Merge tag 'mmc-updates-for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.13:

  Core:
   - Improve runtime PM support, remove mmc_{suspend,resume}_host().
   - Add MMC_CAP_RUNTIME_RESUME, for delaying MMC resume until we're
     outside of the resume sequence (in runtime_resume) to decrease
     system resume time.

  Drivers:
   - dw_mmc: Support HS200 mode.
   - sdhci-eshdc-imx: Support SD3.0 SDR clock tuning, DDR on IMX6.
   - sdhci-pci: Add support for Intel Clovertrail and Merrifield"

* tag 'mmc-updates-for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (108 commits)
  mmc: wbsd: Silence compiler warning
  mmc: core: Silence compiler warning in __mmc_switch
  mmc: sh_mmcif: Convert to clk_prepare|unprepare
  mmc: sh_mmcif: Convert to PM macros when defining dev_pm_ops
  mmc: dw_mmc: exynos: Revert the sdr_timing assignment
  mmc: sdhci: Avoid needless loop while handling SDIO interrupts in sdhci_irq
  mmc: core: Add MMC_CAP_RUNTIME_RESUME to resume at runtime_resume
  mmc: core: Improve runtime PM support during suspend/resume for sd/mmc
  mmc: core: Remove redundant mmc_power_up|off at runtime callbacks
  mmc: Don't force card to active state when entering suspend/shutdown
  MIPS: db1235: Don't use MMC_CLKGATE
  mmc: core: Remove deprecated mmc_suspend|resume_host APIs
  mmc: mmci: Move away from using deprecated APIs
  mmc: via-sdmmc: Move away from using deprecated APIs
  mmc: tmio: Move away from using deprecated APIs
  mmc: sh_mmcif: Move away from using deprecated APIs
  mmc: sdricoh_cs: Move away from using deprecated APIs
  mmc: rtsx: Remove redundant suspend and resume callbacks
  mmc: wbsd: Move away from using deprecated APIs
  mmc: pxamci: Remove redundant suspend and resume callbacks
  ...

45 files changed, 1786 insertions, 1231 deletions

diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 1a3163f1407..29d5d988a51 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -2448,7 +2448,6 @@ static int _mmc_blk_suspend(struct mmc_card *card)
 	struct mmc_blk_data *md = mmc_get_drvdata(card);
 
 	if (md) {
-		pm_runtime_get_sync(&card->dev);
 		mmc_queue_suspend(&md->queue);
 		list_for_each_entry(part_md, &md->part, part) {
 			mmc_queue_suspend(&part_md->queue);
@@ -2483,7 +2482,6 @@ static int mmc_blk_resume(struct mmc_card *card)
 		list_for_each_entry(part_md, &md->part, part) {
 			mmc_queue_resume(&part_md->queue);
 		}
-		pm_runtime_put(&card->dev);
 	}
 	return 0;
 }
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 3e227bd91e8..64145a32b91 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -342,7 +342,7 @@ int mmc_add_card(struct mmc_card *card)
 		break;
 	}
 
-	if (mmc_sd_card_uhs(card) &&
+	if (mmc_card_uhs(card) &&
 		(card->sd_bus_speed < ARRAY_SIZE(uhs_speeds)))
 		uhs_bus_speed_mode = uhs_speeds[card->sd_bus_speed];
 
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index bf18b6bfce4..57a2b403bf8 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -23,6 +23,7 @@
 #include <linux/log2.h>
 #include <linux/regulator/consumer.h>
 #include <linux/pm_runtime.h>
+#include <linux/pm_wakeup.h>
 #include <linux/suspend.h>
 #include <linux/fault-inject.h>
 #include <linux/random.h>
@@ -301,7 +302,7 @@ void mmc_start_bkops(struct mmc_card *card, bool from_exception)
 	}
 
 	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-			EXT_CSD_BKOPS_START, 1, timeout, use_busy_signal);
+			EXT_CSD_BKOPS_START, 1, timeout, use_busy_signal, true);
 	if (err) {
 		pr_warn("%s: Error %d starting bkops\n",
 			mmc_hostname(card->host), err);
@@ -918,31 +919,6 @@ int __mmc_claim_host(struct mmc_host *host, atomic_t *abort)
 EXPORT_SYMBOL(__mmc_claim_host);
 
