Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid: (21 commits)
  USB HID: don't warn on idVendor == 0
  USB HID: add 'quirks' module parameter
  USB HID: add support for dynamically-created quirks
  USB HID: clarify static quirk handling as squirks
  USB HID: encapsulate quirk handling into hid-quirks.c
  USB HID: EMS USBII device needs HID_QUIRK_MULTI_INPUT
  HID: update copyright and authorship macro
  HID: introduce proper zeroing of unused bits in output reports
  USB HID: add support for WiseGroup MP-8800 Quad Joypad
  USB HID: add FF support for Logitech Force 3D Pro Joystick
  USB HID: numlock quirk for dell W7658 keyboard
  USB HID: Logitech MX3000 keyboard needs report descriptor quirk
  USB HID: extend quirk for Logitech S510 keyboard
  USB HID: usbkbd/usbmouse - handle errors when registering devices
  USB HID: add QUIRK_HIDDEV for Belkin Flip KVM
  HID: enable dead keys on a belkin wireless keyboard
  USB HID: Thustmaster firestorm dual power v1 support
  USB HID: specify explicit size for hid_blacklist.quirks
  USB HID: fix retry & reset logic
  USB HID: consolidate vendor/product ids
  ...

14 files changed, 0 insertions, 5151 deletions

diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index c1b0affae29..f5de58a63f2 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -26,10 +26,7 @@ obj-$(CONFIG_USB)		+= storage/
 obj-$(CONFIG_USB_ACECAD)	+= input/
 obj-$(CONFIG_USB_AIPTEK)	+= input/
 obj-$(CONFIG_USB_ATI_REMOTE)	+= input/
-obj-$(CONFIG_USB_HID)		+= input/
-obj-$(CONFIG_USB_KBD)		+= input/
 obj-$(CONFIG_USB_KBTAB)		+= input/
-obj-$(CONFIG_USB_MOUSE)		+= input/
 obj-$(CONFIG_USB_MTOUCH)	+= input/
 obj-$(CONFIG_USB_POWERMATE)	+= input/
 obj-$(CONFIG_USB_WACOM)		+= input/
diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig
index 69a9f3b6d0a..a792e42f58a 100644
--- a/drivers/usb/input/Kconfig
+++ b/drivers/usb/input/Kconfig
@@ -4,151 +4,6 @@
 comment "USB Input Devices"
 	depends on USB
 
-config USB_HID
-	tristate "USB Human Interface Device (full HID) support"
-	default y
-	depends on USB && INPUT
-	select HID
-	---help---
-	  Say Y here if you want full HID support to connect USB keyboards,
-	  mice, joysticks, graphic tablets, or any other HID based devices
-	  to your computer via USB, as well as Uninterruptible Power Supply
-	  (UPS) and monitor control devices.
-
-	  You can't use this driver and the HIDBP (Boot Protocol) keyboard
-	  and mouse drivers at the same time. More information is available:
-	  <file:Documentation/input/input.txt>.
-
-	  If unsure, say Y.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called usbhid.
-
-comment "Input core support is needed for USB HID input layer or HIDBP support"
-	depends on USB_HID && INPUT=n
-
-config USB_HIDINPUT_POWERBOOK
-	bool "Enable support for iBook/PowerBook special keys"
-	default n
-	depends on USB_HID
-	help
-	  Say Y here if you want support for the special keys (Fn, Numlock) on
-	  Apple iBooks and PowerBooks.
-
-	  If unsure, say N.
-
-config HID_FF
-	bool "Force feedback support (EXPERIMENTAL)"
-	depends on USB_HID && EXPERIMENTAL
-	help
-	  Say Y here is you want force feedback support for a few HID devices.
-	  See below for a list of supported devices.
-
-	  See <file:Documentation/input/ff.txt> for a description of the force
-	  feedback API.
-
-	  If unsure, say N.
-
-config HID_PID
-	bool "PID device support"
-	depends on HID_FF
-	help
-	  Say Y here if you have a PID-compliant device and wish to enable force
-	  feedback for it. Microsoft Sidewinder Force Feedback 2 is one of such
-	  devices.
-
-config LOGITECH_FF
-	bool "Logitech devices support"
-	depends on HID_FF
-	select INPUT_FF_MEMLESS if USB_HID
-	help
-	  Say Y here if you have one of these devices:
-	  - Logitech WingMan Cordless RumblePad
-	  - Logitech WingMan Cordless RumblePad 2
-	  - Logitech WingMan Force 3D
-	  - Logitech Formula Force EX
-	  - Logitech MOMO Force wheel
-
-	  and if you want to enable force feedback for them.
-	  Note: if you say N here, this device will still be supported, but without
-	  force feedback.
-
-config PANTHERLORD_FF
-	bool "PantherLord USB/PS2 2in1 Adapter support"
-	depends on HID_FF
-	select INPUT_FF_MEMLESS if USB_HID
-	help
-	  Say Y here if you have a PantherLord USB/PS2 2in1 Adapter and want
-	  to enable force feedback support for it.
-
-config THRUSTMASTER_FF
-	bool "ThrustMaster FireStorm Dual Power 2 support (EXPERIMENTAL)"
-	depends on HID_FF && EXPERIMENTAL
-	select INPUT_FF_MEMLESS if USB_HID
-	help
-	  Say Y here if you have a THRUSTMASTER FireStore Dual Power 2,
-	  and want to enable force feedback support for it.
