diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-10-01 18:19:05 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-10-01 18:19:05 -0700 |
| commit | 61464c8357c8f6b780e4c44f5c79471799c51ca7 (patch) | |
| tree | 4509cf075403965528f380f2f825c46908fb7d4e /drivers | |
| parent | 47061eda2584b9e4516d1e3a9713406a3a559ac8 (diff) | |
| parent | 9cf1c871526cf6bfec2a653e1e068ee72592542c (diff) | |
Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM soc general cleanups from Olof Johansson:
"This is a large branch that contains a handful of different cleanups:
- Fixing up the I/O space remapping on PCI on ARM. This is a series
from Rob Herring that restructures how all pci devices allocate I/O
space, and it's part of the work to allow multiplatform kernels.
- A number of cleanup series for OMAP, moving and removing some
headers, sparse irq rework and in general preparation for
multiplatform.
- Final removal of all non-DT boards for Tegra, it is now
device-tree-only!
- Removal of a stale platform, nxp4008. It's an old mobile chipset
that is no longer in use, and was very likely never really used
with a mainline kernel. We have not been able to find anyone
interested in keeping it around in the kernel.
- Removal of the legacy dmaengine driver on tegra
+ A handful of other things that I haven't described above."
Fix up some conflicts with the staging tree (and because nxp4008 was
removed)
* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits)
ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6
ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus
ARM: mmp: using for_each_set_bit to simplify the code
ARM: tegra: harmony: fix ldo7 regulator-name
ARM: OMAP2+: Make omap4-keypad.h local
ARM: OMAP2+: Make l4_3xxx.h local
ARM: OMAP2+: Make l4_2xxx.h local
ARM: OMAP2+: Make l3_3xxx.h local
ARM: OMAP2+: Make l3_2xxx.h local
ARM: OMAP1: Move irda.h from plat to mach
ARM: OMAP2+: Make hdq1w.h local
ARM: OMAP2+: Make gpmc-smsc911x.h local
ARM: OMAP2+: Make gpmc-smc91x.h local
ARM: OMAP1: Move flash.h from plat to mach
ARM: OMAP2+: Make debug-devices.h local
ARM: OMAP1: Move board-voiceblue.h from plat to mach
ARM: OMAP1: Move board-sx1.h from plat to mach
ARM: OMAP2+: Make omap-wakeupgen.h local
ARM: OMAP2+: Make omap-secure.h local
ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local
...
Diffstat (limited to 'drivers')
56 files changed, 547 insertions, 758 deletions
diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c index ae056182613..2e166277766 100644 --- a/drivers/dma/omap-dma.c +++ b/drivers/dma/omap-dma.c @@ -18,6 +18,8 @@ #include <linux/spinlock.h> #include "virt-dma.h" + +#include <plat/cpu.h> #include <plat/dma.h> struct omap_dmadev { diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 0725d181581..94cbc842fbc 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -25,11 +25,9 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/irqdomain.h> +#include <linux/gpio.h> +#include <linux/platform_data/gpio-omap.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <mach/irqs.h> -#include <asm/gpio.h> #include <asm/mach/irq.h> #define OFF_MODE 1 @@ -385,13 +383,16 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, static int gpio_irq_type(struct irq_data *d, unsigned type) { struct gpio_bank *bank = irq_data_get_irq_chip_data(d); - unsigned gpio; + unsigned gpio = 0; int retval; unsigned long flags; - if (!cpu_class_is_omap2() && d->irq > IH_MPUIO_BASE) +#ifdef CONFIG_ARCH_OMAP1 + if (d->irq > IH_MPUIO_BASE) gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE); - else +#endif + + if (!gpio) gpio = irq_to_gpio(bank, d->irq); if (type & ~IRQ_TYPE_SENSE_MASK) diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index ba126cc0407..1c169324e35 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -3131,46 +3131,6 @@ samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin) } EXPORT_SYMBOL(s3c_gpio_getpull); -/* gpiolib wrappers until these are totally eliminated */ - -void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) -{ - int ret; - - WARN_ON(to); /* should be none of these left */ - - if (!to) { - /* if pull is enabled, try first with up, and if that - * fails, try using down */ - - ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP); - if (ret) - s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN); - } else { - s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE); - } -} -EXPORT_SYMBOL(s3c2410_gpio_pullup); - -void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) -{ - /* do this via gpiolib until all users removed */ - - gpio_request(pin, "temporary"); - gpio_set_value(pin, to); - gpio_free(pin); -} -EXPORT_SYMBOL(s3c2410_gpio_setpin); - -unsigned int s3c2410_gpio_getpin(unsigned int pin) -{ - struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); - unsigned long offs = pin - chip->chip.base; - - return __raw_readl(chip->base + 0x04) & (1 << offs); -} -EXPORT_SYMBOL(s3c2410_gpio_getpin); - #ifdef CONFIG_S5P_GPIO_DRVSTR s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin) { diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index dc5184d5789..d982593d756 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -30,9 +30,6 @@ #include <asm/mach/irq.h> -#include <mach/iomap.h> -#include <mach/suspend.h> - #define GPIO_BANK(x) ((x) >> 5) #define GPIO_PORT(x) (((x) >> 3) & 0x3) #define GPIO_BIT(x) ((x) & 0x7) diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c index 94256fe7bf3..f030880bc9b 100644 --- a/drivers/gpio/gpio-twl4030.c +++ b/drivers/gpio/gpio-twl4030.c @@ -51,6 +51,7 @@ static struct gpio_chip twl_gpiochip; +static int twl4030_gpio_base; static int twl4030_gpio_irq_base; /* genirq interfaces are not available to modules */ @@ -428,8 +429,6 @@ no_irqs: twl_gpiochip.dev = &pdev->dev; if (pdata) { - twl_gpiochip.base = pdata->gpio_base; - /* * NOTE: boards may waste power if they don't set pullups * and pulldowns correctly ... default for non-ULPI pins is @@ -461,15 +460,21 @@ no_irqs: dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret); twl_gpiochip.ngpio = 0; gpio_twl4030_remove(pdev); - } else if (pdata && pdata->setup) { + goto out; + } + + twl4030_gpio_base = twl_gpiochip.base; + + if (pdata && pdata->setup) { int status; status = pdata->setup(&pdev->dev, - pdata->gpio_base, TWL4030_GPIO_MAX); + twl4030_gpio_base, TWL4030_GPIO_MAX); if (status) dev_dbg(&pdev->dev, "setup --> %d\n", status); } +out: return ret; } @@ -481,7 +486,7 @@ static int gpio_twl4030_remove(struct platform_device *pdev) if (pdata && pdata->teardown) { status = pdata->teardown(&pdev->dev, - pdata->gpio_base, TWL4030_GPIO_MAX); + twl4030_gpio_base, TWL4030_GPIO_MAX); if (status) { dev_dbg(&pdev->dev, "teardown --> %d\n", status); return status; diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 970a1612e79..42d9fdd63de 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -551,7 +551,7 @@ config I2C_PMCMSP config I2C_PNX tristate "I2C bus support for Philips PNX and NXP LPC targets" - depends on ARCH_PNX4008 || ARCH_LPC32XX + depends on ARCH_LPC32XX help This driver supports the Philips IP3204 I2C IP block master and/or slave controller diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index 93f147a96b6..2f99613fd67 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -4,13 +4,13 @@ /* Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd * <Peter dot Milne at D hyphen TACQ dot com> * - * With acknowledgements to i2c-algo-ibm_ocp.c by + * With acknowledgements to i2c-algo-ibm_ocp.c by * Ian DaSilva, MontaVista Software, Inc. idasilva@mvista.com * * And i2c-algo-pcf.c, which was created by Simon G. Vogl and Hans Berglund: * * Copyright (C) 1995-1997 Simon G. Vogl, 1998-2000 Hans Berglund - * + * * And which acknowledged Kyösti Mälkki <kmalkki@cc.hut.fi>, * Frodo Looijaard <frodol@dds.nl>, Martin Bailey<mbailey@littlefeet-inc.com> * @@ -39,14 +39,15 @@ #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/io.h> +#include <linux/gpio.h> #include "i2c-iop3xx.h" /* global unit counter */ static int i2c_id; -static inline unsigned char -iic_cook_addr(struct i2c_msg *msg) +static inline unsigned char +iic_cook_addr(struct i2c_msg *msg) { unsigned char addr; @@ -55,38 +56,38 @@ iic_cook_addr(struct i2c_msg *msg) if (msg->flags & I2C_M_RD) addr |= 1; - return addr; + return addr; } -static void +static void iop3xx_i2c_reset(struct i2c_algo_iop3xx_data *iop3xx_adap) { /* Follows devman 9.3 */ __raw_writel(IOP3XX_ICR_UNIT_RESET, iop3xx_adap->ioaddr + CR_OFFSET); __raw_writel(IOP3XX_ISR_CLEARBITS, iop3xx_adap->ioaddr + SR_OFFSET); __raw_writel(0, iop3xx_adap->ioaddr + CR_OFFSET); -} +} -static void +static void iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap) { u32 cr = IOP3XX_ICR_GCD | IOP3XX_ICR_SCLEN | IOP3XX_ICR_UE; - /* + /* * Every time unit enable is asserted, GPOD needs to be cleared * on IOP3XX to avoid data corruption on the bus. */ #if defined(CONFIG_ARCH_IOP32X) || defined(CONFIG_ARCH_IOP33X) if (iop3xx_adap->id == 0) { - gpio_line_set(IOP3XX_GPIO_LINE(7), GPIO_LOW); - gpio_line_set(IOP3XX_GPIO_LINE(6), GPIO_LOW); + gpio_set_value(7, 0); + gpio_set_value(6, 0); } else { - gpio_line_set(IOP3XX_GPIO_LINE(5), GPIO_LOW); - gpio_line_set(IOP3XX_GPIO_LINE(4), GPIO_LOW); + gpio_set_value(5, 0); + gpio_set_value(4, 0); } #endif /* NB SR bits not same position as CR IE bits :-( */ - iop3xx_adap->SR_enabled = + iop3xx_adap->SR_enabled = IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD | IOP3XX_ISR_RXFULL | IOP3XX_ISR_TXEMPTY; @@ -96,23 +97,23 @@ iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap) __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET); } -static void +static void iop3xx_i2c_transaction_cleanup(struct i2c_algo_iop3xx_data *iop3xx_adap) { unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET); - - cr &= ~(IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE | + + cr &= ~(IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE | IOP3XX_ICR_MSTOP | IOP3XX_ICR_SCLEN); __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET); } -/* - * NB: the handler has to clear the source of the interrupt! +/* + * NB: the handler has to clear the source of the interrupt! * Then it passes the SR flags of interest to BH via adap data */ -static irqreturn_t -iop3xx_i2c_irq_handler(int this_irq, void *dev_id) +static irqreturn_t +iop3xx_i2c_irq_handler(int this_irq, void *dev_id) { struct i2c_algo_iop3xx_data *iop3xx_adap = dev_id; u32 sr = __raw_readl(iop3xx_adap->ioaddr + SR_OFFSET); @@ -126,7 +127,7 @@ iop3xx_i2c_irq_handler(int this_irq, void *dev_id) } /* check all error conditions, clear them , report most important */ -static int +static int iop3xx_i2c_error(u32 sr) { int rc = 0; @@ -135,12 +136,12 @@ iop3xx_i2c_error(u32 sr) if ( !rc ) rc = -I2C_ERR_BERR; } if ((sr & IOP3XX_ISR_ALD)) { - if ( !rc ) rc = -I2C_ERR_ALD; + if ( !rc ) rc = -I2C_ERR_ALD; } - return rc; + return rc; } -static inline u32 +static inline u32 iop3xx_i2c_get_srstat(struct i2c_algo_iop3xx_data *iop3xx_adap) { unsigned long flags; @@ -161,8 +162,8 @@ iop3xx_i2c_get_srstat(struct i2c_algo_iop3xx_data *iop3xx_adap) typedef int (* compare_func)(unsigned test, unsigned mask); /* returns 1 on correct comparison */ -static int -iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap, +static int +iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap, unsigned flags, unsigned* status, compare_func compare) { @@ -192,47 +193,47 @@ iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap, } /* - * Concrete compare_funcs + * Concrete compare_funcs */ -static int +static int all_bits_clear(unsigned test, unsigned mask) { return (test & mask) == 0; } -static int +static int any_bits_set(unsigned test, unsigned mask) { return (test & mask) != 0; } -static int +static int iop3xx_i2c_wait_tx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status) { - return iop3xx_i2c_wait_event( - iop3xx_adap, + return iop3xx_i2c_wait_event( + iop3xx_adap, IOP3XX_ISR_TXEMPTY | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD, status, any_bits_set); } -static int +static int iop3xx_i2c_wait_rx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status) { - return iop3xx_i2c_wait_event( - iop3xx_adap, + return iop3xx_i2c_wait_event( + iop3xx_adap, IOP3XX_ISR_RXFULL | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD, status, any_bits_set); } -static int +static int iop3xx_i2c_wait_idle(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status) { - return iop3xx_i2c_wait_event( + return iop3xx_i2c_wait_event( iop3xx_adap, IOP3XX_ISR_UNITBUSY, status, all_bits_clear); } -static int -iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap, +static int +iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap, struct i2c_msg* msg) { unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET); @@ -247,7 +248,7 @@ iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap, } __raw_writel(iic_cook_addr(msg), iop3xx_adap->ioaddr + DBR_OFFSET); - + cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK); cr |= IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE; @@ -257,8 +258,8 @@ iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap, return rc; } -static int -iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte, +static int +iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte, int stop) { unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET); @@ -277,10 +278,10 @@ iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte, rc = iop3xx_i2c_wait_tx_done(iop3xx_adap, &status); return rc; -} +} -static int -iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte, +static int +iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte, int stop) { unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET); @@ -304,19 +305,19 @@ iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte, return rc; } -static int +static int iop3xx_i2c_writebytes(struct i2c_adapter *i2c_adap, const char *buf, int count) { struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data; int ii; int rc = 0; - for (ii = 0; rc == 0 && ii != count; ++ii) + for (ii = 0; rc == 0 && ii != count; ++ii) rc = iop3xx_i2c_write_byte(iop3xx_adap, buf[ii], ii==count-1); return rc; } -static int +static int iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count) { struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data; @@ -325,7 +326,7 @@ iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count) for (ii = 0; rc == 0 && ii != count; ++ii) rc = iop3xx_i2c_read_byte(iop3xx_adap, &buf[ii], ii==count-1); - + return rc; } @@ -336,8 +337,8 @@ iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count) * Each transfer (i.e. a read or a write) is separated by a repeated start * condition. */ -static int -iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg) +static int +iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg) { struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data; int rc; @@ -357,8 +358,8 @@ iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg) /* * master_xfer() - main read/write entry */ -static int -iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, +static int +iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num) { struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data; @@ -375,14 +376,14 @@ iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, } iop3xx_i2c_transaction_cleanup(iop3xx_adap); - + if(ret) return ret; - return im; + return im; } -static u32 +static u32 iop3xx_i2c_func(struct i2c_adapter *adap) { return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; @@ -393,11 +394,11 @@ static const struct i2c_algorithm iop3xx_i2c_algo = { .functionality = iop3xx_i2c_func, }; -static int +static int iop3xx_i2c_remove(struct platform_device *pdev) { struct i2c_adapter *padapter = platform_get_drvdata(pdev); - struct i2c_algo_iop3xx_data *adapter_data = + struct i2c_algo_iop3xx_data *adapter_data = (struct i2c_algo_iop3xx_data *)padapter->algo_data; struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); unsigned long cr = __raw_readl(adapter_data->ioaddr + CR_OFFSET); @@ -419,7 +420,7 @@ iop3xx_i2c_remove(struct platform_device *pdev) return 0; } -static int +static int iop3xx_i2c_probe(struct platform_device *pdev) { struct resource *res; diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index c50fa75416f..b4b65af8612 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -533,7 +533,7 @@ config KEYBOARD_DAVINCI config KEYBOARD_OMAP tristate "TI OMAP keypad support" - depends on (ARCH_OMAP1 || ARCH_OMAP2) + depends on ARCH_OMAP1 select INPUT_MATRIXKMAP help Say Y here if you want to use the OMAP keypad. diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index a0222db4dc8..6d6b1427ae1 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -35,13 +35,9 @@ #include <linux/mutex.h> #include <linux/errno.h> #include <linux/slab.h> -#include <asm/gpio.h> -#include <plat/keypad.h> -#include <plat/menelaus.h> -#include <asm/irq.h> -#include <mach/hardware.h> -#include <asm/io.h> -#include <plat/mux.h> +#include <linux/gpio.h> +#include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/keypad-omap.h> #undef NEW_BOARD_LEARNING_MODE @@ -96,28 +92,8 @@ static u8 get_row_gpio_val(struct omap_kp *omap_kp) static irqreturn_t omap_kp_interrupt(int irq, void *dev_id) { - struct omap_kp *omap_kp = dev_id; - /* disable keyboard interrupt and schedule for handling */ - if (cpu_is_omap24xx()) { - int i; - - for (i = 0; i < omap_kp->rows; i++) { - int gpio_irq = gpio_to_irq(row_gpios[i]); - /* - * The interrupt which we're currently handling should - * be disabled _nosync() to avoid deadlocks waiting - * for this handler to complete. All others should - * be disabled the regular way for SMP safety. - */ - if (gpio_irq == irq) - disable_irq_nosync(gpio_irq); - else - disable_irq(gpio_irq); - } - } else - /* disable keyboard interrupt and schedule for handling */ - omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); tasklet_schedule(&kp_tasklet); @@ -133,33 +109,22 @@ static void omap_kp_scan_keypad(struct omap_kp *omap_kp, unsigned char *state) { int col = 0; - /* read the keypad status */ - if (cpu_is_omap24xx()) { - /* read the keypad status */ - for (col = 0; col < omap_kp->cols; col++) { - set_col_gpio_val(omap_kp, ~(1 << col)); - state[col] = ~(get_row_gpio_val(omap_kp)) & 0xff; - } - set_col_gpio_val(omap_kp, 0); - - } else { - /* disable keyboard interrupt and schedule for handling */ - omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + /* disable keyboard interrupt and schedule for handling */ + omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); - /* read the keypad status */ - omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC); - for (col = 0; col < omap_kp->cols; col++) { - omap_writew(~(1 << col) & 0xff, - OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC); + /* read the keypad status */ + omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC); + for (col = 0; col < omap_kp->cols; col++) { + omap_writew(~(1 << col) & 0xff, + OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC); - udelay(omap_kp->delay); + udelay(omap_kp->delay); - state[col] = ~omap_readw(OMAP1_MPUIO_BASE + - OMAP_MPUIO_KBR_LATCH) & 0xff; - } - omap_writew(0x00, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC); - udelay(2); + state[col] = ~omap_readw(OMAP1_MPUIO_BASE + + OMAP_MPUIO_KBR_LATCH) & 0xff; } + omap_writew(0x00, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC); + udelay(2); } static void omap_kp_tasklet(unsigned long data) @@ -222,14 +187,8 @@ static void omap_kp_tasklet(unsigned long data) mod_timer(&omap_kp_data->timer, jiffies + delay); } else { /* enable interrupts */ - if (cpu_is_omap24xx()) { - int i; - for (i = 0; i < omap_kp_data->rows; i++) - enable_irq(gpio_to_irq(row_gpios[i])); - } else { - omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); - kp_cur_group = -1; - } + omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + kp_cur_group = -1; } } @@ -242,6 +201,7 @@ static ssize_t omap_kp_enable_show(struct device *dev, static ssize_t omap_kp_enable_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { + struct omap_kp *omap_kp = dev_get_drvdata(dev); int state; if (sscanf(buf, "%u", &state) != 1) @@ -253,9 +213,9 @@ static ssize_t omap_kp_enable_store(struct device *dev, struct device_attribute mutex_lock(&kp_enable_mutex); if (state != kp_enable) { if (state) - enable_irq(INT_KEYBOARD); + enable_irq(omap_kp->irq); else - disable_irq(INT_KEYBOARD); + disable_irq(omap_kp->irq); kp_enable = state; } mutex_unlock(&kp_enable_mutex); @@ -289,7 +249,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev) struct omap_kp *omap_kp; struct input_dev *input_dev; struct omap_kp_platform_data *pdata = pdev->dev.platform_data; - int i, col_idx, row_idx, irq_idx, ret; + int i, col_idx, row_idx, ret; unsigned int row_shift, keycodemax; if (!pdata->rows || !pdata->cols || !pdata->keymap_data) { @@ -314,8 +274,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev) omap_kp->input = input_dev; /* Disable the interrupt for the MPUIO keyboard */ - if (!cpu_is_omap24xx()) - omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); if (pdata->delay) omap_kp->delay = pdata->delay; @@ -328,31 +287,8 @@ static int __devinit omap_kp_probe(struct platform_device *pdev) omap_kp->rows = pdata->rows; omap_kp->cols = pdata->cols; - if (cpu_is_omap24xx()) { - /* Cols: outputs */ - for (col_idx = 0; col_idx < omap_kp->cols; col_idx++) { - if (gpio_request(col_gpios[col_idx], "omap_kp_col") < 0) { - printk(KERN_ERR "Failed to request" - "GPIO%d for keypad\n", - col_gpios[col_idx]); - goto err1; - } - gpio_direction_output(col_gpios[col_idx], 0); - } - /* Rows: inputs */ - for (row_idx = 0; row_idx < omap_kp->rows; row_idx++) { - if (gpio_request(row_gpios[row_idx], "omap_kp_row") < 0) { - printk(KERN_ERR "Failed to request" - "GPIO%d for keypad\n", - row_gpios[row_idx]); - goto err2; - } - gpio_direction_input(row_gpios[row_idx]); - } - } else { - col_idx = 0; - row_idx = 0; - } + col_idx = 0; + row_idx = 0; setup_timer(&omap_kp->timer, omap_kp_timer, (unsigned long)omap_kp); @@ -394,27 +330,16 @@ static int __devinit omap_kp_probe(struct platform_device *pdev) /* scan current status and enable interrupt */ omap_kp_scan_keypad(omap_kp, keypad_state); - if (!cpu_is_omap24xx()) { - omap_kp->irq = platform_get_irq(pdev, 0); - if (omap_kp->irq >= 0) { - if (request_irq(omap_kp->irq, omap_kp_interrupt, 0, - "omap-keypad", omap_kp) < 0) - goto err4; - } - omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); - } else { - for (irq_idx = 0; irq_idx < omap_kp->rows; irq_idx++) { - if (request_irq(gpio_to_irq(row_gpios[irq_idx]), - omap_kp_interrupt, - IRQF_TRIGGER_FALLING, - "omap-keypad", omap_kp) < 0) - goto err5; - } + omap_kp->irq = platform_get_irq(pdev, 0); + if (omap_kp->irq >= 0) { + if (request_irq(omap_kp->irq, omap_kp_interrupt, 0, + "omap-keypad", omap_kp) < 0) + goto err4; } + omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + return 0; -err5: - for (i = irq_idx - 1; i >=0; i--) - free_irq(row_gpios[i], omap_kp); + err4: input_unregister_device(omap_kp->input); input_dev = NULL; @@ -423,7 +348,6 @@ err3: err2: for (i = row_idx - 1; i >=0; i--) gpio_free(row_gpios[i]); -err1: for (i = col_idx - 1; i >=0; i--) gpio_free(col_gpios[i]); @@ -439,18 +363,8 @@ static int __devexit omap_kp_remove(struct platform_device *pdev) /* disable keypad interrupt handling */ tasklet_disable(&kp_tasklet); - if (cpu_is_omap24xx()) { - int i; - for (i = 0; i < omap_kp->cols; i++) - gpio_free(col_gpios[i]); - for (i = 0; i < omap_kp->rows; i++) { - gpio_free(row_gpios[i]); - free_irq(gpio_to_irq(row_gpios[i]), omap_kp); - } - } else { - omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); - free_irq(omap_kp->irq, omap_kp); - } + omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); + free_irq(omap_kp->irq, omap_kp); del_timer_sync(&omap_kp->timer); tasklet_kill(&kp_tasklet); diff --git a/drivers/input/mouse/rpcmouse.c b/drivers/input/mouse/rpcmouse.c index 272deddc8db..21c60fea5d3 100644 --- a/drivers/input/mouse/rpcmouse.c +++ b/drivers/input/mouse/rpcmouse.c @@ -42,7 +42,7 @@ static irqreturn_t rpcmouse_irq(int irq, void *dev_id) x = (short) iomd_readl(IOMD_MOUSEX); y = (short) iomd_readl(IOMD_MOUSEY); - b = (short) (__raw_readl(0xe0310000) ^ 0x70); + b = (short) (__raw_readl(IOMEM(0xe0310000)) ^ 0x70); dx = x - rpcmouse_lastx; dy = y - rpcmouse_lasty; diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c index f5fbdf94de3..45887e31242 100644 --- a/drivers/input/serio/ams_delta_serio.c +++ b/drivers/input/serio/ams_delta_serio.c @@ -27,7 +27,7 @@ #include <linux/module.h> #include <asm/mach-types.h> -#include <plat/board-ams-delta.h> +#include <mach/board-ams-delta.h> #include <mach/ams-delta-fiq.h> diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c index 88cf9d95263..409da0f8e5c 100644 --- a/drivers/media/video/omap/omap_vout.c +++ b/drivers/media/video/omap/omap_vout.c @@ -44,6 +44,7 @@ #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> +#include <plat/cpu.h> #include <plat/dma.h> #include <plat/vrfb.h> #include <video/omapdss.h> diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c index 1c347633e66..43e61fe5df5 100644 --- a/drivers/media/video/omap3isp/isp.c +++ b/drivers/media/video/omap3isp/isp.c @@ -70,6 +70,8 @@ #include <media/v4l2-common.h> #include <media/v4l2-device.h> +#include <plat/cpu.h> + #include "isp.h" #include "ispreg.h" #include "ispccdc.h" diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index 1c32afed28a..9d3a0bc1a65 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -1132,12 +1132,7 @@ static void clocks_init(struct device *dev, u32 rate; u8 ctrl = HFCLK_FREQ_26_MHZ; -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - if (cpu_is_omap2430()) - osc = clk_get(dev, "osc_ck"); - else - osc = clk_get(dev, "osc_sys_ck"); - + osc = clk_get(dev, "fck"); if (IS_ERR(osc)) { printk(KERN_WARNING "Skipping twl internal clock init and " "using bootloader value (unknown osc rate)\n"); @@ -1147,18 +1142,6 @@ static void clocks_init(struct device *dev, rate = clk_get_rate(osc); clk_put(osc); -#else - /* REVISIT for non-OMAP systems, pass the clock rate from - * board init code, using platform_data. - */ - osc = ERR_PTR(-EIO); - - printk(KERN_WARNING "Skipping twl internal clock init and " - "using bootloader value (unknown osc rate)\n"); - - return; -#endif - switch (rate) { case 19200000: ctrl = HFCLK_FREQ_19p2_MHZ; @@ -1220,10 +1203,23 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct twl4030_platform_data *pdata = client->dev.platform_data; struct device_node *node = client->dev.of_node; + struct platform_device *pdev; int irq_base = 0; int status; unsigned i, num_slaves; + pdev = platform_device_alloc(DRIVER_NAME, -1); + if (!pdev) { + dev_err(&client->dev, "can't alloc pdev\n"); + return -ENOMEM; + } + + status = platform_device_add(pdev); + if (status) { + platform_device_put(pdev); + return status; + } + if (node && !pdata) { /* * XXX: Temporary pdata until the information is correctly @@ -1232,23 +1228,30 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) pdata = devm_kzalloc(&client->dev, sizeof(struct twl4030_platform_data), GFP_KERNEL); - if (!pdata) - return -ENOMEM; + if (!pdata) { + status = -ENOMEM; + goto free; + } } if (!pdata) { dev_dbg(&client->dev, "no platform data?\n"); - return -EINVAL; + status = -EINVAL; + goto free; } + platform_set_drvdata(pdev, pdata); + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) { dev_dbg(&client->dev, "can't talk I2C?\n"); - return -EIO; + status = -EIO; + goto free; } if (inuse) { dev_dbg(&client->dev, "driver is already in use\n"); - return -EBUSY; + status = -EBUSY; + goto free; } if ((id->driver_data) & TWL6030_CLASS) { @@ -1283,7 +1286,7 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) inuse = true; /* setup clock framework */ - clocks_init(&client->dev, pdata->clock); + clocks_init(&pdev->dev, pdata->clock); /* read TWL IDCODE Register */ if (twl_id == TWL4030_CLASS_ID) { @@ -1333,6 +1336,9 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) fail: if (status < 0) twl_remove(client); +free: + if (status < 0) + platform_device_unregister(pdev); return status; } diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index a5999a74496..c6259a82954 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -33,11 +33,9 @@ #include <asm/io.h> #include <asm/irq.h> -#include <plat/board.h> #include <plat/mmc.h> #include <asm/gpio.h> #include <plat/dma.h> -#include <plat/mux.h> #include <plat/fpga.h> #define OMAP_MMC_REG_CMD 0x00 diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 8e2d81f1ee4..38adc330c00 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -40,7 +40,6 @@ #include <linux/regulator/consumer.h> #include <linux/pm_runtime.h> #include <mach/hardware.h> -#include <plat/board.h> #include <plat/mmc.h> #include <plat/cpu.h> diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index 0810ccc23d7..5393c64de3c 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -27,7 +27,6 @@ #include <asm/gpio.h> -#include <mach/gpio-tegra.h> #include <mach/sdhci.h> #include "sdhci-pltfm.h" diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index 861ca8f7e47..a7040af0853 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -23,11 +23,15 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/gpio.h> +#include <linux/platform_data/gpio-omap.h> + #include <asm/io.h> -#include <mach/hardware.h> #include <asm/sizes.h> -#include <linux/gpio.h> -#include <plat/board-ams-delta.h> + +#include <mach/board-ams-delta.h> + +#include <mach/hardware.h> /* * MTD structure for E3 (Delta) diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c index c855e7cd337..d0d1bd4d0e7 100644 --- a/drivers/mtd/nand/bcm_umi_nand.c +++ b/drivers/mtd/nand/bcm_umi_nand.c @@ -249,20 +249,20 @@ static int nand_dev_ready(struct mtd_info *mtd) int bcm_umi_nand_inithw(void) { /* Configure nand timing parameters */ - REG_UMI_NAND_TCR &= ~0x7ffff; - REG_UMI_NAND_TCR |= HW_CFG_NAND_TCR; + writel(readl(®_UMI_NAND_TCR) & ~0x7ffff, ®_UMI_NAND_TCR); + writel(readl(®_UMI_NAND_TCR) | HW_CFG_NAND_TCR, ®_UMI_NAND_TCR); #if !defined(CONFIG_MTD_NAND_BCM_UMI_HWCS) /* enable software control of CS */ - REG_UMI_NAND_TCR |= REG_UMI_NAND_TCR_CS_SWCTRL; + writel(readl(®_UMI_NAND_TCR) | REG_UMI_NAND_TCR_CS_SWCTRL, ®_UMI_NAND_TCR); #endif /* keep NAND chip select asserted */ - REG_UMI_NAND_RCSR |= REG_UMI_NAND_RCSR_CS_ASSERTED; + writel(readl(®_UMI_NAND_RCSR) | REG_UMI_NAND_RCSR_CS_ASSERTED, ®_UMI_NAND_RCSR); - REG_UMI_NAND_TCR &= ~REG_UMI_NAND_TCR_WORD16; + writel(readl(®_UMI_NAND_TCR) & ~REG_UMI_NAND_TCR_WORD16, ®_UMI_NAND_TCR); /* enable writes to flash */ - REG_UMI_MMD_ICR |= REG_UMI_MMD_ICR_FLASH_WP; + writel(readl(®_UMI_MMD_ICR) | REG_UMI_MMD_ICR_FLASH_WP, ®_UMI_MMD_ICR); writel(NAND_CMD_RESET, bcm_umi_io_base + REG_NAND_CMD_OFFSET); nand_bcm_umi_wait_till_ready(); diff --git a/drivers/mtd/nand/nand_bcm_umi.h b/drivers/mtd/nand/nand_bcm_umi.h index 198b304d6f7..d90186684db 100644 --- a/drivers/mtd/nand/nand_bcm_umi.h +++ b/drivers/mtd/nand/nand_bcm_umi.h @@ -17,7 +17,7 @@ /* ---- Include Files ---------------------------------------------------- */ #include <mach/reg_umi.h> #include <mach/reg_nand.h> -#include <cfg_global.h> +#include <mach/cfg_global.h> /* ---- Constants and Types ---------------------------------------------- */ #if (CFG_GLOBAL_CHIP_FAMILY == CFG_GLOBAL_CHIP_FAMILY_BCMRING) @@ -48,7 +48,7 @@ int nand_bcm_umi_bch_correct_page(uint8_t *datap, uint8_t *readEccData, /* Check in device is ready */ static inline int nand_bcm_umi_dev_ready(void) { - return REG_UMI_NAND_RCSR & REG_UMI_NAND_RCSR_RDY; + return readl(®_UMI_NAND_RCSR) & REG_UMI_NAND_RCSR_RDY; } /* Wait until device is ready */ @@ -62,10 +62,11 @@ static inline void nand_bcm_umi_wait_till_ready(void) static inline void nand_bcm_umi_hamming_enable_hwecc(void) { /* disable and reset ECC, 512 byte page */ - REG_UMI_NAND_ECC_CSR &= ~(REG_UMI_NAND_ECC_CSR_ECC_ENABLE | - REG_UMI_NAND_ECC_CSR_256BYTE); + writel(readl(®_UMI_NAND_ECC_CSR) & ~(REG_UMI_NAND_ECC_CSR_ECC_ENABLE | + REG_UMI_NAND_ECC_CSR_256BYTE), ®_UMI_NAND_ECC_CSR); /* enable ECC */ - REG_UMI_NAND_ECC_CSR |= REG_UMI_NAND_ECC_CSR_ECC_ENABLE; + writel(readl(®_UMI_NAND_ECC_CSR) | REG_UMI_NAND_ECC_CSR_ECC_ENABLE, + ®_UMI_NAND_ECC_CSR); } #if NAND_ECC_BCH @@ -76,18 +77,18 @@ static inline void nand_bcm_umi_hamming_enable_hwecc(void) static inline void nand_bcm_umi_bch_enable_read_hwecc(void) { /* disable and reset ECC */ - REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID; + writel(REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID, ®_UMI_BCH_CTRL_STATUS); /* Turn on ECC */ - REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN; + writel(REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN, ®_UMI_BCH_CTRL_STATUS); } /* Enable BCH Write ECC */ static inline void nand_bcm_umi_bch_enable_write_hwecc(void) { /* disable and reset ECC */ - REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID; + writel(REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID, ®_UMI_BCH_CTRL_STATUS); /* Turn on ECC */ - REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN; + writel(REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN, ®_UMI_BCH_CTRL_STATUS); } /* Config number of BCH ECC bytes */ @@ -99,9 +100,9 @@ static inline void nand_bcm_umi_bch_config_ecc(uint8_t numEccBytes) uint32_t numBits = numEccBytes * 8; /* disable and reset ECC */ - REG_UMI_BCH_CTRL_STATUS = - REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID | - REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID; + writel(REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID | + REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID, + ®_UMI_BCH_CTRL_STATUS); /* Every correctible bit requires 13 ECC bits */ tValue = (uint32_t) (numBits / ECC_BITS_PER_CORRECTABLE_BIT); @@ -113,23 +114,21 @@ static inline void nand_bcm_umi_bch_config_ecc(uint8_t numEccBytes) kValue = nValue - (tValue * ECC_BITS_PER_CORRECTABLE_BIT); /* Write the settings */ - REG_UMI_BCH_N = nValue; - REG_UMI_BCH_T = tValue; - REG_UMI_BCH_K = kValue; + writel(nValue, ®_UMI_BCH_N); + writel(tValue, ®_UMI_BCH_T); + writel(kValue, ®_UMI_BCH_K); } /* Pause during ECC read calculation to skip bytes in OOB */ static inline void nand_bcm_umi_bch_pause_read_ecc_calc(void) { - REG_UMI_BCH_CTRL_STATUS = - REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN | - REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC; + writel(REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN | REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC, ®_UMI_BCH_CTRL_STATUS); } /* Resume during ECC read calculation after skipping bytes in OOB */ static inline void nand_bcm_umi_bch_resume_read_ecc_calc(void) { - REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN; + writel(REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN, ®_UMI_BCH_CTRL_STATUS); } /* Poll read ECC calc to check when hardware completes */ @@ -139,7 +138,7 @@ static inline uint32_t nand_bcm_umi_bch_poll_read_ecc_calc(void) do { /* wait for ECC to be valid */ - regVal = REG_UMI_BCH_CTRL_STATUS; + regVal = readl(®_UMI_BCH_CTRL_STATUS); } while ((regVal & REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID) == 0); return regVal; @@ -149,7 +148,7 @@ static inline uint32_t nand_bcm_umi_bch_poll_read_ecc_calc(void) static inline void nand_bcm_umi_bch_poll_write_ecc_calc(void) { /* wait for ECC to be valid */ - while ((REG_UMI_BCH_CTRL_STATUS & REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID) + while ((readl(®_UMI_BCH_CTRL_STATUS) & REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID) == 0) ; } @@ -170,9 +169,9 @@ static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize, if (pageSize != NAND_DATA_ACCESS_SIZE) { /* skip BI */ #if defined(__KERNEL__) && !defined(STANDALONE) - *oobp++ = REG_NAND_DATA8; + *oobp++ = readb(®_NAND_DATA8); #else - REG_NAND_DATA8; + readb(®_NAND_DATA8); #endif numToRead--; } @@ -180,9 +179,9 @@ static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize, while (numToRead > numEccBytes) { /* skip free oob region */ #if defined(__KERNEL__) && !defined(STANDALONE) - *oobp++ = REG_NAND_DATA8; + *oobp++ = readb(®_NAND_DATA8); #else - REG_NAND_DATA8; + readb(®_NAND_DATA8); #endif numToRead--; } @@ -193,11 +192,11 @@ static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize, while (numToRead > 11) { #if defined(__KERNEL__) && !defined(STANDALONE) - *oobp = REG_NAND_DATA8; + *oobp = readb(®_NAND_DATA8); eccCalc[eccPos++] = *oobp; oobp++; #else - eccCalc[eccPos++] = REG_NAND_DATA8; + eccCalc[eccPos++] = readb(®_NAND_DATA8); #endif numToRead--; } @@ -207,9 +206,9 @@ static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize, if (numToRead == 11) { /* read BI */ #if defined(__KERNEL__) && !defined(STANDALONE) - *oobp++ = REG_NAND_DATA8; + *oobp++ = readb(®_NAND_DATA8); #else - REG_NAND_DATA8; + readb(®_NAND_DATA8); #endif numToRead--; } @@ -219,11 +218,11 @@ static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize, nand_bcm_umi_bch_resume_read_ecc_calc(); while (numToRead) { #if defined(__KERNEL__) && !defined(STANDALONE) - *oobp = REG_NAND_DATA8; + *oobp = readb(®_NAND_DATA8); eccCalc[eccPos++] = *oobp; oobp++; #else - eccCalc[eccPos++] = REG_NAND_DATA8; + eccCalc[eccPos++] = readb(®_NAND_DATA8); #endif numToRead--; } @@ -255,7 +254,7 @@ static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize, if (pageSize == NAND_DATA_ACCESS_SIZE) { /* Now fill in the ECC bytes */ if (numEccBytes >= 13) - eccVal = REG_UMI_BCH_WR_ECC_3; + eccVal = readl(®_UMI_BCH_WR_ECC_3); /* Usually we skip CM in oob[0,1] */ NAND_BCM_UMI_ECC_WRITE(numEccBytes, 15, &oobp[0], @@ -268,7 +267,7 @@ static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize, eccVal & 0xff); /* ECC 12 */ if (numEccBytes >= 9) - eccVal = REG_UMI_BCH_WR_ECC_2; + eccVal = readl(®_UMI_BCH_WR_ECC_2); NAND_BCM_UMI_ECC_WRITE(numEccBytes, 12, &oobp[3], (eccVal >> 24) & 0xff); /* ECC11 */ @@ -281,7 +280,7 @@ static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize, /* Now fill in the ECC bytes */ if (numEccBytes >= 13) - eccVal = REG_UMI_BCH_WR_ECC_3; + eccVal = readl(®_UMI_BCH_WR_ECC_3); /* Usually skip CM in oob[1,2] */ NAND_BCM_UMI_ECC_WRITE(numEccBytes, 15, &oobp[1], @@ -294,7 +293,7 @@ static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize, eccVal & 0xff); /* ECC12 */ if (numEccBytes >= 9) - eccVal = REG_UMI_BCH_WR_ECC_2; + eccVal = readl(®_UMI_BCH_WR_ECC_2); NAND_BCM_UMI_ECC_WRITE(numEccBytes, 12, &oobp[4], (eccVal >> 24) & 0xff); /* ECC11 */ @@ -309,7 +308,7 @@ static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize, eccVal & 0xff); /* ECC8 */ if (numEccBytes >= 5) - eccVal = REG_UMI_BCH_WR_ECC_1; + eccVal = readl(®_UMI_BCH_WR_ECC_1); NAND_BCM_UMI_ECC_WRITE(numEccBytes, 8, &oobp[8], (eccVal >> 24) & 0xff); /* ECC7 */ @@ -321,7 +320,7 @@ static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize, eccVal & 0xff); /* ECC4 */ if (numEccBytes >= 1) - eccVal = REG_UMI_BCH_WR_ECC_0; + eccVal = readl(®_UMI_BCH_WR_ECC_0); NAND_BCM_UMI_ECC_WRITE(numEccBytes, 4, &oobp[12], (eccVal >> 24) & 0xff); /* ECC3 */ diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index ac4fd756eda..fc8111278d1 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -29,7 +29,7 @@ #include <plat/dma.h> #include <plat/gpmc.h> -#include <plat/nand.h> +#include <linux/platform_data/mtd-nand-omap2.h> #define DRIVER_NAME "omap2-nand" #define OMAP_NAND_TIMEOUT_MS 5000 @@ -101,6 +101,16 @@ #define P4e_s(a) (TF(a & NAND_Ecc_P4e) << 0) #define P4o_s(a) (TF(a & NAND_Ecc_P4o) << 1) +#define PREFETCH_CONFIG1_CS_SHIFT 24 +#define ECC_CONFIG_CS_SHIFT 1 +#define CS_MASK 0x7 +#define ENABLE_PREFETCH (0x1 << 7) +#define DMA_MPU_MODE_SHIFT 2 +#define ECCSIZE1_SHIFT 22 +#define ECC1RESULTSIZE 0x1 +#define ECCCLEAR 0x100 +#define ECC1 0x1 + /* oob info generated runtime depending on ecc algorithm and layout selected */ static struct nand_ecclayout omap_oobinfo; /* Define some generic bad / good block scan pattern which are used @@ -124,15 +134,18 @@ struct omap_nand_info { int gpmc_cs; unsigned long phys_base; + unsigned long mem_size; struct completion comp; struct dma_chan *dma; - int gpmc_irq; + int gpmc_irq_fifo; + int gpmc_irq_count; enum { OMAP_NAND_IO_READ = 0, /* read */ OMAP_NAND_IO_WRITE, /* write */ } iomode; u_char *buf; int buf_len; + struct gpmc_nand_regs reg; #ifdef CONFIG_MTD_NAND_OMAP_BCH struct bch_control *bch; @@ -141,6 +154,63 @@ struct omap_nand_info { }; /** + * omap_prefetch_enable - configures and starts prefetch transfer + * @cs: cs (chip select) number + * @fifo_th: fifo threshold to be used for read/ write + * @dma_mode: dma mode enable (1) or disable (0) + * @u32_count: number of bytes to be transferred + * @is_write: prefetch read(0) or write post(1) mode + */ +static int omap_prefetch_enable(int cs, int fifo_th, int dma_mode, + unsigned int u32_count, int is_write, struct omap_nand_info *info) +{ + u32 val; + + if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) + return -1; + + if (readl(info->reg.gpmc_prefetch_control)) + return -EBUSY; + + /* Set the amount of bytes to be prefetched */ + writel(u32_count, info->reg.gpmc_prefetch_config2); + + /* Set dma/mpu mode, the prefetch read / post write and + * enable the engine. Set which cs is has requested for. + */ + val = ((cs << PREFETCH_CONFIG1_CS_SHIFT) | + PREFETCH_FIFOTHRESHOLD(fifo_th) | ENABLE_PREFETCH | + (dma_mode << DMA_MPU_MODE_SHIFT) | (0x1 & is_write)); + writel(val, info->reg.gpmc_prefetch_config1); + + /* Start the prefetch engine */ + writel(0x1, info->reg.gpmc_prefetch_control); + + return 0; +} + +/** + * omap_prefetch_reset - disables and stops the prefetch engine + */ +static int omap_prefetch_reset(int cs, struct omap_nand_info *info) +{ + u32 config1; + + /* check if the same module/cs is trying to reset */ + config1 = readl(info->reg.gpmc_prefetch_config1); + if (((config1 >> PREFETCH_CONFIG1_CS_SHIFT) & CS_MASK) != cs) + return -EINVAL; + + /* Stop the PFPW engine */ + writel(0x0, info->reg.gpmc_prefetch_control); + + /* Reset/disable the PFPW engine */ + writel(0x0, info->reg.gpmc_prefetch_config1); + + return 0; +} + +/** * omap_hwcontrol - hardware specific access to control-lines * @mtd: MTD device structure * @cmd: command to device @@ -158,13 +228,13 @@ static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) if (cmd != NAND_CMD_NONE) { if (ctrl & NAND_CLE) - gpmc_nand_write(info->gpmc_cs, GPMC_NAND_COMMAND, cmd); + writeb(cmd, info->reg.gpmc_nand_command); else if (ctrl & NAND_ALE) - gpmc_nand_write(info->gpmc_cs, GPMC_NAND_ADDRESS, cmd); + writeb(cmd, info->reg.gpmc_nand_address); else /* NAND_NCE */ - gpmc_nand_write(info->gpmc_cs, GPMC_NAND_DATA, cmd); + writeb(cmd, info->reg.gpmc_nand_data); } } @@ -198,7 +268,8 @@ static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len) iowrite8(*p++, info->nand.IO_ADDR_W); /* wait until buffer is available for write */ do { - status = gpmc_read_status(GPMC_STATUS_BUFFER); + status = readl(info->reg.gpmc_status) & + GPMC_STATUS_BUFF_EMPTY; } while (!status); } } @@ -235,7 +306,8 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len) iowrite16(*p++, info->nand.IO_ADDR_W); /* wait until buffer is available for write */ do { - status = gpmc_read_status(GPMC_STATUS_BUFFER); + status = readl(info->reg.gpmc_status) & + GPMC_STATUS_BUFF_EMPTY; } while (!status); } } @@ -265,8 +337,8 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len) } /* configure and start prefetch transfer */ - ret = gpmc_prefetch_enable(info->gpmc_cs, - PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x0); + ret = omap_prefetch_enable(info->gpmc_cs, + PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x0, info); if (ret) { /* PFPW engine is busy, use cpu copy method */ if (info->nand.options & NAND_BUSWIDTH_16) @@ -275,14 +347,15 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len) omap_read_buf8(mtd, (u_char *)p, len); } else { do { - r_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT); + r_count = readl(info->reg.gpmc_prefetch_status); + r_count = GPMC_PREFETCH_STATUS_FIFO_CNT(r_count); r_count = r_count >> 2; ioread32_rep(info->nand.IO_ADDR_R, p, r_count); p += r_count; len -= r_count << 2; } while (len); /* disable and stop the PFPW engine */ - gpmc_prefetch_reset(info->gpmc_cs); + omap_prefetch_reset(info->gpmc_cs, info); } } @@ -301,6 +374,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd, int i = 0, ret = 0; u16 *p = (u16 *)buf; unsigned long tim, limit; + u32 val; /* take care of subpage writes */ if (len % 2 != 0) { @@ -310,8 +384,8 @@ static void omap_write_buf_pref(struct mtd_info *mtd, } /* configure and start prefetch transfer */ - ret = gpmc_prefetch_enable(info->gpmc_cs, - PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x1); + ret = omap_prefetch_enable(info->gpmc_cs, + PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x1, info); if (ret) { /* PFPW engine is busy, use cpu copy method */ if (info->nand.options & NAND_BUSWIDTH_16) @@ -320,7 +394,8 @@ static void omap_write_buf_pref(struct mtd_info *mtd, omap_write_buf8(mtd, (u_char *)p, len); } else { while (len) { - w_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT); + w_count = readl(info->reg.gpmc_prefetch_status); + w_count = GPMC_PREFETCH_STATUS_FIFO_CNT(w_count); w_count = w_count >> 1; for (i = 0; (i < w_count) && len; i++, len -= 2) iowrite16(*p++, info->nand.IO_ADDR_W); @@ -329,11 +404,14 @@ static void omap_write_buf_pref(struct mtd_info *mtd, tim = 0; limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS)); - while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit)) + do { cpu_relax(); + val = readl(info->reg.gpmc_prefetch_status); + val = GPMC_PREFETCH_STATUS_COUNT(val); + } while (val && (tim++ < limit)); /* disable and stop the PFPW engine */ - gpmc_prefetch_reset(info->gpmc_cs); + omap_prefetch_reset(info->gpmc_cs, info); } } @@ -365,6 +443,7 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr, unsigned long tim, limit; unsigned n; int ret; + u32 val; if (addr >= high_memory) { struct page *p1; @@ -396,9 +475,9 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr, tx->callback_param = &info->comp; dmaengine_submit(tx); - /* configure and start prefetch transfer */ - ret = gpmc_prefetch_enable(info->gpmc_cs, - PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write); + /* configure and start prefetch transfer */ + ret = omap_prefetch_enable(info->gpmc_cs, + PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write, info); if (ret) /* PFPW engine is busy, use cpu copy method */ goto out_copy_unmap; @@ -410,11 +489,15 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr, wait_for_completion(&info->comp); tim = 0; limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS)); - while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit)) + + do { cpu_relax(); + val = readl(info->reg.gpmc_prefetch_status); + val = GPMC_PREFETCH_STATUS_COUNT(val); + } while (val && (tim++ < limit)); /* disable and stop the PFPW engine */ - gpmc_prefetch_reset(info->gpmc_cs); + omap_prefetch_reset(info->gpmc_cs, info); dma_unmap_sg(info->dma->device->dev, &sg, 1, dir); return 0; @@ -471,13 +554,12 @@ static irqreturn_t omap_nand_irq(int this_irq, void *dev) { struct omap_nand_info *info = (struct omap_nand_info *) dev; u32 bytes; - u32 irq_stat; - irq_stat = gpmc_read_status(GPMC_GET_IRQ_STATUS); - bytes = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT); + bytes = readl(info->reg.gpmc_prefetch_status); + bytes = GPMC_PREFETCH_STATUS_FIFO_CNT(bytes); bytes = bytes & 0xFFFC; /* io in multiple of 4 bytes */ if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */ - if (irq_stat & 0x2) + if (this_irq == info->gpmc_irq_count) goto done; if (info->buf_len && (info->buf_len < bytes)) @@ -494,20 +576,17 @@ static irqreturn_t omap_nand_irq(int this_irq, void *dev) (u32 *)info->buf, bytes >> 2); info->buf = info->buf + bytes; - if (irq_stat & 0x2) + if (this_irq == info->gpmc_irq_count) goto done; } - gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, irq_stat); return IRQ_HANDLED; done: complete(&info->comp); - /* disable irq */ - gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ, 0); - /* clear status */ - gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, irq_stat); + disable_irq_nosync(info->gpmc_irq_fifo); + disable_irq_nosync(info->gpmc_irq_count); return IRQ_HANDLED; } @@ -534,22 +613,22 @@ static void omap_read_buf_irq_pref(struct mtd_info *mtd, u_char *buf, int len) init_completion(&info->comp); /* configure and start prefetch transfer */ - ret = gpmc_prefetch_enable(info->gpmc_cs, - PREFETCH_FIFOTHRESHOLD_MAX/2, 0x0, len, 0x0); + ret = omap_prefetch_enable(info->gpmc_cs, + PREFETCH_FIFOTHRESHOLD_MAX/2, 0x0, len, 0x0, info); if (ret) /* PFPW engine is busy, use cpu copy method */ goto out_copy; info->buf_len = len; - /* enable irq */ - gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ, - (GPMC_IRQ_FIFOEVENTENABLE | GPMC_IRQ_COUNT_EVENT)); + + enable_irq(info->gpmc_irq_count); + enable_irq(info->gpmc_irq_fifo); /* waiting for read to complete */ wait_for_completion(&info->comp); /* disable and stop the PFPW engine */ - gpmc_prefetch_reset(info->gpmc_cs); + omap_prefetch_reset(info->gpmc_cs, info); return; out_copy: @@ -572,6 +651,7 @@ static void omap_write_buf_irq_pref(struct mtd_info *mtd, struct omap_nand_info, mtd); int ret = 0; unsigned long tim, limit; + u32 val; if (len <= mtd->oobsize) { omap_write_buf_pref(mtd, buf, len); @@ -583,27 +663,31 @@ static void omap_write_buf_irq_pref(struct mtd_info *mtd, init_completion(&info->comp); /* configure and start prefetch transfer : size=24 */ - ret = gpmc_prefetch_enable(info->gpmc_cs, - (PREFETCH_FIFOTHRESHOLD_MAX * 3) / 8, 0x0, len, 0x1); + ret = omap_prefetch_enable(info->gpmc_cs, + (PREFETCH_FIFOTHRESHOLD_MAX * 3) / 8, 0x0, len, 0x1, info); if (ret) /* PFPW engine is busy, use cpu copy method */ goto out_copy; info->buf_len = len; - /* enable irq */ - gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ, - (GPMC_IRQ_FIFOEVENTENABLE | GPMC_IRQ_COUNT_EVENT)); + + enable_irq(info->gpmc_irq_count); + enable_irq(info->gpmc_irq_fifo); /* waiting for write to complete */ wait_for_completion(&info->comp); + /* wait for data to flushed-out before reset the prefetch */ tim = 0; limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS)); - while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit)) + do { + val = readl(info->reg.gpmc_prefetch_status); + val = GPMC_PREFETCH_STATUS_COUNT(val); cpu_relax(); + } while (val && (tim++ < limit)); /* disable and stop the PFPW engine */ - gpmc_prefetch_reset(info->gpmc_cs); + omap_prefetch_reset(info->gpmc_cs, info); return; out_copy: @@ -843,7 +927,20 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat, { struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); - return gpmc_calculate_ecc(info->gpmc_cs, dat, ecc_code); + u32 val; + + val = readl(info->reg.gpmc_ecc_config); + if (((val >> ECC_CONFIG_CS_SHIFT) & ~CS_MASK) != info->gpmc_cs) + return -EINVAL; + + /* read ecc result */ + val = readl(info->reg.gpmc_ecc1_result); + *ecc_code++ = val; /* P128e, ..., P1e */ + *ecc_code++ = val >> 16; /* P128o, ..., P1o */ + /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */ + *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0); + + return 0; } /** @@ -857,8 +954,34 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int mode) mtd); struct nand_chip *chip = mtd->priv; unsigned int dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0; + u32 val; + + /* clear ecc and enable bits */ + val = ECCCLEAR | ECC1; + writel(val, info->reg.gpmc_ecc_control); + + /* program ecc and result sizes */ + val = ((((info->nand.ecc.size >> 1) - 1) << ECCSIZE1_SHIFT) | + ECC1RESULTSIZE); + writel(val, info->reg.gpmc_ecc_size_config); - gpmc_enable_hwecc(info->gpmc_cs, mode, dev_width, info->nand.ecc.size); + switch (mode) { + case NAND_ECC_READ: + case NAND_ECC_WRITE: + writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control); + break; + case NAND_ECC_READSYN: + writel(ECCCLEAR, info->reg.gpmc_ecc_control); + break; + default: + dev_info(&info->pdev->dev, + "error: unrecognized Mode[%d]!\n", mode); + break; + } + + /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */ + val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1); + writel(val, info->reg.gpmc_ecc_config); } /** @@ -886,10 +1009,9 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip) else timeo += (HZ * 20) / 1000; - gpmc_nand_write(info->gpmc_cs, - GPMC_NAND_COMMAND, (NAND_CMD_STATUS & 0xFF)); + writeb(NAND_CMD_STATUS & 0xFF, info->reg.gpmc_nand_command); while (time_before(jiffies, timeo)) { - status = gpmc_nand_read(info->gpmc_cs, GPMC_NAND_DATA); + status = readb(info->reg.gpmc_nand_data); if (status & NAND_STATUS_READY) break; cond_resched(); @@ -909,22 +1031,13 @@ static int omap_dev_ready(struct mtd_info *mtd) struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); - val = gpmc_read_status(GPMC_GET_IRQ_STATUS); + val = readl(info->reg.gpmc_status); + if ((val & 0x100) == 0x100) { - /* Clear IRQ Interrupt */ - val |= 0x100; - val &= ~(0x0); - gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, val); + return 1; } else { - unsigned int cnt = 0; - while (cnt++ < 0x1FF) { - if ((val & 0x100) == 0x100) - return 0; - val = gpmc_read_status(GPMC_GET_IRQ_STATUS); - } + return 0; } - - return 1; } #ifdef CONFIG_MTD_NAND_OMAP_BCH @@ -1155,6 +1268,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) int i, offset; dma_cap_mask_t mask; unsigned sig; + struct resource *res; pdata = pdev->dev.platform_data; if (pdata == NULL) { @@ -1174,7 +1288,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) info->pdev = pdev; info->gpmc_cs = pdata->cs; - info->phys_base = pdata->phys_base; + info->reg = pdata->reg; info->mtd.priv = &info->nand; info->mtd.name = dev_name(&pdev->dev); @@ -1183,16 +1297,23 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) info->nand.options = pdata->devsize; info->nand.options |= NAND_SKIP_BBTSCAN; - /* NAND write protect off */ - gpmc_cs_configure(info->gpmc_cs, GPMC_CONFIG_WP, 0); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + err = -EINVAL; + dev_err(&pdev->dev, "error getting memory resource\n"); + goto out_free_info; + } + + info->phys_base = res->start; + info->mem_size = resource_size(res); - if (!request_mem_region(info->phys_base, NAND_IO_SIZE, + if (!request_mem_region(info->phys_base, info->mem_size, pdev->dev.driver->name)) { err = -EBUSY; goto out_free_info; } - info->nand.IO_ADDR_R = ioremap(info->phys_base, NAND_IO_SIZE); + info->nand.IO_ADDR_R = ioremap(info->phys_base, info->mem_size); if (!info->nand.IO_ADDR_R) { err = -ENOMEM; goto out_release_mem_region; @@ -1265,17 +1386,39 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) break; case NAND_OMAP_PREFETCH_IRQ: - err = request_irq(pdata->gpmc_irq, - omap_nand_irq, IRQF_SHARED, "gpmc-nand", info); + info->gpmc_irq_fifo = platform_get_irq(pdev, 0); + if (info->gpmc_irq_fifo <= 0) { + dev_err(&pdev->dev, "error getting fifo irq\n"); + err = -ENODEV; + goto out_release_mem_region; + } + err = request_irq(info->gpmc_irq_fifo, omap_nand_irq, + IRQF_SHARED, "gpmc-nand-fifo", info); if (err) { dev_err(&pdev->dev, "requesting irq(%d) error:%d", - pdata->gpmc_irq, err); + info->gpmc_irq_fifo, err); + info->gpmc_irq_fifo = 0; + goto out_release_mem_region; + } + + info->gpmc_irq_count = platform_get_irq(pdev, 1); + if (info->gpmc_irq_count <= 0) { + dev_err(&pdev->dev, "error getting count irq\n"); + err = -ENODEV; + goto out_release_mem_region; + } + err = request_irq(info->gpmc_irq_count, omap_nand_irq, + IRQF_SHARED, "gpmc-nand-count", info); + if (err) { + dev_err(&pdev->dev, "requesting irq(%d) error:%d", + info->gpmc_irq_count, err); + info->gpmc_irq_count = 0; goto out_release_mem_region; - } else { - info->gpmc_irq = pdata->gpmc_irq; - info->nand.read_buf = omap_read_buf_irq_pref; - info->nand.write_buf = omap_write_buf_irq_pref; } + + info->nand.read_buf = omap_read_buf_irq_pref; + info->nand.write_buf = omap_write_buf_irq_pref; + break; default: @@ -1363,7 +1506,11 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) out_release_mem_region: if (info->dma) dma_release_channel(info->dma); - release_mem_region(info->phys_base, NAND_IO_SIZE); + if (info->gpmc_irq_count > 0) + free_irq(info->gpmc_irq_count, info); + if (info->gpmc_irq_fifo > 0) + free_irq(info->gpmc_irq_fifo, info); + release_mem_region(info->phys_base, info->mem_size); out_free_info: kfree(info); @@ -1381,8 +1528,10 @@ static int omap_nand_remove(struct platform_device *pdev) if (info->dma) dma_release_channel(info->dma); - if (info->gpmc_irq) - free_irq(info->gpmc_irq, info); + if (info->gpmc_irq_count > 0) + free_irq(info->gpmc_irq_count, info); + if (info->gpmc_irq_fifo > 0) + free_irq(info->gpmc_irq_fifo, info); /* Release NAND device, its internal structures and partitions */ nand_release(&info->mtd); diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 398a8278384..1961be98517 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -39,22 +39,21 @@ #include <asm/mach/flash.h> #include <plat/gpmc.h> -#include <plat/onenand.h> +#include <linux/platform_data/mtd-onenand-omap2.h> #include <asm/gpio.h> #include <plat/dma.h> - -#include <plat/board.h> +#include <plat/cpu.h> #define DRIVER_NAME "omap2-onenand" -#define ONENAND_IO_SIZE SZ_128K #define ONENAND_BUFRAM_SIZE (1024 * 5) struct omap2_onenand { struct platform_device *pdev; int gpmc_cs; unsigned long phys_base; + unsigned int mem_size; int