Merge tag 'usb-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.10 merge window

Here is the big Gadget & PHY pull request. Many of us have
been really busy lately getting multiple drivers to a better
position.

Since this pull request is so large, I will divide it in sections
so it's easier to grasp what's included.

- cleanups:
	. UDC drivers no longer touch gadget->dev, that's now udc-core
		responsibility
	. Many more UDC drivers converted to usb_gadget_map/unmap_request()
	. UDC drivers no longer initialize DMA-related fields from gadget's
		device structure
	. UDC drivers don't touch gadget.dev.driver directly
	. UDC drivers don't assign gadget.dev.release directly
	. Removal of some unused DMA_ADDR_INVALID
	. Introduction of CONFIG_USB_PHY
	. All phy drivers have been moved to drivers/usb/phy and renamed to
		a common naming scheme
	. Fix PHY layer so it never returns a NULL pointer, also fix all
		callers to avoid using IS_ERR_OR_NULL()
	. Sparse fixes all over the place
	. drivers/usb/otg/ has been deleted
	. Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock
		usage

- new features:
	. UDC core now provides a generic way for tracking and reporting
		UDC's state (not attached, resuming, suspended, addressed,
		default, etc)
	. twl4030-usb learned that it shouldn't be enabled during init
	. Full DT support for DWC3 has been implemented
	. ab8500-usb learned about pinctrl framework
	. nop PHY learned about DeviceTree and regulators
	. DWC3 learned about suspend/resume
	. DWC3 can now be compiled in host-only and gadget-only (as well as
		DRD) configurations
	. UVC now enables streaming endpoint based on negotiated speed
	. isp1301 now implements the PHY API properly
	. configfs-based interface for gadget drivers which will lead to
		the removal of all code which just combines functions together
		to build functional gadget drivers.
	. f_serial and f_obex were converted to new configfs interface while
		maintaining old interface around.

- non-critical fixes:
	. UVC gadget driver got fixes for Endpoint usage and stream calculation
	. ab8500-usb fixed unbalanced clock and regulator API usage
	. twl4030-usb got a fix for when OMAP3 is booted with cable connected
	. fusb300_udc got a fix for DMA usage
	. UVC got fixes for two assertions of the USB Video Class Compliance
		specification revision 1.1
	. build warning issues caused by recent addition of __must_check to
		regulator API

These are all changes which deserve a mention, all other changes are related
to these one or minor spelling fixes and other similar tasks.

Signed-of-by: Felipe Balbi <balbi@ti.com>

16 files changed, 349 insertions, 246 deletions

diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 05e51432dd2..47442d35b6f 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -7,7 +7,6 @@
 config USB_MUSB_HDRC
 	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 	depends on USB && USB_GADGET
-	select USB_OTG_UTILS
 	help
 	  Say Y here if your system has a dual role high speed USB
 	  controller based on the Mentor Graphics silicon IP.  Then
@@ -34,10 +33,12 @@ choice
 config USB_MUSB_DAVINCI
 	tristate "DaVinci"
 	depends on ARCH_DAVINCI_DMx
+	depends on BROKEN
 
 config USB_MUSB_DA8XX
 	tristate "DA8xx/OMAP-L1x"
 	depends on ARCH_DAVINCI_DA8XX
+	depends on BROKEN
 
 config USB_MUSB_TUSB6010
 	tristate "TUSB6010"
@@ -53,7 +54,6 @@ config USB_MUSB_AM35X
 
 config USB_MUSB_DSPS
 	tristate "TI DSPS platforms"
-	depends on SOC_TI81XX || SOC_AM33XX
 
 config USB_MUSB_BLACKFIN
 	tristate "Blackfin"
@@ -61,12 +61,12 @@ config USB_MUSB_BLACKFIN
 
 config USB_MUSB_UX500
 	tristate "U8500 and U5500"
-	depends on (ARCH_U8500 && AB8500_USB)
 