-	  Note: if you say N here, this device will still be supported, but without
-	  force feedback.
-
-config ZEROPLUS_FF
-	bool "Zeroplus based game controller support"
-	depends on HID_FF
-	select INPUT_FF_MEMLESS if USB_HID
-	help
-	  Say Y here if you have a Zeroplus based game controller and want to
-	  enable force feedback for it.
-
-config USB_HIDDEV
-	bool "/dev/hiddev raw HID device support"
-	depends on USB_HID
-	help
-	  Say Y here if you want to support HID devices (from the USB
-	  specification standpoint) that aren't strictly user interface
-	  devices, like monitor controls and Uninterruptable Power Supplies.
-
-	  This module supports these devices separately using a separate
-	  event interface on /dev/usb/hiddevX (char 180:96 to 180:111).
-
-	  If unsure, say Y.
-
-menu "USB HID Boot Protocol drivers"
-	depends on USB!=n && USB_HID!=y
-
-config USB_KBD
-	tristate "USB HIDBP Keyboard (simple Boot) support"
-	depends on USB && INPUT
-	---help---
-	  Say Y here only if you are absolutely sure that you don't want
-	  to use the generic HID driver for your USB keyboard and prefer
-	  to use the keyboard in its limited Boot Protocol mode instead.
-
-	  This is almost certainly not what you want.  This is mostly
-	  useful for embedded applications or simple keyboards.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called usbkbd.
-
-	  If even remotely unsure, say N.
-
-config USB_MOUSE
-	tristate "USB HIDBP Mouse (simple Boot) support"
-	depends on USB && INPUT
-	---help---
-	  Say Y here only if you are absolutely sure that you don't want
-	  to use the generic HID driver for your USB mouse and prefer
-	  to use the mouse in its limited Boot Protocol mode instead.
-
-	  This is almost certainly not what you want.  This is mostly
-	  useful for embedded applications or simple mice.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called usbmouse.
-
-	  If even remotely unsure, say N.
-
-endmenu
-
 config USB_AIPTEK
 	tristate "Aiptek 6000U/8000U tablet support"
 	depends on USB && INPUT
diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile
index a9d206c945e..9bf420eef77 100644
--- a/drivers/usb/input/Makefile
+++ b/drivers/usb/input/Makefile
@@ -4,40 +4,12 @@
 
 # Multipart objects.
 wacom-objs	:= wacom_wac.o wacom_sys.o
-usbhid-objs	:= hid-core.o
-
-# Optional parts of multipart objects.
-
-ifeq ($(CONFIG_USB_HIDDEV),y)
-	usbhid-objs	+= hiddev.o
-endif
-ifeq ($(CONFIG_HID_PID),y)
-	usbhid-objs	+= hid-pidff.o
-endif
-ifeq ($(CONFIG_LOGITECH_FF),y)
-	usbhid-objs	+= hid-lgff.o
-endif
-ifeq ($(CONFIG_PANTHERLORD_FF),y)
-	usbhid-objs	+= hid-plff.o
-endif
-ifeq ($(CONFIG_THRUSTMASTER_FF),y)
-	usbhid-objs	+= hid-tmff.o
-endif
-ifeq ($(CONFIG_ZEROPLUS_FF),y)
-	usbhid-objs	+= hid-zpff.o
-endif
-ifeq ($(CONFIG_HID_FF),y)
-	usbhid-objs	+= hid-ff.o
-endif
 
 obj-$(CONFIG_USB_AIPTEK)	+= aiptek.o
 obj-$(CONFIG_USB_ATI_REMOTE)	+= ati_remote.o
 obj-$(CONFIG_USB_ATI_REMOTE2)	+= ati_remote2.o
-obj-$(CONFIG_USB_HID)		+= usbhid.o
-obj-$(CONFIG_USB_KBD)		+= usbkbd.o
 obj-$(CONFIG_USB_KBTAB)		+= kbtab.o
 obj-$(CONFIG_USB_KEYSPAN_REMOTE)	+= keyspan_remote.o
-obj-$(CONFIG_USB_MOUSE)		+= usbmouse.o
 obj-$(CONFIG_USB_MTOUCH)	+= mtouchusb.o
 obj-$(CONFIG_USB_ITMTOUCH)	+= itmtouch.o
 obj-$(CONFIG_USB_EGALAX)	+= touchkitusb.o
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
deleted file mode 100644
index 827a75a186b..00000000000
--- a/drivers/usb/input/hid-core.c
+++ /dev/null
@@ -1,1477 +0,0 @@
-/*
- *  USB HID support for Linux
- *
- *  Copyright (c) 1999 Andreas Gal
- *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
- *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
- *  Copyright (c) 2006-2007 Jiri Kosina
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/mm.h>
-#include <linux/smp_lock.h>
-#include <linux/spinlock.h>
-#include <asm/unaligned.h>
-#include <asm/byteorder.h>
-#include <linux/input.h>
-#include <linux/wait.h>
-
-#include <linux/usb.h>
-
-#include <linux/hid.h>
-#include <linux/hiddev.h>
-#include <linux/hid-debug.h>
-#include "usbhid.h"
-
-/*
- * Version Information
- */
-
-#define DRIVER_VERSION "v2.6"
-#define DRIVER_AUTHOR "Andreas Gal, Vojtech Pavlik"
-#define DRIVER_DESC "USB HID core driver"
-#define DRIVER_LICENSE "GPL"
-
-static char *hid_types[] = {"Device", "Pointer", "Mouse", "Device", "Joystick",
-				"Gamepad", "Keyboard", "Keypad", "Multi-Axis Controller"};
-/*
- * Module parameters.
