viafb: use more compact modesetting functions

This patch replaces the old timing setup code with a redesigned one.
The new code might be slightly faster as it has no conditinals and
does not write the same register multiple times. Also it makes the
comparison to the documentation easier.
Regressions are unlikely but could happen as a lot of hardware is
undocumented.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

1 files changed, 0 insertions, 273 deletions

diff --git a/drivers/video/via/hw.h b/drivers/video/via/hw.h
index c7239eb83ba..267c669be73 100644
--- a/drivers/video/via/hw.h
+++ b/drivers/video/via/hw.h
@@ -51,40 +51,6 @@
 #define VIA_HSYNC_NEGATIVE	0x01
 #define VIA_VSYNC_NEGATIVE	0x02
 
-/***************************************************
-* Definition IGA1 Design Method of CRTC Registers *
-****************************************************/
-#define IGA1_HOR_TOTAL_FORMULA(x)           (((x)/8)-5)
-#define IGA1_HOR_ADDR_FORMULA(x)            (((x)/8)-1)
-#define IGA1_HOR_BLANK_START_FORMULA(x)     (((x)/8)-1)
-#define IGA1_HOR_BLANK_END_FORMULA(x, y)     (((x+y)/8)-1)
-#define IGA1_HOR_SYNC_START_FORMULA(x)      ((x)/8)
-#define IGA1_HOR_SYNC_END_FORMULA(x, y)      ((x+y)/8)
-
-#define IGA1_VER_TOTAL_FORMULA(x)           ((x)-2)
-#define IGA1_VER_ADDR_FORMULA(x)            ((x)-1)
-#define IGA1_VER_BLANK_START_FORMULA(x)     ((x)-1)
-#define IGA1_VER_BLANK_END_FORMULA(x, y)     ((x+y)-1)
-#define IGA1_VER_SYNC_START_FORMULA(x)      ((x)-1)
-#define IGA1_VER_SYNC_END_FORMULA(x, y)      ((x+y)-1)
-
-/***************************************************
-** Definition IGA2 Design Method of CRTC Registers *
-****************************************************/
-#define IGA2_HOR_TOTAL_FORMULA(x)           ((x)-1)
-#define IGA2_HOR_ADDR_FORMULA(x)            ((x)-1)
-#define IGA2_HOR_BLANK_START_FORMULA(x)     ((x)-1)
-#define IGA2_HOR_BLANK_END_FORMULA(x, y)     ((x+y)-1)
-#define IGA2_HOR_SYNC_START_FORMULA(x)      ((x)-1)
-#define IGA2_HOR_SYNC_END_FORMULA(x, y)      ((x+y)-1)
-
-#define IGA2_VER_TOTAL_FORMULA(x)           ((x)-1)
-#define IGA2_VER_ADDR_FORMULA(x)            ((x)-1)
-#define IGA2_VER_BLANK_START_FORMULA(x)     ((x)-1)
-#define IGA2_VER_BLANK_END_FORMULA(x, y)     ((x+y)-1)
-#define IGA2_VER_SYNC_START_FORMULA(x)      ((x)-1)
-#define IGA2_VER_SYNC_END_FORMULA(x, y)      ((x+y)-1)
-
 /**********************************************************/
 /* Definition IGA2 Design Method of CRTC Shadow Registers */
 /**********************************************************/
@@ -97,33 +63,6 @@
 #define IGA2_VER_SYNC_START_SHADOW_FORMULA(x)      (x)
 #define IGA2_VER_SYNC_END_SHADOW_FORMULA(x, y)      (x+y)
 
