fix typos 'comamnd' -> 'command' in comments

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>

5 files changed, 6 insertions, 6 deletions

diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c
index 7d912baf01d..049650d42c8 100644
--- a/drivers/atm/firestream.c
+++ b/drivers/atm/firestream.c
@@ -1031,7 +1031,7 @@ static int fs_open(struct atm_vcc *atm_vcc)
 		/* We now use the "submit_command" function to submit commands to
 		   the firestream. There is a define up near the definition of
 		   that routine that switches this routine between immediate write
-		   to the immediate comamnd registers and queuing the commands in
+		   to the immediate command registers and queuing the commands in
 		   the HPTXQ for execution. This last technique might be more
 		   efficient if we know we're going to submit a whole lot of
 		   commands in one go, but this driver is not setup to be able to
diff --git a/drivers/block/smart1,2.h b/drivers/block/smart1,2.h
index a0b403a6b4e..e5565fbaeb3 100644
--- a/drivers/block/smart1,2.h
+++ b/drivers/block/smart1,2.h
@@ -95,7 +95,7 @@ static unsigned long smart4_completed(ctlr_info_t *h)
  /*
  *  This hardware returns interrupt pending at a different place and 
  *  it does not tell us if the fifo is empty, we will have check  
- *  that by getting a 0 back from the comamnd_completed call. 
+ *  that by getting a 0 back from the command_completed call. 
  */
 static unsigned long smart4_intr_pending(ctlr_info_t *h)
 {
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 61915f37141..da60faee74f 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -1397,7 +1397,7 @@ static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv)
 }
 
 /*
- * Send the CARD_DISABLE_PHY_OFF comamnd to the card to disable it
+ * Send the CARD_DISABLE_PHY_OFF command to the card to disable it
  *
  * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
  *
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 9aa048525eb..c212694a971 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -1412,7 +1412,7 @@ megaraid_isr_memmapped(int irq, void *devp)
  * @nstatus - number of completed commands
  * @status - status of the last command completed
  *
- * Complete the comamnds and call the scsi mid-layer callback hooks.
+ * Complete the commands and call the scsi mid-layer callback hooks.
  */
 static void
 mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)
@@ -4296,7 +4296,7 @@ mega_support_cluster(adapter_t *adapter)
  * @adapter - pointer to our soft state
  * @dma_handle - DMA address of the buffer
  *
- * Issue internal comamnds while interrupts are available.
+ * Issue internal commands while interrupts are available.
  * We only issue direct mailbox commands from within the driver. ioctl()
  * interface using these routines can issue passthru commands.
  */
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 5d6d07bd1cd..a18ba43af73 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -877,7 +877,7 @@ megasas_issue_blocked_cmd(struct megasas_instance *instance,
  * @instance:				Adapter soft state
  * @cmd_to_abort:			Previously issued cmd to be aborted
  *
- * MFI firmware can abort previously issued AEN comamnd (automatic event
+ * MFI firmware can abort previously issued AEN command (automatic event
  * notification). The megasas_issue_blocked_abort_cmd() issues such abort
  * cmd and waits for return status.
  * Max wait time is MEGASAS_INTERNAL_CMD_WAIT_TIME secs