- */
-
-static unsigned int hid_mousepoll_interval;
-module_param_named(mousepoll, hid_mousepoll_interval, uint, 0644);
-MODULE_PARM_DESC(mousepoll, "Polling interval of mice");
-
-/*
- * Input submission and I/O error handler.
- */
-
-static void hid_io_error(struct hid_device *hid);
-
-/* Start up the input URB */
-static int hid_start_in(struct hid_device *hid)
-{
-	unsigned long flags;
-	int rc = 0;
-	struct usbhid_device *usbhid = hid->driver_data;
-
-	spin_lock_irqsave(&usbhid->inlock, flags);
-	if (hid->open > 0 && !test_bit(HID_SUSPENDED, &usbhid->iofl) &&
-			!test_and_set_bit(HID_IN_RUNNING, &usbhid->iofl)) {
-		rc = usb_submit_urb(usbhid->urbin, GFP_ATOMIC);
-		if (rc != 0)
-			clear_bit(HID_IN_RUNNING, &usbhid->iofl);
-	}
-	spin_unlock_irqrestore(&usbhid->inlock, flags);
-	return rc;
-}
-
-/* I/O retry timer routine */
-static void hid_retry_timeout(unsigned long _hid)
-{
-	struct hid_device *hid = (struct hid_device *) _hid;
-	struct usbhid_device *usbhid = hid->driver_data;
-
-	dev_dbg(&usbhid->intf->dev, "retrying intr urb\n");
-	if (hid_start_in(hid))
-		hid_io_error(hid);
-}
-
-/* Workqueue routine to reset the device or clear a halt */
-static void hid_reset(struct work_struct *work)
-{
-	struct usbhid_device *usbhid =
-		container_of(work, struct usbhid_device, reset_work);
-	struct hid_device *hid = usbhid->hid;
-	int rc_lock, rc = 0;
-
-	if (test_bit(HID_CLEAR_HALT, &usbhid->iofl)) {
-		dev_dbg(&usbhid->intf->dev, "clear halt\n");
-		rc = usb_clear_halt(hid_to_usb_dev(hid), usbhid->urbin->pipe);
-		clear_bit(HID_CLEAR_HALT, &usbhid->iofl);
-		hid_start_in(hid);
-	}
-
-	else if (test_bit(HID_RESET_PENDING, &usbhid->iofl)) {
-		dev_dbg(&usbhid->intf->dev, "resetting device\n");
-		rc = rc_lock = usb_lock_device_for_reset(hid_to_usb_dev(hid), usbhid->intf);
-		if (rc_lock >= 0) {
-			rc = usb_reset_composite_device(hid_to_usb_dev(hid), usbhid->intf);
-			if (rc_lock)
-				usb_unlock_device(hid_to_usb_dev(hid));
-		}
-		clear_bit(HID_RESET_PENDING, &usbhid->iofl);
-	}
-
-	switch (rc) {
-	case 0:
-		if (!test_bit(HID_IN_RUNNING, &usbhid->iofl))
-			hid_io_error(hid);
-		break;
-	default:
-		err("can't reset device, %s-%s/input%d, status %d",
-				hid_to_usb_dev(hid)->bus->bus_name,
-				hid_to_usb_dev(hid)->devpath,
-				usbhid->ifnum, rc);
-		/* FALLTHROUGH */
-	case -EHOSTUNREACH:
-	case -ENODEV:
-	case -EINTR:
-		break;
-	}
-}
-
-/* Main I/O error handler */
-static void hid_io_error(struct hid_device *hid)
-{
-	unsigned long flags;
-	struct usbhid_device *usbhid = hid->driver_data;
-
-	spin_lock_irqsave(&usbhid->inlock, flags);
-
-	/* Stop when disconnected */
-	if (usb_get_intfdata(usbhid->intf) == NULL)
-		goto done;
-
-	/* When an error occurs, retry at increasing intervals */
-	if (usbhid->retry_delay == 0) {
-		usbhid->retry_delay = 13;	/* Then 26, 52, 104, 104, ... */
-		usbhid->stop_retry = jiffies + msecs_to_jiffies(1000);
-	} else if (usbhid->retry_delay < 100)
-		usbhid->retry_delay *= 2;
-
-	if (time_after(jiffies, usbhid->stop_retry)) {
-
-		/* Retries failed, so do a port reset */
-		if (!test_and_set_bit(HID_RESET_PENDING, &usbhid->iofl)) {
-			schedule_work(&usbhid->reset_work);
-			goto done;
-		}
-	}
-
-	mod_timer(&usbhid->io_retry,
-			jiffies + msecs_to_jiffies(usbhid->retry_delay));
-done:
-	spin_unlock_irqrestore(&usbhid->inlock, flags);
-}
-
-/*
- * Input interrupt completion handler.
