Merge 3.4-rc4 into usb-next.

This resolves the conflict in:
	drivers/usb/host/ehci-fsl.c
And picks up loads of xhci bugfixes to make it easier for others to test
with.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

49 files changed, 1607 insertions, 1227 deletions

diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 01ea5d7421d..d7e422dc0ef 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -1357,10 +1357,8 @@ static int uea_stat_e1(struct uea_softc *sc)
 		/* release the dsp firmware as it is not needed until
 		 * the next failure
 		 */
-		if (sc->dsp_firm) {
-			release_firmware(sc->dsp_firm);
-			sc->dsp_firm = NULL;
-		}
+		release_firmware(sc->dsp_firm);
+		sc->dsp_firm = NULL;
 	}
 
 	/* always update it as atm layer could not be init when we switch to
@@ -1496,10 +1494,8 @@ static int uea_stat_e4(struct uea_softc *sc)
 		/* release the dsp firmware as it is not needed until
 		 * the next failure
 		 */
-		if (sc->dsp_firm) {
-			release_firmware(sc->dsp_firm);
-			sc->dsp_firm = NULL;
-		}
+		release_firmware(sc->dsp_firm);
+		sc->dsp_firm = NULL;
 	}
 
 	/* always update it as atm layer could not be init when we switch to
@@ -2240,8 +2236,7 @@ static void uea_stop(struct uea_softc *sc)
 	/* flush the work item, when no one can schedule it */
 	flush_work_sync(&sc->task);
 
-	if (sc->dsp_firm)
-		release_firmware(sc->dsp_firm);
+	release_firmware(sc->dsp_firm);
 	uea_leaves(INS_TO_USBDEV(sc));
 }
 
diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c
index b2113420b80..3b3932c5536 100644
--- a/drivers/usb/gadget/f_hid.c
+++ b/drivers/usb/gadget/f_hid.c
@@ -374,7 +374,7 @@ static int hidg_setup(struct usb_function *f,
 			break;
 
 		default:
-			VDBG(cdev, "Unknown decriptor request 0x%x\n",
+			VDBG(cdev, "Unknown descriptor request 0x%x\n",
 				 value >> 8);
 			goto stall;
 			break;
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 55abfb6bd61..0d9b2fa45af 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2004-2007,2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007,2011-2012 Freescale Semiconductor, Inc.
  * All rights reserved.
  *
  * Author: Li Yang <leoli@freescale.com>
@@ -58,9 +58,8 @@ static const char driver_name[] = "fsl-usb2-udc";
 static const char driver_desc[] = DRIVER_DESC;
 
 static struct usb_dr_device *dr_regs;
-#ifndef CONFIG_ARCH_MXC
+
 static struct usb_sys_interface *usb_sys_regs;
-#endif
 
 /* it is initialized in probe()  */
 static struct fsl_udc *udc_controller = NULL;
@@ -244,10 +243,9 @@ static int dr_controller_setup(struct fsl_udc *udc)
 {
 	unsigned int tmp, portctrl, ep_num;
 	unsigned int max_no_of_ep;
-#ifndef CONFIG_ARCH_MXC
 	unsigned int ctrl;
-#endif
 	unsigned long timeout;
+
 #define FSL_UDC_RESET_TIMEOUT 1000
 
