Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (31 commits)
  pinctrl: remove unnecessary max pin number
  pinctrl: correct a offset while enumerating pins
  pinctrl: some typo fixes
  pinctrl: rename U300 and SIRF pin controllers
  pinctrl: pass name instead of device to pin_config_*
  pinctrl: add "struct seq_file;" to pinconf.h
  pinctrl: conjure names for unnamed pins
  pinctrl: add a group-specific hog macro
  pinctrl: don't create a device for each pin controller
  arm/u300: don't use PINMUX_MAP_PRIMARY*
  pinctrl: implement PINMUX_MAP_SYS_HOG
  pinctrl: add a pin config interface
  pinctrl/coh901: driver to request its pins
  pinctrl: u300-pinmux: register proper GPIO ranges
  pinctrl: move the U300 GPIO driver to pinctrl
  ARM: u300: localize GPIO assignments
  pinctrl: make it possible to add multiple maps
  pinctrl: make a copy of pinmux map
  pinctrl: GPIO direction support for muxing
  pinctrl: print pin range in GPIO range debugs
  ...

12 files changed, 722 insertions, 178 deletions

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index e3380137b05..573532f7553 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -176,15 +176,6 @@ config GPIO_SCH
 	  The Intel Tunnel Creek processor has 5 GPIOs powered by the
 	  core power rail and 9 from suspend power supply.
 
-config GPIO_U300
-	bool "ST-Ericsson U300 COH 901 335/571 GPIO"
-	depends on GPIOLIB && ARCH_U300
-	help
-	  Say yes here to support GPIO interface on ST-Ericsson U300.
-	  The names of the two IP block variants supported are
-	  COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
-	  ports of 8 GPIO pins each.
-
 config GPIO_VX855
 	tristate "VIA VX855/VX875 GPIO"
 	depends on PCI
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 8ef9e9abe97..62e641e79e8 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -54,7 +54,6 @@ obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o
 obj-$(CONFIG_GPIO_TPS65910)	+= gpio-tps65910.o
 obj-$(CONFIG_GPIO_TPS65912)	+= gpio-tps65912.o
 obj-$(CONFIG_GPIO_TWL4030)	+= gpio-twl4030.o
-obj-$(CONFIG_MACH_U300)		+= gpio-u300.o
 obj-$(CONFIG_GPIO_UCB1400)	+= gpio-ucb1400.o
 obj-$(CONFIG_GPIO_VR41XX)	+= gpio-vr41xx.o
 obj-$(CONFIG_GPIO_VX855)	+= gpio-vx855.o
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index e17e2f8001d..afaf8855812 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -12,7 +12,10 @@ menu "Pin controllers"
 	depends on PINCTRL
 
 config PINMUX
-	bool "Support pinmux controllers"
+	bool "Support pin multiplexing controllers"
+
+config PINCONF
+	bool "Support pin configuration controllers"
 
 config DEBUG_PINCTRL
 	bool "Debug PINCTRL calls"
@@ -20,16 +23,25 @@ config DEBUG_PINCTRL
 	help
 	  Say Y here to add some extra checks and diagnostics to PINCTRL calls.
 
-config PINMUX_SIRF
-	bool "CSR SiRFprimaII pinmux driver"
+config PINCTRL_SIRF
+	bool "CSR SiRFprimaII pin controller driver"
 	depends on ARCH_PRIMA2
 	select PINMUX
 
-config PINMUX_U300
-	bool "U300 pinmux driver"
+config PINCTRL_U300
+	bool "U300 pin controller driver"
 	depends on ARCH_U300
 	select PINMUX
 
+config PINCTRL_COH901
+	bool "ST-Ericsson U300 COH 901 335/571 GPIO"
+	depends on GPIOLIB && ARCH_U300 && PINMUX_U300
+	help
+	  Say yes here to support GPIO interface on ST-Ericsson U300.
+	  The names of the two IP block variants supported are
+	  COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
+	  ports of 8 GPIO pins each.
+
 endmenu
 
 endif
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index bdc548a6b7e..827601cc68f 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -1,8 +1,10 @@
 # generic pinmux support
 
-ccflags-$(CONFIG_DEBUG_PINMUX)	+= -DDEBUG
+ccflags-$(CONFIG_DEBUG_PINCTRL)	+= -DDEBUG
 
 obj-$(CONFIG_PINCTRL)		+= core.o
 obj-$(CONFIG_PINMUX)		+= pinmux.o
-obj-$(CONFIG_PINMUX_SIRF)	+= pinmux-sirf.o
-obj-$(CONFIG_PINMUX_U300)	+= pinmux-u300.o
+obj-$(CONFIG_PINCONF)		+= pinconf.o
+obj-$(CONFIG_PINCTRL_SIRF)	+= pinctrl-sirf.o
+obj-$(CONFIG_PINCTRL_U300)	+= pinctrl-u300.o
+obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index eadef9e191e..569bdb3ef10 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -28,17 +28,12 @@
 #include <linux/pinctrl/machine.h>
 #include "core.h"
 #include "pinmux.h"
+#include "pinconf.h"
 
 /* Global list of pin control devices */
 static DEFINE_MUTEX(pinctrldev_list_mutex);
 static LIST_HEAD(pinctrldev_list);
 
-static void pinctrl_dev_release(struct device *dev)
-{
-	struct pinctrl_dev *pctldev = dev_get_drvdata(dev);
-	kfree(pctldev);
-}
-
 const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev)
 {
 	/* We're not allowed to register devices without name */
@@ -70,14 +65,14 @@ struct pinctrl_dev *get_pinctrl_dev_from_dev(struct device *dev,
 
 	mutex_lock(&pinctrldev_list_mutex);
 	list_for_each_entry(pctldev, &pinctrldev_list, node) {
-		if (dev &&  &pctldev->dev == dev) {
+		if (dev && pctldev->dev == dev) {
 			/* Matched on device pointer */
 			found = true;
 			break;
 		}
 
 		if (devname &&
-		    !strcmp(dev_name(&pctldev->dev), devname)) {
+		    !strcmp(dev_name(pctldev->dev), devname)) {
 			/* Matched on device name */
 			found = true;
 			break;
@@ -88,7 +83,7 @@ struct pinctrl_dev *get_pinctrl_dev_from_dev(struct device *dev,
 	return found ? pctldev : NULL;
 }
 
-struct pin_desc *pin_desc_get(struct pinctrl_dev *pctldev, int pin)
+struct pin_desc *pin_desc_get(struct pinctrl_dev *pctldev, unsigned int pin)
 {
 	struct pin_desc *pindesc;
 	unsigned long flags;
@@ -101,6 +96,31 @@ struct pin_desc *pin_desc_get(struct pinctrl_dev *pctldev, int pin)
 }
 
 /**
+ * pin_get_from_name() - look up a pin number from a name
+ * @pctldev: the pin control device to lookup the pin on
+ * @name: the name of the pin to look up
+ */
+int pin_get_from_name(struct pinctrl_dev *pctldev, const char *name)
+{
+	unsigned i, pin;
+
+	/* The pin number can be retrived from the pin controller descriptor */
+	for (i = 0; i < pctldev->desc->npins; i++) {
+		struct pin_desc *desc;
+
+		pin = pctldev->desc->pins[i].number;
+		desc = pin_desc_get(pctldev, pin);
+		/* Pin space may be sparse */
+		if (desc == NULL)
+			continue;
+		if (desc->name && !strcmp(name, desc->name))
+			return pin;
+	}
+
+	return -EINVAL;
+}
+
+/**
  * pin_is_valid() - check if pin exists on controller
  * @pctldev: the pin control device to check the pin on
  * @pin: pin to check, use the local pin controller index number
@@ -139,6 +159,8 @@ static void pinctrl_free_pindescs(struct pinctrl_dev *pctldev,
 		if (pindesc != NULL) {
 			radix_tree_delete(&pctldev->pin_desc_tree,
 					  pins[i].number);
+			if (pindesc->dynamic_name)
+				kfree(pindesc->name);
 		}
 		kfree(pindesc);
 	}
@@ -160,19 +182,27 @@ static int pinctrl_register_one_pin(struct pinctrl_dev *pctldev,
 	pindesc = kzalloc(sizeof(*pindesc), GFP_KERNEL);
 	if (pindesc == NULL)
 		return -ENOMEM;
+
 	spin_lock_init(&pindesc->lock);
 
