(void *arg, struct camera_data *cam,
+ struct cpia2_fh *fh)
+{
+ struct video_mmap *vm;
+ int video_size, err;
+ vm = arg;
+
+ if (vm->frame < 0 || vm->frame >= cam->num_frames)
+ return -EINVAL;
+
+ /* set video size */
+ video_size = cpia2_match_video_size(vm->width, vm->height);
+ if (cam->video_size < 0) {
+ return -EINVAL;
+ }
+
+ /* Ensure that only this process can change the format. */
+ err = v4l2_prio_change(&cam->prio, &fh->prio, V4L2_PRIORITY_RECORD);
+ if(err != 0)
+ return err;
+
+ if (video_size != cam->video_size) {
+ cam->video_size = video_size;
+ cam->params.roi.width = vm->width;
+ cam->params.roi.height = vm->height;
+ cpia2_set_format(cam);
+ }
+
+ if (cam->buffers[vm->frame].status == FRAME_READING)
+ if ((err=sync(cam, vm->frame)) < 0)
+ return err;
+
+ cam->buffers[vm->frame].status = FRAME_EMPTY;
+
+ return cpia2_usb_stream_start(cam,cam->params.camera_state.stream_mode);
+}
+
+/******************************************************************************
+ *
+ * ioctl_sync
+ *
+ *****************************************************************************/
+static int ioctl_sync(void *arg, struct camera_data *cam)
+{
+ int frame;
+
+ frame = *(int*)arg;
+
+ if (frame < 0 || frame >= cam->num_frames)
+ return -EINVAL;
+
+ return sync(cam, frame);
+}
+
+
+/******************************************************************************
+ *
+ * ioctl_set_gpio
+ *
+ *****************************************************************************/
+
+static int ioctl_set_gpio(void *arg, struct camera_data *cam)
+{
+ __u32 gpio_val;
+
+ gpio_val = *(__u32*) arg;
+
+ if (gpio_val &~ 0xFFU)
+ return -EINVAL;
+
+ return cpia2_set_gpio(cam, (unsigned char)gpio_val);
+}
+
+/******************************************************************************
+ *
+ * ioctl_querycap
+ *
+ * V4L2 device capabilities
+ *
+ *****************************************************************************/
+
+static int ioctl_querycap(void *arg, struct camera_data *cam)
+{
+ struct v4l2_capability *vc = arg;
+
+ memset(vc, 0, sizeof(*vc));
+ strcpy(vc->driver, "cpia2");
+
+ if (cam->params.pnp_id.product == 0x151)
+ strcpy(vc->card, "QX5 Microscope");
+ else
+ strcpy(vc->card, "CPiA2 Camera");
+ switch (cam->params.pnp_id.device_type) {
+ case DEVICE_STV_672:
+ strcat(vc->card, " (672/");
+ break;
+ case DEVICE_STV_676:
+ strcat(vc->card, " (676/");
+ break;
+ default:
+ strcat(vc->card, " (???/");
+ break;
+ }
+ switch (cam->params.version.sensor_flags) {
+ case CPIA2_VP_SENSOR_FLAGS_404:
+ strcat(vc->card, "404)");
+ break;
+ case CPIA2_VP_SENSOR_FLAGS_407:
+ strcat(vc->card, "407)");
+ break;
+ case CPIA2_VP_SENSOR_FLAGS_409:
+ strcat(vc->card, "409)");
+ break;
+ case CPIA2_VP_SENSOR_FLAGS_410:
+ strcat(vc->card, "410)");
+ break;
+ case CPIA2_VP_SENSOR_FLAGS_500:
+ strcat(vc->card, "500)");
+ break;
+ default:
+ strcat(vc->card, "???)");
+ break;
+ }
+
+ if (usb_make_path(cam->dev, vc->bus_info, sizeof(vc->bus_info)) <0)
+ memset(vc->bus_info,0, sizeof(vc->bus_info));
+
+ vc->version = KERNEL_VERSION(CPIA2_MAJ_VER, CPIA2_MIN_VER,
+ CPIA2_PATCH_VER);
+
+ vc->capabilities = V4L2_CAP_VIDEO_CAPTURE |
+ V4L2_CAP_READWRITE |
+ V4L2_CAP_STREAMING;
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * ioctl_input
+ *
+ * V4L2 input get/set/enumerate
+ *
+ *****************************************************************************/
+
+static int ioctl_input(unsigned int ioclt_nr,void *arg,struct camera_data *cam)
+{
+ struct v4l2_input *i = arg;
+
+ if(ioclt_nr != VIDIOC_G_INPUT) {
+ if (i->index != 0)
+ return -EINVAL;
+ }
+
+ memset(i, 0, sizeof(*i));
+ strcpy(i->name, "Camera");
+ i->type = V4L2_INPUT_TYPE_CAMERA;
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * ioctl_enum_fmt
+ *
+ * V4L2 format enumerate
+ *
+ *****************************************************************************/
+
+static int ioctl_enum_fmt(void *arg,struct camera_data *cam)
+{
+ struct v4l2_fmtdesc *f = arg;
+ int index = f->index;
+
+ if (index < 0 || index > 1)
+ return -EINVAL;
+
+ memset(f, 0, sizeof(*f));
+ f->index = index;
+ f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ f->flags = V4L2_FMT_FLAG_COMPRESSED;
+ switch(index) {
+ case 0:
+ strcpy(f->description, "MJPEG");
+ f->pixelformat = V4L2_PIX_FMT_MJPEG;
+ break;
+ case 1:
+ strcpy(f->description, "JPEG");
+ f->pixelformat = V4L2_PIX_FMT_JPEG;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * ioctl_try_fmt
+ *
+ * V4L2 format try
+ *
+ *****************************************************************************/
+
+static int ioctl_try_fmt(void *arg,struct camera_data *cam)
+{
+ struct v4l2_format *f = arg;
+
+ if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (f->fmt.pix.pixelformat != V4L2_PIX_FMT_MJPEG &&
+ f->fmt.pix.pixelformat != V4L2_PIX_FMT_JPEG)
+ return -EINVAL;
+
+ f->fmt.pix.field = V4L2_FIELD_NONE;
+ f->fmt.pix.bytesperline = 0;
+ f->fmt.pix.sizeimage = cam->frame_size;
+ f->fmt.pix.colorspace = V4L2_COLORSPACE_JPEG;
+ f->fmt.pix.priv = 0;
+
+ switch (cpia2_match_video_size(f->fmt.pix.width, f->fmt.pix.height)) {
+ case VIDEOSIZE_VGA:
+ f->fmt.pix.width = 640;
+ f->fmt.pix.height = 480;
+ break;
+ case VIDEOSIZE_CIF:
+ f->fmt.pix.width = 352;
+ f->fmt.pix.height = 288;
+ break;
+ case VIDEOSIZE_QVGA:
+ f->fmt.pix.width = 320;
+ f->fmt.pix.height = 240;
+ break;
+ case VIDEOSIZE_288_216:
+ f->fmt.pix.width = 288;
+ f->fmt.pix.height = 216;
+ break;
+ case VIDEOSIZE_256_192:
+ f->fmt.pix.width = 256;
+ f->fmt.pix.height = 192;
+ break;
+ case VIDEOSIZE_224_168:
+ f->fmt.pix.width = 224;
+ f->fmt.pix.height = 168;
+ break;
+ case VIDEOSIZE_192_144:
+ f->fmt.pix.width = 192;
+ f->fmt.pix.height = 144;
+ break;
+ case VIDEOSIZE_QCIF:
+ default:
+ f->fmt.pix.width = 176;
+ f->fmt.pix.height = 144;
+ break;
+ }
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * ioctl_set_fmt
+ *
+ * V4L2 format set
+ *
+ *****************************************************************************/
+
+static int ioctl_set_fmt(void *arg,struct camera_data *cam, struct cpia2_fh *fh)
+{
+ struct v4l2_format *f = arg;
+ int err, frame;
+
+ err = ioctl_try_fmt(arg, cam);
+ if(err != 0)
+ return err;
+
+ /* Ensure that only this process can change the format. */
+ err = v4l2_prio_change(&cam->prio, &fh->prio, V4L2_PRIORITY_RECORD);
+ if(err != 0) {
+ return err;
+ }
+
+ cam->pixelformat = f->fmt.pix.pixelformat;
+
+ /* NOTE: This should be set to 1 for MJPEG, but some apps don't handle
+ * the missing Huffman table properly. */
+ cam->params.compression.inhibit_htables = 0;
+ /*f->fmt.pix.pixelformat == V4L2_PIX_FMT_MJPEG;*/
+
+ /* we set the video window to something smaller or equal to what
+ * is requested by the user???