- */
-
-static void hid_irq_in(struct urb *urb)
-{
-	struct hid_device	*hid = urb->context;
-	struct usbhid_device 	*usbhid = hid->driver_data;
-	int			status;
-
-	switch (urb->status) {
-		case 0:			/* success */
-			usbhid->retry_delay = 0;
-			hid_input_report(urb->context, HID_INPUT_REPORT,
-					 urb->transfer_buffer,
-					 urb->actual_length, 1);
-			break;
-		case -EPIPE:		/* stall */
-			clear_bit(HID_IN_RUNNING, &usbhid->iofl);
-			set_bit(HID_CLEAR_HALT, &usbhid->iofl);
-			schedule_work(&usbhid->reset_work);
-			return;
-		case -ECONNRESET:	/* unlink */
-		case -ENOENT:
-		case -ESHUTDOWN:	/* unplug */
-			clear_bit(HID_IN_RUNNING, &usbhid->iofl);
-			return;
-		case -EILSEQ:		/* protocol error or unplug */
-		case -EPROTO:		/* protocol error or unplug */
-		case -ETIME:		/* protocol error or unplug */
-		case -ETIMEDOUT:	/* Should never happen, but... */
-			clear_bit(HID_IN_RUNNING, &usbhid->iofl);
-			hid_io_error(hid);
-			return;
-		default:		/* error */
-			warn("input irq status %d received", urb->status);
-	}
-
-	status = usb_submit_urb(urb, GFP_ATOMIC);
-	if (status) {
-		clear_bit(HID_IN_RUNNING, &usbhid->iofl);
-		if (status != -EPERM) {
-			err("can't resubmit intr, %s-%s/input%d, status %d",
-					hid_to_usb_dev(hid)->bus->bus_name,
-					hid_to_usb_dev(hid)->devpath,
-					usbhid->ifnum, status);
-			hid_io_error(hid);
-		}
-	}
-}
-
-static int hid_submit_out(struct hid_device *hid)
-{
-	struct hid_report *report;
-	struct usbhid_device *usbhid = hid->driver_data;
-
-	report = usbhid->out[usbhid->outtail];
-
-	hid_output_report(report, usbhid->outbuf);
-	usbhid->urbout->transfer_buffer_length = ((report->size - 1) >> 3) + 1 + (report->id > 0);
-	usbhid->urbout->dev = hid_to_usb_dev(hid);
-
-	dbg("submitting out urb");
-
-	if (usb_submit_urb(usbhid->urbout, GFP_ATOMIC)) {
-		err("usb_submit_urb(out) failed");
-		return -1;
-	}
-
-	return 0;
-}
-
-static int hid_submit_ctrl(struct hid_device *hid)
-{
-	struct hid_report *report;
-	unsigned char dir;
-	int len;
-	struct usbhid_device *usbhid = hid->driver_data;
-
-	report = usbhid->ctrl[usbhid->ctrltail].report;
-	dir = usbhid->ctrl[usbhid->ctrltail].dir;
-
-	len = ((report->size - 1) >> 3) + 1 + (report->id > 0);
-	if (dir == USB_DIR_OUT) {
-		hid_output_report(report, usbhid->ctrlbuf);
-		usbhid->urbctrl->pipe = usb_sndctrlpipe(hid_to_usb_dev(hid), 0);
-		usbhid->urbctrl->transfer_buffer_length = len;
-	} else {
-		int maxpacket, padlen;
-
-		usbhid->urbctrl->pipe = usb_rcvctrlpipe(hid_to_usb_dev(hid), 0);
-		maxpacket = usb_maxpacket(hid_to_usb_dev(hid), usbhid->urbctrl->pipe, 0);
-		if (maxpacket > 0) {
-			padlen = (len + maxpacket - 1) / maxpacket;
-			padlen *= maxpacket;
-			if (padlen > usbhid->bufsize)
-				padlen = usbhid->bufsize;
-		} else
-			padlen = 0;
-		usbhid->urbctrl->transfer_buffer_length = padlen;
-	}
-	usbhid->urbctrl->dev = hid_to_usb_dev(hid);
-
-	usbhid->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | dir;
-	usbhid->cr->bRequest = (dir == USB_DIR_OUT) ? HID_REQ_SET_REPORT : HID_REQ_GET_REPORT;
-	usbhid->cr->wValue = cpu_to_le16(((report->type + 1) << 8) | report->id);
-	usbhid->cr->wIndex = cpu_to_le16(usbhid->ifnum);
-	usbhid->cr->wLength = cpu_to_le16(len);
-
-	dbg("submitting ctrl urb: %s wValue=0x%04x wIndex=0x%04x wLength=%u",
-		usbhid->cr->bRequest == HID_REQ_SET_REPORT ? "Set_Report" : "Get_Report",
-		usbhid->cr->wValue, usbhid->cr->wIndex, usbhid->cr->wLength);
-
-	if (usb_submit_urb(usbhid->urbctrl, GFP_ATOMIC)) {
-		err("usb_submit_urb(ctrl) failed");
-		return -1;
-	}
-
-	return 0;
-}
-
-/*
- * Output interrupt completion handler.
