aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorWolfram Sang <w.sang@pengutronix.de>2009-11-13 06:14:52 +0000
committerDavid S. Miller <davem@davemloft.net>2009-11-13 20:47:03 -0800
commitafa17a500a3667f66df450100538d06769529bba (patch)
treed3e134c679b2ee54733eeced15a99b62548ebf93 /drivers
parent888801357f240daee5d310327867d834bc05183b (diff)
net/can: add driver for mscan family & mpc52xx_mscan
Taken from socketcan-svn, fixed remaining todos, cleaned up, tested with a phyCORE-MPC5200B-IO and a custom board. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/can/Kconfig19
-rw-r--r--drivers/net/can/Makefile1
-rw-r--r--drivers/net/can/mscan/Makefile5
-rw-r--r--drivers/net/can/mscan/mpc52xx_can.c279
-rw-r--r--drivers/net/can/mscan/mscan.c699
-rw-r--r--drivers/net/can/mscan/mscan.h262
6 files changed, 1265 insertions, 0 deletions
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index b819cc2a429..c16e6ff139d 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -108,6 +108,25 @@ config CAN_MCP251X
---help---
Driver for the Microchip MCP251x SPI CAN controllers.
+config CAN_MSCAN
+ depends on CAN_DEV && (PPC || M68K || M68KNOMMU)
+ tristate "Support for Freescale MSCAN based chips"
+ ---help---
+ The Motorola Scalable Controller Area Network (MSCAN) definition
+ is based on the MSCAN12 definition which is the specific
+ implementation of the Motorola Scalable CAN concept targeted for
+ the Motorola MC68HC12 Microcontroller Family.
+
+config CAN_MPC52XX
+ tristate "Freescale MPC5xxx onboard CAN controller"
+ depends on CAN_MSCAN && PPC_MPC52xx
+ ---help---
+ If you say yes here you get support for Freescale's MPC52xx
+ onboard dualCAN controller.
+
+ This driver can also be built as a module. If so, the module
+ will be called mpc5xxx_can.
+
config CAN_DEBUG_DEVICES
bool "CAN devices debugging messages"
depends on CAN
diff --git a/drivers/net/can/Makefile b/drivers/net/can/Makefile
index 14891817ea5..56899fef1c6 100644
--- a/drivers/net/can/Makefile
+++ b/drivers/net/can/Makefile
@@ -10,6 +10,7 @@ can-dev-y := dev.o
obj-y += usb/
obj-$(CONFIG_CAN_SJA1000) += sja1000/
+obj-$(CONFIG_CAN_MSCAN) += mscan/
obj-$(CONFIG_CAN_AT91) += at91_can.o
obj-$(CONFIG_CAN_TI_HECC) += ti_hecc.o
obj-$(CONFIG_CAN_MCP251X) += mcp251x.o
diff --git a/drivers/net/can/mscan/Makefile b/drivers/net/can/mscan/Makefile
new file mode 100644
index 00000000000..2bd9f04c790
--- /dev/null
+++ b/drivers/net/can/mscan/Makefile
@@ -0,0 +1,5 @@
+
+obj-$(CONFIG_CAN_MPC52XX) += mscan-mpc52xx.o
+mscan-mpc52xx-objs := mscan.o mpc52xx_can.o
+
+ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
diff --git a/drivers/net/can/mscan/mpc52xx_can.c b/drivers/net/can/mscan/mpc52xx_can.c
new file mode 100644
index 00000000000..4707a82f1ae
--- /dev/null
+++ b/drivers/net/can/mscan/mpc52xx_can.c
@@ -0,0 +1,279 @@
+/*
+ * CAN bus driver for the Freescale MPC5xxx embedded CPU.
+ *
+ * Copyright (C) 2004-2005 Andrey Volkov <avolkov@varma-el.com>,
+ * Varma Electronics Oy
+ * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
+ * Copyright (C) 2009 Wolfram Sang, Pengutronix <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/netdevice.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/of_platform.h>
+#include <sysdev/fsl_soc.h>
+#include <linux/io.h>
+#include <asm/mpc52xx.h>
+
+#include "mscan.h"
+
+
+#define DRV_NAME "mpc5xxx_can"
+
+static struct of_device_id mpc52xx_cdm_ids[] __devinitdata = {
+ { .compatible = "fsl,mpc5200-cdm", },
+ { .compatible = "fsl,mpc5200b-cdm", },
+ {}
+};
+
+/*
+ * Get the frequency of the external oscillator clock connected
+ * to the SYS_XTAL_IN pin, or return 0 if it cannot be determined.
+ */
+static unsigned int __devinit mpc52xx_can_xtal_freq(struct of_device *of)
+{
+ struct mpc52xx_cdm __iomem *cdm;
+ struct device_node *np_cdm;
+ unsigned int freq;
+ u32 val;
+
+ freq = mpc5xxx_get_bus_frequency(of->node);
+ if (!freq)
+ return 0;
+
+ /*
+ * Determine SYS_XTAL_IN frequency from the clock domain settings
+ */
+ np_cdm = of_find_matching_node(NULL, mpc52xx_cdm_ids);
+ if (!np_cdm) {
+ dev_err(&of->dev, "can't get clock node!\n");
+ return 0;
+ }
+ cdm = of_iomap(np_cdm, 0);
+ of_node_put(np_cdm);
+
+ if (in_8(&cdm->ipb_clk_sel) & 0x1)
+ freq *= 2;
+ val = in_be32(&cdm->rstcfg);
+ if (val & (1 << 5))
+ freq *= 8;
+ else
+ freq *= 4;
+ if (val & (1 << 6))
+ freq /= 12;
+ else
+ freq /= 16;
+
+ iounmap(cdm);
+
+ return freq;
+}
+
+/*
+ * Get frequency of the MSCAN clock source
+ *
+ * Either the oscillator clock (SYS_XTAL_IN) or the IP bus clock (IP_CLK)
+ * can be selected. According to the MPC5200 user's manual, the oscillator
+ * clock is the better choice as it has less jitter but due to a hardware
+ * bug, it can not be selected for the old MPC5200 Rev. A chips.