 endchoice
 
 choice
 	prompt 'MUSB DMA mode'
+	default MUSB_PIO_ONLY if ARCH_MULTIPLATFORM
 	default USB_UX500_DMA if USB_MUSB_UX500
 	default USB_INVENTRA_DMA if USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
 	default USB_TI_CPPI_DMA if USB_MUSB_DAVINCI
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index 59eea219034..2231850c062 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -149,7 +149,7 @@ static void otg_timer(unsigned long _musb)
 	 */
 	devctl = musb_readb(mregs, MUSB_DEVCTL);
 	dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
-		otg_state_string(musb->xceiv->state));
+		usb_otg_state_string(musb->xceiv->state));
 
 	spin_lock_irqsave(&musb->lock, flags);
 	switch (musb->xceiv->state) {
@@ -195,7 +195,7 @@ static void am35x_musb_try_idle(struct musb *musb, unsigned long timeout)
 	if (musb->is_active || (musb->a_wait_bcon == 0 &&
 				musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
 		dev_dbg(musb->controller, "%s active, deleting timer\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state));
 		del_timer(&otg_workaround);
 		last_timer = jiffies;
 		return;
@@ -208,7 +208,7 @@ static void am35x_musb_try_idle(struct musb *musb, unsigned long timeout)
 	last_timer = timeout;
 
 	dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
-		otg_state_string(musb->xceiv->state),
+		usb_otg_state_string(musb->xceiv->state),
 		jiffies_to_msecs(timeout - jiffies));
 	mod_timer(&otg_workaround, timeout);
 }
@@ -298,7 +298,7 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci)
 		/* NOTE: this must complete power-on within 100 ms. */
 		dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
 				drvvbus ? "on" : "off",
-				otg_state_string(musb->xceiv->state),
+				usb_otg_state_string(musb->xceiv->state),
 				err ? " ERROR" : "",
 				devctl);
 		ret = IRQ_HANDLED;
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index dbb31b30c7f..5e63b160db0 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -280,13 +280,13 @@ static void musb_conn_timer_handler(unsigned long _musb)
 		break;
 	default:
 		dev_dbg(musb->controller, "%s state not handled\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state));
 		break;
 	}
 	spin_unlock_irqrestore(&musb->lock, flags);
 
 	dev_dbg(musb->controller, "state is %s\n",
-		otg_state_string(musb->xceiv->state));
+		usb_otg_state_string(musb->xceiv->state));
 }
 
 static void bfin_musb_enable(struct musb *musb)
@@ -307,7 +307,7 @@ static void bfin_musb_set_vbus(struct musb *musb, int is_on)
 
 	dev_dbg(musb->controller, "VBUS %s, devctl %02x "
 		/* otg %3x conf %08x prcm %08x */ "\n",
-		otg_state_string(musb->xceiv->state),
+		usb_otg_state_string(musb->xceiv->state),
 		musb_readb(musb->mregs, MUSB_DEVCTL));
 }
 
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index f522000e8f0..9db211ee15b 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -435,7 +435,6 @@ cppi_rndis_update(struct cppi_channel *c, int is_rx,
 	}
 }
 
-#ifdef CONFIG_USB_MUSB_DEBUG
 static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd)
 {
 	pr_debug("RXBD/%s %08x: "
@@ -444,21 +443,16 @@ static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd)
 			bd->hw_next, bd->hw_bufp, bd->hw_off_len,
 			bd->hw_options);
 }
-#endif
 
 static void cppi_dump_rxq(int level, const char *tag, struct cppi_channel *rx)
 {
-#ifdef CONFIG_USB_MUSB_DEBUG
 	struct cppi_descriptor	*bd;
 
-	if (!_dbg_level(level))
-		return;
 	cppi_dump_rx(level, rx, tag);
 	if (rx->last_processed)
 		cppi_dump_rxbd("last", rx->last_processed);
 	for (bd = rx->head; bd; bd = bd->next)
 		cppi_dump_rxbd("active", bd);
-#endif
 }
 
 
@@ -784,6 +778,7 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
 	void __iomem		*tibase = musb->ctrl_base;
 	int			is_rndis = 0;
 	struct cppi_rx_stateram	__iomem *rx_ram = rx->state_ram;
+	struct cppi_descriptor	*d;
 
 	if (onepacket) {
 		/* almost every USB driver, host or peripheral side */
@@ -897,14 +892,8 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
 	bd->hw_options |= CPPI_SOP_SET;
 	tail->hw_options |= CPPI_EOP_SET;
 