 	/* Set owner */
 	pindesc->pctldev = pctldev;
 
 	/* Copy basic pin info */
-	pindesc->name = name;
+	if (pindesc->name) {
+		pindesc->name = name;
+	} else {
+		pindesc->name = kasprintf(GFP_KERNEL, "PIN%u", number);
+		if (pindesc->name == NULL)
+			return -ENOMEM;
+		pindesc->dynamic_name = true;
+	}
 
 	spin_lock(&pctldev->pin_desc_tree_lock);
 	radix_tree_insert(&pctldev->pin_desc_tree, number, pindesc);
 	spin_unlock(&pctldev->pin_desc_tree_lock);
 	pr_debug("registered pin %d (%s) on %s\n",
-		 number, name ? name : "(unnamed)", pctldev->desc->name);
+		 number, pindesc->name, pctldev->desc->name);
 	return 0;
 }
 
@@ -284,21 +314,52 @@ void pinctrl_remove_gpio_range(struct pinctrl_dev *pctldev,
 	mutex_unlock(&pctldev->gpio_ranges_lock);
 }
 
+/**
+ * pinctrl_get_group_selector() - returns the group selector for a group
+ * @pctldev: the pin controller handling the group
+ * @pin_group: the pin group to look up
+ */
+int pinctrl_get_group_selector(struct pinctrl_dev *pctldev,
+			       const char *pin_group)
+{
+	const struct pinctrl_ops *pctlops = pctldev->desc->pctlops;
+	unsigned group_selector = 0;
+
+	while (pctlops->list_groups(pctldev, group_selector) >= 0) {
+		const char *gname = pctlops->get_group_name(pctldev,
+							    group_selector);
+		if (!strcmp(gname, pin_group)) {
+			dev_dbg(pctldev->dev,
+				"found group selector %u for %s\n",
+				group_selector,
+				pin_group);
+			return group_selector;
+		}
+
+		group_selector++;
+	}
+
+	dev_err(pctldev->dev, "does not have pin group %s\n",
+		pin_group);
+
+	return -EINVAL;
+}
+
 #ifdef CONFIG_DEBUG_FS
 
 static int pinctrl_pins_show(struct seq_file *s, void *what)
 {
 	struct pinctrl_dev *pctldev = s->private;
 	const struct pinctrl_ops *ops = pctldev->desc->pctlops;
-	unsigned pin;
+	unsigned i, pin;
 
 	seq_printf(s, "registered pins: %d\n", pctldev->desc->npins);
-	seq_printf(s, "max pin number: %d\n", pctldev->desc->maxpin);
 
-	/* The highest pin number need to be included in the loop, thus <= */
-	for (pin = 0; pin <= pctldev->desc->maxpin; pin++) {
+	/* The pin number can be retrived from the pin controller descriptor */
+	for (i = 0; i < pctldev->desc->npins; i++) {
 		struct pin_desc *desc;
 
+		pin = pctldev->desc->pins[i].number;
 		desc = pin_desc_get(pctldev, pin);
 		/* Pin space may be sparse */
 		if (desc == NULL)
@@ -363,8 +424,11 @@ static int pinctrl_gpioranges_show(struct seq_file *s, void *what)
 	/* Loop over the ranges */
 	mutex_lock(&pctldev->gpio_ranges_lock);
 	list_for_each_entry(range, &pctldev->gpio_ranges, node) {
-		seq_printf(s, "%u: %s [%u - %u]\n", range->id, range->name,
-			   range->base, (range->base + range->npins - 1));
+		seq_printf(s, "%u: %s GPIOS [%u - %u] PINS [%u - %u]\n",
+			   range->id, range->name,
+			   range->base, (range->base + range->npins - 1),
+			   range->pin_base,
+			   (range->pin_base + range->npins - 1));
 	}
 	mutex_unlock(&pctldev->gpio_ranges_lock);
 
@@ -375,11 +439,15 @@ static int pinctrl_devices_show(struct seq_file *s, void *what)
 {
 	struct pinctrl_dev *pctldev;
 
-	seq_puts(s, "name [pinmux]\n");
+	seq_puts(s, "name [pinmux] [pinconf]\n");
 	mutex_lock(&pinctrldev_list_mutex);
 	list_for_each_entry(pctldev, &pinctrldev_list, node) {
 		seq_printf(s, "%s ", pctldev->desc->name);
 		if (pctldev->desc->pmxops)
+			seq_puts(s, "yes ");
+		else
+			seq_puts(s, "no ");
+		if (pctldev->desc->confops)
 			seq_puts(s, "yes");
 		else
 			seq_puts(s, "no");
@@ -444,11 +512,11 @@ static void pinctrl_init_device_debugfs(struct pinctrl_dev *pctldev)
 {
 	static struct dentry *device_root;
 
-	device_root = debugfs_create_dir(dev_name(&pctldev->dev),
+	device_root = debugfs_create_dir(dev_name(pctldev->dev),
 					 debugfs_root);
 	if (IS_ERR(device_root) || !device_root) {
 		pr_warn("failed to create debugfs directory for %s\n",
-			dev_name(&pctldev->dev));
+			dev_name(pctldev->dev));
 		return;
 	}
 	debugfs_create_file("pins", S_IFREG | S_IRUGO,
@@ -458,6 +526,7 @@ static void pinctrl_init_device_debugfs(struct pinctrl_dev *pctldev)
 	debugfs_create_file("gpio-ranges", S_IFREG | S_IRUGO,
 			    device_root, pctldev, &pinctrl_gpioranges_ops);
 	pinmux_init_device_debugfs(device_root, pctldev);
+	pinconf_init_device_debugfs(device_root, pctldev);
 }
 
 static void pinctrl_init_debugfs(void)
@@ -495,7 +564,6 @@ static void pinctrl_init_debugfs(void)
 struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc,
 				    struct device *dev, void *driver_data)
 {
-	static atomic_t pinmux_no = ATOMIC_INIT(0);
 	struct pinctrl_dev *pctldev;
 	int ret;
 
@@ -514,6 +582,16 @@ struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc,
 		}
 	}
 
+	/* If we're implementing pinconfig, check the ops for sanity */
+	if (pctldesc->confops) {
+		ret = pinconf_check_ops(pctldesc->confops);
+		if (ret) {
+			pr_err("%s pin config ops lacks necessary functions\n",
+			       pctldesc->name);
+			return NULL;
+		}
+	}
+
 	pctldev = kzalloc(sizeof(struct pinctrl_dev), GFP_KERNEL);
 	if (pctldev == NULL)
 		return NULL;
@@ -526,18 +604,7 @@ struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc,
 	spin_lock_init(&pctldev->pin_desc_tree_lock);
 	INIT_LIST_HEAD(&pctldev->gpio_ranges);
 	mutex_init(&pctldev->gpio_ranges_lock);
-
-	/* Register device */
-	pctldev->dev.parent = dev;
-	dev_set_name(&pctldev->dev, "pinctrl.%d",
-		     atomic_inc_return(&pinmux_no) - 1);
-	pctldev->dev.release = pinctrl_dev_release;
-	ret = device_register(&pctldev->dev);
-	if (ret != 0) {
-		pr_err("error in device registration\n");
-		goto out_reg_dev_err;
-	}
-	dev_set_drvdata(&pctldev->dev, pctldev);
+	pctldev->dev = dev;
 