 /**
- *	mmc_try_claim_host - try exclusively to claim a host
- *	@host: mmc host to claim
- *
- *	Returns %1 if the host is claimed, %0 otherwise.
- */
-int mmc_try_claim_host(struct mmc_host *host)
-{
-	int claimed_host = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&host->lock, flags);
-	if (!host->claimed || host->claimer == current) {
-		host->claimed = 1;
-		host->claimer = current;
-		host->claim_cnt += 1;
-		claimed_host = 1;
-	}
-	spin_unlock_irqrestore(&host->lock, flags);
-	if (host->ops->enable && claimed_host && host->claim_cnt == 1)
-		host->ops->enable(host);
-	return claimed_host;
-}
-EXPORT_SYMBOL(mmc_try_claim_host);
-
-/**
  *	mmc_release_host - release a host
  *	@host: mmc host to release
  *
@@ -1382,22 +1358,31 @@ u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
 {
 	int bit;
 
-	ocr &= host->ocr_avail;
+	/*
+	 * Sanity check the voltages that the card claims to
+	 * support.
+	 */
+	if (ocr & 0x7F) {
+		dev_warn(mmc_dev(host),
+		"card claims to support voltages below defined range\n");
+		ocr &= ~0x7F;
+	}
 
-	bit = ffs(ocr);
-	if (bit) {
-		bit -= 1;
+	ocr &= host->ocr_avail;
+	if (!ocr) {
+		dev_warn(mmc_dev(host), "no support for card's volts\n");
+		return 0;
+	}
 
+	if (host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) {
+		bit = ffs(ocr) - 1;
 		ocr &= 3 << bit;
-
-		mmc_host_clk_hold(host);
-		host->ios.vdd = bit;
-		mmc_set_ios(host);
-		mmc_host_clk_release(host);
+		mmc_power_cycle(host, ocr);
 	} else {
-		pr_warning("%s: host doesn't support card's voltages\n",
-				mmc_hostname(host));
-		ocr = 0;
+		bit = fls(ocr) - 1;
+		ocr &= 3 << bit;
+		if (bit != host->ios.vdd)
+			dev_warn(mmc_dev(host), "exceeding card's volts\n");
 	}
 
 	return ocr;
@@ -1422,7 +1407,7 @@ int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage)
 
 }
 
-int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage)
+int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr)
 {
 	struct mmc_command cmd = {0};
 	int err = 0;
@@ -1504,7 +1489,7 @@ power_cycle:
 	if (err) {
 		pr_debug("%s: Signal voltage switch failed, "
 			"power cycling card\n", mmc_hostname(host));
-		mmc_power_cycle(host);
+		mmc_power_cycle(host, ocr);
 	}
 
 	mmc_host_clk_release(host);
@@ -1545,22 +1530,14 @@ void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type)
  * If a host does all the power sequencing itself, ignore the
  * initial MMC_POWER_UP stage.
  */
-void mmc_power_up(struct mmc_host *host)
+void mmc_power_up(struct mmc_host *host, u32 ocr)
 {
-	int bit;
-
 	if (host->ios.power_mode == MMC_POWER_ON)
 		return;
 
 	mmc_host_clk_hold(host);
 
-	/* If ocr is set, we use it */
-	if (host->ocr)
-		bit = ffs(host->ocr) - 1;
-	else
-		bit = fls(host->ocr_avail) - 1;
-
-	host->ios.vdd = bit;
+	host->ios.vdd = fls(ocr) - 1;
 	if (mmc_host_is_spi(host))
 		host->ios.chip_select = MMC_CS_HIGH;
 	else
@@ -1604,13 +1581,6 @@ void mmc_power_off(struct mmc_host *host)
 	host->ios.clock = 0;
 	host->ios.vdd = 0;
 
-
-	/*
-	 * Reset ocr mask to be the highest possible voltage supported for
-	 * this mmc host. This value will be used at next power up.
-	 */
-	host->ocr = 1 << (fls(host->ocr_avail) - 1);
-
 	if (!mmc_host_is_spi(host)) {
 		host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
 		host->ios.chip_select = MMC_CS_DONTCARE;
@@ -1630,12 +1600,12 @@ void mmc_power_off(struct mmc_host *host)
 	mmc_host_clk_release(host);
 }
 
-void mmc_power_cycle(struct mmc_host *host)
+void mmc_power_cycle(struct mmc_host *host, u32 ocr)
 {
 	mmc_power_off(host);
 	/* Wait at least 1 ms according to SD spec */
 	mmc_delay(1);
-	mmc_power_up(host);
+	mmc_power_up(host, ocr);
 }
 
