USB host: Move AMD PLL quirk to pci-quirks.c

This patch moves the AMD PLL quirk code in OHCI/EHCI driver to pci-quirks.c,
and exports the functions to be used by xHCI driver later.

AMD PLL quirk disable the optional PM feature inside specific
SB700/SB800/Hudson-2/3 platforms under the following conditions:

1. If an isochronous device is connected to OHCI/EHCI/xHCI port and is active;
2. Optional PM feature that powers down the internal Bus PLL when the link is
   in low power state is enabled.

Without AMD PLL quirk, USB isochronous stream may stutter or have breaks
occasionally, which greatly impair the performance of audio/video streams.

Currently AMD PLL quirk is implemented in OHCI and EHCI driver, and will be
added to xHCI driver too. They are doing similar things actually, so move
the quirk code to pci-quirks.c, which has several advantages:

1. Remove duplicate defines and functions in OHCI/EHCI (and xHCI) driver and
   make them cleaner;
2. AMD chipset information will be probed only once and then stored.
   Currently they're probed during every OHCI/EHCI initialization, move
   the detect code to pci-quirks.c saves the repeat detect cost;
3. Build up synchronization among OHCI/EHCI/xHCI driver. In current
   code, every host controller enable/disable PLL only according to
   its own status, and may enable PLL while there is still isoc transfer on
   other HCs. Move the quirk to pci-quirks.c prevents this issue.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alex He <alex.he@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 8 insertions, 102 deletions

diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 36ee9a666e9..9816a2870d0 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -22,24 +22,6 @@
 #include <linux/io.h>
 
 
-/* constants used to work around PM-related transfer
- * glitches in some AMD 700 series southbridges
- */
-#define AB_REG_BAR	0xf0
-#define AB_INDX(addr)	((addr) + 0x00)
-#define AB_DATA(addr)	((addr) + 0x04)
-#define AX_INDXC	0X30
-#define AX_DATAC	0x34
-
-#define NB_PCIE_INDX_ADDR	0xe0
-#define NB_PCIE_INDX_DATA	0xe4
-#define PCIE_P_CNTL		0x10040
-#define BIF_NB			0x10002
-
-static struct pci_dev *amd_smbus_dev;
-static struct pci_dev *amd_hb_dev;
-static int amd_ohci_iso_count;
-
 /*-------------------------------------------------------------------------*/
 
 static int broken_suspend(struct usb_hcd *hcd)
@@ -168,11 +150,14 @@ static int ohci_quirk_nec(struct usb_hcd *hcd)
 static int ohci_quirk_amd700(struct usb_hcd *hcd)
 {
 	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	struct pci_dev *amd_smbus_dev;
 	u8 rev = 0;
 
-	if (!amd_smbus_dev)
-		amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI,
-				PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
+	if (usb_amd_find_chipset_info())
+		ohci->flags |= OHCI_QUIRK_AMD_PLL;
+
+	amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI,
+			PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
 	if (!amd_smbus_dev)
 		return 0;
 
@@ -184,19 +169,8 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd)
 		ohci_dbg(ohci, "enabled AMD prefetch quirk\n");
 	}
 
-	if ((rev > 0x3b) || (rev < 0x30)) {
-		pci_dev_put(amd_smbus_dev);
-		amd_smbus_dev = NULL;
-		return 0;
-	}
-
-	amd_ohci_iso_count++;
-
-	if (!amd_hb_dev)
-		amd_hb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9600, NULL);
-
-	ohci->flags |= OHCI_QUIRK_AMD_ISO;
-	ohci_dbg(ohci, "enabled AMD ISO transfers quirk\n");
+	pci_dev_put(amd_smbus_dev);
+	amd_smbus_dev = NULL;
 
 	return 0;
 }
@@ -215,74 +189,6 @@ static int ohci_quirk_nvidia_shutdown(struct usb_hcd *hcd)
 	return 0;
 }
 
-/*
- * The hardware normally enables the A-link power management feature, which
- * lets the system lower the power consumption in idle states.
- *
- * Assume the system is configured to have USB 1.1 ISO transfers going
- * to or from a USB device.  Without this quirk, that stream may stutter
- * or have breaks occasionally.  For transfers going to speakers, this
- * makes a very audible mess...
- *
- * That audio playback corruption is due to the audio stream getting
- * interrupted occasionally when the link goes in lower power state
- * This USB quirk prevents the link going into that lower power state
- * during audio playback or other ISO operations.
- */
-static void quirk_amd_pll(int on)
-{
-	u32 addr;
-	u32 val;
-	u32 bit = (on > 0) ? 1 : 0;
-
-	pci_read_config_dword(amd_smbus_dev, AB_REG_BAR, &addr);
-
-	/* BIT names/meanings are NDA-protected, sorry ... */
-
-	outl(AX_INDXC, AB_INDX(addr));
-	outl(0x40, AB_DATA(addr));
-	outl(AX_DATAC, AB_INDX(addr));
-	val = inl(AB_DATA(addr));
-	val &= ~((1 << 3) | (1 << 4) | (1 << 9));
-	val |= (bit << 3) | ((!bit) << 4) | ((!bit) << 9);
-	outl(val, AB_DATA(addr));
-
-	if (amd_hb_dev) {
-		addr = PCIE_P_CNTL;
-		pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_ADDR, addr);
-
-		pci_read_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, &val);
-		val &= ~(1 | (1 << 3) | (1 << 4) | (1 << 9) | (1 << 12));
-		val |= bit | (bit << 3) | (bit << 12);
-		val |= ((!bit) << 4) | ((!bit) << 9);
-		pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, val);
-
-		addr = BIF_NB;
-		pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_ADDR, addr);
-
-		pci_read_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, &val);
-		val &= ~(1 << 8);
-		val |= bit << 8;
-		pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, val);
-	}
-}
-
-static void amd_iso_dev_put(void)
-{
-	amd_ohci_iso_count--;
-	if (amd_ohci_iso_count == 0) {
-		if (amd_smbus_dev) {
-			pci_dev_put(amd_smbus_dev);
-			amd_smbus_dev = NULL;
-		}
-		if (amd_hb_dev) {
-			pci_dev_put(amd_hb_dev);
-			amd_hb_dev = NULL;
-		}
-	}
-
-}
-
 static void sb800_prefetch(struct ohci_hcd *ohci, int on)
 {
 	struct pci_dev *pdev;