+ */
+ DBG("Requested width = %d, height = %d\n",
+ f->fmt.pix.width, f->fmt.pix.height);
+ if (f->fmt.pix.width != cam->vw.width ||
+ f->fmt.pix.height != cam->vw.height) {
+ cam->vw.width = f->fmt.pix.width;
+ cam->vw.height = f->fmt.pix.height;
+ cam->params.roi.width = f->fmt.pix.width;
+ cam->params.roi.height = f->fmt.pix.height;
+ cpia2_set_format(cam);
+ }
+
+ for (frame = 0; frame < cam->num_frames; ++frame) {
+ if (cam->buffers[frame].status == FRAME_READING)
+ if ((err = sync(cam, frame)) < 0)
+ return err;
+
+ cam->buffers[frame].status = FRAME_EMPTY;
+ }
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * ioctl_get_fmt
+ *
+ * V4L2 format get
+ *
+ *****************************************************************************/
+
+static int ioctl_get_fmt(void *arg,struct camera_data *cam)
+{
+ struct v4l2_format *f = arg;
+
+ if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ f->fmt.pix.width = cam->vw.width;
+ f->fmt.pix.height = cam->vw.height;
+ f->fmt.pix.pixelformat = cam->pixelformat;
+ f->fmt.pix.field = V4L2_FIELD_NONE;
+ f->fmt.pix.bytesperline = 0;
+ f->fmt.pix.sizeimage = cam->frame_size;
+ f->fmt.pix.colorspace = V4L2_COLORSPACE_JPEG;
+ f->fmt.pix.priv = 0;
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * ioctl_cropcap
+ *
+ * V4L2 query cropping capabilities
+ * NOTE: cropping is currently disabled
+ *
+ *****************************************************************************/
+
+static int ioctl_cropcap(void *arg,struct camera_data *cam)
+{
+ struct v4l2_cropcap *c = arg;
+
+ if (c->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ c->bounds.left = 0;
+ c->bounds.top = 0;
+ c->bounds.width = cam->vw.width;
+ c->bounds.height = cam->vw.height;
+ c->defrect.left = 0;
+ c->defrect.top = 0;
+ c->defrect.width = cam->vw.width;
+ c->defrect.height = cam->vw.height;
+ c->pixelaspect.numerator = 1;
+ c->pixelaspect.denominator = 1;
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * ioctl_queryctrl
+ *
+ * V4L2 query possible control variables
+ *
+ *****************************************************************************/
+
+static int ioctl_queryctrl(void *arg,struct camera_data *cam)
+{
+ struct v4l2_queryctrl *c = arg;
+ int i;
+
+ for(i=0; i<NUM_CONTROLS; ++i) {
+ if(c->id == controls[i].id) {
+ memcpy(c, controls+i, sizeof(*c));
+ break;
+ }
+ }
+
+ if(i == NUM_CONTROLS)
+ return -EINVAL;
+
+ /* Some devices have additional limitations */
+ switch(c->id) {
+ case V4L2_CID_BRIGHTNESS:
+ /***
+ * Don't let the register be set to zero - bug in VP4
+ * flash of full brightness
+ ***/
+ if (cam->params.pnp_id.device_type == DEVICE_STV_672)
+ c->minimum = 1;
+ break;
+ case V4L2_CID_VFLIP:
+ // VP5 Only
+ if(cam->params.pnp_id.device_type == DEVICE_STV_672)
+ c->flags |= V4L2_CTRL_FLAG_DISABLED;
+ break;
+ case CPIA2_CID_FRAMERATE:
+ if(cam->params.pnp_id.device_type == DEVICE_STV_672 &&
+ cam->params.version.sensor_flags==CPIA2_VP_SENSOR_FLAGS_500){
+ // Maximum 15fps
+ int i;
+ for(i=0; i<c->maximum; ++i) {
+ if(framerate_controls[i].value ==
+ CPIA2_VP_FRAMERATE_15) {
+ c->maximum = i;
+ c->default_value = i;
+ }
+ }
+ }
+ break;
+ case CPIA2_CID_FLICKER_MODE:
+ // Flicker control only valid for 672.
+ if(cam->params.pnp_id.device_type != DEVICE_STV_672)
+ c->flags |= V4L2_CTRL_FLAG_DISABLED;
+ break;
+ case CPIA2_CID_LIGHTS:
+ // Light control only valid for the QX5 Microscope.
+ if(cam->params.pnp_id.product != 0x151)
+ c->flags |= V4L2_CTRL_FLAG_DISABLED;
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * ioctl_querymenu
+ *
+ * V4L2 query possible control variables
+ *
+ *****************************************************************************/
+
+static int ioctl_querymenu(void *arg,struct camera_data *cam)
+{
+ struct v4l2_querymenu *m = arg;
+
+ memset(m->name, 0, sizeof(m->name));
+ m->reserved = 0;
+
+ switch(m->id) {
+ case CPIA2_CID_FLICKER_MODE:
+ if(m->index < 0 || m->index >= NUM_FLICKER_CONTROLS)
+ return -EINVAL;
+
+ strcpy(m->name, flicker_controls[m->index].name);
+ break;
+ case CPIA2_CID_FRAMERATE:
+ {
+ int maximum = NUM_FRAMERATE_CONTROLS - 1;
+ if(cam->params.pnp_id.device_type == DEVICE_STV_672 &&
+ cam->params.version.sensor_flags==CPIA2_VP_SENSOR_FLAGS_500){
+ // Maximum 15fps
+ int i;
+ for(i=0; i<maximum; ++i) {
+ if(framerate_controls[i].value ==
+ CPIA2_VP_FRAMERATE_15)
+ maximum = i;
+ }
+ }
+ if(m->index < 0 || m->index > maximum)
+ return -EINVAL;
+
+ strcpy(m->name, framerate_controls[m->index].name);
+ break;
+ }
+ case CPIA2_CID_LIGHTS:
+ if(m->index < 0 || m->index >= NUM_LIGHTS_CONTROLS)
+ return -EINVAL;
+
+ strcpy(m->name, lights_controls[m->index].name);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * ioctl_g_ctrl
+ *
+ * V4L2 get the value of a control variable
+ *
+ *****************************************************************************/
+
+static int ioctl_g_ctrl(void *arg,struct camera_data *cam)
+{
+ struct v4l2_control *c = arg;
+
+ switch(c->id) {
+ case V4L2_CID_BRIGHTNESS:
+ cpia2_do_command(cam, CPIA2_CMD_GET_VP_BRIGHTNESS,
+ TRANSFER_READ, 0);
+ c->value = cam->params.color_params.brightness;
+ break;
+ case V4L2_CID_CONTRAST:
+ cpia2_do_command(cam, CPIA2_CMD_GET_CONTRAST,
+ TRANSFER_READ, 0);
+ c->value = cam->params.color_params.contrast;
+ break;
+ case V4L2_CID_SATURATION:
+ cpia2_do_command(cam, CPIA2_CMD_GET_VP_SATURATION,
+ TRANSFER_READ, 0);
+ c->value = cam->params.color_params.saturation;
+ break;
+ case V4L2_CID_HFLIP:
+ cpia2_do_command(cam, CPIA2_CMD_GET_USER_EFFECTS,
+ TRANSFER_READ, 0);
+ c->value = (cam->params.vp_params.user_effects &
+ CPIA2_VP_USER_EFFECTS_MIRROR) != 0;
+ break;
+ case V4L2_CID_VFLIP:
+ cpia2_do_command(cam, CPIA2_CMD_GET_USER_EFFECTS,
+ TRANSFER_READ, 0);
+ c->value = (cam->params.vp_params.user_effects &
+ CPIA2_VP_USER_EFFECTS_FLIP) != 0;