-#ifdef CONFIG_USB_MUSB_DEBUG
-	if (_dbg_level(5)) {
-		struct cppi_descriptor	*d;
-
-		for (d = rx->head; d; d = d->next)
-			cppi_dump_rxbd("S", d);
-	}
-#endif
+	for (d = rx->head; d; d = d->next)
+		cppi_dump_rxbd("S", d);
 
 	/* in case the preceding transfer left some state... */
 	tail = rx->last_processed;
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 41613a2b35e..b903b744a22 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -198,7 +198,7 @@ static void otg_timer(unsigned long _musb)
 	 */
 	devctl = musb_readb(mregs, MUSB_DEVCTL);
 	dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
-		otg_state_string(musb->xceiv->state));
+		usb_otg_state_string(musb->xceiv->state));
 
 	spin_lock_irqsave(&musb->lock, flags);
 	switch (musb->xceiv->state) {
@@ -267,7 +267,7 @@ static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout)
 	if (musb->is_active || (musb->a_wait_bcon == 0 &&
 				musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
 		dev_dbg(musb->controller, "%s active, deleting timer\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state));
 		del_timer(&otg_workaround);
 		last_timer = jiffies;
 		return;
@@ -280,7 +280,7 @@ static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout)
 	last_timer = timeout;
 
 	dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
-		otg_state_string(musb->xceiv->state),
+		usb_otg_state_string(musb->xceiv->state),
 		jiffies_to_msecs(timeout - jiffies));
 	mod_timer(&otg_workaround, timeout);
 }
@@ -360,7 +360,7 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
 
 		dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
 				drvvbus ? "on" : "off",
-				otg_state_string(musb->xceiv->state),
+				usb_otg_state_string(musb->xceiv->state),
 				err ? " ERROR" : "",
 				devctl);
 		ret = IRQ_HANDLED;
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index e040d910373..bea6cc35471 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -215,7 +215,7 @@ static void otg_timer(unsigned long _musb)
 	 */
 	devctl = musb_readb(mregs, MUSB_DEVCTL);
 	dev_dbg(musb->controller, "poll devctl %02x (%s)\n", devctl,
-		otg_state_string(musb->xceiv->state));
+		usb_otg_state_string(musb->xceiv->state));
 
 	spin_lock_irqsave(&musb->lock, flags);
 	switch (musb->xceiv->state) {
@@ -349,7 +349,7 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci)
 		davinci_musb_source_power(musb, drvvbus, 0);
 		dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
 				drvvbus ? "on" : "off",
-				otg_state_string(musb->xceiv->state),
+				usb_otg_state_string(musb->xceiv->state),
 				err ? " ERROR" : "",
 				devctl);
 		retval = IRQ_HANDLED;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index daec6e0f7e3..37a261a6bb6 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -372,13 +372,13 @@ static void musb_otg_timer_func(unsigned long data)
 	case OTG_STATE_A_SUSPEND:
 	case OTG_STATE_A_WAIT_BCON:
 		dev_dbg(musb->controller, "HNP: %s timeout\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state));
 		musb_platform_set_vbus(musb, 0);
 		musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
 		break;
 	default:
 		dev_dbg(musb->controller, "HNP: Unhandled mode %s\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state));
 	}
 	musb->ignore_disconnect = 0;
 	spin_unlock_irqrestore(&musb->lock, flags);
@@ -393,13 +393,14 @@ void musb_hnp_stop(struct musb *musb)
 	void __iomem	*mbase = musb->mregs;
 	u8	reg;
 
-	dev_dbg(musb->controller, "HNP: stop from %s\n", otg_state_string(musb->xceiv->state));
+	dev_dbg(musb->controller, "HNP: stop from %s\n",
+			usb_otg_state_string(musb->xceiv->state));
 
 	switch (musb->xceiv->state) {
 	case OTG_STATE_A_PERIPHERAL:
 		musb_g_disconnect(musb);
 		dev_dbg(musb->controller, "HNP: back to %s\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state));
 		break;
 	case OTG_STATE_B_HOST:
 		dev_dbg(musb->controller, "HNP: Disabling HR\n");
@@ -413,7 +414,7 @@ void musb_hnp_stop(struct musb *musb)
 		break;
 	default:
 		dev_dbg(musb->controller, "HNP: Stopping in unknown state %s\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state));
 	}
 