-/* Define Register Number for IGA1 CRTC Timing */
-
-/* location: {CR00,0,7},{CR36,3,3} */
-#define IGA1_HOR_TOTAL_REG_NUM		2
-/* location: {CR01,0,7} */
-#define IGA1_HOR_ADDR_REG_NUM		1
-/* location: {CR02,0,7} */
-#define IGA1_HOR_BLANK_START_REG_NUM    1
-/* location: {CR03,0,4},{CR05,7,7},{CR33,5,5} */
-#define IGA1_HOR_BLANK_END_REG_NUM	3
-/* location: {CR04,0,7},{CR33,4,4} */
-#define IGA1_HOR_SYNC_START_REG_NUM	2
-/* location: {CR05,0,4} */
-#define IGA1_HOR_SYNC_END_REG_NUM       1
-/* location: {CR06,0,7},{CR07,0,0},{CR07,5,5},{CR35,0,0} */
-#define IGA1_VER_TOTAL_REG_NUM          4
-/* location: {CR12,0,7},{CR07,1,1},{CR07,6,6},{CR35,2,2} */
-#define IGA1_VER_ADDR_REG_NUM           4
-/* location: {CR15,0,7},{CR07,3,3},{CR09,5,5},{CR35,3,3} */
-#define IGA1_VER_BLANK_START_REG_NUM    4
-/* location: {CR16,0,7} */
-#define IGA1_VER_BLANK_END_REG_NUM      1
-/* location: {CR10,0,7},{CR07,2,2},{CR07,7,7},{CR35,1,1} */
-#define IGA1_VER_SYNC_START_REG_NUM     4
-/* location: {CR11,0,3} */
-#define IGA1_VER_SYNC_END_REG_NUM       1
-
 /* Define Register Number for IGA2 Shadow CRTC Timing */
 
 /* location: {CR6D,0,7},{CR71,3,3} */
@@ -143,37 +82,6 @@
 /* location: {CR76,0,3} */
 #define IGA2_SHADOW_VER_SYNC_END_REG_NUM    1
 
-/* Define Register Number for IGA2 CRTC Timing */
-
-/* location: {CR50,0,7},{CR55,0,3} */
-#define IGA2_HOR_TOTAL_REG_NUM          2
-/* location: {CR51,0,7},{CR55,4,6} */
-#define IGA2_HOR_ADDR_REG_NUM           2
-/* location: {CR52,0,7},{CR54,0,2} */
-#define IGA2_HOR_BLANK_START_REG_NUM    2
-/* location: CLE266: {CR53,0,7},{CR54,3,5} => CLE266's CR5D[6]
-is reserved, so it may have problem to set 1600x1200 on IGA2. */
-/*         	Others: {CR53,0,7},{CR54,3,5},{CR5D,6,6} */
-#define IGA2_HOR_BLANK_END_REG_NUM      3
-/* location: {CR56,0,7},{CR54,6,7},{CR5C,7,7} */
-/* VT3314 and Later: {CR56,0,7},{CR54,6,7},{CR5C,7,7}, {CR5D,7,7} */
-#define IGA2_HOR_SYNC_START_REG_NUM     4
-
-/* location: {CR57,0,7},{CR5C,6,6} */
-#define IGA2_HOR_SYNC_END_REG_NUM       2
-/* location: {CR58,0,7},{CR5D,0,2} */
-#define IGA2_VER_TOTAL_REG_NUM          2
-/* location: {CR59,0,7},{CR5D,3,5} */
-#define IGA2_VER_ADDR_REG_NUM           2
-/* location: {CR5A,0,7},{CR5C,0,2} */
-#define IGA2_VER_BLANK_START_REG_NUM    2
-/* location: {CR5E,0,7},{CR5C,3,5} */
-#define IGA2_VER_BLANK_END_REG_NUM      2
-/* location: {CR5E,0,7},{CR5F,5,7} */
-#define IGA2_VER_SYNC_START_REG_NUM     2
-/* location: {CR5F,0,4} */
-#define IGA2_VER_SYNC_END_REG_NUM       1
-
 /* Define Fetch Count Register*/
 
 /* location: {SR1C,0,7},{SR1D,0,1} */
@@ -446,87 +354,12 @@ is reserved, so it may have problem to set 1600x1200 on IGA2. */
 /* location: {CR78,0,7},{CR79,6,7} */
 #define LCD_VER_SCALING_FACTOR_REG_NUM_CLE  2
 