- */
-
-static void hid_irq_out(struct urb *urb)
-{
-	struct hid_device *hid = urb->context;
-	struct usbhid_device *usbhid = hid->driver_data;
-	unsigned long flags;
-	int unplug = 0;
-
-	switch (urb->status) {
-		case 0:			/* success */
-			break;
-		case -ESHUTDOWN:	/* unplug */
-			unplug = 1;
-		case -EILSEQ:		/* protocol error or unplug */
-		case -EPROTO:		/* protocol error or unplug */
-		case -ECONNRESET:	/* unlink */
-		case -ENOENT:
-			break;
-		default:		/* error */
-			warn("output irq status %d received", urb->status);
-	}
-
-	spin_lock_irqsave(&usbhid->outlock, flags);
-
-	if (unplug)
-		usbhid->outtail = usbhid->outhead;
-	else
-		usbhid->outtail = (usbhid->outtail + 1) & (HID_OUTPUT_FIFO_SIZE - 1);
-
-	if (usbhid->outhead != usbhid->outtail) {
-		if (hid_submit_out(hid)) {
-			clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
-			wake_up(&hid->wait);
-		}
-		spin_unlock_irqrestore(&usbhid->outlock, flags);
-		return;
-	}
-
-	clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
-	spin_unlock_irqrestore(&usbhid->outlock, flags);
-	wake_up(&hid->wait);
-}
-
-/*
- * Control pipe completion handler.
- */
-
-static void hid_ctrl(struct urb *urb)
-{
-	struct hid_device *hid = urb->context;
-	struct usbhid_device *usbhid = hid->driver_data;
-	unsigned long flags;
-	int unplug = 0;
-
-	spin_lock_irqsave(&usbhid->ctrllock, flags);
-
-	switch (urb->status) {
-		case 0:			/* success */
-			if (usbhid->ctrl[usbhid->ctrltail].dir == USB_DIR_IN)
-				hid_input_report(urb->context, usbhid->ctrl[usbhid->ctrltail].report->type,
-						urb->transfer_buffer, urb->actual_length, 0);
-			break;
-		case -ESHUTDOWN:	/* unplug */
-			unplug = 1;
-		case -EILSEQ:		/* protocol error or unplug */
-		case -EPROTO:		/* protocol error or unplug */
-		case -ECONNRESET:	/* unlink */
-		case -ENOENT:
-		case -EPIPE:		/* report not available */
-			break;
-		default:		/* error */
-			warn("ctrl urb status %d received", urb->status);
-	}
-
-	if (unplug)
-		usbhid->ctrltail = usbhid->ctrlhead;
-	else
-		usbhid->ctrltail = (usbhid->ctrltail + 1) & (HID_CONTROL_FIFO_SIZE - 1);
-
-	if (usbhid->ctrlhead != usbhid->ctrltail) {
-		if (hid_submit_ctrl(hid)) {
-			clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
-			wake_up(&hid->wait);
-		}
-		spin_unlock_irqrestore(&usbhid->ctrllock, flags);
-		return;
-	}
-
-	clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
-	spin_unlock_irqrestore(&usbhid->ctrllock, flags);
-	wake_up(&hid->wait);
-}
-
-void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir)
-{
-	int head;
-	unsigned long flags;
-	struct usbhid_device *usbhid = hid->driver_data;
-
-	if ((hid->quirks & HID_QUIRK_NOGET) && dir == USB_DIR_IN)
-		return;
-
-	if (usbhid->urbout && dir == USB_DIR_OUT && report->type == HID_OUTPUT_REPORT) {
-
-		spin_lock_irqsave(&usbhid->outlock, flags);
-
-		if ((head = (usbhid->outhead + 1) & (HID_OUTPUT_FIFO_SIZE - 1)) == usbhid->outtail) {
-			spin_unlock_irqrestore(&usbhid->outlock, flags);
-			warn("output queue full");
-			return;
-		}
-
-		usbhid->out[usbhid->outhead] = report;
-		usbhid->outhead = head;
-
-		if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl))
-			if (hid_submit_out(hid))
-				clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
-
-		spin_unlock_irqrestore(&usbhid->outlock, flags);
-		return;
-	}
-
-	spin_lock_irqsave(&usbhid->ctrllock, flags);
-
-	if ((head = (usbhid->ctrlhead + 1) & (HID_CONTROL_FIFO_SIZE - 1)) == usbhid->ctrltail) {