 	/*
@@ -451,7 +452,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 	 */
 	if (int_usb & MUSB_INTR_RESUME) {
 		handled = IRQ_HANDLED;
-		dev_dbg(musb->controller, "RESUME (%s)\n", otg_state_string(musb->xceiv->state));
+		dev_dbg(musb->controller, "RESUME (%s)\n", usb_otg_state_string(musb->xceiv->state));
 
 		if (devctl & MUSB_DEVCTL_HM) {
 			void __iomem *mbase = musb->mregs;
@@ -493,7 +494,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 			default:
 				WARNING("bogus %s RESUME (%s)\n",
 					"host",
-					otg_state_string(musb->xceiv->state));
+					usb_otg_state_string(musb->xceiv->state));
 			}
 		} else {
 			switch (musb->xceiv->state) {
@@ -522,7 +523,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 			default:
 				WARNING("bogus %s RESUME (%s)\n",
 					"peripheral",
-					otg_state_string(musb->xceiv->state));
+					usb_otg_state_string(musb->xceiv->state));
 			}
 		}
 	}
@@ -538,7 +539,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 		}
 
 		dev_dbg(musb->controller, "SESSION_REQUEST (%s)\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state));
 
 		/* IRQ arrives from ID pin sense or (later, if VBUS power
 		 * is removed) SRP.  responses are time critical:
@@ -602,8 +603,9 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 			break;
 		}
 
-		dev_dbg(musb->controller, "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n",
-				otg_state_string(musb->xceiv->state),
+		dev_printk(ignore ? KERN_DEBUG : KERN_ERR, musb->controller,
+				"VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n",
+				usb_otg_state_string(musb->xceiv->state),
 				devctl,
 				({ char *s;
 				switch (devctl & MUSB_DEVCTL_VBUS) {
@@ -628,7 +630,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 
 	if (int_usb & MUSB_INTR_SUSPEND) {
 		dev_dbg(musb->controller, "SUSPEND (%s) devctl %02x\n",
-			otg_state_string(musb->xceiv->state), devctl);
+			usb_otg_state_string(musb->xceiv->state), devctl);
 		handled = IRQ_HANDLED;
 
 		switch (musb->xceiv->state) {
@@ -745,12 +747,12 @@ b_host:
 			usb_hcd_resume_root_hub(hcd);
 
 		dev_dbg(musb->controller, "CONNECT (%s) devctl %02x\n",
-				otg_state_string(musb->xceiv->state), devctl);
+				usb_otg_state_string(musb->xceiv->state), devctl);
 	}
 
 	if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) {
 		dev_dbg(musb->controller, "DISCONNECT (%s) as %s, devctl %02x\n",
-				otg_state_string(musb->xceiv->state),
+				usb_otg_state_string(musb->xceiv->state),
 				MUSB_MODE(musb), devctl);
 		handled = IRQ_HANDLED;
 
@@ -787,7 +789,7 @@ b_host:
 			break;
 		default:
 			WARNING("unhandled DISCONNECT transition (%s)\n",
-				otg_state_string(musb->xceiv->state));
+				usb_otg_state_string(musb->xceiv->state));
 			break;
 		}
 	}
@@ -813,7 +815,7 @@ b_host:
 			}
 		} else {
 			dev_dbg(musb->controller, "BUS RESET as %s\n",
-				otg_state_string(musb->xceiv->state));
+				usb_otg_state_string(musb->xceiv->state));
 			switch (musb->xceiv->state) {
 			case OTG_STATE_A_SUSPEND:
 				/* We need to ignore disconnect on suspend
@@ -826,7 +828,7 @@ b_host:
 			case OTG_STATE_A_WAIT_BCON:	/* OPT TD.4.7-900ms */
 				/* never use invalid T(a_wait_bcon) */
 				dev_dbg(musb->controller, "HNP: in %s, %d msec timeout\n",
-					otg_state_string(musb->xceiv->state),
+					usb_otg_state_string(musb->xceiv->state),
 					TA_WAIT_BCON(musb));
 				mod_timer(&musb->otg_timer, jiffies
 					+ msecs_to_jiffies(TA_WAIT_BCON(musb)));
@@ -838,7 +840,7 @@ b_host:
 				break;
 			case OTG_STATE_B_WAIT_ACON:
 				dev_dbg(musb->controller, "HNP: RESET (%s), to b_peripheral\n",
-					otg_state_string(musb->xceiv->state));
+					usb_otg_state_string(musb->xceiv->state));
 				musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 				musb_g_reset(musb);
 				break;
@@ -850,7 +852,7 @@ b_host:
 				break;
 			default:
 				dev_dbg(musb->controller, "Unhandled BUS RESET as %s\n",
-					otg_state_string(musb->xceiv->state));
+					usb_otg_state_string(musb->xceiv->state));
 			}
 		}
 	}
@@ -1632,7 +1634,7 @@ musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf)
 	int ret = -EINVAL;
 
