Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "A large number of cleanups, all over the platforms.  This is dominated
  largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
  others moving code out of arch/arm into more appropriate subsystems.

  The clocksource and irqchip drivers are now abstracted to the point
  where platforms that are already cleaned up do not need to even
  specify the driver they use, it can all get configured from the device
  tree as we do for normal device drivers.  The clocksource changes
  basically touch every single platform in the process.

  We further clean up the use of platform specific header files here,
  with the goal of turning more of the platforms over to being
  "multiplatform" enabled, which implies that they cannot expose their
  headers to architecture independent code any more.

  It is expected that no functional changes are part of the cleanup.
  The overall reduction in total code lines is mostly the result of
  removing broken and obsolete code."

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
  ARM: mvebu: correct gated clock documentation
  ARM: kirkwood: add missing include for nsa310
  ARM: exynos: move exynos4210-combiner to drivers/irqchip
  mfd: db8500-prcmu: update resource passing
  drivers/db8500-cpufreq: delete dangling include
  ARM: at91: remove NEOCORE 926 board
  sunxi: Cleanup the reset code and add meaningful registers defines
  ARM: S3C24XX: header mach/regs-mem.h local
  ARM: S3C24XX: header mach/regs-power.h local
  ARM: S3C24XX: header mach/regs-s3c2412-mem.h local
  ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/
  ARM: S3C24XX: transform s3c2443 subirqs into new structure
  ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2443 irq code to irq.c
  ARM: S3C24XX: transform s3c2416 irqs into new structure
  ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2416 irq init to common irq code
  ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property
  ARM: S3C24XX: Move irq syscore-ops to irq-pm
  clocksource: always define CLOCKSOURCE_OF_DECLARE
  ...

27 files changed, 2337 insertions, 118 deletions

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 7fdcbd3f4da..7d978c1bd52 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -1,3 +1,6 @@
+config CLKSRC_OF
+	bool
+
 config CLKSRC_I8253
 	bool
 
@@ -25,6 +28,9 @@ config ARMADA_370_XP_TIMER
 config SUNXI_TIMER
 	bool
 
+config VT8500_TIMER
+	bool
+
 config CLKSRC_NOMADIK_MTU
 	bool
 	depends on (ARCH_NOMADIK || ARCH_U8500)
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index f93453d0167..596c45c2f19 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_CLKSRC_OF)	+= clksrc-of.o
 obj-$(CONFIG_ATMEL_TCB_CLKSRC)	+= tcb_clksrc.o
 obj-$(CONFIG_X86_CYCLONE_TIMER)	+= cyclone.o
 obj-$(CONFIG_X86_PM_TIMER)	+= acpi_pm.o
@@ -16,5 +17,7 @@ obj-$(CONFIG_CLKSRC_DBX500_PRCMU)	+= clksrc-dbx500-prcmu.o
 obj-$(CONFIG_ARMADA_370_XP_TIMER)	+= time-armada-370-xp.o
 obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835_timer.o
 obj-$(CONFIG_SUNXI_TIMER)	+= sunxi_timer.o
+obj-$(CONFIG_ARCH_TEGRA)	+= tegra20_timer.o
+obj-$(CONFIG_VT8500_TIMER)	+= vt8500_timer.o
 
 obj-$(CONFIG_CLKSRC_ARM_GENERIC)	+= arm_generic.o
diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c
index bc19f12c20c..50c68fef944 100644
--- a/drivers/clocksource/bcm2835_timer.c
+++ b/drivers/clocksource/bcm2835_timer.c
@@ -16,7 +16,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/bcm2835_timer.h>
 #include <linux/bitops.h>
 #include <linux/clockchips.h>
 #include <linux/clocksource.h>
@@ -101,7 +100,7 @@ static struct of_device_id bcm2835_time_match[] __initconst = {
 	{}
 };
 
-static void __init bcm2835_time_init(void)
+static void __init bcm2835_timer_init(void)
 {
 	struct device_node *node;
 	void __iomem *base;
@@ -155,7 +154,5 @@ static void __init bcm2835_time_init(void)
 
 	pr_info("bcm2835: system timer (irq = %d)\n", irq);
 }
-
-struct sys_timer bcm2835_timer = {
-	.init = bcm2835_time_init,
-};
+CLOCKSOURCE_OF_DECLARE(bcm2835, "brcm,bcm2835-system-timer",
+			bcm2835_timer_init);
diff --git a/drivers/clocksource/clksrc-of.c b/drivers/clocksource/clksrc-of.c
new file mode 100644
index 00000000000..bdabdaa8d00
--- /dev/null
+++ b/drivers/clocksource/clksrc-of.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/of.h>
+
+extern struct of_device_id __clksrc_of_table[];
+
+static const struct of_device_id __clksrc_of_table_sentinel
+	__used __section(__clksrc_of_table_end);
+
+void __init clocksource_of_init(void)
+{
+	struct device_node *np;
+	const struct of_device_id *match;
+	void (*init_func)(void);
+
+	for_each_matching_node_and_match(np, __clksrc_of_table, &match) {
+		init_func = match->data;
+		init_func();
+	}
+}
diff --git a/drivers/clocksource/cs5535-clockevt.c b/drivers/clocksource/cs5535-clockevt.c
index d9279385304..ea210482dd2 100644
--- a/drivers/clocksource/cs5535-clockevt.c
+++ b/drivers/clocksource/cs5535-clockevt.c
@@ -100,7 +100,6 @@ static struct clock_event_device cs5535_clockevent = {
 	.set_mode = mfgpt_set_mode,
 	.set_next_event = mfgpt_next_event,
 	.rating = 250,
-	.shift = 32
 };
 
 static irqreturn_t mfgpt_tick(int irq, void *dev_id)
@@ -169,17 +168,11 @@ static int __init cs5535_mfgpt_init(void)
 	cs5535_mfgpt_write(cs5535_event_clock, MFGPT_REG_SETUP, val);
 
 	/* Set up the clock event */
-	cs5535_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC,
-			cs5535_clockevent.shift);
-	cs5535_clockevent.min_delta_ns = clockevent_delta2ns(0xF,
-			&cs5535_clockevent);
-	cs5535_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE,
-			&cs5535_clockevent);
-
 	printk(KERN_INFO DRV_NAME
 		": Registering MFGPT timer as a clock event, using IRQ %d\n",
 		timer_irq);
-	clockevents_register_device(&cs5535_clockevent);
+	clockevents_config_and_register(&cs5535_clockevent, MFGPT_HZ,
+					0xF, 0xFFFE);
 
 	return 0;
 
diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
index f7dba5b79b4..ab09ed3742e 100644
--- a/drivers/clocksource/dw_apb_timer_of.c
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -107,7 +107,7 @@ static const struct of_device_id osctimer_ids[] __initconst = {
 	{},
 };
 
-static void __init timer_init(void)
+void __init dw_apb_timer_init(void)
 {
 	struct device_node *event_timer, *source_timer;
 
@@ -125,7 +125,3 @@ static void __init timer_init(void)
 
 	init_sched_clock();
 }
-
-struct sys_timer dw_apb_timer = {
-	.init = timer_init,
-};
diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c
index 8914c3c1c88..025afc6dd32 100644
--- a/drivers/clocksource/nomadik-mtu.c
+++ b/drivers/clocksource/nomadik-mtu.c
@@ -134,12 +134,32 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode,
 	}
 }
 
+void nmdk_clksrc_reset(void)
+{
+	/* Disable */
+	writel(0, mtu_base + MTU_CR(0));
+
+	/* ClockSource: configure load and background-load, and fire it up */
+	writel(nmdk_cycle, mtu_base + MTU_LR(0));
+	writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
+
+	writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA,
+	       mtu_base + MTU_CR(0));
+}
+
+static void nmdk_clkevt_resume(struct clock_event_device *cedev)
+{
+	nmdk_clkevt_reset();
+	nmdk_clksrc_reset();
+}
+
 static struct clock_event_device nmdk_clkevt = {
 	.name		= "mtu_1",
 	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
 	.rating		= 200,
 	.set_mode	= nmdk_clkevt_mode,
 	.set_next_event	= nmdk_clkevt_next,
+	.resume		= nmdk_clkevt_resume,
 };
 
 /*
@@ -161,19 +181,6 @@ static struct irqaction nmdk_timer_irq = {
 	.dev_id		= &nmdk_clkevt,
 };
 
-void nmdk_clksrc_reset(void)
-{
-	/* Disable */
-	writel(0, mtu_base + MTU_CR(0));
-
-	/* ClockSource: configure load and background-load, and fire it up */
-	writel(nmdk_cycle, mtu_base + MTU_LR(0));
-	writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
-
-	writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA,
-	       mtu_base + MTU_CR(0));
-}
-
 void __init nmdk_timer_init(void __iomem *base, int irq)
 {
 	unsigned long rate;
diff --git a/drivers/clocksource/sunxi_timer.c b/drivers/clocksource/sunxi_timer.c
index 93d09d0e009..4086b916715 100644
--- a/drivers/clocksource/sunxi_timer.c
+++ b/drivers/clocksource/sunxi_timer.c
@@ -74,7 +74,6 @@ static int sunxi_clkevt_next_event(unsigned long evt,
 
 static struct clock_event_device sunxi_clockevent = {
 	.name = "sunxi_tick",
-	.shift = 32,
 	.rating = 300,
 	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_mode = sunxi_clkevt_mode,
@@ -104,7 +103,7 @@ static struct of_device_id sunxi_timer_dt_ids[] = {
 	{ }
 };
 
-static void __init sunxi_timer_init(void)
+void __init sunxi_timer_init(void)
 {
 	struct device_node *node;
 	unsigned long rate = 0;
@@ -154,18 +153,8 @@ static void __init sunxi_timer_init(void)
 	val = readl(timer_base + TIMER_CTL_REG);
 	writel(val | TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG);
 
-	sunxi_clockevent.mult = div_sc(rate / TIMER_SCAL,
-				NSEC_PER_SEC,
-				sunxi_clockevent.shift);
-	sunxi_clockevent.max_delta_ns = clockevent_delta2ns(0xff,
-							    &sunxi_clockevent);
-	sunxi_clockevent.min_delta_ns = clockevent_delta2ns(0x1,
-							    &sunxi_clockevent);
 	sunxi_clockevent.cpumask = cpumask_of(0);
 
-	clockevents_register_device(&sunxi_clockevent);
+	clockevents_config_and_register(&sunxi_clockevent, rate / TIMER_SCAL,
+					0x1, 0xff);
 }
-
-struct sys_timer sunxi_timer = {
-	.init = sunxi_timer_init,
-};
diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index 32cb929b8eb..8a6187225dd 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -157,7 +157,6 @@ static struct tc_clkevt_device clkevt = {
 		.name		= "tc_clkevt",
 		.features	= CLOCK_EVT_FEAT_PERIODIC
 					| CLOCK_EVT_FEAT_ONESHOT,
-		.shift		= 32,
 		/* Should be lower than at91rm9200's system timer */
 		.rating		= 125,
 		.set_next_event	= tc_next_event,
@@ -196,13 +195,9 @@ static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
 
 	timer_clock = clk32k_divisor_idx;
 
-	clkevt.clkevt.mult = div_sc(32768, NSEC_PER_SEC, clkevt.clkevt.shift);
-	clkevt.clkevt.max_delta_ns
-		= clockevent_delta2ns(0xffff, &clkevt.clkevt);
-	clkevt.clkevt.min_delta_ns = clockevent_delta2ns(1, &clkevt.clkevt) + 1;
 	clkevt.clkevt.cpumask = cpumask_of(0);
 
