uwb: add the i1480 WLP driver

Add the driver for the WLP capability of the Intel i1480 device.

Signed-off-by: David Vrabel <david.vrabel@csr.com>

10 files changed, 2818 insertions, 0 deletions

diff --git a/drivers/uwb/Kconfig b/drivers/uwb/Kconfig
index 59acb5b001d..317e9fefbc0 100644
--- a/drivers/uwb/Kconfig
+++ b/drivers/uwb/Kconfig
@@ -76,4 +76,14 @@ config UWB_I1480U
          To compile this driver select Y (built in) or M (module). It
          is safe to select any even if you do not have the hardware.
 
+config UWB_I1480U_WLP
+        tristate "Support for Intel Wireless UWB Link 1480 HWA's WLP interface"
+        depends on UWB_I1480U &&  UWB_WLP && NET
+        help
+         This driver enables WLP support for the i1480 when connected via
+         USB. WLP is the WiMedia Link Protocol, or IP over UWB.
+
+         To compile this driver select Y (built in) or M (module). It
+         is safe to select any even if you don't have the hardware.
+
 endif # UWB
diff --git a/drivers/uwb/i1480/Makefile b/drivers/uwb/i1480/Makefile
index d69da1684cf..212bbc7d4c3 100644
--- a/drivers/uwb/i1480/Makefile
+++ b/drivers/uwb/i1480/Makefile
@@ -1 +1,2 @@
 obj-$(CONFIG_UWB_I1480U)	+= dfu/ i1480-est.o
+obj-$(CONFIG_UWB_I1480U_WLP)	+= i1480u-wlp/
diff --git a/drivers/uwb/i1480/i1480-wlp.h b/drivers/uwb/i1480/i1480-wlp.h
new file mode 100644
index 00000000000..18a8b0e4567
--- /dev/null
+++ b/drivers/uwb/i1480/i1480-wlp.h
@@ -0,0 +1,200 @@
+/*
+ * Intel 1480 Wireless UWB Link
+ * WLP specific definitions
+ *
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+
+#ifndef __i1480_wlp_h__
+#define __i1480_wlp_h__
+
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/uwb.h>
+#include <linux/if_ether.h>
+#include <asm/byteorder.h>
+
+/* New simplified header format? */
+#undef WLP_HDR_FMT_2 		/* FIXME: rename */
+
+/**
+ * Values of the Delivery ID & Type field when PCA or DRP
+ *
+ * The Delivery ID & Type field in the WLP TX header indicates whether
+ * the frame is PCA or DRP. This is done based on the high level bit of
+ * this field.
+ * We use this constant to test if the traffic is PCA or DRP as follows:
+ * if (wlp_tx_hdr_delivery_id_type(wlp_tx_hdr) & WLP_DRP)
+ * 	this is DRP traffic
+ * else
+ * 	this is PCA traffic
+ */
+enum deliver_id_type_bit {
+	WLP_DRP = 8,
+};
+
+/**
+ * WLP TX header
+ *
+ * Indicates UWB/WLP-specific transmission parameters for a network
+ * packet.
+ */
+struct wlp_tx_hdr {
+	/* dword 0 */
+	struct uwb_dev_addr dstaddr;
+	u8                  key_index;
+	u8                  mac_params;
+	/* dword 1 */
+	u8                  phy_params;
+#ifndef WLP_HDR_FMT_2
+	u8                  reserved;
+	__le16              oui01;              /* FIXME: not so sure if __le16 or u8[2] */
+	/* dword 2 */
+	u8                  oui2;               /*        if all LE, it could be merged */
+	__le16              prid;
+#endif
+} __attribute__((packed));
+
+static inline int wlp_tx_hdr_delivery_id_type(const struct wlp_tx_hdr *hdr)
+{
+	return hdr->mac_params & 0x0f;
+}
+
+static inline int wlp_tx_hdr_ack_policy(const struct wlp_tx_hdr *hdr)
+{
+	return (hdr->mac_params >> 4) & 0x07;
+}
+
+static inline int wlp_tx_hdr_rts_cts(const struct wlp_tx_hdr *hdr)
+{
+	return (hdr->mac_params >> 7) & 0x01;
+}
+
+static inline void wlp_tx_hdr_set_delivery_id_type(struct wlp_tx_hdr *hdr, int id)
+{
+	hdr->mac_params = (hdr->mac_params & ~0x0f) | id;
+}
+
+static inline void wlp_tx_hdr_set_ack_policy(struct wlp_tx_hdr *hdr,
+					     enum uwb_ack_pol policy)
+{
+	hdr->mac_params = (hdr->mac_params & ~0x70) | (policy << 4);
+}
+
+static inline void wlp_tx_hdr_set_rts_cts(struct wlp_tx_hdr *hdr, int rts_cts)
+{
+	hdr->mac_params = (hdr->mac_params & ~0x80) | (rts_cts << 7);
+}
+
+static inline enum uwb_phy_rate wlp_tx_hdr_phy_rate(const struct wlp_tx_hdr *hdr)
+{
+	return hdr->phy_params & 0x0f;
+}
+
+static inline int wlp_tx_hdr_tx_power(const struct wlp_tx_hdr *hdr)
+{
+	return (hdr->phy_params >> 4) & 0x0f;
+}
+
+static inline void wlp_tx_hdr_set_phy_rate(struct wlp_tx_hdr *hdr, enum uwb_phy_rate rate)
+{
+	hdr->phy_params = (hdr->phy_params & ~0x0f) | rate;
+}
+
+static inline void wlp_tx_hdr_set_tx_power(struct wlp_tx_hdr *hdr, int pwr)
+{
+	hdr->phy_params = (hdr->phy_params & ~0xf0) | (pwr << 4);
+}
+
+
+/**
+ * WLP RX header
+ *
+ * Provides UWB/WLP-specific transmission data for a received
+ * network packet.
