Merge branch 'upstream-greg' of gregkh@master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

65 files changed, 8082 insertions, 1219 deletions

diff --git a/drivers/net/3c515.c b/drivers/net/3c515.c
index 4532b17e40e..aedfddf20cb 100644
--- a/drivers/net/3c515.c
+++ b/drivers/net/3c515.c
@@ -1003,7 +1003,8 @@ static int corkscrew_start_xmit(struct sk_buff *skb,
 		/* Calculate the next Tx descriptor entry. */
 		int entry = vp->cur_tx % TX_RING_SIZE;
 		struct boom_tx_desc *prev_entry;
-		unsigned long flags, i;
+		unsigned long flags;
+		int i;
 
 		if (vp->tx_full)	/* No room to transmit with */
 			return 1;
diff --git a/drivers/net/82596.c b/drivers/net/82596.c
index 7e2ca957146..257d3bce399 100644
--- a/drivers/net/82596.c
+++ b/drivers/net/82596.c
@@ -899,7 +899,7 @@ memory_squeeze:
 }
 
 
-static inline void i596_cleanup_cmd(struct net_device *dev, struct i596_private *lp)
+static void i596_cleanup_cmd(struct net_device *dev, struct i596_private *lp)
 {
 	struct i596_cmd *ptr;
 
@@ -932,7 +932,8 @@ static inline void i596_cleanup_cmd(struct net_device *dev, struct i596_private
 	lp->scb.cmd = I596_NULL;
 }
 
-static inline void i596_reset(struct net_device *dev, struct i596_private *lp, int ioaddr)
+static void i596_reset(struct net_device *dev, struct i596_private *lp,
+			int ioaddr)
 {
 	unsigned long flags;
 
@@ -1578,7 +1579,7 @@ static int debug = -1;
 module_param(debug, int, 0);
 MODULE_PARM_DESC(debug, "i82596 debug mask");
 
-int init_module(void)
+int __init init_module(void)
 {
 	if (debug >= 0)
 		i596_debug = debug;
@@ -1588,7 +1589,7 @@ int init_module(void)
 	return 0;
 }
 
-void cleanup_module(void)
+void __exit cleanup_module(void)
 {
 	unregister_netdev(dev_82596);
 #ifdef __mc68000__
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 39189903e35..30b3671d833 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1724,6 +1724,20 @@ config VIA_RHINE_MMIO
 
 	  If unsure, say Y.
 
+config VIA_RHINE_NAPI
+	bool "Use Rx Polling (NAPI)"
+	depends on VIA_RHINE
+	help
+	  NAPI is a new driver API designed to reduce CPU and interrupt load
+	  when the driver is receiving lots of packets from the card.
+
+	  If your estimated Rx load is 10kpps or more, or if the card will be
+	  deployed on potentially unfriendly networks (e.g. in a firewall),
+	  then say Y here.
+
+	  See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+	  information.
+
 config LAN_SAA9730
 	bool "Philips SAA9730 Ethernet support (EXPERIMENTAL)"
 	depends on NET_PCI && EXPERIMENTAL && MIPS
@@ -2219,6 +2233,33 @@ config GFAR_NAPI
 	bool "NAPI Support"
 	depends on GIANFAR
 
+config UCC_GETH
+	tristate "Freescale QE UCC GETH"
+	depends on QUICC_ENGINE && UCC_FAST
+	help
+	  This driver supports the Gigabit Ethernet mode of QE UCC.
+	  QE can be found on MPC836x CPUs.
+
+config UGETH_NAPI
+	bool "NAPI Support"
+	depends on UCC_GETH
+
+config UGETH_MAGIC_PACKET
+	bool "Magic Packet detection support"
+	depends on UCC_GETH
+
+config UGETH_FILTERING
+	bool "Mac address filtering support"
+	depends on UCC_GETH
+
+config UGETH_TX_ON_DEMOND
+	bool "Transmit on Demond support"
+	depends on UCC_GETH
+
+config UGETH_HAS_GIGA
+	bool
+	depends on UCC_GETH && MPC836x
+
 config MV643XX_ETH
 	tristate "MV-643XX Ethernet support"
 	depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || PPC_MULTIPLATFORM
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index c91e95126f7..8427bf9dec9 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -18,6 +18,9 @@ gianfar_driver-objs := gianfar.o \
 		gianfar_mii.o \
 		gianfar_sysfs.o
 
+obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o
+ucc_geth_driver-objs := ucc_geth.o ucc_geth_phy.o
+
 #
 # link order important here
 #
diff --git a/drivers/net/ac3200.c b/drivers/net/ac3200.c
index 7952dc6d77e..0fbbcb75af6 100644
--- a/drivers/net/ac3200.c
+++ b/drivers/net/ac3200.c
@@ -370,8 +370,7 @@ MODULE_PARM_DESC(mem, "Memory base address(es)");
 MODULE_DESCRIPTION("Ansel AC3200 EISA ethernet driver");
 MODULE_LICENSE("GPL");
 
-int
-init_module(void)
+int __init init_module(void)
 {
 	struct net_device *dev;
 	int this_dev, found = 0;
diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c
index 1d01ac0000e..ae7f828344d 100644
--- a/drivers/net/appletalk/cops.c
+++ b/drivers/net/appletalk/cops.c
@@ -1030,7 +1030,7 @@ module_param(io, int, 0);
 module_param(irq, int, 0);
 module_param(board_type, int, 0);
 
-int init_module(void)
+int __init init_module(void)
 {
 	if (io == 0)
 		printk(KERN_WARNING "%s: You shouldn't autoprobe with insmod\n",
diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c
index 5d7929c79bc..4ca061c2d5b 100644
--- a/drivers/net/at1700.c
+++ b/drivers/net/at1700.c
@@ -901,7 +901,7 @@ MODULE_PARM_DESC(io, "AT1700/FMV18X I/O base address");
 MODULE_PARM_DESC(irq, "AT1700/FMV18X IRQ number");
 MODULE_PARM_DESC(net_debug, "AT1700/FMV18X debug level (0-6)");
 
-int init_module(void)
+int __init init_module(void)
 {
 	if (io == 0)
 		printk("at1700: You should not use auto-probing with insmod!\n");
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 47eecce35fa..2dcca79b1f6 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -1905,8 +1905,7 @@ MODULE_LICENSE("GPL");
 
 */
 
-int
-init_module(void)
+int __init init_module(void)
 {
 	struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
 	struct net_local *lp;
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 1b758b70713..3d76fa144c4 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -339,6 +339,17 @@ static void dm9000_timeout(struct net_device *dev)
 	spin_unlock_irqrestore(&db->lock,flags);
 }
 
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ *Used by netconsole
+ */
+static void dm9000_poll_controller(struct net_device *dev)
+{
+	disable_irq(dev->irq);
+	dm9000_interrupt(dev->irq,dev,NULL);
+	enable_irq(dev->irq);
+}
+#endif
 
 /* dm9000_release_board
  *
@@ -538,6 +549,9 @@ dm9000_probe(struct platform_device *pdev)
 	ndev->stop		 = &dm9000_stop;
 	ndev->get_stats		 = &dm9000_get_stats;
 	ndev->set_multicast_list = &dm9000_hash_table;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	ndev->poll_controller	 = &dm9000_poll_controller;
+#endif
 
 #ifdef DM9000_PROGRAM_EEPROM
 	program_eeprom(db);
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 583518ae49c..b3b919116e0 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -105,6 +105,33 @@ static int32_t e1000_configure_kmrn_for_10_100(struct e1000_hw *hw,
                                                uint16_t duplex);
 static int32_t e1000_configure_kmrn_for_1000(struct e1000_hw *hw);
 
+static int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw,
+					   uint32_t segment);
+static int32_t e1000_get_software_flag(struct e1000_hw *hw);
+static int32_t e1000_get_software_semaphore(struct e1000_hw *hw);
+static int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw);
+static int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw);
+static int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset,
+				      uint16_t words, uint16_t *data);
+static int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index,
+				    uint8_t* data);
+static int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index,
+				    uint16_t *data);
+static int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr,
+				   uint16_t *data);
+static void e1000_release_software_flag(struct e1000_hw *hw);
+static void e1000_release_software_semaphore(struct e1000_hw *hw);
+static int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw,
+					 uint32_t no_snoop);
+static int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw,
+					    uint32_t index, uint8_t byte);
+static int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset,
+				       uint16_t words, uint16_t *data);
+static int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index,
+				     uint8_t data);
+static int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr,
+				    uint16_t data);
+
 /* IGP cable length table */
 static const
 uint16_t e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] =
@@ -3233,7 +3260,7 @@ e1000_shift_in_mdi_bits(struct e1000_hw *hw)
     return data;
 }
 
-int32_t
+static int32_t
 e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask)
 {
     uint32_t swfw_sync = 0;
@@ -3277,7 +3304,7 @@ e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask)
     return E1000_SUCCESS;
 }
 
