xen/pciback: guest SR-IOV support for PV guest

These changes are for PV guest to use Virtual Function. Because the VF's
vendor, device registers in cfg space are 0xffff, which are invalid and
ignored by PCI device scan. Values in 'struct pci_dev' are fixed up by
SR-IOV code, and using these values will present correct VID and DID to
PV guest kernel.

And command registers in the cfg space are read only 0, which means we
have to emulate MMIO enable bit (VF only uses MMIO  resource) so PV
kernel can work properly.

Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

1 files changed, 66 insertions, 5 deletions

diff --git a/drivers/xen/xen-pciback/conf_space_header.c b/drivers/xen/xen-pciback/conf_space_header.c
index 40166e04a2b..dcd6dd964e3 100644
--- a/drivers/xen/xen-pciback/conf_space_header.c
+++ b/drivers/xen/xen-pciback/conf_space_header.c
@@ -18,6 +18,25 @@ struct pci_bar_info {
 #define is_enable_cmd(value) ((value)&(PCI_COMMAND_MEMORY|PCI_COMMAND_IO))
 #define is_master_cmd(value) ((value)&PCI_COMMAND_MASTER)
 
+static int command_read(struct pci_dev *dev, int offset, u16 *value, void *data)
+{
+	int i;
+	int ret;
+
+	ret = pciback_read_config_word(dev, offset, value, data);
+	if (!atomic_read(&dev->enable_cnt))
+		return ret;
+
+	for (i = 0; i < PCI_ROM_RESOURCE; i++) {
+		if (dev->resource[i].flags & IORESOURCE_IO)
+			*value |= PCI_COMMAND_IO;
+		if (dev->resource[i].flags & IORESOURCE_MEM)
+			*value |= PCI_COMMAND_MEMORY;
+	}
+
+	return ret;
+}
+
 static int command_write(struct pci_dev *dev, int offset, u16 value, void *data)
 {
 	int err;
@@ -142,10 +161,26 @@ static inline void read_dev_bar(struct pci_dev *dev,
 				struct pci_bar_info *bar_info, int offset,
 				u32 len_mask)
 {
-	pci_read_config_dword(dev, offset, &bar_info->val);
-	pci_write_config_dword(dev, offset, len_mask);
-	pci_read_config_dword(dev, offset, &bar_info->len_val);
-	pci_write_config_dword(dev, offset, bar_info->val);
+	int	pos;
+	struct resource	*res = dev->resource;
+
+	if (offset == PCI_ROM_ADDRESS || offset == PCI_ROM_ADDRESS1)
+		pos = PCI_ROM_RESOURCE;
+	else {
+		pos = (offset - PCI_BASE_ADDRESS_0) / 4;
+		if (pos && ((res[pos - 1].flags & (PCI_BASE_ADDRESS_SPACE |
+				PCI_BASE_ADDRESS_MEM_TYPE_MASK)) ==
+			   (PCI_BASE_ADDRESS_SPACE_MEMORY |
+				PCI_BASE_ADDRESS_MEM_TYPE_64))) {
+			bar_info->val = res[pos - 1].start >> 32;
+			bar_info->len_val = res[pos - 1].end >> 32;
+			return;
+		}
+	}
+
+	bar_info->val = res[pos].start |
+			(res[pos].flags & PCI_REGION_FLAG_MASK);
+	bar_info->len_val = res[pos].end - res[pos].start + 1;
 }
 
 static void *bar_init(struct pci_dev *dev, int offset)
@@ -186,6 +221,22 @@ static void bar_release(struct pci_dev *dev, int offset, void *data)
 	kfree(data);
 }
 
+static int pciback_read_vendor(struct pci_dev *dev, int offset,
+			       u16 *value, void *data)
+{
+	*value = dev->vendor;
+
+	return 0;
+}
+
+static int pciback_read_device(struct pci_dev *dev, int offset,
+			       u16 *value, void *data)
+{
+	*value = dev->device;
+
+	return 0;
+}
+
 static int interrupt_read(struct pci_dev *dev, int offset, u8 * value,
 			  void *data)
 {
@@ -213,9 +264,19 @@ out:
 
 static const struct config_field header_common[] = {
 	{
+	 .offset    = PCI_VENDOR_ID,
+	 .size      = 2,
+	 .u.w.read  = pciback_read_vendor,
+	},
+	{
+	 .offset    = PCI_DEVICE_ID,
+	 .size      = 2,
+	 .u.w.read  = pciback_read_device,
+	},
+	{
 	 .offset    = PCI_COMMAND,
 	 .size      = 2,
-	 .u.w.read  = pciback_read_config_word,
+	 .u.w.read  = command_read,
 	 .u.w.write = command_write,
 	},
 	{