+ */
+
+static unsigned int __devinit mpc52xx_can_clock_freq(struct of_device *of,
+ int clock_src)
+{
+ unsigned int pvr;
+
+ pvr = mfspr(SPRN_PVR);
+
+ if (clock_src == MSCAN_CLKSRC_BUS || pvr == 0x80822011)
+ return mpc5xxx_get_bus_frequency(of->node);
+
+ return mpc52xx_can_xtal_freq(of);
+}
+
+static int __devinit mpc5xxx_can_probe(struct of_device *ofdev,
+ const struct of_device_id *id)
+{
+ struct device_node *np = ofdev->node;
+ struct net_device *dev;
+ struct mscan_priv *priv;
+ void __iomem *base;
+ const char *clk_src;
+ int err, irq, clock_src;
+
+ base = of_iomap(ofdev->node, 0);
+ if (!base) {
+ dev_err(&ofdev->dev, "couldn't ioremap\n");
+ err = -ENOMEM;
+ goto exit_release_mem;
+ }
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq) {
+ dev_err(&ofdev->dev, "no irq found\n");
+ err = -ENODEV;
+ goto exit_unmap_mem;
+ }
+
+ dev = alloc_mscandev();
+ if (!dev) {
+ err = -ENOMEM;
+ goto exit_dispose_irq;
+ }
+
+ priv = netdev_priv(dev);
+ priv->reg_base = base;
+ dev->irq = irq;
+
+ /*
+ * Either the oscillator clock (SYS_XTAL_IN) or the IP bus clock
+ * (IP_CLK) can be selected as MSCAN clock source. According to
+ * the MPC5200 user's manual, the oscillator clock is the better
+ * choice as it has less jitter. For this reason, it is selected
+ * by default.
+ */
+ clk_src = of_get_property(np, "fsl,mscan-clk-src", NULL);
+ if (clk_src && strcmp(clk_src, "ip") == 0)
+ clock_src = MSCAN_CLKSRC_BUS;
+ else
+ clock_src = MSCAN_CLKSRC_XTAL;
+ priv->can.clock.freq = mpc52xx_can_clock_freq(ofdev, clock_src);
+ if (!priv->can.clock.freq) {
+ dev_err(&ofdev->dev, "couldn't get MSCAN clock frequency\n");
+ err = -ENODEV;
+ goto exit_free_mscan;
+ }
+
+ SET_NETDEV_DEV(dev, &ofdev->dev);
+
+ err = register_mscandev(dev, clock_src);
+ if (err) {
+ dev_err(&ofdev->dev, "registering %s failed (err=%d)\n",
+ DRV_NAME, err);
+ goto exit_free_mscan;
+ }
+
+ dev_set_drvdata(&ofdev->dev, dev);
+
+ dev_info(&ofdev->dev, "MSCAN at 0x%p, irq %d, clock %d Hz\n",
+ priv->reg_base, dev->irq, priv->can.clock.freq);
+
+ return 0;
+
+exit_free_mscan:
+ free_candev(dev);
+exit_dispose_irq:
+ irq_dispose_mapping(irq);
+exit_unmap_mem:
+ iounmap(base);
+exit_release_mem:
+ return err;
+}
+
+static int __devexit mpc5xxx_can_remove(struct of_device *ofdev)
+{
+ struct net_device *dev = dev_get_drvdata(&ofdev->dev);
+ struct mscan_priv *priv = netdev_priv(dev);
+
+ dev_set_drvdata(&ofdev->dev, NULL);
+
+ unregister_mscandev(dev);
+ iounmap(priv->reg_base);
+ irq_dispose_mapping(dev->irq);
+ free_candev(dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static struct mscan_regs saved_regs;
+static int mpc5xxx_can_suspend(struct of_device *ofdev, pm_message_t state)
+{
+ struct net_device *dev = dev_get_drvdata(&ofdev->dev);
+ struct mscan_priv *priv = netdev_priv(dev);
+ struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+
+ _memcpy_fromio(&saved_regs, regs, sizeof(*regs));
+
+ return 0;
+}
+
+static int mpc5xxx_can_resume(struct of_device *ofdev)
+{
+ struct net_device *dev = dev_get_drvdata(&ofdev->dev);
+ struct mscan_priv *priv = netdev_priv(dev);
+ struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+
+ regs->canctl0 |= MSCAN_INITRQ;
+ while ((regs->canctl1 & MSCAN_INITAK) == 0)
+ udelay(10);
+
+ regs->canctl1 = saved_regs.canctl1;
+ regs->canbtr0 = saved_regs.canbtr0;
+ regs->canbtr1 = saved_regs.canbtr1;
+ regs->canidac = saved_regs.canidac;
+
+ /* restore masks, buffers etc. */
+ _memcpy_toio(&regs->canidar1_0, (void *)&saved_regs.canidar1_0,
+ sizeof(*regs) - offsetof(struct mscan_regs, canidar1_0));
+
+ regs->canctl0 &= ~MSCAN_INITRQ;
+ regs->cantbsel = saved_regs.cantbsel;
+ regs->canrier = saved_regs.canrier;
+ regs->cantier = saved_regs.cantier;
+ regs->canctl0 = saved_regs.canctl0;
+
+ return 0;
+}
+#endif
+
+static struct of_device_id __devinitdata mpc5xxx_can_table[] = {
+ {.compatible = "fsl,mpc5200-mscan"},
+ {.compatible = "fsl,mpc5200b-mscan"},
+ {},
+};
+
+static struct of_platform_driver mpc5xxx_can_driver = {
+ .owner = THIS_MODULE,
+ .name = "mpc5xxx_can",
+ .probe = mpc5xxx_can_probe,
+ .remove = __devexit_p(mpc5xxx_can_remove),
+#ifdef CONFIG_PM
+ .suspend = mpc5xxx_can_suspend,
+ .resume = mpc5xxx_can_resume,
+#endif
+ .match_table = mpc5xxx_can_table,
+};
+
+static int __init mpc5xxx_can_init(void)
+{
+ return of_register_platform_driver(&mpc5xxx_can_driver);
+}
+module_init(mpc5xxx_can_init);
+
+static void __exit mpc5xxx_can_exit(void)
+{
+ return of_unregister_platform_driver(&mpc5xxx_can_driver);
+};
+module_exit(mpc5xxx_can_exit);
+
+MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
+MODULE_DESCRIPTION("Freescale MPC5200 CAN driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
new file mode 100644
index 00000000000..49542cab9df
--- /dev/null
+++ b/drivers/net/can/mscan/mscan.c
@@ -0,0 +1,699 @@
+/*
+ * CAN bus driver for the alone generic (as possible as) MSCAN controller.