-		spin_unlock_irqrestore(&usbhid->ctrllock, flags);
-		warn("control queue full");
-		return;
-	}
-
-	usbhid->ctrl[usbhid->ctrlhead].report = report;
-	usbhid->ctrl[usbhid->ctrlhead].dir = dir;
-	usbhid->ctrlhead = head;
-
-	if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl))
-		if (hid_submit_ctrl(hid))
-			clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
-
-	spin_unlock_irqrestore(&usbhid->ctrllock, flags);
-}
-
-static int usb_hidinput_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
-{
-	struct hid_device *hid = dev->private;
-	struct hid_field *field;
-	int offset;
-
-	if (type == EV_FF)
-		return input_ff_event(dev, type, code, value);
-
-	if (type != EV_LED)
-		return -1;
-
-	if ((offset = hidinput_find_field(hid, type, code, &field)) == -1) {
-		warn("event field not found");
-		return -1;
-	}
-
-	hid_set_field(field, offset, value);
-	usbhid_submit_report(hid, field->report, USB_DIR_OUT);
-
-	return 0;
-}
-
-int usbhid_wait_io(struct hid_device *hid)
-{
-	struct usbhid_device *usbhid = hid->driver_data;
-
-	if (!wait_event_timeout(hid->wait, (!test_bit(HID_CTRL_RUNNING, &usbhid->iofl) &&
-					!test_bit(HID_OUT_RUNNING, &usbhid->iofl)),
-					10*HZ)) {
-		dbg("timeout waiting for ctrl or out queue to clear");
-		return -1;
-	}
-
-	return 0;
-}
-
-static int hid_set_idle(struct usb_device *dev, int ifnum, int report, int idle)
-{
-	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-		HID_REQ_SET_IDLE, USB_TYPE_CLASS | USB_RECIP_INTERFACE, (idle << 8) | report,
-		ifnum, NULL, 0, USB_CTRL_SET_TIMEOUT);
-}
-
-static int hid_get_class_descriptor(struct usb_device *dev, int ifnum,
-		unsigned char type, void *buf, int size)
-{
-	int result, retries = 4;
-
-	memset(buf, 0, size);
-
-	do {
-		result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-				USB_REQ_GET_DESCRIPTOR, USB_RECIP_INTERFACE | USB_DIR_IN,
-				(type << 8), ifnum, buf, size, USB_CTRL_GET_TIMEOUT);
-		retries--;
-	} while (result < size && retries);
-	return result;
-}
-
-int usbhid_open(struct hid_device *hid)
-{
-	++hid->open;
-	if (hid_start_in(hid))
-		hid_io_error(hid);
-	return 0;
-}
-
-void usbhid_close(struct hid_device *hid)
-{
-	struct usbhid_device *usbhid = hid->driver_data;
-
-	if (!--hid->open)
-		usb_kill_urb(usbhid->urbin);
-}
-
-#define USB_VENDOR_ID_PANJIT		0x134c
-
-#define USB_VENDOR_ID_TURBOX		0x062a
-#define USB_DEVICE_ID_TURBOX_KEYBOARD	0x0201
-#define USB_VENDOR_ID_CIDC		0x1677
-
-/*
- * Initialize all reports
- */
-
-void usbhid_init_reports(struct hid_device *hid)
-{
-	struct hid_report *report;
-	struct usbhid_device *usbhid = hid->driver_data;
-	int err, ret;
-
-	list_for_each_entry(report, &hid->report_enum[HID_INPUT_REPORT].report_list, list)
-		usbhid_submit_report(hid, report, USB_DIR_IN);
-
-	list_for_each_entry(report, &hid->report_enum[HID_FEATURE_REPORT].report_list, list)
-		usbhid_submit_report(hid, report, USB_DIR_IN);
-
-	err = 0;
-	ret = usbhid_wait_io(hid);
-	while (ret) {
-		err |= ret;
-		if (test_bit(HID_CTRL_RUNNING, &usbhid->iofl))
-			usb_kill_urb(usbhid->urbctrl);
-		if (test_bit(HID_OUT_RUNNING, &usbhid->iofl))
-			usb_kill_urb(usbhid->urbout);
-		ret = usbhid_wait_io(hid);
-	}
-
-	if (err)
-		warn("timeout initializing reports");
-}
-
-#define USB_VENDOR_ID_GTCO		0x078c
-#define USB_DEVICE_ID_GTCO_90		0x0090
-#define USB_DEVICE_ID_GTCO_100		0x0100
-#define USB_DEVICE_ID_GTCO_101		0x0101
-#define USB_DEVICE_ID_GTCO_103		0x0103
-#define USB_DEVICE_ID_GTCO_104		0x0104
