Merge remote branch 'origin' into secretlab/next-devicetree

Merging in current state of Linus' tree to deal with merge conflicts and
build failures in vio.c after merge.

Conflicts:
	drivers/i2c/busses/i2c-cpm.c
	drivers/i2c/busses/i2c-mpc.c
	drivers/net/gianfar.c

Also fixed up one line in arch/powerpc/kernel/vio.c to use the
correct node pointer.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

54 files changed, 3219 insertions, 6355 deletions

diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index a0ecb42cb33..bd8aab0ef1c 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -425,6 +425,16 @@ config USB_SERIAL_MOS7720
 	  To compile this driver as a module, choose M here: the
 	  module will be called mos7720.
 
+config USB_SERIAL_MOS7715_PARPORT
+	bool "Support for parallel port on the Moschip 7715"
+	depends on USB_SERIAL_MOS7720
+	depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
+	select PARPORT_NOT_PC
+	---help---
+	Say Y if you have a Moschip 7715 device and would like to use
+	the parallel port it provides.  The port will register with
+	the parport subsystem as a low-level driver.
+
 config USB_SERIAL_MOS7840
 	tristate "USB Moschip 7840/7820 USB Serial Driver"
 	---help---
@@ -485,6 +495,7 @@ config USB_SERIAL_QCAUX
 
 config USB_SERIAL_QUALCOMM
 	tristate "USB Qualcomm Serial modem"
+	select USB_SERIAL_WWAN
 	help
 	  Say Y here if you have a Qualcomm USB modem device.  These are
 	  usually wireless cellular modems.
@@ -576,8 +587,12 @@ config USB_SERIAL_XIRCOM
 	  To compile this driver as a module, choose M here: the
 	  module will be called keyspan_pda.
 
+config USB_SERIAL_WWAN
+	tristate
+
 config USB_SERIAL_OPTION
 	tristate "USB driver for GSM and CDMA modems"
+	select USB_SERIAL_WWAN
 	help
 	  Say Y here if you have a GSM or CDMA modem that's connected to USB.
 
@@ -619,6 +634,14 @@ config USB_SERIAL_VIVOPAY_SERIAL
           To compile this driver as a module, choose M here: the
           module will be called vivopay-serial.
 
+config USB_SERIAL_ZIO
+	tristate "ZIO Motherboard USB serial interface driver"
+	help
+	  Say Y here if you want to use ZIO Motherboard.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called zio.
+
 config USB_SERIAL_DEBUG
 	tristate "USB Debugging Device"
 	help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 83c9e431a56..e54c728c016 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -52,9 +52,11 @@ obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI)		+= siemens_mpi.o
 obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS)		+= sierra.o
 obj-$(CONFIG_USB_SERIAL_SPCP8X5)		+= spcp8x5.o
 obj-$(CONFIG_USB_SERIAL_SYMBOL)			+= symbolserial.o
+obj-$(CONFIG_USB_SERIAL_WWAN)			+= usb_wwan.o
 obj-$(CONFIG_USB_SERIAL_TI)			+= ti_usb_3410_5052.o
 obj-$(CONFIG_USB_SERIAL_VISOR)			+= visor.o
 obj-$(CONFIG_USB_SERIAL_WHITEHEAT)		+= whiteheat.o
 obj-$(CONFIG_USB_SERIAL_XIRCOM)			+= keyspan_pda.o
 obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL)	+= vivopay-serial.o
+obj-$(CONFIG_USB_SERIAL_ZIO)			+= zio.o
 
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 4fd7af98b1a..0db6ace16f7 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -1,7 +1,9 @@
 /*
  * AIRcable USB Bluetooth Dongle Driver.
  *
+ * Copyright (C) 2010 Johan Hovold <jhovold@gmail.com>
  * Copyright (C) 2006 Manuel Francisco Naranjo (naranjo.manuel@gmail.com)
+ *
  * This program is free software; you can redistribute it and/or modify it under
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
@@ -42,10 +44,10 @@
  *
  */
 
+#include <asm/unaligned.h>
 #include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/tty_flip.h>
-#include <linux/circ_buf.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
@@ -55,16 +57,12 @@ static int debug;
 #define AIRCABLE_VID		0x16CA
 #define AIRCABLE_USB_PID	0x1502
 
-/* write buffer size defines */
-#define AIRCABLE_BUF_SIZE	2048
-
 /* Protocol Stuff */
 #define HCI_HEADER_LENGTH	0x4
 #define TX_HEADER_0		0x20
 #define TX_HEADER_1		0x29
 #define RX_HEADER_0		0x00
 #define RX_HEADER_1		0x20
-#define MAX_HCI_FRAMESIZE	60
 #define HCI_COMPLETE_FRAME	64
 
 /* rx_flags */
@@ -74,8 +72,8 @@ static int debug;
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.0b2"
-#define DRIVER_AUTHOR "Naranjo, Manuel Francisco <naranjo.manuel@gmail.com>"
+#define DRIVER_VERSION "v2.0"
+#define DRIVER_AUTHOR "Naranjo, Manuel Francisco <naranjo.manuel@gmail.com>, Johan Hovold <jhovold@gmail.com>"
 #define DRIVER_DESC "AIRcable USB Driver"
 
 /* ID table that will be registered with USB core */
@@ -85,226 +83,21 @@ static const struct usb_device_id id_table[] = {
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
-
-/* Internal Structure */
-struct aircable_private {
-	spinlock_t rx_lock;		/* spinlock for the receive lines */
-	struct circ_buf *tx_buf;	/* write buffer */
-	struct circ_buf *rx_buf;	/* read buffer */
-	int rx_flags;			/* for throttilng */
-	struct work_struct rx_work;	/* work cue for the receiving line */
-	struct usb_serial_port *port;	/* USB port with which associated */
-};
-
-/* Private methods */
-
-/* Circular Buffer Methods, code from ti_usb_3410_5052 used */
-/*
- * serial_buf_clear
- *
- * Clear out all data in the circular buffer.
- */
-static void serial_buf_clear(struct circ_buf *cb)
-{
-	cb->head = cb->tail = 0;
-}
-
-/*
- * serial_buf_alloc
- *
- * Allocate a circular buffer and all associated memory.
- */
-static struct circ_buf *serial_buf_alloc(void)
-{
-	struct circ_buf *cb;
-	cb = kmalloc(sizeof(struct circ_buf), GFP_KERNEL);
-	if (cb == NULL)
-		return NULL;
-	cb->buf = kmalloc(AIRCABLE_BUF_SIZE, GFP_KERNEL);
-	if (cb->buf == NULL) {
-		kfree(cb);
-		return NULL;
-	}
-	serial_buf_clear(cb);
-	return cb;
-}
-
-/*
- * serial_buf_free
- *
- * Free the buffer and all associated memory.
- */
-static void serial_buf_free(struct circ_buf *cb)
-{
-	kfree(cb->buf);
-	kfree(cb);
-}
-
-/*
- * serial_buf_data_avail
- *
- * Return the number of bytes of data available in the circular
- * buffer.
- */
-static int serial_buf_data_avail(struct circ_buf *cb)
-{
-	return CIRC_CNT(cb->head, cb->tail, AIRCABLE_BUF_SIZE);
-}
-
-/*
- * serial_buf_put
- *
- * Copy data data from a user buffer and put it into the circular buffer.
- * Restrict to the amount of space available.
- *
- * Return the number of bytes copied.
- */
-static int serial_buf_put(struct circ_buf *cb, const char *buf, int count)
-{
-	int c, ret = 0;
-	while (1) {
-		c = CIRC_SPACE_TO_END(cb->head, cb->tail, AIRCABLE_BUF_SIZE);
-		if (count < c)
-			c = count;
-		if (c <= 0)
-			break;
-		memcpy(cb->buf + cb->head, buf, c);
-		cb->head = (cb->head + c) & (AIRCABLE_BUF_SIZE-1);
-		buf += c;
-		count -= c;
-		ret = c;
-	}
-	return ret;
-}
-
-/*
- * serial_buf_get
- *
- * Get data from the circular buffer and copy to the given buffer.
- * Restrict to the amount of data available.
- *
- * Return the number of bytes copied.
- */
-static int serial_buf_get(struct circ_buf *cb, char *buf, int count)
-{
-	int c, ret = 0;
-	while (1) {
-		c = CIRC_CNT_TO_END(cb->head, cb->tail, AIRCABLE_BUF_SIZE);
-		if (count < c)
-			c = count;
-		if (c <= 0)
-			break;
-		memcpy(buf, cb->buf + cb->tail, c);
-		cb->tail = (cb->tail + c) & (AIRCABLE_BUF_SIZE-1);
-		buf += c;
-		count -= c;
-		ret = c;
-	}
-	return ret;
-}
-
-/* End of circula buffer methods */
-
-static void aircable_send(struct usb_serial_port *port)
+static int aircable_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size)
 {
-	int count, result;
-	struct aircable_private *priv = usb_get_serial_port_data(port);
-	unsigned char *buf;
-	__le16 *dbuf;
-	dbg("%s - port %d", __func__, port->number);
-	if (port->write_urb_busy)
-		return;
-
-	count = min(serial_buf_data_avail(priv->tx_buf), MAX_HCI_FRAMESIZE);
-	if (count == 0)
-		return;
-
-	buf = kzalloc(count + HCI_HEADER_LENGTH, GFP_ATOMIC);
-	if (!buf) {
-		dev_err(&port->dev, "%s- kzalloc(%d) failed.\n",
-			__func__, count + HCI_HEADER_LENGTH);
-		return;
-	}
+	int count;
+	unsigned char *buf = dest;
 
+	count = kfifo_out_locked(&port->write_fifo, buf + HCI_HEADER_LENGTH,
+					size - HCI_HEADER_LENGTH, &port->lock);
 	buf[0] = TX_HEADER_0;
 	buf[1] = TX_HEADER_1;
-	dbuf = (__le16 *)&buf[2];
-	*dbuf = cpu_to_le16((u16)count);
-	serial_buf_get(priv->tx_buf, buf + HCI_HEADER_LENGTH,
-							MAX_HCI_FRAMESIZE);
-
-	memcpy(port->write_urb->transfer_buffer, buf,
-	       count + HCI_HEADER_LENGTH);
-
-	kfree(buf);
-	port->write_urb_busy = 1;
-	usb_serial_debug_data(debug, &port->dev, __func__,
-			      count + HCI_HEADER_LENGTH,
-			      port->write_urb->transfer_buffer);
-	port->write_urb->transfer_buffer_length = count + HCI_HEADER_LENGTH;
-	port->write_urb->dev = port->serial->dev;
-	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-
-	if (result) {
-		dev_err(&port->dev,
-			"%s - failed submitting write urb, error %d\n",
-			__func__, result);
-		port->write_urb_busy = 0;
-	}
+	put_unaligned_le16(count, &buf[2]);
 
-	schedule_work(&port->work);
+	return count + HCI_HEADER_LENGTH;
 }
 
-static void aircable_read(struct work_struct *work)
-{
-	struct aircable_private *priv =
-		container_of(work, struct aircable_private, rx_work);
-	struct usb_serial_port *port = priv->port;
-	struct tty_struct *tty;
-	unsigned char *data;
-	int count;
-	if (priv->rx_flags & THROTTLED) {
-		if (priv->rx_flags & ACTUALLY_THROTTLED)
-			schedule_work(&priv->rx_work);
-		return;
-	}
-
-	/* By now I will flush data to the tty in packages of no more than
-	 * 64 bytes, to ensure I do not get throttled.
-	 * Ask USB mailing list for better aproach.
-	 */
-	tty = tty_port_tty_get(&port->port);
-
-	if (!tty) {
-		schedule_work(&priv->rx_work);
-		dev_err(&port->dev, "%s - No tty available\n", __func__);
-		return ;
-	}
-
-	count = min(64, serial_buf_data_avail(priv->rx_buf));
-
-	if (count <= 0)
-		goto out; /* We have finished sending everything. */
-
-	tty_prepare_flip_string(tty, &data, count);
-	if (!data) {
-		dev_err(&port->dev, "%s- kzalloc(%d) failed.",
-							__func__, count);
-		goto out;
-	}
-
-	serial_buf_get(priv->rx_buf, data, count);
-
-	tty_flip_buffer_push(tty);
-
-	if (serial_buf_data_avail(priv->rx_buf))
-		schedule_work(&priv->rx_work);
-out:		
-	tty_kref_put(tty);
-	return;
-}
-/* End of private methods */
-
 static int aircable_probe(struct usb_serial *serial,
 			  const struct usb_device_id *id)
 {
@@ -330,247 +123,50 @@ static int aircable_probe(struct usb_serial *serial,
 	return 0;
 }
 
-static int aircable_attach(struct usb_serial *serial)
-{
-	struct usb_serial_port *port = serial->port[0];
-	struct aircable_private *priv;
-
-	priv = kzalloc(sizeof(struct aircable_private), GFP_KERNEL);
-	if (!priv) {
-		dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
-			sizeof(struct aircable_private));
-		return -ENOMEM;
-	}
-
-	/* Allocation of Circular Buffers */
-	priv->tx_buf = serial_buf_alloc();
-	if (priv->tx_buf == NULL) {
-		kfree(priv);
-		return -ENOMEM;
-	}
-
-	priv->rx_buf = serial_buf_alloc();
-	if (priv->rx_buf == NULL) {
-		kfree(priv->tx_buf);
-		kfree(priv);
-		return -ENOMEM;
-	}
-
-	priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
-	priv->port = port;
-	INIT_WORK(&priv->rx_work, aircable_read);
-
-	usb_set_serial_port_data(serial->port[0], priv);
-
-	return 0;
-}
-
-static void aircable_release(struct usb_serial *serial)
+static int aircable_process_packet(struct tty_struct *tty,
+			struct usb_serial_port *port, int has_headers,
+			char *packet, int len)
 {
-
-	struct usb_serial_port *port = serial->port[0];
-	struct aircable_private *priv = usb_get_serial_port_data(port);
-
-	dbg("%s", __func__);
-
-	if (priv) {
-		serial_buf_free(priv->tx_buf);
-		serial_buf_free(priv->rx_buf);
-		kfree(priv);
+	if (has_headers) {
+		len -= HCI_HEADER_LENGTH;
+		packet += HCI_HEADER_LENGTH;
 	}
-}
-
-static int aircable_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct aircable_private *priv = usb_get_serial_port_data(port);
-	return serial_buf_data_avail(priv->tx_buf);
-}
-
-static int aircable_write(struct tty_struct *tty, struct usb_serial_port *port,
-			  const unsigned char *source, int count)
-{
-	struct aircable_private *priv = usb_get_serial_port_data(port);
-	int temp;
-
-	dbg("%s - port %d, %d bytes", __func__, port->number, count);
-
-	usb_serial_debug_data(debug, &port->dev, __func__, count, source);
-
-	if (!count) {
-		dbg("%s - write request of 0 bytes", __func__);
-		return count;
+	if (len <= 0) {
+		dbg("%s - malformed packet", __func__);
+		return 0;
 	}
 
-	temp = serial_buf_put(priv->tx_buf, source, count);
-
-	aircable_send(port);
-
-	if (count > AIRCABLE_BUF_SIZE)
-		count = AIRCABLE_BUF_SIZE;
-
-	return count;
+	tty_insert_flip_string(tty, packet, len);
 
+	return len;
 }
 
-static void aircable_write_bulk_callback(struct urb *urb)
+static void aircable_process_read_urb(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
-	int status = urb->status;
-	int result;
-
-	dbg("%s - urb status: %d", __func__ , status);
-
-	/* This has been taken from cypress_m8.c cypress_write_int_callback */
-	switch (status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d",
-		    __func__, status);
-		port->write_urb_busy = 0;
-		return;
-	default:
-		/* error in the urb, so we have to resubmit it */
-		dbg("%s - Overflow in write", __func__);
-		dbg("%s - nonzero write bulk status received: %d",
-		    __func__, status);
-		port->write_urb->transfer_buffer_length = 1;
-		port->write_urb->dev = port->serial->dev;
-		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-		if (result)
-			dev_err(&urb->dev->dev,
-			    "%s - failed resubmitting write urb, error %d\n",
-							__func__, result);
-		else
-			return;
-	}
-
-	port->write_urb_busy = 0;
-
-	aircable_send(port);
-}
-
-static void aircable_read_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	struct aircable_private *priv = usb_get_serial_port_data(port);
+	char *data = (char *)urb->transfer_buffer;
 	struct tty_struct *tty;
-	unsigned long no_packages, remaining, package_length, i;
-	int result, shift = 0;
-	unsigned char *temp;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status) {
-		dbg("%s - urb status = %d", __func__, status);
-		if (status == -EPROTO) {
-			dbg("%s - caught -EPROTO, resubmitting the urb",
-			    __func__);
-			usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-				usb_rcvbulkpipe(port->serial->dev,
-					port->bulk_in_endpointAddress),
-				port->read_urb->transfer_buffer,
-				port->read_urb->transfer_buffer_length,
-				aircable_read_bulk_callback, port);
-
-			result = usb_submit_urb(urb, GFP_ATOMIC);
-			if (result)
-				dev_err(&urb->dev->dev,
-					"%s - failed resubmitting read urb, error %d\n",
-					__func__, result);
-			return;
-		}
-		dbg("%s - unable to handle the error, exiting.", __func__);
-		return;
-	}
-
-	usb_serial_debug_data(debug, &port->dev, __func__,
-				urb->actual_length, urb->transfer_buffer);
+	int has_headers;
+	int count;
+	int len;
+	int i;
 
 	tty = tty_port_tty_get(&port->port);
-	if (tty && urb->actual_length) {
-		if (urb->actual_length <= 2) {
-			/* This is an incomplete package */
-			serial_buf_put(priv->rx_buf, urb->transfer_buffer,
-				       urb->actual_length);
-		} else {
-			temp = urb->transfer_buffer;
-			if (temp[0] == RX_HEADER_0)
-				shift = HCI_HEADER_LENGTH;
-
-			remaining = urb->actual_length;
-			no_packages = urb->actual_length / (HCI_COMPLETE_FRAME);
-
-			if (urb->actual_length % HCI_COMPLETE_FRAME != 0)
-				no_packages++;
+	if (!tty)
+		return;
 
-			for (i = 0; i < no_packages; i++) {
-				if (remaining > (HCI_COMPLETE_FRAME))
-					package_length = HCI_COMPLETE_FRAME;
-				else
-					package_length = remaining;
-				remaining -= package_length;
+	has_headers = (urb->actual_length > 2 && data[0] == RX_HEADER_0);
 
-				serial_buf_put(priv->rx_buf,
-					urb->transfer_buffer + shift +
-					(HCI_COMPLETE_FRAME) * (i),
-					package_length - shift);
-			}
-		}
-		aircable_read(&priv->rx_work);
+	count = 0;
+	for (i = 0; i < urb->actual_length; i += HCI_COMPLETE_FRAME) {
+		len = min_t(int, urb->actual_length - i, HCI_COMPLETE_FRAME);
+		count += aircable_process_packet(tty, port, has_headers,
+								&data[i], len);
 	}
-	tty_kref_put(tty);
-
-	/* Schedule the next read */
-	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-			  usb_rcvbulkpipe(port->serial->dev,
-				  port->bulk_in_endpointAddress),
-			  port->read_urb->transfer_buffer,
-			  port->read_urb->transfer_buffer_length,
-			  aircable_read_bulk_callback, port);
-
-	result = usb_submit_urb(urb, GFP_ATOMIC);
-	if (result && result != -EPERM)
-		dev_err(&urb->dev->dev,
-			"%s - failed resubmitting read urb, error %d\n",
-			__func__, result);
-}
-
-/* Based on ftdi_sio.c throttle */
-static void aircable_throttle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct aircable_private *priv = usb_get_serial_port_data(port);
 
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irq(&priv->rx_lock);
-	priv->rx_flags |= THROTTLED;
-	spin_unlock_irq(&priv->rx_lock);
-}
-
-/* Based on ftdi_sio.c unthrottle */
-static void aircable_unthrottle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct aircable_private *priv = usb_get_serial_port_data(port);
-	int actually_throttled;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irq(&priv->rx_lock);
-	actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
-	priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
-	spin_unlock_irq(&priv->rx_lock);
-
-	if (actually_throttled)
-		schedule_work(&priv->rx_work);
+	if (count)
+		tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
 }
 
 static struct usb_driver aircable_driver = {
@@ -589,15 +185,12 @@ static struct usb_serial_driver aircable_device = {
 	.usb_driver = 		&aircable_driver,
 	.id_table = 		id_table,
 	.num_ports =		1,
-	.attach =		aircable_attach,
+	.bulk_out_size =	HCI_COMPLETE_FRAME,
 	.probe =		aircable_probe,
-	.release =		aircable_release,
-	.write =		aircable_write,
-	.write_room =		aircable_write_room,
-	.write_bulk_callback =	aircable_write_bulk_callback,
-	.read_bulk_callback =	aircable_read_bulk_callback,
-	.throttle =		aircable_throttle,
-	.unthrottle =		aircable_unthrottle,
+	.process_read_urb =	aircable_process_read_urb,
+	.prepare_write_buffer =	aircable_prepare_write_buffer,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
 };
 
 static int __init aircable_init(void)
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 9b66bf19f75..4e41a2a3942 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -42,7 +42,7 @@ static int debug;
  * Version information
  */
 
-#define DRIVER_VERSION "v0.5"
+#define DRIVER_VERSION "v0.6"
 #define DRIVER_AUTHOR "Bart Hartgers <bart.hartgers+ark3116@gmail.com>"
 #define DRIVER_DESC "USB ARK3116 serial/IrDA driver"
 #define DRIVER_DEV_DESC "ARK3116 RS232/IrDA"
@@ -355,14 +355,11 @@ static void ark3116_close(struct usb_serial_port *port)
 		/* deactivate interrupts */
 		ark3116_write_reg(serial, UART_IER, 0);
 
-		/* shutdown any bulk reads that might be going on */
-		if (serial->num_bulk_out)
-			usb_kill_urb(port->write_urb);
-		if (serial->num_bulk_in)
-			usb_kill_urb(port->read_urb);
+		usb_serial_generic_close(port);
 		if (serial->num_interrupt_in)
 			usb_kill_urb(port->interrupt_in_urb);
 	}
+
 }
 
 static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -675,87 +672,45 @@ static void ark3116_read_int_callback(struct urb *urb)
  * error for the next block of data as well...
  * For now, let's pretend this can't happen.
  */
-
-static void send_to_tty(struct tty_struct *tty,
-			const unsigned char *chars,
-			size_t size, char flag)
+static void ark3116_process_read_urb(struct urb *urb)
 {
-	if (size == 0)
-		return;
-	if (flag == TTY_NORMAL) {
-		tty_insert_flip_string(tty, chars, size);
-	} else {
-		int i;
-		for (i = 0; i < size; ++i)
-			tty_insert_flip_char(tty, chars[i], flag);
-	}
-}
-
-static void ark3116_read_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port =  urb->context;
+	struct usb_serial_port *port = urb->context;
 	struct ark3116_private *priv = usb_get_serial_port_data(port);
-	const __u8 *data = urb->transfer_buffer;
-	int status = urb->status;
 	struct tty_struct *tty;
+	unsigned char *data = urb->transfer_buffer;
+	char tty_flag = TTY_NORMAL;
 	unsigned long flags;
-	int result;
-	char flag;
 	__u32 lsr;
 
-	switch (status) {
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d",
-		    __func__, status);
+	/* update line status */
+	spin_lock_irqsave(&priv->status_lock, flags);
+	lsr = priv->lsr;
+	priv->lsr &= ~UART_LSR_BRK_ERROR_BITS;
+	spin_unlock_irqrestore(&priv->status_lock, flags);
+
+	if (!urb->actual_length)
 		return;
-	default:
-		dbg("%s - nonzero urb status received: %d",
-		    __func__, status);
-		break;
-	case 0: /* success */
 
-		spin_lock_irqsave(&priv->status_lock, flags);
-		lsr = priv->lsr;
-		/* clear error bits */
-		priv->lsr &= ~UART_LSR_BRK_ERROR_BITS;
-		spin_unlock_irqrestore(&priv->status_lock, flags);
-
-		if (unlikely(lsr & UART_LSR_BI))
-			flag = TTY_BREAK;
-		else if (unlikely(lsr & UART_LSR_PE))
-			flag = TTY_PARITY;
-		else if (unlikely(lsr & UART_LSR_FE))
-			flag = TTY_FRAME;
-		else
-			flag = TTY_NORMAL;
-
-		tty = tty_port_tty_get(&port->port);
-		if (tty) {
-			/* overrun is special, not associated with a char */
-			if (unlikely(lsr & UART_LSR_OE))
-				tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-			send_to_tty(tty, data, urb->actual_length, flag);
-			tty_flip_buffer_push(tty);
-			tty_kref_put(tty);
-		}
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
+		return;
+
+	if (lsr & UART_LSR_BRK_ERROR_BITS) {
+		if (lsr & UART_LSR_BI)
+			tty_flag = TTY_BREAK;
+		else if (lsr & UART_LSR_PE)
+			tty_flag = TTY_PARITY;
+		else if (lsr & UART_LSR_FE)
+			tty_flag = TTY_FRAME;
 
-		/* Throttle the device if requested by tty */
-		spin_lock_irqsave(&port->lock, flags);
-		port->throttled = port->throttle_req;
-		if (port->throttled) {
-			spin_unlock_irqrestore(&port->lock, flags);
-			return;
-		} else
-			spin_unlock_irqrestore(&port->lock, flags);
+		/* overrun is special, not associated with a char */
+		if (lsr & UART_LSR_OE)
+			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
 	}
-	/* Continue reading from device */
-	result = usb_submit_urb(urb, GFP_ATOMIC);
-	if (result)
-		dev_err(&urb->dev->dev, "%s - failed resubmitting"
-			" read urb, error %d\n", __func__, result);
+	tty_insert_flip_string_fixed_flag(tty, data, tty_flag,
+							urb->actual_length);
+	tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
 }
 
 static struct usb_driver ark3116_driver = {
@@ -785,7 +740,7 @@ static struct usb_serial_driver ark3116_device = {
 	.close =		ark3116_close,
 	.break_ctl = 		ark3116_break_ctl,
 	.read_int_callback = 	ark3116_read_int_callback,
-	.read_bulk_callback =	ark3116_read_bulk_callback,
+	.process_read_urb =	ark3116_process_read_urb,
 };
 
 static int __init ark3116_init(void)
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 1295e44e3f1..36df35295db 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 2000		William Greathouse (wgreathouse@smva.com)
  *  Copyright (C) 2000-2001 	Greg Kroah-Hartman (greg@kroah.com)
+ *  Copyright (C) 2010		Johan Hovold (jhovold@gmail.com)
  *
  *  This program is largely derived from work by the linux-usb group
  *  and associated source files.  Please see the usb/serial files for
@@ -84,7 +85,7 @@ static int debug;
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.2"
+#define DRIVER_VERSION "v1.3"
 #define DRIVER_AUTHOR "William Greathouse <wgreathouse@smva.com>"
 #define DRIVER_DESC "USB Belkin Serial converter driver"
 
@@ -95,6 +96,7 @@ static int  belkin_sa_open(struct tty_struct *tty,
 			struct usb_serial_port *port);
 static void belkin_sa_close(struct usb_serial_port *port);
 static void belkin_sa_read_int_callback(struct urb *urb);
+static void belkin_sa_process_read_urb(struct urb *urb);
 static void belkin_sa_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios * old);
 static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state);
@@ -112,7 +114,6 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(BELKIN_DOCKSTATION_VID, BELKIN_DOCKSTATION_PID) },
 	{ }	/* Terminating entry */
 };
-
 MODULE_DEVICE_TABLE(usb, id_table_combined);
 
 static struct usb_driver belkin_driver = {
@@ -120,7 +121,7 @@ static struct usb_driver belkin_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table_combined,
-	.no_dynamic_id = 	1,
+	.no_dynamic_id =	1,
 };
 
 /* All of the device info needed for the serial converters */
@@ -136,7 +137,7 @@ static struct usb_serial_driver belkin_device = {
 	.open =			belkin_sa_open,
 	.close =		belkin_sa_close,
 	.read_int_callback =	belkin_sa_read_int_callback,
-					/* How we get the status info */
+	.process_read_urb =	belkin_sa_process_read_urb,
 	.set_termios =		belkin_sa_set_termios,
 	.break_ctl =		belkin_sa_break_ctl,
 	.tiocmget =		belkin_sa_tiocmget,
@@ -145,7 +146,6 @@ static struct usb_serial_driver belkin_device = {
 	.release =		belkin_sa_release,
 };
 
-
 struct belkin_sa_private {
 	spinlock_t		lock;
 	unsigned long		control_state;
@@ -196,62 +196,43 @@ static int belkin_sa_startup(struct usb_serial *serial)
 	return 0;
 }
 
-
 static void belkin_sa_release(struct usb_serial *serial)
 {
-	struct belkin_sa_private *priv;
 	int i;
 
 	dbg("%s", __func__);
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		/* My special items, the standard routines free my urbs */
-		priv = usb_get_serial_port_data(serial->port[i]);
-		kfree(priv);
-	}
+	for (i = 0; i < serial->num_ports; ++i)
+		kfree(usb_get_serial_port_data(serial->port[i]));
 }
 
-
-static int  belkin_sa_open(struct tty_struct *tty,
+static int belkin_sa_open(struct tty_struct *tty,
 					struct usb_serial_port *port)
 {
-	int retval = 0;
+	int retval;
 
 	dbg("%s port %d", __func__, port->number);
 
-	/*Start reading from the device*/
-	/* TODO: Look at possibility of submitting multiple URBs to device to
-	 *       enhance buffering.  Win trace shows 16 initial read URBs.
-	 */
-	port->read_urb->dev = port->serial->dev;
-	retval = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (retval) {
-		dev_err(&port->dev, "usb_submit_urb(read bulk) failed\n");
-		goto exit;
-	}
-
-	port->interrupt_in_urb->dev = port->serial->dev;
 	retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (retval) {
-		usb_kill_urb(port->read_urb);
 		dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
+		return retval;
 	}
 
-exit:
-	return retval;
-} /* belkin_sa_open */
+	retval = usb_serial_generic_open(tty, port);
+	if (retval)
+		usb_kill_urb(port->interrupt_in_urb);
 
+	return retval;
+}
 
 static void belkin_sa_close(struct usb_serial_port *port)
 {
 	dbg("%s port %d", __func__, port->number);
 
-	/* shutdown our bulk reads and writes */
-	usb_kill_urb(port->write_urb);
-	usb_kill_urb(port->read_urb);
+	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
-} /* belkin_sa_close */
-
+}
 
 static void belkin_sa_read_int_callback(struct urb *urb)
 {
@@ -310,31 +291,7 @@ static void belkin_sa_read_int_callback(struct urb *urb)
 	else
 		priv->control_state &= ~TIOCM_CD;
 
-	/* Now to report any errors */
 	priv->last_lsr = data[BELKIN_SA_LSR_INDEX];
-#if 0
-	/*
-	 * fill in the flip buffer here, but I do not know the relation
-	 * to the current/next receive buffer or characters.  I need
-	 * to look in to this before committing any code.
-	 */
-	if (priv->last_lsr & BELKIN_SA_LSR_ERR) {
-		tty = tty_port_tty_get(&port->port);
-		/* Overrun Error */
-		if (priv->last_lsr & BELKIN_SA_LSR_OE) {
-		}
-		/* Parity Error */
-		if (priv->last_lsr & BELKIN_SA_LSR_PE) {
-		}
-		/* Framing Error */
-		if (priv->last_lsr & BELKIN_SA_LSR_FE) {
-		}
-		/* Break Indicator */
-		if (priv->last_lsr & BELKIN_SA_LSR_BI) {
-		}
-		tty_kref_put(tty);
-	}
-#endif
 	spin_unlock_irqrestore(&priv->lock, flags);
 exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
@@ -343,6 +300,53 @@ exit:
 			"result %d\n", __func__, retval);
 }
 
+static void belkin_sa_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct belkin_sa_private *priv = usb_get_serial_port_data(port);
+	struct tty_struct *tty;
+	unsigned char *data = urb->transfer_buffer;
+	unsigned long flags;
+	unsigned char status;
+	char tty_flag;
+
+	/* Update line status */
+	tty_flag = TTY_NORMAL;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	status = priv->last_lsr;
+	priv->last_lsr &= ~BELKIN_SA_LSR_ERR;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (!urb->actual_length)
+		return;
+
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
+		return;
+
+	if (status & BELKIN_SA_LSR_ERR) {
+		/* Break takes precedence over parity, which takes precedence
+		 * over framing errors. */
+		if (status & BELKIN_SA_LSR_BI)
+			tty_flag = TTY_BREAK;
+		else if (status & BELKIN_SA_LSR_PE)
+			tty_flag = TTY_PARITY;
+		else if (status & BELKIN_SA_LSR_FE)
+			tty_flag = TTY_FRAME;
+		dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
+
+		/* Overrun is special, not associated with a char. */
+		if (status & BELKIN_SA_LSR_OE)
+			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+	}
+
+	tty_insert_flip_string_fixed_flag(tty, data, tty_flag,
+							urb->actual_length);
+	tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
+}
+
 static void belkin_sa_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
@@ -482,8 +486,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->control_state = control_state;
 	spin_unlock_irqrestore(&priv->lock, flags);
-} /* belkin_sa_set_termios */
-
+}
 
 static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state)
 {
@@ -494,7 +497,6 @@ static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state)
 		dev_err(&port->dev, "Set break_ctl %d\n", break_state);
 }
 
-
 static int belkin_sa_tiocmget(struct tty_struct *tty, struct file *file)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -511,7 +513,6 @@ static int belkin_sa_tiocmget(struct tty_struct *tty, struct file *file)
 	return control_state;
 }
 
-
 static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file,
 			       unsigned int set, unsigned int clear)
 {
@@ -583,7 +584,6 @@ failed_usb_serial_register:
 	return retval;
 }
 
-
 static void __exit belkin_sa_exit (void)
 {
 	usb_deregister(&belkin_driver);
diff --git a/drivers/usb/serial/belkin_sa.h b/drivers/usb/serial/belkin_sa.h
index c66a6730d38..c74b58ab56f 100644
--- a/drivers/usb/serial/belkin_sa.h
+++ b/drivers/usb/serial/belkin_sa.h
@@ -8,10 +8,10 @@
  *  and associated source files.  Please see the usb/serial files for
  *  individual credits and copyrights.
  *
- * 	This program is free software; you can redistribute it and/or modify
- * 	it under the terms of the GNU General Public License as published by
- * 	the Free Software Foundation; either version 2 of the License, or
- * 	(at your option) any later version.
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
  *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
@@ -66,7 +66,7 @@
 #ifdef WHEN_I_LEARN_THIS
 #define BELKIN_SA_SET_MAGIC_REQUEST	17 /* I don't know, possibly flush */
 					   /* (always in Wininit sequence before flow control) */
-#define BELKIN_SA_RESET 		xx /* Reset the port */
+#define BELKIN_SA_RESET			xx /* Reset the port */
 #define BELKIN_SA_GET_MODEM_STATUS	xx /* Force return of modem status register */
 #endif
 
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 7e8e3981841..63f7cc45bca 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -305,10 +305,7 @@ static void ch341_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 
-	/* shutdown our urbs */
-	dbg("%s - shutting down urbs", __func__);
-	usb_kill_urb(port->write_urb);
-	usb_kill_urb(port->read_urb);
+	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
 }
 
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index f347da2ef00..1ee6b2ab0f8 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -66,7 +66,7 @@ static int usb_console_setup(struct console *co, char *options)
 	struct usb_serial_port *port;
 	int retval;
 	struct tty_struct *tty = NULL;
-	struct ktermios *termios = NULL, dummy;
+	struct ktermios dummy;
 
 	dbg("%s", __func__);
 
@@ -141,15 +141,14 @@ static int usb_console_setup(struct console *co, char *options)
 				goto reset_open_count;
 			}
 			kref_init(&tty->kref);
-			termios = kzalloc(sizeof(*termios), GFP_KERNEL);
-			if (!termios) {
+			tty_port_tty_set(&port->port, tty);
+			tty->driver = usb_serial_tty_driver;
+			tty->index = co->index;
+			if (tty_init_termios(tty)) {
 				retval = -ENOMEM;
 				err("no more memory");
 				goto free_tty;
 			}
-			memset(&dummy, 0, sizeof(struct ktermios));
-			tty->termios = termios;
-			tty_port_tty_set(&port->port, tty);
 		}
 
 		/* only call the device specific open if this
@@ -161,16 +160,16 @@ static int usb_console_setup(struct console *co, char *options)
 
 		if (retval) {
 			err("could not open USB console port");
-			goto free_termios;
+			goto fail;
 		}
 
 		if (serial->type->set_termios) {
-			termios->c_cflag = cflag;
-			tty_termios_encode_baud_rate(termios, baud, baud);
+			tty->termios->c_cflag = cflag;
+			tty_termios_encode_baud_rate(tty->termios, baud, baud);
+			memset(&dummy, 0, sizeof(struct ktermios));
 			serial->type->set_termios(tty, port, &dummy);
 
 			tty_port_tty_set(&port->port, NULL);
-			kfree(termios);
 			kfree(tty);
 		}
 		set_bit(ASYNCB_INITIALIZED, &port->port.flags);
@@ -180,14 +179,12 @@ static int usb_console_setup(struct console *co, char *options)
 	--port->port.count;
 	/* The console is special in terms of closing the device so
 	 * indicate this port is now acting as a system console. */
-	port->console = 1;
 	port->port.console = 1;
 
 	mutex_unlock(&serial->disc_mutex);
 	return retval;
 
- free_termios:
-	kfree(termios);
+ fail:
 	tty_port_tty_set(&port->port, NULL);
  free_tty:
 	kfree(tty);
@@ -217,7 +214,7 @@ static void usb_console_write(struct console *co,
 
 	dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
 
-	if (!port->console) {
+	if (!port->port.console) {
 		dbg("%s - port not opened", __func__);
 		return;
 	}
@@ -313,7 +310,7 @@ void usb_serial_console_exit(void)
 {
 	if (usbcons_info.port) {
 		unregister_console(&usbcons);
-		usbcons_info.port->console = 0;
+		usbcons_info.port->port.console = 0;
 		usbcons_info.port = NULL;
 	}
 }
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index ec9b0449ccf..8b8c7976b4c 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -34,7 +34,6 @@
  * Function Prototypes
  */
 static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
-static void cp210x_cleanup(struct usb_serial_port *);
 static void cp210x_close(struct usb_serial_port *);
 static void cp210x_get_termios(struct tty_struct *,
 	struct usb_serial_port *port);
@@ -49,7 +48,6 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *,
 		unsigned int, unsigned int);
 static void cp210x_break_ctl(struct tty_struct *, int);
 static int cp210x_startup(struct usb_serial *);
-static void cp210x_disconnect(struct usb_serial *);
 static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
 static int cp210x_carrier_raised(struct usb_serial_port *p);
 
@@ -61,6 +59,8 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
 	{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
 	{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
+	{ USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
+	{ USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
 	{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
 	{ USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
 	{ USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
@@ -72,9 +72,12 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
 	{ USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
 	{ USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
+	{ USB_DEVICE(0x10C4, 0x8044) }, /* Cygnal Debug Adapter */
+	{ USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME build-in converter */
 	{ USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
 	{ USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */
 	{ USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
+	{ USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
 	{ USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
 	{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
 	{ USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
@@ -82,12 +85,15 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
 	{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
 	{ USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
+	{ USB_DEVICE(0x10C4, 0x8149) }, /* West Mountain Radio Computerized Battery Analyzer */
 	{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
 	{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
 	{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+	{ USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
 	{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
 	{ USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
 	{ USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
+	{ USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */
 	{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
 	{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
 	{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
@@ -105,6 +111,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
+	{ USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
 	{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
 	{ USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
 	{ USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
@@ -115,6 +122,8 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
 	{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
 	{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
+	{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
+	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
 	{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
 	{ } /* Terminating Entry */
@@ -138,6 +147,8 @@ static struct usb_serial_driver cp210x_device = {
 	.usb_driver		= &cp210x_driver,
 	.id_table		= id_table,
 	.num_ports		= 1,
+	.bulk_in_size		= 256,
+	.bulk_out_size		= 256,
 	.open			= cp210x_open,
 	.close			= cp210x_close,
 	.break_ctl		= cp210x_break_ctl,
@@ -145,7 +156,6 @@ static struct usb_serial_driver cp210x_device = {
 	.tiocmget 		= cp210x_tiocmget,
 	.tiocmset		= cp210x_tiocmset,
 	.attach			= cp210x_startup,
-	.disconnect		= cp210x_disconnect,
 	.dtr_rts		= cp210x_dtr_rts,
 	.carrier_raised		= cp210x_carrier_raised
 };
@@ -370,7 +380,6 @@ static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
 
 static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
-	struct usb_serial *serial = port->serial;
 	int result;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -381,49 +390,20 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
 		return -EPROTO;
 	}
 
-	/* Start reading from the device */
-	usb_fill_bulk_urb(port->read_urb, serial->dev,
-			usb_rcvbulkpipe(serial->dev,
-			port->bulk_in_endpointAddress),
-			port->read_urb->transfer_buffer,
-			port->read_urb->transfer_buffer_length,
-			serial->type->read_bulk_callback,
-			port);
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result) {
-		dev_err(&port->dev, "%s - failed resubmitting read urb, "
-				"error %d\n", __func__, result);
+	result = usb_serial_generic_open(tty, port);
+	if (result)
 		return result;
-	}
 
 	/* Configure the termios structure */
 	cp210x_get_termios(tty, port);
 	return 0;
 }
 
-static void cp210x_cleanup(struct usb_serial_port *port)
-{
-	struct usb_serial *serial = port->serial;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (serial->dev) {
-		/* shutdown any bulk reads that might be going on */
-		if (serial->num_bulk_out)
-			usb_kill_urb(port->write_urb);
-		if (serial->num_bulk_in)
-			usb_kill_urb(port->read_urb);
-	}
-}
-
 static void cp210x_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 
-	/* shutdown our urbs */
-	dbg("%s - shutting down urbs", __func__);
-	usb_kill_urb(port->write_urb);
-	usb_kill_urb(port->read_urb);
+	usb_serial_generic_close(port);
 
 	mutex_lock(&port->serial->disc_mutex);
 	if (!port->serial->disconnected)
@@ -807,17 +787,6 @@ static int cp210x_startup(struct usb_serial *serial)
 	return 0;
 }
 
-static void cp210x_disconnect(struct usb_serial *serial)
-{
-	int i;
-
-	dbg("%s", __func__);
-
-	/* Stop reads and writes on all ports */
-	for (i = 0; i < serial->num_ports; ++i)
-		cp210x_cleanup(serial->port[i]);
-}
-
 static int __init cp210x_init(void)
 {
 	int retval;
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index e23c77925e7..f5d06746cc3 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -64,6 +64,7 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include <linux/serial.h>
+#include <linux/kfifo.h>
 #include <linux/delay.h>
 #include <linux/uaccess.h>
 #include <asm/unaligned.h>
@@ -79,13 +80,12 @@ static int unstable_bauds;
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.09"
+#define DRIVER_VERSION "v1.10"
 #define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
 #define DRIVER_DESC "Cypress USB to Serial Driver"
 
 /* write buffer size defines */
 #define CYPRESS_BUF_SIZE	1024
-#define CYPRESS_CLOSING_WAIT	(30*HZ)
 
 static const struct usb_device_id id_table_earthmate[] = {
 	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
@@ -135,7 +135,7 @@ struct cypress_private {
 	int bytes_out;			   /* used for statistics */
 	int cmd_count;			   /* used for statistics */
 	int cmd_ctrl;			   /* always set this to 1 before issuing a command */
-	struct cypress_buf *buf;	   /* write buffer */
+	struct kfifo write_fifo;	   /* write fifo */
 	int write_urb_in_use;		   /* write urb in use indicator */
 	int write_urb_interval;            /* interval to use for write urb */
 	int read_urb_interval;             /* interval to use for read urb */
@@ -157,14 +157,6 @@ struct cypress_private {
 	struct ktermios tmp_termios; 	   /* stores the old termios settings */
 };
 
-/* write buffer structure */
-struct cypress_buf {
-	unsigned int	buf_size;
-	char		*buf_buf;
-	char		*buf_get;
-	char		*buf_put;
-};
-
 /* function prototypes for the Cypress USB to serial device */
 static int  cypress_earthmate_startup(struct usb_serial *serial);
 static int  cypress_hidcom_startup(struct usb_serial *serial);
@@ -190,17 +182,6 @@ static void cypress_unthrottle(struct tty_struct *tty);
 static void cypress_set_dead(struct usb_serial_port *port);
 static void cypress_read_int_callback(struct urb *urb);
 static void cypress_write_int_callback(struct urb *urb);
-/* write buffer functions */
-static struct cypress_buf *cypress_buf_alloc(unsigned int size);
-static void cypress_buf_free(struct cypress_buf *cb);
-static void cypress_buf_clear(struct cypress_buf *cb);
-static unsigned int cypress_buf_data_avail(struct cypress_buf *cb);
-static unsigned int cypress_buf_space_avail(struct cypress_buf *cb);
-static unsigned int cypress_buf_put(struct cypress_buf *cb,
-					const char *buf, unsigned int count);
-static unsigned int cypress_buf_get(struct cypress_buf *cb,
-					char *buf, unsigned int count);
-
 
 static struct usb_serial_driver cypress_earthmate_device = {
 	.driver = {
@@ -503,8 +484,7 @@ static int generic_startup(struct usb_serial *serial)
 
 	priv->comm_is_ok = !0;
 	spin_lock_init(&priv->lock);
-	priv->buf = cypress_buf_alloc(CYPRESS_BUF_SIZE);
-	if (priv->buf == NULL) {
+	if (kfifo_alloc(&priv->write_fifo, CYPRESS_BUF_SIZE, GFP_KERNEL)) {
 		kfree(priv);
 		return -ENOMEM;
 	}
@@ -627,7 +607,7 @@ static void cypress_release(struct usb_serial *serial)
 	priv = usb_get_serial_port_data(serial->port[0]);
 
 	if (priv) {
-		cypress_buf_free(priv->buf);
+		kfifo_free(&priv->write_fifo);
 		kfree(priv);
 	}
 }
@@ -704,6 +684,7 @@ static void cypress_dtr_rts(struct usb_serial_port *port, int on)
 static void cypress_close(struct usb_serial_port *port)
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -713,12 +694,14 @@ static void cypress_close(struct usb_serial_port *port)
 		mutex_unlock(&port->serial->disc_mutex);
 		return;
 	}
-	cypress_buf_clear(priv->buf);
+	spin_lock_irqsave(&priv->lock, flags);
+	kfifo_reset_out(&priv->write_fifo);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
 	dbg("%s - stopping urbs", __func__);
 	usb_kill_urb(port->interrupt_in_urb);
 	usb_kill_urb(port->interrupt_out_urb);
 
-
 	if (stats)
 		dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
 			priv->bytes_in, priv->bytes_out, priv->cmd_count);
@@ -730,7 +713,6 @@ static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count)
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
 
 	dbg("%s - port %d, %d bytes", __func__, port->number, count);
 
@@ -745,9 +727,7 @@ static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
 	if (!count)
 		return count;
 
-	spin_lock_irqsave(&priv->lock, flags);
-	count = cypress_buf_put(priv->buf, buf, count);
-	spin_unlock_irqrestore(&priv->lock, flags);
+	count = kfifo_in_locked(&priv->write_fifo, buf, count, &priv->lock);
 
 finish:
 	cypress_send(port);
@@ -807,9 +787,10 @@ static void cypress_send(struct usb_serial_port *port)
 	} else
 		spin_unlock_irqrestore(&priv->lock, flags);
 
-	count = cypress_buf_get(priv->buf, &port->interrupt_out_buffer[offset],
-				port->interrupt_out_size-offset);
-
+	count = kfifo_out_locked(&priv->write_fifo,
+					&port->interrupt_out_buffer[offset],
+					port->interrupt_out_size - offset,
+					&priv->lock);
 	if (count == 0)
 		return;
 
@@ -875,7 +856,7 @@ static int cypress_write_room(struct tty_struct *tty)
 	dbg("%s - port %d", __func__, port->number);
 
 	spin_lock_irqsave(&priv->lock, flags);
-	room = cypress_buf_space_avail(priv->buf);
+	room = kfifo_avail(&priv->write_fifo);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	dbg("%s - returns %d", __func__, room);
@@ -1143,7 +1124,7 @@ static int cypress_chars_in_buffer(struct tty_struct *tty)
 	dbg("%s - port %d", __func__, port->number);
 
 	spin_lock_irqsave(&priv->lock, flags);
-	chars = cypress_buf_data_avail(priv->buf);
+	chars = kfifo_len(&priv->write_fifo);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	dbg("%s - returns %d", __func__, chars);
@@ -1309,7 +1290,7 @@ static void cypress_read_int_callback(struct urb *urb)
 	/* process read if there is data other than line status */
 	if (tty && bytes > i) {
 		tty_insert_flip_string_fixed_flag(tty, data + i,
-				bytes - i, tty_flag);
+				tty_flag, bytes - i);
 		tty_flip_buffer_push(tty);
 	}
 
@@ -1397,193 +1378,6 @@ static void cypress_write_int_callback(struct urb *urb)
 
 
 /*****************************************************************************
- * Write buffer functions - buffering code from pl2303 used
- *****************************************************************************/
-
-/*
- * cypress_buf_alloc
- *
- * Allocate a circular buffer and all associated memory.
- */
-
-static struct cypress_buf *cypress_buf_alloc(unsigned int size)
-{
-
-	struct cypress_buf *cb;
-
-
-	if (size == 0)
-		return NULL;
-
-	cb = kmalloc(sizeof(struct cypress_buf), GFP_KERNEL);
-	if (cb == NULL)
-		return NULL;
-
-	cb->buf_buf = kmalloc(size, GFP_KERNEL);
-	if (cb->buf_buf == NULL) {
-		kfree(cb);
-		return NULL;
-	}
-
-	cb->buf_size = size;
-	cb->buf_get = cb->buf_put = cb->buf_buf;
-
-	return cb;
-
-}
-
-
-/*
- * cypress_buf_free
- *
- * Free the buffer and all associated memory.
- */
-
-static void cypress_buf_free(struct cypress_buf *cb)
-{
-	if (cb) {
-		kfree(cb->buf_buf);
-		kfree(cb);
-	}
-}
-
-
-/*
- * cypress_buf_clear
- *
- * Clear out all data in the circular buffer.
- */
-
-static void cypress_buf_clear(struct cypress_buf *cb)
-{
-	if (cb != NULL)
-		cb->buf_get = cb->buf_put;
-		/* equivalent to a get of all data available */
-}
-
-
-/*
- * cypress_buf_data_avail
- *
- * Return the number of bytes of data available in the circular
- * buffer.
- */
-
-static unsigned int cypress_buf_data_avail(struct cypress_buf *cb)
-{
-	if (cb != NULL)
-		return (cb->buf_size + cb->buf_put - cb->buf_get)
-							% cb->buf_size;
-	else
-		return 0;
-}
-
-
-/*
- * cypress_buf_space_avail
- *
- * Return the number of bytes of space available in the circular
- * buffer.
- */
-
-static unsigned int cypress_buf_space_avail(struct cypress_buf *cb)
-{
-	if (cb != NULL)
-		return (cb->buf_size + cb->buf_get - cb->buf_put - 1)
-							% cb->buf_size;
-	else
-		return 0;
-}
-
-
-/*
- * cypress_buf_put
- *
- * Copy data data from a user buffer and put it into the circular buffer.
- * Restrict to the amount of space available.
- *
- * Return the number of bytes copied.
- */
-
-static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf,
-	unsigned int count)
-{
-
-	unsigned int len;
-
-
-	if (cb == NULL)
-		return 0;
-
-	len  = cypress_buf_space_avail(cb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = cb->buf_buf + cb->buf_size - cb->buf_put;
-	if (count > len) {
-		memcpy(cb->buf_put, buf, len);
-		memcpy(cb->buf_buf, buf+len, count - len);
-		cb->buf_put = cb->buf_buf + count - len;
-	} else {
-		memcpy(cb->buf_put, buf, count);
-		if (count < len)
-			cb->buf_put += count;
-		else /* count == len */
-			cb->buf_put = cb->buf_buf;
-	}
-
-	return count;
-
-}
-
-
-/*
- * cypress_buf_get
- *
- * Get data from the circular buffer and copy to the given buffer.
- * Restrict to the amount of data available.
- *
- * Return the number of bytes copied.
- */
-
-static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf,
-	unsigned int count)
-{
-
-	unsigned int len;
-
-
-	if (cb == NULL)
-		return 0;
-
-	len = cypress_buf_data_avail(cb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = cb->buf_buf + cb->buf_size - cb->buf_get;
-	if (count > len) {
-		memcpy(buf, cb->buf_get, len);
-		memcpy(buf+len, cb->buf_buf, count - len);
-		cb->buf_get = cb->buf_buf + count - len;
-	} else {
-		memcpy(buf, cb->buf_get, count);
-		if (count < len)
-			cb->buf_get += count;
-		else /* count == len */
-			cb->buf_get = cb->buf_buf;
-	}
-
-	return count;
-
-}
-
-/*****************************************************************************
  * Module functions
  *****************************************************************************/
 
diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h
index 1fd360e0406..67cf6082688 100644
--- a/drivers/usb/serial/cypress_m8.h
+++ b/drivers/usb/serial/cypress_m8.h
@@ -1,27 +1,32 @@
 #ifndef CYPRESS_M8_H
 #define CYPRESS_M8_H
 
-/* definitions and function prototypes used for the cypress USB to Serial controller */
+/*
+ * definitions and function prototypes used for the cypress USB to Serial
+ * controller
+ */
 
-/* For sending our feature buffer - controlling serial communication states */
-/* Linux HID has no support for serial devices so we do this through the driver */
-#define HID_REQ_GET_REPORT 0x01
-#define HID_REQ_SET_REPORT 0x09
+/*
+ * For sending our feature buffer - controlling serial communication states.
+ * Linux HID has no support for serial devices so we do this through the driver
+ */
+#define HID_REQ_GET_REPORT	0x01
+#define HID_REQ_SET_REPORT	0x09
 
 /* List other cypress USB to Serial devices here, and add them to the id_table */
 
 /* DeLorme Earthmate USB - a GPS device */
-#define	VENDOR_ID_DELORME		 0x1163
-#define PRODUCT_ID_EARTHMATEUSB		 0x0100
-#define PRODUCT_ID_EARTHMATEUSB_LT20	 0x0200
+#define VENDOR_ID_DELORME		0x1163
+#define PRODUCT_ID_EARTHMATEUSB		0x0100
+#define PRODUCT_ID_EARTHMATEUSB_LT20	0x0200
 
 /* Cypress HID->COM RS232 Adapter */
-#define VENDOR_ID_CYPRESS		 0x04b4
-#define PRODUCT_ID_CYPHIDCOM		 0x5500
+#define VENDOR_ID_CYPRESS		0x04b4
+#define PRODUCT_ID_CYPHIDCOM		0x5500
 
 /* Powercom UPS, chip CY7C63723 */
-#define VENDOR_ID_POWERCOM		 0x0d9f
-#define PRODUCT_ID_UPS			 0x0002
+#define VENDOR_ID_POWERCOM		0x0d9f
+#define PRODUCT_ID_UPS			0x0002
 
 /* Nokia CA-42 USB to serial cable */
 #define VENDOR_ID_DAZZLE		0x07d0
@@ -29,17 +34,17 @@
 /* End of device listing */
 
 /* Used for setting / requesting serial line settings */
-#define CYPRESS_SET_CONFIG 0x01
-#define CYPRESS_GET_CONFIG 0x02
+#define CYPRESS_SET_CONFIG	0x01
+#define CYPRESS_GET_CONFIG	0x02
 
 /* Used for throttle control */
-#define THROTTLED 0x1
-#define ACTUALLY_THROTTLED 0x2
+#define THROTTLED		0x1
+#define ACTUALLY_THROTTLED	0x2
 