 	/* Config PHY interface */
@@ -255,12 +253,32 @@ static int dr_controller_setup(struct fsl_udc *udc)
 	portctrl &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PORT_WIDTH);
 	switch (udc->phy_mode) {
 	case FSL_USB2_PHY_ULPI:
+		if (udc->pdata->have_sysif_regs) {
+			if (udc->pdata->controller_ver) {
+				/* controller version 1.6 or above */
+				ctrl = __raw_readl(&usb_sys_regs->control);
+				ctrl &= ~USB_CTRL_UTMI_PHY_EN;
+				ctrl |= USB_CTRL_USB_EN;
+				__raw_writel(ctrl, &usb_sys_regs->control);
+			}
+		}
 		portctrl |= PORTSCX_PTS_ULPI;
 		break;
 	case FSL_USB2_PHY_UTMI_WIDE:
 		portctrl |= PORTSCX_PTW_16BIT;
 		/* fall through */
 	case FSL_USB2_PHY_UTMI:
+		if (udc->pdata->have_sysif_regs) {
+			if (udc->pdata->controller_ver) {
+				/* controller version 1.6 or above */
+				ctrl = __raw_readl(&usb_sys_regs->control);
+				ctrl |= (USB_CTRL_UTMI_PHY_EN |
+					USB_CTRL_USB_EN);
+				__raw_writel(ctrl, &usb_sys_regs->control);
+				mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI
+					PHY CLK to become stable - 10ms*/
+			}
+		}
 		portctrl |= PORTSCX_PTS_UTMI;
 		break;
 	case FSL_USB2_PHY_SERIAL:
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index e651469fd39..1212646841a 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -1,4 +1,12 @@
 /*
+ * Copyright (C) 2004,2012 Freescale Semiconductor, Inc
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
  * Freescale USB device/endpoint management registers
  */
 #ifndef __FSL_USB2_UDC_H
@@ -348,6 +356,9 @@ struct usb_sys_interface {
 /* control Register Bit Masks */
 #define  USB_CTRL_IOENB                       0x00000004
 #define  USB_CTRL_ULPI_INT0EN                 0x00000001
+#define USB_CTRL_UTMI_PHY_EN		      0x00000200
+#define USB_CTRL_USB_EN			      0x00000004
+#define USB_CTRL_ULPI_PHY_CLK_SEL	      0x00000400
 
 /* Endpoint Queue Head data struct
  * Rem: all the variables of qh are LittleEndian Mode
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index f788eb86707..896fc91c54a 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -110,13 +110,14 @@ config USB_EHCI_BIG_ENDIAN_MMIO
 	depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \
 				    ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
 				    PPC_MPC512x || CPU_CAVIUM_OCTEON || \
-				    PMC_MSP || SPARC_LEON)
+				    PMC_MSP || SPARC_LEON || MIPS_SEAD3)
 	default y
 
 config USB_EHCI_BIG_ENDIAN_DESC
 	bool
 	depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
-				    PPC_MPC512x || PMC_MSP || SPARC_LEON)
+				    PPC_MPC512x || PMC_MSP || SPARC_LEON || \
+				    MIPS_SEAD3)
 	default y
 
 config XPS_USB_HCD_XILINX
@@ -373,10 +374,15 @@ config USB_OHCI_HCD_PCI
 	  If unsure, say Y.
 
 config USB_OHCI_HCD_SSB
-	bool "OHCI support for Broadcom SSB OHCI core"
+	bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)"
 	depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL
+	select USB_HCD_SSB
+	select USB_OHCI_HCD_PLATFORM
 	default n
 	---help---
+	  This option is deprecated now and the driver was removed, use
+	  USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead.
+
 	  Support for the Sonics Silicon Backplane (SSB) attached
 	  Broadcom USB OHCI core.
 
