diff options
author | Pete Popov <ppopov@embeddedalley.com> | 2005-04-04 01:06:19 +0000 |
---|---|---|
committer | Ralf Baechle <ralf@linux-mips.org> | 2005-10-29 19:31:01 +0100 |
commit | 3b495f2bb749b828499135743b9ddec46e34fda8 (patch) | |
tree | 5f787ed9829ef01a457428114ccd3547cf6c88da /drivers/video | |
parent | 172546bf601356f94f8018af7908a9b7c1c4915c (diff) |
Au1100 FB driver uplift for 2.6.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Antonino Daplas <adaplas@pol.net>
Diffstat (limited to 'drivers/video')
-rw-r--r-- | drivers/video/Makefile | 2 | ||||
-rw-r--r-- | drivers/video/au1100fb.c | 971 | ||||
-rw-r--r-- | drivers/video/au1100fb.h | 614 |
3 files changed, 810 insertions, 777 deletions
diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 1fff29f48ca..97c5d03ac8d 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -86,7 +86,7 @@ obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o obj-$(CONFIG_FB_PXA) += pxafb.o obj-$(CONFIG_FB_W100) += w100fb.o -obj-$(CONFIG_FB_AU1100) += au1100fb.o fbgen.o +obj-$(CONFIG_FB_AU1100) += au1100fb.o obj-$(CONFIG_FB_PMAG_AA) += pmag-aa-fb.o obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c index b6fe30c3ad6..a5129806172 100644 --- a/drivers/video/au1100fb.c +++ b/drivers/video/au1100fb.c @@ -2,6 +2,11 @@ * BRIEF MODULE DESCRIPTION * Au1100 LCD Driver. * + * Rewritten for 2.6 by Embedded Alley Solutions + * <source@embeddedalley.com>, based on submissions by + * Karl Lessard <klessard@sunrisetelecom.com> + * <c.pellegrin@exadron.com> + * * Copyright 2002 MontaVista Software * Author: MontaVista Software, Inc. * ppopov@mvista.com or source@mvista.com @@ -33,298 +38,253 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ - +#include <linux/config.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/errno.h> #include <linux/string.h> #include <linux/mm.h> -#include <linux/tty.h> -#include <linux/slab.h> -#include <linux/delay.h> #include <linux/fb.h> #include <linux/init.h> -#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/ctype.h> +#include <linux/dma-mapping.h> -#include <asm/au1000.h> -#include <asm/pb1100.h> -#include "au1100fb.h" +#include <asm/mach-au1x00/au1000.h> -#include <video/fbcon.h> -#include <video/fbcon-mfb.h> -#include <video/fbcon-cfb2.h> -#include <video/fbcon-cfb4.h> -#include <video/fbcon-cfb8.h> -#include <video/fbcon-cfb16.h> +#define DEBUG 0 + +#include "au1100fb.h" /* * Sanity check. If this is a new Au1100 based board, search for * the PB1100 ifdefs to make sure you modify the code accordingly. */ -#if defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_HYDROGEN3) +#if defined(CONFIG_MIPS_PB1100) + #include <asm/mach-pb1x00/pb1100.h> +#elif defined(CONFIG_MIPS_DB1100) + #include <asm/mach-db1x00/db1x00.h> #else -error Unknown Au1100 board + #error "Unknown Au1100 board, Au1100 FB driver not supported" #endif -#define CMAPSIZE 16 - -static int my_lcd_index; /* default is zero */ -struct known_lcd_panels *p_lcd; -AU1100_LCD *p_lcd_reg = (AU1100_LCD *)AU1100_LCD_ADDR; - -struct au1100fb_info { - struct fb_info_gen gen; - unsigned long fb_virt_start; - unsigned long fb_size; - unsigned long fb_phys; - int mmaped; - int nohwcursor; +#define DRIVER_NAME "au1100fb" +#define DRIVER_DESC "LCD controller driver for AU1100 processors" - struct { unsigned red, green, blue, pad; } palette[256]; +#define to_au1100fb_device(_info) \ + (_info ? container_of(_info, struct au1100fb_device, info) : NULL); -#if defined(FBCON_HAS_CFB16) - u16 fbcon_cmap16[16]; -#endif +/* Bitfields format supported by the controller. Note that the order of formats + * SHOULD be the same as in the LCD_CONTROL_SBPPF field, so we can retrieve the + * right pixel format by doing rgb_bitfields[LCD_CONTROL_SBPPF_XXX >> LCD_CONTROL_SBPPF] + */ +struct fb_bitfield rgb_bitfields[][4] = +{ + /* Red, Green, Blue, Transp */ + { { 10, 6, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 0, 0, 0 } }, + { { 11, 5, 0 }, { 5, 6, 0 }, { 0, 5, 0 }, { 0, 0, 0 } }, + { { 11, 5, 0 }, { 6, 5, 0 }, { 0, 6, 0 }, { 0, 0, 0 } }, + { { 10, 5, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 15, 1, 0 } }, + { { 11, 5, 0 }, { 6, 5, 0 }, { 1, 5, 0 }, { 0, 1, 0 } }, + + /* The last is used to describe 12bpp format */ + { { 8, 4, 0 }, { 4, 4, 0 }, { 0, 4, 0 }, { 0, 0, 0 } }, }; - -struct au1100fb_par { - struct fb_var_screeninfo var; - - int line_length; // in bytes - int cmap_len; // color-map length +static struct fb_fix_screeninfo au1100fb_fix __initdata = { + .id = "AU1100 FB", + .xpanstep = 1, + .ypanstep = 1, + .type = FB_TYPE_PACKED_PIXELS, + .accel = FB_ACCEL_NONE, }; - -static struct au1100fb_info fb_info; -static struct au1100fb_par current_par; -static struct display disp; - -int au1100fb_init(void); -void au1100fb_setup(char *options, int *ints); -static int au1100fb_mmap(struct fb_info *fb, struct file *file, - struct vm_area_struct *vma); -static int au1100_blank(int blank_mode, struct fb_info_gen *info); -static int au1100fb_ioctl(struct inode *inode, struct file *file, u_int cmd, - u_long arg, int con, struct fb_info *info); - -void au1100_nocursor(struct display *p, int mode, int xx, int yy){}; - -static struct fb_ops au1100fb_ops = { - .owner = THIS_MODULE, - .fb_get_fix = fbgen_get_fix, - .fb_get_var = fbgen_get_var, - .fb_set_var = fbgen_set_var, - .fb_get_cmap = fbgen_get_cmap, - .fb_set_cmap = fbgen_set_cmap, - .fb_pan_display = fbgen_pan_display, - .fb_ioctl = au1100fb_ioctl, - .fb_mmap = au1100fb_mmap, +static struct fb_var_screeninfo au1100fb_var __initdata = { + .activate = FB_ACTIVATE_NOW, + .height = -1, + .width = -1, + .vmode = FB_VMODE_NONINTERLACED, }; -static void au1100_detect(void) -{ - /* - * This function should detect the current video mode settings - * and store it as the default video mode - */ +static struct au1100fb_drv_info drv_info; - /* - * Yeh, well, we're not going to change any settings so we're - * always stuck with the default ... +/* + * Set hardware with var settings. This will enable the controller with a specific + * mode, normally validated with the fb_check_var method */ - -} - -static int au1100_encode_fix(struct fb_fix_screeninfo *fix, - const void *_par, struct fb_info_gen *_info) +int au1100fb_setmode(struct au1100fb_device *fbdev) { - struct au1100fb_info *info = (struct au1100fb_info *) _info; - struct au1100fb_par *par = (struct au1100fb_par *) _par; - struct fb_var_screeninfo *var = &par->var; - - memset(fix, 0, sizeof(struct fb_fix_screeninfo)); - - fix->smem_start = info->fb_phys; - fix->smem_len = info->fb_size; - fix->type = FB_TYPE_PACKED_PIXELS; - fix->type_aux = 0; - fix->visual = (var->bits_per_pixel == 8) ? - FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; - fix->ywrapstep = 0; - fix->xpanstep = 1; - fix->ypanstep = 1; - fix->line_length = current_par.line_length; - return 0; -} + struct fb_info *info = &fbdev->info; + u32 words; + int index; -static void set_color_bitfields(struct fb_var_screeninfo *var) -{ - switch (var->bits_per_pixel) { - case 8: - var->red.offset = 0; - var->red.length = 8; - var->green.offset = 0; - var->green.length = 8; - var->blue.offset = 0; - var->blue.length = 8; - var->transp.offset = 0; - var->transp.length = 0; - break; - case 16: /* RGB 565 */ - var->red.offset = 11; - var->red.length = 5; - var->green.offset = 5; - var->green.length = 6; - var->blue.offset = 0; - var->blue.length = 5; - var->transp.offset = 0; - var->transp.length = 0; - break; + if (!fbdev) + return -EINVAL; + + /* Update var-dependent FB info */ + if (panel_is_active(fbdev->panel) || panel_is_color(fbdev->panel)) { + if (info->var.bits_per_pixel <= 8) { + /* palettized */ + info->var.red.offset = 0; + info->var.red.length = info->var.bits_per_pixel; + info->var.red.msb_right = 0; + + info->var.green.offset = 0; + info->var.green.length = info->var.bits_per_pixel; + info->var.green.msb_right = 0; + + info->var.blue.offset = 0; + info->var.blue.length = info->var.bits_per_pixel; + info->var.blue.msb_right = 0; + + info->var.transp.offset = 0; + info->var.transp.length = 0; + info->var.transp.msb_right = 0; + + info->fix.visual = FB_VISUAL_PSEUDOCOLOR; + info->fix.line_length = info->var.xres_virtual / + (8/info->var.bits_per_pixel); + } else { + /* non-palettized */ + index = (fbdev->panel->control_base & LCD_CONTROL_SBPPF_MASK) >> LCD_CONTROL_SBPPF_BIT; + info->var.red = rgb_bitfields[index][0]; + info->var.green = rgb_bitfields[index][1]; + info->var.blue = rgb_bitfields[index][2]; + info->var.transp = rgb_bitfields[index][3]; + + info->fix.visual = FB_VISUAL_TRUECOLOR; + info->fix.line_length = info->var.xres_virtual << 1; /* depth=16 */ + } + } else { + /* mono */ + info->fix.visual = FB_VISUAL_MONO10; + info->fix.line_length = info->var.xres_virtual / 8; } - var->red.msb_right = 0; - var->green.msb_right = 0; - var->blue.msb_right = 0; - var->transp.msb_right = 0; -} + info->screen_size = info->fix.line_length * info->var.yres_virtual; -static int au1100_decode_var(const struct fb_var_screeninfo *var, - void *_par, struct fb_info_gen *_info) -{ + /* Determine BPP mode and format */ + fbdev->regs->lcd_control = fbdev->panel->control_base | + ((info->var.rotate/90) << LCD_CONTROL_SM_BIT); - struct au1100fb_par *par = (struct au1100fb_par *)_par; + fbdev->regs->lcd_intenable = 0; + fbdev->regs->lcd_intstatus = 0; - /* - * Don't allow setting any of these yet: xres and yres don't - * make sense for LCD panels. - */ - if (var->xres != p_lcd->xres || - var->yres != p_lcd->yres || - var->xres != p_lcd->xres || - var->yres != p_lcd->yres) { - return -EINVAL; - } - if(var->bits_per_pixel != p_lcd->bpp) { - return -EINVAL; - } + fbdev->regs->lcd_horztiming = fbdev->panel->horztiming; - memset(par, 0, sizeof(struct au1100fb_par)); - par->var = *var; - - /* FIXME */ - switch (var->bits_per_pixel) { - case 8: - par->var.bits_per_pixel = 8; - break; - case 16: - par->var.bits_per_pixel = 16; - break; - default: - printk("color depth %d bpp not supported\n", - var->bits_per_pixel); - return -EINVAL; + fbdev->regs->lcd_verttiming = fbdev->panel->verttiming; + + fbdev->regs->lcd_clkcontrol = fbdev->panel->clkcontrol_base; + fbdev->regs->lcd_dmaaddr0 = LCD_DMA_SA_N(fbdev->fb_phys); + + if (panel_is_dual(fbdev->panel)) { + /* Second panel display seconf half of screen if possible, + * otherwise display the same as the first panel */ + if (info->var.yres_virtual >= (info->var.yres << 1)) { + fbdev->regs->lcd_dmaaddr1 = LCD_DMA_SA_N(fbdev->fb_phys + + (info->fix.line_length * + (info->var.yres_virtual >> 1))); + } else { + fbdev->regs->lcd_dmaaddr1 = LCD_DMA_SA_N(fbdev->fb_phys); + } } - set_color_bitfields(&par->var); - par->cmap_len = (par->var.bits_per_pixel == 8) ? 256 : 16; - return 0; -} -static int au1100_encode_var(struct fb_var_screeninfo *var, - const void *par, struct fb_info_gen *_info) -{ + words = info->fix.line_length / sizeof(u32); + if (!info->var.rotate || (info->var.rotate == 180)) { + words *= info->var.yres_virtual; + if (info->var.rotate /* 180 */) { + words -= (words % 8); /* should be divisable by 8 */ + } + } + fbdev->regs->lcd_words = LCD_WRD_WRDS_N(words); - *var = ((struct au1100fb_par *)par)->var; - return 0; -} + fbdev->regs->lcd_pwmdiv = 0; + fbdev->regs->lcd_pwmhi = 0; -static void -au1100_get_par(void *_par, struct fb_info_gen *_info) -{ - *(struct au1100fb_par *)_par = current_par; -} + /* Resume controller */ + fbdev->regs->lcd_control |= LCD_CONTROL_GO; -static void au1100_set_par(const void *par, struct fb_info_gen *info) -{ - /* nothing to do: we don't change any settings */ + return 0; } -static int au1100_getcolreg(unsigned regno, unsigned *red, unsigned *green, - unsigned *blue, unsigned *transp, - struct fb_info *info) +/* fb_setcolreg + * Set color in LCD palette. + */ +int au1100fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *fbi) { + struct au1100fb_device *fbdev = to_au1100fb_device(fbi); + u32 *palette = fbdev->regs->lcd_pallettebase; + u32 value; - struct au1100fb_info* i = (struct au1100fb_info*)info; - - if (regno > 255) - return 1; + if (regno > (AU1100_LCD_NBR_PALETTE_ENTRIES - 1)) + return -EINVAL; - *red = i->palette[regno].red; - *green = i->palette[regno].green; - *blue = i->palette[regno].blue; - *transp = 0; + if (fbi->var.grayscale) { + /* Convert color to grayscale */ + red = green = blue = + (19595 * red + 38470 * green + 7471 * blue) >> 16; + } - return 0; -} + if (fbi->fix.visual == FB_VISUAL_TRUECOLOR) { + /* Place color in the pseudopalette */ + if (regno > 16) + return -EINVAL; -static int au1100_setcolreg(unsigned regno, unsigned red, unsigned green, - unsigned blue, unsigned transp, - struct fb_info *info) -{ - struct au1100fb_info* i = (struct au1100fb_info *)info; - u32 rgbcol; - - if (regno > 255) - return 1; - - i->palette[regno].red = red; - i->palette[regno].green = green; - i->palette[regno].blue = blue; - - switch(p_lcd->bpp) { -#ifdef FBCON_HAS_CFB8 - case 8: - red >>= 10; - green >>= 10; - blue >>= 10; - p_lcd_reg->lcd_pallettebase[regno] = (blue&0x1f) | - ((green&0x3f)<<5) | ((red&0x1f)<<11); - break; -#endif -#ifdef FBCON_HAS_CFB16 - case 16: - i->fbcon_cmap16[regno] = - ((red & 0xf800) >> 0) | - ((green & 0xfc00) >> 5) | - ((blue & 0xf800) >> 11); - break; -#endif - default: - break; + palette = (u32*)fbi->pseudo_palette; + + red >>= (16 - fbi->var.red.length); + green >>= (16 - fbi->var.green.length); + blue >>= (16 - fbi->var.blue.length); + + value = (red << fbi->var.red.offset) | + (green << fbi->var.green.offset)| + (blue << fbi->var.blue.offset); + value &= 0xFFFF; + + } else if (panel_is_active(fbdev->panel)) { + /* COLOR TFT PALLETTIZED (use RGB 565) */ + value = (red & 0xF800)|((green >> 5) & 0x07E0)|((blue >> 11) & 0x001F); + value &= 0xFFFF; + + } else if (panel_is_color(fbdev->panel)) { + /* COLOR STN MODE */ + value = (((panel_swap_rgb(fbdev->panel) ? blue : red) >> 12) & 0x000F) | + ((green >> 8) & 0x00F0) | + (((panel_swap_rgb(fbdev->panel) ? red : blue) >> 4) & 0x0F00); + value &= 0xFFF; + } else { + /* MONOCHROME MODE */ + value = (green >> 12) & 0x000F; + value &= 0xF; } + palette[regno] = value; + return 0; } - -static int au1100_blank(int blank_mode, struct fb_info_gen *_info) +/* fb_blank + * Blank the screen. Depending on the mode, the screen will be + * activated with the backlight color, or desactivated + */ +int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi) { + struct au1100fb_device *fbdev = to_au1100fb_device(fbi); + + print_dbg("fb_blank %d %p", blank_mode, fbi); switch (blank_mode) { + case VESA_NO_BLANKING: - /* turn on panel */ - //printk("turn on panel\n"); + /* Turn on panel */ + fbdev->regs->lcd_control |= LCD_CONTROL_GO; #ifdef CONFIG_MIPS_PB1100 - p_lcd_reg->lcd_control |= LCD_CONTROL_GO; - au_writew(au_readw(PB1100_G_CONTROL) | p_lcd->mode_backlight, + if (drv_info.panel_idx == 1) { + au_writew(au_readw(PB1100_G_CONTROL) + | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD), PB1100_G_CONTROL); -#endif -#ifdef CONFIG_MIPS_HYDROGEN3 - /* Turn controller & power supply on, GPIO213 */ - au_writel(0x20002000, 0xB1700008); - au_writel(0x00040000, 0xB1900108); - au_writel(0x01000100, 0xB1700008); + } #endif au_sync(); break; @@ -332,12 +292,14 @@ static int au1100_blank(int blank_mode, struct fb_info_gen *_info) case VESA_VSYNC_SUSPEND: case VESA_HSYNC_SUSPEND: case VESA_POWERDOWN: - /* turn off panel */ - //printk("turn off panel\n"); + /* Turn off panel */ + fbdev->regs->lcd_control &= ~LCD_CONTROL_GO; #ifdef CONFIG_MIPS_PB1100 - au_writew(au_readw(PB1100_G_CONTROL) & ~p_lcd->mode_backlight, + if (drv_info.panel_idx == 1) { + au_writew(au_readw(PB1100_G_CONTROL) + & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD), PB1100_G_CONTROL); - p_lcd_reg->lcd_control &= ~LCD_CONTROL_GO; + } #endif au_sync(); break; @@ -348,49 +310,87 @@ static int au1100_blank(int blank_mode, struct fb_info_gen *_info) return 0; } -static void au1100_set_disp(const void *unused, struct display *disp, - struct fb_info_gen *info) +/* fb_pan_display + * Pan display in x and/or y as specified + */ +int au1100fb_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fbi) { - disp->screen_base = (char *)fb_info.fb_virt_start; - - switch (disp->var.bits_per_pixel) { -#ifdef FBCON_HAS_CFB8 - case 8: - disp->dispsw = &fbcon_cfb8; - if (fb_info.nohwcursor) - fbcon_cfb8.cursor = au1100_nocursor; - break; -#endif -#ifdef FBCON_HAS_CFB16 - case 16: - disp->dispsw = &fbcon_cfb16; - disp->dispsw_data = fb_info.fbcon_cmap16; - if (fb_info.nohwcursor) - fbcon_cfb16.cursor = au1100_nocursor; - break; -#endif - default: - disp->dispsw = &fbcon_dummy; - disp->dispsw_data = NULL; - break; + struct au1100fb_device *fbdev = to_au1100fb_device(fbi); + int dy; + + print_dbg("fb_pan_display %p %p", var, fbi); + + if (!var || !fbdev) { + return -EINVAL; + } + + if (var->xoffset - fbi->var.xoffset) { + /* No support for X panning for now! */ + return -EINVAL; + } + + print_dbg("fb_pan_display 2 %p %p", var, fbi); + dy = var->yoffset - fbi->var.yoffset; + if (dy) { + + u32 dmaaddr; + + print_dbg("Panning screen of %d lines", dy); + + dmaaddr = fbdev->regs->lcd_dmaaddr0; + dmaaddr += (fbi->fix.line_length * dy); + + /* TODO: Wait for current frame to finished */ + fbdev->regs->lcd_dmaaddr0 = LCD_DMA_SA_N(dmaaddr); + + if (panel_is_dual(fbdev->panel)) { + dmaaddr = fbdev->regs->lcd_dmaaddr1; + dmaaddr += (fbi->fix.line_length * dy); + fbdev->regs->lcd_dmaaddr0 = LCD_DMA_SA_N(dmaaddr); + } + } + print_dbg("fb_pan_display 3 %p %p", var, fbi); + + return 0; +} + +/* fb_rotate + * Rotate the display of this angle. This doesn't seems to be used by the core, + * but as our hardware supports it, so why not implementing it... + */ +void au1100fb_fb_rotate(struct fb_info *fbi, int angle) +{ + struct au1100fb_device *fbdev = to_au1100fb_device(fbi); + + print_dbg("fb_rotate %p %d", fbi, angle); + + if (fbdev && (angle > 0) && !(angle % 90)) { + + fbdev->regs->lcd_control &= ~LCD_CONTROL_GO; + + fbdev->regs->lcd_control &= ~(LCD_CONTROL_SM_MASK); + fbdev->regs->lcd_control |= ((angle/90) << LCD_CONTROL_SM_BIT); + + fbdev->regs->lcd_control |= LCD_CONTROL_GO; } } -static int -au1100fb_mmap(struct fb_info *_fb, - struct file *file, - struct vm_area_struct *vma) +/* fb_mmap + * Map video memory in user space. We don't use the generic fb_mmap method mainly + * to allow the use of the TLB streaming flag (CCA=6) + */ +int au1100fb_fb_mmap(struct fb_info *fbi, struct file *file, struct vm_area_struct *vma) { + struct au1100fb_device *fbdev = to_au1100fb_device(fbi); unsigned int len; unsigned long start=0, off; - struct au1100fb_info *fb = (struct au1100fb_info *)_fb; if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) { return -EINVAL; } - start = fb_info.fb_phys & PAGE_MASK; - len = PAGE_ALIGN((start & ~PAGE_MASK) + fb_info.fb_size); + start = fbdev->fb_phys & PAGE_MASK; + len = PAGE_ALIGN((start & ~PAGE_MASK) + fbdev->fb_len); off = vma->vm_pgoff << PAGE_SHIFT; @@ -401,276 +401,309 @@ au1100fb_mmap(struct fb_info *_fb, off += start; vma->vm_pgoff = off >> PAGE_SHIFT; - pgprot_val(vma->vm_page_prot) &= ~_CACHE_MASK; - //pgprot_val(vma->vm_page_prot) |= _CACHE_CACHABLE_NONCOHERENT; + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); pgprot_val(vma->vm_page_prot) |= (6 << 9); //CCA=6 - /* This is an IO map - tell maydump to skip this VMA */ vma->vm_flags |= VM_IO; - if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, + if (io_remap_page_range(vma, vma->vm_start, off, vma->vm_end - vma->vm_start, vma->vm_page_prot)) { return -EAGAIN; } - fb->mmaped = 1; return 0; } -int au1100_pan_display(const struct fb_var_screeninfo *var, - struct fb_info_gen *info) +static struct fb_ops au1100fb_ops = { - return 0; -} + .owner = THIS_MODULE, + .fb_setcolreg = au1100fb_fb_setcolreg, + .fb_blank = au1100fb_fb_blank, + .fb_pan_display = au1100fb_fb_pan_display, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, + .fb_rotate = au1100fb_fb_rotate, + .fb_mmap = au1100fb_fb_mmap, +}; -static int au1100fb_ioctl(struct inode *inode, struct file *file, u_int cmd, - u_long arg, int con, struct fb_info *info) -{ - /* nothing to do yet */ - return -EINVAL; -} -static struct fbgen_hwswitch au1100_switch = { - au1100_detect, - au1100_encode_fix, - au1100_decode_var, - au1100_encode_var, - au1100_get_par, - au1100_set_par, - au1100_getcolreg, - au1100_setcolreg, - au1100_pan_display, - au1100_blank, - au1100_set_disp -}; +/*-------------------------------------------------------------------------*/ +/* AU1100 LCD controller device driver */ -int au1100_setmode(void) +int au1100fb_drv_probe(struct device *dev) { - int words; - - /* FIXME Need to accomodate for swivel mode and 12bpp, <8bpp*/ - switch (p_lcd->mode_control & LCD_CONTROL_SM) - { - case LCD_CONTROL_SM_0: - case LCD_CONTROL_SM_180: - words = (p_lcd->xres * p_lcd->yres * p_lcd->bpp) / 32; - break; - case LCD_CONTROL_SM_90: - case LCD_CONTROL_SM_270: - /* is this correct? */ - words = (p_lcd->xres * p_lcd->bpp) / 8; - break; - default: - printk("mode_control reg not initialized\n"); + struct au1100fb_device *fbdev = NULL; + struct resource *regs_res; + unsigned long page; + u32 sys_clksrc; + + if (!dev) return -EINVAL; + + /* Allocate new device private */ + if (!(fbdev = kmalloc(sizeof(struct au1100fb_device), GFP_KERNEL))) { + print_err("fail to allocate device private record"); + return -ENOMEM; } + memset((void*)fbdev, 0, sizeof(struct au1100fb_device)); - /* - * Setup LCD controller - */ + fbdev->panel = &known_lcd_panels[drv_info.panel_idx]; - p_lcd_reg->lcd_control = p_lcd->mode_control; - p_lcd_reg->lcd_intstatus = 0; - p_lcd_reg->lcd_intenable = 0; - p_lcd_reg->lcd_horztiming = p_lcd->mode_horztiming; - p_lcd_reg->lcd_verttiming = p_lcd->mode_verttiming; - p_lcd_reg->lcd_clkcontrol = p_lcd->mode_clkcontrol; - p_lcd_reg->lcd_words = words - 1; - p_lcd_reg->lcd_dmaaddr0 = fb_info.fb_phys; + dev_set_drvdata(dev, (void*)fbdev); - /* turn on panel */ -#ifdef CONFIG_MIPS_PB1100 - au_writew(au_readw(PB1100_G_CONTROL) | p_lcd->mode_backlight, - PB1100_G_CONTROL); -#endif -#ifdef CONFIG_MIPS_HYDROGEN3 - /* Turn controller & power supply on, GPIO213 */ - au_writel(0x20002000, 0xB1700008); - au_writel(0x00040000, 0xB1900108); - au_writel(0x01000100, 0xB1700008); -#endif + /* Allocate region for our registers and map them */ + if (!(regs_res = platform_get_resource(to_platform_device(dev), + IORESOURCE_MEM, 0))) { + print_err("fail to retrieve registers resource"); + return -EFAULT; + } - p_lcd_reg->lcd_control |= LCD_CONTROL_GO; + au1100fb_fix.mmio_start = regs_res->start; + au1100fb_fix.mmio_len = regs_res->end - regs_res->start + 1; - return 0; -} + if (!request_mem_region(au1100fb_fix.mmio_start, au1100fb_fix.mmio_len, + DRIVER_NAME)) { + print_err("fail to lock memory region at 0x%08x", + au1100fb_fix.mmio_start); + return -EBUSY; + } + fbdev->regs = (struct au1100fb_regs*)KSEG1ADDR(au1100fb_fix.mmio_start); -int __init au1100fb_init(void) -{ - uint32 sys_clksrc; - unsigned long page; + print_dbg("Register memory map at %p", fbdev->regs); + print_dbg("phys=0x%08x, size=%d", fbdev->regs_phys, fbdev->regs_len); - /* - * Get the panel information/display mode and update the registry - */ - p_lcd = &panels[my_lcd_index]; - - switch (p_lcd->mode_control & LCD_CONTROL_SM) - { - case LCD_CONTROL_SM_0: - case LCD_CONTROL_SM_180: - p_lcd->xres = - (p_lcd->mode_horztiming & LCD_HORZTIMING_PPL) + 1; - p_lcd->yres = - (p_lcd->mode_verttiming & LCD_VERTTIMING_LPP) + 1; - break; - case LCD_CONTROL_SM_90: - case LCD_CONTROL_SM_270: - p_lcd->yres = - (p_lcd->mode_horztiming & LCD_HORZTIMING_PPL) + 1; - p_lcd->xres = - (p_lcd->mode_verttiming & LCD_VERTTIMING_LPP) + 1; - break; - } - /* - * Panel dimensions x bpp must be divisible by 32 - */ - if (((p_lcd->yres * p_lcd->bpp) % 32) != 0) - printk("VERT %% 32\n"); - if (((p_lcd->xres * p_lcd->bpp) % 32) != 0) - printk("HORZ %% 32\n"); - /* - * Allocate LCD framebuffer from system memory - */ - fb_info.fb_size = (p_lcd->xres * p_lcd->yres * p_lcd->bpp) / 8; - - current_par.var.xres = p_lcd->xres; - current_par.var.xres_virtual = p_lcd->xres; - current_par.var.yres = p_lcd->yres; - current_par.var.yres_virtual = p_lcd->yres; - current_par.var.bits_per_pixel = p_lcd->bpp; - - /* FIX!!! only works for 8/16 bpp */ - current_par.line_length = p_lcd->xres * p_lcd->bpp / 8; /* in bytes */ - fb_info.fb_virt_start = (unsigned long ) - __get_free_pages(GFP_ATOMIC | GFP_DMA, - get_order(fb_info.fb_size + 0x1000)); - if (!fb_info.fb_virt_start) { - printk("Unable to allocate fb memory\n"); + /* Allocate the framebuffer to the maximum screen size * nbr of video buffers */ + fbdev->fb_len = fbdev->panel->xres * fbdev->panel->yres * + (fbdev->panel->bpp >> 3) * AU1100FB_NBR_VIDEO_BUFFERS; + + fbdev->fb_mem = dma_alloc_coherent(dev, PAGE_ALIGN(fbdev->fb_len), + &fbdev->fb_phys, GFP_KERNEL); + if (!fbdev->fb_mem) { + print_err("fail to allocate frambuffer (size: %dK))", + fbdev->fb_len / 1024); return -ENOMEM; } - fb_info.fb_phys = virt_to_bus((void *)fb_info.fb_virt_start); + + au1100fb_fix.smem_start = fbdev->fb_phys; + au1100fb_fix.smem_len = fbdev->fb_len; /* * Set page reserved so that mmap will work. This is necessary * since we'll be remapping normal memory. */ - for (page = fb_info.fb_virt_start; - page < PAGE_ALIGN(fb_info.fb_virt_start + fb_info.fb_size); + for (page = (unsigned long)fbdev->fb_mem; + page < PAGE_ALIGN((unsigned long)fbdev->fb_mem + fbdev->fb_len); page += PAGE_SIZE) { +#if CONFIG_DMA_NONCOHERENT + SetPageReserved(virt_to_page(CAC_ADDR(page))); +#else SetPageReserved(virt_to_page(page)); +#endif } - memset((void *)fb_info.fb_virt_start, 0, fb_info.fb_size); - - /* set freqctrl now to allow more time to stabilize */ - /* zero-out out LCD bits */ - sys_clksrc = au_readl(SYS_CLKSRC) & ~0x000003e0; - sys_clksrc |= p_lcd->mode_toyclksrc; - au_writel(sys_clksrc, SYS_CLKSRC); - - /* FIXME add check to make sure auxpll is what is expected! */ - au1100_setmode(); - - fb_info.gen.parsize = sizeof(struct au1100fb_par); - fb_info.gen.fbhw = &au1100_switch; - - strcpy(fb_info.gen.info.modename, "Au1100 LCD"); - fb_info.gen.info.changevar = NULL; - fb_info.gen.info.node = -1; - - fb_info.gen.info.fbops = &au1100fb_ops; - fb_info.gen.info.disp = &disp; - fb_info.gen.info.switch_con = &fbgen_switch; - fb_info.gen.info.updatevar = &fbgen_update_var; - fb_info.gen.info.blank = &fbgen_blank; - fb_info.gen.info.flags = FBINFO_FLAG_DEFAULT; - - /* This should give a reasonable default video mode */ - fbgen_get_var(&disp.var, -1, &fb_info.gen.info); - fbgen_do_set_var(&disp.var, 1, &fb_info.gen); - fbgen_set_disp(-1, &fb_info.gen); - fbgen_install_cmap(0, &fb_info.gen); - if (register_framebuffer(&fb_info.gen.info) < 0) - return -EINVAL; - printk(KERN_INFO "fb%d: %s frame buffer device\n", - GET_FB_IDX(fb_info.gen.info.node), - fb_info.gen.info.modename); + print_dbg("Framebuffer memory map at %p", fbdev->fb_mem); + print_dbg("phys=0x%08x, size=%dK", fbdev->fb_phys, fbdev->fb_len / 1024); + + /* Setup LCD clock to AUX (48 MHz) */ + sys_clksrc = au_readl(SYS_CLKSRC) & ~(SYS_CS_ML_MASK | SYS_CS_DL | SYS_CS_CL); + au_writel((sys_clksrc | (1 << SYS_CS_ML_BIT)), SYS_CLKSRC); + + /* load the panel info into the var struct */ + au1100fb_var.bits_per_pixel = fbdev->panel->bpp; + au1100fb_var.xres = fbdev->panel->xres; + au1100fb_var.xres_virtual = au1100fb_var.xres; + au1100fb_var.yres = fbdev->panel->yres; + au1100fb_var.yres_virtual = au1100fb_var.yres; + + fbdev->info.screen_base = fbdev->fb_mem; + fbdev->info.fbops = &au1100fb_ops; + fbdev->info.fix = au1100fb_fix; + + if (!(fbdev->info.pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL))) { + return -ENOMEM; + } + memset(fbdev->info.pseudo_palette, 0, sizeof(u32) * 16); + + if (fb_alloc_cmap(&fbdev->info.cmap, AU1100_LCD_NBR_PALETTE_ENTRIES, 0) < 0) { + print_err("Fail to allocate colormap (%d entries)", + AU1100_LCD_NBR_PALETTE_ENTRIES); + kfree(fbdev->info.pseudo_palette); + return -EFAULT; + } + + fbdev->info.var = au1100fb_var; + + /* Set h/w registers */ + au1100fb_setmode(fbdev); + + /* Register new framebuffer */ + if (register_framebuffer(&fbdev->info) < 0) { + print_err("cannot register new framebuffer"); + goto failed; + } + + return 0; + +failed: + if (fbdev->regs) { + release_mem_region(fbdev->regs_phys, fbdev->regs_len); + } + if (fbdev->fb_mem) { + dma_free_noncoherent(dev, fbdev->fb_len, fbdev->fb_mem, fbdev->fb_phys); + } + if (fbdev->info.cmap.len != 0) { + fb_dealloc_cmap(&fbdev->info.cmap); + } + kfree(fbdev); + dev_set_drvdata(dev, NULL); return 0; } +int au1100fb_drv_remove(struct device *dev) +{ + struct au1100fb_device *fbdev = NULL; + + if (!dev) + return -ENODEV; + + fbdev = (struct au1100fb_device*) dev_get_drvdata(dev); + +#if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO) + au1100fb_fb_blank(VESA_POWERDOWN, &fbdev->info); +#endif + fbdev->regs->lcd_control &= ~LCD_CONTROL_GO; -void au1100fb_cleanup(struct fb_info *info) + /* Clean up all probe data */ + unregister_framebuffer(&fbdev->info); + + release_mem_region(fbdev->regs_phys, fbdev->regs_len); + + dma_free_coherent(dev, PAGE_ALIGN(fbdev->fb_len), fbdev->fb_mem, fbdev->fb_phys); + + fb_dealloc_cmap(&fbdev->info.cmap); + kfree(fbdev->info.pseudo_palette); + kfree((void*)fbdev); + + return 0; +} + +int au1100fb_drv_suspend(struct device *dev, u32 state, u32 level) +{ + /* TODO */ + return 0; +} + +int au1100fb_drv_resume(struct device *dev, u32 level) { - unregister_framebuffer(info); + /* TODO */ + return 0; } +static struct device_driver au1100fb_driver = { + .name = "au1100-lcd", + .bus = &platform_bus_type, -void au1100fb_setup(char *options, int *ints) + .probe = au1100fb_drv_probe, + .remove = au1100fb_drv_remove, + .suspend = au1100fb_drv_suspend, + .resume = au1100fb_drv_resume, +}; + +/*-------------------------------------------------------------------------*/ + +/* Kernel driver */ + +int au1100fb_setup(char *options) { char* this_opt; - int i; - int num_panels = sizeof(panels)/sizeof(struct known_lcd_panels); + int num_panels = ARRAY_SIZE(known_lcd_panels); + char* mode = NULL; + int panel_idx = 0; + if (num_panels <= 0) { + print_err("No LCD panels supported by driver!"); + return -EFAULT; + } - if (!options || !*options) - return; - - for(this_opt=strtok(options, ","); this_opt; - this_opt=strtok(NULL, ",")) { + if (options) { + while ((this_opt = strsep(&options,",")) != NULL) { + /* Panel option */ if (!strncmp(this_opt, "panel:", 6)) { -#if defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_DB1100) - /* Read Pb1100 Switch S10 ? */ - if (!strncmp(this_opt+6, "s10", 3)) - { - int panel; - panel = *(volatile int *)0xAE000008; /* BCSR SWITCHES */ - panel >>= 8; - panel &= 0x0F; - if (panel >= num_panels) panel = 0; - my_lcd_index = panel; - } - else -#endif - /* Get the panel name, everything else if fixed */ - for (i=0; i<num_panels; i++) { - if (!strncmp(this_opt+6, panels[i].panel_name, + int i; + this_opt += 6; + for (i = 0; i < num_panels; i++) { + if (!strncmp(this_opt, + known_lcd_panels[i].name, strlen(this_opt))) { - my_lcd_index = i; + panel_idx = i; break; } } + if (i >= num_panels) { + print_warn("Panel %s not supported!", this_opt); + } + } + /* Mode option (only option that start with digit) */ + else if (isdigit(this_opt[0])) { + mode = kmalloc(strlen(this_opt) + 1, GFP_KERNEL); + strncpy(mode, this_opt, strlen(this_opt) + 1); + } + /* Unsupported option */ + else { + print_warn("Unsupported option \"%s\"", this_opt); } - else if (!strncmp(this_opt, "nohwcursor", 10)) { - printk("nohwcursor\n"); - fb_info.nohwcursor = 1; } } - printk("au1100fb: Panel %d %s\n", my_lcd_index, - panels[my_lcd_index].panel_name); -} + drv_info.panel_idx = panel_idx; + drv_info.opt_mode = mode; + print_info("Panel=%s Mode=%s", + known_lcd_panels[drv_info.panel_idx].name, + drv_info.opt_mode ? drv_info.opt_mode : "default"); + return 0; +} -#ifdef MODULE -MODULE_LICENSE("GPL"); -int init_module(void) +int __init au1100fb_init(void) { - return au1100fb_init(); + char* options; + int ret; + + print_info("" DRIVER_DESC ""); + + memset(&drv_info, 0, sizeof(drv_info)); + + if (fb_get_options(DRIVER_NAME, &options)) + return -ENODEV; + + /* Setup driver with options */ + ret = au1100fb_setup(options); + if (ret < 0) { + print_err("Fail to setup driver"); + return ret; + } + + return driver_register(&au1100fb_driver); } -void cleanup_module(void) +void __exit au1100fb_cleanup(void) { - au1100fb_cleanup(void); + driver_unregister(&au1100fb_driver); + + if (drv_info.opt_mode) + kfree(drv_info.opt_mode); } -MODULE_AUTHOR("Pete Popov <ppopov@mvista.com>"); -MODULE_DESCRIPTION("Au1100 LCD framebuffer device driver"); -#endif /* MODULE */ +module_init(au1100fb_init); +module_exit(au1100fb_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/au1100fb.h b/drivers/video/au1100fb.h index 657c560ab73..2855534dc23 100644 --- a/drivers/video/au1100fb.h +++ b/drivers/video/au1100fb.h @@ -30,352 +30,352 @@ #ifndef _AU1100LCD_H #define _AU1100LCD_H +#include <asm/mach-au1x00/au1000.h> + +#define print_err(f, arg...) printk(KERN_ERR DRIVER_NAME ": " f "\n", ## arg) +#define print_warn(f, arg...) printk(KERN_WARNING DRIVER_NAME ": " f "\n", ## arg) +#define print_info(f, arg...) printk(KERN_INFO DRIVER_NAME ": " f "\n", ## arg) + +#if DEBUG +#define print_dbg(f, arg...) printk(__FILE__ ": " f "\n", ## arg) +#else +#define print_dbg(f, arg...) do {} while (0) +#endif + +#if defined(__BIG_ENDIAN) +#define LCD_CONTROL_DEFAULT_PO LCD_CONTROL_PO_11 +#else +#define LCD_CONTROL_DEFAULT_PO LCD_CONTROL_PO_00 +#endif +#define LCD_CONTROL_DEFAULT_SBPPF LCD_CONTROL_SBPPF_565 + /********************************************************************/ -#define uint32 unsigned long -typedef volatile struct -{ - uint32 lcd_control; - uint32 lcd_intstatus; - uint32 lcd_intenable; - uint32 lcd_horztiming; - uint32 lcd_verttiming; - uint32 lcd_clkcontrol; - uint32 lcd_dmaaddr0; - uint32 lcd_dmaaddr1; - uint32 lcd_words; - uint32 lcd_pwmdiv; - uint32 lcd_pwmhi; - uint32 reserved[(0x0400-0x002C)/4]; - uint32 lcd_pallettebase[256]; - -} AU1100_LCD; + +/* LCD controller restrictions */ +#define AU1100_LCD_MAX_XRES 800 +#define AU1100_LCD_MAX_YRES 600 +#define AU1100_LCD_MAX_BPP 16 +#define AU1100_LCD_MAX_CLK 48000000 +#define AU1100_LCD_NBR_PALETTE_ENTRIES 256 + +/* Default number of visible screen buffer to allocate */ +#define AU1100FB_NBR_VIDEO_BUFFERS 4 /********************************************************************/ -#define AU1100_LCD_ADDR 0xB5000000 +struct au1100fb_panel +{ + const char name[25]; /* Full name <vendor>_<model> */ -/* - * Register bit definitions - */ + u32 control_base; /* Mode-independent control values */ + u32 clkcontrol_base; /* Panel pixclock preferences */ -/* lcd_control */ -#define LCD_CONTROL_SBPPF (7<<18) -#define LCD_CONTROL_SBPPF_655 (0<<18) -#define LCD_CONTROL_SBPPF_565 (1<<18) -#define LCD_CONTROL_SBPPF_556 (2<<18) -#define LCD_CONTROL_SBPPF_1555 (3<<18) -#define LCD_CONTROL_SBPPF_5551 (4<<18) -#define LCD_CONTROL_WP (1<<17) -#define LCD_CONTROL_WD (1<<16) -#define LCD_CONTROL_C (1<<15) -#define LCD_CONTROL_SM (3<<13) -#define LCD_CONTROL_SM_0 (0<<13) -#define LCD_CONTROL_SM_90 (1<<13) -#define LCD_CONTROL_SM_180 (2<<13) -#define LCD_CONTROL_SM_270 (3<<13) -#define LCD_CONTROL_DB (1<<12) -#define LCD_CONTROL_CCO (1<<11) -#define LCD_CONTROL_DP (1<<10) -#define LCD_CONTROL_PO (3<<8) -#define LCD_CONTROL_PO_00 (0<<8) -#define LCD_CONTROL_PO_01 (1<<8) -#define LCD_CONTROL_PO_10 (2<<8) -#define LCD_CONTROL_PO_11 (3<<8) -#define LCD_CONTROL_MPI (1<<7) -#define LCD_CONTROL_PT (1<<6) -#define LCD_CONTROL_PC (1<<5) -#define LCD_CONTROL_BPP (7<<1) -#define LCD_CONTROL_BPP_1 (0<<1) -#define LCD_CONTROL_BPP_2 (1<<1) -#define LCD_CONTROL_BPP_4 (2<<1) -#define LCD_CONTROL_BPP_8 (3<<1) -#define LCD_CONTROL_BPP_12 (4<<1) -#define LCD_CONTROL_BPP_16 (5<<1) -#define LCD_CONTROL_GO (1<<0) - -/* lcd_intstatus, lcd_intenable */ -#define LCD_INT_SD (1<<7) -#define LCD_INT_OF (1<<6) -#define LCD_INT_UF (1<<5) -#define LCD_INT_SA (1<<3) -#define LCD_INT_SS (1<<2) -#define LCD_INT_S1 (1<<1) -#define LCD_INT_S0 (1<<0) - -/* lcd_horztiming */ -#define LCD_HORZTIMING_HN2 (255<<24) -#define LCD_HORZTIMING_HN2_N(N) (((N)-1)<<24) -#define LCD_HORZTIMING_HN1 (255<<16) -#define LCD_HORZTIMING_HN1_N(N) (((N)-1)<<16) -#define LCD_HORZTIMING_HPW (63<<10) -#define LCD_HORZTIMING_HPW_N(N) (((N)-1)<<10) -#define LCD_HORZTIMING_PPL (1023<<0) -#define LCD_HORZTIMING_PPL_N(N) (((N)-1)<<0) - -/* lcd_verttiming */ -#define LCD_VERTTIMING_VN2 (255<<24) -#define LCD_VERTTIMING_VN2_N(N) (((N)-1)<<24) -#define LCD_VERTTIMING_VN1 (255<<16) -#define LCD_VERTTIMING_VN1_N(N) (((N)-1)<<16) -#define LCD_VERTTIMING_VPW (63<<10) -#define LCD_VERTTIMING_VPW_N(N) (((N)-1)<<10) -#define LCD_VERTTIMING_LPP (1023<<0) -#define LCD_VERTTIMING_LPP_N(N) (((N)-1)<<0) - -/* lcd_clkcontrol */ -#define LCD_CLKCONTROL_IB (1<<18) -#define LCD_CLKCONTROL_IC (1<<17) -#define LCD_CLKCONTROL_IH (1<<16) -#define LCD_CLKCONTROL_IV (1<<15) -#define LCD_CLKCONTROL_BF (31<<10) -#define LCD_CLKCONTROL_BF_N(N) (((N)-1)<<10) -#define LCD_CLKCONTROL_PCD (1023<<0) -#define LCD_CLKCONTROL_PCD_N(N) ((N)<<0) - -/* lcd_pwmdiv */ -#define LCD_PWMDIV_EN (1<<12) -#define LCD_PWMDIV_PWMDIV (2047<<0) -#define LCD_PWMDIV_PWMDIV_N(N) (((N)-1)<<0) - -/* lcd_pwmhi */ -#define LCD_PWMHI_PWMHI1 (2047<<12) -#define LCD_PWMHI_PWMHI1_N(N) ((N)<<12) -#define LCD_PWMHI_PWMHI0 (2047<<0) -#define LCD_PWMHI_PWMHI0_N(N) ((N)<<0) - -/* lcd_pallettebase - MONOCHROME */ -#define LCD_PALLETTE_MONO_MI (15<<0) -#define LCD_PALLETTE_MONO_MI_N(N) ((N)<<0) - -/* lcd_pallettebase - COLOR */ -#define LCD_PALLETTE_COLOR_BI (15<<8) -#define LCD_PALLETTE_COLOR_BI_N(N) ((N)<<8) -#define LCD_PALLETTE_COLOR_GI (15<<4) -#define LCD_PALLETTE_COLOR_GI_N(N) ((N)<<4) -#define LCD_PALLETTE_COLOR_RI (15<<0) -#define LCD_PALLETTE_COLOR_RI_N(N) ((N)<<0) - -/* lcd_palletebase - COLOR TFT PALLETIZED */ -#define LCD_PALLETTE_TFT_DC (65535<<0) -#define LCD_PALLETTE_TFT_DC_N(N) ((N)<<0) + u32 horztiming; + u32 verttiming; -/********************************************************************/ + u32 xres; /* Maximum horizontal resolution */ + u32 yres; /* Maximum vertical resolution */ + u32 bpp; /* Maximum depth supported */ +}; -struct known_lcd_panels +struct au1100fb_regs { - uint32 xres; - uint32 yres; - uint32 bpp; - unsigned char panel_name[256]; - uint32 mode_control; - uint32 mode_horztiming; - uint32 mode_verttiming; - uint32 mode_clkcontrol; - uint32 mode_pwmdiv; - uint32 mode_pwmhi; - uint32 mode_toyclksrc; - uint32 mode_backlight; + u32 lcd_control; + u32 lcd_intstatus; + u32 lcd_intenable; + u32 lcd_horztiming; + u32 lcd_verttiming; + u32 lcd_clkcontrol; + u32 lcd_dmaaddr0; + u32 lcd_dmaaddr1; + u32 lcd_words; + u32 lcd_pwmdiv; + u32 lcd_pwmhi; + u32 reserved[(0x0400-0x002C)/4]; + u32 lcd_pallettebase[256]; +}; + +struct au1100fb_device { + + struct fb_info info; /* FB driver info record */ + struct au1100fb_panel *panel; /* Panel connected to this device */ + + struct au1100fb_regs* regs; /* Registers memory map */ + size_t regs_len; + unsigned int regs_phys; + + unsigned char* fb_mem; /* FrameBuffer memory map */ + size_t fb_len; + dma_addr_t fb_phys; }; -#if defined(__BIG_ENDIAN) -#define