 /*
@@ -1723,6 +1693,28 @@ void mmc_detach_bus(struct mmc_host *host)
 	mmc_bus_put(host);
 }
 
+static void _mmc_detect_change(struct mmc_host *host, unsigned long delay,
+				bool cd_irq)
+{
+#ifdef CONFIG_MMC_DEBUG
+	unsigned long flags;
+	spin_lock_irqsave(&host->lock, flags);
+	WARN_ON(host->removed);
+	spin_unlock_irqrestore(&host->lock, flags);
+#endif
+
+	/*
+	 * If the device is configured as wakeup, we prevent a new sleep for
+	 * 5 s to give provision for user space to consume the event.
+	 */
+	if (cd_irq && !(host->caps & MMC_CAP_NEEDS_POLL) &&
+		device_can_wakeup(mmc_dev(host)))
+		pm_wakeup_event(mmc_dev(host), 5000);
+
+	host->detect_change = 1;
+	mmc_schedule_delayed_work(&host->detect, delay);
+}
+
 /**
  *	mmc_detect_change - process change of state on a MMC socket
  *	@host: host which changed state.
@@ -1735,16 +1727,8 @@ void mmc_detach_bus(struct mmc_host *host)
  */
 void mmc_detect_change(struct mmc_host *host, unsigned long delay)
 {
-#ifdef CONFIG_MMC_DEBUG
-	unsigned long flags;
-	spin_lock_irqsave(&host->lock, flags);
-	WARN_ON(host->removed);
-	spin_unlock_irqrestore(&host->lock, flags);
-#endif
-	host->detect_change = 1;
-	mmc_schedule_delayed_work(&host->detect, delay);
+	_mmc_detect_change(host, delay, true);
 }
-
 EXPORT_SYMBOL(mmc_detect_change);
 
 void mmc_init_erase(struct mmc_card *card)
@@ -2334,7 +2318,7 @@ static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq)
 	pr_info("%s: %s: trying to init card at %u Hz\n",
 		mmc_hostname(host), __func__, host->f_init);
 #endif
-	mmc_power_up(host);
+	mmc_power_up(host, host->ocr_avail);
 
 	/*
 	 * Some eMMCs (with VCCQ always on) may not be reset after power up, so
@@ -2423,7 +2407,7 @@ int mmc_detect_card_removed(struct mmc_host *host)
 			 * rescan handle the card removal.
 			 */
 			cancel_delayed_work(&host->detect);
-			mmc_detect_change(host, 0);
+			_mmc_detect_change(host, 0, false);
 		}
 	}
 
@@ -2504,8 +2488,8 @@ void mmc_start_host(struct mmc_host *host)
 	if (host->caps2 & MMC_CAP2_NO_PRESCAN_POWERUP)
 		mmc_power_off(host);
 	else
-		mmc_power_up(host);
-	mmc_detect_change(host, 0);
+		mmc_power_up(host, host->ocr_avail);
+	_mmc_detect_change(host, 0, false);
 }
 
 void mmc_stop_host(struct mmc_host *host)
@@ -2583,7 +2567,7 @@ int mmc_power_restore_host(struct mmc_host *host)
 		return -EINVAL;
 	}
 
-	mmc_power_up(host);
+	mmc_power_up(host, host->card->ocr);
 	ret = host->bus_ops->power_restore(host);
 
 	mmc_bus_put(host);
@@ -2657,28 +2641,6 @@ EXPORT_SYMBOL(mmc_cache_ctrl);
 
 #ifdef CONFIG_PM
 
-/**
- *	mmc_suspend_host - suspend a host
- *	@host: mmc host
- */
-int mmc_suspend_host(struct mmc_host *host)
-{
-	/* This function is deprecated */
-	return 0;
-}
-EXPORT_SYMBOL(mmc_suspend_host);
-
-/**
- *	mmc_resume_host - resume a previously suspended host
- *	@host: mmc host
- */
-int mmc_resume_host(struct mmc_host *host)
-{
-	/* This function is deprecated */
-	return 0;
-}
-EXPORT_SYMBOL(mmc_resume_host);
-
 /* Do the card removal on suspend if card is assumed removeable
  * Do that in pm notifier while userspace isn't yet frozen, so we will be able
    to sync the card.
@@ -2724,7 +2686,7 @@ int mmc_pm_notify(struct notifier_block *notify_block,
 		spin_lock_irqsave(&host->lock, flags);
 		host->rescan_disable = 0;
 		spin_unlock_irqrestore(&host->lock, flags);
-		mmc_detect_change(host, 0);
+		_mmc_detect_change(host, 0, false);
 