-#define USB_DEVICE_ID_GTCO_105		0x0105
-#define USB_DEVICE_ID_GTCO_106		0x0106
-#define USB_DEVICE_ID_GTCO_107		0x0107
-#define USB_DEVICE_ID_GTCO_108		0x0108
-#define USB_DEVICE_ID_GTCO_200		0x0200
-#define USB_DEVICE_ID_GTCO_201		0x0201
-#define USB_DEVICE_ID_GTCO_202		0x0202
-#define USB_DEVICE_ID_GTCO_203		0x0203
-#define USB_DEVICE_ID_GTCO_204		0x0204
-#define USB_DEVICE_ID_GTCO_205		0x0205
-#define USB_DEVICE_ID_GTCO_206		0x0206
-#define USB_DEVICE_ID_GTCO_207		0x0207
-#define USB_DEVICE_ID_GTCO_300		0x0300
-#define USB_DEVICE_ID_GTCO_301		0x0301
-#define USB_DEVICE_ID_GTCO_302		0x0302
-#define USB_DEVICE_ID_GTCO_303		0x0303
-#define USB_DEVICE_ID_GTCO_304		0x0304
-#define USB_DEVICE_ID_GTCO_305		0x0305
-#define USB_DEVICE_ID_GTCO_306		0x0306
-#define USB_DEVICE_ID_GTCO_307		0x0307
-#define USB_DEVICE_ID_GTCO_308		0x0308
-#define USB_DEVICE_ID_GTCO_309		0x0309
-#define USB_DEVICE_ID_GTCO_400		0x0400
-#define USB_DEVICE_ID_GTCO_401		0x0401
-#define USB_DEVICE_ID_GTCO_402		0x0402
-#define USB_DEVICE_ID_GTCO_403		0x0403
-#define USB_DEVICE_ID_GTCO_404		0x0404
-#define USB_DEVICE_ID_GTCO_405		0x0405
-#define USB_DEVICE_ID_GTCO_500		0x0500
-#define USB_DEVICE_ID_GTCO_501		0x0501
-#define USB_DEVICE_ID_GTCO_502		0x0502
-#define USB_DEVICE_ID_GTCO_503		0x0503
-#define USB_DEVICE_ID_GTCO_504		0x0504
-#define USB_DEVICE_ID_GTCO_1000		0x1000
-#define USB_DEVICE_ID_GTCO_1001		0x1001
-#define USB_DEVICE_ID_GTCO_1002		0x1002
-#define USB_DEVICE_ID_GTCO_1003		0x1003
-#define USB_DEVICE_ID_GTCO_1004		0x1004
-#define USB_DEVICE_ID_GTCO_1005		0x1005
-#define USB_DEVICE_ID_GTCO_1006		0x1006
-
-#define USB_VENDOR_ID_WACOM		0x056a
-
-#define USB_VENDOR_ID_ACECAD		0x0460
-#define USB_DEVICE_ID_ACECAD_FLAIR	0x0004
-#define USB_DEVICE_ID_ACECAD_302	0x0008
-
-#define USB_VENDOR_ID_KBGEAR		0x084e
-#define USB_DEVICE_ID_KBGEAR_JAMSTUDIO	0x1001
-
-#define USB_VENDOR_ID_AIPTEK		0x08ca
-#define USB_DEVICE_ID_AIPTEK_01		0x0001
-#define USB_DEVICE_ID_AIPTEK_10		0x0010
-#define USB_DEVICE_ID_AIPTEK_20		0x0020
-#define USB_DEVICE_ID_AIPTEK_21		0x0021
-#define USB_DEVICE_ID_AIPTEK_22		0x0022
-#define USB_DEVICE_ID_AIPTEK_23		0x0023
-#define USB_DEVICE_ID_AIPTEK_24		0x0024
-
-#define USB_VENDOR_ID_GRIFFIN		0x077d
-#define USB_DEVICE_ID_POWERMATE		0x0410
-#define USB_DEVICE_ID_SOUNDKNOB		0x04AA
-
-#define USB_VENDOR_ID_ATEN		0x0557
-#define USB_DEVICE_ID_ATEN_UC100KM	0x2004
-#define USB_DEVICE_ID_ATEN_CS124U	0x2202
-#define USB_DEVICE_ID_ATEN_2PORTKVM	0x2204
-#define USB_DEVICE_ID_ATEN_4PORTKVM	0x2205
-#define USB_DEVICE_ID_ATEN_4PORTKVMC	0x2208
-
-#define USB_VENDOR_ID_TOPMAX		0x0663
-#define USB_DEVICE_ID_TOPMAX_COBRAPAD	0x0103
-
-#define USB_VENDOR_ID_HAPP		0x078b
-#define USB_DEVICE_ID_UGCI_DRIVING	0x0010
-#define USB_DEVICE_ID_UGCI_FLYING	0x0020
-#define USB_DEVICE_ID_UGCI_FIGHTING	0x0030
-
-#define USB_VENDOR_ID_MGE		0x0463
-#define USB_DEVICE_ID_MGE_UPS		0xffff
-#define USB_DEVICE_ID_MGE_UPS1		0x0001
-
-#define USB_VENDOR_ID_ONTRAK		0x0a07
-#define USB_DEVICE_ID_ONTRAK_ADU100	0x0064
-
-#define USB_VENDOR_ID_ESSENTIAL_REALITY	0x0d7f
-#define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
-
-#define USB_VENDOR_ID_A4TECH		0x09da
-#define USB_DEVICE_ID_A4TECH_WCP32PU	0x0006
-
-#define USB_VENDOR_ID_AASHIMA		0x06d6
-#define USB_DEVICE_ID_AASHIMA_GAMEPAD	0x0025
-#define USB_DEVICE_ID_AASHIMA_PREDATOR	0x0026
-
-#define USB_VENDOR_ID_CYPRESS		0x04b4
-#define USB_DEVICE_ID_CYPRESS_MOUSE	0x0001
-#define USB_DEVICE_ID_CYPRESS_HIDCOM	0x5500