+ *
+ * Copyright (C) 2005-2006 Andrey Volkov <avolkov@varma-el.com>,
+ * Varma Electronics Oy
+ * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
+ * Copytight (C) 2008-2009 Pengutronix <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/if_ether.h>
+#include <linux/list.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+#include <linux/io.h>
+
+#include "mscan.h"
+
+#define MSCAN_NORMAL_MODE 0
+#define MSCAN_SLEEP_MODE MSCAN_SLPRQ
+#define MSCAN_INIT_MODE (MSCAN_INITRQ | MSCAN_SLPRQ)
+#define MSCAN_POWEROFF_MODE (MSCAN_CSWAI | MSCAN_SLPRQ)
+#define MSCAN_SET_MODE_RETRIES 255
+#define MSCAN_ECHO_SKB_MAX 3
+
+#define BTR0_BRP_MASK 0x3f
+#define BTR0_SJW_SHIFT 6
+#define BTR0_SJW_MASK (0x3 << BTR0_SJW_SHIFT)
+
+#define BTR1_TSEG1_MASK 0xf
+#define BTR1_TSEG2_SHIFT 4
+#define BTR1_TSEG2_MASK (0x7 << BTR1_TSEG2_SHIFT)
+#define BTR1_SAM_SHIFT 7
+
+#define BTR0_SET_BRP(brp) (((brp) - 1) & BTR0_BRP_MASK)
+#define BTR0_SET_SJW(sjw) ((((sjw) - 1) << BTR0_SJW_SHIFT) & \
+ BTR0_SJW_MASK)
+
+#define BTR1_SET_TSEG1(tseg1) (((tseg1) - 1) & BTR1_TSEG1_MASK)
+#define BTR1_SET_TSEG2(tseg2) ((((tseg2) - 1) << BTR1_TSEG2_SHIFT) & \
+ BTR1_TSEG2_MASK)
+#define BTR1_SET_SAM(sam) ((sam) ? 1 << BTR1_SAM_SHIFT : 0)
+
+static struct can_bittiming_const mscan_bittiming_const = {
+ .name = "mscan",
+ .tseg1_min = 4,
+ .tseg1_max = 16,
+ .tseg2_min = 2,
+ .tseg2_max = 8,
+ .sjw_max = 4,
+ .brp_min = 1,
+ .brp_max = 64,
+ .brp_inc = 1,
+};
+
+struct mscan_state {
+ u8 mode;
+ u8 canrier;
+ u8 cantier;
+};
+
+#define F_RX_PROGRESS 0
+#define F_TX_PROGRESS 1
+#define F_TX_WAIT_ALL 2
+
+static enum can_state state_map[] = {
+ CAN_STATE_ERROR_ACTIVE,
+ CAN_STATE_ERROR_WARNING,
+ CAN_STATE_ERROR_PASSIVE,
+ CAN_STATE_BUS_OFF
+};
+
+static int mscan_set_mode(struct net_device *dev, u8 mode)
+{
+ struct mscan_priv *priv = netdev_priv(dev);
+ struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+ int ret = 0;
+ int i;
+ u8 canctl1;
+
+ if (mode != MSCAN_NORMAL_MODE) {
+
+ if (priv->tx_active) {
+ /* Abort transfers before going to sleep */#
+ out_8(&regs->cantarq, priv->tx_active);
+ /* Suppress TX done interrupts */
+ out_8(&regs->cantier, 0);
+ }
+
+ canctl1 = in_8(&regs->canctl1);
+ if ((mode & MSCAN_SLPRQ) && (canctl1 & MSCAN_SLPAK) == 0) {
+ out_8(&regs->canctl0,
+ in_8(&regs->canctl0) | MSCAN_SLPRQ);
+ for (i = 0; i < MSCAN_SET_MODE_RETRIES; i++) {
+ if (in_8(&regs->canctl1) & MSCAN_SLPAK)
+ break;
+ udelay(100);
+ }
+ /*
+ * The mscan controller will fail to enter sleep mode,
+ * while there are irregular activities on bus, like
+ * somebody keeps retransmitting. This behavior is
+ * undocumented and seems to differ between mscan built
+ * in mpc5200b and mpc5200. We proceed in that case,
+ * since otherwise the slprq will be kept set and the
+ * controller will get stuck. NOTE: INITRQ or CSWAI
+ * will abort all active transmit actions, if still
+ * any, at once.
+ */
+ if (i >= MSCAN_SET_MODE_RETRIES)
+ dev_dbg(dev->dev.parent,
+ "device failed to enter sleep mode. "
+ "We proceed anyhow.\n");
+ else
+ priv->can.state = CAN_STATE_SLEEPING;
+ }
+
+ if ((mode & MSCAN_INITRQ) && (canctl1 & MSCAN_INITAK) == 0) {
+ out_8(&regs->canctl0,
+ in_8(&regs->canctl0) | MSCAN_INITRQ);
+ for (i = 0; i < MSCAN_SET_MODE_RETRIES; i++) {
+ if (in_8(&regs->canctl1) & MSCAN_INITAK)
+ break;
+ }
+ if (i >= MSCAN_SET_MODE_RETRIES)
+ ret = -ENODEV;
+ }
+ if (!ret)
+ priv->can.state = CAN_STATE_STOPPED;
+
+ if (mode & MSCAN_CSWAI)
+ out_8(&regs->canctl0,
+ in_8(&regs->canctl0) | MSCAN_CSWAI);
+
+ } else {
+ canctl1 = in_8(&regs->canctl1);
+ if (canctl1 & (MSCAN_SLPAK | MSCAN_INITAK)) {
+ out_8(&regs->canctl0, in_8(&regs->canctl0) &
+ ~(MSCAN_SLPRQ | MSCAN_INITRQ));
+ for (i = 0; i < MSCAN_SET_MODE_RETRIES; i++) {
+ canctl1 = in_8(&regs->canctl1);
+ if (!(canctl1 & (MSCAN_INITAK | MSCAN_SLPAK)))
+ break;
+ }
+ if (i >= MSCAN_SET_MODE_RETRIES)
+ ret = -ENODEV;
+ else
+ priv->can.state = CAN_STATE_ERROR_ACTIVE;
+ }
+ }
+ return ret;
+}
+
+static int mscan_start(struct net_device *dev)
+{
+ struct mscan_priv *priv = netdev_priv(dev);
+ struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+ u8 canrflg;
+ int err;
+
+ out_8(&regs->canrier, 0);
+
+ INIT_LIST_HEAD(&priv->tx_head);
+ priv->prev_buf_id = 0;
+ priv->cur_pri = 0;
+ priv->tx_active = 0;
+ priv->shadow_canrier = 0;
+ priv->flags = 0;
+
+ err = mscan_set_mode(dev, MSCAN_NORMAL_MODE);
+ if (err)
+ return err;
+
+ canrflg = in_8(&regs->canrflg);
+ priv->shadow_statflg = canrflg & MSCAN_STAT_MSK;
+ priv->can.state = state_map[max(MSCAN_STATE_RX(canrflg),
+ MSCAN_STATE_TX(canrflg))];
+ out_8(&regs->cantier, 0);
+
+ /* Enable receive interrupts. */
+ out_8(&regs->canrier, MSCAN_OVRIE | MSCAN_RXFIE | MSCAN_CSCIE |
+ MSCAN_RSTATE1 | MSCAN_RSTATE0 | MSCAN_TSTATE1 | MSCAN_TSTATE0);
+
+ return 0;
+}
+
+static netdev_tx_t mscan_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct can_frame *frame = (struct can_frame *)skb->data;
+ struct mscan_priv *priv = netdev_priv(dev);
+ struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+ int i, rtr, buf_id;
+ u32 can_id;
+
+ if (frame->can_dlc > 8)
+ return -EINVAL;
+
+ out_8(&regs->cantier, 0);
+
+ i = ~priv->tx_active & MSCAN_TXE;
+ buf_id = ffs(i) - 1;
+ switch (hweight8(i)) {
+ case 0:
+ netif_stop_queue(dev);
+ dev_err(dev->dev.parent, "Tx Ring full when queue awake!\n");
+ return NETDEV_TX_BUSY;
+ case 1:
+ /*
+ * if buf_id < 3, then current frame will be send out of order,
+ * since buffer with lower id have higher priority (hell..)