 	}
 
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index 5345d156493..443a584660f 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -42,13 +42,13 @@ void mmc_set_ungated(struct mmc_host *host);
 void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode);
 void mmc_set_bus_width(struct mmc_host *host, unsigned int width);
 u32 mmc_select_voltage(struct mmc_host *host, u32 ocr);
-int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage);
+int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr);
 int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage);
 void mmc_set_timing(struct mmc_host *host, unsigned int timing);
 void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type);
-void mmc_power_up(struct mmc_host *host);
+void mmc_power_up(struct mmc_host *host, u32 ocr);
 void mmc_power_off(struct mmc_host *host);
-void mmc_power_cycle(struct mmc_host *host);
+void mmc_power_cycle(struct mmc_host *host, u32 ocr);
 
 static inline void mmc_delay(unsigned int ms)
 {
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 6d02012a1d0..f631f5a9bf7 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -13,6 +13,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/stat.h>
+#include <linux/pm_runtime.h>
 
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
@@ -934,6 +935,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 			goto err;
 		}
 
+		card->ocr = ocr;
 		card->type = MMC_TYPE_MMC;
 		card->rca = 1;
 		memcpy(card->raw_cid, cid, sizeof(card->raw_cid));
@@ -1404,9 +1406,9 @@ static int mmc_poweroff_notify(struct mmc_card *card, unsigned int notify_type)
 	if (notify_type == EXT_CSD_POWER_OFF_LONG)
 		timeout = card->ext_csd.power_off_longtime;
 
-	err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-			 EXT_CSD_POWER_OFF_NOTIFICATION,
-			 notify_type, timeout);
+	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+			EXT_CSD_POWER_OFF_NOTIFICATION,
+			notify_type, timeout, true, false);
 	if (err)
 		pr_err("%s: Power Off Notification timed out, %u\n",
 		       mmc_hostname(card->host), timeout);
@@ -1477,6 +1479,9 @@ static int _mmc_suspend(struct mmc_host *host, bool is_suspend)
 
 	mmc_claim_host(host);
 
+	if (mmc_card_suspended(host->card))
+		goto out;
+
 	if (mmc_card_doing_bkops(host->card)) {
 		err = mmc_stop_bkops(host->card);
 		if (err)
@@ -1496,51 +1501,93 @@ static int _mmc_suspend(struct mmc_host *host, bool is_suspend)
 		err = mmc_deselect_cards(host);
 	host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
 
-	if (!err)
+	if (!err) {
 		mmc_power_off(host);
+		mmc_card_set_suspended(host->card);
+	}
 out:
 	mmc_release_host(host);
 	return err;
 }
 
 /*
- * Suspend callback from host.
+ * Suspend callback
  */
 static int mmc_suspend(struct mmc_host *host)
 {
-	return _mmc_suspend(host, true);
-}
+	int err;
 
-/*
- * Shutdown callback
- */
-static int mmc_shutdown(struct mmc_host *host)
-{
-	return _mmc_suspend(host, false);
+	err = _mmc_suspend(host, true);
+	if (!err) {
+		pm_runtime_disable(&host->card->dev);
+		pm_runtime_set_suspended(&host->card->dev);
+	}
+
+	return err;
 }
 
 /*
- * Resume callback from host.
- *
  * This function tries to determine if the same card is still present
  * and, if so, restore all state to it.
  */
-static int mmc_resume(struct mmc_host *host)
+static int _mmc_resume(struct mmc_host *host)
 {
-	int err;
+	int err = 0;
 