gpio_irq; struct mtd_info mtd; struct onenand_chip onenand; @@ -626,6 +625,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) struct omap2_onenand *c; struct onenand_chip *this; int r; + struct resource *res; pdata = pdev->dev.platform_data; if (pdata == NULL) { @@ -647,20 +647,24 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) c->gpio_irq = 0; } - r = gpmc_cs_request(c->gpmc_cs, ONENAND_IO_SIZE, &c->phys_base); - if (r < 0) { - dev_err(&pdev->dev, "Cannot request GPMC CS\n"); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + r = -EINVAL; + dev_err(&pdev->dev, "error getting memory resource\n"); goto err_kfree; } - if (request_mem_region(c->phys_base, ONENAND_IO_SIZE, + c->phys_base = res->start; + c->mem_size = resource_size(res); + + if (request_mem_region(c->phys_base, c->mem_size, pdev->dev.driver->name) == NULL) { - dev_err(&pdev->dev, "Cannot reserve memory region at 0x%08lx, " - "size: 0x%x\n", c->phys_base, ONENAND_IO_SIZE); + dev_err(&pdev->dev, "Cannot reserve memory region at 0x%08lx, size: 0x%x\n", + c->phys_base, c->mem_size); r = -EBUSY; - goto err_free_cs; + goto err_kfree; } - c->onenand.base = ioremap(c->phys_base, ONENAND_IO_SIZE); + c->onenand.base = ioremap(c->phys_base, c->mem_size); if (c->onenand.base == NULL) { r = -ENOMEM; goto err_release_mem_region; @@ -776,9 +780,7 @@ err_release_gpio: err_iounmap: iounmap(c->onenand.base); err_release_mem_region: - release_mem_region(c->phys_base, ONENAND_IO_SIZE); -err_free_cs: - gpmc_cs_free(c->gpmc_cs); + release_mem_region(c->phys_base, c->mem_size); err_kfree: kfree(c); @@ -800,7 +802,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev) gpio_free(c->gpio_irq); } iounmap(c->onenand.base); - release_mem_region(c->phys_base, ONENAND_IO_SIZE); + release_mem_region(c->phys_base, c->mem_size); gpmc_cs_free(c->gpmc_cs); kfree(c); diff --git a/drivers/net/ethernet/seeq/ether3.c b/drivers/net/ethernet/seeq/ether3.c index df808ac8cb6..6a40dd03a32 100644 --- a/drivers/net/ethernet/seeq/ether3.c +++ b/drivers/net/ethernet/seeq/ether3.c @@ -99,13 +99,13 @@ typedef enum { * The SEEQ8005 doesn't like us writing to its registers * too quickly. */ -static inline void ether3_outb(int v, const void __iomem *r) +static inline void ether3_outb(int v, void __iomem *r) { writeb(v, r); udelay(1); } -static inline void ether3_outw(int v, const void __iomem *r) +static inline void ether3_outw(int v, void __iomem *r) { writew(v, r); udelay(1); diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c index 0ad06a3bd56..fa74efe8220 100644 --- a/drivers/pcmcia/omap_cf.c +++ b/drivers/pcmcia/omap_cf.c @@ -24,7 +24,7 @@ #include <asm/io.h> #include <asm/sizes.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/tc.h> diff --git a/drivers/pinctrl/pinctrl-coh901.c b/drivers/pinctrl/pinctrl-coh901.c index cc0f00d73d1..b446c964121 100644 --- a/drivers/pinctrl/pinctrl-coh901.c +++ b/drivers/pinctrl/pinctrl-coh901.c @@ -1,11 +1,8 @@ /* * U300 GPIO module. * - * Copyright (C) 2007-2011 ST-Ericsson AB + * Copyright (C) 2007-2012 ST-Ericsson AB * License terms: GNU General Public License (GPL) version 2 - * This can driver either of the two basic GPIO cores - * available in the U300 platforms: - * COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0) * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0) * Author: Linus Walleij <linus.walleij@linaro.org> * Author: Jonas Aaberg <jonas.aberg@stericsson.com> @@ -24,19 +21,22 @@ #include <linux/slab.h> #include <linux/pinctrl/consumer.h> #include <linux/pinctrl/pinconf-generic.h> -#include <mach/gpio-u300.h> +#include <linux/platform_data/pinctrl-coh901.h> #include "pinctrl-coh901.h" +#define U300_GPIO_PORT_STRIDE (0x30) /* - * Register definitions for COH 901 335 variant + * Control Register 32bit (R/W) + * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores + * gives the number of GPIO pins. + * bit 8-2 (mask 0x000001FC) contains the core version ID. */ -#define U300_335_PORT_STRIDE (0x1C) -/* Port X Pin Data Register 32bit, this is both input and output (R/W) */ -#define U300_335_PXPDIR (0x00) -#define U300_335_PXPDOR (0x00) -/* Port X Pin Config Register 32bit (R/W) */ -#define U300_335_PXPCR (0x04) -/* This register layout is the same in both blocks */ +#define U300_GPIO_CR (0x00) +#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL) +#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL) +#define U300_GPIO_PXPDIR (0x04) +#define U300_GPIO_PXPDOR (0x08) +#define U300_GPIO_PXPCR (0x0C) #define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL) #define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL) #define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL) @@ -44,53 +44,17 @@ #define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL) #define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL) #define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL) -/* Port X Interrupt Event Register 32bit (R/W) */ -#define U300_335_PXIEV (0x08) -/* Port X Interrupt Enable Register 32bit (R/W) */ -#define U300_335_PXIEN (0x0C) -/* Port X Interrupt Force Register 32bit (R/W) */ -#define U300_335_PXIFR (0x10) -/* Port X Interrupt Config Register 32bit (R/W) */ -#define U300_335_PXICR (0x14) -/* This register layout is the same in both blocks */ +#define U300_GPIO_PXPER (0x10) +#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL) +#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL) +#define U300_GPIO_PXIEV (0x14) +#define U300_GPIO_PXIEN (0x18) +#define U300_GPIO_PXIFR (0x1C) +#define U300_GPIO_PXICR (0x20) #define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL) #define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL) #define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL) #define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL) -/* Port X Pull-up Enable Register 32bit (R/W) */ -#define U300_335_PXPER (0x18) -/* This register layout is the same in both blocks */ -#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL) -#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL) -/* Control Register 32bit (R/W) */ -#define U300_335_CR (0x54) -#define U300_335_CR_BLOCK_CLOCK_ENABLE (0x00000001UL) - -/* - * Register definitions for COH 901 571 / 3 variant - */ -#define U300_571_PORT_STRIDE (0x30) -/* - * Control Register 32bit (R/W) - * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores - * gives the number of GPIO pins. - * bit 8-2 (mask 0x000001FC) contains the core version ID. - */ -#define U300_571_CR (0x00) -#define U300_571_CR_SYNC_SEL_ENABLE (0x00000002UL) -#define U300_571_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL) -/* - * These registers have the same layout and function as the corresponding - * COH 901 335 registers, just at different offset. - */ -#define U300_571_PXPDIR (0x04) -#define U300_571_PXPDOR (0x08) -#define U300_571_PXPCR (0x0C) -#define U300_571_PXPER (0x10) -#define U300_571_PXIEV (0x14) -#define U300_571_PXIEN (0x18) -#define U300_571_PXIFR (0x1C) -#define U300_571_PXICR (0x20) /* 8 bits per port, no version has more than 7 ports */ #define U300_GPIO_PINS_PER_PORT 8 @@ -149,8 +113,6 @@ struct u300_gpio_confdata { /* BS335 has seven ports of 8 bits each = GPIO pins 0..55 */ #define BS335_GPIO_NUM_PORTS 7 -/* BS365 has five ports of 8 bits each = GPIO pins 0..39 */ -#define BS365_GPIO_NUM_PORTS 5 #define U300_FLOATING_INPUT { \ .bias_mode = PIN_CONFIG_BIAS_HIGH_IMPEDANCE, \ @@ -172,7 +134,6 @@ struct u300_gpio_confdata { .outval = 1, \ } - /* Initial configuration */ static const struct __initconst u300_gpio_confdata bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { @@ -255,66 +216,6 @@ bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { } }; -static const struct __initconst u300_gpio_confdata -bs365_gpio_config[BS365_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { - /* Port 0, pins 0-7 */ - { - U300_FLOATING_INPUT, - U300_OUTPUT_LOW, - U300_FLOATING_INPUT, - U300_OUTPUT_LOW, - U300_OUTPUT_LOW, - U300_OUTPUT_LOW, - U300_PULL_UP_INPUT, - U300_FLOATING_INPUT, - }, - /* Port 1, pins 0-7 */ - { - U300_OUTPUT_LOW, - U300_FLOATING_INPUT, - U300_OUTPUT_LOW, - U300_FLOATING_INPUT, - U300_FLOATING_INPUT, - U300_OUTPUT_HIGH, - U300_OUTPUT_LOW, - U300_OUTPUT_LOW, - }, - /* Port 2, pins 0-7 */ - { - U300_FLOATING_INPUT, - U300_PULL_UP_INPUT, - U300_OUTPUT_LOW, - U300_OUTPUT_LOW, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - }, - /* Port 3, pins 0-7 */ - { - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - }, - /* Port 4, pins 0-7 */ - { - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - U300_PULL_UP_INPUT, - /* These 4 pins doesn't exist on DB3210 */ - U300_OUTPUT_LOW, - U300_OUTPUT_LOW, - U300_OUTPUT_LOW, - U300_OUTPUT_LOW, - } -}; - /** * to_u300_gpio() - get the pointer to u300_gpio * @chip: the gpio chip member of the structure u300_gpio @@ -716,13 +617,7 @@ static void __init u300_gpio_init_coh901571(struct u300_gpio *gpio, const struct u300_gpio_confdata *conf; int offset = (i*8) + j; - if (plat->variant == U300_GPIO_COH901571_3_BS335) - conf = &bs335_gpio_config[i][j]; - else if (plat->variant == U300_GPIO_COH901571_3_BS365) - conf = &bs365_gpio_config[i][j]; - else - break; - + conf = &bs335_gpio_config[i][j]; u300_gpio_init_pin(gpio, offset, conf); } } @@ -796,50 +691,27 @@ static int __init u300_gpio_probe(struct platform_device *pdev) goto err_no_ioremap; } - if (plat->variant == U300_GPIO_COH901335) { - dev_info(gpio->dev, - "initializing GPIO Controller COH 901 335\n"); - gpio->stride = U300_335_PORT_STRIDE; - gpio->pcr = U300_335_PXPCR; - gpio->dor = U300_335_PXPDOR; - gpio->dir = U300_335_PXPDIR; - gpio->per = U300_335_PXPER; - gpio->icr = U300_335_PXICR; - gpio->ien = U300_335_PXIEN; - gpio->iev = U300_335_PXIEV; - ifr = U300_335_PXIFR; - - /* Turn on the GPIO block */ - writel(U300_335_CR_BLOCK_CLOCK_ENABLE, - gpio->base + U300_335_CR); - } else if (plat->variant == U300_GPIO_COH901571_3_BS335 || - plat->variant == U300_GPIO_COH901571_3_BS365) { - dev_info(gpio->dev, - "initializing GPIO Controller COH 901 571/3\n"); - gpio->stride = U300_571_PORT_STRIDE; - gpio->pcr = U300_571_PXPCR; - gpio->dor = U300_571_PXPDOR; - gpio->dir = U300_571_PXPDIR; - gpio->per = U300_571_PXPER; - gpio->icr = U300_571_PXICR; - gpio->ien = U300_571_PXIEN; - gpio->iev = U300_571_PXIEV; - ifr = U300_571_PXIFR; - - val = readl(gpio->base + U300_571_CR); - dev_info(gpio->dev, "COH901571/3 block version: %d, " \ - "number of cores: %d totalling %d pins\n", - ((val & 0x000001FC) >> 2), - ((val & 0x0000FE00) >> 9), - ((val & 0x0000FE00) >> 9) * 8); - writel(U300_571_CR_BLOCK_CLKRQ_ENABLE, - gpio->base + U300_571_CR); - u300_gpio_init_coh901571(gpio, plat); - } else { - dev_err(gpio->dev, "unknown block variant\n"); - err = -ENODEV; - goto err_unknown_variant; - } + dev_info(gpio->dev, + "initializing GPIO Controller COH 901 571/3\n"); + gpio->stride = U300_GPIO_PORT_STRIDE; + gpio->pcr = U300_GPIO_PXPCR; + gpio->dor = U300_GPIO_PXPDOR; + gpio->dir = U300_GPIO_PXPDIR; + gpio->per = U300_GPIO_PXPER; + gpio->icr = U300_GPIO_PXICR; + gpio->ien = U300_GPIO_PXIEN; + gpio->iev = U300_GPIO_PXIEV; + ifr = U300_GPIO_PXIFR; + + val = readl(gpio->base + U300_GPIO_CR); + dev_info(gpio->dev, "COH901571/3 block version: %d, " \ + "number of cores: %d totalling %d pins\n", + ((val & 0x000001FC) >> 2), + ((val & 0x0000FE00) >> 9), + ((val & 0x0000FE00) >> 9) * 8); + writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, + gpio->base + U300_GPIO_CR); + u300_gpio_init_coh901571(gpio, plat); /* Add each port with