-/* chiptypes - used in case firmware differs from the generic form ... offering
- * 	different baud speeds/etc.
+/*
+ * chiptypes - used in case firmware differs from the generic form ... offering
+ * different baud speeds/etc.
  */
-
 #define CT_EARTHMATE	0x01
 #define CT_CYPHIDCOM	0x02
 #define CT_CA42V2	0x03
@@ -50,15 +55,15 @@
 /* these are sent / read at byte 0 of the input/output hid reports */
 /* You can find these values defined in the CY4601 USB to Serial design notes */
 
-#define CONTROL_DTR 	0x20	/* data terminal ready - flow control - host to device */
+#define CONTROL_DTR	0x20	/* data terminal ready - flow control - host to device */
 #define UART_DSR	0x20	/* data set ready - flow control - device to host */
-#define CONTROL_RTS 	0x10	/* request to send - flow control - host to device */
+#define CONTROL_RTS	0x10	/* request to send - flow control - host to device */
 #define UART_CTS	0x10	/* clear to send - flow control - device to host */
-#define	UART_RI		0x10	/* ring indicator - modem - device to host */
+#define UART_RI		0x10	/* ring indicator - modem - device to host */
 #define UART_CD		0x40	/* carrier detect - modem - device to host */
-#define CYP_ERROR 	0x08	/* received from input report - device to host */
+#define CYP_ERROR	0x08	/* received from input report - device to host */
 /* Note - the below has nothing to do with the "feature report" reset */
-#define CONTROL_RESET	0x08  	/* sent with output report - host to device */
+#define CONTROL_RESET	0x08	/* sent with output report - host to device */
 
 /* End of RS-232 protocol definitions */
 
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 68b0aa5e516..3edda3ed822 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -1703,8 +1703,8 @@ static int digi_read_inb_callback(struct urb *urb)
 		/* data length is len-1 (one byte of len is port_status) */
 		--len;
 		if (len > 0) {
-			tty_insert_flip_string_fixed_flag(tty, data, len,
-									flag);
+			tty_insert_flip_string_fixed_flag(tty, data, flag,
+									len);
 			tty_flip_buffer_push(tty);
 		}
 	}
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 5f740a1eaca..504b5585ea4 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -13,44 +13,6 @@
  *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
- *
- * (07/16/2001) gb
- *	remove unused code in empeg_close() (thanks to Oliver Neukum for
- *	pointing this out) and rewrote empeg_set_termios().
- *
- * (05/30/2001) gkh
- *	switched from using spinlock to a semaphore, which fixes lots of
- * problems.
- *
- * (04/08/2001) gb
- *      Identify version on module load.
- *
- * (01/22/2001) gb
- *	Added write_room() and chars_in_buffer() support.
- *
- * (12/21/2000) gb
- *	Moved termio stuff inside the port->active check.
- *	Moved MOD_DEC_USE_COUNT to end of empeg_close().
- *
- * (12/03/2000) gb
- *	Added tty->ldisc.set_termios(port, tty, NULL) to empeg_open().
- *	This notifies the tty driver that the termios have changed.
- *
- * (11/13/2000) gb
- *	Moved tty->low_latency = 1 from empeg_read_bulk_callback() to
- *	empeg_open() (It only needs to be set once - Doh!)
- *
- * (11/11/2000) gb
- *	Updated to work with id_table structure.
- *
- * (11/04/2000) gb
- *	Forked this from visor.c, and hacked it up to work with an
- *	Empeg ltd. empeg-car player.  Constructive criticism welcomed.
- *	I would like to say, 'Thank You' to Greg Kroah-Hartman for the
- *	use of his code, and for his guidance, advice and patience. :)
- *	A 'Thank You' is in order for John Ripley of Empeg ltd for his
- *	advice, and patience too.
- *
  */
 
 #include <linux/kernel.h>
@@ -71,7 +33,7 @@ static int debug;
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.2"
+#define DRIVER_VERSION "v1.3"
 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Gary Brubaker <xavyer@ix.netcom.com>"
 #define DRIVER_DESC "USB Empeg Mark I/II Driver"
 
@@ -79,19 +41,8 @@ static int debug;
 #define EMPEG_PRODUCT_ID		0x0001
 
 /* function prototypes for an empeg-car player */
-static int  empeg_open(struct tty_struct *tty, struct usb_serial_port *port);
-static void empeg_close(struct usb_serial_port *port);
-static int  empeg_write(struct tty_struct *tty, struct usb_serial_port *port,
-						const unsigned char *buf,
-						int count);
-static int  empeg_write_room(struct tty_struct *tty);
-static int  empeg_chars_in_buffer(struct tty_struct *tty);
-static void empeg_throttle(struct tty_struct *tty);
-static void empeg_unthrottle(struct tty_struct *tty);
 static int  empeg_startup(struct usb_serial *serial);
 static void empeg_init_termios(struct tty_struct *tty);
-static void empeg_write_bulk_callback(struct urb *urb);
-static void empeg_read_bulk_callback(struct urb *urb);
 
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(EMPEG_VENDOR_ID, EMPEG_PRODUCT_ID) },
@@ -105,7 +56,7 @@ static struct usb_driver empeg_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id = 	1,
+	.no_dynamic_id =	1,
 };
 
 static struct usb_serial_driver empeg_device = {
@@ -114,291 +65,16 @@ static struct usb_serial_driver empeg_device = {
 		.name =		"empeg",
 	},
 	.id_table =		id_table,
-	.usb_driver = 		&empeg_driver,
+	.usb_driver =		&empeg_driver,
 	.num_ports =		1,
-	.open =			empeg_open,
-	.close =		empeg_close,
-	.throttle =		empeg_throttle,
-	.unthrottle =		empeg_unthrottle,
+	.bulk_out_size =	256,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
 	.attach =		empeg_startup,
 	.init_termios =		empeg_init_termios,
-	.write =		empeg_write,
-	.write_room =		empeg_write_room,
-	.chars_in_buffer =	empeg_chars_in_buffer,
-	.write_bulk_callback =	empeg_write_bulk_callback,
-	.read_bulk_callback =	empeg_read_bulk_callback,
 };
 
-#define NUM_URBS			16
-#define URB_TRANSFER_BUFFER_SIZE	4096
-
-static struct urb	*write_urb_pool[NUM_URBS];
-static spinlock_t	write_urb_pool_lock;
-static int		bytes_in;
-static int		bytes_out;
-
-/******************************************************************************
- * Empeg specific driver functions
- ******************************************************************************/
-static int empeg_open(struct tty_struct *tty,struct usb_serial_port *port)
-{
-	struct usb_serial *serial = port->serial;
-	int result = 0;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	bytes_in = 0;
-	bytes_out = 0;
-
-	/* Start reading from the device */
-	usb_fill_bulk_urb(
-		port->read_urb,
-		serial->dev,
-		usb_rcvbulkpipe(serial->dev,
-			port->bulk_in_endpointAddress),
-		port->read_urb->transfer_buffer,
-		port->read_urb->transfer_buffer_length,
-		empeg_read_bulk_callback,
-		port);
-
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-							__func__, result);
-
-	return result;
-}
-
-
-static void empeg_close(struct usb_serial_port *port)
-{
-	dbg("%s - port %d", __func__, port->number);
-
-	/* shutdown our bulk read */
-	usb_kill_urb(port->read_urb);
-	/* Uncomment the following line if you want to see some statistics in your syslog */
-	/* dev_info (&port->dev, "Bytes In = %d  Bytes Out = %d\n", bytes_in, bytes_out); */
-}
-
-
-static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port,
-					const unsigned char *buf, int count)
-{
-	struct usb_serial *serial = port->serial;
-	struct urb *urb;
-	const unsigned char *current_position = buf;
-	unsigned long flags;
-	int status;
-	int i;
-	int bytes_sent = 0;
-	int transfer_size;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	while (count > 0) {
-		/* try to find a free urb in our list of them */
-		urb = NULL;
-
-		spin_lock_irqsave(&write_urb_pool_lock, flags);
-
-		for (i = 0; i < NUM_URBS; ++i) {
-			if (write_urb_pool[i]->status != -EINPROGRESS) {
-				urb = write_urb_pool[i];
-				break;
-			}
-		}
-
-		spin_unlock_irqrestore(&write_urb_pool_lock, flags);
-
-		if (urb == NULL) {
-			dbg("%s - no more free urbs", __func__);
-			goto exit;
-		}
-
-		if (urb->transfer_buffer == NULL) {
-			urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
-			if (urb->transfer_buffer == NULL) {
-				dev_err(&port->dev,
-					"%s no more kernel memory...\n",
-								__func__);
-				goto exit;
-			}
-		}
-
-		transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
-
-		memcpy(urb->transfer_buffer, current_position, transfer_size);
-
-		usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, urb->transfer_buffer);
-
-		/* build up our urb */
-		usb_fill_bulk_urb(
-			urb,
-			serial->dev,
-			usb_sndbulkpipe(serial->dev,
-					port->bulk_out_endpointAddress),
-			urb->transfer_buffer,
-			transfer_size,
-			empeg_write_bulk_callback,
-			port);
-
-		/* send it down the pipe */
-		status = usb_submit_urb(urb, GFP_ATOMIC);
-		if (status) {
-			dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed with status = %d\n", __func__, status);
-			bytes_sent = status;
-			break;
-		}
-
-		current_position += transfer_size;
-		bytes_sent += transfer_size;
-		count -= transfer_size;
-		bytes_out += transfer_size;
-
-	}
-exit:
-	return bytes_sent;
-}
-
-
-static int empeg_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	unsigned long flags;
-	int i;
-	int room = 0;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&write_urb_pool_lock, flags);
-	/* tally up the number of bytes available */
-	for (i = 0; i < NUM_URBS; ++i) {
-		if (write_urb_pool[i]->status != -EINPROGRESS)
-			room += URB_TRANSFER_BUFFER_SIZE;
-	}
-	spin_unlock_irqrestore(&write_urb_pool_lock, flags);
-	dbg("%s - returns %d", __func__, room);
-	return room;
-
-}
-
-
-static int empeg_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	unsigned long flags;
-	int i;
-	int chars = 0;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&write_urb_pool_lock, flags);
-
-	/* tally up the number of bytes waiting */
-	for (i = 0; i < NUM_URBS; ++i) {
-		if (write_urb_pool[i]->status == -EINPROGRESS)
-			chars += URB_TRANSFER_BUFFER_SIZE;
-	}
-
-	spin_unlock_irqrestore(&write_urb_pool_lock, flags);
-	dbg("%s - returns %d", __func__, chars);
-	return chars;
-}
-
-
-static void empeg_write_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status) {
-		dbg("%s - nonzero write bulk status received: %d",
-		    __func__, status);
-		return;
-	}
-
-	usb_serial_port_softint(port);
-}
-
-
-static void empeg_read_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	struct tty_struct *tty;
-	unsigned char *data = urb->transfer_buffer;
-	int result;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status) {
-		dbg("%s - nonzero read bulk status received: %d",
-		    __func__, status);
-		return;
-	}
-
-	usb_serial_debug_data(debug, &port->dev, __func__,
-						urb->actual_length, data);
-	tty = tty_port_tty_get(&port->port);
-
-	if (urb->actual_length) {
-		tty_insert_flip_string(tty, data, urb->actual_length);
-		tty_flip_buffer_push(tty);
-		bytes_in += urb->actual_length;
-	}
-	tty_kref_put(tty);
-
-	/* Continue trying to always read  */
-	usb_fill_bulk_urb(
-		port->read_urb,
-		port->serial->dev,
-		usb_rcvbulkpipe(port->serial->dev,
-			port->bulk_in_endpointAddress),
-		port->read_urb->transfer_buffer,
-		port->read_urb->transfer_buffer_length,
-		empeg_read_bulk_callback,
-		port);
-
-	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-
-	if (result)
-		dev_err(&urb->dev->dev,
-			"%s - failed resubmitting read urb, error %d\n",
-							__func__, result);
-
-	return;
-
-}
-
-
-static void empeg_throttle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	dbg("%s - port %d", __func__, port->number);
-	usb_kill_urb(port->read_urb);
-}
-
-
-static void empeg_unthrottle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	int result;
-	dbg("%s - port %d", __func__, port->number);
-
-	port->read_urb->dev = port->serial->dev;
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-							__func__, result);
-}
-
-
-static int  empeg_startup(struct usb_serial *serial)
+static int empeg_startup(struct usb_serial *serial)
 {
 	int r;
 
@@ -414,10 +90,8 @@ static int  empeg_startup(struct usb_serial *serial)
 
 	/* continue on with initialization */
 	return r;
-
 }
 
-
 static void empeg_init_termios(struct tty_struct *tty)
 {
 	struct ktermios *termios = tty->termios;
@@ -462,77 +136,28 @@ static void empeg_init_termios(struct tty_struct *tty)
 	tty_encode_baud_rate(tty, 115200, 115200);
 }
 
-
 static int __init empeg_init(void)
 {
-	struct urb *urb;
-	int i, retval;
-
-	/* create our write urb pool and transfer buffers */
-	spin_lock_init(&write_urb_pool_lock);
-	for (i = 0; i < NUM_URBS; ++i) {
-		urb = usb_alloc_urb(0, GFP_KERNEL);
-		write_urb_pool[i] = urb;
-		if (urb == NULL) {
-			printk(KERN_ERR "empeg: No more urbs???\n");
-			continue;
-		}
-
-		urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
-								GFP_KERNEL);
-		if (!urb->transfer_buffer) {
-			printk(KERN_ERR "empeg: %s - out of memory for urb "
-			       "buffers.", __func__);
-			continue;
-		}
-	}
+	int retval;
 
 	retval = usb_serial_register(&empeg_device);
 	if (retval)
-		goto failed_usb_serial_register;
+		return retval;
 	retval = usb_register(&empeg_driver);
-	if (retval)
-		goto failed_usb_register;
-
+	if (retval) {
+		usb_serial_deregister(&empeg_device);
+		return retval;
+	}
 	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
 	       DRIVER_DESC "\n");
 
 	return 0;
-failed_usb_register:
-	usb_serial_deregister(&empeg_device);
-failed_usb_serial_register:
-	for (i = 0; i < NUM_URBS; ++i) {
-		if (write_urb_pool[i]) {
-			kfree(write_urb_pool[i]->transfer_buffer);
-			usb_free_urb(write_urb_pool[i]);
-		}
-	}
-	return retval;
 }
 
-
 static void __exit empeg_exit(void)
 {
-	int i;
-	unsigned long flags;
-
 	usb_deregister(&empeg_driver);
 	usb_serial_deregister(&empeg_device);
-
-	spin_lock_irqsave(&write_urb_pool_lock, flags);
-
-	for (i = 0; i < NUM_URBS; ++i) {
-		if (write_urb_pool[i]) {
-			/* FIXME - uncomment the following usb_kill_urb call
-			 * when the host controllers get fixed to set urb->dev
-			 * = NULL after the urb is finished.  Otherwise this
-			 * call oopses. */
-			/* usb_kill_urb(write_urb_pool[i]); */
-			kfree(write_urb_pool[i]->transfer_buffer);
-			usb_free_urb(write_urb_pool[i]);
-		}
-	}
-	spin_unlock_irqrestore(&write_urb_pool_lock, flags);
 }
 
 
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 1d7c4fac02e..050211afc07 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1,6 +1,8 @@
 /*
  * USB FTDI SIO driver
  *
+ *	Copyright (C) 2009 - 2010
+ *	    Johan Hovold (jhovold@gmail.com)
  *	Copyright (C) 1999 - 2001
  *	    Greg Kroah-Hartman (greg@kroah.com)
  *          Bill Ryder (bryder@sgi.com)
@@ -49,8 +51,8 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.5.0"
-#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr"
+#define DRIVER_VERSION "v1.6.0"
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr, Johan Hovold <jhovold@gmail.com>"
 #define DRIVER_DESC "USB FTDI Serial Converters Driver"
 
 static int debug;
@@ -59,7 +61,7 @@ static __u16 product;
 
 struct ftdi_private {
 	struct kref kref;
-	ftdi_chip_type_t chip_type;
+	enum ftdi_chip_type chip_type;
 				/* type of device, either SIO or FT8U232AM */
 	int baud_base;		/* baud base clock for divisor setting */
 	int custom_divisor;	/* custom_divisor kludge, this is for
@@ -69,10 +71,6 @@ struct ftdi_private {
 				/* the last data state set - needed for doing
 				 * a break
 				 */
-	int write_offset;       /* This is the offset in the usb data block to
-				 * write the serial data - it varies between
-				 * devices
-				 */
 	int flags;		/* some ASYNC_xxxx flags are supported */
 	unsigned long last_dtr_rts;	/* saved modem control outputs */
 	wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
@@ -87,9 +85,6 @@ struct ftdi_private {
 				   be enabled */
 
 	unsigned int latency;		/* latency setting in use */
-	spinlock_t tx_lock;	/* spinlock for transmit state */
-	unsigned long tx_outstanding_bytes;
-	unsigned long tx_outstanding_urbs;
 	unsigned short max_packet_size;
 	struct mutex cfg_lock; /* Avoid mess by parallel calls of config ioctl() and change_speed() */
 };
@@ -768,9 +763,6 @@ static const char *ftdi_chip_name[] = {
 };
 
 
-/* Constants for read urb and write urb */
-#define BUFSZ 512
-
 /* Used for TIOCMIWAIT */
 #define FTDI_STATUS_B0_MASK	(FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD)
 #define FTDI_STATUS_B1_MASK	(FTDI_RS_BI)
@@ -787,13 +779,9 @@ static int  ftdi_sio_port_remove(struct usb_serial_port *port);
 static int  ftdi_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void ftdi_close(struct usb_serial_port *port);
 static void ftdi_dtr_rts(struct usb_serial_port *port, int on);
-static int  ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
-			const unsigned char *buf, int count);
-static int  ftdi_write_room(struct tty_struct *tty);
-static int  ftdi_chars_in_buffer(struct tty_struct *tty);
-static void ftdi_write_bulk_callback(struct urb *urb);
-static void ftdi_read_bulk_callback(struct urb *urb);
-static void ftdi_process_read(struct usb_serial_port *port);
+static void ftdi_process_read_urb(struct urb *urb);
+static int ftdi_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size);
 static void ftdi_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
 static int  ftdi_tiocmget(struct tty_struct *tty, struct file *file);
@@ -802,8 +790,6 @@ static int  ftdi_tiocmset(struct tty_struct *tty, struct file *file,
 static int  ftdi_ioctl(struct tty_struct *tty, struct file *file,
 			unsigned int cmd, unsigned long arg);
 static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
-static void ftdi_throttle(struct tty_struct *tty);
-static void ftdi_unthrottle(struct tty_struct *tty);
 
 static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
 static unsigned short int ftdi_232am_baud_to_divisor(int baud);
@@ -821,19 +807,18 @@ static struct usb_serial_driver ftdi_sio_device = {
 	.usb_driver = 		&ftdi_driver,
 	.id_table =		id_table_combined,
 	.num_ports =		1,
+	.bulk_in_size =		512,
+	.bulk_out_size =	256,
 	.probe =		ftdi_sio_probe,
 	.port_probe =		ftdi_sio_port_probe,
 	.port_remove =		ftdi_sio_port_remove,
 	.open =			ftdi_open,
 	.close =		ftdi_close,
 	.dtr_rts =		ftdi_dtr_rts,
-	.throttle =		ftdi_throttle,
-	.unthrottle =		ftdi_unthrottle,
-	.write =		ftdi_write,
-	.write_room =		ftdi_write_room,
-	.chars_in_buffer =	ftdi_chars_in_buffer,
-	.read_bulk_callback =	ftdi_read_bulk_callback,
-	.write_bulk_callback =	ftdi_write_bulk_callback,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
+	.process_read_urb =	ftdi_process_read_urb,
+	.prepare_write_buffer =	ftdi_prepare_write_buffer,
 	.tiocmget =		ftdi_tiocmget,
 	.tiocmset =		ftdi_tiocmset,
 	.ioctl =		ftdi_ioctl,
@@ -849,9 +834,6 @@ static struct usb_serial_driver ftdi_sio_device = {
 #define HIGH 1
 #define LOW 0
 
-/* number of outstanding urbs to prevent userspace DoS from happening */
-#define URB_UPPER_LIMIT	42
-
 /*
  * ***************************************************************************
  * Utility functions
@@ -987,7 +969,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set,
 
 static __u32 get_ftdi_divisor(struct tty_struct *tty,
 						struct usb_serial_port *port)
-{ /* get_ftdi_divisor */
+{
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	__u32 div_value = 0;
 	int div_okay = 1;
@@ -1211,12 +1193,11 @@ static int get_serial_info(struct usb_serial_port *port,
 	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
 		return -EFAULT;
 	return 0;
-} /* get_serial_info */
-
+}
 
 static int set_serial_info(struct tty_struct *tty,
 	struct usb_serial_port *port, struct serial_struct __user *newinfo)
-{ /* set_serial_info */
+{
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	struct serial_struct new_serial;
 	struct ftdi_private old_priv;
@@ -1279,8 +1260,7 @@ check_and_exit:
 	else
 		mutex_unlock(&priv->cfg_lock);
 	return 0;
-
-} /* set_serial_info */
+}
 
 
 /* Determine type of FTDI chip based on USB config and descriptor. */
@@ -1294,7 +1274,6 @@ static void ftdi_determine_type(struct usb_serial_port *port)
 
 	/* Assume it is not the original SIO device for now. */
 	priv->baud_base = 48000000 / 2;
-	priv->write_offset = 0;
 
 	version = le16_to_cpu(udev->descriptor.bcdDevice);
 	interfaces = udev->actconfig->desc.bNumInterfaces;
@@ -1336,7 +1315,6 @@ static void ftdi_determine_type(struct usb_serial_port *port)
 		/* Old device.  Assume it's the original SIO. */
 		priv->chip_type = SIO;
 		priv->baud_base = 12000000 / 16;
-		priv->write_offset = 1;
 	} else if (version < 0x400) {
 		/* Assume it's an FT8U232AM (or FT8U245AM) */
 		/* (It might be a BM because of the iSerialNumber bug,
@@ -1543,7 +1521,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 	}
 
 	kref_init(&priv->kref);
-	spin_lock_init(&priv->tx_lock);
 	mutex_init(&priv->cfg_lock);
 	init_waitqueue_head(&priv->delta_msr_wait);
 
@@ -1552,28 +1529,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 	if (quirk && quirk->port_probe)
 		quirk->port_probe(priv);
 
-	/* Increase the size of read buffers */
-	kfree(port->bulk_in_buffer);
-	port->bulk_in_buffer = kmalloc(BUFSZ, GFP_KERNEL);
-	if (!port->bulk_in_buffer) {
-		kfree(priv);
-		return -ENOMEM;
-	}
-	if (port->read_urb) {
-		port->read_urb->transfer_buffer = port->bulk_in_buffer;
-		port->read_urb->transfer_buffer_length = BUFSZ;
-	}
-
 	priv->port = port;
-
-	/* Free port's existing write urb and transfer buffer. */
-	if (port->write_urb) {
-		usb_free_urb(port->write_urb);
-		port->write_urb = NULL;
-	}
-	kfree(port->bulk_out_buffer);
-	port->bulk_out_buffer = NULL;
-
 	usb_set_serial_port_data(port, priv);
 
 	ftdi_determine_type(port);
@@ -1594,7 +1550,7 @@ static void ftdi_USB_UIRT_setup(struct ftdi_private *priv)
 	priv->flags |= ASYNC_SPD_CUST;
 	priv->custom_divisor = 77;
 	priv->force_baud = 38400;
-} /* ftdi_USB_UIRT_setup */
+}
 
 /* Setup for the HE-TIRA1 device, which requires hardwired
  * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled.  */
@@ -1607,7 +1563,7 @@ static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv)
 	priv->custom_divisor = 240;
 	priv->force_baud = 38400;
 	priv->force_rtscts = 1;
-} /* ftdi_HE_TIRA1_setup */
+}
 
 /*
  * Module parameter to control latency timer for NDI FTDI-based USB devices.
@@ -1700,31 +1656,10 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
 	return 0;
 }
 
-static int ftdi_submit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
-{
-	struct urb *urb = port->read_urb;
-	struct usb_serial *serial = port->serial;
-	int result;
-
-	usb_fill_bulk_urb(urb, serial->dev,
-			   usb_rcvbulkpipe(serial->dev,
-					port->bulk_in_endpointAddress),
-			   urb->transfer_buffer,
-			   urb->transfer_buffer_length,
-			   ftdi_read_bulk_callback, port);
-	result = usb_submit_urb(urb, mem_flags);
-	if (result && result != -EPERM)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-							__func__, result);
-	return result;
-}
-
 static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
-{ /* ftdi_open */
+{
 	struct usb_device *dev = port->serial->dev;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
 	int result;
 
 	dbg("%s", __func__);
@@ -1746,20 +1681,13 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (tty)
 		ftdi_set_termios(tty, port, tty->termios);
 
-	/* Not throttled */
-	spin_lock_irqsave(&port->lock, flags);
-	port->throttled = 0;
-	port->throttle_req = 0;
-	spin_unlock_irqrestore(&port->lock, flags);
-
 	/* Start reading from the device */
-	result = ftdi_submit_read_urb(port, GFP_KERNEL);
+	result = usb_serial_generic_open(tty, port);
 	if (!result)
 		kref_get(&priv->kref);
 
 	return result;
-} /* ftdi_open */
-
+}
 
 static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
 {
@@ -1789,22 +1717,16 @@ static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
  * usbserial:__serial_close  only calls ftdi_close if the point is open
  *
  *   This only gets called when it is the last close
- *
- *
  */
-
 static void ftdi_close(struct usb_serial_port *port)
-{ /* ftdi_close */
+{
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 
 	dbg("%s", __func__);
 
-	/* shutdown our bulk read */
-	usb_kill_urb(port->read_urb);
+	usb_serial_generic_close(port);
 	kref_put(&priv->kref, ftdi_sio_priv_release);
-} /* ftdi_close */
-
-
+}
 
 /* The SIO requires the first byte to have:
  *  B0 1
@@ -1813,211 +1735,39 @@ static void ftdi_close(struct usb_serial_port *port)
  *
  * The new devices do not require this byte
  */
-static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
-			   const unsigned char *buf, int count)
-{ /* ftdi_write */
-	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	struct urb *urb;
-	unsigned char *buffer;
-	int data_offset ;       /* will be 1 for the SIO and 0 otherwise */
-	int status;
-	int transfer_size;
+static int ftdi_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size)
+{
+	struct ftdi_private *priv;
+	int count;
 	unsigned long flags;
 
-	dbg("%s port %d, %d bytes", __func__, port->number, count);
-
-	if (count == 0) {
-		dbg("write request of 0 bytes");
-		return 0;
-	}
-	spin_lock_irqsave(&priv->tx_lock, flags);
-	if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) {
-		spin_unlock_irqrestore(&priv->tx_lock, flags);
-		dbg("%s - write limit hit", __func__);
-		return 0;
-	}
-	priv->tx_outstanding_urbs++;
-	spin_unlock_irqrestore(&priv->tx_lock, flags);
-
-	data_offset = priv->write_offset;
-	dbg("data_offset set to %d", data_offset);
-
-	/* Determine total transfer size */
-	transfer_size = count;
-	if (data_offset > 0) {
-		/* Original sio needs control bytes too... */
-		transfer_size += (data_offset *
-				((count + (priv->max_packet_size - 1 - data_offset)) /
-				 (priv->max_packet_size - data_offset)));
-	}
-
-	buffer = kmalloc(transfer_size, GFP_ATOMIC);
-	if (!buffer) {
-		dev_err(&port->dev,
-			"%s ran out of kernel memory for urb ...\n", __func__);
-		count = -ENOMEM;
-		goto error_no_buffer;
-	}
-
-	urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!urb) {
-		dev_err(&port->dev, "%s - no more free urbs\n", __func__);
-		count = -ENOMEM;
-		goto error_no_urb;
-	}
+	priv = usb_get_serial_port_data(port);
 
-	/* Copy data */
-	if (data_offset > 0) {
-		/* Original sio requires control byte at start of
-		   each packet. */
-		int user_pktsz = priv->max_packet_size - data_offset;
-		int todo = count;
-		unsigned char *first_byte = buffer;
-		const unsigned char *current_position = buf;
-
-		while (todo > 0) {
-			if (user_pktsz > todo)
-				user_pktsz = todo;
-			/* Write the control byte at the front of the packet*/
-			*first_byte = 1 | ((user_pktsz) << 2);
-			/* Copy data for packet */
-			memcpy(first_byte + data_offset,
-				current_position, user_pktsz);
-			first_byte += user_pktsz + data_offset;
-			current_position += user_pktsz;
-			todo -= user_pktsz;
+	if (priv->chip_type == SIO) {
+		unsigned char *buffer = dest;
+		int i, len, c;
+
+		count = 0;
+		spin_lock_irqsave(&port->lock, flags);
+		for (i = 0; i < size - 1; i += priv->max_packet_size) {
+			len = min_t(int, size - i, priv->max_packet_size) - 1;
+			c = kfifo_out(&port->write_fifo, &buffer[i + 1], len);
+			if (!c)
+				break;
+			buffer[i] = (c << 2) + 1;
+			count += c + 1;
 		}
+		spin_unlock_irqrestore(&port->lock, flags);
 	} else {
-		/* No control byte required. */
-		/* Copy in the data to send */
-		memcpy(buffer, buf, count);
-	}
-
-	usb_serial_debug_data(debug, &port->dev, __func__,
-						transfer_size, buffer);
-
-	/* fill the buffer and send it */
-	usb_fill_bulk_urb(urb, port->serial->dev,
-			usb_sndbulkpipe(port->serial->dev,
-					port->bulk_out_endpointAddress),
-			buffer, transfer_size,
-			ftdi_write_bulk_callback, port);
-
-	status = usb_submit_urb(urb, GFP_ATOMIC);
-	if (status) {
-		dev_err(&port->dev,
-			"%s - failed submitting write urb, error %d\n",
-			__func__, status);
-		count = status;
-		goto error;
-	} else {
-		spin_lock_irqsave(&priv->tx_lock, flags);
-		priv->tx_outstanding_bytes += count;
-		spin_unlock_irqrestore(&priv->tx_lock, flags);
+		count = kfifo_out_locked(&port->write_fifo, dest, size,
+								&port->lock);
 	}
 
-	/* we are done with this urb, so let the host driver
-	 * really free it when it is finished with it */
-	usb_free_urb(urb);
-
-	dbg("%s write returning: %d", __func__, count);
-	return count;
-error:
-	usb_free_urb(urb);
-error_no_urb:
-	kfree(buffer);
-error_no_buffer:
-	spin_lock_irqsave(&priv->tx_lock, flags);
-	priv->tx_outstanding_urbs--;
-	spin_unlock_irqrestore(&priv->tx_lock, flags);
 	return count;
-} /* ftdi_write */
-
-
-/* This function may get called when the device is closed */
-
-static void ftdi_write_bulk_callback(struct urb *urb)
-{
-	unsigned long flags;
-	struct usb_serial_port *port = urb->context;
-	struct ftdi_private *priv;
-	int data_offset;       /* will be 1 for the SIO and 0 otherwise */
-	unsigned long countback;
-	int status = urb->status;
-
-	/* free up the transfer buffer, as usb_free_urb() does not do this */
-	kfree(urb->transfer_buffer);
-
-	dbg("%s - port %d", __func__, port->number);
-
-	priv = usb_get_serial_port_data(port);
-	if (!priv) {
-		dbg("%s - bad port private data pointer - exiting", __func__);
-		return;
-	}
-	/* account for transferred data */
-	countback = urb->transfer_buffer_length;
-	data_offset = priv->write_offset;
-	if (data_offset > 0) {
-		/* Subtract the control bytes */
-		countback -= (data_offset * DIV_ROUND_UP(countback, priv->max_packet_size));
-	}
-	spin_lock_irqsave(&priv->tx_lock, flags);
-	--priv->tx_outstanding_urbs;
-	priv->tx_outstanding_bytes -= countback;
-	spin_unlock_irqrestore(&priv->tx_lock, flags);
-
-	if (status) {
-		dbg("nonzero write bulk status received: %d", status);
-	}
-
-	usb_serial_port_softint(port);
-} /* ftdi_write_bulk_callback */
-
-
-static int ftdi_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	int room;
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&priv->tx_lock, flags);
-	if (priv->tx_outstanding_urbs < URB_UPPER_LIMIT) {
-		/*
-		 * We really can take anything the user throws at us
-		 * but let's pick a nice big number to tell the tty
-		 * layer that we have lots of free space
-		 */
-		room = 2048;
-	} else {
-		room = 0;
-	}
-	spin_unlock_irqrestore(&priv->tx_lock, flags);
-	return room;
 }
 
-static int ftdi_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	int buffered;
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&priv->tx_lock, flags);
-	buffered = (int)priv->tx_outstanding_bytes;
-	spin_unlock_irqrestore(&priv->tx_lock, flags);
-	if (buffered < 0) {
-		dev_err(&port->dev, "%s outstanding tx bytes is negative!\n",
-			__func__);
-		buffered = 0;
-	}
-	return buffered;
-}
+#define FTDI_RS_ERR_MASK (FTDI_RS_BI | FTDI_RS_PE | FTDI_RS_FE | FTDI_RS_OE)
 
 static int ftdi_process_packet(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ftdi_private *priv,
@@ -2045,28 +1795,21 @@ static int ftdi_process_packet(struct tty_struct *tty,
 		priv->prev_status = status;
 	}
 
-	/*
-	 * Although the device uses a bitmask and hence can have multiple
-	 * errors on a packet - the order here sets the priority the error is
-	 * returned to the tty layer.
-	 */
 	flag = TTY_NORMAL;
-	if (packet[1] & FTDI_RS_OE) {
-		flag = TTY_OVERRUN;
-		dbg("OVERRRUN error");
-	}
-	if (packet[1] & FTDI_RS_BI) {
-		flag = TTY_BREAK;
-		dbg("BREAK received");
-		usb_serial_handle_break(port);
-	}
-	if (packet[1] & FTDI_RS_PE) {
-		flag = TTY_PARITY;
-		dbg("PARITY error");
-	}
-	if (packet[1] & FTDI_RS_FE) {
-		flag = TTY_FRAME;
-		dbg("FRAMING error");
+	if (packet[1] & FTDI_RS_ERR_MASK) {
+		/* Break takes precedence over parity, which takes precedence
+		 * over framing errors */
+		if (packet[1] & FTDI_RS_BI) {
+			flag = TTY_BREAK;
+			usb_serial_handle_break(port);
+		} else if (packet[1] & FTDI_RS_PE) {
+			flag = TTY_PARITY;
+		} else if (packet[1] & FTDI_RS_FE) {
+			flag = TTY_FRAME;
+		}
+		/* Overrun is special, not associated with a char */
+		if (packet[1] & FTDI_RS_OE)
+			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
 	}
 
 	len -= 2;
@@ -2074,20 +1817,21 @@ static int ftdi_process_packet(struct tty_struct *tty,
 		return 0;	/* status only */
 	ch = packet + 2;
 
-	if (!(port->console && port->sysrq) && flag == TTY_NORMAL)
-		tty_insert_flip_string(tty, ch, len);
-	else {
+	if (port->port.console && port->sysrq) {
 		for (i = 0; i < len; i++, ch++) {
 			if (!usb_serial_handle_sysrq_char(tty, port, *ch))
 				tty_insert_flip_char(tty, *ch, flag);
 		}
+	} else {
+		tty_insert_flip_string_fixed_flag(tty, ch, flag, len);
 	}
+
 	return len;
 }
 
-static void ftdi_process_read(struct usb_serial_port *port)
+static void ftdi_process_read_urb(struct urb *urb)
 {
-	struct urb *urb = port->read_urb;
+	struct usb_serial_port *port = urb->context;
 	struct tty_struct *tty;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	char *data = (char *)urb->transfer_buffer;
@@ -2109,32 +1853,6 @@ static void ftdi_process_read(struct usb_serial_port *port)
 	tty_kref_put(tty);
 }
 
-static void ftdi_read_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (urb->status) {
-		dbg("%s - nonzero read bulk status received: %d",
-						__func__, urb->status);
-		return;
-	}
-
-	usb_serial_debug_data(debug, &port->dev, __func__,
-				urb->actual_length, urb->transfer_buffer);
-	ftdi_process_read(port);
-
-	spin_lock_irqsave(&port->lock, flags);
-	port->throttled = port->throttle_req;
-	if (!port->throttled) {
-		spin_unlock_irqrestore(&port->lock, flags);
-		ftdi_submit_read_urb(port, GFP_ATOMIC);
-	} else
-		spin_unlock_irqrestore(&port->lock, flags);
-}
-
 static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -2165,15 +1883,13 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
 
 }
 
-
 /* old_termios contains the original termios settings and tty->termios contains
  * the new setting to be used
  * WARNING: set_termios calls this with old_termios in kernel space
  */
-
 static void ftdi_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
-{ /* ftdi_termios */
+{
 	struct usb_device *dev = port->serial->dev;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	struct ktermios *termios = tty->termios;
@@ -2401,7 +2117,6 @@ static int ftdi_tiocmset(struct tty_struct *tty, struct file *file,
 	return update_mctrl(port, set, clear);
 }
 
-
 static int ftdi_ioctl(struct tty_struct *tty, struct file *file,
 					unsigned int cmd, unsigned long arg)
 {
@@ -2470,35 +2185,6 @@ static int ftdi_ioctl(struct tty_struct *tty, struct file *file,
 	return -ENOIOCTLCMD;
 }
 
-static void ftdi_throttle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&port->lock, flags);
-	port->throttle_req = 1;
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-void ftdi_unthrottle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	int was_throttled;
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&port->lock, flags);
-	was_throttled = port->throttled;
-	port->throttled = port->throttle_req = 0;
-	spin_unlock_irqrestore(&port->lock, flags);
-
-	if (was_throttled)
-		ftdi_submit_read_urb(port, GFP_KERNEL);
-}
-
 static int __init ftdi_init(void)
 {
 	int retval;
@@ -2529,15 +2215,12 @@ failed_sio_register:
 	return retval;
 }
 
-
 static void __exit ftdi_exit(void)
 {
-
 	dbg("%s", __func__);
 
 	usb_deregister(&ftdi_driver);
 	usb_serial_deregister(&ftdi_sio_device);
-
 }
 
 
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index ff9bf80327a..213fe3d6128 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -23,14 +23,16 @@
  */
 
 /* Commands */
-#define FTDI_SIO_RESET 		0 /* Reset the port */
-#define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */
-#define FTDI_SIO_SET_FLOW_CTRL	2 /* Set flow control register */
-#define FTDI_SIO_SET_BAUD_RATE	3 /* Set baud rate */
-#define FTDI_SIO_SET_DATA	4 /* Set the data characteristics of the port */
-#define FTDI_SIO_GET_MODEM_STATUS	5 /* Retrieve current value of modem status register */
-#define FTDI_SIO_SET_EVENT_CHAR	6 /* Set the event character */
-#define FTDI_SIO_SET_ERROR_CHAR	7 /* Set the error character */
+#define FTDI_SIO_RESET			0 /* Reset the port */
+#define FTDI_SIO_MODEM_CTRL		1 /* Set the modem control register */
+#define FTDI_SIO_SET_FLOW_CTRL		2 /* Set flow control register */
+#define FTDI_SIO_SET_BAUD_RATE		3 /* Set baud rate */
+#define FTDI_SIO_SET_DATA		4 /* Set the data characteristics of
+					     the port */
+#define FTDI_SIO_GET_MODEM_STATUS	5 /* Retrieve current value of modem
+					     status register */
+#define FTDI_SIO_SET_EVENT_CHAR		6 /* Set the event character */
+#define FTDI_SIO_SET_ERROR_CHAR		7 /* Set the error character */
 #define FTDI_SIO_SET_LATENCY_TIMER	9 /* Set the latency timer */
 #define FTDI_SIO_GET_LATENCY_TIMER	10 /* Get the latency timer */
 
@@ -52,7 +54,7 @@
  */
 
 /* Port Identifier Table */
-#define PIT_DEFAULT 		0 /* SIOA */
+#define PIT_DEFAULT		0 /* SIOA */
 #define PIT_SIOA		1 /* SIOA */
 /* The device this driver is tested with one has only one port */
 #define PIT_SIOB		2 /* SIOB */
@@ -103,20 +105,21 @@
  * wLength:        0
  * Data:           None
  * The BaudDivisor values are calculated as follows:
- * - BaseClock is either 12000000 or 48000000 depending on the device. FIXME: I wish
- *   I knew how to detect old chips to select proper base clock!
+ * - BaseClock is either 12000000 or 48000000 depending on the device.
+ *   FIXME: I wish I knew how to detect old chips to select proper base clock!
  * - BaudDivisor is a fixed point number encoded in a funny way.
  *   (--WRONG WAY OF THINKING--)
  *   BaudDivisor is a fixed point number encoded with following bit weighs:
  *   (-2)(-1)(13..0). It is a radical with a denominator of 4, so values
  *   end with 0.0 (00...), 0.25 (10...), 0.5 (01...), and 0.75 (11...).
  *   (--THE REALITY--)
- *   The both-bits-set has quite different meaning from 0.75 - the chip designers
- *   have decided it to mean 0.125 instead of 0.75.
+ *   The both-bits-set has quite different meaning from 0.75 - the chip
+ *   designers have decided it to mean 0.125 instead of 0.75.
  *   This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates
  *   and Flow Control Consideration for USB to RS232".
  * - BaudDivisor = (BaseClock / 16) / BaudRate, where the (=) operation should
- *   automagically re-encode the resulting value to take fractions into consideration.
+ *   automagically re-encode the resulting value to take fractions into
+ *   consideration.
  * As all values are integers, some bit twiddling is in order:
  *   BaudDivisor = (BaseClock / 16 / BaudRate) |
  *   (((BaseClock / 2 / BaudRate) & 4) ? 0x4000    // 0.5
@@ -146,7 +149,7 @@
  * not supported by the FT8U232AM).
  */
 
-typedef enum {
+enum ftdi_chip_type {
 	SIO = 1,
 	FT8U232AM = 2,
 	FT232BM = 3,
@@ -154,37 +157,36 @@ typedef enum {
 	FT232RL = 5,
 	FT2232H = 6,
 	FT4232H = 7
-} ftdi_chip_type_t;
-
-typedef enum {
- ftdi_sio_b300 = 0,
- ftdi_sio_b600 = 1,
- ftdi_sio_b1200 = 2,
- ftdi_sio_b2400 = 3,
- ftdi_sio_b4800 = 4,
- ftdi_sio_b9600 = 5,
- ftdi_sio_b19200 = 6,
- ftdi_sio_b38400 = 7,
- ftdi_sio_b57600 = 8,
- ftdi_sio_b115200 = 9
-} FTDI_SIO_baudrate_t;
+};
+
+enum ftdi_sio_baudrate {
+	ftdi_sio_b300 = 0,
+	ftdi_sio_b600 = 1,
+	ftdi_sio_b1200 = 2,
+	ftdi_sio_b2400 = 3,
+	ftdi_sio_b4800 = 4,
+	ftdi_sio_b9600 = 5,
+	ftdi_sio_b19200 = 6,
+	ftdi_sio_b38400 = 7,
+	ftdi_sio_b57600 = 8,
+	ftdi_sio_b115200 = 9
+};
 
 /*
- * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor values
- * are calculated internally.
+ * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor
+ * values are calculated internally.
  */
-
-#define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA
-#define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40
-#define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8)
-#define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8)
-#define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8)
-#define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8)
-#define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8)
-#define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11)
-#define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11)
-#define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11)
-#define FTDI_SIO_SET_BREAK (0x1 << 14)
+#define FTDI_SIO_SET_DATA_REQUEST	FTDI_SIO_SET_DATA
+#define FTDI_SIO_SET_DATA_REQUEST_TYPE	0x40
+#define FTDI_SIO_SET_DATA_PARITY_NONE	(0x0 << 8)
+#define FTDI_SIO_SET_DATA_PARITY_ODD	(0x1 << 8)
+#define FTDI_SIO_SET_DATA_PARITY_EVEN	(0x2 << 8)
+#define FTDI_SIO_SET_DATA_PARITY_MARK	(0x3 << 8)
+#define FTDI_SIO_SET_DATA_PARITY_SPACE	(0x4 << 8)
+#define FTDI_SIO_SET_DATA_STOP_BITS_1	(0x0 << 11)
+#define FTDI_SIO_SET_DATA_STOP_BITS_15	(0x1 << 11)
+#define FTDI_SIO_SET_DATA_STOP_BITS_2	(0x2 << 11)
+#define FTDI_SIO_SET_BREAK		(0x1 << 14)
 /* FTDI_SIO_SET_DATA */
 
 /*
@@ -287,8 +289,8 @@ typedef enum {
  *
  * A value of zero in the hIndex field disables handshaking
  *
- * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character
- * and the lValue field contains the XON character.
+ * If Xon/Xoff handshaking is specified, the hValue field should contain the
+ * XOFF character and the lValue field contains the XON character.
  */
 
 /*
@@ -373,7 +375,10 @@ typedef enum {
 
 /* FTDI_SIO_SET_ERROR_CHAR */
 
-/* Set the parity error replacement character for the specified communications port */
+/*
+ * Set the parity error replacement character for the specified communications
+ * port
+ */
 
 /*
  *  BmRequestType:  0100 0000b
@@ -496,9 +501,10 @@ typedef enum {
  *
  * IN Endpoint
  *
- * The device reserves the first two bytes of data on this endpoint to contain the current
- * values of the modem and line status registers. In the absence of data, the device 
- * generates a message consisting of these two status bytes every 40 ms
+ * The device reserves the first two bytes of data on this endpoint to contain
+ * the current values of the modem and line status registers. In the absence of
+ * data, the device generates a message consisting of these two status bytes
+ * every 40 ms
  *
  * Byte 0: Modem Status
  *
@@ -530,21 +536,21 @@ typedef enum {
 #define FTDI_RS0_RI	(1 << 6)
 #define FTDI_RS0_RLSD	(1 << 7)
 
-#define FTDI_RS_DR  1
-#define FTDI_RS_OE (1<<1)
-#define FTDI_RS_PE (1<<2)
-#define FTDI_RS_FE (1<<3)
-#define FTDI_RS_BI (1<<4)
-#define FTDI_RS_THRE (1<<5)
-#define FTDI_RS_TEMT (1<<6)
-#define FTDI_RS_FIFO  (1<<7)
+#define FTDI_RS_DR	1
+#define FTDI_RS_OE	(1<<1)
+#define FTDI_RS_PE	(1<<2)
+#define FTDI_RS_FE	(1<<3)
+#define FTDI_RS_BI	(1<<4)
+#define FTDI_RS_THRE	(1<<5)
+#define FTDI_RS_TEMT	(1<<6)
+#define FTDI_RS_FIFO	(1<<7)
 
 /*
  * OUT Endpoint
  *
- * This device reserves the first bytes of data on this endpoint contain the length
- * and port identifier of the message. For the FTDI USB Serial converter the port 
- * identifier is always 1.
+ * This device reserves the first bytes of data on this endpoint contain the
+ * length and port identifier of the message. For the FTDI USB Serial converter
+ * the port identifier is always 1.
  *
  * Byte 0: Line Status
  *
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 75482cbc399..94d86c3febc 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -275,8 +275,8 @@
 /*
  * Hameg HO820 and HO870 interface (using VID 0x0403)
  */
-#define        HAMEG_HO820_PID         0xed74
-#define        HAMEG_HO870_PID         0xed71
+#define HAMEG_HO820_PID			0xed74
+#define HAMEG_HO870_PID			0xed71
 
 /*
  *  MaxStream devices	www.maxstream.net
@@ -289,14 +289,14 @@
  * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
  * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
  */
-#define FTDI_MHAM_KW_PID 0xEEE8		/* USB-KW interface */
-#define FTDI_MHAM_YS_PID 0xEEE9		/* USB-YS interface */
-#define FTDI_MHAM_Y6_PID 0xEEEA		/* USB-Y6 interface */
-#define FTDI_MHAM_Y8_PID 0xEEEB		/* USB-Y8 interface */
-#define FTDI_MHAM_IC_PID 0xEEEC		/* USB-IC interface */
-#define FTDI_MHAM_DB9_PID 0xEEED	/* USB-DB9 interface */
-#define FTDI_MHAM_RS232_PID 0xEEEE	/* USB-RS232 interface */
-#define FTDI_MHAM_Y9_PID 0xEEEF		/* USB-Y9 interface */
+#define FTDI_MHAM_KW_PID	0xEEE8	/* USB-KW interface */
+#define FTDI_MHAM_YS_PID	0xEEE9	/* USB-YS interface */
+#define FTDI_MHAM_Y6_PID	0xEEEA	/* USB-Y6 interface */
+#define FTDI_MHAM_Y8_PID	0xEEEB	/* USB-Y8 interface */
+#define FTDI_MHAM_IC_PID	0xEEEC	/* USB-IC interface */
+#define FTDI_MHAM_DB9_PID	0xEEED	/* USB-DB9 interface */
+#define FTDI_MHAM_RS232_PID	0xEEEE	/* USB-RS232 interface */
+#define FTDI_MHAM_Y9_PID	0xEEEF	/* USB-Y9 interface */
 
 /* Domintell products  http://www.domintell.com */
 #define FTDI_DOMINTELL_DGQG_PID	0xEF50	/* Master */
@@ -483,9 +483,9 @@
  * Blackfin gnICE JTAG
  * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
  */
-#define ADI_VID 		0x0456
-#define ADI_GNICE_PID 		0xF000
-#define ADI_GNICEPLUS_PID 	0xF001
+#define ADI_VID			0x0456
+#define ADI_GNICE_PID		0xF000
+#define ADI_GNICEPLUS_PID	0xF001
 
 /*
  * RATOC REX-USB60F
@@ -611,13 +611,13 @@
 #define SEALEVEL_2802_7_PID	0X2872	/* SeaLINK+8/485 (2802) Port 7 */
 #define SEALEVEL_2802_8_PID	0X2882	/* SeaLINK+8/485 (2802) Port 8 */
 #define SEALEVEL_2803_1_PID	0X2813	/* SeaLINK+8 (2803) Port 1 */
-#define SEALEVEL_2803_2_PID	0X2823 	/* SeaLINK+8 (2803) Port 2 */
-#define SEALEVEL_2803_3_PID	0X2833 	/* SeaLINK+8 (2803) Port 3 */
-#define SEALEVEL_2803_4_PID	0X2843 	/* SeaLINK+8 (2803) Port 4 */
-#define SEALEVEL_2803_5_PID	0X2853 	/* SeaLINK+8 (2803) Port 5 */
-#define SEALEVEL_2803_6_PID	0X2863 	/* SeaLINK+8 (2803) Port 6 */
-#define SEALEVEL_2803_7_PID	0X2873 	/* SeaLINK+8 (2803) Port 7 */
-#define SEALEVEL_2803_8_PID	0X2883 	/* SeaLINK+8 (2803) Port 8 */
+#define SEALEVEL_2803_2_PID	0X2823	/* SeaLINK+8 (2803) Port 2 */
+#define SEALEVEL_2803_3_PID	0X2833	/* SeaLINK+8 (2803) Port 3 */
+#define SEALEVEL_2803_4_PID	0X2843	/* SeaLINK+8 (2803) Port 4 */
+#define SEALEVEL_2803_5_PID	0X2853	/* SeaLINK+8 (2803) Port 5 */
+#define SEALEVEL_2803_6_PID	0X2863	/* SeaLINK+8 (2803) Port 6 */
+#define SEALEVEL_2803_7_PID	0X2873	/* SeaLINK+8 (2803) Port 7 */
+#define SEALEVEL_2803_8_PID	0X2883	/* SeaLINK+8 (2803) Port 8 */
 
 /*
  * JETI SPECTROMETER SPECBOS 1201
@@ -1013,7 +1013,7 @@
  */
 #define EVOLUTION_VID		0xDEEE	/* Vendor ID */
 #define EVOLUTION_ER1_PID	0x0300	/* ER1 Control Module */
-#define EVO_8U232AM_PID	0x02FF	/* Evolution robotics RCM2 (FT232AM)*/
+#define EVO_8U232AM_PID		0x02FF	/* Evolution robotics RCM2 (FT232AM)*/
 #define EVO_HYBRID_PID		0x0302	/* Evolution robotics RCM4 PID (FT232BM)*/
 #define EVO_RCM4_PID		0x0303	/* Evolution robotics RCM4 PID */
 
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index f804acb138e..a817ced8283 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -1,6 +1,7 @@
 /*
  * USB Serial Converter Generic functions
  *
+ * Copyright (C) 2010 Johan Hovold (jhovold@gmail.com)
  * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
  *
  *	This program is free software; you can redistribute it and/or
@@ -12,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
+#include <linux/sysrq.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/module.h>
@@ -117,7 +119,6 @@ void usb_serial_generic_deregister(void)
 
 int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
-	struct usb_serial *serial = port->serial;
 	int result = 0;
 	unsigned long flags;
 
@@ -130,23 +131,8 @@ int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	/* if we have a bulk endpoint, start reading from it */
-	if (port->bulk_in_size) {
-		/* Start reading from the device */
-		usb_fill_bulk_urb(port->read_urb, serial->dev,
-				   usb_rcvbulkpipe(serial->dev,
-						port->bulk_in_endpointAddress),
-				   port->read_urb->transfer_buffer,
-				   port->read_urb->transfer_buffer_length,
-				   ((serial->type->read_bulk_callback) ?
-				     serial->type->read_bulk_callback :
-				     usb_serial_generic_read_bulk_callback),
-				   port);
-		result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-		if (result)
-			dev_err(&port->dev,
-			    "%s - failed resubmitting read urb, error %d\n",
-							__func__, result);
-	}
+	if (port->bulk_in_size)
+		result = usb_serial_generic_submit_read_urb(port, GFP_KERNEL);
 
 	return result;
 }
@@ -155,13 +141,22 @@ EXPORT_SYMBOL_GPL(usb_serial_generic_open);
 static void generic_cleanup(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
+	unsigned long flags;
+	int i;
 
 	dbg("%s - port %d", __func__, port->number);
 
 	if (serial->dev) {
 		/* shutdown any bulk transfers that might be going on */
-		if (port->bulk_out_size)
+		if (port->bulk_out_size) {
 			usb_kill_urb(port->write_urb);
+			for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
+				usb_kill_urb(port->write_urbs[i]);
+
+			spin_lock_irqsave(&port->lock, flags);
+			kfifo_reset_out(&port->write_fifo);
+			spin_unlock_irqrestore(&port->lock, flags);
+		}
 		if (port->bulk_in_size)
 			usb_kill_urb(port->read_urb);
 	}
@@ -172,146 +167,68 @@ void usb_serial_generic_close(struct usb_serial_port *port)
 	dbg("%s - port %d", __func__, port->number);
 	generic_cleanup(port);
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_close);
 