 	/* Register all the pins */
 	pr_debug("try to register %d pins on %s...\n",
@@ -547,7 +614,7 @@ struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc,
 		pr_err("error during pin registration\n");
 		pinctrl_free_pindescs(pctldev, pctldesc->pins,
 				      pctldesc->npins);
-		goto out_reg_pins_err;
+		goto out_err;
 	}
 
 	pinctrl_init_device_debugfs(pctldev);
@@ -557,10 +624,8 @@ struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc,
 	pinmux_hog_maps(pctldev);
 	return pctldev;
 
-out_reg_pins_err:
-	device_del(&pctldev->dev);
-out_reg_dev_err:
-	put_device(&pctldev->dev);
+out_err:
+	kfree(pctldev);
 	return NULL;
 }
 EXPORT_SYMBOL_GPL(pinctrl_register);
@@ -584,7 +649,7 @@ void pinctrl_unregister(struct pinctrl_dev *pctldev)
 	/* Destroy descriptor tree */
 	pinctrl_free_pindescs(pctldev, pctldev->desc->pins,
 			      pctldev->desc->npins);
-	device_unregister(&pctldev->dev);
+	kfree(pctldev);
 }
 EXPORT_SYMBOL_GPL(pinctrl_unregister);
 
diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h
index 472fa1341cc..177a3310547 100644
--- a/drivers/pinctrl/core.h
+++ b/drivers/pinctrl/core.h
@@ -9,6 +9,10 @@
  * License terms: GNU General Public License (GPL) version 2
  */
 
+#include <linux/pinctrl/pinconf.h>
+
+struct pinctrl_gpio_range;
+
 /**
  * struct pinctrl_dev - pin control class device
  * @node: node to include this pin controller in the global pin controller list
@@ -34,7 +38,7 @@ struct pinctrl_dev {
 	spinlock_t pin_desc_tree_lock;
 	struct list_head gpio_ranges;
 	struct mutex gpio_ranges_lock;
-	struct device dev;
+	struct device *dev;
 	struct module *owner;
 	void *driver_data;
 #ifdef CONFIG_PINMUX
@@ -48,6 +52,7 @@ struct pinctrl_dev {
  * @pctldev: corresponding pin control device
  * @name: a name for the pin, e.g. the name of the pin/pad/finger on a
  *	datasheet or such
+ * @dynamic_name: if the name of this pin was dynamically allocated
  * @lock: a lock to protect the descriptor structure
  * @mux_requested: whether the pin is already requested by pinmux or not
  * @mux_function: a named muxing function for the pin that will be passed to
@@ -56,6 +61,7 @@ struct pinctrl_dev {
 struct pin_desc {
 	struct pinctrl_dev *pctldev;
 	const char *name;
+	bool dynamic_name;
 	spinlock_t lock;
 	/* These fields only added when supporting pinmux drivers */
 #ifdef CONFIG_PINMUX
@@ -65,7 +71,10 @@ struct pin_desc {
 
