Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (205 commits)
  USB: EHCI: Remove SPARC_LEON {read,write}_be definitions from ehci.h
  USB: UHCI: Support big endian GRUSBHC HC
  sparc: add {read,write}*_be routines
  USB: UHCI: Add support for big endian descriptors
  USB: UHCI: Use ACCESS_ONCE rather than using a full compiler barrier
  USB: UHCI: Add support for big endian mmio
  usb-storage: Correct adjust_quirks to include latest flags
  usb/isp1760: Fix possible unlink problems
  usb/isp1760: Move function isp1760_endpoint_disable() within file.
  USB: remove remaining usages of hcd->state from usbcore and fix regression
  usb: musb: ux500: add configuration and build options for ux500 dma
  usb: musb: ux500: add dma glue layer for ux500
  usb: musb: ux500: add dma name for ux500
  usb: musb: ux500: add ux500 specific code for gadget side
  usb: musb: fix compile error
  usb-storage: fix up the unusual_realtek device list
  USB: gadget: f_audio: Fix invalid dereference of initdata
  EHCI: don't rescan interrupt QHs needlessly
  OHCI: fix regression caused by nVidia shutdown workaround
  USB: OTG: msm: Free VCCCX regulator even if we can't set the voltage
  ...

1 files changed, 177 insertions, 281 deletions

diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 448b9d1f0e7..fba99b12058 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -48,7 +48,6 @@
 #include <asm/system.h>
 
 #include "uhci-hcd.h"
-#include "pci-quirks.h"
 
 /*
  * Version Information
@@ -94,7 +93,7 @@ static void uhci_get_current_frame_number(struct uhci_hcd *uhci);
 /*
  * Calculate the link pointer DMA value for the first Skeleton QH in a frame.
  */
-static __le32 uhci_frame_skel_link(struct uhci_hcd *uhci, int frame)
+static __hc32 uhci_frame_skel_link(struct uhci_hcd *uhci, int frame)
 {
 	int skelnum;
 
@@ -116,7 +115,7 @@ static __le32 uhci_frame_skel_link(struct uhci_hcd *uhci, int frame)
 	skelnum = 8 - (int) __ffs(frame | UHCI_NUMFRAMES);
 	if (skelnum <= 1)
 		skelnum = 9;
-	return LINK_TO_QH(uhci->skelqh[skelnum]);
+	return LINK_TO_QH(uhci, uhci->skelqh[skelnum]);
 }
 
 #include "uhci-debug.c"
@@ -135,15 +134,12 @@ static void finish_reset(struct uhci_hcd *uhci)
 	 * We have to clear them by hand.
 	 */
 	for (port = 0; port < uhci->rh_numports; ++port)
-		outw(0, uhci->io_addr + USBPORTSC1 + (port * 2));
+		uhci_writew(uhci, 0, USBPORTSC1 + (port * 2));
 
 	uhci->port_c_suspend = uhci->resuming_ports = 0;
 	uhci->rh_state = UHCI_RH_RESET;
 	uhci->is_stopped = UHCI_IS_STOPPED;
-	uhci_to_hcd(uhci)->state = HC_STATE_HALT;
 	clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
-
-	uhci->dead = 0;		/* Full reset resurrects the controller */
 }
 
 /*
@@ -153,7 +149,7 @@ static void finish_reset(struct uhci_hcd *uhci)
 static void uhci_hc_died(struct uhci_hcd *uhci)
 {
 	uhci_get_current_frame_number(uhci);
-	uhci_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr);
+	uhci->reset_hc(uhci);
 	finish_reset(uhci);
 	uhci->dead = 1;
 
@@ -168,97 +164,118 @@ static void uhci_hc_died(struct uhci_hcd *uhci)
  */
 static void check_and_reset_hc(struct uhci_hcd *uhci)
 {
-	if (uhci_check_and_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr))
+	if (uhci->check_and_reset_hc(uhci))
 		finish_reset(uhci);
 }
 