+ */
+ netif_stop_queue(dev);
+ case 2:
+ if (buf_id < priv->prev_buf_id) {
+ priv->cur_pri++;
+ if (priv->cur_pri == 0xff) {
+ set_bit(F_TX_WAIT_ALL, &priv->flags);
+ netif_stop_queue(dev);
+ }
+ }
+ set_bit(F_TX_PROGRESS, &priv->flags);
+ break;
+ }
+ priv->prev_buf_id = buf_id;
+ out_8(&regs->cantbsel, i);
+
+ rtr = frame->can_id & CAN_RTR_FLAG;
+
+ if (frame->can_id & CAN_EFF_FLAG) {
+ can_id = (frame->can_id & CAN_EFF_MASK) << 1;
+ if (rtr)
+ can_id |= 1;
+ out_be16(&regs->tx.idr3_2, can_id);
+
+ can_id >>= 16;
+ can_id = (can_id & 0x7) | ((can_id << 2) & 0xffe0) | (3 << 3);
+ } else {
+ can_id = (frame->can_id & CAN_SFF_MASK) << 5;
+ if (rtr)
+ can_id |= 1 << 4;
+ }
+ out_be16(&regs->tx.idr1_0, can_id);
+
+ if (!rtr) {
+ void __iomem *data = &regs->tx.dsr1_0;
+ u16 *payload = (u16 *) frame->data;
+ /* It is safe to write into dsr[dlc+1] */
+ for (i = 0; i < (frame->can_dlc + 1) / 2; i++) {
+ out_be16(data, *payload++);
+ data += 2 + _MSCAN_RESERVED_DSR_SIZE;
+ }
+ }
+
+ out_8(&regs->tx.dlr, frame->can_dlc);
+ out_8(&regs->tx.tbpr, priv->cur_pri);
+
+ /* Start transmission. */
+ out_8(&regs->cantflg, 1 << buf_id);
+
+ if (!test_bit(F_TX_PROGRESS, &priv->flags))
+ dev->trans_start = jiffies;
+
+ list_add_tail(&priv->tx_queue[buf_id].list, &priv->tx_head);
+
+ can_put_echo_skb(skb, dev, buf_id);
+
+ /* Enable interrupt. */
+ priv->tx_active |= 1 << buf_id;
+ out_8(&regs->cantier, priv->tx_active);
+
+ return NETDEV_TX_OK;
+}
+
+/* This function returns the old state to see where we came from */
+static enum can_state check_set_state(struct net_device *dev, u8 canrflg)
+{
+ struct mscan_priv *priv = netdev_priv(dev);
+ enum can_state state, old_state = priv->can.state;
+
+ if (canrflg & MSCAN_CSCIF && old_state <= CAN_STATE_BUS_OFF) {
+ state = state_map[max(MSCAN_STATE_RX(canrflg),
+ MSCAN_STATE_TX(canrflg))];
+ priv->can.state = state;
+ }
+ return old_state;
+}
+
+static void mscan_get_rx_frame(struct net_device *dev, struct can_frame *frame)
+{
+ struct mscan_priv *priv = netdev_priv(dev);
+ struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+ u32 can_id;
+ int i;
+
+ can_id = in_be16(&regs->rx.idr1_0);
+ if (can_id & (1 << 3)) {
+ frame->can_id = CAN_EFF_FLAG;
+ can_id = ((can_id << 16) | in_be16(&regs->rx.idr3_2));
+ can_id = ((can_id & 0xffe00000) |
+ ((can_id & 0x7ffff) << 2)) >> 2;
+ } else {
+ can_id >>= 4;
+ frame->can_id = 0;
+ }
+
+ frame->can_id |= can_id >> 1;
+ if (can_id & 1)
+ frame->can_id |= CAN_RTR_FLAG;
+ frame->can_dlc = in_8(&regs->rx.dlr) & 0xf;
+
+ if (!(frame->can_id & CAN_RTR_FLAG)) {
+ void __iomem *data = &regs->rx.dsr1_0;
+ u16 *payload = (u16 *) frame->data;
+ for (i = 0; i < (frame->can_dlc + 1) / 2; i++) {
+ *payload++ = in_be16(data);
+ data += 2 + _MSCAN_RESERVED_DSR_SIZE;
+ }
+ }
+
+ out_8(&regs->canrflg, MSCAN_RXF);
+}
+
+static void mscan_get_err_frame(struct net_device *dev, struct can_frame *frame,
+ u8 canrflg)
+{
+ struct mscan_priv *priv = netdev_priv(dev);
+ struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+ struct net_device_stats *stats = &dev->stats;
+ enum can_state old_state;
+
+ dev_dbg(dev->dev.parent, "error interrupt (canrflg=%#x)\n", canrflg);
+ frame->can_id = CAN_ERR_FLAG;
+
+ if (canrflg & MSCAN_OVRIF) {
+ frame->can_id |= CAN_ERR_CRTL;
+ frame->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+ stats->rx_over_errors++;
+ stats->rx_errors++;
+ } else
+ frame->data[1] = 0;
+
+ old_state = check_set_state(dev, canrflg);
+ /* State changed */
+ if (old_state != priv->can.state) {
+ switch (priv->can.state) {
+ case CAN_STATE_ERROR_WARNING:
+ frame->can_id |= CAN_ERR_CRTL;
+ priv->can.can_stats.error_warning++;
+ if ((priv->shadow_statflg & MSCAN_RSTAT_MSK) <
+ (canrflg & MSCAN_RSTAT_MSK))
+ frame->data[1] |= CAN_ERR_CRTL_RX_WARNING;
+
+ if ((priv->shadow_statflg & MSCAN_TSTAT_MSK) <
+ (canrflg & MSCAN_TSTAT_MSK))
+ frame->data[1] |= CAN_ERR_CRTL_TX_WARNING;
+ break;
+ case CAN_STATE_ERROR_PASSIVE:
+ frame->can_id |= CAN_ERR_CRTL;
+ priv->can.can_stats.error_passive++;
+ frame->data[1] |= CAN_ERR_CRTL_RX_PASSIVE;
+ break;
+ case CAN_STATE_BUS_OFF:
+ frame->can_id |= CAN_ERR_BUSOFF;
+ /*
+ * The MSCAN on the MPC5200 does recover from bus-off
+ * automatically. To avoid that we stop the chip doing
+ * a light-weight stop (we are in irq-context).