-	clockevents_register_device(&clkevt.clkevt);
+	clockevents_config_and_register(&clkevt.clkevt, 32768, 1, 0xffff);
 
 	setup_irq(irq, &tc_irqaction);
 }
diff --git a/drivers/clocksource/tegra20_timer.c b/drivers/clocksource/tegra20_timer.c
new file mode 100644
index 00000000000..0bde03feb09
--- /dev/null
+++ b/drivers/clocksource/tegra20_timer.c
@@ -0,0 +1,281 @@
+/*
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <asm/mach/time.h>
+#include <asm/smp_twd.h>
+#include <asm/sched_clock.h>
+
+#define RTC_SECONDS            0x08
+#define RTC_SHADOW_SECONDS     0x0c
+#define RTC_MILLISECONDS       0x10
+
+#define TIMERUS_CNTR_1US 0x10
+#define TIMERUS_USEC_CFG 0x14
+#define TIMERUS_CNTR_FREEZE 0x4c
+
+#define TIMER1_BASE 0x0
+#define TIMER2_BASE 0x8
+#define TIMER3_BASE 0x50
+#define TIMER4_BASE 0x58
+
+#define TIMER_PTV 0x0
+#define TIMER_PCR 0x4
+
+static void __iomem *timer_reg_base;
+static void __iomem *rtc_base;
+
+static struct timespec persistent_ts;
+static u64 persistent_ms, last_persistent_ms;
+
+#define timer_writel(value, reg) \
+	__raw_writel(value, timer_reg_base + (reg))
+#define timer_readl(reg) \
+	__raw_readl(timer_reg_base + (reg))
+
+static int tegra_timer_set_next_event(unsigned long cycles,
+					 struct clock_event_device *evt)
+{
+	u32 reg;
+
+	reg = 0x80000000 | ((cycles > 1) ? (cycles-1) : 0);
+	timer_writel(reg, TIMER3_BASE + TIMER_PTV);
+
+	return 0;
+}
+
+static void tegra_timer_set_mode(enum clock_event_mode mode,
+				    struct clock_event_device *evt)
+{
+	u32 reg;
+
+	timer_writel(0, TIMER3_BASE + TIMER_PTV);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		reg = 0xC0000000 | ((1000000/HZ)-1);
+		timer_writel(reg, TIMER3_BASE + TIMER_PTV);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static struct clock_event_device tegra_clockevent = {
+	.name		= "timer0",
+	.rating		= 300,
+	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+	.set_next_event	= tegra_timer_set_next_event,
+	.set_mode	= tegra_timer_set_mode,
+};
+
+static u32 notrace tegra_read_sched_clock(void)
+{
+	return timer_readl(TIMERUS_CNTR_1US);
+}
+
+/*
+ * tegra_rtc_read - Reads the Tegra RTC registers
+ * Care must be taken that this funciton is not called while the
+ * tegra_rtc driver could be executing to avoid race conditions
+ * on the RTC shadow register
+ */
+static u64 tegra_rtc_read_ms(void)
+{
+	u32 ms = readl(rtc_base + RTC_MILLISECONDS);
+	u32 s = readl(rtc_base + RTC_SHADOW_SECONDS);
+	return (u64)s * MSEC_PER_SEC + ms;
+}
+
+/*
+ * tegra_read_persistent_clock -  Return time from a persistent clock.
+ *
+ * Reads the time from a source which isn't disabled during PM, the
+ * 32k sync timer.  Convert the cycles elapsed since last read into
+ * nsecs and adds to a monotonically increasing timespec.
+ * Care must be taken that this funciton is not called while the
+ * tegra_rtc driver could be executing to avoid race conditions
+ * on the RTC shadow register
+ */
+static void tegra_read_persistent_clock(struct timespec *ts)
+{
+	u64 delta;
+	struct timespec *tsp = &persistent_ts;
+
+	last_persistent_ms = persistent_ms;
+	persistent_ms = tegra_rtc_read_ms();
+	delta = persistent_ms - last_persistent_ms;
+
+	timespec_add_ns(tsp, delta * NSEC_PER_MSEC);
+	*ts = *tsp;
+}
+
+static irqreturn_t tegra_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+	timer_writel(1<<30, TIMER3_BASE + TIMER_PCR);
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction tegra_timer_irq = {
+	.name		= "timer0",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_HIGH,
+	.handler	= tegra_timer_interrupt,
+	.dev_id		= &tegra_clockevent,
+};
+
+static const struct of_device_id timer_match[] __initconst = {
+	{ .compatible = "nvidia,tegra20-timer" },
+	{}
+};
+
+static const struct of_device_id rtc_match[] __initconst = {
+	{ .compatible = "nvidia,tegra20-rtc" },
+	{}
+};
+
+static void __init tegra20_init_timer(void)
+{
+	struct device_node *np;
+	struct clk *clk;
+	unsigned long rate;
+	int ret;
+
+	np = of_find_matching_node(NULL, timer_match);
+	if (!np) {
+		pr_err("Failed to find timer DT node\n");
+		BUG();
+	}
+
+	timer_reg_base = of_iomap(np, 0);
+	if (!timer_reg_base) {
+		pr_err("Can't map timer registers\n");
+		BUG();
+	}
+
+	tegra_timer_irq.irq = irq_of_parse_and_map(np, 2);
+	if (tegra_timer_irq.irq <= 0) {
+		pr_err("Failed to map timer IRQ\n");
+		BUG();
+	}
+
+	clk = clk_get_sys("timer", NULL);
+	if (IS_ERR(clk)) {
+		pr_warn("Unable to get timer clock. Assuming 12Mhz input clock.\n");
+		rate = 12000000;
+	} else {
+		clk_prepare_enable(clk);
+		rate = clk_get_rate(clk);
+	}
+
+	of_node_put(np);
+
+	np = of_find_matching_node(NULL, rtc_match);
+	if (!np) {
+		pr_err("Failed to find RTC DT node\n");
+		BUG();
+	}
+
+	rtc_base = of_iomap(np, 0);
+	if (!rtc_base) {
+		pr_err("Can't map RTC registers");
+		BUG();
+	}
+
+	/*
+	 * rtc registers are used by read_persistent_clock, keep the rtc clock
+	 * enabled
+	 */
+	clk = clk_get_sys("rtc-tegra", NULL);
+	if (IS_ERR(clk))
+		pr_warn("Unable to get rtc-tegra clock\n");
+	else
+		clk_prepare_enable(clk);
+
+	of_node_put(np);
+
+	switch (rate) {
+	case 12000000:
+		timer_writel(0x000b, TIMERUS_USEC_CFG);
+		break;
+	case 13000000:
+		timer_writel(0x000c, TIMERUS_USEC_CFG);
+		break;
+	case 19200000:
+		timer_writel(0x045f, TIMERUS_USEC_CFG);
+		break;
+	case 26000000:
+		timer_writel(0x0019, TIMERUS_USEC_CFG);
+		break;
+	default:
+		WARN(1, "Unknown clock rate");
+	}
+
+	setup_sched_clock(tegra_read_sched_clock, 32, 1000000);
+
+	if (clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US,
+		"timer_us", 1000000, 300, 32, clocksource_mmio_readl_up)) {
+		pr_err("Failed to register clocksource\n");
+		BUG();
+	}
+
+	ret = setup_irq(tegra_timer_irq.irq, &tegra_timer_irq);
+	if (ret) {
+		pr_err("Failed to register timer IRQ: %d\n", ret);
+		BUG();
+	}
+
+	tegra_clockevent.cpumask = cpu_all_mask;
+	tegra_clockevent.irq = tegra_timer_irq.irq;
+	clockevents_config_and_register(&tegra_clockevent, 1000000,
+					0x1, 0x1fffffff);
+#ifdef CONFIG_HAVE_ARM_TWD
+	twd_local_timer_of_register();
+#endif
+	register_persistent_clock(NULL, tegra_read_persistent_clock);
+}
+CLOCKSOURCE_OF_DECLARE(tegra20, "nvidia,tegra20-timer", tegra20_init_timer);
+
+#ifdef CONFIG_PM
+static u32 usec_config;
+
+void tegra_timer_suspend(void)
+{
+	usec_config = timer_readl(TIMERUS_USEC_CFG);
+}
+
+void tegra_timer_resume(void)
+{
+	timer_writel(usec_config, TIMERUS_USEC_CFG);
+}
+#endif
diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/vt8500_timer.c
new file mode 100644
index 00000000000..8efc86b5b5d
--- /dev/null
+++ b/drivers/clocksource/vt8500_timer.c
@@ -0,0 +1,180 @@
+/*
+ *  arch/arm/mach-vt8500/timer.c
+ *
+ *  Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * This file is copied and modified from the original timer.c provided by
+ * Alexey Charkov. Minor changes have been made for Device Tree Support.
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/delay.h>
+#include <asm/mach/time.h>
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define VT8500_TIMER_OFFSET	0x0100
+#define VT8500_TIMER_HZ		3000000
+#define TIMER_MATCH_VAL		0x0000
+#define TIMER_COUNT_VAL		0x0010
+#define TIMER_STATUS_VAL	0x0014
+#define TIMER_IER_VAL		0x001c		/* interrupt enable */
+#define TIMER_CTRL_VAL		0x0020
+#define TIMER_AS_VAL		0x0024		/* access status */
+#define TIMER_COUNT_R_ACTIVE	(1 << 5)	/* not ready for read */
+#define TIMER_COUNT_W_ACTIVE	(1 << 4)	/* not ready for write */
+#define TIMER_MATCH_W_ACTIVE	(1 << 0)	/* not ready for write */
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+
+static void __iomem *regbase;
+
+static cycle_t vt8500_timer_read(struct clocksource *cs)
+{
+	int loops = msecs_to_loops(10);
+	writel(3, regbase + TIMER_CTRL_VAL);
+	while ((readl((regbase + TIMER_AS_VAL)) & TIMER_COUNT_R_ACTIVE)
+						&& --loops)
+		cpu_relax();
+	return readl(regbase + TIMER_COUNT_VAL);
+}
+
+static struct clocksource clocksource = {
+	.name           = "vt8500_timer",
+	.rating         = 200,
+	.read           = vt8500_timer_read,
+	.mask           = CLOCKSOURCE_MASK(32),
+	.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int vt8500_timer_set_next_event(unsigned long cycles,
+				    struct clock_event_device *evt)
+{
+	int loops = msecs_to_loops(10);
+	cycle_t alarm = clocksource.read(&clocksource) + cycles;
+	while ((readl(regbase + TIMER_AS_VAL) & TIMER_MATCH_W_ACTIVE)
+						&& --loops)
+		cpu_relax();
+	writel((unsigned long)alarm, regbase + TIMER_MATCH_VAL);
+
+	if ((signed)(alarm - clocksource.read(&clocksource)) <= 16)
+		return -ETIME;
+
+	writel(1, regbase + TIMER_IER_VAL);
+
+	return 0;
+}
+
+static void vt8500_timer_set_mode(enum clock_event_mode mode,
+			      struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_RESUME:
+	case CLOCK_EVT_MODE_PERIODIC:
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		writel(readl(regbase + TIMER_CTRL_VAL) | 1,
+			regbase + TIMER_CTRL_VAL);
+		writel(0, regbase + TIMER_IER_VAL);
+		break;
+	}
+}
+
+static struct clock_event_device clockevent = {
+	.name           = "vt8500_timer",
+	.features       = CLOCK_EVT_FEAT_ONESHOT,
+	.rating         = 200,
+	.set_next_event = vt8500_timer_set_next_event,
+	.set_mode       = vt8500_timer_set_mode,
+};
+
+static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+	writel(0xf, regbase + TIMER_STATUS_VAL);
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction irq = {
+	.name    = "vt8500_timer",
+	.flags   = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler = vt8500_timer_interrupt,
+	.dev_id  = &clockevent,
+};
+
+static struct of_device_id vt8500_timer_ids[] = {
+	{ .compatible = "via,vt8500-timer" },
+	{ }
+};
+
+static void __init vt8500_timer_init(void)
+{
+	struct device_node *np;
+	int timer_irq;
+
+	np = of_find_matching_node(NULL, vt8500_timer_ids);
+	if (!np) {
+		pr_err("%s: Timer description missing from Device Tree\n",
+								__func__);
+		return;
+	}
+	regbase = of_iomap(np, 0);
+	if (!regbase) {
+		pr_err("%s: Missing iobase description in Device Tree\n",
+								__func__);
+		of_node_put(np);
+		return;
+	}
+	timer_irq = irq_of_parse_and_map(np, 0);
+	if (!timer_irq) {
+		pr_err("%s: Missing irq description in Device Tree\n",
+								__func__);
+		of_node_put(np);
+		return;
+	}
+
+	writel(1, regbase + TIMER_CTRL_VAL);
+	writel(0xf, regbase + TIMER_STATUS_VAL);
+	writel(~0, regbase + TIMER_MATCH_VAL);
+
+	if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ))
+		pr_err("%s: vt8500_timer_init: clocksource_register failed for %s\n",
+					__func__, clocksource.name);
+
+	clockevent.cpumask = cpumask_of(0);
+
+	if (setup_irq(timer_irq, &irq))
+		pr_err("%s: setup_irq failed for %s\n", __func__,
+							clockevent.name);
+	clockevents_config_and_register(&clockevent, VT8500_TIMER_HZ,
+					4, 0xf0000000);
+}
+
+CLOCKSOURCE_OF_DECLARE(vt8500, "via,vt8500-timer", vt8500_timer_init)
diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c
index 79a84860ea5..48a1988149d 100644
--- a/drivers/cpufreq/db8500-cpufreq.c
+++ b/drivers/cpufreq/db8500-cpufreq.c
@@ -15,7 +15,6 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
-#include <mach/id.h>
 
