Merge tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB changes from Greg Kroah-Hartman:
 "Here is the big USB pull request for 3.7-rc1

  There are lots of gadget driver changes (including copying a bunch of
  files into the drivers/staging/ccg/ directory so that the other gadget
  drivers can be fixed up properly without breaking that driver), and we
  remove the old obsolete ub.c driver from the tree.

  There are also the usual XHCI set of updates, and other various driver
  changes and updates.  We also are trying hard to remove the old dbg()
  macro, but the final bits of that removal will be coming in through
  the networking tree before we can delete it for good.

  All of these patches have been in the linux-next tree.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up several annoying - but fairly mindless - conflicts due to the
termios structure having moved into the tty device, and often clashing
with dbg -> dev_dbg conversion.

* tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (339 commits)
  USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
  USB: uas: fix gcc warning
  USB: uas: fix locking
  USB: Fix race condition when removing host controllers
  USB: uas: add locking
  USB: uas: fix abort
  USB: uas: remove aborted field, replace with status bit.
  USB: uas: fix task management
  USB: uas: keep track of command urbs
  xhci: Intel Panther Point BEI quirk.
  powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY
  USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support
  Revert "usb : Add sysfs files to control port power."
  USB: serial: remove vizzini driver
  usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems
  Increase XHCI suspend timeout to 16ms
  USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
  USB: sierra_ms: don't keep unused variable
  fsl/usb: Add support for USB controller version 2.4
  USB: qcaux: add Pantech vendor class match
  ...

56 files changed, 3263 insertions, 1351 deletions

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 51ab5fd5d46..dfb51a45496 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -154,16 +154,25 @@ config USB_LPC32XX
 
 config USB_ATMEL_USBA
 	tristate "Atmel USBA"
-	select USB_GADGET_DUALSPEED
 	depends on AVR32 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
 	help
 	  USBA is the integrated high-speed USB Device controller on
 	  the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
 
+config USB_BCM63XX_UDC
+	tristate "Broadcom BCM63xx Peripheral Controller"
+	depends on BCM63XX
+	help
+	   Many Broadcom BCM63xx chipsets (such as the BCM6328) have a
+	   high speed USB Device Port with support for four fixed endpoints
+	   (plus endpoint zero).
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "bcm63xx_udc".
+
 config USB_FSL_USB2
 	tristate "Freescale Highspeed USB DR Peripheral Controller"
 	depends on FSL_SOC || ARCH_MXC
-	select USB_GADGET_DUALSPEED
 	select USB_FSL_MPH_DR_OF if OF
 	help
 	   Some of Freescale PowerPC and i.MX processors have a High Speed
@@ -179,7 +188,6 @@ config USB_FSL_USB2
 config USB_FUSB300
 	tristate "Faraday FUSB300 USB Peripheral Controller"
 	depends on !PHYS_ADDR_T_64BIT
-	select USB_GADGET_DUALSPEED
 	help
 	   Faraday usb device controller FUSB300 driver
 
@@ -227,7 +235,6 @@ config USB_PXA25X_SMALL
 
 config USB_R8A66597
 	tristate "Renesas R8A66597 USB Peripheral Controller"
-	select USB_GADGET_DUALSPEED
 	help
 	   R8A66597 is a discrete USB host and peripheral controller chip that
 	   supports both full and high speed USB 2.0 data transfers.
@@ -240,7 +247,6 @@ config USB_R8A66597
 config USB_RENESAS_USBHS_UDC
 	tristate 'Renesas USBHS controller'
 	depends on USB_RENESAS_USBHS
-	select USB_GADGET_DUALSPEED
 	help
 	   Renesas USBHS is a discrete USB host and peripheral controller chip
 	   that supports both full and high speed USB 2.0 data transfers.
@@ -268,7 +274,6 @@ config USB_PXA27X
 config USB_S3C_HSOTG
 	tristate "S3C HS/OtG USB Device controller"
 	depends on S3C_DEV_USB_HSOTG
-	select USB_GADGET_DUALSPEED
 	help
 	  The Samsung S3C64XX USB2.0 high-speed gadget controller
 	  integrated into the S3C64XX series SoC.
@@ -305,7 +310,6 @@ config USB_S3C2410_DEBUG
 config USB_S3C_HSUDC
 	tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
 	depends on ARCH_S3C24XX
-	select USB_GADGET_DUALSPEED
 	help
 	  Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC
 	  integrated with dual speed USB 2.0 device controller. It has
@@ -315,7 +319,6 @@ config USB_S3C_HSUDC
 
 config USB_MV_UDC
 	tristate "Marvell USB2.0 Device Controller"
-	select USB_GADGET_DUALSPEED
 	help
 	  Marvell Socs (including PXA and MMP series) include a high speed
 	  USB2.0 OTG controller, which can be configured as high speed or
@@ -338,14 +341,12 @@ config USB_MV_U3D
 config USB_GADGET_MUSB_HDRC
 	tristate "Inventra HDRC USB Peripheral (TI, ADI, ...)"
 	depends on USB_MUSB_HDRC
-	select USB_GADGET_DUALSPEED
 	help
 	  This OTG-capable silicon IP is used in dual designs including
 	  the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin
 
 config USB_M66592
 	tristate "Renesas M66592 USB Peripheral Controller"
-	select USB_GADGET_DUALSPEED
 	help
 	   M66592 is a discrete USB peripheral controller chip that
 	   supports both full and high speed USB 2.0 data transfers.
@@ -362,7 +363,6 @@ config USB_M66592
 config USB_AMD5536UDC
 	tristate "AMD5536 UDC"
 	depends on PCI
-	select USB_GADGET_DUALSPEED
 	help
 	   The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
 	   It is a USB Highspeed DMA capable USB device controller. Beside ep0
@@ -389,7 +389,6 @@ config USB_FSL_QE
 
 config USB_NET2272
 	tristate "PLX NET2272"
-	select USB_GADGET_DUALSPEED
 	help
 	  PLX NET2272 is a USB peripheral controller which supports
 	  both full and high speed USB 2.0 data transfers.
@@ -413,7 +412,6 @@ config USB_NET2272_DMA
 config USB_NET2280
 	tristate "NetChip 228x"
 	depends on PCI
-	select USB_GADGET_DUALSPEED
 	help
 	   NetChip 2280 / 2282 is a PCI based USB peripheral controller which
 	   supports both full and high speed USB 2.0 data transfers.
@@ -443,7 +441,6 @@ config USB_GOKU
 config USB_EG20T
 	tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
 	depends on PCI
-	select USB_GADGET_DUALSPEED
 	help
 	  This is a USB device driver for EG20T PCH.
 	  EG20T PCH is the platform controller hub that is used in Intel's
@@ -470,8 +467,6 @@ config USB_EG20T
 config USB_DUMMY_HCD
 	tristate "Dummy HCD (DEVELOPMENT)"
 	depends on USB=y || (USB=m && USB_GADGET=m)
-	select USB_GADGET_DUALSPEED
-	select USB_GADGET_SUPERSPEED
 	help
 	  This host controller driver emulates USB, looping all data transfer
 	  requests back to a USB "gadget driver" in the same host.  The host
@@ -496,18 +491,15 @@ config USB_DUMMY_HCD
 
 endmenu
 
-# Selected by UDC drivers that support high-speed operation.
-config USB_GADGET_DUALSPEED
-	bool
-
-# Selected by UDC drivers that support super-speed opperation
-config USB_GADGET_SUPERSPEED
-	bool
-	depends on USB_GADGET_DUALSPEED
-
 #
 # USB Gadget Drivers
 #
+
+# composite based drivers
+config USB_LIBCOMPOSITE
+	tristate
+	depends on USB_GADGET
+
 choice
 	tristate "USB Gadget Drivers"
 	default USB_ETH
@@ -531,6 +523,7 @@ choice
 
 config USB_ZERO
 	tristate "Gadget Zero (DEVELOPMENT)"
+	select USB_LIBCOMPOSITE
 	help
 	  Gadget Zero is a two-configuration device.  It either sinks and
 	  sources bulk data; or it loops back a configurable number of
@@ -564,8 +557,9 @@ config USB_ZERO_HNPTEST
 	  one serve as the USB host instead (in the "B-Host" role).
 
 config USB_AUDIO
-	tristate "Audio Gadget (EXPERIMENTAL)"
+	tristate "Audio Gadget"
 	depends on SND
+	select USB_LIBCOMPOSITE
 	select SND_PCM
 	help
 	  This Gadget Audio driver is compatible with USB Audio Class
@@ -594,6 +588,7 @@ config GADGET_UAC1
 config USB_ETH
 	tristate "Ethernet Gadget (with CDC Ethernet support)"
 	depends on NET
+	select USB_LIBCOMPOSITE
 	select CRC32
 	help
 	  This driver implements Ethernet style communication, in one of
@@ -629,6 +624,7 @@ config USB_ETH
 config USB_ETH_RNDIS
 	bool "RNDIS support"
 	depends on USB_ETH
+	select USB_LIBCOMPOSITE
 	default y
 	help
 	   Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol,
@@ -647,6 +643,7 @@ config USB_ETH_RNDIS
 config USB_ETH_EEM
        bool "Ethernet Emulation Model (EEM) support"
        depends on USB_ETH
+	select USB_LIBCOMPOSITE
        default n
        help
          CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
@@ -663,6 +660,7 @@ config USB_ETH_EEM
 config USB_G_NCM
 	tristate "Network Control Model (NCM) support"
 	depends on NET
+	select USB_LIBCOMPOSITE
 	select CRC32
 	help
 	  This driver implements USB CDC NCM subclass standard. NCM is
@@ -674,8 +672,7 @@ config USB_G_NCM
 	  dynamically linked module called "g_ncm".
 
 config USB_GADGETFS
-	tristate "Gadget Filesystem (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	tristate "Gadget Filesystem"
 	help
 	  This driver provides a filesystem based API that lets user mode
 	  programs implement a single-configuration USB device, including
@@ -683,15 +680,12 @@ config USB_GADGETFS
 	  All endpoints, transfer speeds, and transfer types supported by
 	  the hardware are available, through read() and write() calls.
 
-	  Currently, this option is still labelled as EXPERIMENTAL because
-	  of existing race conditions in the underlying in-kernel AIO core.
-
 	  Say "y" to link the driver statically, or "m" to build a
 	  dynamically linked module called "gadgetfs".
 
 config USB_FUNCTIONFS
-	tristate "Function Filesystem (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	tristate "Function Filesystem"
+	select USB_LIBCOMPOSITE
 	select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS)
 	help
 	  The Function Filesystem (FunctionFS) lets one create USB
@@ -755,6 +749,7 @@ config USB_FILE_STORAGE_TEST
 config USB_MASS_STORAGE
 	tristate "Mass Storage Gadget"
 	depends on BLOCK
+	select USB_LIBCOMPOSITE
 	help
 	  The Mass Storage Gadget acts as a USB Mass Storage disk drive.
 	  As its storage repository it can use a regular file or a block
@@ -770,6 +765,7 @@ config USB_MASS_STORAGE
 config USB_GADGET_TARGET
 	tristate "USB Gadget Target Fabric Module"
 	depends on TARGET_CORE
+	select USB_LIBCOMPOSITE
 	help
 	  This fabric is an USB gadget. Two USB protocols are supported that is
 	  BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is
@@ -779,6 +775,7 @@ config USB_GADGET_TARGET
 
 config USB_G_SERIAL
 	tristate "Serial Gadget (with CDC ACM and CDC OBEX support)"
+	select USB_LIBCOMPOSITE
 	help
 	  The Serial Gadget talks to the Linux-USB generic serial driver.
 	  This driver supports a CDC-ACM module option, which can be used
@@ -797,8 +794,9 @@ config USB_G_SERIAL
 	  make MS-Windows work with CDC ACM.
 
 config USB_MIDI_GADGET
-	tristate "MIDI Gadget (EXPERIMENTAL)"
-	depends on SND && EXPERIMENTAL
+	tristate "MIDI Gadget"
+	depends on SND
+	select USB_LIBCOMPOSITE
 	select SND_RAWMIDI
 	help
 	  The MIDI Gadget acts as a USB Audio device, with one MIDI
@@ -812,6 +810,7 @@ config USB_MIDI_GADGET
 
 config USB_G_PRINTER
 	tristate "Printer Gadget"
+	select USB_LIBCOMPOSITE
 	help
 	  The Printer Gadget channels data between the USB host and a
 	  userspace program driving the print engine. The user space
@@ -828,6 +827,7 @@ config USB_G_PRINTER
 config USB_CDC_COMPOSITE
 	tristate "CDC Composite Device (Ethernet and ACM)"
 	depends on NET
+	select USB_LIBCOMPOSITE
 	help
 	  This driver provides two functions in one configuration:
 	  a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link.
@@ -842,6 +842,7 @@ config USB_CDC_COMPOSITE
 config USB_G_NOKIA
 	tristate "Nokia composite gadget"
 	depends on PHONET
+	select USB_LIBCOMPOSITE
 	help
 	  The Nokia composite gadget provides support for acm, obex
 	  and phonet in only one composite gadget driver.
@@ -852,6 +853,7 @@ config USB_G_NOKIA
 config USB_G_ACM_MS
 	tristate "CDC Composite Device (ACM and mass storage)"
 	depends on BLOCK
+	select USB_LIBCOMPOSITE
 	help
 	  This driver provides two functions in one configuration:
 	  a mass storage, and a CDC ACM (serial port) link.
@@ -860,9 +862,10 @@ config USB_G_ACM_MS
 	  dynamically linked module called "g_acm_ms".
 
 config USB_G_MULTI
-	tristate "Multifunction Composite Gadget (EXPERIMENTAL)"
+	tristate "Multifunction Composite Gadget"
 	depends on BLOCK && NET
 	select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS
+	select USB_LIBCOMPOSITE
 	help
 	  The Multifunction Composite Gadget provides Ethernet (RNDIS
 	  and/or CDC Ethernet), mass storage and ACM serial link
@@ -903,6 +906,7 @@ config USB_G_MULTI_CDC
 
 config USB_G_HID
 	tristate "HID Gadget"
+	select USB_LIBCOMPOSITE
 	help
 	  The HID gadget driver provides generic emulation of USB
 	  Human Interface Devices (HID).
@@ -913,8 +917,10 @@ config USB_G_HID
 	  Say "y" to link the driver statically, or "m" to build a
 	  dynamically linked module called "g_hid".
 
+# Standalone / single function gadgets
 config USB_G_DBGP
 	tristate "EHCI Debug Device Gadget"
+	select USB_LIBCOMPOSITE
 	help
 	  This gadget emulates an EHCI Debug device. This is useful when you want
 	  to interact with an EHCI Debug Port.
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 3fd8cd09d2c..307be5fa824 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -4,6 +4,9 @@
 ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG
 
 obj-$(CONFIG_USB_GADGET)	+= udc-core.o
+obj-$(CONFIG_USB_LIBCOMPOSITE)	+= libcomposite.o
+libcomposite-y			:= usbstring.o config.o epautoconf.o
+libcomposite-y			+= composite.o
 obj-$(CONFIG_USB_DUMMY_HCD)	+= dummy_hcd.o
 obj-$(CONFIG_USB_NET2272)	+= net2272.o
 obj-$(CONFIG_USB_NET2280)	+= net2280.o
@@ -16,6 +19,7 @@ obj-$(CONFIG_USB_OMAP)		+= omap_udc.o
 obj-$(CONFIG_USB_S3C2410)	+= s3c2410_udc.o
 obj-$(CONFIG_USB_AT91)		+= at91_udc.o
 obj-$(CONFIG_USB_ATMEL_USBA)	+= atmel_usba_udc.o
+obj-$(CONFIG_USB_BCM63XX_UDC)	+= bcm63xx_udc.o
 obj-$(CONFIG_USB_FSL_USB2)	+= fsl_usb2_udc.o
 fsl_usb2_udc-y			:= fsl_udc_core.o
 fsl_usb2_udc-$(CONFIG_ARCH_MXC)	+= fsl_mxc_udc.o
diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c
index 75b8a691fd0..5a7f289805f 100644
--- a/drivers/usb/gadget/acm_ms.c
+++ b/drivers/usb/gadget/acm_ms.c
@@ -15,7 +15,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
+#include <linux/module.h>
 
 #include "u_serial.h"
 
@@ -41,15 +41,12 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 
-#include "composite.c"
-#include "usbstring.c"
-#include "config.c"
-#include "epautoconf.c"
 #include "u_serial.c"
 #include "f_acm.c"
 #include "f_mass_storage.c"
 
 /*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
 
 static struct usb_device_descriptor device_desc = {
 	.bLength =		sizeof device_desc,
@@ -89,17 +86,11 @@ static const struct usb_descriptor_header *otg_desc[] = {
 	NULL,
 };
 
-
 /* string IDs are assigned dynamically */
-
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
-
-static char manufacturer[50];
-
 static struct usb_string strings_dev[] = {
-	[STRING_MANUFACTURER_IDX].s = manufacturer,
-	[STRING_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
 	{  } /* end of list */
 };
 
@@ -157,7 +148,6 @@ static struct usb_configuration acm_ms_config_driver = {
 
 static int __init acm_ms_bind(struct usb_composite_dev *cdev)
 {
-	int			gcnum;
 	struct usb_gadget	*gadget = cdev->gadget;
 	int			status;
 	void			*retp;
@@ -174,44 +164,22 @@ static int __init acm_ms_bind(struct usb_composite_dev *cdev)
 		goto fail0;
 	}
 
-	/* set bcdDevice */
-	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0) {
-		device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
-	} else {
-		WARNING(cdev, "controller '%s' not recognized; trying %s\n",
-				gadget->name,
-				acm_ms_config_driver.label);
-		device_desc.bcdDevice =
-			cpu_to_le16(0x0300 | 0x0099);
-	}
-
 	/*
 	 * Allocate string descriptor numbers ... note that string
 	 * contents can be overridden by the composite_dev glue.
 	 */
-
-	/* device descriptor strings: manufacturer, product */
-	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
-		init_utsname()->sysname, init_utsname()->release,
-		gadget->name);
-	status = usb_string_id(cdev);
-	if (status < 0)
-		goto fail1;
-	strings_dev[STRING_MANUFACTURER_IDX].id = status;
-	device_desc.iManufacturer = status;
-
-	status = usb_string_id(cdev);
+	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail1;
-	strings_dev[STRING_PRODUCT_IDX].id = status;
-	device_desc.iProduct = status;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 
 	/* register our configuration */
 	status = usb_add_config(cdev, &acm_ms_config_driver, acm_ms_do_config);
 	if (status < 0)
 		goto fail1;
 
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n",
 			DRIVER_DESC);
 	fsg_common_put(&fsg_common);
@@ -232,11 +200,12 @@ static int __exit acm_ms_unbind(struct usb_composite_dev *cdev)
 	return 0;
 }
 
-static struct usb_composite_driver acm_ms_driver = {
+static __refdata struct usb_composite_driver acm_ms_driver = {
 	.name		= "g_acm_ms",
 	.dev		= &device_desc,
 	.max_speed	= USB_SPEED_SUPER,
 	.strings	= dev_strings,
+	.bind		= acm_ms_bind,
 	.unbind		= __exit_p(acm_ms_unbind),
 };
 
@@ -246,7 +215,7 @@ MODULE_LICENSE("GPL v2");
 
 static int __init init(void)
 {
-	return usb_composite_probe(&acm_ms_driver, acm_ms_bind);
+	return usb_composite_probe(&acm_ms_driver);
 }
 module_init(init);
 
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 187d21181cd..fc0ec5e0d58 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -1401,7 +1401,7 @@ static int udc_wakeup(struct usb_gadget *gadget)
 }
 
 static int amd5536_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
 static int amd5536_stop(struct usb_gadget_driver *driver);
 /* gadget operations */
 static const struct usb_gadget_ops udc_ops = {
@@ -1914,7 +1914,7 @@ static int setup_ep0(struct udc *dev)
 
 /* Called by gadget driver to register itself */
 static int amd5536_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	struct udc		*dev = udc;
 	int			retval;
@@ -1932,7 +1932,7 @@ static int amd5536_start(struct usb_gadget_driver *driver,
 	dev->driver = driver;
 	dev->gadget.dev.driver = &driver->driver;
 
-	retval = bind(&dev->gadget);
+	retval = bind(&dev->gadget, driver);
 
 	/* Some gadget drivers use both ep0 directions.
 	 * NOTE: to gadget driver, ep0 is just one endpoint...
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 1e35963bd4e..89d90b5fb78 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -469,7 +469,7 @@ static int at91_ep_enable(struct usb_ep *_ep,
 				const struct usb_endpoint_descriptor *desc)
 {
 	struct at91_ep	*ep = container_of(_ep, struct at91_ep, ep);
-	struct at91_udc	*udc = ep->udc;
+	struct at91_udc *udc;
 	u16		maxpacket;
 	u32		tmp;
 	unsigned long	flags;
@@ -483,6 +483,7 @@ static int at91_ep_enable(struct usb_ep *_ep,
 		return -EINVAL;
 	}
 
+	udc = ep->udc;
 	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
 		DBG("bogus device state\n");
 		return -ESHUTDOWN;
@@ -1699,7 +1700,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev)
 	int		retval;
 	struct resource	*res;
 
-	if (!dev->platform_data) {
+	if (!dev->platform_data && !pdev->dev.of_node) {
 		/* small (so we copy it) but critical! */
 		DBG("missing platform_data\n");
 		return -ENODEV;
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index 98899244860..231b0efe8fd 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -12,35 +12,21 @@
 /* #define VERBOSE_DEBUG */
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
+#include <linux/module.h>
+#include <linux/usb/composite.h>
 
+#include "gadget_chips.h"
 #define DRIVER_DESC		"Linux USB Audio Gadget"
 #define DRIVER_VERSION		"Feb 2, 2012"
 
-/*-------------------------------------------------------------------------*/
-
-/*
- * Kbuild is not very cooperative with respect to linking separately
- * compiled library objects into one module.  So for now we won't use
- * separate compilation ... ensuring init/exit sections work to shrink
- * the runtime footprint, and giving us at least some parts of what
- * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
- */
-#include "composite.c"
-#include "usbstring.c"
-#include "config.c"
-#include "epautoconf.c"
+USB_GADGET_COMPOSITE_OPTIONS();
 
 /* string IDs are assigned dynamically */
 
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
-
-static char manufacturer[50];
-
 static struct usb_string strings_dev[] = {
-	[STRING_MANUFACTURER_IDX].s = manufacturer,
-	[STRING_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
 	{  } /* end of list */
 };
 
@@ -149,39 +135,18 @@ static struct usb_configuration audio_config_driver = {
 
 static int __init audio_bind(struct usb_composite_dev *cdev)
 {
-	int			gcnum;
 	int			status;
 
-	gcnum = usb_gadget_controller_number(cdev->gadget);
-	if (gcnum >= 0)
-		device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
-	else {
-		ERROR(cdev, "controller '%s' not recognized; trying %s\n",
-			cdev->gadget->name,
-			audio_config_driver.label);
-		device_desc.bcdDevice =
-			__constant_cpu_to_le16(0x0300 | 0x0099);
-	}
-
-	/* device descriptor strings: manufacturer, product */
-	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
-		init_utsname()->sysname, init_utsname()->release,
-		cdev->gadget->name);
-	status = usb_string_id(cdev);
-	if (status < 0)
-		goto fail;
-	strings_dev[STRING_MANUFACTURER_IDX].id = status;
-	device_desc.iManufacturer = status;
-
-	status = usb_string_id(cdev);
+	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail;
-	strings_dev[STRING_PRODUCT_IDX].id = status;
-	device_desc.iProduct = status;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 
 	status = usb_add_config(cdev, &audio_config_driver, audio_do_config);
 	if (status < 0)
 		goto fail;
+	usb_composite_overwrite_options(cdev, &coverwrite);
 
 	INFO(cdev, "%s, version: %s\n", DRIVER_DESC, DRIVER_VERSION);
 	return 0;
@@ -198,17 +163,18 @@ static int __exit audio_unbind(struct usb_composite_dev *cdev)
 	return 0;
 }
 
-static struct usb_composite_driver audio_driver = {
+static __refdata struct usb_composite_driver audio_driver = {
 	.name		= "g_audio",
 	.dev		= &device_desc,
 	.strings	= audio_strings,
 	.max_speed	= USB_SPEED_HIGH,
+	.bind		= audio_bind,
 	.unbind		= __exit_p(audio_unbind),
 };
 
 static int __init init(void)
 {
-	return usb_composite_probe(&audio_driver, audio_bind);
+	return usb_composite_probe(&audio_driver);
 }
 module_init(init);
 
diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c
new file mode 100644
index 00000000000..9ca792224cd
--- /dev/null
+++ b/drivers/usb/gadget/bcm63xx_udc.c
@@ -0,0 +1,2464 @@
+/*
+ * bcm63xx_udc.c -- BCM63xx UDC high/full speed USB device controller
+ *
+ * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
+ * Copyright (C) 2012 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/bitops.h>
+#include <linux/bug.h>
+#include <linux/clk.h>
+#include <linux/compiler.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kconfig.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/workqueue.h>
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_iudma.h>
+#include <bcm63xx_dev_usb_usbd.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+
+#define DRV_MODULE_NAME		"bcm63xx_udc"
+
+static const char bcm63xx_ep0name[] = "ep0";
+static const char *const bcm63xx_ep_name[] = {
+	bcm63xx_ep0name,
+	"ep1in-bulk", "ep2out-bulk", "ep3in-int", "ep4out-int",
+};
+
+static bool use_fullspeed;
+module_param(use_fullspeed, bool, S_IRUGO);
+MODULE_PARM_DESC(use_fullspeed, "true for fullspeed only");
+
+/*
+ * RX IRQ coalescing options:
+ *
+ * false (default) - one IRQ per DATAx packet.  Slow but reliable.  The
+ * driver is able to pass the "testusb" suite and recover from conditions like:
+ *
+ *   1) Device queues up a 2048-byte RX IUDMA transaction on an OUT bulk ep
+ *   2) Host sends 512 bytes of data
+ *   3) Host decides to reconfigure the device and sends SET_INTERFACE
+ *   4) Device shuts down the endpoint and cancels the RX transaction
+ *
+ * true - one IRQ per transfer, for transfers <= 2048B.  Generates
+ * considerably fewer IRQs, but error recovery is less robust.  Does not
+ * reliably pass "testusb".
+ *
+ * TX always uses coalescing, because we can cancel partially complete TX
+ * transfers by repeatedly flushing the FIFO.  The hardware doesn't allow
+ * this on RX.
+ */
+static bool irq_coalesce;
+module_param(irq_coalesce, bool, S_IRUGO);
+MODULE_PARM_DESC(irq_coalesce, "take one IRQ per RX transfer");
+
+#define BCM63XX_NUM_EP			5
+#define BCM63XX_NUM_IUDMA		6
+#define BCM63XX_NUM_FIFO_PAIRS		3
+
+#define IUDMA_RESET_TIMEOUT_US		10000
+
+#define IUDMA_EP0_RXCHAN		0
+#define IUDMA_EP0_TXCHAN		1
+
+#define IUDMA_MAX_FRAGMENT		2048
+#define BCM63XX_MAX_CTRL_PKT		64
+
+#define BCMEP_CTRL			0x00
+#define BCMEP_ISOC			0x01
+#define BCMEP_BULK			0x02
+#define BCMEP_INTR			0x03
+
+#define BCMEP_OUT			0x00
+#define BCMEP_IN			0x01
+
+#define BCM63XX_SPD_FULL		1
+#define BCM63XX_SPD_HIGH		0
+
+#define IUDMA_DMAC_OFFSET		0x200
+#define IUDMA_DMAS_OFFSET		0x400
+
+enum bcm63xx_ep0_state {
+	EP0_REQUEUE,
+	EP0_IDLE,
+	EP0_IN_DATA_PHASE_SETUP,
+	EP0_IN_DATA_PHASE_COMPLETE,
+	EP0_OUT_DATA_PHASE_SETUP,
+	EP0_OUT_DATA_PHASE_COMPLETE,
+	EP0_OUT_STATUS_PHASE,
+	EP0_IN_FAKE_STATUS_PHASE,
+	EP0_SHUTDOWN,
+};
+
+static const char __maybe_unused bcm63xx_ep0_state_names[][32] = {
+	"REQUEUE",
+	"IDLE",
+	"IN_DATA_PHASE_SETUP",
+	"IN_DATA_PHASE_COMPLETE",
+	"OUT_DATA_PHASE_SETUP",
+	"OUT_DATA_PHASE_COMPLETE",
+	"OUT_STATUS_PHASE",
+	"IN_FAKE_STATUS_PHASE",
+	"SHUTDOWN",
+};
+
+/**
+ * struct iudma_ch_cfg - Static configuration for an IUDMA channel.
+ * @ep_num: USB endpoint number.
+ * @n_bds: Number of buffer descriptors in the ring.
+ * @ep_type: Endpoint type (control, bulk, interrupt).
+ * @dir: Direction (in, out).
+ * @n_fifo_slots: Number of FIFO entries to allocate for this channel.
+ * @max_pkt_hs: Maximum packet size in high speed mode.
+ * @max_pkt_fs: Maximum packet size in full speed mode.
+ */
+struct iudma_ch_cfg {
+	int				ep_num;
+	int				n_bds;
+	int				ep_type;
+	int				dir;
+	int				n_fifo_slots;
+	int				max_pkt_hs;
+	int				max_pkt_fs;
+};
+
+static const struct iudma_ch_cfg iudma_defaults[] = {
+
+	/* This controller was designed to support a CDC/RNDIS application.
+	   It may be possible to reconfigure some of the endpoints, but
+	   the hardware limitations (FIFO sizing and number of DMA channels)
+	   may significantly impact flexibility and/or stability.  Change
+	   these values at your own risk.
+
+	      ep_num       ep_type           n_fifo_slots    max_pkt_fs
+	idx      |  n_bds     |         dir       |  max_pkt_hs  |
+	 |       |    |       |          |        |      |       |       */
+	[0] = { -1,   4, BCMEP_CTRL, BCMEP_OUT,  32,    64,     64 },
+	[1] = {  0,   4, BCMEP_CTRL, BCMEP_OUT,  32,    64,     64 },
+	[2] = {  2,  16, BCMEP_BULK, BCMEP_OUT, 128,   512,     64 },
+	[3] = {  1,  16, BCMEP_BULK, BCMEP_IN,  128,   512,     64 },
+	[4] = {  4,   4, BCMEP_INTR, BCMEP_OUT,  32,    64,     64 },
+	[5] = {  3,   4, BCMEP_INTR, BCMEP_IN,   32,    64,     64 },
+};
+
+struct bcm63xx_udc;
+
+/**
+ * struct iudma_ch - Represents the current state of a single IUDMA channel.
+ * @ch_idx: IUDMA channel index (0 to BCM63XX_NUM_IUDMA-1).
+ * @ep_num: USB endpoint number.  -1 for ep0 RX.
+ * @enabled: Whether bcm63xx_ep_enable() has been called.
+ * @max_pkt: "Chunk size" on the USB interface.  Based on interface speed.
+ * @is_tx: true for TX, false for RX.
+ * @bep: Pointer to the associated endpoint.  NULL for ep0 RX.
+ * @udc: Reference to the device controller.
+ * @read_bd: Next buffer descriptor to reap from the hardware.
+ * @write_bd: Next BD available for a new packet.
+ * @end_bd: Points to the final BD in the ring.
+ * @n_bds_used: Number of BD entries currently occupied.
+ * @bd_ring: Base pointer to the BD ring.
+ * @bd_ring_dma: Physical (DMA) address of bd_ring.
+ * @n_bds: Total number of BDs in the ring.
+ *
+ * ep0 has two IUDMA channels (IUDMA_EP0_RXCHAN and IUDMA_EP0_TXCHAN), as it is
+ * bidirectional.  The "struct usb_ep" associated with ep0 is for TX (IN)
+ * only.
+ *
+ * Each bulk/intr endpoint has a single IUDMA channel and a single
+ * struct usb_ep.
+ */
+struct iudma_ch {
+	unsigned int			ch_idx;
+	int				ep_num;
+	bool				enabled;
+	int				max_pkt;
+	bool				is_tx;
+	struct bcm63xx_ep		*bep;
+	struct bcm63xx_udc		*udc;
+
+	struct bcm_enet_desc		*read_bd;
+	struct bcm_enet_desc		*write_bd;
+	struct bcm_enet_desc		*end_bd;
+	int				n_bds_used;
+
+	struct bcm_enet_desc		*bd_ring;
+	dma_addr_t			bd_ring_dma;
+	unsigned int			n_bds;
+};
+
+/**
+ * struct bcm63xx_ep - Internal (driver) state of a single endpoint.
+ * @ep_num: USB endpoint number.
+ * @iudma: Pointer to IUDMA channel state.
+ * @ep: USB gadget layer representation of the EP.
+ * @udc: Reference to the device controller.
+ * @queue: Linked list of outstanding requests for this EP.
+ * @halted: 1 if the EP is stalled; 0 otherwise.
+ */
+struct bcm63xx_ep {
+	unsigned int			ep_num;
+	struct iudma_ch			*iudma;
+	struct usb_ep			ep;
+	struct bcm63xx_udc		*udc;
+	struct list_head		queue;
+	unsigned			halted:1;
+};
+
+/**
+ * struct bcm63xx_req - Internal (driver) state of a single request.
+ * @queue: Links back to the EP's request list.
+ * @req: USB gadget layer representation of the request.
+ * @offset: Current byte offset into the data buffer (next byte to queue).
+ * @bd_bytes: Number of data bytes in outstanding BD entries.
+ * @iudma: IUDMA channel used for the request.
+ */
+struct bcm63xx_req {
+	struct list_head		queue;		/* ep's requests */
+	struct usb_request		req;
+	unsigned int			offset;
+	unsigned int			bd_bytes;
+	struct iudma_ch			*iudma;
+};
+
+/**
+ * struct bcm63xx_udc - Driver/hardware private context.
+ * @lock: Spinlock to mediate access to this struct, and (most) HW regs.
+ * @dev: Generic Linux device structure.
+ * @pd: Platform data (board/port info).
+ * @usbd_clk: Clock descriptor for the USB device block.
+ * @usbh_clk: Clock descriptor for the USB host block.
+ * @gadget: USB slave device.
+ * @driver: Driver for USB slave devices.
+ * @usbd_regs: Base address of the USBD/USB20D block.
+ * @iudma_regs: Base address of the USBD's associated IUDMA block.
+ * @bep: Array of endpoints, including ep0.
+ * @iudma: Array of all IUDMA channels used by this controller.
+ * @cfg: USB configuration number, from SET_CONFIGURATION wValue.
+ * @iface: USB interface number, from SET_INTERFACE wIndex.
+ * @alt_iface: USB alt interface number, from SET_INTERFACE wValue.
+ * @ep0_ctrl_req: Request object for bcm63xx_udc-initiated ep0 transactions.
+ * @ep0_ctrl_buf: Data buffer for ep0_ctrl_req.
+ * @ep0state: Current state of the ep0 state machine.
+ * @ep0_wq: Workqueue struct used to wake up the ep0 state machine.
+ * @wedgemap: Bitmap of wedged endpoints.
+ * @ep0_req_reset: USB reset is pending.
+ * @ep0_req_set_cfg: Need to spoof a SET_CONFIGURATION packet.
+ * @ep0_req_set_iface: Need to spoof a SET_INTERFACE packet.
+ * @ep0_req_shutdown: Driver is shutting down; requesting ep0 to halt activity.
+ * @ep0_req_completed: ep0 request has completed; worker has not seen it yet.
+ * @ep0_reply: Pending reply from gadget driver.
+ * @ep0_request: Outstanding ep0 request.
+ * @debugfs_root: debugfs directory: /sys/kernel/debug/<DRV_MODULE_NAME>.
+ * @debugfs_usbd: debugfs file "usbd" for controller state.
+ * @debugfs_iudma: debugfs file "usbd" for IUDMA state.
+ */
+struct bcm63xx_udc {
+	spinlock_t			lock;
+
+	struct device			*dev;
+	struct bcm63xx_usbd_platform_data *pd;
+	struct clk			*usbd_clk;
+	struct clk			*usbh_clk;
+
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+
+	void __iomem			*usbd_regs;
+	void __iomem			*iudma_regs;
+
+	struct bcm63xx_ep		bep[BCM63XX_NUM_EP];
+	struct iudma_ch			iudma[BCM63XX_NUM_IUDMA];
+
+	int				cfg;
+	int				iface;
+	int				alt_iface;
+
+	struct bcm63xx_req		ep0_ctrl_req;
+	u8				*ep0_ctrl_buf;
+
+	int				ep0state;
+	struct work_struct		ep0_wq;
+
+	unsigned long			wedgemap;
+
+	unsigned			ep0_req_reset:1;
+	unsigned			ep0_req_set_cfg:1;
+	unsigned			ep0_req_set_iface:1;
+	unsigned			ep0_req_shutdown:1;
+
+	unsigned			ep0_req_completed:1;
+	struct usb_request		*ep0_reply;
+	struct usb_request		*ep0_request;
+
+	struct dentry			*debugfs_root;
+	struct dentry			*debugfs_usbd;
+	struct dentry			*debugfs_iudma;
+};
+
+static const struct usb_ep_ops bcm63xx_udc_ep_ops;
+
+/***********************************************************************
+ * Convenience functions
+ ***********************************************************************/
+
+static inline struct bcm63xx_udc *gadget_to_udc(struct usb_gadget *g)
+{
+	return container_of(g, struct bcm63xx_udc, gadget);
+}
+
+static inline struct bcm63xx_ep *our_ep(struct usb_ep *ep)
+{
+	return container_of(ep, struct bcm63xx_ep, ep);
+}
+
+static inline struct bcm63xx_req *our_req(struct usb_request *req)
+{
+	return container_of(req, struct bcm63xx_req, req);
+}
+
+static inline u32 usbd_readl(struct bcm63xx_udc *udc, u32 off)
+{
+	return bcm_readl(udc->usbd_regs + off);
+}
+
+static inline void usbd_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
+{
+	bcm_writel(val, udc->usbd_regs + off);
+}
+
+static inline u32 usb_dma_readl(struct bcm63xx_udc *udc, u32 off)
+{
+	return bcm_readl(udc->iudma_regs + off);
+}
+
+static inline void usb_dma_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
+{
+	bcm_writel(val, udc->iudma_regs + off);
+}
+
+static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off)
+{
+	return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off);
+}
+
+static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
+{
+	bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off);
+}
+
+static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off)
+{
+	return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off);
+}
+
+static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
+{
+	bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off);
+}
+
+static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled)
+{
+	if (is_enabled) {
+		clk_enable(udc->usbh_clk);
+		clk_enable(udc->usbd_clk);
+		udelay(10);
+	} else {
+		clk_disable(udc->usbd_clk);
+		clk_disable(udc->usbh_clk);
+	}
+}
+
+/***********************************************************************
+ * Low-level IUDMA / FIFO operations
+ ***********************************************************************/
+
+/**
+ * bcm63xx_ep_dma_select - Helper function to set up the init_sel signal.
+ * @udc: Reference to the device controller.
+ * @idx: Desired init_sel value.
+ *
+ * The "init_sel" signal is used as a selection index for both endpoints
+ * and IUDMA channels.  Since these do not map 1:1, the use of this signal
+ * depends on the context.
+ */
+static void bcm63xx_ep_dma_select(struct bcm63xx_udc *udc, int idx)
+{
+	u32 val = usbd_readl(udc, USBD_CONTROL_REG);
+
+	val &= ~USBD_CONTROL_INIT_SEL_MASK;
+	val |= idx << USBD_CONTROL_INIT_SEL_SHIFT;
+	usbd_writel(udc, val, USBD_CONTROL_REG);
+}
+
+/**
+ * bcm63xx_set_stall - Enable/disable stall on one endpoint.
+ * @udc: Reference to the device controller.
+ * @bep: Endpoint on which to operate.
+ * @is_stalled: true to enable stall, false to disable.
+ *
+ * See notes in bcm63xx_update_wedge() regarding automatic clearing of
+ * halt/stall conditions.
+ */
+static void bcm63xx_set_stall(struct bcm63xx_udc *udc, struct bcm63xx_ep *bep,
+	bool is_stalled)
+{
+	u32 val;
+
+	val = USBD_STALL_UPDATE_MASK |
+		(is_stalled ? USBD_STALL_ENABLE_MASK : 0) |
+		(bep->ep_num << USBD_STALL_EPNUM_SHIFT);
+	usbd_writel(udc, val, USBD_STALL_REG);
+}
+
+/**
+ * bcm63xx_fifo_setup - (Re)initialize FIFO boundaries and settings.
+ * @udc: Reference to the device controller.
+ *
+ * These parameters depend on the USB link speed.  Settings are
+ * per-IUDMA-channel-pair.
+ */
+static void bcm63xx_fifo_setup(struct bcm63xx_udc *udc)
+{
+	int is_hs = udc->gadget.speed == USB_SPEED_HIGH;
+	u32 i, val, rx_fifo_slot, tx_fifo_slot;
+
+	/* set up FIFO boundaries and packet sizes; this is done in pairs */
+	rx_fifo_slot = tx_fifo_slot = 0;
+	for (i = 0; i < BCM63XX_NUM_IUDMA; i += 2) {
+		const struct iudma_ch_cfg *rx_cfg = &iudma_defaults[i];
+		const struct iudma_ch_cfg *tx_cfg = &iudma_defaults[i + 1];
+
+		bcm63xx_ep_dma_select(udc, i >> 1);
+
+		val = (rx_fifo_slot << USBD_RXFIFO_CONFIG_START_SHIFT) |
+			((rx_fifo_slot + rx_cfg->n_fifo_slots - 1) <<
+			 USBD_RXFIFO_CONFIG_END_SHIFT);
+		rx_fifo_slot += rx_cfg->n_fifo_slots;
+		usbd_writel(udc, val, USBD_RXFIFO_CONFIG_REG);
+		usbd_writel(udc,
+			    is_hs ? rx_cfg->max_pkt_hs : rx_cfg->max_pkt_fs,
+			    USBD_RXFIFO_EPSIZE_REG);
+
+		val = (tx_fifo_slot << USBD_TXFIFO_CONFIG_START_SHIFT) |
+			((tx_fifo_slot + tx_cfg->n_fifo_slots - 1) <<
+			 USBD_TXFIFO_CONFIG_END_SHIFT);
+		tx_fifo_slot += tx_cfg->n_fifo_slots;
+		usbd_writel(udc, val, USBD_TXFIFO_CONFIG_REG);
+		usbd_writel(udc,
+			    is_hs ? tx_cfg->max_pkt_hs : tx_cfg->max_pkt_fs,
+			    USBD_TXFIFO_EPSIZE_REG);
+
+		usbd_readl(udc, USBD_TXFIFO_EPSIZE_REG);
+	}
+}
+
+/**
+ * bcm63xx_fifo_reset_ep - Flush a single endpoint's FIFO.
+ * @udc: Reference to the device controller.
+ * @ep_num: Endpoint number.
+ */
+static void bcm63xx_fifo_reset_ep(struct bcm63xx_udc *udc, int ep_num)
+{
+	u32 val;
+
+	bcm63xx_ep_dma_select(udc, ep_num);
+
+	val = usbd_readl(udc, USBD_CONTROL_REG);
+	val |= USBD_CONTROL_FIFO_RESET_MASK;
+	usbd_writel(udc, val, USBD_CONTROL_REG);
+	usbd_readl(udc, USBD_CONTROL_REG);
+}
+
+/**
+ * bcm63xx_fifo_reset - Flush all hardware FIFOs.
+ * @udc: Reference to the device controller.
+ */
+static void bcm63xx_fifo_reset(struct bcm63xx_udc *udc)
+{
+	int i;
+
+	for (i = 0; i < BCM63XX_NUM_FIFO_PAIRS; i++)
+		bcm63xx_fifo_reset_ep(udc, i);
+}
+
+/**
+ * bcm63xx_ep_init - Initial (one-time) endpoint initialization.
+ * @udc: Reference to the device controller.
+ */
+static void bcm63xx_ep_init(struct bcm63xx_udc *udc)
+{
+	u32 i, val;
+
+	for (i = 0; i < BCM63XX_NUM_IUDMA; i++) {
+		const struct iudma_ch_cfg *cfg = &iudma_defaults[i];
+
+		if (cfg->ep_num < 0)
+			continue;
+
+		bcm63xx_ep_dma_select(udc, cfg->ep_num);
+		val = (cfg->ep_type << USBD_EPNUM_TYPEMAP_TYPE_SHIFT) |
+			((i >> 1) << USBD_EPNUM_TYPEMAP_DMA_CH_SHIFT);
+		usbd_writel(udc, val, USBD_EPNUM_TYPEMAP_REG);
+	}
+}
+
+/**
+ * bcm63xx_ep_setup - Configure per-endpoint settings.
+ * @udc: Reference to the device controller.
+ *
+ * This needs to be rerun if the speed/cfg/intf/altintf changes.
+ */
+static void bcm63xx_ep_setup(struct bcm63xx_udc *udc)
+{
+	u32 val, i;
+
+	usbd_writel(udc, USBD_CSR_SETUPADDR_DEF, USBD_CSR_SETUPADDR_REG);
+
+	for (i = 0; i < BCM63XX_NUM_IUDMA; i++) {
+		const struct iudma_ch_cfg *cfg = &iudma_defaults[i];
+		int max_pkt = udc->gadget.speed == USB_SPEED_HIGH ?
+			      cfg->max_pkt_hs : cfg->max_pkt_fs;
+		int idx = cfg->ep_num;
+
+		udc->iudma[i].max_pkt = max_pkt;
+
+		if (idx < 0)
+			continue;
+		udc->bep[idx].ep.maxpacket = max_pkt;
+
+		val = (idx << USBD_CSR_EP_LOG_SHIFT) |
+		      (cfg->dir << USBD_CSR_EP_DIR_SHIFT) |
+		      (cfg->ep_type << USBD_CSR_EP_TYPE_SHIFT) |
+		      (udc->cfg << USBD_CSR_EP_CFG_SHIFT) |
+		      (udc->iface << USBD_CSR_EP_IFACE_SHIFT) |
+		      (udc->alt_iface << USBD_CSR_EP_ALTIFACE_SHIFT) |
+		      (max_pkt << USBD_CSR_EP_MAXPKT_SHIFT);
+		usbd_writel(udc, val, USBD_CSR_EP_REG(idx));
+	}
+}
+
+/**
+ * iudma_write - Queue a single IUDMA transaction.
+ * @udc: Reference to the device controller.
+ * @iudma: IUDMA channel to use.
+ * @breq: Request containing the transaction data.
+ *
+ * For RX IUDMA, this will queue a single buffer descriptor, as RX IUDMA
+ * does not honor SOP/EOP so the handling of multiple buffers is ambiguous.
+ * So iudma_write() may be called several times to fulfill a single
+ * usb_request.
+ *
+ * For TX IUDMA, this can queue multiple buffer descriptors if needed.
+ */
+static void iudma_write(struct bcm63xx_udc *udc, struct iudma_ch *iudma,
+	struct bcm63xx_req *breq)
+{
+	int first_bd = 1, last_bd = 0, extra_zero_pkt = 0;
+	unsigned int bytes_left = breq->req.length - breq->offset;
+	const int max_bd_bytes = !irq_coalesce && !iudma->is_tx ?
+		iudma->max_pkt : IUDMA_MAX_FRAGMENT;
+
+	iudma->n_bds_used = 0;
+	breq->bd_bytes = 0;
+	breq->iudma = iudma;
+
+	if ((bytes_left % iudma->max_pkt == 0) && bytes_left && breq->req.zero)
+		extra_zero_pkt = 1;
+
+	do {
+		struct bcm_enet_desc *d = iudma->write_bd;
+		u32 dmaflags = 0;
+		unsigned int n_bytes;
+
+		if (d == iudma->end_bd) {
+			dmaflags |= DMADESC_WRAP_MASK;
+			iudma->write_bd = iudma->bd_ring;
+		} else {
+			iudma->write_bd++;
+		}
+		iudma->n_bds_used++;
+
+		n_bytes = min_t(int, bytes_left, max_bd_bytes);
+		if (n_bytes)
+			dmaflags |= n_bytes << DMADESC_LENGTH_SHIFT;
+		else
+			dmaflags |= (1 << DMADESC_LENGTH_SHIFT) |
+				    DMADESC_USB_ZERO_MASK;
+
+		dmaflags |= DMADESC_OWNER_MASK;
+		if (first_bd) {
+			dmaflags |= DMADESC_SOP_MASK;
+			first_bd = 0;
+		}
+
+		/*
+		 * extra_zero_pkt forces one more iteration through the loop
+		 * after all data is queued up, to send the zero packet
+		 */
+		if (extra_zero_pkt && !bytes_left)
+			extra_zero_pkt = 0;
+
+		if (!iudma->is_tx || iudma->n_bds_used == iudma->n_bds ||
+		    (n_bytes == bytes_left && !extra_zero_pkt)) {
+			last_bd = 1;
+			dmaflags |= DMADESC_EOP_MASK;
+		}
+
+		d->address = breq->req.dma + breq->offset;
+		mb();
+		d->len_stat = dmaflags;
+
+		breq->offset += n_bytes;
+		breq->bd_bytes += n_bytes;
+		bytes_left -= n_bytes;
+	} while (!last_bd);
+
+	usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK,
+			ENETDMAC_CHANCFG_REG(iudma->ch_idx));
+}
+
+/**
+ * iudma_read - Check for IUDMA buffer completion.
+ * @udc: Reference to the device controller.
+ * @iudma: IUDMA channel to use.
+ *
+ * This checks to see if ALL of the outstanding BDs on the DMA channel
+ * have been filled.  If so, it returns the actual transfer length;
+ * otherwise it returns -EBUSY.
+ */
+static int iudma_read(struct bcm63xx_udc *udc, struct iudma_ch *iudma)
+{
+	int i, actual_len = 0;
+	struct bcm_enet_desc *d = iudma->read_bd;
+
+	if (!iudma->n_bds_used)
+		return -EINVAL;
+
+	for (i = 0; i < iudma->n_bds_used; i++) {
+		u32 dmaflags;
+
+		dmaflags = d->len_stat;
+
+		if (dmaflags & DMADESC_OWNER_MASK)
+			return -EBUSY;
+
+		actual_len += (dmaflags & DMADESC_LENGTH_MASK) >>
+			      DMADESC_LENGTH_SHIFT;
+		if (d == iudma->end_bd)
+			d = iudma->bd_ring;
+		else
+			d++;
+	}
+
+	iudma->read_bd = d;
+	iudma->n_bds_used = 0;
+	return actual_len;
+}
+
+/**
+ * iudma_reset_channel - Stop DMA on a single channel.
+ * @udc: Reference to the device controller.
+ * @iudma: IUDMA channel to reset.
+ */
+static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma)
+{
+	int timeout = IUDMA_RESET_TIMEOUT_US;
+	struct bcm_enet_desc *d;
+	int ch_idx = iudma->ch_idx;
+
+	if (!iudma->is_tx)
+		bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num));
+
+	/* stop DMA, then wait for the hardware to wrap up */
+	usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG(ch_idx));
+
+	while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)) &
+				   ENETDMAC_CHANCFG_EN_MASK) {
+		udelay(1);
+
+		/* repeatedly flush the FIFO data until the BD completes */
+		if (iudma->is_tx && iudma->ep_num >= 0)
+			bcm63xx_fifo_reset_ep(udc, iudma->ep_num);
+
+		if (!timeout--) {
+			dev_err(udc->dev, "can't reset IUDMA channel %d\n",
+				ch_idx);
+			break;
+		}
+		if (timeout == IUDMA_RESET_TIMEOUT_US / 2) {
+			dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n",
+				 ch_idx);
+			usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK,
+					ENETDMAC_CHANCFG_REG(ch_idx));
+		}
+	}
+	usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG(ch_idx));
+
+	/* don't leave "live" HW-owned entries for the next guy to step on */
+	for (d = iudma->bd_ring; d <= iudma->end_bd; d++)
+		d->len_stat = 0;
+	mb();
+
+	iudma->read_bd = iudma->write_bd = iudma->bd_ring;
+	iudma->n_bds_used = 0;
+
+	/* set up IRQs, UBUS burst size, and BD base for this channel */
+	usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
+			ENETDMAC_IRMASK_REG(ch_idx));
+	usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG(ch_idx));
+
+	usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG(ch_idx));
+	usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG(ch_idx));
+}
+
+/**
+ * iudma_init_channel - One-time IUDMA channel initialization.
+ * @udc: Reference to the device controller.
+ * @ch_idx: Channel to initialize.
+ */
+static int iudma_init_channel(struct bcm63xx_udc *udc, unsigned int ch_idx)
+{
+	struct iudma_ch *iudma = &udc->iudma[ch_idx];
+	const struct iudma_ch_cfg *cfg = &iudma_defaults[ch_idx];
+	unsigned int n_bds = cfg->n_bds;
+	struct bcm63xx_ep *bep = NULL;
+
+	iudma->ep_num = cfg->ep_num;
+	iudma->ch_idx = ch_idx;
+	iudma->is_tx = !!(ch_idx & 0x01);
+	if (iudma->ep_num >= 0) {
+		bep = &udc->bep[iudma->ep_num];
+		bep->iudma = iudma;
+		INIT_LIST_HEAD(&bep->queue);
+	}
+
+	iudma->bep = bep;
+	iudma->udc = udc;
+
+	/* ep0 is always active; others are controlled by the gadget driver */
+	if (iudma->ep_num <= 0)
+		iudma->enabled = true;
+
+	iudma->n_bds = n_bds;
+	iudma->bd_ring = dmam_alloc_coherent(udc->dev,
+		n_bds * sizeof(struct bcm_enet_desc),
+		&iudma->bd_ring_dma, GFP_KERNEL);
+	if (!iudma->bd_ring)
+		return -ENOMEM;
+	iudma->end_bd = &iudma->bd_ring[n_bds - 1];
+
+	return 0;
+}
+
+/**
+ * iudma_init - One-time initialization of all IUDMA channels.
+ * @udc: Reference to the device controller.
+ *
+ * Enable DMA, flush channels, and enable global IUDMA IRQs.
+ */
+static int iudma_init(struct bcm63xx_udc *udc)
+{
+	int i, rc;
+
+	usb_dma_writel(udc, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
+
+	for (i = 0; i < BCM63XX_NUM_IUDMA; i++) {
+		rc = iudma_init_channel(udc, i);
+		if (rc)
+			return rc;
+		iudma_reset_channel(udc, &udc->iudma[i]);
+	}
+
+	usb_dma_writel(udc, BIT(BCM63XX_NUM_IUDMA)-1, ENETDMA_GLB_IRQMASK_REG);
+	return 0;
+}
+
+/**
+ * iudma_uninit - Uninitialize IUDMA channels.
+ * @udc: Reference to the device controller.
+ *
+ * Kill global IUDMA IRQs, flush channels, and kill DMA.
+ */
+static void iudma_uninit(struct bcm63xx_udc *udc)
+{
+	int i;
+
+	usb_dma_writel(udc, 0, ENETDMA_GLB_IRQMASK_REG);
+
+	for (i = 0; i < BCM63XX_NUM_IUDMA; i++)
+		iudma_reset_channel(udc, &udc->iudma[i]);
+
+	usb_dma_writel(udc, 0, ENETDMA_CFG_REG);
+}
+
+/***********************************************************************
+ * Other low-level USBD operations
+ ***********************************************************************/
+
+/**
+ * bcm63xx_set_ctrl_irqs - Mask/unmask control path interrupts.
+ * @udc: Reference to the device controller.
+ * @enable_irqs: true to enable, false to disable.
+ */
+static void bcm63xx_set_ctrl_irqs(struct bcm63xx_udc *udc, bool enable_irqs)
+{
+	u32 val;
+
+	usbd_writel(udc, 0, USBD_STATUS_REG);
+
+	val = BIT(USBD_EVENT_IRQ_USB_RESET) |
+	      BIT(USBD_EVENT_IRQ_SETUP) |
+	      BIT(USBD_EVENT_IRQ_SETCFG) |
+	      BIT(USBD_EVENT_IRQ_SETINTF) |
+	      BIT(USBD_EVENT_IRQ_USB_LINK);
+	usbd_writel(udc, enable_irqs ? val : 0, USBD_EVENT_IRQ_MASK_REG);
+	usbd_writel(udc, val, USBD_EVENT_IRQ_STATUS_REG);
+}
+
+/**
+ * bcm63xx_select_phy_mode - Select between USB device and host mode.
+ * @udc: Reference to the device controller.
+ * @is_device: true for device, false for host.
+ *
+ * This should probably be reworked to use the drivers/usb/otg
+ * infrastructure.
+ *
+ * By default, the AFE/pullups are disabled in device mode, until
+ * bcm63xx_select_pullup() is called.
+ */
+static void bcm63xx_select_phy_mode(struct bcm63xx_udc *udc, bool is_device)
+{
+	u32 val, portmask = BIT(udc->pd->port_no);
+
+	if (BCMCPU_IS_6328()) {
+		/* configure pinmux to sense VBUS signal */
+		val = bcm_gpio_readl(GPIO_PINMUX_OTHR_REG);
+		val &= ~GPIO_PINMUX_OTHR_6328_USB_MASK;
+		val |= is_device ? GPIO_PINMUX_OTHR_6328_USB_DEV :
+			       GPIO_PINMUX_OTHR_6328_USB_HOST;
+		bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG);
+	}
+
+	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
+	if (is_device) {
+		val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
+		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+	} else {
+		val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
+		val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+	}
+	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
+
+	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
+	if (is_device)
+		val |= USBH_PRIV_SWAP_USBD_MASK;
+	else
+		val &= ~USBH_PRIV_SWAP_USBD_MASK;
+	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
+}
+
+/**
+ * bcm63xx_select_pullup - Enable/disable the pullup on D+
+ * @udc: Reference to the device controller.
+ * @is_on: true to enable the pullup, false to disable.
+ *
+ * If the pullup is active, the host will sense a FS/HS device connected to
+ * the port.  If the pullup is inactive, the host will think the USB
+ * device has been disconnected.
+ */
+static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on)
+{
+	u32 val, portmask = BIT(udc->pd->port_no);
+
+	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
+	if (is_on)
+		val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+	else
+		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
+}
+
+/**
+ * bcm63xx_uninit_udc_hw - Shut down the hardware prior to driver removal.
+ * @udc: Reference to the device controller.
+ *
+ * This just masks the IUDMA IRQs and releases the clocks.  It is assumed
+ * that bcm63xx_udc_stop() has already run, and the clocks are stopped.
+ */
+static void bcm63xx_uninit_udc_hw(struct bcm63xx_udc *udc)
+{
+	set_clocks(udc, true);
+	iudma_uninit(udc);
+	set_clocks(udc, false);
+
+	clk_put(udc->usbd_clk);
+	clk_put(udc->usbh_clk);
+}
+
+/**
+ * bcm63xx_init_udc_hw - Initialize the controller hardware and data structures.
+ * @udc: Reference to the device controller.
+ */
+static int bcm63xx_init_udc_hw(struct bcm63xx_udc *udc)
+{
+	int i, rc = 0;
+	u32 val;
+
+	udc->ep0_ctrl_buf = devm_kzalloc(udc->dev, BCM63XX_MAX_CTRL_PKT,
+					 GFP_KERNEL);
+	if (!udc->ep0_ctrl_buf)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&udc->gadget.ep_list);
+	for (i = 0; i < BCM63XX_NUM_EP; i++) {
+		struct bcm63xx_ep *bep = &udc->bep[i];
+
+		bep->ep.name = bcm63xx_ep_name[i];
+		bep->ep_num = i;
+		bep->ep.ops = &bcm63xx_udc_ep_ops;
+		list_add_tail(&bep->ep.ep_list, &udc->gadget.ep_list);
+		bep->halted = 0;
+		bep->ep.maxpacket = BCM63XX_MAX_CTRL_PKT;
+		bep->udc = udc;
+		bep->ep.desc = NULL;
+		INIT_LIST_HEAD(&bep->queue);
+	}
+
+	udc->gadget.ep0 = &udc->bep[0].ep;
+	list_del(&udc->bep[0].ep.ep_list);
+
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->ep0state = EP0_SHUTDOWN;
+
+	udc->usbh_clk = clk_get(udc->dev, "usbh");
+	if (IS_ERR(udc->usbh_clk))
+		return -EIO;
+
+	udc->usbd_clk = clk_get(udc->dev, "usbd");
+	if (IS_ERR(udc->usbd_clk)) {
+		clk_put(udc->usbh_clk);
+		return -EIO;
+	}
+
+	set_clocks(udc, true);
+
+	val = USBD_CONTROL_AUTO_CSRS_MASK |
+	      USBD_CONTROL_DONE_CSRS_MASK |
+	      (irq_coalesce ? USBD_CONTROL_RXZSCFG_MASK : 0);
+	usbd_writel(udc, val, USBD_CONTROL_REG);
+
+	val = USBD_STRAPS_APP_SELF_PWR_MASK |
+	      USBD_STRAPS_APP_RAM_IF_MASK |
+	      USBD_STRAPS_APP_CSRPRGSUP_MASK |
+	      USBD_STRAPS_APP_8BITPHY_MASK |
+	      USBD_STRAPS_APP_RMTWKUP_MASK;
+
+	if (udc->gadget.max_speed == USB_SPEED_HIGH)
+		val |= (BCM63XX_SPD_HIGH << USBD_STRAPS_SPEED_SHIFT);
+	else
+		val |= (BCM63XX_SPD_FULL << USBD_STRAPS_SPEED_SHIFT);
+	usbd_writel(udc, val, USBD_STRAPS_REG);
+
+	bcm63xx_set_ctrl_irqs(udc, false);
+
+	usbd_writel(udc, 0, USBD_EVENT_IRQ_CFG_LO_REG);
+
+	val = USBD_EVENT_IRQ_CFG_FALLING(USBD_EVENT_IRQ_ENUM_ON) |
+	      USBD_EVENT_IRQ_CFG_FALLING(USBD_EVENT_IRQ_SET_CSRS);
+	usbd_writel(udc, val, USBD_EVENT_IRQ_CFG_HI_REG);
+
+	rc = iudma_init(udc);
+	set_clocks(udc, false);
+	if (rc)
+		bcm63xx_uninit_udc_hw(udc);
+
+	return 0;
+}
+
+/***********************************************************************
+ * Standard EP gadget operations
+ ***********************************************************************/
+
+/**
+ * bcm63xx_ep_enable - Enable one endpoint.
+ * @ep: Endpoint to enable.
+ * @desc: Contains max packet, direction, etc.
+ *
+ * Most of the endpoint parameters are fixed in this controller, so there
+ * isn't much for this function to do.
+ */
+static int bcm63xx_ep_enable(struct usb_ep *ep,
+	const struct usb_endpoint_descriptor *desc)
+{
+	struct bcm63xx_ep *bep = our_ep(ep);
+	struct bcm63xx_udc *udc = bep->udc;
+	struct iudma_ch *iudma = bep->iudma;
+	unsigned long flags;
+
+	if (!ep || !desc || ep->name == bcm63xx_ep0name)
+		return -EINVAL;
+
+	if (!udc->driver)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (iudma->enabled) {
+		spin_unlock_irqrestore(&udc->lock, flags);
+		return -EINVAL;
+	}
+
+	iudma->enabled = true;
+	BUG_ON(!list_empty(&bep->queue));
+
+	iudma_reset_channel(udc, iudma);
+
+	bep->halted = 0;
+	bcm63xx_set_stall(udc, bep, false);
+	clear_bit(bep->ep_num, &udc->wedgemap);
+
+	ep->desc = desc;
+	ep->maxpacket = usb_endpoint_maxp(desc);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+/**
+ * bcm63xx_ep_disable - Disable one endpoint.
+ * @ep: Endpoint to disable.
+ */
+static int bcm63xx_ep_disable(struct usb_ep *ep)
+{
+	struct bcm63xx_ep *bep = our_ep(ep);
+	struct bcm63xx_udc *udc = bep->udc;
+	struct iudma_ch *iudma = bep->iudma;
+	struct list_head *pos, *n;
+	unsigned long flags;
+
+	if (!ep || !ep->desc)
+		return -EINVAL;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (!iudma->enabled) {
+		spin_unlock_irqrestore(&udc->lock, flags);
+		return -EINVAL;
+	}
+	iudma->enabled = false;
+
+	iudma_reset_channel(udc, iudma);
+
+	if (!list_empty(&bep->queue)) {
+		list_for_each_safe(pos, n, &bep->queue) {
+			struct bcm63xx_req *breq =
+				list_entry(pos, struct bcm63xx_req, queue);
+
+			usb_gadget_unmap_request(&udc->gadget, &breq->req,
+						 iudma->is_tx);
+			list_del(&breq->queue);
+			breq->req.status = -ESHUTDOWN;
+
+			spin_unlock_irqrestore(&udc->lock, flags);
+			breq->req.complete(&iudma->bep->ep, &breq->req);
+			spin_lock_irqsave(&udc->lock, flags);
+		}
+	}
+	ep->desc = NULL;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+/**
+ * bcm63xx_udc_alloc_request - Allocate a new request.
+ * @ep: Endpoint associated with the request.
+ * @mem_flags: Flags to pass to kzalloc().
+ */
+static struct usb_request *bcm63xx_udc_alloc_request(struct usb_ep *ep,
+	gfp_t mem_flags)
+{
+	struct bcm63xx_req *breq;
+
+	breq = kzalloc(sizeof(*breq), mem_flags);
+	if (!breq)
+		return NULL;
+	return &breq->req;
+}
+
+/**
+ * bcm63xx_udc_free_request - Free a request.
+ * @ep: Endpoint associated with the request.
+ * @req: Request to free.
+ */
+static void bcm63xx_udc_free_request(struct usb_ep *ep,
+	struct usb_request *req)
+{
+	struct bcm63xx_req *breq = our_req(req);
+	kfree(breq);
+}
+
+/**
+ * bcm63xx_udc_queue - Queue up a new request.
+ * @ep: Endpoint associated with the request.
+ * @req: Request to add.
+ * @mem_flags: Unused.
+ *
+ * If the queue is empty, start this request immediately.  Otherwise, add
+ * it to the list.
+ *
+ * ep0 replies are sent through this function from the gadget driver, but
+ * they are treated differently because they need to be handled by the ep0
+ * state machine.  (Sometimes they are replies to control requests that
+ * were spoofed by this driver, and so they shouldn't be transmitted at all.)
+ */
+static int bcm63xx_udc_queue(struct usb_ep *ep, struct usb_request *req,
+	gfp_t mem_flags)
+{
+	struct bcm63xx_ep *bep = our_ep(ep);
+	struct bcm63xx_udc *udc = bep->udc;
+	struct bcm63xx_req *breq = our_req(req);
+	unsigned long flags;
+	int rc = 0;
+
+	if (unlikely(!req || !req->complete || !req->buf || !ep))
+		return -EINVAL;
+
+	req->actual = 0;
+	req->status = 0;
+	breq->offset = 0;
+
+	if (bep == &udc->bep[0]) {
+		/* only one reply per request, please */
+		if (udc->ep0_reply)
+			return -EINVAL;
+
+		udc->ep0_reply = req;
+		schedule_work(&udc->ep0_wq);
+		return 0;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (!bep->iudma->enabled) {
+		rc = -ESHUTDOWN;
+		goto out;
+	}
+
+	rc = usb_gadget_map_request(&udc->gadget, req, bep->iudma->is_tx);
+	if (rc == 0) {
+		list_add_tail(&breq->queue, &bep->queue);
+		if (list_is_singular(&bep->queue))
+			iudma_write(udc, bep->iudma, breq);
+	}
+
+out:
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return rc;
+}
+
+/**
+ * bcm63xx_udc_dequeue - Remove a pending request from the queue.
+ * @ep: Endpoint associated with the request.
+ * @req: Request to remove.
+ *
+ * If the request is not at the head of the queue, this is easy - just nuke
+ * it.  If the request is at the head of the queue, we'll need to stop the
+ * DMA transaction and then queue up the successor.
+ */
+static int bcm63xx_udc_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	struct bcm63xx_ep *bep = our_ep(ep);
+	struct bcm63xx_udc *udc = bep->udc;
+	struct bcm63xx_req *breq = our_req(req), *cur;
+	unsigned long flags;
+	int rc = 0;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (list_empty(&bep->queue)) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	cur = list_first_entry(&bep->queue, struct bcm63xx_req, queue);
+	usb_gadget_unmap_request(&udc->gadget, &breq->req, bep->iudma->is_tx);
+
+	if (breq == cur) {
+		iudma_reset_channel(udc, bep->iudma);
+		list_del(&breq->queue);
+
+		if (!list_empty(&bep->queue)) {
+			struct bcm63xx_req *next;
+
+			next = list_first_entry(&bep->queue,
+				struct bcm63xx_req, queue);
+			iudma_write(udc, bep->iudma, next);
+		}
+	} else {
+		list_del(&breq->queue);
+	}
+
+out:
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	req->status = -ESHUTDOWN;
+	req->complete(ep, req);
+
+	return rc;
+}
+
+/**
+ * bcm63xx_udc_set_halt - Enable/disable STALL flag in the hardware.
+ * @ep: Endpoint to halt.
+ * @value: Zero to clear halt; nonzero to set halt.
+ *
+ * See comments in bcm63xx_update_wedge().
+ */
+static int bcm63xx_udc_set_halt(struct usb_ep *ep, int value)
+{
+	struct bcm63xx_ep *bep = our_ep(ep);
+	struct bcm63xx_udc *udc = bep->udc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	bcm63xx_set_stall(udc, bep, !!value);
+	bep->halted = value;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/**
+ * bcm63xx_udc_set_wedge - Stall the endpoint until the next reset.
+ * @ep: Endpoint to wedge.
+ *
+ * See comments in bcm63xx_update_wedge().
+ */
+static int bcm63xx_udc_set_wedge(struct usb_ep *ep)
+{
+	struct bcm63xx_ep *bep = our_ep(ep);
+	struct bcm63xx_udc *udc = bep->udc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	set_bit(bep->ep_num, &udc->wedgemap);
+	bcm63xx_set_stall(udc, bep, true);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static const struct usb_ep_ops bcm63xx_udc_ep_ops = {
+	.enable		= bcm63xx_ep_enable,
+	.disable	= bcm63xx_ep_disable,
+
+	.alloc_request	= bcm63xx_udc_alloc_request,
+	.free_request	= bcm63xx_udc_free_request,
+
+	.queue		= bcm63xx_udc_queue,
+	.dequeue	= bcm63xx_udc_dequeue,
+
+	.set_halt	= bcm63xx_udc_set_halt,
+	.set_wedge	= bcm63xx_udc_set_wedge,
+};
+
+/***********************************************************************
+ * EP0 handling
+ ***********************************************************************/
+
+/**
+ * bcm63xx_ep0_setup_callback - Drop spinlock to invoke ->setup callback.
+ * @udc: Reference to the device controller.
+ * @ctrl: 8-byte SETUP request.
+ */
+static int bcm63xx_ep0_setup_callback(struct bcm63xx_udc *udc,
+	struct usb_ctrlrequest *ctrl)
+{
+	int rc;
+
+	spin_unlock_irq(&udc->lock);
+	rc = udc->driver->setup(&udc->gadget, ctrl);
+	spin_lock_irq(&udc->lock);
+	return rc;
+}
+
+/**
+ * bcm63xx_ep0_spoof_set_cfg - Synthesize a SET_CONFIGURATION request.
+ * @udc: Reference to the device controller.
+ *
+ * Many standard requests are handled automatically in the hardware, but
+ * we still need to pass them to the gadget driver so that it can
+ * reconfigure the interfaces/endpoints if necessary.
+ *
+ * Unfortunately we are not able to send a STALL response if the host
+ * requests an invalid configuration.  If this happens, we'll have to be
+ * content with printing a warning.
+ */
+static int bcm63xx_ep0_spoof_set_cfg(struct bcm63xx_udc *udc)
+{
+	struct usb_ctrlrequest ctrl;
+	int rc;
+
+	ctrl.bRequestType = USB_DIR_OUT | USB_RECIP_DEVICE;
+	ctrl.bRequest = USB_REQ_SET_CONFIGURATION;
+	ctrl.wValue = cpu_to_le16(udc->cfg);
+	ctrl.wIndex = 0;
+	ctrl.wLength = 0;
+
+	rc = bcm63xx_ep0_setup_callback(udc, &ctrl);
+	if (rc < 0) {
+		dev_warn_ratelimited(udc->dev,
+			"hardware auto-acked bad SET_CONFIGURATION(%d) request\n",
+			udc->cfg);
+	}
+	return rc;
+}
+
+/**
+ * bcm63xx_ep0_spoof_set_iface - Synthesize a SET_INTERFACE request.
+ * @udc: Reference to the device controller.
+ */
+static int bcm63xx_ep0_spoof_set_iface(struct bcm63xx_udc *udc)
+{
+	struct usb_ctrlrequest ctrl;
+	int rc;
+
+	ctrl.bRequestType = USB_DIR_OUT | USB_RECIP_INTERFACE;
+	ctrl.bRequest = USB_REQ_SET_INTERFACE;
+	ctrl.wValue = cpu_to_le16(udc->alt_iface);
+	ctrl.wIndex = cpu_to_le16(udc->iface);
+	ctrl.wLength = 0;
+
+	rc = bcm63xx_ep0_setup_callback(udc, &ctrl);
+	if (rc < 0) {
+		dev_warn_ratelimited(udc->dev,
+			"hardware auto-acked bad SET_INTERFACE(%d,%d) request\n",
+			udc->iface, udc->alt_iface);
+	}
+	return rc;
+}
+
+/**
+ * bcm63xx_ep0_map_write - dma_map and iudma_write a single request.
+ * @udc: Reference to the device controller.
+ * @ch_idx: IUDMA channel number.
+ * @req: USB gadget layer representation of the request.
+ */
+static void bcm63xx_ep0_map_write(struct bcm63xx_udc *udc, int ch_idx,
+	struct usb_request *req)
+{
+	struct bcm63xx_req *breq = our_req(req);
+	struct iudma_ch *iudma = &udc->iudma[ch_idx];
+
+	BUG_ON(udc->ep0_request);
+	udc->ep0_request = req;
+
+	req->actual = 0;
+	breq->offset = 0;
+	usb_gadget_map_request(&udc->gadget, req, iudma->is_tx);
+	iudma_write(udc, iudma, breq);
+}
+
+/**
+ * bcm63xx_ep0_complete - Set completion status and "stage" the callback.
+ * @udc: Reference to the device controller.
+ * @req: USB gadget layer representation of the request.
+ * @status: Status to return to the gadget driver.
+ */
+static void bcm63xx_ep0_complete(struct bcm63xx_udc *udc,
+	struct usb_request *req, int status)
+{
+	req->status = status;
+	if (status)
+		req->actual = 0;
+	if (req->complete) {
+		spin_unlock_irq(&udc->lock);
+		req->complete(&udc->bep[0].ep, req);
+		spin_lock_irq(&udc->lock);
+	}
+}
+
+/**
+ * bcm63xx_ep0_nuke_reply - Abort request from the gadget driver due to
+ *   reset/shutdown.
+ * @udc: Reference to the device controller.
+ * @is_tx: Nonzero for TX (IN), zero for RX (OUT).
+ */
+static void bcm63xx_ep0_nuke_reply(struct bcm63xx_udc *udc, int is_tx)
+{
+	struct usb_request *req = udc->ep0_reply;
+
+	udc->ep0_reply = NULL;
+	usb_gadget_unmap_request(&udc->gadget, req, is_tx);
+	if (udc->ep0_request == req) {
+		udc->ep0_req_completed = 0;
+		udc->ep0_request = NULL;
+	}
+	bcm63xx_ep0_complete(udc, req, -ESHUTDOWN);
+}
+
+/**
+ * bcm63xx_ep0_read_complete - Close out the pending ep0 request; return
+ *   transfer len.
+ * @udc: Reference to the device controller.
+ */
+static int bcm63xx_ep0_read_complete(struct bcm63xx_udc *udc)
+{
+	struct usb_request *req = udc->ep0_request;
+
+	udc->ep0_req_completed = 0;
+	udc->ep0_request = NULL;
+
+	return req->actual;
+}
+
+/**
+ * bcm63xx_ep0_internal_request - Helper function to submit an ep0 request.
+ * @udc: Reference to the device controller.
+ * @ch_idx: IUDMA channel number.
+ * @length: Number of bytes to TX/RX.
+ *
+ * Used for simple transfers performed by the ep0 worker.  This will always
+ * use ep0_ctrl_req / ep0_ctrl_buf.
+ */
+static void bcm63xx_ep0_internal_request(struct bcm63xx_udc *udc, int ch_idx,
+	int length)
+{
+	struct usb_request *req = &udc->ep0_ctrl_req.req;
+
+	req->buf = udc->ep0_ctrl_buf;
+	req->length = length;
+	req->complete = NULL;
+
+	bcm63xx_ep0_map_write(udc, ch_idx, req);
+}
+
+/**
+ * bcm63xx_ep0_do_setup - Parse new SETUP packet and decide how to handle it.
+ * @udc: Reference to the device controller.
+ *
+ * EP0_IDLE probably shouldn't ever happen.  EP0_REQUEUE means we're ready
+ * for the next packet.  Anything else means the transaction requires multiple
+ * stages of handling.
+ */
+static enum bcm63xx_ep0_state bcm63xx_ep0_do_setup(struct bcm63xx_udc *udc)
+{
+	int rc;
+	struct usb_ctrlrequest *ctrl = (void *)udc->ep0_ctrl_buf;
+
+	rc = bcm63xx_ep0_read_complete(udc);
+
+	if (rc < 0) {
+		dev_err(udc->dev, "missing SETUP packet\n");
+		return EP0_IDLE;
+	}
+
+	/*
+	 * Handle 0-byte IN STATUS acknowledgement.  The hardware doesn't
+	 * ALWAYS deliver these 100% of the time, so if we happen to see one,
+	 * just throw it away.
+	 */
+	if (rc == 0)
+		return EP0_REQUEUE;
+
+	/* Drop malformed SETUP packets */
+	if (rc != sizeof(*ctrl)) {
+		dev_warn_ratelimited(udc->dev,
+			"malformed SETUP packet (%d bytes)\n", rc);
+		return EP0_REQUEUE;
+	}
+
+	/* Process new SETUP packet arriving on ep0 */
+	rc = bcm63xx_ep0_setup_callback(udc, ctrl);
+	if (rc < 0) {
+		bcm63xx_set_stall(udc, &udc->bep[0], true);
+		return EP0_REQUEUE;
+	}
+
+	if (!ctrl->wLength)
+		return EP0_REQUEUE;
+	else if (ctrl->bRequestType & USB_DIR_IN)
+		return EP0_IN_DATA_PHASE_SETUP;
+	else
+		return EP0_OUT_DATA_PHASE_SETUP;
+}
+
+/**
+ * bcm63xx_ep0_do_idle - Check for outstanding requests if ep0 is idle.
+ * @udc: Reference to the device controller.
+ *
+ * In state EP0_IDLE, the RX descriptor is either pending, or has been
+ * filled with a SETUP packet from the host.  This function handles new
+ * SETUP packets, control IRQ events (which can generate fake SETUP packets),
+ * and reset/shutdown events.
+ *
+ * Returns 0 if work was done; -EAGAIN if nothing to do.
+ */
+static int bcm63xx_ep0_do_idle(struct bcm63xx_udc *udc)
+{
+	if (udc->ep0_req_reset) {
+		udc->ep0_req_reset = 0;
+	} else if (udc->ep0_req_set_cfg) {
+		udc->ep0_req_set_cfg = 0;
+		if (bcm63xx_ep0_spoof_set_cfg(udc) >= 0)
+			udc->ep0state = EP0_IN_FAKE_STATUS_PHASE;
+	} else if (udc->ep0_req_set_iface) {
+		udc->ep0_req_set_iface = 0;
+		if (bcm63xx_ep0_spoof_set_iface(udc) >= 0)
+			udc->ep0state = EP0_IN_FAKE_STATUS_PHASE;
+	} else if (udc->ep0_req_completed) {
+		udc->ep0state = bcm63xx_ep0_do_setup(udc);
+		return udc->ep0state == EP0_IDLE ? -EAGAIN : 0;
+	} else if (udc->ep0_req_shutdown) {
+		udc->ep0_req_shutdown = 0;
+		udc->ep0_req_completed = 0;
+		udc->ep0_request = NULL;
+		iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_RXCHAN]);
+		usb_gadget_unmap_request(&udc->gadget,
+			&udc->ep0_ctrl_req.req, 0);
+
+		/* bcm63xx_udc_pullup() is waiting for this */
+		mb();
+		udc->ep0state = EP0_SHUTDOWN;
+	} else if (udc->ep0_reply) {
+		/*
+		 * This could happen if a USB RESET shows up during an ep0
+		 * transaction (especially if a laggy driver like gadgetfs
+		 * is in use).
+		 */
+		dev_warn(udc->dev, "nuking unexpected reply\n");
+		bcm63xx_ep0_nuke_reply(udc, 0);
+	} else {
+		return -EAGAIN;
+	}
+
+	return 0;
+}
+
+/**
+ * bcm63xx_ep0_one_round - Handle the current ep0 state.
+ * @udc: Reference to the device controller.
+ *
+ * Returns 0 if work was done; -EAGAIN if nothing to do.
+ */
+static int bcm63xx_ep0_one_round(struct bcm63xx_udc *udc)
+{
+	enum bcm63xx_ep0_state ep0state = udc->ep0state;
+	bool shutdown = udc->ep0_req_reset || udc->ep0_req_shutdown;
+
+	switch (udc->ep0state) {
+	case EP0_REQUEUE:
+		/* set up descriptor to receive SETUP packet */
+		bcm63xx_ep0_internal_request(udc, IUDMA_EP0_RXCHAN,
+					     BCM63XX_MAX_CTRL_PKT);
+		ep0state = EP0_IDLE;
+		break;
+	case EP0_IDLE:
+		return bcm63xx_ep0_do_idle(udc);
+	case EP0_IN_DATA_PHASE_SETUP:
+		/*
+		 * Normal case: TX request is in ep0_reply (queued by the
+		 * callback), or will be queued shortly.  When it's here,
+		 * send it to the HW and go to EP0_IN_DATA_PHASE_COMPLETE.
+		 *
+		 * Shutdown case: Stop waiting for the reply.  Just
+		 * REQUEUE->IDLE.  The gadget driver is NOT expected to
+		 * queue anything else now.
+		 */
+		if (udc->ep0_reply) {
+			bcm63xx_ep0_map_write(udc, IUDMA_EP0_TXCHAN,
+					      udc->ep0_reply);
+			ep0state = EP0_IN_DATA_PHASE_COMPLETE;
+		} else if (shutdown) {
+			ep0state = EP0_REQUEUE;
+		}
+		break;
+	case EP0_IN_DATA_PHASE_COMPLETE: {
+		/*
+		 * Normal case: TX packet (ep0_reply) is in flight; wait for
+		 * it to finish, then go back to REQUEUE->IDLE.
+		 *
+		 * Shutdown case: Reset the TX channel, send -ESHUTDOWN
+		 * completion to the gadget driver, then REQUEUE->IDLE.
+		 */
+		if (udc->ep0_req_completed) {
+			udc->ep0_reply = NULL;
+			bcm63xx_ep0_read_complete(udc);
+			/*
+			 * the "ack" sometimes gets eaten (see
+			 * bcm63xx_ep0_do_idle)
+			 */
+			ep0state = EP0_REQUEUE;
+		} else if (shutdown) {
+			iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_TXCHAN]);
+			bcm63xx_ep0_nuke_reply(udc, 1);
+			ep0state = EP0_REQUEUE;
+		}
+		break;
+	}
+	case EP0_OUT_DATA_PHASE_SETUP:
+		/* Similar behavior to EP0_IN_DATA_PHASE_SETUP */
+		if (udc->ep0_reply) {
+			bcm63xx_ep0_map_write(udc, IUDMA_EP0_RXCHAN,
+					      udc->ep0_reply);
+			ep0state = EP0_OUT_DATA_PHASE_COMPLETE;
+		} else if (shutdown) {
+			ep0state = EP0_REQUEUE;
+		}
+		break;
+	case EP0_OUT_DATA_PHASE_COMPLETE: {
+		/* Similar behavior to EP0_IN_DATA_PHASE_COMPLETE */
+		if (udc->ep0_req_completed) {
+			udc->ep0_reply = NULL;
+			bcm63xx_ep0_read_complete(udc);
+
+			/* send 0-byte ack to host */
+			bcm63xx_ep0_internal_request(udc, IUDMA_EP0_TXCHAN, 0);
+			ep0state = EP0_OUT_STATUS_PHASE;
+		} else if (shutdown) {
+			iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_RXCHAN]);
+			bcm63xx_ep0_nuke_reply(udc, 0);
+			ep0state = EP0_REQUEUE;
+		}
+		break;
+	}
+	case EP0_OUT_STATUS_PHASE:
+		/*
+		 * Normal case: 0-byte OUT ack packet is in flight; wait
+		 * for it to finish, then go back to REQUEUE->IDLE.
+		 *
+		 * Shutdown case: just cancel the transmission.  Don't bother
+		 * calling the completion, because it originated from this
+		 * function anyway.  Then go back to REQUEUE->IDLE.
+		 */
+		if (udc->ep0_req_completed) {
+			bcm63xx_ep0_read_complete(udc);
+			ep0state = EP0_REQUEUE;
+		} else if (shutdown) {
+			iudma_reset_channel(udc, &udc->iudma[IUDMA_EP0_TXCHAN]);
+			udc->ep0_request = NULL;
+			ep0state = EP0_REQUEUE;
+		}
+		break;
+	case EP0_IN_FAKE_STATUS_PHASE: {
+		/*
+		 * Normal case: we spoofed a SETUP packet and are now
+		 * waiting for the gadget driver to send a 0-byte reply.
+		 * This doesn't actually get sent to the HW because the
+		 * HW has already sent its own reply.  Once we get the
+		 * response, return to IDLE.
+		 *
+		 * Shutdown case: return to IDLE immediately.
+		 *
+		 * Note that the ep0 RX descriptor has remained queued
+		 * (and possibly unfilled) during this entire transaction.
+		 * The HW datapath (IUDMA) never even sees SET_CONFIGURATION
+		 * or SET_INTERFACE transactions.
+		 */
+		struct usb_request *r = udc->ep0_reply;
+
+		if (!r) {
+			if (shutdown)
+				ep0state = EP0_IDLE;
+			break;
+		}
+
+		bcm63xx_ep0_complete(udc, r, 0);
+		udc->ep0_reply = NULL;
+		ep0state = EP0_IDLE;
+		break;
+	}
+	case EP0_SHUTDOWN:
+		break;
+	}
+
+	if (udc->ep0state == ep0state)
+		return -EAGAIN;
+
+	udc->ep0state = ep0state;
+	return 0;
+}
+
+/**
+ * bcm63xx_ep0_process - ep0 worker thread / state machine.
+ * @w: Workqueue struct.
+ *
+ * bcm63xx_ep0_process is triggered any time an event occurs on ep0.  It
+ * is used to synchronize ep0 events and ensure that both HW and SW events
+ * occur in a well-defined order.  When the ep0 IUDMA queues are idle, it may
+ * synthesize SET_CONFIGURATION / SET_INTERFACE requests that were consumed
+ * by the USBD hardware.
+ *
+ * The worker function will continue iterating around the state machine
+ * until there is nothing left to do.  Usually "nothing left to do" means
+ * that we're waiting for a new event from the hardware.
+ */
+static void bcm63xx_ep0_process(struct work_struct *w)
+{
+	struct bcm63xx_udc *udc = container_of(w, struct bcm63xx_udc, ep0_wq);
+	spin_lock_irq(&udc->lock);
+	while (bcm63xx_ep0_one_round(udc) == 0)
+		;
+	spin_unlock_irq(&udc->lock);
+}
+
+/***********************************************************************
+ * Standard UDC gadget operations
+ ***********************************************************************/
+
+/**
+ * bcm63xx_udc_get_frame - Read current SOF frame number from the HW.
+ * @gadget: USB slave device.
+ */
+static int bcm63xx_udc_get_frame(struct usb_gadget *gadget)
+{
+	struct bcm63xx_udc *udc = gadget_to_udc(gadget);
+
+	return (usbd_readl(udc, USBD_STATUS_REG) &
+		USBD_STATUS_SOF_MASK) >> USBD_STATUS_SOF_SHIFT;
+}
+
+/**
+ * bcm63xx_udc_pullup - Enable/disable pullup on D+ line.
+ * @gadget: USB slave device.
+ * @is_on: 0 to disable pullup, 1 to enable.
+ *
+ * See notes in bcm63xx_select_pullup().
+ */
+static int bcm63xx_udc_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct bcm63xx_udc *udc = gadget_to_udc(gadget);
+	unsigned long flags;
+	int i, rc = -EINVAL;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (is_on && udc->ep0state == EP0_SHUTDOWN) {
+		udc->gadget.speed = USB_SPEED_UNKNOWN;
+		udc->ep0state = EP0_REQUEUE;
+		bcm63xx_fifo_setup(udc);
+		bcm63xx_fifo_reset(udc);
+		bcm63xx_ep_setup(udc);
+
+		bitmap_zero(&udc->wedgemap, BCM63XX_NUM_EP);
+		for (i = 0; i < BCM63XX_NUM_EP; i++)
+			bcm63xx_set_stall(udc, &udc->bep[i], false);
+
+		bcm63xx_set_ctrl_irqs(udc, true);
+		bcm63xx_select_pullup(gadget_to_udc(gadget), true);
+		rc = 0;
+	} else if (!is_on && udc->ep0state != EP0_SHUTDOWN) {
+		bcm63xx_select_pullup(gadget_to_udc(gadget), false);
+
+		udc->ep0_req_shutdown = 1;
+		spin_unlock_irqrestore(&udc->lock, flags);
+
+		while (1) {
+			schedule_work(&udc->ep0_wq);
+			if (udc->ep0state == EP0_SHUTDOWN)
+				break;
+			msleep(50);
+		}
+		bcm63xx_set_ctrl_irqs(udc, false);
+		cancel_work_sync(&udc->ep0_wq);
+		return 0;
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return rc;
+}
+
+/**
+ * bcm63xx_udc_start - Start the controller.
+ * @gadget: USB slave device.
+ * @driver: Driver for USB slave devices.
+ */
+static int bcm63xx_udc_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	struct bcm63xx_udc *udc = gadget_to_udc(gadget);
+	unsigned long flags;
+
+	if (!driver || driver->max_speed < USB_SPEED_HIGH ||
+	    !driver->setup)
+		return -EINVAL;
+	if (!udc)
+		return -ENODEV;
+	if (udc->driver)
+		return -EBUSY;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	set_clocks(udc, true);
+	bcm63xx_fifo_setup(udc);
+	bcm63xx_ep_init(udc);
+	bcm63xx_ep_setup(udc);
+	bcm63xx_fifo_reset(udc);
+	bcm63xx_select_phy_mode(udc, true);
+
+	udc->driver = driver;
+	driver->driver.bus = NULL;
+	udc->gadget.dev.driver = &driver->driver;
+	udc->gadget.dev.of_node = udc->dev->of_node;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/**
+ * bcm63xx_udc_stop - Shut down the controller.
+ * @gadget: USB slave device.
+ * @driver: Driver for USB slave devices.
+ */
+static int bcm63xx_udc_stop(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	struct bcm63xx_udc *udc = gadget_to_udc(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	udc->driver = NULL;
+	udc->gadget.dev.driver = NULL;
+
+	/*
+	 * If we switch the PHY too abruptly after dropping D+, the host
+	 * will often complain:
+	 *
+	 *     hub 1-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
+	 */
+	msleep(100);
+
+	bcm63xx_select_phy_mode(udc, false);
+	set_clocks(udc, false);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops bcm63xx_udc_ops = {
+	.get_frame	= bcm63xx_udc_get_frame,
+	.pullup		= bcm63xx_udc_pullup,
+	.udc_start	= bcm63xx_udc_start,
+	.udc_stop	= bcm63xx_udc_stop,
+};
+
+/***********************************************************************
+ * IRQ handling
+ ***********************************************************************/
+
+/**
+ * bcm63xx_update_cfg_iface - Read current configuration/interface settings.
+ * @udc: Reference to the device controller.
+ *
+ * This controller intercepts SET_CONFIGURATION and SET_INTERFACE messages.
+ * The driver never sees the raw control packets coming in on the ep0
+ * IUDMA channel, but at least we get an interrupt event to tell us that
+ * new values are waiting in the USBD_STATUS register.
+ */
+static void bcm63xx_update_cfg_iface(struct bcm63xx_udc *udc)
+{
+	u32 reg = usbd_readl(udc, USBD_STATUS_REG);
+
+	udc->cfg = (reg & USBD_STATUS_CFG_MASK) >> USBD_STATUS_CFG_SHIFT;
+	udc->iface = (reg & USBD_STATUS_INTF_MASK) >> USBD_STATUS_INTF_SHIFT;
+	udc->alt_iface = (reg & USBD_STATUS_ALTINTF_MASK) >>
+			 USBD_STATUS_ALTINTF_SHIFT;
+	bcm63xx_ep_setup(udc);
+}
+
+/**
+ * bcm63xx_update_link_speed - Check to see if the link speed has changed.
+ * @udc: Reference to the device controller.
+ *
+ * The link speed update coincides with a SETUP IRQ.  Returns 1 if the
+ * speed has changed, so that the caller can update the endpoint settings.
+ */
+static int bcm63xx_update_link_speed(struct bcm63xx_udc *udc)
+{
+	u32 reg = usbd_readl(udc, USBD_STATUS_REG);
+	enum usb_device_speed oldspeed = udc->gadget.speed;
+
+	switch ((reg & USBD_STATUS_SPD_MASK) >> USBD_STATUS_SPD_SHIFT) {
+	case BCM63XX_SPD_HIGH:
+		udc->gadget.speed = USB_SPEED_HIGH;
+		break;
+	case BCM63XX_SPD_FULL:
+		udc->gadget.speed = USB_SPEED_FULL;
+		break;
+	default:
+		/* this should never happen */
+		udc->gadget.speed = USB_SPEED_UNKNOWN;
+		dev_err(udc->dev,
+			"received SETUP packet with invalid link speed\n");
+		return 0;
+	}
+
+	if (udc->gadget.speed != oldspeed) {
+		dev_info(udc->dev, "link up, %s-speed mode\n",
+			 udc->gadget.speed == USB_SPEED_HIGH ? "high" : "full");
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+/**
+ * bcm63xx_update_wedge - Iterate through wedged endpoints.
+ * @udc: Reference to the device controller.
+ * @new_status: true to "refresh" wedge status; false to clear it.
+ *
+ * On a SETUP interrupt, we need to manually "refresh" the wedge status
+ * because the controller hardware is designed to automatically clear
+ * stalls in response to a CLEAR_FEATURE request from the host.
+ *
+ * On a RESET interrupt, we do want to restore all wedged endpoints.
+ */
+static void bcm63xx_update_wedge(struct bcm63xx_udc *udc, bool new_status)
+{
+	int i;
+
+	for_each_set_bit(i, &udc->wedgemap, BCM63XX_NUM_EP) {
+		bcm63xx_set_stall(udc, &udc->bep[i], new_status);
+		if (!new_status)
+			clear_bit(i, &udc->wedgemap);
+	}
+}
+
+/**
+ * bcm63xx_udc_ctrl_isr - ISR for control path events (USBD).
+ * @irq: IRQ number (unused).
+ * @dev_id: Reference to the device controller.
+ *
+ * This is where we handle link (VBUS) down, USB reset, speed changes,
+ * SET_CONFIGURATION, and SET_INTERFACE events.
+ */
+static irqreturn_t bcm63xx_udc_ctrl_isr(int irq, void *dev_id)
+{
+	struct bcm63xx_udc *udc = dev_id;
+	u32 stat;
+	bool disconnected = false;
+
+	stat = usbd_readl(udc, USBD_EVENT_IRQ_STATUS_REG) &
+	       usbd_readl(udc, USBD_EVENT_IRQ_MASK_REG);
+
+	usbd_writel(udc, stat, USBD_EVENT_IRQ_STATUS_REG);
+
+	spin_lock(&udc->lock);
+	if (stat & BIT(USBD_EVENT_IRQ_USB_LINK)) {
+		/* VBUS toggled */
+
+		if (!(usbd_readl(udc, USBD_EVENTS_REG) &
+		      USBD_EVENTS_USB_LINK_MASK) &&
+		      udc->gadget.speed != USB_SPEED_UNKNOWN)
+			dev_info(udc->dev, "link down\n");
+
+		udc->gadget.speed = USB_SPEED_UNKNOWN;
+		disconnected = true;
+	}
+	if (stat & BIT(USBD_EVENT_IRQ_USB_RESET)) {
+		bcm63xx_fifo_setup(udc);
+		bcm63xx_fifo_reset(udc);
+		bcm63xx_ep_setup(udc);
+
+		bcm63xx_update_wedge(udc, false);
+
+		udc->ep0_req_reset = 1;
+		schedule_work(&udc->ep0_wq);
+		disconnected = true;
+	}
+	if (stat & BIT(USBD_EVENT_IRQ_SETUP)) {
+		if (bcm63xx_update_link_speed(udc)) {
+			bcm63xx_fifo_setup(udc);
+			bcm63xx_ep_setup(udc);
+		}
+		bcm63xx_update_wedge(udc, true);
+	}
+	if (stat & BIT(USBD_EVENT_IRQ_SETCFG)) {
+		bcm63xx_update_cfg_iface(udc);
+		udc->ep0_req_set_cfg = 1;
+		schedule_work(&udc->ep0_wq);
+	}
+	if (stat & BIT(USBD_EVENT_IRQ_SETINTF)) {
+		bcm63xx_update_cfg_iface(udc);
+		udc->ep0_req_set_iface = 1;
+		schedule_work(&udc->ep0_wq);
+	}
+	spin_unlock(&udc->lock);
+
+	if (disconnected && udc->driver)
+		udc->driver->disconnect(&udc->gadget);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * bcm63xx_udc_data_isr - ISR for data path events (IUDMA).
+ * @irq: IRQ number (unused).
+ * @dev_id: Reference to the IUDMA channel that generated the interrupt.
+ *
+ * For the two ep0 channels, we have special handling that triggers the
+ * ep0 worker thread.  For normal bulk/intr channels, either queue up
+ * the next buffer descriptor for the transaction (incomplete transaction),
+ * or invoke the completion callback (complete transactions).
+ */
+static irqreturn_t bcm63xx_udc_data_isr(int irq, void *dev_id)
+{
+	struct iudma_ch *iudma = dev_id;
+	struct bcm63xx_udc *udc = iudma->udc;
+	struct bcm63xx_ep *bep;
+	struct usb_request *req = NULL;
+	struct bcm63xx_req *breq = NULL;
+	int rc;
+	bool is_done = false;
+
+	spin_lock(&udc->lock);
+
+	usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
+			ENETDMAC_IR_REG(iudma->ch_idx));
+	bep = iudma->bep;
+	rc = iudma_read(udc, iudma);
+
+	/* special handling for EP0 RX (0) and TX (1) */
+	if (iudma->ch_idx == IUDMA_EP0_RXCHAN ||
+	    iudma->ch_idx == IUDMA_EP0_TXCHAN) {
+		req = udc->ep0_request;
+		breq = our_req(req);
+
+		/* a single request could require multiple submissions */
+		if (rc >= 0) {
+			req->actual += rc;
+
+			if (req->actual >= req->length || breq->bd_bytes > rc) {
+				udc->ep0_req_completed = 1;
+				is_done = true;
+				schedule_work(&udc->ep0_wq);
+
+				/* "actual" on a ZLP is 1 byte */
+				req->actual = min(req->actual, req->length);
+			} else {
+				/* queue up the next BD (same request) */
+				iudma_write(udc, iudma, breq);
+			}
+		}
+	} else if (!list_empty(&bep->queue)) {
+		breq = list_first_entry(&bep->queue, struct bcm63xx_req, queue);
+		req = &breq->req;
+
+		if (rc >= 0) {
+			req->actual += rc;
+
+			if (req->actual >= req->length || breq->bd_bytes > rc) {
+				is_done = true;
+				list_del(&breq->queue);
+
+				req->actual = min(req->actual, req->length);
+
+				if (!list_empty(&bep->queue)) {
+					struct bcm63xx_req *next;
+
+					next = list_first_entry(&bep->queue,
+						struct bcm63xx_req, queue);
+					iudma_write(udc, iudma, next);
+				}
+			} else {
+				iudma_write(udc, iudma, breq);
+			}
+		}
+	}
+	spin_unlock(&udc->lock);
+
+	if (is_done) {
+		usb_gadget_unmap_request(&udc->gadget, req, iudma->is_tx);
+		if (req->complete)
+			req->complete(&bep->ep, req);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/***********************************************************************
+ * Debug filesystem
+ ***********************************************************************/
+
+/*
+ * bcm63xx_usbd_dbg_show - Show USBD controller state.
+ * @s: seq_file to which the information will be written.
+ * @p: Unused.
+ *
+ * This file nominally shows up as /sys/kernel/debug/bcm63xx_udc/usbd
+ */
+static int bcm63xx_usbd_dbg_show(struct seq_file *s, void *p)
+{
+	struct bcm63xx_udc *udc = s->private;
+
+	if (!udc->driver)
+		return -ENODEV;
+
+	seq_printf(s, "ep0 state: %s\n",
+		   bcm63xx_ep0_state_names[udc->ep0state]);
+	seq_printf(s, "  pending requests: %s%s%s%s%s%s%s\n",
+		   udc->ep0_req_reset ? "reset " : "",
+		   udc->ep0_req_set_cfg ? "set_cfg " : "",
+		   udc->ep0_req_set_iface ? "set_iface " : "",
+		   udc->ep0_req_shutdown ? "shutdown " : "",
+		   udc->ep0_request ? "pending " : "",
+		   udc->ep0_req_completed ? "completed " : "",
+		   udc->ep0_reply ? "reply " : "");
+	seq_printf(s, "cfg: %d; iface: %d; alt_iface: %d\n",
+		   udc->cfg, udc->iface, udc->alt_iface);
+	seq_printf(s, "regs:\n");
+	seq_printf(s, "  control: %08x; straps: %08x; status: %08x\n",
+		   usbd_readl(udc, USBD_CONTROL_REG),
+		   usbd_readl(udc, USBD_STRAPS_REG),
+		   usbd_readl(udc, USBD_STATUS_REG));
+	seq_printf(s, "  events:  %08x; stall:  %08x\n",
+		   usbd_readl(udc, USBD_EVENTS_REG),
+		   usbd_readl(udc, USBD_STALL_REG));
+
+	return 0;
+}
+
+/*
+ * bcm63xx_iudma_dbg_show - Show IUDMA status and descriptors.
+ * @s: seq_file to which the information will be written.
+ * @p: Unused.
+ *
+ * This file nominally shows up as /sys/kernel/debug/bcm63xx_udc/iudma
+ */
+static int bcm63xx_iudma_dbg_show(struct seq_file *s, void *p)
+{
+	struct bcm63xx_udc *udc = s->private;
+	int ch_idx, i;
+	u32 sram2, sram3;
+
+	if (!udc->driver)
+		return -ENODEV;
+
+	for (ch_idx = 0; ch_idx < BCM63XX_NUM_IUDMA; ch_idx++) {
+		struct iudma_ch *iudma = &udc->iudma[ch_idx];
+		struct list_head *pos;
+
+		seq_printf(s, "IUDMA channel %d -- ", ch_idx);
+		switch (iudma_defaults[ch_idx].ep_type) {
+		case BCMEP_CTRL:
+			seq_printf(s, "control");
+			break;
+		case BCMEP_BULK:
+			seq_printf(s, "bulk");
+			break;
+		case BCMEP_INTR:
+			seq_printf(s, "interrupt");
+			break;
+		}
+		seq_printf(s, ch_idx & 0x01 ? " tx" : " rx");
+		seq_printf(s, " [ep%d]:\n",
+			   max_t(int, iudma_defaults[ch_idx].ep_num, 0));
+		seq_printf(s, "  cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n",
+			   usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)),
+			   usb_dmac_readl(udc, ENETDMAC_IR_REG(ch_idx)),
+			   usb_dmac_readl(udc, ENETDMAC_IRMASK_REG(ch_idx)),
+			   usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG(ch_idx)));
+
+		sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG(ch_idx));
+		sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG(ch_idx));
+		seq_printf(s, "  base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n",
+			   usb_dmas_readl(udc, ENETDMAS_RSTART_REG(ch_idx)),
+			   sram2 >> 16, sram2 & 0xffff,
+			   sram3 >> 16, sram3 & 0xffff,
+			   usb_dmas_readl(udc, ENETDMAS_SRAM4_REG(ch_idx)));
+		seq_printf(s, "  desc: %d/%d used", iudma->n_bds_used,
+			   iudma->n_bds);
+
+		if (iudma->bep) {
+			i = 0;
+			list_for_each(pos, &iudma->bep->queue)
+				i++;
+			seq_printf(s, "; %d queued\n", i);
+		} else {
+			seq_printf(s, "\n");
+		}
+
+		for (i = 0; i < iudma->n_bds; i++) {
+			struct bcm_enet_desc *d = &iudma->bd_ring[i];
+
+			seq_printf(s, "  %03x (%02x): len_stat: %04x_%04x; pa %08x",
+				   i * sizeof(*d), i,
+				   d->len_stat >> 16, d->len_stat & 0xffff,
+				   d->address);
+			if (d == iudma->read_bd)
+				seq_printf(s, "   <<RD");
+			if (d == iudma->write_bd)
+				seq_printf(s, "   <<WR");
+			seq_printf(s, "\n");
+		}
+
+		seq_printf(s, "\n");
+	}
+
+	return 0;
+}
+
+static int bcm63xx_usbd_dbg_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, bcm63xx_usbd_dbg_show, inode->i_private);
+}
+
+static int bcm63xx_iudma_dbg_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, bcm63xx_iudma_dbg_show, inode->i_private);
+}
+
+static const struct file_operations usbd_dbg_fops = {
+	.owner		= THIS_MODULE,
+	.open		= bcm63xx_usbd_dbg_open,
+	.llseek		= seq_lseek,
+	.read		= seq_read,
+	.release	= single_release,
+};
+
+static const struct file_operations iudma_dbg_fops = {
+	.owner		= THIS_MODULE,
+	.open		= bcm63xx_iudma_dbg_open,
+	.llseek		= seq_lseek,
+	.read		= seq_read,
+	.release	= single_release,
+};
+
+
+/**
+ * bcm63xx_udc_init_debugfs - Create debugfs entries.
+ * @udc: Reference to the device controller.
+ */
+static void bcm63xx_udc_init_debugfs(struct bcm63xx_udc *udc)
+{
+	struct dentry *root, *usbd, *iudma;
+
+	if (!IS_ENABLED(CONFIG_USB_GADGET_DEBUG_FS))
+		return;
+
+	root = debugfs_create_dir(udc->gadget.name, NULL);
+	if (IS_ERR(root) || !root)
+		goto err_root;
+
+	usbd = debugfs_create_file("usbd", 0400, root, udc,
+			&usbd_dbg_fops);
+	if (!usbd)
+		goto err_usbd;
+	iudma = debugfs_create_file("iudma", 0400, root, udc,
+			&iudma_dbg_fops);
+	if (!iudma)
+		goto err_iudma;
+
+	udc->debugfs_root = root;
+	udc->debugfs_usbd = usbd;
+	udc->debugfs_iudma = iudma;
+	return;
+err_iudma:
+	debugfs_remove(usbd);
+err_usbd:
+	debugfs_remove(root);
+err_root:
+	dev_err(udc->dev, "debugfs is not available\n");
+}
+
+/**
+ * bcm63xx_udc_cleanup_debugfs - Remove debugfs entries.
+ * @udc: Reference to the device controller.
+ *
+ * debugfs_remove() is safe to call with a NULL argument.
+ */
+static void bcm63xx_udc_cleanup_debugfs(struct bcm63xx_udc *udc)
+{
+	debugfs_remove(udc->debugfs_iudma);
+	debugfs_remove(udc->debugfs_usbd);
+	debugfs_remove(udc->debugfs_root);
+	udc->debugfs_iudma = NULL;
+	udc->debugfs_usbd = NULL;
+	udc->debugfs_root = NULL;
+}
+
+/***********************************************************************
+ * Driver init/exit
+ ***********************************************************************/
+
+/**
+ * bcm63xx_udc_gadget_release - Called from device_release().
+ * @dev: Unused.
+ *
+ * We get a warning if this function doesn't exist, but it's empty because
+ * we don't have to free any of the memory allocated with the devm_* APIs.
+ */
+static void bcm63xx_udc_gadget_release(struct device *dev)
+{
+}
+
+/**
+ * bcm63xx_udc_probe - Initialize a new instance of the UDC.
+ * @pdev: Platform device struct from the bcm63xx BSP code.
+ *
+ * Note that platform data is required, because pd.port_no varies from chip
+ * to chip and is used to switch the correct USB port to device mode.
+ */
+static int __devinit bcm63xx_udc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct bcm63xx_usbd_platform_data *pd = dev->platform_data;
+	struct bcm63xx_udc *udc;
+	struct resource *res;
+	int rc = -ENOMEM, i, irq;
+
+	udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL);
+	if (!udc) {
+		dev_err(dev, "cannot allocate memory\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, udc);
+	udc->dev = dev;
+	udc->pd = pd;
+
+	if (!pd) {
+		dev_err(dev, "missing platform data\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "error finding USBD resource\n");
+		return -ENXIO;
+	}
+	udc->usbd_regs = devm_request_and_ioremap(dev, res);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		dev_err(dev, "error finding IUDMA resource\n");
+		return -ENXIO;
+	}
+	udc->iudma_regs = devm_request_and_ioremap(dev, res);
+
+	if (!udc->usbd_regs || !udc->iudma_regs) {
+		dev_err(dev, "error requesting resources\n");
+		return -ENXIO;
+	}
+
+	spin_lock_init(&udc->lock);
+	INIT_WORK(&udc->ep0_wq, bcm63xx_ep0_process);
+	dev_set_name(&udc->gadget.dev, "gadget");
+
+	udc->gadget.ops = &bcm63xx_udc_ops;
+	udc->gadget.name = dev_name(dev);
+	udc->gadget.dev.parent = dev;
+	udc->gadget.dev.release = bcm63xx_udc_gadget_release;
+	udc->gadget.dev.dma_mask = dev->dma_mask;
+
+	if (!pd->use_fullspeed && !use_fullspeed)
+		udc->gadget.max_speed = USB_SPEED_HIGH;
+	else
+		udc->gadget.max_speed = USB_SPEED_FULL;
+
+	/* request clocks, allocate buffers, and clear any pending IRQs */
+	rc = bcm63xx_init_udc_hw(udc);
+	if (rc)
+		return rc;
+
+	rc = -ENXIO;
+
+	/* IRQ resource #0: control interrupt (VBUS, speed, etc.) */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "missing IRQ resource #0\n");
+		goto out_uninit;
+	}
+	if (devm_request_irq(dev, irq, &bcm63xx_udc_ctrl_isr, 0,
+			     dev_name(dev), udc) < 0) {
+		dev_err(dev, "error requesting IRQ #%d\n", irq);
+		goto out_uninit;
+	}
+
+	/* IRQ resources #1-6: data interrupts for IUDMA channels 0-5 */
+	for (i = 0; i < BCM63XX_NUM_IUDMA; i++) {
+		irq = platform_get_irq(pdev, i + 1);
+		if (irq < 0) {
+			dev_err(dev, "missing IRQ resource #%d\n", i + 1);
+			goto out_uninit;
+		}
+		if (devm_request_irq(dev, irq, &bcm63xx_udc_data_isr, 0,
+				     dev_name(dev), &udc->iudma[i]) < 0) {
+			dev_err(dev, "error requesting IRQ #%d\n", irq);
+			goto out_uninit;
+		}
+	}
+
+	rc = device_register(&udc->gadget.dev);
+	if (rc)
+		goto out_uninit;
+
+	bcm63xx_udc_init_debugfs(udc);
+	rc = usb_add_gadget_udc(dev, &udc->gadget);
+	if (!rc)
+		return 0;
+
+	bcm63xx_udc_cleanup_debugfs(udc);
+	device_unregister(&udc->gadget.dev);
+out_uninit:
+	bcm63xx_uninit_udc_hw(udc);
+	return rc;
+}
+
+/**
+ * bcm63xx_udc_remove - Remove the device from the system.
+ * @pdev: Platform device struct from the bcm63xx BSP code.
+ */
+static int __devexit bcm63xx_udc_remove(struct platform_device *pdev)
+{
+	struct bcm63xx_udc *udc = platform_get_drvdata(pdev);
+
+	bcm63xx_udc_cleanup_debugfs(udc);
+	usb_del_gadget_udc(&udc->gadget);
+	device_unregister(&udc->gadget.dev);
+	BUG_ON(udc->driver);
+
+	platform_set_drvdata(pdev, NULL);
+	bcm63xx_uninit_udc_hw(udc);
+
+	return 0;
+}
+
+static struct platform_driver bcm63xx_udc_driver = {
+	.probe		= bcm63xx_udc_probe,
+	.remove		= __devexit_p(bcm63xx_udc_remove),
+	.driver		= {
+		.name	= DRV_MODULE_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+module_platform_driver(bcm63xx_udc_driver);
+
+MODULE_DESCRIPTION("BCM63xx USB Peripheral Controller");
+MODULE_AUTHOR("Kevin Cernekee <cernekee@gmail.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_MODULE_NAME);
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index 725550f06fa..1e4bb77f00b 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -11,7 +11,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
 #include <linux/module.h>
 
