Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

Conflicts:
	drivers/net/wimax/i2400m/usb-notif.c

1 files changed, 22 insertions, 12 deletions

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index cd50d86029e..be86ae3f408 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -392,7 +392,7 @@ static void hub_irq(struct urb *urb)
 {
 	struct usb_hub *hub = urb->context;
 	int status = urb->status;
-	int i;
+	unsigned i;
 	unsigned long bits;
 
 	switch (status) {
@@ -1305,6 +1305,7 @@ void usb_set_device_state(struct usb_device *udev,
 		recursively_mark_NOTATTACHED(udev);
 	spin_unlock_irqrestore(&device_state_lock, flags);
 }
+EXPORT_SYMBOL_GPL(usb_set_device_state);
 
 /*
  * WUSB devices are simple: they have no hubs behind, so the mapping
@@ -2471,20 +2472,20 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	 */
 	switch (udev->speed) {
 	case USB_SPEED_VARIABLE:	/* fixed at 512 */
-		udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(512);
+		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512);
 		break;
 	case USB_SPEED_HIGH:		/* fixed at 64 */
-		udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
+		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
 		break;
 	case USB_SPEED_FULL:		/* 8, 16, 32, or 64 */
 		/* to determine the ep0 maxpacket size, try to read
 		 * the device descriptor to get bMaxPacketSize0 and
 		 * then correct our initial guess.
 		 */
-		udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
+		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
 		break;
 	case USB_SPEED_LOW:		/* fixed at 8 */
-		udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(8);
+		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(8);
 		break;
 	default:
 		goto fail;
@@ -3392,10 +3393,10 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 		udev->descriptor = descriptor;	/* for disconnect() calls */
 		goto re_enumerate;
   	}
-  
+
+	/* Restore the device's previous configuration */
 	if (!udev->actconfig)
 		goto done;
-
 	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 			USB_REQ_SET_CONFIGURATION, 0,
 			udev->actconfig->desc.bConfigurationValue, 0,
@@ -3408,16 +3409,25 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
   	}
 	usb_set_device_state(udev, USB_STATE_CONFIGURED);
 
+	/* Put interfaces back into the same altsettings as before.
+	 * Don't bother to send the Set-Interface request for interfaces
+	 * that were already in altsetting 0; besides being unnecessary,
+	 * many devices can't handle it.  Instead just reset the host-side
+	 * endpoint state.
+	 */
 	for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
 		struct usb_interface *intf = udev->actconfig->interface[i];
 		struct usb_interface_descriptor *desc;
 
-		/* set_interface resets host side toggle even
-		 * for altsetting zero.  the interface may have no driver.
-		 */
 		desc = &intf->cur_altsetting->desc;
-		ret = usb_set_interface(udev, desc->bInterfaceNumber,
-			desc->bAlternateSetting);
+		if (desc->bAlternateSetting == 0) {
+			usb_disable_interface(udev, intf, true);
+			usb_enable_interface(udev, intf, true);
+			ret = 0;
+		} else {
+			ret = usb_set_interface(udev, desc->bInterfaceNumber,
+					desc->bAlternateSetting);
+		}
 		if (ret < 0) {
 			dev_err(&udev->dev, "failed to restore interface %d "
 				"altsetting %d (error=%d)\n",