-#define USB_DEVICE_ID_CYPRESS_ULTRAMOUSE	0x7417
-
-#define USB_VENDOR_ID_BERKSHIRE		0x0c98
-#define USB_DEVICE_ID_BERKSHIRE_PCWD	0x1140
-
-#define USB_VENDOR_ID_ALPS		0x0433
-#define USB_DEVICE_ID_IBM_GAMEPAD	0x1101
-
-#define USB_VENDOR_ID_SAITEK		0x06a3
-#define USB_DEVICE_ID_SAITEK_RUMBLEPAD	0xff17
-
-#define USB_VENDOR_ID_NEC		0x073e
-#define USB_DEVICE_ID_NEC_USB_GAME_PAD	0x0301
-
-#define USB_VENDOR_ID_CHIC		0x05fe
-#define USB_DEVICE_ID_CHIC_GAMEPAD	0x0014
-
-#define USB_VENDOR_ID_GLAB		0x06c2
-#define USB_DEVICE_ID_4_PHIDGETSERVO_30	0x0038
-#define USB_DEVICE_ID_1_PHIDGETSERVO_30	0x0039
-#define USB_DEVICE_ID_0_0_4_IF_KIT	0x0040
-#define USB_DEVICE_ID_0_16_16_IF_KIT	0x0044
-#define USB_DEVICE_ID_8_8_8_IF_KIT	0x0045
-#define USB_DEVICE_ID_0_8_7_IF_KIT	0x0051
-#define USB_DEVICE_ID_0_8_8_IF_KIT	0x0053
-#define USB_DEVICE_ID_PHIDGET_MOTORCONTROL	0x0058
-
-#define USB_VENDOR_ID_WISEGROUP		0x0925
-#define USB_DEVICE_ID_1_PHIDGETSERVO_20	0x8101
-#define USB_DEVICE_ID_4_PHIDGETSERVO_20	0x8104
-#define USB_DEVICE_ID_8_8_4_IF_KIT	0x8201
-#define USB_DEVICE_ID_DUAL_USB_JOYPAD   0x8866
-
-#define USB_VENDOR_ID_WISEGROUP_LTD	0x6677
-#define USB_DEVICE_ID_SMARTJOY_DUAL_PLUS 0x8802
-
-#define USB_VENDOR_ID_CODEMERCS		0x07c0
-#define USB_DEVICE_ID_CODEMERCS_IOW_FIRST	0x1500
-#define USB_DEVICE_ID_CODEMERCS_IOW_LAST	0x15ff
-
-#define USB_VENDOR_ID_DELORME		0x1163
-#define USB_DEVICE_ID_DELORME_EARTHMATE 0x0100
-#define USB_DEVICE_ID_DELORME_EM_LT20	0x0200
-
-#define USB_VENDOR_ID_MCC		0x09db
-#define USB_DEVICE_ID_MCC_PMD1024LS	0x0076
-#define USB_DEVICE_ID_MCC_PMD1208LS	0x007a
-
-#define USB_VENDOR_ID_VERNIER		0x08f7
-#define USB_DEVICE_ID_VERNIER_LABPRO	0x0001
-#define USB_DEVICE_ID_VERNIER_GOTEMP	0x0002
-#define USB_DEVICE_ID_VERNIER_SKIP	0x0003
-#define USB_DEVICE_ID_VERNIER_CYCLOPS	0x0004
-
-#define USB_VENDOR_ID_LD		0x0f11
-#define USB_DEVICE_ID_LD_CASSY		0x1000
-#define USB_DEVICE_ID_LD_POCKETCASSY	0x1010
-#define USB_DEVICE_ID_LD_MOBILECASSY	0x1020
-#define USB_DEVICE_ID_LD_JWM		0x1080
-#define USB_DEVICE_ID_LD_DMMP		0x1081
-#define USB_DEVICE_ID_LD_UMIP		0x1090
-#define USB_DEVICE_ID_LD_XRAY1		0x1100
-#define USB_DEVICE_ID_LD_XRAY2		0x1101
-#define USB_DEVICE_ID_LD_VIDEOCOM	0x1200
-#define USB_DEVICE_ID_LD_COM3LAB	0x2000
-#define USB_DEVICE_ID_LD_TELEPORT	0x2010
-#define USB_DEVICE_ID_LD_NETWORKANALYSER 0x2020
-#define USB_DEVICE_ID_LD_POWERCONTROL	0x2030
-#define USB_DEVICE_ID_LD_MACHINETEST	0x2040
-
-#define USB_VENDOR_ID_APPLE		0x05ac
-#define USB_DEVICE_ID_APPLE_MIGHTYMOUSE	0x0304
-#define USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI	0x020e
-#define USB_DEVICE_ID_APPLE_FOUNTAIN_ISO	0x020f
-#define USB_DEVICE_ID_APPLE_GEYSER_ANSI	0x0214
-#define USB_DEVICE_ID_APPLE_GEYSER_ISO	0x0215
-#define USB_DEVICE_ID_APPLE_GEYSER_JIS	0x0216
-#define USB_DEVICE_ID_APPLE_GEYSER3_ANSI	0x0217
-#define USB_DEVICE_ID_APPLE_GEYSER3_ISO	0x0218
-#define USB_DEVICE_ID_APPLE_GEYSER3_JIS	0x0219
-#define USB_DEVICE_ID_APPLE_GEYSER4_ANSI	0x021a
-#define USB_DEVICE_ID_APPLE_GEYSER4_ISO	0x021b
-#define USB_DEVICE_ID_APPLE_GEYSER4_JIS	0x021c
-#define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY	0x030a
-#define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY	0x030b
-#define USB_DEVICE_ID_APPLE_IR		0x8240
-
-#define USB_VENDOR_ID_CHERRY		0x046a
-#define USB_DEVICE_ID_CHERRY_CYMOTION	0x0023
-
-#define USB_VENDOR_ID_YEALINK		0x6993
-#define USB_DEVICE_ID_YEALINK_P1K_P4K_B2K	0xb001
-