 #include "u_ether.h"
@@ -34,6 +33,7 @@
 #define CDC_PRODUCT_NUM		0xa4aa	/* CDC Composite: ECM + ACM */
 
 /*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
 
 /*
  * Kbuild is not very cooperative with respect to linking separately
@@ -43,10 +43,6 @@
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
 
-#include "composite.c"
-#include "usbstring.c"
-#include "config.c"
-#include "epautoconf.c"
 #include "u_serial.c"
 #include "f_acm.c"
 #include "f_ecm.c"
@@ -92,15 +88,10 @@ static const struct usb_descriptor_header *otg_desc[] = {
 
 
 /* string IDs are assigned dynamically */
-
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
-
-static char manufacturer[50];
-
 static struct usb_string strings_dev[] = {
-	[STRING_MANUFACTURER_IDX].s = manufacturer,
-	[STRING_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
 	{  } /* end of list */
 };
 
@@ -152,7 +143,6 @@ static struct usb_configuration cdc_config_driver = {
 
 static int __init cdc_bind(struct usb_composite_dev *cdev)
 {
-	int			gcnum;
 	struct usb_gadget	*gadget = cdev->gadget;
 	int			status;
 
@@ -172,47 +162,22 @@ static int __init cdc_bind(struct usb_composite_dev *cdev)
 	if (status < 0)
 		goto fail0;
 
-	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0)
-		device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
-	else {
-		/* We assume that can_support_ecm() tells the truth;
-		 * but if the controller isn't recognized at all then
-		 * that assumption is a bit more likely to be wrong.
-		 */
-		WARNING(cdev, "controller '%s' not recognized; trying %s\n",
-				gadget->name,
-				cdc_config_driver.label);
-		device_desc.bcdDevice =
-			cpu_to_le16(0x0300 | 0x0099);
-	}
-
-
 	/* Allocate string descriptor numbers ... note that string
 	 * contents can be overridden by the composite_dev glue.
 	 */
 
-	/* device descriptor strings: manufacturer, product */
-	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
-		init_utsname()->sysname, init_utsname()->release,
-		gadget->name);
-	status = usb_string_id(cdev);
-	if (status < 0)
-		goto fail1;
-	strings_dev[STRING_MANUFACTURER_IDX].id = status;
-	device_desc.iManufacturer = status;
-
-	status = usb_string_id(cdev);
+	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail1;
-	strings_dev[STRING_PRODUCT_IDX].id = status;
-	device_desc.iProduct = status;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 
 	/* register our configuration */
 	status = usb_add_config(cdev, &cdc_config_driver, cdc_do_config);
 	if (status < 0)
 		goto fail1;
 
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n",
 			DRIVER_DESC);
 
@@ -232,11 +197,12 @@ static int __exit cdc_unbind(struct usb_composite_dev *cdev)
 	return 0;
 }
 
-static struct usb_composite_driver cdc_driver = {
+static __refdata struct usb_composite_driver cdc_driver = {
 	.name		= "g_cdc",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
 	.max_speed	= USB_SPEED_HIGH,
+	.bind		= cdc_bind,
 	.unbind		= __exit_p(cdc_unbind),
 };
 
@@ -246,7 +212,7 @@ MODULE_LICENSE("GPL");
 
 static int __init init(void)
 {
-	return usb_composite_probe(&cdc_driver, cdc_bind);
+	return usb_composite_probe(&cdc_driver);
 }
 module_init(init);
 
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 3f72110da1b..957f973dd96 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -28,44 +28,6 @@
  * with the relevant device-wide data.
  */
 
-/* big enough to hold our biggest descriptor */
-#define USB_BUFSIZ	1024
-
-static struct usb_composite_driver *composite;
-static int (*composite_gadget_bind)(struct usb_composite_dev *cdev);
-
-/* Some systems will need runtime overrides for the  product identifiers
- * published in the device descriptor, either numbers or strings or both.
- * String parameters are in UTF-8 (superset of ASCII's 7 bit characters).
- */
-
-static ushort idVendor;
-module_param(idVendor, ushort, 0644);
-MODULE_PARM_DESC(idVendor, "USB Vendor ID");
-
-static ushort idProduct;
-module_param(idProduct, ushort, 0644);
-MODULE_PARM_DESC(idProduct, "USB Product ID");
-
-static ushort bcdDevice;
-module_param(bcdDevice, ushort, 0644);
-MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
-
-static char *iManufacturer;
-module_param(iManufacturer, charp, 0644);
-MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
-
-static char *iProduct;
-module_param(iProduct, charp, 0644);
-MODULE_PARM_DESC(iProduct, "USB Product string");
-
-static char *iSerialNumber;
-module_param(iSerialNumber, charp, 0644);
-MODULE_PARM_DESC(iSerialNumber, "SerialNumber string");
-
-static char composite_manufacturer[50];
-
-/*-------------------------------------------------------------------------*/
 /**
  * next_ep_desc() - advance to the next EP descriptor
  * @t: currect pointer within descriptor array
@@ -192,6 +154,7 @@ ep_found:
 	}
 	return 0;
 }
+EXPORT_SYMBOL_GPL(config_ep_by_speed);
 
 /**
  * usb_add_function() - add a function to a configuration
@@ -250,6 +213,7 @@ done:
 				function->name, function, value);
 	return value;
 }
+EXPORT_SYMBOL_GPL(usb_add_function);
 
 /**
  * usb_function_deactivate - prevent function and gadget enumeration
@@ -286,6 +250,7 @@ int usb_function_deactivate(struct usb_function *function)
 	spin_unlock_irqrestore(&cdev->lock, flags);
 	return status;
 }
+EXPORT_SYMBOL_GPL(usb_function_deactivate);
 
 /**
  * usb_function_activate - allow function and gadget enumeration
@@ -300,9 +265,10 @@ int usb_function_deactivate(struct usb_function *function)
 int usb_function_activate(struct usb_function *function)
 {
 	struct usb_composite_dev	*cdev = function->config->cdev;
+	unsigned long			flags;
 	int				status = 0;
 
-	spin_lock(&cdev->lock);
+	spin_lock_irqsave(&cdev->lock, flags);
 
 	if (WARN_ON(cdev->deactivations == 0))
 		status = -EINVAL;
@@ -312,9 +278,10 @@ int usb_function_activate(struct usb_function *function)
 			status = usb_gadget_connect(cdev->gadget);
 	}
 
-	spin_unlock(&cdev->lock);
+	spin_unlock_irqrestore(&cdev->lock, flags);
 	return status;
 }
+EXPORT_SYMBOL_GPL(usb_function_activate);
 
 /**
  * usb_interface_id() - allocate an unused interface ID
@@ -351,16 +318,18 @@ int usb_interface_id(struct usb_configuration *config,
 	}
 	return -ENODEV;
 }
+EXPORT_SYMBOL_GPL(usb_interface_id);
 
 static int config_buf(struct usb_configuration *config,
 		enum usb_device_speed speed, void *buf, u8 type)
 {
 	struct usb_config_descriptor	*c = buf;
 	void				*next = buf + USB_DT_CONFIG_SIZE;
-	int				len = USB_BUFSIZ - USB_DT_CONFIG_SIZE;
+	int				len;
 	struct usb_function		*f;
 	int				status;
 
+	len = USB_COMP_EP0_BUFSIZ - USB_DT_CONFIG_SIZE;
 	/* write the config descriptor */
 	c = buf;
 	c->bLength = USB_DT_CONFIG_SIZE;
@@ -790,6 +759,7 @@ done:
 				config->bConfigurationValue, status);
 	return status;
 }
+EXPORT_SYMBOL_GPL(usb_add_config);
 
 static void remove_config(struct usb_composite_dev *cdev,
 			      struct usb_configuration *config)
@@ -889,10 +859,10 @@ static int lookup_string(
 static int get_string(struct usb_composite_dev *cdev,
 		void *buf, u16 language, int id)
 {
+	struct usb_composite_driver	*composite = cdev->driver;
 	struct usb_configuration	*c;
 	struct usb_function		*f;
 	int				len;
-	const char			*str;
 
 	/* Yes, not only is USB's I18N support probably more than most
 	 * folk will ever care about ... also, it's all supported here.
@@ -932,26 +902,6 @@ static int get_string(struct usb_composite_dev *cdev,
 		return s->bLength;
 	}
 
-	/* Otherwise, look up and return a specified string.  First
-	 * check if the string has not been overridden.
-	 */
-	if (cdev->manufacturer_override == id)
-		str = iManufacturer ?: composite->iManufacturer ?:
-			composite_manufacturer;
-	else if (cdev->product_override == id)
-		str = iProduct ?: composite->iProduct;
-	else if (cdev->serial_override == id)
-		str = iSerialNumber ?: composite->iSerialNumber;
-	else
-		str = NULL;
-	if (str) {
-		struct usb_gadget_strings strings = {
-			.language = language,
-			.strings  = &(struct usb_string) { 0xff, str }
-		};
-		return usb_gadget_get_string(&strings, 0xff, buf);
-	}
-
 	/* String IDs are device-scoped, so we look up each string
 	 * table we're told about.  These lookups are infrequent;
 	 * simpler-is-better here.
@@ -1003,6 +953,7 @@ int usb_string_id(struct usb_composite_dev *cdev)
 	}
 	return -ENODEV;
 }
+EXPORT_SYMBOL_GPL(usb_string_id);
 
 /**
  * usb_string_ids() - allocate unused string IDs in batch
@@ -1034,6 +985,7 @@ int usb_string_ids_tab(struct usb_composite_dev *cdev, struct usb_string *str)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(usb_string_ids_tab);
 
 /**
  * usb_string_ids_n() - allocate unused string IDs in batch
@@ -1062,7 +1014,7 @@ int usb_string_ids_n(struct usb_composite_dev *c, unsigned n)
 	c->next_string_id += n;
 	return next + 1;
 }
-
+EXPORT_SYMBOL_GPL(usb_string_ids_n);
 
 /*-------------------------------------------------------------------------*/
 
@@ -1359,8 +1311,8 @@ static void composite_disconnect(struct usb_gadget *gadget)
 	spin_lock_irqsave(&cdev->lock, flags);
 	if (cdev->config)
 		reset_config(cdev);
-	if (composite->disconnect)
-		composite->disconnect(cdev);
+	if (cdev->driver->disconnect)
+		cdev->driver->disconnect(cdev);
 	spin_unlock_irqrestore(&cdev->lock, flags);
 }
 
@@ -1396,35 +1348,67 @@ composite_unbind(struct usb_gadget *gadget)
 				struct usb_configuration, list);
 		remove_config(cdev, c);
 	}
-	if (composite->unbind)
-		composite->unbind(cdev);
+	if (cdev->driver->unbind)
+		cdev->driver->unbind(cdev);
 
 	if (cdev->req) {
 		kfree(cdev->req->buf);
 		usb_ep_free_request(gadget->ep0, cdev->req);
 	}
 	device_remove_file(&gadget->dev, &dev_attr_suspended);
+	kfree(cdev->def_manufacturer);
 	kfree(cdev);
 	set_gadget_data(gadget, NULL);
-	composite = NULL;
 }
 
-static u8 override_id(struct usb_composite_dev *cdev, u8 *desc)
+static void update_unchanged_dev_desc(struct usb_device_descriptor *new,
+		const struct usb_device_descriptor *old)
 {
-	if (!*desc) {
-		int ret = usb_string_id(cdev);
-		if (unlikely(ret < 0))
-			WARNING(cdev, "failed to override string ID\n");
-		else
-			*desc = ret;
-	}
+	__le16 idVendor;
+	__le16 idProduct;
+	__le16 bcdDevice;
+	u8 iSerialNumber;
+	u8 iManufacturer;
+	u8 iProduct;
 
-	return *desc;
+	/*
+	 * these variables may have been set in
+	 * usb_composite_overwrite_options()
+	 */
+	idVendor = new->idVendor;
+	idProduct = new->idProduct;
+	bcdDevice = new->bcdDevice;
+	iSerialNumber = new->iSerialNumber;
+	iManufacturer = new->iManufacturer;
+	iProduct = new->iProduct;
+
+	*new = *old;
+	if (idVendor)
+		new->idVendor = idVendor;
+	if (idProduct)
+		new->idProduct = idProduct;
+	if (bcdDevice)
+		new->bcdDevice = bcdDevice;
+	else
+		new->bcdDevice = cpu_to_le16(get_default_bcdDevice());
+	if (iSerialNumber)
+		new->iSerialNumber = iSerialNumber;
+	if (iManufacturer)
+		new->iManufacturer = iManufacturer;
+	if (iProduct)
+		new->iProduct = iProduct;
 }
 
-static int composite_bind(struct usb_gadget *gadget)
+static struct usb_composite_driver *to_cdriver(struct usb_gadget_driver *gdrv)
+{
+	return container_of(gdrv, struct usb_composite_driver, gadget_driver);
+}
+
+static int composite_bind(struct usb_gadget *gadget,
+		struct usb_gadget_driver *gdriver)
 {
 	struct usb_composite_dev	*cdev;
+	struct usb_composite_driver	*composite = to_cdriver(gdriver);
 	int				status = -ENOMEM;
 
 	cdev = kzalloc(sizeof *cdev, GFP_KERNEL);
@@ -1440,13 +1424,12 @@ static int composite_bind(struct usb_gadget *gadget)
 	cdev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
 	if (!cdev->req)
 		goto fail;
-	cdev->req->buf = kmalloc(USB_BUFSIZ, GFP_KERNEL);
+	cdev->req->buf = kmalloc(USB_COMP_EP0_BUFSIZ, GFP_KERNEL);
 	if (!cdev->req->buf)
 		goto fail;
 	cdev->req->complete = composite_setup_complete;
 	gadget->ep0->driver_data = cdev;
 
-	cdev->bufsiz = USB_BUFSIZ;
 	cdev->driver = composite;
 
 	/*
@@ -1467,49 +1450,11 @@ static int composite_bind(struct usb_gadget *gadget)
 	 * serial number), register function drivers, potentially update
 	 * power state and consumption, etc
 	 */
-	status = composite_gadget_bind(cdev);
+	status = composite->bind(cdev);
 	if (status < 0)
 		goto fail;
 
-	cdev->desc = *composite->dev;
-
-	/* standardized runtime overrides for device ID data */
-	if (idVendor)
-		cdev->desc.idVendor = cpu_to_le16(idVendor);
-	else
-		idVendor = le16_to_cpu(cdev->desc.idVendor);
-	if (idProduct)
-		cdev->desc.idProduct = cpu_to_le16(idProduct);
-	else
-		idProduct = le16_to_cpu(cdev->desc.idProduct);
-	if (bcdDevice)
-		cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
-	else
-		bcdDevice = le16_to_cpu(cdev->desc.bcdDevice);
-
-	/* string overrides */
-	if (iManufacturer || !cdev->desc.iManufacturer) {
-		if (!iManufacturer && !composite->iManufacturer &&
-		    !*composite_manufacturer)
-			snprintf(composite_manufacturer,
-				 sizeof composite_manufacturer,
-				 "%s %s with %s",
-				 init_utsname()->sysname,
-				 init_utsname()->release,
-				 gadget->name);
-
-		cdev->manufacturer_override =
-			override_id(cdev, &cdev->desc.iManufacturer);
-	}
-
-	if (iProduct || (!cdev->desc.iProduct && composite->iProduct))
-		cdev->product_override =
-			override_id(cdev, &cdev->desc.iProduct);
-
-	if (iSerialNumber ||
-	    (!cdev->desc.iSerialNumber && composite->iSerialNumber))
-		cdev->serial_override =
-			override_id(cdev, &cdev->desc.iSerialNumber);
+	update_unchanged_dev_desc(&cdev->desc, composite->dev);
 
 	/* has userspace failed to provide a serial number? */
 	if (composite->needs_serial && !cdev->desc.iSerialNumber)
@@ -1546,8 +1491,8 @@ composite_suspend(struct usb_gadget *gadget)
 				f->suspend(f);
 		}
 	}
-	if (composite->suspend)
-		composite->suspend(cdev);
+	if (cdev->driver->suspend)
+		cdev->driver->suspend(cdev);
 
 	cdev->suspended = 1;
 
@@ -1565,8 +1510,8 @@ composite_resume(struct usb_gadget *gadget)
 	 * suspend/resume callbacks?
 	 */
 	DBG(cdev, "resume\n");
-	if (composite->resume)
-		composite->resume(cdev);
+	if (cdev->driver->resume)
+		cdev->driver->resume(cdev);
 	if (cdev->config) {
 		list_for_each_entry(f, &cdev->config->functions, list) {
 			if (f->resume)
@@ -1584,13 +1529,8 @@ composite_resume(struct usb_gadget *gadget)
 
 /*-------------------------------------------------------------------------*/
 
-static struct usb_gadget_driver composite_driver = {
-#ifdef CONFIG_USB_GADGET_SUPERSPEED
-	.max_speed	= USB_SPEED_SUPER,
-#else
-	.max_speed	= USB_SPEED_HIGH,
-#endif
-
+static const struct usb_gadget_driver composite_driver_template = {
+	.bind		= composite_bind,
 	.unbind		= composite_unbind,
 
 	.setup		= composite_setup,
@@ -1623,25 +1563,26 @@ static struct usb_gadget_driver composite_driver = {
  * while it was binding.  That would usually be done in order to wait for
  * some userspace participation.
  */
-int usb_composite_probe(struct usb_composite_driver *driver,
-			       int (*bind)(struct usb_composite_dev *cdev))
+int usb_composite_probe(struct usb_composite_driver *driver)
 {
-	if (!driver || !driver->dev || !bind || composite)
+	struct usb_gadget_driver *gadget_driver;
+
+	if (!driver || !driver->dev || !driver->bind)
 		return -EINVAL;
 
 	if (!driver->name)
 		driver->name = "composite";
-	if (!driver->iProduct)
-		driver->iProduct = driver->name;
-	composite_driver.function =  (char *) driver->name;
-	composite_driver.driver.name = driver->name;
-	composite_driver.max_speed =
-		min_t(u8, composite_driver.max_speed, driver->max_speed);
-	composite = driver;
-	composite_gadget_bind = bind;
-
-	return usb_gadget_probe_driver(&composite_driver, composite_bind);
+
+	driver->gadget_driver = composite_driver_template;
+	gadget_driver = &driver->gadget_driver;
+
+	gadget_driver->function =  (char *) driver->name;
+	gadget_driver->driver.name = driver->name;
+	gadget_driver->max_speed = driver->max_speed;
+
+	return usb_gadget_probe_driver(gadget_driver);
 }
+EXPORT_SYMBOL_GPL(usb_composite_probe);
 
 /**
  * usb_composite_unregister() - unregister a composite driver
@@ -1652,10 +1593,9 @@ int usb_composite_probe(struct usb_composite_driver *driver,
  */
 void usb_composite_unregister(struct usb_composite_driver *driver)
 {
-	if (composite != driver)
-		return;
-	usb_gadget_unregister_driver(&composite_driver);
+	usb_gadget_unregister_driver(&driver->gadget_driver);
 }
+EXPORT_SYMBOL_GPL(usb_composite_unregister);
 
 /**
  * usb_composite_setup_continue() - Continue with the control transfer
@@ -1692,4 +1632,60 @@ void usb_composite_setup_continue(struct usb_composite_dev *cdev)
 
 	spin_unlock_irqrestore(&cdev->lock, flags);
 }
+EXPORT_SYMBOL_GPL(usb_composite_setup_continue);
+
+static char *composite_default_mfr(struct usb_gadget *gadget)
+{
+	char *mfr;
+	int len;
+
+	len = snprintf(NULL, 0, "%s %s with %s", init_utsname()->sysname,
+			init_utsname()->release, gadget->name);
+	len++;
+	mfr = kmalloc(len, GFP_KERNEL);
+	if (!mfr)
+		return NULL;
+	snprintf(mfr, len, "%s %s with %s", init_utsname()->sysname,
+			init_utsname()->release, gadget->name);
+	return mfr;
+}
+
+void usb_composite_overwrite_options(struct usb_composite_dev *cdev,
+		struct usb_composite_overwrite *covr)
+{
+	struct usb_device_descriptor	*desc = &cdev->desc;
+	struct usb_gadget_strings	*gstr = cdev->driver->strings[0];
+	struct usb_string		*dev_str = gstr->strings;
+
+	if (covr->idVendor)
+		desc->idVendor = cpu_to_le16(covr->idVendor);
+
+	if (covr->idProduct)
+		desc->idProduct = cpu_to_le16(covr->idProduct);
+
+	if (covr->bcdDevice)
+		desc->bcdDevice = cpu_to_le16(covr->bcdDevice);
+
+	if (covr->serial_number) {
+		desc->iSerialNumber = dev_str[USB_GADGET_SERIAL_IDX].id;
+		dev_str[USB_GADGET_SERIAL_IDX].s = covr->serial_number;
+	}
+	if (covr->manufacturer) {
+		desc->iManufacturer = dev_str[USB_GADGET_MANUFACTURER_IDX].id;
+		dev_str[USB_GADGET_MANUFACTURER_IDX].s = covr->manufacturer;
+
+	} else if (!strlen(dev_str[USB_GADGET_MANUFACTURER_IDX].s)) {
+		desc->iManufacturer = dev_str[USB_GADGET_MANUFACTURER_IDX].id;
+		cdev->def_manufacturer = composite_default_mfr(cdev->gadget);
+		dev_str[USB_GADGET_MANUFACTURER_IDX].s = cdev->def_manufacturer;
+	}
+
+	if (covr->product) {
+		desc->iProduct = dev_str[USB_GADGET_PRODUCT_IDX].id;
+		dev_str[USB_GADGET_PRODUCT_IDX].s = covr->product;
+	}
+}
+EXPORT_SYMBOL_GPL(usb_composite_overwrite_options);
 
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Brownell");
diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
index 7542a72ce51..e3a98929d34 100644
--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -12,6 +12,7 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/list.h>
 #include <linux/string.h>
 #include <linux/device.h>
@@ -53,7 +54,7 @@ usb_descriptor_fillbuf(void *buf, unsigned buflen,
 	}
 	return dest - (u8 *)buf;
 }
-
+EXPORT_SYMBOL_GPL(usb_descriptor_fillbuf);
 
 /**
  * usb_gadget_config_buf - builts a complete configuration descriptor
@@ -106,6 +107,7 @@ int usb_gadget_config_buf(
 	cp->bmAttributes |= USB_CONFIG_ATT_ONE;
 	return len;
 }
+EXPORT_SYMBOL_GPL(usb_gadget_config_buf);
 
 /**
  * usb_copy_descriptors - copy a vector of USB descriptors
@@ -155,4 +157,4 @@ usb_copy_descriptors(struct usb_descriptor_header **src)
 
 	return ret;
 }
-
+EXPORT_SYMBOL_GPL(usb_copy_descriptors);
diff --git a/drivers/usb/gadget/dbgp.c b/drivers/usb/gadget/dbgp.c
index 19d7bb0df75..87d16502816 100644
--- a/drivers/usb/gadget/dbgp.c
+++ b/drivers/usb/gadget/dbgp.c
@@ -13,9 +13,6 @@
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 
-/* See comments in "zero.c" */
-#include "epautoconf.c"
-
 #ifdef CONFIG_USB_G_DBGP_SERIAL
 #include "u_serial.c"
 #endif
@@ -292,7 +289,8 @@ fail_1:
 	return -ENODEV;
 }
 
-static int __init dbgp_bind(struct usb_gadget *gadget)
+static int __init dbgp_bind(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
 	int err, stp;
 
@@ -402,9 +400,10 @@ fail:
 	return err;
 }
 
-static struct usb_gadget_driver dbgp_driver = {
+static __refdata struct usb_gadget_driver dbgp_driver = {
 	.function = "dbgp",
 	.max_speed = USB_SPEED_HIGH,
+	.bind = dbgp_bind,
 	.unbind = dbgp_unbind,
 	.setup = dbgp_setup,
 	.disconnect = dbgp_disconnect,
@@ -416,7 +415,7 @@ static struct usb_gadget_driver dbgp_driver = {
 
 static int __init dbgp_init(void)
 {
-	return usb_gadget_probe_driver(&dbgp_driver, dbgp_bind);
+	return usb_gadget_probe_driver(&dbgp_driver);
 }
 
 static void __exit dbgp_exit(void)
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index afdbb1cbf5d..0f7541be28f 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -909,6 +909,7 @@ static int dummy_udc_start(struct usb_gadget *g,
 	dum->devstatus = 0;
 
 	dum->driver = driver;
+	dum->gadget.dev.driver = &driver->driver;
 	dev_dbg(udc_dev(dum), "binding gadget driver '%s'\n",
 			driver->driver.name);
 	return 0;
@@ -923,6 +924,7 @@ static int dummy_udc_stop(struct usb_gadget *g,
 	dev_dbg(udc_dev(dum), "unregister gadget driver '%s'\n",
 			driver->driver.name);
 
+	dum->gadget.dev.driver = NULL;
 	dum->driver = NULL;
 
 	return 0;
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 51f3d42f5a6..a777f7bd11b 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/device.h>
@@ -22,17 +23,6 @@
 
 #include "gadget_chips.h"
 
-
-/* we must assign addresses for configurable endpoints (like net2280) */
-static unsigned epnum;
-
-// #define MANY_ENDPOINTS
-#ifdef MANY_ENDPOINTS
-/* more than 15 configurable endpoints */
-static unsigned in_epnum;
-#endif
-
-
 /*
  * This should work with endpoints from controller drivers sharing the
  * same endpoint naming convention.  By example:
@@ -176,16 +166,14 @@ ep_matches (
 	if (isdigit (ep->name [2])) {
 		u8	num = simple_strtoul (&ep->name [2], NULL, 10);
 		desc->bEndpointAddress |= num;
-#ifdef	MANY_ENDPOINTS
 	} else if (desc->bEndpointAddress & USB_DIR_IN) {
-		if (++in_epnum > 15)
+		if (++gadget->in_epnum > 15)
 			return 0;
-		desc->bEndpointAddress = USB_DIR_IN | in_epnum;
-#endif
+		desc->bEndpointAddress = USB_DIR_IN | gadget->in_epnum;
 	} else {
-		if (++epnum > 15)
+		if (++gadget->out_epnum > 15)
 			return 0;
-		desc->bEndpointAddress |= epnum;
+		desc->bEndpointAddress |= gadget->out_epnum;
 	}
 
 	/* report (variable) full speed bulk maxpacket */
@@ -328,6 +316,7 @@ found_ep:
 	ep->comp_desc = NULL;
 	return ep;
 }
+EXPORT_SYMBOL_GPL(usb_ep_autoconfig_ss);
 
 /**
  * usb_ep_autoconfig() - choose an endpoint matching the
@@ -367,7 +356,7 @@ struct usb_ep *usb_ep_autoconfig(
 {
 	return usb_ep_autoconfig_ss(gadget, desc, NULL);
 }
-
+EXPORT_SYMBOL_GPL(usb_ep_autoconfig);
 
 /**
  * usb_ep_autoconfig_reset - reset endpoint autoconfig state
@@ -385,9 +374,7 @@ void usb_ep_autoconfig_reset (struct usb_gadget *gadget)
 	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
 		ep->driver_data = NULL;
 	}
-#ifdef	MANY_ENDPOINTS
-	in_epnum = 0;
-#endif
-	epnum = 0;
+	gadget->in_epnum = 0;
+	gadget->out_epnum = 0;
 }
-
+EXPORT_SYMBOL_GPL(usb_ep_autoconfig_reset);
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index a28f6ffcd0f..18c3f423706 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -14,8 +14,6 @@
 /* #define VERBOSE_DEBUG */
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
-
 
 #if defined USB_ETH_RNDIS
 #  undef USB_ETH_RNDIS
@@ -102,11 +100,6 @@ static inline bool has_rndis(void)
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-#include "composite.c"
-#include "usbstring.c"
-#include "config.c"
-#include "epautoconf.c"
-
 #include "f_ecm.c"
 #include "f_subset.c"
 #ifdef	USB_ETH_RNDIS
@@ -117,6 +110,7 @@ static inline bool has_rndis(void)
 #include "u_ether.c"
 
 /*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
 
 /* DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
  * Instead:  allocate your own, using normal USB-IF procedures.
@@ -195,17 +189,10 @@ static const struct usb_descriptor_header *otg_desc[] = {
 	NULL,
 };
 
-
-/* string IDs are assigned dynamically */
-
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
-
-static char manufacturer[50];
-
 static struct usb_string strings_dev[] = {
-	[STRING_MANUFACTURER_IDX].s = manufacturer,
-	[STRING_PRODUCT_IDX].s = PREFIX DRIVER_DESC,
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = PREFIX DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
 	{  } /* end of list */
 };
 
@@ -288,7 +275,6 @@ static struct usb_configuration eth_config_driver = {
 
 static int __init eth_bind(struct usb_composite_dev *cdev)
 {
-	int			gcnum;
 	struct usb_gadget	*gadget = cdev->gadget;
 	int			status;
 