+ */
+ out_8(&regs->cantier, 0);
+ out_8(&regs->canrier, 0);
+ out_8(&regs->canctl0, in_8(&regs->canctl0) |
+ MSCAN_SLPRQ | MSCAN_INITRQ);
+ can_bus_off(dev);
+ break;
+ default:
+ break;
+ }
+ }
+ priv->shadow_statflg = canrflg & MSCAN_STAT_MSK;
+ frame->can_dlc = CAN_ERR_DLC;
+ out_8(&regs->canrflg, MSCAN_ERR_IF);
+}
+
+static int mscan_rx_poll(struct napi_struct *napi, int quota)
+{
+ struct mscan_priv *priv = container_of(napi, struct mscan_priv, napi);
+ struct net_device *dev = napi->dev;
+ struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+ struct net_device_stats *stats = &dev->stats;
+ int npackets = 0;
+ int ret = 1;
+ struct sk_buff *skb;
+ struct can_frame *frame;
+ u8 canrflg;
+
+ while (npackets < quota && ((canrflg = in_8(&regs->canrflg)) &
+ (MSCAN_RXF | MSCAN_ERR_IF))) {
+
+ skb = alloc_can_skb(dev, &frame);
+ if (!skb) {
+ if (printk_ratelimit())
+ dev_notice(dev->dev.parent, "packet dropped\n");
+ stats->rx_dropped++;
+ out_8(&regs->canrflg, canrflg);
+ continue;
+ }
+
+ if (canrflg & MSCAN_RXF)
+ mscan_get_rx_frame(dev, frame);
+ else if (canrflg & MSCAN_ERR_IF)
+ mscan_get_err_frame(dev, frame, canrflg);
+
+ stats->rx_packets++;
+ stats->rx_bytes += frame->can_dlc;
+ npackets++;
+ netif_receive_skb(skb);
+ }
+
+ if (!(in_8(&regs->canrflg) & (MSCAN_RXF | MSCAN_ERR_IF))) {
+ napi_complete(&priv->napi);
+ clear_bit(F_RX_PROGRESS, &priv->flags);
+ if (priv->can.state < CAN_STATE_BUS_OFF)
+ out_8(&regs->canrier, priv->shadow_canrier);
+ ret = 0;
+ }
+ return ret;
+}
+
+static irqreturn_t mscan_isr(int irq, void *dev_id)
+{
+ struct net_device *dev = (struct net_device *)dev_id;
+ struct mscan_priv *priv = netdev_priv(dev);
+ struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+ struct net_device_stats *stats = &dev->stats;
+ u8 cantier, cantflg, canrflg;
+ irqreturn_t ret = IRQ_NONE;
+
+ cantier = in_8(&regs->cantier) & MSCAN_TXE;
+ cantflg = in_8(&regs->cantflg) & cantier;
+
+ if (cantier && cantflg) {
+
+ struct list_head *tmp, *pos;
+
+ list_for_each_safe(pos, tmp, &priv->tx_head) {
+ struct tx_queue_entry *entry =
+ list_entry(pos, struct tx_queue_entry, list);
+ u8 mask = entry->mask;
+
+ if (!(cantflg & mask))
+ continue;
+
+ out_8(&regs->cantbsel, mask);
+ stats->tx_bytes += in_8(&regs->tx.dlr);
+ stats->tx_packets++;
+ can_get_echo_skb(dev, entry->id);
+ priv->tx_active &= ~mask;
+ list_del(pos);
+ }
+
+ if (list_empty(&priv->tx_head)) {
+ clear_bit(F_TX_WAIT_ALL, &priv->flags);
+ clear_bit(F_TX_PROGRESS, &priv->flags);
+ priv->cur_pri = 0;
+ } else
+ dev->trans_start = jiffies;
+
+ if (!test_bit(F_TX_WAIT_ALL, &priv->flags))
+ netif_wake_queue(dev);
+
+ out_8(&regs->cantier, priv->tx_active);
+ ret = IRQ_HANDLED;
+ }
+
+ canrflg = in_8(&regs->canrflg);
+ if ((canrflg & ~MSCAN_STAT_MSK) &&
+ !test_and_set_bit(F_RX_PROGRESS, &priv->flags)) {
+ if (canrflg & ~MSCAN_STAT_MSK) {
+ priv->shadow_canrier = in_8(&regs->canrier);
+ out_8(&regs->canrier, 0);
+ napi_schedule(&priv->napi);
+ ret = IRQ_HANDLED;
+ } else
+ clear_bit(F_RX_PROGRESS, &priv->flags);
+ }
+ return ret;
+}
+
+static int mscan_do_set_mode(struct net_device *dev, enum can_mode mode)
+{
+
+ struct mscan_priv *priv = netdev_priv(dev);
+ int ret = 0;
+
+ if (!priv->open_time)
+ return -EINVAL;
+
+ switch (mode) {
+ case CAN_MODE_SLEEP:
+ case CAN_MODE_STOP:
+ netif_stop_queue(dev);
+ mscan_set_mode(dev,
+ (mode ==
+ CAN_MODE_STOP) ? MSCAN_INIT_MODE :
+ MSCAN_SLEEP_MODE);
+ break;
+ case CAN_MODE_START:
+ if (priv->can.state <= CAN_STATE_BUS_OFF)
+ mscan_set_mode(dev, MSCAN_INIT_MODE);
+ ret = mscan_start(dev);
+ if (ret)
+ break;
+ if (netif_queue_stopped(dev))
+ netif_wake_queue(dev);
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ break;
+ }
+ return ret;
+}
+
+static int mscan_do_set_bittiming(struct net_device *dev)
+{
+ struct mscan_priv *priv = netdev_priv(dev);
+ struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+ struct can_bittiming *bt = &priv->can.bittiming;
+ u8 btr0, btr1;
+