 static struct cpufreq_frequency_table *freq_table;
 static struct clk *armss_clk;
@@ -165,9 +164,6 @@ static struct platform_driver db8500_cpufreq_plat_driver = {
 
 static int __init db8500_cpufreq_register(void)
 {
-	if (!cpu_is_u8500_family())
-		return -ENODEV;
-
 	pr_info("cpufreq for DB8500 started\n");
 	return platform_driver_register(&db8500_cpufreq_plat_driver);
 }
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index 69b676dd335..78057a357dd 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -18,10 +18,10 @@
 #include <linux/cpufreq.h>
 #include <linux/suspend.h>
 
-#include <mach/cpufreq.h>
-
 #include <plat/cpu.h>
 
+#include "exynos-cpufreq.h"
+
 static struct exynos_dvfs_info *exynos_info;
 
 static struct regulator *arm_regulator;
diff --git a/drivers/cpufreq/exynos-cpufreq.h b/drivers/cpufreq/exynos-cpufreq.h
new file mode 100644
index 00000000000..92b852ee5dd
--- /dev/null
+++ b/drivers/cpufreq/exynos-cpufreq.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS - CPUFreq support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+enum cpufreq_level_index {
+	L0, L1, L2, L3, L4,
+	L5, L6, L7, L8, L9,
+	L10, L11, L12, L13, L14,
+	L15, L16, L17, L18, L19,
+	L20,
+};
+
+#define APLL_FREQ(f, a0, a1, a2, a3, a4, a5, a6, a7, b0, b1, b2, m, p, s) \
+	{ \
+		.freq = (f) * 1000, \
+		.clk_div_cpu0 = ((a0) | (a1) << 4 | (a2) << 8 | (a3) << 12 | \
+			(a4) << 16 | (a5) << 20 | (a6) << 24 | (a7) << 28), \
+		.clk_div_cpu1 = (b0 << 0 | b1 << 4 | b2 << 8), \
+		.mps = ((m) << 16 | (p) << 8 | (s)), \
+	}
+
+struct apll_freq {
+	unsigned int freq;
+	u32 clk_div_cpu0;
+	u32 clk_div_cpu1;
+	u32 mps;
+};
+
+struct exynos_dvfs_info {
+	unsigned long	mpll_freq_khz;
+	unsigned int	pll_safe_idx;
+	struct clk	*cpu_clk;
+	unsigned int	*volt_table;
+	struct cpufreq_frequency_table	*freq_table;
+	void (*set_freq)(unsigned int, unsigned int);
+	bool (*need_apll_change)(unsigned int, unsigned int);
+};
+
+extern int exynos4210_cpufreq_init(struct exynos_dvfs_info *);
+extern int exynos4x12_cpufreq_init(struct exynos_dvfs_info *);
+extern int exynos5250_cpufreq_init(struct exynos_dvfs_info *);
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
index de91755e255..add7fbec4fc 100644
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ b/drivers/cpufreq/exynos4210-cpufreq.c
@@ -18,7 +18,8 @@
 #include <linux/cpufreq.h>
 
 #include <mach/regs-clock.h>
-#include <mach/cpufreq.h>
+
+#include "exynos-cpufreq.h"
 
 static struct clk *cpu_clk;
 static struct clk *moutcore;
diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c
index 0661039e5d4..08b7477b0aa 100644
--- a/drivers/cpufreq/exynos4x12-cpufreq.c
+++ b/drivers/cpufreq/exynos4x12-cpufreq.c
@@ -18,7 +18,8 @@
 #include <linux/cpufreq.h>
 
 #include <mach/regs-clock.h>
-#include <mach/cpufreq.h>
+
+#include "exynos-cpufreq.h"
 
 static struct clk *cpu_clk;
 static struct clk *moutcore;
diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c
index b9344869f82..9fae466d774 100644
--- a/drivers/cpufreq/exynos5250-cpufreq.c
+++ b/drivers/cpufreq/exynos5250-cpufreq.c
@@ -19,7 +19,8 @@
 
 #include <mach/map.h>
 #include <mach/regs-clock.h>
-#include <mach/cpufreq.h>
+
+#include "exynos-cpufreq.h"
 
 static struct clk *cpu_clk;
 static struct clk *moutcore;
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index b2016ed941a..b3643ff007e 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -38,7 +38,6 @@
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
-#include <plat/gpio-fns.h>
 #include <plat/pm.h>
 