-/************************************************
- *****     Define IGA1 Display Timing       *****
- ************************************************/
 struct io_register {
 	u8 io_addr;
 	u8 start_bit;
 	u8 end_bit;
 };
 
-/* IGA1 Horizontal Total */
-struct iga1_hor_total {
-	int reg_num;
-	struct io_register reg[IGA1_HOR_TOTAL_REG_NUM];
-};
-
-/* IGA1 Horizontal Addressable Video */
-struct iga1_hor_addr {
-	int reg_num;
-	struct io_register reg[IGA1_HOR_ADDR_REG_NUM];
-};
-
-/* IGA1 Horizontal Blank Start */
-struct iga1_hor_blank_start {
-	int reg_num;
-	struct io_register reg[IGA1_HOR_BLANK_START_REG_NUM];
-};
-
-/* IGA1 Horizontal Blank End */
-struct iga1_hor_blank_end {
-	int reg_num;
-	struct io_register reg[IGA1_HOR_BLANK_END_REG_NUM];
-};
-
-/* IGA1 Horizontal Sync Start */
-struct iga1_hor_sync_start {
-	int reg_num;
-	struct io_register reg[IGA1_HOR_SYNC_START_REG_NUM];
-};
-
-/* IGA1 Horizontal Sync End */
-struct iga1_hor_sync_end {
-	int reg_num;
-	struct io_register reg[IGA1_HOR_SYNC_END_REG_NUM];
-};
-
-/* IGA1 Vertical Total */
-struct iga1_ver_total {
-	int reg_num;
-	struct io_register reg[IGA1_VER_TOTAL_REG_NUM];
-};
-
-/* IGA1 Vertical Addressable Video */
-struct iga1_ver_addr {
-	int reg_num;
-	struct io_register reg[IGA1_VER_ADDR_REG_NUM];
-};
-
-/* IGA1 Vertical Blank Start */
-struct iga1_ver_blank_start {
-	int reg_num;
-	struct io_register reg[IGA1_VER_BLANK_START_REG_NUM];
-};
-
-/* IGA1 Vertical Blank End */
-struct iga1_ver_blank_end {
-	int reg_num;
-	struct io_register reg[IGA1_VER_BLANK_END_REG_NUM];
-};
-
-/* IGA1 Vertical Sync Start */
-struct iga1_ver_sync_start {
-	int reg_num;
-	struct io_register reg[IGA1_VER_SYNC_START_REG_NUM];
-};
-
-/* IGA1 Vertical Sync End */
-struct iga1_ver_sync_end {
-	int reg_num;
-	struct io_register reg[IGA1_VER_SYNC_END_REG_NUM];
-};
-
 /*****************************************************
 **      Define IGA2 Shadow Display Timing         ****
 *****************************************************/
@@ -579,82 +412,6 @@ struct iga2_shadow_ver_sync_end {
 	struct io_register reg[IGA2_SHADOW_VER_SYNC_END_REG_NUM];
 };
 
