diff options
| author | Jouni Malinen <jouni.malinen@atheros.com> | 2009-06-16 11:59:23 +0300 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@suse.de> | 2009-07-02 16:50:18 -0700 |
| commit | 241798adc59d1d79c783bb4726f595ab97fb6595 (patch) | |
| tree | ee3d7cb03cc4bdd49babf53da52964ddee4f6ed1 /drivers | |
| parent | d0c154d59bbdca8317241e7cc51c319bf216662d (diff) | |
ath9k: Fix PCI FATAL interrupts by restoring RETRY_TIMEOUT disabling
commit f0214843ba23d9bf6dc6b8ad2c6ee27b60f0322e upstream.
An earlier commit, 'ath9k: remove dummy PCI "retry timeout" fix', removed
code that was documented to disable RETRY_TIMEOUT register (PCI reg
0x41) since it was claimed to be a no-op. However, it turns out that
there are some combinations of hosts and ath9k-supported cards for
which this is not a no-op (reg 0x41 has value 0x80, not 0) and this
code (or something similar) is needed. In such cases, the driver may
be next to unusable due to very frequent PCI FATAL interrupts from the
card.
Reverting the earlier commit, i.e., restoring the RETRY_TIMEOUT
disabling, seems to resolve the issue. Since the removal of this code
was not based on any known issue and was purely a cleanup change, the
safest option here is to just revert that commit. Should there be
desire to clean this up in the future, the change will need to be
tested with a more complete coverage of cards and host systems.
http://bugzilla.kernel.org/show_bug.cgi?id=13483
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/wireless/ath9k/pci.c | 18 |
1 files changed, 18 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath9k/pci.c b/drivers/net/wireless/ath9k/pci.c index 168411d322a..4affb49702d 100644 --- a/drivers/net/wireless/ath9k/pci.c +++ b/drivers/net/wireless/ath9k/pci.c @@ -87,6 +87,7 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) struct ath_softc *sc; struct ieee80211_hw *hw; u8 csz; + u32 val; int ret = 0; struct ath_hw *ah; @@ -133,6 +134,14 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) pci_set_master(pdev); + /* + * Disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state. + */ + pci_read_config_dword(pdev, 0x40, &val); + if ((val & 0x0000ff00) != 0) + pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); + ret = pci_request_region(pdev, 0, "ath9k"); if (ret) { dev_err(&pdev->dev, "PCI memory region reserve error\n"); @@ -244,12 +253,21 @@ static int ath_pci_resume(struct pci_dev *pdev) struct ieee80211_hw *hw = pci_get_drvdata(pdev); struct ath_wiphy *aphy = hw->priv; struct ath_softc *sc = aphy->sc; + u32 val; int err; err = pci_enable_device(pdev); if (err) return err; pci_restore_state(pdev); + /* + * Suspend/Resume resets the PCI configuration space, so we have to + * re-disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state + */ + pci_read_config_dword(pdev, 0x40, &val); + if ((val & 0x0000ff00) != 0) + pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); /* Enable LED */ ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN, |