its IRQ separately */ INIT_LIST_HEAD(&gpio->port_list); @@ -906,7 +778,6 @@ err_no_pinctrl: err_no_chip: err_no_port: u300_gpio_free_ports(gpio); -err_unknown_variant: iounmap(gpio->base); err_no_ioremap: release_mem_region(gpio->memres->start, resource_size(gpio->memres)); @@ -923,16 +794,11 @@ err_no_clk: static int __exit u300_gpio_remove(struct platform_device *pdev) { - struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev); struct u300_gpio *gpio = platform_get_drvdata(pdev); int err; /* Turn off the GPIO block */ - if (plat->variant == U300_GPIO_COH901335) - writel(0x00000000U, gpio->base + U300_335_CR); - if (plat->variant == U300_GPIO_COH901571_3_BS335 || - plat->variant == U300_GPIO_COH901571_3_BS365) - writel(0x00000000U, gpio->base + U300_571_CR); + writel(0x00000000U, gpio->base + U300_GPIO_CR); err = gpiochip_remove(&gpio->chip); if (err < 0) { diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c index 44efc6e202a..d4957b4edb6 100644 --- a/drivers/power/avs/smartreflex.c +++ b/drivers/power/avs/smartreflex.c @@ -27,6 +27,8 @@ #include <linux/pm_runtime.h> #include <linux/power/smartreflex.h> +#include <plat/cpu.h> + #define SMARTREFLEX_NAME_LEN 16 #define NVALUE_NAME_LEN 40 #define SR_DISABLE_TIMEOUT 200 diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c index a1f7ac1f8cf..b54504ee61f 100644 --- a/drivers/remoteproc/omap_remoteproc.c +++ b/drivers/remoteproc/omap_remoteproc.c @@ -29,7 +29,7 @@ #include <linux/remoteproc.h> #include <plat/mailbox.h> -#include <plat/remoteproc.h> +#include <linux/platform_data/remoteproc-omap.h> #include "omap_remoteproc.h" #include "remoteproc_internal.h" diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c index edfd12b48c2..968d08358d2 100644 --- a/drivers/scsi/arm/eesox.c +++ b/drivers/scsi/arm/eesox.c @@ -273,7 +273,7 @@ static void eesoxscsi_buffer_out(void *buf, int length, void __iomem *base) { const void __iomem *reg_fas = base + EESOX_FAS216_OFFSET; const void __iomem *reg_dmastat = base + EESOX_DMASTAT; - const void __iomem *reg_dmadata = base + EESOX_DMADATA; + void __iomem *reg_dmadata = base + EESOX_DMADATA; do { unsigned int status; diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 5f84b5563c2..2d198a01a41 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -366,7 +366,7 @@ config SPI_STMP3XXX config SPI_TEGRA tristate "Nvidia Tegra SPI controller" - depends on ARCH_TEGRA && (TEGRA_SYSTEM_DMA || TEGRA20_APB_DMA) + depends on ARCH_TEGRA && TEGRA20_APB_DMA help SPI driver for NVidia Tegra SoCs diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c index 9b0d7169603..0a94d9dc9c3 100644 --- a/drivers/spi/spi-omap-uwire.c +++ b/drivers/spi/spi-omap-uwire.c @@ -52,8 +52,9 @@ #include <asm/io.h> #include <asm/mach-types.h> -#include <plat/mux.h> -#include <plat/omap7xx.h> /* OMAP7XX_IO_CONF registers */ +#include <mach/mux.h> + +#include <mach/omap7xx.h> /* OMAP7XX_IO_CONF registers */ /* FIXME address is now a platform device resource, diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 569714ebffe..5d59a69a906 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -42,7 +42,7 @@ #include <linux/spi/spi.h> #include <plat/clock.h> -#include <plat/mcspi.h> +#include <linux/platform_data/spi-omap2-mcspi.h> #define OMAP2_MCSPI_MAX_FREQ 48000000 #define SPI_AUTOSUSPEND_TIMEOUT 2000 diff --git a/drivers/spi/spi-tegra.c b/drivers/spi/spi-tegra.c index ef52c1c6f5c..488d9b6e9cb 100644 --- a/drivers/spi/spi-tegra.c +++ b/drivers/spi/spi-tegra.c @@ -164,23 +164,15 @@ struct spi_tegra_data { * for the generic case. */ int dma_req_len; -#if defined(CONFIG_TEGRA_SYSTEM_DMA) - struct tegra_dma_req rx_dma_req; - struct tegra_dma_channel *rx_dma; -#else struct dma_chan *rx_dma; struct dma_slave_config sconfig; struct dma_async_tx_descriptor *rx_dma_desc; dma_cookie_t rx_cookie; -#endif u32 *rx_bb; dma_addr_t rx_bb_phys; }; -#if !defined(CONFIG_TEGRA_SYSTEM_DMA) static void tegra_spi_rx_dma_complete(void *args); -#endif - static inline unsigned long spi_tegra_readl(struct spi_tegra_data *tspi, unsigned long reg) { @@ -204,10 +196,6 @@ static void spi_tegra_go(struct spi_tegra_data *tspi) val &= ~SLINK_DMA_BLOCK_SIZE(~0) & ~SLINK_DMA_EN; val |= SLINK_DMA_BLOCK_SIZE(tspi->dma_req_len / 4 - 1); spi_tegra_writel(tspi, val, SLINK_DMA_CTL); -#if defined(CONFIG_TEGRA_SYSTEM_DMA) - tspi->rx_dma_req.size = tspi->dma_req_len; - tegra_dma_enqueue_req(tspi->rx_dma, &tspi->rx_dma_req); -#else tspi->rx_dma_desc = dmaengine_prep_slave_single(tspi->rx_dma, tspi->rx_bb_phys, tspi->dma_req_len, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); @@ -219,7 +207,6 @@ static void spi_tegra_go(struct spi_tegra_data *tspi) tspi->rx_dma_desc->callback_param = tspi; tspi->rx_cookie = dmaengine_submit(tspi->rx_dma_desc); dma_async_issue_pending(tspi->rx_dma); -#endif val |= SLINK_DMA_EN; spi_tegra_writel(tspi, val, SLINK_DMA_CTL); @@ -405,19 +392,12 @@ static void handle_spi_rx_dma_complete(struct spi_tegra_data *tspi) spin_unlock_irqrestore(&tspi->lock, flags); } -#if defined(CONFIG_TEGRA_SYSTEM_DMA) -static void tegra_spi_rx_dma_complete(struct tegra_dma_req *req) -{ - struct spi_tegra_data *tspi = req->dev; - handle_spi_rx_dma_complete(tspi); -} -#else + static void tegra_spi_rx_dma_complete(void *args) { struct spi_tegra_data *tspi = args; handle_spi_rx_dma_complete(tspi); } -#endif static int spi_tegra_setup(struct spi_device *spi) { @@ -509,9 +489,7 @@ static int __devinit spi_tegra_probe(struct platform_device *pdev) struct spi_tegra_data *tspi; struct resource *r; int ret; -#if !defined(CONFIG_TEGRA_SYSTEM_DMA) dma_cap_mask_t mask; -#endif master = spi_alloc_master(&pdev->dev, sizeof *tspi); if (master == NULL) { @@ -563,14 +541,6 @@ static int __devinit spi_tegra_probe(struct platform_device *pdev) INIT_LIST_HEAD(&tspi->queue); -#if defined(CONFIG_TEGRA_SYSTEM_DMA) - tspi->rx_dma = tegra_dma_allocate_channel(TEGRA_DMA_MODE_ONESHOT); - if (!tspi->rx_dma) { - dev_err(&pdev->dev, "can not allocate rx dma channel\n"); - ret = -ENODEV; - goto err3; - } -#else dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); tspi->rx_dma = dma_request_channel(mask, NULL, NULL); @@ -580,8 +550,6 @@ static int __devinit spi_tegra_probe(struct platform_device *pdev) goto err3; } -#endif - tspi->rx_bb = dma_alloc_coherent(&pdev->dev, sizeof(u32) * BB_LEN, &tspi->rx_bb_phys, GFP_KERNEL); if (!tspi->rx_bb) { @@ -590,17 +558,6 @@ static int __devinit spi_tegra_probe(struct platform_device *pdev) goto err4; } -#if defined(CONFIG_TEGRA_SYSTEM_DMA) - tspi->rx_dma_req.complete = tegra_spi_rx_dma_complete; - tspi->rx_dma_req.to_memory = 1; - tspi->rx_dma_req.dest_addr = tspi->rx_bb_phys; - tspi->rx_dma_req.dest_bus_width = 32; - tspi->rx_dma_req.source_addr = tspi->phys + SLINK_RX_FIFO; - tspi->rx_dma_req.source_bus_width = 32; - tspi->rx_dma_req.source_wrap = 4; - tspi->rx_dma_req.req_sel = spi_tegra_req_sels[pdev->id]; - tspi->rx_dma_req.dev = tspi; -#else /* Dmaengine Dma slave config */ tspi->sconfig.src_addr = tspi->phys + SLINK_RX_FIFO; tspi->sconfig.dst_addr = tspi->phys + SLINK_RX_FIFO; @@ -616,7 +573,6 @@ static int __devinit spi_tegra_probe(struct platform_device *pdev) ret); goto err4; } -#endif master->dev.of_node = pdev->dev.of_node; ret = spi_register_master(master); @@ -630,11 +586,7 @@ err5: dma_free_coherent(&pdev->dev, sizeof(u32) * BB_LEN, tspi->rx_bb, tspi->rx_bb_phys); err4: -#if defined(CONFIG_TEGRA_SYSTEM_DMA) - tegra_dma_free_channel(tspi->rx_dma); -#else dma_release_channel(tspi->rx_dma); -#endif err3: clk_put(tspi->clk); err2: @@ -656,12 +608,7 @@ static int __devexit spi_tegra_remove(struct platform_device *pdev) tspi = spi_master_get_devdata(master); spi_unregister_master(master); -#if defined(CONFIG_TEGRA_SYSTEM_DMA) - tegra_dma_free_channel(tspi->rx_dma); -#else dma_release_channel(tspi->rx_dma); -#endif - dma_free_coherent(&pdev->dev, sizeof(u32) * BB_LEN, tspi->rx_bb, tspi->rx_bb_phys); diff --git a/drivers/staging/tidspbridge/core/dsp-clock.c b/drivers/staging/tidspbridge/core/dsp-clock.c index 7eac01e5fe0..b647207928b 100644 --- a/drivers/staging/tidspbridge/core/dsp-clock.c +++ b/drivers/staging/tidspbridge/core/dsp-clock.c @@ -23,7 +23,7 @@ /* ----------------------------------- Host OS */ #include <dspbridge/host_os.h> #include <plat/dmtimer.h> -#include <plat/mcbsp.h> +#include <linux/platform_data/asoc-ti-mcbsp.h> /* ----------------------------------- DSP/BIOS Bridge */ #include <dspbridge/dbdefs.h> diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c index 012c5a0cc6c..066a3ceec65 100644 --- a/drivers/staging/tidspbridge/core/tiomap3430.c +++ b/drivers/staging/tidspbridge/core/tiomap3430.c @@ -16,7 +16,7 @@ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. */ -#include <plat/dsp.h> +#include <linux/platform_data/dsp-omap.h> #include <linux/types.h> /* ----------------------------------- Host OS */ diff --git a/drivers/staging/tidspbridge/core/tiomap3430_pwr.c b/drivers/staging/tidspbridge/core/tiomap3430_pwr.c index 58a1d6dcf09..dafa6d9b294 100644 --- a/drivers/staging/tidspbridge/core/tiomap3430_pwr.c +++ b/drivers/staging/tidspbridge/core/tiomap3430_pwr.c @@ -19,7 +19,7 @@ /* ----------------------------------- Host OS */ #include <dspbridge/host_os.h> -#include <plat/dsp.h> +#include <linux/platform_data/dsp-omap.h> /* ----------------------------------- DSP/BIOS Bridge */ #include <dspbridge/dbdefs.h> diff --git a/drivers/staging/tidspbridge/core/tiomap_io.c b/drivers/staging/tidspbridge/core/tiomap_io.c index 7fda10c3686..f53ed98d18c 100644 --- a/drivers/staging/tidspbridge/core/tiomap_io.c +++ b/drivers/staging/tidspbridge/core/tiomap_io.c @@ -16,7 +16,7 @@ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. */ -#include <plat/dsp.h> +#include <linux/platform_data/dsp-omap.h> /* ----------------------------------- DSP/BIOS Bridge */ #include <dspbridge/dbdefs.h> diff --git a/drivers/staging/tidspbridge/core/wdt.c b/drivers/staging/tidspbridge/core/wdt.c index e5adad08f1c..1dce36fb828 100644 --- a/drivers/staging/tidspbridge/core/wdt.c +++ b/drivers/staging/tidspbridge/core/wdt.c @@ -26,7 +26,7 @@ #define OMAP34XX_WDT3_BASE (0x49000000 + 0x30000) -#define INT_34XX_WDT3_IRQ 36 +#define INT_34XX_WDT3_IRQ (36 + NR_IRQS) static struct dsp_wdt_setting dsp_wdt; diff --git a/drivers/staging/tidspbridge/rmgr/drv_interface.c b/drivers/staging/tidspbridge/rmgr/drv_interface.c index 6acea2b56aa..bddea1d3b2c 100644 --- a/drivers/staging/tidspbridge/rmgr/drv_interface.c +++ b/drivers/staging/tidspbridge/rmgr/drv_interface.c @@ -16,7 +16,7 @@ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. */ -#include <plat/dsp.h> +#include <linux/platform_data/dsp-omap.h> #include <linux/types.h> #include <linux/platform_device.h> diff --git a/drivers/tty/serial/serial_ks8695.c b/drivers/tty/serial/serial_ks8695.c index 7c13639c597..9bd004f9da8 100644 --- a/drivers/tty/serial/serial_ks8695.c +++ b/drivers/tty/serial/serial_ks8695.c @@ -548,8 +548,8 @@ static struct uart_ops ks8695uart_pops = { static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = { { - .membase = (void *) KS8695_UART_VA, - .mapbase = KS8695_UART_VA, + .membase = KS8695_UART_VA, + .mapbase = KS8695_UART_PA, .iotype = SERIAL_IO_MEM, .irq = KS8695_IRQ_UART_TX, .uartclk = KS8695_CLOCK_RATE * 16, diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 2564b546ba8..4c90b510d01 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -13,7 +13,6 @@ config USB_ARCH_HAS_OHCI default y if PXA3xx default y if ARCH_EP93XX default y if ARCH_AT91 - default y if ARCH_PNX4008 default y if MFD_TC6393XB default y if ARCH_W90X900 default y if ARCH_DAVINCI_DA8XX diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index b1deb0fd419..3f1431d37e1 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -292,7 +292,7 @@ config USB_OHCI_HCD depends on USB && USB_ARCH_HAS_OHCI select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 select USB_OTG_UTILS if ARCH_OMAP - depends on USB_ISP1301 || !