diff options
| author | Felipe Balbi <balbi@ti.com> | 2012-01-02 13:35:41 +0200 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@suse.de> | 2012-01-04 15:52:42 -0800 |
| commit | 18b7ede5f7ee2092aedcb578d3ac30bd5d4fc23c (patch) | |
| tree | a49fe4ec2a86b37c8bed5041b8314c118b1ebead /drivers/usb/dwc3 | |
| parent | e28dbb0661ca49ada2d6a307a1ec93dd75d515e0 (diff) | |
usb: ch9: fix up MaxStreams helper
According to USB 3.0 Specification Table 9-22, if
bmAttributes [4:0] are set to zero, it means "no
streams supported", but the way this helper was
defined on Linux, we will *always* have one stream
which might cause several problems.
For example on DWC3, we would tell the controller
endpoint has streams enabled and yet start transfers
with Stream ID set to 0, which would goof up the host
side.
While doing that, convert the macro to an inline
function due to the different checks we now need.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb/dwc3')
| -rw-r--r-- | drivers/usb/dwc3/gadget.c | 3 |
1 files changed, 1 insertions, 2 deletions
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 4c6bedad51f..a696bde5322 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -297,8 +297,7 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep, params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN | DWC3_DEPCFG_XFER_NOT_READY_EN; - if (comp_desc && USB_SS_MAX_STREAMS(comp_desc->bmAttributes) - && usb_endpoint_xfer_bulk(desc)) { + if (usb_ss_max_streams(comp_desc) && usb_endpoint_xfer_bulk(desc)) { params.param1 |= DWC3_DEPCFG_STREAM_CAPABLE | DWC3_DEPCFG_STREAM_EVENT_EN; dep->stream_capable = true; |