+ */
+struct wlp_rx_hdr {
+	/* dword 0 */
+	struct uwb_dev_addr dstaddr;
+	struct uwb_dev_addr srcaddr;
+	/* dword 1 */
+	u8 		    LQI;
+	s8		    RSSI;
+	u8		    reserved3;
+#ifndef WLP_HDR_FMT_2
+	u8 		    oui0;
+	/* dword 2 */
+	__le16		    oui12;
+	__le16		    prid;
+#endif
+} __attribute__((packed));
+
+
+/** User configurable options for WLP */
+struct wlp_options {
+	struct mutex mutex; /* access to user configurable options*/
+	struct wlp_tx_hdr def_tx_hdr;	/* default tx hdr */
+	u8 pca_base_priority;
+	u8 bw_alloc; /*index into bw_allocs[] for PCA/DRP reservations*/
+};
+
+
+static inline
+void wlp_options_init(struct wlp_options *options)
+{
+	mutex_init(&options->mutex);
+	wlp_tx_hdr_set_ack_policy(&options->def_tx_hdr, UWB_ACK_INM);
+	wlp_tx_hdr_set_rts_cts(&options->def_tx_hdr, 1);
+	/* FIXME: default to phy caps */
+	wlp_tx_hdr_set_phy_rate(&options->def_tx_hdr, UWB_PHY_RATE_480);
+#ifndef WLP_HDR_FMT_2
+	options->def_tx_hdr.prid = cpu_to_le16(0x0000);
+#endif
+}
+
+
+/* sysfs helpers */
+
+extern ssize_t uwb_pca_base_priority_store(struct wlp_options *,
+					   const char *, size_t);
+extern ssize_t uwb_pca_base_priority_show(const struct wlp_options *, char *);
+extern ssize_t uwb_bw_alloc_store(struct wlp_options *, const char *, size_t);
+extern ssize_t uwb_bw_alloc_show(const struct wlp_options *, char *);
+extern ssize_t uwb_ack_policy_store(struct wlp_options *,
+				    const char *, size_t);
+extern ssize_t uwb_ack_policy_show(const struct wlp_options *, char *);
+extern ssize_t uwb_rts_cts_store(struct wlp_options *, const char *, size_t);
+extern ssize_t uwb_rts_cts_show(const struct wlp_options *, char *);
+extern ssize_t uwb_phy_rate_store(struct wlp_options *, const char *, size_t);
+extern ssize_t uwb_phy_rate_show(const struct wlp_options *, char *);
+
+
+/** Simple bandwidth allocation (temporary and too simple) */
+struct wlp_bw_allocs {
+	const char *name;
+	struct {
+		u8 mask, stream;
+	} tx, rx;
+};
+
+
+#endif /* #ifndef __i1480_wlp_h__ */
diff --git a/drivers/uwb/i1480/i1480u-wlp/Makefile b/drivers/uwb/i1480/i1480u-wlp/Makefile
new file mode 100644
index 00000000000..fe6709b8e68
--- /dev/null
+++ b/drivers/uwb/i1480/i1480u-wlp/Makefile
@@ -0,0 +1,8 @@
+obj-$(CONFIG_UWB_I1480U_WLP) += i1480u-wlp.o
+
+i1480u-wlp-objs :=	\
+	lc.o		\
+	netdev.o	\
+	rx.o		\
+	sysfs.o		\
+	tx.o
diff --git a/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h b/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h
new file mode 100644
index 00000000000..5f1b2951bb8
--- /dev/null
+++ b/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h
@@ -0,0 +1,284 @@
+/*
+ * Intel 1480 Wireless UWB Link USB
+ * Header formats, constants, general internal interfaces
+ *
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This is not an standard interface.