+#if defined(CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC)
+/*
+ * The two functions below are generic reset functions that are used on systems
+ * that do not have keyboard and mouse legacy support. We assume that we are
+ * running on such a system if CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC is defined.
+ */
+
+/*
+ * Make sure the controller is completely inactive, unable to
+ * generate interrupts or do DMA.
+ */
+static void uhci_generic_reset_hc(struct uhci_hcd *uhci)
+{
+	/* Reset the HC - this will force us to get a
+	 * new notification of any already connected
+	 * ports due to the virtual disconnect that it
+	 * implies.
+	 */
+	uhci_writew(uhci, USBCMD_HCRESET, USBCMD);
+	mb();
+	udelay(5);
+	if (uhci_readw(uhci, USBCMD) & USBCMD_HCRESET)
+		dev_warn(uhci_dev(uhci), "HCRESET not completed yet!\n");
+
+	/* Just to be safe, disable interrupt requests and
+	 * make sure the controller is stopped.
+	 */
+	uhci_writew(uhci, 0, USBINTR);
+	uhci_writew(uhci, 0, USBCMD);
+}
+
+/*
+ * Initialize a controller that was newly discovered or has just been
+ * resumed.  In either case we can't be sure of its previous state.
+ *
+ * Returns: 1 if the controller was reset, 0 otherwise.
+ */
+static int uhci_generic_check_and_reset_hc(struct uhci_hcd *uhci)
+{
+	unsigned int cmd, intr;
+
+	/*
+	 * When restarting a suspended controller, we expect all the
+	 * settings to be the same as we left them:
+	 *
+	 *	Controller is stopped and configured with EGSM set;
+	 *	No interrupts enabled except possibly Resume Detect.
+	 *
+	 * If any of these conditions are violated we do a complete reset.
+	 */
+
+	cmd = uhci_readw(uhci, USBCMD);
+	if ((cmd & USBCMD_RS) || !(cmd & USBCMD_CF) || !(cmd & USBCMD_EGSM)) {
+		dev_dbg(uhci_dev(uhci), "%s: cmd = 0x%04x\n",
+				__func__, cmd);
+		goto reset_needed;
+	}
+
+	intr = uhci_readw(uhci, USBINTR);
+	if (intr & (~USBINTR_RESUME)) {
+		dev_dbg(uhci_dev(uhci), "%s: intr = 0x%04x\n",
+				__func__, intr);
+		goto reset_needed;
+	}
+	return 0;
+
+reset_needed:
+	dev_dbg(uhci_dev(uhci), "Performing full reset\n");
+	uhci_generic_reset_hc(uhci);
+	return 1;
+}
+#endif /* CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC */
+
 /*
  * Store the basic register settings needed by the controller.
  */
 static void configure_hc(struct uhci_hcd *uhci)
 {
-	struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci));
-
 	/* Set the frame length to the default: 1 ms exactly */
-	outb(USBSOF_DEFAULT, uhci->io_addr + USBSOF);
+	uhci_writeb(uhci, USBSOF_DEFAULT, USBSOF);
 
 	/* Store the frame list base address */
-	outl(uhci->frame_dma_handle, uhci->io_addr + USBFLBASEADD);
+	uhci_writel(uhci, uhci->frame_dma_handle, USBFLBASEADD);
 
 	/* Set the current frame number */
-	outw(uhci->frame_number & UHCI_MAX_SOF_NUMBER,
-			uhci->io_addr + USBFRNUM);
-
-	/* Mark controller as not halted before we enable interrupts */
-	uhci_to_hcd(uhci)->state = HC_STATE_SUSPENDED;
-	mb();
-
-	/* Enable PIRQ */
-	pci_write_config_word(pdev, USBLEGSUP, USBLEGSUP_DEFAULT);
+	uhci_writew(uhci, uhci->frame_number & UHCI_MAX_SOF_NUMBER,
+			USBFRNUM);
 
-	/* Disable platform-specific non-PME# wakeup */
-	if (pdev->vendor == PCI_VENDOR_ID_INTEL)
-		pci_write_config_byte(pdev, USBRES_INTEL, 0);
+	/* perform any arch/bus specific configuration */
+	if (uhci->configure_hc)
+		uhci->configure_hc(uhci);
 }
 