-static int usb_serial_multi_urb_write(struct tty_struct *tty,
-	struct usb_serial_port *port, const unsigned char *buf, int count)
+int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size)
 {
-	unsigned long flags;
-	struct urb *urb;
-	unsigned char *buffer;
-	int status;
-	int towrite;
-	int bwrite = 0;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (count == 0)
-		dbg("%s - write request of 0 bytes", __func__);
-
-	while (count > 0) {
-		towrite = (count > port->bulk_out_size) ?
-			port->bulk_out_size : count;
-		spin_lock_irqsave(&port->lock, flags);
-		if (port->urbs_in_flight >
-		    port->serial->type->max_in_flight_urbs) {
-			spin_unlock_irqrestore(&port->lock, flags);
-			dbg("%s - write limit hit", __func__);
-			return bwrite;
-		}
-		port->tx_bytes_flight += towrite;
-		port->urbs_in_flight++;
-		spin_unlock_irqrestore(&port->lock, flags);
-
-		buffer = kmalloc(towrite, GFP_ATOMIC);
-		if (!buffer) {
-			dev_err(&port->dev,
-			"%s ran out of kernel memory for urb ...\n", __func__);
-			goto error_no_buffer;
-		}
-
-		urb = usb_alloc_urb(0, GFP_ATOMIC);
-		if (!urb) {
-			dev_err(&port->dev, "%s - no more free urbs\n",
-				__func__);
-			goto error_no_urb;
-		}
-
-		/* Copy data */
-		memcpy(buffer, buf + bwrite, towrite);
-		usb_serial_debug_data(debug, &port->dev, __func__,
-				      towrite, buffer);
-		/* fill the buffer and send it */
-		usb_fill_bulk_urb(urb, port->serial->dev,
-			usb_sndbulkpipe(port->serial->dev,
-					port->bulk_out_endpointAddress),
-			buffer, towrite,
-			usb_serial_generic_write_bulk_callback, port);
-
-		status = usb_submit_urb(urb, GFP_ATOMIC);
-		if (status) {
-			dev_err(&port->dev,
-				"%s - failed submitting write urb, error %d\n",
-				__func__, status);
-			goto error;
-		}
-
-		/* This urb is the responsibility of the host driver now */
-		usb_free_urb(urb);
-		dbg("%s write: %d", __func__, towrite);
-		count -= towrite;
-		bwrite += towrite;
-	}
-	return bwrite;
-
-error:
-	usb_free_urb(urb);
-error_no_urb:
-	kfree(buffer);
-error_no_buffer:
-	spin_lock_irqsave(&port->lock, flags);
-	port->urbs_in_flight--;
-	port->tx_bytes_flight -= towrite;
-	spin_unlock_irqrestore(&port->lock, flags);
-	return bwrite;
+	return kfifo_out_locked(&port->write_fifo, dest, size, &port->lock);
 }
 
 /**
  * usb_serial_generic_write_start - kick off an URB write
  * @port:	Pointer to the &struct usb_serial_port data
  *
- * Returns the number of bytes queued on success. This will be zero if there
- * was nothing to send. Otherwise, it returns a negative errno value
+ * Returns zero on success, or a negative errno value
  */
 static int usb_serial_generic_write_start(struct usb_serial_port *port)
 {
-	struct usb_serial *serial = port->serial;
-	unsigned char *data;
-	int result;
-	int count;
+	struct urb *urb;
+	int count, result;
 	unsigned long flags;
-	bool start_io;
+	int i;
 
-	/* Atomically determine whether we can and need to start a USB
-	 * operation. */
+	if (test_and_set_bit_lock(USB_SERIAL_WRITE_BUSY, &port->flags))
+		return 0;
+retry:
 	spin_lock_irqsave(&port->lock, flags);
-	if (port->write_urb_busy)
-		start_io = false;
-	else {
-		start_io = (kfifo_len(&port->write_fifo) != 0);
-		port->write_urb_busy = start_io;
+	if (!port->write_urbs_free || !kfifo_len(&port->write_fifo)) {
+		clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags);
+		spin_unlock_irqrestore(&port->lock, flags);
+		return 0;
 	}
+	i = (int)find_first_bit(&port->write_urbs_free,
+						ARRAY_SIZE(port->write_urbs));
 	spin_unlock_irqrestore(&port->lock, flags);
 
-	if (!start_io)
-		return 0;
-
-	data = port->write_urb->transfer_buffer;
-	count = kfifo_out_locked(&port->write_fifo, data, port->bulk_out_size, &port->lock);
-	usb_serial_debug_data(debug, &port->dev, __func__, count, data);
-
-	/* set up our urb */
-	usb_fill_bulk_urb(port->write_urb, serial->dev,
-			   usb_sndbulkpipe(serial->dev,
-				port->bulk_out_endpointAddress),
-			   port->write_urb->transfer_buffer, count,
-			   ((serial->type->write_bulk_callback) ?
-			     serial->type->write_bulk_callback :
-			     usb_serial_generic_write_bulk_callback),
-			   port);
-
-	/* send the data out the bulk port */
-	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+	urb = port->write_urbs[i];
+	count = port->serial->type->prepare_write_buffer(port,
+						urb->transfer_buffer,
+						port->bulk_out_size);
+	urb->transfer_buffer_length = count;
+	usb_serial_debug_data(debug, &port->dev, __func__, count,
+						urb->transfer_buffer);
+	result = usb_submit_urb(urb, GFP_ATOMIC);
 	if (result) {
-		dev_err(&port->dev,
-			"%s - failed submitting write urb, error %d\n",
+		dev_err(&port->dev, "%s - error submitting urb: %d\n",
 						__func__, result);
-		/* don't have to grab the lock here, as we will
-		   retry if != 0 */
-		port->write_urb_busy = 0;
-	} else
-		result = count;
+		clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags);
+		return result;
+	}
+	clear_bit(i, &port->write_urbs_free);
 
-	return result;
+	spin_lock_irqsave(&port->lock, flags);
+	port->tx_bytes += count;
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	/* Try sending off another urb, unless in irq context (in which case
+	 * there will be no free urb). */
+	if (!in_irq())
+		goto retry;
+
+	clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags);
+
+	return 0;
 }
 
 /**
@@ -328,7 +245,6 @@ static int usb_serial_generic_write_start(struct usb_serial_port *port)
 int usb_serial_generic_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count)
 {
-	struct usb_serial *serial = port->serial;
 	int result;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -337,31 +253,23 @@ int usb_serial_generic_write(struct tty_struct *tty,
 	if (!port->bulk_out_size)
 		return -ENODEV;
 
-	if (count == 0) {
-		dbg("%s - write request of 0 bytes", __func__);
+	if (!count)
 		return 0;
-	}
-
-	if (serial->type->max_in_flight_urbs)
-		return usb_serial_multi_urb_write(tty, port,
-						  buf, count);
 
 	count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock);
 	result = usb_serial_generic_write_start(port);
+	if (result)
+		return result;
 
-	if (result >= 0)
-		result = count;
-
-	return result;
+	return count;
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_write);
 
 int usb_serial_generic_write_room(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct usb_serial *serial = port->serial;
 	unsigned long flags;
-	int room = 0;
+	int room;
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -369,14 +277,7 @@ int usb_serial_generic_write_room(struct tty_struct *tty)
 		return 0;
 
 	spin_lock_irqsave(&port->lock, flags);
-	if (serial->type->max_in_flight_urbs) {
-		if (port->urbs_in_flight < serial->type->max_in_flight_urbs)
-			room = port->bulk_out_size *
-				(serial->type->max_in_flight_urbs -
-				 port->urbs_in_flight);
-	} else {
-		room = kfifo_avail(&port->write_fifo);
-	}
+	room = kfifo_avail(&port->write_fifo);
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	dbg("%s - returns %d", __func__, room);
@@ -386,7 +287,6 @@ int usb_serial_generic_write_room(struct tty_struct *tty)
 int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct usb_serial *serial = port->serial;
 	unsigned long flags;
 	int chars;
 
@@ -396,61 +296,47 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
 		return 0;
 
 	spin_lock_irqsave(&port->lock, flags);
-	if (serial->type->max_in_flight_urbs)
-		chars = port->tx_bytes_flight;
-	else
-		chars = kfifo_len(&port->write_fifo);
+	chars = kfifo_len(&port->write_fifo) + port->tx_bytes;
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	dbg("%s - returns %d", __func__, chars);
 	return chars;
 }
 
-
-void usb_serial_generic_resubmit_read_urb(struct usb_serial_port *port,
-			gfp_t mem_flags)
+int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
+					gfp_t mem_flags)
 {
-	struct urb *urb = port->read_urb;
-	struct usb_serial *serial = port->serial;
 	int result;
 
-	/* Continue reading from device */
-	usb_fill_bulk_urb(urb, serial->dev,
-			   usb_rcvbulkpipe(serial->dev,
-					port->bulk_in_endpointAddress),
-			   urb->transfer_buffer,
-			   urb->transfer_buffer_length,
-			   ((serial->type->read_bulk_callback) ?
-			     serial->type->read_bulk_callback :
-			     usb_serial_generic_read_bulk_callback), port);
-
-	result = usb_submit_urb(urb, mem_flags);
+	result = usb_submit_urb(port->read_urb, mem_flags);
 	if (result && result != -EPERM) {
-		dev_err(&port->dev,
-			"%s - failed resubmitting read urb, error %d\n",
+		dev_err(&port->dev, "%s - error submitting urb: %d\n",
 							__func__, result);
 	}
+	return result;
 }
-EXPORT_SYMBOL_GPL(usb_serial_generic_resubmit_read_urb);
+EXPORT_SYMBOL_GPL(usb_serial_generic_submit_read_urb);
 
-/* Push data to tty layer and resubmit the bulk read URB */
-static void flush_and_resubmit_read_urb(struct usb_serial_port *port)
+void usb_serial_generic_process_read_urb(struct urb *urb)
 {
-	struct urb *urb = port->read_urb;
-	struct tty_struct *tty = tty_port_tty_get(&port->port);
+	struct usb_serial_port *port = urb->context;
+	struct tty_struct *tty;
 	char *ch = (char *)urb->transfer_buffer;
 	int i;
 
+	if (!urb->actual_length)
+		return;
+
+	tty = tty_port_tty_get(&port->port);
 	if (!tty)
-		goto done;
+		return;
 
 	/* The per character mucking around with sysrq path it too slow for
 	   stuff like 3G modems, so shortcircuit it in the 99.9999999% of cases
 	   where the USB serial is not a console anyway */
-	if (!port->console || !port->sysrq)
+	if (!port->port.console || !port->sysrq)
 		tty_insert_flip_string(tty, ch, urb->actual_length);
 	else {
-		/* Push data to tty */
 		for (i = 0; i < urb->actual_length; i++, ch++) {
 			if (!usb_serial_handle_sysrq_char(tty, port, *ch))
 				tty_insert_flip_char(tty, *ch, TTY_NORMAL);
@@ -458,9 +344,8 @@ static void flush_and_resubmit_read_urb(struct usb_serial_port *port)
 	}
 	tty_flip_buffer_push(tty);
 	tty_kref_put(tty);
-done:
-	usb_serial_generic_resubmit_read_urb(port, GFP_ATOMIC);
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_process_read_urb);
 
 void usb_serial_generic_read_bulk_callback(struct urb *urb)
 {
@@ -479,13 +364,14 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb)
 
 	usb_serial_debug_data(debug, &port->dev, __func__,
 						urb->actual_length, data);
+	port->serial->type->process_read_urb(urb);
 
 	/* Throttle the device if requested by tty */
 	spin_lock_irqsave(&port->lock, flags);
 	port->throttled = port->throttle_req;
 	if (!port->throttled) {
 		spin_unlock_irqrestore(&port->lock, flags);
-		flush_and_resubmit_read_urb(port);
+		usb_serial_generic_submit_read_urb(port, GFP_ATOMIC);
 	} else
 		spin_unlock_irqrestore(&port->lock, flags);
 }
@@ -496,30 +382,29 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb)
 	unsigned long flags;
 	struct usb_serial_port *port = urb->context;
 	int status = urb->status;
+	int i;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (port->serial->type->max_in_flight_urbs) {
-		kfree(urb->transfer_buffer);
+	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
+		if (port->write_urbs[i] == urb)
+			break;
+
+	spin_lock_irqsave(&port->lock, flags);
+	port->tx_bytes -= urb->transfer_buffer_length;
+	set_bit(i, &port->write_urbs_free);
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	if (status) {
+		dbg("%s - non-zero urb status: %d", __func__, status);
 
 		spin_lock_irqsave(&port->lock, flags);
-		--port->urbs_in_flight;
-		port->tx_bytes_flight -= urb->transfer_buffer_length;
-		if (port->urbs_in_flight < 0)
-			port->urbs_in_flight = 0;
+		kfifo_reset_out(&port->write_fifo);
 		spin_unlock_irqrestore(&port->lock, flags);
 	} else {
-		port->write_urb_busy = 0;
-
-		if (status)
-			kfifo_reset_out(&port->write_fifo);
-		else
-			usb_serial_generic_write_start(port);
+		usb_serial_generic_write_start(port);
 	}
 
-	if (status)
-		dbg("%s - non-zero urb status: %d", __func__, status);
-
 	usb_serial_port_softint(port);
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_write_bulk_callback);
@@ -537,31 +422,31 @@ void usb_serial_generic_throttle(struct tty_struct *tty)
 	port->throttle_req = 1;
 	spin_unlock_irqrestore(&port->lock, flags);
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_throttle);
 
 void usb_serial_generic_unthrottle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	int was_throttled;
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
 	/* Clear the throttle flags */
-	spin_lock_irqsave(&port->lock, flags);
+	spin_lock_irq(&port->lock);
 	was_throttled = port->throttled;
 	port->throttled = port->throttle_req = 0;
-	spin_unlock_irqrestore(&port->lock, flags);
+	spin_unlock_irq(&port->lock);
 
-	if (was_throttled) {
-		/* Resume reading from device */
-		flush_and_resubmit_read_urb(port);
-	}
+	if (was_throttled)
+		usb_serial_generic_submit_read_urb(port, GFP_KERNEL);
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_unthrottle);
 
+#ifdef CONFIG_MAGIC_SYSRQ
 int usb_serial_handle_sysrq_char(struct tty_struct *tty,
 			struct usb_serial_port *port, unsigned int ch)
 {
-	if (port->sysrq && port->console) {
+	if (port->sysrq && port->port.console) {
 		if (ch && time_before(jiffies, port->sysrq)) {
 			handle_sysrq(ch, tty);
 			port->sysrq = 0;
@@ -571,6 +456,13 @@ int usb_serial_handle_sysrq_char(struct tty_struct *tty,
 	}
 	return 0;
 }
+#else
+int usb_serial_handle_sysrq_char(struct tty_struct *tty,
+			struct usb_serial_port *port, unsigned int ch)
+{
+	return 0;
+}
+#endif
 EXPORT_SYMBOL_GPL(usb_serial_handle_sysrq_char);
 
 int usb_serial_handle_break(struct usb_serial_port *port)
@@ -600,7 +492,7 @@ int usb_serial_generic_resume(struct usb_serial *serial)
 				c++;
 		}
 
-		if (port->write_urb) {
+		if (port->bulk_out_size) {
 			r = usb_serial_generic_write_start(port);
 			if (r < 0)
 				c++;
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 3ef8df0ef88..76e6fb3aab7 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -3020,7 +3020,7 @@ static int edge_startup(struct usb_serial *serial)
 
 	/* set up our port private structures */
 	for (i = 0; i < serial->num_ports; ++i) {
-		edge_port = kmalloc(sizeof(struct edgeport_port), GFP_KERNEL);
+		edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL);
 		if (edge_port == NULL) {
 			dev_err(&serial->dev->dev, "%s - Out of memory\n",
 								   __func__);
@@ -3033,7 +3033,6 @@ static int edge_startup(struct usb_serial *serial)
 			kfree(edge_serial);
 			return -ENOMEM;
 		}
-		memset(edge_port, 0, sizeof(struct edgeport_port));
 		spin_lock_init(&edge_port->ep_lock);
 		edge_port->port = serial->port[i];
 		usb_set_serial_port_data(serial->port[i], edge_port);
diff --git a/drivers/usb/serial/io_edgeport.h b/drivers/usb/serial/io_edgeport.h
index cb201c1f67f..dced7ec6547 100644
--- a/drivers/usb/serial/io_edgeport.h
+++ b/drivers/usb/serial/io_edgeport.h
@@ -34,15 +34,15 @@
 
 
 
-/* The following table is used to map the USBx port number to 
+/* The following table is used to map the USBx port number to
  * the device serial number (or physical USB path), */
 #define MAX_EDGEPORTS	64
 
 struct comMapper {
 	char	SerialNumber[MAX_SERIALNUMBER_LEN+1];	/* Serial number/usb path */
-	int	numPorts;			       	/* Number of ports */
-	int	Original[MAX_RS232_PORTS];	       	/* Port numbers set by IOCTL */
-	int	Port[MAX_RS232_PORTS];		       	/* Actual used port numbers */
+	int	numPorts;				/* Number of ports */
+	int	Original[MAX_RS232_PORTS];		/* Port numbers set by IOCTL */
+	int	Port[MAX_RS232_PORTS];			/* Actual used port numbers */
 };
 
 
@@ -51,7 +51,7 @@ struct comMapper {
 /* /proc/edgeport Interface
  * This interface uses read/write/lseek interface to talk to the edgeport driver
  * the following read functions are supported: */
-#define PROC_GET_MAPPING_TO_PATH 	1
+#define PROC_GET_MAPPING_TO_PATH	1
 #define PROC_GET_COM_ENTRY		2
 #define PROC_GET_EDGE_MANUF_DESCRIPTOR	3
 #define PROC_GET_BOOT_DESCRIPTOR	4
@@ -64,7 +64,7 @@ struct comMapper {
 
 
 /* the following write functions are supported: */
-#define PROC_SET_COM_MAPPING 		1
+#define PROC_SET_COM_MAPPING		1
 #define PROC_SET_COM_ENTRY		2
 
 
@@ -97,8 +97,8 @@ struct edgeport_product_info {
 	__u8	BoardRev;			/* PCB revision level (chg only if s/w visible) */
 
 	__u8	BootMajorVersion;		/* Boot Firmware version: xx. */
-	__u8	BootMinorVersion;		/*	   		  yy. */
-	__le16	BootBuildNumber;		/*		      	  zzzz (LE format) */
+	__u8	BootMinorVersion;		/*			  yy. */
+	__le16	BootBuildNumber;		/*			  zzzz (LE format) */
 
 	__u8	FirmwareMajorVersion;		/* Operational Firmware version:xx. */
 	__u8	FirmwareMinorVersion;		/*				yy. */
diff --git a/drivers/usb/serial/io_ionsp.h b/drivers/usb/serial/io_ionsp.h
index 092e03d2dfc..5cc591bae54 100644
--- a/drivers/usb/serial/io_ionsp.h
+++ b/drivers/usb/serial/io_ionsp.h
@@ -89,10 +89,10 @@ All 16-bit fields are sent in little-endian (Intel) format.
 //
 
 struct int_status_pkt {
-	__u16      RxBytesAvail;		    // Additional bytes available to
-						    // be read from Bulk IN pipe
-	__u16      TxCredits[ MAX_RS232_PORTS ];   // Additional space available in
-						    // given port's TxBuffer
+	__u16 RxBytesAvail;			// Additional bytes available to
+						// be read from Bulk IN pipe
+	__u16 TxCredits[MAX_RS232_PORTS];	// Additional space available in
+						// given port's TxBuffer
 };
 
 
@@ -115,24 +115,24 @@ struct int_status_pkt {
 #define	IOSP_CMD_STAT_BIT		0x80		// If set, this is command/status header
 
 #define IS_CMD_STAT_HDR(Byte1)		((Byte1) & IOSP_CMD_STAT_BIT)
-#define IS_DATA_HDR(Byte1)		(! IS_CMD_STAT_HDR(Byte1))
+#define IS_DATA_HDR(Byte1)		(!IS_CMD_STAT_HDR(Byte1))
 
 #define	IOSP_GET_HDR_PORT(Byte1)		((__u8) ((Byte1) & IOSP_PORT_MASK))
-#define	IOSP_GET_HDR_DATA_LEN(Byte1, Byte2)	((__u16) ( ((__u16)((Byte1) & 0x78)) << 5) | (Byte2))
+#define	IOSP_GET_HDR_DATA_LEN(Byte1, Byte2)	((__u16) (((__u16)((Byte1) & 0x78)) << 5) | (Byte2))
 #define	IOSP_GET_STATUS_CODE(Byte1)		((__u8) (((Byte1) &  0x78) >> 3))
 
 
 //
 // These macros build the 1st and 2nd bytes for a data header
 //
-#define	IOSP_BUILD_DATA_HDR1(Port, Len)		((__u8) (((Port) | ((__u8) (((__u16) (Len)) >> 5) & 0x78 ))))
+#define	IOSP_BUILD_DATA_HDR1(Port, Len)		((__u8) (((Port) | ((__u8) (((__u16) (Len)) >> 5) & 0x78))))
 #define	IOSP_BUILD_DATA_HDR2(Port, Len)		((__u8) (Len))
 
 
 //
 // These macros build the 1st and 2nd bytes for a command header
 //
-#define	IOSP_BUILD_CMD_HDR1(Port, Cmd)		((__u8) ( IOSP_CMD_STAT_BIT | (Port) |	((__u8) ((Cmd) << 3)) ))
+#define	IOSP_BUILD_CMD_HDR1(Port, Cmd)		((__u8) (IOSP_CMD_STAT_BIT | (Port) | ((__u8) ((Cmd) << 3))))
 
 
 //--------------------------------------------------------------
@@ -194,24 +194,25 @@ struct int_status_pkt {
 // Define macros to simplify building of IOSP cmds
 //
 
-#define	MAKE_CMD_WRITE_REG(ppBuf, pLen, Port, Reg, Val)						\
-	do {											\
-		(*(ppBuf))[0] = IOSP_BUILD_CMD_HDR1( (Port), IOSP_WRITE_UART_REG(Reg) );	\
-		(*(ppBuf))[1] = (Val);								\
-												\
-		*ppBuf += 2;									\
-		*pLen  += 2;									\
-	} while (0)
+#define MAKE_CMD_WRITE_REG(ppBuf, pLen, Port, Reg, Val)			\
+do {									\
+	(*(ppBuf))[0] = IOSP_BUILD_CMD_HDR1((Port),			\
+					    IOSP_WRITE_UART_REG(Reg));	\
+	(*(ppBuf))[1] = (Val);						\
+									\
+	*ppBuf += 2;							\
+	*pLen  += 2;							\
+} while (0)
 
-#define	MAKE_CMD_EXT_CMD(ppBuf, pLen, Port, ExtCmd, Param)					\
-	do {											\
-		(*(ppBuf))[0] = IOSP_BUILD_CMD_HDR1( (Port), IOSP_EXT_CMD );			\
-		(*(ppBuf))[1] = (ExtCmd);							\
-		(*(ppBuf))[2] = (Param);							\
-												\
-		*ppBuf += 3;									\
-		*pLen  += 3;									\
-	} while (0)
+#define MAKE_CMD_EXT_CMD(ppBuf, pLen, Port, ExtCmd, Param)		\
+do {									\
+	(*(ppBuf))[0] = IOSP_BUILD_CMD_HDR1((Port), IOSP_EXT_CMD);	\
+	(*(ppBuf))[1] = (ExtCmd);					\
+	(*(ppBuf))[2] = (Param);					\
+									\
+	*ppBuf += 3;							\
+	*pLen  += 3;							\
+} while (0)
 
 
 
@@ -310,16 +311,16 @@ struct int_status_pkt {
 //
 //	IOSP_CMD_RX_CHECK_REQ
 //
-//  This command is used to assist in the implementation of the 
-//  IOCTL_SERIAL_PURGE Windows IOCTL.  
-//  This IOSP command tries to place a marker at the end of the RX 
-//  queue in the Edgeport. If the Edgeport RX queue is full then 
-//  the Check will be discarded.  
-//  It is up to the device driver to timeout waiting for the 
-//  RX_CHECK_RSP.  If a RX_CHECK_RSP is received, the driver is 
-//	sure that all data has been received from the edgeport and 
+//  This command is used to assist in the implementation of the
+//  IOCTL_SERIAL_PURGE Windows IOCTL.
+//  This IOSP command tries to place a marker at the end of the RX
+//  queue in the Edgeport. If the Edgeport RX queue is full then
+//  the Check will be discarded.
+//  It is up to the device driver to timeout waiting for the
+//  RX_CHECK_RSP.  If a RX_CHECK_RSP is received, the driver is
+//	sure that all data has been received from the edgeport and
 //	may now purge any internal RX buffers.
-//  Note tat the sequence numbers may be used to detect lost 
+//  Note tat the sequence numbers may be used to detect lost
 //  CHECK_REQs.
 
 //  Example for Port 0
@@ -341,7 +342,7 @@ struct int_status_pkt {
 //
 //	1ssssPPP P1P1P1P1 [ P2P2P2P2P2 ]...
 //
-// 	ssss:	00-07	2-byte status.	ssss identifies which UART register
+//	ssss:	00-07	2-byte status.	ssss identifies which UART register
 //					has changed value, and the new value is in P1.
 //					Note that the ssss values do not correspond to the
 //					16554 register numbers given in 16554.H. Instead,
@@ -383,14 +384,14 @@ struct int_status_pkt {
 // returns this in order to report
 // changes in modem status lines
 // (CTS, DSR, RI, CD)
-// 
+//
 
 //					0x02	// Available for future expansion
-//					0x03	// 
-//					0x04	// 
-//					0x05	// 
-//					0x06	// 
-//					0x07	// 
+//					0x03	//
+//					0x04	//
+//					0x05	//
+//					0x06	//
+//					0x07	//
 
 
 /****************************************************
@@ -400,7 +401,7 @@ struct int_status_pkt {
 #define	IOSP_STATUS_LSR_DATA		0x08	// P1 is new value of LSR register (same as STATUS_LSR)
 
 // P2 is errored character read from
-//    RxFIFO after LSR reported an error.													
+//    RxFIFO after LSR reported an error.
 
 #define	IOSP_EXT_STATUS			0x09	// P1 is status/response code, param in P2.
 
@@ -408,7 +409,7 @@ struct int_status_pkt {
 // Response Codes (P1 values) for 3-byte status messages
 
 #define	IOSP_EXT_STATUS_CHASE_RSP	0	// Reply to CHASE_PORT cmd. P2 is outcome:
-#define	IOSP_EXT_STATUS_CHASE_PASS	0	// 	P2 = 0: All Tx data drained successfully
+#define	IOSP_EXT_STATUS_CHASE_PASS	0	//	P2 = 0: All Tx data drained successfully
 #define	IOSP_EXT_STATUS_CHASE_FAIL	1	//	P2 = 1: Timed out (stuck due to flow
 
 //			control from remote device).
@@ -446,9 +447,9 @@ struct int_status_pkt {
 // Macros to parse status messages
 //
 
-#define	IOSP_GET_STATUS_LEN(code)	( (code) < 8 ? 2 : ((code) < 0x0A ? 3 : 4) )
+#define	IOSP_GET_STATUS_LEN(code)	((code) < 8 ? 2 : ((code) < 0x0A ? 3 : 4))
 
-#define	IOSP_STATUS_IS_2BYTE(code)	( (code) < 0x08 )
-#define	IOSP_STATUS_IS_3BYTE(code)	( ((code) >= 0x08) && ((code) <= 0x0B) )
-#define	IOSP_STATUS_IS_4BYTE(code)	( ((code) >= 0x0C) && ((code) <= 0x0D) )
+#define	IOSP_STATUS_IS_2BYTE(code)	((code) < 0x08)
+#define	IOSP_STATUS_IS_3BYTE(code)	(((code) >= 0x08) && ((code) <= 0x0B))
+#define	IOSP_STATUS_IS_4BYTE(code)	(((code) >= 0x0C) && ((code) <= 0x0D))
 
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index aa876f71f22..0fca2659206 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -36,6 +36,7 @@
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
 #include <linux/serial.h>
+#include <linux/kfifo.h>
 #include <linux/ioctl.h>
 #include <linux/firmware.h>
 #include <linux/uaccess.h>
@@ -56,10 +57,6 @@
 #define EPROM_PAGE_SIZE		64
 
 
-struct edgeport_uart_buf_desc {
-	__u32 count;		/* Number of bytes currently in buffer */
-};
-
 /* different hardware types */
 #define HARDWARE_TYPE_930	0
 #define HARDWARE_TYPE_TIUMP	1
@@ -87,14 +84,6 @@ struct product_info {
 	__u8	hardware_type;		/* Type of hardware */
 } __attribute__((packed));
 
-/* circular buffer */
-struct edge_buf {
-	unsigned int	buf_size;
-	char		*buf_buf;
-	char		*buf_get;
-	char		*buf_put;
-};
-
 struct edgeport_port {
 	__u16 uart_base;
 	__u16 dma_address;
@@ -108,7 +97,6 @@ struct edgeport_port {
 	int baud_rate;
 	int close_pending;
 	int lsr_event;
-	struct edgeport_uart_buf_desc tx;
 	struct async_icount	icount;
 	wait_queue_head_t	delta_msr_wait;	/* for handling sleeping while
 						   waiting for msr change to
@@ -119,7 +107,7 @@ struct edgeport_port {
 	spinlock_t ep_lock;
 	int ep_read_urb_state;
 	int ep_write_urb_in_use;
-	struct edge_buf *ep_out_buf;
+	struct kfifo write_fifo;
 };
 
 struct edgeport_serial {
@@ -249,17 +237,6 @@ static void edge_send(struct tty_struct *tty);
 static int edge_create_sysfs_attrs(struct usb_serial_port *port);
 static int edge_remove_sysfs_attrs(struct usb_serial_port *port);
 
-/* circular buffer */
-static struct edge_buf *edge_buf_alloc(unsigned int size);
-static void edge_buf_free(struct edge_buf *eb);
-static void edge_buf_clear(struct edge_buf *eb);
-static unsigned int edge_buf_data_avail(struct edge_buf *eb);
-static unsigned int edge_buf_space_avail(struct edge_buf *eb);
-static unsigned int edge_buf_put(struct edge_buf *eb, const char *buf,
-	unsigned int count);
-static unsigned int edge_buf_get(struct edge_buf *eb, char *buf,
-	unsigned int count);
-
 
 static int ti_vread_sync(struct usb_device *dev, __u8 request,
 				__u16 value, __u16 index, u8 *data, int size)
@@ -590,7 +567,7 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout,
 	add_wait_queue(&tty->write_wait, &wait);
 	for (;;) {
 		set_current_state(TASK_INTERRUPTIBLE);
-		if (edge_buf_data_avail(port->ep_out_buf) == 0
+		if (kfifo_len(&port->write_fifo) == 0
 		|| timeout == 0 || signal_pending(current)
 		|| !usb_get_intfdata(port->port->serial->interface))
 			/* disconnect */
@@ -602,7 +579,7 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout,
 	set_current_state(TASK_RUNNING);
 	remove_wait_queue(&tty->write_wait, &wait);
 	if (flush)
-		edge_buf_clear(port->ep_out_buf);
+		kfifo_reset_out(&port->write_fifo);
 	spin_unlock_irqrestore(&port->ep_lock, flags);
 	tty_kref_put(tty);
 
@@ -2089,7 +2066,6 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
 				const unsigned char *data, int count)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -2103,10 +2079,8 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
 	if (edge_port->close_pending == 1)
 		return -ENODEV;
 
-	spin_lock_irqsave(&edge_port->ep_lock, flags);
-	count = edge_buf_put(edge_port->ep_out_buf, data, count);
-	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
-
+	count = kfifo_in_locked(&edge_port->write_fifo, data, count,
+							&edge_port->ep_lock);
 	edge_send(tty);
 
 	return count;
@@ -2129,7 +2103,7 @@ static void edge_send(struct tty_struct *tty)
 		return;
 	}
 
-	count = edge_buf_get(edge_port->ep_out_buf,
+	count = kfifo_out(&edge_port->write_fifo,
 				port->write_urb->transfer_buffer,
 				port->bulk_out_size);
 
@@ -2185,7 +2159,7 @@ static int edge_write_room(struct tty_struct *tty)
 		return 0;
 
 	spin_lock_irqsave(&edge_port->ep_lock, flags);
-	room = edge_buf_space_avail(edge_port->ep_out_buf);
+	room = kfifo_avail(&edge_port->write_fifo);
 	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
 
 	dbg("%s - returns %d", __func__, room);
@@ -2207,7 +2181,7 @@ static int edge_chars_in_buffer(struct tty_struct *tty)
 		return 0;
 
 	spin_lock_irqsave(&edge_port->ep_lock, flags);
-	chars = edge_buf_data_avail(edge_port->ep_out_buf);
+	chars = kfifo_len(&edge_port->write_fifo);
 	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
 
 	dbg("%s - returns %d", __func__, chars);
@@ -2664,8 +2638,8 @@ static int edge_startup(struct usb_serial *serial)
 			goto cleanup;
 		}
 		spin_lock_init(&edge_port->ep_lock);
-		edge_port->ep_out_buf = edge_buf_alloc(EDGE_OUT_BUF_SIZE);
-		if (edge_port->ep_out_buf == NULL) {
+		if (kfifo_alloc(&edge_port->write_fifo, EDGE_OUT_BUF_SIZE,
+								GFP_KERNEL)) {
 			dev_err(&serial->dev->dev, "%s - Out of memory\n",
 								__func__);
 			kfree(edge_port);
@@ -2682,7 +2656,7 @@ static int edge_startup(struct usb_serial *serial)
 cleanup:
 	for (--i; i >= 0; --i) {
 		edge_port = usb_get_serial_port_data(serial->port[i]);
-		edge_buf_free(edge_port->ep_out_buf);
+		kfifo_free(&edge_port->write_fifo);
 		kfree(edge_port);
 		usb_set_serial_port_data(serial->port[i], NULL);
 	}
@@ -2713,7 +2687,7 @@ static void edge_release(struct usb_serial *serial)
 
 	for (i = 0; i < serial->num_ports; ++i) {
 		edge_port = usb_get_serial_port_data(serial->port[i]);
-		edge_buf_free(edge_port->ep_out_buf);
+		kfifo_free(&edge_port->write_fifo);
 		kfree(edge_port);
 	}
 	kfree(usb_get_serial_data(serial));
@@ -2763,182 +2737,6 @@ static int edge_remove_sysfs_attrs(struct usb_serial_port *port)
 }
 
 
-/* Circular Buffer */
-
-/*
- * edge_buf_alloc
- *
- * Allocate a circular buffer and all associated memory.
- */
-
-static struct edge_buf *edge_buf_alloc(unsigned int size)
-{
-	struct edge_buf *eb;
-
-
-	if (size == 0)
-		return NULL;
-
-	eb = kmalloc(sizeof(struct edge_buf), GFP_KERNEL);
-	if (eb == NULL)
-		return NULL;
-
-	eb->buf_buf = kmalloc(size, GFP_KERNEL);
-	if (eb->buf_buf == NULL) {
-		kfree(eb);
-		return NULL;
-	}
-
-	eb->buf_size = size;
-	eb->buf_get = eb->buf_put = eb->buf_buf;
-
-	return eb;
-}
-
-
-/*
- * edge_buf_free
- *
- * Free the buffer and all associated memory.
- */
-
-static void edge_buf_free(struct edge_buf *eb)
-{
-	if (eb) {
-		kfree(eb->buf_buf);
-		kfree(eb);
-	}
-}
-
-
-/*
- * edge_buf_clear
- *
- * Clear out all data in the circular buffer.
- */
-
-static void edge_buf_clear(struct edge_buf *eb)
-{
-	if (eb != NULL)
-		eb->buf_get = eb->buf_put;
-	/* equivalent to a get of all data available */
-}
-
-
-/*
- * edge_buf_data_avail
- *
- * Return the number of bytes of data available in the circular
- * buffer.
- */
-
-static unsigned int edge_buf_data_avail(struct edge_buf *eb)
-{
-	if (eb == NULL)
-		return 0;
-	return ((eb->buf_size + eb->buf_put - eb->buf_get) % eb->buf_size);
-}
-
-
-/*
- * edge_buf_space_avail
- *
- * Return the number of bytes of space available in the circular
- * buffer.
- */
-
-static unsigned int edge_buf_space_avail(struct edge_buf *eb)
-{
-	if (eb == NULL)
-		return 0;
-	return ((eb->buf_size + eb->buf_get - eb->buf_put - 1) % eb->buf_size);
-}
-
-
-/*
- * edge_buf_put
- *
- * Copy data data from a user buffer and put it into the circular buffer.
- * Restrict to the amount of space available.
- *
- * Return the number of bytes copied.
- */
-
-static unsigned int edge_buf_put(struct edge_buf *eb, const char *buf,
-	unsigned int count)
-{
-	unsigned int len;
-
-
-	if (eb == NULL)
-		return 0;
-
-	len  = edge_buf_space_avail(eb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = eb->buf_buf + eb->buf_size - eb->buf_put;
-	if (count > len) {
-		memcpy(eb->buf_put, buf, len);
-		memcpy(eb->buf_buf, buf+len, count - len);
-		eb->buf_put = eb->buf_buf + count - len;
-	} else {
-		memcpy(eb->buf_put, buf, count);
-		if (count < len)
-			eb->buf_put += count;
-		else /* count == len */
-			eb->buf_put = eb->buf_buf;
-	}
-
-	return count;
-}
-
-
-/*
- * edge_buf_get
- *
- * Get data from the circular buffer and copy to the given buffer.
- * Restrict to the amount of data available.
- *
- * Return the number of bytes copied.
- */
-
-static unsigned int edge_buf_get(struct edge_buf *eb, char *buf,
-	unsigned int count)
-{
-	unsigned int len;
-
-
-	if (eb == NULL)
-		return 0;
-
-	len = edge_buf_data_avail(eb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = eb->buf_buf + eb->buf_size - eb->buf_get;
-	if (count > len) {
-		memcpy(buf, eb->buf_get, len);
-		memcpy(buf+len, eb->buf_buf, count - len);
-		eb->buf_get = eb->buf_buf + count - len;
-	} else {
-		memcpy(buf, eb->buf_get, count);
-		if (count < len)
-			eb->buf_get += count;
-		else /* count == len */
-			eb->buf_get = eb->buf_buf;
-	}
-
-	return count;
-}
-
-
 static struct usb_serial_driver edgeport_1port_device = {
 	.driver = {
 		.owner		= THIS_MODULE,
diff --git a/drivers/usb/serial/io_ti.h b/drivers/usb/serial/io_ti.h
index cab84f2256b..1bd67b24f91 100644
--- a/drivers/usb/serial/io_ti.h
+++ b/drivers/usb/serial/io_ti.h
@@ -1,4 +1,4 @@
-/*****************************************************************************  
+/*****************************************************************************
  *
  *	Copyright (C) 1997-2002 Inside Out Networks, Inc.
  *
@@ -22,10 +22,10 @@
 #define DTK_ADDR_SPACE_I2C_TYPE_II	0x82	/* Addr is placed in I2C area */
 #define DTK_ADDR_SPACE_I2C_TYPE_III	0x83	/* Addr is placed in I2C area */
 
-// UART Defines
-#define UMPMEM_BASE_UART1		0xFFA0  /* UMP UART1 base address          */
-#define UMPMEM_BASE_UART2		0xFFB0  /* UMP UART2 base address          */
-#define UMPMEM_OFFS_UART_LSR		0x05    /* UMP UART LSR register offset    */
+/* UART Defines */
+#define UMPMEM_BASE_UART1		0xFFA0	/* UMP UART1 base address */
+#define UMPMEM_BASE_UART2		0xFFB0	/* UMP UART2 base address */
+#define UMPMEM_OFFS_UART_LSR		0x05	/* UMP UART LSR register offset */
 
 /* Bits per character */
 #define UMP_UART_CHAR5BITS		0x00
@@ -54,7 +54,7 @@
 #define UMP_UART_LSR_RX_MASK		0x10
 #define UMP_UART_LSR_TX_MASK		0x20
 
-#define UMP_UART_LSR_DATA_MASK		( LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK )
+#define UMP_UART_LSR_DATA_MASK		(LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK)
 
 /* Port Settings Constants) */
 #define UMP_MASK_UART_FLAGS_RTS_FLOW		0x0001
@@ -79,50 +79,57 @@
 #define UMP_PORT_DIR_OUT			0x01
 #define UMP_PORT_DIR_IN				0x02
 
-// Address of Port 0
-#define UMPM_UART1_PORT  			0x03
-
-// Commands
-#define	UMPC_SET_CONFIG 		0x05
-#define	UMPC_OPEN_PORT  		0x06
-#define	UMPC_CLOSE_PORT 		0x07
-#define	UMPC_START_PORT 		0x08
-#define	UMPC_STOP_PORT  		0x09
-#define	UMPC_TEST_PORT  		0x0A
-#define	UMPC_PURGE_PORT 		0x0B
-
-#define	UMPC_COMPLETE_READ		0x80	// Force the Firmware to complete the current Read
-#define	UMPC_HARDWARE_RESET		0x81	// Force UMP back into BOOT Mode
-#define	UMPC_COPY_DNLD_TO_I2C		0x82	// Copy current download image to type 0xf2 record in 16k I2C
-						// firmware will change 0xff record to type 2 record when complete
+/* Address of Port 0 */
+#define UMPM_UART1_PORT				0x03
+
+/* Commands */
+#define	UMPC_SET_CONFIG			0x05
+#define	UMPC_OPEN_PORT			0x06
+#define	UMPC_CLOSE_PORT			0x07
+#define	UMPC_START_PORT			0x08
+#define	UMPC_STOP_PORT			0x09
+#define	UMPC_TEST_PORT			0x0A
+#define	UMPC_PURGE_PORT			0x0B
+
+/* Force the Firmware to complete the current Read */
+#define	UMPC_COMPLETE_READ		0x80
+/* Force UMP back into BOOT Mode */
+#define	UMPC_HARDWARE_RESET		0x81
+/*
+ * Copy current download image to type 0xf2 record in 16k I2C
+ * firmware will change 0xff record to type 2 record when complete
+ */
+#define	UMPC_COPY_DNLD_TO_I2C		0x82
 
-	// Special function register commands
-	// wIndex is register address
-	// wValue is MSB/LSB mask/data
-#define	UMPC_WRITE_SFR	  		0x83	// Write SFR Register
+/*
+ * Special function register commands
+ * wIndex is register address
+ * wValue is MSB/LSB mask/data
+ */
+#define	UMPC_WRITE_SFR			0x83	/* Write SFR Register */
 
-	// wIndex is register address
-#define	UMPC_READ_SFR	  		0x84	// Read SRF Register
+/* wIndex is register address */
+#define	UMPC_READ_SFR			0x84	/* Read SRF Register */
 
-	// Set or Clear DTR (wValue bit 0 Set/Clear)		wIndex ModuleID (port)
+/* Set or Clear DTR (wValue bit 0 Set/Clear)	wIndex ModuleID (port) */
 #define	UMPC_SET_CLR_DTR		0x85
 
-	// Set or Clear RTS (wValue bit 0 Set/Clear)		wIndex ModuleID (port)
+/* Set or Clear RTS (wValue bit 0 Set/Clear)	wIndex ModuleID (port) */
 #define	UMPC_SET_CLR_RTS		0x86
 
-	// Set or Clear LOOPBACK (wValue bit 0 Set/Clear)	wIndex ModuleID (port)
+/* Set or Clear LOOPBACK (wValue bit 0 Set/Clear) wIndex ModuleID (port) */
 #define	UMPC_SET_CLR_LOOPBACK		0x87
 
-	// Set or Clear BREAK (wValue bit 0 Set/Clear)		wIndex ModuleID (port)
+/* Set or Clear BREAK (wValue bit 0 Set/Clear)	wIndex ModuleID (port) */
 #define	UMPC_SET_CLR_BREAK		0x88
 
-	// Read MSR wIndex ModuleID (port)
+/* Read MSR wIndex ModuleID (port) */
 #define	UMPC_READ_MSR			0x89
 
-	/* Toolkit commands */
-	/* Read-write group */
-#define	UMPC_MEMORY_READ   		0x92
-#define	UMPC_MEMORY_WRITE  		0x93
+/* Toolkit commands */
+/* Read-write group */
+#define	UMPC_MEMORY_READ		0x92
+#define	UMPC_MEMORY_WRITE		0x93
 
 /*
  *	UMP DMA Definitions
@@ -130,8 +137,7 @@
 #define UMPD_OEDB1_ADDRESS		0xFF08
 #define UMPD_OEDB2_ADDRESS		0xFF10
 
-struct out_endpoint_desc_block
-{
+struct out_endpoint_desc_block {
 	__u8 Configuration;
 	__u8 XBufAddr;
 	__u8 XByteCount;
@@ -147,8 +153,8 @@ struct out_endpoint_desc_block
  * TYPE DEFINITIONS
  * Structures for Firmware commands
  */
-struct ump_uart_config		/* UART settings                    */
-{
+/* UART settings */
+struct ump_uart_config {
 	__u16 wBaudRate;	/* Baud rate                        */
 	__u16 wFlags;		/* Bitmap mask of flags             */
 	__u8 bDataBits;		/* 5..8 - data bits per character   */
@@ -165,8 +171,8 @@ struct ump_uart_config		/* UART settings                    */
  * TYPE DEFINITIONS
  * Structures for USB interrupts
  */
-struct ump_interrupt			/* Interrupt packet structure       */
-{
+/* Interrupt packet structure */
+struct ump_interrupt {
 	__u8 bICode;			/* Interrupt code (interrupt num)   */
 	__u8 bIInfo;			/* Interrupt information            */
 }  __attribute__((packed));
diff --git a/drivers/usb/serial/io_usbvend.h b/drivers/usb/serial/io_usbvend.h
index 8e1a491e52a..51f83fbb73b 100644
--- a/drivers/usb/serial/io_usbvend.h
+++ b/drivers/usb/serial/io_usbvend.h
@@ -26,7 +26,7 @@
 
 //
 // Definitions of USB product IDs
-// 
+//
 
 #define	USB_VENDOR_ID_ION	0x1608		// Our VID
 #define	USB_VENDOR_ID_TI	0x0451		// TI VID
@@ -54,7 +54,7 @@
 // Product IDs - assigned to match middle digit of serial number (No longer true)
 
 #define ION_DEVICE_ID_80251_NETCHIP	0x020	// This bit is set in the PID if this edgeport hardware$
-						// is based on the 80251+Netchip.  
+						// is based on the 80251+Netchip.
 
 #define ION_DEVICE_ID_GENERATION_1	0x00	// Value for 930 based edgeports
 #define ION_DEVICE_ID_GENERATION_2	0x01	// Value for 80251+Netchip.
@@ -134,7 +134,7 @@
 #define ION_DEVICE_ID_TI_EDGEPORT_416		0x0212  // Edgeport/416
 #define ION_DEVICE_ID_TI_EDGEPORT_1		0x0215	// Edgeport/1 RS232
 #define ION_DEVICE_ID_TI_EDGEPORT_42		0x0217	// Edgeport/42 4 hub 2 RS232
-#define ION_DEVICE_ID_TI_EDGEPORT_22I  		0x021A	// Edgeport/22I is an Edgeport/4 with ports 1&2 RS422 and ports 3&4 RS232
+#define ION_DEVICE_ID_TI_EDGEPORT_22I		0x021A	// Edgeport/22I is an Edgeport/4 with ports 1&2 RS422 and ports 3&4 RS232
 #define ION_DEVICE_ID_TI_EDGEPORT_2C		0x021B	// Edgeport/2c RS232
 #define ION_DEVICE_ID_TI_EDGEPORT_221C		0x021C	// Edgeport/221c is a TI based Edgeport/2 with lucent chip and
 							// 2 external hub ports - Large I2C
@@ -142,7 +142,7 @@
 							// 2 external hub ports - Large I2C
 #define ION_DEVICE_ID_TI_EDGEPORT_21C		0x021E	// Edgeport/21c is a TI based Edgeport/2 with lucent chip
 
-// Generation 3 devices -- 3410 based edgport/1 (256 byte I2C) 
+// Generation 3 devices -- 3410 based edgport/1 (256 byte I2C)
 #define ION_DEVICE_ID_TI_TI3410_EDGEPORT_1	0x0240	// Edgeport/1 RS232
 #define ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I	0x0241	// Edgeport/1i- RS422 model
 
@@ -176,7 +176,7 @@
 							// Default to /P function
 
 #define ION_DEVICE_ID_PLUS_PWR_HP4CD		0x30C	// 5052 Plus Power HubPort/4CD+ (for Dell)
-#define ION_DEVICE_ID_PLUS_PWR_HP4C		0x30D	// 5052 Plus Power HubPort/4C+ 
+#define ION_DEVICE_ID_PLUS_PWR_HP4C		0x30D	// 5052 Plus Power HubPort/4C+
 #define ION_DEVICE_ID_PLUS_PWR_PCI		0x30E	// 3410 Plus Power PCI Host Controller 4 port
 
 
@@ -217,17 +217,17 @@
 #define ION_DEVICE_ID_MT4X56USB			0x1403	// OEM device
 
 
-#define	GENERATION_ID_FROM_USB_PRODUCT_ID( ProductId )				\
-			( (__u16) ((ProductId >> 8) & (ION_GENERATION_MASK)) )
+#define	GENERATION_ID_FROM_USB_PRODUCT_ID(ProductId)				\
+			((__u16) ((ProductId >> 8) & (ION_GENERATION_MASK)))
 
-#define	MAKE_USB_PRODUCT_ID( OemId, DeviceId )					\
-			( (__u16) (((OemId) << 10) || (DeviceId)) )
+#define	MAKE_USB_PRODUCT_ID(OemId, DeviceId)					\
+			((__u16) (((OemId) << 10) || (DeviceId)))
 
-#define	DEVICE_ID_FROM_USB_PRODUCT_ID( ProductId )				\
-			( (__u16) ((ProductId) & (EDGEPORT_DEVICE_ID_MASK)) )
+#define	DEVICE_ID_FROM_USB_PRODUCT_ID(ProductId)				\
+			((__u16) ((ProductId) & (EDGEPORT_DEVICE_ID_MASK)))
 
-#define	OEM_ID_FROM_USB_PRODUCT_ID( ProductId )					\
-			( (__u16) (((ProductId) >> 10) & 0x3F) )
+#define	OEM_ID_FROM_USB_PRODUCT_ID(ProductId)					\
+			((__u16) (((ProductId) >> 10) & 0x3F))
 
 //
 // Definitions of parameters for download code. Note that these are
@@ -237,7 +237,7 @@
 
 // TxCredits value below which driver won't bother sending (to prevent too many small writes).
 // Send only if above 25%
-#define EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(InitialCredit, MaxPacketSize) (max( ((InitialCredit) / 4), (MaxPacketSize) ))
+#define EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(InitialCredit, MaxPacketSize) (max(((InitialCredit) / 4), (MaxPacketSize)))
 
 #define	EDGE_FW_BULK_MAX_PACKET_SIZE		64	// Max Packet Size for Bulk In Endpoint (EP1)
 #define EDGE_FW_BULK_READ_BUFFER_SIZE		1024	// Size to use for Bulk reads
@@ -263,7 +263,7 @@
 //		wValue = 16-bit address
 //		wIndex = unused (though we could put segment 00: or FF: here)
 //		wLength = # bytes to read/write (max 64)
-//							
+//
 
 #define USB_REQUEST_ION_RESET_DEVICE	0	// Warm reboot Edgeport, retaining USB address
 #define USB_REQUEST_ION_GET_EPIC_DESC	1	// Get Edgeport Compatibility Descriptor
@@ -278,7 +278,7 @@
 #define USB_REQUEST_ION_ENABLE_SUSPEND	9	// Enable/Disable suspend feature
 						// (wValue != 0: Enable; wValue = 0: Disable)
 
-#define USB_REQUEST_ION_SEND_IOSP	10	// Send an IOSP command to the edgeport over the control pipe	
+#define USB_REQUEST_ION_SEND_IOSP	10	// Send an IOSP command to the edgeport over the control pipe
 #define USB_REQUEST_ION_RECV_IOSP	11	// Receive an IOSP command from the edgeport over the control pipe
 
 
@@ -301,8 +301,7 @@
 // this is a "real" Edgeport.
 //
 
-struct edge_compatibility_bits
-{
+struct edge_compatibility_bits {
 	// This __u32 defines which Vendor-specific commands/functionality
 	// the device supports on the default EP0 pipe.
 