(ARCH_LPC32XX || ARCH_PNX4008) + depends on USB_ISP1301 || !ARCH_LPC32XX ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 2b1e8d84c87..6780010e9c3 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1049,7 +1049,7 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ohci_hcd_at91_driver #endif -#if defined(CONFIG_ARCH_PNX4008) || defined(CONFIG_ARCH_LPC32XX) +#ifdef CONFIG_ARCH_LPC32XX #include "ohci-nxp.c" #define PLATFORM_DRIVER usb_hcd_nxp_driver #endif diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index c60066a6360..e068f034cb9 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -2,7 +2,6 @@ * driver for NXP USB Host devices * * Currently supported OHCI host devices: - * - Philips PNX4008 * - NXP LPC32xx * * Authors: Dmitry Chigirev <source@mvista.com> @@ -66,38 +65,6 @@ static struct clk *usb_pll_clk; static struct clk *usb_dev_clk; static struct clk *usb_otg_clk; -static void isp1301_configure_pnx4008(void) -{ - /* PNX4008 only supports DAT_SE0 USB mode */ - /* PNX4008 R2A requires setting the MAX603 to output 3.6V */ - /* Power up externel charge-pump */ - - i2c_smbus_write_byte_data(isp1301_i2c_client, - ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0 | MC1_SPEED_REG); - i2c_smbus_write_byte_data(isp1301_i2c_client, - ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR, - ~(MC1_DAT_SE0 | MC1_SPEED_REG)); - i2c_smbus_write_byte_data(isp1301_i2c_client, - ISP1301_I2C_MODE_CONTROL_2, - MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL); - i2c_smbus_write_byte_data(isp1301_i2c_client, - ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR, - ~(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL)); - i2c_smbus_write_byte_data(isp1301_i2c_client, - ISP1301_I2C_OTG_CONTROL_1, OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN); - i2c_smbus_write_byte_data(isp1301_i2c_client, - ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR, - ~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN)); - i2c_smbus_write_byte_data(isp1301_i2c_client, - ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, 0xFF); - i2c_smbus_write_byte_data(isp1301_i2c_client, - ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR, - 0xFF); - i2c_smbus_write_byte_data(isp1301_i2c_client, - ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, - 0xFF); -} - static void isp1301_configure_lpc32xx(void) { /* LPC32XX only supports DAT_SE0 USB mode */ @@ -149,10 +116,7 @@ static void isp1301_configure_lpc32xx(void) static void isp1301_configure(void) { - if (machine_is_pnx4008()) - isp1301_configure_pnx4008(); - else - isp1301_configure_lpc32xx(); + isp1301_configure_lpc32xx(); } static inline void isp1301_vbus_on(void) @@ -241,47 +205,6 @@ static const struct hc_driver ohci_nxp_hc_driver = { .start_port_reset = ohci_start_port_reset, }; -static void nxp_set_usb_bits(void) -{ - if (machine_is_pnx4008()) { - start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N); - start_int_ack(SE_USB_OTG_ATX_INT_N); - start_int_umask(SE_USB_OTG_ATX_INT_N); - - start_int_set_rising_edge(SE_USB_OTG_TIMER_INT); - start_int_ack(SE_USB_OTG_TIMER_INT); - start_int_umask(SE_USB_OTG_TIMER_INT); - - start_int_set_rising_edge(SE_USB_I2C_INT); - start_int_ack(SE_USB_I2C_INT); - start_int_umask(SE_USB_I2C_INT); - - start_int_set_rising_edge(SE_USB_INT); - start_int_ack(SE_USB_INT); - start_int_umask(SE_USB_INT); - - start_int_set_rising_edge(SE_USB_NEED_CLK_INT); - start_int_ack(SE_USB_NEED_CLK_INT); - start_int_umask(SE_USB_NEED_CLK_INT); - - start_int_set_rising_edge(SE_USB_AHB_NEED_CLK_INT); - start_int_ack(SE_USB_AHB_NEED_CLK_INT); - start_int_umask(SE_USB_AHB_NEED_CLK_INT); - } -} - -static void nxp_unset_usb_bits(void) -{ - if (machine_is_pnx4008()) { - start_int_mask(SE_USB_OTG_ATX_INT_N); - start_int_mask(SE_USB_OTG_TIMER_INT); - start_int_mask(SE_USB_I2C_INT); - start_int_mask(SE_USB_INT); - start_int_mask(SE_USB_NEED_CLK_INT); - start_int_mask(SE_USB_AHB_NEED_CLK_INT); - } -} - static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) { struct usb_hcd *hcd = 0; @@ -376,9 +299,6 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) goto out8; } - /* Set all USB bits in the Start Enable register */ - nxp_set_usb_bits(); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(&pdev->dev, "Failed to get MEM resource\n"); @@ -413,7 +333,6 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) nxp_stop_hc(); out8: - nxp_unset_usb_bits(); usb_put_hcd(hcd); out7: clk_disable(usb_otg_clk); @@ -441,7 +360,6 @@ static int usb_hcd_nxp_remove(struct platform_device *pdev) nxp_stop_hc(); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); - nxp_unset_usb_bits(); clk_disable(usb_pll_clk); clk_put(usb_pll_clk); clk_disable(usb_dev_clk); diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index f8b2d91851f..4531d03503c 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -24,7 +24,7 @@ #include <asm/io.h> #include <asm/mach-types.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <plat/fpga.h> #include <mach/hardware.h> diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index 53e25968ed0..7a62b95dac2 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -17,7 +17,6 @@ #include <linux/dma-mapping.h> #include <linux/slab.h> #include <plat/dma.h> -#include <plat/mux.h> #include "musb_core.h" #include "tusb6010.h" diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c index 7a88667742b..81f1f9a0be8 100644 --- a/drivers/usb/otg/isp1301_omap.c +++ b/drivers/usb/otg/isp1301_omap.c @@ -36,7 +36,7 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <plat/mux.h> +#include <mach/mux.h> #include <mach/usb.h> diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c index bfdc5fbeaa1..9a046a4c98f 100644 --- a/drivers/video/backlight/omap1_bl.c +++ b/drivers/video/backlight/omap1_bl.c @@ -27,10 +27,10 @@ #include <linux/fb.h> #include <linux/backlight.h> #include <linux/slab.h> +#include <linux/platform_data/omap1_bl.h> #include <mach/hardware.h> -#include <plat/board.h> -#include <plat/mux.h> +#include <mach/mux.h> #define OMAPBL_MAX_INTENSITY 0xff diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c index 7ae9d53f2bf..113d43a16f5 100644 --- a/drivers/video/da8xx-fb.c +++ b/drivers/video/da8xx-fb.c @@ -131,7 +131,7 @@ #define UPPER_MARGIN 32 #define LOWER_MARGIN 32 -static resource_size_t da8xx_fb_reg_base; +static void __iomem *da8xx_fb_reg_base; static struct resource *lcdc_regs; static unsigned int lcd_revision; static irq_handler_t lcdc_irq_handler; @@ -951,7 +951,7 @@ static int __devexit fb_remove(struct platform_device *dev) clk_disable(par->lcdc_clk); clk_put(par->lcdc_clk); framebuffer_release(info); - iounmap((void __iomem *)da8xx_fb_reg_base); + iounmap(da8xx_fb_reg_base); release_mem_region(lcdc_regs->start, resource_size(lcdc_regs)); } @@ -1171,7 +1171,7 @@ static int __devinit fb_probe(struct platform_device *device) if (!lcdc_regs) return -EBUSY; - da8xx_fb_reg_base = (resource_size_t)ioremap(lcdc_regs->start, len); + da8xx_fb_reg_base = ioremap(lcdc_regs->start, len); if (!da8xx_fb_reg_base) { ret = -EBUSY; goto err_request_mem; @@ -1392,7 +1392,7 @@ err_clk_put: clk_put(fb_clk); err_ioremap: - iounmap((void __iomem *)da8xx_fb_reg_base); + iounmap(da8xx_fb_reg_base); err_request_mem: release_mem_region(lcdc_regs->start, len); diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c index d3a31132722..ed4cad87fbc 100644 --- a/drivers/video/omap/lcd_ams_delta.c +++ b/drivers/video/omap/lcd_ams_delta.c @@ -27,8 +27,7 @@ #include <linux/lcd.h> #include <linux/gpio.h> -#include <plat/board-ams-delta.h> -#include <mach/hardware.h> +#include <mach/board-ams-delta.h> #include "omapfb.h" diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/omap/lcd_mipid.c index e3880c4a0bb..b739600c51a 100644 --- a/drivers/video/omap/lcd_mipid.c +++ b/drivers/video/omap/lcd_mipid.c @@ -25,7 +25,7 @@ #include <linux/spi/spi.h> #include <linux/module.h> -#include <plat/lcd_mipid.h> +#include <linux/platform_data/lcd-mipid.h> #include "omapfb.h" diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c index 5914220dfa9..3aa62da8919 100644 --- a/drivers/video/omap/lcd_osk.c +++ b/drivers/video/omap/lcd_osk.c @@ -24,7 +24,7 @@ #include <linux/platform_device.h> #include <asm/gpio.h> -#include <plat/mux.h> +#include <mach/mux.h> #include "omapfb.h" static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index 5b289c5f695..ee9e29639dc 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -37,6 +37,7 @@ #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <plat/cpu.h> #include <plat/clock.h> #include <video/omapdss.h> diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c index fc671d3d800..3c39aa8de92 100644 --- a/drivers/video/omap2/omapfb/omapfb-main.c +++ b/drivers/video/omap2/omapfb/omapfb-main.c @@ -31,6 +31,7 @@ #include <linux/omapfb.h> #include <video/omapdss.h> +#include <plat/cpu.h> #include <plat/vram.h> #include <plat/vrfb.h> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 53d75719078..ad1bb9382a9 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -237,12 +237,12 @@ config OMAP_WATCHDOG here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer. config PNX4008_WATCHDOG - tristate "PNX4008 and LPC32XX Watchdog" - depends on ARCH_PNX4008 || ARCH_LPC32XX + tristate "LPC32XX Watchdog" + depends on ARCH_LPC32XX select WATCHDOG_CORE help Say Y here if to include support for the watchdog timer - in the PNX4008 or LPC32XX processor. + in the LPC32XX processor. This driver can be built as a module by choosing M. The module will be called pnx4008_wdt. diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c index 59e75d9a6b7..c1a4d3bf581 100644 --- a/drivers/watchdog/ks8695_wdt.c +++ b/drivers/watchdog/ks8695_wdt.c @@ -24,7 +24,19 @@ #include <linux/io.h> #include <linux/uaccess.h> #include <mach/hardware.h> -#include <mach/regs-timer.h> + +#define KS8695_TMR_OFFSET (0xF0000 + 0xE400) +#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET) + +/* + * Timer registers + */ +#define KS8695_TMCON (0x00) /* Timer Control Register */ +#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */ +#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */ + +/* Timer0 Timeout Counter Register */ +#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */ #define WDT_DEFAULT_TIME 5 /* seconds */ #define WDT_MAX_TIME 171 /* seconds */ diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index fceec4f4eb7..f5db18dbc0f 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -46,6 +46,7 @@ #include <linux/slab.h> #include <linux/pm_runtime.h> #include <mach/hardware.h> +#include <plat/cpu.h> #include <plat/prcm.h> #include "omap_wdt.h" @@ -218,12 +219,16 @@ static long omap_wdt_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETSTATUS: return put_user(0, (int __user *)arg); case WDIOC_GETBOOTSTATUS: +#ifdef CONFIG_ARCH_OMAP1 if (cpu_is_omap16xx()) return put_user(__raw_readw(ARM_SYSST), (int __user *)arg); +#endif +#ifdef CONFIG_ARCH_OMAP2PLUS if (cpu_is_omap24xx()) return put_user(omap_prcm_get_reset_sources(), (int __user *)arg); +#endif return put_user(0, (int __user *)arg); case WDIOC_KEEPALIVE: spin_lock(&wdt_lock); |