-
 static int resume_detect_interrupts_are_broken(struct uhci_hcd *uhci)
 {
-	int port;
-
 	/* If we have to ignore overcurrent events then almost by definition
 	 * we can't depend on resume-detect interrupts. */
 	if (ignore_oc)
 		return 1;
 
-	switch (to_pci_dev(uhci_dev(uhci))->vendor) {
-	    default:
-		break;
-
-	    case PCI_VENDOR_ID_GENESYS:
-		/* Genesys Logic's GL880S controllers don't generate
-		 * resume-detect interrupts.
-		 */
-		return 1;
-
-	    case PCI_VENDOR_ID_INTEL:
-		/* Some of Intel's USB controllers have a bug that causes
-		 * resume-detect interrupts if any port has an over-current
-		 * condition.  To make matters worse, some motherboards
-		 * hardwire unused USB ports' over-current inputs active!
-		 * To prevent problems, we will not enable resume-detect
-		 * interrupts if any ports are OC.
-		 */
-		for (port = 0; port < uhci->rh_numports; ++port) {
-			if (inw(uhci->io_addr + USBPORTSC1 + port * 2) &
-					USBPORTSC_OC)
-				return 1;
-		}
-		break;
-	}
-	return 0;
+	return uhci->resume_detect_interrupts_are_broken ?
+		uhci->resume_detect_interrupts_are_broken(uhci) : 0;
 }
 
 static int global_suspend_mode_is_broken(struct uhci_hcd *uhci)
 {
-	int port;
-	const char *sys_info;
-	static char bad_Asus_board[] = "A7V8X";
-
-	/* One of Asus's motherboards has a bug which causes it to
-	 * wake up immediately from suspend-to-RAM if any of the ports
-	 * are connected.  In such cases we will not set EGSM.
-	 */
-	sys_info = dmi_get_system_info(DMI_BOARD_NAME);
-	if (sys_info && !strcmp(sys_info, bad_Asus_board)) {
-		for (port = 0; port < uhci->rh_numports; ++port) {
-			if (inw(uhci->io_addr + USBPORTSC1 + port * 2) &
-					USBPORTSC_CCS)
-				return 1;
-		}
-	}
-
-	return 0;
+	return uhci->global_suspend_mode_is_broken ?
+		uhci->global_suspend_mode_is_broken(uhci) : 0;
 }
 
 static void suspend_rh(struct uhci_hcd *uhci, enum uhci_rh_state new_state)
@@ -321,8 +338,8 @@ __acquires(uhci->lock)
 			!int_enable)
 		uhci->RD_enable = int_enable = 0;
 
-	outw(int_enable, uhci->io_addr + USBINTR);
-	outw(egsm_enable | USBCMD_CF, uhci->io_addr + USBCMD);
+	uhci_writew(uhci, int_enable, USBINTR);
+	uhci_writew(uhci, egsm_enable | USBCMD_CF, USBCMD);
 	mb();
 	udelay(5);
 
@@ -331,7 +348,7 @@ __acquires(uhci->lock)
 	 * controller should stop after a few microseconds.  Otherwise
 	 * we will give the controller one frame to stop.
 	 */
-	if (!auto_stop && !(inw(uhci->io_addr + USBSTS) & USBSTS_HCH)) {
+	if (!auto_stop && !(uhci_readw(uhci, USBSTS) & USBSTS_HCH)) {
 		uhci->rh_state = UHCI_RH_SUSPENDING;
 		spin_unlock_irq(&uhci->lock);
 		msleep(1);
@@ -339,7 +356,7 @@ __acquires(uhci->lock)
 		if (uhci->dead)
 			return;
 	}
-	if (!(inw(uhci->io_addr + USBSTS) & USBSTS_HCH))
+	if (!(uhci_readw(uhci, USBSTS) & USBSTS_HCH))
 		dev_warn(uhci_dev(uhci), "Controller not stopped yet!\n");
 
 	uhci_get_current_frame_number(uhci);
@@ -361,15 +378,14 @@ __acquires(uhci->lock)
 
 static void start_rh(struct uhci_hcd *uhci)
 {
-	uhci_to_hcd(uhci)->state = HC_STATE_RUNNING;
 	uhci->is_stopped = 0;
 