@@ -334,24 +333,22 @@ struct edge_compatibility_bits
 	__u32	TrueEdgeport		:  1;	// 0001	Set if device is a 'real' Edgeport
 											// (Used only by driver, NEVER set by an EPiC device)
 	__u32	GenUnused		: 31;	// Available for future expansion, must be 0
-
 };
 
 #define EDGE_COMPATIBILITY_MASK0	0x0001
 #define EDGE_COMPATIBILITY_MASK1	0x3FFF
 #define EDGE_COMPATIBILITY_MASK2	0x0001
 
-struct edge_compatibility_descriptor
-{
+struct edge_compatibility_descriptor {
 	__u8	Length;				// Descriptor Length (per USB spec)
 	__u8	DescType;			// Descriptor Type (per USB spec, =DEVICE type)
 	__u8	EpicVer;			// Version of EPiC spec supported
-											// (Currently must be 1)
+						// (Currently must be 1)
 	__u8	NumPorts;			// Number of serial ports supported
 	__u8	iDownloadFile;			// Index of string containing download code filename
-											// 0=no download, FF=download compiled into driver.
-	__u8	Unused[ 3 ];			// Available for future expansion, must be 0
-											// (Currently must be 0).
+						// 0=no download, FF=download compiled into driver.
+	__u8	Unused[3];			// Available for future expansion, must be 0
+						// (Currently must be 0).
 	__u8	MajorVersion;			// Firmware version: xx.
 	__u8	MinorVersion;			//  yy.
 	__le16	BuildNumber;			//  zzzz (LE format)
@@ -359,9 +356,7 @@ struct edge_compatibility_descriptor
 	// The following structure contains __u32s, with each bit
 	// specifying whether the EPiC device supports the given
 	// command or functionality.
-
 	struct edge_compatibility_bits	Supports;
-
 };
 
 // Values for iDownloadFile
@@ -391,8 +386,8 @@ struct edge_compatibility_descriptor
 
 // Define the max block size that may be read or written
 // in a read/write RAM/ROM command.
-#define	MAX_SIZE_REQ_ION_READ_MEM	( (__u16) 64 )
-#define	MAX_SIZE_REQ_ION_WRITE_MEM	( (__u16) 64 )
+#define	MAX_SIZE_REQ_ION_READ_MEM	((__u16)64)
+#define	MAX_SIZE_REQ_ION_WRITE_MEM	((__u16)64)
 
 
 //
@@ -545,7 +540,7 @@ struct edge_boot_descriptor {
 	__u8		MajorVersion;		// C6 Firmware version: xx.
 	__u8		MinorVersion;		// C7			yy.
 	__le16		BuildNumber;		// C8			zzzz (LE format)
-	
+
 	__u16		EnumRootDescTable;	// CA Root of ROM-based descriptor table
 	__u8		NumDescTypes;		// CC Number of supported descriptor types
 
@@ -597,41 +592,36 @@ struct edge_boot_descriptor {
 #define I2C_DESC_TYPE_ION		0	// Not defined by TI
 
 
-struct ti_i2c_desc
-{
+struct ti_i2c_desc {
 	__u8	Type;			// Type of descriptor
 	__u16	Size;			// Size of data only not including header
 	__u8	CheckSum;		// Checksum (8 bit sum of data only)
 	__u8	Data[0];		// Data starts here
-}__attribute__((packed));
+} __attribute__((packed));
 
 // for 5152 devices only (type 2 record)
 // for 3410 the version is stored in the WATCHPORT_FIRMWARE_VERSION descriptor
-struct ti_i2c_firmware_rec
-{
+struct ti_i2c_firmware_rec {
 	__u8	Ver_Major;		// Firmware Major version number
 	__u8	Ver_Minor;		// Firmware Minor version number
 	__u8	Data[0];		// Download starts here
-}__attribute__((packed));
+} __attribute__((packed));
 
 
-struct watchport_firmware_version
-{
+struct watchport_firmware_version {
 // Added 2 bytes for version number
 	__u8	Version_Major;		//  Download Version (for Watchport)
 	__u8	Version_Minor;
-}__attribute__((packed));
+} __attribute__((packed));
 
 
 // Structure of header of download image in fw_down.h
-struct ti_i2c_image_header
-{
+struct ti_i2c_image_header {
 	__le16	Length;
 	__u8	CheckSum;
-}__attribute__((packed));
+} __attribute__((packed));
 
-struct ti_basic_descriptor
-{
+struct ti_basic_descriptor {
 	__u8	Power;		// Self powered
 				// bit 7: 1 - power switching supported
 				//        0 - power switching not supported
@@ -663,9 +653,9 @@ struct ti_basic_descriptor
 #define TI_I2C_SIZE_MASK		0x1f  // 5 bits
 #define TI_GET_I2C_SIZE(x)		((((x) & TI_I2C_SIZE_MASK)+1)*256)
 
-#define TI_MAX_I2C_SIZE			( 16 * 1024 )
+#define TI_MAX_I2C_SIZE			(16 * 1024)
 
-#define TI_MANUF_VERSION_0		0	
+#define TI_MANUF_VERSION_0		0
 
 // IonConig2 flags
 #define TI_CONFIG2_RS232		0x01
@@ -676,8 +666,7 @@ struct ti_basic_descriptor
 #define TI_CONFIG2_WATCHPORT		0x10
 
 
-struct edge_ti_manuf_descriptor
-{
+struct edge_ti_manuf_descriptor {
 	__u8 IonConfig;		//  Config byte for ION manufacturing use
 	__u8 IonConfig2;	//  Expansion
 	__u8 Version;		//  Version
@@ -688,7 +677,7 @@ struct edge_ti_manuf_descriptor
 	__u8 HubConfig2;	//  Used to configure the Hub
 	__u8 TotalPorts;	//  Total Number of Com Ports for the entire device (All UMPs)
 	__u8 Reserved;		//  Reserved
-}__attribute__((packed));
+} __attribute__((packed));
 
 
 #endif		// if !defined(_USBVEND_H)
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 3fea9298eb1..28913fa95fb 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -56,7 +56,6 @@
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
-#include "ipaq.h"
 
 #define KP_RETRIES	100
 
@@ -64,7 +63,7 @@
  * Version Information
  */
 
-#define DRIVER_VERSION "v0.5"
+#define DRIVER_VERSION "v1.0"
 #define DRIVER_AUTHOR "Ganesh Varadarajan <ganesh@veritas.com>"
 #define DRIVER_DESC "USB PocketPC PDA driver"
 
@@ -76,20 +75,8 @@ static int initial_wait;
 /* Function prototypes for an ipaq */
 static int  ipaq_open(struct tty_struct *tty,
 			struct usb_serial_port *port);
-static void ipaq_close(struct usb_serial_port *port);
 static int  ipaq_calc_num_ports(struct usb_serial *serial);
 static int  ipaq_startup(struct usb_serial *serial);
-static int ipaq_write(struct tty_struct *tty, struct usb_serial_port *port,
-			const unsigned char *buf, int count);
-static int ipaq_write_bulk(struct usb_serial_port *port,
-				const unsigned char *buf, int count);
-static void ipaq_write_gather(struct usb_serial_port *port);
-static void ipaq_read_bulk_callback(struct urb *urb);
-static void ipaq_write_bulk_callback(struct urb *urb);
-static int ipaq_write_room(struct tty_struct *tty);
-static int ipaq_chars_in_buffer(struct tty_struct *tty);
-static void ipaq_destroy_lists(struct usb_serial_port *port);
-
 
 static struct usb_device_id ipaq_id_table [] = {
 	/* The first entry is a placeholder for the insmod-specified device */
@@ -558,7 +545,7 @@ static struct usb_driver ipaq_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	ipaq_id_table,
-	.no_dynamic_id = 	1,
+	.no_dynamic_id =	1,
 };
 
 
@@ -569,91 +556,24 @@ static struct usb_serial_driver ipaq_device = {
 		.name =		"ipaq",
 	},
 	.description =		"PocketPC PDA",
-	.usb_driver = 		&ipaq_driver,
+	.usb_driver =		&ipaq_driver,
 	.id_table =		ipaq_id_table,
+	.bulk_in_size =		256,
+	.bulk_out_size =	256,
 	.open =			ipaq_open,
-	.close =		ipaq_close,
 	.attach =		ipaq_startup,
 	.calc_num_ports =	ipaq_calc_num_ports,
-	.write =		ipaq_write,
-	.write_room =		ipaq_write_room,
-	.chars_in_buffer =	ipaq_chars_in_buffer,
-	.read_bulk_callback =	ipaq_read_bulk_callback,
-	.write_bulk_callback =	ipaq_write_bulk_callback,
 };
 
-static spinlock_t	write_list_lock;
-static int		bytes_in;
-static int		bytes_out;
-
 static int ipaq_open(struct tty_struct *tty,
 			struct usb_serial_port *port)
 {
 	struct usb_serial	*serial = port->serial;
-	struct ipaq_private	*priv;
-	struct ipaq_packet	*pkt;
-	int			i, result = 0;
+	int			result = 0;
 	int			retries = connect_retries;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	bytes_in = 0;
-	bytes_out = 0;
-	priv = kmalloc(sizeof(struct ipaq_private), GFP_KERNEL);
-	if (priv == NULL) {
-		dev_err(&port->dev, "%s - Out of memory\n", __func__);
-		return -ENOMEM;
-	}
-	usb_set_serial_port_data(port, priv);
-	priv->active = 0;
-	priv->queue_len = 0;
-	priv->free_len = 0;
-	INIT_LIST_HEAD(&priv->queue);
-	INIT_LIST_HEAD(&priv->freelist);
-
-	for (i = 0; i < URBDATA_QUEUE_MAX / PACKET_SIZE; i++) {
-		pkt = kmalloc(sizeof(struct ipaq_packet), GFP_KERNEL);
-		if (pkt == NULL)
-			goto enomem;
-
-		pkt->data = kmalloc(PACKET_SIZE, GFP_KERNEL);
-		if (pkt->data == NULL) {
-			kfree(pkt);
-			goto enomem;
-		}
-		pkt->len = 0;
-		pkt->written = 0;
-		INIT_LIST_HEAD(&pkt->list);
-		list_add(&pkt->list, &priv->freelist);
-		priv->free_len += PACKET_SIZE;
-	}
-
-	/*
-	 * Lose the small buffers usbserial provides. Make larger ones.
-	 */
-
-	kfree(port->bulk_in_buffer);
-	kfree(port->bulk_out_buffer);
-	/* make sure the generic serial code knows */
-	port->bulk_out_buffer = NULL;
-
-	port->bulk_in_buffer = kmalloc(URBDATA_SIZE, GFP_KERNEL);
-	if (port->bulk_in_buffer == NULL)
-		goto enomem;
-
-	port->bulk_out_buffer = kmalloc(URBDATA_SIZE, GFP_KERNEL);
-	if (port->bulk_out_buffer == NULL) {
-		/* the buffer is useless, free it */
-		kfree(port->bulk_in_buffer);
-		port->bulk_in_buffer = NULL;
-		goto enomem;
-	}
-	port->read_urb->transfer_buffer = port->bulk_in_buffer;
-	port->write_urb->transfer_buffer = port->bulk_out_buffer;
-	port->read_urb->transfer_buffer_length = URBDATA_SIZE;
-	port->bulk_out_size = port->write_urb->transfer_buffer_length
-							= URBDATA_SIZE;
-
 	msleep(1000*initial_wait);
 
 	/*
@@ -663,7 +583,6 @@ static int ipaq_open(struct tty_struct *tty,
 	 * through. Since this has a reasonably high failure rate, we retry
 	 * several times.
 	 */
-
 	while (retries--) {
 		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0), 0x22, 0x21,
@@ -673,269 +592,15 @@ static int ipaq_open(struct tty_struct *tty,
 
 		msleep(1000);
 	}
-
 	if (!retries && result) {
-		dev_err(&port->dev, "%s - failed doing control urb, error %d\n",			__func__, result);
-		goto error;
-	}
-
-	/* Start reading from the device */
-	usb_fill_bulk_urb(port->read_urb, serial->dev,
-		usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
-		port->read_urb->transfer_buffer,
-		port->read_urb->transfer_buffer_length,
-		ipaq_read_bulk_callback, port);
-
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result) {
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-			__func__, result);
-		goto error;
-	}
-
-	return 0;
-
-enomem:
-	result = -ENOMEM;
-	dev_err(&port->dev, "%s - Out of memory\n", __func__);
-error:
-	ipaq_destroy_lists(port);
-	kfree(priv);
-	return result;
-}
-
-
-static void ipaq_close(struct usb_serial_port *port)
-{
-	struct ipaq_private	*priv = usb_get_serial_port_data(port);
-
-	dbg("%s - port %d", __func__, port->number);
-
-	/*
-	 * shut down bulk read and write
-	 */
-	usb_kill_urb(port->write_urb);
-	usb_kill_urb(port->read_urb);
-	ipaq_destroy_lists(port);
-	kfree(priv);
-	usb_set_serial_port_data(port, NULL);
-
-	/* Uncomment the following line if you want to see some statistics
-	 * in your syslog */
-	/* info ("Bytes In = %d  Bytes Out = %d", bytes_in, bytes_out); */
-}
-
-static void ipaq_read_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port	*port = urb->context;
-	struct tty_struct	*tty;
-	unsigned char		*data = urb->transfer_buffer;
-	int			result;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status) {
-		dbg("%s - nonzero read bulk status received: %d",
-		    __func__, status);
-		return;
-	}
-
-	usb_serial_debug_data(debug, &port->dev, __func__,
-						urb->actual_length, data);
-
-	tty = tty_port_tty_get(&port->port);
-	if (tty && urb->actual_length) {
-		tty_insert_flip_string(tty, data, urb->actual_length);
-		tty_flip_buffer_push(tty);
-		bytes_in += urb->actual_length;
-	}
-	tty_kref_put(tty);
-
-	/* Continue trying to always read  */
-	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-	    usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress),
-	    port->read_urb->transfer_buffer,
-	    port->read_urb->transfer_buffer_length,
-	    ipaq_read_bulk_callback, port);
-	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed resubmitting read urb, error %d\n",
-			__func__, result);
-	return;
-}
-
-static int ipaq_write(struct tty_struct *tty, struct usb_serial_port *port,
-			const unsigned char *buf, int count)
-{
-	const unsigned char	*current_position = buf;
-	int			bytes_sent = 0;
-	int			transfer_size;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	while (count > 0) {
-		transfer_size = min(count, PACKET_SIZE);
-		if (ipaq_write_bulk(port, current_position, transfer_size))
-			break;
-		current_position += transfer_size;
-		bytes_sent += transfer_size;
-		count -= transfer_size;
-		bytes_out += transfer_size;
+		dev_err(&port->dev, "%s - failed doing control urb, error %d\n",
+							__func__, result);
+		return result;
 	}
 
-	return bytes_sent;
+	return usb_serial_generic_open(tty, port);
 }
 
-static int ipaq_write_bulk(struct usb_serial_port *port,
-					const unsigned char *buf, int count)
-{
-	struct ipaq_private	*priv = usb_get_serial_port_data(port);
-	struct ipaq_packet	*pkt = NULL;
-	int			result = 0;
-	unsigned long		flags;
-
-	if (priv->free_len <= 0) {
-		dbg("%s - we're stuffed", __func__);
-		return -EAGAIN;
-	}
-
-	spin_lock_irqsave(&write_list_lock, flags);
-	if (!list_empty(&priv->freelist)) {
-		pkt = list_entry(priv->freelist.next, struct ipaq_packet, list);
-		list_del(&pkt->list);
-		priv->free_len -= PACKET_SIZE;
-	}
-	spin_unlock_irqrestore(&write_list_lock, flags);
-	if (pkt == NULL) {
-		dbg("%s - we're stuffed", __func__);
-		return -EAGAIN;
-	}
-
-	memcpy(pkt->data, buf, count);
-	usb_serial_debug_data(debug, &port->dev, __func__, count, pkt->data);
-
-	pkt->len = count;
-	pkt->written = 0;
-	spin_lock_irqsave(&write_list_lock, flags);
-	list_add_tail(&pkt->list, &priv->queue);
-	priv->queue_len += count;
-	if (priv->active == 0) {
-		priv->active = 1;
-		ipaq_write_gather(port);
-		spin_unlock_irqrestore(&write_list_lock, flags);
-		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-		if (result)
-			dev_err(&port->dev,
-				"%s - failed submitting write urb, error %d\n",
-				__func__, result);
-	} else {
-		spin_unlock_irqrestore(&write_list_lock, flags);
-	}
-	return result;
-}
-
-static void ipaq_write_gather(struct usb_serial_port *port)
-{
-	struct ipaq_private	*priv = usb_get_serial_port_data(port);
-	struct usb_serial	*serial = port->serial;
-	int			count, room;
-	struct ipaq_packet	*pkt, *tmp;
-	struct urb		*urb = port->write_urb;
-
-	room = URBDATA_SIZE;
-	list_for_each_entry_safe(pkt, tmp, &priv->queue, list) {
-		count = min(room, (int)(pkt->len - pkt->written));
-		memcpy(urb->transfer_buffer + (URBDATA_SIZE - room),
-		       pkt->data + pkt->written, count);
-		room -= count;
-		pkt->written += count;
-		priv->queue_len -= count;
-		if (pkt->written == pkt->len) {
-			list_move(&pkt->list, &priv->freelist);
-			priv->free_len += PACKET_SIZE;
-		}
-		if (room == 0)
-			break;
-	}
-
-	count = URBDATA_SIZE - room;
-	usb_fill_bulk_urb(port->write_urb, serial->dev,
-		usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress),
-		port->write_urb->transfer_buffer, count,
-		ipaq_write_bulk_callback, port);
-	return;
-}
-
-static void ipaq_write_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port	*port = urb->context;
-	struct ipaq_private	*priv = usb_get_serial_port_data(port);
-	unsigned long		flags;
-	int			result;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status) {
-		dbg("%s - nonzero write bulk status received: %d",
-		    __func__, status);
-		return;
-	}
-
-	spin_lock_irqsave(&write_list_lock, flags);
-	if (!list_empty(&priv->queue)) {
-		ipaq_write_gather(port);
-		spin_unlock_irqrestore(&write_list_lock, flags);
-		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-		if (result)
-			dev_err(&port->dev,
-				"%s - failed submitting write urb, error %d\n",
-				__func__, result);
-	} else {
-		priv->active = 0;
-		spin_unlock_irqrestore(&write_list_lock, flags);
-	}
-
-	usb_serial_port_softint(port);
-}
-
-static int ipaq_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ipaq_private	*priv = usb_get_serial_port_data(port);
-
-	dbg("%s - freelen %d", __func__, priv->free_len);
-	return priv->free_len;
-}
-
-static int ipaq_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ipaq_private	*priv = usb_get_serial_port_data(port);
-
-	dbg("%s - queuelen %d", __func__, priv->queue_len);
-	return priv->queue_len;
-}
-
-static void ipaq_destroy_lists(struct usb_serial_port *port)
-{
-	struct ipaq_private	*priv = usb_get_serial_port_data(port);
-	struct ipaq_packet	*pkt, *tmp;
-
-	list_for_each_entry_safe(pkt, tmp, &priv->queue, list) {
-		kfree(pkt->data);
-		kfree(pkt);
-	}
-	list_for_each_entry_safe(pkt, tmp, &priv->freelist, list) {
-		kfree(pkt->data);
-		kfree(pkt);
-	}
-}
-
-
 static int ipaq_calc_num_ports(struct usb_serial *serial)
 {
 	/*
@@ -994,7 +659,6 @@ static int ipaq_startup(struct usb_serial *serial)
 static int __init ipaq_init(void)
 {
 	int retval;
-	spin_lock_init(&write_list_lock);
 	retval = usb_serial_register(&ipaq_device);
 	if (retval)
 		goto failed_usb_serial_register;
@@ -1015,7 +679,6 @@ failed_usb_serial_register:
 	return retval;
 }
 
-
 static void __exit ipaq_exit(void)
 {
 	usb_deregister(&ipaq_driver);
diff --git a/drivers/usb/serial/ipaq.h b/drivers/usb/serial/ipaq.h
deleted file mode 100644
index 2b9035918b8..00000000000
--- a/drivers/usb/serial/ipaq.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * USB Compaq iPAQ driver
- *
- *	Copyright (C) 2001 - 2002
- *	    Ganesh Varadarajan <ganesh@veritas.com>
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- */
-
-#ifndef __LINUX_USB_SERIAL_IPAQ_H
-#define __LINUX_USB_SERIAL_IPAQ_H
-
-/*
- * Since we can't queue our bulk write urbs (don't know why - it just
- * doesn't work), we can send down only one write urb at a time. The simplistic
- * approach taken by the generic usbserial driver will work, but it's not good
- * for performance. Therefore, we buffer upto URBDATA_QUEUE_MAX bytes of write
- * requests coming from the line discipline. This is done by chaining them
- * in lists of struct ipaq_packet, each packet holding a maximum of
- * PACKET_SIZE bytes.
- *
- * ipaq_write() can be called from bottom half context; hence we can't
- * allocate memory for packets there. So we initialize a pool of packets at
- * the first open and maintain a freelist.
- *
- * The value of PACKET_SIZE was empirically determined by
- * checking the maximum write sizes sent down by the ppp ldisc.
- * URBDATA_QUEUE_MAX is set to 64K, which is the maximum TCP window size.
- */
-
-struct ipaq_packet {
-	char			*data;
-	size_t			len;
-	size_t			written;
-	struct list_head	list;
-};
-
-struct ipaq_private {
-	int			active;
-	int			queue_len;
-	int			free_len;
-	struct list_head	queue;
-	struct list_head	freelist;
-};
-
-#define URBDATA_SIZE		4096
-#define URBDATA_QUEUE_MAX	(64 * 1024)
-#define PACKET_SIZE		256
-
-#endif
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index e1d07840cee..ca77e88836b 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -34,7 +34,6 @@
  * DCD, DTR, RTS, CTS which are currently faked.
  * It's good enough for PPP at this point. It's based off all kinds of
  * code found in usb/serial and usb/class
- *
  */
 
 #include <linux/kernel.h>
@@ -52,7 +51,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION	"v0.3"
+#define DRIVER_VERSION	"v0.4"
 #define DRIVER_AUTHOR	"Roelf Diedericks"
 #define DRIVER_DESC	"IPWireless tty driver"
 
@@ -65,8 +64,6 @@
 /* Message sizes */
 #define EVENT_BUFFER_SIZE	0xFF
 #define CHAR2INT16(c1, c0)	(((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff))
-#define NUM_BULK_URBS		24
-#define NUM_CONTROL_URBS	16
 
 /* vendor/product pairs that are known work with this driver*/
 #define IPW_VID		0x0bc3
@@ -151,47 +148,6 @@ static struct usb_driver usb_ipw_driver = {
 
 static int debug;
 
-static void ipw_read_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	unsigned char *data = urb->transfer_buffer;
-	struct tty_struct *tty;
-	int result;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status) {
-		dbg("%s - nonzero read bulk status received: %d",
-		    __func__, status);
-		return;
-	}
-
-	usb_serial_debug_data(debug, &port->dev, __func__,
-					urb->actual_length, data);
-
-	tty = tty_port_tty_get(&port->port);
-	if (tty && urb->actual_length) {
-		tty_insert_flip_string(tty, data, urb->actual_length);
-		tty_flip_buffer_push(tty);
-	}
-	tty_kref_put(tty);
-
-	/* Continue trying to always read  */
-	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-			  usb_rcvbulkpipe(port->serial->dev,
-					   port->bulk_in_endpointAddress),
-			  port->read_urb->transfer_buffer,
-			  port->read_urb->transfer_buffer_length,
-			  ipw_read_bulk_callback, port);
-	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed resubmitting read urb, error %d\n",
-							__func__, result);
-	return;
-}
-
 static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_device *dev = port->serial->dev;
@@ -229,15 +185,7 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	/*--2: Start reading from the device */
 	dbg("%s: setting up bulk read callback", __func__);
-	usb_fill_bulk_urb(port->read_urb, dev,
-			  usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
-			  port->bulk_in_buffer,
-			  port->bulk_in_size,
-			  ipw_read_bulk_callback, port);
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result < 0)
-		dbg("%s - usb_submit_urb(read bulk) failed with status %d",
-							__func__, result);
+	usb_serial_generic_open(tty, port);
 
 	/*--3: Tell the modem to open the floodgates on the rx bulk channel */
 	dbg("%s:asking modem for RxRead (RXBULK_ON)", __func__);
@@ -267,35 +215,6 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)
 		dev_err(&port->dev,
 			"initial flowcontrol failed (error = %d)\n", result);
 
-
-	/*--5: raise the dtr */
-	dbg("%s:raising dtr", __func__);
-	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-			 IPW_SIO_SET_PIN,
-			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
-			 IPW_PIN_SETDTR,
-			 0,
-			 NULL,
-			 0,
-			 200000);
-	if (result < 0)
-		dev_err(&port->dev,
-				"setting dtr failed (error = %d)\n", result);
-
-	/*--6: raise the rts */
-	dbg("%s:raising rts", __func__);
-	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-			 IPW_SIO_SET_PIN,
-			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
-			 IPW_PIN_SETRTS,
-			 0,
-			 NULL,
-			 0,
-			 200000);
-	if (result < 0)
-		dev_err(&port->dev,
-				"setting dtr failed (error = %d)\n", result);
-
 	kfree(buf_flow_init);
 	return 0;
 }
@@ -305,8 +224,8 @@ static void ipw_dtr_rts(struct usb_serial_port *port, int on)
 	struct usb_device *dev = port->serial->dev;
 	int result;
 
-	/*--1: drop the dtr */
-	dbg("%s:dropping dtr", __func__);
+	dbg("%s: on = %d", __func__, on);
+
 	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 			 IPW_SIO_SET_PIN,
 			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
@@ -316,22 +235,20 @@ static void ipw_dtr_rts(struct usb_serial_port *port, int on)
 			 0,
 			 200000);
 	if (result < 0)
-		dev_err(&port->dev, "dropping dtr failed (error = %d)\n",
+		dev_err(&port->dev, "setting dtr failed (error = %d)\n",
 								result);
 
-	/*--2: drop the rts */
-	dbg("%s:dropping rts", __func__);
 	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 			 IPW_SIO_SET_PIN, USB_TYPE_VENDOR |
-			 		USB_RECIP_INTERFACE | USB_DIR_OUT,
+					USB_RECIP_INTERFACE | USB_DIR_OUT,
 			 on ? IPW_PIN_SETRTS : IPW_PIN_CLRRTS,
 			 0,
 			 NULL,
 			 0,
 			 200000);
 	if (result < 0)
-		dev_err(&port->dev,
-				"dropping rts failed (error = %d)\n", result);
+		dev_err(&port->dev, "setting rts failed (error = %d)\n",
+								result);
 }
 
 static void ipw_close(struct usb_serial_port *port)
@@ -368,83 +285,7 @@ static void ipw_close(struct usb_serial_port *port)
 		dev_err(&port->dev,
 			"Disabling bulk RxRead failed (error = %d)\n", result);
 
-	/* shutdown any in-flight urbs that we know about */
-	usb_kill_urb(port->read_urb);
-	usb_kill_urb(port->write_urb);
-}
-
-static void ipw_write_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	int status = urb->status;
-
-	dbg("%s", __func__);
-
-	port->write_urb_busy = 0;
-
-	if (status)
-		dbg("%s - nonzero write bulk status received: %d",
-		    __func__, status);
-
-	usb_serial_port_softint(port);
-}
-
-static int ipw_write(struct tty_struct *tty, struct usb_serial_port *port,
-					const unsigned char *buf, int count)
-{
-	struct usb_device *dev = port->serial->dev;
-	int ret;
-
-	dbg("%s: TOP: count=%d, in_interrupt=%ld", __func__,
-		count, in_interrupt());
-
-	if (count == 0) {
-		dbg("%s - write request of 0 bytes", __func__);
-		return 0;
-	}
-
-	spin_lock_bh(&port->lock);
-	if (port->write_urb_busy) {
-		spin_unlock_bh(&port->lock);
-		dbg("%s - already writing", __func__);
-		return 0;
-	}
-	port->write_urb_busy = 1;
-	spin_unlock_bh(&port->lock);
-
-	count = min(count, port->bulk_out_size);
-	memcpy(port->bulk_out_buffer, buf, count);
-
-	dbg("%s count now:%d", __func__, count);
-
-	usb_fill_bulk_urb(port->write_urb, dev,
-			  usb_sndbulkpipe(dev, port->bulk_out_endpointAddress),
-			  port->write_urb->transfer_buffer,
-			  count,
-			  ipw_write_bulk_callback,
-			  port);
-
-	ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-	if (ret != 0) {
-		port->write_urb_busy = 0;
-		dbg("%s - usb_submit_urb(write bulk) failed with error = %d",
-								__func__, ret);
-		return ret;
-	}
-
-	dbg("%s returning %d", __func__, count);
-	return count;
-}
-
-static int ipw_probe(struct usb_serial_port *port)
-{
-	return 0;
-}
-
-static int ipw_disconnect(struct usb_serial_port *port)
-{
-	usb_set_serial_port_data(port, NULL);
-	return 0;
+	usb_serial_generic_close(port);
 }
 
 static struct usb_serial_driver ipw_device = {
@@ -453,17 +294,12 @@ static struct usb_serial_driver ipw_device = {
 		.name =		"ipw",
 	},
 	.description =		"IPWireless converter",
-	.usb_driver = 		&usb_ipw_driver,
+	.usb_driver =		&usb_ipw_driver,
 	.id_table =		usb_ipw_ids,
 	.num_ports =		1,
 	.open =			ipw_open,
 	.close =		ipw_close,
 	.dtr_rts =		ipw_dtr_rts,
-	.port_probe = 		ipw_probe,
-	.port_remove =		ipw_disconnect,
-	.write =		ipw_write,
-	.write_bulk_callback =	ipw_write_bulk_callback,
-	.read_bulk_callback =	ipw_read_bulk_callback,
 };
 
 
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 4a0f5197423..ccbce4066d0 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -3,6 +3,7 @@
  *
  *	Copyright (C) 2001-2002	Greg Kroah-Hartman (greg@kroah.com)
  *	Copyright (C) 2002	Gary Brubaker (xavyer@ix.netcom.com)
+ *	Copyright (C) 2010	Johan Hovold (jhovold@gmail.com)
  *
  *	This program is free software; you can redistribute it and/or modify
  *	it under the terms of the GNU General Public License as published by
@@ -72,8 +73,8 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v0.4"
-#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>"
+#define DRIVER_VERSION "v0.5"
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Johan Hovold <jhovold@gmail.com>"
 #define DRIVER_DESC "USB IR Dongle driver"
 
 static int debug;
@@ -87,11 +88,9 @@ static int xbof = -1;
 
 static int  ir_startup (struct usb_serial *serial);
 static int  ir_open(struct tty_struct *tty, struct usb_serial_port *port);
-static void ir_close(struct usb_serial_port *port);
-static int  ir_write(struct tty_struct *tty, struct usb_serial_port *port,
-					const unsigned char *buf, int count);
-static void ir_write_bulk_callback (struct urb *urb);
-static void ir_read_bulk_callback (struct urb *urb);
+static int ir_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size);
+static void ir_process_read_urb(struct urb *urb);
 static void ir_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios);
 
@@ -130,10 +129,8 @@ static struct usb_serial_driver ir_device = {
 	.set_termios		= ir_set_termios,
 	.attach			= ir_startup,
 	.open			= ir_open,
-	.close			= ir_close,
-	.write			= ir_write,
-	.write_bulk_callback	= ir_write_bulk_callback,
-	.read_bulk_callback	= ir_read_bulk_callback,
+	.prepare_write_buffer	= ir_prepare_write_buffer,
+	.process_read_urb	= ir_process_read_urb,
 };
 
 static inline void irda_usb_dump_class_desc(struct usb_irda_cs_descriptor *desc)
@@ -198,7 +195,6 @@ error:
 	return NULL;
 }
 
-
 static u8 ir_xbof_change(u8 xbof)
 {
 	u8 result;
@@ -237,7 +233,6 @@ static u8 ir_xbof_change(u8 xbof)
 	return(result);
 }
 
-
 static int ir_startup(struct usb_serial *serial)
 {
 	struct usb_irda_cs_descriptor *irda_desc;
@@ -297,83 +292,22 @@ static int ir_startup(struct usb_serial *serial)
 
 static int ir_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
-	char *buffer;
-	int result = 0;
+	int i;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (buffer_size) {
-		/* override the default buffer sizes */
-		buffer = kmalloc(buffer_size, GFP_KERNEL);
-		if (!buffer) {
-			dev_err(&port->dev, "%s - out of memory.\n", __func__);
-			return -ENOMEM;
-		}
-		kfree(port->read_urb->transfer_buffer);
-		port->read_urb->transfer_buffer = buffer;
-		port->read_urb->transfer_buffer_length = buffer_size;
-
-		buffer = kmalloc(buffer_size, GFP_KERNEL);
-		if (!buffer) {
-			dev_err(&port->dev, "%s - out of memory.\n", __func__);
-			return -ENOMEM;
-		}
-		kfree(port->write_urb->transfer_buffer);
-		port->write_urb->transfer_buffer = buffer;
-		port->write_urb->transfer_buffer_length = buffer_size;
-		port->bulk_out_size = buffer_size;
-	}
+	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
+		port->write_urbs[i]->transfer_flags = URB_ZERO_PACKET;
 
 	/* Start reading from the device */
-	usb_fill_bulk_urb(
-		port->read_urb,
-		port->serial->dev,
-		usb_rcvbulkpipe(port->serial->dev,
-			port->bulk_in_endpointAddress),
-		port->read_urb->transfer_buffer,
-		port->read_urb->transfer_buffer_length,
-		ir_read_bulk_callback,
-		port);
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-			__func__, result);
-
-	return result;
+	return usb_serial_generic_open(tty, port);
 }
 
-static void ir_close(struct usb_serial_port *port)
+static int ir_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size)
 {
-	dbg("%s - port %d", __func__, port->number);
-
-	/* shutdown our bulk read */
-	usb_kill_urb(port->read_urb);
-}
-
-static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
-					const unsigned char *buf, int count)
-{
-	unsigned char *transfer_buffer;
-	int result;
-	int transfer_size;
-
-	dbg("%s - port = %d, count = %d", __func__, port->number, count);
-
-	if (count == 0)
-		return 0;
-
-	spin_lock_bh(&port->lock);
-	if (port->write_urb_busy) {
-		spin_unlock_bh(&port->lock);
-		dbg("%s - already writing", __func__);
-		return 0;
-	}
-	port->write_urb_busy = 1;
-	spin_unlock_bh(&port->lock);
-
-	transfer_buffer = port->write_urb->transfer_buffer;
-	transfer_size = min(count, port->bulk_out_size - 1);
+	unsigned char *buf = dest;
+	int count;
 
 	/*
 	 * The first byte of the packet we send to the device contains an
@@ -382,119 +316,57 @@ static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
 	 *
 	 * See section 5.4.2.2 of the USB IrDA spec.
 	 */
-	*transfer_buffer = ir_xbof | ir_baud;
-	++transfer_buffer;
-
-	memcpy(transfer_buffer, buf, transfer_size);
+	*buf = ir_xbof | ir_baud;
 
-	usb_fill_bulk_urb(
-		port->write_urb,
-		port->serial->dev,
-		usb_sndbulkpipe(port->serial->dev,
-			port->bulk_out_endpointAddress),
-		port->write_urb->transfer_buffer,
-		transfer_size + 1,
-		ir_write_bulk_callback,
-		port);
-
-	port->write_urb->transfer_flags = URB_ZERO_PACKET;
-
-	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-	if (result) {
-		port->write_urb_busy = 0;
-		dev_err(&port->dev,
-			"%s - failed submitting write urb, error %d\n",
-			__func__, result);
-	} else
-		result = transfer_size;
-
-	return result;
+	count = kfifo_out_locked(&port->write_fifo, buf + 1, size - 1,
+								&port->lock);
+	return count + 1;
 }
 
-static void ir_write_bulk_callback(struct urb *urb)
+static void ir_process_read_urb(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
+	unsigned char *data = urb->transfer_buffer;
+	struct tty_struct *tty;
 
-	port->write_urb_busy = 0;
-	if (status) {
-		dbg("%s - nonzero write bulk status received: %d",
-		    __func__, status);
+	if (!urb->actual_length)
 		return;
-	}
+	/*
+	 * The first byte of the packet we get from the device
+	 * contains a busy indicator and baud rate change.
+	 * See section 5.4.1.2 of the USB IrDA spec.
+	 */
+	if (*data & 0x0f)
+		ir_baud = *data & 0x0f;
 
-	usb_serial_debug_data(
-		debug,
-		&port->dev,
-		__func__,
-		urb->actual_length,
-		urb->transfer_buffer);
+	if (urb->actual_length == 1)
+		return;
 
-	usb_serial_port_softint(port);
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
+		return;
+	tty_insert_flip_string(tty, data + 1, urb->actual_length - 1);
+	tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
 }
 
-static void ir_read_bulk_callback(struct urb *urb)
+static void ir_set_termios_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
-	struct tty_struct *tty;
-	unsigned char *data = urb->transfer_buffer;
-	int result;
 	int status = urb->status;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	switch (status) {
-	case 0: /* Successful */
-		/*
-		 * The first byte of the packet we get from the device
-		 * contains a busy indicator and baud rate change.
-		 * See section 5.4.1.2 of the USB IrDA spec.
-		 */
-		if ((*data & 0x0f) > 0)
-			ir_baud = *data & 0x0f;
-		usb_serial_debug_data(debug, &port->dev, __func__,
-						urb->actual_length, data);
-		tty = tty_port_tty_get(&port->port);
-		tty_insert_flip_string(tty, data+1, urb->actual_length - 1);
-		tty_flip_buffer_push(tty);
-		tty_kref_put(tty);
-
-		/*
-		 * No break here.
-		 * We want to resubmit the urb so we can read
-		 * again.
-		 */
-
-	case -EPROTO: /* taking inspiration from pl2303.c */
-			/* Continue trying to always read */
-		usb_fill_bulk_urb(
-			port->read_urb,
-			port->serial->dev, 
-			usb_rcvbulkpipe(port->serial->dev,
-				port->bulk_in_endpointAddress),
-			port->read_urb->transfer_buffer,
-			port->read_urb->transfer_buffer_length,
-			ir_read_bulk_callback,
-			port);
-
-		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-		if (result)
-			dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n",
-				__func__, result);
-			break ;
-	default:
-		dbg("%s - nonzero read bulk status received: %d",
-			__func__, status);
-		break ;
-	}
-	return;
+	kfree(urb->transfer_buffer);
+
+	if (status)
+		dbg("%s - non-zero urb status: %d", __func__, status);
 }
 
 static void ir_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
+	struct urb *urb;
 	unsigned char *transfer_buffer;
 	int result;
 	speed_t baud;
@@ -548,41 +420,63 @@ static void ir_set_termios(struct tty_struct *tty,
 	else
 		ir_xbof = ir_xbof_change(xbof) ;
 
-	/* FIXME need to check to see if our write urb is busy right
-	 * now, or use a urb pool.
-	 *
+	/* Only speed changes are supported */
+	tty_termios_copy_hw(tty->termios, old_termios);
+	tty_encode_baud_rate(tty, baud, baud);
+
+	/*
 	 * send the baud change out on an "empty" data packet
 	 */
-	transfer_buffer = port->write_urb->transfer_buffer;
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb) {
+		dev_err(&port->dev, "%s - no more urbs\n", __func__);
+		return;
+	}
+	transfer_buffer = kmalloc(1, GFP_KERNEL);
+	if (!transfer_buffer) {
+		dev_err(&port->dev, "%s - out of memory\n", __func__);
+		goto err_buf;
+	}
+
 	*transfer_buffer = ir_xbof | ir_baud;
 
 	usb_fill_bulk_urb(
-		port->write_urb,
+		urb,
 		port->serial->dev,
 		usb_sndbulkpipe(port->serial->dev,
 			port->bulk_out_endpointAddress),
-		port->write_urb->transfer_buffer,
+		transfer_buffer,
 		1,
-		ir_write_bulk_callback,
+		ir_set_termios_callback,
 		port);
 
-	port->write_urb->transfer_flags = URB_ZERO_PACKET;
+	urb->transfer_flags = URB_ZERO_PACKET;
 
-	result = usb_submit_urb(port->write_urb, GFP_KERNEL);
-	if (result)
-		dev_err(&port->dev,
-				"%s - failed submitting write urb, error %d\n",
-				__func__, result);
+	result = usb_submit_urb(urb, GFP_KERNEL);
+	if (result) {
+		dev_err(&port->dev, "%s - failed to submit urb: %d\n",
+							__func__, result);
+		goto err_subm;
+	}
 
-	/* Only speed changes are supported */
-	tty_termios_copy_hw(tty->termios, old_termios);
-	tty_encode_baud_rate(tty, baud, baud);
+	usb_free_urb(urb);
+
+	return;
+err_subm:
+	kfree(transfer_buffer);
+err_buf:
+	usb_free_urb(urb);
 }
 
 static int __init ir_init(void)
 {
 	int retval;
 
+	if (buffer_size) {
+		ir_device.bulk_in_size = buffer_size;
+		ir_device.bulk_out_size = buffer_size;
+	}
+
 	retval = usb_serial_register(&ir_device);
 	if (retval)
 		goto failed_usb_serial_register;
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 43f13cf2f01..74551cb2e8e 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -1044,34 +1044,6 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (buf == NULL)
 		return -ENOMEM;
 
-	/* fixup the endpoint buffer size */
-	kfree(port->bulk_out_buffer);
-	port->bulk_out_buffer = kmalloc(512, GFP_KERNEL);
-	port->bulk_out_size = 512;
-	kfree(port->bulk_in_buffer);
-	port->bulk_in_buffer = kmalloc(512, GFP_KERNEL);
-	port->bulk_in_size = 512;
-
-	if (!port->bulk_out_buffer || !port->bulk_in_buffer) {
-		kfree(port->bulk_out_buffer);
-		kfree(port->bulk_in_buffer);
-		kfree(buf);
-		return -ENOMEM;
-	}
-
-	usb_fill_bulk_urb(port->write_urb, port->serial->dev,
-			  usb_sndbulkpipe(port->serial->dev,
-					  port->bulk_out_endpointAddress),
-			  port->bulk_out_buffer, 512,
-			  NULL, NULL);
-
-
-	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-			  usb_rcvbulkpipe(port->serial->dev,
-					  port->bulk_in_endpointAddress),
-			  port->bulk_in_buffer, 512,
-			  NULL, NULL);
-
 	priv->poll = 0;
 
 	/* initialize writebuf */
@@ -1277,6 +1249,8 @@ static struct usb_serial_driver iuu_device = {
 		   },
 	.id_table = id_table,
 	.num_ports = 1,
+	.bulk_in_size = 512,
+	.bulk_out_size = 512,
 	.port_probe = iuu_create_sysfs_attrs,
 	.port_remove = iuu_remove_sysfs_attrs,
 	.open = iuu_open,
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 8eef91ba4b1..cdbe8bf7f67 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -1,6 +1,7 @@
 /*
  * KLSI KL5KUSB105 chip RS232 converter driver
  *
+ *   Copyright (C) 2010 Johan Hovold <jhovold@gmail.com>
  *   Copyright (C) 2001 Utz-Uwe Haus <haus@uuhaus.de>
  *
  *   This program is free software; you can redistribute it and/or modify
@@ -34,17 +35,6 @@
  *	implement handshaking or decide that we do not support it
  */
 
-/* History:
- *   0.3a - implemented pools of write URBs
- *   0.3  - alpha version for public testing
- *   0.2  - TIOCMGET works, so autopilot(1) can be used!
- *   0.1  - can be used to do pilot-xfer -p /dev/ttyUSB0 -l
- *
- *   The driver skeleton is mainly based on mct_u232.c and various other
- *   pieces of code shamelessly copied from the drivers/usb/serial/ directory.
- */
-
-
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/init.h>
@@ -64,8 +54,8 @@ static int debug;
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v0.3a"
-#define DRIVER_AUTHOR "Utz-Uwe Haus <haus@uuhaus.de>"
+#define DRIVER_VERSION "v0.4"
+#define DRIVER_AUTHOR "Utz-Uwe Haus <haus@uuhaus.de>, Johan Hovold <jhovold@gmail.com>"
 #define DRIVER_DESC "KLSI KL5KUSB105 chipset USB->Serial Converter driver"
 
 
@@ -73,23 +63,17 @@ static int debug;
  * Function prototypes
  */
 static int  klsi_105_startup(struct usb_serial *serial);
-static void klsi_105_disconnect(struct usb_serial *serial);
 static void klsi_105_release(struct usb_serial *serial);
 static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void klsi_105_close(struct usb_serial_port *port);
-static int  klsi_105_write(struct tty_struct *tty,
-	struct usb_serial_port *port, const unsigned char *buf, int count);
-static void klsi_105_write_bulk_callback(struct urb *urb);
-static int  klsi_105_chars_in_buffer(struct tty_struct *tty);
-static int  klsi_105_write_room(struct tty_struct *tty);
-static void klsi_105_read_bulk_callback(struct urb *urb);
 static void klsi_105_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
-static void klsi_105_throttle(struct tty_struct *tty);
-static void klsi_105_unthrottle(struct tty_struct *tty);
 static int  klsi_105_tiocmget(struct tty_struct *tty, struct file *file);
 static int  klsi_105_tiocmset(struct tty_struct *tty, struct file *file,
 			unsigned int set, unsigned int clear);
+static void klsi_105_process_read_urb(struct urb *urb);
+static int klsi_105_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size);
 
 /*
  * All of the device info needed for the KLSI converters.
@@ -107,7 +91,7 @@ static struct usb_driver kl5kusb105d_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id = 	1,
+	.no_dynamic_id =	1,
 };
 
 static struct usb_serial_driver kl5kusb105d_device = {
@@ -115,26 +99,23 @@ static struct usb_serial_driver kl5kusb105d_device = {
 		.owner =	THIS_MODULE,
 		.name =		"kl5kusb105d",
 	},
-	.description =	     "KL5KUSB105D / PalmConnect",
-	.usb_driver =	     &kl5kusb105d_driver,
-	.id_table =	     id_table,
-	.num_ports =	     1,
-	.open =		     klsi_105_open,
-	.close =	     klsi_105_close,
-	.write =	     klsi_105_write,
-	.write_bulk_callback = klsi_105_write_bulk_callback,
-	.chars_in_buffer =   klsi_105_chars_in_buffer,
-	.write_room =        klsi_105_write_room,
-	.read_bulk_callback = klsi_105_read_bulk_callback,
-	.set_termios =	     klsi_105_set_termios,
-	/*.break_ctl =	     klsi_105_break_ctl,*/
-	.tiocmget =          klsi_105_tiocmget,
-	.tiocmset =          klsi_105_tiocmset,
-	.attach =	     klsi_105_startup,
-	.disconnect =	     klsi_105_disconnect,
-	.release =	     klsi_105_release,
-	.throttle =	     klsi_105_throttle,
-	.unthrottle =	     klsi_105_unthrottle,
+	.description =		"KL5KUSB105D / PalmConnect",
+	.usb_driver =		&kl5kusb105d_driver,
+	.id_table =		id_table,
+	.num_ports =		1,
+	.bulk_out_size =	64,
+	.open =			klsi_105_open,
+	.close =		klsi_105_close,
+	.set_termios =		klsi_105_set_termios,
+	/*.break_ctl =		klsi_105_break_ctl,*/
+	.tiocmget =		klsi_105_tiocmget,
+	.tiocmset =		klsi_105_tiocmset,
+	.attach =		klsi_105_startup,
+	.release =		klsi_105_release,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
+	.process_read_urb =	klsi_105_process_read_urb,
+	.prepare_write_buffer =	klsi_105_prepare_write_buffer,
 };
 
 struct klsi_105_port_settings {
@@ -145,18 +126,11 @@ struct klsi_105_port_settings {
 	__u8	unknown2;
 } __attribute__ ((packed));
 
-/* we implement a pool of NUM_URBS urbs per usb_serial */
-#define NUM_URBS			1
-#define URB_TRANSFER_BUFFER_SIZE	64
 struct klsi_105_private {
 	struct klsi_105_port_settings	cfg;
 	struct ktermios			termios;
 	unsigned long			line_state; /* modem line settings */
-	/* write pool */
-	struct urb			*write_urb_pool[NUM_URBS];
 	spinlock_t			lock;
-	unsigned long			bytes_in;
-	unsigned long			bytes_out;
 };
 
 
@@ -189,7 +163,7 @@ static int klsi_105_chg_port_settings(struct usb_serial_port *port,
 		 settings->pktlen, settings->baudrate, settings->databits,
 		 settings->unknown1, settings->unknown2);
 	return rc;
-} /* klsi_105_chg_port_settings */
+}
 
 /* translate a 16-bit status value from the device to linux's TIO bits */
 static unsigned long klsi_105_status2linestate(const __u16 status)
@@ -202,6 +176,7 @@ static unsigned long klsi_105_status2linestate(const __u16 status)
 
 	return res;
 }
+
 /*
  * Read line control via vendor command and return result through
  * *line_state_p
@@ -258,7 +233,7 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
 static int klsi_105_startup(struct usb_serial *serial)
 {
 	struct klsi_105_private *priv;
-	int i, j;
+	int i;
 
 	/* check if we support the product id (see keyspan.c)
 	 * FIXME
@@ -282,29 +257,9 @@ static int klsi_105_startup(struct usb_serial *serial)
 
 		priv->line_state    = 0;
 
-		priv->bytes_in	    = 0;
-		priv->bytes_out	    = 0;
 		usb_set_serial_port_data(serial->port[i], priv);
 
 		spin_lock_init(&priv->lock);
-		for (j = 0; j < NUM_URBS; j++) {
-			struct urb *urb = usb_alloc_urb(0, GFP_KERNEL);
-
-			priv->write_urb_pool[j] = urb;
-			if (urb == NULL) {
-				dev_err(&serial->dev->dev, "No more urbs???\n");
-				goto err_cleanup;
-			}
-
-			urb->transfer_buffer =
-				kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
-			if (!urb->transfer_buffer) {
-				dev_err(&serial->dev->dev,
-					"%s - out of memory for urb buffers.\n",
-					__func__);
-				goto err_cleanup;
-			}
-		}
 
 		/* priv->termios is left uninitalized until port opening */
 		init_waitqueue_head(&serial->port[i]->write_wait);
@@ -315,44 +270,11 @@ static int klsi_105_startup(struct usb_serial *serial)
 err_cleanup:
 	for (; i >= 0; i--) {
 		priv = usb_get_serial_port_data(serial->port[i]);
-		for (j = 0; j < NUM_URBS; j++) {
-			if (priv->write_urb_pool[j]) {
-				kfree(priv->write_urb_pool[j]->transfer_buffer);
-				usb_free_urb(priv->write_urb_pool[j]);
-			}
-		}
+		kfree(priv);
 		usb_set_serial_port_data(serial->port[i], NULL);
 	}
 	return -ENOMEM;
-} /* klsi_105_startup */
-
-
-static void klsi_105_disconnect(struct usb_serial *serial)
-{
-	int i;
-
-	dbg("%s", __func__);
-
-	/* stop reads and writes on all ports */
-	for (i = 0; i < serial->num_ports; ++i) {
-		struct klsi_105_private *priv =
-				usb_get_serial_port_data(serial->port[i]);
-
-		if (priv) {
-			/* kill our write urb pool */
-			int j;
-			struct urb **write_urbs = priv->write_urb_pool;
-
-			for (j = 0; j < NUM_URBS; j++) {
-				if (write_urbs[j]) {
-					usb_kill_urb(write_urbs[j]);
-					usb_free_urb(write_urbs[j]);
-				}
-			}
-		}
-	}
-} /* klsi_105_disconnect */
-
+}
 
 static void klsi_105_release(struct usb_serial *serial)
 {
@@ -360,13 +282,9 @@ static void klsi_105_release(struct usb_serial *serial)
 
 	dbg("%s", __func__);
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		struct klsi_105_private *priv =
-				usb_get_serial_port_data(serial->port[i]);
-
-		kfree(priv);
-	}
-} /* klsi_105_release */
+	for (i = 0; i < serial->num_ports; ++i)
+		kfree(usb_get_serial_port_data(serial->port[i]));
+}
 
 static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
@@ -416,18 +334,8 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* READ_ON and urb submission */
-	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-		      usb_rcvbulkpipe(port->serial->dev,
-				      port->bulk_in_endpointAddress),
-		      port->read_urb->transfer_buffer,
-		      port->read_urb->transfer_buffer_length,
-		      klsi_105_read_bulk_callback,
-		      port);
-
-	rc = usb_submit_urb(port->read_urb, GFP_KERNEL);
+	rc = usb_serial_generic_open(tty, port);
 	if (rc) {
-		dev_err(&port->dev, "%s - failed submitting read urb, "
-			"error %d\n", __func__, rc);
 		retval = rc;
 		goto exit;
 	}
@@ -460,12 +368,10 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 exit:
 	kfree(cfg);
 	return retval;
-} /* klsi_105_open */
-
+}
 
 static void klsi_105_close(struct usb_serial_port *port)
 {
-	struct klsi_105_private *priv = usb_get_serial_port_data(port);
 	int rc;
 
 	dbg("%s port %d", __func__, port->number);
@@ -488,239 +394,62 @@ static void klsi_105_close(struct usb_serial_port *port)
 	mutex_unlock(&port->serial->disc_mutex);
 
 	/* shutdown our bulk reads and writes */
-	usb_kill_urb(port->write_urb);
-	usb_kill_urb(port->read_urb);
-	/* unlink our write pool */
-	/* FIXME */
+	usb_serial_generic_close(port);
+
 	/* wgg - do I need this? I think so. */
 	usb_kill_urb(port->interrupt_in_urb);
-	dev_info(&port->serial->dev->dev,
-		 "port stats: %ld bytes in, %ld bytes out\n",
-		 priv->bytes_in, priv->bytes_out);
-} /* klsi_105_close */
-
+}
 
 /* We need to write a complete 64-byte data block and encode the
  * number actually sent in the first double-byte, LSB-order. That
  * leaves at most 62 bytes of payload.
  */
-#define KLSI_105_DATA_OFFSET	2   /* in the bulk urb data block */
-
-
-static int klsi_105_write(struct tty_struct *tty,
-	struct usb_serial_port *port, const unsigned char *buf, int count)
+#define KLSI_HDR_LEN		2
+static int klsi_105_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size)
 {
-	struct klsi_105_private *priv = usb_get_serial_port_data(port);
-	int result, size;
-	int bytes_sent = 0;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	while (count > 0) {
-		/* try to find a free urb (write 0 bytes if none) */
-		struct urb *urb = NULL;
-		unsigned long flags;
-		int i;
-		/* since the pool is per-port we might not need
-		   the spin lock !? */
-		spin_lock_irqsave(&priv->lock, flags);
-		for (i = 0; i < NUM_URBS; i++) {
-			if (priv->write_urb_pool[i]->status != -EINPROGRESS) {
-				urb = priv->write_urb_pool[i];
-				dbg("%s - using pool URB %d", __func__, i);
-				break;
-			}
-		}
-		spin_unlock_irqrestore(&priv->lock, flags);
-
-		if (urb == NULL) {
-			dbg("%s - no more free urbs", __func__);
-			goto exit;
-		}
-
-		if (urb->transfer_buffer == NULL) {
-			urb->transfer_buffer =
-				kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
-			if (urb->transfer_buffer == NULL) {
-				dev_err(&port->dev,
-					"%s - no more kernel memory...\n",
-					__func__);
-				goto exit;
-			}
-		}
-
-		size = min(count, port->bulk_out_size - KLSI_105_DATA_OFFSET);
-		size = min(size, URB_TRANSFER_BUFFER_SIZE -
-							KLSI_105_DATA_OFFSET);
-
-		memcpy(urb->transfer_buffer + KLSI_105_DATA_OFFSET, buf, size);
-
-		/* write payload size into transfer buffer */
-		((__u8 *)urb->transfer_buffer)[0] = (__u8) (size & 0xFF);
-		((__u8 *)urb->transfer_buffer)[1] = (__u8) ((size & 0xFF00)>>8);
-
-		/* set up our urb */
-		usb_fill_bulk_urb(urb, port->serial->dev,
-			      usb_sndbulkpipe(port->serial->dev,
-					      port->bulk_out_endpointAddress),
-			      urb->transfer_buffer,
-			      URB_TRANSFER_BUFFER_SIZE,
-			      klsi_105_write_bulk_callback,
-			      port);
-
-		/* send the data out the bulk port */
-		result = usb_submit_urb(urb, GFP_ATOMIC);
-		if (result) {
-			dev_err(&port->dev,
-				"%s - failed submitting write urb, error %d\n",
-				__func__, result);
-			goto exit;
-		}
-		buf += size;
-		bytes_sent += size;
-		count -= size;
-	}
-exit:
-	/* lockless, but it's for debug info only... */
-	priv->bytes_out += bytes_sent;
-
-	return bytes_sent;	/* that's how much we wrote */
-} /* klsi_105_write */
-
-static void klsi_105_write_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status) {
-		dbg("%s - nonzero write bulk status received: %d", __func__,
-		    status);
-		return;
-	}
+	unsigned char *buf = dest;
+	int count;
 
-	usb_serial_port_softint(port);
-} /* klsi_105_write_bulk_completion_callback */
+	count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size,
+								&port->lock);
+	put_unaligned_le16(count, buf);
 
-
-/* return number of characters currently in the writing process */
-static int klsi_105_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	int chars = 0;
-	int i;
-	unsigned long flags;
-	struct klsi_105_private *priv = usb_get_serial_port_data(port);
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	for (i = 0; i < NUM_URBS; ++i) {
-		if (priv->write_urb_pool[i]->status == -EINPROGRESS)
-			chars += URB_TRANSFER_BUFFER_SIZE;
-	}
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	dbg("%s - returns %d", __func__, chars);
-	return chars;
+	return count + KLSI_HDR_LEN;
 }
 
-static int klsi_105_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	unsigned long flags;
-	int i;
-	int room = 0;
-	struct klsi_105_private *priv = usb_get_serial_port_data(port);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	for (i = 0; i < NUM_URBS; ++i) {
-		if (priv->write_urb_pool[i]->status != -EINPROGRESS)
-			room += URB_TRANSFER_BUFFER_SIZE;
-	}
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	dbg("%s - returns %d", __func__, room);
-	return room;
-}
-
-
-
-static void klsi_105_read_bulk_callback(struct urb *urb)
+/* The data received is preceded by a length double-byte in LSB-first order.
+ */
+static void klsi_105_process_read_urb(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
-	struct klsi_105_private *priv = usb_get_serial_port_data(port);
-	struct tty_struct *tty;
 	unsigned char *data = urb->transfer_buffer;
-	int rc;
-	int status = urb->status;
+	struct tty_struct *tty;
+	unsigned len;
 
-	dbg("%s - port %d", __func__, port->number);
+	/* empty urbs seem to happen, we ignore them */
+	if (!urb->actual_length)
+		return;
 
-	/* The urb might have been killed. */
-	if (status) {
-		dbg("%s - nonzero read bulk status received: %d", __func__,
-		    status);
+	if (urb->actual_length <= KLSI_HDR_LEN) {
+		dbg("%s - malformed packet", __func__);
 		return;
 	}
 
-	/* The data received is again preceded by a length double-byte in LSB-
-	 * first order (see klsi_105_write() )
-	 */
-	if (urb->actual_length == 0) {
-		/* empty urbs seem to happen, we ignore them */
-		/* dbg("%s - emtpy URB", __func__); */
-	       ;
-	} else if (urb->actual_length <= 2) {
-		dbg("%s - size %d URB not understood", __func__,
-		    urb->actual_length);
-		usb_serial_debug_data(debug, &port->dev, __func__,
-				      urb->actual_length, data);
-	} else {
-		int bytes_sent = ((__u8 *) data)[0] +
-				 ((unsigned int) ((__u8 *) data)[1] << 8);
-		tty = tty_port_tty_get(&port->port);
-		/* we should immediately resubmit the URB, before attempting
-		 * to pass the data on to the tty layer. But that needs locking
-		 * against re-entry an then mixed-up data because of
-		 * intermixed tty_flip_buffer_push()s
-		 * FIXME
-		 */
-		usb_serial_debug_data(debug, &port->dev, __func__,
-				      urb->actual_length, data);
-
-		if (bytes_sent + 2 > urb->actual_length) {
-			dbg("%s - trying to read more data than available"
-			    " (%d vs. %d)", __func__,
-			    bytes_sent+2, urb->actual_length);
-			/* cap at implied limit */
-			bytes_sent = urb->actual_length - 2;
-		}
-
-		tty_insert_flip_string(tty, data + 2, bytes_sent);
-		tty_flip_buffer_push(tty);
-		tty_kref_put(tty);
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
+		return;
 
