Revert "USB: don't explicitly reenable root-hub status interrupts"

This reverts commit e872154921a6b5256a3c412dd69158ac0b135176.

Andrey Borzenkov reports that it resulted in a totally hung machine for
him when loading the OHCI driver.  Extensive netconsole capture with
SysRq output shows that modprobe gets stuck in ohci_hub_status_data()
when probing and enabling the OHCI controller, see for example

	http://lkml.org/lkml/2008/7/5/236

for an analysis.

The problem appears to be an interrupt flood triggered by the commit
that gets reverted, and Andrey confirmed that the revert makes things
work for him again.

Reported-and-tested-by: Andrey Borzenkov <arvidjaar@mail.ru>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: David Brownell <david-b@pacbell.net>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 22 insertions, 31 deletions

diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 79a78029f89..b56739221d1 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -36,6 +36,18 @@
 
 /*-------------------------------------------------------------------------*/
 
+/* hcd->hub_irq_enable() */
+static void ohci_rhsc_enable (struct usb_hcd *hcd)
+{
+	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
+
+	spin_lock_irq(&ohci->lock);
+	if (!ohci->autostop)
+		del_timer(&hcd->rh_timer);	/* Prevent next poll */
+	ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+	spin_unlock_irq(&ohci->lock);
+}
+
 #define OHCI_SCHED_ENABLES \
 	(OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
 
@@ -362,28 +374,18 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 		int any_connected)
 {
 	int	poll_rh = 1;
-	int	rhsc;
 
-	rhsc = ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC;
 	switch (ohci->hc_control & OHCI_CTRL_HCFS) {
 
 	case OHCI_USB_OPER:
-		/* If no status changes are pending, enable status-change
-		 * interrupts.
-		 */
-		if (!rhsc && !changed) {
-			rhsc = OHCI_INTR_RHSC;
-			ohci_writel(ohci, rhsc, &ohci->regs->intrenable);
-		}
-
-		/* Keep on polling until we know a device is connected
-		 * and RHSC is enabled, or until we autostop.
-		 */
+		/* keep on polling until we know a device is connected
+		 * and RHSC is enabled */
 		if (!ohci->autostop) {
 			if (any_connected ||
 					!device_may_wakeup(&ohci_to_hcd(ohci)
 						->self.root_hub->dev)) {
-				if (rhsc)
+				if (ohci_readl(ohci, &ohci->regs->intrenable) &
+						OHCI_INTR_RHSC)
 					poll_rh = 0;
 			} else {
 				ohci->autostop = 1;
@@ -396,13 +398,12 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 				ohci->autostop = 0;
 				ohci->next_statechange = jiffies +
 						STATECHANGE_DELAY;
-			} else if (rhsc && time_after_eq(jiffies,
+			} else if (time_after_eq(jiffies,
 						ohci->next_statechange)
 					&& !ohci->ed_rm_list
 					&& !(ohci->hc_control &
 						OHCI_SCHED_ENABLES)) {
 				ohci_rh_suspend(ohci, 1);
-				poll_rh = 0;
 			}
 		}
 		break;
@@ -416,12 +417,6 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 			else
 				usb_hcd_resume_root_hub(ohci_to_hcd(ohci));
 		} else {
-			if (!rhsc && (ohci->autostop ||
-					ohci_to_hcd(ohci)->self.root_hub->
-						do_remote_wakeup))
-				ohci_writel(ohci, OHCI_INTR_RHSC,
-						&ohci->regs->intrenable);
-
 			/* everything is idle, no need for polling */
 			poll_rh = 0;
 		}
@@ -443,16 +438,12 @@ static inline int ohci_rh_resume(struct ohci_hcd *ohci)
 static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 		int any_connected)
 {
-	/* If RHSC is enabled, don't poll */
-	if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
-		return 0;
+	int	poll_rh = 1;
 
-	/* If no status changes are pending, enable status-change interrupts */
-	if (!changed) {
-		ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
-		return 0;
-	}
-	return 1;
+	/* keep on polling until RHSC is enabled */
+	if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
+		poll_rh = 0;
+	return poll_rh;
 }
 
 #endif	/* CONFIG_PM */