+ *
+ * FIXME: docs
+ *
+ * i1480u-wlp is pretty simple: two endpoints, one for tx, one for
+ * rx. rx is polled. Network packets (ethernet, whatever) are wrapped
+ * in i1480 TX or RX headers (for sending over the air), and these
+ * packets are wrapped in UNTD headers (for sending to the WLP UWB
+ * controller).
+ *
+ * UNTD packets (UNTD hdr + i1480 hdr + network packet) packets
+ * cannot be bigger than i1480u_MAX_FRG_SIZE. When this happens, the
+ * i1480 packet is broken in chunks/packets:
+ *
+ * UNTD-1st.hdr + i1480.hdr + payload
+ * UNTD-next.hdr + payload
+ * ...
+ * UNTD-last.hdr + payload
+ *
+ * so that each packet is smaller or equal than i1480u_MAX_FRG_SIZE.
+ *
+ * All HW structures and bitmaps are little endian, so we need to play
+ * ugly tricks when defining bitfields. Hoping for the day GCC
+ * implements __attribute__((endian(1234))).
+ *
+ * FIXME: ROADMAP to the whole implementation
+ */
+
+#ifndef __i1480u_wlp_h__
+#define __i1480u_wlp_h__
+
+#include <linux/usb.h>
+#include <linux/netdevice.h>
+#include <linux/uwb.h>		/* struct uwb_rc, struct uwb_notifs_handler */
+#include <linux/wlp.h>
+#include "../i1480-wlp.h"
+
+#undef i1480u_FLOW_CONTROL	/* Enable flow control code */
+
+/**
+ * Basic flow control
+ */
+enum {
+	i1480u_TX_INFLIGHT_MAX = 1000,
+	i1480u_TX_INFLIGHT_THRESHOLD = 100,
+};
+
+/** Maximum size of a transaction that we can tx/rx */
+enum {
+	/* Maximum packet size computed as follows: max UNTD header (8) +
+	 * i1480 RX header (8) + max Ethernet header and payload (4096) +
+	 * Padding added by skb_reserve (2) to make post Ethernet payload
+	 * start on 16 byte boundary*/
+	i1480u_MAX_RX_PKT_SIZE = 4114,
+	i1480u_MAX_FRG_SIZE = 512,
+	i1480u_RX_BUFS = 9,
+};
+
+
+/**
+ * UNTD packet type
+ *
+ * We need to fragment any payload whose UNTD packet is going to be
+ * bigger than i1480u_MAX_FRG_SIZE.
+ */
+enum i1480u_pkt_type {
+	i1480u_PKT_FRAG_1ST = 0x1,
+	i1480u_PKT_FRAG_NXT = 0x0,
+	i1480u_PKT_FRAG_LST = 0x2,
+	i1480u_PKT_FRAG_CMP = 0x3
+};
+enum {
+	i1480u_PKT_NONE = 0x4,
+};
+
+/** USB Network Transfer Descriptor - common */
+struct untd_hdr {
+	u8     type;
+	__le16 len;
+} __attribute__((packed));
+
+static inline enum i1480u_pkt_type untd_hdr_type(const struct untd_hdr *hdr)
+{
+	return hdr->type & 0x03;
+}
+
+static inline int untd_hdr_rx_tx(const struct untd_hdr *hdr)
+{
+	return (hdr->type >> 2) & 0x01;
+}
+
+static inline void untd_hdr_set_type(struct untd_hdr *hdr, enum i1480u_pkt_type type)
+{
+	hdr->type = (hdr->type & ~0x03) | type;
+}
+
+static inline void untd_hdr_set_rx_tx(struct untd_hdr *hdr, int rx_tx)
+{
+	hdr->type = (hdr->type & ~0x04) | (rx_tx << 2);
+}
+
+
+/**
+ * USB Network Transfer Descriptor - Complete Packet
+ *
+ * This is for a packet that is smaller (header + payload) than
+ * i1480u_MAX_FRG_SIZE.
+ *
+ * @hdr.total_len is the size of the payload; the payload doesn't
+ * count this header nor the padding, but includes the size of i1480
+ * header.