 int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 62ca575701d..a350969e5ef 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -1,3 +1,30 @@
+config IRQCHIP
+	def_bool y
+	depends on OF_IRQ
+
+config ARM_GIC
+	bool
+	select IRQ_DOMAIN
+	select MULTI_IRQ_HANDLER
+
+config GIC_NON_BANKED
+	bool
+
+config ARM_VIC
+	bool
+	select IRQ_DOMAIN
+	select MULTI_IRQ_HANDLER
+
+config ARM_VIC_NR
+	int
+	default 4 if ARCH_S5PV210
+	default 3 if ARCH_S5PC100
+	default 2
+	depends on ARM_VIC
+	help
+	  The maximum number of VICs available in the system, for
+	  power management.
+
 config VERSATILE_FPGA_IRQ
 	bool
 	select IRQ_DOMAIN
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index bf4609a5bd9..e65fbf2cdf7 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -1,4 +1,9 @@
+obj-$(CONFIG_IRQCHIP)			+= irqchip.o
+
 obj-$(CONFIG_ARCH_BCM2835)		+= irq-bcm2835.o
+obj-$(CONFIG_ARCH_EXYNOS)		+= exynos-combiner.o
 obj-$(CONFIG_ARCH_SUNXI)		+= irq-sunxi.o
-obj-$(CONFIG_VERSATILE_FPGA_IRQ)	+= irq-versatile-fpga.o
 obj-$(CONFIG_ARCH_SPEAR3XX)		+= spear-shirq.o
+obj-$(CONFIG_ARM_GIC)			+= irq-gic.o
+obj-$(CONFIG_ARM_VIC)			+= irq-vic.o
+obj-$(CONFIG_VERSATILE_FPGA_IRQ)	+= irq-versatile-fpga.o
diff --git a/drivers/irqchip/exynos-combiner.c b/drivers/irqchip/exynos-combiner.c
new file mode 100644
index 00000000000..04d86a9803f
--- /dev/null
+++ b/drivers/irqchip/exynos-combiner.c
@@ -0,0 +1,230 @@
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Combiner irqchip for EXYNOS
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/mach/irq.h>
+
+#include <plat/cpu.h>
+
+#include "irqchip.h"
+
+#define COMBINER_ENABLE_SET	0x0
+#define COMBINER_ENABLE_CLEAR	0x4
+#define COMBINER_INT_STATUS	0xC
+
+static DEFINE_SPINLOCK(irq_controller_lock);
+
+struct combiner_chip_data {
+	unsigned int irq_offset;
+	unsigned int irq_mask;
+	void __iomem *base;
+};
+
+static struct irq_domain *combiner_irq_domain;
+static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
+
+static inline void __iomem *combiner_base(struct irq_data *data)
+{
+	struct combiner_chip_data *combiner_data =
+		irq_data_get_irq_chip_data(data);
+
+	return combiner_data->base;
+}
+
+static void combiner_mask_irq(struct irq_data *data)
+{
+	u32 mask = 1 << (data->hwirq % 32);
+
+	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
+}
+
+static void combiner_unmask_irq(struct irq_data *data)
+{
+	u32 mask = 1 << (data->hwirq % 32);
+
+	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
+}
+
+static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
+{
+	struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
+	struct irq_chip *chip = irq_get_chip(irq);
+	unsigned int cascade_irq, combiner_irq;
+	unsigned long status;
+
+	chained_irq_enter(chip, desc);
+
+	spin_lock(&irq_controller_lock);
+	status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
+	spin_unlock(&irq_controller_lock);
+	status &= chip_data->irq_mask;
+
+	if (status == 0)
+		goto out;
+
+	combiner_irq = __ffs(status);
+
+	cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
+	if (unlikely(cascade_irq >= NR_IRQS))
+		do_bad_IRQ(cascade_irq, desc);
+	else
+		generic_handle_irq(cascade_irq);
+
+ out:
+	chained_irq_exit(chip, desc);
+}
+
+static struct irq_chip combiner_chip = {
+	.name		= "COMBINER",
+	.irq_mask	= combiner_mask_irq,
+	.irq_unmask	= combiner_unmask_irq,
+};
+
+static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
+{
+	unsigned int max_nr;
+
+	if (soc_is_exynos5250())
+		max_nr = EXYNOS5_MAX_COMBINER_NR;
+	else
+		max_nr = EXYNOS4_MAX_COMBINER_NR;
+
+	if (combiner_nr >= max_nr)
+		BUG();
+	if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
+		BUG();
+	irq_set_chained_handler(irq, combiner_handle_cascade_irq);
+}
+
+static void __init combiner_init_one(unsigned int combiner_nr,
+				     void __iomem *base)
+{
+	combiner_data[combiner_nr].base = base;
+	combiner_data[combiner_nr].irq_offset = irq_find_mapping(
+		combiner_irq_domain, combiner_nr * MAX_IRQ_IN_COMBINER);
+	combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
+
+	/* Disable all interrupts */
+	__raw_writel(combiner_data[combiner_nr].irq_mask,
+		     base + COMBINER_ENABLE_CLEAR);
+}
+
+#ifdef CONFIG_OF
+static int combiner_irq_domain_xlate(struct irq_domain *d,
+				     struct device_node *controller,
+				     const u32 *intspec, unsigned int intsize,
+				     unsigned long *out_hwirq,
+				     unsigned int *out_type)
+{
+	if (d->of_node != controller)
+		return -EINVAL;
+
+	if (intsize < 2)
+		return -EINVAL;
+
+	*out_hwirq = intspec[0] * MAX_IRQ_IN_COMBINER + intspec[1];
+	*out_type = 0;
+
+	return 0;
+}
+#else
+static int combiner_irq_domain_xlate(struct irq_domain *d,
+				     struct device_node *controller,
+				     const u32 *intspec, unsigned int intsize,
+				     unsigned long *out_hwirq,
+				     unsigned int *out_type)
+{
+	return -EINVAL;
+}
+#endif
+
+static int combiner_irq_domain_map(struct irq_domain *d, unsigned int irq,
+				   irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(irq, &combiner_chip, handle_level_irq);
+	irq_set_chip_data(irq, &combiner_data[hw >> 3]);
+	set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+
+	return 0;
+}
+
+static struct irq_domain_ops combiner_irq_domain_ops = {
+	.xlate	= combiner_irq_domain_xlate,
+	.map	= combiner_irq_domain_map,
+};
+
+void __init combiner_init(void __iomem *combiner_base,
+			  struct device_node *np)
+{
+	int i, irq, irq_base;
+	unsigned int max_nr, nr_irq;
+
+	if (np) {
+		if (of_property_read_u32(np, "samsung,combiner-nr", &max_nr)) {
+			pr_warning("%s: number of combiners not specified, "
+				"setting default as %d.\n",
+				__func__, EXYNOS4_MAX_COMBINER_NR);
+			max_nr = EXYNOS4_MAX_COMBINER_NR;
+		}
+	} else {
+		max_nr = soc_is_exynos5250() ? EXYNOS5_MAX_COMBINER_NR :
+						EXYNOS4_MAX_COMBINER_NR;
+	}
+	nr_irq = max_nr * MAX_IRQ_IN_COMBINER;
+
+	irq_base = irq_alloc_descs(COMBINER_IRQ(0, 0), 1, nr_irq, 0);
+	if (IS_ERR_VALUE(irq_base)) {
+		irq_base = COMBINER_IRQ(0, 0);
+		pr_warning("%s: irq desc alloc failed. Continuing with %d as linux irq base\n", __func__, irq_base);
+	}
+
+	combiner_irq_domain = irq_domain_add_legacy(np, nr_irq, irq_base, 0,
+				&combiner_irq_domain_ops, &combiner_data);
+	if (WARN_ON(!combiner_irq_domain)) {
+		pr_warning("%s: irq domain init failed\n", __func__);
+		return;
+	}
+
+	for (i = 0; i < max_nr; i++) {
+		combiner_init_one(i, combiner_base + (i >> 2) * 0x10);
+		irq = IRQ_SPI(i);
+#ifdef CONFIG_OF
+		if (np)
+			irq = irq_of_parse_and_map(np, i);
+#endif
+		combiner_cascade_irq(i, irq);
+	}
+}
+
+#ifdef CONFIG_OF
+static int __init combiner_of_init(struct device_node *np,
+				   struct device_node *parent)
+{
+	void __iomem *combiner_base;
+
+	combiner_base = of_iomap(np, 0);
+	if (!combiner_base) {
+		pr_err("%s: failed to map combiner registers\n", __func__);
+		return -ENXIO;
+	}
+
+	combiner_init(combiner_base, np);
+
+	return 0;
+}
+IRQCHIP_DECLARE(exynos4210_combiner, "samsung,exynos4210-combiner",
+		combiner_of_init);
+#endif
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
new file mode 100644
index 00000000000..644d7246842
--- /dev/null
+++ b/drivers/irqchip/irq-gic.c
@@ -0,0 +1,845 @@
+/*
+ *  linux/arch/arm/common/gic.c
+ *
+ *  Copyright (C) 2002 ARM Limited, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Interrupt architecture for the GIC:
+ *
+ * o There is one Interrupt Distributor, which receives interrupts
+ *   from system devices and sends them to the Interrupt Controllers.
+ *
+ * o There is one CPU Interface per CPU, which sends interrupts sent
+ *   by the Distributor, and interrupts generated locally, to the
+ *   associated CPU. The base address of the CPU interface is usually
+ *   aliased so that the same address points to different chips depending
+ *   on the CPU it is accessed from.
+ *
+ * Note that IRQs 0-31 are special - they are local to each CPU.
+ * As such, the enable set/clear, pending set/clear and active bit
+ * registers are banked per-cpu for these sources.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/smp.h>
+#include <linux/cpu_pm.h>
+#include <linux/cpumask.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+#include <linux/slab.h>
+#include <linux/irqchip/arm-gic.h>
+
+#include <asm/irq.h>
+#include <asm/exception.h>
+#include <asm/smp_plat.h>
+#include <asm/mach/irq.h>
+
+#include "irqchip.h"
+
+union gic_base {
+	void __iomem *common_base;
+	void __percpu __iomem **percpu_base;
+};
+
+struct gic_chip_data {
+	union gic_base dist_base;
+	union gic_base cpu_base;
+#ifdef CONFIG_CPU_PM
+	u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
+	u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
+	u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
+	u32 __percpu *saved_ppi_enable;
+	u32 __percpu *saved_ppi_conf;
+#endif
+	struct irq_domain *domain;
+	unsigned int gic_irqs;
+#ifdef CONFIG_GIC_NON_BANKED
+	void __iomem *(*get_base)(union gic_base *);
+#endif
+};
+
+static DEFINE_RAW_SPINLOCK(irq_controller_lock);
+
+/*
+ * The GIC mapping of CPU interfaces does not necessarily match
+ * the logical CPU numbering.  Let's use a mapping as returned
+ * by the GIC itself.
+ */
+#define NR_GIC_CPU_IF 8
+static u8 gic_cpu_map[NR_GIC_CPU_IF] __read_mostly;
+
+/*
+ * Supported arch specific GIC irq extension.
+ * Default make them NULL.
+ */
+struct irq_chip gic_arch_extn = {
+	.irq_eoi	= NULL,
+	.irq_mask	= NULL,
+	.irq_unmask	= NULL,
+	.irq_retrigger	= NULL,
+	.irq_set_type	= NULL,
+	.irq_set_wake	= NULL,
+};
+
+#ifndef MAX_GIC_NR
+#define MAX_GIC_NR	1
+#endif
+
+static struct gic_chip_data gic_data[MAX_GIC_NR] __read_mostly;
+
+#ifdef CONFIG_GIC_NON_BANKED
+static void __iomem *gic_get_percpu_base(union gic_base *base)
+{
+	return *__this_cpu_ptr(base->percpu_base);
+}
+
+static void __iomem *gic_get_common_base(union gic_base *base)
+{
+	return base->common_base;
+}
+
+static inline void __iomem *gic_data_dist_base(struct gic_chip_data *data)
+{
+	return data->get_base(&data->dist_base);
+}
+
+static inline void __iomem *gic_data_cpu_base(struct gic_chip_data *data)
+{
+	return data->get_base(&data->cpu_base);
+}
+
+static inline void gic_set_base_accessor(struct gic_chip_data *data,
+					 void __iomem *(*f)(union gic_base *))
+{
+	data->get_base = f;
+}
+#else
+#define gic_data_dist_base(d)	((d)->dist_base.common_base)
+#define gic_data_cpu_base(d)	((d)->cpu_base.common_base)
+#define gic_set_base_accessor(d,f)
+#endif
+
+static inline void __iomem *gic_dist_base(struct irq_data *d)
+{
+	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
+	return gic_data_dist_base(gic_data);
+}
+
+static inline void __iomem *gic_cpu_base(struct irq_data *d)
+{
+	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
+	return gic_data_cpu_base(gic_data);
+}
+
+static inline unsigned int gic_irq(struct irq_data *d)
+{
+	return d->hwirq;
+}
+
+/*
+ * Routines to acknowledge, disable and enable interrupts
+ */
+static void gic_mask_irq(struct irq_data *d)