 	/* Mark it configured and running with a 64-byte max packet.
 	 * All interrupts are enabled, even though RESUME won't do anything.
 	 */
-	outw(USBCMD_RS | USBCMD_CF | USBCMD_MAXP, uhci->io_addr + USBCMD);
-	outw(USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP,
-			uhci->io_addr + USBINTR);
+	uhci_writew(uhci, USBCMD_RS | USBCMD_CF | USBCMD_MAXP, USBCMD);
+	uhci_writew(uhci, USBINTR_TIMEOUT | USBINTR_RESUME |
+		USBINTR_IOC | USBINTR_SP, USBINTR);
 	mb();
 	uhci->rh_state = UHCI_RH_RUNNING;
 	set_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
@@ -392,9 +408,9 @@ __acquires(uhci->lock)
 		unsigned egsm;
 
 		/* Keep EGSM on if it was set before */
-		egsm = inw(uhci->io_addr + USBCMD) & USBCMD_EGSM;
+		egsm = uhci_readw(uhci, USBCMD) & USBCMD_EGSM;
 		uhci->rh_state = UHCI_RH_RESUMING;
-		outw(USBCMD_FGR | USBCMD_CF | egsm, uhci->io_addr + USBCMD);
+		uhci_writew(uhci, USBCMD_FGR | USBCMD_CF | egsm, USBCMD);
 		spin_unlock_irq(&uhci->lock);
 		msleep(20);
 		spin_lock_irq(&uhci->lock);
@@ -402,10 +418,10 @@ __acquires(uhci->lock)
 			return;
 
 		/* End Global Resume and wait for EOP to be sent */
-		outw(USBCMD_CF, uhci->io_addr + USBCMD);
+		uhci_writew(uhci, USBCMD_CF, USBCMD);
 		mb();
 		udelay(4);
-		if (inw(uhci->io_addr + USBCMD) & USBCMD_FGR)
+		if (uhci_readw(uhci, USBCMD) & USBCMD_FGR)
 			dev_warn(uhci_dev(uhci), "FGR not stopped yet!\n");
 	}
 
@@ -425,10 +441,10 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd)
 	 * interrupt cause.  Contrary to the UHCI specification, the
 	 * "HC Halted" status bit is persistent: it is RO, not R/WC.
 	 */
-	status = inw(uhci->io_addr + USBSTS);
+	status = uhci_readw(uhci, USBSTS);
 	if (!(status & ~USBSTS_HCH))	/* shared interrupt, not mine */
 		return IRQ_NONE;
-	outw(status, uhci->io_addr + USBSTS);		/* Clear it */
+	uhci_writew(uhci, status, USBSTS);		/* Clear it */
 
 	if (status & ~(USBSTS_USBINT | USBSTS_ERROR | USBSTS_RD)) {
 		if (status & USBSTS_HSE)
@@ -450,6 +466,7 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd)
 					lprintk(errbuf);
 				}
 				uhci_hc_died(uhci);
+				usb_hc_died(hcd);
 
 				/* Force a callback in case there are
 				 * pending unlinks */
@@ -483,7 +500,7 @@ static void uhci_get_current_frame_number(struct uhci_hcd *uhci)
 	if (!uhci->is_stopped) {
 		unsigned delta;
 
-		delta = (inw(uhci->io_addr + USBFRNUM) - uhci->frame_number) &
+		delta = (uhci_readw(uhci, USBFRNUM) - uhci->frame_number) &
 				(UHCI_NUMFRAMES - 1);
 		uhci->frame_number += delta;
 	}
@@ -520,61 +537,6 @@ static void release_uhci(struct uhci_hcd *uhci)
 			uhci->frame, uhci->frame_dma_handle);
 }
 