-void
+static void
 e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask)
 {
     uint32_t swfw_sync;
@@ -3575,7 +3602,7 @@ e1000_write_phy_reg_ex(struct e1000_hw *hw,
     return E1000_SUCCESS;
 }
 
-int32_t
+static int32_t
 e1000_read_kmrn_reg(struct e1000_hw *hw,
                     uint32_t reg_addr,
                     uint16_t *data)
@@ -3608,7 +3635,7 @@ e1000_read_kmrn_reg(struct e1000_hw *hw,
     return E1000_SUCCESS;
 }
 
-int32_t
+static int32_t
 e1000_write_kmrn_reg(struct e1000_hw *hw,
                      uint32_t reg_addr,
                      uint16_t data)
@@ -3839,7 +3866,7 @@ e1000_phy_powerdown_workaround(struct e1000_hw *hw)
 *
 * hw - struct containing variables accessed by shared code
 ******************************************************************************/
-int32_t
+static int32_t
 e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw)
 {
     int32_t ret_val;
@@ -4086,7 +4113,7 @@ e1000_phy_igp_get_info(struct e1000_hw *hw,
 * hw - Struct containing variables accessed by shared code
 * phy_info - PHY information structure
 ******************************************************************************/
-int32_t
+static int32_t
 e1000_phy_ife_get_info(struct e1000_hw *hw,
                        struct e1000_phy_info *phy_info)
 {
@@ -5643,6 +5670,7 @@ e1000_init_rx_addrs(struct e1000_hw *hw)
  * for the first 15 multicast addresses, and hashes the rest into the
  * multicast table.
  *****************************************************************************/
+#if 0
 void
 e1000_mc_addr_list_update(struct e1000_hw *hw,
                           uint8_t *mc_addr_list,
@@ -5719,6 +5747,7 @@ e1000_mc_addr_list_update(struct e1000_hw *hw,
     }
     DEBUGOUT("MC Update Complete\n");
 }
+#endif  /*  0  */
 
 /******************************************************************************
  * Hashes an address to determine its location in the multicast table
@@ -6587,6 +6616,7 @@ e1000_get_bus_info(struct e1000_hw *hw)
  * hw - Struct containing variables accessed by shared code
  * offset - offset to read from
  *****************************************************************************/
+#if 0
 uint32_t
 e1000_read_reg_io(struct e1000_hw *hw,
                   uint32_t offset)
@@ -6597,6 +6627,7 @@ e1000_read_reg_io(struct e1000_hw *hw,
     e1000_io_write(hw, io_addr, offset);
     return e1000_io_read(hw, io_data);
 }
+#endif  /*  0  */
 
 /******************************************************************************
  * Writes a value to one of the devices registers using port I/O (as opposed to
@@ -7909,6 +7940,7 @@ e1000_set_pci_express_master_disable(struct e1000_hw *hw)
  * returns: - none.
  *
  ***************************************************************************/
+#if 0
 void
 e1000_enable_pciex_master(struct e1000_hw *hw)
 {
@@ -7923,6 +7955,7 @@ e1000_enable_pciex_master(struct e1000_hw *hw)
     ctrl &= ~E1000_CTRL_GIO_MASTER_DISABLE;
     E1000_WRITE_REG(hw, CTRL, ctrl);
 }
+#endif  /*  0  */
 
 /*******************************************************************************
  *
@@ -8148,7 +8181,7 @@ e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw)
  *            E1000_SUCCESS at any other case.
  *
  ***************************************************************************/
-int32_t
+static int32_t
 e1000_get_software_semaphore(struct e1000_hw *hw)
 {
     int32_t timeout = hw->eeprom.word_size + 1;
@@ -8183,7 +8216,7 @@ e1000_get_software_semaphore(struct e1000_hw *hw)
  * hw: Struct containing variables accessed by shared code
  *
  ***************************************************************************/
-void
+static void
 e1000_release_software_semaphore(struct e1000_hw *hw)
 {
     uint32_t swsm;
@@ -8265,7 +8298,7 @@ e1000_arc_subsystem_valid(struct e1000_hw *hw)
  * returns: E1000_SUCCESS
  *
  *****************************************************************************/
-int32_t
+static int32_t
 e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop)
 {
     uint32_t gcr_reg = 0;
@@ -8306,7 +8339,7 @@ e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop)
  * hw: Struct containing variables accessed by shared code
  *
  ***************************************************************************/
-int32_t
+static int32_t
 e1000_get_software_flag(struct e1000_hw *hw)
 {
     int32_t timeout = PHY_CFG_TIMEOUT;
@@ -8345,7 +8378,7 @@ e1000_get_software_flag(struct e1000_hw *hw)
  * hw: Struct containing variables accessed by shared code
  *
  ***************************************************************************/
-void
+static void
 e1000_release_software_flag(struct e1000_hw *hw)
 {
     uint32_t extcnf_ctrl;
@@ -8369,6 +8402,7 @@ e1000_release_software_flag(struct e1000_hw *hw)
  * hw: Struct containing variables accessed by shared code
  *
  ***************************************************************************/
+#if 0
 int32_t
 e1000_ife_disable_dynamic_power_down(struct e1000_hw *hw)
 {
@@ -8388,6 +8422,7 @@ e1000_ife_disable_dynamic_power_down(struct e1000_hw *hw)
 