@@ -638,3 +644,27 @@ config USB_OCTEON_OHCI
 config USB_OCTEON2_COMMON
 	bool
 	default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI
+
+config USB_HCD_BCMA
+	tristate "BCMA usb host driver"
+	depends on BCMA && EXPERIMENTAL
+	select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
+	select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
+	help
+	  Enbale support for the EHCI and OCHI host controller on an bcma bus.
+	  It converts the bcma driver into two platform device drivers
+	  for ehci and ohci.
+
+	  If unsure, say N.
+
+config USB_HCD_SSB
+	tristate "SSB usb host driver"
+	depends on SSB && EXPERIMENTAL
+	select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
+	select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
+	help
+	  Enbale support for the EHCI and OCHI host controller on an bcma bus.
+	  It converts the bcma driver into two platform device drivers
+	  for ehci and ohci.
+
+	  If unsure, say N.
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 0982bcc140b..9e0a89ced15 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -41,3 +41,5 @@ obj-$(CONFIG_USB_IMX21_HCD)	+= imx21-hcd.o
 obj-$(CONFIG_USB_FSL_MPH_DR_OF)	+= fsl-mph-dr-of.o
 obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
 obj-$(CONFIG_MIPS_ALCHEMY)	+= alchemy-common.o
+obj-$(CONFIG_USB_HCD_BCMA)	+= bcma-hcd.o
+obj-$(CONFIG_USB_HCD_SSB)	+= ssb-hcd.o
diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c
new file mode 100644
index 00000000000..0b35d422fa4
--- /dev/null
+++ b/drivers/usb/host/bcma-hcd.c
@@ -0,0 +1,334 @@
+/*
+ * Broadcom specific Advanced Microcontroller Bus
+ * Broadcom USB-core driver (BCMA bus glue)
+ *
+ * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Based on ssb-ohci driver
+ * Copyright 2007 Michael Buesch <m@bues.ch>
+ *
+ * Derived from the OHCI-PCI driver
+ * Copyright 1999 Roman Weissgaerber
+ * Copyright 2000-2002 David Brownell
+ * Copyright 1999 Linus Torvalds
+ * Copyright 1999 Gregory P. Smith
+ *
+ * Derived from the USBcore related parts of Broadcom-SB
+ * Copyright 2005-2011 Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+#include <linux/bcma/bcma.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+
+MODULE_AUTHOR("Hauke Mehrtens");
+MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
+MODULE_LICENSE("GPL");
+
+struct bcma_hcd_device {
+	struct platform_device *ehci_dev;
+	struct platform_device *ohci_dev;
+};
+
+/* Wait for bitmask in a register to get set or cleared.
+ * timeout is in units of ten-microseconds.
+ */
+static int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask,
+			  int timeout)
+{
+	int i;
+	u32 val;
+
+	for (i = 0; i < timeout; i++) {
+		val = bcma_read32(dev, reg);
+		if ((val & bitmask) == bitmask)
+			return 0;
+		udelay(10);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static void __devinit bcma_hcd_4716wa(struct bcma_device *dev)
+{
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+	/* Work around for 4716 failures. */
+	if (dev->bus->chipinfo.id == 0x4716) {
+		u32 tmp;
+
+		tmp = bcma_cpu_clock(&dev->bus->drv_mips);
+		if (tmp >= 480000000)
+			tmp = 0x1846b; /* set CDR to 0x11(fast) */
+		else if (tmp == 453000000)
+			tmp = 0x1046b; /* set CDR to 0x10(slow) */
+		else
+			tmp = 0;
+
+		/* Change Shim mdio control reg to fix host not acking at
+		 * high frequencies
+		 */
+		if (tmp) {
+			bcma_write32(dev, 0x524, 0x1); /* write sel to enable */
+			udelay(500);