@@ -323,42 +309,15 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
 		device_desc.bNumConfigurations = 2;
 	}
 
-	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0)
-		device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
-	else {
-		/* We assume that can_support_ecm() tells the truth;
-		 * but if the controller isn't recognized at all then
-		 * that assumption is a bit more likely to be wrong.
-		 */
-		dev_warn(&gadget->dev,
-				"controller '%s' not recognized; trying %s\n",
-				gadget->name,
-				eth_config_driver.label);
-		device_desc.bcdDevice =
-			cpu_to_le16(0x0300 | 0x0099);
-	}
-
-
 	/* Allocate string descriptor numbers ... note that string
 	 * contents can be overridden by the composite_dev glue.
 	 */
 
-	/* device descriptor strings: manufacturer, product */
-	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
-		init_utsname()->sysname, init_utsname()->release,
-		gadget->name);
-	status = usb_string_id(cdev);
-	if (status < 0)
-		goto fail;
-	strings_dev[STRING_MANUFACTURER_IDX].id = status;
-	device_desc.iManufacturer = status;
-
-	status = usb_string_id(cdev);
+	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail;
-	strings_dev[STRING_PRODUCT_IDX].id = status;
-	device_desc.iProduct = status;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 
 	/* register our configuration(s); RNDIS first, if it's used */
 	if (has_rndis()) {
@@ -372,6 +331,7 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
 	if (status < 0)
 		goto fail;
 
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n",
 			DRIVER_DESC);
 
@@ -388,11 +348,12 @@ static int __exit eth_unbind(struct usb_composite_dev *cdev)
 	return 0;
 }
 
-static struct usb_composite_driver eth_driver = {
+static __refdata struct usb_composite_driver eth_driver = {
 	.name		= "g_ether",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
 	.max_speed	= USB_SPEED_SUPER,
+	.bind		= eth_bind,
 	.unbind		= __exit_p(eth_unbind),
 };
 
@@ -402,7 +363,7 @@ MODULE_LICENSE("GPL");
 
 static int __init init(void)
 {
-	return usb_composite_probe(&eth_driver, eth_bind);
+	return usb_composite_probe(&eth_driver);
 }
 module_init(init);
 
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index 30b908f2a53..95bc94f8e57 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -897,10 +897,7 @@ ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
 		return -ENOMEM;
 
 	/* export host's Ethernet address in CDC format */
-	snprintf(ecm->ethaddr, sizeof ecm->ethaddr,
-		"%02X%02X%02X%02X%02X%02X",
-		ethaddr[0], ethaddr[1], ethaddr[2],
-		ethaddr[3], ethaddr[4], ethaddr[5]);
+	snprintf(ecm->ethaddr, sizeof ecm->ethaddr, "%pm", ethaddr);
 	ecm_string_defs[1].s = ecm->ethaddr;
 
 	ecm->port.cdc_filter = DEFAULT_FILTER;
diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c
index 16a8b1c15c6..511e527178e 100644
--- a/drivers/usb/gadget/f_hid.c
+++ b/drivers/usb/gadget/f_hid.c
@@ -10,7 +10,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
 #include <linux/module.h>
 #include <linux/hid.h>
 #include <linux/cdev.h>
@@ -18,6 +17,7 @@
 #include <linux/poll.h>
 #include <linux/uaccess.h>
 #include <linux/wait.h>
+#include <linux/sched.h>
 #include <linux/usb/g_hid.h>
 
 static int major, minors;
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 4f1142efa6d..3a7668bde3e 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -213,7 +213,6 @@
 #include <linux/spinlock.h>
 #include <linux/string.h>
 #include <linux/freezer.h>
-#include <linux/utsname.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
@@ -349,7 +348,6 @@ struct fsg_config {
 
 	const char *vendor_name;		/*  8 characters or less */
 	const char *product_name;		/* 16 characters or less */
-	u16 release;
 
 	char			can_stall;
 };
@@ -2773,18 +2771,7 @@ buffhds_first_it:
 	bh->next = common->buffhds;
 
 	/* Prepare inquiryString */
-	if (cfg->release != 0xffff) {
-		i = cfg->release;
-	} else {
-		i = usb_gadget_controller_number(gadget);
-		if (i >= 0) {
-			i = 0x0300 + i;
-		} else {
-			WARNING(common, "controller '%s' not recognized\n",
-				gadget->name);
-			i = 0x0399;
-		}
-	}
+	i = get_default_bcdDevice();
 	snprintf(common->inquiry_string, sizeof common->inquiry_string,
 		 "%-8s%-16s%04x", cfg->vendor_name ?: "Linux",
 		 /* Assume product name dependent on the first LUN */
@@ -3110,7 +3097,6 @@ fsg_config_from_params(struct fsg_config *cfg,
 	/* Let MSF use defaults */
 	cfg->vendor_name = 0;
 	cfg->product_name = 0;
-	cfg->release = 0xffff;
 
 	cfg->ops = NULL;
 	cfg->private_data = NULL;
diff --git a/drivers/usb/gadget/f_midi.c b/drivers/usb/gadget/f_midi.c
index 2f7e8f2930c..8ed1259fe80 100644
--- a/drivers/usb/gadget/f_midi.c
+++ b/drivers/usb/gadget/f_midi.c
@@ -21,7 +21,6 @@
 
 #include <linux/kernel.h>
 #include <linux/slab.h>
-#include <linux/utsname.h>
 #include <linux/device.h>
 
 #include <sound/core.h>
diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c
index aab8eded045..b651b529c67 100644
--- a/drivers/usb/gadget/f_ncm.c
+++ b/drivers/usb/gadget/f_ncm.c
@@ -1346,10 +1346,7 @@ int __init ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
 		return -ENOMEM;
 
 	/* export host's Ethernet address in CDC format */
-	snprintf(ncm->ethaddr, sizeof ncm->ethaddr,
-		"%02X%02X%02X%02X%02X%02X",
-		ethaddr[0], ethaddr[1], ethaddr[2],
-		ethaddr[3], ethaddr[4], ethaddr[5]);
+	snprintf(ncm->ethaddr, sizeof ncm->ethaddr, "%pm", ethaddr);
 	ncm_string_defs[1].s = ncm->ethaddr;
 
 	spin_lock_init(&ncm->lock);
diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c
index 5c1b68b63c9..3c126fde6e7 100644
--- a/drivers/usb/gadget/f_sourcesink.c
+++ b/drivers/usb/gadget/f_sourcesink.c
@@ -795,7 +795,7 @@ static int sourcesink_setup(struct usb_configuration *c,
 	u16			w_value = le16_to_cpu(ctrl->wValue);
 	u16			w_length = le16_to_cpu(ctrl->wLength);
 
-	req->length = USB_BUFSIZ;
+	req->length = USB_COMP_EP0_BUFSIZ;
 
 	/* composite driver infrastructure handles everything except
 	 * the two control test requests.
diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c
index 21ab474aca0..4060c0bd978 100644
--- a/drivers/usb/gadget/f_subset.c
+++ b/drivers/usb/gadget/f_subset.c
@@ -436,10 +436,7 @@ int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
 		return -ENOMEM;
 
 	/* export host's Ethernet address in CDC format */
-	snprintf(geth->ethaddr, sizeof geth->ethaddr,
-		"%02X%02X%02X%02X%02X%02X",
-		ethaddr[0], ethaddr[1], ethaddr[2],
-		ethaddr[3], ethaddr[4], ethaddr[5]);
+	snprintf(geth->ethaddr, sizeof geth->ethaddr, "%pm", ethaddr);
 	geth_string_defs[1].s = geth->ethaddr;
 
 	geth->port.cdc_filter = DEFAULT_FILTER;
diff --git a/drivers/usb/gadget/f_uac2.c b/drivers/usb/gadget/f_uac2.c
index e7cc4de93e3..d3c6cffccb7 100644
--- a/drivers/usb/gadget/f_uac2.c
+++ b/drivers/usb/gadget/f_uac2.c
@@ -463,7 +463,7 @@ snd_fail:
 	return err;
 }
 
-static int __devexit snd_uac2_remove(struct platform_device *pdev)
+static int snd_uac2_remove(struct platform_device *pdev)
 {
 	struct snd_card *card = platform_get_drvdata(pdev);
 
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index a896d73f7a9..3f7d640b675 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -251,26 +251,12 @@
 #include <linux/freezer.h>
 #include <linux/utsname.h>
 
+#include <linux/usb/composite.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 
 #include "gadget_chips.h"
 
-
-
-/*
- * Kbuild is not very cooperative with respect to linking separately
- * compiled library objects into one module.  So for now we won't use
- * separate compilation ... ensuring init/exit sections work to shrink
- * the runtime footprint, and giving us at least some parts of what
- * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
- */
-#include "usbstring.c"
-#include "config.c"
-#include "epautoconf.c"
-
-/*-------------------------------------------------------------------------*/
-
 #define DRIVER_DESC		"File-backed Storage Gadget"
 #define DRIVER_NAME		"g_file_storage"
 #define DRIVER_VERSION		"1 September 2010"
@@ -3213,7 +3199,6 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
 static int __init check_parameters(struct fsg_dev *fsg)
 {
 	int	prot;
-	int	gcnum;
 
 	/* Store the default values */
 	mod_data.transport_type = USB_PR_BULK;
@@ -3228,16 +3213,8 @@ static int __init check_parameters(struct fsg_dev *fsg)
 	if (gadget_is_at91(fsg->gadget))
 		mod_data.can_stall = 0;
 
-	if (mod_data.release == 0xffff) {	// Parameter wasn't set
-		gcnum = usb_gadget_controller_number(fsg->gadget);
-		if (gcnum >= 0)
-			mod_data.release = 0x0300 + gcnum;
-		else {
-			WARNING(fsg, "controller '%s' not recognized\n",
-				fsg->gadget->name);
-			mod_data.release = 0x0399;
-		}
-	}
+	if (mod_data.release == 0xffff)
+		mod_data.release = get_default_bcdDevice();
 
 	prot = simple_strtol(mod_data.protocol_parm, NULL, 0);
 
@@ -3331,7 +3308,8 @@ static int __init check_parameters(struct fsg_dev *fsg)
 }
 
 
-static int __init fsg_bind(struct usb_gadget *gadget)
+static int __init fsg_bind(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
 	struct fsg_dev		*fsg = the_fsg;
 	int			rc;
@@ -3603,9 +3581,10 @@ static void fsg_resume(struct usb_gadget *gadget)
 
 /*-------------------------------------------------------------------------*/
 
-static struct usb_gadget_driver		fsg_driver = {
+static __refdata struct usb_gadget_driver		fsg_driver = {
 	.max_speed	= USB_SPEED_SUPER,
 	.function	= (char *) fsg_string_product,
+	.bind		= fsg_bind,
 	.unbind		= fsg_unbind,
 	.disconnect	= fsg_disconnect,
 	.setup		= fsg_setup,
@@ -3653,7 +3632,8 @@ static int __init fsg_init(void)
 	if ((rc = fsg_alloc()) != 0)
 		return rc;
 	fsg = the_fsg;
-	if ((rc = usb_gadget_probe_driver(&fsg_driver, fsg_bind)) != 0)
+	rc = usb_gadget_probe_driver(&fsg_driver);
+	if (rc != 0)
 		kref_put(&fsg->ref, fsg_release);
 	return rc;
 }
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 3def828f85e..6ae70cba0c4 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -1255,7 +1255,7 @@ static int fsl_pullup(struct usb_gadget *gadget, int is_on)
 }
 
 static int fsl_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
 static int fsl_stop(struct usb_gadget_driver *driver);
 /* defined in gadget.h */
 static struct usb_gadget_ops fsl_gadget_ops = {
@@ -1951,7 +1951,7 @@ static irqreturn_t fsl_udc_irq(int irq, void *_udc)
  * Called by initialization code of gadget drivers
 *----------------------------------------------------------------*/
 static int fsl_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	int retval = -ENODEV;
 	unsigned long flags = 0;
@@ -1976,7 +1976,7 @@ static int fsl_start(struct usb_gadget_driver *driver,
 	spin_unlock_irqrestore(&udc_controller->lock, flags);
 
 	/* bind udc driver to gadget driver */
-	retval = bind(&udc_controller->gadget);
+	retval = bind(&udc_controller->gadget, driver);
 	if (retval) {
 		VDBG("bind to %s --> %d", driver->driver.name, retval);
 		udc_controller->gadget.dev.driver = NULL;
diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c
index cdd94540e1c..72cd5e6719d 100644
--- a/drivers/usb/gadget/fusb300_udc.c
+++ b/drivers/usb/gadget/fusb300_udc.c
@@ -1311,7 +1311,7 @@ static void init_controller(struct fusb300 *fusb300)
 static struct fusb300 *the_controller;
 
 static int fusb300_udc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	struct fusb300 *fusb300 = the_controller;
 	int retval;
@@ -1339,7 +1339,7 @@ static int fusb300_udc_start(struct usb_gadget_driver *driver,
 		goto error;
 	}
 
-	retval = bind(&fusb300->gadget);
+	retval = bind(&fusb300->gadget, driver);
 	if (retval) {
 		pr_err("bind to driver error (%d)\n", retval);
 		device_del(&fusb300->gadget.dev);
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index d3ace9002a6..3953dd4d718 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -13,7 +13,6 @@
 #define pr_fmt(fmt) "g_ffs: " fmt
 
 #include <linux/module.h>
-#include <linux/utsname.h>
 
 /*
  * kbuild is not very cooperative with respect to linking separately
@@ -22,12 +21,6 @@
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-
-#include "composite.c"
-#include "usbstring.c"
-#include "config.c"
-#include "epautoconf.c"
-
 #if defined CONFIG_USB_FUNCTIONFS_ETH || defined CONFIG_USB_FUNCTIONFS_RNDIS
 #  if defined USB_ETH_RNDIS
 #    undef USB_ETH_RNDIS
@@ -76,6 +69,8 @@ struct gfs_ffs_obj {
 	struct ffs_data *ffs_data;
 };
 
+USB_GADGET_COMPOSITE_OPTIONS();
+
 static struct usb_device_descriptor gfs_dev_desc = {
 	.bLength		= sizeof gfs_dev_desc,
 	.bDescriptorType	= USB_DT_DEVICE,
@@ -117,6 +112,9 @@ static const struct usb_descriptor_header *gfs_otg_desc[] = {
 
 /* String IDs are assigned dynamically */
 static struct usb_string gfs_strings[] = {
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
 #ifdef CONFIG_USB_FUNCTIONFS_RNDIS
 	{ .s = "FunctionFS + RNDIS" },
 #endif
@@ -163,13 +161,13 @@ static int gfs_bind(struct usb_composite_dev *cdev);
 static int gfs_unbind(struct usb_composite_dev *cdev);
 static int gfs_do_config(struct usb_configuration *c);
 
-static struct usb_composite_driver gfs_driver = {
+static __refdata struct usb_composite_driver gfs_driver = {
 	.name		= DRIVER_NAME,
 	.dev		= &gfs_dev_desc,
 	.strings	= gfs_dev_strings,
 	.max_speed	= USB_SPEED_HIGH,
+	.bind		= gfs_bind,
 	.unbind		= gfs_unbind,
-	.iProduct	= DRIVER_DESC,
 };
 
 static DEFINE_MUTEX(gfs_lock);
@@ -268,7 +266,7 @@ static int functionfs_ready_callback(struct ffs_data *ffs)
 	}
 	gfs_registered = true;
 
-	ret = usb_composite_probe(&gfs_driver, gfs_bind);
+	ret = usb_composite_probe(&gfs_driver);
 	if (unlikely(ret < 0))
 		gfs_registered = false;
 
@@ -357,6 +355,7 @@ static int gfs_bind(struct usb_composite_dev *cdev)
 	ret = usb_string_ids_tab(cdev, gfs_strings);
 	if (unlikely(ret < 0))
 		goto error;
+	gfs_dev_desc.iProduct = gfs_strings[USB_GADGET_PRODUCT_IDX].id;
 
 	for (i = func_num; --i; ) {
 		ret = functionfs_bind(ffs_tab[i].ffs_data, cdev);
@@ -369,9 +368,10 @@ static int gfs_bind(struct usb_composite_dev *cdev)
 
 	for (i = 0; i < ARRAY_SIZE(gfs_configurations); ++i) {
 		struct gfs_configuration *c = gfs_configurations + i;
+		int sid = USB_GADGET_FIRST_AVAIL_IDX + i;
 
-		c->c.label			= gfs_strings[i].s;
-		c->c.iConfiguration		= gfs_strings[i].id;
+		c->c.label			= gfs_strings[sid].s;
+		c->c.iConfiguration		= gfs_strings[sid].id;
 		c->c.bConfigurationValue	= 1 + i;
 		c->c.bmAttributes		= USB_CONFIG_ATT_SELFPOWER;
 
@@ -379,7 +379,7 @@ static int gfs_bind(struct usb_composite_dev *cdev)
 		if (unlikely(ret < 0))
 			goto error_unbind;
 	}
-
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	return 0;
 
 error_unbind:
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index b8b3a341121..bcd04bc66b9 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -15,6 +15,8 @@
 #ifndef __GADGET_CHIPS_H
 #define __GADGET_CHIPS_H
 
+#include <linux/usb/gadget.h>
+
 /*
  * NOTICE: the entries below are alphabetical and should be kept
  * that way.
@@ -25,106 +27,12 @@
  * If you have forgotten the alphabetical order let VIM/EMACS
  * do that for you.
  */
-#define gadget_is_amd5536udc(g)		(!strcmp("amd5536udc", (g)->name))
 #define gadget_is_at91(g)		(!strcmp("at91_udc", (g)->name))
-#define gadget_is_atmel_usba(g)		(!strcmp("atmel_usba_udc", (g)->name))
-#define gadget_is_ci13xxx_msm(g)	(!strcmp("ci13xxx_msm", (g)->name))
-#define gadget_is_ci13xxx_pci(g)	(!strcmp("ci13xxx_pci", (g)->name))
-#define gadget_is_dummy(g)		(!strcmp("dummy_udc", (g)->name))
-#define gadget_is_dwc3(g)		(!strcmp("dwc3-gadget", (g)->name))
-#define gadget_is_fsl_qe(g)		(!strcmp("fsl_qe_udc", (g)->name))
-#define gadget_is_fsl_usb2(g)		(!strcmp("fsl-usb2-udc", (g)->name))
 #define gadget_is_goku(g)		(!strcmp("goku_udc", (g)->name))
-#define gadget_is_imx(g)		(!strcmp("imx_udc", (g)->name))
-#define gadget_is_langwell(g)		(!strcmp("langwell_udc", (g)->name))
-#define gadget_is_lpc32xx(g)		(!strcmp("lpc32xx_udc", (g)->name))
-#define gadget_is_m66592(g)		(!strcmp("m66592_udc", (g)->name))
 #define gadget_is_musbhdrc(g)		(!strcmp("musb-hdrc", (g)->name))
-#define gadget_is_net2272(g)		(!strcmp("net2272", (g)->name))
 #define gadget_is_net2280(g)		(!strcmp("net2280", (g)->name))
-#define gadget_is_omap(g)		(!strcmp("omap_udc", (g)->name))
-#define gadget_is_pch(g)		(!strcmp("pch_udc", (g)->name))
 #define gadget_is_pxa(g)		(!strcmp("pxa25x_udc", (g)->name))
 #define gadget_is_pxa27x(g)		(!strcmp("pxa27x_udc", (g)->name))
-#define gadget_is_r8a66597(g)		(!strcmp("r8a66597_udc", (g)->name))
-#define gadget_is_renesas_usbhs(g)	(!strcmp("renesas_usbhs_udc", (g)->name))
-#define gadget_is_s3c2410(g)		(!strcmp("s3c2410_udc", (g)->name))
-#define gadget_is_s3c_hsotg(g)		(!strcmp("s3c-hsotg", (g)->name))
-#define gadget_is_s3c_hsudc(g)		(!strcmp("s3c-hsudc", (g)->name))
-
-/**
- * usb_gadget_controller_number - support bcdDevice id convention
- * @gadget: the controller being driven
- *
- * Return a 2-digit BCD value associated with the peripheral controller,
- * suitable for use as part of a bcdDevice value, or a negative error code.
- *
- * NOTE:  this convention is purely optional, and has no meaning in terms of
- * any USB specification.  If you want to use a different convention in your
- * gadget driver firmware -- maybe a more formal revision ID -- feel free.
- *
- * Hosts see these bcdDevice numbers, and are allowed (but not encouraged!)
- * to change their behavior accordingly.  For example it might help avoiding
- * some chip bug.
- */
-static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
-{
-	if (gadget_is_net2280(gadget))
-		return 0x01;
-	else if (gadget_is_dummy(gadget))
-		return 0x02;
-	else if (gadget_is_pxa(gadget))
-		return 0x03;
-	else if (gadget_is_goku(gadget))
-		return 0x06;
-	else if (gadget_is_omap(gadget))
-		return 0x08;
-	else if (gadget_is_pxa27x(gadget))
-		return 0x11;
-	else if (gadget_is_s3c2410(gadget))
-		return 0x12;
-	else if (gadget_is_at91(gadget))
-		return 0x13;
-	else if (gadget_is_imx(gadget))
-		return 0x14;
-	else if (gadget_is_musbhdrc(gadget))
-		return 0x16;
-	else if (gadget_is_atmel_usba(gadget))
-		return 0x18;
-	else if (gadget_is_fsl_usb2(gadget))
-		return 0x19;
-	else if (gadget_is_amd5536udc(gadget))
-		return 0x20;
-	else if (gadget_is_m66592(gadget))
-		return 0x21;
-	else if (gadget_is_fsl_qe(gadget))
-		return 0x22;
-	else if (gadget_is_ci13xxx_pci(gadget))
-		return 0x23;
-	else if (gadget_is_langwell(gadget))
-		return 0x24;
-	else if (gadget_is_r8a66597(gadget))
-		return 0x25;
-	else if (gadget_is_s3c_hsotg(gadget))
-		return 0x26;
-	else if (gadget_is_pch(gadget))
-		return 0x27;
-	else if (gadget_is_ci13xxx_msm(gadget))
-		return 0x28;
-	else if (gadget_is_renesas_usbhs(gadget))
-		return 0x29;
-	else if (gadget_is_s3c_hsudc(gadget))
-		return 0x30;
-	else if (gadget_is_net2272(gadget))
-		return 0x31;
-	else if (gadget_is_dwc3(gadget))
-		return 0x32;
-	else if (gadget_is_lpc32xx(gadget))
-		return 0x33;
-
-	return -ENOENT;
-}
-
 
 /**
  * gadget_supports_altsettings - return true if altsettings work
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 681bd038b1d..881aab86ae9 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -22,7 +22,6 @@
 
 #include <linux/kernel.h>
 #include <linux/slab.h>
-#include <linux/utsname.h>
 #include <linux/module.h>
 #include <linux/device.h>
 
@@ -31,16 +30,13 @@
 #include <sound/rawmidi.h>
 
 #include <linux/usb/ch9.h>
+#include <linux/usb/composite.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/audio.h>
 #include <linux/usb/midi.h>
 
 #include "gadget_chips.h"
 
-#include "composite.c"
-#include "usbstring.c"
-#include "config.c"
-#include "epautoconf.c"
 #include "f_midi.c"
 
 /*-------------------------------------------------------------------------*/
@@ -51,6 +47,8 @@ MODULE_LICENSE("GPL v2");
 static const char shortname[] = "g_midi";
 static const char longname[] = "MIDI Gadget";
 
+USB_GADGET_COMPOSITE_OPTIONS();
+
 static int index = SNDRV_DEFAULT_IDX1;
 module_param(index, int, S_IRUGO);
 MODULE_PARM_DESC(index, "Index value for the USB MIDI Gadget adapter.");
@@ -85,9 +83,7 @@ MODULE_PARM_DESC(out_ports, "Number of MIDI output ports");
 
 /* string IDs are assigned dynamically */
 
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
-#define STRING_DESCRIPTION_IDX		2
+#define STRING_DESCRIPTION_IDX		USB_GADGET_FIRST_AVAIL_IDX
 
 static struct usb_device_descriptor device_desc = {
 	.bLength =		USB_DT_DEVICE_SIZE,
@@ -102,8 +98,9 @@ static struct usb_device_descriptor device_desc = {
 };
 
 static struct usb_string strings_dev[] = {
-	[STRING_MANUFACTURER_IDX].s	= "Grey Innovation",
-	[STRING_PRODUCT_IDX].s		= "MIDI Gadget",
+	[USB_GADGET_MANUFACTURER_IDX].s	= "Grey Innovation",
+	[USB_GADGET_PRODUCT_IDX].s	= "MIDI Gadget",
+	[USB_GADGET_SERIAL_IDX].s	= "",
 	[STRING_DESCRIPTION_IDX].s	= "MIDI",
 	{  } /* end of list */
 };
@@ -140,61 +137,35 @@ static int __init midi_bind_config(struct usb_configuration *c)
 
 static int __init midi_bind(struct usb_composite_dev *cdev)
 {
-	struct usb_gadget *gadget = cdev->gadget;
-	int gcnum, status;
-
-	status = usb_string_id(cdev);
-	if (status < 0)
-		return status;
-	strings_dev[STRING_MANUFACTURER_IDX].id = status;
-	device_desc.iManufacturer = status;
+	int status;
 
-	status = usb_string_id(cdev);
+	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		return status;
-	strings_dev[STRING_PRODUCT_IDX].id = status;
-	device_desc.iProduct = status;
-
-	/* config description */
-	status = usb_string_id(cdev);
-	if (status < 0)
-		return status;
-	strings_dev[STRING_DESCRIPTION_IDX].id = status;
-
-	midi_config.iConfiguration = status;
-
-	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum < 0) {
-		/* gmidi is so simple (no altsettings) that
-		 * it SHOULD NOT have problems with bulk-capable hardware.
-		 * so warn about unrecognized controllers, don't panic.
-		 */
-		pr_warning("%s: controller '%s' not recognized\n",
-			   __func__, gadget->name);
-		device_desc.bcdDevice = cpu_to_le16(0x9999);
-	} else {
-		device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
-	}
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
+	midi_config.iConfiguration = strings_dev[STRING_DESCRIPTION_IDX].id;
 
 	status = usb_add_config(cdev, &midi_config, midi_bind_config);
 	if (status < 0)
 		return status;
-
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	pr_info("%s\n", longname);
 	return 0;
 }
 
-static struct usb_composite_driver midi_driver = {
+static __refdata struct usb_composite_driver midi_driver = {
 	.name		= (char *) longname,
 	.dev		= &device_desc,
 	.strings	= dev_strings,
 	.max_speed	= USB_SPEED_HIGH,
+	.bind		= midi_bind,
 	.unbind		= __exit_p(midi_unbind),
 };
 
 static int __init midi_init(void)
 {
-	return usb_composite_probe(&midi_driver, midi_bind);
+	return usb_composite_probe(&midi_driver);
 }
 module_init(midi_init);
 
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index 9fd7886cfa9..51037cb7860 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -994,7 +994,7 @@ static int goku_get_frame(struct usb_gadget *_gadget)
 }
 
 static int goku_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
 static int goku_stop(struct usb_gadget_driver *driver);
 
 static const struct usb_gadget_ops goku_ops = {
@@ -1348,7 +1348,7 @@ static struct goku_udc	*the_controller;
  * the driver might get unbound.
  */
 static int goku_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	struct goku_udc	*dev = the_controller;
 	int			retval;
@@ -1368,7 +1368,7 @@ static int goku_start(struct usb_gadget_driver *driver,
 	driver->driver.bus = NULL;
 	dev->driver = driver;
 	dev->gadget.dev.driver = &driver->driver;
-	retval = bind(&dev->gadget);
+	retval = bind(&dev->gadget, driver);
 	if (retval) {
 		DBG(dev, "bind to driver %s --> error %d\n",
 				driver->driver.name, retval);
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
index 3493adf064f..74130f6c12c 100644
--- a/drivers/usb/gadget/hid.c
+++ b/drivers/usb/gadget/hid.c
@@ -15,7 +15,10 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/list.h>
+#include <linux/module.h>
+#include <linux/usb/composite.h>
 
+#include "gadget_chips.h"
 #define DRIVER_DESC		"HID Gadget"
 #define DRIVER_VERSION		"2010/03/16"
 
@@ -33,12 +36,6 @@
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-
-#include "composite.c"
-#include "usbstring.c"
-#include "config.c"
-#include "epautoconf.c"
-
 #include "f_hid.c"
 
 
@@ -50,6 +47,7 @@ struct hidg_func_node {
 static LIST_HEAD(hidg_func_list);
 
 /*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
 
 static struct usb_device_descriptor device_desc = {
 	.bLength =		sizeof device_desc,
@@ -92,15 +90,10 @@ static const struct usb_descriptor_header *otg_desc[] = {
 
 
 /* string IDs are assigned dynamically */
-
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
-
-static char manufacturer[50];
-
 static struct usb_string strings_dev[] = {
-	[STRING_MANUFACTURER_IDX].s = manufacturer,
-	[STRING_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
 	{  } /* end of list */
 };
 
@@ -150,7 +143,7 @@ static int __init hid_bind(struct usb_composite_dev *cdev)
 {
 	struct usb_gadget *gadget = cdev->gadget;
 	struct list_head *tmp;
-	int status, gcnum, funcs = 0;
+	int status, funcs = 0;
 
 	list_for_each(tmp, &hidg_func_list)
 		funcs++;
@@ -163,38 +156,22 @@ static int __init hid_bind(struct usb_composite_dev *cdev)
 	if (status < 0)
 		return status;
 
-	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0)
-		device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
-	else
-		device_desc.bcdDevice = cpu_to_le16(0x0300 | 0x0099);
-
-
 	/* Allocate string descriptor numbers ... note that string
 	 * contents can be overridden by the composite_dev glue.
 	 */
 
-	/* device descriptor strings: manufacturer, product */
-	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
-		init_utsname()->sysname, init_utsname()->release,
-		gadget->name);
-	status = usb_string_id(cdev);
-	if (status < 0)
-		return status;
-	strings_dev[STRING_MANUFACTURER_IDX].id = status;
-	device_desc.iManufacturer = status;
-
-	status = usb_string_id(cdev);
+	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		return status;
-	strings_dev[STRING_PRODUCT_IDX].id = status;
-	device_desc.iProduct = status;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 
 	/* register our configuration */
 	status = usb_add_config(cdev, &config_driver, do_config);
 	if (status < 0)
 		return status;
 
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	dev_info(&gadget->dev, DRIVER_DESC ", version: " DRIVER_VERSION "\n");
 
 	return 0;
@@ -242,11 +219,12 @@ static int __devexit hidg_plat_driver_remove(struct platform_device *pdev)
 /****************************** Some noise ******************************/
 
 
-static struct usb_composite_driver hidg_driver = {
+static __refdata struct usb_composite_driver hidg_driver = {
 	.name		= "g_hid",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
 	.max_speed	= USB_SPEED_HIGH,
+	.bind		= hid_bind,
 	.unbind		= __exit_p(hid_unbind),
 };
 
@@ -272,7 +250,7 @@ static int __init hidg_init(void)
 	if (status < 0)
 		return status;
 
-	status = usb_composite_probe(&hidg_driver, hid_bind);
+	status = usb_composite_probe(&hidg_driver);
 	if (status < 0)
 		platform_driver_unregister(&hidg_plat_driver);
 
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index e58b1644297..4bb6d53f2de 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -828,7 +828,6 @@ ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 		if (value == 0)
 			data->state = STATE_EP_ENABLED;
 		break;
-#ifdef	CONFIG_USB_GADGET_DUALSPEED
 	case USB_SPEED_HIGH:
 		/* fails if caller didn't provide that descriptor... */
 		ep->desc = &data->hs_desc;
@@ -836,7 +835,6 @@ ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 		if (value == 0)
 			data->state = STATE_EP_ENABLED;
 		break;
-#endif
 	default:
 		DBG(data->dev, "unconnected, %s init abandoned\n",
 				data->name);
@@ -1324,7 +1322,6 @@ static const struct file_operations ep0_io_operations = {
  * Unrecognized ep0 requests may be handled in user space.
  */
 
-#ifdef	CONFIG_USB_GADGET_DUALSPEED
 static void make_qualifier (struct dev_data *dev)
 {
 	struct usb_qualifier_descriptor		qual;
@@ -1347,7 +1344,6 @@ static void make_qualifier (struct dev_data *dev)
 
 	memcpy (dev->rbuf, &qual, sizeof qual);
 }
-#endif
 
 static int
 config_buf (struct dev_data *dev, u8 type, unsigned index)
@@ -1427,7 +1423,6 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 			dev->dev->bMaxPacketSize0 = dev->gadget->ep0->maxpacket;
 			req->buf = dev->dev;
 			break;
-#ifdef	CONFIG_USB_GADGET_DUALSPEED
 		case USB_DT_DEVICE_QUALIFIER:
 			if (!dev->hs_config)
 				break;
@@ -1437,7 +1432,6 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 			break;
 		case USB_DT_OTHER_SPEED_CONFIG:
 			// FALLTHROUGH
-#endif
 		case USB_DT_CONFIG:
 			value = config_buf (dev,
 					w_value >> 8,
@@ -1685,8 +1679,8 @@ gadgetfs_unbind (struct usb_gadget *gadget)
 
 static struct dev_data		*the_device;
 
-static int
-gadgetfs_bind (struct usb_gadget *gadget)
+static int gadgetfs_bind(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
 	struct dev_data		*dev = the_device;
 
@@ -1763,12 +1757,8 @@ gadgetfs_suspend (struct usb_gadget *gadget)
 }
 
 static struct usb_gadget_driver gadgetfs_driver = {
-#ifdef	CONFIG_USB_GADGET_DUALSPEED
-	.max_speed	= USB_SPEED_HIGH,
-#else
-	.max_speed	= USB_SPEED_FULL,
-#endif
 	.function	= (char *) driver_desc,
+	.bind		= gadgetfs_bind,
 	.unbind		= gadgetfs_unbind,
 	.setup		= gadgetfs_setup,
 	.disconnect	= gadgetfs_disconnect,
@@ -1783,7 +1773,8 @@ static struct usb_gadget_driver gadgetfs_driver = {
 
 static void gadgetfs_nop(struct usb_gadget *arg) { }
 
-static int gadgetfs_probe (struct usb_gadget *gadget)
+static int gadgetfs_probe(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
 	CHIP = gadget->name;
 	return -EISNAM;
@@ -1791,6 +1782,7 @@ static int gadgetfs_probe (struct usb_gadget *gadget)
 
 static struct usb_gadget_driver probe_driver = {
 	.max_speed	= USB_SPEED_HIGH,
+	.bind		= gadgetfs_probe,
 	.unbind		= gadgetfs_nop,
 	.setup		= (void *)gadgetfs_nop,
 	.disconnect	= gadgetfs_nop,
@@ -1900,7 +1892,12 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 
 	/* triggers gadgetfs_bind(); then we can enumerate. */
 	spin_unlock_irq (&dev->lock);
-	value = usb_gadget_probe_driver(&gadgetfs_driver, gadgetfs_bind);
+	if (dev->hs_config)
+		gadgetfs_driver.max_speed = USB_SPEED_HIGH;
+	else
+		gadgetfs_driver.max_speed = USB_SPEED_FULL;
+
+	value = usb_gadget_probe_driver(&gadgetfs_driver);
 	if (value != 0) {
 		kfree (dev->buf);
 		dev->buf = NULL;
@@ -2039,7 +2036,7 @@ gadgetfs_fill_super (struct super_block *sb, void *opts, int silent)
 		return -ESRCH;
 