 	spin_lock_irqsave(&musb->lock, flags);
-	ret = sprintf(buf, "%s\n", otg_state_string(musb->xceiv->state));
+	ret = sprintf(buf, "%s\n", usb_otg_state_string(musb->xceiv->state));
 	spin_unlock_irqrestore(&musb->lock, flags);
 
 	return ret;
@@ -1951,9 +1953,13 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 		musb_write_ulpi_buscontrol(musb->mregs, busctl);
 	}
 
-	MUSB_DEV_MODE(musb);
-	musb->xceiv->otg->default_a = 0;
-	musb->xceiv->state = OTG_STATE_B_IDLE;
+	if (musb->xceiv->otg->default_a) {
+		MUSB_HST_MODE(musb);
+		musb->xceiv->state = OTG_STATE_A_IDLE;
+	} else {
+		MUSB_DEV_MODE(musb);
+		musb->xceiv->state = OTG_STATE_B_IDLE;
+	}
 
 	status = musb_gadget_setup(musb);
 
@@ -2008,7 +2014,6 @@ static int musb_probe(struct platform_device *pdev)
 {
 	struct device	*dev = &pdev->dev;
 	int		irq = platform_get_irq_byname(pdev, "mc");
-	int		status;
 	struct resource	*iomem;
 	void __iomem	*base;
 
@@ -2016,24 +2021,17 @@ static int musb_probe(struct platform_device *pdev)
 	if (!iomem || irq <= 0)
 		return -ENODEV;
 
-	base = ioremap(iomem->start, resource_size(iomem));
-	if (!base) {
-		dev_err(dev, "ioremap failed\n");
-		return -ENOMEM;
-	}
+	base = devm_ioremap_resource(dev, iomem);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
 
-	status = musb_init_controller(dev, irq, base);
-	if (status < 0)
-		iounmap(base);
-
-	return status;
+	return musb_init_controller(dev, irq, base);
 }
 
 static int musb_remove(struct platform_device *pdev)
 {
 	struct device	*dev = &pdev->dev;
 	struct musb	*musb = dev_to_musb(dev);
-	void __iomem	*ctrl_base = musb->ctrl_base;
 
 	/* this gets called on rmmod.
 	 *  - Host mode: host may still be active
@@ -2044,7 +2042,6 @@ static int musb_remove(struct platform_device *pdev)
 	musb_shutdown(pdev);
 
 	musb_free(musb);
-	iounmap(ctrl_base);
 	device_init_wakeup(dev, 0);
 #ifndef CONFIG_MUSB_PIO_ONLY
 	dma_set_mask(dev, *dev->parent->dma_mask);
@@ -2293,8 +2290,6 @@ static int __init musb_init(void)
 	if (usb_disabled())
 		return 0;
 
-	pr_info("%s: version " MUSB_VERSION ", ?dma?, otg (peripheral+host)\n",
-		musb_driver_name);
 	return platform_driver_register(&musb_driver);
 }
 module_init(musb_init);
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 6bb89715b63..3a18e44e939 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -38,6 +38,7 @@
 #include <linux/module.h>
 #include <linux/usb/nop-usb-xceiv.h>
 #include <linux/platform_data/usb-omap.h>
+#include <linux/sizes.h>
 
