diff options
| author | Sebastian Andrzej Siewior <bigeasy@linutronix.de> | 2011-06-23 14:26:11 +0200 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@suse.de> | 2011-07-01 14:31:12 -0700 |
| commit | 765f5b830e547229bb752e7b232ee83e2b3d49d5 (patch) | |
| tree | ffa37920a165fd3a964b7e0f333f6509d3e59de3 /drivers/usb/gadget/printer.c | |
| parent | 193ab2a6070039e7ee2b9b9bebea754a7c52fd1b (diff) | |
usb: gadget: defer setting maxpacket till ->setup()
maxpacket is set by the udc driver for ep0 very early. This value is
copied by the function gadget used later for the USB_DT_DEVICE and
USB_DT_DEVICE_QUALIFIER query. This seems to work fine so far. For USB3
we need set a different value here. In SS speed it is 2^x with x=9 and
in HS we set something <= 64. If the UDC starts in SS and continues in
HS after the cable has been plugged it will report a too small value.
There setting of this value is defered and taken automaticly from the
ep0 pointer where the UDC driver can update it according to the speed it
detected _after_ a cable has been plugged.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb/gadget/printer.c')
| -rw-r--r-- | drivers/usb/gadget/printer.c | 14 |
1 files changed, 9 insertions, 5 deletions
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index 00e5f19c75b..d5df8dd9d58 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -1148,6 +1148,8 @@ printer_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) switch (wValue >> 8) { case USB_DT_DEVICE: + device_desc.bMaxPacketSize0 = + gadget->ep0->maxpacket; value = min(wLength, (u16) sizeof device_desc); memcpy(req->buf, &device_desc, value); break; @@ -1155,6 +1157,12 @@ printer_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) case USB_DT_DEVICE_QUALIFIER: if (!gadget->is_dualspeed) break; + /* + * assumes ep0 uses the same value for both + * speeds + */ + dev_qualifier.bMaxPacketSize0 = + gadget->ep0->maxpacket; value = min(wLength, (u16) sizeof dev_qualifier); memcpy(req->buf, &dev_qualifier, value); @@ -1450,15 +1458,11 @@ autoconf_fail: out_ep->driver_data = out_ep; /* claim */ #ifdef CONFIG_USB_GADGET_DUALSPEED - /* assumes ep0 uses the same value for both speeds ... */ - dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0; - - /* and that all endpoints are dual-speed */ + /* assumes that all endpoints are dual-speed */ hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress; hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress; #endif /* DUALSPEED */ - device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; usb_gadget_set_selfpowered(gadget); if (gadget->is_otg) { |