diff options
| author | John W. Linville <linville@tuxdriver.com> | 2010-03-31 21:39:35 +0200 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@suse.de> | 2010-08-10 10:54:17 -0700 |
| commit | 19bfed793ee38ce027326a3c518ff6201f673a8d (patch) | |
| tree | 1a5c2a2f0a8aa8e8fe8002a46c45fa8b678ad3c1 /drivers | |
| parent | 4f824cdefb327963c511434087fc3a8312f0f685 (diff) | |
ssb: do not read SPROM if it does not exist
commit d53cdbb94a52a920d5420ed64d986c3523a56743 upstream.
Attempting to read registers that don't exist on the SSB bus can cause
hangs on some boxes. At least some b43 devices are 'in the wild' that
don't have SPROMs at all. When the SSB bus support loads, it attempts
to read these (non-existant) SPROMs and causes hard hangs on the box --
no console output, etc.
This patch adds some intelligence to determine whether or not the SPROM
is present before attempting to read it. This avoids those hard hangs
on those devices with no SPROM attached to their SSB bus. The
SSB-attached devices (e.g. b43, et al.) won't work, but at least the box
will survive to test further patches. :-)
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Michael Buesch <mb@bu3sch.de>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/ssb/driver_chipcommon.c | 2 | ||||
| -rw-r--r-- | drivers/ssb/pci.c | 5 | ||||
| -rw-r--r-- | drivers/ssb/sprom.c | 14 |
3 files changed, 21 insertions, 0 deletions
diff --git a/drivers/ssb/driver_chipcommon.c b/drivers/ssb/driver_chipcommon.c index 9681536163c..a55cff8524c 100644 --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c @@ -233,6 +233,8 @@ void ssb_chipcommon_init(struct ssb_chipcommon *cc) { if (!cc->dev) return; /* We don't have a ChipCommon */ + if (cc->dev->id.revision >= 11) + cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT); ssb_pmu_init(cc); chipco_powercontrol_init(cc); ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c index a8dbb06623c..0e314ddccec 100644 --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c @@ -621,6 +621,11 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus, int err = -ENOMEM; u16 *buf; + if (!ssb_is_sprom_available(bus)) { + ssb_printk(KERN_ERR PFX "No SPROM available!\n"); + return -ENODEV; + } + buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); if (!buf) goto out; diff --git a/drivers/ssb/sprom.c b/drivers/ssb/sprom.c index f2f920fef10..007bc3a0348 100644 --- a/drivers/ssb/sprom.c +++ b/drivers/ssb/sprom.c @@ -176,3 +176,17 @@ const struct ssb_sprom *ssb_get_fallback_sprom(void) { return fallback_sprom; } + +/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */ +bool ssb_is_sprom_available(struct ssb_bus *bus) +{ + /* status register only exists on chipcomon rev >= 11 and we need check + for >= 31 only */ + /* this routine differs from specs as we do not access SPROM directly + on PCMCIA */ + if (bus->bustype == SSB_BUSTYPE_PCI && + bus->chipco.dev->id.revision >= 31) + return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM; + + return true; +} |