 	/* fake probe to determine $CHIP */
-	(void) usb_gadget_probe_driver(&probe_driver, gadgetfs_probe);
+	usb_gadget_probe_driver(&probe_driver);
 	if (!CHIP)
 		return -ENODEV;
 
diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c
index f1ec99e69cb..f696fb9b136 100644
--- a/drivers/usb/gadget/lpc32xx_udc.c
+++ b/drivers/usb/gadget/lpc32xx_udc.c
@@ -141,8 +141,6 @@ struct lpc32xx_ep {
 	u32                     totalints;
 
 	bool			wedge;
-
-	const struct usb_endpoint_descriptor *desc;
 };
 
 /*
@@ -556,10 +554,8 @@ static int proc_udc_show(struct seq_file *s, void *unused)
 
 	if (udc->enabled && udc->vbus) {
 		proc_ep_show(s, &udc->ep[0]);
-		list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
-			if (ep->desc)
-				proc_ep_show(s, ep);
-		}
+		list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list)
+			proc_ep_show(s, ep);
 	}
 
 	spin_unlock_irqrestore(&udc->lock, flags);
@@ -1453,7 +1449,6 @@ static void udc_reinit(struct lpc32xx_udc *udc)
 
 		if (i != 0)
 			list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
-		ep->desc = NULL;
 		ep->ep.maxpacket = ep->maxpacket;
 		INIT_LIST_HEAD(&ep->queue);
 		ep->req_pending = 0;
@@ -1515,7 +1510,7 @@ static void nuke(struct lpc32xx_ep *ep, int status)
 		done(ep, req, status);
 	}
 
-	if (ep->desc && status == -ESHUTDOWN) {
+	if (status == -ESHUTDOWN) {
 		uda_disable_hwepint(ep->udc, ep->hwep_num);
 		udc_disable_hwep(ep->udc, ep->hwep_num);
 	}
@@ -1658,9 +1653,6 @@ static int lpc32xx_ep_disable(struct usb_ep *_ep)
 
 	nuke(ep, -ESHUTDOWN);
 
-	/* restore the endpoint's pristine config */
-	ep->desc = NULL;
-
 	/* Clear all DMA statuses for this EP */
 	udc_ep_dma_disable(udc, ep->hwep_num);
 	writel(1 << ep->hwep_num, USBD_EOTINTCLR(udc->udp_baseaddr));
@@ -1696,7 +1688,7 @@ static int lpc32xx_ep_enable(struct usb_ep *_ep,
 	unsigned long flags;
 
 	/* Verify EP data */
-	if ((!_ep) || (!ep) || (!desc) || (ep->desc) ||
+	if ((!_ep) || (!ep) || (!desc) ||
 	    (desc->bDescriptorType != USB_DT_ENDPOINT)) {
 		dev_dbg(udc->dev, "bad ep or descriptor\n");
 		return -EINVAL;
@@ -1754,7 +1746,6 @@ static int lpc32xx_ep_enable(struct usb_ep *_ep,
 
 	/* Initialize endpoint to match the selected descriptor */
 	ep->is_in = (desc->bEndpointAddress & USB_DIR_IN) != 0;
-	ep->desc = desc;
 	ep->ep.maxpacket = maxpacket;
 
 	/* Map hardware endpoint from base and direction */
@@ -1837,7 +1828,7 @@ static int lpc32xx_ep_queue(struct usb_ep *_ep,
 
 	udc = ep->udc;
 
-	if (!_ep || (!ep->desc && ep->hwep_num_base != 0)) {
+	if (!_ep) {
 		dev_dbg(udc->dev, "invalid ep\n");
 		return -EINVAL;
 	}
@@ -1976,7 +1967,7 @@ static int lpc32xx_ep_set_halt(struct usb_ep *_ep, int value)
 	struct lpc32xx_udc *udc = ep->udc;
 	unsigned long flags;
 
-	if ((!ep) || (ep->desc == NULL) || (ep->hwep_num <= 1))
+	if ((!ep) || (ep->hwep_num <= 1))
 		return -EINVAL;
 
 	/* Don't halt an IN EP */
@@ -2262,7 +2253,7 @@ static int udc_get_status(struct lpc32xx_udc *udc, u16 reqtype, u16 wIndex)
 	case USB_RECIP_ENDPOINT:
 		tmp = wIndex & USB_ENDPOINT_NUMBER_MASK;
 		ep = &udc->ep[tmp];
-		if ((tmp == 0) || (tmp >= NUM_ENDPOINTS) || (tmp && !ep->desc))
+		if ((tmp == 0) || (tmp >= NUM_ENDPOINTS))
 			return -EOPNOTSUPP;
 
 		if (wIndex & USB_DIR_IN) {
@@ -2599,9 +2590,8 @@ static int lpc32xx_pullup(struct usb_gadget *gadget, int is_on)
 	return 0;
 }
 
-static int lpc32xx_start(struct usb_gadget_driver *driver,
-			 int (*bind)(struct usb_gadget *));
-static int lpc32xx_stop(struct usb_gadget_driver *driver);
+static int lpc32xx_start(struct usb_gadget *, struct usb_gadget_driver *);
+static int lpc32xx_stop(struct usb_gadget *, struct usb_gadget_driver *);
 
 static const struct usb_gadget_ops lpc32xx_udc_ops = {
 	.get_frame		= lpc32xx_get_frame,
@@ -2609,8 +2599,8 @@ static const struct usb_gadget_ops lpc32xx_udc_ops = {
 	.set_selfpowered	= lpc32xx_set_selfpowered,
 	.vbus_session		= lpc32xx_vbus_session,
 	.pullup			= lpc32xx_pullup,
-	.start			= lpc32xx_start,
-	.stop			= lpc32xx_stop,
+	.udc_start		= lpc32xx_start,
+	.udc_stop		= lpc32xx_stop,
 };
 
 static void nop_release(struct device *dev)
@@ -2618,10 +2608,9 @@ static void nop_release(struct device *dev)
 	/* nothing to free */
 }
 
-static struct lpc32xx_udc controller = {
+static const struct lpc32xx_udc controller_template = {
 	.gadget = {
 		.ops	= &lpc32xx_udc_ops,
-		.ep0	= &controller.ep[0].ep,
 		.name	= driver_name,
 		.dev	= {
 			.init_name = "gadget",
@@ -2633,7 +2622,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep0",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 64,
 		.hwep_num_base	= 0,
 		.hwep_num	= 0, /* Can be 0 or 1, has special handling */
@@ -2645,7 +2633,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep1-int",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 64,
 		.hwep_num_base	= 2,
 		.hwep_num	= 0, /* 2 or 3, will be set later */
@@ -2657,7 +2644,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep2-bulk",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 64,
 		.hwep_num_base	= 4,
 		.hwep_num	= 0, /* 4 or 5, will be set later */
@@ -2669,7 +2655,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep3-iso",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 1023,
 		.hwep_num_base	= 6,
 		.hwep_num	= 0, /* 6 or 7, will be set later */
@@ -2681,7 +2666,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep4-int",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 64,
 		.hwep_num_base	= 8,
 		.hwep_num	= 0, /* 8 or 9, will be set later */
@@ -2693,7 +2677,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep5-bulk",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 64,
 		.hwep_num_base	= 10,
 		.hwep_num	= 0, /* 10 or 11, will be set later */
@@ -2705,7 +2688,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep6-iso",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 1023,
 		.hwep_num_base	= 12,
 		.hwep_num	= 0, /* 12 or 13, will be set later */
@@ -2717,7 +2699,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep7-int",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 64,
 		.hwep_num_base	= 14,
 		.hwep_num	= 0,
@@ -2729,7 +2710,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep8-bulk",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 64,
 		.hwep_num_base	= 16,
 		.hwep_num	= 0,
@@ -2741,7 +2721,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep9-iso",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 1023,
 		.hwep_num_base	= 18,
 		.hwep_num	= 0,
@@ -2753,7 +2732,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep10-int",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 64,
 		.hwep_num_base	= 20,
 		.hwep_num	= 0,
@@ -2765,7 +2743,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep11-bulk",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 64,
 		.hwep_num_base	= 22,
 		.hwep_num	= 0,
@@ -2777,7 +2754,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep12-iso",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 1023,
 		.hwep_num_base	= 24,
 		.hwep_num	= 0,
@@ -2789,7 +2765,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep13-int",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 64,
 		.hwep_num_base	= 26,
 		.hwep_num	= 0,
@@ -2801,7 +2776,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep14-bulk",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 64,
 		.hwep_num_base	= 28,
 		.hwep_num	= 0,
@@ -2813,7 +2787,6 @@ static struct lpc32xx_udc controller = {
 			.name	= "ep15-bulk",
 			.ops	= &lpc32xx_ep_ops,
 		},
-		.udc		= &controller,
 		.maxpacket	= 1023,
 		.hwep_num_base	= 30,
 		.hwep_num	= 0,
@@ -2987,14 +2960,13 @@ static irqreturn_t lpc32xx_usb_vbus_irq(int irq, void *_udc)
 	return IRQ_HANDLED;
 }
 
-static int lpc32xx_start(struct usb_gadget_driver *driver,
-			 int (*bind)(struct usb_gadget *))
+static int lpc32xx_start(struct usb_gadget *gadget,
+			 struct usb_gadget_driver *driver)
 {
-	struct lpc32xx_udc *udc = &controller;
-	int retval, i;
+	struct lpc32xx_udc *udc = to_udc(gadget);
+	int i;
 
-	if (!driver || driver->max_speed < USB_SPEED_FULL ||
-	    !bind || !driver->setup) {
+	if (!driver || driver->max_speed < USB_SPEED_FULL || !driver->setup) {
 		dev_err(udc->dev, "bad parameter.\n");
 		return -EINVAL;
 	}
@@ -3011,18 +2983,6 @@ static int lpc32xx_start(struct usb_gadget_driver *driver,
 	udc->selfpowered = 1;
 	udc->vbus = 0;
 
-	retval = bind(&udc->gadget);
-	if (retval) {
-		dev_err(udc->dev, "bind() returned %d\n", retval);
-		udc->enabled = 0;
-		udc->selfpowered = 0;
-		udc->driver = NULL;
-		udc->gadget.dev.driver = NULL;
-		return retval;
-	}
-
-	dev_dbg(udc->dev, "bound to %s\n", driver->driver.name);
-
 	/* Force VBUS process once to check for cable insertion */
 	udc->last_vbus = udc->vbus = 0;
 	schedule_work(&udc->vbus_job);
@@ -3034,22 +2994,19 @@ static int lpc32xx_start(struct usb_gadget_driver *driver,
 	return 0;
 }
 
-static int lpc32xx_stop(struct usb_gadget_driver *driver)
+static int lpc32xx_stop(struct usb_gadget *gadget,
+			struct usb_gadget_driver *driver)
 {
 	int i;
-	struct lpc32xx_udc *udc = &controller;
+	struct lpc32xx_udc *udc = to_udc(gadget);
 
-	if (!driver || driver != udc->driver || !driver->unbind)
+	if (!driver || driver != udc->driver)
 		return -EINVAL;
 
-	/* Disable USB pullup */
-	isp1301_pullup_enable(udc, 0, 1);
-
 	for (i = IRQ_USB_LP; i <= IRQ_USB_ATX; i++)
 		disable_irq(udc->udp_irq[i]);
 
 	if (udc->clocked) {
-
 		spin_lock(&udc->lock);
 		stop_activity(udc);
 		spin_unlock(&udc->lock);
@@ -3069,20 +3026,16 @@ static int lpc32xx_stop(struct usb_gadget_driver *driver)
 	}
 
 	udc->enabled = 0;
-	pullup(udc, 0);
-
-	driver->unbind(&udc->gadget);
 	udc->gadget.dev.driver = NULL;
 	udc->driver = NULL;
 
-	dev_dbg(udc->dev, "unbound from %s\n", driver->driver.name);
 	return 0;
 }
 
 static void lpc32xx_udc_shutdown(struct platform_device *dev)
 {
 	/* Force disconnect on reboot */
-	struct lpc32xx_udc *udc = &controller;
+	struct lpc32xx_udc *udc = platform_get_drvdata(dev);
 
 	pullup(udc, 0);
 }
@@ -3120,12 +3073,21 @@ static u64 lpc32xx_usbd_dmamask = ~(u32) 0x7F;
 static int __init lpc32xx_udc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct lpc32xx_udc *udc = &controller;
+	struct lpc32xx_udc *udc;
 	int retval, i;
 	struct resource *res;
 	dma_addr_t dma_handle;
 	struct device_node *isp1301_node;
 
+	udc = kzalloc(sizeof(*udc), GFP_KERNEL);
+	if (!udc)
+		return -ENOMEM;
+
+	memcpy(udc, &controller_template, sizeof(*udc));
+	for (i = 0; i <= 15; i++)
+		udc->ep[i].udc = udc;
+	udc->gadget.ep0 = &udc->ep[0].ep;
+
 	/* init software state */
 	udc->gadget.dev.parent = dev;
 	udc->pdev = pdev;
@@ -3140,8 +3102,10 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev)
 	}
 
 	udc->isp1301_i2c_client = isp1301_get_client(isp1301_node);
-	if (!udc->isp1301_i2c_client)
-		return -EPROBE_DEFER;
+	if (!udc->isp1301_i2c_client) {
+		retval = -EPROBE_DEFER;
+		goto phy_fail;
+	}
 
 	dev_info(udc->dev, "ISP1301 I2C device at address 0x%x\n",
 		 udc->isp1301_i2c_client->addr);
@@ -3160,8 +3124,10 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev)
 	 *  IORESOURCE_IRQ, USB transceiver interrupt number
 	 */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENXIO;
+	if (!res) {
+		retval = -ENXIO;
+		goto resource_fail;
+	}
 
 	spin_lock_init(&udc->lock);
 
@@ -3171,7 +3137,8 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev)
 		if (udc->udp_irq[i] < 0) {
 			dev_err(udc->dev,
 				"irq resource %d not available!\n", i);
-			return udc->udp_irq[i];
+			retval = udc->udp_irq[i];
+			goto irq_fail;
 		}
 	}
 
@@ -3179,7 +3146,8 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev)
 	udc->io_p_size = resource_size(res);
 	if (!request_mem_region(udc->io_p_start, udc->io_p_size, driver_name)) {
 		dev_err(udc->dev, "someone's using UDC memory\n");
-		return -EBUSY;
+		retval = -EBUSY;
+		goto request_mem_region_fail;
 	}
 
 	udc->udp_baseaddr = ioremap(udc->io_p_start, udc->io_p_size);
@@ -3208,7 +3176,7 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev)
 	udc->usb_otg_clk = clk_get(&pdev->dev, "ck_usb_otg");
 	if (IS_ERR(udc->usb_otg_clk)) {
 		dev_err(udc->dev, "failed to acquire USB otg clock\n");
-		retval = PTR_ERR(udc->usb_slv_clk);
+		retval = PTR_ERR(udc->usb_otg_clk);
 		goto usb_otg_clk_get_fail;
 	}
 
@@ -3376,7 +3344,11 @@ pll_get_fail:
 io_map_fail:
 	release_mem_region(udc->io_p_start, udc->io_p_size);
 	dev_err(udc->dev, "%s probe failed, %d\n", driver_name, retval);
-
+request_mem_region_fail:
+irq_fail:
+resource_fail:
+phy_fail:
+	kfree(udc);
 	return retval;
 }
 
@@ -3414,6 +3386,7 @@ static int __devexit lpc32xx_udc_remove(struct platform_device *pdev)
 	clk_put(udc->usb_pll_clk);
 	iounmap(udc->udp_baseaddr);
 	release_mem_region(udc->io_p_start, udc->io_p_size);
+	kfree(udc);
 
 	return 0;
 }
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index cf6bd626f3f..b6401f1b56c 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -1466,7 +1466,7 @@ static struct usb_ep_ops m66592_ep_ops = {
 static struct m66592 *the_controller;
 
 static int m66592_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	struct m66592 *m66592 = the_controller;
 	int retval;
@@ -1492,7 +1492,7 @@ static int m66592_start(struct usb_gadget_driver *driver,
 		goto error;
 	}
 
-	retval = bind(&m66592->gadget);
+	retval = bind(&m66592->gadget, driver);
 	if (retval) {
 		pr_err("bind to driver error (%d)\n", retval);
 		device_del(&m66592->gadget.dev);
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index 1f376eba31f..080e577773d 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -29,9 +29,8 @@
 
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
 #include <linux/usb/ch9.h>
-
+#include <linux/module.h>
 
 /*-------------------------------------------------------------------------*/
 
@@ -47,14 +46,10 @@
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-
-#include "composite.c"
-#include "usbstring.c"
-#include "config.c"
-#include "epautoconf.c"
 #include "f_mass_storage.c"
 
 /*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
 
 static struct usb_device_descriptor msg_device_desc = {
 	.bLength =		sizeof msg_device_desc,
@@ -85,6 +80,22 @@ static const struct usb_descriptor_header *otg_desc[] = {
 	NULL,
 };
 
+static struct usb_string strings_dev[] = {
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+	.language       = 0x0409,       /* en-us */
+	.strings        = strings_dev,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
 
 /****************************** Configurations ******************************/
 
@@ -143,10 +154,15 @@ static int __init msg_bind(struct usb_composite_dev *cdev)
 {
 	int status;
 
-	status = usb_add_config(cdev, &msg_config_driver, msg_do_config);
+	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		return status;
+	msg_device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 
+	status = usb_add_config(cdev, &msg_config_driver, msg_do_config);
+	if (status < 0)
+		return status;
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	dev_info(&cdev->gadget->dev,
 		 DRIVER_DESC ", version: " DRIVER_VERSION "\n");
 	set_bit(0, &msg_registered);
@@ -156,12 +172,13 @@ static int __init msg_bind(struct usb_composite_dev *cdev)
 
 /****************************** Some noise ******************************/
 
-static struct usb_composite_driver msg_driver = {
+static __refdata struct usb_composite_driver msg_driver = {
 	.name		= "g_mass_storage",
 	.dev		= &msg_device_desc,
-	.iProduct	= DRIVER_DESC,
 	.max_speed	= USB_SPEED_SUPER,
 	.needs_serial	= 1,
+	.strings	= dev_strings,
+	.bind		= msg_bind,
 };
 
 MODULE_DESCRIPTION(DRIVER_DESC);
@@ -170,7 +187,7 @@ MODULE_LICENSE("GPL");
 
 static int __init msg_init(void)
 {
-	return usb_composite_probe(&msg_driver, msg_bind);
+	return usb_composite_probe(&msg_driver);
 }
 module_init(msg_init);
 
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index c37fb33a3d1..88472bf7dbb 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -14,10 +14,8 @@
 
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
 #include <linux/module.h>
 
-
 #if defined USB_ETH_RNDIS
 #  undef USB_ETH_RNDIS
 #endif
@@ -42,12 +40,6 @@ MODULE_LICENSE("GPL");
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-
-#include "composite.c"
-#include "usbstring.c"
-#include "config.c"
-#include "epautoconf.c"
-
 #include "f_mass_storage.c"
 
 #include "u_serial.c"
@@ -61,7 +53,7 @@ MODULE_LICENSE("GPL");
 #endif
 #include "u_ether.c"
 
-
+USB_GADGET_COMPOSITE_OPTIONS();
 
 /***************************** Device Descriptor ****************************/
 
@@ -112,21 +104,16 @@ static const struct usb_descriptor_header *otg_desc[] = {
 
 
 enum {
-#ifdef CONFIG_USB_G_MULTI_RNDIS
-	MULTI_STRING_RNDIS_CONFIG_IDX,
-#endif
-#ifdef CONFIG_USB_G_MULTI_CDC
+	MULTI_STRING_RNDIS_CONFIG_IDX = USB_GADGET_FIRST_AVAIL_IDX,
 	MULTI_STRING_CDC_CONFIG_IDX,
-#endif
 };
 
 static struct usb_string strings_dev[] = {
-#ifdef CONFIG_USB_G_MULTI_RNDIS
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
 	[MULTI_STRING_RNDIS_CONFIG_IDX].s = "Multifunction with RNDIS",
-#endif
-#ifdef CONFIG_USB_G_MULTI_CDC
 	[MULTI_STRING_CDC_CONFIG_IDX].s   = "Multifunction with CDC ECM",
-#endif
 	{  } /* end of list */
 };
 
@@ -260,7 +247,7 @@ static int cdc_config_register(struct usb_composite_dev *cdev)
 static int __ref multi_bind(struct usb_composite_dev *cdev)
 {
 	struct usb_gadget *gadget = cdev->gadget;
-	int status, gcnum;
+	int status;
 
 	if (!can_support_ecm(cdev->gadget)) {
 		dev_err(&gadget->dev, "controller '%s' not usable\n",
@@ -288,19 +275,11 @@ static int __ref multi_bind(struct usb_composite_dev *cdev)
 		}
 	}
 
-	/* set bcdDevice */
-	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0) {
-		device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
-	} else {
-		WARNING(cdev, "controller '%s' not recognized\n", gadget->name);
-		device_desc.bcdDevice = cpu_to_le16(0x0300 | 0x0099);
-	}
-
 	/* allocate string IDs */
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (unlikely(status < 0))
 		goto fail2;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 
 	/* register configurations */
 	status = rndis_config_register(cdev);
@@ -310,6 +289,7 @@ static int __ref multi_bind(struct usb_composite_dev *cdev)
 	status = cdc_config_register(cdev);
 	if (unlikely(status < 0))
 		goto fail2;
+	usb_composite_overwrite_options(cdev, &coverwrite);
 
 	/* we're done */
 	dev_info(&gadget->dev, DRIVER_DESC "\n");
@@ -338,20 +318,20 @@ static int __exit multi_unbind(struct usb_composite_dev *cdev)
 /****************************** Some noise ******************************/
 
 
-static struct usb_composite_driver multi_driver = {
+static __refdata struct usb_composite_driver multi_driver = {
 	.name		= "g_multi",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
 	.max_speed	= USB_SPEED_HIGH,
+	.bind		= multi_bind,
 	.unbind		= __exit_p(multi_unbind),
-	.iProduct	= DRIVER_DESC,
 	.needs_serial	= 1,
 };
 
 
 static int __init multi_init(void)
 {
-	return usb_composite_probe(&multi_driver, multi_bind);
+	return usb_composite_probe(&multi_driver);
 }
 module_init(multi_init);
 
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 75db2c306ce..ea45224f78c 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -51,9 +51,8 @@
 #define EPSTATUS_TIMEOUT	10000
 #define PRIME_TIMEOUT		10000
 #define READSAFE_TIMEOUT	1000
-#define DTD_TIMEOUT		1000
 
-#define LOOPS_USEC_SHIFT	4
+#define LOOPS_USEC_SHIFT	1
 #define LOOPS_USEC		(1 << LOOPS_USEC_SHIFT)
 #define LOOPS(timeout)		((timeout) >> LOOPS_USEC_SHIFT)
 
@@ -64,7 +63,6 @@ static const char driver_desc[] = DRIVER_DESC;
 
 /* controller device global variable */
 static struct mv_udc	*the_controller;
-int mv_usb_otgsc;
 
 static void nuke(struct mv_ep *ep, int status);
 static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver);
@@ -357,17 +355,24 @@ done:
 	return retval;
 }
 
-
 static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length,
 		dma_addr_t *dma, int *is_last)
 {
-	u32 temp;
 	struct mv_dtd *dtd;
 	struct mv_udc *udc;
+	struct mv_dqh *dqh;
+	u32 temp, mult = 0;
 
 	/* how big will this transfer be? */
-	*length = min(req->req.length - req->req.actual,
-			(unsigned)EP_MAX_LENGTH_TRANSFER);
+	if (usb_endpoint_xfer_isoc(req->ep->ep.desc)) {
+		dqh = req->ep->dqh;
+		mult = (dqh->max_packet_length >> EP_QUEUE_HEAD_MULT_POS)
+				& 0x3;
+		*length = min(req->req.length - req->req.actual,
+				(unsigned)(mult * req->ep->ep.maxpacket));
+	} else
+		*length = min(req->req.length - req->req.actual,
+				(unsigned)EP_MAX_LENGTH_TRANSFER);
 
 	udc = req->ep->udc;
 
@@ -375,7 +380,7 @@ static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length,
 	 * Be careful that no _GFP_HIGHMEM is set,
 	 * or we can not use dma_to_virt
 	 */
-	dtd = dma_pool_alloc(udc->dtd_pool, GFP_KERNEL, dma);
+	dtd = dma_pool_alloc(udc->dtd_pool, GFP_ATOMIC, dma);
 	if (dtd == NULL)
 		return dtd;
 
@@ -409,6 +414,8 @@ static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length,
 	if (*is_last && !req->req.no_interrupt)
 		temp |= DTD_IOC;
 
+	temp |= mult << 10;
+
 	dtd->size_ioc_sts = temp;
 
 	mb();
@@ -708,6 +715,7 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	struct mv_req *req = container_of(_req, struct mv_req, req);
 	struct mv_udc *udc = ep->udc;
 	unsigned long flags;
+	int retval;
 
 	/* catch various bogus parameters */
 	if (!_req || !req->req.complete || !req->req.buf
@@ -719,10 +727,6 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 		dev_err(&udc->dev->dev, "%s, bad ep", __func__);
 		return -EINVAL;
 	}
-	if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
-		if (req->req.length > ep->ep.maxpacket)
-			return -EMSGSIZE;
-	}
 
 	udc = ep->udc;
 	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
@@ -755,15 +759,17 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 
 	/* build dtds and push them to device queue */
 	if (!req_to_dtd(req)) {
-		int retval;
 		retval = queue_dtd(ep, req);
 		if (retval) {
 			spin_unlock_irqrestore(&udc->lock, flags);
-			return retval;
+			dev_err(&udc->dev->dev, "Failed to queue dtd\n");
+			goto err_unmap_dma;
 		}
 	} else {
 		spin_unlock_irqrestore(&udc->lock, flags);
-		return -ENOMEM;
+		dev_err(&udc->dev->dev, "Failed to dma_pool_alloc\n");
+		retval = -ENOMEM;
+		goto err_unmap_dma;
 	}
 
 	/* Update ep0 state */
@@ -775,6 +781,22 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	spin_unlock_irqrestore(&udc->lock, flags);
 
 	return 0;
+
+err_unmap_dma:
+	if (req->mapped) {
+		dma_unmap_single(ep->udc->gadget.dev.parent,
+				req->req.dma, req->req.length,
+				((ep_dir(ep) == EP_DIR_IN) ?
+				DMA_TO_DEVICE : DMA_FROM_DEVICE));
+		req->req.dma = DMA_ADDR_INVALID;
+		req->mapped = 0;
+	} else
+		dma_sync_single_for_cpu(ep->udc->gadget.dev.parent,
+				req->req.dma, req->req.length,
+				((ep_dir(ep) == EP_DIR_IN) ?
+				DMA_TO_DEVICE : DMA_FROM_DEVICE));
+
+	return retval;
 }
 
 static void mv_prime_ep(struct mv_ep *ep, struct mv_req *req)
@@ -1065,7 +1087,7 @@ static int udc_reset(struct mv_udc *udc)
 	tmp |= USBMODE_CTRL_MODE_DEVICE;
 
 	/* turn setup lockout off, require setup tripwire in usbcmd */
-	tmp |= USBMODE_SETUP_LOCK_OFF | USBMODE_STREAM_DISABLE;
+	tmp |= USBMODE_SETUP_LOCK_OFF;
 
 	writel(tmp, &udc->op_regs->usbmode);
 
@@ -1199,12 +1221,16 @@ static int mv_udc_vbus_session(struct usb_gadget *gadget, int is_active)
 			udc_start(udc);
 		}
 	} else if (udc->driver && udc->softconnect) {
+		if (!udc->active)
+			goto out;
+
 		/* stop all the transfer in queue*/
 		stop_activity(udc, udc->driver);
 		udc_stop(udc);
 		mv_udc_disable(udc);
 	}
 
+out:
 	spin_unlock_irqrestore(&udc->lock, flags);
 	return retval;
 }
@@ -1243,7 +1269,7 @@ static int mv_udc_pullup(struct usb_gadget *gadget, int is_on)
 }
 
 static int mv_udc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
 static int mv_udc_stop(struct usb_gadget_driver *driver);
 /* device controller usb_gadget_ops structure */
 static const struct usb_gadget_ops mv_ops = {
@@ -1348,7 +1374,7 @@ static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver)
 }
 
 static int mv_udc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	struct mv_udc *udc = the_controller;
 	int retval = 0;
@@ -1373,7 +1399,7 @@ static int mv_udc_start(struct usb_gadget_driver *driver,
 
 	spin_unlock_irqrestore(&udc->lock, flags);
 
-	retval = bind(&udc->gadget);
+	retval = bind(&udc->gadget, driver);
 	if (retval) {
 		dev_err(&udc->dev->dev, "bind to driver %s --> %d\n",
 				driver->driver.name, retval);
@@ -1499,15 +1525,17 @@ udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty)
 	}
 
 	/* prime the data phase */
-	if (!req_to_dtd(req))
+	if (!req_to_dtd(req)) {
 		retval = queue_dtd(ep, req);
-	else{	/* no mem */
+		if (retval) {
+			dev_err(&udc->dev->dev,
+				"Failed to queue dtd when prime status\n");
+			goto out;
+		}
+	} else{	/* no mem */
 		retval = -ENOMEM;
-		goto out;
-	}
-
-	if (retval) {
-		dev_err(&udc->dev->dev, "response error on GET_STATUS request\n");
+		dev_err(&udc->dev->dev,
+			"Failed to dma_pool_alloc when prime status\n");
 		goto out;
 	}
 
@@ -1515,6 +1543,15 @@ udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty)
 
 	return 0;
 out:
+	if (req->mapped) {
+		dma_unmap_single(ep->udc->gadget.dev.parent,
+				req->req.dma, req->req.length,
+				((ep_dir(ep) == EP_DIR_IN) ?
+				DMA_TO_DEVICE : DMA_FROM_DEVICE));
+		req->req.dma = DMA_ADDR_INVALID;
+		req->mapped = 0;
+	}
+
 	return retval;
 }
 
@@ -2468,9 +2505,11 @@ static void mv_udc_shutdown(struct platform_device *dev)
 	u32 mode;
 
 	/* reset controller mode to IDLE */
+	mv_udc_enable(udc);
 	mode = readl(&udc->op_regs->usbmode);
 	mode &= ~3;
 	writel(mode, &udc->op_regs->usbmode);
+	mv_udc_disable(udc);
 }
 
 static struct platform_driver udc_driver = {
diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c
index 89530034dff..a22ad9af056 100644
--- a/drivers/usb/gadget/ncm.c
+++ b/drivers/usb/gadget/ncm.c
@@ -20,8 +20,8 @@
 /* #define VERBOSE_DEBUG */
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
-
+#include <linux/module.h>
+#include <linux/usb/composite.h>
 
 #include "u_ether.h"
 
@@ -36,11 +36,6 @@
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-#include "composite.c"
-#include "usbstring.c"
-#include "config.c"
-#include "epautoconf.c"
-
 #include "f_ncm.c"
 #include "u_ether.c"
 
@@ -57,6 +52,7 @@
 #define CDC_PRODUCT_NUM		0xa4a1	/* Linux-USB Ethernet Gadget */
 
 /*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
 
 static struct usb_device_descriptor device_desc = {
 	.bLength =		sizeof device_desc,
@@ -97,17 +93,11 @@ static const struct usb_descriptor_header *otg_desc[] = {
 	NULL,
 };
 
-
 /* string IDs are assigned dynamically */
-
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
-
-static char manufacturer[50];
-
 static struct usb_string strings_dev[] = {
-	[STRING_MANUFACTURER_IDX].s = manufacturer,
-	[STRING_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = DRIVER_DESC,
+	[USB_GADGET_SERIAL_IDX].s = "",
 	{  } /* end of list */
 };
 
@@ -149,7 +139,6 @@ static struct usb_configuration ncm_config_driver = {
 
 static int __init gncm_bind(struct usb_composite_dev *cdev)
 {
-	int			gcnum;
 	struct usb_gadget	*gadget = cdev->gadget;
 	int			status;
 
@@ -158,48 +147,22 @@ static int __init gncm_bind(struct usb_composite_dev *cdev)
 	if (status < 0)
 		return status;
 
-	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0)
-		device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
-	else {
-		/* We assume that can_support_ecm() tells the truth;
-		 * but if the controller isn't recognized at all then
-		 * that assumption is a bit more likely to be wrong.
-		 */
-		dev_warn(&gadget->dev,
-			 "controller '%s' not recognized; trying %s\n",
-			 gadget->name,
-			 ncm_config_driver.label);
-		device_desc.bcdDevice =
-			cpu_to_le16(0x0300 | 0x0099);
-	}
-
-
 	/* Allocate string descriptor numbers ... note that string
 	 * contents can be overridden by the composite_dev glue.
 	 */
 
-	/* device descriptor strings: manufacturer, product */
-	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
-		init_utsname()->sysname, init_utsname()->release,
-		gadget->name);
-	status = usb_string_id(cdev);
-	if (status < 0)
-		goto fail;
-	strings_dev[STRING_MANUFACTURER_IDX].id = status;
-	device_desc.iManufacturer = status;
-
-	status = usb_string_id(cdev);
+	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail;
-	strings_dev[STRING_PRODUCT_IDX].id = status;
-	device_desc.iProduct = status;
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 
 	status = usb_add_config(cdev, &ncm_config_driver,
 				ncm_do_config);
 	if (status < 0)
 		goto fail;
 
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	dev_info(&gadget->dev, "%s\n", DRIVER_DESC);
 
 	return 0;
@@ -215,11 +178,12 @@ static int __exit gncm_unbind(struct usb_composite_dev *cdev)
 	return 0;
 }
 
-static struct usb_composite_driver ncm_driver = {
+static __refdata struct usb_composite_driver ncm_driver = {
 	.name		= "g_ncm",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
 	.max_speed	= USB_SPEED_HIGH,
+	.bind		= gncm_bind,
 	.unbind		= __exit_p(gncm_unbind),
 };
 
@@ -229,7 +193,7 @@ MODULE_LICENSE("GPL");
 
 static int __init init(void)
 {
-	return usb_composite_probe(&ncm_driver, gncm_bind);
+	return usb_composite_probe(&ncm_driver);
 }
 module_init(init);
 
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
index c7fb7723c01..661600abace 100644
--- a/drivers/usb/gadget/nokia.c
+++ b/drivers/usb/gadget/nokia.c
@@ -16,7 +16,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
 #include <linux/device.h>
 
 #include "u_serial.h"
@@ -38,11 +37,6 @@
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-#include "composite.c"
-#include "usbstring.c"
-#include "config.c"
-#include "epautoconf.c"
-
 #include "u_serial.c"
 #include "f_acm.c"
 #include "f_ecm.c"
@@ -52,23 +46,23 @@
 #include "u_ether.c"
 
 /*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
 
 #define NOKIA_VENDOR_ID			0x0421	/* Nokia */
 #define NOKIA_PRODUCT_ID		0x01c8	/* Nokia Gadget */
 
 /* string IDs are assigned dynamically */
 
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
-#define STRING_DESCRIPTION_IDX		2
+#define STRING_DESCRIPTION_IDX		USB_GADGET_FIRST_AVAIL_IDX
 
 static char manufacturer_nokia[] = "Nokia";
 static const char product_nokia[] = NOKIA_LONG_NAME;
 static const char description_nokia[] = "PC-Suite Configuration";
 
 static struct usb_string strings_dev[] = {
-	[STRING_MANUFACTURER_IDX].s = manufacturer_nokia,
-	[STRING_PRODUCT_IDX].s = NOKIA_LONG_NAME,
+	[USB_GADGET_MANUFACTURER_IDX].s = manufacturer_nokia,
+	[USB_GADGET_PRODUCT_IDX].s = NOKIA_LONG_NAME,
+	[USB_GADGET_SERIAL_IDX].s = "",
 	[STRING_DESCRIPTION_IDX].s = description_nokia,
 	{  } /* end of list */
 };
@@ -90,6 +84,7 @@ static struct usb_device_descriptor device_desc = {
 	.bDeviceClass		= USB_CLASS_COMM,
 	.idVendor		= __constant_cpu_to_le16(NOKIA_VENDOR_ID),
 	.idProduct		= __constant_cpu_to_le16(NOKIA_PRODUCT_ID),
+	.bcdDevice		= cpu_to_le16(NOKIA_VERSION_NUM),
 	/* .iManufacturer = DYNAMIC */
 	/* .iProduct = DYNAMIC */
 	.bNumConfigurations =	1,
@@ -151,7 +146,6 @@ static struct usb_configuration nokia_config_100ma_driver = {
 
 static int __init nokia_bind(struct usb_composite_dev *cdev)
 {
-	int			gcnum;
 	struct usb_gadget	*gadget = cdev->gadget;
 	int			status;
 