+{
+	u32 mask = 1 << (gic_irq(d) % 32);
+
+	raw_spin_lock(&irq_controller_lock);
+	writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4);
+	if (gic_arch_extn.irq_mask)
+		gic_arch_extn.irq_mask(d);
+	raw_spin_unlock(&irq_controller_lock);
+}
+
+static void gic_unmask_irq(struct irq_data *d)
+{
+	u32 mask = 1 << (gic_irq(d) % 32);
+
+	raw_spin_lock(&irq_controller_lock);
+	if (gic_arch_extn.irq_unmask)
+		gic_arch_extn.irq_unmask(d);
+	writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_SET + (gic_irq(d) / 32) * 4);
+	raw_spin_unlock(&irq_controller_lock);
+}
+
+static void gic_eoi_irq(struct irq_data *d)
+{
+	if (gic_arch_extn.irq_eoi) {
+		raw_spin_lock(&irq_controller_lock);
+		gic_arch_extn.irq_eoi(d);
+		raw_spin_unlock(&irq_controller_lock);
+	}
+
+	writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI);
+}
+
+static int gic_set_type(struct irq_data *d, unsigned int type)
+{
+	void __iomem *base = gic_dist_base(d);
+	unsigned int gicirq = gic_irq(d);
+	u32 enablemask = 1 << (gicirq % 32);
+	u32 enableoff = (gicirq / 32) * 4;
+	u32 confmask = 0x2 << ((gicirq % 16) * 2);
+	u32 confoff = (gicirq / 16) * 4;
+	bool enabled = false;
+	u32 val;
+
+	/* Interrupt configuration for SGIs can't be changed */
+	if (gicirq < 16)
+		return -EINVAL;
+
+	if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
+		return -EINVAL;
+
+	raw_spin_lock(&irq_controller_lock);
+
+	if (gic_arch_extn.irq_set_type)
+		gic_arch_extn.irq_set_type(d, type);
+
+	val = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
+	if (type == IRQ_TYPE_LEVEL_HIGH)
+		val &= ~confmask;
+	else if (type == IRQ_TYPE_EDGE_RISING)
+		val |= confmask;
+
+	/*
+	 * As recommended by the spec, disable the interrupt before changing
+	 * the configuration
+	 */
+	if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
+		writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
+		enabled = true;
+	}
+
+	writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
+
+	if (enabled)
+		writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
+
+	raw_spin_unlock(&irq_controller_lock);
+
+	return 0;
+}
+
+static int gic_retrigger(struct irq_data *d)
+{
+	if (gic_arch_extn.irq_retrigger)
+		return gic_arch_extn.irq_retrigger(d);
+
+	return -ENXIO;
+}
+
+#ifdef CONFIG_SMP
+static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
+			    bool force)
+{
+	void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3);
+	unsigned int shift = (gic_irq(d) % 4) * 8;
+	unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask);
+	u32 val, mask, bit;
+
+	if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids)
+		return -EINVAL;
+
+	mask = 0xff << shift;
+	bit = gic_cpu_map[cpu] << shift;
+
+	raw_spin_lock(&irq_controller_lock);
+	val = readl_relaxed(reg) & ~mask;
+	writel_relaxed(val | bit, reg);
+	raw_spin_unlock(&irq_controller_lock);
+
+	return IRQ_SET_MASK_OK;
+}
+#endif
+
+#ifdef CONFIG_PM
+static int gic_set_wake(struct irq_data *d, unsigned int on)
+{
+	int ret = -ENXIO;
+
+	if (gic_arch_extn.irq_set_wake)
+		ret = gic_arch_extn.irq_set_wake(d, on);
+
+	return ret;
+}
+
+#else
+#define gic_set_wake	NULL
+#endif
+
+static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
+{
+	u32 irqstat, irqnr;
+	struct gic_chip_data *gic = &gic_data[0];
+	void __iomem *cpu_base = gic_data_cpu_base(gic);
+
+	do {
+		irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK);
+		irqnr = irqstat & ~0x1c00;
+
+		if (likely(irqnr > 15 && irqnr < 1021)) {
+			irqnr = irq_find_mapping(gic->domain, irqnr);
+			handle_IRQ(irqnr, regs);
+			continue;
+		}
+		if (irqnr < 16) {
+			writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
+#ifdef CONFIG_SMP
+			handle_IPI(irqnr, regs);
+#endif
+			continue;
+		}
+		break;
+	} while (1);
+}
+
+static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
+{
+	struct gic_chip_data *chip_data = irq_get_handler_data(irq);
+	struct irq_chip *chip = irq_get_chip(irq);
+	unsigned int cascade_irq, gic_irq;
+	unsigned long status;
+
+	chained_irq_enter(chip, desc);
+
+	raw_spin_lock(&irq_controller_lock);
+	status = readl_relaxed(gic_data_cpu_base(chip_data) + GIC_CPU_INTACK);
+	raw_spin_unlock(&irq_controller_lock);
+
+	gic_irq = (status & 0x3ff);
+	if (gic_irq == 1023)
+		goto out;
+
+	cascade_irq = irq_find_mapping(chip_data->domain, gic_irq);
+	if (unlikely(gic_irq < 32 || gic_irq > 1020))
+		do_bad_IRQ(cascade_irq, desc);
+	else
+		generic_handle_irq(cascade_irq);
+
+ out:
+	chained_irq_exit(chip, desc);
+}
+
+static struct irq_chip gic_chip = {
+	.name			= "GIC",
+	.irq_mask		= gic_mask_irq,
+	.irq_unmask		= gic_unmask_irq,
+	.irq_eoi		= gic_eoi_irq,
+	.irq_set_type		= gic_set_type,
+	.irq_retrigger		= gic_retrigger,
+#ifdef CONFIG_SMP
+	.irq_set_affinity	= gic_set_affinity,
+#endif
+	.irq_set_wake		= gic_set_wake,
+};
+
+void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
+{
+	if (gic_nr >= MAX_GIC_NR)
+		BUG();
+	if (irq_set_handler_data(irq, &gic_data[gic_nr]) != 0)
+		BUG();
+	irq_set_chained_handler(irq, gic_handle_cascade_irq);
+}
+
+static u8 gic_get_cpumask(struct gic_chip_data *gic)
+{
+	void __iomem *base = gic_data_dist_base(gic);
+	u32 mask, i;
+
+	for (i = mask = 0; i < 32; i += 4) {
+		mask = readl_relaxed(base + GIC_DIST_TARGET + i);
+		mask |= mask >> 16;
+		mask |= mask >> 8;
+		if (mask)
+			break;
+	}
+
+	if (!mask)
+		pr_crit("GIC CPU mask not found - kernel will fail to boot.\n");
+
+	return mask;
+}
+
+static void __init gic_dist_init(struct gic_chip_data *gic)
+{
+	unsigned int i;
+	u32 cpumask;
+	unsigned int gic_irqs = gic->gic_irqs;
+	void __iomem *base = gic_data_dist_base(gic);
+
+	writel_relaxed(0, base + GIC_DIST_CTRL);
+
+	/*
+	 * Set all global interrupts to be level triggered, active low.
+	 */
+	for (i = 32; i < gic_irqs; i += 16)
+		writel_relaxed(0, base + GIC_DIST_CONFIG + i * 4 / 16);
+
+	/*
+	 * Set all global interrupts to this CPU only.
+	 */
+	cpumask = gic_get_cpumask(gic);
+	cpumask |= cpumask << 8;
+	cpumask |= cpumask << 16;
+	for (i = 32; i < gic_irqs; i += 4)
+		writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
+
+	/*
+	 * Set priority on all global interrupts.
+	 */
+	for (i = 32; i < gic_irqs; i += 4)
+		writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
+
+	/*
+	 * Disable all interrupts.  Leave the PPI and SGIs alone
+	 * as these enables are banked registers.
+	 */
+	for (i = 32; i < gic_irqs; i += 32)
+		writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
+
+	writel_relaxed(1, base + GIC_DIST_CTRL);
+}
+
+static void __cpuinit gic_cpu_init(struct gic_chip_data *gic)
+{
+	void __iomem *dist_base = gic_data_dist_base(gic);
+	void __iomem *base = gic_data_cpu_base(gic);
+	unsigned int cpu_mask, cpu = smp_processor_id();
+	int i;
+
+	/*
+	 * Get what the GIC says our CPU mask is.
+	 */
+	BUG_ON(cpu >= NR_GIC_CPU_IF);
+	cpu_mask = gic_get_cpumask(gic);
+	gic_cpu_map[cpu] = cpu_mask;
+
+	/*
+	 * Clear our mask from the other map entries in case they're
+	 * still undefined.
+	 */
+	for (i = 0; i < NR_GIC_CPU_IF; i++)
+		if (i != cpu)
+			gic_cpu_map[i] &= ~cpu_mask;
+
+	/*
+	 * Deal with the banked PPI and SGI interrupts - disable all
+	 * PPI interrupts, ensure all SGI interrupts are enabled.
+	 */
+	writel_relaxed(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
+	writel_relaxed(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
+
+	/*
+	 * Set priority on PPI and SGI interrupts
+	 */
+	for (i = 0; i < 32; i += 4)
+		writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
+
+	writel_relaxed(0xf0, base + GIC_CPU_PRIMASK);
+	writel_relaxed(1, base + GIC_CPU_CTRL);
+}
+
+#ifdef CONFIG_CPU_PM
+/*
+ * Saves the GIC distributor registers during suspend or idle.  Must be called
+ * with interrupts disabled but before powering down the GIC.  After calling
+ * this function, no interrupts will be delivered by the GIC, and another
+ * platform-specific wakeup source must be enabled.
+ */
+static void gic_dist_save(unsigned int gic_nr)
+{
+	unsigned int gic_irqs;
+	void __iomem *dist_base;
+	int i;
+
+	if (gic_nr >= MAX_GIC_NR)
+		BUG();
+
+	gic_irqs = gic_data[gic_nr].gic_irqs;
+	dist_base = gic_data_dist_base(&gic_data[gic_nr]);
+
+	if (!dist_base)
+		return;
+
+	for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
+		gic_data[gic_nr].saved_spi_conf[i] =
+			readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
+
+	for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
+		gic_data[gic_nr].saved_spi_target[i] =
+			readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4);
+
+	for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
+		gic_data[gic_nr].saved_spi_enable[i] =
+			readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
+}
+
+/*
+ * Restores the GIC distributor registers during resume or when coming out of
+ * idle.  Must be called before enabling interrupts.  If a level interrupt
+ * that occured while the GIC was suspended is still present, it will be
+ * handled normally, but any edge interrupts that occured will not be seen by
+ * the GIC and need to be handled by the platform-specific wakeup source.
+ */
+static void gic_dist_restore(unsigned int gic_nr)
+{
+	unsigned int gic_irqs;
+	unsigned int i;
+	void __iomem *dist_base;
+
+	if (gic_nr >= MAX_GIC_NR)
+		BUG();
+
+	gic_irqs = gic_data[gic_nr].gic_irqs;
+	dist_base = gic_data_dist_base(&gic_data[gic_nr]);
+
+	if (!dist_base)
+		return;
+
+	writel_relaxed(0, dist_base + GIC_DIST_CTRL);
+
+	for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
+		writel_relaxed(gic_data[gic_nr].saved_spi_conf[i],
+			dist_base + GIC_DIST_CONFIG + i * 4);
+
+	for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
+		writel_relaxed(0xa0a0a0a0,
+			dist_base + GIC_DIST_PRI + i * 4);
+
+	for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
+		writel_relaxed(gic_data[gic_nr].saved_spi_target[i],
+			dist_base + GIC_DIST_TARGET + i * 4);
+
+	for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
+		writel_relaxed(gic_data[gic_nr].saved_spi_enable[i],
+			dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+	writel_relaxed(1, dist_base + GIC_DIST_CTRL);
+}
+
+static void gic_cpu_save(unsigned int gic_nr)
+{
+	int i;
+	u32 *ptr;
+	void __iomem *dist_base;
+	void __iomem *cpu_base;
+
+	if (gic_nr >= MAX_GIC_NR)
+		BUG();
+
+	dist_base = gic_data_dist_base(&gic_data[gic_nr]);
+	cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
+
+	if (!dist_base || !cpu_base)
+		return;
+
+	ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
+	for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
+		ptr[i] = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+	ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
+	for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
+		ptr[i] = readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
+
+}
+
+static void gic_cpu_restore(unsigned int gic_nr)
+{
+	int i;
+	u32 *ptr;
+	void __iomem *dist_base;
+	void __iomem *cpu_base;
+
+	if (gic_nr >= MAX_GIC_NR)