+ btr0 = BTR0_SET_BRP(bt->brp) | BTR0_SET_SJW(bt->sjw);
+ btr1 = (BTR1_SET_TSEG1(bt->prop_seg + bt->phase_seg1) |
+ BTR1_SET_TSEG2(bt->phase_seg2) |
+ BTR1_SET_SAM(priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES));
+
+ dev_info(dev->dev.parent, "setting BTR0=0x%02x BTR1=0x%02x\n",
+ btr0, btr1);
+
+ out_8(&regs->canbtr0, btr0);
+ out_8(&regs->canbtr1, btr1);
+
+ return 0;
+}
+
+static int mscan_open(struct net_device *dev)
+{
+ int ret;
+ struct mscan_priv *priv = netdev_priv(dev);
+ struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+
+ /* common open */
+ ret = open_candev(dev);
+ if (ret)
+ return ret;
+
+ napi_enable(&priv->napi);
+
+ ret = request_irq(dev->irq, mscan_isr, 0, dev->name, dev);
+ if (ret < 0) {
+ napi_disable(&priv->napi);
+ printk(KERN_ERR "%s - failed to attach interrupt\n",
+ dev->name);
+ return ret;
+ }
+
+ priv->open_time = jiffies;
+
+ out_8(&regs->canctl1, in_8(&regs->canctl1) & ~MSCAN_LISTEN);
+
+ ret = mscan_start(dev);
+ if (ret)
+ return ret;
+
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+static int mscan_close(struct net_device *dev)
+{
+ struct mscan_priv *priv = netdev_priv(dev);
+ struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+
+ netif_stop_queue(dev);
+ napi_disable(&priv->napi);
+
+ out_8(&regs->cantier, 0);
+ out_8(&regs->canrier, 0);
+ mscan_set_mode(dev, MSCAN_INIT_MODE);
+ close_candev(dev);
+ free_irq(dev->irq, dev);
+ priv->open_time = 0;
+
+ return 0;
+}
+
+static const struct net_device_ops mscan_netdev_ops = {
+ .ndo_open = mscan_open,
+ .ndo_stop = mscan_close,
+ .ndo_start_xmit = mscan_start_xmit,
+};
+
+int register_mscandev(struct net_device *dev, int clock_src)
+{
+ struct mscan_priv *priv = netdev_priv(dev);
+ struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+ u8 ctl1;
+
+ ctl1 = in_8(&regs->canctl1);
+ if (clock_src)
+ ctl1 |= MSCAN_CLKSRC;
+ else
+ ctl1 &= ~MSCAN_CLKSRC;
+
+ ctl1 |= MSCAN_CANE;
+ out_8(&regs->canctl1, ctl1);
+ udelay(100);
+
+ /* acceptance mask/acceptance code (accept everything) */
+ out_be16(&regs->canidar1_0, 0);
+ out_be16(&regs->canidar3_2, 0);
+ out_be16(&regs->canidar5_4, 0);
+ out_be16(&regs->canidar7_6, 0);
+
+ out_be16(&regs->canidmr1_0, 0xffff);
+ out_be16(&regs->canidmr3_2, 0xffff);
+ out_be16(&regs->canidmr5_4, 0xffff);
+ out_be16(&regs->canidmr7_6, 0xffff);
+ /* Two 32 bit Acceptance Filters */
+ out_8(&regs->canidac, MSCAN_AF_32BIT);
+
+ mscan_set_mode(dev, MSCAN_INIT_MODE);
+
+ return register_candev(dev);
+}
+EXPORT_SYMBOL_GPL(register_mscandev);
+
+void unregister_mscandev(struct net_device *dev)
+{
+ struct mscan_priv *priv = netdev_priv(dev);
+ struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+ mscan_set_mode(dev, MSCAN_INIT_MODE);
+ out_8(&regs->canctl1, in_8(&regs->canctl1) & ~MSCAN_CANE);
+ unregister_candev(dev);
+}
+EXPORT_SYMBOL_GPL(unregister_mscandev);
+
+struct net_device *alloc_mscandev(void)
+{
+ struct net_device *dev;
+ struct mscan_priv *priv;
+ int i;
+
+ dev = alloc_candev(sizeof(struct mscan_priv), MSCAN_ECHO_SKB_MAX);
+ if (!dev)
+ return NULL;
+ priv = netdev_priv(dev);
+
+ dev->netdev_ops = &mscan_netdev_ops;
+
+ dev->flags |= IFF_ECHO; /* we support local echo */
+
+ netif_napi_add(dev, &priv->napi, mscan_rx_poll, 8);
+
+ priv->can.bittiming_const = &mscan_bittiming_const;
+ priv->can.do_set_bittiming = mscan_do_set_bittiming;
+ priv->can.do_set_mode = mscan_do_set_mode;
+
+ for (i = 0; i < TX_QUEUE_SIZE; i++) {
+ priv->tx_queue[i].id = i;
+ priv->tx_queue[i].mask = 1 << i;
+ }
+
+ return dev;
+}
+EXPORT_SYMBOL_GPL(alloc_mscandev);
+
+MODULE_AUTHOR("Andrey Volkov <avolkov@varma-el.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("CAN port driver for a MSCAN based chips");
diff --git a/drivers/net/can/mscan/mscan.h b/drivers/net/can/mscan/mscan.h
new file mode 100644
index 00000000000..57820f5fb81
--- /dev/null
+++ b/drivers/net/can/mscan/mscan.h
@@ -0,0 +1,262 @@
+/*
+ * Definitions of consts/structs to drive the Freescale MSCAN.