+ */
+struct untd_hdr_cmp {
+	struct untd_hdr	hdr;
+	u8		padding;
+} __attribute__((packed));
+
+
+/**
+ * USB Network Transfer Descriptor - First fragment
+ *
+ * @hdr.len is the size of the *whole packet* (excluding UNTD
+ * headers); @fragment_len is the size of the payload (excluding UNTD
+ * headers, but including i1480 headers).
+ */
+struct untd_hdr_1st {
+	struct untd_hdr	hdr;
+	__le16		fragment_len;
+	u8		padding[3];
+} __attribute__((packed));
+
+
+/**
+ * USB Network Transfer Descriptor - Next / Last [Rest]
+ *
+ * @hdr.len is the size of the payload, not including headrs.
+ */
+struct untd_hdr_rst {
+	struct untd_hdr	hdr;
+	u8		padding;
+} __attribute__((packed));
+
+
+/**
+ * Transmission context
+ *
+ * Wraps all the stuff needed to track a pending/active tx
+ * operation.
+ */
+struct i1480u_tx {
+	struct list_head list_node;
+	struct i1480u *i1480u;
+	struct urb *urb;
+
+	struct sk_buff *skb;
+	struct wlp_tx_hdr *wlp_tx_hdr;
+
+	void *buf;	/* if NULL, no new buf was used */
+	size_t buf_size;
+};
+
+/**
+ * Basic flow control
+ *
+ * We maintain a basic flow control counter. "count" how many TX URBs are
+ * outstanding. Only allow "max"
+ * TX URBs to be outstanding. If this value is reached the queue will be
+ * stopped. The queue will be restarted when there are
+ * "threshold" URBs outstanding.
+ * Maintain a counter of how many time the TX queue needed to be restarted
+ * due to the "max" being exceeded and the "threshold" reached again. The
+ * timestamp "restart_ts" is to keep track from when the counter was last
+ * queried (see sysfs handling of file wlp_tx_inflight).
+ */
+struct i1480u_tx_inflight {
+	atomic_t count;
+	unsigned long max;
+	unsigned long threshold;
+	unsigned long restart_ts;
+	atomic_t restart_count;
+};
+
+/**
+ * Instance of a i1480u WLP interface
+ *
+ * Keeps references to the USB device that wraps it, as well as it's
+ * interface and associated UWB host controller. As well, it also
+ * keeps a link to the netdevice for integration into the networking
+ * stack.
+ * We maintian separate error history for the tx and rx endpoints because
+ * the implementation does not rely on locking - having one shared
+ * structure between endpoints may cause problems. Adding locking to the
+ * implementation will have higher cost than adding a separate structure.
+ */
+struct i1480u {
+	struct usb_device *usb_dev;
+	struct usb_interface *usb_iface;
+	struct net_device *net_dev;
+
+	spinlock_t lock;
+	struct net_device_stats stats;
+
+	/* RX context handling */
+	struct sk_buff *rx_skb;
+	struct uwb_dev_addr rx_srcaddr;
+	size_t rx_untd_pkt_size;
+	struct i1480u_rx_buf {
+		struct i1480u *i1480u;	/* back pointer */
+		struct urb *urb;
+		struct sk_buff *data;	/* i1480u_MAX_RX_PKT_SIZE each */
+	} rx_buf[i1480u_RX_BUFS];	/* N bufs */
+
+	spinlock_t tx_list_lock;	/* TX context */
+	struct list_head tx_list;
+	u8 tx_stream;
+
+	struct stats lqe_stats, rssi_stats;	/* radio statistics */
+
+	/* Options we can set from sysfs */
+	struct wlp_options options;
+	struct uwb_notifs_handler uwb_notifs_handler;
+	struct edc tx_errors;
+	struct edc rx_errors;
+	struct wlp wlp;
+#ifdef i1480u_FLOW_CONTROL
+	struct urb *notif_urb;
+	struct edc notif_edc;		/* error density counter */
+	u8 notif_buffer[1];
+#endif
+	struct i1480u_tx_inflight tx_inflight;
+};
+
+/* Internal interfaces */
+extern void i1480u_rx_cb(struct urb *urb);
+extern int i1480u_rx_setup(struct i1480u *);
+extern void i1480u_rx_release(struct i1480u *);
+extern void i1480u_tx_release(struct i1480u *);
+extern int i1480u_xmit_frame(struct wlp *, struct sk_buff *,
+			     struct uwb_dev_addr *);
+extern void i1480u_stop_queue(struct wlp *);
+extern void i1480u_start_queue(struct wlp *);
+extern int i1480u_sysfs_setup(struct i1480u *);
+extern void i1480u_sysfs_release(struct i1480u *);
+
+/* netdev interface */
+extern int i1480u_open(struct net_device *);
+extern int i1480u_stop(struct net_device *);
+extern int i1480u_hard_start_xmit(struct sk_buff *, struct net_device *);
+extern void i1480u_tx_timeout(struct net_device *);
+extern int i1480u_set_config(struct net_device *, struct ifmap *);
+extern struct net_device_stats *i1480u_get_stats(struct net_device *);
+extern int i1480u_change_mtu(struct net_device *, int);
+extern void i1480u_uwb_notifs_cb(void *, struct uwb_dev *, enum uwb_notifs);
+
+/* bandwidth allocation callback */
+extern void  i1480u_bw_alloc_cb(struct uwb_rsv *);
+
+/* Sys FS */
+extern struct attribute_group i1480u_wlp_attr_group;
+
+#endif /* #ifndef __i1480u_wlp_h__ */
diff --git a/drivers/uwb/i1480/i1480u-wlp/lc.c b/drivers/uwb/i1480/i1480u-wlp/lc.c
new file mode 100644
index 00000000000..737d60cd5b7
--- /dev/null
+++ b/drivers/uwb/i1480/i1480u-wlp/lc.c
@@ -0,0 +1,421 @@
+/*
+ * WUSB Wire Adapter: WLP interface
+ * Driver for the Linux Network stack.
