Documentation: remove references to /etc/modprobe.conf

Usage of /etc/modprobe.conf file was deprecated by module-init-tools and
is no longer parsed by new kmod tool. References to this file are
replaced in Documentation, comments and Kconfig according to the
context.

There are also some references to the old /etc/modules.conf from 2.4
kernels that are being removed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 files changed, 15 insertions, 14 deletions

diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 423eb26386c..d70ede7a7f9 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -290,8 +290,8 @@ config FARSYNC
 	  Frame Relay or X.25/LAPB.
 
 	  If you want the module to be automatically loaded when the interface
-	  is referenced then you should add "alias hdlcX farsync" to
-	  /etc/modprobe.conf for each interface, where X is 0, 1, 2, ..., or
+	  is referenced then you should add "alias hdlcX farsync" to a file
+	  in /etc/modprobe.d/ for each interface, where X is 0, 1, 2, ..., or
 	  simply use "alias hdlc* farsync" to indicate all of them.
 
 	  To compile this driver as a module, choose M here: the
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 7d48700257a..9328121804b 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -341,10 +341,10 @@ MODULE_PARM_DESC(aic79xx,
 "				(0/256ms,1/128ms,2/64ms,3/32ms)\n"
 "	slowcrc			Turn on the SLOWCRC bit (Rev B only)\n"		 
 "\n"
-"	Sample /etc/modprobe.conf line:\n"
-"		Enable verbose logging\n"
-"		Set tag depth on Controller 2/Target 2 to 10 tags\n"
-"		Shorten the selection timeout to 128ms\n"
+"	Sample modprobe configuration file:\n"
+"	#	Enable verbose logging\n"
+"	#	Set tag depth on Controller 2/Target 2 to 10 tags\n"
+"	#	Shorten the selection timeout to 128ms\n"
 "\n"
 "	options aic79xx 'aic79xx=verbose.tag_info:{{}.{}.{..10}}.seltime:1'\n"
 );
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index c6251bb4f43..5a477cdc780 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -360,10 +360,10 @@ MODULE_PARM_DESC(aic7xxx,
 "	seltime:<int>		Selection Timeout\n"
 "				(0/256ms,1/128ms,2/64ms,3/32ms)\n"
 "\n"
-"	Sample /etc/modprobe.conf line:\n"
-"		Toggle EISA/VLB probing\n"
-"		Set tag depth on Controller 1/Target 1 to 10 tags\n"
-"		Shorten the selection timeout to 128ms\n"
+"	Sample modprobe configuration file:\n"
+"	#	Toggle EISA/VLB probing\n"
+"	#	Set tag depth on Controller 1/Target 1 to 10 tags\n"
+"	#	Shorten the selection timeout to 128ms\n"
 "\n"
 "	options aic7xxx 'aic7xxx=probe_eisa_vl.tag_info:{{}.{.10}}.seltime:1'\n"
 );
diff --git a/drivers/staging/asus_oled/README b/drivers/staging/asus_oled/README
index 0d82a6d5fa5..2d721232467 100644
--- a/drivers/staging/asus_oled/README
+++ b/drivers/staging/asus_oled/README
@@ -52,7 +52,7 @@ Configuration
 
    There is only one option: start_off.
    You can use it by: 'modprobe asus_oled start_off=1', or by adding this
-   line to /etc/modprobe.conf:
+   line to /etc/modprobe.d/asus_oled.conf:
    options asus_oled start_off=1
 
    With this option provided, asus_oled driver will switch off the display
diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c
index 794ecb40017..e1235accab7 100644
--- a/drivers/tty/isicom.c
+++ b/drivers/tty/isicom.c
@@ -102,7 +102,7 @@
  *	You can find the original tools for this direct from Multitech
  *		ftp://ftp.multitech.com/ISI-Cards/
  *
- *	Having installed the cards the module options (/etc/modprobe.conf)
+ *	Having installed the cards the module options (/etc/modprobe.d/)
  *
  *	options isicom   io=card1,card2,card3,card4 irq=card1,card2,card3,card4
  *
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 7c229d30468..ff8605b4b4b 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1724,7 +1724,8 @@ static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv)
 
 /*
  * Module parameter to control latency timer for NDI FTDI-based USB devices.
- * If this value is not set in modprobe.conf.local its value will be set to 1ms.
+ * If this value is not set in /etc/modprobe.d/ its value will be set
+ * to 1ms.
  */
 static int ndi_latency_timer = 1;
 
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index fe2d803a634..7691c866637 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -222,7 +222,7 @@ config USB_LIBUSUAL
 	  for usb-storage and ub drivers, and allows to switch binding
 	  of these devices without rebuilding modules.
 
-	  Typical syntax of /etc/modprobe.conf is:
+	  Typical syntax of /etc/modprobe.d/*conf is:
 
 		options libusual bias="ub"