+ *
+ * Copyright (C) 2005-2006 Andrey Volkov <avolkov@varma-el.com>,
+ * Varma Electronics Oy
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __MSCAN_H__
+#define __MSCAN_H__
+
+#include <linux/types.h>
+
+/* MSCAN control register 0 (CANCTL0) bits */
+#define MSCAN_RXFRM 0x80
+#define MSCAN_RXACT 0x40
+#define MSCAN_CSWAI 0x20
+#define MSCAN_SYNCH 0x10
+#define MSCAN_TIME 0x08
+#define MSCAN_WUPE 0x04
+#define MSCAN_SLPRQ 0x02
+#define MSCAN_INITRQ 0x01
+
+/* MSCAN control register 1 (CANCTL1) bits */
+#define MSCAN_CANE 0x80
+#define MSCAN_CLKSRC 0x40
+#define MSCAN_LOOPB 0x20
+#define MSCAN_LISTEN 0x10
+#define MSCAN_WUPM 0x04
+#define MSCAN_SLPAK 0x02
+#define MSCAN_INITAK 0x01
+
+/* Use the MPC5200 MSCAN variant? */
+#ifdef CONFIG_PPC
+#define MSCAN_FOR_MPC5200
+#endif
+
+#ifdef MSCAN_FOR_MPC5200
+#define MSCAN_CLKSRC_BUS 0
+#define MSCAN_CLKSRC_XTAL MSCAN_CLKSRC
+#else
+#define MSCAN_CLKSRC_BUS MSCAN_CLKSRC
+#define MSCAN_CLKSRC_XTAL 0
+#endif
+
+/* MSCAN receiver flag register (CANRFLG) bits */
+#define MSCAN_WUPIF 0x80
+#define MSCAN_CSCIF 0x40
+#define MSCAN_RSTAT1 0x20
+#define MSCAN_RSTAT0 0x10
+#define MSCAN_TSTAT1 0x08
+#define MSCAN_TSTAT0 0x04
+#define MSCAN_OVRIF 0x02
+#define MSCAN_RXF 0x01
+#define MSCAN_ERR_IF (MSCAN_OVRIF | MSCAN_CSCIF)
+#define MSCAN_RSTAT_MSK (MSCAN_RSTAT1 | MSCAN_RSTAT0)
+#define MSCAN_TSTAT_MSK (MSCAN_TSTAT1 | MSCAN_TSTAT0)
+#define MSCAN_STAT_MSK (MSCAN_RSTAT_MSK | MSCAN_TSTAT_MSK)
+
+#define MSCAN_STATE_BUS_OFF (MSCAN_RSTAT1 | MSCAN_RSTAT0 | \
+ MSCAN_TSTAT1 | MSCAN_TSTAT0)
+#define MSCAN_STATE_TX(canrflg) (((canrflg)&MSCAN_TSTAT_MSK)>>2)
+#define MSCAN_STATE_RX(canrflg) (((canrflg)&MSCAN_RSTAT_MSK)>>4)
+#define MSCAN_STATE_ACTIVE 0
+#define MSCAN_STATE_WARNING 1
+#define MSCAN_STATE_PASSIVE 2
+#define MSCAN_STATE_BUSOFF 3
+
+/* MSCAN receiver interrupt enable register (CANRIER) bits */
+#define MSCAN_WUPIE 0x80
+#define MSCAN_CSCIE 0x40
+#define MSCAN_RSTATE1 0x20
+#define MSCAN_RSTATE0 0x10
+#define MSCAN_TSTATE1 0x08
+#define MSCAN_TSTATE0 0x04
+#define MSCAN_OVRIE 0x02
+#define MSCAN_RXFIE 0x01
+
+/* MSCAN transmitter flag register (CANTFLG) bits */
+#define MSCAN_TXE2 0x04
+#define MSCAN_TXE1 0x02
+#define MSCAN_TXE0 0x01
+#define MSCAN_TXE (MSCAN_TXE2 | MSCAN_TXE1 | MSCAN_TXE0)
+
+/* MSCAN transmitter interrupt enable register (CANTIER) bits */
+#define MSCAN_TXIE2 0x04
+#define MSCAN_TXIE1 0x02
+#define MSCAN_TXIE0 0x01
+#define MSCAN_TXIE (MSCAN_TXIE2 | MSCAN_TXIE1 | MSCAN_TXIE0)
+
+/* MSCAN transmitter message abort request (CANTARQ) bits */
+#define MSCAN_ABTRQ2 0x04
+#define MSCAN_ABTRQ1 0x02
+#define MSCAN_ABTRQ0 0x01
+
+/* MSCAN transmitter message abort ack (CANTAAK) bits */
+#define MSCAN_ABTAK2 0x04
+#define MSCAN_ABTAK1 0x02
+#define MSCAN_ABTAK0 0x01
+
+/* MSCAN transmit buffer selection (CANTBSEL) bits */
+#define MSCAN_TX2 0x04
+#define MSCAN_TX1 0x02
+#define MSCAN_TX0 0x01
+
+/* MSCAN ID acceptance control register (CANIDAC) bits */
+#define MSCAN_IDAM1 0x20
+#define MSCAN_IDAM0 0x10
+#define MSCAN_IDHIT2 0x04
+#define MSCAN_IDHIT1 0x02
+#define MSCAN_IDHIT0 0x01
+
+#define MSCAN_AF_32BIT 0x00
+#define MSCAN_AF_16BIT MSCAN_IDAM0
+#define MSCAN_AF_8BIT MSCAN_IDAM1
+#define MSCAN_AF_CLOSED (MSCAN_IDAM0|MSCAN_IDAM1)
+#define MSCAN_AF_MASK (~(MSCAN_IDAM0|MSCAN_IDAM1))
+
+/* MSCAN Miscellaneous Register (CANMISC) bits */
+#define MSCAN_BOHOLD 0x01
+
+#ifdef MSCAN_FOR_MPC5200
+#define _MSCAN_RESERVED_(n, num) u8 _res##n[num]
+#define _MSCAN_RESERVED_DSR_SIZE 2
+#else
+#define _MSCAN_RESERVED_(n, num)
+#define _MSCAN_RESERVED_DSR_SIZE 0
+#endif
+
+/* Structure of the hardware registers */
+struct mscan_regs {