LCD_DEFAULT_PIX_FORMAT LCD_CONTROL_PO_11 -#else -#define LCD_DEFAULT_PIX_FORMAT LCD_CONTROL_PO_00 -#endif +/********************************************************************/ -/* - * The fb driver assumes that AUX PLL is at 48MHz. That can - * cover up to 800x600 resolution; if you need higher resolution, - * you should modify the driver as needed, not just this structure. +#define LCD_CONTROL (AU1100_LCD_BASE + 0x0) + #define LCD_CONTROL_SBB_BIT 21 + #define LCD_CONTROL_SBB_MASK (0x3 << LCD_CONTROL_SBB_BIT) + #define LCD_CONTROL_SBB_1 (0 << LCD_CONTROL_SBB_BIT) + #define LCD_CONTROL_SBB_2 (1 << LCD_CONTROL_SBB_BIT) + #define LCD_CONTROL_SBB_3 (2 << LCD_CONTROL_SBB_BIT) + #define LCD_CONTROL_SBB_4 (3 << LCD_CONTROL_SBB_BIT) + #define LCD_CONTROL_SBPPF_BIT 18 + #define LCD_CONTROL_SBPPF_MASK (0x7 << LCD_CONTROL_SBPPF_BIT) + #define LCD_CONTROL_SBPPF_655 (0 << LCD_CONTROL_SBPPF_BIT) + #define LCD_CONTROL_SBPPF_565 (1 << LCD_CONTROL_SBPPF_BIT) + #define LCD_CONTROL_SBPPF_556 (2 << LCD_CONTROL_SBPPF_BIT) + #define LCD_CONTROL_SBPPF_1555 (3 << LCD_CONTROL_SBPPF_BIT) + #define LCD_CONTROL_SBPPF_5551 (4 << LCD_CONTROL_SBPPF_BIT) + #define LCD_CONTROL_WP (1<<17) + #define LCD_CONTROL_WD (1<<16) + #define LCD_CONTROL_C (1<<15) + #define LCD_CONTROL_SM_BIT 13 + #define LCD_CONTROL_SM_MASK (0x3 << LCD_CONTROL_SM_BIT) + #define LCD_CONTROL_SM_0 (0 << LCD_CONTROL_SM_BIT) + #define LCD_CONTROL_SM_90 (1 << LCD_CONTROL_SM_BIT) + #define LCD_CONTROL_SM_180 (2 << LCD_CONTROL_SM_BIT) + #define LCD_CONTROL_SM_270 (3 << LCD_CONTROL_SM_BIT) + #define LCD_CONTROL_DB (1<<12) + #define LCD_CONTROL_CCO (1<<11) + #define LCD_CONTROL_DP (1<<10) + #define LCD_CONTROL_PO_BIT 8 + #define LCD_CONTROL_PO_MASK (0x3 << LCD_CONTROL_PO_BIT) + #define LCD_CONTROL_PO_00 (0 << LCD_CONTROL_PO_BIT) + #define LCD_CONTROL_PO_01 (1 << LCD_CONTROL_PO_BIT) + #define LCD_CONTROL_PO_10 (2 << LCD_CONTROL_PO_BIT) + #define LCD_CONTROL_PO_11 (3 << LCD_CONTROL_PO_BIT) + #define LCD_CONTROL_MPI (1<<7) + #define LCD_CONTROL_PT (1<<6) + #define LCD_CONTROL_PC (1<<5) + #define LCD_CONTROL_BPP_BIT 1 + #define LCD_CONTROL_BPP_MASK (0x7 << LCD_CONTROL_BPP_BIT) + #define LCD_CONTROL_BPP_1 (0 << LCD_CONTROL_BPP_BIT) + #define LCD_CONTROL_BPP_2 (1 << LCD_CONTROL_BPP_BIT) + #define LCD_CONTROL_BPP_4 (2 << LCD_CONTROL_BPP_BIT) + #define LCD_CONTROL_BPP_8 (3 << LCD_CONTROL_BPP_BIT) + #define LCD_CONTROL_BPP_12 (4 << LCD_CONTROL_BPP_BIT) + #define LCD_CONTROL_BPP_16 (5 << LCD_CONTROL_BPP_BIT) + #define LCD_CONTROL_GO (1<<0) + +#define LCD_INTSTATUS (AU1100_LCD_BASE + 0x4) +#define LCD_INTENABLE (AU1100_LCD_BASE + 0x8) + #define LCD_INT_SD (1<<7) + #define LCD_INT_OF (1<<6) + #define LCD_INT_UF (1<<5) + #define LCD_INT_SA (1<<3) + #define LCD_INT_SS (1<<2) + #define LCD_INT_S1 (1<<1) + #define LCD_INT_S0 (1<<0) + +#define LCD_HORZTIMING (AU1100_LCD_BASE + 0xC) + #define LCD_HORZTIMING_HN2_BIT 24 + #define LCD_HORZTIMING_HN2_MASK (0xFF << LCD_HORZTIMING_HN2_BIT) + #define LCD_HORZTIMING_HN2_N(N) ((((N)-1) << LCD_HORZTIMING_HN2_BIT) & LCD_HORZTIMING_HN2_MASK) + #define LCD_HORZTIMING_HN1_BIT 16 + #define LCD_HORZTIMING_HN1_MASK (0xFF << LCD_HORZTIMING_HN1_BIT) + #define LCD_HORZTIMING_HN1_N(N) ((((N)-1) << LCD_HORZTIMING_HN1_BIT) & LCD_HORZTIMING_HN1_MASK) + #define LCD_HORZTIMING_HPW_BIT 10 + #define LCD_HORZTIMING_HPW_MASK (0x3F << LCD_HORZTIMING_HPW_BIT) + #define LCD_HORZTIMING_HPW_N(N) ((((N)-1) << LCD_HORZTIMING_HPW_BIT) & LCD_HORZTIMING_HPW_MASK) + #define LCD_HORZTIMING_PPL_BIT 0 + #define LCD_HORZTIMING_PPL_MASK (0x3FF << LCD_HORZTIMING_PPL_BIT) + #define LCD_HORZTIMING_PPL_N(N) ((((N)-1) << LCD_HORZTIMING_PPL_BIT) & LCD_HORZTIMING_PPL_MASK) + +#define LCD_VERTTIMING (AU1100_LCD_BASE + 0x10) + #define LCD_VERTTIMING_VN2_BIT 24 + #define LCD_VERTTIMING_VN2_MASK (0xFF << LCD_VERTTIMING_VN2_BIT) + #define LCD_VERTTIMING_VN2_N(N) ((((N)-1) << LCD_VERTTIMING_VN2_BIT) & LCD_VERTTIMING_VN2_MASK) + #define LCD_VERTTIMING_VN1_BIT 16 + #define LCD_VERTTIMING_VN1_MASK (0xFF << LCD_VERTTIMING_VN1_BIT) + #define LCD_VERTTIMING_VN1_N(N) ((((N)-1) << LCD_VERTTIMING_VN1_BIT) & LCD_VERTTIMING_VN1_MASK) + #define LCD_VERTTIMING_VPW_BIT 10 + #define LCD_VERTTIMING_VPW_MASK (0x3F << LCD_VERTTIMING_VPW_BIT) + #define LCD_VERTTIMING_VPW_N(N) ((((N)-1) << LCD_VERTTIMING_VPW_BIT) & LCD_VERTTIMING_VPW_MASK) + #define LCD_VERTTIMING_LPP_BIT 0 + #define LCD_VERTTIMING_LPP_MASK (0x3FF << LCD_VERTTIMING_LPP_BIT) + #define LCD_VERTTIMING_LPP_N(N) ((((N)-1) << LCD_VERTTIMING_LPP_BIT) & LCD_VERTTIMING_LPP_MASK) + +#define LCD_CLKCONTROL (AU1100_LCD_BASE + 0x14) + #define LCD_CLKCONTROL_IB (1<<18) + #define LCD_CLKCONTROL_IC (1<<17) + #define LCD_CLKCONTROL_IH (1<<16) + #define LCD_CLKCONTROL_IV (1<<15) + #define LCD_CLKCONTROL_BF_BIT 10 + #define LCD_CLKCONTROL_BF_MASK (0x1F << LCD_CLKCONTROL_BF_BIT) + #define LCD_CLKCONTROL_BF_N(N) ((((N)-1) << LCD_CLKCONTROL_BF_BIT) & LCD_CLKCONTROL_BF_MASK) + #define LCD_CLKCONTROL_PCD_BIT 0 + #define LCD_CLKCONTROL_PCD_MASK (0x3FF << LCD_CLKCONTROL_PCD_BIT) + #define LCD_CLKCONTROL_PCD_N(N) (((N) << LCD_CLKCONTROL_PCD_BIT) & LCD_CLKCONTROL_PCD_MASK) + +#define LCD_DMAADDR0 (AU1100_LCD_BASE + 0x18) +#define LCD_DMAADDR1 (AU1100_LCD_BASE + 0x1C) + #define LCD_DMA_SA_BIT 5 + #define LCD_DMA_SA_MASK (0x7FFFFFF << LCD_DMA_SA_BIT) + #define LCD_DMA_SA_N(N) ((N) & LCD_DMA_SA_MASK) + +#define LCD_WORDS (AU1100_LCD_BASE + 0x20) + #define LCD_WRD_WRDS_BIT 0 + #define LCD_WRD_WRDS_MASK (0xFFFFFFFF << LCD_WRD_WRDS_BIT) + #define LCD_WRD_WRDS_N(N) ((((N)-1) << LCD_WRD_WRDS_BIT) & LCD_WRD_WRDS_MASK) + +#define LCD_PWMDIV (AU1100_LCD_BASE + 0x24) + #define LCD_PWMDIV_EN (1<<12) + #define LCD_PWMDIV_PWMDIV_BIT 0 + #define LCD_PWMDIV_PWMDIV_MASK (0xFFF << LCD_PWMDIV_PWMDIV_BIT) + #define LCD_PWMDIV_PWMDIV_N(N) ((((N)-1) << LCD_PWMDIV_PWMDIV_BIT) & LCD_PWMDIV_PWMDIV_MASK) + +#define LCD_PWMHI (AU1100_LCD_BASE + 0x28) + #define LCD_PWMHI_PWMHI1_BIT 12 + #define LCD_PWMHI_PWMHI1_MASK (0xFFF << LCD_PWMHI_PWMHI1_BIT) + #define LCD_PWMHI_PWMHI1_N(N) (((N) << LCD_PWMHI_PWMHI1_BIT) & LCD_PWMHI_PWMHI1_MASK) + #define LCD_PWMHI_PWMHI0_BIT 0 + #define LCD_PWMHI_PWMHI0_MASK (0xFFF << LCD_PWMHI_PWMHI0_BIT) + #define LCD_PWMHI_PWMHI0_N(N) (((N) << LCD_PWMHI_PWMHI0_BIT) & LCD_PWMHI_PWMHI0_MASK) + +#define LCD_PALLETTEBASE (AU1100_LCD_BASE + 0x400) + #define LCD_PALLETTE_MONO_MI_BIT 0 + #define LCD_PALLETTE_MONO_MI_MASK (0xF << LCD_PALLETTE_MONO_MI_BIT) + #define LCD_PALLETTE_MONO_MI_N(N) (((N)<< LCD_PALLETTE_MONO_MI_BIT) & LCD_PALLETTE_MONO_MI_MASK) + + #define LCD_PALLETTE_COLOR_RI_BIT 8 + #define