Merge tag 'tty-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY/Serial merge from Greg Kroah-Hartman:
 "Here's the big tty/serial tree set of changes for 3.8-rc1.

  Contained in here is a bunch more reworks of the tty port layer from
  Jiri and bugfixes from Alan, along with a number of other tty and
  serial driver updates by the various driver authors.

  Also, Jiri has been coerced^Wconvinced to be the co-maintainer of the
  TTY layer, which is much appreciated by me.

  All of these have been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed up some trivial conflicts in the staging tree, due to the fwserial
driver having come in both ways (but fixed up a bit in the serial tree),
and the ioctl handling in the dgrp driver having been done slightly
differently (staging tree got that one right, and removed both
TIOCGSOFTCAR and TIOCSSOFTCAR).

* tag 'tty-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (146 commits)
  staging: sb105x: fix potential NULL pointer dereference in mp_chars_in_buffer()
  staging/fwserial: Remove superfluous free
  staging/fwserial: Use WARN_ONCE when port table is corrupted
  staging/fwserial: Destruct embedded tty_port on teardown
  staging/fwserial: Fix build breakage when !CONFIG_BUG
  staging: fwserial: Add TTY-over-Firewire serial driver
  drivers/tty/serial/serial_core.c: clean up HIGH_BITS_OFFSET usage
  staging: dgrp: dgrp_tty.c: Audit the return values of get/put_user()
  staging: dgrp: dgrp_tty.c: Remove the TIOCSSOFTCAR ioctl handler from dgrp driver
  serial: ifx6x60: Add modem power off function in the platform reboot process
  serial: mxs-auart: unmap the scatter list before we copy the data
  serial: mxs-auart: disable the Receive Timeout Interrupt when DMA is enabled
  serial: max310x: Setup missing "can_sleep" field for GPIO
  tty/serial: fix ifx6x60.c declaration warning
  serial: samsung: add devicetree properties for non-Exynos SoCs
  serial: samsung: fix potential soft lockup during uart write
  tty: vt: Remove redundant null check before kfree.
  tty/8250 Add check for pci_ioremap_bar failure
  tty/8250 Add support for Commtech's Fastcom Async-335 and Fastcom Async-PCIe cards
  tty/8250 Add XR17D15x devices to the exar_handle_irq override
  ...

100 files changed, 3606 insertions, 1523 deletions

diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 42d0a2581a8..9d7d00cdfec 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1771,6 +1771,7 @@ fail_free_irq:
 fail_unregister:
 	tty_unregister_driver(serial_driver);
 fail_put_tty_driver:
+	tty_port_destroy(&state->tport);
 	put_tty_driver(serial_driver);
 	return error;
 }
@@ -1785,6 +1786,7 @@ static int __exit amiga_serial_remove(struct platform_device *pdev)
 		printk("SERIAL: failed to unregister serial driver (%d)\n",
 		       error);
 	put_tty_driver(serial_driver);
+	tty_port_destroy(&state->tport);
 
 	free_irq(IRQ_AMIGA_TBE, state);
 	free_irq(IRQ_AMIGA_RBF, state);
diff --git a/drivers/tty/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c
index 02b7d3a0969..1cfcdbf1d0c 100644
--- a/drivers/tty/bfin_jtag_comm.c
+++ b/drivers/tty/bfin_jtag_comm.c
@@ -240,8 +240,6 @@ static int __init bfin_jc_init(void)
 {
 	int ret;
 
-	tty_port_init(&port);
-
 	bfin_jc_kthread = kthread_create(bfin_jc_emudat_manager, NULL, DRV_NAME);
 	if (IS_ERR(bfin_jc_kthread))
 		return PTR_ERR(bfin_jc_kthread);
@@ -257,6 +255,8 @@ static int __init bfin_jc_init(void)
 	if (!bfin_jc_driver)
 		goto err_driver;
 
+	tty_port_init(&port);
+
 	bfin_jc_driver->driver_name  = DRV_NAME;
 	bfin_jc_driver->name         = DEV_NAME;
 	bfin_jc_driver->type         = TTY_DRIVER_TYPE_SERIAL;
@@ -274,6 +274,7 @@ static int __init bfin_jc_init(void)
 	return 0;
 
  err:
+	tty_port_destroy(&port);
 	put_tty_driver(bfin_jc_driver);
  err_driver:
 	kfree(bfin_jc_write_buf.buf);
@@ -289,6 +290,7 @@ static void __exit bfin_jc_exit(void)
 	kfree(bfin_jc_write_buf.buf);
 	tty_unregister_driver(bfin_jc_driver);
 	put_tty_driver(bfin_jc_driver);
+	tty_port_destroy(&port);
 }
 module_exit(bfin_jc_exit);
 
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index 0a6a0bc1b59..b09c8d1f9a6 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -3099,7 +3099,7 @@ static const struct tty_port_operations cyz_port_ops = {
  * ---------------------------------------------------------------------
  */
 
-static int __devinit cy_init_card(struct cyclades_card *cinfo)
+static int cy_init_card(struct cyclades_card *cinfo)
 {
 	struct cyclades_port *info;
 	unsigned int channel, port;
@@ -3196,7 +3196,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
 
 /* initialize chips on Cyclom-Y card -- return number of valid
    chips (which is number of ports/4) */
-static unsigned short __devinit cyy_init_card(void __iomem *true_base_addr,
+static unsigned short cyy_init_card(void __iomem *true_base_addr,
 		int index)
 {
 	unsigned int chip_number;
@@ -3405,7 +3405,7 @@ static int __init cy_detect_isa(void)
 }				/* cy_detect_isa */
 
 #ifdef CONFIG_PCI
-static inline int __devinit cyc_isfwstr(const char *str, unsigned int size)
+static inline int cyc_isfwstr(const char *str, unsigned int size)
 {
 	unsigned int a;
 
@@ -3420,7 +3420,7 @@ static inline int __devinit cyc_isfwstr(const char *str, unsigned int size)
 	return 0;
 }
 
-static inline void __devinit cyz_fpga_copy(void __iomem *fpga, const u8 *data,
+static inline void cyz_fpga_copy(void __iomem *fpga, const u8 *data,
 		unsigned int size)
 {
 	for (; size > 0; size--) {
@@ -3429,7 +3429,7 @@ static inline void __devinit cyz_fpga_copy(void __iomem *fpga, const u8 *data,
 	}
 }
 
-static void __devinit plx_init(struct pci_dev *pdev, int irq,
+static void plx_init(struct pci_dev *pdev, int irq,
 		struct RUNTIME_9060 __iomem *addr)
 {
 	/* Reset PLX */
@@ -3449,7 +3449,7 @@ static void __devinit plx_init(struct pci_dev *pdev, int irq,
 	pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, irq);
 }
 
-static int __devinit __cyz_load_fw(const struct firmware *fw,
+static int __cyz_load_fw(const struct firmware *fw,
 		const char *name, const u32 mailbox, void __iomem *base,
 		void __iomem *fpga)
 {
@@ -3526,7 +3526,7 @@ static int __devinit __cyz_load_fw(const struct firmware *fw,
 	return 0;
 }
 
-static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
+static int cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
 		struct RUNTIME_9060 __iomem *ctl_addr, int irq)
 {
 	const struct firmware *fw;
@@ -3692,7 +3692,7 @@ err:
 	return retval;
 }
 
-static int __devinit cy_pci_probe(struct pci_dev *pdev,
+static int cy_pci_probe(struct pci_dev *pdev,
 		const struct pci_device_id *ent)
 {
 	struct cyclades_card *card;
@@ -3931,10 +3931,10 @@ err:
 	return retval;
 }
 
-static void __devexit cy_pci_remove(struct pci_dev *pdev)
+static void cy_pci_remove(struct pci_dev *pdev)
 {
 	struct cyclades_card *cinfo = pci_get_drvdata(pdev);
-	unsigned int i;
+	unsigned int i, channel;
 
 	/* non-Z with old PLX */
 	if (!cy_is_Z(cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) ==
@@ -3960,9 +3960,11 @@ static void __devexit cy_pci_remove(struct pci_dev *pdev)
 	pci_release_regions(pdev);
 
 	cinfo->base_addr = NULL;
-	for (i = cinfo->first_line; i < cinfo->first_line +
-			cinfo->nports; i++)
+	for (channel = 0, i = cinfo->first_line; i < cinfo->first_line +
+			cinfo->nports; i++, channel++) {
 		tty_unregister_device(cy_serial_driver, i);
+		tty_port_destroy(&cinfo->ports[channel].port);
+	}
 	cinfo->nports = 0;
 	kfree(cinfo->ports);
 }
@@ -3971,7 +3973,7 @@ static struct pci_driver cy_pci_driver = {
 	.name = "cyclades",
 	.id_table = cy_pci_dev_id,
 	.probe = cy_pci_probe,
-	.remove = __devexit_p(cy_pci_remove)
+	.remove = cy_pci_remove
 };
 #endif
 
diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c
index 4ab936b7aac..c117d775a22 100644
--- a/drivers/tty/ehv_bytechan.c
+++ b/drivers/tty/ehv_bytechan.c
@@ -699,7 +699,7 @@ static const struct tty_port_operations ehv_bc_tty_port_ops = {
 	.shutdown = ehv_bc_tty_port_shutdown,
 };
 
-static int __devinit ehv_bc_tty_probe(struct platform_device *pdev)
+static int ehv_bc_tty_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct ehv_bc_data *bc;
@@ -757,6 +757,7 @@ static int __devinit ehv_bc_tty_probe(struct platform_device *pdev)
 	return 0;
 
 error:
+	tty_port_destroy(&bc->port);
 	irq_dispose_mapping(bc->tx_irq);
 	irq_dispose_mapping(bc->rx_irq);
 
@@ -770,6 +771,7 @@ static int ehv_bc_tty_remove(struct platform_device *pdev)
 
 	tty_unregister_device(ehv_bc_driver, bc - bcs);
 
+	tty_port_destroy(&bc->port);
 	irq_dispose_mapping(bc->tx_irq);
 	irq_dispose_mapping(bc->rx_irq);
 
diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c
index 0d2ea0c224c..be1a9a1e749 100644
--- a/drivers/tty/hvc/hvc_opal.c
+++ b/drivers/tty/hvc/hvc_opal.c
@@ -41,7 +41,7 @@
 
 static const char hvc_opal_name[] = "hvc_opal";
 
-static struct of_device_id hvc_opal_match[] __devinitdata = {
+static struct of_device_id hvc_opal_match[] = {
 	{ .name = "serial", .compatible = "ibm,opal-console-raw" },
 	{ .name = "serial", .compatible = "ibm,opal-console-hvsi" },
 	{ },
@@ -161,7 +161,7 @@ static const struct hv_ops hvc_opal_hvsi_ops = {
 	.tiocmset = hvc_opal_hvsi_tiocmset,
 };
 
-static int __devinit hvc_opal_probe(struct platform_device *dev)
+static int hvc_opal_probe(struct platform_device *dev)
 {
 	const struct hv_ops *ops;
 	struct hvc_struct *hp;
@@ -222,7 +222,7 @@ static int __devinit hvc_opal_probe(struct platform_device *dev)
 	return 0;
 }
 
-static int __devexit hvc_opal_remove(struct platform_device *dev)
+static int hvc_opal_remove(struct platform_device *dev)
 {
 	struct hvc_struct *hp = dev_get_drvdata(&dev->dev);
 	int rc, termno;
@@ -239,7 +239,7 @@ static int __devexit hvc_opal_remove(struct platform_device *dev)
 
 static struct platform_driver hvc_opal_driver = {
 	.probe		= hvc_opal_probe,
-	.remove		= __devexit_p(hvc_opal_remove),
+	.remove		= hvc_opal_remove,
 	.driver		= {
 		.name	= hvc_opal_name,
 		.owner	= THIS_MODULE,
diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c
index 070c0ee6864..ed6f5f1f5a5 100644
--- a/drivers/tty/hvc/hvc_vio.c
+++ b/drivers/tty/hvc/hvc_vio.c
@@ -53,7 +53,7 @@
 
 static const char hvc_driver_name[] = "hvc_console";
 
-static struct vio_device_id hvc_driver_table[] __devinitdata = {
+static struct vio_device_id hvc_driver_table[] = {
 	{"serial", "hvterm1"},
 #ifndef HVC_OLD_HVSI
 	{"serial", "hvterm-protocol"},
@@ -293,7 +293,7 @@ static int udbg_hvc_getc(void)
 	}
 }
 
-static int __devinit hvc_vio_probe(struct vio_dev *vdev,
+static int hvc_vio_probe(struct vio_dev *vdev,
 				   const struct vio_device_id *id)
 {
 	const struct hv_ops *ops;
@@ -362,7 +362,7 @@ static int __devinit hvc_vio_probe(struct vio_dev *vdev,
 	return 0;
 }
 
-static int __devexit hvc_vio_remove(struct vio_dev *vdev)
+static int hvc_vio_remove(struct vio_dev *vdev)
 {
 	struct hvc_struct *hp = dev_get_drvdata(&vdev->dev);
 	int rc, termno;
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index f4abfe238f9..19843ec3f80 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -422,7 +422,7 @@ static int xencons_connect_backend(struct xenbus_device *dev,
 	return ret;
 }
 
-static int __devinit xencons_probe(struct xenbus_device *dev,
+static int xencons_probe(struct xenbus_device *dev,
 				  const struct xenbus_device_id *id)
 {
 	int ret, devid;
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index cab5c7adf8e..87763573395 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -330,12 +330,12 @@ static int hvcs_open(struct tty_struct *tty, struct file *filp);
 static void hvcs_close(struct tty_struct *tty, struct file *filp);
 static void hvcs_hangup(struct tty_struct * tty);
 
-static int __devinit hvcs_probe(struct vio_dev *dev,
+static int hvcs_probe(struct vio_dev *dev,
 		const struct vio_device_id *id);
-static int __devexit hvcs_remove(struct vio_dev *dev);
+static int hvcs_remove(struct vio_dev *dev);
 static int __init hvcs_module_init(void);
 static void __exit hvcs_module_exit(void);
-static int __devinit hvcs_initialize(void);
+static int hvcs_initialize(void);
 
 #define HVCS_SCHED_READ	0x00000001
 #define HVCS_QUICK_READ	0x00000002
@@ -676,7 +676,7 @@ static int khvcsd(void *unused)
 	return 0;
 }
 
-static struct vio_device_id hvcs_driver_table[] __devinitdata= {
+static struct vio_device_id hvcs_driver_table[] = {
 	{"serial-server", "hvterm2"},
 	{ "", "" }
 };
@@ -756,7 +756,7 @@ static int hvcs_get_index(void)
 	return -1;
 }
 
-static int __devinit hvcs_probe(
+static int hvcs_probe(
 	struct vio_dev *dev,
 	const struct vio_device_id *id)
 {
@@ -835,7 +835,7 @@ static int __devinit hvcs_probe(
 	return 0;
 }
 
-static int __devexit hvcs_remove(struct vio_dev *dev)
+static int hvcs_remove(struct vio_dev *dev)
 {
 	struct hvcs_struct *hvcsd = dev_get_drvdata(&dev->dev);
 	unsigned long flags;
@@ -874,7 +874,7 @@ static int __devexit hvcs_remove(struct vio_dev *dev)
 static struct vio_driver hvcs_vio_driver = {
 	.id_table	= hvcs_driver_table,
 	.probe		= hvcs_probe,
-	.remove		= __devexit_p(hvcs_remove),
+	.remove		= hvcs_remove,
 	.name		= hvcs_driver_name,
 };
 
@@ -1478,7 +1478,7 @@ static void hvcs_free_index_list(void)
 	hvcs_index_count = 0;
 }
 
-static int __devinit hvcs_initialize(void)
+static int hvcs_initialize(void)
 {
 	int rc, num_ttys_to_alloc;
 
@@ -1496,8 +1496,10 @@ static int __devinit hvcs_initialize(void)
 		num_ttys_to_alloc = hvcs_parm_num_devs;
 
 	hvcs_tty_driver = alloc_tty_driver(num_ttys_to_alloc);
-	if (!hvcs_tty_driver)
+	if (!hvcs_tty_driver) {
+		mutex_unlock(&hvcs_init_mutex);
 		return -ENOMEM;
+	}
 
 	if (hvcs_alloc_index_list(num_ttys_to_alloc)) {
 		rc = -ENOMEM;
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index 5b95b4f28cf..68357a6e4de 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -1218,6 +1218,7 @@ static int __init hvsi_console_init(void)
 		if (hp->virq == 0) {
 			printk(KERN_ERR "%s: couldn't create irq mapping for 0x%x\n",
 				__func__, irq[0]);
+			tty_port_destroy(&hp->port);
 			continue;
 		}
 
diff --git a/drivers/tty/ipwireless/network.c b/drivers/tty/ipwireless/network.c
index 57102e66165..c0dfb642383 100644
--- a/drivers/tty/ipwireless/network.c
+++ b/drivers/tty/ipwireless/network.c
@@ -352,6 +352,8 @@ static struct sk_buff *ipw_packet_received_skb(unsigned char *data,
 	}
 
 	skb = dev_alloc_skb(length + 4);
+	if (skb == NULL)
+		return NULL;
 	skb_reserve(skb, 2);
 	memcpy(skb_put(skb, length), data, length);
 
@@ -397,7 +399,8 @@ void ipwireless_network_packet_received(struct ipw_network *network,
 
 				/* Send the data to the ppp_generic module. */
 				skb = ipw_packet_received_skb(data, length);
-				ppp_input(network->ppp_channel, skb);
+				if (skb)
+					ppp_input(network->ppp_channel, skb);
 			} else
 				spin_unlock_irqrestore(&network->lock,
 						flags);
diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c
index 160f0ad9589..2cde13ddf9f 100644
--- a/drivers/tty/ipwireless/tty.c
+++ b/drivers/tty/ipwireless/tty.c
@@ -566,6 +566,7 @@ void ipwireless_tty_free(struct ipw_tty *tty)
 			ipwireless_disassociate_network_ttys(network,
 							     ttyj->channel_idx);
 			tty_unregister_device(ipw_tty_driver, j);
+			tty_port_destroy(&ttyj->port);
 			ttys[j] = NULL;
 			mutex_unlock(&ttyj->ipw_tty_mutex);
 			kfree(ttyj);
diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c
index d7492e18360..3205b2e9090 100644
--- a/drivers/tty/isicom.c
+++ b/drivers/tty/isicom.c
@@ -148,7 +148,7 @@
 #endif
 
 static int isicom_probe(struct pci_dev *, const struct pci_device_id *);
-static void __devexit isicom_remove(struct pci_dev *);
+static void isicom_remove(struct pci_dev *);
 
 static struct pci_device_id isicom_pci_tbl[] = {
 	{ PCI_DEVICE(VENDOR_ID, 0x2028) },
@@ -168,7 +168,7 @@ static struct pci_driver isicom_driver = {
 	.name		= "isicom",
 	.id_table	= isicom_pci_tbl,
 	.probe		= isicom_probe,
-	.remove		= __devexit_p(isicom_remove)
+	.remove		= isicom_remove
 };
 
 static int prev_card = 3;	/*	start servicing isi_card[0]	*/
@@ -603,7 +603,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
 			if (tty_port_cts_enabled(&port->port)) {
 				if (tty->hw_stopped) {
 					if (header & ISI_CTS) {
-						port->port.tty->hw_stopped = 0;
+						tty->hw_stopped = 0;
 						/* start tx ing */
 						port->status |= (ISI_TXOK
 							| ISI_CTS);
@@ -1307,7 +1307,7 @@ static const struct tty_port_operations isicom_port_ops = {
 	.shutdown		= isicom_shutdown,
 };
 
-static int __devinit reset_card(struct pci_dev *pdev,
+static int reset_card(struct pci_dev *pdev,
 	const unsigned int card, unsigned int *signature)
 {
 	struct isi_board *board = pci_get_drvdata(pdev);
@@ -1368,7 +1368,7 @@ end:
 	return retval;
 }
 
-static int __devinit load_firmware(struct pci_dev *pdev,
+static int load_firmware(struct pci_dev *pdev,
 	const unsigned int index, const unsigned int signature)
 {
 	struct isi_board *board = pci_get_drvdata(pdev);
@@ -1548,7 +1548,7 @@ end:
  */
 static unsigned int card_count;
 
-static int __devinit isicom_probe(struct pci_dev *pdev,
+static int isicom_probe(struct pci_dev *pdev,
 	const struct pci_device_id *ent)
 {
 	unsigned int uninitialized_var(signature), index;
@@ -1610,10 +1610,15 @@ static int __devinit isicom_probe(struct pci_dev *pdev,
 	if (retval < 0)
 		goto errunri;
 
-	for (index = 0; index < board->port_count; index++)
-		tty_port_register_device(&board->ports[index].port,
-				isicom_normal, board->index * 16 + index,
-				&pdev->dev);
+	for (index = 0; index < board->port_count; index++) {
+		struct tty_port *tport = &board->ports[index].port;
+		tty_port_init(tport);
+		tport->ops = &isicom_port_ops;
+		tport->close_delay = 50 * HZ/100;
+		tport->closing_wait = 3000 * HZ/100;
+		tty_port_register_device(tport, isicom_normal,
+				board->index * 16 + index, &pdev->dev);
+	}
 
 	return 0;
 
@@ -1630,13 +1635,15 @@ err:
 	return retval;
 }
 
-static void __devexit isicom_remove(struct pci_dev *pdev)
+static void isicom_remove(struct pci_dev *pdev)
 {
 	struct isi_board *board = pci_get_drvdata(pdev);
 	unsigned int i;
 
-	for (i = 0; i < board->port_count; i++)
+	for (i = 0; i < board->port_count; i++) {
 		tty_unregister_device(isicom_normal, board->index * 16 + i);
+		tty_port_destroy(&board->ports[i].port);
+	}
 
 	free_irq(board->irq, board);
 	pci_release_region(pdev, 3);
@@ -1655,13 +1662,9 @@ static int __init isicom_init(void)
 		isi_card[idx].ports = port;
 		spin_lock_init(&isi_card[idx].card_lock);
 		for (channel = 0; channel < 16; channel++, port++) {
-			tty_port_init(&port->port);
-			port->port.ops = &isicom_port_ops;
 			port->magic = ISICOM_MAGIC;
 			port->card = &isi_card[idx];
 			port->channel = channel;
-			port->port.close_delay = 50 * HZ/100;
-			port->port.closing_wait = 3000 * HZ/100;
 			port->status = 0;
 			/*  . . .  */
 		}
diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c
index 56e616b9109..f9d28503bde 100644
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -895,6 +895,8 @@ static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev)
 
 	return 0;
 err_free:
+	for (i = 0; i < MAX_PORTS_PER_BOARD; i++)
+		tty_port_destroy(&brd->ports[i].port);
 	kfree(brd->ports);
 err:
 	return ret;
@@ -919,6 +921,8 @@ static void moxa_board_deinit(struct moxa_board_conf *brd)
 				tty_kref_put(tty);
 			}
 		}
+	for (a = 0; a < MAX_PORTS_PER_BOARD; a++)
+		tty_port_destroy(&brd->ports[a].port);
 	while (1) {
 		opened = 0;
 		for (a = 0; a < brd->numPorts; a++)
@@ -941,7 +945,7 @@ static void moxa_board_deinit(struct moxa_board_conf *brd)
 }
 
 #ifdef CONFIG_PCI
-static int __devinit moxa_pci_probe(struct pci_dev *pdev,
+static int moxa_pci_probe(struct pci_dev *pdev,
 		const struct pci_device_id *ent)
 {
 	struct moxa_board_conf *board;
@@ -1016,7 +1020,7 @@ err:
 	return retval;
 }
 
-static void __devexit moxa_pci_remove(struct pci_dev *pdev)
+static void moxa_pci_remove(struct pci_dev *pdev)
 {
 	struct moxa_board_conf *brd = pci_get_drvdata(pdev);
 
@@ -1029,7 +1033,7 @@ static struct pci_driver moxa_pci_driver = {
 	.name = "moxa",
 	.id_table = moxa_pcibrds,
 	.probe = moxa_pci_probe,
-	.remove = __devexit_p(moxa_pci_remove)
+	.remove = moxa_pci_remove
 };
 #endif /* CONFIG_PCI */
 
@@ -1370,7 +1374,7 @@ static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
         	p->DCDState = dcd;
         	spin_unlock_irqrestore(&p->port.lock, flags);
 		tty = tty_port_tty_get(&p->port);
-		if (tty && C_CLOCAL(tty) && !dcd)
+		if (tty && !C_CLOCAL(tty) && !dcd)
 			tty_hangup(tty);
 		tty_kref_put(tty);
 	}
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index cfda47dabd2..40113868bec 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -487,7 +487,7 @@ static void mxser_disable_must_rx_software_flow_control(unsigned long baseio)
 }
 
 #ifdef CONFIG_PCI
-static int __devinit CheckIsMoxaMust(unsigned long io)
+static int CheckIsMoxaMust(unsigned long io)
 {
 	u8 oldmcr, hwid;
 	int i;
@@ -2369,7 +2369,7 @@ static void mxser_release_ISA_res(struct mxser_board *brd)
 	mxser_release_vector(brd);
 }
 
-static int __devinit mxser_initbrd(struct mxser_board *brd,
+static int mxser_initbrd(struct mxser_board *brd,
 		struct pci_dev *pdev)
 {
 	struct mxser_port *info;
@@ -2411,14 +2411,27 @@ static int __devinit mxser_initbrd(struct mxser_board *brd,
 
 	retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser",
 			brd);
-	if (retval)
+	if (retval) {
+		for (i = 0; i < brd->info->nports; i++)
+			tty_port_destroy(&brd->ports[i].port);
 		printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may "
 			"conflict with another device.\n",
 			brd->info->name, brd->irq);
+	}
 
 	return retval;
 }
 
+static void mxser_board_remove(struct mxser_board *brd)
+{
+	unsigned int i;
+
+	for (i = 0; i < brd->info->nports; i++) {
+		tty_unregister_device(mxvar_sdriver, brd->idx + i);
+		tty_port_destroy(&brd->ports[i].port);
+	}
+}
+
 static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
 {
 	int id, i, bits, ret;
@@ -2534,7 +2547,7 @@ err_irqconflict:
 	return -EIO;
 }
 
-static int __devinit mxser_probe(struct pci_dev *pdev,
+static int mxser_probe(struct pci_dev *pdev,
 		const struct pci_device_id *ent)
 {
 #ifdef CONFIG_PCI
@@ -2645,14 +2658,12 @@ err:
 #endif
 }
 
-static void __devexit mxser_remove(struct pci_dev *pdev)
+static void mxser_remove(struct pci_dev *pdev)
 {
 #ifdef CONFIG_PCI
 	struct mxser_board *brd = pci_get_drvdata(pdev);
-	unsigned int i;
 
-	for (i = 0; i < brd->info->nports; i++)
-		tty_unregister_device(mxvar_sdriver, brd->idx + i);
+	mxser_board_remove(brd);
 
 	free_irq(pdev->irq, brd);
 	pci_release_region(pdev, 2);
@@ -2666,7 +2677,7 @@ static struct pci_driver mxser_driver = {
 	.name = "mxser",
 	.id_table = mxser_pcibrds,
 	.probe = mxser_probe,
-	.remove = __devexit_p(mxser_remove)
+	.remove = mxser_remove
 };
 
 static int __init mxser_module_init(void)
@@ -2748,15 +2759,13 @@ err_put:
 
 static void __exit mxser_module_exit(void)
 {
-	unsigned int i, j;
+	unsigned int i;
 
 	pci_unregister_driver(&mxser_driver);
 
 	for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */
 		if (mxser_boards[i].info != NULL)
-			for (j = 0; j < mxser_boards[i].info->nports; j++)
-				tty_unregister_device(mxvar_sdriver,
-						mxser_boards[i].idx + j);
+			mxser_board_remove(&mxser_boards[i]);
 	tty_unregister_driver(mxvar_sdriver);
 	put_tty_driver(mxvar_sdriver);
 
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 1e8e8ce5595..dcc0430a49c 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -134,7 +134,6 @@ struct gsm_dlci {
 #define DLCI_OPENING		1	/* Sending SABM not seen UA */
 #define DLCI_OPEN		2	/* SABM/UA complete */
 #define DLCI_CLOSING		3	/* Sending DISC not seen UA/DM */
-	struct kref ref;		/* freed from port or mux close */
 	struct mutex mutex;
 
 	/* Link layer */
@@ -1635,7 +1634,6 @@ static struct gsm_dlci *gsm_dlci_alloc(struct gsm_mux *gsm, int addr)
 	if (dlci == NULL)
 		return NULL;
 	spin_lock_init(&dlci->lock);
-	kref_init(&dlci->ref);
 	mutex_init(&dlci->mutex);
 	dlci->fifo = &dlci->_fifo;
 	if (kfifo_alloc(&dlci->_fifo, 4096, GFP_KERNEL) < 0) {
@@ -1669,9 +1667,9 @@ static struct gsm_dlci *gsm_dlci_alloc(struct gsm_mux *gsm, int addr)
  *
  *	Can sleep.
  */
-static void gsm_dlci_free(struct kref *ref)
+static void gsm_dlci_free(struct tty_port *port)
 {
-	struct gsm_dlci *dlci = container_of(ref, struct gsm_dlci, ref);
+	struct gsm_dlci *dlci = container_of(port, struct gsm_dlci, port);
 
 	del_timer_sync(&dlci->t1);
 	dlci->gsm->dlci[dlci->addr] = NULL;
@@ -1683,12 +1681,12 @@ static void gsm_dlci_free(struct kref *ref)
 
 static inline void dlci_get(struct gsm_dlci *dlci)
 {
-	kref_get(&dlci->ref);
+	tty_port_get(&dlci->port);
 }
 
 static inline void dlci_put(struct gsm_dlci *dlci)
 {
-	kref_put(&dlci->ref, gsm_dlci_free);
+	tty_port_put(&dlci->port);
 }
 
 /**
@@ -2874,6 +2872,7 @@ static void gsm_dtr_rts(struct tty_port *port, int onoff)
 static const struct tty_port_operations gsm_port_ops = {
 	.carrier_raised = gsm_carrier_raised,
 	.dtr_rts = gsm_dtr_rts,
+	.destruct = gsm_dlci_free,
 };
 
 static int gsmtty_install(struct tty_driver *driver, struct tty_struct *tty)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 8c0b7b42319..19083efa231 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -73,10 +73,42 @@
 #define ECHO_OP_SET_CANON_COL 0x81
 #define ECHO_OP_ERASE_TAB 0x82
 
+struct n_tty_data {
+	unsigned int column;
+	unsigned long overrun_time;
+	int num_overrun;
+
+	unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
+	unsigned char echo_overrun:1;
+
+	DECLARE_BITMAP(process_char_map, 256);
+	DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE);
+
+	char *read_buf;
+	int read_head;
+	int read_tail;
+	int read_cnt;
+
+	unsigned char *echo_buf;
+	unsigned int echo_pos;
+	unsigned int echo_cnt;
+
+	int canon_data;
+	unsigned long canon_head;
+	unsigned int canon_column;
+
+	struct mutex atomic_read_lock;
+	struct mutex output_lock;
+	struct mutex echo_lock;
+	spinlock_t read_lock;
+};
+
 static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
 			       unsigned char __user *ptr)
 {
-	tty_audit_add_data(tty, &x, 1);
+	struct n_tty_data *ldata = tty->disc_data;
+
+	tty_audit_add_data(tty, &x, 1, ldata->icanon);
 	return put_user(x, ptr);
 }
 
@@ -92,17 +124,18 @@ static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
 
 static void n_tty_set_room(struct tty_struct *tty)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	int left;
 	int old_left;
 
-	/* tty->read_cnt is not read locked ? */
+	/* ldata->read_cnt is not read locked ? */
 	if (I_PARMRK(tty)) {
 		/* Multiply read_cnt by 3, since each byte might take up to
 		 * three times as many spaces when PARMRK is set (depending on
 		 * its flags, e.g. parity error). */
-		left = N_TTY_BUF_SIZE - tty->read_cnt * 3 - 1;
+		left = N_TTY_BUF_SIZE - ldata->read_cnt * 3 - 1;
 	} else
-		left = N_TTY_BUF_SIZE - tty->read_cnt - 1;
+		left = N_TTY_BUF_SIZE - ldata->read_cnt - 1;
 
 	/*
 	 * If we are doing input canonicalization, and there are no
@@ -111,44 +144,47 @@ static void n_tty_set_room(struct tty_struct *tty)
 	 * characters will be beeped.
 	 */
 	if (left <= 0)
-		left = tty->icanon && !tty->canon_data;
+		left = ldata->icanon && !ldata->canon_data;
 	old_left = tty->receive_room;
 	tty->receive_room = left;
 
 	/* Did this open up the receive buffer? We may need to flip */
-	if (left && !old_left)
-		schedule_work(&tty->buf.work);
+	if (left && !old_left) {
+		WARN_RATELIMIT(tty->port->itty == NULL,
+				"scheduling with invalid itty\n");
+		schedule_work(&tty->port->buf.work);
+	}
 }
 
-static void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty)
+static void put_tty_queue_nolock(unsigned char c, struct n_tty_data *ldata)
 {
-	if (tty->read_cnt < N_TTY_BUF_SIZE) {
-		tty->read_buf[tty->read_head] = c;
-		tty->read_head = (tty->read_head + 1) & (N_TTY_BUF_SIZE-1);
-		tty->read_cnt++;
+	if (ldata->read_cnt < N_TTY_BUF_SIZE) {
+		ldata->read_buf[ldata->read_head] = c;
+		ldata->read_head = (ldata->read_head + 1) & (N_TTY_BUF_SIZE-1);
+		ldata->read_cnt++;
 	}
 }
 
 /**
  *	put_tty_queue		-	add character to tty
  *	@c: character
- *	@tty: tty device
+ *	@ldata: n_tty data
  *
  *	Add a character to the tty read_buf queue. This is done under the
  *	read_lock to serialize character addition and also to protect us
  *	against parallel reads or flushes
  */
 