 	BUG_ON(!host);
 	BUG_ON(!host->card);
 
 	mmc_claim_host(host);
-	mmc_power_up(host);
-	mmc_select_voltage(host, host->ocr);
-	err = mmc_init_card(host, host->ocr, host->card);
+
+	if (!mmc_card_suspended(host->card))
+		goto out;
+
+	mmc_power_up(host, host->card->ocr);
+	err = mmc_init_card(host, host->card->ocr, host->card);
+	mmc_card_clr_suspended(host->card);
+
+out:
 	mmc_release_host(host);
+	return err;
+}
+
+/*
+ * Shutdown callback
+ */
+static int mmc_shutdown(struct mmc_host *host)
+{
+	int err = 0;
+
+	/*
+	 * In a specific case for poweroff notify, we need to resume the card
+	 * before we can shutdown it properly.
+	 */
+	if (mmc_can_poweroff_notify(host->card) &&
+		!(host->caps2 & MMC_CAP2_FULL_PWR_CYCLE))
+		err = _mmc_resume(host);
+
+	if (!err)
+		err = _mmc_suspend(host, false);
 
 	return err;
 }
 
+/*
+ * Callback for resume.
+ */
+static int mmc_resume(struct mmc_host *host)
+{
+	int err = 0;
+
+	if (!(host->caps & MMC_CAP_RUNTIME_RESUME)) {
+		err = _mmc_resume(host);
+		pm_runtime_set_active(&host->card->dev);
+		pm_runtime_mark_last_busy(&host->card->dev);
+	}
+	pm_runtime_enable(&host->card->dev);
+
+	return err;
+}
 
 /*
  * Callback for runtime_suspend.
@@ -1552,18 +1599,11 @@ static int mmc_runtime_suspend(struct mmc_host *host)
 	if (!(host->caps & MMC_CAP_AGGRESSIVE_PM))
 		return 0;
 
-	mmc_claim_host(host);
-
-	err = mmc_suspend(host);
-	if (err) {
+	err = _mmc_suspend(host, true);
+	if (err)
 		pr_err("%s: error %d doing aggessive suspend\n",
 			mmc_hostname(host), err);
-		goto out;
-	}
-	mmc_power_off(host);
 
-out:
-	mmc_release_host(host);
 	return err;
 }
 
@@ -1574,18 +1614,14 @@ static int mmc_runtime_resume(struct mmc_host *host)
 {
 	int err;
 
-	if (!(host->caps & MMC_CAP_AGGRESSIVE_PM))
+	if (!(host->caps & (MMC_CAP_AGGRESSIVE_PM | MMC_CAP_RUNTIME_RESUME)))
 		return 0;
 
-	mmc_claim_host(host);
-
-	mmc_power_up(host);
-	err = mmc_resume(host);
+	err = _mmc_resume(host);
 	if (err)
 		pr_err("%s: error %d doing aggessive resume\n",
 			mmc_hostname(host), err);
 
-	mmc_release_host(host);
 	return 0;
 }
 
@@ -1595,7 +1631,7 @@ static int mmc_power_restore(struct mmc_host *host)
 
 	host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
 	mmc_claim_host(host);
-	ret = mmc_init_card(host, host->ocr, host->card);
+	ret = mmc_init_card(host, host->card->ocr, host->card);
 	mmc_release_host(host);
 
 	return ret;
@@ -1640,7 +1676,7 @@ static void mmc_attach_bus_ops(struct mmc_host *host)
 int mmc_attach_mmc(struct mmc_host *host)
 {
 	int err;
-	u32 ocr;
+	u32 ocr, rocr;
 
 	BUG_ON(!host);
 	WARN_ON(!host->claimed);
@@ -1666,23 +1702,12 @@ int mmc_attach_mmc(struct mmc_host *host)
 			goto err;
 	}
 
-	/*
-	 * Sanity check the voltages that the card claims to
-	 * support.
-	 */
-	if (ocr & 0x7F) {
-		pr_warning("%s: card claims to support voltages "
-		       "below the defined range. These will be ignored.\n",
-		       mmc_hostname(host));
-		ocr &= ~0x7F;
-	}
-
-	host->ocr = mmc_select_voltage(host, ocr);
+	rocr = mmc_select_voltage(host, ocr);
 
 	/*
 	 * Can we support the voltage of the card?
 	 */
-	if (!host->ocr) {
+	if (!rocr) {
 		err = -EINVAL;
 		goto err;
 	}
@@ -1690,7 +1715,7 @@ int mmc_attach_mmc(struct mmc_host *host)
 	/*
 	 * Detect and init the card.
 	 */
-	err = mmc_init_card(host, host->ocr, NULL);
+	err = mmc_init_card(host, rocr, NULL);
 	if (err)
 		goto err;
 
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index ef183483d5b..e5b5eeb548d 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -23,6 +23,40 @@
 