-/*****************************************************
-**      Define IGA2 Display Timing                ****
-******************************************************/
-
-/* IGA2 Horizontal Total */
-struct iga2_hor_total {
-	int reg_num;
-	struct io_register reg[IGA2_HOR_TOTAL_REG_NUM];
-};
-
-/* IGA2 Horizontal Addressable Video */
-struct iga2_hor_addr {
-	int reg_num;
-	struct io_register reg[IGA2_HOR_ADDR_REG_NUM];
-};
-
-/* IGA2 Horizontal Blank Start */
-struct iga2_hor_blank_start {
-	int reg_num;
-	struct io_register reg[IGA2_HOR_BLANK_START_REG_NUM];
-};
-
-/* IGA2 Horizontal Blank End */
-struct iga2_hor_blank_end {
-	int reg_num;
-	struct io_register reg[IGA2_HOR_BLANK_END_REG_NUM];
-};
-
-/* IGA2 Horizontal Sync Start */
-struct iga2_hor_sync_start {
-	int reg_num;
-	struct io_register reg[IGA2_HOR_SYNC_START_REG_NUM];
-};
-
-/* IGA2 Horizontal Sync End */
-struct iga2_hor_sync_end {
-	int reg_num;
-	struct io_register reg[IGA2_HOR_SYNC_END_REG_NUM];
-};
-
-/* IGA2 Vertical Total */
-struct iga2_ver_total {
-	int reg_num;
-	struct io_register reg[IGA2_VER_TOTAL_REG_NUM];
-};
-
-/* IGA2 Vertical Addressable Video */
-struct iga2_ver_addr {
-	int reg_num;
-	struct io_register reg[IGA2_VER_ADDR_REG_NUM];
-};
-
-/* IGA2 Vertical Blank Start */
-struct iga2_ver_blank_start {
-	int reg_num;
-	struct io_register reg[IGA2_VER_BLANK_START_REG_NUM];
-};
-
-/* IGA2 Vertical Blank End */
-struct iga2_ver_blank_end {
-	int reg_num;
-	struct io_register reg[IGA2_VER_BLANK_END_REG_NUM];
-};
-
-/* IGA2 Vertical Sync Start */
-struct iga2_ver_sync_start {
-	int reg_num;
-	struct io_register reg[IGA2_VER_SYNC_START_REG_NUM];
-};
-
-/* IGA2 Vertical Sync End */
-struct iga2_ver_sync_end {
-	int reg_num;
-	struct io_register reg[IGA2_VER_SYNC_END_REG_NUM];
-};
-
 /* IGA1 Fetch Count Register */
 struct iga1_fetch_count {
 	int reg_num;
@@ -817,21 +574,6 @@ struct display_queue_expire_num {
 	 iga2_display_queue_expire_num_reg;
 };
 
-struct iga1_crtc_timing {
-	struct iga1_hor_total hor_total;
-	struct iga1_hor_addr hor_addr;
-	struct iga1_hor_blank_start hor_blank_start;
-	struct iga1_hor_blank_end hor_blank_end;
-	struct iga1_hor_sync_start hor_sync_start;
-	struct iga1_hor_sync_end hor_sync_end;
-	struct iga1_ver_total ver_total;
-	struct iga1_ver_addr ver_addr;
-	struct iga1_ver_blank_start ver_blank_start;
-	struct iga1_ver_blank_end ver_blank_end;
-	struct iga1_ver_sync_start ver_sync_start;
-	struct iga1_ver_sync_end ver_sync_end;
-};
-
 struct iga2_shadow_crtc_timing {
 	struct iga2_shadow_hor_total hor_total_shadow;
 	struct iga2_shadow_hor_blank_end hor_blank_end_shadow;
@@ -843,21 +585,6 @@ struct iga2_shadow_crtc_timing {
 	struct iga2_shadow_ver_sync_end ver_sync_end_shadow;
 };
 
-struct iga2_crtc_timing {
-	struct iga2_hor_total hor_total;
-	struct iga2_hor_addr hor_addr;
-	struct iga2_hor_blank_start hor_blank_start;
-	struct iga2_hor_blank_end hor_blank_end;
-	struct iga2_hor_sync_start hor_sync_start;
-	struct iga2_hor_sync_end hor_sync_end;
-	struct iga2_ver_total ver_total;
-	struct iga2_ver_addr ver_addr;
-	struct iga2_ver_blank_start ver_blank_start;
-	struct iga2_ver_blank_end ver_blank_end;
-	struct iga2_ver_sync_start ver_sync_start;
-	struct iga2_ver_sync_end ver_sync_end;
-};
-
 /* device ID */
 #define CLE266_FUNCTION3    0x3123
 #define KM400_FUNCTION3     0x3205