-static void put_tty_queue(unsigned char c, struct tty_struct *tty)
+static void put_tty_queue(unsigned char c, struct n_tty_data *ldata)
 {
 	unsigned long flags;
 	/*
 	 *	The problem of stomping on the buffers ends here.
 	 *	Why didn't anyone see this one coming? --AJK
 	*/
-	spin_lock_irqsave(&tty->read_lock, flags);
-	put_tty_queue_nolock(c, tty);
-	spin_unlock_irqrestore(&tty->read_lock, flags);
+	spin_lock_irqsave(&ldata->read_lock, flags);
+	put_tty_queue_nolock(c, ldata);
+	spin_unlock_irqrestore(&ldata->read_lock, flags);
 }
 
 /**
@@ -179,18 +215,19 @@ static void check_unthrottle(struct tty_struct *tty)
 
 static void reset_buffer_flags(struct tty_struct *tty)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	unsigned long flags;
 
-	spin_lock_irqsave(&tty->read_lock, flags);
-	tty->read_head = tty->read_tail = tty->read_cnt = 0;
-	spin_unlock_irqrestore(&tty->read_lock, flags);
+	spin_lock_irqsave(&ldata->read_lock, flags);
+	ldata->read_head = ldata->read_tail = ldata->read_cnt = 0;
+	spin_unlock_irqrestore(&ldata->read_lock, flags);
 
-	mutex_lock(&tty->echo_lock);
-	tty->echo_pos = tty->echo_cnt = tty->echo_overrun = 0;
-	mutex_unlock(&tty->echo_lock);
+	mutex_lock(&ldata->echo_lock);
+	ldata->echo_pos = ldata->echo_cnt = ldata->echo_overrun = 0;
+	mutex_unlock(&ldata->echo_lock);
 
-	tty->canon_head = tty->canon_data = tty->erasing = 0;
-	memset(&tty->read_flags, 0, sizeof tty->read_flags);
+	ldata->canon_head = ldata->canon_data = ldata->erasing = 0;
+	bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
 	n_tty_set_room(tty);
 }
 
@@ -235,18 +272,19 @@ static void n_tty_flush_buffer(struct tty_struct *tty)
 
 static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	unsigned long flags;
 	ssize_t n = 0;
 
-	spin_lock_irqsave(&tty->read_lock, flags);
-	if (!tty->icanon) {
-		n = tty->read_cnt;
-	} else if (tty->canon_data) {
-		n = (tty->canon_head > tty->read_tail) ?
-			tty->canon_head - tty->read_tail :
-			tty->canon_head + (N_TTY_BUF_SIZE - tty->read_tail);
+	spin_lock_irqsave(&ldata->read_lock, flags);
+	if (!ldata->icanon) {
+		n = ldata->read_cnt;
+	} else if (ldata->canon_data) {
+		n = (ldata->canon_head > ldata->read_tail) ?
+			ldata->canon_head - ldata->read_tail :
+			ldata->canon_head + (N_TTY_BUF_SIZE - ldata->read_tail);
 	}
-	spin_unlock_irqrestore(&tty->read_lock, flags);
+	spin_unlock_irqrestore(&ldata->read_lock, flags);
 	return n;
 }
 
@@ -301,6 +339,7 @@ static inline int is_continuation(unsigned char c, struct tty_struct *tty)
 
 static int do_output_char(unsigned char c, struct tty_struct *tty, int space)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	int	spaces;
 
 	if (!space)
@@ -309,48 +348,48 @@ static int do_output_char(unsigned char c, struct tty_struct *tty, int space)
 	switch (c) {
 	case '\n':
 		if (O_ONLRET(tty))
-			tty->column = 0;
+			ldata->column = 0;
 		if (O_ONLCR(tty)) {
 			if (space < 2)
 				return -1;
-			tty->canon_column = tty->column = 0;
+			ldata->canon_column = ldata->column = 0;
 			tty->ops->write(tty, "\r\n", 2);
 			return 2;
 		}
-		tty->canon_column = tty->column;
+		ldata->canon_column = ldata->column;
 		break;
 	case '\r':
-		if (O_ONOCR(tty) && tty->column == 0)
+		if (O_ONOCR(tty) && ldata->column == 0)
 			return 0;
 		if (O_OCRNL(tty)) {
 			c = '\n';
 			if (O_ONLRET(tty))
-				tty->canon_column = tty->column = 0;
+				ldata->canon_column = ldata->column = 0;
 			break;
 		}
-		tty->canon_column = tty->column = 0;
+		ldata->canon_column = ldata->column = 0;
 		break;
 	case '\t':
-		spaces = 8 - (tty->column & 7);
+		spaces = 8 - (ldata->column & 7);
 		if (O_TABDLY(tty) == XTABS) {
 			if (space < spaces)
 				return -1;
-			tty->column += spaces;
+			ldata->column += spaces;
 			tty->ops->write(tty, "        ", spaces);
 			return spaces;
 		}
-		tty->column += spaces;
+		ldata->column += spaces;
 		break;
 	case '\b':
-		if (tty->column > 0)
-			tty->column--;
+		if (ldata->column > 0)
+			ldata->column--;
 		break;
 	default:
 		if (!iscntrl(c)) {
 			if (O_OLCUC(tty))
 				c = toupper(c);
 			if (!is_continuation(c, tty))
-				tty->column++;
+				ldata->column++;
 		}
 		break;
 	}
@@ -375,14 +414,15 @@ static int do_output_char(unsigned char c, struct tty_struct *tty, int space)
 
 static int process_output(unsigned char c, struct tty_struct *tty)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	int	space, retval;
 
-	mutex_lock(&tty->output_lock);
+	mutex_lock(&ldata->output_lock);
 
 	space = tty_write_room(tty);
 	retval = do_output_char(c, tty, space);
 
-	mutex_unlock(&tty->output_lock);
+	mutex_unlock(&ldata->output_lock);
 	if (retval < 0)
 		return -1;
 	else
@@ -411,15 +451,16 @@ static int process_output(unsigned char c, struct tty_struct *tty)
 static ssize_t process_output_block(struct tty_struct *tty,
 				    const unsigned char *buf, unsigned int nr)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	int	space;
 	int	i;
 	const unsigned char *cp;
 
-	mutex_lock(&tty->output_lock);
+	mutex_lock(&ldata->output_lock);
 
 	space = tty_write_room(tty);
 	if (!space) {
-		mutex_unlock(&tty->output_lock);
+		mutex_unlock(&ldata->output_lock);
 		return 0;
 	}
 	if (nr > space)
@@ -431,30 +472,30 @@ static ssize_t process_output_block(struct tty_struct *tty,
 		switch (c) {
 		case '\n':
 			if (O_ONLRET(tty))
-				tty->column = 0;
+				ldata->column = 0;
 			if (O_ONLCR(tty))
 				goto break_out;
-			tty->canon_column = tty->column;
+			ldata->canon_column = ldata->column;
 			break;
 		case '\r':
-			if (O_ONOCR(tty) && tty->column == 0)
+			if (O_ONOCR(tty) && ldata->column == 0)
 				goto break_out;
 			if (O_OCRNL(tty))
 				goto break_out;
-			tty->canon_column = tty->column = 0;
+			ldata->canon_column = ldata->column = 0;
 			break;
 		case '\t':
 			goto break_out;
 		case '\b':
-			if (tty->column > 0)
-				tty->column--;
+			if (ldata->column > 0)
+				ldata->column--;
 			break;
 		default:
 			if (!iscntrl(c)) {
 				if (O_OLCUC(tty))
 					goto break_out;
 				if (!is_continuation(c, tty))
-					tty->column++;
+					ldata->column++;
 			}
 			break;
 		}
@@ -462,7 +503,7 @@ static ssize_t process_output_block(struct tty_struct *tty,
 break_out:
 	i = tty->ops->write(tty, buf, i);
 
-	mutex_unlock(&tty->output_lock);
+	mutex_unlock(&ldata->output_lock);
 	return i;
 }
 
@@ -494,21 +535,22 @@ break_out:
 
 static void process_echoes(struct tty_struct *tty)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	int	space, nr;
 	unsigned char c;
 	unsigned char *cp, *buf_end;
 
-	if (!tty->echo_cnt)
+	if (!ldata->echo_cnt)
 		return;
 
-	mutex_lock(&tty->output_lock);
-	mutex_lock(&tty->echo_lock);
+	mutex_lock(&ldata->output_lock);
+	mutex_lock(&ldata->echo_lock);
 
 	space = tty_write_room(tty);
 
-	buf_end = tty->echo_buf + N_TTY_BUF_SIZE;
-	cp = tty->echo_buf + tty->echo_pos;
-	nr = tty->echo_cnt;
+	buf_end = ldata->echo_buf + N_TTY_BUF_SIZE;
+	cp = ldata->echo_buf + ldata->echo_pos;
+	nr = ldata->echo_cnt;
 	while (nr > 0) {
 		c = *cp;
 		if (c == ECHO_OP_START) {
@@ -545,7 +587,7 @@ static void process_echoes(struct tty_struct *tty)
 				 * Otherwise, tab spacing is normal.
 				 */
 				if (!(num_chars & 0x80))
-					num_chars += tty->canon_column;
+					num_chars += ldata->canon_column;
 				num_bs = 8 - (num_chars & 7);
 
 				if (num_bs > space) {
@@ -555,22 +597,22 @@ static void process_echoes(struct tty_struct *tty)
 				space -= num_bs;
 				while (num_bs--) {
 					tty_put_char(tty, '\b');
-					if (tty->column > 0)
-						tty->column--;
+					if (ldata->column > 0)
+						ldata->column--;
 				}
 				cp += 3;
 				nr -= 3;
 				break;
 
 			case ECHO_OP_SET_CANON_COL:
-				tty->canon_column = tty->column;
+				ldata->canon_column = ldata->column;
 				cp += 2;
 				nr -= 2;
 				break;
 
 			case ECHO_OP_MOVE_BACK_COL:
-				if (tty->column > 0)
-					tty->column--;
+				if (ldata->column > 0)
+					ldata->column--;
 				cp += 2;
 				nr -= 2;
 				break;
@@ -582,7 +624,7 @@ static void process_echoes(struct tty_struct *tty)
 					break;
 				}
 				tty_put_char(tty, ECHO_OP_START);
-				tty->column++;
+				ldata->column++;
 				space--;
 				cp += 2;
 				nr -= 2;
@@ -604,7 +646,7 @@ static void process_echoes(struct tty_struct *tty)
 				}
 				tty_put_char(tty, '^');
 				tty_put_char(tty, op ^ 0100);
-				tty->column += 2;
+				ldata->column += 2;
 				space -= 2;
 				cp += 2;
 				nr -= 2;
@@ -635,20 +677,20 @@ static void process_echoes(struct tty_struct *tty)
 	}
 
 	if (nr == 0) {
-		tty->echo_pos = 0;
-		tty->echo_cnt = 0;
-		tty->echo_overrun = 0;
+		ldata->echo_pos = 0;
+		ldata->echo_cnt = 0;
+		ldata->echo_overrun = 0;
 	} else {
-		int num_processed = tty->echo_cnt - nr;
-		tty->echo_pos += num_processed;
-		tty->echo_pos &= N_TTY_BUF_SIZE - 1;
-		tty->echo_cnt = nr;
+		int num_processed = ldata->echo_cnt - nr;
+		ldata->echo_pos += num_processed;
+		ldata->echo_pos &= N_TTY_BUF_SIZE - 1;
+		ldata->echo_cnt = nr;
 		if (num_processed > 0)
-			tty->echo_overrun = 0;
+			ldata->echo_overrun = 0;
 	}
 
-	mutex_unlock(&tty->echo_lock);
-	mutex_unlock(&tty->output_lock);
+	mutex_unlock(&ldata->echo_lock);
+	mutex_unlock(&ldata->output_lock);
 
 	if (tty->ops->flush_chars)
 		tty->ops->flush_chars(tty);
@@ -657,72 +699,70 @@ static void process_echoes(struct tty_struct *tty)
 /**
  *	add_echo_byte	-	add a byte to the echo buffer
  *	@c: unicode byte to echo
- *	@tty: terminal device
+ *	@ldata: n_tty data
  *
  *	Add a character or operation byte to the echo buffer.
  *
  *	Should be called under the echo lock to protect the echo buffer.
  */
 
-static void add_echo_byte(unsigned char c, struct tty_struct *tty)
+static void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
 {
 	int	new_byte_pos;
 
-	if (tty->echo_cnt == N_TTY_BUF_SIZE) {
+	if (ldata->echo_cnt == N_TTY_BUF_SIZE) {
 		/* Circular buffer is already at capacity */
-		new_byte_pos = tty->echo_pos;
+		new_byte_pos = ldata->echo_pos;
 
 		/*
 		 * Since the buffer start position needs to be advanced,
 		 * be sure to step by a whole operation byte group.
 		 */
-		if (tty->echo_buf[tty->echo_pos] == ECHO_OP_START) {
-			if (tty->echo_buf[(tty->echo_pos + 1) &
+		if (ldata->echo_buf[ldata->echo_pos] == ECHO_OP_START) {
+			if (ldata->echo_buf[(ldata->echo_pos + 1) &
 					  (N_TTY_BUF_SIZE - 1)] ==
 						ECHO_OP_ERASE_TAB) {
-				tty->echo_pos += 3;
-				tty->echo_cnt -= 2;
+				ldata->echo_pos += 3;
+				ldata->echo_cnt -= 2;
 			} else {
-				tty->echo_pos += 2;
-				tty->echo_cnt -= 1;
+				ldata->echo_pos += 2;
+				ldata->echo_cnt -= 1;
 			}
 		} else {
-			tty->echo_pos++;
+			ldata->echo_pos++;
 		}
-		tty->echo_pos &= N_TTY_BUF_SIZE - 1;
+		ldata->echo_pos &= N_TTY_BUF_SIZE - 1;
 
-		tty->echo_overrun = 1;
+		ldata->echo_overrun = 1;
 	} else {
-		new_byte_pos = tty->echo_pos + tty->echo_cnt;
+		new_byte_pos = ldata->echo_pos + ldata->echo_cnt;
 		new_byte_pos &= N_TTY_BUF_SIZE - 1;
-		tty->echo_cnt++;
+		ldata->echo_cnt++;
 	}
 
-	tty->echo_buf[new_byte_pos] = c;
+	ldata->echo_buf[new_byte_pos] = c;
 }
 
 /**
  *	echo_move_back_col	-	add operation to move back a column
- *	@tty: terminal device
+ *	@ldata: n_tty data
  *
  *	Add an operation to the echo buffer to move back one column.
  *
  *	Locking: echo_lock to protect the echo buffer
  */
 
-static void echo_move_back_col(struct tty_struct *tty)
+static void echo_move_back_col(struct n_tty_data *ldata)
 {
-	mutex_lock(&tty->echo_lock);
-
-	add_echo_byte(ECHO_OP_START, tty);
-	add_echo_byte(ECHO_OP_MOVE_BACK_COL, tty);
-
-	mutex_unlock(&tty->echo_lock);
+	mutex_lock(&ldata->echo_lock);
+	add_echo_byte(ECHO_OP_START, ldata);
+	add_echo_byte(ECHO_OP_MOVE_BACK_COL, ldata);
+	mutex_unlock(&ldata->echo_lock);
 }
 
 /**
  *	echo_set_canon_col	-	add operation to set the canon column
- *	@tty: terminal device
+ *	@ldata: n_tty data
  *
  *	Add an operation to the echo buffer to set the canon column
  *	to the current column.
@@ -730,21 +770,19 @@ static void echo_move_back_col(struct tty_struct *tty)
  *	Locking: echo_lock to protect the echo buffer
  */
 
-static void echo_set_canon_col(struct tty_struct *tty)
+static void echo_set_canon_col(struct n_tty_data *ldata)
 {
-	mutex_lock(&tty->echo_lock);
-
-	add_echo_byte(ECHO_OP_START, tty);
-	add_echo_byte(ECHO_OP_SET_CANON_COL, tty);
-
-	mutex_unlock(&tty->echo_lock);
+	mutex_lock(&ldata->echo_lock);
+	add_echo_byte(ECHO_OP_START, ldata);
+	add_echo_byte(ECHO_OP_SET_CANON_COL, ldata);
+	mutex_unlock(&ldata->echo_lock);
 }
 
 /**
  *	echo_erase_tab	-	add operation to erase a tab
  *	@num_chars: number of character columns already used
  *	@after_tab: true if num_chars starts after a previous tab
- *	@tty: terminal device
+ *	@ldata: n_tty data
  *
  *	Add an operation to the echo buffer to erase a tab.
  *
@@ -758,12 +796,12 @@ static void echo_set_canon_col(struct tty_struct *tty)
  */
 
 static void echo_erase_tab(unsigned int num_chars, int after_tab,
-			   struct tty_struct *tty)
+			   struct n_tty_data *ldata)
 {
-	mutex_lock(&tty->echo_lock);
+	mutex_lock(&ldata->echo_lock);
 
-	add_echo_byte(ECHO_OP_START, tty);
-	add_echo_byte(ECHO_OP_ERASE_TAB, tty);
+	add_echo_byte(ECHO_OP_START, ldata);
+	add_echo_byte(ECHO_OP_ERASE_TAB, ldata);
 
 	/* We only need to know this modulo 8 (tab spacing) */
 	num_chars &= 7;
@@ -772,9 +810,9 @@ static void echo_erase_tab(unsigned int num_chars, int after_tab,
 	if (after_tab)
 		num_chars |= 0x80;
 
-	add_echo_byte(num_chars, tty);
+	add_echo_byte(num_chars, ldata);
 
-	mutex_unlock(&tty->echo_lock);
+	mutex_unlock(&ldata->echo_lock);
 }
 
 /**
@@ -790,18 +828,16 @@ static void echo_erase_tab(unsigned int num_chars, int after_tab,
  *	Locking: echo_lock to protect the echo buffer
  */
 
-static void echo_char_raw(unsigned char c, struct tty_struct *tty)
+static void echo_char_raw(unsigned char c, struct n_tty_data *ldata)
 {
-	mutex_lock(&tty->echo_lock);
-
+	mutex_lock(&ldata->echo_lock);
 	if (c == ECHO_OP_START) {
-		add_echo_byte(ECHO_OP_START, tty);
-		add_echo_byte(ECHO_OP_START, tty);
+		add_echo_byte(ECHO_OP_START, ldata);
+		add_echo_byte(ECHO_OP_START, ldata);
 	} else {
-		add_echo_byte(c, tty);
+		add_echo_byte(c, ldata);
 	}
-
-	mutex_unlock(&tty->echo_lock);
+	mutex_unlock(&ldata->echo_lock);
 }
 
 /**
@@ -820,30 +856,32 @@ static void echo_char_raw(unsigned char c, struct tty_struct *tty)
 
 static void echo_char(unsigned char c, struct tty_struct *tty)
 {
-	mutex_lock(&tty->echo_lock);
+	struct n_tty_data *ldata = tty->disc_data;
+
+	mutex_lock(&ldata->echo_lock);
 
 	if (c == ECHO_OP_START) {
-		add_echo_byte(ECHO_OP_START, tty);
-		add_echo_byte(ECHO_OP_START, tty);
+		add_echo_byte(ECHO_OP_START, ldata);
+		add_echo_byte(ECHO_OP_START, ldata);
 	} else {
 		if (L_ECHOCTL(tty) && iscntrl(c) && c != '\t')
-			add_echo_byte(ECHO_OP_START, tty);
-		add_echo_byte(c, tty);
+			add_echo_byte(ECHO_OP_START, ldata);
+		add_echo_byte(c, ldata);
 	}
 
-	mutex_unlock(&tty->echo_lock);
+	mutex_unlock(&ldata->echo_lock);
 }
 
 /**
  *	finish_erasing		-	complete erase
- *	@tty: tty doing the erase
+ *	@ldata: n_tty data
  */
 
-static inline void finish_erasing(struct tty_struct *tty)
+static inline void finish_erasing(struct n_tty_data *ldata)
 {
-	if (tty->erasing) {
-		echo_char_raw('/', tty);
-		tty->erasing = 0;
+	if (ldata->erasing) {
+		echo_char_raw('/', ldata);
+		ldata->erasing = 0;
 	}
 }
 
@@ -861,12 +899,13 @@ static inline void finish_erasing(struct tty_struct *tty)
 
 static void eraser(unsigned char c, struct tty_struct *tty)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	enum { ERASE, WERASE, KILL } kill_type;
 	int head, seen_alnums, cnt;
 	unsigned long flags;
 
 	/* FIXME: locking needed ? */
-	if (tty->read_head == tty->canon_head) {
+	if (ldata->read_head == ldata->canon_head) {
 		/* process_output('\a', tty); */ /* what do you think? */
 		return;
 	}
@@ -876,24 +915,24 @@ static void eraser(unsigned char c, struct tty_struct *tty)
 		kill_type = WERASE;
 	else {
 		if (!L_ECHO(tty)) {
-			spin_lock_irqsave(&tty->read_lock, flags);
-			tty->read_cnt -= ((tty->read_head - tty->canon_head) &
+			spin_lock_irqsave(&ldata->read_lock, flags);
+			ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) &
 					  (N_TTY_BUF_SIZE - 1));
-			tty->read_head = tty->canon_head;
-			spin_unlock_irqrestore(&tty->read_lock, flags);
+			ldata->read_head = ldata->canon_head;
+			spin_unlock_irqrestore(&ldata->read_lock, flags);
 			return;
 		}
 		if (!L_ECHOK(tty) || !L_ECHOKE(tty) || !L_ECHOE(tty)) {
-			spin_lock_irqsave(&tty->read_lock, flags);
-			tty->read_cnt -= ((tty->read_head - tty->canon_head) &
+			spin_lock_irqsave(&ldata->read_lock, flags);
+			ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) &
 					  (N_TTY_BUF_SIZE - 1));
-			tty->read_head = tty->canon_head;
-			spin_unlock_irqrestore(&tty->read_lock, flags);
-			finish_erasing(tty);
+			ldata->read_head = ldata->canon_head;
+			spin_unlock_irqrestore(&ldata->read_lock, flags);
+			finish_erasing(ldata);
 			echo_char(KILL_CHAR(tty), tty);
 			/* Add a newline if ECHOK is on and ECHOKE is off. */
 			if (L_ECHOK(tty))
-				echo_char_raw('\n', tty);
+				echo_char_raw('\n', ldata);
 			return;
 		}
 		kill_type = KILL;
@@ -901,14 +940,14 @@ static void eraser(unsigned char c, struct tty_struct *tty)
 
 	seen_alnums = 0;
 	/* FIXME: Locking ?? */
-	while (tty->read_head != tty->canon_head) {
-		head = tty->read_head;
+	while (ldata->read_head != ldata->canon_head) {
+		head = ldata->read_head;
 
 		/* erase a single possibly multibyte character */
 		do {
 			head = (head - 1) & (N_TTY_BUF_SIZE-1);
-			c = tty->read_buf[head];
-		} while (is_continuation(c, tty) && head != tty->canon_head);
+			c = ldata->read_buf[head];
+		} while (is_continuation(c, tty) && head != ldata->canon_head);
 
 		/* do not partially erase */
 		if (is_continuation(c, tty))
@@ -921,30 +960,31 @@ static void eraser(unsigned char c, struct tty_struct *tty)
 			else if (seen_alnums)
 				break;
 		}
-		cnt = (tty->read_head - head) & (N_TTY_BUF_SIZE-1);
-		spin_lock_irqsave(&tty->read_lock, flags);
-		tty->read_head = head;
-		tty->read_cnt -= cnt;
-		spin_unlock_irqrestore(&tty->read_lock, flags);
+		cnt = (ldata->read_head - head) & (N_TTY_BUF_SIZE-1);
+		spin_lock_irqsave(&ldata->read_lock, flags);
+		ldata->read_head = head;
+		ldata->read_cnt -= cnt;
+		spin_unlock_irqrestore(&ldata->read_lock, flags);
 		if (L_ECHO(tty)) {
 			if (L_ECHOPRT(tty)) {
-				if (!tty->erasing) {
-					echo_char_raw('\\', tty);
-					tty->erasing = 1;
+				if (!ldata->erasing) {
+					echo_char_raw('\\', ldata);
+					ldata->erasing = 1;
 				}
 				/* if cnt > 1, output a multi-byte character */
 				echo_char(c, tty);
 				while (--cnt > 0) {
 					head = (head+1) & (N_TTY_BUF_SIZE-1);
-					echo_char_raw(tty->read_buf[head], tty);
-					echo_move_back_col(tty);
+					echo_char_raw(ldata->read_buf[head],
+							ldata);
+					echo_move_back_col(ldata);
 				}
 			} else if (kill_type == ERASE && !L_ECHOE(tty)) {
 				echo_char(ERASE_CHAR(tty), tty);
 			} else if (c == '\t') {
 				unsigned int num_chars = 0;
 				int after_tab = 0;
-				unsigned long tail = tty->read_head;
+				unsigned long tail = ldata->read_head;
 
 				/*
 				 * Count the columns used for characters
@@ -953,9 +993,9 @@ static void eraser(unsigned char c, struct tty_struct *tty)
 				 * This info is used to go back the correct
 				 * number of columns.
 				 */
-				while (tail != tty->canon_head) {
+				while (tail != ldata->canon_head) {
 					tail = (tail-1) & (N_TTY_BUF_SIZE-1);
-					c = tty->read_buf[tail];
+					c = ldata->read_buf[tail];
 					if (c == '\t') {
 						after_tab = 1;
 						break;
@@ -966,25 +1006,25 @@ static void eraser(unsigned char c, struct tty_struct *tty)
 						num_chars++;
 					}
 				}
-				echo_erase_tab(num_chars, after_tab, tty);
+				echo_erase_tab(num_chars, after_tab, ldata);
 			} else {
 				if (iscntrl(c) && L_ECHOCTL(tty)) {
-					echo_char_raw('\b', tty);
-					echo_char_raw(' ', tty);
-					echo_char_raw('\b', tty);
+					echo_char_raw('\b', ldata);
+					echo_char_raw(' ', ldata);
+					echo_char_raw('\b', ldata);
 				}
 				if (!iscntrl(c) || L_ECHOCTL(tty)) {
-					echo_char_raw('\b', tty);
-					echo_char_raw(' ', tty);
-					echo_char_raw('\b', tty);
+					echo_char_raw('\b', ldata);
+					echo_char_raw(' ', ldata);
+					echo_char_raw('\b', ldata);
 				}
 			}
 		}
 		if (kill_type == ERASE)
 			break;
 	}
-	if (tty->read_head == tty->canon_head && L_ECHO(tty))
-		finish_erasing(tty);
+	if (ldata->read_head == ldata->canon_head && L_ECHO(tty))
+		finish_erasing(ldata);
 }
 
 /**
@@ -1023,6 +1063,8 @@ static inline void isig(int sig, struct tty_struct *tty, int flush)
 
 static inline void n_tty_receive_break(struct tty_struct *tty)
 {
+	struct n_tty_data *ldata = tty->disc_data;
+
 	if (I_IGNBRK(tty))
 		return;
 	if (I_BRKINT(tty)) {
@@ -1030,10 +1072,10 @@ static inline void n_tty_receive_break(struct tty_struct *tty)
 		return;
 	}
 	if (I_PARMRK(tty)) {
-		put_tty_queue('\377', tty);
-		put_tty_queue('\0', tty);
+		put_tty_queue('\377', ldata);
+		put_tty_queue('\0', ldata);
 	}
-	put_tty_queue('\0', tty);
+	put_tty_queue('\0', ldata);
 	wake_up_interruptible(&tty->read_wait);
 }
 
@@ -1052,16 +1094,17 @@ static inline void n_tty_receive_break(struct tty_struct *tty)
 
 static inline void n_tty_receive_overrun(struct tty_struct *tty)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	char buf[64];
 
-	tty->num_overrun++;
-	if (time_before(tty->overrun_time, jiffies - HZ) ||
-			time_after(tty->overrun_time, jiffies)) {
+	ldata->num_overrun++;
+	if (time_after(jiffies, ldata->overrun_time + HZ) ||
+			time_after(ldata->overrun_time, jiffies)) {
 		printk(KERN_WARNING "%s: %d input overrun(s)\n",
 			tty_name(tty, buf),
-			tty->num_overrun);
-		tty->overrun_time = jiffies;
-		tty->num_overrun = 0;
+			ldata->num_overrun);
+		ldata->overrun_time = jiffies;
+		ldata->num_overrun = 0;
 	}
 }
 
@@ -1076,16 +1119,18 @@ static inline void n_tty_receive_overrun(struct tty_struct *tty)
 static inline void n_tty_receive_parity_error(struct tty_struct *tty,
 					      unsigned char c)
 {
+	struct n_tty_data *ldata = tty->disc_data;
+
 	if (I_IGNPAR(tty))
 		return;
 	if (I_PARMRK(tty)) {
-		put_tty_queue('\377', tty);
-		put_tty_queue('\0', tty);
-		put_tty_queue(c, tty);
+		put_tty_queue('\377', ldata);
+		put_tty_queue('\0', ldata);
+		put_tty_queue(c, ldata);
 	} else	if (I_INPCK(tty))
-		put_tty_queue('\0', tty);
+		put_tty_queue('\0', ldata);
 	else
-		put_tty_queue(c, tty);
+		put_tty_queue(c, ldata);
 	wake_up_interruptible(&tty->read_wait);
 }
 
@@ -1101,11 +1146,12 @@ static inline void n_tty_receive_parity_error(struct tty_struct *tty,
 
 static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	unsigned long flags;
 	int parmrk;
 
-	if (tty->raw) {
-		put_tty_queue(c, tty);
+	if (ldata->raw) {
+		put_tty_queue(c, ldata);
 		return;
 	}
 
@@ -1115,7 +1161,7 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
 		c = tolower(c);
 
 	if (L_EXTPROC(tty)) {
-		put_tty_queue(c, tty);
+		put_tty_queue(c, ldata);
 		return;
 	}
 
@@ -1143,26 +1189,26 @@ static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
 	 * handle specially, do shortcut processing to speed things
 	 * up.
 	 */
-	if (!test_bit(c, tty->process_char_map) || tty->lnext) {
-		tty->lnext = 0;
+	if (!test_bit(c, ldata->process_char_map) || ldata->lnext) {
+		ldata->lnext = 0;
 		parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
-		if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
+		if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
 			/* beep if no space */
 			if (L_ECHO(tty))
 				process_output('\a', tty);
 			return;
 		}
 		if (L_ECHO(tty)) {
-			finish_erasing(tty);
+			finish_erasing(ldata);
 			/* Record the column of first canon char. */
-			if (tty->canon_head == tty->read_head)
-				echo_set_canon_col(tty);
+			if (ldata->canon_head == ldata->read_head)
+				echo_set_canon_col(ldata);
 			echo_char(c, tty);
 			process_echoes(tty);
 		}
 		if (parmrk)
-			put_tty_queue(c, tty);
-		put_tty_queue(c, tty);
+			put_tty_queue(c, ldata);
+		put_tty_queue(c, ldata);
 		return;
 	}
 
@@ -1218,7 +1264,7 @@ send_signal:
 	} else if (c == '\n' && I_INLCR(tty))
 		c = '\r';
 
-	if (tty->icanon) {
+	if (ldata->icanon) {
 		if (c == ERASE_CHAR(tty) || c == KILL_CHAR(tty) ||
 		    (c == WERASE_CHAR(tty) && L_IEXTEN(tty))) {
 			eraser(c, tty);
@@ -1226,12 +1272,12 @@ send_signal:
 			return;
 		}
 		if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) {
-			tty->lnext = 1;
+			ldata->lnext = 1;
 			if (L_ECHO(tty)) {
-				finish_erasing(tty);
+				finish_erasing(ldata);
 				if (L_ECHOCTL(tty)) {
-					echo_char_raw('^', tty);
-					echo_char_raw('\b', tty);
+					echo_char_raw('^', ldata);
+					echo_char_raw('\b', ldata);
 					process_echoes(tty);
 				}
 			}
@@ -1239,34 +1285,34 @@ send_signal:
 		}
 		if (c == REPRINT_CHAR(tty) && L_ECHO(tty) &&
 		    L_IEXTEN(tty)) {
-			unsigned long tail = tty->canon_head;
+			unsigned long tail = ldata->canon_head;
 