+
+			bcma_write32(dev, 0x524, tmp);
+			udelay(500);
+			bcma_write32(dev, 0x524, 0x4ab);
+			udelay(500);
+			bcma_read32(dev, 0x528);
+			bcma_write32(dev, 0x528, 0x80000000);
+		}
+	}
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
+}
+
+/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
+static void __devinit bcma_hcd_init_chip(struct bcma_device *dev)
+{
+	u32 tmp;
+
+	/*
+	 * USB 2.0 special considerations:
+	 *
+	 * 1. Since the core supports both OHCI and EHCI functions, it must
+	 *    only be reset once.
+	 *
+	 * 2. In addition to the standard SI reset sequence, the Host Control
+	 *    Register must be programmed to bring the USB core and various
+	 *    phy components out of reset.
+	 */
+	if (!bcma_core_is_enabled(dev)) {
+		bcma_core_enable(dev, 0);
+		mdelay(10);
+		if (dev->id.rev >= 5) {
+			/* Enable Misc PLL */
+			tmp = bcma_read32(dev, 0x1e0);
+			tmp |= 0x100;
+			bcma_write32(dev, 0x1e0, tmp);
+			if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100))
+				printk(KERN_EMERG "Failed to enable misc PPL!\n");
+
+			/* Take out of resets */
+			bcma_write32(dev, 0x200, 0x4ff);
+			udelay(25);
+			bcma_write32(dev, 0x200, 0x6ff);
+			udelay(25);
+
+			/* Make sure digital and AFE are locked in USB PHY */
+			bcma_write32(dev, 0x524, 0x6b);
+			udelay(50);
+			tmp = bcma_read32(dev, 0x524);
+			udelay(50);
+			bcma_write32(dev, 0x524, 0xab);
+			udelay(50);
+			tmp = bcma_read32(dev, 0x524);
+			udelay(50);
+			bcma_write32(dev, 0x524, 0x2b);
+			udelay(50);
+			tmp = bcma_read32(dev, 0x524);
+			udelay(50);
+			bcma_write32(dev, 0x524, 0x10ab);
+			udelay(50);
+			tmp = bcma_read32(dev, 0x524);
+
+			if (bcma_wait_bits(dev, 0x528, 0xc000, 10000)) {
+				tmp = bcma_read32(dev, 0x528);
+				printk(KERN_EMERG
+				       "USB20H mdio_rddata 0x%08x\n", tmp);
+			}
+			bcma_write32(dev, 0x528, 0x80000000);
+			tmp = bcma_read32(dev, 0x314);
+			udelay(265);
+			bcma_write32(dev, 0x200, 0x7ff);
+			udelay(10);
+
+			/* Take USB and HSIC out of non-driving modes */
+			bcma_write32(dev, 0x510, 0);
+		} else {
+			bcma_write32(dev, 0x200, 0x7ff);
+
+			udelay(1);
+		}
+
+		bcma_hcd_4716wa(dev);
+	}
+}
+
+static const struct usb_ehci_pdata ehci_pdata = {
+};
+
+static const struct usb_ohci_pdata ohci_pdata = {
+};
+
+static struct platform_device * __devinit
+bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr)
+{
+	struct platform_device *hci_dev;
+	struct resource hci_res[2];
+	int ret = -ENOMEM;
+
+	memset(hci_res, 0, sizeof(hci_res));
+
+	hci_res[0].start = addr;
+	hci_res[0].end = hci_res[0].start + 0x1000 - 1;
+	hci_res[0].flags = IORESOURCE_MEM;
+
+	hci_res[1].start = dev->irq;
+	hci_res[1].flags = IORESOURCE_IRQ;
+
+	hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
+					"ehci-platform" , 0);
+	if (!hci_dev)
+		return NULL;
+
+	hci_dev->dev.parent = &dev->dev;
+	hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
+
+	ret = platform_device_add_resources(hci_dev, hci_res,
+					    ARRAY_SIZE(hci_res));
+	if (ret)
+		goto err_alloc;
+	if (ohci)
+		ret = platform_device_add_data(hci_dev, &ohci_pdata,
+					       sizeof(ohci_pdata));
+	else
+		ret = platform_device_add_data(hci_dev, &ehci_pdata,
+					       sizeof(ehci_pdata));
+	if (ret)
+		goto err_alloc;
+	ret = platform_device_add(hci_dev);
+	if (ret)
+		goto err_alloc;
+
+	return hci_dev;
+
+err_alloc:
+	platform_device_put(hci_dev);
+	return ERR_PTR(ret);