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ *
+ * This implements a very simple network driver for the WLP USB
+ * device that is associated to a UWB (Ultra Wide Band) host.
+ *
+ * This is seen as an interface of a composite device. Once the UWB
+ * host has an association to another WLP capable device, the
+ * networking interface (aka WLP) can start to send packets back and
+ * forth.
+ *
+ * Limitations:
+ *
+ *  - Hand cranked; can't ifup the interface until there is an association
+ *
+ *  - BW allocation very simplistic [see i1480u_mas_set() and callees].
+ *
+ *
+ * ROADMAP:
+ *
+ *   ENTRY POINTS (driver model):
+ *
+ *     i1480u_driver_{exit,init}(): initialization of the driver.
+ *
+ *     i1480u_probe(): called by the driver code when a device
+ *                     matching 'i1480u_id_table' is connected.
+ *
+ *                     This allocs a netdev instance, inits with
+ *                     i1480u_add(), then registers_netdev().
+ *         i1480u_init()
+ *         i1480u_add()
+ *
+ *     i1480u_disconnect(): device has been disconnected/module
+ *                          is being removed.
+ *         i1480u_rm()
+ */
+#include <linux/version.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/uwb/debug.h>
+#include "i1480u-wlp.h"
+
+
+
+static inline
+void i1480u_init(struct i1480u *i1480u)
+{
+	/* nothing so far... doesn't it suck? */
+	spin_lock_init(&i1480u->lock);
+	INIT_LIST_HEAD(&i1480u->tx_list);
+	spin_lock_init(&i1480u->tx_list_lock);
+	wlp_options_init(&i1480u->options);
+	edc_init(&i1480u->tx_errors);
+	edc_init(&i1480u->rx_errors);
+#ifdef i1480u_FLOW_CONTROL
+	edc_init(&i1480u->notif_edc);
+#endif
+	stats_init(&i1480u->lqe_stats);
+	stats_init(&i1480u->rssi_stats);
+	wlp_init(&i1480u->wlp);
+}
+
+/**
+ * Fill WLP device information structure
+ *
+ * The structure will contain a few character arrays, each ending with a
+ * null terminated string. Each string has to fit (excluding terminating
+ * character) into a specified range obtained from the WLP substack.
+ *
+ * It is still not clear exactly how this device information should be
+ * obtained. Until we find out we use the USB device descriptor as backup, some
+ * information elements have intuitive mappings, other not.
+ */
+static
+void i1480u_fill_device_info(struct wlp *wlp, struct wlp_device_info *dev_info)
+{
+	struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp);
+	struct usb_device *usb_dev = i1480u->usb_dev;
+	/* Treat device name and model name the same */
+	if (usb_dev->descriptor.iProduct) {
+		usb_string(usb_dev, usb_dev->descriptor.iProduct,
+			   dev_info->name, sizeof(dev_info->name));
+		usb_string(usb_dev, usb_dev->descriptor.iProduct,
+			   dev_info->model_name, sizeof(dev_info->model_name));
+	}
+	if (usb_dev->descriptor.iManufacturer)
+		usb_string(usb_dev, usb_dev->descriptor.iManufacturer,
+			   dev_info->manufacturer,
+			   sizeof(dev_info->manufacturer));
+	scnprintf(dev_info->model_nr, sizeof(dev_info->model_nr), "%04x",
+		  __le16_to_cpu(usb_dev->descriptor.bcdDevice));
+	if (usb_dev->descriptor.iSerialNumber)
+		usb_string(usb_dev, usb_dev->descriptor.iSerialNumber,
+			   dev_info->serial, sizeof(dev_info->serial));
+	/* FIXME: where should we obtain category? */
+	dev_info->prim_dev_type.category = cpu_to_le16(WLP_DEV_CAT_OTHER);
+	/* FIXME: Complete OUI and OUIsubdiv attributes */
+}
+
+#ifdef i1480u_FLOW_CONTROL
+/**
+ * Callback for the notification endpoint
+ *
+ * This mostly controls the xon/xoff protocol. In case of hard error,
+ * we stop the queue. If not, we always retry.