-		/* again lockless, but debug info only */
-		priv->bytes_in += bytes_sent;
+	len = get_unaligned_le16(data);
+	if (len > urb->actual_length - KLSI_HDR_LEN) {
+		dbg("%s - packet length mismatch", __func__);
+		len = urb->actual_length - KLSI_HDR_LEN;
 	}
-	/* Continue trying to always read  */
-	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-		      usb_rcvbulkpipe(port->serial->dev,
-				      port->bulk_in_endpointAddress),
-		      port->read_urb->transfer_buffer,
-		      port->read_urb->transfer_buffer_length,
-		      klsi_105_read_bulk_callback,
-		      port);
-	rc = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-	if (rc)
-		dev_err(&port->dev,
-			"%s - failed resubmitting read urb, error %d\n",
-			__func__, rc);
-} /* klsi_105_read_bulk_callback */
 
+	tty_insert_flip_string(tty, data + KLSI_HDR_LEN, len);
+	tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
+}
 
 static void klsi_105_set_termios(struct tty_struct *tty,
 				 struct usb_serial_port *port,
@@ -887,8 +616,7 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 	klsi_105_chg_port_settings(port, cfg);
 err:
 	kfree(cfg);
-} /* klsi_105_set_termios */
-
+}
 
 #if 0
 static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
@@ -906,7 +634,7 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
 		lcr |= MCT_U232_SET_BREAK;
 
 	mct_u232_set_line_ctrl(serial, lcr);
-} /* mct_u232_break_ctl */
+}
 #endif
 
 static int klsi_105_tiocmget(struct tty_struct *tty, struct file *file)
@@ -962,29 +690,6 @@ static int klsi_105_tiocmset(struct tty_struct *tty, struct file *file,
 	return retval;
 }
 
-static void klsi_105_throttle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	dbg("%s - port %d", __func__, port->number);
-	usb_kill_urb(port->read_urb);
-}
-
-static void klsi_105_unthrottle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	int result;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	port->read_urb->dev = port->serial->dev;
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-			__func__, result);
-}
-
-
 
 static int __init klsi_105_init(void)
 {
@@ -1005,7 +710,6 @@ failed_usb_serial_register:
 	return retval;
 }
 
-
 static void __exit klsi_105_exit(void)
 {
 	usb_deregister(&kl5kusb105d_driver);
@@ -1023,5 +727,3 @@ MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "enable extensive debugging messages");
-
-/* vim: set sts=8 ts=8 sw=8: */
diff --git a/drivers/usb/serial/kl5kusb105.h b/drivers/usb/serial/kl5kusb105.h
index 1231d9e7839..22a90badc86 100644
--- a/drivers/usb/serial/kl5kusb105.h
+++ b/drivers/usb/serial/kl5kusb105.h
@@ -17,16 +17,16 @@
 /* baud rates */
 
 enum {
-  kl5kusb105a_sio_b115200 = 0,
-  kl5kusb105a_sio_b57600  = 1,
-  kl5kusb105a_sio_b38400  = 2,
-  kl5kusb105a_sio_b19200  = 4,
-  kl5kusb105a_sio_b14400  = 5,
-  kl5kusb105a_sio_b9600   = 6,
-  kl5kusb105a_sio_b4800   = 8,   /* unchecked */
-  kl5kusb105a_sio_b2400   = 9,   /* unchecked */
-  kl5kusb105a_sio_b1200   = 0xa,  /* unchecked */
-  kl5kusb105a_sio_b600    = 0xb   /* unchecked */
+	kl5kusb105a_sio_b115200 = 0,
+	kl5kusb105a_sio_b57600  = 1,
+	kl5kusb105a_sio_b38400  = 2,
+	kl5kusb105a_sio_b19200  = 4,
+	kl5kusb105a_sio_b14400  = 5,
+	kl5kusb105a_sio_b9600   = 6,
+	kl5kusb105a_sio_b4800   = 8,	/* unchecked */
+	kl5kusb105a_sio_b2400   = 9,	/* unchecked */
+	kl5kusb105a_sio_b1200   = 0xa,	/* unchecked */
+	kl5kusb105a_sio_b600    = 0xb	/* unchecked */
 };
 
 /* data bits */
@@ -53,17 +53,16 @@ enum {
 #define KL5KUSB105A_CTS			((1<<5) | (1<<4))
 
 #define KL5KUSB105A_WANTS_TO_SEND	0x30
-//#define KL5KUSB105A_DTR			/* Data Terminal Ready */
-//#define KL5KUSB105A_CTS			/* Clear To Send */
-//#define KL5KUSB105A_CD			/* Carrier Detect */
-//#define KL5KUSB105A_DSR			/* Data Set Ready */
-//#define KL5KUSB105A_RxD			/* Receive pin */
-
-//#define KL5KUSB105A_LE
-//#define KL5KUSB105A_RTS		
-//#define KL5KUSB105A_ST		
-//#define KL5KUSB105A_SR		
-//#define KL5KUSB105A_RI			/* Ring Indicator */
-
-/* vim: set ts=8 sts=8: */
-
+#if 0
+#define KL5KUSB105A_DTR			/* Data Terminal Ready */
+#define KL5KUSB105A_CTS			/* Clear To Send */
+#define KL5KUSB105A_CD			/* Carrier Detect */
+#define KL5KUSB105A_DSR			/* Data Set Ready */
+#define KL5KUSB105A_RxD			/* Receive pin */
+
+#define KL5KUSB105A_LE
+#define KL5KUSB105A_RTS
+#define KL5KUSB105A_ST
+#define KL5KUSB105A_SR
+#define KL5KUSB105A_RI			/* Ring Indicator */
+#endif
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index c113a2a0e10..bd5bd8589e0 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -345,7 +345,8 @@ static void kobil_close(struct usb_serial_port *port)
 
 	/* FIXME: Add rts/dtr methods */
 	if (port->write_urb) {
-		usb_kill_urb(port->write_urb);
+		usb_poison_urb(port->write_urb);
+		kfree(port->write_urb->transfer_buffer);
 		usb_free_urb(port->write_urb);
 		port->write_urb = NULL;
 	}
diff --git a/drivers/usb/serial/kobil_sct.h b/drivers/usb/serial/kobil_sct.h
index a51fbb5ae45..be207f7156f 100644
--- a/drivers/usb/serial/kobil_sct.h
+++ b/drivers/usb/serial/kobil_sct.h
@@ -23,38 +23,55 @@
 #define SUSBCR_SSL_SETDTR			0x0004
 #define SUSBCR_SSL_CLRDTR			0x0010
 
-#define SUSBCR_SSL_PURGE_TXABORT		0x0100  // Kill the pending/current writes to the comm port.
-#define SUSBCR_SSL_PURGE_RXABORT		0x0200  // Kill the pending/current reads to the comm port.
-#define SUSBCR_SSL_PURGE_TXCLEAR		0x0400  // Kill the transmit queue if there.
-#define SUSBCR_SSL_PURGE_RXCLEAR		0x0800  // Kill the typeahead buffer if there.
+/* Kill the pending/current writes to the comm port. */
+#define SUSBCR_SSL_PURGE_TXABORT		0x0100
+/* Kill the pending/current reads to the comm port. */
+#define SUSBCR_SSL_PURGE_RXABORT		0x0200
+/* Kill the transmit queue if there. */
+#define SUSBCR_SSL_PURGE_TXCLEAR		0x0400
+/* Kill the typeahead buffer if there. */
+#define SUSBCR_SSL_PURGE_RXCLEAR		0x0800
 
 #define SUSBCRequest_GetStatusLineState		4
-#define SUSBCR_GSL_RXCHAR			0x0001  // Any Character received
-#define SUSBCR_GSL_TXEMPTY			0x0004  // Transmitt Queue Empty
-#define SUSBCR_GSL_CTS				0x0008  // CTS changed state
-#define SUSBCR_GSL_DSR				0x0010  // DSR changed state
-#define SUSBCR_GSL_RLSD				0x0020  // RLSD changed state
-#define SUSBCR_GSL_BREAK			0x0040  // BREAK received
-#define SUSBCR_GSL_ERR				0x0080  // Line status error occurred
-#define SUSBCR_GSL_RING				0x0100  // Ring signal detected
+/* Any Character received */
+#define SUSBCR_GSL_RXCHAR			0x0001
+/* Transmitt Queue Empty */
+#define SUSBCR_GSL_TXEMPTY			0x0004
+/* CTS changed state */
+#define SUSBCR_GSL_CTS				0x0008
+/* DSR changed state */
+#define SUSBCR_GSL_DSR				0x0010
+/* RLSD changed state */
+#define SUSBCR_GSL_RLSD				0x0020
+/* BREAK received */
+#define SUSBCR_GSL_BREAK			0x0040
+/* Line status error occurred */
+#define SUSBCR_GSL_ERR				0x0080
+/* Ring signal detected */
+#define SUSBCR_GSL_RING				0x0100
 
 #define SUSBCRequest_Misc			8
-#define SUSBCR_MSC_ResetReader			0x0001	// use a predefined reset sequence
-#define SUSBCR_MSC_ResetAllQueues		0x0002	// use a predefined sequence to reset the internal queues
+/* use a predefined reset sequence */
+#define SUSBCR_MSC_ResetReader			0x0001
+/* use a predefined sequence to reset the internal queues */
+#define SUSBCR_MSC_ResetAllQueues		0x0002
 
 #define SUSBCRequest_GetMisc			0x10
-#define SUSBCR_MSC_GetFWVersion			0x0001	/* get the firmware version from device,
-							   coded like this 0xHHLLBBPP
-							   with HH = Firmware Version High Byte
-							   LL = Firmware Version Low Byte
-							   BB = Build Number
-							   PP = Further Attributes
-							*/
-
-#define SUSBCR_MSC_GetHWVersion			0x0002	/* get the hardware version from device
-							   coded like this 0xHHLLPPRR
-							   with HH = Software Version High Byte
-							   LL = Software Version Low Byte
-							   PP = Further Attributes
-							   RR = Reserved for the hardware ID 
-							*/
+
+/*
+ * get the firmware version from device, coded like this 0xHHLLBBPP with
+ * HH = Firmware Version High Byte
+ * LL = Firmware Version Low Byte
+ * BB = Build Number
+ * PP = Further Attributes
+ */
+#define SUSBCR_MSC_GetFWVersion			0x0001
+
+/*
+ * get the hardware version from device coded like this 0xHHLLPPRR with
+ * HH = Software Version High Byte
+ * LL = Software Version Low Byte
+ * PP = Further Attributes
+ * RR = Reserved for the hardware ID
+ */
+#define SUSBCR_MSC_GetHWVersion			0x0002
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 2849f8c3201..7aa01b95b1d 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -549,12 +549,9 @@ static void mct_u232_close(struct usb_serial_port *port)
 {
 	dbg("%s port %d", __func__, port->number);
 
-	if (port->serial->dev) {
-		/* shutdown our urbs */
-		usb_kill_urb(port->write_urb);
-		usb_kill_urb(port->read_urb);
+	usb_serial_generic_close(port);
+	if (port->serial->dev)
 		usb_kill_urb(port->interrupt_in_urb);
-	}
 } /* mct_u232_close */
 
 
diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h
index 7417d5ce1e2..3a3f5e6b8f9 100644
--- a/drivers/usb/serial/mct_u232.h
+++ b/drivers/usb/serial/mct_u232.h
@@ -42,36 +42,44 @@
 #define MCT_U232_SET_REQUEST_TYPE	0x40
 #define MCT_U232_GET_REQUEST_TYPE	0xc0
 
-#define MCT_U232_GET_MODEM_STAT_REQUEST 2  /* Get Modem Status Register (MSR) */
-#define MCT_U232_GET_MODEM_STAT_SIZE    1
+/* Get Modem Status Register (MSR) */
+#define MCT_U232_GET_MODEM_STAT_REQUEST	2
+#define MCT_U232_GET_MODEM_STAT_SIZE	1
 
-#define MCT_U232_GET_LINE_CTRL_REQUEST  6  /* Get Line Control Register (LCR) */
-#define MCT_U232_GET_LINE_CTRL_SIZE     1  /* ... not used by this driver */
+/* Get Line Control Register (LCR) */
+/* ... not used by this driver */
+#define MCT_U232_GET_LINE_CTRL_REQUEST	6
+#define MCT_U232_GET_LINE_CTRL_SIZE	1
 
-#define MCT_U232_SET_BAUD_RATE_REQUEST	5  /* Set Baud Rate Divisor */
-#define MCT_U232_SET_BAUD_RATE_SIZE     4
+/* Set Baud Rate Divisor */
+#define MCT_U232_SET_BAUD_RATE_REQUEST	5
+#define MCT_U232_SET_BAUD_RATE_SIZE	4
 
-#define MCT_U232_SET_LINE_CTRL_REQUEST	7  /* Set Line Control Register (LCR) */
-#define MCT_U232_SET_LINE_CTRL_SIZE     1
+/* Set Line Control Register (LCR) */
+#define MCT_U232_SET_LINE_CTRL_REQUEST	7
+#define MCT_U232_SET_LINE_CTRL_SIZE	1
 
-#define MCT_U232_SET_MODEM_CTRL_REQUEST	10 /* Set Modem Control Register (MCR) */
-#define MCT_U232_SET_MODEM_CTRL_SIZE    1
+/* Set Modem Control Register (MCR) */
+#define MCT_U232_SET_MODEM_CTRL_REQUEST	10
+#define MCT_U232_SET_MODEM_CTRL_SIZE	1
 
-/* This USB device request code is not well understood.  It is transmitted by
-   the MCT-supplied Windows driver whenever the baud rate changes. 
-*/
-#define MCT_U232_SET_UNKNOWN1_REQUEST   11  /* Unknown functionality */
-#define MCT_U232_SET_UNKNOWN1_SIZE       1
+/*
+ * This USB device request code is not well understood.  It is transmitted by
+ * the MCT-supplied Windows driver whenever the baud rate changes.
+ */
+#define MCT_U232_SET_UNKNOWN1_REQUEST	11  /* Unknown functionality */
+#define MCT_U232_SET_UNKNOWN1_SIZE	1
 
-/* This USB device request code appears to control whether CTS is required
-   during transmission.
-   
-   Sending a zero byte allows data transmission to a device which is not
-   asserting CTS.  Sending a '1' byte will cause transmission to be deferred
-   until the device asserts CTS.
-*/
-#define MCT_U232_SET_CTS_REQUEST   12
-#define MCT_U232_SET_CTS_SIZE       1
+/*
+ * This USB device request code appears to control whether CTS is required
+ * during transmission.
+ *
+ * Sending a zero byte allows data transmission to a device which is not
+ * asserting CTS.  Sending a '1' byte will cause transmission to be deferred
+ * until the device asserts CTS.
+ */
+#define MCT_U232_SET_CTS_REQUEST	12
+#define MCT_U232_SET_CTS_SIZE		1
 
 #define MCT_U232_MAX_SIZE		4	/* of MCT_XXX_SIZE */
 
@@ -81,7 +89,8 @@
  * and "Intel solution". They are the regular MCT and "Sitecom" for us.
  * This is pointless to document in the header, see the code for the bits.
  */
-static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value, speed_t *result);
+static int mct_u232_calculate_baud_rate(struct usb_serial *serial,
+					speed_t value, speed_t *result);
 
 /*
  * Line Control Register (LCR)
@@ -125,16 +134,16 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
 /*
  * Line Status Register (LSR)
  */
-#define MCT_U232_LSR_INDEX              1       /* data[index] */
-#define MCT_U232_LSR_ERR                0x80    /* OE | PE | FE | BI */
-#define MCT_U232_LSR_TEMT               0x40    /* transmit register empty */
-#define MCT_U232_LSR_THRE               0x20    /* transmit holding register empty */
-#define MCT_U232_LSR_BI                 0x10    /* break indicator */
-#define MCT_U232_LSR_FE                 0x08    /* framing error */
-#define MCT_U232_LSR_OE                 0x02    /* overrun error */
-#define MCT_U232_LSR_PE                 0x04    /* parity error */
-#define MCT_U232_LSR_OE                 0x02    /* overrun error */
-#define MCT_U232_LSR_DR                 0x01    /* receive data ready */
+#define MCT_U232_LSR_INDEX	1	/* data[index] */
+#define MCT_U232_LSR_ERR	0x80	/* OE | PE | FE | BI */
+#define MCT_U232_LSR_TEMT	0x40	/* transmit register empty */
+#define MCT_U232_LSR_THRE	0x20	/* transmit holding register empty */
+#define MCT_U232_LSR_BI		0x10	/* break indicator */
+#define MCT_U232_LSR_FE		0x08	/* framing error */
+#define MCT_U232_LSR_OE		0x02	/* overrun error */
+#define MCT_U232_LSR_PE		0x04	/* parity error */
+#define MCT_U232_LSR_OE		0x02	/* overrun error */
+#define MCT_U232_LSR_DR		0x01	/* receive data ready */
 
 
 /* -----------------------------------------------------------------------------
@@ -143,10 +152,10 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
  *
  *  The technical details of the device have been acquired be using "SniffUSB"
  *  and the vendor-supplied device driver (version 2.3A) under Windows98. To
- *  identify the USB vendor-specific requests and to assign them to terminal 
+ *  identify the USB vendor-specific requests and to assign them to terminal
  *  settings (flow control, baud rate, etc.) the program "SerialSettings" from
  *  William G. Greathouse has been proven to be very useful. I also used the
- *  Win98 "HyperTerminal" and "usb-robot" on Linux for testing. The results and 
+ *  Win98 "HyperTerminal" and "usb-robot" on Linux for testing. The results and
  *  observations are summarized below:
  *
  *  The USB requests seem to be directly mapped to the registers of a 8250,
@@ -186,33 +195,33 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
  *  Data:           LCR (see below)
  *
  *  Bit 7: Divisor Latch Access Bit (DLAB). When set, access to the data
- *  	   transmit/receive register (THR/RBR) and the Interrupt Enable Register
- *  	   (IER) is disabled. Any access to these ports is now redirected to the
- *  	   Divisor Latch Registers. Setting this bit, loading the Divisor
- *  	   Registers, and clearing DLAB should be done with interrupts disabled.
+ *	   transmit/receive register (THR/RBR) and the Interrupt Enable Register
+ *	   (IER) is disabled. Any access to these ports is now redirected to the
+ *	   Divisor Latch Registers. Setting this bit, loading the Divisor
+ *	   Registers, and clearing DLAB should be done with interrupts disabled.
  *  Bit 6: Set Break. When set to "1", the transmitter begins to transmit
- *  	   continuous Spacing until this bit is set to "0". This overrides any
- *  	   bits of characters that are being transmitted.
+ *	   continuous Spacing until this bit is set to "0". This overrides any
+ *	   bits of characters that are being transmitted.
  *  Bit 5: Stick Parity. When parity is enabled, setting this bit causes parity
- *  	   to always be "1" or "0", based on the value of Bit 4.
+ *	   to always be "1" or "0", based on the value of Bit 4.
  *  Bit 4: Even Parity Select (EPS). When parity is enabled and Bit 5 is "0",
- *  	   setting this bit causes even parity to be transmitted and expected.
- *  	   Otherwise, odd parity is used.
+ *	   setting this bit causes even parity to be transmitted and expected.
+ *	   Otherwise, odd parity is used.
  *  Bit 3: Parity Enable (PEN). When set to "1", a parity bit is inserted
- *  	   between the last bit of the data and the Stop Bit. The UART will also
- *  	   expect parity to be present in the received data.
+ *	   between the last bit of the data and the Stop Bit. The UART will also
+ *	   expect parity to be present in the received data.
  *  Bit 2: Number of Stop Bits (STB). If set to "1" and using 5-bit data words,
- *  	   1.5 Stop Bits are transmitted and expected in each data word. For
- *  	   6, 7 and 8-bit data words, 2 Stop Bits are transmitted and expected.
- *  	   When this bit is set to "0", one Stop Bit is used on each data word.
+ *	   1.5 Stop Bits are transmitted and expected in each data word. For
+ *	   6, 7 and 8-bit data words, 2 Stop Bits are transmitted and expected.
+ *	   When this bit is set to "0", one Stop Bit is used on each data word.
  *  Bit 1: Word Length Select Bit #1 (WLSB1)
  *  Bit 0: Word Length Select Bit #0 (WLSB0)
- *  	   Together these bits specify the number of bits in each data word.
- *  	     1 0  Word Length
- *  	     0 0  5 Data Bits
- *  	     0 1  6 Data Bits
- *  	     1 0  7 Data Bits
- *  	     1 1  8 Data Bits
+ *	   Together these bits specify the number of bits in each data word.
+ *	     1 0  Word Length
+ *	     0 0  5 Data Bits
+ *	     0 1  6 Data Bits
+ *	     1 0  7 Data Bits
+ *	     1 1  8 Data Bits
  *
  *  SniffUSB observations: Bit 7 seems not to be used. There seem to be two bugs
  *  in the Win98 driver: the break does not work (bit 6 is not asserted) and the
@@ -234,20 +243,20 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
  *  Bit 6: Reserved, always 0.
  *  Bit 5: Reserved, always 0.
  *  Bit 4: Loop-Back Enable. When set to "1", the UART transmitter and receiver
- *  	   are internally connected together to allow diagnostic operations. In
- *  	   addition, the UART modem control outputs are connected to the UART
- *  	   modem control inputs. CTS is connected to RTS, DTR is connected to
- *  	   DSR, OUT1 is connected to RI, and OUT 2 is connected to DCD.
+ *	   are internally connected together to allow diagnostic operations. In
+ *	   addition, the UART modem control outputs are connected to the UART
+ *	   modem control inputs. CTS is connected to RTS, DTR is connected to
+ *	   DSR, OUT1 is connected to RI, and OUT 2 is connected to DCD.
  *  Bit 3: OUT 2. An auxiliary output that the host processor may set high or
- *  	   low. In the IBM PC serial adapter (and most clones), OUT 2 is used
- *  	   to tri-state (disable) the interrupt signal from the
- *  	   8250/16450/16550 UART.
+ *	   low. In the IBM PC serial adapter (and most clones), OUT 2 is used
+ *	   to tri-state (disable) the interrupt signal from the
+ *	   8250/16450/16550 UART.
  *  Bit 2: OUT 1. An auxiliary output that the host processor may set high or
- *  	   low. This output is not used on the IBM PC serial adapter.
+ *	   low. This output is not used on the IBM PC serial adapter.
  *  Bit 1: Request to Send (RTS). When set to "1", the output of the UART -RTS
- *  	   line is Low (Active).
+ *	   line is Low (Active).
  *  Bit 0: Data Terminal Ready (DTR). When set to "1", the output of the UART
- *  	   -DTR line is Low (Active).
+ *	   -DTR line is Low (Active).
  *
  *  SniffUSB observations: Bit 2 and 4 seem not to be used but bit 3 has been
  *  seen _always_ set.
@@ -264,22 +273,22 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
  *  Data:           MSR (see below)
  *
  *  Bit 7: Data Carrier Detect (CD). Reflects the state of the DCD line on the
- *  	   UART.
+ *	   UART.
  *  Bit 6: Ring Indicator (RI). Reflects the state of the RI line on the UART.
  *  Bit 5: Data Set Ready (DSR). Reflects the state of the DSR line on the UART.
  *  Bit 4: Clear To Send (CTS). Reflects the state of the CTS line on the UART.
  *  Bit 3: Delta Data Carrier Detect (DDCD). Set to "1" if the -DCD line has
- *  	   changed state one more more times since the last time the MSR was
- *  	   read by the host.
+ *	   changed state one more more times since the last time the MSR was
+ *	   read by the host.
  *  Bit 2: Trailing Edge Ring Indicator (TERI). Set to "1" if the -RI line has
- *  	   had a low to high transition since the last time the MSR was read by
- *  	   the host.
+ *	   had a low to high transition since the last time the MSR was read by
+ *	   the host.
  *  Bit 1: Delta Data Set Ready (DDSR). Set to "1" if the -DSR line has changed
- *  	   state one more more times since the last time the MSR was read by the
- *  	   host.
+ *	   state one more more times since the last time the MSR was read by the
+ *	   host.
  *  Bit 0: Delta Clear To Send (DCTS). Set to "1" if the -CTS line has changed
- *  	   state one more times since the last time the MSR was read by the
- *  	   host.
+ *	   state one more times since the last time the MSR was read by the
+ *	   host.
  *
  *  SniffUSB observations: the MSR is also returned as first byte on the
  *  interrupt-in endpoint 0x83 to signal changes of modem status lines. The USB
@@ -290,31 +299,34 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
  * --------------------------
  *
  *  Bit 7   Error in Receiver FIFO. On the 8250/16450 UART, this bit is zero.
- *  	    This bit is set to "1" when any of the bytes in the FIFO have one or
- *  	    more of the following error conditions: PE, FE, or BI.
+ *	    This bit is set to "1" when any of the bytes in the FIFO have one
+ *	    or more of the following error conditions: PE, FE, or BI.
  *  Bit 6   Transmitter Empty (TEMT). When set to "1", there are no words
- *  	    remaining in the transmit FIFO or the transmit shift register. The
- *  	    transmitter is completely idle.
- *  Bit 5   Transmitter Holding Register Empty (THRE). When set to "1", the FIFO
- *  	    (or holding register) now has room for at least one additional word
- *  	    to transmit. The transmitter may still be transmitting when this bit
- *  	    is set to "1".
+ *	    remaining in the transmit FIFO or the transmit shift register. The
+ *	    transmitter is completely idle.
+ *  Bit 5   Transmitter Holding Register Empty (THRE). When set to "1", the
+ *	    FIFO (or holding register) now has room for at least one additional
+ *	    word to transmit. The transmitter may still be transmitting when
+ *	    this bit is set to "1".
  *  Bit 4   Break Interrupt (BI). The receiver has detected a Break signal.
- *  Bit 3   Framing Error (FE). A Start Bit was detected but the Stop Bit did not
- *  	    appear at the expected time. The received word is probably garbled.
- *  Bit 2   Parity Error (PE). The parity bit was incorrect for the word received.
- *  Bit 1   Overrun Error (OE). A new word was received and there was no room in
- *  	    the receive buffer. The newly-arrived word in the shift register is
- *  	    discarded. On 8250/16450 UARTs, the word in the holding register is
- *  	    discarded and the newly- arrived word is put in the holding register.
+ *  Bit 3   Framing Error (FE). A Start Bit was detected but the Stop Bit did
+ *	    not appear at the expected time. The received word is probably
+ *	    garbled.
+ *  Bit 2   Parity Error (PE). The parity bit was incorrect for the word
+ *	    received.
+ *  Bit 1   Overrun Error (OE). A new word was received and there was no room
+ *	    in the receive buffer. The newly-arrived word in the shift register
+ *	    is discarded. On 8250/16450 UARTs, the word in the holding register
+ *	    is discarded and the newly- arrived word is put in the holding
+ *	    register.
  *  Bit 0   Data Ready (DR). One or more words are in the receive FIFO that the
- *  	    host may read. A word must be completely received and moved from the
- *  	    shift register into the FIFO (or holding register for 8250/16450
- *  	    designs) before this bit is set.
+ *	    host may read. A word must be completely received and moved from
+ *	    the shift register into the FIFO (or holding register for
+ *	    8250/16450 designs) before this bit is set.
  *
- *  SniffUSB observations: the LSR is returned as second byte on the interrupt-in
- *  endpoint 0x83 to signal error conditions. Such errors have been seen with
- *  minicom/zmodem transfers (CRC errors).
+ *  SniffUSB observations: the LSR is returned as second byte on the
+ *  interrupt-in endpoint 0x83 to signal error conditions. Such errors have
+ *  been seen with minicom/zmodem transfers (CRC errors).
  *
  *
  * Unknown #1
@@ -364,16 +376,16 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
  * --------------
  *
  *  SniffUSB observations: the bulk-out endpoint 0x1 and interrupt-in endpoint
- *  0x81 is used to transmit and receive characters. The second interrupt-in 
- *  endpoint 0x83 signals exceptional conditions like modem line changes and 
+ *  0x81 is used to transmit and receive characters. The second interrupt-in
+ *  endpoint 0x83 signals exceptional conditions like modem line changes and
  *  errors. The first byte returned is the MSR and the second byte the LSR.
  *
  *
  * Other observations
  * ------------------
  *
- *  Queued bulk transfers like used in visor.c did not work. 
- *  
+ *  Queued bulk transfers like used in visor.c did not work.
+ *
  *
  * Properties of the USB device used (as found in /var/log/messages)
  * -----------------------------------------------------------------
@@ -411,26 +423,26 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
  *      bInterface Class:SubClass:Protocol =   00:00:00
  *      iInterface          =   00
  *      Endpoint:
- * 	  bLength             =    7
- * 	  bDescriptorType     =   05
- * 	  bEndpointAddress    =   81 (in)
- * 	  bmAttributes        =   03 (Interrupt)
- * 	  wMaxPacketSize      = 0040
- * 	  bInterval           =   02
+ *	  bLength             =    7
+ *	  bDescriptorType     =   05
+ *	  bEndpointAddress    =   81 (in)
+ *	  bmAttributes        =   03 (Interrupt)
+ *	  wMaxPacketSize      = 0040
+ *	  bInterval           =   02
  *      Endpoint:
- * 	  bLength             =    7
- * 	  bDescriptorType     =   05
- * 	  bEndpointAddress    =   01 (out)
- * 	  bmAttributes        =   02 (Bulk)
- * 	  wMaxPacketSize      = 0040
- * 	  bInterval           =   00
+ *	  bLength             =    7
+ *	  bDescriptorType     =   05
+ *	  bEndpointAddress    =   01 (out)
+ *	  bmAttributes        =   02 (Bulk)
+ *	  wMaxPacketSize      = 0040
+ *	  bInterval           =   00
  *      Endpoint:
- * 	  bLength             =    7
- * 	  bDescriptorType     =   05
- * 	  bEndpointAddress    =   83 (in)
- * 	  bmAttributes        =   03 (Interrupt)
- * 	  wMaxPacketSize      = 0002
- * 	  bInterval           =   02
+ *	  bLength             =    7
+ *	  bDescriptorType     =   05
+ *	  bEndpointAddress    =   83 (in)
+ *	  bmAttributes        =   03 (Interrupt)
+ *	  wMaxPacketSize      = 0002
+ *	  bInterval           =   02
  *
  *
  * Hardware details (added by Martin Hamilton, 2001/12/06)
@@ -440,7 +452,7 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
  * adaptor, which turns out to simply be a re-badged U232-P9.  We
  * know this because there is a sticky label on the circuit board
  * which says "U232-P9" ;-)
- * 
+ *
  * The circuit board inside the adaptor contains a Philips PDIUSBD12
  * USB endpoint chip and a Philips P87C52UBAA microcontroller with
  * embedded UART.  Exhaustive documentation for these is available at:
@@ -449,7 +461,7 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
  *   http://www.semiconductors.philips.com/pip/pdiusbd12
  *
  * Thanks to Julian Highfield for the pointer to the Philips database.
- * 
+ *
  */
 
 #endif /* __LINUX_USB_SERIAL_MCT_U232_H */
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 0d47f2c4d59..30922a7e334 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -34,21 +34,18 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include <linux/uaccess.h>
-
+#include <linux/parport.h>
 
 /*
  * Version Information
  */
-#define DRIVER_VERSION "1.0.0.4F"
+#define DRIVER_VERSION "2.1"
 #define DRIVER_AUTHOR "Aspire Communications pvt Ltd."
 #define DRIVER_DESC "Moschip USB Serial Driver"
 
 /* default urb timeout */
 #define MOS_WDR_TIMEOUT	(HZ * 5)
 
-#define MOS_PORT1	0x0200
-#define MOS_PORT2	0x0300
-#define MOS_VENREG	0x0000
 #define MOS_MAX_PORT	0x02
 #define MOS_WRITE	0x0E
 #define MOS_READ	0x0D
@@ -63,7 +60,7 @@
 #define NUM_URBS			16	/* URB Count */
 #define URB_TRANSFER_BUFFER_SIZE	32	/* URB Size */
 
-/* This structure holds all of the local port information */
+/* This structure holds all of the local serial port information */
 struct moschip_port {
 	__u8	shadowLCR;		/* last LCR value received */
 	__u8	shadowMCR;		/* last MCR value received */
@@ -74,11 +71,6 @@ struct moschip_port {
 	struct urb		*write_urb_pool[NUM_URBS];
 };
 
-/* This structure holds all of the individual serial device information */
-struct moschip_serial {
-	int interrupt_started;
-};
-
 static int debug;
 
 static struct usb_serial_driver moschip7720_2port_driver;
@@ -94,6 +86,658 @@ static const struct usb_device_id moschip_port_id_table[] = {
 };
 MODULE_DEVICE_TABLE(usb, moschip_port_id_table);
 
+#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
+
+/* initial values for parport regs */
+#define DCR_INIT_VAL       0x0c	/* SLCTIN, nINIT */
+#define ECR_INIT_VAL       0x00	/* SPP mode */
+
+struct urbtracker {
+	struct mos7715_parport  *mos_parport;
+	struct list_head        urblist_entry;
+	struct kref             ref_count;
+	struct urb              *urb;
+};
+
+enum mos7715_pp_modes {
+	SPP = 0<<5,
+	PS2 = 1<<5,      /* moschip calls this 'NIBBLE' mode */
+	PPF = 2<<5,	 /* moschip calls this 'CB-FIFO mode */
+};
+
+struct mos7715_parport {
+	struct parport          *pp;	       /* back to containing struct */
+	struct kref             ref_count;     /* to instance of this struct */
+	struct list_head        deferred_urbs; /* list deferred async urbs */
+	struct list_head        active_urbs;   /* list async urbs in flight */
+	spinlock_t              listlock;      /* protects list access */
+	bool                    msg_pending;   /* usb sync call pending */
+	struct completion       syncmsg_compl; /* usb sync call completed */
+	struct tasklet_struct   urb_tasklet;   /* for sending deferred urbs */
+	struct usb_serial       *serial;       /* back to containing struct */
+	__u8	                shadowECR;     /* parallel port regs... */
+	__u8	                shadowDCR;
+	atomic_t                shadowDSR;     /* updated in int-in callback */
+};
+
+/* lock guards against dereferencing NULL ptr in parport ops callbacks */
+static DEFINE_SPINLOCK(release_lock);
+
+#endif	/* CONFIG_USB_SERIAL_MOS7715_PARPORT */
+
+static const unsigned int dummy; /* for clarity in register access fns */
+
+enum mos_regs {
+	THR,	          /* serial port regs */
+	RHR,
+	IER,
+	FCR,
+	ISR,
+	LCR,
+	MCR,
+	LSR,
+	MSR,
+	SPR,
+	DLL,
+	DLM,
+	DPR,              /* parallel port regs */
+	DSR,
+	DCR,
+	ECR,
+	SP1_REG,          /* device control regs */
+	SP2_REG,          /* serial port 2 (7720 only) */
+	PP_REG,
+	SP_CONTROL_REG,
+};
+
+/*
+ * Return the correct value for the Windex field of the setup packet
+ * for a control endpoint message.  See the 7715 datasheet.
+ */
+static inline __u16 get_reg_index(enum mos_regs reg)
+{
+	static const __u16 mos7715_index_lookup_table[] = {
+		0x00,		/* THR */
+		0x00,		/* RHR */
+		0x01,		/* IER */
+		0x02,		/* FCR */
+		0x02,		/* ISR */
+		0x03,		/* LCR */
+		0x04,		/* MCR */
+		0x05,		/* LSR */
+		0x06,		/* MSR */
+		0x07,		/* SPR */
+		0x00,		/* DLL */
+		0x01,		/* DLM */
+		0x00,		/* DPR */
+		0x01,		/* DSR */
+		0x02,		/* DCR */
+		0x0a,		/* ECR */
+		0x01,		/* SP1_REG */
+		0x02,		/* SP2_REG (7720 only) */
+		0x04,		/* PP_REG (7715 only) */
+		0x08,		/* SP_CONTROL_REG */
+	};
+	return mos7715_index_lookup_table[reg];
+}
+
+/*
+ * Return the correct value for the upper byte of the Wvalue field of
+ * the setup packet for a control endpoint message.
+ */
+static inline __u16 get_reg_value(enum mos_regs reg,
+				  unsigned int serial_portnum)
+{
+	if (reg >= SP1_REG)	      /* control reg */
+		return 0x0000;
+
+	else if (reg >= DPR)	      /* parallel port reg (7715 only) */
+		return 0x0100;
+
+	else			      /* serial port reg */
+		return (serial_portnum + 2) << 8;
+}
+
+/*
+ * Write data byte to the specified device register.  The data is embedded in
+ * the value field of the setup packet. serial_portnum is ignored for registers
+ * not specific to a particular serial port.
+ */
+static int write_mos_reg(struct usb_serial *serial, unsigned int serial_portnum,
+			 enum mos_regs reg, __u8 data)
+{
+	struct usb_device *usbdev = serial->dev;
+	unsigned int pipe = usb_sndctrlpipe(usbdev, 0);
+	__u8 request = (__u8)0x0e;
+	__u8 requesttype = (__u8)0x40;
+	__u16 index = get_reg_index(reg);
+	__u16 value = get_reg_value(reg, serial_portnum) + data;
+	int status = usb_control_msg(usbdev, pipe, request, requesttype, value,
+				     index, NULL, 0, MOS_WDR_TIMEOUT);
+	if (status < 0)
+		dev_err(&usbdev->dev,
+			"mos7720: usb_control_msg() failed: %d", status);
+	return status;
+}
+
+/*
+ * Read data byte from the specified device register.  The data returned by the
+ * device is embedded in the value field of the setup packet.  serial_portnum is
+ * ignored for registers that are not specific to a particular serial port.
+ */
+static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum,
+			enum mos_regs reg, __u8 *data)
+{
+	struct usb_device *usbdev = serial->dev;
+	unsigned int pipe = usb_rcvctrlpipe(usbdev, 0);
+	__u8 request = (__u8)0x0d;
+	__u8 requesttype = (__u8)0xc0;
+	__u16 index = get_reg_index(reg);
+	__u16 value = get_reg_value(reg, serial_portnum);
+	int status = usb_control_msg(usbdev, pipe, request, requesttype, value,
+				     index, data, 1, MOS_WDR_TIMEOUT);
+	if (status < 0)
+		dev_err(&usbdev->dev,
+			"mos7720: usb_control_msg() failed: %d", status);
+	return status;
+}
+
+#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
+
+static inline int mos7715_change_mode(struct mos7715_parport *mos_parport,
+				      enum mos7715_pp_modes mode)
+{
+	mos_parport->shadowECR = mode;
+	write_mos_reg(mos_parport->serial, dummy, ECR, mos_parport->shadowECR);
+	return 0;
+}
+
+static void destroy_mos_parport(struct kref *kref)
+{
+	struct mos7715_parport *mos_parport =
+		container_of(kref, struct mos7715_parport, ref_count);
+
+	dbg("%s called", __func__);
+	kfree(mos_parport);
+}
+
+static void destroy_urbtracker(struct kref *kref)
+{
+	struct urbtracker *urbtrack =
+		container_of(kref, struct urbtracker, ref_count);
+	struct mos7715_parport *mos_parport = urbtrack->mos_parport;
+	dbg("%s called", __func__);
+	usb_free_urb(urbtrack->urb);
+	kfree(urbtrack);
+	kref_put(&mos_parport->ref_count, destroy_mos_parport);
+}
+
+/*
+ * This runs as a tasklet when sending an urb in a non-blocking parallel
+ * port callback had to be deferred because the disconnect mutex could not be
+ * obtained at the time.
+ */
+static void send_deferred_urbs(unsigned long _mos_parport)
+{
+	int ret_val;
+	unsigned long flags;
+	struct mos7715_parport *mos_parport = (void *)_mos_parport;
+	struct urbtracker *urbtrack;
+	struct list_head *cursor, *next;
+
+	dbg("%s called", __func__);
+
+	/* if release function ran, game over */
+	if (unlikely(mos_parport->serial == NULL))
+		return;
+
+	/* try again to get the mutex */
+	if (!mutex_trylock(&mos_parport->serial->disc_mutex)) {
+		dbg("%s: rescheduling tasklet", __func__);
+		tasklet_schedule(&mos_parport->urb_tasklet);
+		return;
+	}
+
+	/* if device disconnected, game over */
+	if (unlikely(mos_parport->serial->disconnected)) {
+		mutex_unlock(&mos_parport->serial->disc_mutex);
+		return;
+	}
+
+	spin_lock_irqsave(&mos_parport->listlock, flags);
+	if (list_empty(&mos_parport->deferred_urbs)) {
+		spin_unlock_irqrestore(&mos_parport->listlock, flags);
+		mutex_unlock(&mos_parport->serial->disc_mutex);
+		dbg("%s: deferred_urbs list empty", __func__);
+		return;
+	}
+
+	/* move contents of deferred_urbs list to active_urbs list and submit */
+	list_for_each_safe(cursor, next, &mos_parport->deferred_urbs)
+		list_move_tail(cursor, &mos_parport->active_urbs);
+	list_for_each_entry(urbtrack, &mos_parport->active_urbs,
+			    urblist_entry) {
+		ret_val = usb_submit_urb(urbtrack->urb, GFP_ATOMIC);
+		dbg("%s: urb submitted", __func__);
+		if (ret_val) {
+			dev_err(&mos_parport->serial->dev->dev,
+				"usb_submit_urb() failed: %d", ret_val);
+			list_del(&urbtrack->urblist_entry);
+			kref_put(&urbtrack->ref_count, destroy_urbtracker);
+		}
+	}
+	spin_unlock_irqrestore(&mos_parport->listlock, flags);
+	mutex_unlock(&mos_parport->serial->disc_mutex);
+}
+
+/* callback for parallel port control urbs submitted asynchronously */
+static void async_complete(struct urb *urb)
+{
+	struct urbtracker *urbtrack = urb->context;
+	int status = urb->status;
+	dbg("%s called", __func__);
+	if (unlikely(status))
+		dbg("%s - nonzero urb status received: %d", __func__, status);
+
+	/* remove the urbtracker from the active_urbs list */
+	spin_lock(&urbtrack->mos_parport->listlock);
+	list_del(&urbtrack->urblist_entry);
+	spin_unlock(&urbtrack->mos_parport->listlock);
+	kref_put(&urbtrack->ref_count, destroy_urbtracker);
+}
+
+static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
+				      enum mos_regs reg, __u8 data)
+{
+	struct urbtracker *urbtrack;
+	int ret_val;
+	unsigned long flags;
+	struct usb_ctrlrequest setup;
+	struct usb_serial *serial = mos_parport->serial;
+	struct usb_device *usbdev = serial->dev;
+	dbg("%s called", __func__);
+
+	/* create and initialize the control urb and containing urbtracker */
+	urbtrack = kmalloc(sizeof(struct urbtracker), GFP_ATOMIC);
+	if (urbtrack == NULL) {
+		dev_err(&usbdev->dev, "out of memory");
+		return -ENOMEM;
+	}
+	kref_get(&mos_parport->ref_count);
+	urbtrack->mos_parport = mos_parport;
+	urbtrack->urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (urbtrack->urb == NULL) {
+		dev_err(&usbdev->dev, "out of urbs");
+		kfree(urbtrack);
+		return -ENOMEM;
+	}
+	setup.bRequestType = (__u8)0x40;
+	setup.bRequest = (__u8)0x0e;
+	setup.wValue = get_reg_value(reg, dummy);
+	setup.wIndex = get_reg_index(reg);
+	setup.wLength = 0;
+	usb_fill_control_urb(urbtrack->urb, usbdev,
+			     usb_sndctrlpipe(usbdev, 0),
+			     (unsigned char *)&setup,
+			     NULL, 0, async_complete, urbtrack);
+	kref_init(&urbtrack->ref_count);
+	INIT_LIST_HEAD(&urbtrack->urblist_entry);
+
+	/*
+	 * get the disconnect mutex, or add tracker to the deferred_urbs list
+	 * and schedule a tasklet to try again later
+	 */
+	if (!mutex_trylock(&serial->disc_mutex)) {
+		spin_lock_irqsave(&mos_parport->listlock, flags);
+		list_add_tail(&urbtrack->urblist_entry,
+			      &mos_parport->deferred_urbs);
+		spin_unlock_irqrestore(&mos_parport->listlock, flags);
+		tasklet_schedule(&mos_parport->urb_tasklet);
+		dbg("tasklet scheduled");
+		return 0;
+	}
+
+	/* bail if device disconnected */
+	if (serial->disconnected) {
+		kref_put(&urbtrack->ref_count, destroy_urbtracker);
+		mutex_unlock(&serial->disc_mutex);
+		return -ENODEV;
+	}
+
+	/* add the tracker to the active_urbs list and submit */
+	spin_lock_irqsave(&mos_parport->listlock, flags);
+	list_add_tail(&urbtrack->urblist_entry, &mos_parport->active_urbs);
+	spin_unlock_irqrestore(&mos_parport->listlock, flags);
+	ret_val = usb_submit_urb(urbtrack->urb, GFP_ATOMIC);
+	mutex_unlock(&serial->disc_mutex);
+	if (ret_val) {
+		dev_err(&usbdev->dev,
+			"%s: submit_urb() failed: %d", __func__, ret_val);
+		spin_lock_irqsave(&mos_parport->listlock, flags);
+		list_del(&urbtrack->urblist_entry);
+		spin_unlock_irqrestore(&mos_parport->listlock, flags);
+		kref_put(&urbtrack->ref_count, destroy_urbtracker);
+		return ret_val;
+	}
+	return 0;
+}
+
+/*
+ * This is the the common top part of all parallel port callback operations that
+ * send synchronous messages to the device.  This implements convoluted locking
+ * that avoids two scenarios: (1) a port operation is called after usbserial
+ * has called our release function, at which point struct mos7715_parport has
+ * been destroyed, and (2) the device has been disconnected, but usbserial has
+ * not called the release function yet because someone has a serial port open.
+ * The shared release_lock prevents the first, and the mutex and disconnected
+ * flag maintained by usbserial covers the second.  We also use the msg_pending
+ * flag to ensure that all synchronous usb messgage calls have completed before
+ * our release function can return.
+ */
+static int parport_prologue(struct parport *pp)
+{
+	struct mos7715_parport *mos_parport;
+
+	spin_lock(&release_lock);
+	mos_parport = pp->private_data;
+	if (unlikely(mos_parport == NULL)) {
+		/* release fn called, port struct destroyed */
+		spin_unlock(&release_lock);
+		return -1;
+	}
+	mos_parport->msg_pending = true;   /* synch usb call pending */
+	INIT_COMPLETION(mos_parport->syncmsg_compl);
+	spin_unlock(&release_lock);
+
+	mutex_lock(&mos_parport->serial->disc_mutex);
+	if (mos_parport->serial->disconnected) {
+		/* device disconnected */
+		mutex_unlock(&mos_parport->serial->disc_mutex);
+		mos_parport->msg_pending = false;
+		complete(&mos_parport->syncmsg_compl);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * This is the the common bottom part of all parallel port functions that send
+ * synchronous messages to the device.
+ */
+static inline void parport_epilogue(struct parport *pp)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+	mutex_unlock(&mos_parport->serial->disc_mutex);
+	mos_parport->msg_pending = false;
+	complete(&mos_parport->syncmsg_compl);
+}
+
+static void parport_mos7715_write_data(struct parport *pp, unsigned char d)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+	dbg("%s called: %2.2x", __func__, d);
+	if (parport_prologue(pp) < 0)
+		return;
+	mos7715_change_mode(mos_parport, SPP);
+	write_mos_reg(mos_parport->serial, dummy, DPR, (__u8)d);
+	parport_epilogue(pp);
+}
+
+static unsigned char parport_mos7715_read_data(struct parport *pp)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+	unsigned char d;
+	dbg("%s called", __func__);
+	if (parport_prologue(pp) < 0)
+		return 0;
+	read_mos_reg(mos_parport->serial, dummy, DPR, &d);
+	parport_epilogue(pp);
+	return d;
+}
+
+static void parport_mos7715_write_control(struct parport *pp, unsigned char d)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+	__u8 data;
+	dbg("%s called: %2.2x", __func__, d);
+	if (parport_prologue(pp) < 0)
+		return;
+	data = ((__u8)d & 0x0f) | (mos_parport->shadowDCR & 0xf0);
+	write_mos_reg(mos_parport->serial, dummy, DCR, data);
+	mos_parport->shadowDCR = data;
+	parport_epilogue(pp);
+}
+
+static unsigned char parport_mos7715_read_control(struct parport *pp)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+	__u8 dcr;
+	dbg("%s called", __func__);
+	spin_lock(&release_lock);
+	mos_parport = pp->private_data;
+	if (unlikely(mos_parport == NULL)) {
+		spin_unlock(&release_lock);
+		return 0;
+	}
+	dcr = mos_parport->shadowDCR & 0x0f;
+	spin_unlock(&release_lock);
+	return dcr;
+}
+
+static unsigned char parport_mos7715_frob_control(struct parport *pp,
+						  unsigned char mask,
+						  unsigned char val)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+	__u8 dcr;
+	dbg("%s called", __func__);
+	mask &= 0x0f;
+	val &= 0x0f;
+	if (parport_prologue(pp) < 0)
+		return 0;
+	mos_parport->shadowDCR = (mos_parport->shadowDCR & (~mask)) ^ val;
+	write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
+	dcr = mos_parport->shadowDCR & 0x0f;
+	parport_epilogue(pp);
+	return dcr;
+}
+
+static unsigned char parport_mos7715_read_status(struct parport *pp)
+{
+	unsigned char status;
+	struct mos7715_parport *mos_parport = pp->private_data;
+	dbg("%s called", __func__);
+	spin_lock(&release_lock);
+	mos_parport = pp->private_data;
+	if (unlikely(mos_parport == NULL)) {	/* release called */
+		spin_unlock(&release_lock);
+		return 0;
+	}
+	status = atomic_read(&mos_parport->shadowDSR) & 0xf8;
+	spin_unlock(&release_lock);
+	return status;
+}
+
+static void parport_mos7715_enable_irq(struct parport *pp)
+{
+	dbg("%s called", __func__);
+}
+static void parport_mos7715_disable_irq(struct parport *pp)
+{
+	dbg("%s called", __func__);
+}
+
+static void parport_mos7715_data_forward(struct parport *pp)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+	dbg("%s called", __func__);
+	if (parport_prologue(pp) < 0)
+		return;
+	mos7715_change_mode(mos_parport, PS2);
+	mos_parport->shadowDCR &=  ~0x20;
+	write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
+	parport_epilogue(pp);
+}
+
+static void parport_mos7715_data_reverse(struct parport *pp)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+	dbg("%s called", __func__);
+	if (parport_prologue(pp) < 0)
+		return;
+	mos7715_change_mode(mos_parport, PS2);
+	mos_parport->shadowDCR |= 0x20;
+	write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
+	parport_epilogue(pp);
+}
+
+static void parport_mos7715_init_state(struct pardevice *dev,
+				       struct parport_state *s)
+{
+	dbg("%s called", __func__);
+	s->u.pc.ctr = DCR_INIT_VAL;
+	s->u.pc.ecr = ECR_INIT_VAL;
+}
+
+/* N.B. Parport core code requires that this function not block */
+static void parport_mos7715_save_state(struct parport *pp,
+				       struct parport_state *s)
+{
+	struct mos7715_parport *mos_parport;
+	dbg("%s called", __func__);
+	spin_lock(&release_lock);
+	mos_parport = pp->private_data;
+	if (unlikely(mos_parport == NULL)) {	/* release called */
+		spin_unlock(&release_lock);
+		return;
+	}
+	s->u.pc.ctr = mos_parport->shadowDCR;
+	s->u.pc.ecr = mos_parport->shadowECR;
+	spin_unlock(&release_lock);
+}
+
+/* N.B. Parport core code requires that this function not block */
+static void parport_mos7715_restore_state(struct parport *pp,
+					  struct parport_state *s)
+{
+	struct mos7715_parport *mos_parport;
+	dbg("%s called", __func__);
+	spin_lock(&release_lock);
+	mos_parport = pp->private_data;
+	if (unlikely(mos_parport == NULL)) {	/* release called */
+		spin_unlock(&release_lock);
+		return;
+	}
+	write_parport_reg_nonblock(mos_parport, DCR, mos_parport->shadowDCR);
+	write_parport_reg_nonblock(mos_parport, ECR, mos_parport->shadowECR);
+	spin_unlock(&release_lock);
+}
+
+static size_t parport_mos7715_write_compat(struct parport *pp,
+					   const void *buffer,
+					   size_t len, int flags)
+{
+	int retval;
+	struct mos7715_parport *mos_parport = pp->private_data;
+	int actual_len;
+	dbg("%s called: %u chars", __func__, (unsigned int)len);
+	if (parport_prologue(pp) < 0)
+		return 0;
+	mos7715_change_mode(mos_parport, PPF);
+	retval = usb_bulk_msg(mos_parport->serial->dev,
+			      usb_sndbulkpipe(mos_parport->serial->dev, 2),
+			      (void *)buffer, len, &actual_len,
+			      MOS_WDR_TIMEOUT);
+	parport_epilogue(pp);
+	if (retval) {
+		dev_err(&mos_parport->serial->dev->dev,
+			"mos7720: usb_bulk_msg() failed: %d", retval);
+		return 0;
+	}
+	return actual_len;
+}
+
+static struct parport_operations parport_mos7715_ops = {
+	.owner =		THIS_MODULE,
+	.write_data =		parport_mos7715_write_data,
+	.read_data =		parport_mos7715_read_data,
+
+	.write_control =	parport_mos7715_write_control,
+	.read_control =		parport_mos7715_read_control,
+	.frob_control =		parport_mos7715_frob_control,
+
+	.read_status =		parport_mos7715_read_status,
+
+	.enable_irq =		parport_mos7715_enable_irq,
+	.disable_irq =		parport_mos7715_disable_irq,
+
+	.data_forward =		parport_mos7715_data_forward,
+	.data_reverse =		parport_mos7715_data_reverse,
+
+	.init_state =		parport_mos7715_init_state,
+	.save_state =		parport_mos7715_save_state,
+	.restore_state =	parport_mos7715_restore_state,
+
+	.compat_write_data =	parport_mos7715_write_compat,
+
+	.nibble_read_data =	parport_ieee1284_read_nibble,
+	.byte_read_data =	parport_ieee1284_read_byte,
+};
+
+/*
+ * Allocate and initialize parallel port control struct, initialize
+ * the parallel port hardware device, and register with the parport subsystem.
+ */
+static int mos7715_parport_init(struct usb_serial *serial)
+{
+	struct mos7715_parport *mos_parport;
+
+	/* allocate and initialize parallel port control struct */
+	mos_parport = kzalloc(sizeof(struct mos7715_parport), GFP_KERNEL);
+	if (mos_parport == NULL) {
+		dbg("mos7715_parport_init: kzalloc failed");
+		return -ENOMEM;
+	}
+	mos_parport->msg_pending = false;
+	kref_init(&mos_parport->ref_count);
+	spin_lock_init(&mos_parport->listlock);
+	INIT_LIST_HEAD(&mos_parport->active_urbs);
+	INIT_LIST_HEAD(&mos_parport->deferred_urbs);
+	usb_set_serial_data(serial, mos_parport); /* hijack private pointer */
+	mos_parport->serial = serial;
+	tasklet_init(&mos_parport->urb_tasklet, send_deferred_urbs,
+		     (unsigned long) mos_parport);
+	init_completion(&mos_parport->syncmsg_compl);
+
+	/* cycle parallel port reset bit */
+	write_mos_reg(mos_parport->serial, dummy, PP_REG, (__u8)0x80);
+	write_mos_reg(mos_parport->serial, dummy, PP_REG, (__u8)0x00);
+
+	/* initialize device registers */
+	mos_parport->shadowDCR = DCR_INIT_VAL;
+	write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
+	mos_parport->shadowECR = ECR_INIT_VAL;
+	write_mos_reg(mos_parport->serial, dummy, ECR, mos_parport->shadowECR);
+
+	/* register with parport core */
+	mos_parport->pp = parport_register_port(0, PARPORT_IRQ_NONE,
+						PARPORT_DMA_NONE,
+						&parport_mos7715_ops);
+	if (mos_parport->pp == NULL) {
+		dev_err(&serial->interface->dev,
+			"Could not register parport\n");
+		kref_put(&mos_parport->ref_count, destroy_mos_parport);
+		return -EIO;
+	}
+	mos_parport->pp->private_data = mos_parport;
+	mos_parport->pp->modes = PARPORT_MODE_COMPAT | PARPORT_MODE_PCSPP;
+	mos_parport->pp->dev = &serial->interface->dev;
+	parport_announce_port(mos_parport->pp);
+
+	return 0;
+}
+#endif	/* CONFIG_USB_SERIAL_MOS7715_PARPORT */
 