 #define MMC_OPS_TIMEOUT_MS	(10 * 60 * 1000) /* 10 minute timeout */
 
+static inline int __mmc_send_status(struct mmc_card *card, u32 *status,
+				    bool ignore_crc)
+{
+	int err;
+	struct mmc_command cmd = {0};
+
+	BUG_ON(!card);
+	BUG_ON(!card->host);
+
+	cmd.opcode = MMC_SEND_STATUS;
+	if (!mmc_host_is_spi(card->host))
+		cmd.arg = card->rca << 16;
+	cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
+	if (ignore_crc)
+		cmd.flags &= ~MMC_RSP_CRC;
+
+	err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
+	if (err)
+		return err;
+
+	/* NOTE: callers are required to understand the difference
+	 * between "native" and SPI format status words!
+	 */
+	if (status)
+		*status = cmd.resp[0];
+
+	return 0;
+}
+
+int mmc_send_status(struct mmc_card *card, u32 *status)
+{
+	return __mmc_send_status(card, status, false);
+}
+
 static int _mmc_select_card(struct mmc_host *host, struct mmc_card *card)
 {
 	int err;
@@ -370,16 +404,18 @@ int mmc_spi_set_crc(struct mmc_host *host, int use_crc)
  *	@timeout_ms: timeout (ms) for operation performed by register write,
  *                   timeout of zero implies maximum possible timeout
  *	@use_busy_signal: use the busy signal as response type
+ *	@send_status: send status cmd to poll for busy
  *
  *	Modifies the EXT_CSD register for selected card.
  */
 int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
-	       unsigned int timeout_ms, bool use_busy_signal)
+		unsigned int timeout_ms, bool use_busy_signal, bool send_status)
 {
 	int err;
 	struct mmc_command cmd = {0};
 	unsigned long timeout;
-	u32 status;
+	u32 status = 0;
+	bool ignore_crc = false;
 
 	BUG_ON(!card);
 	BUG_ON(!card->host);
@@ -408,17 +444,37 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 	if (!use_busy_signal)
 		return 0;
 
-	/* Must check status to be sure of no errors */
+	/*
+	 * Must check status to be sure of no errors
+	 * If CMD13 is to check the busy completion of the timing change,
+	 * disable the check of CRC error.
+	 */
+	if (index == EXT_CSD_HS_TIMING &&
+	    !(card->host->caps & MMC_CAP_WAIT_WHILE_BUSY))
+		ignore_crc = true;
+
 	timeout = jiffies + msecs_to_jiffies(MMC_OPS_TIMEOUT_MS);
 	do {
-		err = mmc_send_status(card, &status);
-		if (err)
-			return err;
+		if (send_status) {
+			err = __mmc_send_status(card, &status, ignore_crc);
+			if (err)
+				return err;
+		}
 		if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
 			break;
 		if (mmc_host_is_spi(card->host))
 			break;
 
+		/*
+		 * We are not allowed to issue a status command and the host
+		 * does'nt support MMC_CAP_WAIT_WHILE_BUSY, then we can only
+		 * rely on waiting for the stated timeout to be sufficient.
+		 */
+		if (!send_status) {
+			mmc_delay(timeout_ms);
+			return 0;
+		}
+
 		/* Timeout if the device never leaves the program state. */
 		if (time_after(jiffies, timeout)) {
 			pr_err("%s: Card stuck in programming state! %s\n",
@@ -445,36 +501,10 @@ EXPORT_SYMBOL_GPL(__mmc_switch);
 int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 		unsigned int timeout_ms)
 {
-	return __mmc_switch(card, set, index, value, timeout_ms, true);
+	return __mmc_switch(card, set, index, value, timeout_ms, true, true);
 }
 EXPORT_SYMBOL_GPL(mmc_switch);
 
-int mmc_send_status(struct mmc_card *card, u32 *status)
-{
-	int err;
-	struct mmc_command cmd = {0};
-
-	BUG_ON(!card);
-	BUG_ON(!card->host);
-
-	cmd.opcode = MMC_SEND_STATUS;
-	if (!mmc_host_is_spi(card->host))
-		cmd.arg = card->rca << 16;
-	cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
-
-	err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
-	if (err)
-		return err;
-
-	/* NOTE: callers are required to understand the difference
-	 * between "native" and SPI format status words!
-	 */
-	if (status)
-		*status = cmd.resp[0];
-
-	return 0;
-}
-
 static int
 mmc_send_bus_test(struct mmc_card *card, struct mmc_host *host, u8 opcode,
 		  u8 len)
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 5e8823dc3ef..6f42050b7cc 100644
-