-			finish_erasing(tty);
+			finish_erasing(ldata);
 			echo_char(c, tty);
-			echo_char_raw('\n', tty);
-			while (tail != tty->read_head) {
-				echo_char(tty->read_buf[tail], tty);
+			echo_char_raw('\n', ldata);
+			while (tail != ldata->read_head) {
+				echo_char(ldata->read_buf[tail], tty);
 				tail = (tail+1) & (N_TTY_BUF_SIZE-1);
 			}
 			process_echoes(tty);
 			return;
 		}
 		if (c == '\n') {
-			if (tty->read_cnt >= N_TTY_BUF_SIZE) {
+			if (ldata->read_cnt >= N_TTY_BUF_SIZE) {
 				if (L_ECHO(tty))
 					process_output('\a', tty);
 				return;
 			}
 			if (L_ECHO(tty) || L_ECHONL(tty)) {
-				echo_char_raw('\n', tty);
+				echo_char_raw('\n', ldata);
 				process_echoes(tty);
 			}
 			goto handle_newline;
 		}
 		if (c == EOF_CHAR(tty)) {
-			if (tty->read_cnt >= N_TTY_BUF_SIZE)
+			if (ldata->read_cnt >= N_TTY_BUF_SIZE)
 				return;
-			if (tty->canon_head != tty->read_head)
+			if (ldata->canon_head != ldata->read_head)
 				set_bit(TTY_PUSH, &tty->flags);
 			c = __DISABLED_CHAR;
 			goto handle_newline;
@@ -1275,7 +1321,7 @@ send_signal:
 		    (c == EOL2_CHAR(tty) && L_IEXTEN(tty))) {
 			parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty))
 				 ? 1 : 0;
-			if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk)) {
+			if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk)) {
 				if (L_ECHO(tty))
 					process_output('\a', tty);
 				return;
@@ -1285,8 +1331,8 @@ send_signal:
 			 */
 			if (L_ECHO(tty)) {
 				/* Record the column of first canon char. */
-				if (tty->canon_head == tty->read_head)
-					echo_set_canon_col(tty);
+				if (ldata->canon_head == ldata->read_head)
+					echo_set_canon_col(ldata);
 				echo_char(c, tty);
 				process_echoes(tty);
 			}
@@ -1295,15 +1341,15 @@ send_signal:
 			 * EOL_CHAR and EOL2_CHAR?
 			 */
 			if (parmrk)
-				put_tty_queue(c, tty);
+				put_tty_queue(c, ldata);
 
 handle_newline:
-			spin_lock_irqsave(&tty->read_lock, flags);
-			set_bit(tty->read_head, tty->read_flags);
-			put_tty_queue_nolock(c, tty);
-			tty->canon_head = tty->read_head;
-			tty->canon_data++;
-			spin_unlock_irqrestore(&tty->read_lock, flags);
+			spin_lock_irqsave(&ldata->read_lock, flags);
+			set_bit(ldata->read_head, ldata->read_flags);
+			put_tty_queue_nolock(c, ldata);
+			ldata->canon_head = ldata->read_head;
+			ldata->canon_data++;
+			spin_unlock_irqrestore(&ldata->read_lock, flags);
 			kill_fasync(&tty->fasync, SIGIO, POLL_IN);
 			if (waitqueue_active(&tty->read_wait))
 				wake_up_interruptible(&tty->read_wait);
@@ -1312,29 +1358,29 @@ handle_newline:
 	}
 
 	parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
-	if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
+	if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
 		/* beep if no space */
 		if (L_ECHO(tty))
 			process_output('\a', tty);
 		return;
 	}
 	if (L_ECHO(tty)) {
-		finish_erasing(tty);
+		finish_erasing(ldata);
 		if (c == '\n')
-			echo_char_raw('\n', tty);
+			echo_char_raw('\n', ldata);
 		else {
 			/* Record the column of first canon char. */
-			if (tty->canon_head == tty->read_head)
-				echo_set_canon_col(tty);
+			if (ldata->canon_head == ldata->read_head)
+				echo_set_canon_col(ldata);
 			echo_char(c, tty);
 		}
 		process_echoes(tty);
 	}
 
 	if (parmrk)
-		put_tty_queue(c, tty);
+		put_tty_queue(c, ldata);
 
-	put_tty_queue(c, tty);
+	put_tty_queue(c, ldata);
 }
 
 
@@ -1369,33 +1415,31 @@ static void n_tty_write_wakeup(struct tty_struct *tty)
 static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 			      char *fp, int count)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	const unsigned char *p;
 	char *f, flags = TTY_NORMAL;
 	int	i;
 	char	buf[64];
 	unsigned long cpuflags;
 
-	if (!tty->read_buf)
-		return;
-
-	if (tty->real_raw) {
-		spin_lock_irqsave(&tty->read_lock, cpuflags);
-		i = min(N_TTY_BUF_SIZE - tty->read_cnt,
-			N_TTY_BUF_SIZE - tty->read_head);
+	if (ldata->real_raw) {
+		spin_lock_irqsave(&ldata->read_lock, cpuflags);
+		i = min(N_TTY_BUF_SIZE - ldata->read_cnt,
+			N_TTY_BUF_SIZE - ldata->read_head);
 		i = min(count, i);
-		memcpy(tty->read_buf + tty->read_head, cp, i);
-		tty->read_head = (tty->read_head + i) & (N_TTY_BUF_SIZE-1);
-		tty->read_cnt += i;
+		memcpy(ldata->read_buf + ldata->read_head, cp, i);
+		ldata->read_head = (ldata->read_head + i) & (N_TTY_BUF_SIZE-1);
+		ldata->read_cnt += i;
 		cp += i;
 		count -= i;
 
-		i = min(N_TTY_BUF_SIZE - tty->read_cnt,
-			N_TTY_BUF_SIZE - tty->read_head);
+		i = min(N_TTY_BUF_SIZE - ldata->read_cnt,
+			N_TTY_BUF_SIZE - ldata->read_head);
 		i = min(count, i);
-		memcpy(tty->read_buf + tty->read_head, cp, i);
-		tty->read_head = (tty->read_head + i) & (N_TTY_BUF_SIZE-1);
-		tty->read_cnt += i;
-		spin_unlock_irqrestore(&tty->read_lock, cpuflags);
+		memcpy(ldata->read_buf + ldata->read_head, cp, i);
+		ldata->read_head = (ldata->read_head + i) & (N_TTY_BUF_SIZE-1);
+		ldata->read_cnt += i;
+		spin_unlock_irqrestore(&ldata->read_lock, cpuflags);
 	} else {
 		for (i = count, p = cp, f = fp; i; i--, p++) {
 			if (f)
@@ -1426,7 +1470,7 @@ static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 
 	n_tty_set_room(tty);
 
-	if ((!tty->icanon && (tty->read_cnt >= tty->minimum_to_wake)) ||
+	if ((!ldata->icanon && (ldata->read_cnt >= tty->minimum_to_wake)) ||
 		L_EXTPROC(tty)) {
 		kill_fasync(&tty->fasync, SIGIO, POLL_IN);
 		if (waitqueue_active(&tty->read_wait))
@@ -1470,25 +1514,25 @@ int is_ignored(int sig)
 
 static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	int canon_change = 1;
-	BUG_ON(!tty);
 
 	if (old)
 		canon_change = (old->c_lflag ^ tty->termios.c_lflag) & ICANON;
 	if (canon_change) {
-		memset(&tty->read_flags, 0, sizeof tty->read_flags);
-		tty->canon_head = tty->read_tail;
-		tty->canon_data = 0;
-		tty->erasing = 0;
+		bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
+		ldata->canon_head = ldata->read_tail;
+		ldata->canon_data = 0;
+		ldata->erasing = 0;
 	}
 
-	if (canon_change && !L_ICANON(tty) && tty->read_cnt)
+	if (canon_change && !L_ICANON(tty) && ldata->read_cnt)
 		wake_up_interruptible(&tty->read_wait);
 
-	tty->icanon = (L_ICANON(tty) != 0);
+	ldata->icanon = (L_ICANON(tty) != 0);
 	if (test_bit(TTY_HW_COOK_IN, &tty->flags)) {
-		tty->raw = 1;
-		tty->real_raw = 1;
+		ldata->raw = 1;
+		ldata->real_raw = 1;
 		n_tty_set_room(tty);
 		return;
 	}
@@ -1496,51 +1540,51 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
 	    I_ICRNL(tty) || I_INLCR(tty) || L_ICANON(tty) ||
 	    I_IXON(tty) || L_ISIG(tty) || L_ECHO(tty) ||
 	    I_PARMRK(tty)) {
-		memset(tty->process_char_map, 0, 256/8);
+		bitmap_zero(ldata->process_char_map, 256);
 
 		if (I_IGNCR(tty) || I_ICRNL(tty))
-			set_bit('\r', tty->process_char_map);
+			set_bit('\r', ldata->process_char_map);
 		if (I_INLCR(tty))
-			set_bit('\n', tty->process_char_map);
+			set_bit('\n', ldata->process_char_map);
 
 		if (L_ICANON(tty)) {
-			set_bit(ERASE_CHAR(tty), tty->process_char_map);
-			set_bit(KILL_CHAR(tty), tty->process_char_map);
-			set_bit(EOF_CHAR(tty), tty->process_char_map);
-			set_bit('\n', tty->process_char_map);
-			set_bit(EOL_CHAR(tty), tty->process_char_map);
+			set_bit(ERASE_CHAR(tty), ldata->process_char_map);
+			set_bit(KILL_CHAR(tty), ldata->process_char_map);
+			set_bit(EOF_CHAR(tty), ldata->process_char_map);
+			set_bit('\n', ldata->process_char_map);
+			set_bit(EOL_CHAR(tty), ldata->process_char_map);
 			if (L_IEXTEN(tty)) {
 				set_bit(WERASE_CHAR(tty),
-					tty->process_char_map);
+					ldata->process_char_map);
 				set_bit(LNEXT_CHAR(tty),
-					tty->process_char_map);
+					ldata->process_char_map);
 				set_bit(EOL2_CHAR(tty),
-					tty->process_char_map);
+					ldata->process_char_map);
 				if (L_ECHO(tty))
 					set_bit(REPRINT_CHAR(tty),
-						tty->process_char_map);
+						ldata->process_char_map);
 			}
 		}
 		if (I_IXON(tty)) {
-			set_bit(START_CHAR(tty), tty->process_char_map);
-			set_bit(STOP_CHAR(tty), tty->process_char_map);
+			set_bit(START_CHAR(tty), ldata->process_char_map);
+			set_bit(STOP_CHAR(tty), ldata->process_char_map);
 		}
 		if (L_ISIG(tty)) {
-			set_bit(INTR_CHAR(tty), tty->process_char_map);
-			set_bit(QUIT_CHAR(tty), tty->process_char_map);
-			set_bit(SUSP_CHAR(tty), tty->process_char_map);
+			set_bit(INTR_CHAR(tty), ldata->process_char_map);
+			set_bit(QUIT_CHAR(tty), ldata->process_char_map);
+			set_bit(SUSP_CHAR(tty), ldata->process_char_map);
 		}
-		clear_bit(__DISABLED_CHAR, tty->process_char_map);
-		tty->raw = 0;
-		tty->real_raw = 0;
+		clear_bit(__DISABLED_CHAR, ldata->process_char_map);
+		ldata->raw = 0;
+		ldata->real_raw = 0;
 	} else {
-		tty->raw = 1;
+		ldata->raw = 1;
 		if ((I_IGNBRK(tty) || (!I_BRKINT(tty) && !I_PARMRK(tty))) &&
 		    (I_IGNPAR(tty) || !I_INPCK(tty)) &&
 		    (tty->driver->flags & TTY_DRIVER_REAL_RAW))
-			tty->real_raw = 1;
+			ldata->real_raw = 1;
 		else
-			tty->real_raw = 0;
+			ldata->real_raw = 0;
 	}
 	n_tty_set_room(tty);
 	/* The termios change make the tty ready for I/O */
@@ -1560,15 +1604,13 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
 
 static void n_tty_close(struct tty_struct *tty)
 {
+	struct n_tty_data *ldata = tty->disc_data;
+
 	n_tty_flush_buffer(tty);
-	if (tty->read_buf) {
-		kfree(tty->read_buf);
-		tty->read_buf = NULL;
-	}
-	if (tty->echo_buf) {
-		kfree(tty->echo_buf);
-		tty->echo_buf = NULL;
-	}
+	kfree(ldata->read_buf);
+	kfree(ldata->echo_buf);
+	kfree(ldata);
+	tty->disc_data = NULL;
 }
 
 /**
@@ -1583,37 +1625,50 @@ static void n_tty_close(struct tty_struct *tty)
 
 static int n_tty_open(struct tty_struct *tty)
 {
-	if (!tty)
-		return -EINVAL;
+	struct n_tty_data *ldata;
+
+	ldata = kzalloc(sizeof(*ldata), GFP_KERNEL);
+	if (!ldata)
+		goto err;
+
+	ldata->overrun_time = jiffies;
+	mutex_init(&ldata->atomic_read_lock);
+	mutex_init(&ldata->output_lock);
+	mutex_init(&ldata->echo_lock);
+	spin_lock_init(&ldata->read_lock);
 
 	/* These are ugly. Currently a malloc failure here can panic */
-	if (!tty->read_buf) {
-		tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
-		if (!tty->read_buf)
-			return -ENOMEM;
-	}
-	if (!tty->echo_buf) {
-		tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+	ldata->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+	ldata->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+	if (!ldata->read_buf || !ldata->echo_buf)
+		goto err_free_bufs;
 
-		if (!tty->echo_buf)
-			return -ENOMEM;
-	}
+	tty->disc_data = ldata;
 	reset_buffer_flags(tty);
 	tty_unthrottle(tty);
-	tty->column = 0;
+	ldata->column = 0;
 	n_tty_set_termios(tty, NULL);
 	tty->minimum_to_wake = 1;
 	tty->closing = 0;
+
 	return 0;
+err_free_bufs:
+	kfree(ldata->read_buf);
+	kfree(ldata->echo_buf);
+	kfree(ldata);
+err:
+	return -ENOMEM;
 }
 
 static inline int input_available_p(struct tty_struct *tty, int amt)
 {
+	struct n_tty_data *ldata = tty->disc_data;
+
 	tty_flush_to_ldisc(tty);
-	if (tty->icanon && !L_EXTPROC(tty)) {
-		if (tty->canon_data)
+	if (ldata->icanon && !L_EXTPROC(tty)) {
+		if (ldata->canon_data)
 			return 1;
-	} else if (tty->read_cnt >= (amt ? amt : 1))
+	} else if (ldata->read_cnt >= (amt ? amt : 1))
 		return 1;
 
 	return 0;
@@ -1632,7 +1687,7 @@ static inline int input_available_p(struct tty_struct *tty, int amt)
  *	buffer, and once to drain the space from the (physical) beginning of
  *	the buffer to head pointer.
  *
- *	Called under the tty->atomic_read_lock sem
+ *	Called under the ldata->atomic_read_lock sem
  *
  */
 
@@ -1641,29 +1696,31 @@ static int copy_from_read_buf(struct tty_struct *tty,
 				      size_t *nr)
 
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	int retval;
 	size_t n;
 	unsigned long flags;
 	bool is_eof;
 
 	retval = 0;
-	spin_lock_irqsave(&tty->read_lock, flags);
-	n = min(tty->read_cnt, N_TTY_BUF_SIZE - tty->read_tail);
+	spin_lock_irqsave(&ldata->read_lock, flags);
+	n = min(ldata->read_cnt, N_TTY_BUF_SIZE - ldata->read_tail);
 	n = min(*nr, n);
-	spin_unlock_irqrestore(&tty->read_lock, flags);
+	spin_unlock_irqrestore(&ldata->read_lock, flags);
 	if (n) {
-		retval = copy_to_user(*b, &tty->read_buf[tty->read_tail], n);
+		retval = copy_to_user(*b, &ldata->read_buf[ldata->read_tail], n);
 		n -= retval;
 		is_eof = n == 1 &&
-			tty->read_buf[tty->read_tail] == EOF_CHAR(tty);
-		tty_audit_add_data(tty, &tty->read_buf[tty->read_tail], n);
-		spin_lock_irqsave(&tty->read_lock, flags);
-		tty->read_tail = (tty->read_tail + n) & (N_TTY_BUF_SIZE-1);
-		tty->read_cnt -= n;
+			ldata->read_buf[ldata->read_tail] == EOF_CHAR(tty);
+		tty_audit_add_data(tty, &ldata->read_buf[ldata->read_tail], n,
+				ldata->icanon);
+		spin_lock_irqsave(&ldata->read_lock, flags);
+		ldata->read_tail = (ldata->read_tail + n) & (N_TTY_BUF_SIZE-1);
+		ldata->read_cnt -= n;
 		/* Turn single EOF into zero-length read */
-		if (L_EXTPROC(tty) && tty->icanon && is_eof && !tty->read_cnt)
+		if (L_EXTPROC(tty) && ldata->icanon && is_eof && !ldata->read_cnt)
 			n = 0;
-		spin_unlock_irqrestore(&tty->read_lock, flags);
+		spin_unlock_irqrestore(&ldata->read_lock, flags);
 		*b += n;
 		*nr -= n;
 	}
@@ -1730,6 +1787,7 @@ static int job_control(struct tty_struct *tty, struct file *file)
 static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
 			 unsigned char __user *buf, size_t nr)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	unsigned char __user *b = buf;
 	DECLARE_WAITQUEUE(wait, current);
 	int c;
@@ -1741,17 +1799,13 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
 	int packet;
 
 do_it_again:
-
-	if (WARN_ON(!tty->read_buf))
-		return -EAGAIN;
-
 	c = job_control(tty, file);
 	if (c < 0)
 		return c;
 
 	minimum = time = 0;
 	timeout = MAX_SCHEDULE_TIMEOUT;
-	if (!tty->icanon) {
+	if (!ldata->icanon) {
 		time = (HZ / 10) * TIME_CHAR(tty);
 		minimum = MIN_CHAR(tty);
 		if (minimum) {
@@ -1774,10 +1828,10 @@ do_it_again:
 	 *	Internal serialization of reads.
 	 */
 	if (file->f_flags & O_NONBLOCK) {
-		if (!mutex_trylock(&tty->atomic_read_lock))
+		if (!mutex_trylock(&ldata->atomic_read_lock))
 			return -EAGAIN;
 	} else {
-		if (mutex_lock_interruptible(&tty->atomic_read_lock))
+		if (mutex_lock_interruptible(&ldata->atomic_read_lock))
 			return -ERESTARTSYS;
 	}
 	packet = tty->packet;
@@ -1830,7 +1884,6 @@ do_it_again:
 			/* FIXME: does n_tty_set_room need locking ? */
 			n_tty_set_room(tty);
 			timeout = schedule_timeout(timeout);
-			BUG_ON(!tty->read_buf);
 			continue;
 		}
 		__set_current_state(TASK_RUNNING);
@@ -1845,45 +1898,45 @@ do_it_again:
 			nr--;
 		}
 
-		if (tty->icanon && !L_EXTPROC(tty)) {
+		if (ldata->icanon && !L_EXTPROC(tty)) {
 			/* N.B. avoid overrun if nr == 0 */
-			spin_lock_irqsave(&tty->read_lock, flags);
-			while (nr && tty->read_cnt) {
+			spin_lock_irqsave(&ldata->read_lock, flags);
+			while (nr && ldata->read_cnt) {
 				int eol;
 
-				eol = test_and_clear_bit(tty->read_tail,
-						tty->read_flags);
-				c = tty->read_buf[tty->read_tail];
-				tty->read_tail = ((tty->read_tail+1) &
+				eol = test_and_clear_bit(ldata->read_tail,
+						ldata->read_flags);
+				c = ldata->read_buf[ldata->read_tail];
+				ldata->read_tail = ((ldata->read_tail+1) &
 						  (N_TTY_BUF_SIZE-1));
-				tty->read_cnt--;
+				ldata->read_cnt--;
 				if (eol) {
 					/* this test should be redundant:
 					 * we shouldn't be reading data if
 					 * canon_data is 0
 					 */
-					if (--tty->canon_data < 0)
-						tty->canon_data = 0;
+					if (--ldata->canon_data < 0)
+						ldata->canon_data = 0;
 				}
-				spin_unlock_irqrestore(&tty->read_lock, flags);
+				spin_unlock_irqrestore(&ldata->read_lock, flags);
 
 				if (!eol || (c != __DISABLED_CHAR)) {
 					if (tty_put_user(tty, c, b++)) {
 						retval = -EFAULT;
 						b--;
-						spin_lock_irqsave(&tty->read_lock, flags);
+						spin_lock_irqsave(&ldata->read_lock, flags);
 						break;
 					}
 					nr--;
 				}
 				if (eol) {
 					tty_audit_push(tty);
-					spin_lock_irqsave(&tty->read_lock, flags);
+					spin_lock_irqsave(&ldata->read_lock, flags);
 					break;
 				}
-				spin_lock_irqsave(&tty->read_lock, flags);
+				spin_lock_irqsave(&ldata->read_lock, flags);
 			}
-			spin_unlock_irqrestore(&tty->read_lock, flags);
+			spin_unlock_irqrestore(&ldata->read_lock, flags);
 			if (retval)
 				break;
 		} else {
@@ -1915,7 +1968,7 @@ do_it_again:
 		if (time)
 			timeout = time;
 	}
-	mutex_unlock(&tty->atomic_read_lock);
+	mutex_unlock(&ldata->atomic_read_lock);
 	remove_wait_queue(&tty->read_wait, &wait);
 
 	if (!waitqueue_active(&tty->read_wait))
@@ -2076,19 +2129,19 @@ static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file,
 	return mask;
 }
 
-static unsigned long inq_canon(struct tty_struct *tty)
+static unsigned long inq_canon(struct n_tty_data *ldata)
 {
 	int nr, head, tail;
 
-	if (!tty->canon_data)
+	if (!ldata->canon_data)
 		return 0;
-	head = tty->canon_head;
-	tail = tty->read_tail;
+	head = ldata->canon_head;
+	tail = ldata->read_tail;
 	nr = (head - tail) & (N_TTY_BUF_SIZE-1);
 	/* Skip EOF-chars.. */
 	while (head != tail) {
-		if (test_bit(tail, tty->read_flags) &&
-		    tty->read_buf[tail] == __DISABLED_CHAR)
+		if (test_bit(tail, ldata->read_flags) &&
+		    ldata->read_buf[tail] == __DISABLED_CHAR)
 			nr--;
 		tail = (tail+1) & (N_TTY_BUF_SIZE-1);
 	}
@@ -2098,6 +2151,7 @@ static unsigned long inq_canon(struct tty_struct *tty)
 static int n_tty_ioctl(struct tty_struct *tty, struct file *file,
 		       unsigned int cmd, unsigned long arg)
 {
+	struct n_tty_data *ldata = tty->disc_data;
 	int retval;
 
 	switch (cmd) {
@@ -2105,9 +2159,9 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file,
 		return put_user(tty_chars_in_buffer(tty), (int __user *) arg);
 	case TIOCINQ:
 		/* FIXME: Locking */
-		retval = tty->read_cnt;
+		retval = ldata->read_cnt;
 		if (L_ICANON(tty))
-			retval = inq_canon(tty);
+			retval = inq_canon(ldata);
 		return put_user(retval, (unsigned int __user *) arg);
 	default:
 		return n_tty_ioctl_helper(tty, file, cmd, arg);
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index b917c942495..a0c69ab0439 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -400,7 +400,7 @@ struct buffer {
 } __attribute__ ((packed));
 
 /*    Global variables */
-static const struct pci_device_id nozomi_pci_tbl[] __devinitconst = {
+static const struct pci_device_id nozomi_pci_tbl[] = {
 	{PCI_DEVICE(0x1931, 0x000c)},	/* Nozomi HSDPA */
 	{},
 };
@@ -1360,7 +1360,7 @@ static void remove_sysfs_files(struct nozomi *dc)
 }
 
 /* Allocate memory for one device */
-static int __devinit nozomi_card_init(struct pci_dev *pdev,
+static int nozomi_card_init(struct pci_dev *pdev,
 				      const struct pci_device_id *ent)
 {
 	resource_size_t start;
@@ -1479,6 +1479,7 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev,
 		if (IS_ERR(tty_dev)) {
 			ret = PTR_ERR(tty_dev);
 			dev_err(&pdev->dev, "Could not allocate tty?\n");
+			tty_port_destroy(&port->port);
 			goto err_free_tty;
 		}
 	}
@@ -1486,8 +1487,10 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev,
 	return 0;
 
 err_free_tty:
-	for (i = dc->index_start; i < dc->index_start + MAX_PORT; ++i)
-		tty_unregister_device(ntty_driver, i);
+	for (i = 0; i < MAX_PORT; ++i) {
+		tty_unregister_device(ntty_driver, dc->index_start + i);
+		tty_port_destroy(&dc->port[i].port);
+	}
 err_free_kfifo:
 	for (i = 0; i < MAX_PORT; i++)
 		kfifo_free(&dc->port[i].fifo_ul);
@@ -1504,7 +1507,7 @@ err:
 	return ret;
 }
 
-static void __devexit tty_exit(struct nozomi *dc)
+static void tty_exit(struct nozomi *dc)
 {
 	unsigned int i;
 
@@ -1520,12 +1523,14 @@ static void __devexit tty_exit(struct nozomi *dc)
 	   complete off a hangup method ? */
 	while (dc->open_ttys)
 		msleep(1);
-	for (i = dc->index_start; i < dc->index_start + MAX_PORT; ++i)
-		tty_unregister_device(ntty_driver, i);
+	for (i = 0; i < MAX_PORT; ++i) {
+		tty_unregister_device(ntty_driver, dc->index_start + i);
+		tty_port_destroy(&dc->port[i].port);
+	}
 }
 
 /* Deallocate memory for one device */
-static void __devexit nozomi_card_exit(struct pci_dev *pdev)
+static void nozomi_card_exit(struct pci_dev *pdev)
 {
 	int i;
 	struct ctrl_ul ctrl;
@@ -1903,7 +1908,7 @@ static struct pci_driver nozomi_driver = {
 	.name = NOZOMI_NAME,
 	.id_table = nozomi_pci_tbl,
 	.probe = nozomi_card_init,
-	.remove = __devexit_p(nozomi_card_exit),
+	.remove = nozomi_card_exit,
 };
 
 static __init int nozomi_init(void)
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index a82b39939a9..be6a373601b 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -4,9 +4,6 @@
  *  Added support for a Unix98-style ptmx device.
  *    -- C. Scott Ananian <cananian@alumni.princeton.edu>, 14-Jan-1998
  *
- *  When reading this code see also fs/devpts. In particular note that the
- *  driver_data field is used by the devpts side as a binding to the devpts
- *  inode.
  */
 
 #include <linux/module.h>
@@ -59,7 +56,7 @@ static void pty_close(struct tty_struct *tty, struct file *filp)
 #ifdef CONFIG_UNIX98_PTYS
 		if (tty->driver == ptm_driver) {
 		        mutex_lock(&devpts_mutex);
-			devpts_pty_kill(tty->link);
+			devpts_pty_kill(tty->link->driver_data);
 		        mutex_unlock(&devpts_mutex);
 		}
 #endif
@@ -96,7 +93,7 @@ static void pty_unthrottle(struct tty_struct *tty)
 
 static int pty_space(struct tty_struct *to)
 {
-	int n = 8192 - to->buf.memory_used;
+	int n = 8192 - to->port->buf.memory_used;
 	if (n < 0)
 		return 0;
 	return n;
@@ -174,6 +171,41 @@ static int pty_set_lock(struct tty_struct *tty, int __user *arg)
 	return 0;
 }
 
+static int pty_get_lock(struct tty_struct *tty, int __user *arg)
+{
+	int locked = test_bit(TTY_PTY_LOCK, &tty->flags);
+	return put_user(locked, arg);
+}
+
+/* Set the packet mode on a pty */
+static int pty_set_pktmode(struct tty_struct *tty, int __user *arg)
+{
+	unsigned long flags;
+	int pktmode;
+
+	if (get_user(pktmode, arg))
+		return -EFAULT;
+
+	spin_lock_irqsave(&tty->ctrl_lock, flags);
+	if (pktmode) {
+		if (!tty->packet) {
+			tty->packet = 1;
+			tty->link->ctrl_status = 0;
+		}
+	} else
+		tty->packet = 0;
+	spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+
+	return 0;
+}
+
+/* Get the packet mode of a pty */
+static int pty_get_pktmode(struct tty_struct *tty, int __user *arg)
+{
+	int pktmode = tty->packet;
+	return put_user(pktmode, arg);
+}
+
 /* Send a signal to the slave */
 static int pty_signal(struct tty_struct *tty, int sig)
 {
@@ -245,7 +277,7 @@ static void pty_set_termios(struct tty_struct *tty,
  *	peform a terminal resize correctly
  */
 
-int pty_resize(struct tty_struct *tty,  struct winsize *ws)
+static int pty_resize(struct tty_struct *tty,  struct winsize *ws)
 {
 	struct pid *pgrp, *rpgrp;
 	unsigned long flags;
@@ -348,6 +380,7 @@ static int pty_common_install(struct tty_driver *driver, struct tty_struct *tty,
 	tty_port_init(ports[1]);
 	o_tty->port = ports[0];
 	tty->port = ports[1];
+	o_tty->port->itty = o_tty;
 
 	tty_driver_kref_get(driver);
 	tty->count++;
@@ -366,9 +399,16 @@ err:
 	return retval;
 }
 
+/* this is called once with whichever end is closed last */
+static void pty_unix98_shutdown(struct tty_struct *tty)
+{
+	devpts_kill_index(tty->driver_data, tty->index);
+}
+
 static void pty_cleanup(struct tty_struct *tty)
 {
-	kfree(tty->port);
+	tty->port->itty = NULL;
+	tty_port_put(tty->port);
 }
 
 /* Traditional BSD devices */
@@ -393,6 +433,12 @@ static int pty_bsd_ioctl(struct tty_struct *tty,
 	switch (cmd) {
 	case TIOCSPTLCK: /* Set PT Lock (disallow slave open) */
 		return pty_set_lock(tty, (int __user *) arg);
+	case TIOCGPTLCK: /* Get PT Lock status */
+		return pty_get_lock(tty, (int __user *)arg);
+	case TIOCPKT: /* Set PT packet mode */
+		return pty_set_pktmode(tty, (int __user *)arg);
+	case TIOCGPKT: /* Get PT packet mode */
+		return pty_get_pktmode(tty, (int __user *)arg);
 	case TIOCSIG:    /* Send signal to other side of pty */
 		return pty_signal(tty, (int) arg);
 	}
@@ -507,6 +553,12 @@ static int pty_unix98_ioctl(struct tty_struct *tty,
 	switch (cmd) {
 	case TIOCSPTLCK: /* Set PT Lock (disallow slave open) */
 		return pty_set_lock(tty, (int __user *)arg);
+	case TIOCGPTLCK: /* Get PT Lock status */
+		return pty_get_lock(tty, (int __user *)arg);
+	case TIOCPKT: /* Set PT packet mode */
+		return pty_set_pktmode(tty, (int __user *)arg);
+	case TIOCGPKT: /* Get PT packet mode */
+		return pty_get_pktmode(tty, (int __user *)arg);
 	case TIOCGPTN: /* Get PT Number */
 		return put_user(tty->index, (unsigned int __user *)arg);
 	case TIOCSIG:    /* Send signal to other side of pty */
@@ -547,7 +599,7 @@ static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver,
 	struct tty_struct *tty;
 
 	mutex_lock(&devpts_mutex);
-	tty = devpts_get_tty(pts_inode, idx);
+	tty = devpts_get_priv(pts_inode);
 	mutex_unlock(&devpts_mutex);
 	/* Master must be open before slave */
 	if (!tty)
@@ -581,6 +633,7 @@ static const struct tty_operations ptm_unix98_ops = {
 	.set_termios = pty_set_termios,
 	.ioctl = pty_unix98_ioctl,
 	.resize = pty_resize,
+	.shutdown = pty_unix98_shutdown,
 	.cleanup = pty_cleanup
 };
 
@@ -596,6 +649,7 @@ static const struct tty_operations pty_unix98_ops = {
 	.chars_in_buffer = pty_chars_in_buffer,
 	.unthrottle = pty_unthrottle,
 	.set_termios = pty_set_termios,
+	.shutdown = pty_unix98_shutdown,
 	.cleanup = pty_cleanup,
 };
 
@@ -614,6 +668,7 @@ static const struct tty_operations pty_unix98_ops = {
 static int ptmx_open(struct inode *inode, struct file *filp)
 {
 	struct tty_struct *tty;
+	struct inode *slave_inode;
 	int retval;
 	int index;
 
@@ -650,15 +705,21 @@ static int ptmx_open(struct inode *inode, struct file *filp)
 
 	tty_add_file(tty, filp);
 
-	retval = devpts_pty_new(inode, tty->link);
-	if (retval)
+	slave_inode = devpts_pty_new(inode,
+			MKDEV(UNIX98_PTY_SLAVE_MAJOR, index), index,
+			tty->link);
+	if (IS_ERR(slave_inode)) {
+		retval = PTR_ERR(slave_inode);
 		goto err_release;
+	}
 
 	retval = ptm_driver->ops->open(tty, filp);
 	if (retval)
 		goto err_release;
 
 	tty_unlock(tty);
+	tty->driver_data = inode;
+	tty->link->driver_data = slave_inode;
 	return 0;
 err_release:
 	tty_unlock(tty);
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index 9700d34b20a..e42009a0052 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -673,6 +673,7 @@ static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev)
 	if (sInitChan(ctlp, &info->channel, aiop, chan) == 0) {
 		printk(KERN_ERR "RocketPort sInitChan(%d, %d, %d) failed!\n",
 				board, aiop, chan);
+		tty_port_destroy(&info->port);
 		kfree(info);
 		return;
 	}
@@ -1757,7 +1758,7 @@ static void rp_flush_buffer(struct tty_struct *tty)
 
 #ifdef CONFIG_PCI
 
-static struct pci_device_id __devinitdata __used rocket_pci_ids[] = {
+static struct pci_device_id __used rocket_pci_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_ANY_ID) },
 	{ }
 };
@@ -2357,6 +2358,7 @@ static void rp_cleanup_module(void)
 	for (i = 0; i < MAX_RP_PORTS; i++)
 		if (rp_table[i]) {
 			tty_unregister_device(rocket_driver, i);
+			tty_port_destroy(&rp_table[i]->port);
 			kfree(rp_table[i]);
 		}
 
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index 66c38a3f74c..f99a84526f8 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -1225,6 +1225,8 @@ rs68328_init(void)
 
 	if (tty_register_driver(serial_driver)) {
 		put_tty_driver(serial_driver);
+		for (i = 0; i < NR_PORTS; i++)
+			tty_port_destroy(&m68k_soft[i].tport);
 		printk(KERN_ERR "Couldn't register serial driver\n");
 		return -ENOMEM;
 	}
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 3ba4234592b..d085e3a8ec0 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -280,7 +280,17 @@ static const struct serial8250_config uart_config[] = {
 		.fifo_size	= 64,
 		.tx_loadsz	= 64,
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
-		.flags		= UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR,
+		.flags		= UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR |
+				  UART_CAP_SLEEP,
+	},
+	[PORT_XR17V35X] = {
+		.name		= "XR17V35X",
+		.fifo_size	= 256,
+		.tx_loadsz	= 256,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11 |
+				  UART_FCR_T_TRIG_11,
+		.flags		= UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR |
+				  UART_CAP_SLEEP,
 	},
 	[PORT_LPC3220] = {
 		.name		= "LPC3220",
@@ -455,6 +465,7 @@ static void io_serial_out(struct uart_port *p, int offset, int value)
 }
 
 static int serial8250_default_handle_irq(struct uart_port *port);
+static int exar_handle_irq(struct uart_port *port);
 
 static void set_io_from_upio(struct uart_port *p)
 {
@@ -574,6 +585,19 @@ EXPORT_SYMBOL_GPL(serial8250_clear_and_reinit_fifos);
  */
 static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
 {
+	/*
+	 * Exar UARTs have a SLEEP register that enables or disables
+	 * each UART to enter sleep mode separately.  On the XR17V35x the
+	 * register is accessible to each UART at the UART_EXAR_SLEEP
+	 * offset but the UART channel may only write to the corresponding
+	 * bit.
+	 */
+	if ((p->port.type == PORT_XR17V35X) ||
+	   (p->port.type == PORT_XR17D15X)) {
+		serial_out(p, UART_EXAR_SLEEP, 0xff);
+		return;
+	}
+
 	if (p->capabilities & UART_CAP_SLEEP) {
 		if (p->capabilities & UART_CAP_EFR) {
 			serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B);
@@ -882,6 +906,27 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 	up->capabilities |= UART_CAP_FIFO;
 