+}
+
+static int __devinit bcma_hcd_probe(struct bcma_device *dev)
+{
+	int err;
+	u16 chipid_top;
+	u32 ohci_addr;
+	struct bcma_hcd_device *usb_dev;
+	struct bcma_chipinfo *chipinfo;
+
+	chipinfo = &dev->bus->chipinfo;
+	/* USBcores are only connected on embedded devices. */
+	chipid_top = (chipinfo->id & 0xFF00);
+	if (chipid_top != 0x4700 && chipid_top != 0x5300)
+		return -ENODEV;
+
+	/* TODO: Probably need checks here; is the core connected? */
+
+	if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
+	    dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
+		return -EOPNOTSUPP;
+
+	usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL);
+	if (!usb_dev)
+		return -ENOMEM;
+
+	bcma_hcd_init_chip(dev);
+
+	/* In AI chips EHCI is addrspace 0, OHCI is 1 */
+	ohci_addr = dev->addr1;
+	if ((chipinfo->id == 0x5357 || chipinfo->id == 0x4749)
+	    && chipinfo->rev == 0)
+		ohci_addr = 0x18009000;
+
+	usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr);
+	if (IS_ERR(usb_dev->ohci_dev)) {
+		err = PTR_ERR(usb_dev->ohci_dev);
+		goto err_free_usb_dev;
+	}
+
+	usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr);
+	if (IS_ERR(usb_dev->ehci_dev)) {
+		err = PTR_ERR(usb_dev->ehci_dev);
+		goto err_unregister_ohci_dev;
+	}
+
+	bcma_set_drvdata(dev, usb_dev);
+	return 0;
+
+err_unregister_ohci_dev:
+	platform_device_unregister(usb_dev->ohci_dev);
+err_free_usb_dev:
+	kfree(usb_dev);
+	return err;
+}
+
+static void __devexit bcma_hcd_remove(struct bcma_device *dev)
+{
+	struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
+	struct platform_device *ohci_dev = usb_dev->ohci_dev;
+	struct platform_device *ehci_dev = usb_dev->ehci_dev;
+
+	if (ohci_dev)
+		platform_device_unregister(ohci_dev);
+	if (ehci_dev)
+		platform_device_unregister(ehci_dev);
+
+	bcma_core_disable(dev, 0);
+}
+
+static void bcma_hcd_shutdown(struct bcma_device *dev)
+{
+	bcma_core_disable(dev, 0);
+}
+
+#ifdef CONFIG_PM
+
+static int bcma_hcd_suspend(struct bcma_device *dev)
+{
+	bcma_core_disable(dev, 0);
+
+	return 0;
+}
+
+static int bcma_hcd_resume(struct bcma_device *dev)
+{
+	bcma_core_enable(dev, 0);
+
+	return 0;
+}
+
+#else /* !CONFIG_PM */
+#define bcma_hcd_suspend	NULL
+#define bcma_hcd_resume	NULL
+#endif /* CONFIG_PM */
+
+static const struct bcma_device_id bcma_hcd_table[] __devinitconst = {
+	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
+	BCMA_CORETABLE_END
+};
+MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
+
+static struct bcma_driver bcma_hcd_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= bcma_hcd_table,
+	.probe		= bcma_hcd_probe,
+	.remove		= __devexit_p(bcma_hcd_remove),
+	.shutdown	= bcma_hcd_shutdown,
+	.suspend	= bcma_hcd_suspend,
+	.resume		= bcma_hcd_resume,
+};
+
+static int __init bcma_hcd_init(void)
+{
+	return bcma_driver_register(&bcma_hcd_driver);
+}
+module_init(bcma_hcd_init);
+
+static void __exit bcma_hcd_exit(void)
+{
+	bcma_driver_unregister(&bcma_hcd_driver);
+}
+module_exit(bcma_hcd_exit);
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index d0a84bd3f3e..34acfcee740 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -1,6 +1,6 @@
 /*
  * Copyright 2005-2009 MontaVista Software, Inc.
- * Copyright 2008      Freescale Semiconductor, Inc.
+ * Copyright 2008,2012      Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -211,22 +211,32 @@ static void usb_hcd_fsl_remove(struct usb_hcd *hcd,
 	usb_put_hcd(hcd);
 }
 