+ */
+static
+void i1480u_notif_cb(struct urb *urb, struct pt_regs *regs)
+{
+	struct i1480u *i1480u = urb->context;
+	struct usb_interface *usb_iface = i1480u->usb_iface;
+	struct device *dev = &usb_iface->dev;
+	int result;
+
+	switch (urb->status) {
+	case 0:				/* Got valid data, do xon/xoff */
+		switch (i1480u->notif_buffer[0]) {
+		case 'N':
+			dev_err(dev, "XOFF STOPPING queue at %lu\n", jiffies);
+			netif_stop_queue(i1480u->net_dev);
+			break;
+		case 'A':
+			dev_err(dev, "XON STARTING queue at %lu\n", jiffies);
+			netif_start_queue(i1480u->net_dev);
+			break;
+		default:
+			dev_err(dev, "NEP: unknown data 0x%02hhx\n",
+				i1480u->notif_buffer[0]);
+		}
+		break;
+	case -ECONNRESET:		/* Controlled situation ... */
+	case -ENOENT:			/* we killed the URB... */
+		dev_err(dev, "NEP: URB reset/noent %d\n", urb->status);
+		goto error;
+	case -ESHUTDOWN:		/* going away! */
+		dev_err(dev, "NEP: URB down %d\n", urb->status);
+		goto error;
+	default:			/* Retry unless it gets ugly */
+		if (edc_inc(&i1480u->notif_edc, EDC_MAX_ERRORS,
+			    EDC_ERROR_TIMEFRAME)) {
+			dev_err(dev, "NEP: URB max acceptable errors "
+				"exceeded; resetting device\n");
+			goto error_reset;
+		}
+		dev_err(dev, "NEP: URB error %d\n", urb->status);
+		break;
+	}
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result < 0) {
+		dev_err(dev, "NEP: Can't resubmit URB: %d; resetting device\n",
+			result);
+		goto error_reset;
+	}
+	return;
+
+error_reset:
+	wlp_reset_all(&i1480-wlp);
+error:
+	netif_stop_queue(i1480u->net_dev);
+	return;
+}
+#endif
+
+static
+int i1480u_add(struct i1480u *i1480u, struct usb_interface *iface)
+{
+	int result = -ENODEV;
+	struct wlp *wlp = &i1480u->wlp;
+	struct usb_device *usb_dev = interface_to_usbdev(iface);
+	struct net_device *net_dev = i1480u->net_dev;
+	struct uwb_rc *rc;
+	struct uwb_dev *uwb_dev;
+#ifdef i1480u_FLOW_CONTROL
+	struct usb_endpoint_descriptor *epd;
+#endif
+
+	i1480u->usb_dev = usb_get_dev(usb_dev);
+	i1480u->usb_iface = iface;
+	rc = uwb_rc_get_by_grandpa(&i1480u->usb_dev->dev);
+	if (rc == NULL) {
+		dev_err(&iface->dev, "Cannot get associated UWB Radio "
+			"Controller\n");
+		goto out;
+	}
+	wlp->xmit_frame = i1480u_xmit_frame;
+	wlp->fill_device_info = i1480u_fill_device_info;
+	wlp->stop_queue = i1480u_stop_queue;
+	wlp->start_queue = i1480u_start_queue;
+	result = wlp_setup(wlp, rc);
+	if (result < 0) {
+		dev_err(&iface->dev, "Cannot setup WLP\n");
+		goto error_wlp_setup;
+	}
+	result = 0;
+	ether_setup(net_dev);			/* make it an etherdevice */
+	uwb_dev = &rc->uwb_dev;
+	/* FIXME: hookup address change notifications? */
+
+	memcpy(net_dev->dev_addr, uwb_dev->mac_addr.data,
+	       sizeof(net_dev->dev_addr));
+