+ break;
+ case CPIA2_CID_TARGET_KB:
+ c->value = cam->params.vc_params.target_kb;
+ break;
+ case CPIA2_CID_GPIO:
+ cpia2_do_command(cam, CPIA2_CMD_GET_VP_GPIO_DATA,
+ TRANSFER_READ, 0);
+ c->value = cam->params.vp_params.gpio_data;
+ break;
+ case CPIA2_CID_FLICKER_MODE:
+ {
+ int i, mode;
+ cpia2_do_command(cam, CPIA2_CMD_GET_FLICKER_MODES,
+ TRANSFER_READ, 0);
+ if(cam->params.flicker_control.cam_register &
+ CPIA2_VP_FLICKER_MODES_NEVER_FLICKER) {
+ mode = NEVER_FLICKER;
+ } else {
+ if(cam->params.flicker_control.cam_register &
+ CPIA2_VP_FLICKER_MODES_50HZ) {
+ mode = FLICKER_50;
+ } else {
+ mode = FLICKER_60;
+ }
+ }
+ for(i=0; i<NUM_FLICKER_CONTROLS; i++) {
+ if(flicker_controls[i].value == mode) {
+ c->value = i;
+ break;
+ }
+ }
+ if(i == NUM_FLICKER_CONTROLS)
+ return -EINVAL;
+ break;
+ }
+ case CPIA2_CID_FRAMERATE:
+ {
+ int maximum = NUM_FRAMERATE_CONTROLS - 1;
+ int i;
+ for(i=0; i<= maximum; i++) {
+ if(cam->params.vp_params.frame_rate ==
+ framerate_controls[i].value)
+ break;
+ }
+ if(i > maximum)
+ return -EINVAL;
+ c->value = i;
+ break;
+ }
+ case CPIA2_CID_USB_ALT:
+ c->value = cam->params.camera_state.stream_mode;
+ break;
+ case CPIA2_CID_LIGHTS:
+ {
+ int i;
+ cpia2_do_command(cam, CPIA2_CMD_GET_VP_GPIO_DATA,
+ TRANSFER_READ, 0);
+ for(i=0; i<NUM_LIGHTS_CONTROLS; i++) {
+ if((cam->params.vp_params.gpio_data&GPIO_LIGHTS_MASK) ==
+ lights_controls[i].value) {
+ break;
+ }
+ }
+ if(i == NUM_LIGHTS_CONTROLS)
+ return -EINVAL;
+ c->value = i;
+ break;
+ }
+ case CPIA2_CID_RESET_CAMERA:
+ return -EINVAL;
+ default:
+ return -EINVAL;
+ }
+
+ DBG("Get control id:%d, value:%d\n", c->id, c->value);
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * ioctl_s_ctrl
+ *
+ * V4L2 set the value of a control variable
+ *
+ *****************************************************************************/
+
+static int ioctl_s_ctrl(void *arg,struct camera_data *cam)
+{
+ struct v4l2_control *c = arg;
+ int i;
+ int retval = 0;
+
+ DBG("Set control id:%d, value:%d\n", c->id, c->value);
+
+ /* Check that the value is in range */
+ for(i=0; i<NUM_CONTROLS; i++) {
+ if(c->id == controls[i].id) {
+ if(c->value < controls[i].minimum ||
+ c->value > controls[i].maximum) {
+ return -EINVAL;
+ }
+ break;
+ }
+ }
+ if(i == NUM_CONTROLS)
+ return -EINVAL;
+
+ switch(c->id) {
+ case V4L2_CID_BRIGHTNESS:
+ cpia2_set_brightness(cam, c->value);
+ break;
+ case V4L2_CID_CONTRAST:
+ cpia2_set_contrast(cam, c->value);
+ break;
+ case V4L2_CID_SATURATION:
+ cpia2_set_saturation(cam, c->value);
+ break;
+ case V4L2_CID_HFLIP:
+ cpia2_set_property_mirror(cam, c->value);
+ break;
+ case V4L2_CID_VFLIP:
+ cpia2_set_property_flip(cam, c->value);
+ break;
+ case CPIA2_CID_TARGET_KB:
+ retval = cpia2_set_target_kb(cam, c->value);
+ break;
+ case CPIA2_CID_GPIO:
+ retval = cpia2_set_gpio(cam, c->value);
+ break;
+ case CPIA2_CID_FLICKER_MODE:
+ retval = cpia2_set_flicker_mode(cam,
+ flicker_controls[c->value].value);
+ break;
+ case CPIA2_CID_FRAMERATE:
+ retval = cpia2_set_fps(cam, framerate_controls[c->value].value);
+ break;
+ case CPIA2_CID_USB_ALT:
+ retval = cpia2_usb_change_streaming_alternate(cam, c->value);
+ break;
+ case CPIA2_CID_LIGHTS:
+ retval = cpia2_set_gpio(cam, lights_controls[c->value].value);
+ break;
+ case CPIA2_CID_RESET_CAMERA:
+ cpia2_usb_stream_pause(cam);
+ cpia2_reset_camera(cam);
+ cpia2_usb_stream_resume(cam);
+ break;
+ default:
+ retval = -EINVAL;
+ }
+
+ return retval;
+}
+
+/******************************************************************************
+ *
+ * ioctl_g_jpegcomp
+ *
+ * V4L2 get the JPEG compression parameters
+ *
+ *****************************************************************************/
+
+static int ioctl_g_jpegcomp(void *arg,struct camera_data *cam)
+{
+ struct v4l2_jpegcompression *parms = arg;
+
+ memset(parms, 0, sizeof(*parms));
+
+ parms->quality = 80; // TODO: Can this be made meaningful?
+
+ parms->jpeg_markers = V4L2_JPEG_MARKER_DQT | V4L2_JPEG_MARKER_DRI;
+ if(!cam->params.compression.inhibit_htables) {
+ parms->jpeg_markers |= V4L2_JPEG_MARKER_DHT;
+ }
+
+ parms->APPn = cam->APPn;
+ parms->APP_len = cam->APP_len;
+ if(cam->APP_len > 0) {
+ memcpy(parms->APP_data, cam->APP_data, cam->APP_len);
+ parms->jpeg_markers |= V4L2_JPEG_MARKER_APP;
+ }
+
+ parms->COM_len = cam->COM_len;
+ if(cam->COM_len > 0) {
+ memcpy(parms->COM_data, cam->COM_data, cam->COM_len);
+ parms->jpeg_markers |= JPEG_MARKER_COM;
+ }
+
+ DBG("G_JPEGCOMP APP_len:%d COM_len:%d\n",
+ parms->APP_len, parms->COM_len);
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * ioctl_s_jpegcomp
+ *
+ * V4L2 set the JPEG compression parameters
+ * NOTE: quality and some jpeg_markers are ignored.
+ *
+ *****************************************************************************/
+
+static int ioctl_s_jpegcomp(void *arg,struct camera_data *cam)
+{
+ struct v4l2_jpegcompression *parms = arg;
+
+ DBG("S_JPEGCOMP APP_len:%d COM_len:%d\n",
+ parms->APP_len, parms->COM_len);
+
+ cam->params.compression.inhibit_htables =
+ !(parms->jpeg_markers & V4L2_JPEG_MARKER_DHT);
+
+ if(parms->APP_len != 0) {
+ if(parms->APP_len > 0 &&
+ parms->APP_len <= sizeof(cam->APP_data) &&
+ parms->APPn >= 0 && parms->APPn <= 15) {
+ cam->APPn = parms->APPn;
+ cam->APP_len = parms->APP_len;
+ memcpy(cam->APP_data, parms->APP_data, parms->APP_len);
+ } else {
+ LOG("Bad APPn Params n=%d len=%d\n",
+ parms->APPn, parms->APP_len);
+ return -EINVAL;
+ }
+ } else {
+ cam->APP_len = 0;
+ }
+
+ if(parms->COM_len != 0) {
+ if(parms->COM_len > 0 &&
+ parms->COM_len <= sizeof(cam->COM_data)) {
+ cam->COM_len = parms->COM_len;
+ memcpy(cam->COM_data, parms->COM_data, parms->COM_len);
+ } else {
+ LOG("Bad COM_len=%d\n", parms->COM_len);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * ioctl_reqbufs
+ *
+ * V4L2 Initiate memory mapping.