 /*
  * mos7720_interrupt_callback
@@ -109,8 +753,6 @@ static void mos7720_interrupt_callback(struct urb *urb)
 	__u8 sp1;
 	__u8 sp2;
 
-	dbg(" : Entering");
-
 	switch (status) {
 	case 0:
 		/* success */
@@ -161,7 +803,7 @@ static void mos7720_interrupt_callback(struct urb *urb)
 			dbg("Serial Port 1: Receiver time out");
 			break;
 		case SERIAL_IIR_MS:
-			dbg("Serial Port 1: Modem status change");
+			/* dbg("Serial Port 1: Modem status change"); */
 			break;
 		}
 
@@ -174,7 +816,7 @@ static void mos7720_interrupt_callback(struct urb *urb)
 			dbg("Serial Port 2: Receiver time out");
 			break;
 		case SERIAL_IIR_MS:
-			dbg("Serial Port 2: Modem status change");
+			/* dbg("Serial Port 2: Modem status change"); */
 			break;
 		}
 	}
@@ -208,6 +850,7 @@ static void mos7715_interrupt_callback(struct urb *urb)
 	case -ECONNRESET:
 	case -ENOENT:
 	case -ESHUTDOWN:
+	case -ENODEV:
 		/* this urb is terminated, clean up */
 		dbg("%s - urb shutting down with status: %d", __func__,
 		    status);
@@ -243,11 +886,21 @@ static void mos7715_interrupt_callback(struct urb *urb)
 			dbg("Serial Port: Receiver time out");
 			break;
 		case SERIAL_IIR_MS:
-			dbg("Serial Port: Modem status change");
+			/* dbg("Serial Port: Modem status change"); */
 			break;
 		}
 	}
 
+#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
+	{       /* update local copy of DSR reg */
+		struct usb_serial_port *port = urb->context;
+		struct mos7715_parport *mos_parport = port->serial->private;
+		if (unlikely(mos_parport == NULL))
+			return;
+		atomic_set(&mos_parport->shadowDSR, data[2]);
+	}
+#endif
+
 exit:
 	result = usb_submit_urb(urb, GFP_ATOMIC);
 	if (result)
@@ -267,7 +920,6 @@ static void mos7720_bulk_in_callback(struct urb *urb)
 	int retval;
 	unsigned char *data ;
 	struct usb_serial_port *port;
-	struct moschip_port *mos7720_port;
 	struct tty_struct *tty;
 	int status = urb->status;
 
@@ -276,13 +928,7 @@ static void mos7720_bulk_in_callback(struct urb *urb)
 		return;
 	}
 
-	mos7720_port = urb->context;
-	if (!mos7720_port) {
-		dbg("NULL mos7720_port pointer");
-		return ;
-	}
-
-	port = mos7720_port->port;
+	port = urb->context;
 
 	dbg("Entering...%s", __func__);
 
@@ -332,8 +978,6 @@ static void mos7720_bulk_out_data_callback(struct urb *urb)
 		return ;
 	}
 
-	dbg("Entering .........");
-
 	tty = tty_port_tty_get(&mos7720_port->port->port);
 
 	if (tty && mos7720_port->open)
@@ -342,56 +986,6 @@ static void mos7720_bulk_out_data_callback(struct urb *urb)
 }
 
 /*
- * send_mos_cmd
- *	this function will be used for sending command to device
- */
-static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value,
-			__u16 index, u8 *data)
-{
-	int status;
-	u8 *buf;
-	u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
-
-	if (value < MOS_MAX_PORT) {
-		if (product == MOSCHIP_DEVICE_ID_7715)
-			value = 0x0200; /* identifies the 7715's serial port */
-		else
-			value = value*0x100+0x200;
-	} else {
-		value = 0x0000;
-		if ((product == MOSCHIP_DEVICE_ID_7715) &&
-		    (index != 0x08)) {
-			dbg("serial->product== MOSCHIP_DEVICE_ID_7715");
-			/* index = 0x01 ; */
-		}
-	}
-
-	if (request == MOS_WRITE) {
-		value = value + *data;
-		status = usb_control_msg(serial->dev,
-				usb_sndctrlpipe(serial->dev, 0), MOS_WRITE,
-				0x40, value, index, NULL, 0, MOS_WDR_TIMEOUT);
-	} else {
-		buf = kmalloc(1, GFP_KERNEL);
-		if (!buf) {
-			status = -ENOMEM;
-			goto out;
-		}
-		status = usb_control_msg(serial->dev,
-				usb_rcvctrlpipe(serial->dev, 0), MOS_READ,
-				0xc0, value, index, buf, 1, MOS_WDR_TIMEOUT);
-		*data = *buf;
-		kfree(buf);
-	}
-out:
-	if (status < 0)
-		dbg("Command Write failed Value %x index %x", value, index);
-
-	return status;
-}
-
-
-/*
  * mos77xx_probe
  *	this function installs the appropriate read interrupt endpoint callback
  *	depending on whether the device is a 7720 or 7715, thus avoiding costly
@@ -424,11 +1018,10 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
 	struct usb_serial *serial;
 	struct usb_serial_port *port0;
 	struct urb *urb;
-	struct moschip_serial *mos7720_serial;
 	struct moschip_port *mos7720_port;
 	int response;
 	int port_number;
-	char data;
+	__u8 data;
 	int allocated_urbs = 0;
 	int j;
 
@@ -440,11 +1033,6 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	port0 = serial->port[0];
 
-	mos7720_serial = usb_get_serial_data(serial);
-
-	if (mos7720_serial == NULL || port0 == NULL)
-		return -ENODEV;
-
 	usb_clear_halt(serial->dev, port->write_urb->pipe);
 	usb_clear_halt(serial->dev, port->read_urb->pipe);
 
@@ -489,103 +1077,36 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
 	  * 0x08 : SP1/2 Control Reg
 	  */
 	port_number = port->number - port->serial->minor;
-	send_mos_cmd(port->serial, MOS_READ, port_number, UART_LSR, &data);
+	read_mos_reg(serial, port_number, LSR, &data);
+
 	dbg("SS::%p LSR:%x", mos7720_port, data);
 
 	dbg("Check:Sending Command ..........");
 
-	data = 0x02;
-	send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x01, &data);
-	data = 0x02;
-	send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x02, &data);
+	write_mos_reg(serial, dummy, SP1_REG, 0x02);
+	write_mos_reg(serial, dummy, SP2_REG, 0x02);
 
-	data = 0x00;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
-	data = 0x00;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data);
+	write_mos_reg(serial, port_number, IER, 0x00);
+	write_mos_reg(serial, port_number, FCR, 0x00);
 
-	data = 0xCF;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data);
-	data = 0x03;
-	mos7720_port->shadowLCR  = data;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
-	data = 0x0b;
-	mos7720_port->shadowMCR  = data;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
-	data = 0x0b;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
-
-	data = 0x00;
-	send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data);
-	data = 0x00;
-	send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data);
-
-/*	data = 0x00;
-	send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, port_number + 1, &data);
-	data = 0x03;
-	send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data);
-	data = 0x00;
-	send_mos_cmd(port->serial, MOS_WRITE, MOS_MAX_PORT,
-						port_number + 1, &data);
-*/
-	data = 0x00;
-	send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data);
+	write_mos_reg(serial, port_number, FCR, 0xcf);
+	mos7720_port->shadowLCR = 0x03;
+	write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
+	mos7720_port->shadowMCR = 0x0b;
+	write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
 
+	write_mos_reg(serial, port_number, SP_CONTROL_REG, 0x00);
+	read_mos_reg(serial, dummy, SP_CONTROL_REG, &data);
 	data = data | (port->number - port->serial->minor + 1);
-	send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data);
+	write_mos_reg(serial, dummy, SP_CONTROL_REG, data);
+	mos7720_port->shadowLCR = 0x83;
+	write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
+	write_mos_reg(serial, port_number, THR, 0x0c);
+	write_mos_reg(serial, port_number, IER, 0x00);
+	mos7720_port->shadowLCR = 0x03;
+	write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
+	write_mos_reg(serial, port_number, IER, 0x0c);
 
-	data = 0x83;
-	mos7720_port->shadowLCR  = data;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
-	data = 0x0c;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data);
-	data = 0x00;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
-	data = 0x03;
-	mos7720_port->shadowLCR  = data;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
-	data = 0x0c;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
-	data = 0x0c;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
-
-	/* see if we've set up our endpoint info yet   *
-	 * (can't set it up in mos7720_startup as the  *
-	 * structures were not set up at that time.)   */
-	if (!mos7720_serial->interrupt_started) {
-		dbg("Interrupt buffer NULL !!!");
-
-		/* not set up yet, so do it now */
-		mos7720_serial->interrupt_started = 1;
-
-		dbg("To Submit URB !!!");
-
-		/* set up our interrupt urb */
-		usb_fill_int_urb(port0->interrupt_in_urb, serial->dev,
-			 usb_rcvintpipe(serial->dev,
-				port->interrupt_in_endpointAddress),
-			 port0->interrupt_in_buffer,
-			 port0->interrupt_in_urb->transfer_buffer_length,
-			 mos7720_interrupt_callback, mos7720_port,
-			 port0->interrupt_in_urb->interval);
-
-		/* start interrupt read for this mos7720 this interrupt *
-		 * will continue as long as the mos7720 is connected    */
-		dbg("Submit URB over !!!");
-		response = usb_submit_urb(port0->interrupt_in_urb, GFP_KERNEL);
-		if (response)
-			dev_err(&port->dev,
-				"%s - Error %d submitting control urb\n",
-				__func__, response);
-	}
-
-	/* set up our bulk in urb */
-	usb_fill_bulk_urb(port->read_urb, serial->dev,
-			  usb_rcvbulkpipe(serial->dev,
-				port->bulk_in_endpointAddress),
-			  port->bulk_in_buffer,
-			  port->read_urb->transfer_buffer_length,
-			  mos7720_bulk_in_callback, mos7720_port);
 	response = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (response)
 		dev_err(&port->dev, "%s - Error %d submitting read urb\n",
@@ -640,7 +1161,6 @@ static void mos7720_close(struct usb_serial_port *port)
 {
 	struct usb_serial *serial;
 	struct moschip_port *mos7720_port;
-	char data;
 	int j;
 
 	dbg("mos7720_close:entering...");
@@ -673,13 +1193,10 @@ static void mos7720_close(struct usb_serial_port *port)
 	/* these commands must not be issued if the device has
 	 * been disconnected */
 	if (!serial->disconnected) {
-		data = 0x00;
-		send_mos_cmd(serial, MOS_WRITE,
-			port->number - port->serial->minor, 0x04, &data);
-
-		data = 0x00;
-		send_mos_cmd(serial, MOS_WRITE,
-			port->number - port->serial->minor, 0x01, &data);
+		write_mos_reg(serial, port->number - port->serial->minor,
+			      MCR, 0x00);
+		write_mos_reg(serial, port->number - port->serial->minor,
+			      IER, 0x00);
 	}
 	mutex_unlock(&serial->disc_mutex);
 	mos7720_port->open = 0;
@@ -708,8 +1225,8 @@ static void mos7720_break(struct tty_struct *tty, int break_state)
 		data = mos7720_port->shadowLCR & ~UART_LCR_SBC;
 
 	mos7720_port->shadowLCR  = data;
-	send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor,
-		     0x03, &data);
+	write_mos_reg(serial, port->number - port->serial->minor,
+		      LCR, mos7720_port->shadowLCR);
 
 	return;
 }
@@ -854,9 +1371,8 @@ static void mos7720_throttle(struct tty_struct *tty)
 	/* if we are implementing RTS/CTS, toggle that line */
 	if (tty->termios->c_cflag & CRTSCTS) {
 		mos7720_port->shadowMCR &= ~UART_MCR_RTS;
-		status = send_mos_cmd(port->serial, MOS_WRITE,
-				      port->number - port->serial->minor,
-				      UART_MCR, &mos7720_port->shadowMCR);
+		write_mos_reg(port->serial, port->number - port->serial->minor,
+			      MCR, mos7720_port->shadowMCR);
 		if (status != 0)
 			return;
 	}
@@ -889,22 +1405,21 @@ static void mos7720_unthrottle(struct tty_struct *tty)
 	/* if we are implementing RTS/CTS, toggle that line */
 	if (tty->termios->c_cflag & CRTSCTS) {
 		mos7720_port->shadowMCR |= UART_MCR_RTS;
-		status = send_mos_cmd(port->serial, MOS_WRITE,
-				      port->number - port->serial->minor,
-				      UART_MCR, &mos7720_port->shadowMCR);
+		write_mos_reg(port->serial, port->number - port->serial->minor,
+			      MCR, mos7720_port->shadowMCR);
 		if (status != 0)
 			return;
 	}
 }
 
+/* FIXME: this function does not work */
 static int set_higher_rates(struct moschip_port *mos7720_port,
 			    unsigned int baud)
 {
-	unsigned char data;
 	struct usb_serial_port *port;
 	struct usb_serial *serial;
 	int port_number;
-
+	enum mos_regs sp_reg;
 	if (mos7720_port == NULL)
 		return -EINVAL;
 
@@ -917,58 +1432,35 @@ static int set_higher_rates(struct moschip_port *mos7720_port,
 	dbg("Sending Setting Commands ..........");
 	port_number = port->number - port->serial->minor;
 
-	data = 0x000;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
-	data = 0x000;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data);
-	data = 0x0CF;
-	send_mos_cmd(serial, MOS_WRITE, port->number, 0x02, &data);
-	data = 0x00b;
-	mos7720_port->shadowMCR  = data;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
-	data = 0x00b;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
-
-	data = 0x000;
-	send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data);
-	data = 0x000;
-	send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data);
-
+	write_mos_reg(serial, port_number, IER, 0x00);
+	write_mos_reg(serial, port_number, FCR, 0x00);
+	write_mos_reg(serial, port_number, FCR, 0xcf);
+	mos7720_port->shadowMCR = 0x0b;
+	write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
+	write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x00);
 
 	/***********************************************
 	 *              Set for higher rates           *
 	 ***********************************************/
-
-	data = baud * 0x10;
-	send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data);
-
-	data = 0x003;
-	send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data);
-	data = 0x003;
-	send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data);
-
-	data = 0x02b;
-	mos7720_port->shadowMCR  = data;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
-	data = 0x02b;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
+	/* writing baud rate verbatum into uart clock field clearly not right */
+	if (port_number == 0)
+		sp_reg = SP1_REG;
+	else
+		sp_reg = SP2_REG;
+	write_mos_reg(serial, dummy, sp_reg, baud * 0x10);
+	write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x03);
+	mos7720_port->shadowMCR = 0x2b;
+	write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
 
 	/***********************************************
 	 *              Set DLL/DLM
 	 ***********************************************/
-
-	data = mos7720_port->shadowLCR | UART_LCR_DLAB;
-	mos7720_port->shadowLCR  = data;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
-
-	data =  0x001; /* DLL */
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data);
-	data =  0x000; /* DLM */
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
-
-	data = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
-	mos7720_port->shadowLCR  = data;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
+	mos7720_port->shadowLCR = mos7720_port->shadowLCR | UART_LCR_DLAB;
+	write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
+	write_mos_reg(serial, port_number, DLL, 0x01);
+	write_mos_reg(serial, port_number, DLM, 0x00);
+	mos7720_port->shadowLCR = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
+	write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
 
 	return 0;
 }
@@ -1056,7 +1548,6 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port,
 	struct usb_serial *serial;
 	int divisor;
 	int status;
-	unsigned char data;
 	unsigned char number;
 
 	if (mos7720_port == NULL)
@@ -1078,21 +1569,16 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port,
 	}
 
 	/* Enable access to divisor latch */
-	data = mos7720_port->shadowLCR | UART_LCR_DLAB;
-	mos7720_port->shadowLCR  = data;
-	send_mos_cmd(serial, MOS_WRITE, number, UART_LCR, &data);
+	mos7720_port->shadowLCR = mos7720_port->shadowLCR | UART_LCR_DLAB;
+	write_mos_reg(serial, number, LCR, mos7720_port->shadowLCR);
 
 	/* Write the divisor */
-	data = ((unsigned char)(divisor & 0xff));
-	send_mos_cmd(serial, MOS_WRITE, number, 0x00, &data);
-
-	data = ((unsigned char)((divisor & 0xff00) >> 8));
-	send_mos_cmd(serial, MOS_WRITE, number, 0x01, &data);
+	write_mos_reg(serial, number, DLL, (__u8)(divisor & 0xff));
+	write_mos_reg(serial, number, DLM, (__u8)((divisor & 0xff00) >> 8));
 
 	/* Disable access to divisor latch */
-	data = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
-	mos7720_port->shadowLCR = data;
-	send_mos_cmd(serial, MOS_WRITE, number, 0x03, &data);
+	mos7720_port->shadowLCR = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
+	write_mos_reg(serial, number, LCR, mos7720_port->shadowLCR);
 
 	return status;
 }
@@ -1117,7 +1603,6 @@ static void change_port_settings(struct tty_struct *tty,
 	__u8 lStop;
 	int status;
 	int port_number;
-	char data;
 
 	if (mos7720_port == NULL)
 		return ;
@@ -1196,30 +1681,19 @@ static void change_port_settings(struct tty_struct *tty,
 
 	/* Update the LCR with the correct value */
 	mos7720_port->shadowLCR &=
-			~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
+		~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
 	mos7720_port->shadowLCR |= (lData | lParity | lStop);
 
 
 	/* Disable Interrupts */
-	data = 0x00;
-	send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor,
-							UART_IER, &data);
-
-	data = 0x00;
-	send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data);
-
-	data = 0xcf;
-	send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data);
+	write_mos_reg(serial, port_number, IER, 0x00);
+	write_mos_reg(serial, port_number, FCR, 0x00);
+	write_mos_reg(serial, port_number, FCR, 0xcf);
 
 	/* Send the updated LCR value to the mos7720 */
-	data = mos7720_port->shadowLCR;
-	send_mos_cmd(serial, MOS_WRITE, port_number, UART_LCR, &data);
-
-	data = 0x00b;
-	mos7720_port->shadowMCR = data;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
-	data = 0x00b;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
+	write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
+	mos7720_port->shadowMCR = 0x0b;
+	write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
 
 	/* set up the MCR register and send it to the mos7720 */
 	mos7720_port->shadowMCR = UART_MCR_OUT2;
@@ -1230,21 +1704,15 @@ static void change_port_settings(struct tty_struct *tty,
 		mos7720_port->shadowMCR |= (UART_MCR_XONANY);
 		/* To set hardware flow control to the specified *
 		 * serial port, in SP1/2_CONTROL_REG             */
-		if (port->number) {
-			data = 0x001;
-			send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT,
-				     0x08, &data);
-		} else {
-			data = 0x002;
-			send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT,
-				     0x08, &data);
-		}
-	} else {
+		if (port->number)
+			write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01);
+		else
+			write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02);
+
+	} else
 		mos7720_port->shadowMCR &= ~(UART_MCR_XONANY);
-	}
 
-	data = mos7720_port->shadowMCR;
-	send_mos_cmd(serial, MOS_WRITE, port_number, UART_MCR, &data);
+	write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
 
 	/* Determine divisor based on baud rate */
 	baud = tty_get_baud_rate(tty);
@@ -1257,8 +1725,7 @@ static void change_port_settings(struct tty_struct *tty,
 	if (baud >= 230400) {
 		set_higher_rates(mos7720_port, baud);
 		/* Enable Interrupts */
-		data = 0x0c;
-		send_mos_cmd(serial, MOS_WRITE, port_number, UART_IER, &data);
+		write_mos_reg(serial, port_number, IER, 0x0c);
 		return;
 	}
 
@@ -1269,8 +1736,7 @@ static void change_port_settings(struct tty_struct *tty,
 	if (cflag & CBAUD)
 		tty_encode_baud_rate(tty, baud, baud);
 	/* Enable Interrupts */
-	data = 0x0c;
-	send_mos_cmd(serial, MOS_WRITE, port_number, UART_IER, &data);
+	write_mos_reg(serial, port_number, IER, 0x0c);
 
 	if (port->read_urb->status != -EINPROGRESS) {
 		port->read_urb->dev = serial->dev;
@@ -1308,7 +1774,7 @@ static void mos7720_set_termios(struct tty_struct *tty,
 		return;
 	}
 
-	dbg("setting termios - ASPIRE");
+	dbg("%s\n", "setting termios - ASPIRE");
 
 	cflag = tty->termios->c_cflag;
 
@@ -1326,7 +1792,7 @@ static void mos7720_set_termios(struct tty_struct *tty,
 	change_port_settings(tty, mos7720_port, old_termios);
 
 	if (!port->read_urb) {
-		dbg("URB KILLED !!!!!");
+		dbg("%s", "URB KILLED !!!!!");
 		return;
 	}
 
@@ -1361,8 +1827,7 @@ static int get_lsr_info(struct tty_struct *tty,
 
 	count = mos7720_chars_in_buffer(tty);
 	if (count == 0) {
-		send_mos_cmd(port->serial, MOS_READ, port_number,
-							UART_LSR, &data);
+		read_mos_reg(port->serial, port_number, LSR, &data);
 		if ((data & (UART_LSR_TEMT | UART_LSR_THRE))
 					== (UART_LSR_TEMT | UART_LSR_THRE)) {
 			dbg("%s -- Empty", __func__);
@@ -1400,13 +1865,11 @@ static int mos7720_tiocmget(struct tty_struct *tty, struct file *file)
 }
 
 static int mos7720_tiocmset(struct tty_struct *tty, struct file *file,
-					unsigned int set, unsigned int clear)
+			    unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
 	unsigned int mcr ;
-	unsigned char lmcr;
-
 	dbg("%s - port %d", __func__, port->number);
 	dbg("he was at tiocmget");
 
@@ -1427,10 +1890,8 @@ static int mos7720_tiocmset(struct tty_struct *tty, struct file *file,
 		mcr &= ~UART_MCR_LOOP;
 
 	mos7720_port->shadowMCR = mcr;
-	lmcr = mos7720_port->shadowMCR;
-
-	send_mos_cmd(port->serial, MOS_WRITE,
-		port->number - port->serial->minor, UART_MCR, &lmcr);
+	write_mos_reg(port->serial, port->number - port->serial->minor,
+		      MCR, mos7720_port->shadowMCR);
 
 	return 0;
 }
@@ -1440,7 +1901,6 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
 {
 	unsigned int mcr ;
 	unsigned int arg;
-	unsigned char data;
 
 	struct usb_serial_port *port;
 
@@ -1475,10 +1935,8 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
 	}
 
 	mos7720_port->shadowMCR = mcr;
-
-	data = mos7720_port->shadowMCR;
-	send_mos_cmd(port->serial, MOS_WRITE,
-		     port->number - port->serial->minor, UART_MCR, &data);
+	write_mos_reg(port->serial, port->number - port->serial->minor,
+		      MCR, mos7720_port->shadowMCR);
 
 	return 0;
 }
@@ -1590,12 +2048,12 @@ static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
 
 static int mos7720_startup(struct usb_serial *serial)
 {
-	struct moschip_serial *mos7720_serial;
 	struct moschip_port *mos7720_port;
 	struct usb_device *dev;
 	int i;
 	char data;
 	u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
+	int ret_val;
 
 	dbg("%s: Entering ..........", __func__);
 
@@ -1606,15 +2064,6 @@ static int mos7720_startup(struct usb_serial *serial)
 
 	dev = serial->dev;
 
-	/* create our private serial structure */
-	mos7720_serial = kzalloc(sizeof(struct moschip_serial), GFP_KERNEL);
-	if (mos7720_serial == NULL) {
-		dev_err(&dev->dev, "%s - Out of memory\n", __func__);
-		return -ENOMEM;
-	}
-
-	usb_set_serial_data(serial, mos7720_serial);
-
 	/*
 	 * The 7715 uses the first bulk in/out endpoint pair for the parallel
 	 * port, and the second for the serial port.  Because the usbserial core
@@ -1638,16 +2087,12 @@ static int mos7720_startup(struct usb_serial *serial)
 		serial->port[1]->interrupt_in_buffer = NULL;
 	}
 
-	/* we set up the pointers to the endpoints in the mos7720_open *
-	 * function, as the structures aren't created yet.             */
 
-	/* set up port private structures */
+	/* set up serial port private structures */
 	for (i = 0; i < serial->num_ports; ++i) {
 		mos7720_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
 		if (mos7720_port == NULL) {
 			dev_err(&dev->dev, "%s - Out of memory\n", __func__);
-			usb_set_serial_data(serial, NULL);
-			kfree(mos7720_serial);
 			return -ENOMEM;
 		}
 
@@ -1669,12 +2114,22 @@ static int mos7720_startup(struct usb_serial *serial)
 	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			(__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ);
 
-	/* LSR For Port 1 */
-	send_mos_cmd(serial, MOS_READ, 0x00, UART_LSR, &data);
-	dbg("LSR:%x", data);
+	/* start the interrupt urb */
+	ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
+	if (ret_val)
+		dev_err(&dev->dev,
+			"%s - Error %d submitting control urb\n",
+			__func__, ret_val);
 
-	/* LSR For Port 2 */
-	send_mos_cmd(serial, MOS_READ, 0x01, UART_LSR, &data);
+#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
+	if (product == MOSCHIP_DEVICE_ID_7715) {
+		ret_val = mos7715_parport_init(serial);
+		if (ret_val < 0)
+			return ret_val;
+	}
+#endif
+	/* LSR For Port 1 */
+	read_mos_reg(serial, 0, LSR, &data);
 	dbg("LSR:%x", data);
 
 	return 0;
@@ -1684,12 +2139,47 @@ static void mos7720_release(struct usb_serial *serial)
 {
 	int i;
 
+#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
+	/* close the parallel port */
+
+	if (le16_to_cpu(serial->dev->descriptor.idProduct)
+	    == MOSCHIP_DEVICE_ID_7715) {
+		struct urbtracker *urbtrack;
+		unsigned long flags;
+		struct mos7715_parport *mos_parport =
+			usb_get_serial_data(serial);
+
+		/* prevent NULL ptr dereference in port callbacks */
+		spin_lock(&release_lock);
+		mos_parport->pp->private_data = NULL;
+		spin_unlock(&release_lock);
+
+		/* wait for synchronous usb calls to return */
+		if (mos_parport->msg_pending)
+			wait_for_completion_timeout(&mos_parport->syncmsg_compl,
+						    MOS_WDR_TIMEOUT);
+
+		parport_remove_port(mos_parport->pp);
+		usb_set_serial_data(serial, NULL);
+		mos_parport->serial = NULL;
+
+		/* if tasklet currently scheduled, wait for it to complete */
+		tasklet_kill(&mos_parport->urb_tasklet);
+
+		/* unlink any urbs sent by the tasklet  */
+		spin_lock_irqsave(&mos_parport->listlock, flags);
+		list_for_each_entry(urbtrack,
+				    &mos_parport->active_urbs,
+				    urblist_entry)
+			usb_unlink_urb(urbtrack->urb);
+		spin_unlock_irqrestore(&mos_parport->listlock, flags);
+
+		kref_put(&mos_parport->ref_count, destroy_mos_parport);
+	}
+#endif
 	/* free private structure allocated for serial port */
 	for (i = 0; i < serial->num_ports; ++i)
 		kfree(usb_get_serial_port_data(serial->port[i]));
-
-	/* free private structure allocated for serial device */
-	kfree(usb_get_serial_data(serial));
 }
 
 static struct usb_driver usb_driver = {
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 2fda1c0182b..f8424d1bfc1 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -26,7 +26,6 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index ca9d866672a..e280ad8e12f 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -42,35 +42,14 @@
 #include <linux/bitops.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
+#include "usb-wwan.h"
 
 /* Function prototypes */
 static int  option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id);
-static int  option_open(struct tty_struct *tty, struct usb_serial_port *port);
-static void option_close(struct usb_serial_port *port);
-static void option_dtr_rts(struct usb_serial_port *port, int on);
-
-static int  option_startup(struct usb_serial *serial);
-static void option_disconnect(struct usb_serial *serial);
-static void option_release(struct usb_serial *serial);
-static int  option_write_room(struct tty_struct *tty);
-
+static int option_send_setup(struct usb_serial_port *port);
 static void option_instat_callback(struct urb *urb);
 
-static int option_write(struct tty_struct *tty, struct usb_serial_port *port,
-			const unsigned char *buf, int count);
-static int  option_chars_in_buffer(struct tty_struct *tty);
-static void option_set_termios(struct tty_struct *tty,
-			struct usb_serial_port *port, struct ktermios *old);
-static int  option_tiocmget(struct tty_struct *tty, struct file *file);
-static int  option_tiocmset(struct tty_struct *tty, struct file *file,
-				unsigned int set, unsigned int clear);
-static int  option_send_setup(struct usb_serial_port *port);
-#ifdef CONFIG_PM
-static int  option_suspend(struct usb_serial *serial, pm_message_t message);
-static int  option_resume(struct usb_serial *serial);
-#endif
-
 /* Vendor and product IDs */
 #define OPTION_VENDOR_ID			0x0AF0
 #define OPTION_PRODUCT_COLT			0x5000
@@ -305,6 +284,11 @@ static int  option_resume(struct usb_serial *serial);
 #define ZTE_PRODUCT_CDMA_TECH			0xfffe
 #define ZTE_PRODUCT_AC8710			0xfff1
 #define ZTE_PRODUCT_AC2726			0xfff5
+#define ZTE_PRODUCT_AC8710T			0xffff
+
+/* ZTE PRODUCTS -- alternate vendor ID */
+#define ZTE_VENDOR_ID2				0x1d6b
+#define ZTE_PRODUCT_MF_330			0x0002
 
 #define BENQ_VENDOR_ID				0x04a5
 #define BENQ_PRODUCT_H10			0x4068
@@ -373,6 +357,12 @@ static int  option_resume(struct usb_serial *serial);
 #define HAIER_VENDOR_ID				0x201e
 #define HAIER_PRODUCT_CE100			0x2009
 
+#define CINTERION_VENDOR_ID			0x0681
+
+/* Olivetti products */
+#define OLIVETTI_VENDOR_ID			0x0b3c
+#define OLIVETTI_PRODUCT_OLICARD100		0xc000
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
 		OPTION_BLACKLIST_NONE = 0,
@@ -668,6 +658,180 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0160, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1060, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1061, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1062, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1063, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1064, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1065, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1066, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1067, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1068, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1069, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1070, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1071, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1072, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1073, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1074, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1075, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1076, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1077, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1078, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1079, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1080, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1081, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1082, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1083, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1084, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1085, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1086, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1087, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1088, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1089, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1090, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1091, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1092, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1093, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1094, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1095, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1096, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1097, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1098, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1099, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1100, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1101, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1102, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1103, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1104, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1105, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1106, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1107, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1108, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1109, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1110, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1111, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1112, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1113, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1114, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1115, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1116, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1117, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1118, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1119, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1120, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1121, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1122, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1123, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1124, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1125, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1126, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1127, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1128, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1129, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1130, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1131, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1132, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1133, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1134, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1135, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1136, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1137, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1138, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1139, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1140, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1141, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1142, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1143, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1144, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1145, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1146, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1147, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1148, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1149, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1150, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1151, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1152, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1153, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1154, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1155, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1156, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1157, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1158, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1159, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1160, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1161, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1162, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1163, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1164, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1165, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1166, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1167, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1168, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1169, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1170, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1244, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1245, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1246, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1247, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1248, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1249, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1250, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1251, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1252, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1253, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1254, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1255, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1256, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1257, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1258, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1259, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1260, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1261, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1262, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1263, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1264, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1265, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1266, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1267, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1268, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1269, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1270, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1271, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1272, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1273, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1274, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1275, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1276, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1277, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1278, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1279, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1280, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1281, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1282, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1283, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1284, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1285, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1286, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1287, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1288, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1289, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1290, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1291, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1292, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1293, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1294, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1295, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1296, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1297, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
@@ -679,6 +843,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE(ZTE_VENDOR_ID2, ZTE_PRODUCT_MF_330) },
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
 	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
 	{ USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */
@@ -716,6 +882,9 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1011)},
 	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012)},
 
+	{ USB_DEVICE(CINTERION_VENDOR_ID, 0x0047) },
+
+	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
@@ -747,22 +916,22 @@ static struct usb_serial_driver option_1port_device = {
 	.id_table          = option_ids,
 	.num_ports         = 1,
 	.probe             = option_probe,
-	.open              = option_open,
-	.close             = option_close,
-	.dtr_rts	   = option_dtr_rts,
-	.write             = option_write,
-	.write_room        = option_write_room,
-	.chars_in_buffer   = option_chars_in_buffer,
-	.set_termios       = option_set_termios,
-	.tiocmget          = option_tiocmget,
-	.tiocmset          = option_tiocmset,
-	.attach            = option_startup,
-	.disconnect        = option_disconnect,
-	.release           = option_release,
+	.open              = usb_wwan_open,
+	.close             = usb_wwan_close,
+	.dtr_rts	   = usb_wwan_dtr_rts,
+	.write             = usb_wwan_write,
+	.write_room        = usb_wwan_write_room,
+	.chars_in_buffer   = usb_wwan_chars_in_buffer,
+	.set_termios       = usb_wwan_set_termios,
+	.tiocmget          = usb_wwan_tiocmget,
+	.tiocmset          = usb_wwan_tiocmset,
+	.attach            = usb_wwan_startup,
+	.disconnect        = usb_wwan_disconnect,
+	.release           = usb_wwan_release,
 	.read_int_callback = option_instat_callback,
 #ifdef CONFIG_PM
-	.suspend           = option_suspend,
-	.resume            = option_resume,
+	.suspend           = usb_wwan_suspend,
+	.resume            = usb_wwan_resume,
 #endif
 };
 
@@ -775,13 +944,6 @@ static int debug;
 #define IN_BUFLEN 4096
 #define OUT_BUFLEN 4096
 
-struct option_intf_private {
-	spinlock_t susp_lock;
-	unsigned int suspended:1;
-	int in_flight;
-	struct option_blacklist_info *blacklist_info;
-};
-
 struct option_port_private {
 	/* Input endpoints and buffer for this port */
 	struct urb *in_urbs[N_IN_URB];
@@ -838,8 +1000,7 @@ module_exit(option_exit);
 static int option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id)
 {
-	struct option_intf_private *data;
-
+	struct usb_wwan_intf_private *data;
 	/* D-Link DWM 652 still exposes CD-Rom emulation interface in modem mode */
 	if (serial->dev->descriptor.idVendor == DLINK_VENDOR_ID &&
 		serial->dev->descriptor.idProduct == DLINK_PRODUCT_DWM_652 &&
@@ -852,11 +1013,13 @@ static int option_probe(struct usb_serial *serial,
 		serial->interface->cur_altsetting->desc.bInterfaceClass != 0xff)
 		return -ENODEV;
 
-	data = serial->private = kzalloc(sizeof(struct option_intf_private), GFP_KERNEL);
+	data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
+
 	if (!data)
 		return -ENOMEM;
+	data->send_setup = option_send_setup;
 	spin_lock_init(&data->susp_lock);
-	data->blacklist_info = (struct option_blacklist_info*) id->driver_info;
+	data->private = (void *)id->driver_info;
 	return 0;
 }
 
@@ -877,194 +1040,6 @@ static enum option_blacklist_reason is_blacklisted(const u8 ifnum,
 	return OPTION_BLACKLIST_NONE;
 }
 
-static void option_set_termios(struct tty_struct *tty,
-		struct usb_serial_port *port, struct ktermios *old_termios)
-{
-	dbg("%s", __func__);
-	/* Doesn't support option setting */
-	tty_termios_copy_hw(tty->termios, old_termios);
-	option_send_setup(port);
-}
-
-static int option_tiocmget(struct tty_struct *tty, struct file *file)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	unsigned int value;
-	struct option_port_private *portdata;
-
-	portdata = usb_get_serial_port_data(port);
-
-	value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
-		((portdata->dtr_state) ? TIOCM_DTR : 0) |
-		((portdata->cts_state) ? TIOCM_CTS : 0) |
-		((portdata->dsr_state) ? TIOCM_DSR : 0) |
-		((portdata->dcd_state) ? TIOCM_CAR : 0) |
-		((portdata->ri_state) ? TIOCM_RNG : 0);
-
-	return value;
-}
-
-static int option_tiocmset(struct tty_struct *tty, struct file *file,
-			unsigned int set, unsigned int clear)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct option_port_private *portdata;
-
-	portdata = usb_get_serial_port_data(port);
-
-	/* FIXME: what locks portdata fields ? */
-	if (set & TIOCM_RTS)
-		portdata->rts_state = 1;
-	if (set & TIOCM_DTR)
-		portdata->dtr_state = 1;
-
-	if (clear & TIOCM_RTS)
-		portdata->rts_state = 0;
-	if (clear & TIOCM_DTR)
-		portdata->dtr_state = 0;
-	return option_send_setup(port);
-}
-
-/* Write */
-static int option_write(struct tty_struct *tty, struct usb_serial_port *port,
-			const unsigned char *buf, int count)
-{
-	struct option_port_private *portdata;
-	struct option_intf_private *intfdata;
-	int i;
-	int left, todo;
-	struct urb *this_urb = NULL; /* spurious */
-	int err;
-	unsigned long flags;
-
-	portdata = usb_get_serial_port_data(port);
-	intfdata = port->serial->private;
-
-	dbg("%s: write (%d chars)", __func__, count);
-
-	i = 0;
-	left = count;
-	for (i = 0; left > 0 && i < N_OUT_URB; i++) {
-		todo = left;
-		if (todo > OUT_BUFLEN)
-			todo = OUT_BUFLEN;
-
-		this_urb = portdata->out_urbs[i];
-		if (test_and_set_bit(i, &portdata->out_busy)) {
-			if (time_before(jiffies,
-					portdata->tx_start_time[i] + 10 * HZ))
-				continue;
-			usb_unlink_urb(this_urb);
-			continue;
-		}
-		dbg("%s: endpoint %d buf %d", __func__,
-			usb_pipeendpoint(this_urb->pipe), i);
-
-		err = usb_autopm_get_interface_async(port->serial->interface);
-		if (err < 0)
-			break;
-
-		/* send the data */
-		memcpy(this_urb->transfer_buffer, buf, todo);
-		this_urb->transfer_buffer_length = todo;
-
-		spin_lock_irqsave(&intfdata->susp_lock, flags);
-		if (intfdata->suspended) {
-			usb_anchor_urb(this_urb, &portdata->delayed);
-			spin_unlock_irqrestore(&intfdata->susp_lock, flags);
-		} else {
-			intfdata->in_flight++;
-			spin_unlock_irqrestore(&intfdata->susp_lock, flags);
-			err = usb_submit_urb(this_urb, GFP_ATOMIC);
-			if (err) {
-				dbg("usb_submit_urb %p (write bulk) failed "
-					"(%d)", this_urb, err);
-				clear_bit(i, &portdata->out_busy);
-				spin_lock_irqsave(&intfdata->susp_lock, flags);
-				intfdata->in_flight--;
-				spin_unlock_irqrestore(&intfdata->susp_lock, flags);
-				continue;
-			}
-		}
-
-		portdata->tx_start_time[i] = jiffies;
-		buf += todo;
-		left -= todo;
-	}
-
-	count -= left;
-	dbg("%s: wrote (did %d)", __func__, count);
-	return count;
-}
-
-static void option_indat_callback(struct urb *urb)
-{
-	int err;
-	int endpoint;
-	struct usb_serial_port *port;
-	struct tty_struct *tty;
-	unsigned char *data = urb->transfer_buffer;
-	int status = urb->status;
-
-	dbg("%s: %p", __func__, urb);
-
-	endpoint = usb_pipeendpoint(urb->pipe);
-	port =  urb->context;
-
-	if (status) {
-		dbg("%s: nonzero status: %d on endpoint %02x.",
-		    __func__, status, endpoint);
-	} else {
-		tty = tty_port_tty_get(&port->port);
-		if (urb->actual_length) {
-			tty_insert_flip_string(tty, data, urb->actual_length);
-			tty_flip_buffer_push(tty);
-		} else 
-			dbg("%s: empty read urb received", __func__);
-		tty_kref_put(tty);
-
-		/* Resubmit urb so we continue receiving */
-		if (status != -ESHUTDOWN) {
-			err = usb_submit_urb(urb, GFP_ATOMIC);
-			if (err && err != -EPERM)
-				printk(KERN_ERR "%s: resubmit read urb failed. "
-					"(%d)", __func__, err);
-			else
-				usb_mark_last_busy(port->serial->dev);
-		}
-
-	}
-	return;
-}
-
-static void option_outdat_callback(struct urb *urb)
-{
-	struct usb_serial_port *port;
-	struct option_port_private *portdata;
-	struct option_intf_private *intfdata;
-	int i;
-
-	dbg("%s", __func__);
-
-	port =  urb->context;
-	intfdata = port->serial->private;
-
-	usb_serial_port_softint(port);
-	usb_autopm_put_interface_async(port->serial->interface);
-	portdata = usb_get_serial_port_data(port);
-	spin_lock(&intfdata->susp_lock);
-	intfdata->in_flight--;
-	spin_unlock(&intfdata->susp_lock);
-
-	for (i = 0; i < N_OUT_URB; ++i) {
-		if (portdata->out_urbs[i] == urb) {
-			smp_mb__before_clear_bit();
-			clear_bit(i, &portdata->out_busy);
-			break;
-		}
-	}
-}
-
 static void option_instat_callback(struct urb *urb)
 {
 	int err;
@@ -1121,183 +1096,6 @@ static void option_instat_callback(struct urb *urb)
 	}
 }
 
-static int option_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct option_port_private *portdata;
-	int i;
-	int data_len = 0;
-	struct urb *this_urb;
-
-	portdata = usb_get_serial_port_data(port);
-
-	for (i = 0; i < N_OUT_URB; i++) {
-		this_urb = portdata->out_urbs[i];
-		if (this_urb && !test_bit(i, &portdata->out_busy))
-			data_len += OUT_BUFLEN;
-	}
-
-	dbg("%s: %d", __func__, data_len);
-	return data_len;
-}
-
-static int option_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct option_port_private *portdata;
-	int i;
-	int data_len = 0;
-	struct urb *this_urb;
-
-	portdata = usb_get_serial_port_data(port);
-
-	for (i = 0; i < N_OUT_URB; i++) {
-		this_urb = portdata->out_urbs[i];
-		/* FIXME: This locking is insufficient as this_urb may
-		   go unused during the test */
-		if (this_urb && test_bit(i, &portdata->out_busy))
-			data_len += this_urb->transfer_buffer_length;
-	}
-	dbg("%s: %d", __func__, data_len);
-	return data_len;
-}
-
-static int option_open(struct tty_struct *tty, struct usb_serial_port *port)
-{
-	struct option_port_private *portdata;
-	struct option_intf_private *intfdata;
-	struct usb_serial *serial = port->serial;
-	int i, err;
-	struct urb *urb;
-
-	portdata = usb_get_serial_port_data(port);
-	intfdata = serial->private;
-
-	dbg("%s", __func__);
-
-	/* Start reading from the IN endpoint */
-	for (i = 0; i < N_IN_URB; i++) {
-		urb = portdata->in_urbs[i];
-		if (!urb)
-			continue;
-		err = usb_submit_urb(urb, GFP_KERNEL);
-		if (err) {
-			dbg("%s: submit urb %d failed (%d) %d",
-				__func__, i, err,
-				urb->transfer_buffer_length);
-		}
-	}
-
-	option_send_setup(port);
-
-	serial->interface->needs_remote_wakeup = 1;
-	spin_lock_irq(&intfdata->susp_lock);
-	portdata->opened = 1;
-	spin_unlock_irq(&intfdata->susp_lock);
-	usb_autopm_put_interface(serial->interface);
-
-	return 0;
-}
-
-static void option_dtr_rts(struct usb_serial_port *port, int on)
-{
-	struct usb_serial *serial = port->serial;
-	struct option_port_private *portdata;
-
-	dbg("%s", __func__);
-	portdata = usb_get_serial_port_data(port);
-	mutex_lock(&serial->disc_mutex);
-	portdata->rts_state = on;
-	portdata->dtr_state = on;
-	if (serial->dev)
-		option_send_setup(port);
-	mutex_unlock(&serial->disc_mutex);
-}
-
-
-static void option_close(struct usb_serial_port *port)
-{
-	int i;
-	struct usb_serial *serial = port->serial;
-	struct option_port_private *portdata;
-	struct option_intf_private *intfdata = port->serial->private;
-
-	dbg("%s", __func__);
-	portdata = usb_get_serial_port_data(port);
-
-	if (serial->dev) {
-		/* Stop reading/writing urbs */
-		spin_lock_irq(&intfdata->susp_lock);
-		portdata->opened = 0;
-		spin_unlock_irq(&intfdata->susp_lock);
-
-		for (i = 0; i < N_IN_URB; i++)
-			usb_kill_urb(portdata->in_urbs[i]);
-		for (i = 0; i < N_OUT_URB; i++)
-			usb_kill_urb(portdata->out_urbs[i]);
-		usb_autopm_get_interface(serial->interface);
-		serial->interface->needs_remote_wakeup = 0;
-	}
-}
-
-/* Helper functions used by option_setup_urbs */
-static struct urb *option_setup_urb(struct usb_serial *serial, int endpoint,
-		int dir, void *ctx, char *buf, int len,
-		void (*callback)(struct urb *))
-{
-	struct urb *urb;
-
-	if (endpoint == -1)
-		return NULL;		/* endpoint not needed */
-
-	urb = usb_alloc_urb(0, GFP_KERNEL);		/* No ISO */
-	if (urb == NULL) {
-		dbg("%s: alloc for endpoint %d failed.", __func__, endpoint);
-		return NULL;
-	}
-
-		/* Fill URB using supplied data. */
-	usb_fill_bulk_urb(urb, serial->dev,
-		      usb_sndbulkpipe(serial->dev, endpoint) | dir,
-		      buf, len, callback, ctx);
-
-	return urb;
-}
-
-/* Setup urbs */
-static void option_setup_urbs(struct usb_serial *serial)
-{
-	int i, j;
-	struct usb_serial_port *port;
-	struct option_port_private *portdata;
-
-	dbg("%s", __func__);
-
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		portdata = usb_get_serial_port_data(port);
-
-		/* Do indat endpoints first */
-		for (j = 0; j < N_IN_URB; ++j) {
-			portdata->in_urbs[j] = option_setup_urb(serial,
-					port->bulk_in_endpointAddress,
-					USB_DIR_IN, port,
-					portdata->in_buffer[j],
-					IN_BUFLEN, option_indat_callback);
-		}
-
-		/* outdat endpoints */
-		for (j = 0; j < N_OUT_URB; ++j) {
-			portdata->out_urbs[j] = option_setup_urb(serial,
-					port->bulk_out_endpointAddress,
-					USB_DIR_OUT, port,
-					portdata->out_buffer[j],
-					OUT_BUFLEN, option_outdat_callback);
-		}
-	}
-}
-
-
 /** send RTS/DTR state to the port.
  *
  * This is exactly the same as SET_CONTROL_LINE_STATE from the PSTN
@@ -1306,15 +1104,16 @@ static void option_setup_urbs(struct usb_serial *serial)
 static int option_send_setup(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
-	struct option_intf_private *intfdata =
-		(struct option_intf_private *) serial->private;
+	struct usb_wwan_intf_private *intfdata =
+		(struct usb_wwan_intf_private *) serial->private;
 	struct option_port_private *portdata;
 	int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
 	int val = 0;
 	dbg("%s", __func__);
 
-	if (is_blacklisted(ifNum, intfdata->blacklist_info) ==
-						OPTION_BLACKLIST_SENDSETUP) {
+	if (is_blacklisted(ifNum,
+			   (struct option_blacklist_info *) intfdata->private)
+	    == OPTION_BLACKLIST_SENDSETUP) {
 		dbg("No send_setup on blacklisted interface #%d\n", ifNum);
 		return -EIO;
 	}
@@ -1331,224 +1130,6 @@ static int option_send_setup(struct usb_serial_port *port)
 		0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT);
 }
 
-static int option_startup(struct usb_serial *serial)
-{
-	int i, j, err;
-	struct usb_serial_port *port;
-	struct option_port_private *portdata;
-	u8 *buffer;
-
-	dbg("%s", __func__);
-
-	/* Now setup per port private data */
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
-		if (!portdata) {
-			dbg("%s: kmalloc for option_port_private (%d) failed!.",
-					__func__, i);
-			return 1;
-		}
-		init_usb_anchor(&portdata->delayed);
-
-		for (j = 0; j < N_IN_URB; j++) {
-			buffer = (u8 *)__get_free_page(GFP_KERNEL);
-			if (!buffer)
-				goto bail_out_error;
-			portdata->in_buffer[j] = buffer;
-		}
-
-		for (j = 0; j < N_OUT_URB; j++) {
-			buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
-			if (!buffer)
-				goto bail_out_error2;
-			portdata->out_buffer[j] = buffer;
-		}
-
-		usb_set_serial_port_data(port, portdata);
-
-		if (!port->interrupt_in_urb)
-			continue;
-		err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
-		if (err)
-			dbg("%s: submit irq_in urb failed %d",
-				__func__, err);
-	}
-	option_setup_urbs(serial);
-	return 0;
-
-bail_out_error2:
-	for (j = 0; j < N_OUT_URB; j++)
-		kfree(portdata->out_buffer[j]);
-bail_out_error:
-	for (j = 0; j < N_IN_URB; j++)
-		if (portdata->in_buffer[j])
-			free_page((unsigned long)portdata->in_buffer[j]);
-	kfree(portdata);
-	return 1;
-}
-
-static void stop_read_write_urbs(struct usb_serial *serial)
-{
-	int i, j;
-	struct usb_serial_port *port;
-	struct option_port_private *portdata;
-
-	/* Stop reading/writing urbs */
-	for (i = 0; i < serial->num_ports; ++i) {
-		port = serial->port[i];
-		portdata = usb_get_serial_port_data(port);
-		for (j = 0; j < N_IN_URB; j++)
-			usb_kill_urb(portdata->in_urbs[j]);
-		for (j = 0; j < N_OUT_URB; j++)
-			usb_kill_urb(portdata->out_urbs[j]);
-	}
-}
-
-static void option_disconnect(struct usb_serial *serial)
-{
-	dbg("%s", __func__);
-
-	stop_read_write_urbs(serial);
-}
-
-static void option_release(struct usb_serial *serial)
-{
-	int i, j;
-	struct usb_serial_port *port;
-	struct option_port_private *portdata;
-
-	dbg("%s", __func__);
-
-	/* Now free them */
-	for (i = 0; i < serial->num_ports; ++i) {
-		port = serial->port[i];
-		portdata = usb_get_serial_port_data(port);
-
-		for (j = 0; j < N_IN_URB; j++) {
-			if (portdata->in_urbs[j]) {
-				usb_free_urb(portdata->in_urbs[j]);
-				free_page((unsigned long)
-					portdata->in_buffer[j]);
-				portdata->in_urbs[j] = NULL;
-			}
-		}
-		for (j = 0; j < N_OUT_URB; j++) {
-			if (portdata->out_urbs[j]) {
-				usb_free_urb(portdata->out_urbs[j]);
-				kfree(portdata->out_buffer[j]);
-				portdata->out_urbs[j] = NULL;
-			}
-		}
-	}
-
-	/* Now free per port private data */
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		kfree(usb_get_serial_port_data(port));
-	}
-}
-
-#ifdef CONFIG_PM
-static int option_suspend(struct usb_serial *serial, pm_message_t message)
-{
-	struct option_intf_private *intfdata = serial->private;
-	int b;
-
-	dbg("%s entered", __func__);
-
-	if (message.event & PM_EVENT_AUTO) {
-		spin_lock_irq(&intfdata->susp_lock);
-		b = intfdata->in_flight;
-		spin_unlock_irq(&intfdata->susp_lock);
-
-		if (b)
-			return -EBUSY;
-	}
-
-	spin_lock_irq(&intfdata->susp_lock);
-	intfdata->suspended = 1;
-	spin_unlock_irq(&intfdata->susp_lock);
-	stop_read_write_urbs(serial);
-
-	return 0;
-}
-
-static void play_delayed(struct usb_serial_port *port)
-{
-	struct option_intf_private *data;
-	struct option_port_private *portdata;
-	struct urb *urb;
-	int err;
-
-	portdata = usb_get_serial_port_data(port);
-	data = port->serial->private;
-	while ((urb = usb_get_from_anchor(&portdata->delayed))) {
-		err = usb_submit_urb(urb, GFP_ATOMIC);
-		if (!err)
-			data->in_flight++;
-	}
-}
-
-static int option_resume(struct usb_serial *serial)
-{
-	int i, j;
-	struct usb_serial_port *port;
-	struct option_intf_private *intfdata = serial->private;
-	struct option_port_private *portdata;
-	struct urb *urb;
-	int err = 0;
-
-	dbg("%s entered", __func__);
-	/* get the interrupt URBs resubmitted unconditionally */
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		if (!port->interrupt_in_urb) {
-			dbg("%s: No interrupt URB for port %d", __func__, i);
-			continue;
-		}
-		err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
-		dbg("Submitted interrupt URB for port %d (result %d)", i, err);
-		if (err < 0) {
-			err("%s: Error %d for interrupt URB of port%d",
-				 __func__, err, i);
-			goto err_out;
-		}
-	}
-
-	for (i = 0; i < serial->num_ports; i++) {
-		/* walk all ports */
-		port = serial->port[i];
-		portdata = usb_get_serial_port_data(port);
-
-		/* skip closed ports */
-		spin_lock_irq(&intfdata->susp_lock);
-		if (!portdata->opened) {
-			spin_unlock_irq(&intfdata->susp_lock);
-			continue;
-		}
-
-		for (j = 0; j < N_IN_URB; j++) {
-			urb = portdata->in_urbs[j];
-			err = usb_submit_urb(urb, GFP_ATOMIC);
-			if (err < 0) {
-				err("%s: Error %d for bulk URB %d",
-					 __func__, err, i);
-				spin_unlock_irq(&intfdata->susp_lock);
-				goto err_out;
-			}
-		}
-		play_delayed(port);
-		spin_unlock_irq(&intfdata->susp_lock);
-	}
-	spin_lock_irq(&intfdata->susp_lock);
-	intfdata->suspended = 0;
-	spin_unlock_irq(&intfdata->susp_lock);
-err_out:
-	return err;
-}
-#endif
-
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index deeacdea05d..e199b0f4f99 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -51,12 +51,13 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include <linux/uaccess.h>
+#include <linux/kfifo.h>
 #include "oti6858.h"
 
 #define OTI6858_DESCRIPTION \
 	"Ours Technology Inc. OTi-6858 USB to serial adapter driver"
 #define OTI6858_AUTHOR "Tomasz Michal Lukaszewski <FIXME@FIXME>"
-#define OTI6858_VERSION "0.1"
+#define OTI6858_VERSION "0.2"
 
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(OTI6858_VENDOR_ID, OTI6858_PRODUCT_ID) },
@@ -75,18 +76,6 @@ static struct usb_driver oti6858_driver = {
 
 static int debug;
 
-
-/* buffering code, copied from pl2303 driver */
-#define PL2303_BUF_SIZE		1024
-#define PL2303_TMP_BUF_SIZE	1024
-
-struct oti6858_buf {
-	unsigned int	buf_size;
-	char		*buf_buf;
-	char		*buf_get;
-	char		*buf_put;
-};
-
 /* requests */
 #define	OTI6858_REQ_GET_STATUS		(USB_DIR_IN | USB_TYPE_VENDOR | 0x00)
 #define	OTI6858_REQ_T_GET_STATUS	0x01
@@ -161,18 +150,6 @@ static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
 static int oti6858_startup(struct usb_serial *serial);
 static void oti6858_release(struct usb_serial *serial);
 