 	/*
+	 * XR17V35x UARTs have an extra divisor register, DLD
+	 * that gets enabled with when DLAB is set which will
+	 * cause the device to incorrectly match and assign
+	 * port type to PORT_16650.  The EFR for this UART is
+	 * found at offset 0x09. Instead check the Deice ID (DVID)
+	 * register for a 2, 4 or 8 port UART.
+	 */
+	if (up->port.flags & UPF_EXAR_EFR) {
+		status1 = serial_in(up, UART_EXAR_DVID);
+		if (status1 == 0x82 || status1 == 0x84 || status1 == 0x88) {
+			DEBUG_AUTOCONF("Exar XR17V35x ");
+			up->port.type = PORT_XR17V35X;
+			up->capabilities |= UART_CAP_AFE | UART_CAP_EFR |
+						UART_CAP_SLEEP;
+
+			return;
+		}
+
+	}
+
+	/*
 	 * Check for presence of the EFR when DLAB is set.
 	 * Only ST16C650V1 UARTs pass this test.
 	 */
@@ -1013,8 +1058,12 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 	 * Exar uarts have EFR in a weird location
 	 */
 	if (up->port.flags & UPF_EXAR_EFR) {
+		DEBUG_AUTOCONF("Exar XR17D15x ");
 		up->port.type = PORT_XR17D15X;
-		up->capabilities |= UART_CAP_AFE | UART_CAP_EFR;
+		up->capabilities |= UART_CAP_AFE | UART_CAP_EFR |
+				    UART_CAP_SLEEP;
+
+		return;
 	}
 
 	/*
@@ -1516,6 +1565,31 @@ static int serial8250_default_handle_irq(struct uart_port *port)
 }
 
 /*
+ * These Exar UARTs have an extra interrupt indicator that could
+ * fire for a few unimplemented interrupts.  One of which is a
+ * wakeup event when coming out of sleep.  Put this here just
+ * to be on the safe side that these interrupts don't go unhandled.
+ */
+static int exar_handle_irq(struct uart_port *port)
+{
+	unsigned char int0, int1, int2, int3;
+	unsigned int iir = serial_port_in(port, UART_IIR);
+	int ret;
+
+	ret = serial8250_handle_irq(port, iir);
+
+	if ((port->type == PORT_XR17V35X) ||
+	   (port->type == PORT_XR17D15X)) {
+		int0 = serial_port_in(port, 0x80);
+		int1 = serial_port_in(port, 0x81);
+		int2 = serial_port_in(port, 0x82);
+		int3 = serial_port_in(port, 0x83);
+	}
+
+	return ret;
+}
+
+/*
  * This is the serial driver's interrupt routine.
  *
  * Arjan thinks the old way was overly complex, so it got simplified.
@@ -2349,16 +2423,14 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 			serial_port_out(port, UART_EFR, efr);
 	}
 
-#ifdef CONFIG_ARCH_OMAP1
 	/* Workaround to enable 115200 baud on OMAP1510 internal ports */
-	if (cpu_is_omap1510() && is_omap_port(up)) {
+	if (is_omap1510_8250(up)) {
 		if (baud == 115200) {
 			quot = 1;
 			serial_port_out(port, UART_OMAP_OSC_12M_SEL, 1);
 		} else
 			serial_port_out(port, UART_OMAP_OSC_12M_SEL, 0);
 	}
-#endif
 
 	/*
 	 * For NatSemi, switch to bank 2 not bank 1, to avoid resetting EXCR2,
@@ -2439,10 +2511,9 @@ static unsigned int serial8250_port_size(struct uart_8250_port *pt)
 {
 	if (pt->port.iotype == UPIO_AU)
 		return 0x1000;
-#ifdef CONFIG_ARCH_OMAP1
-	if (is_omap_port(pt))
+	if (is_omap1_8250(pt))
 		return 0x16 << pt->port.regshift;
-#endif
+
 	return 8 << pt->port.regshift;
 }
 
@@ -2617,6 +2688,11 @@ static void serial8250_config_port(struct uart_port *port, int flags)
 		serial8250_release_rsa_resource(up);
 	if (port->type == PORT_UNKNOWN)
 		serial8250_release_std_resource(up);
+
+	/* Fixme: probably not the best place for this */
+	if ((port->type == PORT_XR17V35X) ||
+	   (port->type == PORT_XR17D15X))
+		port->handle_irq = exar_handle_irq;
 }
 
 static int
@@ -2992,7 +3068,7 @@ void serial8250_resume_port(int line)
  * list is terminated with a zero flags entry, which means we expect
  * all entries to have at least UPF_BOOT_AUTOCONF set.
  */
-static int __devinit serial8250_probe(struct platform_device *dev)
+static int serial8250_probe(struct platform_device *dev)
 {
 	struct plat_serial8250_port *p = dev->dev.platform_data;
 	struct uart_8250_port uart;
@@ -3038,7 +3114,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
 /*
  * Remove serial ports registered against a platform device.
  */
-static int __devexit serial8250_remove(struct platform_device *dev)
+static int serial8250_remove(struct platform_device *dev)
 {
 	int i;
 
@@ -3081,7 +3157,7 @@ static int serial8250_resume(struct platform_device *dev)
 
 static struct platform_driver serial8250_isa_driver = {
 	.probe		= serial8250_probe,
-	.remove		= __devexit_p(serial8250_remove),
+	.remove		= serial8250_remove,
 	.suspend	= serial8250_suspend,
 	.resume		= serial8250_resume,
 	.driver		= {
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 5a76f9c8d36..3b4ea84898c 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -106,3 +106,39 @@ static inline int serial8250_pnp_init(void) { return 0; }
 static inline void serial8250_pnp_exit(void) { }
 #endif
 
+#ifdef CONFIG_ARCH_OMAP1
+static inline int is_omap1_8250(struct uart_8250_port *pt)
+{
+	int res;
+
+	switch (pt->port.mapbase) {
+	case OMAP1_UART1_BASE:
+	case OMAP1_UART2_BASE:
+	case OMAP1_UART3_BASE:
+		res = 1;
+		break;
+	default:
+		res = 0;
+		break;
+	}
+
+	return res;
+}
+
+static inline int is_omap1510_8250(struct uart_8250_port *pt)
+{
+	if (!cpu_is_omap1510())
+		return 0;
+
+	return is_omap1_8250(pt);
+}
+#else
+static inline int is_omap1_8250(struct uart_8250_port *pt)
+{
+	return 0;
+}
+static inline int is_omap1510_8250(struct uart_8250_port *pt)
+{
+	return 0;
+}
+#endif
diff --git a/drivers/tty/serial/8250/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c
index 857498312a9..549aa07c0d2 100644
--- a/drivers/tty/serial/8250/8250_acorn.c
+++ b/drivers/tty/serial/8250/8250_acorn.c
@@ -38,7 +38,7 @@ struct serial_card_info {
 	void __iomem *vaddr;
 };
 
-static int __devinit
+static int
 serial_card_probe(struct expansion_card *ec, const struct ecard_id *id)
 {
 	struct serial_card_info *info;
@@ -80,7 +80,7 @@ serial_card_probe(struct expansion_card *ec, const struct ecard_id *id)
 	return 0;
 }
 
-static void __devexit serial_card_remove(struct expansion_card *ec)
+static void serial_card_remove(struct expansion_card *ec)
 {
 	struct serial_card_info *info = ecard_get_drvdata(ec);
 	int i;
@@ -116,7 +116,7 @@ static const struct ecard_id serial_cids[] = {
 
 static struct ecard_driver serial_card_driver = {
 	.probe		= serial_card_probe,
-	.remove 	= __devexit_p(serial_card_remove),
+	.remove		= serial_card_remove,
 	.id_table	= serial_cids,
 	.drv = {
 		.name	= "8250_acorn",
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index c3b2ec0c8c0..1d0dba2d562 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -87,7 +87,7 @@ static int dw8250_handle_irq(struct uart_port *p)
 	return 0;
 }
 
-static int __devinit dw8250_probe(struct platform_device *pdev)
+static int dw8250_probe(struct platform_device *pdev)
 {
 	struct uart_8250_port uart = {};
 	struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -152,7 +152,7 @@ static int __devinit dw8250_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit dw8250_remove(struct platform_device *pdev)
+static int dw8250_remove(struct platform_device *pdev)
 {
 	struct dw8250_data *data = platform_get_drvdata(pdev);
 
@@ -161,6 +161,29 @@ static int __devexit dw8250_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int dw8250_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct dw8250_data *data = platform_get_drvdata(pdev);
+
+	serial8250_suspend_port(data->line);
+
+	return 0;
+}
+
+static int dw8250_resume(struct platform_device *pdev)
+{
+	struct dw8250_data *data = platform_get_drvdata(pdev);
+
+	serial8250_resume_port(data->line);
+
+	return 0;
+}
+#else
+#define dw8250_suspend NULL
+#define dw8250_resume NULL
+#endif /* CONFIG_PM */
+
 static const struct of_device_id dw8250_match[] = {
 	{ .compatible = "snps,dw-apb-uart" },
 	{ /* Sentinel */ }
@@ -174,7 +197,9 @@ static struct platform_driver dw8250_platform_driver = {
 		.of_match_table	= dw8250_match,
 	},
 	.probe			= dw8250_probe,
-	.remove			= __devexit_p(dw8250_remove),
+	.remove			= dw8250_remove,
+	.suspend		= dw8250_suspend,
+	.resume			= dw8250_resume,
 };
 
 module_platform_driver(dw8250_platform_driver);
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index eaafb98debe..f53a7db4350 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -48,7 +48,7 @@ struct early_serial8250_device {
 
 static struct early_serial8250_device early_device;
 
-static unsigned int __init serial_in(struct uart_port *port, int offset)
+unsigned int __weak __init serial8250_early_in(struct uart_port *port, int offset)
 {
 	switch (port->iotype) {
 	case UPIO_MEM:
@@ -62,7 +62,7 @@ static unsigned int __init serial_in(struct uart_port *port, int offset)
 	}
 }
 
-static void __init serial_out(struct uart_port *port, int offset, int value)
+void __weak __init serial8250_early_out(struct uart_port *port, int offset, int value)
 {
 	switch (port->iotype) {
 	case UPIO_MEM:
@@ -84,7 +84,7 @@ static void __init wait_for_xmitr(struct uart_port *port)
 	unsigned int status;
 
 	for (;;) {
-		status = serial_in(port, UART_LSR);
+		status = serial8250_early_in(port, UART_LSR);
 		if ((status & BOTH_EMPTY) == BOTH_EMPTY)
 			return;
 		cpu_relax();
@@ -94,7 +94,7 @@ static void __init wait_for_xmitr(struct uart_port *port)
 static void __init serial_putc(struct uart_port *port, int c)
 {
 	wait_for_xmitr(port);
-	serial_out(port, UART_TX, c);
+	serial8250_early_out(port, UART_TX, c);
 }
 
 static void __init early_serial8250_write(struct console *console,
@@ -104,14 +104,14 @@ static void __init early_serial8250_write(struct console *console,
 	unsigned int ier;
 
 	/* Save the IER and disable interrupts */
-	ier = serial_in(port, UART_IER);
-	serial_out(port, UART_IER, 0);
+	ier = serial8250_early_in(port, UART_IER);
+	serial8250_early_out(port, UART_IER, 0);
 
 	uart_console_write(port, s, count, serial_putc);
 
 	/* Wait for transmitter to become empty and restore the IER */
 	wait_for_xmitr(port);
-	serial_out(port, UART_IER, ier);
+	serial8250_early_out(port, UART_IER, ier);
 }
 
 static unsigned int __init probe_baud(struct uart_port *port)
@@ -119,11 +119,11 @@ static unsigned int __init probe_baud(struct uart_port *port)
 	unsigned char lcr, dll, dlm;
 	unsigned int quot;
 
-	lcr = serial_in(port, UART_LCR);
-	serial_out(port, UART_LCR, lcr | UART_LCR_DLAB);
-	dll = serial_in(port, UART_DLL);
-	dlm = serial_in(port, UART_DLM);
-	serial_out(port, UART_LCR, lcr);
+	lcr = serial8250_early_in(port, UART_LCR);
+	serial8250_early_out(port, UART_LCR, lcr | UART_LCR_DLAB);
+	dll = serial8250_early_in(port, UART_DLL);
+	dlm = serial8250_early_in(port, UART_DLM);
+	serial8250_early_out(port, UART_LCR, lcr);
 
 	quot = (dlm << 8) | dll;
 	return (port->uartclk / 16) / quot;
@@ -135,17 +135,17 @@ static void __init init_port(struct early_serial8250_device *device)
 	unsigned int divisor;
 	unsigned char c;
 
-	serial_out(port, UART_LCR, 0x3);	/* 8n1 */
-	serial_out(port, UART_IER, 0);		/* no interrupt */
-	serial_out(port, UART_FCR, 0);		/* no fifo */
-	serial_out(port, UART_MCR, 0x3);	/* DTR + RTS */
-
-	divisor = port->uartclk / (16 * device->baud);
-	c = serial_in(port, UART_LCR);
-	serial_out(port, UART_LCR, c | UART_LCR_DLAB);
-	serial_out(port, UART_DLL, divisor & 0xff);
-	serial_out(port, UART_DLM, (divisor >> 8) & 0xff);
-	serial_out(port, UART_LCR, c & ~UART_LCR_DLAB);
+	serial8250_early_out(port, UART_LCR, 0x3);	/* 8n1 */
+	serial8250_early_out(port, UART_IER, 0);	/* no interrupt */
+	serial8250_early_out(port, UART_FCR, 0);	/* no fifo */
+	serial8250_early_out(port, UART_MCR, 0x3);	/* DTR + RTS */
+
+	divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud);
+	c = serial8250_early_in(port, UART_LCR);
+	serial8250_early_out(port, UART_LCR, c | UART_LCR_DLAB);
+	serial8250_early_out(port, UART_DLL, divisor & 0xff);
+	serial8250_early_out(port, UART_DLM, (divisor >> 8) & 0xff);
+	serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB);
 }
 
 static int __init parse_options(struct early_serial8250_device *device,
diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c
index 3a0363e7f3a..916cc19fbbd 100644
--- a/drivers/tty/serial/8250/8250_em.c
+++ b/drivers/tty/serial/8250/8250_em.c
@@ -89,7 +89,7 @@ static void serial8250_em_serial_dl_write(struct uart_8250_port *up, int value)
 	serial_out(up, UART_DLM_EM, value >> 8 & 0xff);
 }
 
-static int __devinit serial8250_em_probe(struct platform_device *pdev)
+static int serial8250_em_probe(struct platform_device *pdev)
 {
 	struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
@@ -152,7 +152,7 @@ static int __devinit serial8250_em_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int __devexit serial8250_em_remove(struct platform_device *pdev)
+static int serial8250_em_remove(struct platform_device *pdev)
 {
 	struct serial8250_em_priv *priv = platform_get_drvdata(pdev);
 
@@ -163,7 +163,7 @@ static int __devexit serial8250_em_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id serial8250_em_dt_ids[] __devinitconst = {
+static const struct of_device_id serial8250_em_dt_ids[] = {
 	{ .compatible = "renesas,em-uart", },
 	{},
 };
@@ -176,7 +176,7 @@ static struct platform_driver serial8250_em_platform_driver = {
 		.owner		= THIS_MODULE,
 	},
 	.probe			= serial8250_em_probe,
-	.remove			= __devexit_p(serial8250_em_remove),
+	.remove			= serial8250_em_remove,
 };
 
 module_platform_driver(serial8250_em_platform_driver);
diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c
index f3d0edf4664..5bdaf271d39 100644
--- a/drivers/tty/serial/8250/8250_hp300.c
+++ b/drivers/tty/serial/8250/8250_hp300.c
@@ -36,9 +36,9 @@ static struct hp300_port *hp300_ports;
 
 #ifdef CONFIG_HPDCA
 
-static int __devinit hpdca_init_one(struct dio_dev *d,
+static int hpdca_init_one(struct dio_dev *d,
 					const struct dio_device_id *ent);
-static void __devexit hpdca_remove_one(struct dio_dev *d);
+static void hpdca_remove_one(struct dio_dev *d);
 
 static struct dio_device_id hpdca_dio_tbl[] = {
 	{ DIO_ID_DCA0 },
@@ -52,7 +52,7 @@ static struct dio_driver hpdca_driver = {
 	.name      = "hpdca",
 	.id_table  = hpdca_dio_tbl,
 	.probe     = hpdca_init_one,
-	.remove    = __devexit_p(hpdca_remove_one),
+	.remove    = hpdca_remove_one,
 };
 
 #endif
@@ -159,7 +159,7 @@ int __init hp300_setup_serial_console(void)
 #endif /* CONFIG_SERIAL_8250_CONSOLE */
 
 #ifdef CONFIG_HPDCA
-static int __devinit hpdca_init_one(struct dio_dev *d,
+static int hpdca_init_one(struct dio_dev *d,
 				const struct dio_device_id *ent)
 {
 	struct uart_8250_port uart;
@@ -288,7 +288,7 @@ static int __init hp300_8250_init(void)
 }
 
 #ifdef CONFIG_HPDCA
-static void __devexit hpdca_remove_one(struct dio_dev *d)
+static void hpdca_remove_one(struct dio_dev *d)
 {
 	int line;
 
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 17b7d26abf4..26b9dc012ed 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -288,7 +288,7 @@ static int pci_plx9050_init(struct pci_dev *dev)
 	return 0;
 }
 
-static void __devexit pci_plx9050_exit(struct pci_dev *dev)
+static void pci_plx9050_exit(struct pci_dev *dev)
 {
 	u8 __iomem *p;
 
@@ -313,7 +313,7 @@ static void __devexit pci_plx9050_exit(struct pci_dev *dev)
 #define NI8420_INT_ENABLE_REG	0x38
 #define NI8420_INT_ENABLE_BIT	0x2000
 
-static void __devexit pci_ni8420_exit(struct pci_dev *dev)
+static void pci_ni8420_exit(struct pci_dev *dev)
 {
 	void __iomem *p;
 	unsigned long base, len;
@@ -345,7 +345,7 @@ static void __devexit pci_ni8420_exit(struct pci_dev *dev)
 
 #define MITE_LCIMR2_CLR_CPU_IE	(1 << 30)
 
-static void __devexit pci_ni8430_exit(struct pci_dev *dev)
+static void pci_ni8430_exit(struct pci_dev *dev)
 {
 	void __iomem *p;
 	unsigned long base, len;
@@ -422,7 +422,7 @@ static int sbs_init(struct pci_dev *dev)
  * Disables the global interrupt of PMC-OctalPro
  */
 
-static void __devexit sbs_exit(struct pci_dev *dev)
+static void sbs_exit(struct pci_dev *dev)
 {
 	u8 __iomem *p;
 
@@ -991,7 +991,7 @@ static int pci_ite887x_init(struct pci_dev *dev)
 	return ret;
 }
 
-static void __devexit pci_ite887x_exit(struct pci_dev *dev)
+static void pci_ite887x_exit(struct pci_dev *dev)
 {
 	u32 ioport;
 	/* the ioport is bit 0-15 in POSIO0R */
@@ -1068,7 +1068,7 @@ ce4100_serial_setup(struct serial_private *priv,
 {
 	int ret;
 
-	ret = setup_port(priv, port, 0, 0, board->reg_shift);
+	ret = setup_port(priv, port, idx, 0, board->reg_shift);
 	port->port.iotype = UPIO_MEM32;
 	port->port.type = PORT_XSCALE;
 	port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
@@ -1165,6 +1165,94 @@ pci_xr17c154_setup(struct serial_private *priv,
 }
 
 static int
+pci_xr17v35x_setup(struct serial_private *priv,
+		  const struct pciserial_board *board,
+		  struct uart_8250_port *port, int idx)
+{
+	u8 __iomem *p;
+
+	p = pci_ioremap_bar(priv->dev, 0);
+	if (p == NULL)
+		return -ENOMEM;
+
+	port->port.flags |= UPF_EXAR_EFR;
+
+	/*
+	 * Setup Multipurpose Input/Output pins.
+	 */
+	if (idx == 0) {
+		writeb(0x00, p + 0x8f); /*MPIOINT[7:0]*/
+		writeb(0x00, p + 0x90); /*MPIOLVL[7:0]*/
+		writeb(0x00, p + 0x91); /*MPIO3T[7:0]*/
+		writeb(0x00, p + 0x92); /*MPIOINV[7:0]*/
+		writeb(0x00, p + 0x93); /*MPIOSEL[7:0]*/
+		writeb(0x00, p + 0x94); /*MPIOOD[7:0]*/
+		writeb(0x00, p + 0x95); /*MPIOINT[15:8]*/
+		writeb(0x00, p + 0x96); /*MPIOLVL[15:8]*/
+		writeb(0x00, p + 0x97); /*MPIO3T[15:8]*/
+		writeb(0x00, p + 0x98); /*MPIOINV[15:8]*/
+		writeb(0x00, p + 0x99); /*MPIOSEL[15:8]*/
+		writeb(0x00, p + 0x9a); /*MPIOOD[15:8]*/
+	}
+	writeb(0x00, p + UART_EXAR_8XMODE);
+	writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR);
+	writeb(128, p + UART_EXAR_TXTRG);
+	writeb(128, p + UART_EXAR_RXTRG);
+	iounmap(p);
+
+	return pci_default_setup(priv, board, port, idx);
+}
+
+#define PCI_DEVICE_ID_COMMTECH_4222PCI335 0x0004
+#define PCI_DEVICE_ID_COMMTECH_4224PCI335 0x0002
+#define PCI_DEVICE_ID_COMMTECH_2324PCI335 0x000a
+#define PCI_DEVICE_ID_COMMTECH_2328PCI335 0x000b
+
+static int
+pci_fastcom335_setup(struct serial_private *priv,
+		  const struct pciserial_board *board,
+		  struct uart_8250_port *port, int idx)
+{
+	u8 __iomem *p;
+
+	p = pci_ioremap_bar(priv->dev, 0);
+	if (p == NULL)
+		return -ENOMEM;
+
+	port->port.flags |= UPF_EXAR_EFR;
+
+	/*
+	 * Setup Multipurpose Input/Output pins.
+	 */
+	if (idx == 0) {
+		switch (priv->dev->device) {
+		case PCI_DEVICE_ID_COMMTECH_4222PCI335:
+		case PCI_DEVICE_ID_COMMTECH_4224PCI335:
+			writeb(0x78, p + 0x90); /* MPIOLVL[7:0] */
+			writeb(0x00, p + 0x92); /* MPIOINV[7:0] */
+			writeb(0x00, p + 0x93); /* MPIOSEL[7:0] */
+			break;
+		case PCI_DEVICE_ID_COMMTECH_2324PCI335:
+		case PCI_DEVICE_ID_COMMTECH_2328PCI335:
+			writeb(0x00, p + 0x90); /* MPIOLVL[7:0] */
+			writeb(0xc0, p + 0x92); /* MPIOINV[7:0] */
+			writeb(0xc0, p + 0x93); /* MPIOSEL[7:0] */
+			break;
+		}
+		writeb(0x00, p + 0x8f); /* MPIOINT[7:0] */
+		writeb(0x00, p + 0x91); /* MPIO3T[7:0] */
+		writeb(0x00, p + 0x94); /* MPIOOD[7:0] */
+	}
+	writeb(0x00, p + UART_EXAR_8XMODE);
+	writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR);
+	writeb(32, p + UART_EXAR_TXTRG);
+	writeb(32, p + UART_EXAR_RXTRG);
+	iounmap(p);
+
+	return pci_default_setup(priv, board, port, idx);
+}
+
+static int
 pci_wch_ch353_setup(struct serial_private *priv,
                     const struct pciserial_board *board,
                     struct uart_8250_port *port, int idx)
@@ -1213,6 +1301,10 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_VENDOR_ID_AGESTAR		0x5372
 #define PCI_DEVICE_ID_AGESTAR_9375	0x6872
 #define PCI_VENDOR_ID_ASIX		0x9710
+#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0019
+#define PCI_DEVICE_ID_COMMTECH_4224PCIE	0x0020
+#define PCI_DEVICE_ID_COMMTECH_4228PCIE	0x0021
+
 
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
@@ -1314,7 +1406,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.init		= pci_ite887x_init,
 		.setup		= pci_default_setup,
-		.exit		= __devexit_p(pci_ite887x_exit),
+		.exit		= pci_ite887x_exit,
 	},
 	/*
 	 * National Instruments
@@ -1326,7 +1418,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.init		= pci_ni8420_init,
 		.setup		= pci_default_setup,
-		.exit		= __devexit_p(pci_ni8420_exit),
+		.exit		= pci_ni8420_exit,
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_NI,
@@ -1335,7 +1427,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.init		= pci_ni8420_init,
 		.setup		= pci_default_setup,
-		.exit		= __devexit_p(pci_ni8420_exit),
+		.exit		= pci_ni8420_exit,
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_NI,
@@ -1344,7 +1436,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.init		= pci_ni8420_init,
 		.setup		= pci_default_setup,
-		.exit		= __devexit_p(pci_ni8420_exit),
+		.exit		= pci_ni8420_exit,
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_NI,
@@ -1353,7 +1445,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.init		= pci_ni8420_init,
 		.setup		= pci_default_setup,
-		.exit		= __devexit_p(pci_ni8420_exit),
+		.exit		= pci_ni8420_exit,
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_NI,
@@ -1362,7 +1454,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.init		= pci_ni8420_init,
 		.setup		= pci_default_setup,
-		.exit		= __devexit_p(pci_ni8420_exit),
+		.exit		= pci_ni8420_exit,
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_NI,
@@ -1371,7 +1463,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.init		= pci_ni8420_init,
 		.setup		= pci_default_setup,
-		.exit		= __devexit_p(pci_ni8420_exit),
+		.exit		= pci_ni8420_exit,
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_NI,
@@ -1380,7 +1472,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.init		= pci_ni8420_init,
 		.setup		= pci_default_setup,
-		.exit		= __devexit_p(pci_ni8420_exit),
+		.exit		= pci_ni8420_exit,
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_NI,
@@ -1389,7 +1481,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.init		= pci_ni8420_init,
 		.setup		= pci_default_setup,
-		.exit		= __devexit_p(pci_ni8420_exit),
+		.exit		= pci_ni8420_exit,
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_NI,
@@ -1398,7 +1490,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.init		= pci_ni8420_init,
 		.setup		= pci_default_setup,
-		.exit		= __devexit_p(pci_ni8420_exit),
+		.exit		= pci_ni8420_exit,
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_NI,
@@ -1407,7 +1499,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.init		= pci_ni8420_init,
 		.setup		= pci_default_setup,
-		.exit		= __devexit_p(pci_ni8420_exit),
+		.exit		= pci_ni8420_exit,
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_NI,
@@ -1416,7 +1508,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.init		= pci_ni8420_init,
 		.setup		= pci_default_setup,
-		.exit		= __devexit_p(pci_ni8420_exit),
+		.exit		= pci_ni8420_exit,
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_NI,
@@ -1425,7 +1517,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.init		= pci_ni8420_init,
 		.setup		= pci_default_setup,
-		.exit		= __devexit_p(pci_ni8420_exit),
+		.exit		= pci_ni8420_exit,
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_NI,
@@ -1434,7 +1526,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.init		= pci_ni8430_init,
 		.setup		= pci_ni8430_setup,
-		.exit		= __devexit_p(pci_ni8430_exit),
+		.exit		= pci_ni8430_exit,
 	},
 	/*
 	 * Panacom
@@ -1446,7 +1538,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.init		= pci_plx9050_init,
 		.setup		= pci_default_setup,
-		.exit		= __devexit_p(pci_plx9050_exit),
+		.exit		= pci_plx9050_exit,
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_PANACOM,
@@ -1455,7 +1547,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.init		= pci_plx9050_init,
 		.setup		= pci_default_setup,
-		.exit		= __devexit_p(pci_plx9050_exit),
+		.exit		= pci_plx9050_exit,
 	},
 	/*
 	 * PLX
@@ -1474,7 +1566,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_SUBDEVICE_ID_EXSYS_4055,
 		.init		= pci_plx9050_init,
 		.setup		= pci_default_setup,
-		.exit		= __devexit_p(pci_plx9050_exit),
+		.exit		= pci_plx9050_exit,
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_PLX,
@@ -1483,7 +1575,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_SUBDEVICE_ID_KEYSPAN_SX2,
 		.init		= pci_plx9050_init,
 		.setup		= pci_default_setup,
-		.exit		= __devexit_p(pci_plx9050_exit),
+		.exit		= pci_plx9050_exit,
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_PLX,
@@ -1492,7 +1584,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_SUBDEVICE_ID_UNKNOWN_0x1584,
 		.init		= pci_plx9050_init,
 		.setup		= pci_default_setup,
-		.exit		= __devexit_p(pci_plx9050_exit),
+		.exit		= pci_plx9050_exit,
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_PLX,
@@ -1501,7 +1593,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_DEVICE_ID_PLX_ROMULUS,
 		.init		= pci_plx9050_init,
 		.setup		= pci_default_setup,
-		.exit		= __devexit_p(pci_plx9050_exit),
+		.exit		= pci_plx9050_exit,
 	},
 	/*
 	 * SBS Technologies, Inc., PMC-OCTALPRO 232
@@ -1513,7 +1605,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_SUBDEVICE_ID_OCTPRO232,
 		.init		= sbs_init,
 		.setup		= sbs_setup,
-		.exit		= __devexit_p(sbs_exit),
+		.exit		= sbs_exit,
 	},
 	/*
 	 * SBS Technologies, Inc., PMC-OCTALPRO 422
@@ -1525,7 +1617,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_SUBDEVICE_ID_OCTPRO422,
 		.init		= sbs_init,
 		.setup		= sbs_setup,
-		.exit		= __devexit_p(sbs_exit),
+		.exit		= sbs_exit,
 	},
 	/*
 	 * SBS Technologies, Inc., P-Octal 232
@@ -1537,7 +1629,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_SUBDEVICE_ID_POCTAL232,
 		.init		= sbs_init,
 		.setup		= sbs_setup,
-		.exit		= __devexit_p(sbs_exit),
+		.exit		= sbs_exit,
 	},
 	/*
 	 * SBS Technologies, Inc., P-Octal 422
@@ -1549,7 +1641,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_SUBDEVICE_ID_POCTAL422,
 		.init		= sbs_init,
 		.setup		= sbs_setup,
-		.exit		= __devexit_p(sbs_exit),
+		.exit		= sbs_exit,
 	},
 	/*
 	 * SIIG cards - these may be called via parport_serial
@@ -1622,6 +1714,27 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.setup		= pci_xr17c154_setup,
 	},
+	{
+		.vendor = PCI_VENDOR_ID_EXAR,
+		.device = PCI_DEVICE_ID_EXAR_XR17V352,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_xr17v35x_setup,
+	},
+	{
+		.vendor = PCI_VENDOR_ID_EXAR,
+		.device = PCI_DEVICE_ID_EXAR_XR17V354,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_xr17v35x_setup,
+	},
+	{
+		.vendor = PCI_VENDOR_ID_EXAR,
+		.device = PCI_DEVICE_ID_EXAR_XR17V358,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_xr17v35x_setup,
+	},
 	/*
 	 * Xircom cards
 	 */
@@ -1788,6 +1901,59 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.setup		= pci_asix_setup,
 	},
 	/*
+	 * Commtech, Inc. Fastcom adapters
+	 *
+	 */
+	{
+		.vendor = PCI_VENDOR_ID_COMMTECH,
+		.device = PCI_DEVICE_ID_COMMTECH_4222PCI335,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_fastcom335_setup,
+	},
+	{
+		.vendor = PCI_VENDOR_ID_COMMTECH,
+		.device = PCI_DEVICE_ID_COMMTECH_4224PCI335,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_fastcom335_setup,
+	},
+	{
+		.vendor = PCI_VENDOR_ID_COMMTECH,
+		.device = PCI_DEVICE_ID_COMMTECH_2324PCI335,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_fastcom335_setup,
+	},
+	{
+		.vendor = PCI_VENDOR_ID_COMMTECH,
+		.device = PCI_DEVICE_ID_COMMTECH_2328PCI335,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_fastcom335_setup,
+	},
+	{
+		.vendor = PCI_VENDOR_ID_COMMTECH,
+		.device = PCI_DEVICE_ID_COMMTECH_4222PCIE,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_xr17v35x_setup,
+	},
+	{
+		.vendor = PCI_VENDOR_ID_COMMTECH,
+		.device = PCI_DEVICE_ID_COMMTECH_4224PCIE,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_xr17v35x_setup,
+	},
+	{
+		.vendor = PCI_VENDOR_ID_COMMTECH,
+		.device = PCI_DEVICE_ID_COMMTECH_4228PCIE,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_xr17v35x_setup,
+	},
+	/*
 	 * Default "match everything" terminator entry
 	 */
 	{
@@ -1863,6 +2029,10 @@ enum pci_board_num_t {
 
 	pbn_b0_4_1152000,
 
+	pbn_b0_2_1152000_200,
+	pbn_b0_4_1152000_200,
+	pbn_b0_8_1152000_200,
+
 	pbn_b0_2_1843200,
 	pbn_b0_4_1843200,
 