+ * NOTE: The user's request is ignored. For now the buffers are fixed.
+ *
+ *****************************************************************************/
+
+static int ioctl_reqbufs(void *arg,struct camera_data *cam)
+{
+ struct v4l2_requestbuffers *req = arg;
+
+ if(req->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ req->memory != V4L2_MEMORY_MMAP)
+ return -EINVAL;
+
+ DBG("REQBUFS requested:%d returning:%d\n", req->count, cam->num_frames);
+ req->count = cam->num_frames;
+ memset(&req->reserved, 0, sizeof(req->reserved));
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * ioctl_querybuf
+ *
+ * V4L2 Query memory buffer status.
+ *
+ *****************************************************************************/
+
+static int ioctl_querybuf(void *arg,struct camera_data *cam)
+{
+ struct v4l2_buffer *buf = arg;
+
+ if(buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ buf->index > cam->num_frames)
+ return -EINVAL;
+
+ buf->m.offset = cam->buffers[buf->index].data - cam->frame_buffer;
+ buf->length = cam->frame_size;
+
+ buf->memory = V4L2_MEMORY_MMAP;
+
+ if(cam->mmapped)
+ buf->flags = V4L2_BUF_FLAG_MAPPED;
+ else
+ buf->flags = 0;
+
+ switch (cam->buffers[buf->index].status) {
+ case FRAME_EMPTY:
+ case FRAME_ERROR:
+ case FRAME_READING:
+ buf->bytesused = 0;
+ buf->flags = V4L2_BUF_FLAG_QUEUED;
+ break;
+ case FRAME_READY:
+ buf->bytesused = cam->buffers[buf->index].length;
+ buf->timestamp = cam->buffers[buf->index].timestamp;
+ buf->sequence = cam->buffers[buf->index].seq;
+ buf->flags = V4L2_BUF_FLAG_DONE;
+ break;
+ }
+
+ DBG("QUERYBUF index:%d offset:%d flags:%d seq:%d bytesused:%d\n",
+ buf->index, buf->m.offset, buf->flags, buf->sequence,
+ buf->bytesused);
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * ioctl_qbuf
+ *
+ * V4L2 User is freeing buffer
+ *
+ *****************************************************************************/
+
+static int ioctl_qbuf(void *arg,struct camera_data *cam)
+{
+ struct v4l2_buffer *buf = arg;
+
+ if(buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ buf->memory != V4L2_MEMORY_MMAP ||
+ buf->index > cam->num_frames)
+ return -EINVAL;
+
+ DBG("QBUF #%d\n", buf->index);
+
+ if(cam->buffers[buf->index].status == FRAME_READY)
+ cam->buffers[buf->index].status = FRAME_EMPTY;
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * find_earliest_filled_buffer
+ *
+ * Helper for ioctl_dqbuf. Find the next ready buffer.
+ *
+ *****************************************************************************/
+
+static int find_earliest_filled_buffer(struct camera_data *cam)
+{
+ int i;
+ int found = -1;
+ for (i=0; i<cam->num_frames; i++) {
+ if(cam->buffers[i].status == FRAME_READY) {
+ if(found < 0) {
+ found = i;
+ } else {
+ /* find which buffer is earlier */
+ struct timeval *tv1, *tv2;
+ tv1 = &cam->buffers[i].timestamp;
+ tv2 = &cam->buffers[found].timestamp;
+ if(tv1->tv_sec < tv2->tv_sec ||
+ (tv1->tv_sec == tv2->tv_sec &&
+ tv1->tv_usec < tv2->tv_usec))
+ found = i;
+ }
+ }
+ }
+ return found;
+}
+
+/******************************************************************************
+ *
+ * ioctl_dqbuf
+ *
+ * V4L2 User is asking for a filled buffer.
+ *
+ *****************************************************************************/
+
+static int ioctl_dqbuf(void *arg,struct camera_data *cam, struct file *file)
+{
+ struct v4l2_buffer *buf = arg;
+ int frame;
+
+ if(buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+ buf->memory != V4L2_MEMORY_MMAP)
+ return -EINVAL;
+
+ frame = find_earliest_filled_buffer(cam);
+
+ if(frame < 0 && file->f_flags&O_NONBLOCK)
+ return -EAGAIN;
+
+ if(frame < 0) {
+ /* Wait for a frame to become available */
+ struct framebuf *cb=cam->curbuff;
+ up(&cam->busy_lock);
+ wait_event_interruptible(cam->wq_stream,
+ !cam->present ||
+ (cb=cam->curbuff)->status == FRAME_READY);
+ down(&cam->busy_lock);
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+ if(!cam->present)
+ return -ENOTTY;
+ frame = cb->num;
+ }
+
+
+ buf->index = frame;
+ buf->bytesused = cam->buffers[buf->index].length;
+ buf->flags = V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_DONE;
+ buf->field = V4L2_FIELD_NONE;
+ buf->timestamp = cam->buffers[buf->index].timestamp;
+ buf->sequence = cam->buffers[buf->index].seq;
+ buf->m.offset = cam->buffers[buf->index].data - cam->frame_buffer;
+ buf->length = cam->frame_size;
+ buf->input = 0;
+ buf->reserved = 0;
+ memset(&buf->timecode, 0, sizeof(buf->timecode));
+
+ DBG("DQBUF #%d status:%d seq:%d length:%d\n", buf->index,
+ cam->buffers[buf->index].status, buf->sequence, buf->bytesused);
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * cpia2_ioctl
+ *
+ *****************************************************************************/
+static int cpia2_do_ioctl(struct inode *inode, struct file *file,
+ unsigned int ioctl_nr, void *arg)
+{
+ struct video_device *dev = video_devdata(file);
+ struct camera_data *cam = video_get_drvdata(dev);
+ int retval = 0;
+
+ if (!cam)
+ return -ENOTTY;
+
+ /* make this _really_ smp-safe */
+ if (down_interruptible(&cam->busy_lock))
+ return -ERESTARTSYS;
+
+ if (!cam->present) {
+ up(&cam->busy_lock);
+ return -ENODEV;
+ }
+
+ /* Priority check */
+ switch (ioctl_nr) {
+ case VIDIOCSWIN:
+ case VIDIOCMCAPTURE:
+ case VIDIOC_S_FMT:
+ {
+ struct cpia2_fh *fh = file->private_data;
+ retval = v4l2_prio_check(&cam->prio, &fh->prio);
+ if(retval) {
+ up(&cam->busy_lock);
+ return retval;
+ }
+ break;
+ }
+ case VIDIOCGMBUF:
+ case VIDIOCSYNC:
+ {
+ struct cpia2_fh *fh = file->private_data;
+ if(fh->prio != V4L2_PRIORITY_RECORD) {
+ up(&cam->busy_lock);
+ return -EBUSY;
+ }
+ break;
+ }
+ default:
+ break;
+ }
+
+ switch (ioctl_nr) {
+ case VIDIOCGCAP: /* query capabilites */
+ retval = ioctl_cap_query(arg, cam);
+ break;
+
+ case VIDIOCGCHAN: /* get video source - we are a camera, nothing else */
+ retval = ioctl_get_channel(arg);
+ break;
+ case VIDIOCSCHAN: /* set video source - we are a camera, nothing else */