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -224,7 +225,7 @@ static void otg_timer(unsigned long _musb)
 	 */
 	devctl = dsps_readb(mregs, MUSB_DEVCTL);
 	dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
-				otg_state_string(musb->xceiv->state));
+				usb_otg_state_string(musb->xceiv->state));
 
 	spin_lock_irqsave(&musb->lock, flags);
 	switch (musb->xceiv->state) {
@@ -273,7 +274,7 @@ static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout)
 	if (musb->is_active || (musb->a_wait_bcon == 0 &&
 				musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
 		dev_dbg(musb->controller, "%s active, deleting timer\n",
-				otg_state_string(musb->xceiv->state));
+				usb_otg_state_string(musb->xceiv->state));
 		del_timer(&glue->timer[pdev->id]);
 		glue->last_timer[pdev->id] = jiffies;
 		return;
@@ -288,7 +289,7 @@ static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout)
 	glue->last_timer[pdev->id] = timeout;
 
 	dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
-		otg_state_string(musb->xceiv->state),
+		usb_otg_state_string(musb->xceiv->state),
 			jiffies_to_msecs(timeout - jiffies));
 	mod_timer(&glue->timer[pdev->id], timeout);
 }
@@ -334,7 +335,7 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
 	 * value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set.
 	 * Also, DRVVBUS pulses for SRP (but not at 5V) ...
 	 */
-	if (usbintr & MUSB_INTR_BABBLE)
+	if (is_host_active(musb) && usbintr & MUSB_INTR_BABBLE)
 		pr_info("CAUTION: musb: Babble Interrupt Occurred\n");
 
 	if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) {
@@ -377,7 +378,7 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
 		/* NOTE: this must complete power-on within 100 ms. */
 		dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
 				drvvbus ? "on" : "off",
-				otg_state_string(musb->xceiv->state),
+				usb_otg_state_string(musb->xceiv->state),
 				err ? " ERROR" : "",
 				devctl);
 		ret = IRQ_HANDLED;
@@ -596,14 +597,13 @@ err0:
 
 static int dsps_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
 	const struct of_device_id *match;
 	const struct dsps_musb_wrapper *wrp;
 	struct dsps_glue *glue;
 	struct resource *iomem;
 	int ret, i;
 
-	match = of_match_node(musb_dsps_of_match, np);
+	match = of_match_node(musb_dsps_of_match, pdev->dev.of_node);
 	if (!match) {
 		dev_err(&pdev->dev, "fail to get matching of_match struct\n");
 		ret = -EINVAL;
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 83eddedcd9b..ba7092349fa 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -46,48 +46,6 @@
 #include "musb_core.h"
 
 
-/* MUSB PERIPHERAL status 3-mar-2006:
- *
- * - EP0 seems solid.  It passes both USBCV and usbtest control cases.
- *   Minor glitches:
- *
- *     + remote wakeup to Linux hosts work, but saw USBCV failures;
- *       in one test run (operator error?)
- *     + endpoint halt tests -- in both usbtest and usbcv -- seem
- *       to break when dma is enabled ... is something wrongly
- *       clearing SENDSTALL?
- *
- * - Mass storage behaved ok when last tested.  Network traffic patterns
- *   (with lots of short transfers etc) need retesting; they turn up the
- *   worst cases of the DMA, since short packets are typical but are not
- *   required.
- *
- * - TX/IN
- *     + both pio and dma behave in with network and g_zero tests
- *     + no cppi throughput issues other than no-hw-queueing
- *     + failed with FLAT_REG (DaVinci)
- *     + seems to behave with double buffering, PIO -and- CPPI
- *     + with gadgetfs + AIO, requests got lost?
- *
- * - RX/OUT
- *     + both pio and dma behave in with network and g_zero tests
- *     + dma is slow in typical case (short_not_ok is clear)
- *     + double buffering ok with PIO
- *     + double buffering *FAILS* with CPPI, wrong data bytes sometimes
- *     + request lossage observed with gadgetfs
- *
- * - ISO not tested ... might work, but only weakly isochronous
- *
- * - Gadget driver disabling of softconnect during bind() is ignored; so
- *   drivers can't hold off host requests until userspace is ready.
- *   (Workaround:  they can turn it off later.)
- *
- * - PORTABILITY (assumes PIO works):
- *     + DaVinci, basically works with cppi dma
- *     + OMAP 2430, ditto with mentor dma
- *     + TUSB 6010, platform-specific dma in the works
- */
-
 /* ----------------------------------------------------------------------- */
 