+ /* (see doc S12MSCANV3/D) MPC5200 MSCAN */
+ u8 canctl0; /* + 0x00 0x00 */
+ u8 canctl1; /* + 0x01 0x01 */
+ _MSCAN_RESERVED_(1, 2); /* + 0x02 */
+ u8 canbtr0; /* + 0x04 0x02 */
+ u8 canbtr1; /* + 0x05 0x03 */
+ _MSCAN_RESERVED_(2, 2); /* + 0x06 */
+ u8 canrflg; /* + 0x08 0x04 */
+ u8 canrier; /* + 0x09 0x05 */
+ _MSCAN_RESERVED_(3, 2); /* + 0x0a */
+ u8 cantflg; /* + 0x0c 0x06 */
+ u8 cantier; /* + 0x0d 0x07 */
+ _MSCAN_RESERVED_(4, 2); /* + 0x0e */
+ u8 cantarq; /* + 0x10 0x08 */
+ u8 cantaak; /* + 0x11 0x09 */
+ _MSCAN_RESERVED_(5, 2); /* + 0x12 */
+ u8 cantbsel; /* + 0x14 0x0a */
+ u8 canidac; /* + 0x15 0x0b */
+ u8 reserved; /* + 0x16 0x0c */
+ _MSCAN_RESERVED_(6, 5); /* + 0x17 */
+#ifndef MSCAN_FOR_MPC5200
+ u8 canmisc; /* 0x0d */
+#endif
+ u8 canrxerr; /* + 0x1c 0x0e */
+ u8 cantxerr; /* + 0x1d 0x0f */
+ _MSCAN_RESERVED_(7, 2); /* + 0x1e */
+ u16 canidar1_0; /* + 0x20 0x10 */
+ _MSCAN_RESERVED_(8, 2); /* + 0x22 */
+ u16 canidar3_2; /* + 0x24 0x12 */
+ _MSCAN_RESERVED_(9, 2); /* + 0x26 */
+ u16 canidmr1_0; /* + 0x28 0x14 */
+ _MSCAN_RESERVED_(10, 2); /* + 0x2a */
+ u16 canidmr3_2; /* + 0x2c 0x16 */
+ _MSCAN_RESERVED_(11, 2); /* + 0x2e */
+ u16 canidar5_4; /* + 0x30 0x18 */
+ _MSCAN_RESERVED_(12, 2); /* + 0x32 */
+ u16 canidar7_6; /* + 0x34 0x1a */
+ _MSCAN_RESERVED_(13, 2); /* + 0x36 */
+ u16 canidmr5_4; /* + 0x38 0x1c */
+ _MSCAN_RESERVED_(14, 2); /* + 0x3a */
+ u16 canidmr7_6; /* + 0x3c 0x1e */
+ _MSCAN_RESERVED_(15, 2); /* + 0x3e */
+ struct {
+ u16 idr1_0; /* + 0x40 0x20 */
+ _MSCAN_RESERVED_(16, 2); /* + 0x42 */
+ u16 idr3_2; /* + 0x44 0x22 */
+ _MSCAN_RESERVED_(17, 2); /* + 0x46 */
+ u16 dsr1_0; /* + 0x48 0x24 */
+ _MSCAN_RESERVED_(18, 2); /* + 0x4a */
+ u16 dsr3_2; /* + 0x4c 0x26 */
+ _MSCAN_RESERVED_(19, 2); /* + 0x4e */
+ u16 dsr5_4; /* + 0x50 0x28 */
+ _MSCAN_RESERVED_(20, 2); /* + 0x52 */
+ u16 dsr7_6; /* + 0x54 0x2a */
+ _MSCAN_RESERVED_(21, 2); /* + 0x56 */
+ u8 dlr; /* + 0x58 0x2c */
+ u8:8; /* + 0x59 0x2d */
+ _MSCAN_RESERVED_(22, 2); /* + 0x5a */
+ u16 time; /* + 0x5c 0x2e */
+ } rx;
+ _MSCAN_RESERVED_(23, 2); /* + 0x5e */
+ struct {
+ u16 idr1_0; /* + 0x60 0x30 */
+ _MSCAN_RESERVED_(24, 2); /* + 0x62 */
+ u16 idr3_2; /* + 0x64 0x32 */
+ _MSCAN_RESERVED_(25, 2); /* + 0x66 */
+ u16 dsr1_0; /* + 0x68 0x34 */
+ _MSCAN_RESERVED_(26, 2); /* + 0x6a */
+ u16 dsr3_2; /* + 0x6c 0x36 */
+ _MSCAN_RESERVED_(27, 2); /* + 0x6e */
+ u16 dsr5_4; /* + 0x70 0x38 */
+ _MSCAN_RESERVED_(28, 2); /* + 0x72 */
+ u16 dsr7_6; /* + 0x74 0x3a */
+ _MSCAN_RESERVED_(29, 2); /* + 0x76 */
+ u8 dlr; /* + 0x78 0x3c */
+ u8 tbpr; /* + 0x79 0x3d */
+ _MSCAN_RESERVED_(30, 2); /* + 0x7a */
+ u16 time; /* + 0x7c 0x3e */
+ } tx;
+ _MSCAN_RESERVED_(31, 2); /* + 0x7e */
+} __attribute__ ((packed));
+
+#undef _MSCAN_RESERVED_
+#define MSCAN_REGION sizeof(struct mscan)
+
+#define TX_QUEUE_SIZE 3
+
+struct tx_queue_entry {
+ struct list_head list;
+ u8 mask;
+ u8 id;
+};
+
+struct mscan_priv {
+ struct can_priv can; /* must be the first member */
+ long open_time;
+ unsigned long flags;
+ void __iomem *reg_base; /* ioremap'ed address to registers */
+ u8 shadow_statflg;
+ u8 shadow_canrier;
+ u8 cur_pri;
+ u8 prev_buf_id;
+ u8 tx_active;
+
+ struct list_head tx_head;
+ struct tx_queue_entry tx_queue[TX_QUEUE_SIZE];
+ struct napi_struct napi;
+};
+
+struct net_device *alloc_mscandev(void);
+/*
+ * clock_src:
+ * 1 = The MSCAN clock source is the onchip Bus Clock.
+ * 0 = The MSCAN clock source is the chip Oscillator Clock.
+ */
+extern int register_mscandev(struct net_device *dev, int clock_src);
+extern void unregister_mscandev(struct net_device *dev);
+
+#endif /* __MSCAN_H__ */