LCD_PALLETTE_COLOR_RI_MASK (0xF << LCD_PALLETTE_COLOR_RI_BIT) + #define LCD_PALLETTE_COLOR_RI_N(N) (((N)<< LCD_PALLETTE_COLOR_RI_BIT) & LCD_PALLETTE_COLOR_RI_MASK) + #define LCD_PALLETTE_COLOR_GI_BIT 4 + #define LCD_PALLETTE_COLOR_GI_MASK (0xF << LCD_PALLETTE_COLOR_GI_BIT) + #define LCD_PALLETTE_COLOR_GI_N(N) (((N)<< LCD_PALLETTE_COLOR_GI_BIT) & LCD_PALLETTE_COLOR_GI_MASK) + #define LCD_PALLETTE_COLOR_BI_BIT 0 + #define LCD_PALLETTE_COLOR_BI_MASK (0xF << LCD_PALLETTE_COLOR_BI_BIT) + #define LCD_PALLETTE_COLOR_BI_N(N) (((N)<< LCD_PALLETTE_COLOR_BI_BIT) & LCD_PALLETTE_COLOR_BI_MASK) + + #define LCD_PALLETTE_TFT_DC_BIT 0 + #define LCD_PALLETTE_TFT_DC_MASK (0xFFFF << LCD_PALLETTE_TFT_DC_BIT) + #define LCD_PALLETTE_TFT_DC_N(N) (((N)<< LCD_PALLETTE_TFT_DC_BIT) & LCD_PALLETTE_TFT_DC_MASK) + +/********************************************************************/ + +/* List of panels known to work with the AU1100 LCD controller. + * To add a new panel, enter the same specifications as the + * Generic_TFT one, and MAKE SURE that it doesn't conflicts + * with the controller restrictions. Restrictions are: + * + * STN color panels: max_bpp <= 12 + * STN mono panels: max_bpp <= 4 + * TFT panels: max_bpp <= 16 + * max_xres <= 800 + * max_yres <= 600 */ -struct known_lcd_panels panels[] = +static struct au1100fb_panel known_lcd_panels[] = { - { /* 0: Pb1100 LCDA: Sharp 320x240 TFT panel */ - 320, /* xres */ - 240, /* yres */ - 16, /* bpp */ - - "Sharp_320x240_16", - /* mode_control */ + /* 800x600x16bpp CRT */ + [0] = { + .name = "CRT_800x600_16", + .xres = 800, + .yres = 600, + .bpp = 16, + .control_base = 0x0004886A | + LCD_CONTROL_DEFAULT_PO | LCD_CONTROL_DEFAULT_SBPPF | + LCD_CONTROL_BPP_16, + .clkcontrol_base = 0x00020000, + .horztiming = 0x005aff1f, + .verttiming = 0x16000e57, + }, + /* just the standard LCD */ + [1] = { + .name = "WWPC LCD", + .xres = 240, + .yres = 320, + .bpp = 16, + .control_base = 0x0006806A, + .horztiming = 0x0A1010EF, + .verttiming = 0x0301013F, + .clkcontrol_base = 0x00018001, + }, + /* Sharp 320x240 TFT panel */ + [2] = { + .name = "Sharp_LQ038Q5DR01", + .xres = 320, + .yres = 240, + .bpp = 16, + .control_base = ( LCD_CONTROL_SBPPF_565 - /*LCD_CONTROL_WP*/ - /*LCD_CONTROL_WD*/ | LCD_CONTROL_C | LCD_CONTROL_SM_0 - /*LCD_CONTROL_DB*/ - /*LCD_CONTROL_CCO*/ - /*LCD_CONTROL_DP*/ - | LCD_DEFAULT_PIX_FORMAT - /*LCD_CONTROL_MPI*/ + | LCD_CONTROL_DEFAULT_PO | LCD_CONTROL_PT | LCD_CONTROL_PC | LCD_CONTROL_BPP_16 ), - - /* mode_horztiming */ + .horztiming = ( LCD_HORZTIMING_HN2_N(8) | LCD_HORZTIMING_HN1_N(60) | LCD_HORZTIMING_HPW_N(12) | LCD_HORZTIMING_PPL_N(320) ), - - /* mode_verttiming */ + .verttiming = ( LCD_VERTTIMING_VN2_N(5) | LCD_VERTTIMING_VN1_N(17) | LCD_VERTTIMING_VPW_N(1) | LCD_VERTTIMING_LPP_N(240) ), - - /* mode_clkcontrol */ - ( 0 - /*LCD_CLKCONTROL_IB*/ - /*LCD_CLKCONTROL_IC*/ - /*LCD_CLKCONTROL_IH*/ - /*LCD_CLKCONTROL_IV*/ - | LCD_CLKCONTROL_PCD_N(1) ), - - /* mode_pwmdiv */ - 0, - - /* mode_pwmhi */ - 0, - - /* mode_toyclksrc */ - ((1<<7) | (1<<6) | (1<<5)), - - /* mode_backlight */ - 6 + .clkcontrol_base = LCD_CLKCONTROL_PCD_N(1), }, - { /* 1: Pb1100 LCDC 640x480 TFT panel */ - 640, /* xres */ - 480, /* yres */ - 16, /* bpp */ - - "Generic_640x480_16", - - /* mode_control */ - 0x004806a | LCD_DEFAULT_PIX_FORMAT, - - /* mode_horztiming */ - 0x3434d67f, - - /* mode_verttiming */ - 0x0e0e39df, - - /* mode_clkcontrol */ - ( 0 - /*LCD_CLKCONTROL_IB*/ - /*LCD_CLKCONTROL_IC*/ - /*LCD_CLKCONTROL_IH*/ - /*LCD_CLKCONTROL_IV*/ - | LCD_CLKCONTROL_PCD_N(1) ), - - /* mode_pwmdiv */ - 0, - - /* mode_pwmhi */ - 0, - - /* mode_toyclksrc */ - ((1<<7) | (1<<6) | (0<<5)), - - /* mode_backlight */ - 7 + /* Hitachi SP14Q005 and possibly others */ + [3] = { + .name = "Hitachi_SP14Qxxx", + .xres = 320, + .yres = 240, + .bpp = 4, + .control_base = + ( LCD_CONTROL_C + | LCD_CONTROL_BPP_4 ), + .horztiming = + ( LCD_HORZTIMING_HN2_N(1) + | LCD_HORZTIMING_HN1_N(1) + | LCD_HORZTIMING_HPW_N(1) + | LCD_HORZTIMING_PPL_N(320) ), + .verttiming = + ( LCD_VERTTIMING_VN2_N(1) + | LCD_VERTTIMING_VN1_N(1) + | LCD_VERTTIMING_VPW_N(1) + | LCD_VERTTIMING_LPP_N(240) ), + .clkcontrol_base = LCD_CLKCONTROL_PCD_N(4), }, - { /* 2: Pb1100 LCDB 640x480 PrimeView TFT panel */ - 640, /* xres */ - 480, /* yres */ - 16, /* bpp */ - - "PrimeView_640x480_16", - - /* mode_control */ - 0x0004886a | LCD_DEFAULT_PIX_FORMAT, - - /* mode_horztiming */ - 0x0e4bfe7f, - - /* mode_verttiming */ - 0x210805df, - - /* mode_clkcontrol */ - 0x00038001, - - /* mode_pwmdiv */ - 0, - - /* mode_pwmhi */ - 0, - - /* mode_toyclksrc */ - ((1<<7) | (1<<6) | (0<<5)), - - /* mode_backlight */ - 7 + /* Generic 640x480 TFT panel */ + [4] = { + .name = "TFT_640x480_16", + .xres = 640, + .yres = 480, + .bpp = 16, + .control_base = 0x004806a | LCD_CONTROL_DEFAULT_PO, + .horztiming = 0x3434d67f, + .verttiming = 0x0e0e39df, + .clkcontrol_base = LCD_CLKCONTROL_PCD_N(1), }, - { /* 3: Pb1100 800x600x16bpp NEON CRT */ - 800, /* xres */ - 600, /* yres */ - 16, /* bpp */ - - "NEON_800x600_16", - - /* mode_control */ - 0x0004886A | LCD_DEFAULT_PIX_FORMAT, - - /* mode_horztiming */ - 0x005AFF1F, - - /* mode_verttiming */ - 0x16000E57, - - /* mode_clkcontrol */ - 0x00020000, - - /* mode_pwmdiv */ - 0, - - /* mode_pwmhi */ - 0, - - /* mode_toyclksrc */ - ((1<<7) | (1<<6) | (0<<5)), - - /* mode_backlight */ - 7 + /* Pb1100 LCDB 640x480 PrimeView TFT panel */ + [5] = { + .name = "PrimeView_640x480_16", + .xres = 640, + .yres = 480, + .bpp = 16, + .control_base = 0x0004886a | LCD_CONTROL_DEFAULT_PO, + .horztiming = 0x0e4bfe7f, + .verttiming = 0x210805df, + .clkcontrol_base = 0x00038001, }, +}; - { /* 4: Pb1100 640x480x16bpp NEON CRT */ - 640, /* xres */ - 480, /* yres */ - 16, /* bpp */ - - "NEON_640x480_16", - - /* mode_control */ - 0x0004886A | LCD_DEFAULT_PIX_FORMAT, - - /* mode_horztiming */ - 0x0052E27F, - - /* mode_verttiming */ - 0x18000DDF, - - /* mode_clkcontrol */ - 0x00020000, +struct au1100fb_drv_info { + int panel_idx; + char *opt_mode; +}; - /* mode_pwmdiv */ - 0, +/********************************************************************/ - /* mode_pwmhi */ - 0, +/* Inline helpers */ - /* mode_toyclksrc */ - ((1<<7) | (1<<6) | (0<<5)), +#define panel_is_dual(panel) (panel->control_base & LCD_CONTROL_DP) +#define panel_is_active(panel)(panel->control_base & LCD_CONTROL_PT) +#define panel_is_color(panel) (panel->control_base & LCD_CONTROL_PC) +#define panel_swap_rgb(panel) (panel->control_base & LCD_CONTROL_CCO) - /* mode_backlight */ - 7 - }, -}; #endif /* _AU1100LCD_H */ |