+ retval = ioctl_set_channel(arg);
+ break;
+ case VIDIOCGPICT: /* image properties */
+ memcpy(arg, &cam->vp, sizeof(struct video_picture));
+ break;
+ case VIDIOCSPICT:
+ retval = ioctl_set_image_prop(arg, cam);
+ break;
+ case VIDIOCGWIN: /* get/set capture window */
+ memcpy(arg, &cam->vw, sizeof(struct video_window));
+ break;
+ case VIDIOCSWIN:
+ retval = ioctl_set_window_size(arg, cam, file->private_data);
+ break;
+ case VIDIOCGMBUF: /* mmap interface */
+ retval = ioctl_get_mbuf(arg, cam);
+ break;
+ case VIDIOCMCAPTURE:
+ retval = ioctl_mcapture(arg, cam, file->private_data);
+ break;
+ case VIDIOCSYNC:
+ retval = ioctl_sync(arg, cam);
+ break;
+ /* pointless to implement overlay with this camera */
+ case VIDIOCCAPTURE:
+ case VIDIOCGFBUF:
+ case VIDIOCSFBUF:
+ case VIDIOCKEY:
+ retval = -EINVAL;
+ break;
+
+ /* tuner interface - we have none */
+ case VIDIOCGTUNER:
+ case VIDIOCSTUNER:
+ case VIDIOCGFREQ:
+ case VIDIOCSFREQ:
+ retval = -EINVAL;
+ break;
+
+ /* audio interface - we have none */
+ case VIDIOCGAUDIO:
+ case VIDIOCSAUDIO:
+ retval = -EINVAL;
+ break;
+
+ /* CPIA2 extension to Video4Linux API */
+ case CPIA2_IOC_SET_GPIO:
+ retval = ioctl_set_gpio(arg, cam);
+ break;
+ case VIDIOC_QUERYCAP:
+ retval = ioctl_querycap(arg,cam);
+ break;
+
+ case VIDIOC_ENUMINPUT:
+ case VIDIOC_G_INPUT:
+ case VIDIOC_S_INPUT:
+ retval = ioctl_input(ioctl_nr, arg,cam);
+ break;
+
+ case VIDIOC_ENUM_FMT:
+ retval = ioctl_enum_fmt(arg,cam);
+ break;
+ case VIDIOC_TRY_FMT:
+ retval = ioctl_try_fmt(arg,cam);
+ break;
+ case VIDIOC_G_FMT:
+ retval = ioctl_get_fmt(arg,cam);
+ break;
+ case VIDIOC_S_FMT:
+ retval = ioctl_set_fmt(arg,cam,file->private_data);
+ break;
+
+ case VIDIOC_CROPCAP:
+ retval = ioctl_cropcap(arg,cam);
+ break;
+ case VIDIOC_G_CROP:
+ case VIDIOC_S_CROP:
+ // TODO: I think cropping can be implemented - SJB
+ retval = -EINVAL;
+ break;
+
+ case VIDIOC_QUERYCTRL:
+ retval = ioctl_queryctrl(arg,cam);
+ break;
+ case VIDIOC_QUERYMENU:
+ retval = ioctl_querymenu(arg,cam);
+ break;
+ case VIDIOC_G_CTRL:
+ retval = ioctl_g_ctrl(arg,cam);
+ break;
+ case VIDIOC_S_CTRL:
+ retval = ioctl_s_ctrl(arg,cam);
+ break;
+
+ case VIDIOC_G_JPEGCOMP:
+ retval = ioctl_g_jpegcomp(arg,cam);
+ break;
+ case VIDIOC_S_JPEGCOMP:
+ retval = ioctl_s_jpegcomp(arg,cam);
+ break;
+
+ case VIDIOC_G_PRIORITY:
+ {
+ struct cpia2_fh *fh = file->private_data;
+ *(enum v4l2_priority*)arg = fh->prio;
+ break;
+ }
+ case VIDIOC_S_PRIORITY:
+ {
+ struct cpia2_fh *fh = file->private_data;
+ enum v4l2_priority prio;
+ prio = *(enum v4l2_priority*)arg;
+ if(cam->streaming &&
+ prio != fh->prio &&
+ fh->prio == V4L2_PRIORITY_RECORD) {
+ /* Can't drop record priority while streaming */
+ retval = -EBUSY;
+ } else if(prio == V4L2_PRIORITY_RECORD &&
+ prio != fh->prio &&
+ v4l2_prio_max(&cam->prio) == V4L2_PRIORITY_RECORD) {
+ /* Only one program can record at a time */
+ retval = -EBUSY;
+ } else {
+ retval = v4l2_prio_change(&cam->prio, &fh->prio, prio);
+ }
+ break;
+ }
+
+ case VIDIOC_REQBUFS:
+ retval = ioctl_reqbufs(arg,cam);
+ break;
+ case VIDIOC_QUERYBUF:
+ retval = ioctl_querybuf(arg,cam);
+ break;
+ case VIDIOC_QBUF:
+ retval = ioctl_qbuf(arg,cam);
+ break;
+ case VIDIOC_DQBUF:
+ retval = ioctl_dqbuf(arg,cam,file);
+ break;
+ case VIDIOC_STREAMON:
+ {
+ int type;
+ DBG("VIDIOC_STREAMON, streaming=%d\n", cam->streaming);
+ type = *(int*)arg;
+ if(!cam->mmapped || type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ retval = -EINVAL;
+
+ if(!cam->streaming) {
+ retval = cpia2_usb_stream_start(cam,
+ cam->params.camera_state.stream_mode);
+ } else {
+ retval = -EINVAL;
+ }
+
+ break;
+ }
+ case VIDIOC_STREAMOFF:
+ {
+ int type;
+ DBG("VIDIOC_STREAMOFF, streaming=%d\n", cam->streaming);
+ type = *(int*)arg;
+ if(!cam->mmapped || type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ retval = -EINVAL;
+
+ if(cam->streaming) {
+ retval = cpia2_usb_stream_stop(cam);
+ } else {
+ retval = -EINVAL;
+ }
+
+ break;
+ }
+
+ case VIDIOC_ENUMOUTPUT:
+ case VIDIOC_G_OUTPUT:
+ case VIDIOC_S_OUTPUT:
+ case VIDIOC_G_MODULATOR:
+ case VIDIOC_S_MODULATOR:
+
+ case VIDIOC_ENUMAUDIO:
+ case VIDIOC_G_AUDIO:
+ case VIDIOC_S_AUDIO:
+
+ case VIDIOC_ENUMAUDOUT:
+ case VIDIOC_G_AUDOUT:
+ case VIDIOC_S_AUDOUT:
+
+ case VIDIOC_ENUMSTD:
+ case VIDIOC_QUERYSTD:
+ case VIDIOC_G_STD:
+ case VIDIOC_S_STD:
+
+ case VIDIOC_G_TUNER:
+ case VIDIOC_S_TUNER:
+ case VIDIOC_G_FREQUENCY:
+ case VIDIOC_S_FREQUENCY:
+
+ case VIDIOC_OVERLAY:
+ case VIDIOC_G_FBUF:
+ case VIDIOC_S_FBUF:
+
+ case VIDIOC_G_PARM:
+ case VIDIOC_S_PARM:
+ retval = -EINVAL;
+ break;
+ default:
+ retval = -ENOIOCTLCMD;
+ break;
+ }
+
+ up(&cam->busy_lock);
+ return retval;
+}
+
+static int cpia2_ioctl(struct inode *inode, struct file *file,
+ unsigned int ioctl_nr, unsigned long iarg)
+{
+ return video_usercopy(inode, file, ioctl_nr, iarg, cpia2_do_ioctl);
+}
+
+/******************************************************************************
+ *
+ * cpia2_mmap
+ *
+ *****************************************************************************/
+static int cpia2_mmap(struct file *file, struct vm_area_struct *area)
+{
+ int retval;
+ struct video_device *dev = video_devdata(file);
+ struct camera_data *cam = video_get_drvdata(dev);
+
+ /* Priority check */
+ struct cpia2_fh *fh = file->private_data;
+ if(fh->prio != V4L2_PRIORITY_RECORD) {
+ return -EBUSY;
+ }
+
+ retval = cpia2_remap_buffer(cam, area);
+
+ if(!retval)
+ fh->mmapped = 1;
+ return retval;
+}
+
+/******************************************************************************
+ *
+ * reset_camera_struct_v4l
+ *
+ * Sets all values to the defaults
+ *****************************************************************************/
+static void reset_camera_struct_v4l(struct camera_data *cam)
+{
+ /***
+ * Fill in the v4l structures. video_cap is filled in inside the VIDIOCCAP
+ * Ioctl. Here, just do the window and picture stucts.