 struct pinctrl_dev *get_pinctrl_dev_from_dev(struct device *dev,
 					     const char *dev_name);
-struct pin_desc *pin_desc_get(struct pinctrl_dev *pctldev, int pin);
+struct pin_desc *pin_desc_get(struct pinctrl_dev *pctldev, unsigned int pin);
+int pin_get_from_name(struct pinctrl_dev *pctldev, const char *name);
 int pinctrl_get_device_gpio_range(unsigned gpio,
 				  struct pinctrl_dev **outdev,
 				  struct pinctrl_gpio_range **outrange);
+int pinctrl_get_group_selector(struct pinctrl_dev *pctldev,
+			       const char *pin_group);
diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c
new file mode 100644
index 00000000000..1259872b0a1
--- /dev/null
+++ b/drivers/pinctrl/pinconf.c
@@ -0,0 +1,326 @@
+/*
+ * Core driver for the pin config portions of the pin control subsystem
+ *
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#define pr_fmt(fmt) "pinconfig core: " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf.h>
+#include "core.h"
+#include "pinconf.h"
+
+int pin_config_get_for_pin(struct pinctrl_dev *pctldev, unsigned pin,
+			   unsigned long *config)
+{
+	const struct pinconf_ops *ops = pctldev->desc->confops;
+
+	if (!ops || !ops->pin_config_get) {
+		dev_err(pctldev->dev, "cannot get pin configuration, missing "
+			"pin_config_get() function in driver\n");
+		return -EINVAL;
+	}
+
+	return ops->pin_config_get(pctldev, pin, config);
+}
+
+/**
+ * pin_config_get() - get the configuration of a single pin parameter
+ * @dev_name: name of the pin controller device for this pin
+ * @name: name of the pin to get the config for
+ * @config: the config pointed to by this argument will be filled in with the
+ *	current pin state, it can be used directly by drivers as a numeral, or
+ *	it can be dereferenced to any struct.
+ */
+int pin_config_get(const char *dev_name, const char *name,
+			  unsigned long *config)
+{
+	struct pinctrl_dev *pctldev;
+	int pin;
+
+	pctldev = get_pinctrl_dev_from_dev(NULL, dev_name);
+	if (!pctldev)
+		return -EINVAL;
+
+	pin = pin_get_from_name(pctldev, name);
+	if (pin < 0)
+		return pin;
+
+	return pin_config_get_for_pin(pctldev, pin, config);
+}
+EXPORT_SYMBOL(pin_config_get);
+
+int pin_config_set_for_pin(struct pinctrl_dev *pctldev, unsigned pin,
+			   unsigned long config)
+{
+	const struct pinconf_ops *ops = pctldev->desc->confops;
+	int ret;
+
+	if (!ops || !ops->pin_config_set) {
+		dev_err(pctldev->dev, "cannot configure pin, missing "
+			"config function in driver\n");
+		return -EINVAL;
+	}
+
+	ret = ops->pin_config_set(pctldev, pin, config);
+	if (ret) {
+		dev_err(pctldev->dev,
+			"unable to set pin configuration on pin %d\n", pin);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * pin_config_set() - set the configuration of a single pin parameter
+ * @dev_name: name of pin controller device for this pin
+ * @name: name of the pin to set the config for
+ * @config: the config in this argument will contain the desired pin state, it
+ *	can be used directly by drivers as a numeral, or it can be dereferenced
+ *	to any struct.
+ */
+int pin_config_set(const char *dev_name, const char *name,
+		   unsigned long config)
+{
+	struct pinctrl_dev *pctldev;
+	int pin;
+
+	pctldev = get_pinctrl_dev_from_dev(NULL, dev_name);
+	if (!pctldev)
+		return -EINVAL;
+
+	pin = pin_get_from_name(pctldev, name);
+	if (pin < 0)
+		return pin;
+
+	return pin_config_set_for_pin(pctldev, pin, config);
+}
+EXPORT_SYMBOL(pin_config_set);
+
+int pin_config_group_get(const char *dev_name, const char *pin_group,
+			 unsigned long *config)
+{
+	struct pinctrl_dev *pctldev;
+	const struct pinconf_ops *ops;
+	int selector;
+
+	pctldev = get_pinctrl_dev_from_dev(NULL, dev_name);
+	if (!pctldev)
+		return -EINVAL;
+	ops = pctldev->desc->confops;
+
+	if (!ops || !ops->pin_config_group_get) {
+		dev_err(pctldev->dev, "cannot get configuration for pin "
+			"group, missing group config get function in "
+			"driver\n");
+		return -EINVAL;
+	}
+
+	selector = pinctrl_get_group_selector(pctldev, pin_group);
+	if (selector < 0)
+		return selector;
+
+	return ops->pin_config_group_get(pctldev, selector, config);
+}
+EXPORT_SYMBOL(pin_config_group_get);
+
+
+int pin_config_group_set(const char *dev_name, const char *pin_group,
+			 unsigned long config)
+{
+	struct pinctrl_dev *pctldev;
+	const struct pinconf_ops *ops;
+	const struct pinctrl_ops *pctlops;
+	int selector;
+	const unsigned *pins;
+	unsigned num_pins;
+	int ret;
+	int i;
+
+	pctldev = get_pinctrl_dev_from_dev(NULL, dev_name);
+	if (!pctldev)
+		return -EINVAL;
+	ops = pctldev->desc->confops;
+	pctlops = pctldev->desc->pctlops;
+
+	if (!ops || (!ops->pin_config_group_set && !ops->pin_config_set)) {
+		dev_err(pctldev->dev, "cannot configure pin group, missing "
+			"config function in driver\n");
+		return -EINVAL;
+	}
+
+	selector = pinctrl_get_group_selector(pctldev, pin_group);
+	if (selector < 0)
+		return selector;
+
+	ret = pctlops->get_group_pins(pctldev, selector, &pins, &num_pins);
+	if (ret) {
+		dev_err(pctldev->dev, "cannot configure pin group, error "
+			"getting pins\n");
+		return ret;
+	}
+
+	/*
+	 * If the pin controller supports handling entire groups we use that
+	 * capability.
+	 */
+	if (ops->pin_config_group_set) {
+		ret = ops->pin_config_group_set(pctldev, selector, config);
+		/*
+		 * If the pin controller prefer that a certain group be handled
+		 * pin-by-pin as well, it returns -EAGAIN.
+		 */
+		if (ret != -EAGAIN)
+			return ret;
+	}
+
+	/*
+	 * If the controller cannot handle entire groups, we configure each pin
+	 * individually.
+	 */
+	if (!ops->pin_config_set)
+		return 0;
+
+	for (i = 0; i < num_pins; i++) {
+		ret = ops->pin_config_set(pctldev, pins[i], config);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(pin_config_group_set);
+
+int pinconf_check_ops(const struct pinconf_ops *ops)
+{
+	/* We must be able to read out pin status */
+	if (!ops->pin_config_get && !ops->pin_config_group_get)
+		return -EINVAL;
+	/* We have to be able to config the pins in SOME way */
+	if (!ops->pin_config_set && !ops->pin_config_group_set)
+		return -EINVAL;
+	return 0;
+}
+
+#ifdef CONFIG_DEBUG_FS
+
+static void pinconf_dump_pin(struct pinctrl_dev *pctldev,
+			     struct seq_file *s, int pin)
+{
+	const struct pinconf_ops *ops = pctldev->desc->confops;
+
+	if (ops && ops->pin_config_dbg_show)
+		ops->pin_config_dbg_show(pctldev, s, pin);
+}
+
+static int pinconf_pins_show(struct seq_file *s, void *what)
+{
+	struct pinctrl_dev *pctldev = s->private;
+	unsigned i, pin;
+
+	seq_puts(s, "Pin config settings per pin\n");
+	seq_puts(s, "Format: pin (name): pinmux setting array\n");
+
+	/* The pin number can be retrived from the pin controller descriptor */
+	for (i = 0; pin < pctldev->desc->npins; i++) {
+		struct pin_desc *desc;
+
+		pin = pctldev->desc->pins[i].number;
+		desc = pin_desc_get(pctldev, pin);
+		/* Skip if we cannot search the pin */
+		if (desc == NULL)
+			continue;
+
+		seq_printf(s, "pin %d (%s):", pin,
+			   desc->name ? desc->name : "unnamed");
+
+		pinconf_dump_pin(pctldev, s, pin);
+
+		seq_printf(s, "\n");
+	}
+
+	return 0;
+}
+
+static void pinconf_dump_group(struct pinctrl_dev *pctldev,
+			       struct seq_file *s, unsigned selector,
+			       const char *gname)
+{
+	const struct pinconf_ops *ops = pctldev->desc->confops;
+
+	if (ops && ops->pin_config_group_dbg_show)
+		ops->pin_config_group_dbg_show(pctldev, s, selector);
+}
+
+static int pinconf_groups_show(struct seq_file *s, void *what)
+{
+	struct pinctrl_dev *pctldev = s->private;
+	const struct pinctrl_ops *pctlops = pctldev->desc->pctlops;
+	const struct pinconf_ops *ops = pctldev->desc->confops;
+	unsigned selector = 0;
+
+	if (!ops || !ops->pin_config_group_get)
+		return 0;
+
+	seq_puts(s, "Pin config settings per pin group\n");
+	seq_puts(s, "Format: group (name): pinmux setting array\n");
+
+	while (pctlops->list_groups(pctldev, selector) >= 0) {
+		const char *gname = pctlops->get_group_name(pctldev, selector);
+
+		seq_printf(s, "%u (%s):", selector, gname);
+		pinconf_dump_group(pctldev, s, selector, gname);
+		selector++;
+	}
+
+	return 0;
+}
+
+static int pinconf_pins_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, pinconf_pins_show, inode->i_private);
+}
+
+static int pinconf_groups_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, pinconf_groups_show, inode->i_private);
+}
+
+static const struct file_operations pinconf_pins_ops = {
+	.open		= pinconf_pins_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static const struct file_operations pinconf_groups_ops = {
+	.open		= pinconf_groups_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+void pinconf_init_device_debugfs(struct dentry *devroot,
+			 struct pinctrl_dev *pctldev)
+{
+	debugfs_create_file("pinconf-pins", S_IFREG | S_IRUGO,
+			    devroot, pctldev, &pinconf_pins_ops);
+	debugfs_create_file("pinconf-groups", S_IFREG | S_IRUGO,
+			    devroot, pctldev, &pinconf_groups_ops);
+}
+
+#endif
diff --git a/drivers/pinctrl/pinconf.h b/drivers/pinctrl/pinconf.h
new file mode 100644
index 00000000000..e7dc6165032
--- /dev/null
+++ b/drivers/pinctrl/pinconf.h
@@ -0,0 +1,36 @@
+/*
+ * Internal interface between the core pin control system and the
+ * pin config portions
+ *
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ * Based on bits of regulator core, gpio core and clk core
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifdef CONFIG_PINCONF
+
+int pinconf_check_ops(const struct pinconf_ops *ops);
+void pinconf_init_device_debugfs(struct dentry *devroot,
+				 struct pinctrl_dev *pctldev);
+int pin_config_get_for_pin(struct pinctrl_dev *pctldev, unsigned pin,
+			   unsigned long *config);
+int pin_config_set_for_pin(struct pinctrl_dev *pctldev, unsigned pin,
+			   unsigned long config);
+
+#else
+
+static inline int pinconf_check_ops(const struct pinconf_ops *ops)
+{
+	return 0;
+}
+
+static inline void pinconf_init_device_debugfs(struct dentry *devroot,
+					       struct pinctrl_dev *pctldev)
+{
+}
+
+#endif
diff --git a/drivers/gpio/gpio-u300.c b/drivers/pinctrl/pinctrl-coh901.c
index 4035778852b..69fb7072a23 100644
--- a/drivers/gpio/gpio-u300.c
+++ b/drivers/pinctrl/pinctrl-coh901.c
@@ -22,6 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/list.h>
 #include <linux/slab.h>
+#include <linux/pinctrl/pinmux.h>
 #include <mach/gpio-u300.h>
 
 /*
@@ -351,6 +352,24 @@ static inline struct u300_gpio *to_u300_gpio(struct gpio_chip *chip)
 	return container_of(chip, struct u300_gpio, chip);
 }
 