+	net_dev->hard_header_len = sizeof(struct untd_hdr_cmp)
+		+ sizeof(struct wlp_tx_hdr)
+		+ WLP_DATA_HLEN
+		+ ETH_HLEN;
+	net_dev->mtu = 3500;
+	net_dev->tx_queue_len = 20;		/* FIXME: maybe use 1000? */
+
+/*	net_dev->flags &= ~IFF_BROADCAST;	FIXME: BUG in firmware */
+	/* FIXME: multicast disabled */
+	net_dev->flags &= ~IFF_MULTICAST;
+	net_dev->features &= ~NETIF_F_SG;
+	net_dev->features &= ~NETIF_F_FRAGLIST;
+	/* All NETIF_F_*_CSUM disabled */
+	net_dev->features |= NETIF_F_HIGHDMA;
+	net_dev->watchdog_timeo = 5*HZ;		/* FIXME: a better default? */
+
+	net_dev->open = i1480u_open;
+	net_dev->stop = i1480u_stop;
+	net_dev->hard_start_xmit = i1480u_hard_start_xmit;
+	net_dev->tx_timeout = i1480u_tx_timeout;
+	net_dev->get_stats = i1480u_get_stats;
+	net_dev->set_config = i1480u_set_config;
+	net_dev->change_mtu = i1480u_change_mtu;
+
+#ifdef i1480u_FLOW_CONTROL
+	/* Notification endpoint setup (submitted when we open the device) */
+	i1480u->notif_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (i1480u->notif_urb == NULL) {
+		dev_err(&iface->dev, "Unable to allocate notification URB\n");
+		result = -ENOMEM;
+		goto error_urb_alloc;
+	}
+	epd = &iface->cur_altsetting->endpoint[0].desc;
+	usb_fill_int_urb(i1480u->notif_urb, usb_dev,
+			 usb_rcvintpipe(usb_dev, epd->bEndpointAddress),
+			 i1480u->notif_buffer, sizeof(i1480u->notif_buffer),
+			 i1480u_notif_cb, i1480u, epd->bInterval);
+
+#endif
+
+	i1480u->tx_inflight.max = i1480u_TX_INFLIGHT_MAX;
+	i1480u->tx_inflight.threshold = i1480u_TX_INFLIGHT_THRESHOLD;
+	i1480u->tx_inflight.restart_ts = jiffies;
+	usb_set_intfdata(iface, i1480u);
+	return result;
+
+#ifdef i1480u_FLOW_CONTROL
+error_urb_alloc:
+#endif
+	wlp_remove(wlp);
+error_wlp_setup:
+	uwb_rc_put(rc);
+out:
+	usb_put_dev(i1480u->usb_dev);
+	return result;
+}
+
+static void i1480u_rm(struct i1480u *i1480u)
+{
+	struct uwb_rc *rc = i1480u->wlp.rc;
+	usb_set_intfdata(i1480u->usb_iface, NULL);
+#ifdef i1480u_FLOW_CONTROL
+	usb_kill_urb(i1480u->notif_urb);
+	usb_free_urb(i1480u->notif_urb);
+#endif
+	wlp_remove(&i1480u->wlp);
+	uwb_rc_put(rc);
+	usb_put_dev(i1480u->usb_dev);
+}
+
+/** Just setup @net_dev's i1480u private data */
+static void i1480u_netdev_setup(struct net_device *net_dev)
+{
+	struct i1480u *i1480u = netdev_priv(net_dev);
+	/* Initialize @i1480u */
+	memset(i1480u, 0, sizeof(*i1480u));
+	i1480u_init(i1480u);
+}
+
+/**
+ * Probe a i1480u interface and register it
+ *
+ * @iface:   USB interface to link to
+ * @id:      USB class/subclass/protocol id
+ * @returns: 0 if ok, < 0 errno code on error.
+ *
+ * Does basic housekeeping stuff and then allocs a netdev with space
+ * for the i1480u  data. Initializes, registers in i1480u, registers in
+ * netdev, ready to go.