-static int uhci_init(struct usb_hcd *hcd)
-{
-	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
-	unsigned io_size = (unsigned) hcd->rsrc_len;
-	int port;
-
-	uhci->io_addr = (unsigned long) hcd->rsrc_start;
-
-	/* The UHCI spec says devices must have 2 ports, and goes on to say
-	 * they may have more but gives no way to determine how many there
-	 * are.  However according to the UHCI spec, Bit 7 of the port
-	 * status and control register is always set to 1.  So we try to
-	 * use this to our advantage.  Another common failure mode when
-	 * a nonexistent register is addressed is to return all ones, so
-	 * we test for that also.
-	 */
-	for (port = 0; port < (io_size - USBPORTSC1) / 2; port++) {
-		unsigned int portstatus;
-
-		portstatus = inw(uhci->io_addr + USBPORTSC1 + (port * 2));
-		if (!(portstatus & 0x0080) || portstatus == 0xffff)
-			break;
-	}
-	if (debug)
-		dev_info(uhci_dev(uhci), "detected %d ports\n", port);
-
-	/* Anything greater than 7 is weird so we'll ignore it. */
-	if (port > UHCI_RH_MAXCHILD) {
-		dev_info(uhci_dev(uhci), "port count misdetected? "
-				"forcing to 2 ports\n");
-		port = 2;
-	}
-	uhci->rh_numports = port;
-
-	/* Kick BIOS off this hardware and reset if the controller
-	 * isn't already safely quiescent.
-	 */
-	check_and_reset_hc(uhci);
-	return 0;
-}
-
-/* Make sure the controller is quiescent and that we're not using it
- * any more.  This is mainly for the benefit of programs which, like kexec,
- * expect the hardware to be idle: not doing DMA or generating IRQs.
- *
- * This routine may be called in a damaged or failing kernel.  Hence we
- * do not acquire the spinlock before shutting down the controller.
- */
-static void uhci_shutdown(struct pci_dev *pdev)
-{
-	struct usb_hcd *hcd = pci_get_drvdata(pdev);
-
-	uhci_hc_died(hcd_to_uhci(hcd));
-}
-
 /*
  * Allocate a frame list, and then setup the skeleton
  *
@@ -669,16 +631,16 @@ static int uhci_start(struct usb_hcd *hcd)
 	 * 8 Interrupt queues; link all higher int queues to int1 = async
 	 */
 	for (i = SKEL_ISO + 1; i < SKEL_ASYNC; ++i)
-		uhci->skelqh[i]->link = LINK_TO_QH(uhci->skel_async_qh);
-	uhci->skel_async_qh->link = UHCI_PTR_TERM;
-	uhci->skel_term_qh->link = LINK_TO_QH(uhci->skel_term_qh);
+		uhci->skelqh[i]->link = LINK_TO_QH(uhci, uhci->skel_async_qh);
+	uhci->skel_async_qh->link = UHCI_PTR_TERM(uhci);
+	uhci->skel_term_qh->link = LINK_TO_QH(uhci, uhci->skel_term_qh);
 
 	/* This dummy TD is to work around a bug in Intel PIIX controllers */
-	uhci_fill_td(uhci->term_td, 0, uhci_explen(0) |
+	uhci_fill_td(uhci, uhci->term_td, 0, uhci_explen(0) |
 			(0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
-	uhci->term_td->link = UHCI_PTR_TERM;
+	uhci->term_td->link = UHCI_PTR_TERM(uhci);
 	uhci->skel_async_qh->element = uhci->skel_term_qh->element =
-			LINK_TO_TD(uhci->term_td);
+		LINK_TO_TD(uhci, uhci->term_td);
 
 	/*
 	 * Fill the frame list: make all entries point to the proper
@@ -791,86 +753,6 @@ static int uhci_rh_resume(struct usb_hcd *hcd)
 	return rc;
 }
 