+		BUG();
+
+	dist_base = gic_data_dist_base(&gic_data[gic_nr]);
+	cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
+
+	if (!dist_base || !cpu_base)
+		return;
+
+	ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
+	for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
+		writel_relaxed(ptr[i], dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+	ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
+	for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
+		writel_relaxed(ptr[i], dist_base + GIC_DIST_CONFIG + i * 4);
+
+	for (i = 0; i < DIV_ROUND_UP(32, 4); i++)
+		writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4);
+
+	writel_relaxed(0xf0, cpu_base + GIC_CPU_PRIMASK);
+	writel_relaxed(1, cpu_base + GIC_CPU_CTRL);
+}
+
+static int gic_notifier(struct notifier_block *self, unsigned long cmd,	void *v)
+{
+	int i;
+
+	for (i = 0; i < MAX_GIC_NR; i++) {
+#ifdef CONFIG_GIC_NON_BANKED
+		/* Skip over unused GICs */
+		if (!gic_data[i].get_base)
+			continue;
+#endif
+		switch (cmd) {
+		case CPU_PM_ENTER:
+			gic_cpu_save(i);
+			break;
+		case CPU_PM_ENTER_FAILED:
+		case CPU_PM_EXIT:
+			gic_cpu_restore(i);
+			break;
+		case CPU_CLUSTER_PM_ENTER:
+			gic_dist_save(i);
+			break;
+		case CPU_CLUSTER_PM_ENTER_FAILED:
+		case CPU_CLUSTER_PM_EXIT:
+			gic_dist_restore(i);
+			break;
+		}
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block gic_notifier_block = {
+	.notifier_call = gic_notifier,
+};
+
+static void __init gic_pm_init(struct gic_chip_data *gic)
+{
+	gic->saved_ppi_enable = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4,
+		sizeof(u32));
+	BUG_ON(!gic->saved_ppi_enable);
+
+	gic->saved_ppi_conf = __alloc_percpu(DIV_ROUND_UP(32, 16) * 4,
+		sizeof(u32));
+	BUG_ON(!gic->saved_ppi_conf);
+
+	if (gic == &gic_data[0])
+		cpu_pm_register_notifier(&gic_notifier_block);
+}
+#else
+static void __init gic_pm_init(struct gic_chip_data *gic)
+{
+}
+#endif
+
+#ifdef CONFIG_SMP
+void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
+{
+	int cpu;
+	unsigned long map = 0;
+
+	/* Convert our logical CPU mask into a physical one. */
+	for_each_cpu(cpu, mask)
+		map |= 1 << cpu_logical_map(cpu);
+
+	/*
+	 * Ensure that stores to Normal memory are visible to the
+	 * other CPUs before issuing the IPI.
+	 */
+	dsb();
+
+	/* this always happens on GIC0 */
+	writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
+}
+#endif
+
+static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
+				irq_hw_number_t hw)
+{
+	if (hw < 32) {
+		irq_set_percpu_devid(irq);
+		irq_set_chip_and_handler(irq, &gic_chip,
+					 handle_percpu_devid_irq);
+		set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN);
+	} else {
+		irq_set_chip_and_handler(irq, &gic_chip,
+					 handle_fasteoi_irq);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+	irq_set_chip_data(irq, d->host_data);
+	return 0;
+}
+
+static int gic_irq_domain_xlate(struct irq_domain *d,
+				struct device_node *controller,
+				const u32 *intspec, unsigned int intsize,
+				unsigned long *out_hwirq, unsigned int *out_type)
+{
+	if (d->of_node != controller)
+		return -EINVAL;
+	if (intsize < 3)
+		return -EINVAL;
+
+	/* Get the interrupt number and add 16 to skip over SGIs */
+	*out_hwirq = intspec[1] + 16;
+
+	/* For SPIs, we need to add 16 more to get the GIC irq ID number */
+	if (!intspec[0])
+		*out_hwirq += 16;
+
+	*out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
+	return 0;
+}
+
+const struct irq_domain_ops gic_irq_domain_ops = {
+	.map = gic_irq_domain_map,
+	.xlate = gic_irq_domain_xlate,
+};
+
+void __init gic_init_bases(unsigned int gic_nr, int irq_start,
+			   void __iomem *dist_base, void __iomem *cpu_base,
+			   u32 percpu_offset, struct device_node *node)
+{
+	irq_hw_number_t hwirq_base;
+	struct gic_chip_data *gic;
+	int gic_irqs, irq_base, i;
+
+	BUG_ON(gic_nr >= MAX_GIC_NR);
+
+	gic = &gic_data[gic_nr];
+#ifdef CONFIG_GIC_NON_BANKED
+	if (percpu_offset) { /* Frankein-GIC without banked registers... */
+		unsigned int cpu;
+
+		gic->dist_base.percpu_base = alloc_percpu(void __iomem *);
+		gic->cpu_base.percpu_base = alloc_percpu(void __iomem *);
+		if (WARN_ON(!gic->dist_base.percpu_base ||
+			    !gic->cpu_base.percpu_base)) {
+			free_percpu(gic->dist_base.percpu_base);
+			free_percpu(gic->cpu_base.percpu_base);
+			return;
+		}
+
+		for_each_possible_cpu(cpu) {
+			unsigned long offset = percpu_offset * cpu_logical_map(cpu);
+			*per_cpu_ptr(gic->dist_base.percpu_base, cpu) = dist_base + offset;
+			*per_cpu_ptr(gic->cpu_base.percpu_base, cpu) = cpu_base + offset;
+		}
+
+		gic_set_base_accessor(gic, gic_get_percpu_base);
+	} else
+#endif
+	{			/* Normal, sane GIC... */
+		WARN(percpu_offset,
+		     "GIC_NON_BANKED not enabled, ignoring %08x offset!",
+		     percpu_offset);
+		gic->dist_base.common_base = dist_base;
+		gic->cpu_base.common_base = cpu_base;
+		gic_set_base_accessor(gic, gic_get_common_base);
+	}
+
+	/*
+	 * Initialize the CPU interface map to all CPUs.
+	 * It will be refined as each CPU probes its ID.
+	 */
+	for (i = 0; i < NR_GIC_CPU_IF; i++)
+		gic_cpu_map[i] = 0xff;
+
+	/*
+	 * For primary GICs, skip over SGIs.
+	 * For secondary GICs, skip over PPIs, too.
+	 */
+	if (gic_nr == 0 && (irq_start & 31) > 0) {
+		hwirq_base = 16;
+		if (irq_start != -1)
+			irq_start = (irq_start & ~31) + 16;
+	} else {
+		hwirq_base = 32;
+	}
+
+	/*
+	 * Find out how many interrupts are supported.
+	 * The GIC only supports up to 1020 interrupt sources.
+	 */
+	gic_irqs = readl_relaxed(gic_data_dist_base(gic) + GIC_DIST_CTR) & 0x1f;
+	gic_irqs = (gic_irqs + 1) * 32;
+	if (gic_irqs > 1020)
+		gic_irqs = 1020;
+	gic->gic_irqs = gic_irqs;
+
+	gic_irqs -= hwirq_base; /* calculate # of irqs to allocate */
+	irq_base = irq_alloc_descs(irq_start, 16, gic_irqs, numa_node_id());
+	if (IS_ERR_VALUE(irq_base)) {
+		WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
+		     irq_start);
+		irq_base = irq_start;
+	}
+	gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base,
+				    hwirq_base, &gic_irq_domain_ops, gic);
+	if (WARN_ON(!gic->domain))
+		return;
+
+#ifdef CONFIG_SMP
+	set_smp_cross_call(gic_raise_softirq);
+#endif
+
+	set_handle_irq(gic_handle_irq);
+
+	gic_chip.flags |= gic_arch_extn.flags;
+	gic_dist_init(gic);
+	gic_cpu_init(gic);
+	gic_pm_init(gic);
+}
+
+void __cpuinit gic_secondary_init(unsigned int gic_nr)
+{
+	BUG_ON(gic_nr >= MAX_GIC_NR);
+
+	gic_cpu_init(&gic_data[gic_nr]);
+}
+
+#ifdef CONFIG_OF
+static int gic_cnt __initdata = 0;
+
+int __init gic_of_init(struct device_node *node, struct device_node *parent)
+{
+	void __iomem *cpu_base;
+	void __iomem *dist_base;
+	u32 percpu_offset;
+	int irq;
+
+	if (WARN_ON(!node))
+		return -ENODEV;
+
+	dist_base = of_iomap(node, 0);
+	WARN(!dist_base, "unable to map gic dist registers\n");
+
+	cpu_base = of_iomap(node, 1);
+	WARN(!cpu_base, "unable to map gic cpu registers\n");
+
+	if (of_property_read_u32(node, "cpu-offset", &percpu_offset))
+		percpu_offset = 0;
+
+	gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset, node);
+
+	if (parent) {
+		irq = irq_of_parse_and_map(node, 0);
+		gic_cascade_irq(gic_cnt, irq);
+	}
+	gic_cnt++;
+	return 0;
+}
+IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init);
+IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init);
+IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
+IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
+
+#endif
diff --git a/drivers/irqchip/irq-vic.c b/drivers/irqchip/irq-vic.c
new file mode 100644
index 00000000000..3cf97aaebe4
--- /dev/null
+++ b/drivers/irqchip/irq-vic.c
@@ -0,0 +1,489 @@
+/*
+ *  linux/arch/arm/common/vic.c
+ *
+ *  Copyright (C) 1999 - 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/syscore_ops.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/irqchip/arm-vic.h>
+
+#include <asm/exception.h>
+#include <asm/mach/irq.h>
+
+#include "irqchip.h"
+
+#define VIC_IRQ_STATUS			0x00
+#define VIC_FIQ_STATUS			0x04
+#define VIC_INT_SELECT			0x0c	/* 1 = FIQ, 0 = IRQ */
+#define VIC_INT_SOFT			0x18
+#define VIC_INT_SOFT_CLEAR		0x1c
+#define VIC_PROTECT			0x20
+#define VIC_PL190_VECT_ADDR		0x30	/* PL190 only */
+#define VIC_PL190_DEF_VECT_ADDR		0x34	/* PL190 only */
+
+#define VIC_VECT_ADDR0			0x100	/* 0 to 15 (0..31 PL192) */
+#define VIC_VECT_CNTL0			0x200	/* 0 to 15 (0..31 PL192) */
+#define VIC_ITCR			0x300	/* VIC test control register */
+
+#define VIC_VECT_CNTL_ENABLE		(1 << 5)
+
+#define VIC_PL192_VECT_ADDR		0xF00
+
+/**
+ * struct vic_device - VIC PM device
+ * @irq: The IRQ number for the base of the VIC.
+ * @base: The register base for the VIC.
+ * @valid_sources: A bitmask of valid interrupts
+ * @resume_sources: A bitmask of interrupts for resume.
+ * @resume_irqs: The IRQs enabled for resume.
+ * @int_select: Save for VIC_INT_SELECT.
+ * @int_enable: Save for VIC_INT_ENABLE.
+ * @soft_int: Save for VIC_INT_SOFT.
+ * @protect: Save for VIC_PROTECT.
+ * @domain: The IRQ domain for the VIC.
+ */
+struct vic_device {
+	void __iomem	*base;
+	int		irq;
+	u32		valid_sources;
+	u32		resume_sources;
+	u32		resume_irqs;
+	u32		int_select;
+	u32		int_enable;
+	u32		soft_int;
+	u32		protect;
+	struct irq_domain *domain;
+};
+
+/* we cannot allocate memory when VICs are initially registered */
+static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
+
+static int vic_id;
+
+static void vic_handle_irq(struct pt_regs *regs);
+
+/**
+ * vic_init2 - common initialisation code
+ * @base: Base of the VIC.
+ *
+ * Common initialisation code for registration
+ * and resume.
+*/
+static void vic_init2(void __iomem *base)
+{
+	int i;
+
+	for (i = 0; i < 16; i++) {
+		void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+		writel(VIC_VECT_CNTL_ENABLE | i, reg);
+	}
+
+	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+}
+
+#ifdef CONFIG_PM
+static void resume_one_vic(struct vic_device *vic)
+{
+	void __iomem *base = vic->base;
+
+	printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base);
+
+	/* re-initialise static settings */
+	vic_init2(base);
+
+	writel(vic->int_select, base + VIC_INT_SELECT);
+	writel(vic->protect, base + VIC_PROTECT);
+
+	/* set the enabled ints and then clear the non-enabled */
+	writel(vic->int_enable, base + VIC_INT_ENABLE);
+	writel(~vic->int_enable, base + VIC_INT_ENABLE_CLEAR);
+
+	/* and the same for the soft-int register */
+
+	writel(vic->soft_int, base + VIC_INT_SOFT);
+	writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR);
+}
+
+static void vic_resume(void)
+{
+	int id;
+
+	for (id = vic_id - 1; id >= 0; id--)
+		resume_one_vic(vic_devices + id);
+}
+
+static void suspend_one_vic(struct vic_device *vic)
+{
+	void __iomem *base = vic->base;
+
+	printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base);
+
+	vic->int_select = readl(base + VIC_INT_SELECT);
+	vic->int_enable = readl(base + VIC_INT_ENABLE);
+	vic->soft_int = readl(base + VIC_INT_SOFT);
+	vic->protect = readl(base + VIC_PROTECT);
+