 #define is_buffer_mapped(req) (is_dma_capable() && \
@@ -280,41 +238,6 @@ static inline int max_ep_writesize(struct musb *musb, struct musb_ep *ep)
 		return ep->packet_sz;
 }
 
-
-#ifdef CONFIG_USB_INVENTRA_DMA
-
-/* Peripheral tx (IN) using Mentor DMA works as follows:
-	Only mode 0 is used for transfers <= wPktSize,
-	mode 1 is used for larger transfers,
-
-	One of the following happens:
-	- Host sends IN token which causes an endpoint interrupt
-		-> TxAvail
-			-> if DMA is currently busy, exit.
-			-> if queue is non-empty, txstate().
-
-	- Request is queued by the gadget driver.
-		-> if queue was previously empty, txstate()
-
-	txstate()
-		-> start
-		  /\	-> setup DMA
-		  |     (data is transferred to the FIFO, then sent out when
-		  |	IN token(s) are recd from Host.
-		  |		-> DMA interrupt on completion
-		  |		   calls TxAvail.
-		  |		      -> stop DMA, ~DMAENAB,
-		  |		      -> set TxPktRdy for last short pkt or zlp
-		  |		      -> Complete Request
-		  |		      -> Continue next request (call txstate)
-		  |___________________________________|
-
- * Non-Mentor DMA engines can of course work differently, such as by
- * upleveling from irq-per-packet to irq-per-buffer.
- */
-
-#endif
-
 /*
  * An endpoint is transmitting data. This can be called either from
  * the IRQ routine or from ep.queue() to kickstart a request on an
@@ -621,37 +544,6 @@ void musb_g_tx(struct musb *musb, u8 epnum)
 
 /* ------------------------------------------------------------ */
 
-#ifdef CONFIG_USB_INVENTRA_DMA
-
-/* Peripheral rx (OUT) using Mentor DMA works as follows:
-	- Only mode 0 is used.
-
-	- Request is queued by the gadget class driver.
-		-> if queue was previously empty, rxstate()
-
-	- Host sends OUT token which causes an endpoint interrupt
-	  /\      -> RxReady
-	  |	      -> if request queued, call rxstate
-	  |		/\	-> setup DMA
-	  |		|	     -> DMA interrupt on completion
-	  |		|		-> RxReady
-	  |		|		      -> stop DMA
-	  |		|		      -> ack the read
-	  |		|		      -> if data recd = max expected
-	  |		|				by the request, or host
-	  |		|				sent a short packet,
-	  |		|				complete the request,
-	  |		|				and start the next one.
-	  |		|_____________________________________|
-	  |					 else just wait for the host
-	  |					    to send the next OUT token.
-	  |__________________________________________________|
-
- * Non-Mentor DMA engines can of course work differently.
- */
-
-#endif
-
 /*
  * Context: controller locked, IRQs blocked, endpoint selected
  */
@@ -740,7 +632,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 				struct dma_controller	*c;
 				struct dma_channel	*channel;
 				int			use_dma = 0;
-				int transfer_size;
+				unsigned int transfer_size;
 
 				c = musb->dma_controller;
 				channel = musb_ep->dma;
@@ -782,10 +674,11 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 						csr | MUSB_RXCSR_DMAMODE);
 					musb_writew(epio, MUSB_RXCSR, csr);
 
-					transfer_size = min(request->length - request->actual,
+					transfer_size = min_t(unsigned int,
+							request->length -
+							request->actual,
 							channel->max_len);
 					musb_ep->dma->desired_mode = 1;
-
 				} else {
 					if (!musb_ep->hb_mult &&
 						musb_ep->hw_ep->rx_double_buffered)
@@ -815,7 +708,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 
 				struct dma_controller *c;
 				struct dma_channel *channel;
-				int transfer_size = 0;
+				unsigned int transfer_size = 0;
 
 				c = musb->dma_controller;
 				channel = musb_ep->dma;
@@ -824,11 +717,13 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 				if (fifo_count < musb_ep->packet_sz)
 					transfer_size = fifo_count;
 				else if (request->short_not_ok)
-					transfer_size =	min(request->length -
+					transfer_size =	min_t(unsigned int,
+							request->length -
 							request->actual,
 							channel->max_len);
 				else
-					transfer_size = min(request->length -
+					transfer_size = min_t(unsigned int,
+							request->length -
 							request->actual,
 							(unsigned)fifo_count);
 