+ ***/
+ cam->vp.palette = (u16) VIDEO_PALETTE_RGB24; /* Is this right? */
+ cam->vp.brightness = (u16) cam->params.color_params.brightness * 256;
+ cam->vp.colour = (u16) cam->params.color_params.saturation * 256;
+ cam->vp.contrast = (u16) cam->params.color_params.contrast * 256;
+
+ cam->vw.x = 0;
+ cam->vw.y = 0;
+ cam->vw.width = cam->params.roi.width;
+ cam->vw.height = cam->params.roi.height;
+ cam->vw.flags = 0;
+ cam->vw.clipcount = 0;
+
+ cam->frame_size = buffer_size;
+ cam->num_frames = num_buffers;
+
+ /* FlickerModes */
+ cam->params.flicker_control.flicker_mode_req = flicker_mode;
+ cam->params.flicker_control.mains_frequency = flicker_freq;
+
+ /* streamMode */
+ cam->params.camera_state.stream_mode = alternate;
+
+ cam->pixelformat = V4L2_PIX_FMT_JPEG;
+ v4l2_prio_init(&cam->prio);
+ return;
+}
+
+/***
+ * The v4l video device structure initialized for this device
+ ***/
+static struct file_operations fops_template = {
+ .owner= THIS_MODULE,
+ .open= cpia2_open,
+ .release= cpia2_close,
+ .read= cpia2_v4l_read,
+ .poll= cpia2_v4l_poll,
+ .ioctl= cpia2_ioctl,
+ .llseek= no_llseek,
+ .mmap= cpia2_mmap,
+};
+
+static struct video_device cpia2_template = {
+ /* I could not find any place for the old .initialize initializer?? */
+ .owner= THIS_MODULE,
+ .name= "CPiA2 Camera",
+ .type= VID_TYPE_CAPTURE,
+ .type2 = V4L2_CAP_VIDEO_CAPTURE |
+ V4L2_CAP_STREAMING,
+ .hardware= VID_HARDWARE_CPIA2,
+ .minor= -1,
+ .fops= &fops_template,
+ .release= video_device_release,
+};
+
+/******************************************************************************
+ *
+ * cpia2_register_camera
+ *
+ *****************************************************************************/
+int cpia2_register_camera(struct camera_data *cam)
+{
+ cam->vdev = video_device_alloc();
+ if(!cam->vdev)
+ return -ENOMEM;
+
+ memcpy(cam->vdev, &cpia2_template, sizeof(cpia2_template));
+ video_set_drvdata(cam->vdev, cam);
+
+ reset_camera_struct_v4l(cam);
+
+ /* register v4l device */
+ if (video_register_device
+ (cam->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+ ERR("video_register_device failed\n");
+ video_device_release(cam->vdev);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * cpia2_unregister_camera
+ *
+ *****************************************************************************/
+void cpia2_unregister_camera(struct camera_data *cam)
+{
+ if (!cam->open_count) {
+ video_unregister_device(cam->vdev);
+ } else {
+ LOG("/dev/video%d removed while open, "
+ "deferring video_unregister_device\n",
+ cam->vdev->minor);
+ }
+}
+
+/******************************************************************************
+ *
+ * check_parameters
+ *
+ * Make sure that all user-supplied parameters are sensible
+ *****************************************************************************/
+static void __init check_parameters(void)
+{
+ if(buffer_size < PAGE_SIZE) {
+ buffer_size = PAGE_SIZE;
+ LOG("buffer_size too small, setting to %d\n", buffer_size);
+ } else if(buffer_size > 1024*1024) {
+ /* arbitrary upper limiit */
+ buffer_size = 1024*1024;
+ LOG("buffer_size ridiculously large, setting to %d\n",
+ buffer_size);
+ } else {
+ buffer_size += PAGE_SIZE-1;
+ buffer_size &= ~(PAGE_SIZE-1);
+ }
+
+ if(num_buffers < 1) {
+ num_buffers = 1;
+ LOG("num_buffers too small, setting to %d\n", num_buffers);
+ } else if(num_buffers > VIDEO_MAX_FRAME) {
+ num_buffers = VIDEO_MAX_FRAME;
+ LOG("num_buffers too large, setting to %d\n", num_buffers);
+ }
+
+ if(alternate < USBIF_ISO_1 || alternate > USBIF_ISO_6) {
+ alternate = DEFAULT_ALT;
+ LOG("alternate specified is invalid, using %d\n", alternate);
+ }
+
+ if (flicker_mode != NEVER_FLICKER && flicker_mode != ANTI_FLICKER_ON) {
+ flicker_mode = NEVER_FLICKER;
+ LOG("Flicker mode specified is invalid, using %d\n",
+ flicker_mode);
+ }
+
+ if (flicker_freq != FLICKER_50 && flicker_freq != FLICKER_60) {
+ flicker_freq = FLICKER_60;
+ LOG("Flicker mode specified is invalid, using %d\n",
+ flicker_freq);
+ }
+
+ if(video_nr < -1 || video_nr > 64) {
+ video_nr = -1;
+ LOG("invalid video_nr specified, must be -1 to 64\n");
+ }
+
+ DBG("Using %d buffers, each %d bytes, alternate=%d\n",
+ num_buffers, buffer_size, alternate);
+}
+
+/************ Module Stuff ***************/
+
+
+/******************************************************************************
+ *
+ * cpia2_init/module_init
+ *
+ *****************************************************************************/
+int __init cpia2_init(void)
+{
+ LOG("%s v%d.%d.%d\n",
+ ABOUT, CPIA2_MAJ_VER, CPIA2_MIN_VER, CPIA2_PATCH_VER);
+ check_parameters();
+ cpia2_usb_init();
+ return 0;
+}
+
+
+/******************************************************************************
+ *
+ * cpia2_exit/module_exit
+ *
+ *****************************************************************************/
+void __exit cpia2_exit(void)
+{
+ cpia2_usb_cleanup();
+ schedule_timeout(2 * HZ);
+}
+
+
+int __init cpia2_setup(char *str)
+{
+ while(str) {
+ if(!strncmp(str, "buffer_size:", 12)) {
+ buffer_size = simple_strtoul(str + 13, &str, 10);
+ } else if(!strncmp(str, "num_buffers:", 12)) {
+ num_buffers = simple_strtoul(str + 13, &str, 10);
+ } else if(!strncmp(str, "alternate:", 10)) {
+ alternate = simple_strtoul(str + 11, &str, 10);
+ } else if(!strncmp(str, "video_nr:", 9)) {
+ video_nr = simple_strtoul(str + 10, &str, 10);
+ } else if(!strncmp(str, "flicker_freq:",13)) {
+ flicker_freq = simple_strtoul(str + 14, &str, 10);
+ } else if(!strncmp(str, "flicker_mode:",13)) {
+ flicker_mode = simple_strtoul(str + 14, &str, 10);
+ } else {
+ ++str;
+ }
+ }
+ return 1;
+}
+
+__setup("cpia2=", cpia2_setup);
+
+module_init(cpia2_init);
+module_exit(cpia2_exit);
+
diff --git a/drivers/media/video/cpia2/cpia2dev.h b/drivers/media/video/cpia2/cpia2dev.h
new file mode 100644
index 00000000000..d58097ce0d5
--- /dev/null
+++ b/drivers/media/video/cpia2/cpia2dev.h
@@ -0,0 +1,50 @@
+/****************************************************************************
+ *
+ * Filename: cpia2dev.h
+ *
+ * Copyright 2001, STMicrolectronics, Inc.