+	/* set the interrupts (if any) that are used for
+	 * resuming the system */
+
+	writel(vic->resume_irqs, base + VIC_INT_ENABLE);
+	writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR);
+}
+
+static int vic_suspend(void)
+{
+	int id;
+
+	for (id = 0; id < vic_id; id++)
+		suspend_one_vic(vic_devices + id);
+
+	return 0;
+}
+
+struct syscore_ops vic_syscore_ops = {
+	.suspend	= vic_suspend,
+	.resume		= vic_resume,
+};
+
+/**
+ * vic_pm_init - initicall to register VIC pm
+ *
+ * This is called via late_initcall() to register
+ * the resources for the VICs due to the early
+ * nature of the VIC's registration.
+*/
+static int __init vic_pm_init(void)
+{
+	if (vic_id > 0)
+		register_syscore_ops(&vic_syscore_ops);
+
+	return 0;
+}
+late_initcall(vic_pm_init);
+#endif /* CONFIG_PM */
+
+static struct irq_chip vic_chip;
+
+static int vic_irqdomain_map(struct irq_domain *d, unsigned int irq,
+			     irq_hw_number_t hwirq)
+{
+	struct vic_device *v = d->host_data;
+
+	/* Skip invalid IRQs, only register handlers for the real ones */
+	if (!(v->valid_sources & (1 << hwirq)))
+		return -ENOTSUPP;
+	irq_set_chip_and_handler(irq, &vic_chip, handle_level_irq);
+	irq_set_chip_data(irq, v->base);
+	set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	return 0;
+}
+
+/*
+ * Handle each interrupt in a single VIC.  Returns non-zero if we've
+ * handled at least one interrupt.  This reads the status register
+ * before handling each interrupt, which is necessary given that
+ * handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
+ */
+static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
+{
+	u32 stat, irq;
+	int handled = 0;
+
+	while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) {
+		irq = ffs(stat) - 1;
+		handle_IRQ(irq_find_mapping(vic->domain, irq), regs);
+		handled = 1;
+	}
+
+	return handled;
+}
+
+/*
+ * Keep iterating over all registered VIC's until there are no pending
+ * interrupts.
+ */
+static asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs)
+{
+	int i, handled;
+
+	do {
+		for (i = 0, handled = 0; i < vic_id; ++i)
+			handled |= handle_one_vic(&vic_devices[i], regs);
+	} while (handled);
+}
+
+static struct irq_domain_ops vic_irqdomain_ops = {
+	.map = vic_irqdomain_map,
+	.xlate = irq_domain_xlate_onetwocell,
+};
+
+/**
+ * vic_register() - Register a VIC.
+ * @base: The base address of the VIC.
+ * @irq: The base IRQ for the VIC.
+ * @valid_sources: bitmask of valid interrupts
+ * @resume_sources: bitmask of interrupts allowed for resume sources.
+ * @node: The device tree node associated with the VIC.
+ *
+ * Register the VIC with the system device tree so that it can be notified
+ * of suspend and resume requests and ensure that the correct actions are
+ * taken to re-instate the settings on resume.
+ *
+ * This also configures the IRQ domain for the VIC.
+ */
+static void __init vic_register(void __iomem *base, unsigned int irq,
+				u32 valid_sources, u32 resume_sources,
+				struct device_node *node)
+{
+	struct vic_device *v;
+	int i;
+
+	if (vic_id >= ARRAY_SIZE(vic_devices)) {
+		printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
+		return;
+	}
+
+	v = &vic_devices[vic_id];
+	v->base = base;
+	v->valid_sources = valid_sources;
+	v->resume_sources = resume_sources;
+	v->irq = irq;
+	set_handle_irq(vic_handle_irq);
+	vic_id++;
+	v->domain = irq_domain_add_simple(node, fls(valid_sources), irq,
+					  &vic_irqdomain_ops, v);
+	/* create an IRQ mapping for each valid IRQ */
+	for (i = 0; i < fls(valid_sources); i++)
+		if (valid_sources & (1 << i))
+			irq_create_mapping(v->domain, i);
+}
+
+static void vic_ack_irq(struct irq_data *d)
+{
+	void __iomem *base = irq_data_get_irq_chip_data(d);
+	unsigned int irq = d->hwirq;
+	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+	/* moreover, clear the soft-triggered, in case it was the reason */
+	writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
+}
+
+static void vic_mask_irq(struct irq_data *d)
+{
+	void __iomem *base = irq_data_get_irq_chip_data(d);
+	unsigned int irq = d->hwirq;
+	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+}
+
+static void vic_unmask_irq(struct irq_data *d)
+{
+	void __iomem *base = irq_data_get_irq_chip_data(d);
+	unsigned int irq = d->hwirq;
+	writel(1 << irq, base + VIC_INT_ENABLE);
+}
+
+#if defined(CONFIG_PM)
+static struct vic_device *vic_from_irq(unsigned int irq)
+{
+        struct vic_device *v = vic_devices;
+	unsigned int base_irq = irq & ~31;
+	int id;
+
+	for (id = 0; id < vic_id; id++, v++) {
+		if (v->irq == base_irq)
+			return v;
+	}
+
+	return NULL;
+}
+
+static int vic_set_wake(struct irq_data *d, unsigned int on)
+{
+	struct vic_device *v = vic_from_irq(d->irq);
+	unsigned int off = d->hwirq;
+	u32 bit = 1 << off;
+
+	if (!v)
+		return -EINVAL;
+
+	if (!(bit & v->resume_sources))
+		return -EINVAL;
+
+	if (on)
+		v->resume_irqs |= bit;
+	else
+		v->resume_irqs &= ~bit;
+
+	return 0;
+}
+#else
+#define vic_set_wake NULL
+#endif /* CONFIG_PM */
+
+static struct irq_chip vic_chip = {
+	.name		= "VIC",
+	.irq_ack	= vic_ack_irq,
+	.irq_mask	= vic_mask_irq,
+	.irq_unmask	= vic_unmask_irq,
+	.irq_set_wake	= vic_set_wake,
+};
+
+static void __init vic_disable(void __iomem *base)
+{
+	writel(0, base + VIC_INT_SELECT);
+	writel(0, base + VIC_INT_ENABLE);
+	writel(~0, base + VIC_INT_ENABLE_CLEAR);
+	writel(0, base + VIC_ITCR);
+	writel(~0, base + VIC_INT_SOFT_CLEAR);
+}
+
+static void __init vic_clear_interrupts(void __iomem *base)
+{
+	unsigned int i;
+
+	writel(0, base + VIC_PL190_VECT_ADDR);
+	for (i = 0; i < 19; i++) {
+		unsigned int value;
+
+		value = readl(base + VIC_PL190_VECT_ADDR);
+		writel(value, base + VIC_PL190_VECT_ADDR);
+	}
+}
+
+/*
+ * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
+ * The original cell has 32 interrupts, while the modified one has 64,
+ * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case
+ * the probe function is called twice, with base set to offset 000
+ *  and 020 within the page. We call this "second block".
+ */
+static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
+			       u32 vic_sources, struct device_node *node)
+{
+	unsigned int i;
+	int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
+
+	/* Disable all interrupts initially. */
+	vic_disable(base);
+
+	/*
+	 * Make sure we clear all existing interrupts. The vector registers
+	 * in this cell are after the second block of general registers,
+	 * so we can address them using standard offsets, but only from
+	 * the second base address, which is 0x20 in the page
+	 */
+	if (vic_2nd_block) {
+		vic_clear_interrupts(base);
+
+		/* ST has 16 vectors as well, but we don't enable them by now */
+		for (i = 0; i < 16; i++) {
+			void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+			writel(0, reg);
+		}
+
+		writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+	}
+
+	vic_register(base, irq_start, vic_sources, 0, node);
+}
+
+void __init __vic_init(void __iomem *base, int irq_start,
+			      u32 vic_sources, u32 resume_sources,
+			      struct device_node *node)
+{
+	unsigned int i;
+	u32 cellid = 0;
+	enum amba_vendor vendor;
+
+	/* Identify which VIC cell this one is, by reading the ID */
+	for (i = 0; i < 4; i++) {
+		void __iomem *addr;
+		addr = (void __iomem *)((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
+		cellid |= (readl(addr) & 0xff) << (8 * i);
+	}
+	vendor = (cellid >> 12) & 0xff;
+	printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
+	       base, cellid, vendor);
+
+	switch(vendor) {
+	case AMBA_VENDOR_ST:
+		vic_init_st(base, irq_start, vic_sources, node);
+		return;
+	default:
+		printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
+		/* fall through */
+	case AMBA_VENDOR_ARM:
+		break;
+	}
+
+	/* Disable all interrupts initially. */
+	vic_disable(base);
+
+	/* Make sure we clear all existing interrupts */
+	vic_clear_interrupts(base);
+
+	vic_init2(base);
+
+	vic_register(base, irq_start, vic_sources, resume_sources, node);
+}
+
+/**
+ * vic_init() - initialise a vectored interrupt controller
+ * @base: iomem base address
+ * @irq_start: starting interrupt number, must be muliple of 32
+ * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
+ */
+void __init vic_init(void __iomem *base, unsigned int irq_start,
+		     u32 vic_sources, u32 resume_sources)
+{
+	__vic_init(base, irq_start, vic_sources, resume_sources, NULL);
+}
+
+#ifdef CONFIG_OF
+int __init vic_of_init(struct device_node *node, struct device_node *parent)
+{
+	void __iomem *regs;
+
+	if (WARN(parent, "non-root VICs are not supported"))
+		return -EINVAL;
+
+	regs = of_iomap(node, 0);
+	if (WARN_ON(!regs))
+		return -EIO;
+
+	/*
+	 * Passing 0 as first IRQ makes the simple domain allocate descriptors
+	 */
+	__vic_init(regs, 0, ~0, ~0, node);
+
+	return 0;
+}
+IRQCHIP_DECLARE(arm_pl190_vic, "arm,pl190-vic", vic_of_init);
+IRQCHIP_DECLARE(arm_pl192_vic, "arm,pl192-vic", vic_of_init);
+IRQCHIP_DECLARE(arm_versatile_vic, "arm,versatile-vic", vic_of_init);
+#endif /* CONFIG OF */
diff --git a/drivers/irqchip/irqchip.c b/drivers/irqchip/irqchip.c
new file mode 100644
index 00000000000..f496afce29d
--- /dev/null
+++ b/drivers/irqchip/irqchip.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2012 Thomas Petazzoni
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_irq.h>
+
+#include "irqchip.h"
+
+/*
+ * This special of_device_id is the sentinel at the end of the
+ * of_device_id[] array of all irqchips. It is automatically placed at
+ * the end of the array by the linker, thanks to being part of a
+ * special section.
+ */
+static const struct of_device_id
+irqchip_of_match_end __used __section(__irqchip_of_end);
+
+extern struct of_device_id __irqchip_begin[];
+
+void __init irqchip_init(void)
+{
+	of_irq_init(__irqchip_begin);
+}
diff --git a/drivers/irqchip/irqchip.h b/drivers/irqchip/irqchip.h
new file mode 100644
index 00000000000..e445ba2d6ad
--- /dev/null
+++ b/drivers/irqchip/irqchip.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2012 Thomas Petazzoni
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _IRQCHIP_H
+#define _IRQCHIP_H
+
+/*
+ * This macro must be used by the different irqchip drivers to declare
+ * the association between their DT compatible string and their
+ * initialization function.
+ *
+ * @name: name that must be unique accross all IRQCHIP_DECLARE of the
+ * same file.
+ * @compstr: compatible string of the irqchip driver
+ * @fn: initialization function
+ */
+#define IRQCHIP_DECLARE(name,compstr,fn)				\
+	static const struct of_device_id irqchip_of_match_##name	\
+	__used __section(__irqchip_of_table)				\
+	= { .compatible = compstr, .data = fn }
+
+#endif
diff --git a/drivers/irqchip/spear-shirq.c b/drivers/irqchip/spear-shirq.c
index 80e1d2fd9d4..8527743b5ce 100644
--- a/drivers/irqchip/spear-shirq.c
+++ b/drivers/irqchip/spear-shirq.c
@@ -25,6 +25,8 @@
 #include <linux/of_irq.h>
 #include <linux/spinlock.h>
 