+static int u300_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	/*
+	 * Map back to global GPIO space and request muxing, the direction
+	 * parameter does not matter for this controller.
+	 */
+	int gpio = chip->base + offset;
+
+	return pinmux_request_gpio(gpio);
+}
+
+static void u300_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	int gpio = chip->base + offset;
+
+	pinmux_free_gpio(gpio);
+}
+
 static int u300_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct u300_gpio *gpio = to_u300_gpio(chip);
@@ -483,6 +502,8 @@ static int u300_gpio_config(struct gpio_chip *chip, unsigned offset,
 static struct gpio_chip u300_gpio_chip = {
 	.label			= "u300-gpio-chip",
 	.owner			= THIS_MODULE,
+	.request		= u300_gpio_request,
+	.free			= u300_gpio_free,
 	.get			= u300_gpio_get,
 	.set			= u300_gpio_set,
 	.direction_input	= u300_gpio_direction_input,
diff --git a/drivers/pinctrl/pinmux-sirf.c b/drivers/pinctrl/pinctrl-sirf.c
index d76cae62095..6b3534cc051 100644
--- a/drivers/pinctrl/pinmux-sirf.c
+++ b/drivers/pinctrl/pinctrl-sirf.c
@@ -463,7 +463,7 @@ static const struct sirfsoc_padmux spi1_padmux = {
 	.funcval = BIT(8),
 };
 
-static const unsigned spi1_pins[] = { 33, 34, 35, 36 };
+static const unsigned spi1_pins[] = { 43, 44, 45, 46 };
 
 static const struct sirfsoc_muxmask sdmmc1_muxmask[] = {
 	{
@@ -1067,7 +1067,7 @@ static int sirfsoc_pinmux_request_gpio(struct pinctrl_dev *pmxdev,
 	spmx = pinctrl_dev_get_drvdata(pmxdev);
 
 	muxval = readl(spmx->gpio_virtbase + SIRFSOC_GPIO_PAD_EN(group));
-	muxval = muxval | (1 << offset);
+	muxval = muxval | (1 << (offset - range->pin_base));
 	writel(muxval, spmx->gpio_virtbase + SIRFSOC_GPIO_PAD_EN(group));
 
 	return 0;
@@ -1086,7 +1086,6 @@ static struct pinctrl_desc sirfsoc_pinmux_desc = {
 	.name = DRIVER_NAME,
 	.pins = sirfsoc_pads,
 	.npins = ARRAY_SIZE(sirfsoc_pads),
-	.maxpin = SIRFSOC_NUM_PADS - 1,
 	.pctlops = &sirfsoc_pctrl_ops,
 	.pmxops = &sirfsoc_pinmux_ops,
 	.owner = THIS_MODULE,
@@ -1100,21 +1099,25 @@ static struct pinctrl_gpio_range sirfsoc_gpio_ranges[] = {
 		.name = "sirfsoc-gpio*",
 		.id = 0,
 		.base = 0,
+		.pin_base = 0,
 		.npins = 32,
 	}, {
 		.name = "sirfsoc-gpio*",
 		.id = 1,
 		.base = 32,
+		.pin_base = 32,
 		.npins = 32,
 	}, {
 		.name = "sirfsoc-gpio*",
 		.id = 2,
 		.base = 64,
+		.pin_base = 64,
 		.npins = 32,
 	}, {
 		.name = "sirfsoc-gpio*",
 		.id = 3,
 		.base = 96,
+		.pin_base = 96,
 		.npins = 19,
 	},
 };
diff --git a/drivers/pinctrl/pinmux-u300.c b/drivers/pinctrl/pinctrl-u300.c
index 4858a64131f..c8d02f1c2b5 100644
--- a/drivers/pinctrl/pinmux-u300.c
+++ b/drivers/pinctrl/pinctrl-u300.c
@@ -940,20 +940,23 @@ static void u300_pmx_endisable(struct u300_pmx *upmx, unsigned selector,
 {
 	u16 regval, val, mask;
 	int i;
+	const struct u300_pmx_mask *upmx_mask;
 
+	upmx_mask = u300_pmx_functions[selector].mask;
 	for (i = 0; i < ARRAY_SIZE(u300_pmx_registers); i++) {
 		if (enable)
-			val = u300_pmx_functions[selector].mask->bits;
+			val = upmx_mask->bits;
 		else
 			val = 0;
 
-		mask = u300_pmx_functions[selector].mask->mask;
+		mask = upmx_mask->mask;
 		if (mask != 0) {
 			regval = readw(upmx->virtbase + u300_pmx_registers[i]);
 			regval &= ~mask;
 			regval |= val;
 			writew(regval, upmx->virtbase + u300_pmx_registers[i]);
 		}
+		upmx_mask++;
 	}
 }
 
@@ -1016,21 +1019,35 @@ static struct pinmux_ops u300_pmx_ops = {
 };
 
 /*
- * FIXME: this will be set to sane values as this driver engulfs
- * drivers/gpio/gpio-u300.c and we really know this stuff.
+ * GPIO ranges handled by the application-side COH901XXX GPIO controller
+ * Very many pins can be converted into GPIO pins, but we only list those
+ * that are useful in practice to cut down on tables.
  */
-static struct pinctrl_gpio_range u300_gpio_range = {
-	.name = "COH901*",
-	.id = 0,
-	.base = 0,
-	.npins = 64,
+#define U300_GPIO_RANGE(a, b, c) { .name = "COH901XXX", .id = a, .base= a, \
+			.pin_base = b, .npins = c }
+
+static struct pinctrl_gpio_range u300_gpio_ranges[] = {
+	U300_GPIO_RANGE(10, 426, 1),
+	U300_GPIO_RANGE(11, 180, 1),
+	U300_GPIO_RANGE(12, 165, 1), /* MS/MMC card insertion */
+	U300_GPIO_RANGE(13, 179, 1),
+	U300_GPIO_RANGE(14, 178, 1),
+	U300_GPIO_RANGE(16, 194, 1),
+	U300_GPIO_RANGE(17, 193, 1),
+	U300_GPIO_RANGE(18, 192, 1),
+	U300_GPIO_RANGE(19, 191, 1),
+	U300_GPIO_RANGE(20, 186, 1),
+	U300_GPIO_RANGE(21, 185, 1),
+	U300_GPIO_RANGE(22, 184, 1),
+	U300_GPIO_RANGE(23, 183, 1),
+	U300_GPIO_RANGE(24, 182, 1),
+	U300_GPIO_RANGE(25, 181, 1),
 };
 
 static struct pinctrl_desc u300_pmx_desc = {
 	.name = DRIVER_NAME,
 	.pins = u300_pads,
 	.npins = ARRAY_SIZE(u300_pads),
-	.maxpin = U300_NUM_PADS-1,
 	.pctlops = &u300_pctrl_ops,
 	.pmxops = &u300_pmx_ops,
 	.owner = THIS_MODULE,
@@ -1038,9 +1055,10 @@ static struct pinctrl_desc u300_pmx_desc = {
 
 static int __init u300_pmx_probe(struct platform_device *pdev)
 {
-	int ret;
 	struct u300_pmx *upmx;
 	struct resource *res;
+	int ret;
+	int i;
 
 	/* Create state holders etc for this driver */
 	upmx = devm_kzalloc(&pdev->dev, sizeof(*upmx), GFP_KERNEL);
@@ -1077,7 +1095,8 @@ static int __init u300_pmx_probe(struct platform_device *pdev)
 	}
 
 	/* We will handle a range of GPIO pins */
-	pinctrl_add_gpio_range(upmx->pctl, &u300_gpio_range);
+	for (i = 0; i < ARRAY_SIZE(u300_gpio_ranges); i++)
+		pinctrl_add_gpio_range(upmx->pctl, &u300_gpio_ranges[i]);
 
 	platform_set_drvdata(pdev, upmx);
 