-/* functions operating on buffers */
-static struct oti6858_buf *oti6858_buf_alloc(unsigned int size);
-static void oti6858_buf_free(struct oti6858_buf *pb);
-static void oti6858_buf_clear(struct oti6858_buf *pb);
-static unsigned int oti6858_buf_data_avail(struct oti6858_buf *pb);
-static unsigned int oti6858_buf_space_avail(struct oti6858_buf *pb);
-static unsigned int oti6858_buf_put(struct oti6858_buf *pb, const char *buf,
-					unsigned int count);
-static unsigned int oti6858_buf_get(struct oti6858_buf *pb, char *buf,
-					unsigned int count);
-
-
 /* device info */
 static struct usb_serial_driver oti6858_device = {
 	.driver = {
@@ -201,7 +178,6 @@ static struct usb_serial_driver oti6858_device = {
 struct oti6858_private {
 	spinlock_t lock;
 
-	struct oti6858_buf *buf;
 	struct oti6858_control_pkt status;
 
 	struct {
@@ -295,7 +271,7 @@ static void setup_line(struct work_struct *work)
 	}
 }
 
-void send_data(struct work_struct *work)
+static void send_data(struct work_struct *work)
 {
 	struct oti6858_private *priv = container_of(work,
 			struct oti6858_private, delayed_write_work.work);
@@ -314,9 +290,12 @@ void send_data(struct work_struct *work)
 		return;
 	}
 	priv->flags.write_urb_in_use = 1;
-
-	count = oti6858_buf_data_avail(priv->buf);
 	spin_unlock_irqrestore(&priv->lock, flags);
+
+	spin_lock_irqsave(&port->lock, flags);
+	count = kfifo_len(&port->write_fifo);
+	spin_unlock_irqrestore(&port->lock, flags);
+
 	if (count > port->bulk_out_size)
 		count = port->bulk_out_size;
 
@@ -350,10 +329,9 @@ void send_data(struct work_struct *work)
 		return;
 	}
 
-	spin_lock_irqsave(&priv->lock, flags);
-	oti6858_buf_get(priv->buf, port->write_urb->transfer_buffer, count);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
+	count = kfifo_out_locked(&port->write_fifo,
+					port->write_urb->transfer_buffer,
+					count, &port->lock);
 	port->write_urb->transfer_buffer_length = count;
 	port->write_urb->dev = port->serial->dev;
 	result = usb_submit_urb(port->write_urb, GFP_NOIO);
@@ -376,11 +354,6 @@ static int oti6858_startup(struct usb_serial *serial)
 		priv = kzalloc(sizeof(struct oti6858_private), GFP_KERNEL);
 		if (!priv)
 			break;
-		priv->buf = oti6858_buf_alloc(PL2303_BUF_SIZE);
-		if (priv->buf == NULL) {
-			kfree(priv);
-			break;
-		}
 
 		spin_lock_init(&priv->lock);
 		init_waitqueue_head(&priv->intr_wait);
@@ -397,7 +370,6 @@ static int oti6858_startup(struct usb_serial *serial)
 
 	for (--i; i >= 0; --i) {
 		priv = usb_get_serial_port_data(serial->port[i]);
-		oti6858_buf_free(priv->buf);
 		kfree(priv);
 		usb_set_serial_port_data(serial->port[i], NULL);
 	}
@@ -407,17 +379,12 @@ static int oti6858_startup(struct usb_serial *serial)
 static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count)
 {
-	struct oti6858_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-
 	dbg("%s(port = %d, count = %d)", __func__, port->number, count);
 
 	if (!count)
 		return count;
 
-	spin_lock_irqsave(&priv->lock, flags);
-	count = oti6858_buf_put(priv->buf, buf, count);
-	spin_unlock_irqrestore(&priv->lock, flags);
+	count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock);
 
 	return count;
 }
@@ -425,15 +392,14 @@ static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
 static int oti6858_write_room(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	int room = 0;
 	unsigned long flags;
 
 	dbg("%s(port = %d)", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
-	room = oti6858_buf_space_avail(priv->buf);
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_lock_irqsave(&port->lock, flags);
+	room = kfifo_avail(&port->write_fifo);
+	spin_unlock_irqrestore(&port->lock, flags);
 
 	return room;
 }
@@ -441,15 +407,14 @@ static int oti6858_write_room(struct tty_struct *tty)
 static int oti6858_chars_in_buffer(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	int chars = 0;
 	unsigned long flags;
 
 	dbg("%s(port = %d)", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
-	chars = oti6858_buf_data_avail(priv->buf);
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_lock_irqsave(&port->lock, flags);
+	chars = kfifo_len(&port->write_fifo);
+	spin_unlock_irqrestore(&port->lock, flags);
 
 	return chars;
 }
@@ -640,10 +605,10 @@ static void oti6858_close(struct usb_serial_port *port)
 
 	dbg("%s(port = %d)", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&port->lock, flags);
 	/* clear out any remaining data in the buffer */
-	oti6858_buf_clear(priv->buf);
-	spin_unlock_irqrestore(&priv->lock, flags);
+	kfifo_reset_out(&port->write_fifo);
+	spin_unlock_irqrestore(&port->lock, flags);
 
 	dbg("%s(): after buf_clear()", __func__);
 
@@ -785,18 +750,12 @@ static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
 
 static void oti6858_release(struct usb_serial *serial)
 {
-	struct oti6858_private *priv;
 	int i;
 
 	dbg("%s()", __func__);
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		priv = usb_get_serial_port_data(serial->port[i]);
-		if (priv) {
-			oti6858_buf_free(priv->buf);
-			kfree(priv);
-		}
-	}
+	for (i = 0; i < serial->num_ports; ++i)
+		kfree(usb_get_serial_port_data(serial->port[i]));
 }
 
 static void oti6858_read_int_callback(struct urb *urb)
@@ -889,10 +848,14 @@ static void oti6858_read_int_callback(struct urb *urb)
 		}
 	} else if (!transient) {
 		unsigned long flags;
+		int count;
+
+		spin_lock_irqsave(&port->lock, flags);
+		count = kfifo_len(&port->write_fifo);
+		spin_unlock_irqrestore(&port->lock, flags);
 
 		spin_lock_irqsave(&priv->lock, flags);
-		if (priv->flags.write_urb_in_use == 0
-				&& oti6858_buf_data_avail(priv->buf) != 0) {
+		if (priv->flags.write_urb_in_use == 0 && count != 0) {
 			schedule_delayed_work(&priv->delayed_write_work, 0);
 			resubmit = 0;
 		}
@@ -1014,165 +977,6 @@ static void oti6858_write_bulk_callback(struct urb *urb)
 	}
 }
 
-
-/*
- * oti6858_buf_alloc
- *
- * Allocate a circular buffer and all associated memory.
- */
-static struct oti6858_buf *oti6858_buf_alloc(unsigned int size)
-{
-	struct oti6858_buf *pb;
-
-	if (size == 0)
-		return NULL;
-
-	pb = kmalloc(sizeof(struct oti6858_buf), GFP_KERNEL);
-	if (pb == NULL)
-		return NULL;
-
-	pb->buf_buf = kmalloc(size, GFP_KERNEL);
-	if (pb->buf_buf == NULL) {
-		kfree(pb);
-		return NULL;
-	}
-
-	pb->buf_size = size;
-	pb->buf_get = pb->buf_put = pb->buf_buf;
-
-	return pb;
-}
-
-/*
- * oti6858_buf_free
- *
- * Free the buffer and all associated memory.
- */
-static void oti6858_buf_free(struct oti6858_buf *pb)
-{
-	if (pb) {
-		kfree(pb->buf_buf);
-		kfree(pb);
-	}
-}
-
-/*
- * oti6858_buf_clear
- *
- * Clear out all data in the circular buffer.
- */
-static void oti6858_buf_clear(struct oti6858_buf *pb)
-{
-	if (pb != NULL) {
-		/* equivalent to a get of all data available */
-		pb->buf_get = pb->buf_put;
-	}
-}
-
-/*
- * oti6858_buf_data_avail
- *
- * Return the number of bytes of data available in the circular
- * buffer.
- */
-static unsigned int oti6858_buf_data_avail(struct oti6858_buf *pb)
-{
-	if (pb == NULL)
-		return 0;
-	return (pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size;
-}
-
-/*
- * oti6858_buf_space_avail
- *
- * Return the number of bytes of space available in the circular
- * buffer.
- */
-static unsigned int oti6858_buf_space_avail(struct oti6858_buf *pb)
-{
-	if (pb == NULL)
-		return 0;
-	return (pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size;
-}
-
-/*
- * oti6858_buf_put
- *
- * Copy data data from a user buffer and put it into the circular buffer.
- * Restrict to the amount of space available.
- *
- * Return the number of bytes copied.
- */
-static unsigned int oti6858_buf_put(struct oti6858_buf *pb, const char *buf,
-					unsigned int count)
-{
-	unsigned int len;
-
-	if (pb == NULL)
-		return 0;
-
-	len  = oti6858_buf_space_avail(pb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = pb->buf_buf + pb->buf_size - pb->buf_put;
-	if (count > len) {
-		memcpy(pb->buf_put, buf, len);
-		memcpy(pb->buf_buf, buf+len, count - len);
-		pb->buf_put = pb->buf_buf + count - len;
-	} else {
-		memcpy(pb->buf_put, buf, count);
-		if (count < len)
-			pb->buf_put += count;
-		else /* count == len */
-			pb->buf_put = pb->buf_buf;
-	}
-
-	return count;
-}
-
-/*
- * oti6858_buf_get
- *
- * Get data from the circular buffer and copy to the given buffer.
- * Restrict to the amount of data available.
- *
- * Return the number of bytes copied.
- */
-static unsigned int oti6858_buf_get(struct oti6858_buf *pb, char *buf,
-					unsigned int count)
-{
-	unsigned int len;
-
-	if (pb == NULL)
-		return 0;
-
-	len = oti6858_buf_data_avail(pb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = pb->buf_buf + pb->buf_size - pb->buf_get;
-	if (count > len) {
-		memcpy(buf, pb->buf_get, len);
-		memcpy(buf+len, pb->buf_buf, count - len);
-		pb->buf_get = pb->buf_buf + count - len;
-	} else {
-		memcpy(buf, pb->buf_get, count);
-		if (count < len)
-			pb->buf_get += count;
-		else /* count == len */
-			pb->buf_get = pb->buf_buf;
-	}
-
-	return count;
-}
-
 /* module description and (de)initialization */
 
 static int __init oti6858_init(void)
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 73d5f346d3e..6b600182227 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -40,16 +40,6 @@ static int debug;
 
 #define PL2303_CLOSING_WAIT	(30*HZ)
 
-#define PL2303_BUF_SIZE		1024
-#define PL2303_TMP_BUF_SIZE	1024
-
-struct pl2303_buf {
-	unsigned int	buf_size;
-	char		*buf_buf;
-	char		*buf_get;
-	char		*buf_put;
-};
-
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
@@ -59,6 +49,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
 	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
@@ -97,6 +88,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
 	{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
+	{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
@@ -155,173 +147,12 @@ enum pl2303_type {
 
 struct pl2303_private {
 	spinlock_t lock;
-	struct pl2303_buf *buf;
-	int write_urb_in_use;
 	wait_queue_head_t delta_msr_wait;
 	u8 line_control;
 	u8 line_status;
 	enum pl2303_type type;
 };
 
-/*
- * pl2303_buf_alloc
- *
- * Allocate a circular buffer and all associated memory.
- */
-static struct pl2303_buf *pl2303_buf_alloc(unsigned int size)
-{
-	struct pl2303_buf *pb;
-
-	if (size == 0)
-		return NULL;
-
-	pb = kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL);
-	if (pb == NULL)
-		return NULL;
-
-	pb->buf_buf = kmalloc(size, GFP_KERNEL);
-	if (pb->buf_buf == NULL) {
-		kfree(pb);
-		return NULL;
-	}
-
-	pb->buf_size = size;
-	pb->buf_get = pb->buf_put = pb->buf_buf;
-
-	return pb;
-}
-
-/*
- * pl2303_buf_free
- *
- * Free the buffer and all associated memory.
- */
-static void pl2303_buf_free(struct pl2303_buf *pb)
-{
-	if (pb) {
-		kfree(pb->buf_buf);
-		kfree(pb);
-	}
-}
-
-/*
- * pl2303_buf_clear
- *
- * Clear out all data in the circular buffer.
- */
-static void pl2303_buf_clear(struct pl2303_buf *pb)
-{
-	if (pb != NULL)
-		pb->buf_get = pb->buf_put;
-		/* equivalent to a get of all data available */
-}
-
-/*
- * pl2303_buf_data_avail
- *
- * Return the number of bytes of data available in the circular
- * buffer.
- */
-static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb)
-{
-	if (pb == NULL)
-		return 0;
-
-	return (pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size;
-}
-
-/*
- * pl2303_buf_space_avail
- *
- * Return the number of bytes of space available in the circular
- * buffer.
- */
-static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb)
-{
-	if (pb == NULL)
-		return 0;
-
-	return (pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size;
-}
-
-/*
- * pl2303_buf_put
- *
- * Copy data data from a user buffer and put it into the circular buffer.
- * Restrict to the amount of space available.
- *
- * Return the number of bytes copied.
- */
-static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf,
-				   unsigned int count)
-{
-	unsigned int len;
-
-	if (pb == NULL)
-		return 0;
-
-	len  = pl2303_buf_space_avail(pb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = pb->buf_buf + pb->buf_size - pb->buf_put;
-	if (count > len) {
-		memcpy(pb->buf_put, buf, len);
-		memcpy(pb->buf_buf, buf+len, count - len);
-		pb->buf_put = pb->buf_buf + count - len;
-	} else {
-		memcpy(pb->buf_put, buf, count);
-		if (count < len)
-			pb->buf_put += count;
-		else /* count == len */
-			pb->buf_put = pb->buf_buf;
-	}
-
-	return count;
-}
-
-/*
- * pl2303_buf_get
- *
- * Get data from the circular buffer and copy to the given buffer.
- * Restrict to the amount of data available.
- *
- * Return the number of bytes copied.
- */
-static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf,
-				   unsigned int count)
-{
-	unsigned int len;
-
-	if (pb == NULL)
-		return 0;
-
-	len = pl2303_buf_data_avail(pb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = pb->buf_buf + pb->buf_size - pb->buf_get;
-	if (count > len) {
-		memcpy(buf, pb->buf_get, len);
-		memcpy(buf+len, pb->buf_buf, count - len);
-		pb->buf_get = pb->buf_buf + count - len;
-	} else {
-		memcpy(buf, pb->buf_get, count);
-		if (count < len)
-			pb->buf_get += count;
-		else /* count == len */
-			pb->buf_get = pb->buf_buf;
-	}
-
-	return count;
-}
-
 static int pl2303_vendor_read(__u16 value, __u16 index,
 		struct usb_serial *serial, unsigned char *buf)
 {
@@ -370,11 +201,6 @@ static int pl2303_startup(struct usb_serial *serial)
 		if (!priv)
 			goto cleanup;
 		spin_lock_init(&priv->lock);
-		priv->buf = pl2303_buf_alloc(PL2303_BUF_SIZE);
-		if (priv->buf == NULL) {
-			kfree(priv);
-			goto cleanup;
-		}
 		init_waitqueue_head(&priv->delta_msr_wait);
 		priv->type = type;
 		usb_set_serial_port_data(serial->port[i], priv);
@@ -402,7 +228,6 @@ cleanup:
 	kfree(buf);
 	for (--i; i >= 0; --i) {
 		priv = usb_get_serial_port_data(serial->port[i]);
-		pl2303_buf_free(priv->buf);
 		kfree(priv);
 		usb_set_serial_port_data(serial->port[i], NULL);
 	}
@@ -420,102 +245,6 @@ static int set_control_lines(struct usb_device *dev, u8 value)
 	return retval;
 }
 
-static void pl2303_send(struct usb_serial_port *port)
-{
-	int count, result;
-	struct pl2303_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	if (priv->write_urb_in_use) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return;
-	}
-
-	count = pl2303_buf_get(priv->buf, port->write_urb->transfer_buffer,
-			       port->bulk_out_size);
-
-	if (count == 0) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return;
-	}
-
-	priv->write_urb_in_use = 1;
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	usb_serial_debug_data(debug, &port->dev, __func__, count,
-			      port->write_urb->transfer_buffer);
-
-	port->write_urb->transfer_buffer_length = count;
-	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-	if (result) {
-		dev_err(&port->dev, "%s - failed submitting write urb,"
-			" error %d\n", __func__, result);
-		priv->write_urb_in_use = 0;
-		/* TODO: reschedule pl2303_send */
-	}
-
-	usb_serial_port_softint(port);
-}
-
-static int pl2303_write(struct tty_struct *tty, struct usb_serial_port *port,
-				const unsigned char *buf, int count)
-{
-	struct pl2303_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-
-	dbg("%s - port %d, %d bytes", __func__, port->number, count);
-
-	if (!count)
-		return count;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	count = pl2303_buf_put(priv->buf, buf, count);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	pl2303_send(port);
-
-	return count;
-}
-
-static int pl2303_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct pl2303_private *priv = usb_get_serial_port_data(port);
-	int room = 0;
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	room = pl2303_buf_space_avail(priv->buf);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	dbg("%s - returns %d", __func__, room);
-	return room;
-}
-
-static int pl2303_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct pl2303_private *priv = usb_get_serial_port_data(port);
-	int chars = 0;
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	chars = pl2303_buf_data_avail(priv->buf);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	dbg("%s - returns %d", __func__, chars);
-	return chars;
-}
-
 static void pl2303_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
@@ -727,22 +456,10 @@ static void pl2303_dtr_rts(struct usb_serial_port *port, int on)
 
 static void pl2303_close(struct usb_serial_port *port)
 {
-	struct pl2303_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
-	/* clear out any remaining data in the buffer */
-	pl2303_buf_clear(priv->buf);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	/* shutdown our urbs */
-	dbg("%s - shutting down urbs", __func__);
-	usb_kill_urb(port->write_urb);
-	usb_kill_urb(port->read_urb);
+	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
-
 }
 
 static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -768,10 +485,8 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 		pl2303_set_termios(tty, port, &tmp_termios);
 
 	dbg("%s - submitting read urb", __func__);
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
+	result = usb_serial_generic_submit_read_urb(port, GFP_KERNEL);
 	if (result) {
-		dev_err(&port->dev, "%s - failed submitting read urb,"
-			" error %d\n", __func__, result);
 		pl2303_close(port);
 		return -EPROTO;
 	}
@@ -951,10 +666,7 @@ static void pl2303_release(struct usb_serial *serial)
 
 	for (i = 0; i < serial->num_ports; ++i) {
 		priv = usb_get_serial_port_data(serial->port[i]);
-		if (priv) {
-			pl2303_buf_free(priv->buf);
-			kfree(priv);
-		}
+		kfree(priv);
 	}
 }
 
@@ -1035,13 +747,31 @@ exit:
 			__func__, retval);
 }
 
-static void pl2303_push_data(struct tty_struct *tty,
-		struct usb_serial_port *port, struct urb *urb,
-		u8 line_status)
+static void pl2303_process_read_urb(struct urb *urb)
 {
+	struct usb_serial_port *port = urb->context;
+	struct pl2303_private *priv = usb_get_serial_port_data(port);
+	struct tty_struct *tty;
 	unsigned char *data = urb->transfer_buffer;
-	/* get tty_flag from status */
 	char tty_flag = TTY_NORMAL;
+	unsigned long flags;
+	u8 line_status;
+	int i;
+
+	/* update line status */
+	spin_lock_irqsave(&priv->lock, flags);
+	line_status = priv->line_status;
+	priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	wake_up_interruptible(&priv->delta_msr_wait);
+
+	if (!urb->actual_length)
+		return;
+
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
+		return;
+
 	/* break takes precedence over parity, */
 	/* which takes precedence over framing errors */
 	if (line_status & UART_BREAK_ERROR)
@@ -1056,107 +786,17 @@ static void pl2303_push_data(struct tty_struct *tty,
 	if (line_status & UART_OVERRUN_ERROR)
 		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
 
-	if (tty_flag == TTY_NORMAL && !(port->console && port->sysrq))
-		tty_insert_flip_string(tty, data, urb->actual_length);
-	else {
-		int i;
+	if (port->port.console && port->sysrq) {
 		for (i = 0; i < urb->actual_length; ++i)
 			if (!usb_serial_handle_sysrq_char(tty, port, data[i]))
 				tty_insert_flip_char(tty, data[i], tty_flag);
+	} else {
+		tty_insert_flip_string_fixed_flag(tty, data, tty_flag,
+							urb->actual_length);
 	}
-	tty_flip_buffer_push(tty);
-}
-
-static void pl2303_read_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port =  urb->context;
-	struct pl2303_private *priv = usb_get_serial_port_data(port);
-	struct tty_struct *tty;
-	unsigned long flags;
-	int result;
-	int status = urb->status;
-	u8 line_status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status) {
-		dbg("%s - urb status = %d", __func__, status);
-		if (status == -EPROTO) {
-			/* PL2303 mysteriously fails with -EPROTO reschedule
-			 * the read */
-			dbg("%s - caught -EPROTO, resubmitting the urb",
-			    __func__);
-			result = usb_submit_urb(urb, GFP_ATOMIC);
-			if (result)
-				dev_err(&urb->dev->dev, "%s - failed"
-					" resubmitting read urb, error %d\n",
-					__func__, result);
-			return;
-		}
-		dbg("%s - unable to handle the error, exiting.", __func__);
-		return;
-	}
-
-	usb_serial_debug_data(debug, &port->dev, __func__,
-			      urb->actual_length, urb->transfer_buffer);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	line_status = priv->line_status;
-	priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
-	spin_unlock_irqrestore(&priv->lock, flags);
-	wake_up_interruptible(&priv->delta_msr_wait);
 
-	tty = tty_port_tty_get(&port->port);
-	if (tty && urb->actual_length) {
-		pl2303_push_data(tty, port, urb, line_status);
-	}
+	tty_flip_buffer_push(tty);
 	tty_kref_put(tty);
-	/* Schedule the next read _if_ we are still open */
-	result = usb_submit_urb(urb, GFP_ATOMIC);
-	if (result && result != -EPERM)
-		dev_err(&urb->dev->dev, "%s - failed resubmitting"
-			" read urb, error %d\n", __func__, result);
-}
-
-static void pl2303_write_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port =  urb->context;
-	struct pl2303_private *priv = usb_get_serial_port_data(port);
-	int result;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	switch (status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__,
-		    status);
-		priv->write_urb_in_use = 0;
-		return;
-	default:
-		/* error in the urb, so we have to resubmit it */
-		dbg("%s - Overflow in write", __func__);
-		dbg("%s - nonzero write bulk status received: %d", __func__,
-		    status);
-		port->write_urb->transfer_buffer_length = 1;
-		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-		if (result)
-			dev_err(&urb->dev->dev, "%s - failed resubmitting write"
-				" urb, error %d\n", __func__, result);
-		else
-			return;
-	}
-
-	priv->write_urb_in_use = 0;
-
-	/* send any buffered data */
-	pl2303_send(port);
 }
 
 /* All of the device info needed for the PL2303 SIO serial converter */
@@ -1168,21 +808,19 @@ static struct usb_serial_driver pl2303_device = {
 	.id_table =		id_table,
 	.usb_driver = 		&pl2303_driver,
 	.num_ports =		1,
+	.bulk_in_size =		256,
+	.bulk_out_size =	256,
 	.open =			pl2303_open,
 	.close =		pl2303_close,
 	.dtr_rts = 		pl2303_dtr_rts,
 	.carrier_raised =	pl2303_carrier_raised,
-	.write =		pl2303_write,
 	.ioctl =		pl2303_ioctl,
 	.break_ctl =		pl2303_break_ctl,
 	.set_termios =		pl2303_set_termios,
 	.tiocmget =		pl2303_tiocmget,
 	.tiocmset =		pl2303_tiocmset,
-	.read_bulk_callback =	pl2303_read_bulk_callback,
+	.process_read_urb =	pl2303_process_read_urb,
 	.read_int_callback =	pl2303_read_int_callback,
-	.write_bulk_callback =	pl2303_write_bulk_callback,
-	.write_room =		pl2303_write_room,
-	.chars_in_buffer =	pl2303_chars_in_buffer,
 	.attach =		pl2303_startup,
 	.release =		pl2303_release,
 };
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index d640dc95156..a871645389d 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -5,7 +5,7 @@
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
- * 
+ *
  */
 
 #define BENQ_VENDOR_ID			0x04a5
@@ -20,6 +20,7 @@
 #define PL2303_PRODUCT_ID_ALDIGA	0x0611
 #define PL2303_PRODUCT_ID_MMX		0x0612
 #define PL2303_PRODUCT_ID_GPRS		0x0609
+#define PL2303_PRODUCT_ID_HCR331	0x331a
 
 #define ATEN_VENDOR_ID		0x0557
 #define ATEN_VENDOR_ID2		0x0547
@@ -134,3 +135,7 @@
 /* Sanwa KB-USB2 multimeter cable (ID: 11ad:0001) */
 #define SANWA_VENDOR_ID		0x11ad
 #define SANWA_PRODUCT_ID	0x0001
+
+/* ADLINK ND-6530 RS232,RS485 and RS422 adapter */
+#define ADLINK_VENDOR_ID		0x0b63
+#define ADLINK_ND6530_PRODUCT_ID	0x6530
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
index 0b936206171..214a3e50429 100644
--- a/drivers/usb/serial/qcaux.c
+++ b/drivers/usb/serial/qcaux.c
@@ -42,6 +42,18 @@
 #define CMOTECH_PRODUCT_CDU550			0x5553
 #define CMOTECH_PRODUCT_CDX650			0x6512
 
+/* LG devices */
+#define LG_VENDOR_ID				0x1004
+#define LG_PRODUCT_VX4400_6000			0x6000 /* VX4400/VX6000/Rumor */
+
+/* Sanyo devices */
+#define SANYO_VENDOR_ID				0x0474
+#define SANYO_PRODUCT_KATANA_LX			0x0754 /* SCP-3800 (Katana LX) */
+
+/* Samsung devices */
+#define SAMSUNG_VENDOR_ID			0x04e8
+#define SAMSUNG_PRODUCT_U520			0x6640 /* SCH-U520 */
+
 static struct usb_device_id id_table[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5740, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5750, 0xff, 0x00, 0x00) },
@@ -51,6 +63,9 @@ static struct usb_device_id id_table[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_ALLTEL, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU550, 0xff, 0xff, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDX650, 0xff, 0xff, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 53a2d5a935a..04bb759536b 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -15,6 +15,8 @@
 #include <linux/tty_flip.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
+#include <linux/slab.h>
+#include "usb-wwan.h"
 
 #define DRIVER_AUTHOR "Qualcomm Inc"
 #define DRIVER_DESC "Qualcomm USB Serial driver"
@@ -76,6 +78,8 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x1199, 0x900a)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
 	{USB_DEVICE(0x16d8, 0x8001)},	/* CMDTech Gobi 2000 QDL device (VU922) */
 	{USB_DEVICE(0x16d8, 0x8002)},	/* CMDTech Gobi 2000 Modem device (VU922) */
+	{USB_DEVICE(0x05c6, 0x9204)},	/* Gobi 2000 QDL device */
+	{USB_DEVICE(0x05c6, 0x9205)},	/* Gobi 2000 Modem device */
 	{ }				/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, id_table);
@@ -92,6 +96,8 @@ static struct usb_driver qcdriver = {
 
 static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 {
+	struct usb_wwan_intf_private *data;
+	struct usb_host_interface *intf = serial->interface->cur_altsetting;
 	int retval = -ENODEV;
 	__u8 nintf;
 	__u8 ifnum;
@@ -100,33 +106,45 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 
 	nintf = serial->dev->actconfig->desc.bNumInterfaces;
 	dbg("Num Interfaces = %d", nintf);
-	ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+	ifnum = intf->desc.bInterfaceNumber;
 	dbg("This Interface = %d", ifnum);
 
+	data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private),
+					 GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	spin_lock_init(&data->susp_lock);
+
 	switch (nintf) {
 	case 1:
 		/* QDL mode */
-		if (serial->interface->num_altsetting == 2) {
-			struct usb_host_interface *intf;
-
+		/* Gobi 2000 has a single altsetting, older ones have two */
+		if (serial->interface->num_altsetting == 2)
 			intf = &serial->interface->altsetting[1];
-			if (intf->desc.bNumEndpoints == 2) {
-				if (usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
-				    usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
-					dbg("QDL port found");
-					retval = usb_set_interface(serial->dev, ifnum, 1);
-					if (retval < 0) {
-						dev_err(&serial->dev->dev,
-							"Could not set interface, error %d\n",
-							retval);
-						retval = -ENODEV;
-					}
-					return retval;
-				}
+		else if (serial->interface->num_altsetting > 2)
+			break;
+
+		if (intf->desc.bNumEndpoints == 2 &&
+		    usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
+		    usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
+			dbg("QDL port found");
+
+			if (serial->interface->num_altsetting == 1)
+				return 0;
+
+			retval = usb_set_interface(serial->dev, ifnum, 1);
+			if (retval < 0) {
+				dev_err(&serial->dev->dev,
+					"Could not set interface, error %d\n",
+					retval);
+				retval = -ENODEV;
 			}
+			return retval;
 		}
 		break;
 
+	case 3:
 	case 4:
 		/* Composite mode */
 		if (ifnum == 2) {
@@ -161,6 +179,18 @@ static struct usb_serial_driver qcdevice = {
 	.usb_driver          = &qcdriver,
 	.num_ports           = 1,
 	.probe               = qcprobe,
+	.open		     = usb_wwan_open,
+	.close		     = usb_wwan_close,
+	.write		     = usb_wwan_write,
+	.write_room	     = usb_wwan_write_room,
+	.chars_in_buffer     = usb_wwan_chars_in_buffer,
+	.attach		     = usb_wwan_startup,
+	.disconnect	     = usb_wwan_disconnect,
+	.release	     = usb_wwan_release,
+#ifdef CONFIG_PM
+	.suspend	     = usb_wwan_suspend,
+	.resume		     = usb_wwan_resume,
+#endif
 };
 
 static int __init qcinit(void)
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index 43a0cadd578..a36e2313eed 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -1,6 +1,7 @@
 /*
  * Safe Encapsulated USB Serial Driver
  *
+ *      Copyright (C) 2010 Johan Hovold <jhovold@gmail.com>
  *      Copyright (C) 2001 Lineo
  *      Copyright (C) 2001 Hewlett-Packard
  *
@@ -84,8 +85,8 @@ static int debug;
 static int safe = 1;
 static int padded = CONFIG_USB_SERIAL_SAFE_PADDED;
 
-#define DRIVER_VERSION "v0.0b"
-#define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com"
+#define DRIVER_VERSION "v0.1"
+#define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com, Johan Hovold <jhovold@gmail.com>"
 #define DRIVER_DESC "USB Safe Encapsulated Serial"
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
@@ -212,191 +213,80 @@ static __u16 __inline__ fcs_compute10(unsigned char *sp, int len, __u16 fcs)
 	return fcs;
 }
 
-static void safe_read_bulk_callback(struct urb *urb)
+static void safe_process_read_urb(struct urb *urb)
 {
-	struct usb_serial_port *port =  urb->context;
+	struct usb_serial_port *port = urb->context;
 	unsigned char *data = urb->transfer_buffer;
 	unsigned char length = urb->actual_length;
+	int actual_length;
 	struct tty_struct *tty;
-	int result;
-	int status = urb->status;
+	__u16 fcs;
 
-	dbg("%s", __func__);
-
-	if (status) {
-		dbg("%s - nonzero read bulk status received: %d",
-		    __func__, status);
+	if (!length)
 		return;
-	}
 
-	dbg("safe_read_bulk_callback length: %d",
-					port->read_urb->actual_length);
-#ifdef ECHO_RCV
-	{
-		int i;
-		unsigned char *cp = port->read_urb->transfer_buffer;
-		for (i = 0; i < port->read_urb->actual_length; i++) {
-			if ((i % 32) == 0)
-				printk("\nru[%02x] ", i);
-			printk("%02x ", *cp++);
-		}
-		printk("\n");
-	}
-#endif
 	tty = tty_port_tty_get(&port->port);
-	if (safe) {
-		__u16 fcs;
-		fcs = fcs_compute10(data, length, CRC10_INITFCS);
-		if (!fcs) {
-			int actual_length = data[length - 2] >> 2;
-			if (actual_length <= (length - 2)) {
-				dev_info(&urb->dev->dev, "%s - actual: %d\n",
-					 __func__, actual_length);
-				tty_insert_flip_string(tty,
-							data, actual_length);
-				tty_flip_buffer_push(tty);
-			} else {
-				dev_err(&port->dev,
-					"%s - inconsistent lengths %d:%d\n",
-					__func__, actual_length, length);
-			}
-		} else {
-			dev_err(&port->dev, "%s - bad CRC %x\n", __func__, fcs);
-		}
-	} else {
-		tty_insert_flip_string(tty, data, length);
-		tty_flip_buffer_push(tty);
-	}
-	tty_kref_put(tty);
-
-	/* Continue trying to always read  */
-	usb_fill_bulk_urb(urb, port->serial->dev,
-			usb_rcvbulkpipe(port->serial->dev,
-					port->bulk_in_endpointAddress),
-			urb->transfer_buffer, urb->transfer_buffer_length,
-			safe_read_bulk_callback, port);
-
-	result = usb_submit_urb(urb, GFP_ATOMIC);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed resubmitting read urb, error %d\n",
-			__func__, result);
-		/* FIXME: Need a mechanism to retry later if this happens */
-}
-
-static int safe_write(struct tty_struct *tty, struct usb_serial_port *port,
-					const unsigned char *buf, int count)
-{
-	unsigned char *data;
-	int result;
-	int i;
-	int packet_length;
-
-	dbg("safe_write port: %p %d urb: %p count: %d",
-				port, port->number, port->write_urb, count);
-
-	if (!port->write_urb) {
-		dbg("%s - write urb NULL", __func__);
-		return 0;
-	}
-
-	dbg("safe_write write_urb: %d transfer_buffer_length",
-	     port->write_urb->transfer_buffer_length);
-
-	if (!port->write_urb->transfer_buffer_length) {
-		dbg("%s - write urb transfer_buffer_length zero", __func__);
-		return 0;
-	}
-	if (count == 0) {
-		dbg("%s - write request of 0 bytes", __func__);
-		return 0;
-	}
-	spin_lock_bh(&port->lock);
-	if (port->write_urb_busy) {
-		spin_unlock_bh(&port->lock);
-		dbg("%s - already writing", __func__);
-		return 0;
-	}
-	port->write_urb_busy = 1;
-	spin_unlock_bh(&port->lock);
-
-	packet_length = port->bulk_out_size;	/* get max packetsize */
-
-	i = packet_length - (safe ? 2 : 0);	/* get bytes to send */
-	count = (count > i) ? i : count;
-
-
-	/* get the data into the transfer buffer */
-	data = port->write_urb->transfer_buffer;
-	memset(data, '0', packet_length);
-
-	memcpy(data, buf, count);
-
-	if (safe) {
-		__u16 fcs;
-
-		/* pad if necessary */
-		if (!padded)
-			packet_length = count + 2;
-		/* set count */
-		data[packet_length - 2] = count << 2;
-		data[packet_length - 1] = 0;
+	if (!tty)
+		return;
 
-		/* compute fcs and insert into trailer */
-		fcs = fcs_compute10(data, packet_length, CRC10_INITFCS);
-		data[packet_length - 2] |= fcs >> 8;
-		data[packet_length - 1] |= fcs & 0xff;
+	if (!safe)
+		goto out;
 
-		/* set length to send */
-		port->write_urb->transfer_buffer_length = packet_length;
-	} else {
-		port->write_urb->transfer_buffer_length = count;
+	fcs = fcs_compute10(data, length, CRC10_INITFCS);
+	if (fcs) {
+		dev_err(&port->dev, "%s - bad CRC %x\n", __func__, fcs);
+		goto err;
 	}
 
-	usb_serial_debug_data(debug, &port->dev, __func__, count,
-					port->write_urb->transfer_buffer);
-#ifdef ECHO_TX
-	{
-		int i;
-		unsigned char *cp = port->write_urb->transfer_buffer;
-		for (i = 0; i < port->write_urb->transfer_buffer_length; i++) {
-			if ((i % 32) == 0)
-				printk("\nsu[%02x] ", i);
-			printk("%02x ", *cp++);
-		}
-		printk("\n");
-	}
-#endif
-	port->write_urb->dev = port->serial->dev;
-	result = usb_submit_urb(port->write_urb, GFP_KERNEL);
-	if (result) {
-		port->write_urb_busy = 0;
-		dev_err(&port->dev,
-			"%s - failed submitting write urb, error %d\n",
-			__func__, result);
-		return 0;
+	actual_length = data[length - 2] >> 2;
+	if (actual_length > (length - 2)) {
+		dev_err(&port->dev, "%s - inconsistent lengths %d:%d\n",
+				__func__, actual_length, length);
+		goto err;
 	}
-	dbg("%s urb: %p submitted", __func__, port->write_urb);
-
-	return count;
+	dev_info(&urb->dev->dev, "%s - actual: %d\n", __func__, actual_length);
+	length = actual_length;
+out:
+	tty_insert_flip_string(tty, data, length);
+	tty_flip_buffer_push(tty);
+err:
+	tty_kref_put(tty);
 }
 
-static int safe_write_room(struct tty_struct *tty)
+static int safe_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size)
 {
-	struct usb_serial_port *port = tty->driver_data;
-	int room = 0;		/* Default: no room */
-	unsigned long flags;
+	unsigned char *buf = dest;
+	int count;
+	int trailer_len;
+	int pkt_len;
+	__u16 fcs;
+
+	trailer_len = safe ? 2 : 0;
+
+	count = kfifo_out_locked(&port->write_fifo, buf, size - trailer_len,
+								&port->lock);
+	if (!safe)
+		return count;
+
+	/* pad if necessary */
+	if (padded) {
+		pkt_len = size;
+		memset(buf + count, '0', pkt_len - count - trailer_len);
+	} else {
+		pkt_len = count + trailer_len;
+	}
 
-	dbg("%s", __func__);
+	/* set count */
+	buf[pkt_len - 2] = count << 2;
+	buf[pkt_len - 1] = 0;
 
-	spin_lock_irqsave(&port->lock, flags);
-	if (port->write_urb_busy)
-		room = port->bulk_out_size - (safe ? 2 : 0);
-	spin_unlock_irqrestore(&port->lock, flags);
+	/* compute fcs and insert into trailer */
+	fcs = fcs_compute10(buf, pkt_len, CRC10_INITFCS);
+	buf[pkt_len - 2] |= fcs >> 8;
+	buf[pkt_len - 1] |= fcs & 0xff;
 
-	if (room)
-		dbg("safe_write_room returns %d", room);
-	return room;
+	return pkt_len;
 }
 
 static int safe_startup(struct usb_serial *serial)
@@ -421,9 +311,8 @@ static struct usb_serial_driver safe_device = {
 	.id_table =		id_table,
 	.usb_driver =		&safe_driver,
 	.num_ports =		1,
-	.write =		safe_write,
-	.write_room =		safe_write_room,
-	.read_bulk_callback =	safe_read_bulk_callback,
+	.process_read_urb =	safe_process_read_urb,
+	.prepare_write_buffer =	safe_prepare_write_buffer,
 	.attach =		safe_startup,
 };
 
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 9202f94505e..ef0bdb08d78 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -230,6 +230,7 @@ static const struct sierra_iface_info direct_ip_interface_blacklist = {
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
 	{ USB_DEVICE(0x03F0, 0x1B1D) },	/* HP ev2200 a.k.a MC5720 */
+	{ USB_DEVICE(0x03F0, 0x211D) }, /* HP ev2210 a.k.a MC5725 */
 	{ USB_DEVICE(0x03F0, 0x1E1D) },	/* HP hs2300 a.k.a MC8775 */
 
 	{ USB_DEVICE(0x1199, 0x0017) },	/* Sierra Wireless EM5625 */
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 5d39191e724..329d311a35d 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -1,6 +1,7 @@
 /*
  * spcp8x5 USB to serial adaptor driver
  *
+ * Copyright (C) 2010 Johan Hovold (jhovold@gmail.com)
  * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn)
  * Copyright (C) 2006 S1 Corp.
  *
@@ -29,7 +30,7 @@
 
 
 /* Version Information */
-#define DRIVER_VERSION 	"v0.04"
+#define DRIVER_VERSION	"v0.10"
 #define DRIVER_DESC 	"SPCP8x5 USB to serial adaptor driver"
 
 static int debug;
@@ -64,11 +65,6 @@ struct spcp8x5_usb_ctrl_arg {
 	u16	length;
 };
 
-/* wait 30s before close */
-#define SPCP8x5_CLOSING_WAIT	(30*HZ)
-
-#define SPCP8x5_BUF_SIZE	1024
-
 
 /* spcp8x5 spec register define */
 #define MCR_CONTROL_LINE_RTS		0x02
@@ -155,133 +151,6 @@ enum spcp8x5_type {
 	SPCP835_TYPE,
 };
 
-/* 1st in 1st out buffer 4 driver */
-struct ringbuf {
-	unsigned int	buf_size;
-	char		*buf_buf;
-	char		*buf_get;
-	char		*buf_put;
-};
-
-/* alloc the ring buf and alloc the buffer itself */
-static inline struct ringbuf *alloc_ringbuf(unsigned int size)
-{
-	struct ringbuf *pb;
-
-	if (size == 0)
-		return NULL;
-
-	pb = kmalloc(sizeof(*pb), GFP_KERNEL);
-	if (pb == NULL)
-		return NULL;
-
-	pb->buf_buf = kmalloc(size, GFP_KERNEL);
-	if (pb->buf_buf == NULL) {
-		kfree(pb);
-		return NULL;
-	}
-
-	pb->buf_size = size;
-	pb->buf_get = pb->buf_put = pb->buf_buf;
-
-	return pb;
-}
-
-/* free the ring buf and the buffer itself */
-static inline void free_ringbuf(struct ringbuf *pb)
-{
-	if (pb != NULL) {
-		kfree(pb->buf_buf);
-		kfree(pb);
-	}
-}
-
-/* clear pipo , juest repoint the pointer here */
-static inline void clear_ringbuf(struct ringbuf *pb)
-{
-	if (pb != NULL)
-		pb->buf_get = pb->buf_put;
-}
-
-/* get the number of data in the pipo */
-static inline unsigned int ringbuf_avail_data(struct ringbuf *pb)
-{
-	if (pb == NULL)
-		return 0;
-	return (pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size;
-}
-
-/* get the number of space in the pipo */
-static inline unsigned int ringbuf_avail_space(struct ringbuf *pb)
-{
-	if (pb == NULL)
-		return 0;
-	return (pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size;
-}
-
-/* put count data into pipo */
-static unsigned int put_ringbuf(struct ringbuf *pb, const char *buf,
-				unsigned int count)
-{
-	unsigned int len;
-
-	if (pb == NULL)
-		return 0;
-
-	len  = ringbuf_avail_space(pb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = pb->buf_buf + pb->buf_size - pb->buf_put;
-	if (count > len) {
-		memcpy(pb->buf_put, buf, len);
-		memcpy(pb->buf_buf, buf+len, count - len);
-		pb->buf_put = pb->buf_buf + count - len;
-	} else {
-		memcpy(pb->buf_put, buf, count);
-		if (count < len)
-			pb->buf_put += count;
-		else /* count == len */
-			pb->buf_put = pb->buf_buf;
-	}
-	return count;
-}
-
-/* get count data from pipo */
-static unsigned int get_ringbuf(struct ringbuf *pb, char *buf,
-				unsigned int count)
-{
-	unsigned int len;
-
-	if (pb == NULL || buf == NULL)
-		return 0;
-
-	len = ringbuf_avail_data(pb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = pb->buf_buf + pb->buf_size - pb->buf_get;
-	if (count > len) {
-		memcpy(buf, pb->buf_get, len);
-		memcpy(buf+len, pb->buf_buf, count - len);
-		pb->buf_get = pb->buf_buf + count - len;
-	} else {
-		memcpy(buf, pb->buf_get, count);
-		if (count < len)
-			pb->buf_get += count;
-		else /* count == len */
-			pb->buf_get = pb->buf_buf;
-	}
-
-	return count;
-}
-
 static struct usb_driver spcp8x5_driver = {
 	.name =			"spcp8x5",
 	.probe =		usb_serial_probe,
@@ -293,8 +162,6 @@ static struct usb_driver spcp8x5_driver = {
 
 struct spcp8x5_private {
 	spinlock_t 	lock;
-	struct ringbuf	*buf;
-	int 		write_urb_in_use;
 	enum spcp8x5_type	type;
 	wait_queue_head_t	delta_msr_wait;
 	u8 			line_control;
@@ -330,24 +197,15 @@ static int spcp8x5_startup(struct usb_serial *serial)
 			goto cleanup;
 
 		spin_lock_init(&priv->lock);
-		priv->buf = alloc_ringbuf(SPCP8x5_BUF_SIZE);
-		if (priv->buf == NULL)
-			goto cleanup2;
-
 		init_waitqueue_head(&priv->delta_msr_wait);
 		priv->type = type;
 		usb_set_serial_port_data(serial->port[i] , priv);
-
 	}
 
 	return 0;
-
-cleanup2:
-	kfree(priv);
 cleanup:
 	for (--i; i >= 0; --i) {
 		priv = usb_get_serial_port_data(serial->port[i]);
-		free_ringbuf(priv->buf);
 		kfree(priv);
 		usb_set_serial_port_data(serial->port[i] , NULL);
 	}
@@ -358,15 +216,9 @@ cleanup:
 static void spcp8x5_release(struct usb_serial *serial)
 {
 	int i;
-	struct spcp8x5_private *priv;
 
-	for (i = 0; i < serial->num_ports; i++) {
-		priv = usb_get_serial_port_data(serial->port[i]);
-		if (priv) {
-			free_ringbuf(priv->buf);
-			kfree(priv);
-		}
-	}
+	for (i = 0; i < serial->num_ports; i++)
+		kfree(usb_get_serial_port_data(serial->port[i]));
 }
 
 /* set the modem control line of the device.
@@ -470,33 +322,6 @@ static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
 	spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
 }
 
-/* close the serial port. We should wait for data sending to device 1st and
- * then kill all urb. */
-static void spcp8x5_close(struct usb_serial_port *port)
-{
-	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-	int result;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	/* clear out any remaining data in the buffer */
-	clear_ringbuf(priv->buf);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	/* kill urb */
-	if (port->write_urb != NULL) {
-		result = usb_unlink_urb(port->write_urb);
-		if (result)
-			dev_dbg(&port->dev,
-				"usb_unlink_urb(write_urb) = %d\n", result);
-	}
-	result = usb_unlink_urb(port->read_urb);
-	if (result)
-		dev_dbg(&port->dev, "usb_unlink_urb(read_urb) = %d\n", result);
-}
-
 static void spcp8x5_init_termios(struct tty_struct *tty)
 {
 	/* for the 1st time call this function */
@@ -620,7 +445,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 }
 
 /* open the serial port. do some usb system call. set termios and get the line
- * status of the device. then submit the read urb */
+ * status of the device. */
 static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ktermios tmp_termios;
@@ -655,52 +480,21 @@ static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
 	priv->line_status = status & 0xf0 ;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	dbg("%s - submitting read urb", __func__);
-	port->read_urb->dev = serial->dev;
-	ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (ret) {
-		spcp8x5_close(port);
-		return -EPROTO;
-	}
 	port->port.drain_delay = 256;
-	return 0;
+
+	return usb_serial_generic_open(tty, port);
 }
 
-/* bulk read call back function. check the status of the urb. if transfer
- * failed return. then update the status and the tty send data to tty subsys.
- * submit urb again.
- */
-static void spcp8x5_read_bulk_callback(struct urb *urb)
+static void spcp8x5_process_read_urb(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	struct tty_struct *tty;
 	unsigned char *data = urb->transfer_buffer;
 	unsigned long flags;
-	int result = urb->status;
 	u8 status;
 	char tty_flag;
 
-	dev_dbg(&port->dev, "start, result = %d, urb->actual_length = %d\n,",
-		result, urb->actual_length);
-
-	/* check the urb status */
-	if (result) {
-		if (result == -EPROTO) {
-			/* spcp8x5 mysteriously fails with -EPROTO */
-			/* reschedule the read */
-			urb->dev = port->serial->dev;
-			result = usb_submit_urb(urb , GFP_ATOMIC);
-			if (result)
-				dev_dbg(&port->dev,
-					"failed submitting read urb %d\n",
-					result);
-			return;
-		}
-		dev_dbg(&port->dev, "unable to handle the error, exiting.\n");
-		return;
-	}
-
 	/* get tty_flag from status */
 	tty_flag = TTY_NORMAL;
 
@@ -711,141 +505,33 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
 	/* wake up the wait for termios */
 	wake_up_interruptible(&priv->delta_msr_wait);
 
-	/* break takes precedence over parity, which takes precedence over
-	 * framing errors */
-	if (status & UART_BREAK_ERROR)
-		tty_flag = TTY_BREAK;
-	else if (status & UART_PARITY_ERROR)
-		tty_flag = TTY_PARITY;
-	else if (status & UART_FRAME_ERROR)
-		tty_flag = TTY_FRAME;
-	dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
-
-	tty = tty_port_tty_get(&port->port);
-	if (tty && urb->actual_length) {
-		/* overrun is special, not associated with a char */
-		if (status & UART_OVERRUN_ERROR)
-			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-		tty_insert_flip_string_fixed_flag(tty, data,
-						urb->actual_length, tty_flag);
-		tty_flip_buffer_push(tty);
-	}
-	tty_kref_put(tty);
-
-	/* Schedule the next read */
-	urb->dev = port->serial->dev;
-	result = usb_submit_urb(urb , GFP_ATOMIC);
-	if (result)
-		dev_dbg(&port->dev, "failed submitting read urb %d\n", result);
-}
-
-/* get data from ring buffer and then write to usb bus */
-static void spcp8x5_send(struct usb_serial_port *port)
-{
-	int count, result;
-	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	if (priv->write_urb_in_use) {
-		dev_dbg(&port->dev, "write urb still used\n");
-		spin_unlock_irqrestore(&priv->lock, flags);
+	if (!urb->actual_length)
 		return;
-	}
-
-	/* send the 1st urb for writting */
-	memset(port->write_urb->transfer_buffer , 0x00 , port->bulk_out_size);
-	count = get_ringbuf(priv->buf, port->write_urb->transfer_buffer,
-		port->bulk_out_size);
 
-	if (count == 0) {
-		spin_unlock_irqrestore(&priv->lock, flags);
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
 		return;
-	}
-
-	/* update the urb status */
-	priv->write_urb_in_use = 1;
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	port->write_urb->transfer_buffer_length = count;
-	port->write_urb->dev = port->serial->dev;
-
-	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-	if (result) {
-		dev_dbg(&port->dev, "failed submitting write urb, error %d\n",
-			result);
-		priv->write_urb_in_use = 0;
-		/* TODO: reschedule spcp8x5_send */
-	}
-
-
-	schedule_work(&port->work);
-}
 
-/* this is the call back function for write urb. NOTE we should not sleep in
- * this routine. check the urb return code and then submit the write urb again
- * to hold the write loop */
-static void spcp8x5_write_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
-	int result;
-	int status = urb->status;
+	if (status & UART_STATE_TRANSIENT_MASK) {
+		/* break takes precedence over parity, which takes precedence
+		 * over framing errors */
+		if (status & UART_BREAK_ERROR)
+			tty_flag = TTY_BREAK;
+		else if (status & UART_PARITY_ERROR)
+			tty_flag = TTY_PARITY;
+		else if (status & UART_FRAME_ERROR)
+			tty_flag = TTY_FRAME;
+		dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
 
-	switch (status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dev_dbg(&port->dev, "urb shutting down with status: %d\n",
-			status);
-		priv->write_urb_in_use = 0;
-		return;
-	default:
-		/* error in the urb, so we have to resubmit it */
-		dbg("%s - Overflow in write", __func__);
-		dbg("%s - nonzero write bulk status received: %d",
-			__func__, status);
-		port->write_urb->transfer_buffer_length = 1;
-		port->write_urb->dev = port->serial->dev;
-		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-		if (result)
-			dev_dbg(&port->dev,
-				"failed resubmitting write urb %d\n", result);
-		else
-			return;
+		/* overrun is special, not associated with a char */
+		if (status & UART_OVERRUN_ERROR)
+			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
 	}
 
-	priv->write_urb_in_use = 0;
-
-	/* send any buffered data */
-	spcp8x5_send(port);
-}
-
-/* write data to ring buffer. and then start the write transfer */
-static int spcp8x5_write(struct tty_struct *tty, struct usb_serial_port *port,
-			 const unsigned char *buf, int count)
-{
-	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-
-	dev_dbg(&port->dev, "%d bytes\n", count);
-
-	if (!count)
-		return count;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	count = put_ringbuf(priv->buf, buf, count);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	spcp8x5_send(port);
-
-	return count;
+	tty_insert_flip_string_fixed_flag(tty, data, tty_flag,
+							urb->actual_length);
+	tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
 }
 
 static int spcp8x5_wait_modem_info(struct usb_serial_port *port,
@@ -953,36 +639,6 @@ static int spcp8x5_tiocmget(struct tty_struct *tty, struct file *file)
 	return result;
 }
 
-/* get the avail space room in ring buffer */
-static int spcp8x5_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
-	int room = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	room = ringbuf_avail_space(priv->buf);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	return room;
-}
-
-/* get the number of avail data in write ring buffer */
-static int spcp8x5_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
-	int chars = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	chars = ringbuf_avail_data(priv->buf);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	return chars;
-}
-
 /* All of the device info needed for the spcp8x5 SIO serial converter */
 static struct usb_serial_driver spcp8x5_device = {
 	.driver = {
@@ -992,21 +648,16 @@ static struct usb_serial_driver spcp8x5_device = {
 	.id_table		= id_table,
 	.num_ports		= 1,
 	.open 			= spcp8x5_open,
-	.close 			= spcp8x5_close,
 	.dtr_rts		= spcp8x5_dtr_rts,
 	.carrier_raised		= spcp8x5_carrier_raised,
-	.write 			= spcp8x5_write,
 	.set_termios 		= spcp8x5_set_termios,
 	.init_termios		= spcp8x5_init_termios,
 	.ioctl 			= spcp8x5_ioctl,
 	.tiocmget 		= spcp8x5_tiocmget,
 	.tiocmset 		= spcp8x5_tiocmset,
-	.write_room 		= spcp8x5_write_room,
-	.read_bulk_callback 	= spcp8x5_read_bulk_callback,
-	.write_bulk_callback	= spcp8x5_write_bulk_callback,
-	.chars_in_buffer 	= spcp8x5_chars_in_buffer,
 	.attach 		= spcp8x5_startup,
 	.release 		= spcp8x5_release,
+	.process_read_urb	= spcp8x5_process_read_urb,
 };
 
 static int __init spcp8x5_init(void)
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 0afe5c71c17..90979a1f531 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -30,7 +30,7 @@
 #include <linux/spinlock.h>
 #include <linux/ioctl.h>
 #include <linux/serial.h>
-#include <linux/circ_buf.h>
+#include <linux/kfifo.h>
 #include <linux/mutex.h>
 #include <linux/uaccess.h>
 #include <linux/usb.h>
@@ -40,7 +40,7 @@
 
 /* Defines */
 
-#define TI_DRIVER_VERSION	"v0.9"
+#define TI_DRIVER_VERSION	"v0.10"
 #define TI_DRIVER_AUTHOR	"Al Borchers <alborchers@steinerpoint.com>"
 #define TI_DRIVER_DESC		"TI USB 3410/5052 Serial Driver"
 
@@ -82,7 +82,7 @@ struct ti_port {
 	spinlock_t		tp_lock;
 	int			tp_read_urb_state;
 	int			tp_write_urb_in_use;
-	struct circ_buf		*tp_write_buf;
+	struct kfifo		write_fifo;
 };
 
 struct ti_device {
@@ -144,15 +144,6 @@ static int ti_write_byte(struct ti_device *tdev, unsigned long addr,
 
 static int ti_download_firmware(struct ti_device *tdev);
 