+ *
+ * Contact: steve.miller@st.com
+ *
+ * Description:
+ * This file provides definitions for applications wanting to use the
+ * cpia2 driver beyond the generic v4l capabilities.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ ****************************************************************************/
+
+#ifndef CPIA2_DEV_HEADER
+#define CPIA2_DEV_HEADER
+
+#include <linux/videodev.h>
+
+/***
+ * The following defines are ioctl numbers based on video4linux private ioctls,
+ * which can range from 192 (BASE_VIDIOCPRIVATE) to 255. All of these take int
+ * args
+ */
+#define CPIA2_IOC_SET_GPIO _IOW('v', BASE_VIDIOCPRIVATE + 17, __u32)
+
+/* V4L2 driver specific controls */
+#define CPIA2_CID_TARGET_KB (V4L2_CID_PRIVATE_BASE+0)
+#define CPIA2_CID_GPIO (V4L2_CID_PRIVATE_BASE+1)
+#define CPIA2_CID_FLICKER_MODE (V4L2_CID_PRIVATE_BASE+2)
+#define CPIA2_CID_FRAMERATE (V4L2_CID_PRIVATE_BASE+3)
+#define CPIA2_CID_USB_ALT (V4L2_CID_PRIVATE_BASE+4)
+#define CPIA2_CID_LIGHTS (V4L2_CID_PRIVATE_BASE+5)
+#define CPIA2_CID_RESET_CAMERA (V4L2_CID_PRIVATE_BASE+6)
+
+#endif
diff --git a/drivers/media/video/cpia2/cpia2patch.h b/drivers/media/video/cpia2/cpia2patch.h
new file mode 100644
index 00000000000..7f085fbe76f
--- /dev/null
+++ b/drivers/media/video/cpia2/cpia2patch.h
@@ -0,0 +1,233 @@
+/****************************************************************************
+ *
+ * Filename: cpia2patch.h
+ *
+ * Copyright 2001, STMicrolectronics, Inc.
+ *
+ * Contact: steve.miller@st.com
+ *
+ * Description:
+ * This file contains patch data for the CPiA2 (stv0672) VP4.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ ****************************************************************************/
+
+#ifndef CPIA2_PATCH_HEADER
+#define CPIA2_PATCH_HEADER
+
+typedef struct {
+ unsigned char reg;
+ unsigned char count;
+ const unsigned char *data;
+} cpia2_patch;
+
+static const unsigned char start_address_hi[1] = {
+ 0x01
+};
+
+static const unsigned char start_address_lo[1] = {
+ 0xBC
+};
+
+static const unsigned char patch_block0[64] = {
+ 0xE3, 0x02, 0xE3, 0x03, 0xE3, 0x04, 0xE3, 0x05,
+ 0xE3, 0x06, 0xE3, 0x07, 0x93, 0x44, 0x56, 0xD4,
+ 0x93, 0x4E, 0x56, 0x51, 0x93, 0x4E, 0x51, 0xD6,
+ 0x93, 0x4E, 0x4F, 0x54, 0x93, 0x4E, 0x92, 0x4F,
+ 0x92, 0xA4, 0x93, 0x05, 0x92, 0xF4, 0x93, 0x1B,
+ 0x92, 0x92, 0x91, 0xE6, 0x92, 0x36, 0x92, 0x74,
+ 0x92, 0x4A, 0x92, 0x8C, 0x92, 0x8E, 0xC8, 0xD0,
+ 0x0B, 0x42, 0x02, 0xA0, 0xCA, 0x92, 0x09, 0x02
+};
+
+static const unsigned char patch_block1[64] = {
+ 0xC9, 0x10, 0x0A, 0x0A, 0x0A, 0x81, 0xE3, 0xB8,
+ 0xE3, 0xB0, 0xE3, 0xA8, 0xE3, 0xA0, 0xE3, 0x98,
+ 0xE3, 0x90, 0xE1, 0x00, 0xCF, 0xD7, 0x0A, 0x12,
+ 0xCC, 0x95, 0x08, 0xB2, 0x0A, 0x18, 0xE1, 0x00,
+ 0x01, 0xEE, 0x0C, 0x08, 0x4A, 0x12, 0xC8, 0x18,
+ 0xF0, 0x9A, 0xC0, 0x22, 0xF3, 0x1C, 0x4A, 0x13,
+ 0xF3, 0x14, 0xC8, 0xA0, 0xF2, 0x14, 0xF2, 0x1C,
+ 0xEB, 0x13, 0xD3, 0xA2, 0x63, 0x16, 0x48, 0x9E
+};
+
+static const unsigned char patch_block2[64] = {
+ 0xF0, 0x18, 0xA4, 0x03, 0xF3, 0x93, 0xC0, 0x58,
+ 0xF7, 0x13, 0x51, 0x9C, 0xE9, 0x20, 0xCF, 0xEF,
+ 0x63, 0xF9, 0x92, 0x2E, 0xD3, 0x5F, 0x63, 0xFA,
+ 0x92, 0x2E, 0xD3, 0x67, 0x63, 0xFB, 0x92, 0x2E,
+ 0xD3, 0x6F, 0xE9, 0x1A, 0x63, 0x16, 0x48, 0xA7,
+ 0xF0, 0x20, 0xA4, 0x06, 0xF3, 0x94, 0xC0, 0x27,
+ 0xF7, 0x14, 0xF5, 0x13, 0x51, 0x9D, 0xF6, 0x13,
+ 0x63, 0x18, 0xC4, 0x20, 0xCB, 0xEF, 0x63, 0xFC
+};
+
+static const unsigned char patch_block3[64] = {
+ 0x92, 0x2E, 0xD3, 0x77, 0x63, 0xFD, 0x92, 0x2E,
+ 0xD3, 0x7F, 0x63, 0xFE, 0x92, 0x2E, 0xD3, 0x87,
+ 0x63, 0xFF, 0x92, 0x2E, 0xD3, 0x8F, 0x64, 0x38,
+ 0x92, 0x2E, 0xD3, 0x97, 0x64, 0x39, 0x92, 0x2E,
+ 0xD3, 0x9F, 0xE1, 0x00, 0xF5, 0x3A, 0xF4, 0x3B,
+ 0xF7, 0xBF, 0xF2, 0xBC, 0xF2, 0x3D, 0xE1, 0x00,
+ 0x80, 0x87, 0x90, 0x80, 0x51, 0xD5, 0x02, 0x22,
+ 0x02, 0x32, 0x4B, 0xD3, 0xF7, 0x11, 0x0B, 0xDA
+};
+
+static const unsigned char patch_block4[64] = {
+ 0xE1, 0x00, 0x0E, 0x02, 0x02, 0x40, 0x0D, 0xB5,
+ 0xE3, 0x02, 0x48, 0x55, 0xE5, 0x12, 0xA4, 0x01,
+ 0xE8, 0x1B, 0xE3, 0x90, 0xF0, 0x18, 0xA4, 0x01,
+ 0xE8, 0xBF, 0x8D, 0xB8, 0x4B, 0xD1, 0x4B, 0xD8,
+ 0x0B, 0xCB, 0x0B, 0xC2, 0xE1, 0x00, 0xE3, 0x02,
+ 0xE3, 0x03, 0x52, 0xD3, 0x60, 0x59, 0xE6, 0x93,
+ 0x0D, 0x22, 0x52, 0xD4, 0xE6, 0x93, 0x0D, 0x2A,
+ 0xE3, 0x98, 0xE3, 0x90, 0xE1, 0x00, 0x02, 0x5D
+};
+
+static const unsigned char patch_block5[64] = {
+ 0x02, 0x63, 0xE3, 0x02, 0xC8, 0x12, 0x02, 0xCA,
+ 0xC8, 0x52, 0x02, 0xC2, 0x82, 0x68, 0xE3, 0x02,
+ 0xC8, 0x14, 0x02, 0xCA, 0xC8, 0x90, 0x02, 0xC2,
+ 0x0A, 0xD0, 0xC9, 0x93, 0x0A, 0xDA, 0xCC, 0xD2,