-static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
-{
-	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
-	struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci));
-	int rc = 0;
-
-	dev_dbg(uhci_dev(uhci), "%s\n", __func__);
-
-	spin_lock_irq(&uhci->lock);
-	if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead)
-		goto done_okay;		/* Already suspended or dead */
-
-	if (uhci->rh_state > UHCI_RH_SUSPENDED) {
-		dev_warn(uhci_dev(uhci), "Root hub isn't suspended!\n");
-		rc = -EBUSY;
-		goto done;
-	};
-
-	/* All PCI host controllers are required to disable IRQ generation
-	 * at the source, so we must turn off PIRQ.
-	 */
-	pci_write_config_word(pdev, USBLEGSUP, 0);
-	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
-
-	/* Enable platform-specific non-PME# wakeup */
-	if (do_wakeup) {
-		if (pdev->vendor == PCI_VENDOR_ID_INTEL)
-			pci_write_config_byte(pdev, USBRES_INTEL,
-					USBPORT1EN | USBPORT2EN);
-	}
-
-done_okay:
-	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-done:
-	spin_unlock_irq(&uhci->lock);
-	return rc;
-}
-
-static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
-{
-	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
-
-	dev_dbg(uhci_dev(uhci), "%s\n", __func__);
-
-	/* Since we aren't in D3 any more, it's safe to set this flag
-	 * even if the controller was dead.
-	 */
-	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-
-	spin_lock_irq(&uhci->lock);
-
-	/* Make sure resume from hibernation re-enumerates everything */
-	if (hibernated)
-		uhci_hc_died(uhci);
-
-	/* The firmware or a boot kernel may have changed the controller
-	 * settings during a system wakeup.  Check it and reconfigure
-	 * to avoid problems.
-	 */
-	check_and_reset_hc(uhci);
-
-	/* If the controller was dead before, it's back alive now */
-	configure_hc(uhci);
-
-	/* Tell the core if the controller had to be reset */
-	if (uhci->rh_state == UHCI_RH_RESET)
-		usb_root_hub_lost_power(hcd->self.root_hub);
-
-	spin_unlock_irq(&uhci->lock);
-
-	/* If interrupts don't work and remote wakeup is enabled then
-	 * the suspended root hub needs to be polled.
-	 */
-	if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup)
-		set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
-
-	/* Does the root hub have a port wakeup pending? */
-	usb_hcd_poll_rh_status(hcd);
-	return 0;
-}
 #endif
 
 /* Wait until a particular device/endpoint's QH is idle, and free it */
@@ -908,67 +790,62 @@ static int uhci_hcd_get_frame_number(struct usb_hcd *hcd)
 	/* Minimize latency by avoiding the spinlock */
 	frame_number = uhci->frame_number;
 	barrier();
-	delta = (inw(uhci->io_addr + USBFRNUM) - frame_number) &
+	delta = (uhci_readw(uhci, USBFRNUM) - frame_number) &
 			(UHCI_NUMFRAMES - 1);
 	return frame_number + delta;
 }
 
-static const char hcd_name[] = "uhci_hcd";
-
-static const struct hc_driver uhci_driver = {
-	.description =		hcd_name,
-	.product_desc =		"UHCI Host Controller",
-	.hcd_priv_size =	sizeof(struct uhci_hcd),
-
-	/* Generic hardware linkage */
-	.irq =			uhci_irq,
-	.flags =		HCD_USB11,
-
-	/* Basic lifecycle operations */
-	.reset =		uhci_init,
-	.start =		uhci_start,
-#ifdef CONFIG_PM
-	.pci_suspend =		uhci_pci_suspend,
-	.pci_resume =		uhci_pci_resume,
-	.bus_suspend =		uhci_rh_suspend,
-	.bus_resume =		uhci_rh_resume,
-#endif
-	.stop =			uhci_stop,
+/* Determines number of ports on controller */
+static int uhci_count_ports(struct usb_hcd *hcd)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+	unsigned io_size = (unsigned) hcd->rsrc_len;
+	int port;
 
-	.urb_enqueue =		uhci_urb_enqueue,
-	.urb_dequeue =		uhci_urb_dequeue,
+	/* The UHCI spec says devices must have 2 ports, and goes on to say
+	 * they may have more but gives no way to determine how many there
+	 * are.  However according to the UHCI spec, Bit 7 of the port
+	 * status and control register is always set to 1.  So we try to
+	 * use this to our advantage.  Another common failure mode when
+	 * a nonexistent register is addressed is to return all ones, so
+	 * we test for that also.
+	 */
+	for (port = 0; port < (io_size - USBPORTSC1) / 2; port++) {
+		unsigned int portstatus;
 