@@ -167,41 +161,17 @@ static int __init nokia_bind(struct usb_composite_dev *cdev)
 	if (status < 0)
 		goto err_ether;
 
-	status = usb_string_id(cdev);
-	if (status < 0)
-		goto err_usb;
-	strings_dev[STRING_MANUFACTURER_IDX].id = status;
-
-	device_desc.iManufacturer = status;
-
-	status = usb_string_id(cdev);
+	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto err_usb;
-	strings_dev[STRING_PRODUCT_IDX].id = status;
-
-	device_desc.iProduct = status;
-
-	/* config description */
-	status = usb_string_id(cdev);
-	if (status < 0)
-		goto err_usb;
-	strings_dev[STRING_DESCRIPTION_IDX].id = status;
-
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
+	status = strings_dev[STRING_DESCRIPTION_IDX].id;
 	nokia_config_500ma_driver.iConfiguration = status;
 	nokia_config_100ma_driver.iConfiguration = status;
 
-	/* set up other descriptors */
-	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0)
-		device_desc.bcdDevice = cpu_to_le16(NOKIA_VERSION_NUM);
-	else {
-		/* this should only work with hw that supports altsettings
-		 * and several endpoints, anything else, panic.
-		 */
-		pr_err("nokia_bind: controller '%s' not recognized\n",
-			gadget->name);
+	if (!gadget_supports_altsettings(gadget))
 		goto err_usb;
-	}
 
 	/* finally register the configuration */
 	status = usb_add_config(cdev, &nokia_config_500ma_driver,
@@ -214,6 +184,7 @@ static int __init nokia_bind(struct usb_composite_dev *cdev)
 	if (status < 0)
 		goto err_usb;
 
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	dev_info(&gadget->dev, "%s\n", NOKIA_LONG_NAME);
 
 	return 0;
@@ -237,17 +208,18 @@ static int __exit nokia_unbind(struct usb_composite_dev *cdev)
 	return 0;
 }
 
-static struct usb_composite_driver nokia_driver = {
+static __refdata struct usb_composite_driver nokia_driver = {
 	.name		= "g_nokia",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
 	.max_speed	= USB_SPEED_HIGH,
+	.bind		= nokia_bind,
 	.unbind		= __exit_p(nokia_unbind),
 };
 
 static int __init nokia_init(void)
 {
-	return usb_composite_probe(&nokia_driver, nokia_bind);
+	return usb_composite_probe(&nokia_driver);
 }
 module_init(nokia_init);
 
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index f9132ada53b..2a4749c3eb3 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -1308,7 +1308,7 @@ static int omap_pullup(struct usb_gadget *gadget, int is_on)
 }
 
 static int omap_udc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
 static int omap_udc_stop(struct usb_gadget_driver *driver);
 
 static struct usb_gadget_ops omap_gadget_ops = {
@@ -2040,7 +2040,7 @@ static inline int machine_without_vbus_sense(void)
 }
 
 static int omap_udc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	int		status = -ENODEV;
 	struct omap_ep	*ep;
@@ -2082,7 +2082,7 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
 	if (udc->dc_clk != NULL)
 		omap_udc_enable_clock(1);
 
-	status = bind(&udc->gadget);
+	status = bind(&udc->gadget, driver);
 	if (status) {
 		DBG("bind to %s --> %d\n", driver->driver.name, status);
 		udc->gadget.dev.driver = NULL;
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index f4fb71c9ae0..6490c0040e3 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -1236,7 +1236,7 @@ static int pch_udc_pcd_vbus_draw(struct usb_gadget *gadget, unsigned int mA)
 }
 
 static int pch_udc_start(struct usb_gadget_driver *driver,
-	int (*bind)(struct usb_gadget *));
+	int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
 static int pch_udc_stop(struct usb_gadget_driver *driver);
 static const struct usb_gadget_ops pch_udc_ops = {
 	.get_frame = pch_udc_pcd_get_frame,
@@ -2982,7 +2982,7 @@ static int init_dma_pools(struct pch_udc_dev *dev)
 }
 
 static int pch_udc_start(struct usb_gadget_driver *driver,
-	int (*bind)(struct usb_gadget *))
+	int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	struct pch_udc_dev	*dev = pch_udc;
 	int			retval;
@@ -3006,7 +3006,7 @@ static int pch_udc_start(struct usb_gadget_driver *driver,
 	dev->gadget.dev.driver = &driver->driver;
 
 	/* Invoke the bind routine of the gadget driver */
-	retval = bind(&dev->gadget);
+	retval = bind(&dev->gadget, driver);
 
 	if (retval) {
 		dev_err(&dev->pdev->dev, "%s: binding to %s returning %d\n",
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index f1f9290a2f4..e156e3f2672 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -22,7 +22,6 @@
 #include <linux/timer.h>
 #include <linux/list.h>
 #include <linux/interrupt.h>
-#include <linux/utsname.h>
 #include <linux/device.h>
 #include <linux/moduleparam.h>
 #include <linux/fs.h>
@@ -38,25 +37,13 @@
 #include <asm/unaligned.h>
 
 #include <linux/usb/ch9.h>
+#include <linux/usb/composite.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/g_printer.h>
 
 #include "gadget_chips.h"
 
-
-/*
- * Kbuild is not very cooperative with respect to linking separately
- * compiled library objects into one module.  So for now we won't use
- * separate compilation ... ensuring init/exit sections work to shrink
- * the runtime footprint, and giving us at least some parts of what
- * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
- */
-#include "composite.c"
-#include "usbstring.c"
-#include "config.c"
-#include "epautoconf.c"
-
-/*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
 
 #define DRIVER_DESC		"Printer Gadget"
 #define DRIVER_VERSION		"2007 OCT 06"
@@ -120,8 +107,7 @@ static struct printer_dev usb_printer_gadget;
  * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  */
 
-static char *iSerialNum;
-module_param(iSerialNum, charp, S_IRUGO);
+module_param_named(iSerialNum, coverwrite.serial_number, charp, S_IRUGO);
 MODULE_PARM_DESC(iSerialNum, "1");
 
 static char *iPNPstring;
@@ -141,18 +127,10 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR);
  * descriptors are built on demand.
  */
 
-#define STRING_MANUFACTURER		1
-#define STRING_PRODUCT			2
-#define STRING_SERIALNUM		3
-
 /* holds our biggest descriptor */
 #define USB_DESC_BUFSIZE		256
 #define USB_BUFSIZE			8192
 
-/* This device advertises one configuration. */
-#define DEV_CONFIG_VALUE		1
-#define	PRINTER_INTERFACE		0
-
 static struct usb_device_descriptor device_desc = {
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
@@ -162,16 +140,12 @@ static struct usb_device_descriptor device_desc = {
 	.bDeviceProtocol =	0,
 	.idVendor =		cpu_to_le16(PRINTER_VENDOR_NUM),
 	.idProduct =		cpu_to_le16(PRINTER_PRODUCT_NUM),
-	.iManufacturer =	STRING_MANUFACTURER,
-	.iProduct =		STRING_PRODUCT,
-	.iSerialNumber =	STRING_SERIALNUM,
 	.bNumConfigurations =	1
 };
 
 static struct usb_interface_descriptor intf_desc = {
 	.bLength =		sizeof intf_desc,
 	.bDescriptorType =	USB_DT_INTERFACE,
-	.bInterfaceNumber =	PRINTER_INTERFACE,
 	.bNumEndpoints =	2,
 	.bInterfaceClass =	USB_CLASS_PRINTER,
 	.bInterfaceSubClass =	1,	/* Printer Sub-Class */
@@ -252,7 +226,6 @@ static const struct usb_descriptor_header *otg_desc[] = {
 
 /* descriptors that are built on-demand */
 
-static char				manufacturer [50];
 static char				product_desc [40] = DRIVER_DESC;
 static char				serial_num [40] = "1";
 static char				pnp_string [1024] =
@@ -260,9 +233,9 @@ static char				pnp_string [1024] =
 
 /* static strings, in UTF-8 */
 static struct usb_string		strings [] = {
-	{ STRING_MANUFACTURER,	manufacturer, },
-	{ STRING_PRODUCT,	product_desc, },
-	{ STRING_SERIALNUM,	serial_num, },
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = product_desc,
+	[USB_GADGET_SERIAL_IDX].s =	serial_num,
 	{  }		/* end of list */
 };
 
@@ -871,25 +844,13 @@ static int set_interface(struct printer_dev *dev, unsigned number)
 	int			result = 0;
 
 	/* Free the current interface */
-	switch (dev->interface) {
-	case PRINTER_INTERFACE:
-		printer_reset_interface(dev);
-		break;
-	}
+	printer_reset_interface(dev);
 
-	switch (number) {
-	case PRINTER_INTERFACE:
-		result = set_printer_interface(dev);
-		if (result) {
-			printer_reset_interface(dev);
-		} else {
-			dev->interface = PRINTER_INTERFACE;
-		}
-		break;
-	default:
-		result = -EINVAL;
-		/* FALL THROUGH */
-	}
+	result = set_printer_interface(dev);
+	if (result)
+		printer_reset_interface(dev);
+	else
+		dev->interface = number;
 
 	if (!result)
 		INFO(dev, "Using interface %x\n", number);
@@ -972,7 +933,7 @@ static int printer_func_setup(struct usb_function *f,
 		switch (ctrl->bRequest) {
 		case 0: /* Get the IEEE-1284 PNP String */
 			/* Only one printer interface is supported. */
-			if ((wIndex>>8) != PRINTER_INTERFACE)
+			if ((wIndex>>8) != dev->interface)
 				break;
 
 			value = (pnp_string[0]<<8)|pnp_string[1];
@@ -983,7 +944,7 @@ static int printer_func_setup(struct usb_function *f,
 
 		case 1: /* Get Port Status */
 			/* Only one printer interface is supported. */
-			if (wIndex != PRINTER_INTERFACE)
+			if (wIndex != dev->interface)
 				break;
 
 			*(u8 *)req->buf = dev->printer_status;
@@ -992,7 +953,7 @@ static int printer_func_setup(struct usb_function *f,
 
 		case 2: /* Soft Reset */
 			/* Only one printer interface is supported. */
-			if (wIndex != PRINTER_INTERFACE)
+			if (wIndex != dev->interface)
 				break;
 
 			printer_soft_reset(dev);
@@ -1020,6 +981,37 @@ unknown:
 static int __init printer_func_bind(struct usb_configuration *c,
 		struct usb_function *f)
 {
+	struct printer_dev *dev = container_of(f, struct printer_dev, function);
+	struct usb_composite_dev *cdev = c->cdev;
+	struct usb_ep		*in_ep, *out_ep;
+	int id;
+
+	id = usb_interface_id(c, f);
+	if (id < 0)
+		return id;
+	intf_desc.bInterfaceNumber = id;
+
+	/* all we really need is bulk IN/OUT */
+	in_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_in_desc);
+	if (!in_ep) {
+autoconf_fail:
+		dev_err(&cdev->gadget->dev, "can't autoconfigure on %s\n",
+			cdev->gadget->name);
+		return -ENODEV;
+	}
+	in_ep->driver_data = in_ep;	/* claim */
+
+	out_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_out_desc);
+	if (!out_ep)
+		goto autoconf_fail;
+	out_ep->driver_data = out_ep;	/* claim */
+
+	/* assumes that all endpoints are dual-speed */
+	hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
+	hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
+
+	dev->in_ep = in_ep;
+	dev->out_ep = out_ep;
 	return 0;
 }
 
@@ -1035,7 +1027,8 @@ static int printer_func_set_alt(struct usb_function *f,
 	int ret = -ENOTSUPP;
 
 	if (!alt)
-		ret = set_interface(dev, PRINTER_INTERFACE);
+		ret = set_interface(dev, intf);
+
 	return ret;
 }
 
@@ -1107,13 +1100,13 @@ static int __init printer_bind_config(struct usb_configuration *c)
 {
 	struct usb_gadget	*gadget = c->cdev->gadget;
 	struct printer_dev	*dev;
-	struct usb_ep		*in_ep, *out_ep;
 	int			status = -ENOMEM;
-	int			gcnum;
 	size_t			len;
 	u32			i;
 	struct usb_request	*req;
 
+	usb_ep_autoconfig_reset(gadget);
+
 	dev = &usb_printer_gadget;
 
 	dev->function.name = shortname;
@@ -1125,6 +1118,10 @@ static int __init printer_bind_config(struct usb_configuration *c)
 	dev->function.set_alt = printer_func_set_alt;
 	dev->function.disable = printer_func_disable;
 
+	status = usb_add_function(c, &dev->function);
+	if (status)
+		return status;
+
 	/* Setup the sysfs files for the printer gadget. */
 	dev->pdev = device_create(usb_gadget_class, NULL, g_printer_devno,
 				  NULL, "g_printer");
@@ -1145,23 +1142,6 @@ static int __init printer_bind_config(struct usb_configuration *c)
 		goto fail;
 	}
 
-	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0) {
-		device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
-	} else {
-		dev_warn(&gadget->dev, "controller '%s' not recognized\n",
-			gadget->name);
-		/* unrecognized, but safe unless bulk is REALLY quirky */
-		device_desc.bcdDevice =
-			cpu_to_le16(0xFFFF);
-	}
-	snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s",
-		init_utsname()->sysname, init_utsname()->release,
-		gadget->name);
-
-	if (iSerialNum)
-		strlcpy(serial_num, iSerialNum, sizeof serial_num);
-
 	if (iPNPstring)
 		strlcpy(&pnp_string[2], iPNPstring, (sizeof pnp_string)-2);
 
@@ -1169,26 +1149,6 @@ static int __init printer_bind_config(struct usb_configuration *c)
 	pnp_string[0] = (len >> 8) & 0xFF;
 	pnp_string[1] = len & 0xFF;
 
-	/* all we really need is bulk IN/OUT */
-	usb_ep_autoconfig_reset(gadget);
-	in_ep = usb_ep_autoconfig(gadget, &fs_ep_in_desc);
-	if (!in_ep) {
-autoconf_fail:
-		dev_err(&gadget->dev, "can't autoconfigure on %s\n",
-			gadget->name);
-		return -ENODEV;
-	}
-	in_ep->driver_data = in_ep;	/* claim */
-
-	out_ep = usb_ep_autoconfig(gadget, &fs_ep_out_desc);
-	if (!out_ep)
-		goto autoconf_fail;
-	out_ep->driver_data = out_ep;	/* claim */
-
-	/* assumes that all endpoints are dual-speed */
-	hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
-	hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
-
 	usb_gadget_set_selfpowered(gadget);
 
 	if (gadget->is_otg) {
@@ -1215,9 +1175,6 @@ autoconf_fail:
 	dev->current_rx_bytes = 0;
 	dev->current_rx_buf = NULL;
 
-	dev->in_ep = in_ep;
-	dev->out_ep = out_ep;
-
 	for (i = 0; i < QLEN; i++) {
 		req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL);
 		if (!req) {
@@ -1250,8 +1207,6 @@ autoconf_fail:
 	dev->gadget = gadget;
 
 	INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
-	INFO(dev, "using %s, OUT %s IN %s\n", gadget->name, out_ep->name,
-			in_ep->name);
 	return 0;
 
 fail:
@@ -1266,14 +1221,28 @@ static int printer_unbind(struct usb_composite_dev *cdev)
 
 static int __init printer_bind(struct usb_composite_dev *cdev)
 {
-	return usb_add_config(cdev, &printer_cfg_driver, printer_bind_config);
+	int ret;
+
+	ret = usb_string_ids_tab(cdev, strings);
+	if (ret < 0)
+		return ret;
+	device_desc.iManufacturer = strings[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings[USB_GADGET_PRODUCT_IDX].id;
+	device_desc.iSerialNumber = strings[USB_GADGET_SERIAL_IDX].id;
+
+	ret = usb_add_config(cdev, &printer_cfg_driver, printer_bind_config);
+	if (ret)
+		return ret;
+	usb_composite_overwrite_options(cdev, &coverwrite);
+	return ret;
 }
 
-static struct usb_composite_driver printer_driver = {
+static __refdata struct usb_composite_driver printer_driver = {
 	.name           = shortname,
 	.dev            = &device_desc,
 	.strings        = dev_strings,
 	.max_speed      = USB_SPEED_HIGH,
+	.bind		= printer_bind,
 	.unbind		= printer_unbind,
 };
 
@@ -1297,7 +1266,7 @@ init(void)
 		return status;
 	}
 
-	status = usb_composite_probe(&printer_driver, printer_bind);
+	status = usb_composite_probe(&printer_driver);
 	if (status) {
 		class_destroy(usb_gadget_class);
 		unregister_chrdev_region(g_printer_devno, 1);
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 907ad3ecb34..8efbf08c356 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -33,7 +33,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/irq.h>
 #include <linux/clk.h>
-#include <linux/err.h>
 #include <linux/seq_file.h>
 #include <linux/debugfs.h>
 #include <linux/io.h>
@@ -1000,7 +999,7 @@ static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
 }
 
 static int pxa25x_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
 static int pxa25x_stop(struct usb_gadget_driver *driver);
 
 static const struct usb_gadget_ops pxa25x_udc_ops = {
@@ -1258,7 +1257,7 @@ static void udc_enable (struct pxa25x_udc *dev)
  * the driver might get unbound.
  */
 static int pxa25x_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	struct pxa25x_udc	*dev = the_controller;
 	int			retval;
@@ -1286,7 +1285,7 @@ fail:
 		dev->gadget.dev.driver = NULL;
 		return retval;
 	}
-	retval = bind(&dev->gadget);
+	retval = bind(&dev->gadget, driver);
 	if (retval) {
 		DMSG("bind to driver %s --> error %d\n",
 				driver->driver.name, retval);
diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h
index 861f4df6ea2..2eca1e71fec 100644
--- a/drivers/usb/gadget/pxa25x_udc.h
+++ b/drivers/usb/gadget/pxa25x_udc.h
@@ -225,7 +225,7 @@ dump_state(struct pxa25x_udc *dev)
 		dev->stats.read.bytes, dev->stats.read.ops);
 
 	for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) {
-		if (dev->ep [i].desc == NULL)
+		if (dev->ep[i].ep.desc == NULL)
 			continue;
 		DMSG ("udccs%d = %02x\n", i, *dev->ep->reg_udccs);
 	}
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 644b4305cb9..979ddaddb0f 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -1672,7 +1672,7 @@ static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
 }
 
 static int pxa27x_udc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
 static int pxa27x_udc_stop(struct usb_gadget_driver *driver);
 
 static const struct usb_gadget_ops pxa_udc_ops = {
@@ -1803,7 +1803,7 @@ static void udc_enable(struct pxa_udc *udc)
  * Returns 0 if no error, -EINVAL, -ENODEV, -EBUSY otherwise
  */
 static int pxa27x_udc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	struct pxa_udc *udc = the_controller;
 	int retval;
@@ -1826,7 +1826,7 @@ static int pxa27x_udc_start(struct usb_gadget_driver *driver,
 		dev_err(udc->dev, "device_add error %d\n", retval);
 		goto add_fail;
 	}
-	retval = bind(&udc->gadget);
+	retval = bind(&udc->gadget, driver);
 	if (retval) {
 		dev_err(udc->dev, "bind to driver %s --> error %d\n",
 			driver->driver.name, retval);
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index b35babed6fc..e4192b887de 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -863,26 +863,8 @@ int rndis_msg_parser(u8 configNr, u8 *buf)
 		 */
 		pr_warning("%s: unknown RNDIS message 0x%08X len %d\n",
 			__func__, MsgType, MsgLength);
-		{
-			unsigned i;
-			for (i = 0; i < MsgLength; i += 16) {
-				pr_debug("%03d: "
-					" %02x %02x %02x %02x"
-					" %02x %02x %02x %02x"
-					" %02x %02x %02x %02x"
-					" %02x %02x %02x %02x"
-					"\n",
-					i,
-					buf[i], buf [i+1],
-						buf[i+2], buf[i+3],
-					buf[i+4], buf [i+5],
-						buf[i+6], buf[i+7],
-					buf[i+8], buf [i+9],
-						buf[i+10], buf[i+11],
-					buf[i+12], buf [i+13],
-						buf[i+14], buf[i+15]);
-			}
-		}
+		print_hex_dump_bytes(__func__, DUMP_PREFIX_OFFSET,
+				     buf, MsgLength);
 		break;
 	}
 
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 0bb617e1dda..6f696ee8b81 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2197,7 +2197,7 @@ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg)
 	/* issue soft reset */
 	writel(GRSTCTL_CSftRst, hsotg->regs + GRSTCTL);
 
-	timeout = 1000;
+	timeout = 10000;
 	do {
 		grstctl = readl(hsotg->regs + GRSTCTL);
 	} while ((grstctl & GRSTCTL_CSftRst) && timeout-- > 0);
@@ -2207,7 +2207,7 @@ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg)
 		return -EINVAL;
 	}
 
-	timeout = 1000;
+	timeout = 10000;
 
 	while (1) {
 		u32 grstctl = readl(hsotg->regs + GRSTCTL);
@@ -3516,7 +3516,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 	hsotg->dev = dev;
 	hsotg->plat = plat;
 
-	hsotg->clk = clk_get(&pdev->dev, "otg");
+	hsotg->clk = devm_clk_get(&pdev->dev, "otg");
 	if (IS_ERR(hsotg->clk)) {
 		dev_err(dev, "cannot get otg clock\n");
 		return PTR_ERR(hsotg->clk);
@@ -3667,7 +3667,6 @@ err_supplies:
 
 err_clk:
 	clk_disable_unprepare(hsotg->clk);
-	clk_put(hsotg->clk);
 
 	return ret;
 }
@@ -3693,7 +3692,6 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev)
 	regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
 
 	clk_disable_unprepare(hsotg->clk);
-	clk_put(hsotg->clk);
 
 	device_unregister(&hsotg->gadget.dev);
 	return 0;
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index e26a4e7ed2b..d8e785d4ad5 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -135,7 +135,6 @@ struct s3c_hsudc_req {
  * @dev: The device reference used by probe function.
  * @lock: Lock to synchronize the usage of Endpoints (EP's are indexed).
  * @regs: Remapped base address of controller's register space.
- * @mem_rsrc: Device memory resource used for remapping device register space.
  * irq: IRQ number used by the controller.
  * uclk: Reference to the controller clock.
  * ep0state: Current state of EP0.
@@ -150,7 +149,6 @@ struct s3c_hsudc {
 	struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsudc_supply_names)];
 	spinlock_t lock;
 	void __iomem *regs;
-	struct resource *mem_rsrc;
 	int irq;
 	struct clk *uclk;
 	int ep0state;
@@ -835,9 +833,9 @@ static struct usb_request *s3c_hsudc_alloc_request(struct usb_ep *_ep,
 {
 	struct s3c_hsudc_req *hsreq;
 
-	hsreq = kzalloc(sizeof *hsreq, gfp_flags);
+	hsreq = kzalloc(sizeof(*hsreq), gfp_flags);
 	if (!hsreq)
-		return 0;
+		return NULL;
 
 	INIT_LIST_HEAD(&hsreq->queue);
 	return &hsreq->req;
@@ -906,16 +904,16 @@ static int s3c_hsudc_queue(struct usb_ep *_ep, struct usb_request *_req,
 			csr = readl((u32)hsudc->regs + offset);
 			if (!(csr & S3C_ESR_TX_SUCCESS) &&
 				(s3c_hsudc_write_fifo(hsep, hsreq) == 1))
-				hsreq = 0;
+				hsreq = NULL;
 		} else {
 			csr = readl((u32)hsudc->regs + offset);
 			if ((csr & S3C_ESR_RX_SUCCESS)
 				   && (s3c_hsudc_read_fifo(hsep, hsreq) == 1))
-				hsreq = 0;
+				hsreq = NULL;
 		}
 	}
 
-	if (hsreq != 0)
+	if (hsreq)
 		list_add_tail(&hsreq->queue, &hsep->queue);
 
 	spin_unlock_irqrestore(&hsudc->lock, flags);
@@ -1271,7 +1269,7 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
 	struct s3c24xx_hsudc_platdata *pd = pdev->dev.platform_data;
 	int ret, i;
 
-	hsudc = kzalloc(sizeof(struct s3c_hsudc) +
+	hsudc = devm_kzalloc(&pdev->dev, sizeof(struct s3c_hsudc) +
 			sizeof(struct s3c_hsudc_ep) * pd->epnum,
 			GFP_KERNEL);
 	if (!hsudc) {
@@ -1296,25 +1294,12 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(dev, "unable to obtain driver resource data\n");
-		ret = -ENODEV;
-		goto err_res;
-	}
-
-	hsudc->mem_rsrc = request_mem_region(res->start, resource_size(res),
-				dev_name(&pdev->dev));
-	if (!hsudc->mem_rsrc) {
-		dev_err(dev, "failed to reserve register area\n");
-		ret = -ENODEV;
-		goto err_res;
-	}
 
-	hsudc->regs = ioremap(res->start, resource_size(res));
+	hsudc->regs = devm_request_and_ioremap(&pdev->dev, res);
 	if (!hsudc->regs) {
 		dev_err(dev, "error mapping device register area\n");
 		ret = -EBUSY;
-		goto err_remap;
+		goto err_res;
 	}
 
 	spin_lock_init(&hsudc->lock);
@@ -1337,21 +1322,22 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
 	ret = platform_get_irq(pdev, 0);
 	if (ret < 0) {
 		dev_err(dev, "unable to obtain IRQ number\n");
-		goto err_irq;
+		goto err_res;
 	}
 	hsudc->irq = ret;
 
-	ret = request_irq(hsudc->irq, s3c_hsudc_irq, 0, driver_name, hsudc);
+	ret = devm_request_irq(&pdev->dev, hsudc->irq, s3c_hsudc_irq, 0,
+				driver_name, hsudc);
 	if (ret < 0) {
 		dev_err(dev, "irq request failed\n");
-		goto err_irq;
+		goto err_res;
 	}
 
-	hsudc->uclk = clk_get(&pdev->dev, "usb-device");
+	hsudc->uclk = devm_clk_get(&pdev->dev, "usb-device");
 	if (IS_ERR(hsudc->uclk)) {
 		dev_err(dev, "failed to find usb-device clock source\n");
 		ret = PTR_ERR(hsudc->uclk);
-		goto err_clk;
+		goto err_res;
 	}
 	clk_enable(hsudc->uclk);
 
@@ -1377,21 +1363,12 @@ err_add_udc:
 	device_unregister(&hsudc->gadget.dev);
 err_add_device:
 	clk_disable(hsudc->uclk);
-	clk_put(hsudc->uclk);
-err_clk:
-	free_irq(hsudc->irq, hsudc);
-err_irq:
-	iounmap(hsudc->regs);
-
-err_remap:
-	release_mem_region(res->start, resource_size(res));
 err_res:
 	if (!IS_ERR_OR_NULL(hsudc->transceiver))
 		usb_put_phy(hsudc->transceiver);
 
 	regulator_bulk_free(ARRAY_SIZE(hsudc->supplies), hsudc->supplies);
 err_supplies:
-	kfree(hsudc);
 	return ret;
 }
 
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index f2e51f50e52..c33e942d119 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -12,6 +12,8 @@
  * (at your option) any later version.
  */
 
+#define pr_fmt(fmt) "s3c2410_udc: " fmt
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
@@ -27,6 +29,7 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/prefetch.h>
+#include <linux/io.h>
 
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
@@ -35,7 +38,6 @@
 #include <linux/usb/gadget.h>
 
 #include <asm/byteorder.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/unaligned.h>
 #include <mach/irqs.h>
@@ -115,7 +117,7 @@ static int dprintk(int level, const char *fmt, ...)
 			sizeof(printk_buf)-len, fmt, args);
 	va_end(args);
 
-	return printk(KERN_DEBUG "%s", printk_buf);
+	return pr_debug("%s", printk_buf);
 }
 #else
 static int dprintk(int level, const char *fmt, ...)
@@ -125,10 +127,10 @@ static int dprintk(int level, const char *fmt, ...)
 #endif
 static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p)
 {
-	u32 addr_reg,pwr_reg,ep_int_reg,usb_int_reg;
+	u32 addr_reg, pwr_reg, ep_int_reg, usb_int_reg;
 	u32 ep_int_en_reg, usb_int_en_reg, ep0_csr;
-	u32 ep1_i_csr1,ep1_i_csr2,ep1_o_csr1,ep1_o_csr2;
-	u32 ep2_i_csr1,ep2_i_csr2,ep2_o_csr1,ep2_o_csr2;
+	u32 ep1_i_csr1, ep1_i_csr2, ep1_o_csr1, ep1_o_csr2;
+	u32 ep2_i_csr1, ep2_i_csr2, ep2_o_csr1, ep2_o_csr2;
 
 	addr_reg       = udc_read(S3C2410_UDC_FUNC_ADDR_REG);
 	pwr_reg        = udc_read(S3C2410_UDC_PWR_REG);
@@ -164,10 +166,10 @@ static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p)
 		 "EP2_I_CSR2     : 0x%04X\n"
 		 "EP2_O_CSR1     : 0x%04X\n"
 		 "EP2_O_CSR2     : 0x%04X\n",
-			addr_reg,pwr_reg,ep_int_reg,usb_int_reg,
+			addr_reg, pwr_reg, ep_int_reg, usb_int_reg,
 			ep_int_en_reg, usb_int_en_reg, ep0_csr,
-			ep1_i_csr1,ep1_i_csr2,ep1_o_csr1,ep1_o_csr2,
-			ep2_i_csr1,ep2_i_csr2,ep2_o_csr1,ep2_o_csr2
+			ep1_i_csr1, ep1_i_csr2, ep1_o_csr1, ep1_o_csr2,
+			ep2_i_csr1, ep2_i_csr2, ep2_o_csr1, ep2_o_csr2
 		);
 
 	return 0;
@@ -230,7 +232,7 @@ static inline void s3c2410_udc_set_ep0_de_out(void __iomem *base)
 {
 	udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG);
 
-	udc_writeb(base,(S3C2410_UDC_EP0_CSR_SOPKTRDY
+	udc_writeb(base, (S3C2410_UDC_EP0_CSR_SOPKTRDY
 				| S3C2410_UDC_EP0_CSR_DE),
 			S3C2410_UDC_EP0_CSR_REG);
 }
@@ -263,7 +265,7 @@ static void s3c2410_udc_done(struct s3c2410_ep *ep,
 
 	list_del_init(&req->queue);
 
-	if (likely (req->req.status == -EINPROGRESS))
+	if (likely(req->req.status == -EINPROGRESS))
 		req->req.status = status;
 	else
 		status = req->req.status;
@@ -280,9 +282,9 @@ static void s3c2410_udc_nuke(struct s3c2410_udc *udc,
 	if (&ep->queue == NULL)
 		return;
 
-	while (!list_empty (&ep->queue)) {
+	while (!list_empty(&ep->queue)) {
 		struct s3c2410_request *req;
-		req = list_entry (ep->queue.next, struct s3c2410_request,
+		req = list_entry(ep->queue.next, struct s3c2410_request,
 				queue);
 		s3c2410_udc_done(ep, req, status);
 	}
@@ -389,10 +391,10 @@ static int s3c2410_udc_write_fifo(struct s3c2410_ep *ep,
 
 		if (idx == 0) {
 			/* Reset signal => no need to say 'data sent' */
-			if (! (udc_read(S3C2410_UDC_USB_INT_REG)
+			if (!(udc_read(S3C2410_UDC_USB_INT_REG)
 					& S3C2410_UDC_USBINT_RESET))
 				s3c2410_udc_set_ep0_de_in(base_addr);
-			ep->dev->ep0state=EP0_IDLE;
+			ep->dev->ep0state = EP0_IDLE;
 		} else {
 			udc_write(idx, S3C2410_UDC_INDEX_REG);
 			ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG);
@@ -406,7 +408,7 @@ static int s3c2410_udc_write_fifo(struct s3c2410_ep *ep,
 	} else {
 		if (idx == 0) {
 			/* Reset signal => no need to say 'data sent' */
-			if (! (udc_read(S3C2410_UDC_USB_INT_REG)
+			if (!(udc_read(S3C2410_UDC_USB_INT_REG)
 					& S3C2410_UDC_USBINT_RESET))
 				s3c2410_udc_set_ep0_ipr(base_addr);
 		} else {
@@ -442,7 +444,7 @@ static int s3c2410_udc_read_fifo(struct s3c2410_ep *ep,
 	u8		*buf;
 	u32		ep_csr;
 	unsigned	bufferspace;
-	int		is_last=1;
+	int		is_last = 1;
 	unsigned	avail;
 	int		fifo_count = 0;
 	u32		idx;
@@ -510,7 +512,7 @@ static int s3c2410_udc_read_fifo(struct s3c2410_ep *ep,
 	/* Only ep0 debug messages are interesting */
 	if (idx == 0)
 		dprintk(DEBUG_VERBOSE, "%s fifo count : %d [last %d]\n",
-			__func__, fifo_count,is_last);
+			__func__, fifo_count, is_last);
 
 	if (is_last) {
 		if (idx == 0) {
@@ -542,7 +544,7 @@ static int s3c2410_udc_read_fifo(struct s3c2410_ep *ep,
 
 static int s3c2410_udc_read_fifo_crq(struct usb_ctrlrequest *crq)
 {
-	unsigned char *outbuf = (unsigned char*)crq;
+	unsigned char *outbuf = (unsigned char *)crq;
 	int bytes_read = 0;
 
 	udc_write(0, S3C2410_UDC_INDEX_REG);
@@ -648,7 +650,7 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev,
 
 	switch (crq->bRequest) {
 	case USB_REQ_SET_CONFIGURATION:
-		dprintk(DEBUG_NORMAL, "USB_REQ_SET_CONFIGURATION ... \n");
+		dprintk(DEBUG_NORMAL, "USB_REQ_SET_CONFIGURATION ...\n");
 
 		if (crq->bRequestType == USB_RECIP_DEVICE) {
 			dev->req_config = 1;
@@ -657,7 +659,7 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev,
 		break;
 
 	case USB_REQ_SET_INTERFACE:
-		dprintk(DEBUG_NORMAL, "USB_REQ_SET_INTERFACE ... \n");
+		dprintk(DEBUG_NORMAL, "USB_REQ_SET_INTERFACE ...\n");
 
 		if (crq->bRequestType == USB_RECIP_INTERFACE) {
 			dev->req_config = 1;
@@ -666,7 +668,7 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev,
 		break;
 
 	case USB_REQ_SET_ADDRESS:
-		dprintk(DEBUG_NORMAL, "USB_REQ_SET_ADDRESS ... \n");
+		dprintk(DEBUG_NORMAL, "USB_REQ_SET_ADDRESS ...\n");
 
 		if (crq->bRequestType == USB_RECIP_DEVICE) {
 			tmp = crq->wValue & 0x7F;
@@ -679,13 +681,12 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev,
 		break;
 
 	case USB_REQ_GET_STATUS:
-		dprintk(DEBUG_NORMAL, "USB_REQ_GET_STATUS ... \n");
+		dprintk(DEBUG_NORMAL, "USB_REQ_GET_STATUS ...\n");
 		s3c2410_udc_clear_ep0_opr(base_addr);
 
 		if (dev->req_std) {
-			if (!s3c2410_udc_get_status(dev, crq)) {
+			if (!s3c2410_udc_get_status(dev, crq))
 				return;
-			}
 		}
 		break;
 