+ */
+static int i1480u_probe(struct usb_interface *iface,
+			const struct usb_device_id *id)
+{
+	int result;
+	struct net_device *net_dev;
+	struct device *dev = &iface->dev;
+	struct i1480u *i1480u;
+
+	/* Allocate instance [calls i1480u_netdev_setup() on it] */
+	result = -ENOMEM;
+	net_dev = alloc_netdev(sizeof(*i1480u), "wlp%d", i1480u_netdev_setup);
+	if (net_dev == NULL) {
+		dev_err(dev, "no memory for network device instance\n");
+		goto error_alloc_netdev;
+	}
+	SET_NETDEV_DEV(net_dev, dev);
+	i1480u = netdev_priv(net_dev);
+	i1480u->net_dev = net_dev;
+	result = i1480u_add(i1480u, iface);	/* Now setup all the wlp stuff */
+	if (result < 0) {
+		dev_err(dev, "cannot add i1480u device: %d\n", result);
+		goto error_i1480u_add;
+	}
+	result = register_netdev(net_dev);	/* Okey dokey, bring it up */
+	if (result < 0) {
+		dev_err(dev, "cannot register network device: %d\n", result);
+		goto error_register_netdev;
+	}
+	i1480u_sysfs_setup(i1480u);
+	if (result < 0)
+		goto error_sysfs_init;
+	return 0;
+
+error_sysfs_init:
+	unregister_netdev(net_dev);
+error_register_netdev:
+	i1480u_rm(i1480u);
+error_i1480u_add:
+	free_netdev(net_dev);
+error_alloc_netdev:
+	return result;
+}
+
+
+/**
+ * Disconect a i1480u from the system.
+ *
+ * i1480u_stop() has been called before, so al the rx and tx contexts
+ * have been taken down already. Make sure the queue is stopped,
+ * unregister netdev and i1480u, free and kill.
+ */
+static void i1480u_disconnect(struct usb_interface *iface)
+{
+	struct i1480u *i1480u;
+	struct net_device *net_dev;
+
+	i1480u = usb_get_intfdata(iface);
+	net_dev = i1480u->net_dev;
+	netif_stop_queue(net_dev);
+#ifdef i1480u_FLOW_CONTROL
+	usb_kill_urb(i1480u->notif_urb);
+#endif
+	i1480u_sysfs_release(i1480u);
+	unregister_netdev(net_dev);
+	i1480u_rm(i1480u);
+	free_netdev(net_dev);
+}
+
+static struct usb_device_id i1480u_id_table[] = {
+	{
+		.match_flags = USB_DEVICE_ID_MATCH_DEVICE \
+				|  USB_DEVICE_ID_MATCH_DEV_INFO \
+				|  USB_DEVICE_ID_MATCH_INT_INFO,
+		.idVendor = 0x8086,
+		.idProduct = 0x0c3b,
+		.bDeviceClass = 0xef,
+		.bDeviceSubClass = 0x02,
+		.bDeviceProtocol = 0x02,
+		.bInterfaceClass = 0xff,
+		.bInterfaceSubClass = 0xff,
+		.bInterfaceProtocol = 0xff,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(usb, i1480u_id_table);
+
+static struct usb_driver i1480u_driver = {
+	.name =		KBUILD_MODNAME,
+	.probe =	i1480u_probe,
+	.disconnect =	i1480u_disconnect,
+	.id_table =	i1480u_id_table,
+};
+
+static int __init i1480u_driver_init(void)
+{
+	return usb_register(&i1480u_driver);
+}
+module_init(i1480u_driver_init);
+
+
+static void __exit i1480u_driver_exit(void)
+{
+	usb_deregister(&i1480u_driver);
+}
+module_exit(i1480u_driver_exit);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("i1480 Wireless UWB Link WLP networking for USB");
+MODULE_LICENSE("GPL");
diff --git a/drivers/uwb/i1480/i1480u-wlp/netdev.c b/drivers/uwb/i1480/i1480u-wlp/netdev.c
new file mode 100644
index 00000000000..8802ac43d87
--- /dev/null
+++ b/drivers/uwb/i1480/i1480u-wlp/netdev.c
@@ -0,0 +1,368 @@
+/*
+ * WUSB Wire Adapter: WLP interface
+ * Driver for the Linux Network stack.
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ *
+ * Implementation of the netdevice linkage (except tx and rx related stuff).
+ *
+ * ROADMAP:
+ *
+ *   ENTRY POINTS (Net device):
+ *
+ *     i1480u_open(): Called when we ifconfig up the interface;
+ *                    associates to a UWB host controller, reserves
+ *                    bandwidth (MAS), sets up RX USB URB and starts
+ *                    the queue.
+ *
+ *     i1480u_stop(): Called when we ifconfig down a interface;
+ *                    reverses _open().
+ *
+ *     i1480u_set_config():
+ */
+
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/uwb/debug.h>
+#include "i1480u-wlp.h"
+
+struct i1480u_cmd_set_ip_mas {
+	struct uwb_rccb     rccb;
+	struct uwb_dev_addr addr;
+	u8                  stream;
+	u8                  owner;
+	u8                  type;	/* enum uwb_drp_type */
+	u8                  baMAS[32];
+} __attribute__((packed));
+
+