@@ -1962,6 +2132,9 @@ enum pci_board_num_t {
 	pbn_exar_XR17C152,
 	pbn_exar_XR17C154,
 	pbn_exar_XR17C158,
+	pbn_exar_XR17V352,
+	pbn_exar_XR17V354,
+	pbn_exar_XR17V358,
 	pbn_exar_ibm_saturn,
 	pbn_pasemi_1682M,
 	pbn_ni8430_2,
@@ -1987,7 +2160,7 @@ enum pci_board_num_t {
  * see first lines of serial_in() and serial_out() in 8250.c
 */
 
-static struct pciserial_board pci_boards[] __devinitdata = {
+static struct pciserial_board pci_boards[] = {
 	[pbn_default] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 1,
@@ -2057,6 +2230,27 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 		.uart_offset	= 8,
 	},
 
+	[pbn_b0_2_1152000_200] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 2,
+		.base_baud	= 1152000,
+		.uart_offset	= 0x200,
+	},
+
+	[pbn_b0_4_1152000_200] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 4,
+		.base_baud	= 1152000,
+		.uart_offset	= 0x200,
+	},
+
+	[pbn_b0_8_1152000_200] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 2,
+		.base_baud	= 1152000,
+		.uart_offset	= 0x200,
+	},
+
 	[pbn_b0_2_1843200] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 2,
@@ -2580,6 +2774,30 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 		.base_baud	= 921600,
 		.uart_offset	= 0x200,
 	},
+	[pbn_exar_XR17V352] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 2,
+		.base_baud	= 7812500,
+		.uart_offset	= 0x400,
+		.reg_shift	= 0,
+		.first_offset	= 0,
+	},
+	[pbn_exar_XR17V354] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 4,
+		.base_baud	= 7812500,
+		.uart_offset	= 0x400,
+		.reg_shift	= 0,
+		.first_offset	= 0,
+	},
+	[pbn_exar_XR17V358] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 8,
+		.base_baud	= 7812500,
+		.uart_offset	= 0x400,
+		.reg_shift	= 0,
+		.first_offset	= 0,
+	},
 	[pbn_exar_ibm_saturn] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 1,
@@ -2658,8 +2876,8 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 		.first_offset	= 0x1000,
 	},
 	[pbn_ce4100_1_115200] = {
-		.flags		= FL_BASE0,
-		.num_ports	= 1,
+		.flags		= FL_BASE_BARS,
+		.num_ports	= 2,
 		.base_baud	= 921600,
 		.reg_shift      = 2,
 	},
@@ -2691,7 +2909,7 @@ static const struct pci_device_id blacklist[] = {
  * guess what the configuration might be, based on the pitiful PCI
  * serial specs.  Returns 0 on success, 1 on failure.
  */
-static int __devinit
+static int
 serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
 {
 	const struct pci_device_id *bldev;
@@ -2917,7 +3135,7 @@ EXPORT_SYMBOL_GPL(pciserial_resume_ports);
  * Probe one serial board.  Unfortunately, there is no rhyme nor reason
  * to the arrangement of serial ports on a PCI card.
  */
-static int __devinit
+static int
 pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
 {
 	struct pci_serial_quirk *quirk;
@@ -2988,7 +3206,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
 	return rc;
 }
 
-static void __devexit pciserial_remove_one(struct pci_dev *dev)
+static void pciserial_remove_one(struct pci_dev *dev)
 {
 	struct serial_private *priv = pci_get_drvdata(dev);
 
@@ -3826,6 +4044,21 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID,
 		0,
 		0, pbn_exar_XR17C158 },
+	/*
+	 * Exar Corp. XR17V35[248] Dual/Quad/Octal PCIe UARTs
+	 */
+	{	PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V352,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_exar_XR17V352 },
+	{	PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V354,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_exar_XR17V354 },
+	{	PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V358,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_exar_XR17V358 },
 
 	/*
 	 * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
@@ -4257,6 +4490,38 @@ static struct pci_device_id serial_pci_tbl[] = {
 		0, 0, pbn_b0_bt_2_115200 },
 
 	/*
+	 * Commtech, Inc. Fastcom adapters
+	 */
+	{	PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4222PCI335,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_b0_2_1152000_200 },
+	{	PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4224PCI335,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_b0_4_1152000_200 },
+	{	PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_2324PCI335,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_b0_4_1152000_200 },
+	{	PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_2328PCI335,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_b0_8_1152000_200 },
+	{	PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4222PCIE,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_exar_XR17V352 },
+	{	PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4224PCIE,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_exar_XR17V354 },
+	{	PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4228PCIE,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_exar_XR17V358 },
+
+	/*
 	 * These entries match devices with class COMMUNICATION_SERIAL,
 	 * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
 	 */
@@ -4323,7 +4588,7 @@ static const struct pci_error_handlers serial8250_err_handler = {
 static struct pci_driver serial_pci_driver = {
 	.name		= "serial",
 	.probe		= pciserial_init_one,
-	.remove		= __devexit_p(pciserial_remove_one),
+	.remove		= pciserial_remove_one,
 #ifdef CONFIG_PM
 	.suspend	= pciserial_suspend_one,
 	.resume		= pciserial_resume_one,
@@ -4332,18 +4597,7 @@ static struct pci_driver serial_pci_driver = {
 	.err_handler	= &serial8250_err_handler,
 };
 
-static int __init serial8250_pci_init(void)
-{
-	return pci_register_driver(&serial_pci_driver);
-}
-
-static void __exit serial8250_pci_exit(void)
-{
-	pci_unregister_driver(&serial_pci_driver);
-}
-
-module_init(serial8250_pci_init);
-module_exit(serial8250_pci_exit);
+module_pci_driver(serial_pci_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module");
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index f8ee25001dd..35d9ab95c5c 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -370,14 +370,14 @@ static const struct pnp_device_id pnp_dev_table[] = {
 
 MODULE_DEVICE_TABLE(pnp, pnp_dev_table);
 
-static char *modem_names[] __devinitdata = {
+static char *modem_names[] = {
 	"MODEM", "Modem", "modem", "FAX", "Fax", "fax",
 	"56K", "56k", "K56", "33.6", "28.8", "14.4",
 	"33,600", "28,800", "14,400", "33.600", "28.800", "14.400",
 	"33600", "28800", "14400", "V.90", "V.34", "V.32", NULL
 };
 
-static int __devinit check_name(char *name)
+static int check_name(char *name)
 {
 	char **tmp;
 
@@ -388,7 +388,7 @@ static int __devinit check_name(char *name)
 	return 0;
 }
 
-static int __devinit check_resources(struct pnp_dev *dev)
+static int check_resources(struct pnp_dev *dev)
 {
 	resource_size_t base[] = {0x2f8, 0x3f8, 0x2e8, 0x3e8};
 	int i;
@@ -412,7 +412,7 @@ static int __devinit check_resources(struct pnp_dev *dev)
  * PnP modems, alternatively we must hardcode all modems in pnp_devices[]
  * table.
  */
-static int __devinit serial_pnp_guess_board(struct pnp_dev *dev)
+static int serial_pnp_guess_board(struct pnp_dev *dev)
 {
 	if (!(check_name(pnp_dev_name(dev)) ||
 		(dev->card && check_name(dev->card->name))))
@@ -424,7 +424,7 @@ static int __devinit serial_pnp_guess_board(struct pnp_dev *dev)
 	return -ENODEV;
 }
 
-static int __devinit
+static int
 serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 {
 	struct uart_8250_port uart;
@@ -476,7 +476,7 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 	return 0;
 }
 
-static void __devexit serial_pnp_remove(struct pnp_dev *dev)
+static void serial_pnp_remove(struct pnp_dev *dev)
 {
 	long line = (long)pnp_get_drvdata(dev);
 	if (line)
@@ -511,7 +511,7 @@ static int serial_pnp_resume(struct pnp_dev *dev)
 static struct pnp_driver serial_pnp_driver = {
 	.name		= "serial",
 	.probe		= serial_pnp_probe,
-	.remove		= __devexit_p(serial_pnp_remove),
+	.remove		= serial_pnp_remove,
 	.suspend	= serial_pnp_suspend,
 	.resume		= serial_pnp_resume,
 	.id_table	= pnp_dev_table,
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 2a53be5f010..59c23d03810 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -93,7 +93,7 @@ config SERIAL_SB1250_DUART_CONSOLE
 
 config SERIAL_ATMEL
 	bool "AT91 / AT32 on-chip serial port support"
-	depends on (ARM && ARCH_AT91) || AVR32
+	depends on ARCH_AT91 || AVR32
 	select SERIAL_CORE
 	help
 	  This enables the driver for the on-chip UARTs of the Atmel
@@ -198,7 +198,7 @@ config SERIAL_CLPS711X_CONSOLE
 
 config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
-	depends on ARM && PLAT_SAMSUNG
+	depends on PLAT_SAMSUNG
 	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
@@ -208,14 +208,14 @@ config SERIAL_SAMSUNG
 
 config SERIAL_SAMSUNG_UARTS_4
 	bool
-	depends on ARM && PLAT_SAMSUNG
+	depends on PLAT_SAMSUNG
 	default y if !(CPU_S3C2410 || SERIAL_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
 	help
 	  Internal node for the common case of 4 Samsung compatible UARTs
 
 config SERIAL_SAMSUNG_UARTS
 	int
-	depends on ARM && PLAT_SAMSUNG
+	depends on PLAT_SAMSUNG
 	default 6 if ARCH_S5P6450
 	default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
 	default 3
@@ -249,7 +249,7 @@ config SERIAL_SAMSUNG_CONSOLE
 
 config SERIAL_SIRFSOC
         tristate "SiRF SoC Platform Serial port support"
-        depends on ARM && ARCH_PRIMA2
+        depends on ARCH_PRIMA2
         select SERIAL_CORE
         help
           Support for the on-chip UART on the CSR SiRFprimaII series,
@@ -347,7 +347,7 @@ config SERIAL_ZS_CONSOLE
 
 config SERIAL_21285
 	tristate "DC21285 serial port support"
-	depends on ARM && FOOTBRIDGE
+	depends on FOOTBRIDGE
 	select SERIAL_CORE
 	help
 	  If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
@@ -371,7 +371,7 @@ config SERIAL_21285_CONSOLE
 
 config SERIAL_MPSC
 	bool "Marvell MPSC serial port support"
-	depends on PPC32 && MV64X60
+	depends on MV64X60
 	select SERIAL_CORE
 	help
 	  Say Y here if you want to use the Marvell MPSC serial controller.
@@ -408,7 +408,7 @@ config SERIAL_PXA_CONSOLE
 
 config SERIAL_SA1100
 	bool "SA1100 serial port support"
-	depends on ARM && ARCH_SA1100
+	depends on ARCH_SA1100
 	select SERIAL_CORE
 	help
 	  If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
@@ -716,7 +716,7 @@ config SERIAL_SH_SCI_DMA
 
 config SERIAL_PNX8XXX
 	bool "Enable PNX8XXX SoCs' UART Support"
-	depends on MIPS && (SOC_PNX8550 || SOC_PNX833X)
+	depends on SOC_PNX8550 || SOC_PNX833X
 	select SERIAL_CORE
 	help
 	  If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
@@ -1013,7 +1013,7 @@ config SERIAL_SGI_IOC3
 
 config SERIAL_MSM
 	bool "MSM on-chip serial port support"
-	depends on ARM && ARCH_MSM
+	depends on ARCH_MSM
 	select SERIAL_CORE
 
 config SERIAL_MSM_CONSOLE
@@ -1035,7 +1035,7 @@ config SERIAL_MSM_HS
 
 config SERIAL_VT8500
 	bool "VIA VT8500 on-chip serial port support"
-	depends on ARM && ARCH_VT8500
+	depends on ARCH_VT8500
 	select SERIAL_CORE
 
 config SERIAL_VT8500_CONSOLE
@@ -1045,7 +1045,7 @@ config SERIAL_VT8500_CONSOLE
 
 config SERIAL_NETX
 	tristate "NetX serial port support"
-	depends on ARM && ARCH_NETX
+	depends on ARCH_NETX
 	select SERIAL_CORE
 	help
 	  If you have a machine based on a Hilscher NetX SoC you
@@ -1376,6 +1376,7 @@ config SERIAL_MXS_AUART_CONSOLE
 
 config SERIAL_XILINX_PS_UART
 	tristate "Xilinx PS UART support"
+	depends on OF
 	select SERIAL_CORE
 	help
 	  This driver supports the Xilinx PS UART port.
@@ -1423,4 +1424,27 @@ config SERIAL_EFM32_UART_CONSOLE
 	depends on SERIAL_EFM32_UART=y
 	select SERIAL_CORE_CONSOLE
 
+config SERIAL_ARC
+	tristate "ARC UART driver support"
+	select SERIAL_CORE
+	help
+	  Driver for on-chip UART for ARC(Synopsys) for the legacy
+	  FPGA Boards (ML50x/ARCAngel4)
+
+config SERIAL_ARC_CONSOLE
+	bool "Console on ARC UART"
+	depends on SERIAL_ARC=y
+	select SERIAL_CORE_CONSOLE
+	help
+	  Enable system Console on ARC UART
+
+config SERIAL_ARC_NR_PORTS
+	int "Number of ARC UART ports"
+	depends on SERIAL_ARC
+	range 1 3
+	default "1"
+	help
+	  Set this to the number of serial ports you want the driver
+	  to support.
+
 endmenu
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 4f694dafa71..df1b998c436 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -82,3 +82,4 @@ obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
 obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o
 obj-$(CONFIG_SERIAL_AR933X)   += ar933x_uart.o
 obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o
+obj-$(CONFIG_SERIAL_ARC)	+= arc_uart.o
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index 530181e49f6..872f14ae43d 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -406,7 +406,7 @@ static struct uart_driver altera_jtaguart_driver = {
 	.cons		= ALTERA_JTAGUART_CONSOLE,
 };
 
-static int __devinit altera_jtaguart_probe(struct platform_device *pdev)
+static int altera_jtaguart_probe(struct platform_device *pdev)
 {
 	struct altera_jtaguart_platform_uart *platp = pdev->dev.platform_data;
 	struct uart_port *port;
@@ -453,7 +453,7 @@ static int __devinit altera_jtaguart_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit altera_jtaguart_remove(struct platform_device *pdev)
+static int altera_jtaguart_remove(struct platform_device *pdev)
 {
 	struct uart_port *port;
 	int i = pdev->id;
@@ -477,7 +477,7 @@ MODULE_DEVICE_TABLE(of, altera_jtaguart_match);
 
 static struct platform_driver altera_jtaguart_platform_driver = {
 	.probe	= altera_jtaguart_probe,
-	.remove	= __devexit_p(altera_jtaguart_remove),
+	.remove	= altera_jtaguart_remove,
 	.driver	= {
 		.name		= DRV_NAME,
 		.owner		= THIS_MODULE,
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 15d80b9fb30..684a0808e1c 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -532,7 +532,7 @@ static int altera_uart_get_of_uartclk(struct platform_device *pdev,
 }
 #endif /* CONFIG_OF */
 
-static int __devinit altera_uart_probe(struct platform_device *pdev)
+static int altera_uart_probe(struct platform_device *pdev)
 {
 	struct altera_uart_platform_uart *platp = pdev->dev.platform_data;
 	struct uart_port *port;
@@ -598,7 +598,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit altera_uart_remove(struct platform_device *pdev)
+static int altera_uart_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = platform_get_drvdata(pdev);
 
@@ -621,7 +621,7 @@ MODULE_DEVICE_TABLE(of, altera_uart_match);
 
 static struct platform_driver altera_uart_platform_driver = {
 	.probe	= altera_uart_probe,
-	.remove	= __devexit_p(altera_uart_remove),
+	.remove	= altera_uart_remove,
 	.driver	= {
 		.name		= DRV_NAME,
 		.owner		= THIS_MODULE,
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index d7e1edec50b..7fca4022a8b 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -56,8 +56,7 @@
 #include <linux/of_device.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/sizes.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
 
 #define UART_NR			14
 
@@ -1973,7 +1972,8 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 		goto out;
 	}
 
-	uap = kzalloc(sizeof(struct uart_amba_port), GFP_KERNEL);
+	uap = devm_kzalloc(&dev->dev, sizeof(struct uart_amba_port),
+			   GFP_KERNEL);
 	if (uap == NULL) {
 		ret = -ENOMEM;
 		goto out;
@@ -1981,16 +1981,17 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 
 	i = pl011_probe_dt_alias(i, &dev->dev);
 
-	base = ioremap(dev->res.start, resource_size(&dev->res));
+	base = devm_ioremap(&dev->dev, dev->res.start,
+			    resource_size(&dev->res));
 	if (!base) {
 		ret = -ENOMEM;
-		goto free;
+		goto out;
 	}
 
 	uap->pinctrl = devm_pinctrl_get(&dev->dev);
 	if (IS_ERR(uap->pinctrl)) {
 		ret = PTR_ERR(uap->pinctrl);
-		goto unmap;
+		goto out;
 	}
 	uap->pins_default = pinctrl_lookup_state(uap->pinctrl,
 						 PINCTRL_STATE_DEFAULT);
@@ -2002,10 +2003,10 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 	if (IS_ERR(uap->pins_sleep))
 		dev_dbg(&dev->dev, "could not get sleep pinstate\n");
 
-	uap->clk = clk_get(&dev->dev, NULL);
+	uap->clk = devm_clk_get(&dev->dev, NULL);
 	if (IS_ERR(uap->clk)) {
 		ret = PTR_ERR(uap->clk);
-		goto unmap;
+		goto out;
 	}
 
 	uap->vendor = vendor;
@@ -2038,11 +2039,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 		amba_set_drvdata(dev, NULL);
 		amba_ports[i] = NULL;
 		pl011_dma_remove(uap);
-		clk_put(uap->clk);
- unmap:
-		iounmap(base);
- free:
-		kfree(uap);
 	}
  out:
 	return ret;
@@ -2062,9 +2058,6 @@ static int pl011_remove(struct amba_device *dev)
 			amba_ports[i] = NULL;
 
 	pl011_dma_remove(uap);
-	iounmap(uap->port.membase);
-	clk_put(uap->clk);
-	kfree(uap);
 	return 0;
 }
 
diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c
index 7162f70d926..59ae2b53e76 100644
--- a/drivers/tty/serial/apbuart.c
+++ b/drivers/tty/serial/apbuart.c
@@ -554,7 +554,7 @@ static struct uart_driver grlib_apbuart_driver = {
 /* OF Platform Driver                                                       */
 /* ======================================================================== */
 
-static int __devinit apbuart_probe(struct platform_device *op)
+static int apbuart_probe(struct platform_device *op)
 {
 	int i;
 	struct uart_port *port = NULL;
diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c
index e4f60e2b87f..505c490c0b4 100644
--- a/drivers/tty/serial/ar933x_uart.c
+++ b/drivers/tty/serial/ar933x_uart.c
@@ -25,11 +25,19 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 
+#include <asm/div64.h>
+
 #include <asm/mach-ath79/ar933x_uart.h>
 #include <asm/mach-ath79/ar933x_uart_platform.h>
 
 #define DRIVER_NAME "ar933x-uart"
 
+#define AR933X_UART_MAX_SCALE	0xff
+#define AR933X_UART_MAX_STEP	0xffff
+
+#define AR933X_UART_MIN_BAUD	300
+#define AR933X_UART_MAX_BAUD	3000000
+
 #define AR933X_DUMMY_STATUS_RD	0x01
 
 static struct uart_driver ar933x_uart_driver;
@@ -37,6 +45,8 @@ static struct uart_driver ar933x_uart_driver;
 struct ar933x_uart_port {
 	struct uart_port	port;
 	unsigned int		ier;	/* shadow Interrupt Enable Register */
+	unsigned int		min_baud;
+	unsigned int		max_baud;
 };
 
 static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up,
@@ -162,6 +172,57 @@ static void ar933x_uart_enable_ms(struct uart_port *port)
 {
 }
 
+/*
+ * baudrate = (clk / (scale + 1)) * (step * (1 / 2^17))
+ */
+static unsigned long ar933x_uart_get_baud(unsigned int clk,
+					  unsigned int scale,
+					  unsigned int step)
+{
+	u64 t;
+	u32 div;
+
+	div = (2 << 16) * (scale + 1);
+	t = clk;
+	t *= step;
+	t += (div / 2);
+	do_div(t, div);
+
+	return t;
+}
+
+static void ar933x_uart_get_scale_step(unsigned int clk,
+				       unsigned int baud,
+				       unsigned int *scale,
+				       unsigned int *step)
+{
+	unsigned int tscale;
+	long min_diff;
+
+	*scale = 0;
+	*step = 0;
+
+	min_diff = baud;
+	for (tscale = 0; tscale < AR933X_UART_MAX_SCALE; tscale++) {
+		u64 tstep;
+		int diff;
+
+		tstep = baud * (tscale + 1);
+		tstep *= (2 << 16);
+		do_div(tstep, clk);
+
+		if (tstep > AR933X_UART_MAX_STEP)
+			break;
+
+		diff = abs(ar933x_uart_get_baud(clk, tscale, tstep) - baud);
+		if (diff < min_diff) {
+			min_diff = diff;
+			*scale = tscale;
+			*step = tstep;
+		}
+	}
+}
+
 static void ar933x_uart_set_termios(struct uart_port *port,
 				    struct ktermios *new,
 				    struct ktermios *old)
@@ -169,7 +230,7 @@ static void ar933x_uart_set_termios(struct uart_port *port,
 	struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
 	unsigned int cs;
 	unsigned long flags;
-	unsigned int baud, scale;
+	unsigned int baud, scale, step;
 
 	/* Only CS8 is supported */
 	new->c_cflag &= ~CSIZE;
@@ -191,8 +252,8 @@ static void ar933x_uart_set_termios(struct uart_port *port,
 	/* Mark/space parity is not supported */
 	new->c_cflag &= ~CMSPAR;
 
-	baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
-	scale = (port->uartclk / (16 * baud)) - 1;
+	baud = uart_get_baud_rate(port, new, old, up->min_baud, up->max_baud);
+	ar933x_uart_get_scale_step(port->uartclk, baud, &scale, &step);
 
 	/*
 	 * Ok, we're now changing the port state. Do it with
@@ -200,6 +261,10 @@ static void ar933x_uart_set_termios(struct uart_port *port,
 	 */
 	spin_lock_irqsave(&up->port.lock, flags);
 
+	/* disable the UART */
+	ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG,
+		      AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S);
+
 	/* Update the per-port timeout. */
 	uart_update_timeout(port, new->c_cflag, baud);
 
@@ -210,7 +275,7 @@ static void ar933x_uart_set_termios(struct uart_port *port,
 		up->port.ignore_status_mask |= AR933X_DUMMY_STATUS_RD;
 
 	ar933x_uart_write(up, AR933X_UART_CLOCK_REG,
-			  scale << AR933X_UART_CLOCK_SCALE_S | 8192);
+			  scale << AR933X_UART_CLOCK_SCALE_S | step);
 
 	/* setup configuration register */
 	ar933x_uart_rmw(up, AR933X_UART_CS_REG, AR933X_UART_CS_PARITY_M, cs);
@@ -219,6 +284,11 @@ static void ar933x_uart_set_termios(struct uart_port *port,
 	ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
 			    AR933X_UART_CS_HOST_INT_EN);
 
+	/* reenable the UART */
+	ar933x_uart_rmw(up, AR933X_UART_CS_REG,
+			AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S,
+			AR933X_UART_CS_IF_MODE_DCE << AR933X_UART_CS_IF_MODE_S);
+
 	spin_unlock_irqrestore(&up->port.lock, flags);
 
 	if (tty_termios_baud_rate(new))
@@ -401,6 +471,8 @@ static void ar933x_uart_config_port(struct uart_port *port, int flags)
 static int ar933x_uart_verify_port(struct uart_port *port,
 				   struct serial_struct *ser)
 {
+	struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+
 	if (ser->type != PORT_UNKNOWN &&
 	    ser->type != PORT_AR933X)
 		return -EINVAL;
@@ -408,7 +480,8 @@ static int ar933x_uart_verify_port(struct uart_port *port,
 	if (ser->irq < 0 || ser->irq >= NR_IRQS)
 		return -EINVAL;
 
-	if (ser->baud_base < 28800)
+	if (ser->baud_base < up->min_baud ||
+	    ser->baud_base > up->max_baud)
 		return -EINVAL;
 
 	return 0;
@@ -554,13 +627,14 @@ static struct uart_driver ar933x_uart_driver = {
 	.cons		= AR933X_SERIAL_CONSOLE,
 };
 
-static int __devinit ar933x_uart_probe(struct platform_device *pdev)
+static int ar933x_uart_probe(struct platform_device *pdev)
 {
 	struct ar933x_uart_platform_data *pdata;
 	struct ar933x_uart_port *up;
 	struct uart_port *port;
 	struct resource *mem_res;
 	struct resource *irq_res;
+	unsigned int baud;
 	int id;
 	int ret;
 
@@ -611,6 +685,12 @@ static int __devinit ar933x_uart_probe(struct platform_device *pdev)
 	port->fifosize = AR933X_UART_FIFO_SIZE;
 	port->ops = &ar933x_uart_ops;
 
+	baud = ar933x_uart_get_baud(port->uartclk, AR933X_UART_MAX_SCALE, 1);
+	up->min_baud = max_t(unsigned int, baud, AR933X_UART_MIN_BAUD);
+
+	baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP);
+	up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD);
+
 	ar933x_uart_add_console_port(up);
 
 	ret = uart_add_one_port(&ar933x_uart_driver, &up->port);
@@ -627,7 +707,7 @@ err_free_up:
 	return ret;
 }
 
-static int __devexit ar933x_uart_remove(struct platform_device *pdev)
+static int ar933x_uart_remove(struct platform_device *pdev)
 {
 	struct ar933x_uart_port *up;
 
@@ -645,7 +725,7 @@ static int __devexit ar933x_uart_remove(struct platform_device *pdev)
 