@@ -1681,7 +1576,7 @@ static int musb_gadget_wakeup(struct usb_gadget *gadget)
 		goto done;
 	default:
 		dev_dbg(musb->controller, "Unhandled wake: %s\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state));
 		goto done;
 	}
 
@@ -1801,13 +1696,6 @@ static const struct usb_gadget_ops musb_gadget_operations = {
  * all peripheral ports are external...
  */
 
-static void musb_gadget_release(struct device *dev)
-{
-	/* kref_put(WHAT) */
-	dev_dbg(dev, "%s\n", __func__);
-}
-
-
 static void
 init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
 {
@@ -1892,12 +1780,7 @@ int musb_gadget_setup(struct musb *musb)
 	musb->g.speed = USB_SPEED_UNKNOWN;
 
 	/* this "gadget" abstracts/virtualizes the controller */
-	dev_set_name(&musb->g.dev, "gadget");
-	musb->g.dev.parent = musb->controller;
-	musb->g.dev.dma_mask = musb->controller->dma_mask;
-	musb->g.dev.release = musb_gadget_release;
 	musb->g.name = musb_driver_name;
-
 	musb->g.is_otg = 1;
 
 	musb_g_init_endpoints(musb);
@@ -1905,11 +1788,6 @@ int musb_gadget_setup(struct musb *musb)
 	musb->is_active = 0;
 	musb_platform_try_idle(musb, 0);
 
-	status = device_register(&musb->g.dev);
-	if (status != 0) {
-		put_device(&musb->g.dev);
-		return status;
-	}
 	status = usb_add_gadget_udc(musb->controller, &musb->g);
 	if (status)
 		goto err;
@@ -1924,8 +1802,6 @@ err:
 void musb_gadget_cleanup(struct musb *musb)
 {
 	usb_del_gadget_udc(&musb->g);
-	if (musb->g.dev.parent)
-		device_unregister(&musb->g.dev);
 }
 
 /*
@@ -1977,9 +1853,8 @@ static int musb_gadget_start(struct usb_gadget *g,
 		goto err;
 	}
 
-	if ((musb->xceiv->last_event == USB_EVENT_ID)
-				&& otg->set_vbus)
-		otg_set_vbus(otg, 1);
+	if (musb->xceiv->last_event == USB_EVENT_ID)
+		musb_platform_set_vbus(musb, 1);
 
 	hcd->self.uses_pio_for_control = 1;
 
@@ -2063,6 +1938,7 @@ static int musb_gadget_stop(struct usb_gadget *g,
 	dev_dbg(musb->controller, "unregistering driver %s\n", driver->function);
 
 	musb->is_active = 0;
+	musb->gadget_driver = NULL;
 	musb_platform_try_idle(musb, 0);
 	spin_unlock_irqrestore(&musb->lock, flags);
 
@@ -2099,7 +1975,7 @@ void musb_g_resume(struct musb *musb)
 		break;
 	default:
 		WARNING("unhandled RESUME transition (%s)\n",
-				otg_state_string(musb->xceiv->state));
+				usb_otg_state_string(musb->xceiv->state));
 	}
 }
 
@@ -2129,7 +2005,7 @@ void musb_g_suspend(struct musb *musb)
 		 * A_PERIPHERAL may need care too
 		 */
 		WARNING("unhandled SUSPEND transition (%s)\n",
-				otg_state_string(musb->xceiv->state));
+				usb_otg_state_string(musb->xceiv->state));
 	}
 }
 
@@ -2163,7 +2039,7 @@ void musb_g_disconnect(struct musb *musb)
 	switch (musb->xceiv->state) {
 	default:
 		dev_dbg(musb->controller, "Unhandled disconnect %s, setting a_idle\n",
-			otg_state_string(musb->xceiv->state));
+			usb_otg_state_string(musb->xceiv->state