+#include "irqchip.h"
+
 static DEFINE_SPINLOCK(lock);
 
 /* spear300 shared irq registers offsets and masks */
@@ -300,6 +302,7 @@ int __init spear300_shirq_of_init(struct device_node *np,
 	return shirq_init(spear300_shirq_blocks,
 			ARRAY_SIZE(spear300_shirq_blocks), np);
 }
+IRQCHIP_DECLARE(spear300_shirq, "st,spear300-shirq", spear300_shirq_of_init);
 
 int __init spear310_shirq_of_init(struct device_node *np,
 		struct device_node *parent)
@@ -307,6 +310,7 @@ int __init spear310_shirq_of_init(struct device_node *np,
 	return shirq_init(spear310_shirq_blocks,
 			ARRAY_SIZE(spear310_shirq_blocks), np);
 }
+IRQCHIP_DECLARE(spear310_shirq, "st,spear310-shirq", spear310_shirq_of_init);
 
 int __init spear320_shirq_of_init(struct device_node *np,
 		struct device_node *parent)
@@ -314,3 +318,4 @@ int __init spear320_shirq_of_init(struct device_node *np,
 	return shirq_init(spear320_shirq_blocks,
 			ARRAY_SIZE(spear320_shirq_blocks), np);
 }
+IRQCHIP_DECLARE(spear320_shirq, "st,spear320-shirq", spear320_shirq_of_init);
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 268f45d4239..1192518e1ac 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -26,22 +26,18 @@
 #include <linux/fs.h>
 #include <linux/platform_device.h>
 #include <linux/uaccess.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/dbx500-prcmu.h>
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/regulator/db8500-prcmu.h>
 #include <linux/regulator/machine.h>
 #include <linux/cpufreq.h>
-#include <asm/hardware/gic.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/db8500-regs.h>
-#include <mach/id.h>
 #include "dbx500-prcmu-regs.h"
 
-/* Offset for the firmware version within the TCPM */
-#define PRCMU_FW_VERSION_OFFSET 0xA4
-
 /* Index of different voltages to be used when accessing AVSData */
 #define PRCM_AVS_BASE		0x2FC
 #define PRCM_AVS_VBB_RET	(PRCM_AVS_BASE + 0x0)
@@ -216,10 +212,8 @@
 #define PRCM_REQ_MB5_I2C_HW_BITS	(PRCM_REQ_MB5 + 0x1)
 #define PRCM_REQ_MB5_I2C_REG		(PRCM_REQ_MB5 + 0x2)
 #define PRCM_REQ_MB5_I2C_VAL		(PRCM_REQ_MB5 + 0x3)
-#define PRCMU_I2C_WRITE(slave) \
-	(((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0))
-#define PRCMU_I2C_READ(slave) \
-	(((slave) << 1) | BIT(0) | (cpu_is_u8500v2() ? BIT(6) : 0))
+#define PRCMU_I2C_WRITE(slave) (((slave) << 1) | BIT(6))
+#define PRCMU_I2C_READ(slave) (((slave) << 1) | BIT(0) | BIT(6))
 #define PRCMU_I2C_STOP_EN		BIT(3)
 
 /* Mailbox 5 ACKs */
@@ -1049,12 +1043,13 @@ int db8500_prcmu_get_ddr_opp(void)
  *
  * This function sets the operating point of the DDR.
  */
+static bool enable_set_ddr_opp;
 int db8500_prcmu_set_ddr_opp(u8 opp)
 {
 	if (opp < DDR_100_OPP || opp > DDR_25_OPP)
 		return -EINVAL;
 	/* Changing the DDR OPP can hang the hardware pre-v21 */
-	if (cpu_is_u8500v20_or_later() && !cpu_is_u8500v20())
+	if (enable_set_ddr_opp)
 		writeb(opp, PRCM_DDR_SUBSYS_APE_MINBW);
 
 	return 0;
@@ -2706,21 +2701,43 @@ static struct irq_chip prcmu_irq_chip = {
 	.irq_unmask	= prcmu_irq_unmask,
 };
 
-static char *fw_project_name(u8 project)
+static __init char *fw_project_name(u32 project)
 {
 	switch (project) {
 	case PRCMU_FW_PROJECT_U8500:
 		return "U8500";
-	case PRCMU_FW_PROJECT_U8500_C2:
-		return "U8500 C2";
+	case PRCMU_FW_PROJECT_U8400:
+		return "U8400";
 	case PRCMU_FW_PROJECT_U9500:
 		return "U9500";
-	case PRCMU_FW_PROJECT_U9500_C2:
-		return "U9500 C2";
+	case PRCMU_FW_PROJECT_U8500_MBB:
+		return "U8500 MBB";
+	case PRCMU_FW_PROJECT_U8500_C1:
+		return "U8500 C1";
+	case PRCMU_FW_PROJECT_U8500_C2:
+		return "U8500 C2";
+	case PRCMU_FW_PROJECT_U8500_C3:
+		return "U8500 C3";
+	case PRCMU_FW_PROJECT_U8500_C4:
+		return "U8500 C4";
+	case PRCMU_FW_PROJECT_U9500_MBL:
+		return "U9500 MBL";
+	case PRCMU_FW_PROJECT_U8500_MBL:
+		return "U8500 MBL";
+	case PRCMU_FW_PROJECT_U8500_MBL2:
+		return "U8500 MBL2";
 	case PRCMU_FW_PROJECT_U8520:
-		return "U8520";
+		return "U8520 MBL";
 	case PRCMU_FW_PROJECT_U8420:
 		return "U8420";
+	case PRCMU_FW_PROJECT_U9540:
+		return "U9540";
+	case PRCMU_FW_PROJECT_A9420:
+		return "A9420";
+	case PRCMU_FW_PROJECT_L8540:
+		return "L8540";
+	case PRCMU_FW_PROJECT_L8580:
+		return "L8580";
 	default:
 		return "Unknown";
 	}
@@ -2766,36 +2783,44 @@ static int db8500_irq_init(struct device_node *np)
 	return 0;
 }
 
-void __init db8500_prcmu_early_init(void)
+static void dbx500_fw_version_init(struct platform_device *pdev,
+			    u32 version_offset)
 {
-	if (cpu_is_u8500v2() || cpu_is_u9540()) {
-		void *tcpm_base = ioremap_nocache(U8500_PRCMU_TCPM_BASE, SZ_4K);
-
-		if (tcpm_base != NULL) {
-			u32 version;
-			version = readl(tcpm_base + PRCMU_FW_VERSION_OFFSET);
-			fw_info.version.project = version & 0xFF;
-			fw_info.version.api_version = (version >> 8) & 0xFF;
-			fw_info.version.func_version = (version >> 16) & 0xFF;
-			fw_info.version.errata = (version >> 24) & 0xFF;
-			fw_info.valid = true;
-			pr_info("PRCMU firmware: %s, version %d.%d.%d\n",
-				fw_project_name(fw_info.version.project),
-				(version >> 8) & 0xFF, (version >> 16) & 0xFF,
-				(version >> 24) & 0xFF);
-			iounmap(tcpm_base);
-		}
+	struct resource *res;
+	void __iomem *tcpm_base;
 
-		if (cpu_is_u9540())
-			tcdm_base = ioremap_nocache(U8500_PRCMU_TCDM_BASE,
-						SZ_4K + SZ_8K) + SZ_8K;
-		else
-			tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE);
-	} else {
-		pr_err("prcmu: Unsupported chip version\n");
-		BUG();
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+					   "prcmu-tcpm");
+	if (!res) {
+		dev_err(&pdev->dev,
+			"Error: no prcmu tcpm memory region provided\n");
+		return;
 	}
+	tcpm_base = ioremap(res->start, resource_size(res));
+	if (tcpm_base != NULL) {
+		u32 version;
+
+		version = readl(tcpm_base + version_offset);
+		fw_info.version.project = (version & 0xFF);
+		fw_info.version.api_version = (version >> 8) & 0xFF;
+		fw_info.version.func_version = (version >> 16) & 0xFF;
+		fw_info.version.errata = (version >> 24) & 0xFF;
+		strncpy(fw_info.version.project_name,
+			fw_project_name(fw_info.version.project),
+			PRCMU_FW_PROJECT_NAME_LEN);
+		fw_info.valid = true;
+		pr_info("PRCMU firmware: %s(%d), version %d.%d.%d\n",
+			fw_info.version.project_name,
+			fw_info.version.project,
+			fw_info.version.api_version,
+			fw_info.version.func_version,
+			fw_info.version.errata);
+		iounmap(tcpm_base);
+	}
+}
 
+void __init db8500_prcmu_early_init(void)
+{
 	spin_lock_init(&mb0_transfer.lock);
 	spin_lock_init(&mb0_transfer.dbb_irqs_lock);
 	mutex_init(&mb0_transfer.ac_wake_lock);
@@ -3105,23 +3130,30 @@ static void db8500_prcmu_update_cpufreq(void)
  */
 static int db8500_prcmu_probe(struct platform_device *pdev)
 {
-	struct ab8500_platform_data *ab8500_platdata = pdev->dev.platform_data;
 	struct device_node *np = pdev->dev.of_node;
+	struct prcmu_pdata *pdata = dev_get_platdata(&pdev->dev);
 	int irq = 0, err = 0, i;
-
-	if (ux500_is_svp())
-		return -ENODEV;
+	struct resource *res;
 
 	init_prcm_registers();
 
+	dbx500_fw_version_init(pdev, pdata->version_offset);
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu-tcdm");
+	if (!res) {
+		dev_err(&pdev->dev, "no prcmu tcdm region provided\n");
+		return -ENOENT;
+	}
+	tcdm_base = devm_ioremap(&pdev->dev, res->start,
+			resource_size(res));
+
 	/* Clean up the mailbox interrupts after pre-kernel code. */
 	writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
 
-	if (np)
-		irq = platform_get_irq(pdev, 0);
-
-	if (!np || irq <= 0)
-		irq = IRQ_DB8500_PRCMU1;
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		dev_err(&pdev->dev, "no prcmu irq provided\n");
+		return -ENOENT;
+	}
 
 	err = request_threaded_irq(irq, prcmu_irq_handler,
 	        prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL);
@@ -3135,13 +3167,12 @@ static int db8500_prcmu_probe(struct platform_device *pdev)
 
 	for (i = 0; i < ARRAY_SIZE(db8500_prcmu_devs); i++) {
 		if (!strcmp(db8500_prcmu_devs[i].name, "ab8500-core")) {
-			db8500_prcmu_devs[i].platform_data = ab8500_platdata;
+			db8500_prcmu_devs[i].platform_data = pdata->ab_platdata;
 			db8500_prcmu_devs[i].pdata_size = sizeof(struct ab8500_platform_data);
 		}
 	}
 
-	if (cpu_is_u8500v20_or_later())
-		prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
+	prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
 
 	db8500_prcmu_update_cpufreq();