@@ -750,7 +751,7 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev,
 		/* deferred i/o == no response yet */
 	} else if (dev->req_pending) {
 		dprintk(DEBUG_VERBOSE, "dev->req_pending... what now?\n");
-		dev->req_pending=0;
+		dev->req_pending = 0;
 	}
 
 	dprintk(DEBUG_VERBOSE, "ep0state %s\n", ep0states[dev->ep0state]);
@@ -801,16 +802,14 @@ static void s3c2410_udc_handle_ep0(struct s3c2410_udc *dev)
 
 	case EP0_IN_DATA_PHASE:			/* GET_DESCRIPTOR etc */
 		dprintk(DEBUG_NORMAL, "EP0_IN_DATA_PHASE ... what now?\n");
-		if (!(ep0csr & S3C2410_UDC_EP0_CSR_IPKRDY) && req) {
+		if (!(ep0csr & S3C2410_UDC_EP0_CSR_IPKRDY) && req)
 			s3c2410_udc_write_fifo(ep, req);
-		}
 		break;
 
 	case EP0_OUT_DATA_PHASE:		/* SET_DESCRIPTOR etc */
 		dprintk(DEBUG_NORMAL, "EP0_OUT_DATA_PHASE ... what now?\n");
-		if ((ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY) && req ) {
-			s3c2410_udc_read_fifo(ep,req);
-		}
+		if ((ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY) && req)
+			s3c2410_udc_read_fifo(ep, req);
 		break;
 
 	case EP0_END_XFER:
@@ -836,7 +835,7 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep)
 	u32			ep_csr1;
 	u32			idx;
 
-	if (likely (!list_empty(&ep->queue)))
+	if (likely(!list_empty(&ep->queue)))
 		req = list_entry(ep->queue.next,
 				struct s3c2410_request, queue);
 	else
@@ -858,9 +857,8 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep)
 			return;
 		}
 
-		if (!(ep_csr1 & S3C2410_UDC_ICSR1_PKTRDY) && req) {
-			s3c2410_udc_write_fifo(ep,req);
-		}
+		if (!(ep_csr1 & S3C2410_UDC_ICSR1_PKTRDY) && req)
+			s3c2410_udc_write_fifo(ep, req);
 	} else {
 		udc_write(idx, S3C2410_UDC_INDEX_REG);
 		ep_csr1 = udc_read(S3C2410_UDC_OUT_CSR1_REG);
@@ -873,9 +871,8 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep)
 			return;
 		}
 
-		if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) {
-			s3c2410_udc_read_fifo(ep,req);
-		}
+		if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req)
+			s3c2410_udc_read_fifo(ep, req);
 	}
 }
 
@@ -1057,7 +1054,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep,
 	struct s3c2410_ep	*ep;
 	u32			max, tmp;
 	unsigned long		flags;
-	u32			csr1,csr2;
+	u32			csr1, csr2;
 	u32			int_en_reg;
 
 	ep = to_s3c2410_ep(_ep);
@@ -1073,7 +1070,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep,
 
 	max = usb_endpoint_maxp(desc) & 0x1fff;
 
-	local_irq_save (flags);
+	local_irq_save(flags);
 	_ep->maxpacket = max & 0x7ff;
 	ep->ep.desc = desc;
 	ep->halted = 0;
@@ -1117,11 +1114,11 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep,
 
 	/* print some debug message */
 	tmp = desc->bEndpointAddress;
-	dprintk (DEBUG_NORMAL, "enable %s(%d) ep%x%s-blk max %02x\n",
-		 _ep->name,ep->num, tmp,
+	dprintk(DEBUG_NORMAL, "enable %s(%d) ep%x%s-blk max %02x\n",
+		 _ep->name, ep->num, tmp,
 		 desc->bEndpointAddress & USB_DIR_IN ? "in" : "out", max);
 
-	local_irq_restore (flags);
+	local_irq_restore(flags);
 	s3c2410_udc_set_halt(_ep, 0);
 
 	return 0;
@@ -1149,7 +1146,7 @@ static int s3c2410_udc_ep_disable(struct usb_ep *_ep)
 	ep->ep.desc = NULL;
 	ep->halted = 1;
 
-	s3c2410_udc_nuke (ep->dev, ep, -ESHUTDOWN);
+	s3c2410_udc_nuke(ep->dev, ep, -ESHUTDOWN);
 
 	/* disable irqs */
 	int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG);
@@ -1170,16 +1167,16 @@ s3c2410_udc_alloc_request(struct usb_ep *_ep, gfp_t mem_flags)
 {
 	struct s3c2410_request *req;
 
-	dprintk(DEBUG_VERBOSE,"%s(%p,%d)\n", __func__, _ep, mem_flags);
+	dprintk(DEBUG_VERBOSE, "%s(%p,%d)\n", __func__, _ep, mem_flags);
 
 	if (!_ep)
 		return NULL;
 
-	req = kzalloc (sizeof(struct s3c2410_request), mem_flags);
+	req = kzalloc(sizeof(struct s3c2410_request), mem_flags);
 	if (!req)
 		return NULL;
 
-	INIT_LIST_HEAD (&req->queue);
+	INIT_LIST_HEAD(&req->queue);
 	return &req->req;
 }
 
@@ -1197,7 +1194,7 @@ s3c2410_udc_free_request(struct usb_ep *_ep, struct usb_request *_req)
 	if (!ep || !_req || (!ep->ep.desc && _ep->name != ep0name))
 		return;
 
-	WARN_ON (!list_empty (&req->queue));
+	WARN_ON(!list_empty(&req->queue));
 	kfree(req);
 }
 
@@ -1220,12 +1217,12 @@ static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req,
 	}
 
 	dev = ep->dev;
-	if (unlikely (!dev->driver
+	if (unlikely(!dev->driver
 			|| dev->gadget.speed == USB_SPEED_UNKNOWN)) {
 		return -ESHUTDOWN;
 	}
 
-	local_irq_save (flags);
+	local_irq_save(flags);
 
 	if (unlikely(!_req || !_req->complete
 			|| !_req->buf || !list_empty(&req->queue))) {
@@ -1233,7 +1230,7 @@ static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req,
 			dprintk(DEBUG_NORMAL, "%s: 1 X X X\n", __func__);
 		else {
 			dprintk(DEBUG_NORMAL, "%s: 0 %01d %01d %01d\n",
-				__func__, !_req->complete,!_req->buf,
+				__func__, !_req->complete, !_req->buf,
 				!list_empty(&req->queue));
 		}
 
@@ -1299,7 +1296,7 @@ static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req,
 	}
 
 	/* pio or dma irq handler advances the queue. */
-	if (likely (req != 0))
+	if (likely(req))
 		list_add_tail(&req->queue, &ep->queue);
 
 	local_irq_restore(flags);
@@ -1329,11 +1326,11 @@ static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 
 	udc = to_s3c2410_udc(ep->gadget);
 
-	local_irq_save (flags);
+	local_irq_save(flags);
 
-	list_for_each_entry (req, &ep->queue, queue) {
+	list_for_each_entry(req, &ep->queue, queue) {
 		if (&req->req == _req) {
-			list_del_init (&req->queue);
+			list_del_init(&req->queue);
 			_req->status = -ECONNRESET;
 			retval = 0;
 			break;
@@ -1348,7 +1345,7 @@ static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 		s3c2410_udc_done(ep, req, -ECONNRESET);
 	}
 
-	local_irq_restore (flags);
+	local_irq_restore(flags);
 	return retval;
 }
 
@@ -1367,7 +1364,7 @@ static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value)
 		return -EINVAL;
 	}
 
-	local_irq_save (flags);
+	local_irq_save(flags);
 
 	idx = ep->bEndpointAddress & 0x7F;
 
@@ -1376,7 +1373,7 @@ static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value)
 		s3c2410_udc_set_ep0_de_out(base_addr);
 	} else {
 		udc_write(idx, S3C2410_UDC_INDEX_REG);
-		ep_csr = udc_read((ep->bEndpointAddress &USB_DIR_IN)
+		ep_csr = udc_read((ep->bEndpointAddress & USB_DIR_IN)
 				? S3C2410_UDC_IN_CSR1_REG
 				: S3C2410_UDC_OUT_CSR1_REG);
 
@@ -1404,7 +1401,7 @@ static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value)
 	}
 
 	ep->halted = value ? 1 : 0;
-	local_irq_restore (flags);
+	local_irq_restore(flags);
 
 	return 0;
 }
@@ -1484,9 +1481,9 @@ static int s3c2410_udc_set_pullup(struct s3c2410_udc *udc, int is_on)
 			}
 			s3c2410_udc_disable(udc);
 		}
-	}
-	else
+	} else {
 		return -EOPNOTSUPP;
+	}
 
 	return 0;
 }
@@ -1542,7 +1539,7 @@ static int s3c2410_vbus_draw(struct usb_gadget *_gadget, unsigned ma)
 }
 
 static int s3c2410_udc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
 static int s3c2410_udc_stop(struct usb_gadget_driver *driver);
 
 static const struct usb_gadget_ops s3c2410_ops = {
@@ -1617,20 +1614,20 @@ static void s3c2410_udc_reinit(struct s3c2410_udc *dev)
 	u32 i;
 
 	/* device/ep0 records init */
-	INIT_LIST_HEAD (&dev->gadget.ep_list);
-	INIT_LIST_HEAD (&dev->gadget.ep0->ep_list);
+	INIT_LIST_HEAD(&dev->gadget.ep_list);
+	INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
 	dev->ep0state = EP0_IDLE;
 
 	for (i = 0; i < S3C2410_ENDPOINTS; i++) {
 		struct s3c2410_ep *ep = &dev->ep[i];
 
 		if (i != 0)
-			list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list);
+			list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
 
 		ep->dev = dev;
 		ep->ep.desc = NULL;
 		ep->halted = 0;
-		INIT_LIST_HEAD (&ep->queue);
+		INIT_LIST_HEAD(&ep->queue);
 	}
 }
 
@@ -1668,7 +1665,7 @@ static void s3c2410_udc_enable(struct s3c2410_udc *dev)
 }
 
 static int s3c2410_udc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	struct s3c2410_udc *udc = the_controller;
 	int		retval;
@@ -1683,13 +1680,13 @@ static int s3c2410_udc_start(struct usb_gadget_driver *driver,
 		return -EBUSY;
 
 	if (!bind || !driver->setup || driver->max_speed < USB_SPEED_FULL) {
-		printk(KERN_ERR "Invalid driver: bind %p setup %p speed %d\n",
+		dev_err(&udc->gadget.dev, "Invalid driver: bind %p setup %p speed %d\n",
 			bind, driver->setup, driver->max_speed);
 		return -EINVAL;
 	}
 #if defined(MODULE)
 	if (!driver->unbind) {
-		printk(KERN_ERR "Invalid driver: no unbind method\n");
+		dev_err(&udc->gadget.dev, "Invalid driver: no unbind method\n");
 		return -EINVAL;
 	}
 #endif
@@ -1699,15 +1696,17 @@ static int s3c2410_udc_start(struct usb_gadget_driver *driver,
 	udc->gadget.dev.driver = &driver->driver;
 
 	/* Bind the driver */
-	if ((retval = device_add(&udc->gadget.dev)) != 0) {
-		printk(KERN_ERR "Error in device_add() : %d\n",retval);
+	retval = device_add(&udc->gadget.dev);
+	if (retval) {
+		dev_err(&udc->gadget.dev, "Error in device_add() : %d\n", retval);
 		goto register_error;
 	}
 
 	dprintk(DEBUG_NORMAL, "binding gadget driver '%s'\n",
 		driver->driver.name);
 
-	if ((retval = bind(&udc->gadget)) != 0) {
+	retval = bind(&udc->gadget, driver);
+	if (retval) {
 		device_del(&udc->gadget.dev);
 		goto register_error;
 	}
@@ -1865,7 +1864,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
 		memory.ep[4].fifo_size = S3C2440_EP_FIFO_SIZE;
 	}
 
-	spin_lock_init (&udc->lock);
+	spin_lock_init(&udc->lock);
 	udc_info = pdev->dev.platform_data;
 
 	rsrc_start = S3C2410_PA_USBDEV;
@@ -2028,7 +2027,8 @@ static int s3c2410_udc_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM
-static int s3c2410_udc_suspend(struct platform_device *pdev, pm_message_t message)
+static int
+s3c2410_udc_suspend(struct platform_device *pdev, pm_message_t message)
 {
 	s3c2410_udc_command(S3C2410_UDC_P_DISABLE);
 
@@ -2073,7 +2073,7 @@ static int __init udc_init(void)
 
 	s3c2410_udc_debugfs_root = debugfs_create_dir(gadget_name, NULL);
 	if (IS_ERR(s3c2410_udc_debugfs_root)) {
-		printk(KERN_ERR "%s: debugfs dir creation failed %ld\n",
+		pr_err("%s: debugfs dir creation failed %ld\n",
 			gadget_name, PTR_ERR(s3c2410_udc_debugfs_root));
 		s3c2410_udc_debugfs_root = NULL;
 	}
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 665c07422c2..44752f531e8 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -11,7 +11,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/utsname.h>
 #include <linux/device.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
@@ -37,17 +36,13 @@
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-#include "composite.c"
-#include "usbstring.c"
-#include "config.c"
-#include "epautoconf.c"
-
 #include "f_acm.c"
 #include "f_obex.c"
 #include "f_serial.c"
 #include "u_serial.c"
 
 /*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
 
 /* Thanks to NetChip Technologies for donating this product ID.
 *
@@ -61,15 +56,12 @@
 
 /* string IDs are assigned dynamically */
 
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
-#define STRING_DESCRIPTION_IDX		2
-
-static char manufacturer[50];
+#define STRING_DESCRIPTION_IDX		USB_GADGET_FIRST_AVAIL_IDX
 
 static struct usb_string strings_dev[] = {
-	[STRING_MANUFACTURER_IDX].s = manufacturer,
-	[STRING_PRODUCT_IDX].s = GS_VERSION_NAME,
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = GS_VERSION_NAME,
+	[USB_GADGET_SERIAL_IDX].s = "",
 	[STRING_DESCRIPTION_IDX].s = NULL /* updated; f(use_acm) */,
 	{  } /* end of list */
 };
@@ -94,7 +86,7 @@ static struct usb_device_descriptor device_desc = {
 	/* .bMaxPacketSize0 = f(hardware) */
 	.idVendor =		cpu_to_le16(GS_VENDOR_ID),
 	/* .idProduct =	f(use_acm) */
-	/* .bcdDevice = f(hardware) */
+	.bcdDevice = cpu_to_le16(GS_VERSION_NUM),
 	/* .iManufacturer = DYNAMIC */
 	/* .iProduct = DYNAMIC */
 	.bNumConfigurations =	1,
@@ -162,8 +154,6 @@ static struct usb_configuration serial_config_driver = {
 
 static int __init gs_bind(struct usb_composite_dev *cdev)
 {
-	int			gcnum;
-	struct usb_gadget	*gadget = cdev->gadget;
 	int			status;
 
 	status = gserial_setup(cdev->gadget, n_ports);
@@ -174,50 +164,14 @@ static int __init gs_bind(struct usb_composite_dev *cdev)
 	 * contents can be overridden by the composite_dev glue.
 	 */
 
-	/* device description: manufacturer, product */
-	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
-		init_utsname()->sysname, init_utsname()->release,
-		gadget->name);
-	status = usb_string_id(cdev);
+	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail;
-	strings_dev[STRING_MANUFACTURER_IDX].id = status;
-
-	device_desc.iManufacturer = status;
-
-	status = usb_string_id(cdev);
-	if (status < 0)
-		goto fail;
-	strings_dev[STRING_PRODUCT_IDX].id = status;
-
-	device_desc.iProduct = status;
-
-	/* config description */
-	status = usb_string_id(cdev);
-	if (status < 0)
-		goto fail;
-	strings_dev[STRING_DESCRIPTION_IDX].id = status;
-
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
+	status = strings_dev[STRING_DESCRIPTION_IDX].id;
 	serial_config_driver.iConfiguration = status;
 
-	/* set up other descriptors */
-	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0)
-		device_desc.bcdDevice = cpu_to_le16(GS_VERSION_NUM | gcnum);
-	else {
-		/* this is so simple (for now, no altsettings) that it
-		 * SHOULD NOT have problems with bulk-capable hardware.
-		 * so warn about unrcognized controllers -- don't panic.
-		 *
-		 * things like configuration and altsetting numbering
-		 * can need hardware-specific attention though.
-		 */
-		pr_warning("gs_bind: controller '%s' not recognized\n",
-			gadget->name);
-		device_desc.bcdDevice =
-			cpu_to_le16(GS_VERSION_NUM | 0x0099);
-	}
-
 	if (gadget_is_otg(cdev->gadget)) {
 		serial_config_driver.descriptors = otg_desc;
 		serial_config_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
@@ -229,6 +183,7 @@ static int __init gs_bind(struct usb_composite_dev *cdev)
 	if (status < 0)
 		goto fail;
 
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	INFO(cdev, "%s\n", GS_VERSION_NAME);
 
 	return 0;
@@ -238,11 +193,12 @@ fail:
 	return status;
 }
 
-static struct usb_composite_driver gserial_driver = {
+static __refdata struct usb_composite_driver gserial_driver = {
 	.name		= "g_serial",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
 	.max_speed	= USB_SPEED_SUPER,
+	.bind		= gs_bind,
 };
 
 static int __init init(void)
@@ -271,7 +227,7 @@ static int __init init(void)
 	}
 	strings_dev[STRING_DESCRIPTION_IDX].s = serial_config_driver.label;
 
-	return usb_composite_probe(&gserial_driver, gs_bind);
+	return usb_composite_probe(&gserial_driver);
 }
 module_init(init);
 
diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c
index 5444866e13e..eaa1005377f 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/tcm_usb_gadget.c
@@ -25,13 +25,10 @@
 #include <target/configfs_macros.h>
 #include <asm/unaligned.h>
 
-#include "usbstring.c"
-#include "epautoconf.c"
-#include "config.c"
-#include "composite.c"
-
 #include "tcm_usb_gadget.h"
 
+USB_GADGET_COMPOSITE_OPTIONS();
+
 static struct target_fabric_configfs *usbg_fabric_configfs;
 
 static inline struct f_uas *to_f_uas(struct usb_function *f)
@@ -1977,7 +1974,6 @@ static struct usb_interface_descriptor bot_intf_desc = {
 	.bInterfaceClass =      USB_CLASS_MASS_STORAGE,
 	.bInterfaceSubClass =   USB_SC_SCSI,
 	.bInterfaceProtocol =   USB_PR_BULK,
-	.iInterface =           USB_G_STR_INT_UAS,
 };
 
 static struct usb_interface_descriptor uasp_intf_desc = {
@@ -1988,7 +1984,6 @@ static struct usb_interface_descriptor uasp_intf_desc = {
 	.bInterfaceClass =	USB_CLASS_MASS_STORAGE,
 	.bInterfaceSubClass =	USB_SC_SCSI,
 	.bInterfaceProtocol =	USB_PR_UAS,
-	.iInterface =		USB_G_STR_INT_BBB,
 };
 
 static struct usb_endpoint_descriptor uasp_bi_desc = {
@@ -2209,20 +2204,16 @@ static struct usb_device_descriptor usbg_device_desc = {
 	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
 	.idVendor =		cpu_to_le16(UAS_VENDOR_ID),
 	.idProduct =		cpu_to_le16(UAS_PRODUCT_ID),
-	.iManufacturer =	USB_G_STR_MANUFACTOR,
-	.iProduct =		USB_G_STR_PRODUCT,
-	.iSerialNumber =	USB_G_STR_SERIAL,
-
 	.bNumConfigurations =   1,
 };
 
 static struct usb_string	usbg_us_strings[] = {
-	{ USB_G_STR_MANUFACTOR,	"Target Manufactor"},
-	{ USB_G_STR_PRODUCT,	"Target Product"},
-	{ USB_G_STR_SERIAL,	"000000000001"},
-	{ USB_G_STR_CONFIG,	"default config"},
-	{ USB_G_STR_INT_UAS,	"USB Attached SCSI"},
-	{ USB_G_STR_INT_BBB,	"Bulk Only Transport"},
+	[USB_GADGET_MANUFACTURER_IDX].s	= "Target Manufactor",
+	[USB_GADGET_PRODUCT_IDX].s	= "Target Product",
+	[USB_GADGET_SERIAL_IDX].s	= "000000000001",
+	[USB_G_STR_CONFIG].s		= "default config",
+	[USB_G_STR_INT_UAS].s		= "USB Attached SCSI",
+	[USB_G_STR_INT_BBB].s		= "Bulk Only Transport",
 	{ },
 };
 
@@ -2244,7 +2235,6 @@ static int guas_unbind(struct usb_composite_dev *cdev)
 static struct usb_configuration usbg_config_driver = {
 	.label                  = "Linux Target",
 	.bConfigurationValue    = 1,
-	.iConfiguration		= USB_G_STR_CONFIG,
 	.bmAttributes           = USB_CONFIG_ATT_SELFPOWER,
 };
 
@@ -2417,6 +2407,9 @@ static int usbg_cfg_bind(struct usb_configuration *c)
 	fu->function.disable = usbg_disable;
 	fu->tpg = the_only_tpg_I_currently_have;
 
+	bot_intf_desc.iInterface = usbg_us_strings[USB_G_STR_INT_BBB].id;
+	uasp_intf_desc.iInterface = usbg_us_strings[USB_G_STR_INT_UAS].id;
+
 	ret = usb_add_function(c, &fu->function);
 	if (ret)
 		goto err;
@@ -2431,22 +2424,38 @@ static int usb_target_bind(struct usb_composite_dev *cdev)
 {
 	int ret;
 
+	ret = usb_string_ids_tab(cdev, usbg_us_strings);
+	if (ret)
+		return ret;
+
+	usbg_device_desc.iManufacturer =
+		usbg_us_strings[USB_GADGET_MANUFACTURER_IDX].id;
+	usbg_device_desc.iProduct = usbg_us_strings[USB_GADGET_PRODUCT_IDX].id;
+	usbg_device_desc.iSerialNumber =
+		usbg_us_strings[USB_GADGET_SERIAL_IDX].id;
+	usbg_config_driver.iConfiguration =
+		usbg_us_strings[USB_G_STR_CONFIG].id;
+
 	ret = usb_add_config(cdev, &usbg_config_driver,
 			usbg_cfg_bind);
+	if (ret)
+		return ret;
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	return 0;
 }
 
-static struct usb_composite_driver usbg_driver = {
+static __refdata struct usb_composite_driver usbg_driver = {
 	.name           = "g_target",
 	.dev            = &usbg_device_desc,
 	.strings        = usbg_strings,
 	.max_speed      = USB_SPEED_SUPER,
+	.bind		= usb_target_bind,
 	.unbind         = guas_unbind,
 };
 
 static int usbg_attach(struct usbg_tpg *tpg)
 {
-	return usb_composite_probe(&usbg_driver, usb_target_bind);
+	return usb_composite_probe(&usbg_driver);
 }
 
 static void usbg_detach(struct usbg_tpg *tpg)
diff --git a/drivers/usb/gadget/tcm_usb_gadget.h b/drivers/usb/gadget/tcm_usb_gadget.h
index bb18999a9a8..8289219925b 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.h
+++ b/drivers/usb/gadget/tcm_usb_gadget.h
@@ -16,12 +16,11 @@
 #define UASP_SS_EP_COMP_LOG_STREAMS 4
 #define UASP_SS_EP_COMP_NUM_STREAMS (1 << UASP_SS_EP_COMP_LOG_STREAMS)
 
-#define USB_G_STR_MANUFACTOR    1
-#define USB_G_STR_PRODUCT       2
-#define USB_G_STR_SERIAL        3
-#define USB_G_STR_CONFIG        4
-#define USB_G_STR_INT_UAS       5
-#define USB_G_STR_INT_BBB       6
+enum {
+	USB_G_STR_CONFIG = USB_GADGET_FIRST_AVAIL_IDX,
+	USB_G_STR_INT_UAS,
+	USB_G_STR_INT_BBB,
+};
 
 #define USB_G_ALT_INT_BBB       0
 #define USB_G_ALT_INT_UAS       1
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 0e523092615..b9c46900c2c 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -14,6 +14,7 @@
 /* #define VERBOSE_DEBUG */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/gfp.h>
 #include <linux/device.h>
 #include <linux/ctype.h>
@@ -83,17 +84,10 @@ struct eth_dev {
 
 #define DEFAULT_QLEN	2	/* double buffering by default */
 
-
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-
 static unsigned qmult = 5;
 module_param(qmult, uint, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(qmult, "queue length multiplier at high/super speed");
 
-#else	/* full speed (low speed doesn't do bulk) */
-#define qmult		1
-#endif
-
 /* for dual-speed hardware, use deeper queues at high/super speed */
 static inline int qlen(struct usb_gadget *gadget)
 {
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index e5e44f8cde9..f3cd9690b10 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -118,7 +118,7 @@ EXPORT_SYMBOL_GPL(usb_gadget_unmap_request);
  */
 static inline int usb_gadget_start(struct usb_gadget *gadget,
 		struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+		int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
 {
 	return gadget->ops->start(driver, bind);
 }
@@ -262,8 +262,8 @@ static void usb_gadget_remove_driver(struct usb_udc *udc)
 	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
 
 	if (udc_is_newstyle(udc)) {
-		udc->driver->disconnect(udc->gadget);
 		usb_gadget_disconnect(udc->gadget);
+		udc->driver->disconnect(udc->gadget);
 		udc->driver->unbind(udc->gadget);
 		usb_gadget_udc_stop(udc->gadget, udc->driver);
 	} else {
@@ -311,13 +311,12 @@ EXPORT_SYMBOL_GPL(usb_del_gadget_udc);
 
 /* ------------------------------------------------------------------------- */
 
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
 {
 	struct usb_udc		*udc = NULL;
 	int			ret;
 
-	if (!driver || !bind || !driver->setup)
+	if (!driver || !driver->bind || !driver->setup)
 		return -EINVAL;
 
 	mutex_lock(&udc_lock);
@@ -339,7 +338,7 @@ found:
 	udc->dev.driver = &driver->driver;
 
 	if (udc_is_newstyle(udc)) {
-		ret = bind(udc->gadget);
+		ret = driver->bind(udc->gadget, driver);
 		if (ret)
 			goto err1;
 		ret = usb_gadget_udc_start(udc->gadget, driver);
@@ -350,7 +349,7 @@ found:
 		usb_gadget_connect(udc->gadget);
 	} else {
 
-		ret = usb_gadget_start(udc->gadget, driver, bind);
+		ret = usb_gadget_start(udc->gadget, driver, driver->bind);
 		if (ret)
 			goto err1;
 
diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c
index 4d25b9009ed..1f49fce0f0b 100644
--- a/drivers/usb/gadget/usbstring.c
+++ b/drivers/usb/gadget/usbstring.c
@@ -9,6 +9,7 @@
 
 #include <linux/errno.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/list.h>
 #include <linux/string.h>
 #include <linux/device.h>
@@ -68,4 +69,4 @@ usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf)
 	buf [1] = USB_DT_STRING;
 	return buf [0];
 }
-
+EXPORT_SYMBOL_GPL(usb_gadget_get_string);
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
index 120e134e805..69cf5c2cd33 100644
--- a/drivers/usb/gadget/webcam.c
+++ b/drivers/usb/gadget/webcam.c
@@ -23,16 +23,12 @@
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-#include "composite.c"
-#include "usbstring.c"
-#include "config.c"
-#include "epautoconf.c"
-
 #include "uvc_queue.c"
 #include "uvc_video.c"
 #include "uvc_v4l2.c"
 #include "f_uvc.c"
 
+USB_GADGET_COMPOSITE_OPTIONS();
 /* --------------------------------------------------------------------------
  * Device descriptor
  */
@@ -47,13 +43,12 @@ static char webcam_config_label[] = "Video";
 
 /* string IDs are assigned dynamically */
 
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
-#define STRING_DESCRIPTION_IDX		2
+#define STRING_DESCRIPTION_IDX		USB_GADGET_FIRST_AVAIL_IDX
 
 static struct usb_string webcam_strings[] = {
-	[STRING_MANUFACTURER_IDX].s = webcam_vendor_label,
-	[STRING_PRODUCT_IDX].s = webcam_product_label,
+	[USB_GADGET_MANUFACTURER_IDX].s = webcam_vendor_label,
+	[USB_GADGET_PRODUCT_IDX].s = webcam_product_label,
+	[USB_GADGET_SERIAL_IDX].s = "",
 	[STRING_DESCRIPTION_IDX].s = webcam_config_label,
 	{  }
 };
@@ -358,26 +353,22 @@ webcam_bind(struct usb_composite_dev *cdev)
 	/* Allocate string descriptor numbers ... note that string contents
 	 * can be overridden by the composite_dev glue.
 	 */
-	if ((ret = usb_string_id(cdev)) < 0)
-		goto error;
-	webcam_strings[STRING_MANUFACTURER_IDX].id = ret;
-	webcam_device_descriptor.iManufacturer = ret;
-
-	if ((ret = usb_string_id(cdev)) < 0)
-		goto error;
-	webcam_strings[STRING_PRODUCT_IDX].id = ret;
-	webcam_device_descriptor.iProduct = ret;
-
-	if ((ret = usb_string_id(cdev)) < 0)
+	ret = usb_string_ids_tab(cdev, webcam_strings);
+	if (ret < 0)
 		goto error;
-	webcam_strings[STRING_DESCRIPTION_IDX].id = ret;
-	webcam_config_driver.iConfiguration = ret;
+	webcam_device_descriptor.iManufacturer =
+		webcam_strings[USB_GADGET_MANUFACTURER_IDX].id;
+	webcam_device_descriptor.iProduct =
+		webcam_strings[USB_GADGET_PRODUCT_IDX].id;
+	webcam_config_driver.iConfiguration =
+		webcam_strings[STRING_DESCRIPTION_IDX].id;
 
 	/* Register our configuration. */
 	if ((ret = usb_add_config(cdev, &webcam_config_driver,
 					webcam_config_bind)) < 0)
 		goto error;
 
+	usb_composite_overwrite_options(cdev, &coverwrite);
 	INFO(cdev, "Webcam Video Gadget\n");
 	return 0;
 
@@ -390,18 +381,19 @@ error:
  * Driver
  */
 
-static struct usb_composite_driver webcam_driver = {
+static __refdata struct usb_composite_driver webcam_driver = {
 	.name		= "g_webcam",
 	.dev		= &webcam_device_descriptor,
 	.strings	= webcam_device_strings,
 	.max_speed	= USB_SPEED_SUPER,
+	.bind		= webcam_bind,
 	.unbind		= webcam_unbind,
 };
 
 static int __init
 webcam_init(void)
 {
-	return usb_composite_probe(&webcam_driver, webcam_bind);
+	return usb_composite_probe(&webcam_driver);
 }
 
 static void __exit
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 12ad516ada7..6bf4c061136 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -42,7 +42,6 @@
 
 #include <linux/kernel.h>
 #include <linux/slab.h>
-#include <linux/utsname.h>
 #include <linux/device.h>
 
 #include "g_zero.h"
@@ -58,15 +57,11 @@
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
-#include "composite.c"
-#include "usbstring.c"
-#include "config.c"
-#include "epautoconf.c"
-
 #include "f_sourcesink.c"
 #include "f_loopback.c"
 
 /*-------------------------------------------------------------------------*/
+USB_GADGET_COMPOSITE_OPTIONS();
 
 #define DRIVER_VERSION		"Cinco de Mayo 2008"
 
@@ -141,20 +136,13 @@ const struct usb_descriptor_header *otg_desc[] = {
 #endif
 
 /* string IDs are assigned dynamically */
-
-#define STRING_MANUFACTURER_IDX		0
-#define STRING_PRODUCT_IDX		1
-#define STRING_SERIAL_IDX		2
-
-static char manufacturer[50];
-
 /* default serial number takes at least two packets */
 static char serial[] = "0123456789.0123456789.0123456789";
 
 static struct usb_string strings_dev[] = {
-	[STRING_MANUFACTURER_IDX].s = manufacturer,
-	[STRING_PRODUCT_IDX].s = longname,
-	[STRING_SERIAL_IDX].s = serial,
+	[USB_GADGET_MANUFACTURER_IDX].s = "",
+	[USB_GADGET_PRODUCT_IDX].s = longname,
+	[USB_GADGET_SERIAL_IDX].s = serial,
 	{  }			/* end of list */
 };
 
@@ -265,30 +253,18 @@ static void zero_resume(struct usb_composite_dev *cdev)
 
 static int __init zero_bind(struct usb_composite_dev *cdev)
 {
-	int			gcnum;
-	struct usb_gadget	*gadget = cdev->gadget;
-	int			id;
+	int			status;
 
 	/* Allocate string descriptor numbers ... note that string
 	 * contents can be overridden by the composite_dev glue.
 	 */
-	id = usb_string_id(cdev);
-	if (id < 0)
-		return id;
-	strings_dev[STRING_MANUFACTURER_IDX].id = id;
-	device_desc.iManufacturer = id;
-
-	id = usb_string_id(cdev);
-	if (id < 0)
-		return id;
-	strings_dev[STRING_PRODUCT_IDX].id = id;
-	device_desc.iProduct = id;
-
-	id = usb_string_id(cdev);
-	if (id < 0)
-		return id;
-	strings_dev[STRING_SERIAL_IDX].id = id;
-	device_desc.iSerialNumber = id;
+	status = usb_string_ids_tab(cdev, strings_dev);
+	if (status < 0)
+		return status;
+
+	device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
+	device_desc.iSerialNumber = strings_dev[USB_GADGET_SERIAL_IDX].id;
 
 	setup_timer(&autoresume_timer, zero_autoresume, (unsigned long) cdev);
 
@@ -303,28 +279,10 @@ static int __init zero_bind(struct usb_composite_dev *cdev)
 		loopback_add(cdev, autoresume != 0);
 	}
 
-	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0)
-		device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
-	else {
-		/* gadget zero is so simple (for now, no altsettings) that
-		 * it SHOULD NOT have problems with bulk-capable hardware.
-		 * so just warn about unrcognized controllers -- don't panic.
-		 *
-		 * things like configuration and altsetting numbering
-		 * can need hardware-specific attention though.
-		 */
-		pr_warning("%s: controller '%s' not recognized\n",
-			longname, gadget->name);
-		device_desc.bcdDevice = cpu_to_le16(0x9999);
-	}
+	usb_composite_overwrite_options(cdev, &coverwrite);
 
 	INFO(cdev, "%s, version: " DRIVER_VERSION "\n", longname);
 
-	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
-		init_utsname()->sysname, init_utsname()->release,
-		gadget->name);
-
 	return 0;
 }
 
@@ -334,11 +292,12 @@ static int zero_unbind(struct usb_composite_dev *cdev)
 	return 0;
 }
 
-static struct usb_composite_driver zero_driver = {
+static __refdata struct usb_composite_driver zero_driver = {
 	.name		= "zero",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
 	.max_speed	= USB_SPEED_SUPER,
+	.bind		= zero_bind,
 	.unbind		= zero_unbind,
 	.suspend	= zero_suspend,
 	.resume		= zero_resume,
@@ -349,7 +308,7 @@ MODULE_LICENSE("GPL");
 
 static int __init init(void)
 {
-	return usb_composite_probe(&zero_driver, zero_bind);
+	return usb_composite_probe(&zero_driver);
 }
 module_init(init);