 static struct platform_driver ar933x_uart_platform_driver = {
 	.probe		= ar933x_uart_probe,
-	.remove		= __devexit_p(ar933x_uart_remove),
+	.remove		= ar933x_uart_remove,
 	.driver		= {
 		.name		= DRIVER_NAME,
 		.owner		= THIS_MODULE,
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c
new file mode 100644
index 00000000000..3e0b3fac6a0
--- /dev/null
+++ b/drivers/tty/serial/arc_uart.c
@@ -0,0 +1,746 @@
+/*
+ * ARC On-Chip(fpga) UART Driver
+ *
+ * Copyright (C) 2010-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * vineetg: July 10th 2012
+ *  -Decoupled the driver from arch/arc
+ *    +Using platform_get_resource() for irq/membase (thx to bfin_uart.c)
+ *    +Using early_platform_xxx() for early console (thx to mach-shmobile/xxx)
+ *
+ * Vineetg: Aug 21st 2010
+ *  -Is uart_tx_stopped() not done in tty write path as it has already been
+ *   taken care of, in serial core
+ *
+ * Vineetg: Aug 18th 2010
+ *  -New Serial Core based ARC UART driver
+ *  -Derived largely from blackfin driver albiet with some major tweaks
+ *
+ * TODO:
+ *  -check if sysreq works
+ */
+
+#if defined(CONFIG_SERIAL_ARC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/platform_device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+/*************************************
+ * ARC UART Hardware Specs
+ ************************************/
+#define ARC_UART_TX_FIFO_SIZE  1
+
+/*
+ * UART Register set (this is not a Standards Compliant IP)
+ * Also each reg is Word aligned, but only 8 bits wide
+ */
+#define R_ID0	0
+#define R_ID1	4
+#define R_ID2	8
+#define R_ID3	12
+#define R_DATA	16
+#define R_STS	20
+#define R_BAUDL	24
+#define R_BAUDH	28
+
+/* Bits for UART Status Reg (R/W) */
+#define RXIENB  0x04	/* Receive Interrupt Enable */
+#define TXIENB  0x40	/* Transmit Interrupt Enable */
+
+#define RXEMPTY 0x20	/* Receive FIFO Empty: No char receivede */
+#define TXEMPTY 0x80	/* Transmit FIFO Empty, thus char can be written into */
+
+#define RXFULL  0x08	/* Receive FIFO full */
+#define RXFULL1 0x10	/* Receive FIFO has space for 1 char (tot space=4) */
+
+#define RXFERR  0x01	/* Frame Error: Stop Bit not detected */
+#define RXOERR  0x02	/* OverFlow Err: Char recv but RXFULL still set */
+
+/* Uart bit fiddling helpers: lowest level */
+#define RBASE(uart, reg)      (uart->port.membase + reg)
+#define UART_REG_SET(u, r, v) writeb((v), RBASE(u, r))
+#define UART_REG_GET(u, r)    readb(RBASE(u, r))
+
+#define UART_REG_OR(u, r, v)  UART_REG_SET(u, r, UART_REG_GET(u, r) | (v))
+#define UART_REG_CLR(u, r, v) UART_REG_SET(u, r, UART_REG_GET(u, r) & ~(v))
+
+/* Uart bit fiddling helpers: API level */
+#define UART_SET_DATA(uart, val)   UART_REG_SET(uart, R_DATA, val)
+#define UART_GET_DATA(uart)        UART_REG_GET(uart, R_DATA)
+
+#define UART_SET_BAUDH(uart, val)  UART_REG_SET(uart, R_BAUDH, val)
+#define UART_SET_BAUDL(uart, val)  UART_REG_SET(uart, R_BAUDL, val)
+
+#define UART_CLR_STATUS(uart, val) UART_REG_CLR(uart, R_STS, val)
+#define UART_GET_STATUS(uart)      UART_REG_GET(uart, R_STS)
+
+#define UART_ALL_IRQ_DISABLE(uart) UART_REG_CLR(uart, R_STS, RXIENB|TXIENB)
+#define UART_RX_IRQ_DISABLE(uart)  UART_REG_CLR(uart, R_STS, RXIENB)
+#define UART_TX_IRQ_DISABLE(uart)  UART_REG_CLR(uart, R_STS, TXIENB)
+
+#define UART_ALL_IRQ_ENABLE(uart)  UART_REG_OR(uart, R_STS, RXIENB|TXIENB)
+#define UART_RX_IRQ_ENABLE(uart)   UART_REG_OR(uart, R_STS, RXIENB)
+#define UART_TX_IRQ_ENABLE(uart)   UART_REG_OR(uart, R_STS, TXIENB)
+
+#define ARC_SERIAL_DEV_NAME	"ttyARC"
+
+struct arc_uart_port {
+	struct uart_port port;
+	unsigned long baud;
+	int is_emulated;	/* H/w vs. Instruction Set Simulator */
+};
+
+#define to_arc_port(uport)  container_of(uport, struct arc_uart_port, port)
+
+static struct arc_uart_port arc_uart_ports[CONFIG_SERIAL_ARC_NR_PORTS];
+
+#ifdef CONFIG_SERIAL_ARC_CONSOLE
+static struct console arc_console;
+#endif
+
+#define DRIVER_NAME	"arc-uart"
+
+static struct uart_driver arc_uart_driver = {
+	.owner		= THIS_MODULE,
+	.driver_name	= DRIVER_NAME,
+	.dev_name	= ARC_SERIAL_DEV_NAME,
+	.major		= 0,
+	.minor		= 0,
+	.nr		= CONFIG_SERIAL_ARC_NR_PORTS,
+#ifdef CONFIG_SERIAL_ARC_CONSOLE
+	.cons		= &arc_console,
+#endif
+};
+
+static void arc_serial_stop_rx(struct uart_port *port)
+{
+	struct arc_uart_port *uart = to_arc_port(port);
+
+	UART_RX_IRQ_DISABLE(uart);
+}
+
+static void arc_serial_stop_tx(struct uart_port *port)
+{
+	struct arc_uart_port *uart = to_arc_port(port);
+
+	while (!(UART_GET_STATUS(uart) & TXEMPTY))
+		cpu_relax();
+
+	UART_TX_IRQ_DISABLE(uart);
+}
+
+/*
+ * Return TIOCSER_TEMT when transmitter is not busy.
+ */
+static unsigned int arc_serial_tx_empty(struct uart_port *port)
+{
+	struct arc_uart_port *uart = to_arc_port(port);
+	unsigned int stat;
+
+	stat = UART_GET_STATUS(uart);
+	if (stat & TXEMPTY)
+		return TIOCSER_TEMT;
+
+	return 0;
+}
+
+/*
+ * Driver internal routine, used by both tty(serial core) as well as tx-isr
+ *  -Called under spinlock in either cases
+ *  -also tty->stopped / tty->hw_stopped has already been checked
+ *     = by uart_start( ) before calling us
+ *     = tx_ist checks that too before calling
+ */
+static void arc_serial_tx_chars(struct arc_uart_port *uart)
+{
+	struct circ_buf *xmit = &uart->port.state->xmit;
+	int sent = 0;
+	unsigned char ch;
+
+	if (unlikely(uart->port.x_char)) {
+		UART_SET_DATA(uart, uart->port.x_char);
+		uart->port.icount.tx++;
+		uart->port.x_char = 0;
+		sent = 1;
+	} else if (xmit->tail != xmit->head) {	/* TODO: uart_circ_empty */
+		ch = xmit->buf[xmit->tail];
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		uart->port.icount.tx++;
+		while (!(UART_GET_STATUS(uart) & TXEMPTY))
+			cpu_relax();
+		UART_SET_DATA(uart, ch);
+		sent = 1;
+	}
+
+	/*
+	 * If num chars in xmit buffer are too few, ask tty layer for more.
+	 * By Hard ISR to schedule processing in software interrupt part
+	 */
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(&uart->port);
+
+	if (sent)
+		UART_TX_IRQ_ENABLE(uart);
+}
+
+/*
+ * port is locked and interrupts are disabled
+ * uart_start( ) calls us under the port spinlock irqsave
+ */
+static void arc_serial_start_tx(struct uart_port *port)
+{
+	struct arc_uart_port *uart = to_arc_port(port);
+
+	arc_serial_tx_chars(uart);
+}
+
+static void arc_serial_rx_chars(struct arc_uart_port *uart)
+{
+	struct tty_struct *tty = tty_port_tty_get(&uart->port.state->port);
+	unsigned int status, ch, flg = 0;
+
+	if (!tty)
+		return;
+
+	/*
+	 * UART has 4 deep RX-FIFO. Driver's recongnition of this fact
+	 * is very subtle. Here's how ...
+	 * Upon getting a RX-Intr, such that RX-EMPTY=0, meaning data available,
+	 * driver reads the DATA Reg and keeps doing that in a loop, until
+	 * RX-EMPTY=1. Multiple chars being avail, with a single Interrupt,
+	 * before RX-EMPTY=0, implies some sort of buffering going on in the
+	 * controller, which is indeed the Rx-FIFO.
+	 */
+	while (!((status = UART_GET_STATUS(uart)) & RXEMPTY)) {
+
+		ch = UART_GET_DATA(uart);
+		uart->port.icount.rx++;
+
+		if (unlikely(status & (RXOERR | RXFERR))) {
+			if (status & RXOERR) {
+				uart->port.icount.overrun++;
+				flg = TTY_OVERRUN;
+				UART_CLR_STATUS(uart, RXOERR);
+			}
+
+			if (status & RXFERR) {
+				uart->port.icount.frame++;
+				flg = TTY_FRAME;
+				UART_CLR_STATUS(uart, RXFERR);
+			}
+		} else
+			flg = TTY_NORMAL;
+
+		if (unlikely(uart_handle_sysrq_char(&uart->port, ch)))
+			goto done;
+
+		uart_insert_char(&uart->port, status, RXOERR, ch, flg);
+
+done:
+		tty_flip_buffer_push(tty);
+	}
+
+	tty_kref_put(tty);
+}
+
+/*
+ * A note on the Interrupt handling state machine of this driver
+ *
+ * kernel printk writes funnel thru the console driver framework and in order
+ * to keep things simple as well as efficient, it writes to UART in polled
+ * mode, in one shot, and exits.
+ *
+ * OTOH, Userland output (via tty layer), uses interrupt based writes as there
+ * can be undeterministic delay between char writes.
+ *
+ * Thus Rx-interrupts are always enabled, while tx-interrupts are by default
+ * disabled.
+ *
+ * When tty has some data to send out, serial core calls driver's start_tx
+ * which
+ *   -checks-if-tty-buffer-has-char-to-send
+ *   -writes-data-to-uart
+ *   -enable-tx-intr
+ *
+ * Once data bits are pushed out, controller raises the Tx-room-avail-Interrupt.
+ * The first thing Tx ISR does is disable further Tx interrupts (as this could
+ * be the last char to send, before settling down into the quiet polled mode).
+ * It then calls the exact routine used by tty layer write to send out any
+ * more char in tty buffer. In case of sending, it re-enables Tx-intr. In case
+ * of no data, it remains disabled.
+ * This is how the transmit state machine is dynamically switched on/off
+ */
+
+static irqreturn_t arc_serial_isr(int irq, void *dev_id)
+{
+	struct arc_uart_port *uart = dev_id;
+	unsigned int status;
+
+	status = UART_GET_STATUS(uart);
+
+	/*
+	 * Single IRQ for both Rx (data available) Tx (room available) Interrupt
+	 * notifications from the UART Controller.
+	 * To demultiplex between the two, we check the relevant bits
+	 */
+	if ((status & RXIENB) && !(status & RXEMPTY)) {
+
+		/* already in ISR, no need of xx_irqsave */
+		spin_lock(&uart->port.lock);
+		arc_serial_rx_chars(uart);
+		spin_unlock(&uart->port.lock);
+	}
+
+	if ((status & TXIENB) && (status & TXEMPTY)) {
+
+		/* Unconditionally disable further Tx-Interrupts.
+		 * will be enabled by tx_chars() if needed.
+		 */
+		UART_TX_IRQ_DISABLE(uart);
+
+		spin_lock(&uart->port.lock);
+
+		if (!uart_tx_stopped(&uart->port))
+			arc_serial_tx_chars(uart);
+
+		spin_unlock(&uart->port.lock);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static unsigned int arc_serial_get_mctrl(struct uart_port *port)
+{
+	/*
+	 * Pretend we have a Modem status reg and following bits are
+	 *  always set, to satify the serial core state machine
+	 *  (DSR) Data Set Ready
+	 *  (CTS) Clear To Send
+	 *  (CAR) Carrier Detect
+	 */
+	return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+}
+
+static void arc_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	/* MCR not present */
+}
+
+/* Enable Modem Status Interrupts */
+
+static void arc_serial_enable_ms(struct uart_port *port)
+{
+	/* MSR not present */
+}
+
+static void arc_serial_break_ctl(struct uart_port *port, int break_state)
+{
+	/* ARC UART doesn't support sending Break signal */
+}
+
+static int arc_serial_startup(struct uart_port *port)
+{
+	struct arc_uart_port *uart = to_arc_port(port);
+
+	/* Before we hook up the ISR, Disable all UART Interrupts */
+	UART_ALL_IRQ_DISABLE(uart);
+
+	if (request_irq(uart->port.irq, arc_serial_isr, 0, "arc uart rx-tx",
+			uart)) {
+		dev_warn(uart->port.dev, "Unable to attach ARC UART intr\n");
+		return -EBUSY;
+	}
+
+	UART_RX_IRQ_ENABLE(uart); /* Only Rx IRQ enabled to begin with */
+
+	return 0;
+}
+
+/* This is not really needed */
+static void arc_serial_shutdown(struct uart_port *port)
+{
+	struct arc_uart_port *uart = to_arc_port(port);
+	free_irq(uart->port.irq, uart);
+}
+
+static void
+arc_serial_set_termios(struct uart_port *port, struct ktermios *new,
+		       struct ktermios *old)
+{
+	struct arc_uart_port *uart = to_arc_port(port);
+	unsigned int baud, uartl, uarth, hw_val;
+	unsigned long flags;
+
+	/*
+	 * Use the generic handler so that any specially encoded baud rates
+	 * such as SPD_xx flags or "%B0" can be handled
+	 * Max Baud I suppose will not be more than current 115K * 4
+	 * Formula for ARC UART is: hw-val = ((CLK/(BAUD*4)) -1)
+	 * spread over two 8-bit registers
+	 */
+	baud = uart_get_baud_rate(port, new, old, 0, 460800);
+
+	hw_val = port->uartclk / (uart->baud * 4) - 1;
+	uartl = hw_val & 0xFF;
+	uarth = (hw_val >> 8) & 0xFF;
+
+	/*
+	 * UART ISS(Instruction Set simulator) emulation has a subtle bug:
+	 * A existing value of Baudh = 0 is used as a indication to startup
+	 * it's internal state machine.
+	 * Thus if baudh is set to 0, 2 times, it chokes.
+	 * This happens with BAUD=115200 and the formaula above
+	 * Until that is fixed, when running on ISS, we will set baudh to !0
+	 */
+	if (uart->is_emulated)
+		uarth = 1;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	UART_ALL_IRQ_DISABLE(uart);
+
+	UART_SET_BAUDL(uart, uartl);
+	UART_SET_BAUDH(uart, uarth);
+
+	UART_RX_IRQ_ENABLE(uart);
+
+	/*
+	 * UART doesn't support Parity/Hardware Flow Control;
+	 * Only supports 8N1 character size
+	 */
+	new->c_cflag &= ~(CMSPAR|CRTSCTS|CSIZE);
+	new->c_cflag |= CS8;
+
+	if (old)
+		tty_termios_copy_hw(new, old);
+
+	/* Don't rewrite B0 */
+	if (tty_termios_baud_rate(new))
+		tty_termios_encode_baud_rate(new, baud, baud);
+
+	uart_update_timeout(port, new->c_cflag, baud);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *arc_serial_type(struct uart_port *port)
+{
+	struct arc_uart_port *uart = to_arc_port(port);
+
+	return uart->port.type == PORT_ARC ? DRIVER_NAME : NULL;
+}
+
+static void arc_serial_release_port(struct uart_port *port)
+{
+}
+
+static int arc_serial_request_port(struct uart_port *port)
+{
+	return 0;
+}
+
+/*
+ * Verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int
+arc_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+	if (port->type != PORT_UNKNOWN && ser->type != PORT_ARC)
+		return -EINVAL;
+
+	return 0;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void arc_serial_config_port(struct uart_port *port, int flags)
+{
+	struct arc_uart_port *uart = to_arc_port(port);
+
+	if (flags & UART_CONFIG_TYPE)
+		uart->port.type = PORT_ARC;
+}
+
+#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_ARC_CONSOLE)
+
+static void arc_serial_poll_putchar(struct uart_port *port, unsigned char chr)
+{
+	struct arc_uart_port *uart = to_arc_port(port);
+
+	while (!(UART_GET_STATUS(uart) & TXEMPTY))
+		cpu_relax();
+
+	UART_SET_DATA(uart, chr);
+}
+#endif
+
+#ifdef CONFIG_CONSOLE_POLL
+static int arc_serial_poll_getchar(struct uart_port *port)
+{
+	struct arc_uart_port *uart = to_arc_port(port);
+	unsigned char chr;
+
+	while (!(UART_GET_STATUS(uart) & RXEMPTY))
+		cpu_relax();
+
+	chr = UART_GET_DATA(uart);
+	return chr;
+}
+#endif
+
+static struct uart_ops arc_serial_pops = {
+	.tx_empty	= arc_serial_tx_empty,
+	.set_mctrl	= arc_serial_set_mctrl,
+	.get_mctrl	= arc_serial_get_mctrl,
+	.stop_tx	= arc_serial_stop_tx,
+	.start_tx	= arc_serial_start_tx,
+	.stop_rx	= arc_serial_stop_rx,
+	.enable_ms	= arc_serial_enable_ms,
+	.break_ctl	= arc_serial_break_ctl,
+	.startup	= arc_serial_startup,
+	.shutdown	= arc_serial_shutdown,
+	.set_termios	= arc_serial_set_termios,
+	.type		= arc_serial_type,
+	.release_port	= arc_serial_release_port,
+	.request_port	= arc_serial_request_port,
+	.config_port	= arc_serial_config_port,
+	.verify_port	= arc_serial_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_put_char = arc_serial_poll_putchar,
+	.poll_get_char = arc_serial_poll_getchar,
+#endif
+};
+
+static int
+arc_uart_init_one(struct platform_device *pdev, struct arc_uart_port *uart)
+{
+	struct resource *res, *res2;
+	unsigned long *plat_data;
+
+	if (pdev->id < 0 || pdev->id >= CONFIG_SERIAL_ARC_NR_PORTS) {
+		dev_err(&pdev->dev, "Wrong uart platform device id.\n");
+		return -ENOENT;
+	}
+
+	plat_data = ((unsigned long *)(pdev->dev.platform_data));
+	uart->baud = plat_data[0];
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res2)
+		return -ENODEV;
+
+	uart->port.mapbase = res->start;
+	uart->port.membase = ioremap_nocache(res->start, resource_size(res));
+	if (!uart->port.membase)
+		/* No point of dev_err since UART itself is hosed here */
+		return -ENXIO;
+
+	uart->port.irq = res2->start;
+	uart->port.dev = &pdev->dev;
+	uart->port.iotype = UPIO_MEM;
+	uart->port.flags = UPF_BOOT_AUTOCONF;
+	uart->port.line = pdev->id;
+	uart->port.ops = &arc_serial_pops;
+
+	uart->port.uartclk = plat_data[1];
+	uart->port.fifosize = ARC_UART_TX_FIFO_SIZE;
+
+	/*
+	 * uart_insert_char( ) uses it in decideding whether to ignore a
+	 * char or not. Explicitly setting it here, removes the subtelty
+	 */
+	uart->port.ignore_status_mask = 0;
+
+	/* Real Hardware vs. emulated to work around a bug */
+	uart->is_emulated = !!plat_data[2];
+
+	return 0;
+}
+
+#ifdef CONFIG_SERIAL_ARC_CONSOLE
+
+static int arc_serial_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = 115200;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	if (co->index < 0 || co->index >= CONFIG_SERIAL_ARC_NR_PORTS)
+		return -ENODEV;
+
+	/*
+	 * The uart port backing the console (e.g. ttyARC1) might not have been
+	 * init yet. If so, defer the console setup to after the port.
+	 */
+	port = &arc_uart_ports[co->index].port;
+	if (!port->membase)
+		return -ENODEV;
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	/*
+	 * Serial core will call port->ops->set_termios( )
+	 * which will set the baud reg
+	 */
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static void arc_serial_console_putchar(struct uart_port *port, int ch)
+{
+	arc_serial_poll_putchar(port, (unsigned char)ch);
+}
+
+/*
+ * Interrupts are disabled on entering
+ */
+static void arc_serial_console_write(struct console *co, const char *s,
+				     unsigned int count)
+{
+	struct uart_port *port = &arc_uart_ports[co->index].port;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	uart_console_write(port, s, count, arc_serial_console_putchar);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static struct console arc_console = {
+	.name	= ARC_SERIAL_DEV_NAME,
+	.write	= arc_serial_console_write,
+	.device	= uart_console_device,
+	.setup	= arc_serial_console_setup,
+	.flags	= CON_PRINTBUFFER,
+	.index	= -1,
+	.data	= &arc_uart_driver
+};
+
+static __init void early_serial_write(struct console *con, const char *s,
+					unsigned int n)
+{
+	struct uart_port *port = &arc_uart_ports[con->index].port;
+	unsigned int i;
+
+	for (i = 0; i < n; i++, s++) {
+		if (*s == '\n')
+			arc_serial_poll_putchar(port, '\r');
+		arc_serial_poll_putchar(port, *s);
+	}
+}
+
+static struct __initdata console arc_early_serial_console = {
+	.name = "early_ARCuart",
+	.write = early_serial_write,
+	.flags = CON_PRINTBUFFER | CON_BOOT,
+	.index = -1
+};
+
+static int arc_serial_probe_earlyprintk(struct platform_device *pdev)
+{
+	arc_early_serial_console.index = pdev->id;
+
+	arc_uart_init_one(pdev, &arc_uart_ports[pdev->id]);
+
+	arc_serial_console_setup(&arc_early_serial_console, NULL);
+
+	register_console(&arc_early_serial_console);
+	return 0;
+}
+#else
+static int arc_serial_probe_earlyprintk(struct platform_device *pdev)
+{
+	return -ENODEV;
+}
+#endif	/* CONFIG_SERIAL_ARC_CONSOLE */
+
+static int arc_serial_probe(struct platform_device *pdev)
+{
+	struct arc_uart_port *uart;
+	int rc;
+
+	if (is_early_platform_device(pdev))
+		return arc_serial_probe_earlyprintk(pdev);
+
+	uart = &arc_uart_ports[pdev->id];
+	rc = arc_uart_init_one(pdev, uart);
+	if (rc)
+		return rc;
+
+	return uart_add_one_port(&arc_uart_driver, &uart->port);
+}
+
+static int arc_serial_remove(struct platform_device *pdev)
+{
+	/* This will never be called */
+	return 0;
+}
+
+static struct platform_driver arc_platform_driver = {
+	.probe = arc_serial_probe,
+	.remove = arc_serial_remove,
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+	 },
+};
+
+#ifdef CONFIG_SERIAL_ARC_CONSOLE
+/*
+ * Register an early platform driver of "earlyprintk" class.
+ * ARCH platform code installs the driver and probes the early devices
+ * The installation could rely on user specifying earlyprintk=xyx in cmd line
+ * or it could be done independently, for all "earlyprintk" class drivers.
+ * [see arch/arc/plat-arcfpga/platform.c]
+ */
+early_platform_init("earlyprintk", &arc_platform_driver);
+
+#endif  /* CONFIG_SERIAL_ARC_CONSOLE */
+
+static int __init arc_serial_init(void)
+{
+	int ret;
+
+	ret = uart_register_driver(&arc_uart_driver);
+	if (ret)
+		return ret;
+
+	ret = platform_driver_register(&arc_platform_driver);
+	if (ret)
+		uart_unregister_driver(&arc_uart_driver);
+
+	return ret;
+}
+
+static void __exit arc_serial_exit(void)
+{
+	platform_driver_unregister(&arc_platform_driver);
+	uart_unregister_driver(&arc_uart_driver);
+}
+
+module_init(arc_serial_init);
+module_exit(arc_serial_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("plat-arcfpga/uart");
+MODULE_AUTHOR("Vineet Gupta");
+MODULE_DESCRIPTION("ARC(Synopsys) On-Chip(fpga) serial driver");
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 65f891be12d..b95886c1198 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1424,7 +1424,7 @@ static struct uart_ops atmel_pops = {
 #endif
 };
 
-static void __devinit atmel_of_init_port(struct atmel_uart_port *atmel_port,
+static void atmel_of_init_port(struct atmel_uart_port *atmel_port,
 					 struct device_node *np)
 {
 	u32 rs485_delay[2];
@@ -1459,7 +1459,7 @@ static void __devinit atmel_of_init_port(struct atmel_uart_port *atmel_port,
 /*
  * Configure the port from the platform device resource info.
  */
-static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port,
+static void atmel_init_port(struct atmel_uart_port *atmel_port,
 				      struct platform_device *pdev)
 {
 	struct uart_port *port = &atmel_port->uart;
@@ -1767,7 +1767,7 @@ static int atmel_serial_resume(struct platform_device *pdev)
 #define atmel_serial_resume NULL
 #endif
 
-static int __devinit atmel_serial_probe(struct platform_device *pdev)
+static int atmel_serial_probe(struct platform_device *pdev)
 {
 	struct atmel_uart_port *port;
 	struct device_node *np = pdev->dev.of_node;
@@ -1859,7 +1859,7 @@ err:
 	return ret;
 }
 
-static int __devexit atmel_serial_remove(struct platform_device *pdev)
+static int atmel_serial_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = platform_get_drvdata(pdev);
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
@@ -1884,7 +1884,7 @@ static int __devexit atmel_serial_remove(struct platform_device *pdev)
 
 static struct platform_driver atmel_serial_driver = {
 	.probe		= atmel_serial_probe,
-	.remove		= __devexit_p(atmel_serial_remove),
+	.remove		= atmel_serial_remove,
 	.suspend	= atmel_serial_suspend,
 	.resume		= atmel_serial_resume,
 	.driver		= {
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index c0b68b9cad9..c76a226080f 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -801,7 +801,7 @@ static struct uart_driver bcm_uart_driver = {
 /*
  * platform driver probe/remove callback
  */
-static int __devinit bcm_uart_probe(struct platform_device *pdev)
+static int bcm_uart_probe(struct platform_device *pdev)
 {
 	struct resource *res_mem, *res_irq;
 	struct uart_port *port;
@@ -848,7 +848,7 @@ static int __devinit bcm_uart_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit bcm_uart_remove(struct platform_device *pdev)
+static int bcm_uart_remove(struct platform_device *pdev)
 {
 	struct uart_port *port;
 
@@ -865,7 +865,7 @@ static int __devexit bcm_uart_remove(struct platform_device *pdev)
  */
 static struct platform_driver bcm_uart_platform_driver = {
 	.probe	= bcm_uart_probe,
-	.remove	= __devexit_p(bcm_uart_remove),
+	.remove	= bcm_uart_remove,
 	.driver	= {
 		.owner = THIS_MODULE,
 		.name  = "bcm63xx_uart",
diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c
index 7fbc3a08f10..f5d117379b6 100644
--- a/drivers/tty/serial/bfin_sport_uart.c
+++ b/drivers/tty/serial/bfin_sport_uart.c
@@ -740,7 +740,7 @@ static struct dev_pm_ops bfin_sport_uart_dev_pm_ops = {
 };
 #endif
 
-static int __devinit sport_uart_probe(struct platform_device *pdev)
+static int sport_uart_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	struct sport_uart_port *sport;
@@ -850,7 +850,7 @@ out_error_free_mem:
 	return ret;
 }
 
-static int __devexit sport_uart_remove(struct platform_device *pdev)
+static int sport_uart_remove(struct platform_device *pdev)
 {
 	struct sport_uart_port *sport = platform_get_drvdata(pdev);
 
@@ -871,7 +871,7 @@ static int __devexit sport_uart_remove(struct platform_device *pdev)
 
 static struct platform_driver sport_uart_driver = {
 	.probe		= sport_uart_probe,
-	.remove		= __devexit_p(sport_uart_remove),
+	.remove		= sport_uart_remove,
 	.driver		= {
 		.name	= DRV_NAME,
 #ifdef CONFIG_PM
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index 9242d56ba26..e6a008f4939 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -477,9 +477,9 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
 void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
 {
 	int x_pos, pos;
+	unsigned long flags;
 
-	dma_disable_irq_nosync(uart->rx_dma_channel);
-	spin_lock_bh(&uart->rx_lock);
+	spin_lock_irqsave(&uart->rx_lock, flags);
 
 	/* 2D DMA RX buffer ring is used. Because curr_y_count and
 	 * curr_x_count can't be read as an atomic operation,
@@ -510,8 +510,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
 		uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
 	}
 
-	spin_unlock_bh(&uart->rx_lock);
-	dma_enable_irq(uart->rx_dma_channel);
+	spin_unlock_irqrestore(&uart->rx_lock, flags);
 
 	mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES);
 }
@@ -800,6 +799,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 	unsigned long flags;
 	unsigned int baud, quot;
 	unsigned int ier, lcr = 0;
+	unsigned long timeout;
 
 	switch (termios->c_cflag & CSIZE) {
 	case CS8:
@@ -869,6 +869,14 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15);
 
+	/* Wait till the transfer buffer is empty */
+	timeout = jiffies + msecs_to_jiffies(10);
+	while (UART_GET_GCTL(uart) & UCEN && !(UART_GET_LSR(uart) & TEMT))
+		if (time_after(jiffies, timeout)) {
+			dev_warn(port->dev, "timeout waiting for TX buffer empty\n");
+			break;
+		}
+
 	/* Disable UART */
 	ier = UART_GET_IER(uart);
 	UART_PUT_GCTL(uart, UART_GET_GCTL(uart) & ~UCEN);
@@ -1390,7 +1398,7 @@ out_error_free_mem:
 	return ret;
 }
 
-static int __devexit bfin_serial_remove(struct platform_device *pdev)
+static int bfin_serial_remove(struct platform_device *pdev)
 {
 	struct bfin_serial_port *uart = platform_get_drvdata(pdev);
 
@@ -1410,7 +1418,7 @@ static int __devexit bfin_serial_remove(struct platform_device *pdev)
 
 static struct platform_driver bfin_serial_driver = {
 	.probe		= bfin_serial_probe,
-	.remove		= __devexit_p(bfin_serial_remove),
+	.remove		= bfin_serial_remove,
 	.suspend	= bfin_serial_suspend,
 	.resume		= bfin_serial_resume,
 	.driver		= {
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index d0f719fafc8..3fd2526d121 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -10,15 +10,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -26,172 +17,169 @@
 #endif
 
 #include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/spinlock.h>
 #include <linux/device.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
+#include <linux/console.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
 #include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
 
 #include <mach/hardware.h>
-#include <asm/irq.h>
-
-#define UART_NR		2
-
-#define SERIAL_CLPS711X_MAJOR	204
-#define SERIAL_CLPS711X_MINOR	40
-#define SERIAL_CLPS711X_NR	UART_NR
-
-/*
- * We use the relevant SYSCON register as a base address for these ports.
- */
-#define UBRLCR(port)		((port)->iobase + UBRLCR1 - SYSCON1)
-#define UARTDR(port)		((port)->iobase + UARTDR1 - SYSCON1)
-#define SYSFLG(port)		((port)->iobase + SYSFLG1 - SYSCON1)
-#define SYSCON(port)		((port)->iobase + SYSCON1 - SYSCON1)
-
-#define TX_IRQ(port)		((port)->irq)
-#define RX_IRQ(port)		((port)->irq + 1)
 
-#define UART_ANY_ERR		(UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR)
-
-#define tx_enabled(port)	((port)->unused[0])
+#define UART_CLPS711X_NAME	"uart-clps711x"
+#define UART_CLPS711X_NR	2
+#define UART_CLPS711X_MAJOR	204
+#define UART_CLPS711X_MINOR	40
+
+#define UBRLCR(port)		((port)->line ? UBRLCR2 : UBRLCR1)
+#define UARTDR(port)		((port)->line ? UARTDR2 : UARTDR1)
+#define SYSFLG(port)		((port)->line ? SYSFLG2 : SYSFLG1)
+#define SYSCON(port)		((port)->line ? SYSCON2 : SYSCON1)
+#define TX_IRQ(port)		((port)->line ? IRQ_UTXINT2 : IRQ_UTXINT1)
+#define RX_IRQ(port)		((port)->line ? IRQ_URXINT2 : IRQ_URXINT1)
+
+struct clps711x_port {
+	struct uart_driver	uart;
+	struct clk		*uart_clk;
+	struct uart_port	port[UART_CLPS711X_NR];
+	int			tx_enabled[UART_CLPS711X_NR];
+#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
+	struct console		console;
+#endif
+};
 
-static void clps711xuart_stop_tx(struct uart_port *port)
+static void uart_clps711x_stop_tx(struct uart_port *port)
 {
-	if (tx_enabled(port)) {
+	struct clps711x_port *s = dev_get_drvdata(port->dev);
+
+	if (s->tx_enabled[port->line]) {
 		disable_irq(TX_IRQ(port));
-		tx_enabled(port) = 0;
+		s->tx_enabled[port->line] = 0;
 	}
 }
 
-static void clps711xuart_start_tx(struct uart_port *port)
+static void uart_clps711x_start_tx(struct uart_port *port)
 {
-	if (!tx_enabled(port)) {
+	struct clps711x_port *s = dev_get_drvdata(port->dev);
+
+	if (!s->tx_enabled[port->line]) {
 		enable_irq(TX_IRQ(port));
-		tx_enabled(port) = 1;
+		s->tx_enabled[port->line] = 1;
 	}
 }
 
-static void clps711xuart_stop_rx(struct uart_port *port)
+static void uart_clps711x_stop_rx(struct uart_port *port)
 {
 	disable_irq(RX_IRQ(port));
 }
 
-static void clps711xuart_enable_ms(struct uart_port *port)
+static void uart_clps711x_enable_ms(struct uart_port *port)
 {
+	/* Do nothing */
 }
 
-static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id)
+static irqreturn_t uart_clps711x_int_rx(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct tty_struct *tty = port->state->port.tty;
+	struct tty_struct *tty = tty_port_tty_get(&port->state->port);
 	unsigned int status, ch, flg;
 
-	status = clps_readl(SYSFLG(port));
-	while (!(status & SYSFLG_URXFE)) {
-		ch = clps_readl(UARTDR(port));
+	if (!tty)
+		return IRQ_HANDLED;
 
-		port->icount.rx++;
+	for (;;) {
+		status = clps_readl(SYSFLG(port));
+		if (status & SYSFLG_URXFE)
+			break;
+
+		ch = clps_readw(UARTDR(port));
+		status = ch & (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR);
+		ch &= 0xff;
 
+		port->icount.rx++;
 		flg = TTY_NORMAL;
 
-		/*
-		 * Note that the error handling code is
-		 * out of the main execution path
-		 */
-		if (unlikely(ch & UART_ANY_ERR)) {
-			if (ch & UARTDR_PARERR)
+		if (unlikely(status)) {
+			if (status & UARTDR_PARERR)
 				port->icount.parity++;
-			else if (ch & UARTDR_FRMERR)
+			else if (status & UARTDR_FRMERR)
 				port->icount.frame++;
-			if (ch & UARTDR_OVERR)
+			else if (status & UARTDR_OVERR)
 				port->icount.overrun++;
 
-			ch &= port->read_status_mask;
+			status &= port->read_status_mask;
 
-			if (ch & UARTDR_PARERR)
+			if (status & UARTDR_PARERR)
 				flg = TTY_PARITY;
-			else if (ch & UARTDR_FRMERR)
+			else if (status & UARTDR_FRMERR)
 				flg = TTY_FRAME;
-
-#ifdef SUPPORT_SYSRQ
-			port->sysrq = 0;
-#endif
+			else if (status & UARTDR_OVERR)
+				flg = TTY_OVERRUN;
 		}
 
 		if (uart_handle_sysrq_char(port, ch))
-			goto ignore_char;
+			continue;
 
-		/*
-		 * CHECK: does overrun affect the current character?
-		 * ASSUMPTION: it does not.
-		 */
-		uart_insert_char(port, ch, UARTDR_OVERR, ch, flg);
+		if (status & port->ignore_status_mask)
+			continue;
 
-	ignore_char:
-		status = clps_readl(SYSFLG(port));
+		uart_insert_char(port, status, UARTDR_OVERR, ch, flg);
 	}
+
 	tty_flip_buffer_push(tty);
+
+	tty_kref_put(tty);
+
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id)
+static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
+	struct clps711x_port *s = dev_get_drvdata(port->dev);
 	struct circ_buf *xmit = &port->state->xmit;
-	int count;
 
 	if (port->x_char) {
-		clps_writel(port->x_char, UARTDR(port));
+		clps_writew(port->x_char, UARTDR(port));
 		port->icount.tx++;
 		port->x_char = 0;
 		return IRQ_HANDLED;
 	}
 
-	if (uart_circ_empty(xmit) || uart_tx_stopped(port))
-		goto disable_tx_irq;
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+		disable_irq_nosync(TX_IRQ(port));
+		s->tx_enabled[port->line] = 0;
+		return IRQ_HANDLED;
+	}
 
-	count = port->fifosize >> 1;
-	do {
-		clps_writel(xmit->buf[xmit->tail], UARTDR(port));
+	while (!uart_circ_empty(xmit)) {
+		clps_writew(xmit->buf[xmit->tail], UARTDR(port));
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		port->icount.tx++;
-		if (uart_circ_empty(xmit))
+		if (clps_readl(SYSFLG(port) & SYSFLG_UTXFF))
 			break;
-	} while (--count > 0);
+	}
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(port);
 
-	if (uart_circ_empty(xmit)) {
-	disable_tx_irq:
-		disable_irq_nosync(TX_IRQ(port));
-		tx_enabled(port) = 0;
-	}
-
 	return IRQ_HANDLED;
 }
 
-static unsigned int clps711xuart_tx_empty(struct uart_port *port)
+static unsigned int uart_clps711x_tx_empty(struct uart_port *port)
 {
-	unsigned int status = clps_readl(SYSFLG(port));
-	return status & SYSFLG_UBUSY ? 0 : TIOCSER_TEMT;
+	return (clps_readl(SYSFLG(port) & SYSFLG_UBUSY)) ? 0 : TIOCSER_TEMT;
 }
 
-static unsigned int clps711xuart_get_mctrl(struct uart_port *port)
+static unsigned int uart_clps711x_get_mctrl(struct uart_port *port)
 {
-	unsigned int port_addr;
-	unsigned int result = 0;
-	unsigned int status;
+	unsigned int status, result = 0;
 
-	port_addr = SYSFLG(port);
-	if (port_addr == SYSFLG1) {
+	if (port->line == 0) {
 		status = clps_readl(SYSFLG1);
 		if (status & SYSFLG1_DCD)
 			result |= TIOCM_CAR;
@@ -199,104 +187,86 @@ static unsigned int clps711xuart_get_mctrl(struct uart_port *port)
 			result |= TIOCM_DSR;
 		if (status & SYSFLG1_CTS)
 			result |= TIOCM_CTS;
-	}
+	} else
+		result = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR;
 
 	return result;
 }
 
-static void
-clps711xuart_set_mctrl_null(struct uart_port *port, unsigned int mctrl)
+static void uart_clps711x_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
+	/* Do nothing */
 }
 
-static void clps711xuart_break_ctl(struct uart_port *port, int break_state)
+static void uart_clps711x_break_ctl(struct uart_port *port, int break_state)
 {
 	unsigned long flags;
 	unsigned int ubrlcr;
 
 	spin_lock_irqsave(&port->lock, flags);
+
 	ubrlcr = clps_readl(UBRLCR(port));
-	if (break_state == -1)
+	if (break_state)
 		ubrlcr |= UBRLCR_BREAK;
 	else
 		ubrlcr &= ~UBRLCR_BREAK;
 	clps_writel(ubrlcr, UBRLCR(port));
+
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
-static int clps711xuart_startup(struct uart_port *port)
+static int uart_clps711x_startup(struct uart_port *port)
 {
-	unsigned int syscon;
-	int retval;
-
-	tx_enabled(port) = 1;
-
-	/*
-	 * Allocate the IRQs
-	 */
-	retval = request_irq(TX_IRQ(port), clps711xuart_int_tx, 0,
-			     "clps711xuart_tx", port);
-	if (retval)
-		return retval;
-
-	retval = request_irq(RX_IRQ(port), clps711xuart_int_rx, 0,
-			     "clps711xuart_rx", port);
-	if (retval) {
-		free_irq(TX_IRQ(port), port);
-		return retval;
+	struct clps711x_port *s = dev_get_drvdata(port->dev);
+	int ret;
+
+	s->tx_enabled[port->line] = 1;
+	/* Allocate the IRQs */
+	ret = devm_request_irq(port->dev, TX_IRQ(port), uart_clps711x_int_tx,
+			       0, UART_CLPS711X_NAME " TX", port);
+	if (ret)
+		return ret;
+
+	ret = devm_request_irq(port->dev, RX_IRQ(port), uart_clps711x_int_rx,
+			       0, UART_CLPS711X_NAME " RX", port);
+	if (ret) {
+		devm_free_irq(port->dev, TX_IRQ(port), port);
+		return ret;
 	}
 
-	/*
-	 * enable the port
-	 */
-	syscon = clps_readl(SYSCON(port));
-	syscon |= SYSCON_UARTEN;
-	clps_writel(syscon, SYSCON(port));
+	/* Disable break */
+	clps_writel(clps_readl(UBRLCR(port)) & ~UBRLCR_BREAK, UBRLCR(port));
+
+	/* Enable the port */
+	clps_writel(clps_readl(SYSCON(port)) | SYSCON_UARTEN, SYSCON(port));
 
 	return 0;
 }
 
-static void clps711xuart_shutdown(struct uart_port *port)
+static void uart_clps711x_shutdown(struct uart_port *port)
 {
-	unsigned int ubrlcr, syscon;
+	/* Free the interrupts */
+	devm_free_irq(port->dev, TX_IRQ(port), port);
+	devm_free_irq(port->dev, RX_IRQ(port), port);
 