     return ret_val;
 }
+#endif  /*  0  */
 
 /***************************************************************************
  *
@@ -8397,6 +8432,7 @@ e1000_ife_disable_dynamic_power_down(struct e1000_hw *hw)
  * hw: Struct containing variables accessed by shared code
  *
  ***************************************************************************/
+#if 0
 int32_t
 e1000_ife_enable_dynamic_power_down(struct e1000_hw *hw)
 {
@@ -8416,6 +8452,7 @@ e1000_ife_enable_dynamic_power_down(struct e1000_hw *hw)
 
     return ret_val;
 }
+#endif  /*  0  */
 
 /******************************************************************************
  * Reads a 16 bit word or words from the EEPROM using the ICH8's flash access
@@ -8426,7 +8463,7 @@ e1000_ife_enable_dynamic_power_down(struct e1000_hw *hw)
  * data - word read from the EEPROM
  * words - number of words to read
  *****************************************************************************/
-int32_t
+static int32_t
 e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
                        uint16_t *data)
 {
@@ -8482,7 +8519,7 @@ e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
  * words - number of words to write
  * data - words to write to the EEPROM
  *****************************************************************************/
-int32_t
+static int32_t
 e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
                         uint16_t *data)
 {
@@ -8529,7 +8566,7 @@ e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
  *
  * hw - The pointer to the hw structure
  ****************************************************************************/
-int32_t
+static int32_t
 e1000_ich8_cycle_init(struct e1000_hw *hw)
 {
     union ich8_hws_flash_status hsfsts;
@@ -8596,7 +8633,7 @@ e1000_ich8_cycle_init(struct e1000_hw *hw)
  *
  * hw - The pointer to the hw structure
  ****************************************************************************/
-int32_t
+static int32_t
 e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout)
 {
     union ich8_hws_flash_ctrl hsflctl;
@@ -8631,7 +8668,7 @@ e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout)
  * size - Size of data to read, 1=byte 2=word
  * data - Pointer to the word to store the value read.
  *****************************************************************************/
-int32_t
+static int32_t
 e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
                      uint32_t size, uint16_t* data)
 {
@@ -8710,7 +8747,7 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
  * size - Size of data to read, 1=byte 2=word
  * data - The byte(s) to write to the NVM.
  *****************************************************************************/
-int32_t
+static int32_t
 e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size,
                       uint16_t data)
 {
@@ -8785,7 +8822,7 @@ e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size,
  * index - The index of the byte to read.
  * data - Pointer to a byte to store the value read.
  *****************************************************************************/
-int32_t
+static int32_t
 e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t* data)
 {
     int32_t status = E1000_SUCCESS;
@@ -8808,7 +8845,7 @@ e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t* data)
  * index - The index of the byte to write.
  * byte - The byte to write to the NVM.
  *****************************************************************************/
-int32_t
+static int32_t
 e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte)
 {
     int32_t error = E1000_SUCCESS;
@@ -8839,7 +8876,7 @@ e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte)
  * index - The index of the byte to read.
  * data - The byte to write to the NVM.
  *****************************************************************************/
-int32_t
+static int32_t
 e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t data)
 {
     int32_t status = E1000_SUCCESS;
@@ -8857,7 +8894,7 @@ e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t data)
  * index - The starting byte index of the word to read.
  * data - Pointer to a word to store the value read.
  *****************************************************************************/
-int32_t
+static int32_t
 e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data)
 {
     int32_t status = E1000_SUCCESS;
@@ -8872,6 +8909,7 @@ e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data)
  * index - The starting byte index of the word to read.
  * data - The word to write to the NVM.
  *****************************************************************************/
+#if 0
 int32_t
 e100