-/* circular buffer */
-static struct circ_buf *ti_buf_alloc(void);
-static void ti_buf_free(struct circ_buf *cb);
-static void ti_buf_clear(struct circ_buf *cb);
-static int ti_buf_data_avail(struct circ_buf *cb);
-static int ti_buf_space_avail(struct circ_buf *cb);
-static int ti_buf_put(struct circ_buf *cb, const char *buf, int count);
-static int ti_buf_get(struct circ_buf *cb, char *buf, int count);
-
 
 /* Data */
 
@@ -172,7 +163,7 @@ static unsigned int product_5052_count;
 /* the array dimension is the number of default entries plus */
 /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
 /* null entry */
-static struct usb_device_id ti_id_table_3410[10+TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
@@ -180,6 +171,9 @@ static struct usb_device_id ti_id_table_3410[10+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
@@ -192,7 +186,7 @@ static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
 };
 
-static struct usb_device_id ti_id_table_combined[14+2*TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
@@ -200,6 +194,9 @@ static struct usb_device_id ti_id_table_combined[14+2*TI_EXTRA_VID_PID_COUNT+1]
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
@@ -287,6 +284,8 @@ MODULE_FIRMWARE("ti_5052.fw");
 MODULE_FIRMWARE("mts_cdma.fw");
 MODULE_FIRMWARE("mts_gsm.fw");
 MODULE_FIRMWARE("mts_edge.fw");
+MODULE_FIRMWARE("mts_mt9234mu.fw");
+MODULE_FIRMWARE("mts_mt9234zba.fw");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes");
@@ -442,8 +441,8 @@ static int ti_startup(struct usb_serial *serial)
 		tport->tp_closing_wait = closing_wait;
 		init_waitqueue_head(&tport->tp_msr_wait);
 		init_waitqueue_head(&tport->tp_write_wait);
-		tport->tp_write_buf = ti_buf_alloc();
-		if (tport->tp_write_buf == NULL) {
+		if (kfifo_alloc(&tport->write_fifo, TI_WRITE_BUF_SIZE,
+								GFP_KERNEL)) {
 			dev_err(&dev->dev, "%s - out of memory\n", __func__);
 			kfree(tport);
 			status = -ENOMEM;
@@ -460,7 +459,7 @@ static int ti_startup(struct usb_serial *serial)
 free_tports:
 	for (--i; i >= 0; --i) {
 		tport = usb_get_serial_port_data(serial->port[i]);
-		ti_buf_free(tport->tp_write_buf);
+		kfifo_free(&tport->write_fifo);
 		kfree(tport);
 		usb_set_serial_port_data(serial->port[i], NULL);
 	}
@@ -482,7 +481,7 @@ static void ti_release(struct usb_serial *serial)
 	for (i = 0; i < serial->num_ports; ++i) {
 		tport = usb_get_serial_port_data(serial->port[i]);
 		if (tport) {
-			ti_buf_free(tport->tp_write_buf);
+			kfifo_free(&tport->write_fifo);
 			kfree(tport);
 		}
 	}
@@ -693,7 +692,6 @@ static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *data, int count)
 {
 	struct ti_port *tport = usb_get_serial_port_data(port);
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -705,10 +703,8 @@ static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
 	if (tport == NULL || !tport->tp_is_open)
 		return -ENODEV;
 
-	spin_lock_irqsave(&tport->tp_lock, flags);
-	count = ti_buf_put(tport->tp_write_buf, data, count);
-	spin_unlock_irqrestore(&tport->tp_lock, flags);
-
+	count = kfifo_in_locked(&tport->write_fifo, data, count,
+							&tport->tp_lock);
 	ti_send(tport);
 
 	return count;
@@ -728,7 +724,7 @@ static int ti_write_room(struct tty_struct *tty)
 		return 0;
 
 	spin_lock_irqsave(&tport->tp_lock, flags);
-	room = ti_buf_space_avail(tport->tp_write_buf);
+	room = kfifo_avail(&tport->write_fifo);
 	spin_unlock_irqrestore(&tport->tp_lock, flags);
 
 	dbg("%s - returns %d", __func__, room);
@@ -749,7 +745,7 @@ static int ti_chars_in_buffer(struct tty_struct *tty)
 		return 0;
 
 	spin_lock_irqsave(&tport->tp_lock, flags);
-	chars = ti_buf_data_avail(tport->tp_write_buf);
+	chars = kfifo_len(&tport->write_fifo);
 	spin_unlock_irqrestore(&tport->tp_lock, flags);
 
 	dbg("%s - returns %d", __func__, chars);
@@ -1301,7 +1297,7 @@ static void ti_send(struct ti_port *tport)
 	if (tport->tp_write_urb_in_use)
 		goto unlock;
 
-	count = ti_buf_get(tport->tp_write_buf,
+	count = kfifo_out(&tport->write_fifo,
 				port->write_urb->transfer_buffer,
 				port->bulk_out_size);
 
@@ -1496,7 +1492,7 @@ static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush)
 	add_wait_queue(&tport->tp_write_wait, &wait);
 	for (;;) {
 		set_current_state(TASK_INTERRUPTIBLE);
-		if (ti_buf_data_avail(tport->tp_write_buf) == 0
+		if (kfifo_len(&tport->write_fifo) == 0
 		|| timeout == 0 || signal_pending(current)
 		|| tdev->td_urb_error
 		|| port->serial->disconnected)  /* disconnect */
@@ -1510,7 +1506,7 @@ static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush)
 
 	/* flush any remaining data in the buffer */
 	if (flush)
-		ti_buf_clear(tport->tp_write_buf);
+		kfifo_reset_out(&tport->write_fifo);
 
 	spin_unlock_irq(&tport->tp_lock);
 
@@ -1687,6 +1683,7 @@ static int ti_download_firmware(struct ti_device *tdev)
 	const struct firmware *fw_p;
 	char buf[32];
 
+	dbg("%s\n", __func__);
 	/* try ID specific firmware first, then try generic firmware */
 	sprintf(buf, "ti_usb-v%04x-p%04x.fw", dev->descriptor.idVendor,
 	    dev->descriptor.idProduct);
@@ -1703,7 +1700,15 @@ static int ti_download_firmware(struct ti_device *tdev)
 			case MTS_EDGE_PRODUCT_ID:
 				strcpy(buf, "mts_edge.fw");
 				break;
-			}
+			case MTS_MT9234MU_PRODUCT_ID:
+				strcpy(buf, "mts_mt9234mu.fw");
+				break;
+			case MTS_MT9234ZBA_PRODUCT_ID:
+				strcpy(buf, "mts_mt9234zba.fw");
+				break;
+			case MTS_MT9234ZBAOLD_PRODUCT_ID:
+				strcpy(buf, "mts_mt9234zba.fw");
+				break;			}
 		}
 		if (buf[0] == '\0') {
 			if (tdev->td_is_3410)
@@ -1718,7 +1723,7 @@ static int ti_download_firmware(struct ti_device *tdev)
 		return -ENOENT;
 	}
 	if (fw_p->size > TI_FIRMWARE_BUF_SIZE) {
-		dev_err(&dev->dev, "%s - firmware too large\n", __func__);
+		dev_err(&dev->dev, "%s - firmware too large %zu\n", __func__, fw_p->size);
 		return -ENOENT;
 	}
 
@@ -1730,6 +1735,7 @@ static int ti_download_firmware(struct ti_device *tdev)
 		status = ti_do_download(dev, pipe, buffer, fw_p->size);
 		kfree(buffer);
 	} else {
+		dbg("%s ENOMEM\n", __func__);
 		status = -ENOMEM;
 	}
 	release_firmware(fw_p);
@@ -1743,142 +1749,3 @@ static int ti_download_firmware(struct ti_device *tdev)
 
 	return 0;
 }
-
-
-/* Circular Buffer Functions */
-
-/*
- * ti_buf_alloc
- *
- * Allocate a circular buffer and all associated memory.
- */
-
-static struct circ_buf *ti_buf_alloc(void)
-{
-	struct circ_buf *cb;
-
-	cb = kmalloc(sizeof(struct circ_buf), GFP_KERNEL);
-	if (cb == NULL)
-		return NULL;
-
-	cb->buf = kmalloc(TI_WRITE_BUF_SIZE, GFP_KERNEL);
-	if (cb->buf == NULL) {
-		kfree(cb);
-		return NULL;
-	}
-
-	ti_buf_clear(cb);
-
-	return cb;
-}
-
-
-/*
- * ti_buf_free
- *
- * Free the buffer and all associated memory.
- */
-
-static void ti_buf_free(struct circ_buf *cb)
-{
-	kfree(cb->buf);
-	kfree(cb);
-}
-
-
-/*
- * ti_buf_clear
- *
- * Clear out all data in the circular buffer.
- */
-
-static void ti_buf_clear(struct circ_buf *cb)
-{
-	cb->head = cb->tail = 0;
-}
-
-
-/*
- * ti_buf_data_avail
- *
- * Return the number of bytes of data available in the circular
- * buffer.
- */
-
-static int ti_buf_data_avail(struct circ_buf *cb)
-{
-	return CIRC_CNT(cb->head, cb->tail, TI_WRITE_BUF_SIZE);
-}
-
-
-/*
- * ti_buf_space_avail
- *
- * Return the number of bytes of space available in the circular
- * buffer.
- */
-
-static int ti_buf_space_avail(struct circ_buf *cb)
-{
-	return CIRC_SPACE(cb->head, cb->tail, TI_WRITE_BUF_SIZE);
-}
-
-
-/*
- * ti_buf_put
- *
- * Copy data data from a user buffer and put it into the circular buffer.
- * Restrict to the amount of space available.
- *
- * Return the number of bytes copied.
- */
-
-static int ti_buf_put(struct circ_buf *cb, const char *buf, int count)
-{
-	int c, ret = 0;
-
-	while (1) {
-		c = CIRC_SPACE_TO_END(cb->head, cb->tail, TI_WRITE_BUF_SIZE);
-		if (count < c)
-			c = count;
-		if (c <= 0)
-			break;
-		memcpy(cb->buf + cb->head, buf, c);
-		cb->head = (cb->head + c) & (TI_WRITE_BUF_SIZE-1);
-		buf += c;
-		count -= c;
-		ret += c;
-	}
-
-	return ret;
-}
-
-
-/*
- * ti_buf_get
- *
- * Get data from the circular buffer and copy to the given buffer.
- * Restrict to the amount of data available.
- *
- * Return the number of bytes copied.
- */
-
-static int ti_buf_get(struct circ_buf *cb, char *buf, int count)
-{
-	int c, ret = 0;
-
-	while (1) {
-		c = CIRC_CNT_TO_END(cb->head, cb->tail, TI_WRITE_BUF_SIZE);
-		if (count < c)
-			c = count;
-		if (c <= 0)
-			break;
-		memcpy(buf, cb->buf + cb->tail, c);
-		cb->tail = (cb->tail + c) & (TI_WRITE_BUF_SIZE-1);
-		buf += c;
-		count -= c;
-		ret += c;
-	}
-
-	return ret;
-}
diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h
index f323c602585..2aac1953993 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.h
+++ b/drivers/usb/serial/ti_usb_3410_5052.h
@@ -45,6 +45,9 @@
 #define MTS_CDMA_PRODUCT_ID		0xF110
 #define MTS_GSM_PRODUCT_ID		0xF111
 #define MTS_EDGE_PRODUCT_ID		0xF112
+#define MTS_MT9234MU_PRODUCT_ID		0xF114
+#define MTS_MT9234ZBA_PRODUCT_ID	0xF115
+#define MTS_MT9234ZBAOLD_PRODUCT_ID	0x0319
 
 /* Commands */
 #define TI_GET_VERSION			0x01
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 3873660d821..941c2d409f8 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -289,7 +289,7 @@ static void serial_down(struct tty_port *tport)
 	 * The console is magical.  Do not hang up the console hardware
 	 * or there will be tears.
 	 */
-	if (port->console)
+	if (port->port.console)
 		return;
 	if (drv->close)
 		drv->close(port);
@@ -328,7 +328,7 @@ static void serial_cleanup(struct tty_struct *tty)
 	/* The console is magical.  Do not hang up the console hardware
 	 * or there will be tears.
 	 */
-	if (port->console)
+	if (port->port.console)
 		return;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -548,8 +548,12 @@ static void usb_serial_port_work(struct work_struct *work)
 
 static void kill_traffic(struct usb_serial_port *port)
 {
+	int i;
+
 	usb_kill_urb(port->read_urb);
 	usb_kill_urb(port->write_urb);
+	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
+		usb_kill_urb(port->write_urbs[i]);
 	/*
 	 * This is tricky.
 	 * Some drivers submit the read_urb in the
@@ -568,6 +572,7 @@ static void kill_traffic(struct usb_serial_port *port)
 static void port_release(struct device *dev)
 {
 	struct usb_serial_port *port = to_usb_serial_port(dev);
+	int i;
 
 	dbg ("%s - %s", __func__, dev_name(dev));
 
@@ -582,6 +587,10 @@ static void port_release(struct device *dev)
 	usb_free_urb(port->write_urb);
 	usb_free_urb(port->interrupt_in_urb);
 	usb_free_urb(port->interrupt_out_urb);
+	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) {
+		usb_free_urb(port->write_urbs[i]);
+		kfree(port->bulk_out_buffers[i]);
+	}
 	kfifo_free(&port->write_fifo);
 	kfree(port->bulk_in_buffer);
 	kfree(port->bulk_out_buffer);
@@ -901,7 +910,9 @@ int usb_serial_probe(struct usb_interface *interface,
 			dev_err(&interface->dev, "No free urbs available\n");
 			goto probe_error;
 		}
-		buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+		buffer_size = serial->type->bulk_in_size;
+		if (!buffer_size)
+			buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
 		port->bulk_in_size = buffer_size;
 		port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
 		port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
@@ -918,6 +929,8 @@ int usb_serial_probe(struct usb_interface *interface,
 	}
 
 	for (i = 0; i < num_bulk_out; ++i) {
+		int j;
+
 		endpoint = bulk_out_endpoint[i];
 		port = serial->port[i];
 		port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
@@ -927,7 +940,9 @@ int usb_serial_probe(struct usb_interface *interface,
 		}
 		if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))
 			goto probe_error;
-		buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+		buffer_size = serial->type->bulk_out_size;
+		if (!buffer_size)
+			buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
 		port->bulk_out_size = buffer_size;
 		port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
 		port->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
@@ -941,6 +956,28 @@ int usb_serial_probe(struct usb_interface *interface,
 					endpoint->bEndpointAddress),
 				port->bulk_out_buffer, buffer_size,
 				serial->type->write_bulk_callback, port);
+		for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) {
+			set_bit(j, &port->write_urbs_free);
+			port->write_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
+			if (!port->write_urbs[j]) {
+				dev_err(&interface->dev,
+						"No free urbs available\n");
+				goto probe_error;
+			}
+			port->bulk_out_buffers[j] = kmalloc(buffer_size,
+								GFP_KERNEL);
+			if (!port->bulk_out_buffers[j]) {
+				dev_err(&interface->dev,
+					"Couldn't allocate bulk_out_buffer\n");
+				goto probe_error;
+			}
+			usb_fill_bulk_urb(port->write_urbs[j], dev,
+					usb_sndbulkpipe(dev,
+						endpoint->bEndpointAddress),
+					port->bulk_out_buffers[j], buffer_size,
+					serial->type->write_bulk_callback,
+					port);
+		}
 	}
 
 	if (serial->type->read_int_callback) {
@@ -1294,6 +1331,8 @@ static void fixup_generic(struct usb_serial_driver *device)
 	set_to_generic_if_null(device, write_bulk_callback);
 	set_to_generic_if_null(device, disconnect);
 	set_to_generic_if_null(device, release);
+	set_to_generic_if_null(device, process_read_urb);
+	set_to_generic_if_null(device, prepare_write_buffer);
 }
 
 int usb_serial_register(struct usb_serial_driver *driver)
diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h
new file mode 100644
index 00000000000..2be298a1305
--- /dev/null
+++ b/drivers/usb/serial/usb-wwan.h
@@ -0,0 +1,67 @@
+/*
+ * Definitions for USB serial mobile broadband cards
+ */
+
+#ifndef __LINUX_USB_USB_WWAN
+#define __LINUX_USB_USB_WWAN
+
+extern void usb_wwan_dtr_rts(struct usb_serial_port *port, int on);
+extern int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port);
+extern void usb_wwan_close(struct usb_serial_port *port);
+extern int usb_wwan_startup(struct usb_serial *serial);
+extern void usb_wwan_disconnect(struct usb_serial *serial);
+extern void usb_wwan_release(struct usb_serial *serial);
+extern int usb_wwan_write_room(struct tty_struct *tty);
+extern void usb_wwan_set_termios(struct tty_struct *tty,
+				 struct usb_serial_port *port,
+				 struct ktermios *old);
+extern int usb_wwan_tiocmget(struct tty_struct *tty, struct file *file);
+extern int usb_wwan_tiocmset(struct tty_struct *tty, struct file *file,
+			     unsigned int set, unsigned int clear);
+extern int usb_wwan_send_setup(struct usb_serial_port *port);
+extern int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
+			  const unsigned char *buf, int count);
+extern int usb_wwan_chars_in_buffer(struct tty_struct *tty);
+#ifdef CONFIG_PM
+extern int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message);
+extern int usb_wwan_resume(struct usb_serial *serial);
+#endif
+
+/* per port private data */
+
+#define N_IN_URB 4
+#define N_OUT_URB 4
+#define IN_BUFLEN 4096
+#define OUT_BUFLEN 4096
+
+struct usb_wwan_intf_private {
+	spinlock_t susp_lock;
+	unsigned int suspended:1;
+	int in_flight;
+	int (*send_setup) (struct usb_serial_port *port);
+	void *private;
+};
+
+struct usb_wwan_port_private {
+	/* Input endpoints and buffer for this port */
+	struct urb *in_urbs[N_IN_URB];
+	u8 *in_buffer[N_IN_URB];
+	/* Output endpoints and buffer for this port */
+	struct urb *out_urbs[N_OUT_URB];
+	u8 *out_buffer[N_OUT_URB];
+	unsigned long out_busy;	/* Bit vector of URBs in use */
+	int opened;
+	struct usb_anchor delayed;
+
+	/* Settings for the port */
+	int rts_state;		/* Handshaking pins (outputs) */
+	int dtr_state;
+	int cts_state;		/* Handshaking pins (inputs) */
+	int dsr_state;
+	int dcd_state;
+	int ri_state;
+
+	unsigned long tx_start_time[N_OUT_URB];
+};
+
+#endif /* __LINUX_USB_USB_WWAN */
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index 28026b47344..f2ed6a31be7 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -16,7 +16,6 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
-#define URB_DEBUG_MAX_IN_FLIGHT_URBS	4000
 #define USB_DEBUG_MAX_PACKET_SIZE	8
 #define USB_DEBUG_BRK_SIZE		8
 static char USB_DEBUG_BRK[USB_DEBUG_BRK_SIZE] = {
@@ -44,12 +43,6 @@ static struct usb_driver debug_driver = {
 	.no_dynamic_id = 	1,
 };
 
-static int usb_debug_open(struct tty_struct *tty, struct usb_serial_port *port)
-{
-	port->bulk_out_size = USB_DEBUG_MAX_PACKET_SIZE;
-	return usb_serial_generic_open(tty, port);
-}
-
 /* This HW really does not support a serial break, so one will be
  * emulated when ever the break state is set to true.
  */
@@ -69,7 +62,7 @@ static void usb_debug_read_bulk_callback(struct urb *urb)
 	    memcmp(urb->transfer_buffer, USB_DEBUG_BRK,
 		   USB_DEBUG_BRK_SIZE) == 0) {
 		usb_serial_handle_break(port);
-		usb_serial_generic_resubmit_read_urb(port, GFP_ATOMIC);
+		usb_serial_generic_submit_read_urb(port, GFP_ATOMIC);
 		return;
 	}
 
@@ -83,8 +76,7 @@ static struct usb_serial_driver debug_device = {
 	},
 	.id_table =		id_table,
 	.num_ports =		1,
-	.open =			usb_debug_open,
-	.max_in_flight_urbs =	URB_DEBUG_MAX_IN_FLIGHT_URBS,
+	.bulk_out_size =	USB_DEBUG_MAX_PACKET_SIZE,
 	.break_ctl =		usb_debug_break_ctl,
 	.read_bulk_callback =	usb_debug_read_bulk_callback,
 };
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
new file mode 100644
index 00000000000..0c70b4a621b
--- /dev/null
+++ b/drivers/usb/serial/usb_wwan.c
@@ -0,0 +1,665 @@
+/*
+  USB Driver layer for GSM modems
+
+  Copyright (C) 2005  Matthias Urlichs <smurf@smurf.noris.de>
+
+  This driver is free software; you can redistribute it and/or modify
+  it under the terms of Version 2 of the GNU General Public License as
+  published by the Free Software Foundation.
+
+  Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
+
+  History: see the git log.
+
+  Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
+
+  This driver exists because the "normal" serial driver doesn't work too well
+  with GSM modems. Issues:
+  - data loss -- one single Receive URB is not nearly enough
+  - controlling the baud rate doesn't make sense
+*/
+
+#define DRIVER_VERSION "v0.7.2"
+#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
+#define DRIVER_DESC "USB Driver for GSM modems"
+
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include "usb-wwan.h"
+
+static int debug;
+
+void usb_wwan_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct usb_serial *serial = port->serial;
+	struct usb_wwan_port_private *portdata;
+
+	struct usb_wwan_intf_private *intfdata;
+
+	dbg("%s", __func__);
+
+	intfdata = port->serial->private;
+
+	if (!intfdata->send_setup)
+		return;
+
+	portdata = usb_get_serial_port_data(port);
+	mutex_lock(&serial->disc_mutex);
+	portdata->rts_state = on;
+	portdata->dtr_state = on;
+	if (serial->dev)
+		intfdata->send_setup(port);
+	mutex_unlock(&serial->disc_mutex);
+}
+EXPORT_SYMBOL(usb_wwan_dtr_rts);
+
+void usb_wwan_set_termios(struct tty_struct *tty,
+			  struct usb_serial_port *port,
+			  struct ktermios *old_termios)
+{
+	struct usb_wwan_intf_private *intfdata = port->serial->private;
+
+	dbg("%s", __func__);
+
+	/* Doesn't support option setting */
+	tty_termios_copy_hw(tty->termios, old_termios);
+
+	if (intfdata->send_setup)
+		intfdata->send_setup(port);
+}
+EXPORT_SYMBOL(usb_wwan_set_termios);
+
+int usb_wwan_tiocmget(struct tty_struct *tty, struct file *file)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	unsigned int value;
+	struct usb_wwan_port_private *portdata;
+
+	portdata = usb_get_serial_port_data(port);
+
+	value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
+	    ((portdata->dtr_state) ? TIOCM_DTR : 0) |
+	    ((portdata->cts_state) ? TIOCM_CTS : 0) |
+	    ((portdata->dsr_state) ? TIOCM_DSR : 0) |
+	    ((portdata->dcd_state) ? TIOCM_CAR : 0) |
+	    ((portdata->ri_state) ? TIOCM_RNG : 0);
+
+	return value;
+}
+EXPORT_SYMBOL(usb_wwan_tiocmget);
+
+int usb_wwan_tiocmset(struct tty_struct *tty, struct file *file,
+		      unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_wwan_port_private *portdata;
+	struct usb_wwan_intf_private *intfdata;
+
+	portdata = usb_get_serial_port_data(port);
+	intfdata = port->serial->private;
+
+	if (!intfdata->send_setup)
+		return -EINVAL;
+
+	/* FIXME: what locks portdata fields ? */
+	if (set & TIOCM_RTS)
+		portdata->rts_state = 1;
+	if (set & TIOCM_DTR)
+		portdata->dtr_state = 1;
+
+	if (clear & TIOCM_RTS)
+		portdata->rts_state = 0;
+	if (clear & TIOCM_DTR)
+		portdata->dtr_state = 0;
+	return intfdata->send_setup(port);
+}
+EXPORT_SYMBOL(usb_wwan_tiocmset);
+
+/* Write */
+int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
+		   const unsigned char *buf, int count)
+{
+	struct usb_wwan_port_private *portdata;
+	struct usb_wwan_intf_private *intfdata;
+	int i;
+	int left, todo;
+	struct urb *this_urb = NULL;	/* spurious */
+	int err;
+	unsigned long flags;
+
+	portdata = usb_get_serial_port_data(port);
+	intfdata = port->serial->private;
+
+	dbg("%s: write (%d chars)", __func__, count);
+
+	i = 0;
+	left = count;
+	for (i = 0; left > 0 && i < N_OUT_URB; i++) {
+		todo = left;
+		if (todo > OUT_BUFLEN)
+			todo = OUT_BUFLEN;
+
+		this_urb = portdata->out_urbs[i];
+		if (test_and_set_bit(i, &portdata->out_busy)) {
+			if (time_before(jiffies,
+					portdata->tx_start_time[i] + 10 * HZ))
+				continue;
+			usb_unlink_urb(this_urb);
+			continue;
+		}
+		dbg("%s: endpoint %d buf %d", __func__,
+		    usb_pipeendpoint(this_urb->pipe), i);
+
+		err = usb_autopm_get_interface_async(port->serial->interface);
+		if (err < 0)
+			break;
+
+		/* send the data */
+		memcpy(this_urb->transfer_buffer, buf, todo);
+		this_urb->transfer_buffer_length = todo;
+
+		spin_lock_irqsave(&intfdata->susp_lock, flags);
+		if (intfdata->suspended) {
+			usb_anchor_urb(this_urb, &portdata->delayed);
+			spin_unlock_irqrestore(&intfdata->susp_lock, flags);
+		} else {
+			intfdata->in_flight++;
+			spin_unlock_irqrestore(&intfdata->susp_lock, flags);
+			err = usb_submit_urb(this_urb, GFP_ATOMIC);
+			if (err) {
+				dbg("usb_submit_urb %p (write bulk) failed "
+				    "(%d)", this_urb, err);
+				clear_bit(i, &portdata->out_busy);
+				spin_lock_irqsave(&intfdata->susp_lock, flags);
+				intfdata->in_flight--;
+				spin_unlock_irqrestore(&intfdata->susp_lock,
+						       flags);
+				continue;
+			}
+		}
+
+		portdata->tx_start_time[i] = jiffies;
+		buf += todo;
+		left -= todo;
+	}
+
+	count -= left;
+	dbg("%s: wrote (did %d)", __func__, count);
+	return count;
+}
+EXPORT_SYMBOL(usb_wwan_write);
+
+static void usb_wwan_indat_callback(struct urb *urb)
+{
+	int err;
+	int endpoint;
+	struct usb_serial_port *port;
+	struct tty_struct *tty;
+	unsigned char *data = urb->transfer_buffer;
+	int status = urb->status;
+
+	dbg("%s: %p", __func__, urb);
+
+	endpoint = usb_pipeendpoint(urb->pipe);
+	port = urb->context;
+
+	if (status) {
+		dbg("%s: nonzero status: %d on endpoint %02x.",
+		    __func__, status, endpoint);
+	} else {
+		tty = tty_port_tty_get(&port->port);
+		if (urb->actual_length) {
+			tty_insert_flip_string(tty, data, urb->actual_length);
+			tty_flip_buffer_push(tty);
+		} else
+			dbg("%s: empty read urb received", __func__);
+		tty_kref_put(tty);
+
+		/* Resubmit urb so we continue receiving */
+		if (status != -ESHUTDOWN) {
+			err = usb_submit_urb(urb, GFP_ATOMIC);
+			if (err && err != -EPERM)
+				printk(KERN_ERR "%s: resubmit read urb failed. "
+				       "(%d)", __func__, err);
+			else
+				usb_mark_last_busy(port->serial->dev);
+		}
+
+	}
+	return;
+}
+
+static void usb_wwan_outdat_callback(struct urb *urb)
+{
+	struct usb_serial_port *port;
+	struct usb_wwan_port_private *portdata;
+	struct usb_wwan_intf_private *intfdata;
+	int i;
+
+	dbg("%s", __func__);
+
+	port = urb->context;
+	intfdata = port->serial->private;
+
+	usb_serial_port_softint(port);
+	usb_autopm_put_interface_async(port->serial->interface);
+	portdata = usb_get_serial_port_data(port);
+	spin_lock(&intfdata->susp_lock);
+	intfdata->in_flight--;
+	spin_unlock(&intfdata->susp_lock);
+
+	for (i = 0; i < N_OUT_URB; ++i) {
+		if (portdata->out_urbs[i] == urb) {
+			smp_mb__before_clear_bit();
+			clear_bit(i, &portdata->out_busy);
+			break;
+		}
+	}
+}
+
+int usb_wwan_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_wwan_port_private *portdata;
+	int i;
+	int data_len = 0;
+	struct urb *this_urb;
+
+	portdata = usb_get_serial_port_data(port);
+
+	for (i = 0; i < N_OUT_URB; i++) {
+		this_urb = portdata->out_urbs[i];
+		if (this_urb && !test_bit(i, &portdata->out_busy))
+			data_len += OUT_BUFLEN;
+	}
+
+	dbg("%s: %d", __func__, data_len);
+	return data_len;
+}
+EXPORT_SYMBOL(usb_wwan_write_room);
+
+int usb_wwan_chars_in_buffer(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_wwan_port_private *portdata;
+	int i;
+	int data_len = 0;
+	struct urb *this_urb;
+
+	portdata = usb_get_serial_port_data(port);
+
+	for (i = 0; i < N_OUT_URB; i++) {
+		this_urb = portdata->out_urbs[i];
+		/* FIXME: This locking is insufficient as this_urb may
+		   go unused during the test */
+		if (this_urb && test_bit(i, &portdata->out_busy))
+			data_len += this_urb->transfer_buffer_length;
+	}
+	dbg("%s: %d", __func__, data_len);
+	return data_len;
+}
+EXPORT_SYMBOL(usb_wwan_chars_in_buffer);
+
+int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct usb_wwan_port_private *portdata;
+	struct usb_wwan_intf_private *intfdata;
+	struct usb_serial *serial = port->serial;
+	int i, err;
+	struct urb *urb;
+
+	portdata = usb_get_serial_port_data(port);
+	intfdata = serial->private;
+
+	dbg("%s", __func__);
+
+	/* Start reading from the IN endpoint */
+	for (i = 0; i < N_IN_URB; i++) {
+		urb = portdata->in_urbs[i];
+		if (!urb)
+			continue;
+		err = usb_submit_urb(urb, GFP_KERNEL);
+		if (err) {
+			dbg("%s: submit urb %d failed (%d) %d",
+			    __func__, i, err, urb->transfer_buffer_length);
+		}
+	}
+
+	if (intfdata->send_setup)
+		intfdata->send_setup(port);
+
+	serial->interface->needs_remote_wakeup = 1;
+	spin_lock_irq(&intfdata->susp_lock);
+	portdata->opened = 1;
+	spin_unlock_irq(&intfdata->susp_lock);
+	usb_autopm_put_interface(serial->interface);
+
+	return 0;
+}
+EXPORT_SYMBOL(usb_wwan_open);
+
+void usb_wwan_close(struct usb_serial_port *port)
+{
+	int i;
+	struct usb_serial *serial = port->serial;
+	struct usb_wwan_port_private *portdata;
+	struct usb_wwan_intf_private *intfdata = port->serial->private;
+
+	dbg("%s", __func__);
+	portdata = usb_get_serial_port_data(port);
+
+	if (serial->dev) {
+		/* Stop reading/writing urbs */
+		spin_lock_irq(&intfdata->susp_lock);
+		portdata->opened = 0;
+		spin_unlock_irq(&intfdata->susp_lock);
+
+		for (i = 0; i < N_IN_URB; i++)
+			usb_kill_urb(portdata->in_urbs[i]);
+		for (i = 0; i < N_OUT_URB; i++)
+			usb_kill_urb(portdata->out_urbs[i]);
+		usb_autopm_get_interface(serial->interface);
+		serial->interface->needs_remote_wakeup = 0;
+	}
+}
+EXPORT_SYMBOL(usb_wwan_close);
+
+/* Helper functions used by usb_wwan_setup_urbs */
+static struct urb *usb_wwan_setup_urb(struct usb_serial *serial, int endpoint,
+				      int dir, void *ctx, char *buf, int len,
+				      void (*callback) (struct urb *))
+{
+	struct urb *urb;
+
+	if (endpoint == -1)
+		return NULL;	/* endpoint not needed */
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);	/* No ISO */
+	if (urb == NULL) {
+		dbg("%s: alloc for endpoint %d failed.", __func__, endpoint);
+		return NULL;
+	}
+
+	/* Fill URB using supplied data. */
+	usb_fill_bulk_urb(urb, serial->dev,
+			  usb_sndbulkpipe(serial->dev, endpoint) | dir,
+			  buf, len, callback, ctx);
+
+	return urb;
+}
+
+/* Setup urbs */
+static void usb_wwan_setup_urbs(struct usb_serial *serial)
+{
+	int i, j;
+	struct usb_serial_port *port;
+	struct usb_wwan_port_private *portdata;
+
+	dbg("%s", __func__);
+
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		portdata = usb_get_serial_port_data(port);
+
+		/* Do indat endpoints first */
+		for (j = 0; j < N_IN_URB; ++j) {
+			portdata->in_urbs[j] = usb_wwan_setup_urb(serial,
+								  port->
+								  bulk_in_endpointAddress,
+								  USB_DIR_IN,
+								  port,
+								  portdata->
+								  in_buffer[j],
+								  IN_BUFLEN,
+								  usb_wwan_indat_callback);
+		}
+
+		/* outdat endpoints */
+		for (j = 0; j < N_OUT_URB; ++j) {
+			portdata->out_urbs[j] = usb_wwan_setup_urb(serial,
+								   port->
+								   bulk_out_endpointAddress,
+								   USB_DIR_OUT,
+								   port,
+								   portdata->
+								   out_buffer
+								   [j],
+								   OUT_BUFLEN,
+								   usb_wwan_outdat_callback);
+		}
+	}
+}
+
+int usb_wwan_startup(struct usb_serial *serial)
+{
+	int i, j, err;
+	struct usb_serial_port *port;
+	struct usb_wwan_port_private *portdata;
+	u8 *buffer;
+
+	dbg("%s", __func__);
+
+	/* Now setup per port private data */
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
+		if (!portdata) {
+			dbg("%s: kmalloc for usb_wwan_port_private (%d) failed!.",
+			    __func__, i);
+			return 1;
+		}
+		init_usb_anchor(&portdata->delayed);
+
+		for (j = 0; j < N_IN_URB; j++) {
+			buffer = (u8 *) __get_free_page(GFP_KERNEL);
+			if (!buffer)
+				goto bail_out_error;
+			portdata->in_buffer[j] = buffer;
+		}
+
+		for (j = 0; j < N_OUT_URB; j++) {
+			buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
+			if (!buffer)
+				goto bail_out_error2;
+			portdata->out_buffer[j] = buffer;
+		}
+
+		usb_set_serial_port_data(port, portdata);
+
+		if (!port->interrupt_in_urb)
+			continue;
+		err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+		if (err)
+			dbg("%s: submit irq_in urb failed %d", __func__, err);
+	}
+	usb_wwan_setup_urbs(serial);
+	return 0;
+
+bail_out_error2:
+	for (j = 0; j < N_OUT_URB; j++)
+		kfree(portdata->out_buffer[j]);
+bail_out_error:
+	for (j = 0; j < N_IN_URB; j++)
+		if (portdata->in_buffer[j])
+			free_page((unsigned long)portdata->in_buffer[j]);
+	kfree(portdata);
+	return 1;
+}
+EXPORT_SYMBOL(usb_wwan_startup);
+
+static void stop_read_write_urbs(struct usb_serial *serial)
+{
+	int i, j;
+	struct usb_serial_port *port;
+	struct usb_wwan_port_private *portdata;
+
+	/* Stop reading/writing urbs */
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		portdata = usb_get_serial_port_data(port);
+		for (j = 0; j < N_IN_URB; j++)
+			usb_kill_urb(portdata->in_urbs[j]);
+		for (j = 0; j < N_OUT_URB; j++)
+			usb_kill_urb(portdata->out_urbs[j]);
+	}
+}
+
+void usb_wwan_disconnect(struct usb_serial *serial)
+{
+	dbg("%s", __func__);
+
+	stop_read_write_urbs(serial);
+}
+EXPORT_SYMBOL(usb_wwan_disconnect);
+
+void usb_wwan_release(struct usb_serial *serial)
+{
+	int i, j;
+	struct usb_serial_port *port;
+	struct usb_wwan_port_private *portdata;
+
+	dbg("%s", __func__);
+
+	/* Now free them */
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		portdata = usb_get_serial_port_data(port);
+
+		for (j = 0; j < N_IN_URB; j++) {
+			usb_free_urb(portdata->in_urbs[j]);
+			free_page((unsigned long)
+				  portdata->in_buffer[j]);
+			portdata->in_urbs[j] = NULL;
+		}
+		for (j = 0; j < N_OUT_URB; j++) {
+			usb_free_urb(portdata->out_urbs[j]);
+			kfree(portdata->out_buffer[j]);
+			portdata->out_urbs[j] = NULL;
+		}
+	}
+
+	/* Now free per port private data */
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		kfree(usb_get_serial_port_data(port));
+	}
+}
+EXPORT_SYMBOL(usb_wwan_release);
+
+#ifdef CONFIG_PM
+int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message)
+{
+	struct usb_wwan_intf_private *intfdata = serial->private;
+	int b;
+
+	dbg("%s entered", __func__);
+
+	if (message.event & PM_EVENT_AUTO) {
+		spin_lock_irq(&intfdata->susp_lock);
+		b = intfdata->in_flight;
+		spin_unlock_irq(&intfdata->susp_lock);
+
+		if (b)
+			return -EBUSY;
+	}
+
+	spin_lock_irq(&intfdata->susp_lock);
+	intfdata->suspended = 1;
+	spin_unlock_irq(&intfdata->susp_lock);
+	stop_read_write_urbs(serial);
+
+	return 0;
+}
+EXPORT_SYMBOL(usb_wwan_suspend);
+
+static void play_delayed(struct usb_serial_port *port)
+{
+	struct usb_wwan_intf_private *data;
+	struct usb_wwan_port_private *portdata;
+	struct urb *urb;
+	int err;
+
+	portdata = usb_get_serial_port_data(port);
+	data = port->serial->private;
+	while ((urb = usb_get_from_anchor(&portdata->delayed))) {
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (!err)
+			data->in_flight++;
+	}
+}
+
+int usb_wwan_resume(struct usb_serial *serial)
+{
+	int i, j;
+	struct usb_serial_port *port;
+	struct usb_wwan_intf_private *intfdata = serial->private;
+	struct usb_wwan_port_private *portdata;
+	struct urb *urb;
+	int err = 0;
+
+	dbg("%s entered", __func__);
+	/* get the interrupt URBs resubmitted unconditionally */
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		if (!port->interrupt_in_urb) {
+			dbg("%s: No interrupt URB for port %d", __func__, i);
+			continue;
+		}
+		err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
+		dbg("Submitted interrupt URB for port %d (result %d)", i, err);
+		if (err < 0) {
+			err("%s: Error %d for interrupt URB of port%d",
+			    __func__, err, i);
+			goto err_out;
+		}
+	}
+
+	for (i = 0; i < serial->num_ports; i++) {
+		/* walk all ports */
+		port = serial->port[i];
+		portdata = usb_get_serial_port_data(port);
+
+		/* skip closed ports */
+		spin_lock_irq(&intfdata->susp_lock);
+		if (!portdata->opened) {
+			spin_unlock_irq(&intfdata->susp_lock);
+			continue;
+		}
+
+		for (j = 0; j < N_IN_URB; j++) {
+			urb = portdata->in_urbs[j];
+			err = usb_submit_urb(urb, GFP_ATOMIC);
+			if (err < 0) {
+				err("%s: Error %d for bulk URB %d",
+				    __func__, err, i);
+				spin_unlock_irq(&intfdata->susp_lock);
+				goto err_out;
+			}
+		}
+		play_delayed(port);
+		spin_unlock_irq(&intfdata->susp_lock);
+	}
+	spin_lock_irq(&intfdata->susp_lock);
+	intfdata->suspended = 0;
+	spin_unlock_irq(&intfdata->susp_lock);
+err_out:
+	return err;
+}
+EXPORT_SYMBOL(usb_wwan_resume);
+#endif
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug messages");
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 094942707c7..eb76aaef426 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -38,17 +38,9 @@
 /* function prototypes for a handspring visor */
 static int  visor_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void visor_close(struct usb_serial_port *port);
-static int  visor_write(struct tty_struct *tty, struct usb_serial_port *port,
-					const unsigned char *buf, int count);
-static int  visor_write_room(struct tty_struct *tty);
-static void visor_throttle(struct tty_struct *tty);
-static void visor_unthrottle(struct tty_struct *tty);
 static int  visor_probe(struct usb_serial *serial,
 					const struct usb_device_id *id);
 static int  visor_calc_num_ports(struct usb_serial *serial);
-static void visor_release(struct usb_serial *serial);
-static void visor_write_bulk_callback(struct urb *urb);
-static void visor_read_bulk_callback(struct urb *urb);
 static void visor_read_int_callback(struct urb *urb);
 static int  clie_3_5_startup(struct usb_serial *serial);
 static int  treo_attach(struct usb_serial *serial);
@@ -194,18 +186,14 @@ static struct usb_serial_driver handspring_device = {
 	.usb_driver =		&visor_driver,
 	.id_table =		id_table,
 	.num_ports =		2,
+	.bulk_out_size =	256,
 	.open =			visor_open,
 	.close =		visor_close,
-	.throttle =		visor_throttle,
-	.unthrottle =		visor_unthrottle,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
 	.attach =		treo_attach,
 	.probe =		visor_probe,
 	.calc_num_ports =	visor_calc_num_ports,
-	.release =		visor_release,
-	.write =		visor_write,
-	.write_room =		visor_write_room,
-	.write_bulk_callback =	visor_write_bulk_callback,
-	.read_bulk_callback =	visor_read_bulk_callback,
 	.read_int_callback =	visor_read_int_callback,
 };
 
@@ -219,18 +207,14 @@ static struct usb_serial_driver clie_5_device = {
 	.usb_driver =		&visor_driver,
 	.id_table =		clie_id_5_table,
 	.num_ports =		2,
+	.bulk_out_size =	256,
 	.open =			visor_open,
 	.close =		visor_close,
-	.throttle =		visor_throttle,
-	.unthrottle =		visor_unthrottle,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
 	.attach =		clie_5_attach,
 	.probe =		visor_probe,
 	.calc_num_ports =	visor_calc_num_ports,
-	.release =		visor_release,
-	.write =		visor_write,
-	.write_room =		visor_write_room,
-	.write_bulk_callback =	visor_write_bulk_callback,
-	.read_bulk_callback =	visor_read_bulk_callback,
 	.read_int_callback =	visor_read_int_callback,
 };
 
@@ -244,39 +228,19 @@ static struct usb_serial_driver clie_3_5_device = {
 	.usb_driver =		&visor_driver,
 	.id_table =		clie_id_3_5_table,
 	.num_ports =		1,
+	.bulk_out_size =	256,
 	.open =			visor_open,
 	.close =		visor_close,
-	.throttle =		visor_throttle,
-	.unthrottle =		visor_unthrottle,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
 	.attach =		clie_3_5_startup,
-	.write =		visor_write,
-	.write_room =		visor_write_room,
-	.write_bulk_callback =	visor_write_bulk_callback,
-	.read_bulk_callback =	visor_read_bulk_callback,
 };
 
-struct visor_private {
-	spinlock_t lock;
-	int bytes_in;
-	int bytes_out;
-	int outstanding_urbs;
-	unsigned char throttled;
-	unsigned char actually_throttled;
-};
-
-/* number of outstanding urbs to prevent userspace DoS from happening */
-#define URB_UPPER_LIMIT	42
-
-static int stats;
-
 /******************************************************************************
  * Handspring Visor specific driver functions
  ******************************************************************************/
 static int visor_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
-	struct usb_serial *serial = port->serial;
-	struct visor_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
 	int result = 0;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -287,26 +251,10 @@ static int visor_open(struct tty_struct *tty, struct usb_serial_port *port)
 		return -ENODEV;
 	}
 
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->bytes_in = 0;
-	priv->bytes_out = 0;
-	priv->throttled = 0;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	/* Start reading from the device */
-	usb_fill_bulk_urb(port->read_urb, serial->dev,
-			   usb_rcvbulkpipe(serial->dev,
-					    port->bulk_in_endpointAddress),
-			   port->read_urb->transfer_buffer,
-			   port->read_urb->transfer_buffer_length,
-			   visor_read_bulk_callback, port);
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result) {
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-							__func__, result);
+	result = usb_serial_generic_open(tty, port);
+	if (result)
 		goto exit;
-	}
 
 	if (port->interrupt_in_urb) {
 		dbg("%s - adding interrupt input for treo", __func__);
@@ -323,13 +271,12 @@ exit:
 
 static void visor_close(struct usb_serial_port *port)
 {
-	struct visor_private *priv = usb_get_serial_port_data(port);
 	unsigned char *transfer_buffer;
 
 	dbg("%s - port %d", __func__, port->number);
 
 	/* shutdown our urbs */
-	usb_kill_urb(port->read_urb);
+	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
 
 	mutex_lock(&port->serial->disc_mutex);
@@ -346,192 +293,6 @@ static void visor_close(struct usb_serial_port *port)
 		}
 	}
 	mutex_unlock(&port->serial->disc_mutex);
-
-	if (stats)
-		dev_info(&port->dev, "Bytes In = %d  Bytes Out = %d\n",
-			 priv->bytes_in, priv->bytes_out);
-}
-
-
-static int visor_write(struct tty_struct *tty, struct usb_serial_port *port,
-					const unsigned char *buf, int count)
-{
-	struct visor_private *priv = usb_get_serial_port_data(port);
-	struct usb_serial *serial = port->serial;
-	struct urb *urb;
-	unsigned char *buffer;
-	unsigned long flags;
-	int status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	if (priv->outstanding_urbs > URB_UPPER_LIMIT) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		dbg("%s - write limit hit", __func__);
-		return 0;
-	}
-	priv->outstanding_urbs++;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	buffer = kmalloc(count, GFP_ATOMIC);
-	if (!buffer) {
-		dev_err(&port->dev, "out of memory\n");
-		count = -ENOMEM;
-		goto error_no_buffer;
-	}
-
-	urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!urb) {
-		dev_err(&port->dev, "no more free urbs\n");
-		count = -ENOMEM;
-		goto error_no_urb;
-	}
-
-	memcpy(buffer, buf, count);
-
-	usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
-
-	usb_fill_bulk_urb(urb, serial->dev,
-			   usb_sndbulkpipe(serial->dev,
-					    port->bulk_out_endpointAddress),
-			   buffer, count,
-			   visor_write_bulk_callback, port);
-
-	/* send it down the pipe */
-	status = usb_submit_urb(urb, GFP_ATOMIC);
-	if (status) {
-		dev_err(&port->dev,
-		   "%s - usb_submit_urb(write bulk) failed with status = %d\n",
-							__func__, status);
-		count = status;
-		goto error;
-	} else {
-		spin_lock_irqsave(&priv->lock, flags);
-		priv->bytes_out += count;
-		spin_unlock_irqrestore(&priv->lock, flags);
-	}
-
-	/* we are done with this urb, so let the host driver
-	 * really free it when it is finished with it */
-	usb_free_urb(urb);
-
-	return count;
-error:
-	usb_free_urb(urb);
-error_no_urb:
-	kfree(buffer);
-error_no_buffer:
-	spin_lock_irqsave(&priv->lock, flags);
-	--priv->outstanding_urbs;
-	spin_unlock_irqrestore(&priv->lock, flags);
-	return count;
-}
-
-
-static int visor_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct visor_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	/*
-	 * We really can take anything the user throws at us
-	 * but let's pick a nice big number to tell the tty
-	 * layer that we have lots of free space, unless we don't.
-	 */
-
-	spin_lock_irqsave(&priv->lock, flags);
-	if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		dbg("%s - write limit hit", __func__);
-		return 0;
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	return 2048;
-}
-
-
-static void visor_write_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	struct visor_private *priv = usb_get_serial_port_data(port);
-	int status = urb->status;
-	unsigned long flags;
-
-	/* free up the transfer buffer, as usb_free_urb() does not do this */
-	kfree(urb->transfer_buffer);
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status)
-		dbg("%s - nonzero write bulk status received: %d",
-		    __func__, status);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	--priv->outstanding_urbs;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	usb_serial_port_softint(port);
-}
-
-
-static void visor_read_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	struct visor_private *priv = usb_get_serial_port_data(port);
-	unsigned char *data = urb->transfer_buffer;
-	int status = urb->status;
-	struct tty_struct *tty;
-	int result;
-	int available_room = 0;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status) {
-		dbg("%s - nonzero read bulk status received: %d",
-		    __func__, status);
-		return;
-	}
-
-	usb_serial_debug_data(debug, &port->dev, __func__,
-						urb->actual_length, data);
-
-	if (urb->actual_length) {
-		tty = tty_port_tty_get(&port->port);
-		if (tty) {
-			tty_insert_flip_string(tty, data,
-						urb->actual_length);
-			tty_flip_buffer_push(tty);
-			tty_kref_put(tty);
-		}
-		spin_lock(&priv->lock);
-		if (tty)
-			priv->bytes_in += available_room;
-
-	} else {
-		spin_lock(&priv->lock);
-	}
-
-	/* Continue trying to always read if we should */
-	if (!priv->throttled) {
-		usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-				   usb_rcvbulkpipe(port->serial->dev,
-					   port->bulk_in_endpointAddress),
-				   port->read_urb->transfer_buffer,
-				   port->read_urb->transfer_buffer_length,
-				   visor_read_bulk_callback, port);
-		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-		if (result)
-			dev_err(&port->dev,
-			    "%s - failed resubmitting read urb, error %d\n",
-							__func__, result);
-	} else
-		priv->actually_throttled = 1;
-	spin_unlock(&priv->lock);
 }
 
 static void visor_read_int_callback(struct urb *urb)
@@ -575,41 +336,6 @@ exit:
 							__func__, result);
 }
 
-static void visor_throttle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct visor_private *priv = usb_get_serial_port_data(port);
-
-	dbg("%s - port %d", __func__, port->number);
-	spin_lock_irq(&priv->lock);
-	priv->throttled = 1;
-	spin_unlock_irq(&priv->lock);
-}
-
-
-static void visor_unthrottle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct visor_private *priv = usb_get_serial_port_data(port);
-	int result, was_throttled;
-
-	dbg("%s - port %d", __func__, port->number);
-	spin_lock_irq(&priv->lock);
-	priv->throttled = 0;
-	was_throttled = priv->actually_throttled;
-	priv->actually_throttled = 0;
-	spin_unlock_irq(&priv->lock);
-
-	if (was_throttled) {
-		port->read_urb->dev = port->serial->dev;
-		result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-		if (result)
-			dev_err(&port->dev,
-				"%s - failed submitting read urb, error %d\n",
-							__func__, result);
-	}
-}
-
 static int palm_os_3_probe(struct usb_serial *serial,
 						const struct usb_device_id *id)
 {
@@ -777,28 +503,6 @@ static int visor_calc_num_ports(struct usb_serial *serial)
 	return num_ports;
 }
 
-static int generic_startup(struct usb_serial *serial)
-{
-	struct usb_serial_port **ports = serial->port;
-	struct visor_private *priv;
-	int i;
-
-	for (i = 0; i < serial->num_ports; ++i) {
-		priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-		if (!priv) {
-			while (i-- != 0) {
-				priv = usb_get_serial_port_data(ports[i]);
-				usb_set_serial_port_data(ports[i], NULL);
-				kfree(priv);
-			}
-			return -ENOMEM;
-		}
-		spin_lock_init(&priv->lock);
-		usb_set_serial_port_data(ports[i], priv);
-	}
-	return 0;
-}
-
 static int clie_3_5_startup(struct usb_serial *serial)
 {
 	struct device *dev = &serial->dev->dev;
@@ -849,7 +553,7 @@ static int clie_3_5_startup(struct usb_serial *serial)
 		goto out;
 	}
 
-	result = generic_startup(serial);
+	result = 0;
 out:
 	kfree(data);
 
@@ -867,7 +571,7 @@ static int treo_attach(struct usb_serial *serial)
 		(le16_to_cpu(serial->dev->descriptor.idVendor)
 						== KYOCERA_VENDOR_ID)) ||
 		(serial->num_interrupt_in == 0))
-		goto generic_startup;
+		return 0;
 
 	dbg("%s", __func__);
 
@@ -897,8 +601,7 @@ static int treo_attach(struct usb_serial *serial)
 	COPY_PORT(serial->port[1], swap_port);
 	kfree(swap_port);
 
-generic_startup:
-	return generic_startup(serial);
+	return 0;
 }
 
 static int clie_5_attach(struct usb_serial *serial)
@@ -921,20 +624,7 @@ static int clie_5_attach(struct usb_serial *serial)
 	serial->port[0]->bulk_out_endpointAddress =
 				serial->port[1]->bulk_out_endpointAddress;
 
-	return generic_startup(serial);
-}
-
-static void visor_release(struct usb_serial *serial)
-{
-	struct visor_private *priv;
-	int i;
-
-	dbg("%s", __func__);
-
-	for (i = 0; i < serial->num_ports; i++) {
-		priv = usb_get_serial_port_data(serial->port[i]);
-		kfree(priv);
-	}
+	return 0;
 }
 
 static int __init visor_init(void)
@@ -1018,8 +708,6 @@ MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
-module_param(stats, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(stats, "Enables statistics or not");
 
 module_param(vendor, ushort, 0);
 MODULE_PARM_DESC(vendor, "User specified vendor ID");
diff --git a/drivers/usb/serial/visor.h b/drivers/usb/serial/visor.h
index 57229cf6647..88db4d06aef 100644
--- a/drivers/usb/serial/visor.h
+++ b/drivers/usb/serial/visor.h
@@ -9,8 +9,9 @@
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
  *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
- * 
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver.
+ *
  */
 
 #ifndef __LINUX_USB_SERIAL_VISOR_H
@@ -65,7 +66,7 @@
 #define ACEECA_MEZ1000_ID		0x0001
 
 #define KYOCERA_VENDOR_ID		0x0C88
-#define KYOCERA_7135_ID			0x0021 
+#define KYOCERA_7135_ID			0x0021
 
 #define FOSSIL_VENDOR_ID		0x0E67
 #define FOSSIL_ABACUS_ID		0x0002
@@ -145,7 +146,7 @@ struct visor_connection_info {
  * The maximum number of connections currently supported is 2
  */
 struct palm_ext_connection_info {
-	__u8 num_ports;		
+	__u8 num_ports;
 	__u8 endpoint_numbers_different;
 	__le16 reserved1;
 	struct {
diff --git a/drivers/usb/serial/zio.c b/drivers/usb/serial/zio.c
new file mode 100644
index 00000000000..f5796727883
--- /dev/null
+++ b/drivers/usb/serial/zio.c
@@ -0,0 +1,64 @@
+/*
+ * ZIO Motherboard USB driver
+ *
+ * Copyright (C) 2010 Zilogic Systems <code@zilogic.com>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License version
+ *	2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(0x1CBE, 0x0103) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver zio_driver = {
+	.name =		"zio",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	id_table,
+	.no_dynamic_id =	1,
+};
+
+static struct usb_serial_driver zio_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"zio",
+	},
+	.id_table =		id_table,
+	.usb_driver =		&zio_driver,
+	.num_ports =		1,
+};
+
+static int __init zio_init(void)
+{
+	int retval;
+
+	retval = usb_serial_register(&zio_device);
+	if (retval)
+		return retval;
+	retval = usb_register(&zio_driver);
+	if (retval)
+		usb_serial_deregister(&zio_device);
+	return retval;
+}
+
+static void __exit zio_exit(void)
+{
+	usb_deregister(&zio_driver);
+	usb_serial_deregister(&zio_device);
+}
+
+module_init(zio_init);
+module_exit(zio_exit);
+MODULE_LICENSE("GPL");