-	/*
-	 * Free the interrupt
-	 */
-	free_irq(TX_IRQ(port), port);	/* TX interrupt */
-	free_irq(RX_IRQ(port), port);	/* RX interrupt */
-
-	/*
-	 * disable the port
-	 */
-	syscon = clps_readl(SYSCON(port));
-	syscon &= ~SYSCON_UARTEN;
-	clps_writel(syscon, SYSCON(port));
-
-	/*
-	 * disable break condition and fifos
-	 */
-	ubrlcr = clps_readl(UBRLCR(port));
-	ubrlcr &= ~(UBRLCR_FIFOEN | UBRLCR_BREAK);
-	clps_writel(ubrlcr, UBRLCR(port));
+	/* Disable the port */
+	clps_writel(clps_readl(SYSCON(port)) & ~SYSCON_UARTEN, SYSCON(port));
 }
 
-static void
-clps711xuart_set_termios(struct uart_port *port, struct ktermios *termios,
-			 struct ktermios *old)
+static void uart_clps711x_set_termios(struct uart_port *port,
+				      struct ktermios *termios,
+				      struct ktermios *old)
 {
 	unsigned int ubrlcr, baud, quot;
 	unsigned long flags;
 
-	/*
-	 * We don't implement CREAD.
-	 */
-	termios->c_cflag |= CREAD;
+	/* Mask termios capabilities we don't support */
+	termios->c_cflag &= ~CMSPAR;
+	termios->c_iflag &= ~(BRKINT | IGNBRK);
 
-	/*
-	 * Ask the core to calculate the divisor for us.
-	 */
-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 
+	/* Ask the core to calculate the divisor for us */
+	baud = uart_get_baud_rate(port, termios, old, port->uartclk / 4096,
+						      port->uartclk / 16);
 	quot = uart_get_divisor(port, baud);
 
 	switch (termios->c_cflag & CSIZE) {
@@ -309,160 +279,117 @@ clps711xuart_set_termios(struct uart_port *port, struct ktermios *termios,
 	case CS7:
 		ubrlcr = UBRLCR_WRDLEN7;
 		break;
-	default: // CS8
+	case CS8:
+	default:
 		ubrlcr = UBRLCR_WRDLEN8;
 		break;
 	}
+
 	if (termios->c_cflag & CSTOPB)
 		ubrlcr |= UBRLCR_XSTOP;
+
 	if (termios->c_cflag & PARENB) {
 		ubrlcr |= UBRLCR_PRTEN;
 		if (!(termios->c_cflag & PARODD))
 			ubrlcr |= UBRLCR_EVENPRT;
 	}
-	if (port->fifosize > 1)
-		ubrlcr |= UBRLCR_FIFOEN;
 
-	spin_lock_irqsave(&port->lock, flags);
+	/* Enable FIFO */
+	ubrlcr |= UBRLCR_FIFOEN;
 
-	/*
-	 * Update the per-port timeout.
-	 */
-	uart_update_timeout(port, termios->c_cflag, baud);
+	spin_lock_irqsave(&port->lock, flags);
 
+	/* Set read status mask */
 	port->read_status_mask = UARTDR_OVERR;
 	if (termios->c_iflag & INPCK)
 		port->read_status_mask |= UARTDR_PARERR | UARTDR_FRMERR;
 
-	/*
-	 * Characters to ignore
-	 */
+	/* Set status ignore mask */
 	port->ignore_status_mask = 0;
-	if (termios->c_iflag & IGNPAR)
-		port->ignore_status_mask |= UARTDR_FRMERR | UARTDR_PARERR;
-	if (termios->c_iflag & IGNBRK) {
-		/*
-		 * If we're ignoring parity and break indicators,
-		 * ignore overruns to (for real raw support).
-		 */
-		if (termios->c_iflag & IGNPAR)
-			port->ignore_status_mask |= UARTDR_OVERR;
-	}
+	if (!(termios->c_cflag & CREAD))
+		port->ignore_status_mask |= UARTDR_OVERR | UARTDR_PARERR |
+					    UARTDR_FRMERR;
 
-	quot -= 1;
+	uart_update_timeout(port, termios->c_cflag, baud);
 
-	clps_writel(ubrlcr | quot, UBRLCR(port));
+	clps_writel(ubrlcr | (quot - 1), UBRLCR(port));
 
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
-static const char *clps711xuart_type(struct uart_port *port)
+static const char *uart_clps711x_type(struct uart_port *port)
 {
-	return port->type == PORT_CLPS711X ? "CLPS711x" : NULL;
+	return (port->type == PORT_CLPS711X) ? "CLPS711X" : NULL;
 }
 
-/*
- * Configure/autoconfigure the port.
- */
-static void clps711xuart_config_port(struct uart_port *port, int flags)
+static void uart_clps711x_config_port(struct uart_port *port, int flags)
 {
 	if (flags & UART_CONFIG_TYPE)
 		port->type = PORT_CLPS711X;
 }
 
-static void clps711xuart_release_port(struct uart_port *port)
+static void uart_clps711x_release_port(struct uart_port *port)
 {
+	/* Do nothing */
 }
 
-static int clps711xuart_request_port(struct uart_port *port)
+static int uart_clps711x_request_port(struct uart_port *port)
 {
+	/* Do nothing */
 	return 0;
 }
 
-static struct uart_ops clps711x_pops = {
-	.tx_empty	= clps711xuart_tx_empty,
-	.set_mctrl	= clps711xuart_set_mctrl_null,
-	.get_mctrl	= clps711xuart_get_mctrl,
-	.stop_tx	= clps711xuart_stop_tx,
-	.start_tx	= clps711xuart_start_tx,
-	.stop_rx	= clps711xuart_stop_rx,
-	.enable_ms	= clps711xuart_enable_ms,
-	.break_ctl	= clps711xuart_break_ctl,
-	.startup	= clps711xuart_startup,
-	.shutdown	= clps711xuart_shutdown,
-	.set_termios	= clps711xuart_set_termios,
-	.type		= clps711xuart_type,
-	.config_port	= clps711xuart_config_port,
-	.release_port	= clps711xuart_release_port,
-	.request_port	= clps711xuart_request_port,
-};
-
-static struct uart_port clps711x_ports[UART_NR] = {
-	{
-		.iobase		= SYSCON1,
-		.irq		= IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */
-		.uartclk	= 3686400,
-		.fifosize	= 16,
-		.ops		= &clps711x_pops,
-		.line		= 0,
-		.flags		= UPF_BOOT_AUTOCONF,
-	},
-	{
-		.iobase		= SYSCON2,
-		.irq		= IRQ_UTXINT2, /* IRQ_URXINT2 */
-		.uartclk	= 3686400,
-		.fifosize	= 16,
-		.ops		= &clps711x_pops,
-		.line		= 1,
-		.flags		= UPF_BOOT_AUTOCONF,
-	}
+static const struct uart_ops uart_clps711x_ops = {
+	.tx_empty	= uart_clps711x_tx_empty,
+	.set_mctrl	= uart_clps711x_set_mctrl,
+	.get_mctrl	= uart_clps711x_get_mctrl,
+	.stop_tx	= uart_clps711x_stop_tx,
+	.start_tx	= uart_clps711x_start_tx,
+	.stop_rx	= uart_clps711x_stop_rx,
+	.enable_ms	= uart_clps711x_enable_ms,
+	.break_ctl	= uart_clps711x_break_ctl,
+	.startup	= uart_clps711x_startup,
+	.shutdown	= uart_clps711x_shutdown,
+	.set_termios	= uart_clps711x_set_termios,
+	.type		= uart_clps711x_type,
+	.config_port	= uart_clps711x_config_port,
+	.release_port	= uart_clps711x_release_port,
+	.request_port	= uart_clps711x_request_port,
 };
 
 #ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
-static void clps711xuart_console_putchar(struct uart_port *port, int ch)
+static void uart_clps711x_console_putchar(struct uart_port *port, int ch)
 {
 	while (clps_readl(SYSFLG(port)) & SYSFLG_UTXFF)
 		barrier();
-	clps_writel(ch, UARTDR(port));
+
+	clps_writew(ch, UARTDR(port));
 }
 
-/*
- *	Print a string to the serial port trying not to disturb
- *	any possible real use of the port...
- *
- *	The console_lock must be held when we get here.
- *
- *	Note that this is called with interrupts already disabled
- */
-static void
-clps711xuart_console_write(struct console *co, const char *s,
-			   unsigned int count)
+static void uart_clps711x_console_write(struct console *co, const char *c,
+					unsigned n)
 {
-	struct uart_port *port = clps711x_ports + co->index;
-	unsigned int status, syscon;
+	struct clps711x_port *s = (struct clps711x_port *)co->data;
+	struct uart_port *port = &s->port[co->index];
+	u32 syscon;
 
-	/*
-	 *	Ensure that the port is enabled.
-	 */
+	/* Ensure that the port is enabled */
 	syscon = clps_readl(SYSCON(port));
 	clps_writel(syscon | SYSCON_UARTEN, SYSCON(port));
 
-	uart_console_write(port, s, count, clps711xuart_console_putchar);
+	uart_console_write(port, c, n, uart_clps711x_console_putchar);
 
-	/*
-	 *	Finally, wait for transmitter to become empty
-	 *	and restore the uart state.
-	 */
-	do {
-		status = clps_readl(SYSFLG(port));
-	} while (status & SYSFLG_UBUSY);
+	/* Wait for transmitter to become empty */
+	while (clps_readl(SYSFLG(port)) & SYSFLG_UBUSY)
+		barrier();
 
+	/* Restore the uart state */
 	clps_writel(syscon, SYSCON(port));
 }
 
-static void __init
-clps711xuart_console_get_options(struct uart_port *port, int *baud,
-				 int *parity, int *bits)
+static void uart_clps711x_console_get_options(struct uart_port *port,
+					      int *baud, int *parity,
+					      int *bits)
 {
 	if (clps_readl(SYSCON(port)) & SYSCON_UARTEN) {
 		unsigned int ubrlcr, quot;
@@ -487,92 +414,124 @@ clps711xuart_console_get_options(struct uart_port *port, int *baud,
 	}
 }
 
-static int __init clps711xuart_console_setup(struct console *co, char *options)
+static int uart_clps711x_console_setup(struct console *co, char *options)
 {
-	struct uart_port *port;
-	int baud = 38400;
-	int bits = 8;
-	int parity = 'n';
-	int flow = 'n';
-
-	/*
-	 * Check whether an invalid uart number has been specified, and
-	 * if so, search for the first available port that does have
-	 * console support.
-	 */
-	port = uart_get_console(clps711x_ports, UART_NR, co);
+	int baud = 38400, bits = 8, parity = 'n', flow = 'n';
+	struct clps711x_port *s = (struct clps711x_port *)co->data;
+	struct uart_port *port = &s->port[(co->index > 0) ? co->index : 0];
 
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
 	else
-		clps711xuart_console_get_options(port, &baud, &parity, &bits);
+		uart_clps711x_console_get_options(port, &baud, &parity, &bits);
 
 	return uart_set_options(port, co, baud, parity, bits, flow);
 }
+#endif
 
-static struct uart_driver clps711x_reg;
-static struct console clps711x_console = {
-	.name		= "ttyCL",
-	.write		= clps711xuart_console_write,
-	.device		= uart_console_device,
-	.setup		= clps711xuart_console_setup,
-	.flags		= CON_PRINTBUFFER,
-	.index		= -1,
-	.data		= &clps711x_reg,
-};
-
-static int __init clps711xuart_console_init(void)
+static int uart_clps711x_probe(struct platform_device *pdev)
 {
-	register_console(&clps711x_console);
-	return 0;
-}
-console_initcall(clps711xuart_console_init);
+	struct clps711x_port *s;
+	int ret, i;
+
+	s = devm_kzalloc(&pdev->dev, sizeof(struct clps711x_port), GFP_KERNEL);
+	if (!s) {
+		dev_err(&pdev->dev, "Error allocating port structure\n");
+		return -ENOMEM;
+	}
+	platform_set_drvdata(pdev, s);
 
-#define CLPS711X_CONSOLE	&clps711x_console
-#else
-#define CLPS711X_CONSOLE	NULL
+	s->uart_clk = devm_clk_get(&pdev->dev, "uart");
+	if (IS_ERR(s->uart_clk)) {
+		dev_err(&pdev->dev, "Can't get UART clocks\n");
+		ret = PTR_ERR(s->uart_clk);
+		goto err_out;
+	}
+
+	s->uart.owner		= THIS_MODULE;
+	s->uart.dev_name	= "ttyCL";
+	s->uart.major		= UART_CLPS711X_MAJOR;
+	s->uart.minor		= UART_CLPS711X_MINOR;
+	s->uart.nr		= UART_CLPS711X_NR;
+#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
+	s->uart.cons		= &s->console;
+	s->uart.cons->device	= uart_console_device;
+	s->uart.cons->write	= uart_clps711x_console_write;
+	s->uart.cons->setup	= uart_clps711x_console_setup;
+	s->uart.cons->flags	= CON_PRINTBUFFER;
+	s->uart.cons->index	= -1;
+	s->uart.cons->data	= s;
+	strcpy(s->uart.cons->name, "ttyCL");
 #endif
+	ret = uart_register_driver(&s->uart);
+	if (ret) {
+		dev_err(&pdev->dev, "Registering UART driver failed\n");
+		devm_clk_put(&pdev->dev, s->uart_clk);
+		goto err_out;
+	}
 
-static struct uart_driver clps711x_reg = {
-	.driver_name		= "ttyCL",
-	.dev_name		= "ttyCL",
-	.major			= SERIAL_CLPS711X_MAJOR,
-	.minor			= SERIAL_CLPS711X_MINOR,
-	.nr			= UART_NR,
+	for (i = 0; i < UART_CLPS711X_NR; i++) {
+		s->port[i].line		= i;
+		s->port[i].dev		= &pdev->dev;
+		s->port[i].irq		= TX_IRQ(&s->port[i]);
+		s->port[i].iobase	= SYSCON(&s->port[i]);
+		s->port[i].type		= PORT_CLPS711X;
+		s->port[i].fifosize	= 16;
+		s->port[i].flags	= UPF_SKIP_TEST | UPF_FIXED_TYPE;
+		s->port[i].uartclk	= clk_get_rate(s->uart_clk);
+		s->port[i].ops		= &uart_clps711x_ops;
+		WARN_ON(uart_add_one_port(&s->uart, &s->port[i]));
+	}
 
-	.cons			= CLPS711X_CONSOLE,
-};
+	return 0;
 
-static int __init clps711xuart_init(void)
-{
-	int ret, i;
+err_out:
+	platform_set_drvdata(pdev, NULL);
 
-	printk(KERN_INFO "Serial: CLPS711x driver\n");
+	return ret;
+}
 
-	ret = uart_register_driver(&clps711x_reg);
-	if (ret)
-		return ret;
+static int uart_clps711x_remove(struct platform_device *pdev)
+{
+	struct clps711x_port *s = platform_get_drvdata(pdev);
+	int i;
 
-	for (i = 0; i < UART_NR; i++)
-		uart_add_one_port(&clps711x_reg, &clps711x_ports[i]);
+	for (i = 0; i < UART_CLPS711X_NR; i++)
+		uart_remove_one_port(&s->uart, &s->port[i]);
+
+	devm_clk_put(&pdev->dev, s->uart_clk);
+	uart_unregister_driver(&s->uart);
+	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }
 
-static void __exit clps711xuart_exit(void)
-{
-	int i;
+static struct platform_driver clps711x_uart_driver = {
+	.driver = {
+		.name	= UART_CLPS711X_NAME,
+		.owner	= THIS_MODULE,
+	},
+	.probe	= uart_clps711x_probe,
+	.remove	= uart_clps711x_remove,
+};
+module_platform_driver(clps711x_uart_driver);
 
-	for (i = 0; i < UART_NR; i++)
-		uart_remove_one_port(&clps711x_reg, &clps711x_ports[i]);
+static struct platform_device clps711x_uart_device = {
+	.name	= UART_CLPS711X_NAME,
+};
 
-	uart_unregister_driver(&clps711x_reg);
+static int __init uart_clps711x_init(void)
+{
+	return platform_device_register(&clps711x_uart_device);
 }
+module_init(uart_clps711x_init);
 
-module_init(clps711xuart_init);
-module_exit(clps711xuart_exit);
+static void __exit uart_clps711x_exit(void)
+{
+	platform_device_unregister(&clps711x_uart_device);
+}
+module_exit(uart_clps711x_exit);
 
 MODULE_AUTHOR("Deep Blue Solutions Ltd");
-MODULE_DESCRIPTION("CLPS-711x generic serial driver");
+MODULE_DESCRIPTION("CLPS711X serial driver");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS_CHARDEV(SERIAL_CLPS711X_MAJOR, SERIAL_CLPS711X_MINOR);
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index d0dd9194cec..ad0caf17680 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -1373,7 +1373,7 @@ static struct uart_driver cpm_reg = {
 
 static int probe_index;
 
-static int __devinit cpm_uart_probe(struct platform_device *ofdev)
+static int cpm_uart_probe(struct platform_device *ofdev)
 {
 	int index = probe_index++;
 	struct uart_cpm_port *pinfo = &cpm_uart_ports[index];
@@ -1396,7 +1396,7 @@ static int __devinit cpm_uart_probe(struct platform_device *ofdev)
 	return uart_add_one_port(&cpm_reg, &pinfo->port);
 }
 
-static int __devexit cpm_uart_remove(struct platform_device *ofdev)
+static int cpm_uart_remove(struct platform_device *ofdev)
 {
 	struct uart_cpm_port *pinfo = dev_get_drvdata(&ofdev->dev);
 	return uart_remove_one_port(&cpm_reg, &pinfo->port);
diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c
index 615e4647049..a8cbb267052 100644
--- a/drivers/tty/serial/efm32-uart.c
+++ b/drivers/tty/serial/efm32-uart.c
@@ -690,7 +690,7 @@ static int efm32_uart_probe_dt(struct platform_device *pdev,
 
 }
 
-static int __devinit efm32_uart_probe(struct platform_device *pdev)
+static int efm32_uart_probe(struct platform_device *pdev)
 {
 	struct efm32_uart_port *efm_port;
 	struct resource *res;
@@ -764,7 +764,7 @@ err_get_base:
 	return ret;
 }
 
-static int __devexit efm32_uart_remove(struct platform_device *pdev)
+static int efm32_uart_remove(struct platform_device *pdev)
 {
 	struct efm32_uart_port *efm_port = platform_get_drvdata(pdev);
 
@@ -791,7 +791,7 @@ MODULE_DEVICE_TABLE(of, efm32_uart_dt_ids);
 
 static struct platform_driver efm32_uart_driver = {
 	.probe = efm32_uart_probe,
-	.remove = __devexit_p(efm32_uart_remove),
+	.remove = efm32_uart_remove,
 
 	.driver = {
 		.name = DRIVER_NAME,
diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
index defc4e3393a..6197a69adb4 100644
--- a/drivers/tty/serial/icom.c
+++ b/drivers/tty/serial/icom.c
@@ -175,7 +175,7 @@ static void free_port_memory(struct icom_port *icom_port)
 	}
 }
 
-static int __devinit get_port_memory(struct icom_port *icom_port)
+static int get_port_memory(struct icom_port *icom_port)
 {
 	int index;
 	unsigned long stgAddr;
@@ -1314,7 +1314,7 @@ static struct uart_driver icom_uart_driver = {
 	.cons = ICOM_CONSOLE,
 };
 
-static int __devinit icom_init_ports(struct icom_adapter *icom_adapter)
+static int icom_init_ports(struct icom_adapter *icom_adapter)
 {
 	u32 subsystem_id = icom_adapter->subsystem_id;
 	int i;
@@ -1381,7 +1381,7 @@ static void icom_port_active(struct icom_port *icom_port, struct icom_adapter *i
 			    0x8024 + 2 - 2 * (icom_port->port - 2);
 	}
 }
-static int __devinit icom_load_ports(struct icom_adapter *icom_adapter)
+static int icom_load_ports(struct icom_adapter *icom_adapter)
 {
 	struct icom_port *icom_port;
 	int port_num;
@@ -1407,7 +1407,7 @@ static int __devinit icom_load_ports(struct icom_adapter *icom_adapter)
 	return 0;
 }
 
-static int __devinit icom_alloc_adapter(struct icom_adapter
+static int icom_alloc_adapter(struct icom_adapter
 					**icom_adapter_ref)
 {
 	int adapter_count = 0;
@@ -1487,7 +1487,7 @@ static void icom_kref_release(struct kref *kref)
 	icom_remove_adapter(icom_adapter);
 }
 
-static int __devinit icom_probe(struct pci_dev *dev,
+static int icom_probe(struct pci_dev *dev,
 				const struct pci_device_id *ent)
 {
 	int index;
@@ -1596,7 +1596,7 @@ probe_exit0:
 	return retval;
 }
 
-static void __devexit icom_remove(struct pci_dev *dev)
+static void icom_remove(struct pci_dev *dev)
 {
 	struct icom_adapter *icom_adapter;
 	struct list_head *tmp;
@@ -1617,7 +1617,7 @@ static struct pci_driver icom_pci_driver = {
 	.name = ICOM_DRIVER_NAME,
 	.id_table = icom_pci_table,
 	.probe = icom_probe,
-	.remove = __devexit_p(icom_remove),
+	.remove = icom_remove,
 };
 
 static int __init icom_init(void)
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index 5b9bc19ed13..675d94ab0af 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -60,20 +60,27 @@
 #include <linux/pm_runtime.h>
 #include <linux/spi/ifx_modem.h>
 #include <linux/delay.h>
+#include <linux/reboot.h>
 
 #include "ifx6x60.h"
 
 #define IFX_SPI_MORE_MASK		0x10
-#define IFX_SPI_MORE_BIT		12	/* bit position in u16 */
-#define IFX_SPI_CTS_BIT			13	/* bit position in u16 */
+#define IFX_SPI_MORE_BIT		4	/* bit position in u8 */
+#define IFX_SPI_CTS_BIT			6	/* bit position in u8 */
 #define IFX_SPI_MODE			SPI_MODE_1
 #define IFX_SPI_TTY_ID			0
 #define IFX_SPI_TIMEOUT_SEC		2
 #define IFX_SPI_HEADER_0		(-1)
 #define IFX_SPI_HEADER_F		(-2)
 
+#define PO_POST_DELAY		200
+#define IFX_MDM_RST_PMU	4
+
 /* forward reference */
 static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev);
+static int ifx_modem_reboot_callback(struct notifier_block *nfb,
+				unsigned long event, void *data);
+static int ifx_modem_power_off(struct ifx_spi_device *ifx_dev);
 
 /* local variables */
 static int spi_bpw = 16;		/* 8, 16 or 32 bit word length */
@@ -81,6 +88,29 @@ static struct tty_driver *tty_drv;
 static struct ifx_spi_device *saved_ifx_dev;
 static struct lock_class_key ifx_spi_key;
 
+static struct notifier_block ifx_modem_reboot_notifier_block = {
+	.notifier_call = ifx_modem_reboot_callback,
+};
+
+static int ifx_modem_power_off(struct ifx_spi_device *ifx_dev)
+{
+	gpio_set_value(IFX_MDM_RST_PMU, 1);
+	msleep(PO_POST_DELAY);
+
+	return 0;
+}
+
+static int ifx_modem_reboot_callback(struct notifier_block *nfb,
+				 unsigned long event, void *data)
+{
+	if (saved_ifx_dev)
+		ifx_modem_power_off(saved_ifx_dev);
+	else
+		pr_warn("no ifx modem active;\n");
+
+	return NOTIFY_OK;
+}
+
 /* GPIO/GPE settings */
 
 /**
@@ -152,26 +182,67 @@ ifx_spi_power_state_clear(struct ifx_spi_device *ifx_dev, unsigned char val)
 }
 
 /**
- *	swap_buf
+ *	swap_buf_8
  *	@buf: our buffer
  *	@len : number of bytes (not words) in the buffer
  *	@end: end of buffer
  *
  *	Swap the contents of a buffer into big endian format
  */
-static inline void swap_buf(u16 *buf, int len, void *end)
+static inline void swap_buf_8(unsigned char *buf, int len, void *end)
+{
+	/* don't swap buffer if SPI word width is 8 bits */
+	return;
+}
+
+/**
+ *	swap_buf_16
+ *	@buf: our buffer
+ *	@len : number of bytes (not words) in the buffer
+ *	@end: end of buffer
+ *
+ *	Swap the contents of a buffer into big endian format
+ */
+static inline void swap_buf_16(unsigned char *buf, int len, void *end)
 {
 	int n;
 
+	u16 *buf_16 = (u16 *)buf;
 	len = ((len + 1) >> 1);
-	if ((void *)&buf[len] > end) {
-		pr_err("swap_buf: swap exceeds boundary (%p > %p)!",
-		       &buf[len], end);
+	if ((void *)&buf_16[len] > end) {
+		pr_err("swap_buf_16: swap exceeds boundary (%p > %p)!",
+		       &buf_16[len], end);
+		return;
+	}
+	for (n = 0; n < len; n++) {
+		*buf_16 = cpu_to_be16(*buf_16);
+		buf_16++;
+	}
+}
+
+/**
+ *	swap_buf_32
+ *	@buf: our buffer
+ *	@len : number of bytes (not words) in the buffer
+ *	@end: end of buffer
+ *
+ *	Swap the contents of a buffer into big endian format
+ */
+static inline void swap_buf_32(unsigned char *buf, int len, void *end)
+{
+	int n;
+
+	u32 *buf_32 = (u32 *)buf;
+	len = (len + 3) >> 2;
+
+	if ((void *)&buf_32[len] > end) {
+		pr_err("swap_buf_32: swap exceeds boundary (%p > %p)!\n",
+		       &buf_32[len], end);
 		return;
 	}
 	for (n = 0; n < len; n++) {
-		*buf = cpu_to_be16(*buf);
-		buf++;
+		*buf_32 = cpu_to_be32(*buf_32);
+		buf_32++;
 	}
 }
 
@@ -190,9 +261,7 @@ static void mrdy_assert(struct ifx_spi_device *ifx_dev)
 	if (!val) {
 		if (!test_and_set_bit(IFX_SPI_STATE_TIMER_PENDING,
 				      &ifx_dev->flags)) {
-			ifx_dev->spi_timer.expires =
-				jiffies + IFX_SPI_TIMEOUT_SEC*HZ;
-			add_timer(&ifx_dev->spi_timer);
+			mod_timer(&ifx_dev->spi_timer,jiffies + IFX_SPI_TIMEOUT_SEC*HZ);
 
 		}
 	}
@@ -449,7 +518,7 @@ static int ifx_spi_prepare_tx_buffer(struct ifx_spi_device *ifx_dev)
 					tx_count-IFX_SPI_HEADER_OVERHEAD,
 					ifx_dev->spi_more);
 	/* swap actual data in the buffer */
-	swap_buf((u16 *)(ifx_dev->tx_buffer), tx_count,
+	ifx_dev->swap_buf((ifx_dev->tx_buffer), tx_count,
 		&ifx_dev->tx_buffer[IFX_SPI_TRANSFER_SIZE]);
 	return tx_count;
 }
@@ -469,9 +538,17 @@ static int ifx_spi_write(struct tty_struct *tty, const unsigned char *buf,
 {
 	struct ifx_spi_device *ifx_dev = tty->driver_data;
 	unsigned char *tmp_buf = (unsigned char *)buf;
-	int tx_count = kfifo_in_locked(&ifx_dev->tx_fifo, tmp_buf, count,
-				   &ifx_dev->fifo_lock);
-	mrdy_assert(ifx_dev);
+	unsigned long flags;
+	bool is_fifo_empty;
+	int tx_count;
+
+	spin_lock_irqsave(&ifx_dev->fifo_lock, flags);
+	is_fifo_empty = kfifo_is_empty(&ifx_dev->tx_fifo);
+	tx_count = kfifo_in(&ifx_dev->tx_fifo, tmp_buf, count);
+	spin_unlock_irqrestore(&ifx_dev->fifo_lock, flags);
+	if (is_fifo_empty)
+		mrdy_assert(ifx_dev);
+
 	return tx_count;
 }
 
@@ -530,12 +607,19 @@ static int ifx_port_activate(struct tty_port *port, struct tty_struct *tty)
 	/* clear any old data; can't do this in 'close' */
 	kfifo_reset(&ifx_dev->tx_fifo);
 
+	/* clear any flag which may be set in port shutdown procedure */
+	clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags);
+	clear_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags);
+
 	/* put port data into this tty */
 	tty->driver_data = ifx_dev;
 
 	/* allows flip string push from int context */
 	tty->low_latency = 1;
 
+	/* set flag to allows data transfer */
+	set_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags);
+
 	return 0;
 }
 
@@ -551,6 +635,7 @@ static void ifx_port_shutdown(struct tty_port *port)
 	struct ifx_spi_device *ifx_dev =
 		container_of(port, struct ifx_spi_device, tty_port);
 
+	clear_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags);
 	mrdy_set_low(ifx_dev);
 	clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags);
 	tasklet_kill(&ifx_dev->io_work_tasklet);
@@ -617,7 +702,7 @@ static void ifx_spi_complete(void *ctx)
 
 	if (!ifx_dev->spi_msg.status) {
 		/* check header validity, get comm flags */
-		swap_buf((u16 *)ifx_dev->rx_buffer, IFX_SPI_HEADER_OVERHEAD,
+		ifx_dev->swap_buf(ifx_dev->rx_buffer, IFX_SPI_HEADER_OVERHEAD,
 			&ifx_dev->rx_buffer[IFX_SPI_HEADER_OVERHEAD]);
 		decode_result = ifx_spi_decode_spi_header(ifx_dev->rx_buffer,
 				&length, &more, &cts);
@@ -636,7 +721,8 @@ static void ifx_spi_complete(void *ctx)
 
 		actual_length = min((unsigned int)length,
 					ifx_dev->spi_msg.actual_length);
-		swap_buf((u16 *)(ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD),
+		ifx_dev->swap_buf(
+			(ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD),
 			 actual_length,
 			 &ifx_dev->rx_buffer[IFX_SPI_TRANSFER_SIZE]);
 		ifx_spi_insert_flip_string(
@@ -705,7 +791,8 @@ static void ifx_spi_io(unsigned long data)
 	int retval;
 	struct ifx_spi_device *ifx_dev = (struct ifx_spi_device *) data;
 
-	if (!test_and_set_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags)) {
+	if (!test_and_set_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags) &&
+		test_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags)) {
 		if (ifx_dev->gpio.unack_srdy_int_nb > 0)
 			ifx_dev->gpio.unack_srdy_int_nb--;
 
@@ -773,6 +860,7 @@ static void ifx_spi_free_port(struct ifx_spi_device *ifx_dev)
 {
 	if (ifx_dev->tty_dev)
 		tty_unregister_device(tty_drv, ifx_dev->minor);
+	tty_port_destroy(&ifx_dev->tty_port);
 	kfifo_free(&ifx_dev->tx_fifo);
 }
 
@@ -806,10 +894,12 @@ static int ifx_spi_create_port(struct ifx_spi_device *ifx_dev)
 		dev_dbg(&ifx_dev->spi_dev->dev,
 			"%s: registering tty device failed", __func__);
 		ret = PTR_ERR(ifx_dev->tty_dev);
-		goto error_ret;
+		goto error_port;
 	}
 	return 0;
 
+error_port:
+	tty_port_destroy(pport);
 error_ret:
 	ifx_spi_free_port(ifx_dev);
 	return ret;
@@ -826,7 +916,7 @@ error_ret:
 static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev)
 {
 	if (test_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags)) {
-		del_timer_sync(&ifx_dev->spi_timer);
+		del_timer(&ifx_dev->spi_timer);
 		clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags);
 	}
 
@@ -1001,6 +1091,14 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
 		return -ENODEV;
 	}
 
+	/* init swap_buf function according to word width configuration */
+	if (spi->bits_per_word == 32)
+		ifx_dev->swap_buf = swap_buf_32;
+	else if (spi->bits_per_word == 16)
+		ifx_dev->swap_buf = swap_buf_16;
+	else
+		ifx_dev->swap_buf = swap_buf_8;
+
 	/* ensure SPI protocol flags are initialized to enable transfer */
 	ifx_dev->spi_more = 0;
 	ifx_dev->spi_slave_cts = 0;
@@ -1219,6 +1317,9 @@ static int ifx_spi_spi_remove(struct spi_device *spi)
 
 static void ifx_spi_spi_shutdown(struct spi_device *spi)
 {
+	struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi);
+
+	ifx_modem_power_off(ifx_dev);
 }
 
 /*
@@ -1338,7 +1439,7 @@ static struct spi_driver ifx_spi_driver = {
 		.owner = THIS_MODULE},
 	.probe = ifx_spi_spi_probe,
 	.shutdown = ifx_spi_spi_shutdown,
-	.remove = __devexit_p(ifx_spi_spi_remove),
+	.remove = ifx_spi_spi_remove,
 	.suspend = ifx_spi_spi_suspend,
 	.resume = ifx_spi_spi_resume,
 	.id_table = ifx_id_table
@@ -1354,7 +1455,9 @@ static void __exit ifx_spi_exit(void)
 {
 	/* unregister */
 	tty_unregister_driver(tty_drv);
+	put_tty_driver(tty_drv);
 	spi_unregister_driver((void *)&ifx_spi_driver);
+	unregister_reboot_notifier(&ifx_modem_reboot_notifier_block);
 }
 