+ 0x0A, 0xE2, 0x63, 0x12, 0x02, 0xDA, 0x0A, 0x98,
+ 0x0A, 0xA0, 0x0A, 0xA8, 0xE3, 0x90, 0xE1, 0x00,
+ 0xE3, 0x02, 0x0A, 0xD0, 0xC9, 0x93, 0x0A, 0xDA,
+ 0xCC, 0xD2, 0x0A, 0xE2, 0x63, 0x12, 0x02, 0xDA
+};
+
+static const unsigned char patch_block6[64] = {
+ 0x0A, 0x98, 0x0A, 0xA0, 0x0A, 0xA8, 0x49, 0x91,
+ 0xE5, 0x6A, 0xA4, 0x04, 0xC8, 0x12, 0x02, 0xCA,
+ 0xC8, 0x52, 0x82, 0x89, 0xC8, 0x14, 0x02, 0xCA,
+ 0xC8, 0x90, 0x02, 0xC2, 0xE3, 0x90, 0xE1, 0x00,
+ 0x08, 0x60, 0xE1, 0x00, 0x48, 0x53, 0xE8, 0x97,
+ 0x08, 0x5A, 0xE1, 0x00, 0xE3, 0x02, 0xE3, 0x03,
+ 0x54, 0xD3, 0x60, 0x59, 0xE6, 0x93, 0x0D, 0x52,
+ 0xE3, 0x98, 0xE3, 0x90, 0xE1, 0x00, 0x02, 0x9C
+};
+
+static const unsigned char patch_block7[64] = {
+ 0xE3, 0x02, 0x55, 0x13, 0x93, 0x17, 0x55, 0x13,
+ 0x93, 0x17, 0xE3, 0x90, 0xE1, 0x00, 0x75, 0x30,
+ 0xE3, 0x02, 0xE3, 0x03, 0x55, 0x55, 0x60, 0x59,
+ 0xE6, 0x93, 0x0D, 0xB2, 0xE3, 0x98, 0xE3, 0x90,
+ 0xE1, 0x00, 0x02, 0xAE, 0xE7, 0x92, 0xE9, 0x18,
+ 0xEA, 0x9A, 0xE8, 0x98, 0xE8, 0x10, 0xE8, 0x11,
+ 0xE8, 0x51, 0xD2, 0xDA, 0xD2, 0xF3, 0xE8, 0x13,
+ 0xD2, 0xFA, 0xE8, 0x50, 0xD2, 0xEA, 0xE8, 0xD0
+};
+
+static const unsigned char patch_block8[64] = {
+ 0xE8, 0xD1, 0xD3, 0x0A, 0x03, 0x09, 0x48, 0x23,
+ 0xE5, 0x2C, 0xA0, 0x03, 0x48, 0x24, 0xEA, 0x1C,
+ 0x03, 0x08, 0xD2, 0xE3, 0xD3, 0x03, 0xD3, 0x13,
+ 0xE1, 0x00, 0x02, 0xCB, 0x05, 0x93, 0x57, 0x93,
+ 0xF0, 0x9A, 0xAC, 0x0B, 0xE3, 0x07, 0x92, 0xEA,
+ 0xE2, 0x9F, 0xE5, 0x06, 0xE3, 0xB0, 0xA0, 0x02,
+ 0xEB, 0x1E, 0x82, 0xD7, 0xEA, 0x1E, 0xE2, 0x3B,
+ 0x85, 0x9B, 0xE9, 0x1E, 0xC8, 0x90, 0x85, 0x94
+};
+
+static const unsigned char patch_block9[64] = {
+ 0x02, 0xDE, 0x05, 0x80, 0x57, 0x93, 0xF0, 0xBA,
+ 0xAC, 0x06, 0x92, 0xEA, 0xE2, 0xBF, 0xE5, 0x06,
+ 0xA0, 0x01, 0xEB, 0xBF, 0x85, 0x88, 0xE9, 0x3E,
+ 0xC8, 0x90, 0x85, 0x81, 0xE9, 0x3E, 0xF0, 0xBA,
+ 0xF3, 0x39, 0xF0, 0x3A, 0x60, 0x17, 0xF0, 0x3A,
+ 0xC0, 0x90, 0xF0, 0xBA, 0xE1, 0x00, 0x00, 0x3F,
+ 0xE3, 0x02, 0xE3, 0x03, 0x58, 0x10, 0x60, 0x59,
+ 0xE6, 0x93, 0x0D, 0xA2, 0x58, 0x12, 0xE6, 0x93
+};
+
+static const unsigned char patch_block10[64] = {
+ 0x0D, 0xAA, 0xE3, 0x98, 0xE3, 0x90, 0xE1, 0x00,
+ 0x03, 0x01, 0xE1, 0x00, 0x03, 0x03, 0x9B, 0x7D,
+ 0x8B, 0x8B, 0xE3, 0x02, 0xE3, 0x03, 0x58, 0x56,
+ 0x60, 0x59, 0xE6, 0x93, 0x0D, 0xBA, 0xE3, 0x98,
+ 0xE3, 0x90, 0xE1, 0x00, 0x03, 0x0F, 0x93, 0x11,
+ 0xE1, 0x00, 0xE3, 0x02, 0x4A, 0x11, 0x0B, 0x42,
+ 0x91, 0xAF, 0xE3, 0x90, 0xE1, 0x00, 0xF2, 0x91,
+ 0xF0, 0x91, 0xA3, 0xFE, 0xE1, 0x00, 0x60, 0x92
+};
+
+static const unsigned char patch_block11[64] = {
+ 0xC0, 0x5F, 0xF0, 0x13, 0xF0, 0x13, 0x59, 0x5B,
+ 0xE2, 0x13, 0xF0, 0x11, 0x5A, 0x19, 0xE2, 0x13,
+ 0xE1, 0x00, 0x00, 0x00, 0x03, 0x27, 0x68, 0x61,
+ 0x76, 0x61, 0x6E, 0x61, 0x00, 0x06, 0x03, 0x2C,
+ 0xE3, 0x02, 0xE3, 0x03, 0xE9, 0x38, 0x59, 0x15,
+ 0x59, 0x5A, 0xF2, 0x9A, 0xBC, 0x0B, 0xA4, 0x0A,
+ 0x59, 0x1E, 0xF3, 0x11, 0xF0, 0x1A, 0xE2, 0xBB,
+ 0x59, 0x15, 0xF0, 0x11, 0x19, 0x2A, 0xE5, 0x02
+};
+
+static const unsigned char patch_block12[54] = {
+ 0xA4, 0x01, 0xEB, 0xBF, 0xE3, 0x98, 0xE3, 0x90,
+ 0xE1, 0x00, 0x03, 0x42, 0x19, 0x28, 0xE1, 0x00,
+ 0xE9, 0x30, 0x60, 0x79, 0xE1, 0x00, 0xE3, 0x03,
+ 0xE3, 0x07, 0x60, 0x79, 0x93, 0x4E, 0xE3, 0xB8,
+ 0xE3, 0x98, 0xE1, 0x00, 0xE9, 0x1A, 0xF0, 0x1F,
+ 0xE2, 0x33, 0xF0, 0x91, 0xE2, 0x92, 0xE0, 0x32,
+ 0xF0, 0x31, 0xE1, 0x00, 0x00, 0x00
+};
+
+static const unsigned char do_call[1] = {
+ 0x01
+};
+
+
+#define PATCH_DATA_SIZE 18
+
+static const cpia2_patch patch_data[PATCH_DATA_SIZE] = {
+ {0x0A, sizeof(start_address_hi), start_address_hi}
+ , // 0
+ {0x0B, sizeof(start_address_lo), start_address_lo}
+ , // 1
+ {0x0C, sizeof(patch_block0), patch_block0}
+ , // 2
+ {0x0C, sizeof(patch_block1), patch_block1}
+ , // 3
+ {0x0C, sizeof(patch_block2), patch_block2}
+ , // 4
+ {0x0C, sizeof(patch_block3), patch_block3}
+ , // 5
+ {0x0C, sizeof(patch_block4), patch_block4}
+ , // 6
+ {0x0C, sizeof(patch_block5), patch_block5}
+ , // 7
+ {0x0C, sizeof(patch_block6), patch_block6}
+ , // 8
+ {0x0C, sizeof(patch_block7), patch_block7}
+ , // 9
+ {0x0C, sizeof(patch_block8), patch_block8}
+ , // 10
+ {0x0C, sizeof(patch_block9), patch_block9}
+ , //11
+ {0x0C, sizeof(patch_block10), patch_block10}
+ , // 12
+ {0x0C, sizeof(patch_block11), patch_block11}
+ , // 13
+ {0x0C, sizeof(patch_block12), patch_block12}
+ , // 14
+ {0x0A, sizeof(start_address_hi), start_address_hi}
+ , // 15
+ {0x0B, sizeof(start_address_lo), start_address_lo}
+ , // 16
+ {0x0D, sizeof(do_call), do_call} //17
+};
+
+
+#endif