@@ -1099,8 +1118,10 @@ out_no_resource:
 static int __exit u300_pmx_remove(struct platform_device *pdev)
 {
 	struct u300_pmx *upmx = platform_get_drvdata(pdev);
+	int i;
 
-	pinctrl_remove_gpio_range(upmx->pctl, &u300_gpio_range);
+	for (i = 0; i < ARRAY_SIZE(u300_gpio_ranges); i++)
+		pinctrl_remove_gpio_range(upmx->pctl, &u300_gpio_ranges[i]);
 	pinctrl_unregister(upmx->pctl);
 	iounmap(upmx->virtbase);
 	release_mem_region(upmx->phybase, upmx->physize);
diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c
index a5467f8709e..a76a348321b 100644
--- a/drivers/pinctrl/pinmux.c
+++ b/drivers/pinctrl/pinmux.c
@@ -21,6 +21,7 @@
 #include <linux/list.h>
 #include <linux/mutex.h>
 #include <linux/spinlock.h>
+#include <linux/string.h>
 #include <linux/sysfs.h>
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
@@ -32,12 +33,8 @@
 static DEFINE_MUTEX(pinmux_list_mutex);
 static LIST_HEAD(pinmux_list);
 
-/* List of pinmux hogs */
-static DEFINE_MUTEX(pinmux_hoglist_mutex);
-static LIST_HEAD(pinmux_hoglist);
-
-/* Global pinmux maps, we allow one set only */
-static struct pinmux_map const *pinmux_maps;
+/* Global pinmux maps */
+static struct pinmux_map *pinmux_maps;
 static unsigned pinmux_maps_num;
 
 /**
@@ -98,41 +95,35 @@ struct pinmux_hog {
  * @function: a functional name to give to this pin, passed to the driver
  *	so it knows what function to mux in, e.g. the string "gpioNN"
  *	means that you want to mux in the pin for use as GPIO number NN
- * @gpio: if this request concerns a single GPIO pin
  * @gpio_range: the range matching the GPIO pin if this is a request for a
  *	single GPIO pin
  */
 static int pin_request(struct pinctrl_dev *pctldev,
-		       int pin, const char *function, bool gpio,
+		       int pin, const char *function,
 		       struct pinctrl_gpio_range *gpio_range)
 {
 	struct pin_desc *desc;
 	const struct pinmux_ops *ops = pctldev->desc->pmxops;
 	int status = -EINVAL;
 
-	dev_dbg(&pctldev->dev, "request pin %d for %s\n", pin, function);
-
-	if (!pin_is_valid(pctldev, pin)) {
-		dev_err(&pctldev->dev, "pin is invalid\n");
-		return -EINVAL;
-	}
-
-	if (!function) {
-		dev_err(&pctldev->dev, "no function name given\n");
-		return -EINVAL;
-	}
+	dev_dbg(pctldev->dev, "request pin %d for %s\n", pin, function);
 
 	desc = pin_desc_get(pctldev, pin);
 	if (desc == NULL) {
-		dev_err(&pctldev->dev,
+		dev_err(pctldev->dev,
 			"pin is not registered so it cannot be requested\n");
 		goto out;
 	}
 
+	if (!function) {
+		dev_err(pctldev->dev, "no function name given\n");
+		return -EINVAL;
+	}
+
 	spin_lock(&desc->lock);
 	if (desc->mux_function) {
 		spin_unlock(&desc->lock);
-		dev_err(&pctldev->dev,
+		dev_err(pctldev->dev,
 			"pin already requested\n");
 		goto out;
 	}
@@ -141,7 +132,7 @@ static int pin_request(struct pinctrl_dev *pctldev,
 
 	/* Let each pin increase references to this module */
 	if (!try_module_get(pctldev->owner)) {
-		dev_err(&pctldev->dev,
+		dev_err(pctldev->dev,
 			"could not increase module refcount for pin %d\n",
 			pin);
 		status = -EINVAL;
@@ -152,7 +143,7 @@ static int pin_request(struct pinctrl_dev *pctldev,
 	 * If there is no kind of request function for the pin we just assume
 	 * we got it by default and proceed.
 	 */
-	if (gpio && ops->gpio_request_enable)
+	if (gpio_range && ops->gpio_request_enable)
 		/* This requests and enables a single GPIO pin */
 		status = ops->gpio_request_enable(pctldev, gpio_range, pin);
 	else if (ops->request)
@@ -161,7 +152,7 @@ static int pin_request(struct pinctrl_dev *pctldev,
 		status = 0;
 
 	if (status)
-		dev_err(&pctldev->dev, "->request on device %s failed "
+		dev_err(pctldev->dev, "->request on device %s failed "
 		       "for pin %d\n",
 		       pctldev->desc->name, pin);
 out_free_pin:
@@ -172,7 +163,7 @@ out_free_pin:
 	}
 out:
 	if (status)
-		dev_err(&pctldev->dev, "pin-%d (%s) status %d\n",
+		dev_err(pctldev->dev, "pin-%d (%s) status %d\n",
 		       pin, function ? : "?", status);
 
 	return status;
@@ -182,34 +173,52 @@ out:
  * pin_free() - release a single muxed in pin so something else can be muxed
  * @pctldev: pin controller device handling this pin
  * @pin: the pin to free
- * @free_func: whether to free the pin's assigned function name string
+ * @gpio_range: the range matching the GPIO pin if this is a request for a
+ *	single GPIO pin
+ *
+ * This function returns a pointer to the function name in use. This is used
+ * for callers that dynamically allocate a function name so it can be freed
+ * once the pin is free. This is done for GPIO request functions.
  */
-static void pin_free(struct pinctrl_dev *pctldev, int pin, int free_func)
+static const char *pin_free(struct pinctrl_dev *pctldev, int pin,
+			    struct pinctrl_gpio_range *gpio_range)
 {
 	const struct pinmux_ops *ops = pctldev->desc->pmxops;
 	struct pin_desc *desc;
+	const char *func;
 
 	desc = pin_desc_get(pctldev, pin);
 	if (desc == NULL) {
-		dev_err(&pctldev->dev,
+		dev_err(pctldev->dev,
 			"pin is not registered so it cannot be freed\n");
-		return;
+		return NULL;
 	}
 
-	if (ops->free)
+	/*
+	 * If there is no kind of request function for the pin we just assume
+	 * we got it by default and proceed.
+	 */
+	if (gpio_range && ops->gpio_disable_free)
+		ops->gpio_disable_free(pctldev, gpio_range, pin);
+	else if (ops->free)
 		ops->free(pctldev, pin);
 
 	spin_lock(&desc->lock);
-	if (free_func)
-		kfree(desc->mux_function);
+	func = desc->mux_function;
 	desc->mux_function = NULL;
 	spin_unlock(&desc->lock);
 	module_put(pctldev->owner);
+
+	return func;
 }
 
 /**
  * pinmux_request_gpio() - request a single pin to be muxed in as GPIO
  * @gpio: the GPIO pin number from the GPIO subsystem number space
+ *
+ * This function should *ONLY* be used from gpiolib-based GPIO drivers,
+ * as part of their gpio_request() semantics, platforms and individual drivers
+ * shall *NOT* request GPIO pins to be muxed in.
  */
 int pinmux_request_gpio(unsigned gpio)
 {
@@ -225,7 +234,7 @@ int pinmux_request_gpio(unsigned gpio)
 		return -EINVAL;
 
 	/* Convert to the pin controllers number space */
-	pin = gpio - range->base;
+	pin = gpio - range->base + range->pin_base;
 
 	/* Conjure some name stating what chip and pin this is taken by */
 	snprintf(gpiostr, 15, "%s:%d", range->name, gpio);
@@ -234,7 +243,7 @@ int pinmux_request_gpio(unsigned gpio)
 	if (!function)
 		return -EINVAL;
 