-static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,
+static void ehci_fsl_setup_phy(struct usb_hcd *hcd,
 			       enum fsl_usb2_phy_modes phy_mode,
 			       unsigned int port_offset)
 {
-	u32 portsc;
-	struct usb_hcd *hcd = ehci_to_hcd(ehci);
+	u32 portsc, temp;
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 	void __iomem *non_ehci = hcd->regs;
-	struct fsl_usb2_platform_data *pdata;
+	struct device *dev = hcd->self.controller;
+	struct fsl_usb2_platform_data *pdata = dev->platform_data;
 
-	pdata = hcd->self.controller->platform_data;
+	if (pdata->controller_ver < 0) {
+		dev_warn(hcd->self.controller, "Could not get controller version\n");
+		return;
+	}
 
 	portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
 	portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);
 
 	switch (phy_mode) {
 	case FSL_USB2_PHY_ULPI:
+		if (pdata->controller_ver) {
+			/* controller version 1.6 or above */
+			temp = in_be32(non_ehci + FSL_SOC_USB_CTRL);
+			out_be32(non_ehci + FSL_SOC_USB_CTRL, temp |
+				USB_CTRL_USB_EN | ULPI_PHY_CLK_SEL);
+		}
 		portsc |= PORT_PTS_ULPI;
 		break;
 	case FSL_USB2_PHY_SERIAL:
@@ -236,6 +246,14 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,
 		portsc |= PORT_PTS_PTW;
 		/* fall through */
 	case FSL_USB2_PHY_UTMI:
+		if (pdata->controller_ver) {
+			/* controller version 1.6 or above */
+			temp = in_be32(non_ehci + FSL_SOC_USB_CTRL);
+			out_be32(non_ehci + FSL_SOC_USB_CTRL, temp |
+				UTMI_PHY_EN | USB_CTRL_USB_EN);
+			mdelay(FSL_UTMI_PHY_DLY);  /* Delay for UTMI PHY CLK to
+						become stable - 10ms*/
+		}
 		/* enable UTMI PHY */
 		if (pdata->have_sysif_regs)
 			setbits32(non_ehci + FSL_SOC_USB_CTRL,
@@ -276,7 +294,7 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci)
 
 	if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
 			(pdata->operating_mode == FSL_USB2_DR_OTG))
-		ehci_fsl_setup_phy(ehci, pdata->phy_mode, 0);
+		ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0);
 
 	if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
 		unsigned int chip, rev, svr;
@@ -290,9 +308,9 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci)
 			ehci->has_fsl_port_bug = 1;
 
 		if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
-			ehci_fsl_setup_phy(ehci, pdata->phy_mode, 0);
+			ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0);
 		if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
-			ehci_fsl_setup_phy(ehci, pdata->phy_mode, 1);
+			ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1);
 	}
 
 	if (pdata->have_sysif_regs) {
diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h
index 863fb0c080d..88403684d10 100644
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -1,4 +1,4 @@
-/* Copyright (C) 2005-2010 Freescale Semiconductor, Inc.
+/* Copyright (C) 2005-2010,2012 Freescale Semiconductor, Inc.
  * Copyright (c) 2005 MontaVista Software
  *
  * This program is free software; you can redistribute  it and/or modify it
@@ -50,4 +50,15 @@
 #define CTRL_UTMI_PHY_EN	(1<<9)
 #define CTRL_PHY_CLK_VALID	(1 << 17)
 #define SNOOP_SIZE_2GB		0x1e
+
+/* control Register Bit Masks */
+#define ULPI_INT_EN             (1<<0)
+#define WU_INT_EN               (1<<1)
+#define USB_CTRL_USB_EN         (1<<2)
+#define LINE_STATE_FILTER__EN   (1<<3)
+#define KEEP_OTG_ON             (1<<4)
+#define OTG_PORT                (1<<5)
+#define PLL_RESET               (1<<8)
+#define UTMI_PHY_EN             (1<<9)
+#define ULPI_PHY_CLK_SEL        (1<<10)
 #endif				/* _EHCI_FSL_H */
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 4a3bc5b7a06..a87c0573c86 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -417,9 +417,6 @@ static void ehci_iaa_watchdog(unsigned long param)
 		 * CMD_IAAD when it sets STS_IAA.)
 		 */
 		cmd = ehci_readl(ehci, &ehci->regs->command);
-		if (cmd & CMD_IAAD)
-			ehci_writel(ehci, cmd & ~CMD_IAAD,
-					&ehci->regs->command);
 
 		/* If IAA is set here i