-	.endpoint_disable =	uhci_hcd_endpoint_disable,
-	.get_frame_number =	uhci_hcd_get_frame_number,
+		portstatus = uhci_readw(uhci, USBPORTSC1 + (port * 2));
+		if (!(portstatus & 0x0080) || portstatus == 0xffff)
+			break;
+	}
+	if (debug)
+		dev_info(uhci_dev(uhci), "detected %d ports\n", port);
 
-	.hub_status_data =	uhci_hub_status_data,
-	.hub_control =		uhci_hub_control,
-};
+	/* Anything greater than 7 is weird so we'll ignore it. */
+	if (port > UHCI_RH_MAXCHILD) {
+		dev_info(uhci_dev(uhci), "port count misdetected? "
+				"forcing to 2 ports\n");
+		port = 2;
+	}
 
-static const struct pci_device_id uhci_pci_ids[] = { {
-	/* handle any USB UHCI controller */
-	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_UHCI, ~0),
-	.driver_data =	(unsigned long) &uhci_driver,
-	}, { /* end: all zeroes */ }
-};
+	return port;
+}
 
-MODULE_DEVICE_TABLE(pci, uhci_pci_ids);
+static const char hcd_name[] = "uhci_hcd";
 
-static struct pci_driver uhci_pci_driver = {
-	.name =		(char *)hcd_name,
-	.id_table =	uhci_pci_ids,
+#ifdef CONFIG_PCI
+#include "uhci-pci.c"
+#define	PCI_DRIVER		uhci_pci_driver
+#endif
 
-	.probe =	usb_hcd_pci_probe,
-	.remove =	usb_hcd_pci_remove,
-	.shutdown =	uhci_shutdown,
+#ifdef CONFIG_SPARC_LEON
+#include "uhci-grlib.c"
+#define PLATFORM_DRIVER		uhci_grlib_driver
+#endif
 
-#ifdef CONFIG_PM_SLEEP
-	.driver =	{
-		.pm =	&usb_hcd_pci_pm_ops
-	},
+#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER)
+#error "missing bus glue for uhci-hcd"
 #endif
-};
- 
+
 static int __init uhci_hcd_init(void)
 {
 	int retval = -ENOMEM;
@@ -994,13 +871,27 @@ static int __init uhci_hcd_init(void)
 	if (!uhci_up_cachep)
 		goto up_failed;
 
-	retval = pci_register_driver(&uhci_pci_driver);
-	if (retval)
-		goto init_failed;
+#ifdef PLATFORM_DRIVER
+	retval = platform_driver_register(&PLATFORM_DRIVER);
+	if (retval < 0)
+		goto clean0;
+#endif
+
+#ifdef PCI_DRIVER
+	retval = pci_register_driver(&PCI_DRIVER);
+	if (retval < 0)
+		goto clean1;
+#endif
 
 	return 0;
 
-init_failed:
+#ifdef PCI_DRIVER
+clean1:
+#endif
+#ifdef PLATFORM_DRIVER
+	platform_driver_unregister(&PLATFORM_DRIVER);
+clean0:
+#endif
 	kmem_cache_destroy(uhci_up_cachep);
 
 up_failed:
@@ -1017,7 +908,12 @@ errbuf_failed:
 
 static void __exit uhci_hcd_cleanup(void) 
 {
-	pci_unregister_driver(&uhci_pci_driver);
+#ifdef PLATFORM_DRIVER
+	platform_driver_unregister(&PLATFORM_DRIVER);
+#endif
+#ifdef PCI_DRIVER
+	pci_unregister_driver(&PCI_DRIVER);
+#endif
 	kmem_cache_destroy(uhci_up_cachep);
 	debugfs_remove(uhci_debugfs_root);
 	kfree(errbuf);