-	ret = pin_request(pctldev, pin, function, true, range);
+	ret = pin_request(pctldev, pin, function, range);
 	if (ret < 0)
 		kfree(function);
 
@@ -245,6 +254,10 @@ EXPORT_SYMBOL_GPL(pinmux_request_gpio);
 /**
  * pinmux_free_gpio() - free a single pin, currently used as GPIO
  * @gpio: the GPIO pin number from the GPIO subsystem number space
+ *
+ * This function should *ONLY* be used from gpiolib-based GPIO drivers,
+ * as part of their gpio_free() semantics, platforms and individual drivers
+ * shall *NOT* request GPIO pins to be muxed out.
  */
 void pinmux_free_gpio(unsigned gpio)
 {
@@ -252,53 +265,108 @@ void pinmux_free_gpio(unsigned gpio)
 	struct pinctrl_gpio_range *range;
 	int ret;
 	int pin;
+	const char *func;
 
 	ret = pinctrl_get_device_gpio_range(gpio, &pctldev, &range);
 	if (ret)
 		return;
 
 	/* Convert to the pin controllers number space */
-	pin = gpio - range->base;
+	pin = gpio - range->base + range->pin_base;
 
-	pin_free(pctldev, pin, true);
+	func = pin_free(pctldev, pin, range);
+	kfree(func);
 }
 EXPORT_SYMBOL_GPL(pinmux_free_gpio);
 
+static int pinmux_gpio_direction(unsigned gpio, bool input)
+{
+	struct pinctrl_dev *pctldev;
+	struct pinctrl_gpio_range *range;
+	const struct pinmux_ops *ops;
+	int ret;
+	int pin;
+
+	ret = pinctrl_get_device_gpio_range(gpio, &pctldev, &range);
+	if (ret)
+		return ret;
+
+	ops = pctldev->desc->pmxops;
+
+	/* Convert to the pin controllers number space */
+	pin = gpio - range->base + range->pin_base;
+
+	if (ops->gpio_set_direction)
+		ret = ops->gpio_set_direction(pctldev, range, pin, input);
+	else
+		ret = 0;
+
+	return ret;
+}
+
+/**
+ * pinmux_gpio_direction_input() - request a GPIO pin to go into input mode
+ * @gpio: the GPIO pin number from the GPIO subsystem number space
+ *
+ * This function should *ONLY* be used from gpiolib-based GPIO drivers,
+ * as part of their gpio_direction_input() semantics, platforms and individual
+ * drivers shall *NOT* touch pinmux GPIO calls.
+ */
+int pinmux_gpio_direction_input(unsigned gpio)
+{
+	return pinmux_gpio_direction(gpio, true);
+}
+EXPORT_SYMBOL_GPL(pinmux_gpio_direction_input);
+
+/**
+ * pinmux_gpio_direction_output() - request a GPIO pin to go into output mode
+ * @gpio: the GPIO pin number from the GPIO subsystem number space
+ *
+ * This function should *ONLY* be used from gpiolib-based GPIO drivers,
+ * as part of their gpio_direction_output() semantics, platforms and individual
+ * drivers shall *NOT* touch pinmux GPIO calls.
+ */
+int pinmux_gpio_direction_output(unsigned gpio)
+{
+	return pinmux_gpio_direction(gpio, false);
+}
+EXPORT_SYMBOL_GPL(pinmux_gpio_direction_output);
+
 /**
  * pinmux_register_mappings() - register a set of pinmux mappings
- * @maps: the pinmux mappings table to register
+ * @maps: the pinmux mappings table to register, this should be marked with
+ *	__initdata so it can be discarded after boot, this function will
+ *	perform a shallow copy for the mapping entries.
  * @num_maps: the number of maps in the mapping table
  *
  * Only call this once during initialization of your machine, the function is
  * tagged as __init and won't be callable after init has completed. The map
  * passed into this function will be owned by the pinmux core and cannot be
- * free:d.
+ * freed.
  */
 int __init pinmux_register_mappings(struct pinmux_map const *maps,
 				    unsigned num_maps)
 {
+	void *tmp_maps;
 	int i;
 
-	if (pinmux_maps != NULL) {
-		pr_err("pinmux mappings already registered, you can only "
-		       "register one set of maps\n");
-		return -EINVAL;
-	}
-
 	pr_debug("add %d pinmux maps\n", num_maps);
+
+	/* First sanity check the new mapping */
 	for (i = 0; i < num_maps; i++) {
-		/* Sanity check the mapping */
 		if (!maps[i].name) {
 			pr_err("failed to register map %d: "
 			       "no map name given\n", i);
 			return -EINVAL;
 		}
+
 		if (!maps[i].ctrl_dev && !maps[i].ctrl_dev_name) {
 			pr_err("failed to register map %s (%d): "
 			       "no pin control device given\n",
 			       maps[i].name, i);
 			return -EINVAL;
 		}
+
 		if (!maps[i].function) {
 			pr_err("failed to register map %s (%d): "
 			       "no function ID given\n", maps[i].name, i);
@@ -315,9 +383,30 @@ int __init pinmux_register_mappings(struct pinmux_map const *maps,
 				 maps[i].function);
 	}
 
-	pinmux_maps = maps;
-	pinmux_maps_num = num_maps;
+	/*
+	 * Make a copy of the map array - string pointers will end up in the
+	 * kernel const section anyway so these do not need to be deep copied.
+	 */
+	if (!pinmux_maps_num) {
+		/* On first call, just copy them */
+		tmp_maps = kmemdup(maps,
+				   sizeof(struct pinmux_map) * num_maps,
+				   GFP_KERNEL);
+		if (!tmp_maps)
+			return -ENOMEM;
+	} else {
+		/* Subsequent calls, reallocate array to new size */
+		size_t oldsize = sizeof(struct pinmux_map) * pinmux_maps_num;
+		size_t newsize = sizeof(struct pinmux_map) * num_maps;
+
+		tmp_maps = krealloc(pinmux_maps, oldsize + newsize, GFP_KERNEL);
+		if (!tmp_maps)
+			return -ENOMEM;
+		memcpy((tmp_maps + oldsize), maps, newsize);
+	}
 
+	pinmux_maps = tmp_maps;
+	pinmux_maps_num += num_maps;
 	return 0;
 }
 
@@ -345,14 +434,14 @@ static int acquire_pins(struct pinctrl_dev *pctldev,
 	if (ret)
 		return ret;
 
-	dev_dbg(&pctldev->dev, "requesting the %u pins from group %u\n",
+	dev_dbg(pctldev->dev, "requesting the %u pins from group %u\n",
 		num_pins, group_selector);
 
 	/* Try to allocate all pins in this group, one by one */
 	for (i = 0; i < num_pins; i++) {
-		ret = pin_request(pctldev, pins[i], func, false, NULL);
+		ret = pin_request(pctldev, pins[i], func, NULL);
 		if (ret) {
-			dev_err(&pctldev->dev,
+			dev_err(pctldev->dev,
 				"could not get pin %d for function %s "
 				"on device %s - conflicting mux mappings?\n",
 				pins[i], func ? : "(undefined)",
@@ -360,7 +449,7 @@ static int acquire_pins(struct pinctrl_dev *pctldev,
 			/* On error release all taken pins */
 			i--; /* this pin just failed */
 			for (; i >= 0; i--)
-				pin_free(pctldev, pins[i], false);
+				pin_free(pctldev, pins[i], NULL);
 			return -ENODEV;
 		}
 	}
@@ -384,44 +473,13 @@ static void release_pins(struct pinctrl_dev *pctldev,
 	ret = pctlops->get_group_pins(pctldev, group_selector,
 				      &pins, &num_pins);
 	if (ret) {
-		dev_err(&pctldev->dev, "could not get pins to release for "
+		dev_err(pctldev->dev, "could not get pins to release for "
 			"group selector %d\n",
 			group_selector);
 		return;
 	}
 	for (i = 0; i < num_pins; i++)
-		pin_free(pctldev, pins[i], false);
-}
-
-/**
- * pinmux_get_group_selector() - returns the group selector for a group
- * @pctldev: the pin controller handling the group
- * @pin_group: the pin group to look up
- */
-static int pinmux_get_group_selector(struct pinctrl_dev *pctldev,
-				     const char *pin_group)
-{
-	const struct pinctrl_ops *pctlops = pctldev->desc->pctlops;
-	unsigned group_selector = 0;
-
-	while (pctlops->list_groups(pctldev, group_selector) >= 0) {
-		const char *gname = pctlops->get_group_name(pctldev,
-							    group_selector);
-		if (!strcmp(gname, pin_group)) {
-			dev_dbg(&pctldev->dev,
-				"found group selector %u for %s\n",
-				group_selector,
-				pin_group);
-			return group_selector;
-		}
-
-		group_selector++;
-	}
-
-	dev_err(&pctldev->dev, "does not have pin group %s\n",
-		pin_group);
-
-	return -EINVAL;
+		pin_free(pctldev, pins[i], NULL);
 }
 
 /**
@@ -465,9 +523,9 @@ static int pinmux_check_pin_group(struct pinctrl_dev *pctldev,
 			return ret;
 		if (num_groups < 1)
 			return -EINVAL;
-		ret = pinmux_get_group_selector(pctldev, groups[0]);
+		ret = pinctrl_get_group_selector(pctldev, groups[0]);
 		if (ret < 0) {
-			dev_err(&pctldev->dev,
+			dev_err(pctldev->dev,
 				"function %s wants group %s but the pin "
 				"controller does not seem to have that group\n",
 				pmxops->get_function_name(pctldev, func_selector),
@@ -476,7 +534,7 @@ static int pinmux_check_pin_group(struct pinctrl_dev *pctldev,
 		}
 
 		if (num_groups > 1)
-			dev_dbg(&pctldev->dev,
+			dev_dbg(pctldev->dev,
 				"function %s support more than one group, "
 				"default-selecting first group %s (%d)\n",
 				pmxops->get_function_name(pctldev, func_selector),
@@ -486,13 +544,13 @@ static int pinmux_check_pin_group(struct pinctrl_dev *pctldev,
 		return ret;
 	}
 
-	dev_dbg(&pctldev->dev,
+	dev_dbg(pctldev->dev,
 		"check if we have pin group %s on controller %s\n",
 		pin_group, pinctrl_dev_get_name(pctldev));
 
-	ret = pinmux_get_group_selector(pctldev, pin_group);
+	ret = pinctrl_get_group_selector(pctldev, pin_group);
 	if (ret < 0) {
-		dev_dbg(&pctldev->dev,
+		dev_dbg(pctldev->dev,
 			"%s does not support pin group %s with function %s\n",
 			pinctrl_dev_get_name(pctldev),
 			pin_group,
@@ -569,7 +627,7 @@ static int pinmux_enable_muxmap(struct pinctrl_dev *pctldev,
 	 */
 
 	if (pmx->pctldev && pmx->pctldev != pctldev) {
-		dev_err(&pctldev->dev,
+		dev_err(pctldev->dev,
 			"different pin control devices given for device %s, "
 			"function %s\n",
 			devname,
@@ -592,7 +650,7 @@ static int pinmux_enable_muxmap(struct pinctrl_dev *pctldev,
 	 */
 	if (pmx->func_selector != UINT_MAX &&
 	    pmx->func_selector != func_selector) {
-		dev_err(&pctldev->dev,
+		dev_err(pctldev->dev,
 			"dual function defines in the map for device %s\n",
 		       devname);
 		return -EINVAL;
@@ -698,7 +756,7 @@ struct pinmux *pinmux_get(struct device *dev, const char *name)
 		}
 
 		pr_debug("in map, found pctldev %s to handle function %s",
-			 dev_name(&pctldev->dev), map->function);
+			 dev_name(pctldev->dev), map->function);
 
 
 		/*
@@ -874,7 +932,7 @@ static int pinmux_hog_map(struct pinctrl_dev *pctldev,
 		 * without any problems, so then we can hog pinmuxes for
 		 * all devices that just want a static pin mux at this point.
 		 */
-		dev_err(&pctldev->dev, "map %s wants to hog a non-system "
+		dev_err(pctldev->dev, "map %s wants to hog a non-system "
 			"pinmux, this is not going to work\n", map->name);
 		return -EINVAL;
 	}
@@ -886,7 +944,7 @@ static int pinmux_hog_map(struct pinctrl_dev *pctldev,
 	pmx = pinmux_get(NULL, map->name);
 	if (IS_ERR(pmx)) {
 		kfree(hog);
-		dev_err(&pctldev->dev,
+		dev_err(pctldev->dev,
 			"could not get the %s pinmux mapping for hogging\n",
 			map->name);
 		return PTR_ERR(pmx);
@@ -896,7 +954,7 @@ static int pinmux_hog_map(struct pinctrl_dev *pctldev,
 	if (ret) {
 		pinmux_put(pmx);
 		kfree(hog);
-		dev_err(&pctldev->dev,
+		dev_err(pctldev->dev,
 			"could not enable the %s pinmux mapping for hogging\n",
 			map->name);
 		return ret;
@@ -905,7 +963,7 @@ static int pinmux_hog_map(struct pinctrl_dev *pctldev,
 	hog->map = map;
 	hog->pmx = pmx;
 
-	dev_info(&pctldev->dev, "hogged map %s, function %s\n", map->name,
+	dev_info(pctldev->dev, "hogged map %s, function %s\n", map->name,
 		 map->function);
 	mutex_lock(&pctldev->pinmux_hogs_lock);
 	list_add(&hog->node, &pctldev->pinmux_hogs);
@@ -924,7 +982,7 @@ static int pinmux_hog_map(struct pinctrl_dev *pctldev,
  */
 int pinmux_hog_maps(struct pinctrl_dev *pctldev)
 {
-	struct device *dev = &pctldev->dev;
+	struct device *dev = pctldev->dev;
 	const char *devname = dev_name(dev);
 	int ret;
 	int i;
@@ -948,7 +1006,7 @@ int pinmux_hog_maps(struct pinctrl_dev *pctldev)
 }
 
 /**
- * pinmux_hog_maps() - unhog specific map entries on controller device
+ * pinmux_unhog_maps() - unhog specific map entries on controller device
  * @pctldev: the pin control device to unhog entries on
  */
 void pinmux_unhog_maps(struct pinctrl_dev *pctldev)
@@ -1005,18 +1063,19 @@ static int pinmux_functions_show(struct seq_file *s, void *what)
 static int pinmux_pins_show(struct seq_file *s, void *what)
 {
 	struct pinctrl_dev *pctldev = s->private;
-	unsigned pin;
+	unsigned i, pin;
 
 	seq_puts(s, "Pinmux settings per pin\n");
 	seq_puts(s, "Format: pin (name): pinmuxfunction\n");
 
-	/* The highest pin number need to be included in the loop, thus <= */
-	for (pin = 0; pin <= pctldev->desc->maxpin; pin++) {
+	/* The pin number can be retrived from the pin controller descriptor */
+	for (i = 0; i < pctldev->desc->npins; i++) {
 
 		struct pin_desc *desc;
 
+		pin = pctldev->desc->pins[i].number;
 		desc = pin_desc_get(pctldev, pin);
-		/* Pin space may be sparse */
+		/* Skip if we cannot search the pin */
 		if (desc == NULL)
 			continue;