 /**
@@ -1389,16 +1492,31 @@ static int __init ifx_spi_init(void)
 	if (result) {
 		pr_err("%s: tty_register_driver failed(%d)",
 			DRVNAME, result);
-		put_tty_driver(tty_drv);
-		return result;
+		goto err_free_tty;
 	}
 
 	result = spi_register_driver((void *)&ifx_spi_driver);
 	if (result) {
 		pr_err("%s: spi_register_driver failed(%d)",
 			DRVNAME, result);
-		tty_unregister_driver(tty_drv);
+		goto err_unreg_tty;
 	}
+
+	result = register_reboot_notifier(&ifx_modem_reboot_notifier_block);
+	if (result) {
+		pr_err("%s: register ifx modem reboot notifier failed(%d)",
+			DRVNAME, result);
+		goto err_unreg_spi;
+	}
+
+	return 0;
+err_unreg_spi:
+	spi_unregister_driver((void *)&ifx_spi_driver);
+err_unreg_tty:
+	tty_unregister_driver(tty_drv);
+err_free_tty:
+	put_tty_driver(tty_drv);
+
 	return result;
 }
 
diff --git a/drivers/tty/serial/ifx6x60.h b/drivers/tty/serial/ifx6x60.h
index e8464baf9e7..4fbddc29783 100644
--- a/drivers/tty/serial/ifx6x60.h
+++ b/drivers/tty/serial/ifx6x60.h
@@ -41,6 +41,7 @@
 #define IFX_SPI_STATE_IO_IN_PROGRESS	1
 #define IFX_SPI_STATE_IO_READY		2
 #define IFX_SPI_STATE_TIMER_PENDING	3
+#define IFX_SPI_STATE_IO_AVAILABLE	4
 
 /* flow control bitfields */
 #define IFX_SPI_DCD			0
@@ -124,6 +125,7 @@ struct ifx_spi_device {
 #define MR_INPROGRESS	1
 #define MR_COMPLETE	2
 	wait_queue_head_t mdm_reset_wait;
+	void (*swap_buf)(unsigned char *buf, int len, void *end);
 };
 
 #endif /* _IFX6X60_H */
diff --git a/drivers/tty/serial/ioc3_serial.c b/drivers/tty/serial/ioc3_serial.c
index 5ac52898a0b..d8f1d1d5447 100644
--- a/drivers/tty/serial/ioc3_serial.c
+++ b/drivers/tty/serial/ioc3_serial.c
@@ -2010,7 +2010,7 @@ static int ioc3uart_remove(struct ioc3_submodule *is,
  * @idd: ioc3 driver data for this card
  */
 
-static int __devinit
+static int
 ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
 {
 	struct pci_dev *pdev = idd->pdev;
diff --git a/drivers/tty/serial/jsm/jsm.h b/drivers/tty/serial/jsm/jsm.h
index 529bec6edaf..844d5e4eb1a 100644
--- a/drivers/tty/serial/jsm/jsm.h
+++ b/drivers/tty/serial/jsm/jsm.h
@@ -57,9 +57,11 @@ enum {
 	DBG_CARR	= 0x10000,
 };
 
-#define jsm_printk(nlevel, klevel, pdev, fmt, args...)	\
-	if ((DBG_##nlevel & jsm_debug))			\
-	dev_printk(KERN_##klevel, pdev->dev, fmt, ## args)
+#define jsm_dbg(nlevel, pdev, fmt, ...)				\
+do {								\
+	if (DBG_##nlevel & jsm_debug)				\
+		dev_dbg(pdev->dev, fmt, ##__VA_ARGS__);		\
+} while (0)
 
 #define	MAXLINES	256
 #define MAXPORTS	8
diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c
index 5ab3c3b595e..a47d882d674 100644
--- a/drivers/tty/serial/jsm/jsm_driver.c
+++ b/drivers/tty/serial/jsm/jsm_driver.c
@@ -64,7 +64,7 @@ int jsm_debug;
 module_param(jsm_debug, int, 0);
 MODULE_PARM_DESC(jsm_debug, "Driver debugging level");
 
-static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	int rc = 0;
 	struct jsm_board *brd;
@@ -107,8 +107,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device
 
 	brd->irq = pdev->irq;
 
-	jsm_printk(INIT, INFO, &brd->pci_dev,
-		"jsm_found_board - NEO adapter\n");
+	jsm_dbg(INIT, &brd->pci_dev, "jsm_found_board - NEO adapter\n");
 
 	/* get the PCI Base Address Registers */
 	brd->membase	= pci_resource_start(pdev, 0);
@@ -179,7 +178,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device
 	return rc;
 }
 
-static void __devexit jsm_remove_one(struct pci_dev *pdev)
+static void jsm_remove_one(struct pci_dev *pdev)
 {
 	struct jsm_board *brd = pci_get_drvdata(pdev);
 	int i = 0;
@@ -218,7 +217,7 @@ static struct pci_driver jsm_driver = {
 	.name		= "jsm",
 	.id_table	= jsm_pci_tbl,
 	.probe		= jsm_probe_one,
-	.remove		= __devexit_p(jsm_remove_one),
+	.remove		= jsm_remove_one,
 	.err_handler    = &jsm_err_handler,
 };
 
diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c
index 81dfafa11b0..dfaf4882641 100644
--- a/drivers/tty/serial/jsm/jsm_neo.c
+++ b/drivers/tty/serial/jsm/jsm_neo.c
@@ -52,7 +52,7 @@ static void neo_set_cts_flow_control(struct jsm_channel *ch)
 	ier = readb(&ch->ch_neo_uart->ier);
 	efr = readb(&ch->ch_neo_uart->efr);
 
-	jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting CTSFLOW\n");
+	jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Setting CTSFLOW\n");
 
 	/* Turn on auto CTS flow control */
 	ier |= (UART_17158_IER_CTSDSR);
@@ -83,7 +83,7 @@ static void neo_set_rts_flow_control(struct jsm_channel *ch)
 	ier = readb(&ch->ch_neo_uart->ier);
 	efr = readb(&ch->ch_neo_uart->efr);
 
-	jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting RTSFLOW\n");
+	jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Setting RTSFLOW\n");
 
 	/* Turn on auto RTS flow control */
 	ier |= (UART_17158_IER_RTSDTR);
@@ -123,7 +123,7 @@ static void neo_set_ixon_flow_control(struct jsm_channel *ch)
 	ier = readb(&ch->ch_neo_uart->ier);
 	efr = readb(&ch->ch_neo_uart->efr);
 
-	jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXON FLOW\n");
+	jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Setting IXON FLOW\n");
 
 	/* Turn off auto CTS flow control */
 	ier &= ~(UART_17158_IER_CTSDSR);
@@ -160,7 +160,7 @@ static void neo_set_ixoff_flow_control(struct jsm_channel *ch)
 	ier = readb(&ch->ch_neo_uart->ier);
 	efr = readb(&ch->ch_neo_uart->efr);
 
-	jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXOFF FLOW\n");
+	jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Setting IXOFF FLOW\n");
 
 	/* Turn off auto RTS flow control */
 	ier &= ~(UART_17158_IER_RTSDTR);
@@ -198,7 +198,7 @@ static void neo_set_no_input_flow_control(struct jsm_channel *ch)
 	ier = readb(&ch->ch_neo_uart->ier);
 	efr = readb(&ch->ch_neo_uart->efr);
 
-	jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Input FLOW\n");
+	jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Unsetting Input FLOW\n");
 
 	/* Turn off auto RTS flow control */
 	ier &= ~(UART_17158_IER_RTSDTR);
@@ -237,7 +237,7 @@ static void neo_set_no_output_flow_control(struct jsm_channel *ch)
 	ier = readb(&ch->ch_neo_uart->ier);
 	efr = readb(&ch->ch_neo_uart->efr);
 
-	jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Output FLOW\n");
+	jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "Unsetting Output FLOW\n");
 
 	/* Turn off auto CTS flow control */
 	ier &= ~(UART_17158_IER_CTSDSR);
@@ -276,7 +276,7 @@ static inline void neo_set_new_start_stop_chars(struct jsm_channel *ch)
 	if (ch->ch_c_cflag & CRTSCTS)
 		return;
 
-	jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "start\n");
+	jsm_dbg(PARAM, &ch->ch_bd->pci_dev, "start\n");
 
 	/* Tell UART what start/stop chars it should be looking for */
 	writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1);
@@ -455,7 +455,7 @@ static void neo_copy_data_from_uart_to_queue(struct jsm_channel *ch)
 		 * I hope thats okay with everyone? Yes? Good.
 		 */
 		while (qleft < 1) {
-			jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+			jsm_dbg(READ, &ch->ch_bd->pci_dev,
 				"Queue full, dropping DATA:%x LSR:%x\n",
 				ch->ch_rqueue[tail], ch->ch_equeue[tail]);
 
@@ -467,8 +467,8 @@ static void neo_copy_data_from_uart_to_queue(struct jsm_channel *ch)
 		memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, 1);
 		ch->ch_equeue[head] = (u8) linestatus;
 
-		jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
-				"DATA/LSR pair: %x %x\n", ch->ch_rqueue[head], ch->ch_equeue[head]);
+		jsm_dbg(READ, &ch->ch_bd->pci_dev, "DATA/LSR pair: %x %x\n",
+			ch->ch_rqueue[head], ch->ch_equeue[head]);
 
 		/* Ditch any remaining linestatus value. */
 		linestatus = 0;
@@ -521,8 +521,8 @@ static void neo_copy_data_from_queue_to_uart(struct jsm_channel *ch)
 			ch->ch_cached_lsr &= ~(UART_LSR_THRE);
 
 			writeb(circ->buf[circ->tail], &ch->ch_neo_uart->txrx);
-			jsm_printk(WRITE, INFO, &ch->ch_bd->pci_dev,
-					"Tx data: %x\n", circ->buf[circ->tail]);
+			jsm_dbg(WRITE, &ch->ch_bd->pci_dev,
+				"Tx data: %x\n", circ->buf[circ->tail]);
 			circ->tail = (circ->tail + 1) & (UART_XMIT_SIZE - 1);
 			ch->ch_txcount++;
 		}
@@ -575,8 +575,9 @@ static void neo_parse_modem(struct jsm_channel *ch, u8 signals)
 {
 	u8 msignals = signals;
 
-	jsm_printk(MSIGS, INFO, &ch->ch_bd->pci_dev,
-			"neo_parse_modem: port: %d msignals: %x\n", ch->ch_portnum, msignals);
+	jsm_dbg(MSIGS, &ch->ch_bd->pci_dev,
+		"neo_parse_modem: port: %d msignals: %x\n",
+		ch->ch_portnum, msignals);
 
 	/* Scrub off lower bits. They signify delta's, which I don't care about */
 	/* Keep DDCD and DDSR though */
@@ -606,8 +607,8 @@ static void neo_parse_modem(struct jsm_channel *ch, u8 signals)
 	else
 		ch->ch_mistat &= ~UART_MSR_CTS;
 
-	jsm_printk(MSIGS, INFO, &ch->ch_bd->pci_dev,
-			"Port: %d DTR: %d RTS: %d CTS: %d DSR: %d " "RI: %d CD: %d\n",
+	jsm_dbg(MSIGS, &ch->ch_bd->pci_dev,
+		"Port: %d DTR: %d RTS: %d CTS: %d DSR: %d " "RI: %d CD: %d\n",
 		ch->ch_portnum,
 		!!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_DTR),
 		!!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_RTS),
@@ -649,8 +650,8 @@ static void neo_flush_uart_write(struct jsm_channel *ch)
 		/* Check to see if the UART feels it completely flushed the FIFO. */
 		tmp = readb(&ch->ch_neo_uart->isr_fcr);
 		if (tmp & 4) {
-			jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev,
-					"Still flushing TX UART... i: %d\n", i);
+			jsm_dbg(IOCTL, &ch->ch_bd->pci_dev,
+				"Still flushing TX UART... i: %d\n", i);
 			udelay(10);
 		}
 		else
@@ -681,8 +682,8 @@ static void neo_flush_uart_read(struct jsm_channel *ch)
 		/* Check to see if the UART feels it completely flushed the FIFO. */
 		tmp = readb(&ch->ch_neo_uart->isr_fcr);
 		if (tmp & 2) {
-			jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev,
-					"Still flushing RX UART... i: %d\n", i);
+			jsm_dbg(IOCTL, &ch->ch_bd->pci_dev,
+				"Still flushing RX UART... i: %d\n", i);
 			udelay(10);
 		}
 		else
@@ -705,8 +706,9 @@ static void neo_clear_break(struct jsm_channel *ch, int force)
 		writeb((temp & ~UART_LCR_SBC), &ch->ch_neo_uart->lcr);
 
 		ch->ch_flags &= ~(CH_BREAK_SENDING);
-		jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev,
-				"clear break Finishing UART_LCR_SBC! finished: %lx\n", jiffies);
+		jsm_dbg(IOCTL, &ch->ch_bd->pci_dev,
+			"clear break Finishing UART_LCR_SBC! finished: %lx\n",
+			jiffies);
 
 		/* flush write operation */
 		neo_pci_posting_flush(ch->ch_bd);
@@ -748,8 +750,8 @@ static inline void neo_parse_isr(struct jsm_board *brd, u32 port)
 		 */
 		isr &= ~(UART_17158_IIR_FIFO_ENABLED);
 
-		jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
-				"%s:%d isr: %x\n", __FILE__, __LINE__, isr);
+		jsm_dbg(INTR, &ch->ch_bd->pci_dev, "%s:%d isr: %x\n",
+			__FILE__, __LINE__, isr);
 
 		if (isr & (UART_17158_IIR_RDI_TIMEOUT | UART_IIR_RDI)) {
 			/* Read data from uart -> queue */
@@ -772,8 +774,9 @@ static inline void neo_parse_isr(struct jsm_board *brd, u32 port)
 		if (isr & UART_17158_IIR_XONXOFF) {
 			cause = readb(&ch->ch_neo_uart->xoffchar1);
 
-			jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
-					"Port %d. Got ISR_XONXOFF: cause:%x\n", port, cause);
+			jsm_dbg(INTR, &ch->ch_bd->pci_dev,
+				"Port %d. Got ISR_XONXOFF: cause:%x\n",
+				port, cause);
 
 			/*
 			 * Since the UART detected either an XON or
@@ -786,17 +789,19 @@ static inline void neo_parse_isr(struct jsm_board *brd, u32 port)
 				if (brd->channels[port]->ch_flags & CH_STOP) {
 					ch->ch_flags &= ~(CH_STOP);
 				}
-				jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
-						"Port %d. XON detected in incoming data\n", port);
+				jsm_dbg(INTR, &ch->ch_bd->pci_dev,
+					"Port %d. XON detected in incoming data\n",
+					port);
 			}
 			else if (cause == UART_17158_XOFF_DETECT) {
 				if (!(brd->channels[port]->ch_flags & CH_STOP)) {
 					ch->ch_flags |= CH_STOP;
-					jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
-							"Setting CH_STOP\n");
+					jsm_dbg(INTR, &ch->ch_bd->pci_dev,
+						"Setting CH_STOP\n");
 				}
-				jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
-						"Port: %d. XOFF detected in incoming data\n", port);
+				jsm_dbg(INTR, &ch->ch_bd->pci_dev,
+					"Port: %d. XOFF detected in incoming data\n",
+					port);
 			}
 			spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
 		}
@@ -825,8 +830,8 @@ static inline void neo_parse_isr(struct jsm_board *brd, u32 port)
 		}
 
 		/* Parse any modem signal changes */
-		jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
-				"MOD_STAT: sending to parse_modem_sigs\n");
+		jsm_dbg(INTR, &ch->ch_bd->pci_dev,
+			"MOD_STAT: sending to parse_modem_sigs\n");
 		neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr));
 	}
 }
@@ -849,8 +854,8 @@ static inline void neo_parse_lsr(struct jsm_board *brd, u32 port)
 
 	linestatus = readb(&ch->ch_neo_uart->lsr);
 
-	jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
-			"%s:%d port: %d linestatus: %x\n", __FILE__, __LINE__, port, linestatus);
+	jsm_dbg(INTR, &ch->ch_bd->pci_dev, "%s:%d port: %d linestatus: %x\n",
+		__FILE__, __LINE__, port, linestatus);
 
 	ch->ch_cached_lsr |= linestatus;
 
@@ -869,7 +874,7 @@ static inline void neo_parse_lsr(struct jsm_board *brd, u32 port)
 	 *to do the special RX+LSR read for this FIFO load.
 	 */
 	if (linestatus & UART_17158_RX_FIFO_DATA_ERROR)
-		jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev,
+		jsm_dbg(INTR, &ch->ch_bd->pci_dev,
 			"%s:%d Port: %d Got an RX error, need to parse LSR\n",
 			__FILE__, __LINE__, port);
 
@@ -880,20 +885,21 @@ static inline void neo_parse_lsr(struct jsm_board *brd, u32 port)
 
 	if (linestatus & UART_LSR_PE) {
 		ch->ch_err_parity++;
-		jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev,
-			"%s:%d Port: %d. PAR ERR!\n", __FILE__, __LINE__, port);
+		jsm_dbg(INTR, &ch->ch_bd->pci_dev, "%s:%d Port: %d. PAR ERR!\n",
+			__FILE__, __LINE__, port);
 	}
 
 	if (linestatus & UART_LSR_FE) {
 		ch->ch_err_frame++;
-		jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev,
-			"%s:%d Port: %d. FRM ERR!\n", __FILE__, __LINE__, port);
+		jsm_dbg(INTR, &ch->ch_bd->pci_dev, "%s:%d Port: %d. FRM ERR!\n",
+			__FILE__, __LINE__, port);
 	}
 
 	if (linestatus & UART_LSR_BI) {
 		ch->ch_err_break++;
-		jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev,
-			"%s:%d Port: %d. BRK INTR!\n", __FILE__, __LINE__, port);
+		jsm_dbg(INTR, &ch->ch_bd->pci_dev,
+			"%s:%d Port: %d. BRK INTR!\n",
+			__FILE__, __LINE__, port);
 	}
 
 	if (linestatus & UART_LSR_OE) {
@@ -904,8 +910,9 @@ static inline void neo_parse_lsr(struct jsm_board *brd, u32 port)
 		 * Probably we should eventually have an orun stat in our driver...
 		 */
 		ch->ch_err_overrun++;
-		jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev,
-			"%s:%d Port: %d. Rx Overrun!\n", __FILE__, __LINE__, port);
+		jsm_dbg(INTR, &ch->ch_bd->pci_dev,
+			"%s:%d Port: %d. Rx Overrun!\n",
+			__FILE__, __LINE__, port);
 	}
 
 	if (linestatus & UART_LSR_THRE) {
@@ -1128,11 +1135,11 @@ static irqreturn_t neo_intr(int irq, void *voidbrd)
 	 */
 	uart_poll = readl(brd->re_map_membase + UART_17158_POLL_ADDR_OFFSET);
 
-	jsm_printk(INTR, INFO, &brd->pci_dev,
-		"%s:%d uart_poll: %x\n", __FILE__, __LINE__, uart_poll);
+	jsm_dbg(INTR, &brd->pci_dev, "%s:%d uart_poll: %x\n",
+		__FILE__, __LINE__, uart_poll);
 
 	if (!uart_poll) {
-		jsm_printk(INTR, INFO, &brd->pci_dev,
+		jsm_dbg(INTR, &brd->pci_dev,
 			"Kernel interrupted to me, but no pending interrupts...\n");
 		spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags);
 		return IRQ_NONE;
@@ -1158,15 +1165,15 @@ static irqreturn_t neo_intr(int irq, void *voidbrd)
 			continue;
 		}
 
-		jsm_printk(INTR, INFO, &brd->pci_dev,
-		"%s:%d port: %x type: %x\n", __FILE__, __LINE__, port, type);
+		jsm_dbg(INTR, &brd->pci_dev, "%s:%d port: %x type: %x\n",
+			__FILE__, __LINE__, port, type);
 
 		/* Remove this port + type from uart_poll */
 		uart_poll &= ~(jsm_offset_table[port]);
 
 		if (!type) {
 			/* If no type, just ignore it, and move onto next port */
-			jsm_printk(INTR, ERR, &brd->pci_dev,
+			jsm_dbg(INTR, &brd->pci_dev,
 				"Interrupt with no type! port: %d\n", port);
 			continue;
 		}
@@ -1231,15 +1238,16 @@ static irqreturn_t neo_intr(int irq, void *voidbrd)
 			 * these once and awhile.
 			 * Its harmless, just ignore it and move on.
 			 */
-			jsm_printk(INTR, ERR, &brd->pci_dev,
-				"%s:%d Unknown Interrupt type: %x\n", __FILE__, __LINE__, type);
+			jsm_dbg(INTR, &brd->pci_dev,
+				"%s:%d Unknown Interrupt type: %x\n",
+				__FILE__, __LINE__, type);
 			continue;
 		}
 	}
 
 	spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags);
 
-	jsm_printk(INTR, INFO, &brd->pci_dev, "finish.\n");
+	jsm_dbg(INTR, &brd->pci_dev, "finish\n");
 	return IRQ_HANDLED;
 }
 
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index 71397961773..4c00c5550b1 100644
--- a/drivers/tty/serial/jsm/jsm_tty.c
+++ b/drivers/tty/serial/jsm/jsm_tty.c
@@ -43,7 +43,7 @@ static inline int jsm_get_mstat(struct jsm_channel *ch)
 	unsigned char mstat;
 	unsigned result;
 
-	jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "start\n");
+	jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, "start\n");
 
 	mstat = (ch->ch_mostat | ch->ch_mistat);
 
@@ -62,7 +62,7 @@ static inline int jsm_get_mstat(struct jsm_channel *ch)
 	if (mstat & UART_MSR_DCD)
 		result |= TIOCM_CD;
 
-	jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n");
+	jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, "finish\n");
 	return result;
 }
 
@@ -79,14 +79,14 @@ static unsigned int jsm_tty_get_mctrl(struct uart_port *port)
 	int result;
 	struct jsm_channel *channel = (struct jsm_channel *)port;
 
-	jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n");
+	jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "start\n");
 
 	result = jsm_get_mstat(channel);
 
 	if (result < 0)
 		return -ENXIO;
 
-	jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n");
+	jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "finish\n");
 
 	return result;
 }
@@ -100,7 +100,7 @@ static void jsm_tty_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
 	struct jsm_channel *channel = (struct jsm_channel *)port;
 
-	jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n");
+	jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "start\n");
 
 	if (mctrl & TIOCM_RTS)
 		channel->ch_mostat |= UART_MCR_RTS;
@@ -114,7 +114,7 @@ static void jsm_tty_set_mctrl(struct uart_port *port, unsigned int mctrl)
 
 	channel->ch_bd->bd_ops->assert_modem_signals(channel);
 
-	jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n");
+	jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "finish\n");
 	udelay(10);
 }
 
@@ -135,23 +135,23 @@ static void jsm_tty_start_tx(struct uart_port *port)
 {
 	struct jsm_channel *channel = (struct jsm_channel *)port;
 
-	jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n");
+	jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "start\n");
 
 	channel->ch_flags &= ~(CH_STOP);
 	jsm_tty_write(port);
 
-	jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n");
+	jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "finish\n");
 }
 
 static void jsm_tty_stop_tx(struct uart_port *port)
 {
 	struct jsm_channel *channel = (struct jsm_channel *)port;
 
-	jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n");
+	jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "start\n");
 
 	channel->ch_flags |= (CH_STOP);
 
-	jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n");
+	jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "finish\n");
 }
 
 static void jsm_tty_send_xchar(struct uart_port *port, char ch)
@@ -216,16 +216,16 @@ static int jsm_tty_open(struct uart_port *port)
 	if (!channel->ch_rqueue) {
 		channel->ch_rqueue = kzalloc(RQUEUESIZE, GFP_KERNEL);
 		if (!channel->ch_rqueue) {
-			jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev,
-				"unable to allocate read queue buf");
+			jsm_dbg(INIT, &channel->ch_bd->pci_dev,
+				"unable to allocate read queue buf\n");
 			return -ENOMEM;
 		}
 	}
 	if (!channel->ch_equeue) {
 		channel->ch_equeue = kzalloc(EQUEUESIZE, GFP_KERNEL);
 		if (!channel->ch_equeue) {
-			jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev,
-				"unable to allocate error queue buf");
+			jsm_dbg(INIT, &channel->ch_bd->pci_dev,
+				"unable to allocate error queue buf\n");
 			return -ENOMEM;
 		}
 	}
@@ -234,7 +234,7 @@ static int jsm_tty_open(struct uart_port *port)
 	/*
 	 * Initialize if neither terminal is open.
 	 */
-	jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev,
+	jsm_dbg(OPEN, &channel->ch_bd->pci_dev,
 		"jsm_open: initializing channel in open...\n");
 
 	/*
@@ -270,7 +270,7 @@ static int jsm_tty_open(struct uart_port *port)
 
 	channel->ch_open_count++;
 
-	jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev, "finish\n");
+	jsm_dbg(OPEN, &channel->ch_bd->pci_dev, "finish\n");
 	return 0;
 }
 
@@ -280,7 +280,7 @@ static void jsm_tty_close(struct uart_port *port)
 	struct ktermios *ts;
 	struct jsm_channel *channel = (struct jsm_channel *)port;
 
-	jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n");
+	jsm_dbg(CLOSE, &channel->ch_bd->pci_dev, "start\n");
 
 	bd = channel->ch_bd;
 	ts = &port->state->port.tty->termios;
@@ -293,7 +293,7 @@ static void jsm_tty_close(struct uart_port *port)
 	 * If we have HUPCL set, lower DTR and RTS
 	 */
 	if (channel->ch_c_cflag & HUPCL) {
-		jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev,
+		jsm_dbg(CLOSE, &channel->ch_bd->pci_dev,
 			"Close. HUPCL set, dropping DTR/RTS\n");
 
 		/* Drop RTS/DTR */
@@ -304,7 +304,7 @@ static void jsm_tty_close(struct uart_port *port)
 	/* Turn off UART interrupts for this port */
 	channel->ch_bd->bd_ops->uart_off(channel);
 
-	jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "finish\n");
+	jsm_dbg(CLOSE, &channel->ch_bd->pci_dev, "finish\n");
 }
 
 static void jsm_tty_set_termios(struct uart_port *port,
@@ -371,7 +371,7 @@ static struct uart_ops jsm_ops = {
  * Init the tty subsystem.  Called once per board after board has been
  * downloaded and init'ed.
  */
-int __devinit jsm_tty_init(struct jsm_board *brd)
+int jsm_tty_init(struct jsm_board *brd)
 {
 	int i;
 	void __iomem *vaddr;
@@ -380,7 +380,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd)
 	if (!brd)
 		return -ENXIO;
 
-	jsm_printk(INIT, INFO, &brd->pci_dev, "start\n");
+	jsm_dbg(INIT, &brd->pci_dev, "start\n");
 
 	/*
 	 * Initialize board structure elements.
@@ -401,9 +401,9 @@ int __devinit jsm_tty_init(struct jsm_board *brd)
 			 */
 			brd->channels[i] = kzalloc(sizeof(struct jsm_channel), GFP_KERNEL);
 			if (!brd->channels[i]) {
-				jsm_printk(CORE, ERR, &brd->pci_dev,
+				jsm_dbg(CORE, &brd->pci_dev,
 					"%s:%d Unable to allocate memory for channel struct\n",
-							 __FILE__, __LINE__);
+					__FILE__, __LINE__);
 			}
 		}
 	}
@@ -431,7 +431,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd)
 		init_waitqueue_head(&ch->ch_flags_wait);
 	}
 
-	jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n");
+	jsm_dbg(INIT, &brd->pci_dev, "finish\n");
 	return 0;
 }
 
@@ -444,7 +444,7 @@ int jsm_uart_port_init(struct jsm_board *brd)
 	if (!brd)
 		return -ENXIO;
 
-	jsm_printk(INIT, INFO, &brd->pci_dev, "start\n");
+	jsm_dbg(INIT, &brd->pci_dev, "start\n");
 
 	/*
 	 * Initialize board structure elements.
@@ -481,7 +481,7 @@ int jsm_uart_port_init(struct jsm_board *brd)
 			printk(KERN_INFO "jsm: Port %d added\n", i);
 	}
 
-	jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n");
+	jsm_dbg(INIT, &brd->pci_dev, "finish\n");
 	return 0;
 }
 
@@ -493,7 +493,7 @@ int jsm_remove_uart_port(struct jsm_board *brd)
 	if (!brd)
 		return -ENXIO;
 
-	jsm_printk(INIT, INFO, &brd->pci_dev, "start\n");
+	jsm_dbg(INIT, &brd->pci_dev, "start\n");
 
 	/*
 	 * Initialize board structure elements.
@@ -513,7 +513,7 @@ int jsm_remove_uart_port(struct jsm_board *brd)
 		uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port);
 	}
 
-	jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n");
+	jsm_dbg(INIT, &brd->pci_dev, "finish\n");
 	return 0;
 }
 
@@ -531,7 +531,7 @@ void jsm_input(struct jsm_channel *ch)
 	int s = 0;
 	int i = 0;
 
-	jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start\n");
+	jsm_dbg(READ, &ch->ch_bd->pci_dev, "start\n");
 
 	if (!ch)
 		return;
@@ -560,7 +560,7 @@ void jsm_input(struct jsm_channel *ch)
 		return;
 	}
 
-	jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start\n");
+	jsm_dbg(READ, &ch->ch_bd->pci_dev, "start\n");
 
 	/*
 	 *If the device is not open, or CREAD is off, flush
@@ -569,8 +569,9 @@ void jsm_input(struct jsm_channel *ch)
 	if (!tp ||
 		!(tp->termios.c_cflag & CREAD) ) {
 
-		jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
-			"input. dropping %d bytes on port %d...\n", data_len, ch->ch_portnum);
+		jsm_dbg(READ, &ch->ch_bd->pci_dev,
+			"input. dropping %d bytes on port %d...\n",
+			data_len, ch->ch_portnum);
 		ch->ch_r_head = tail;
 
 		/* Force queue flow control to be released, if needed */
@@ -585,17 +586,17 @@ void jsm_input(struct jsm_channel *ch)
 	 */
 	if (ch->ch_flags & CH_STOPI) {
 		spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
-		jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+		jsm_dbg(READ, &ch->ch_bd->pci_dev,
 			"Port %d throttled, not reading any data. head: %x tail: %x\n",
 			ch->ch_portnum, head, tail);
 		return;
 	}
 
-	jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start 2\n");
+	jsm_dbg(READ, &ch->ch_bd->pci_dev, "start 2\n");
 
 	if (data_len <= 0) {
 		spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
-		jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "jsm_input 1\n");
+		jsm_dbg(READ, &ch->ch_bd->pci_dev, "jsm_input 1\n");
 		return;
 	}
 
@@ -653,7 +654,7 @@ void jsm_input(struct jsm_channel *ch)
 	/* Tell the tty layer its okay to "eat" the data now */
 	tty_flip_buffer_push(tp);
 
-	jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n");
+	jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, "finish\n");
 }
 
 static void jsm_carrier(struct jsm_channel *ch)
@@ -663,7 +664,7 @@ static void jsm_carrier(struct jsm_channel *ch)
 	int virt_carrier = 0;
 	int phys_carrier = 0;
 
-	jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, "start\n");
+	jsm_dbg(CARR, &ch->ch_bd->pci_dev, "start\n");
 	if (!ch)
 		return;
 
@@ -673,16 +674,16 @@ static void jsm_carrier(struct jsm_channel *ch)
 		return;
 
 	if (ch->ch_mistat & UART_MSR_DCD) {
-		jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev,
-			"mistat: %x D_CD: %x\n", ch->ch_mistat, ch->ch_mistat & UART_MSR_DCD);
+		jsm_dbg(CARR, &ch->ch_bd->pci_dev, "mistat: %x D_CD: %x\n",
+			ch->ch_mistat, ch->ch_mistat & UART_MSR_DCD);
 		phys_carrier = 1;
 	}
 
 	if (ch->ch_c_cflag & CLOCAL)
 		virt_carrier = 1;
 
-	jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev,
-		"DCD: physical: %d virt: %d\n", phys_carrier, virt_carrier);
+	jsm_dbg(CARR, &ch->ch_bd->pci_dev, "DCD: physical: %d virt: %d\n",
+		phys_carrier, virt_carrier);
 
 	/*
 	 * Test for a VIRTUAL carrier transition to HIGH.
@@ -694,8 +695,7 @@ static void jsm_carrier(struct jsm_channel *ch)
 		 * for carrier in the open routine.
 		 */
 
-		jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev,
-			"carrier: virt DCD rose\n");
+		jsm_dbg(CARR, &ch->ch_bd->pci_dev, "carrier: virt DCD rose\n");
 
 		if (waitqueue_active(&(ch->ch_flags_wait)))
 			wake_up_interruptible(&ch->ch_flags_wait);
@@ -711,7 +711,7 @@ static void jsm_carrier(struct jsm_channel *ch)
 		 * for carrier in the open routine.
 		 */
 
-		jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev,
+		jsm_dbg(CARR, &ch->ch_bd->pci_dev,
 			"carrier: physical DCD rose\n");
 
 		if (waitqueue_active(&(ch->ch_flags_wait)))
@@ -790,8 +790,8 @@ void jsm_check_queue_flow_control(struct jsm_channel *ch)
 			if(!(ch->ch_flags & CH_RECEIVER_OFF)) {
 				bd_ops->disable_receiver(ch);
 				ch->ch_flags |= (CH_RECEIVER_OFF);
-				jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
-					"Internal queue hit hilevel mark (%d)! Turning off interrupts.\n",
+				jsm_dbg(READ, &ch->ch_bd->pci_dev,
+					"Internal queue hit hilevel mark (%d)! Turning off interrupts\n",
 					qleft);
 			}
 		}
@@ -800,8 +800,9 @@ void jsm_check_queue_flow_control(struct jsm_channel *ch)
 			if (ch->ch_stops_sent <= MAX_STOPS_SENT) {
 				bd_ops->send_stop_character(ch);
 				ch->ch_stops_sent++;
-				jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
-					"Sending stop char! Times sent: %x\n", ch->ch_stops_sent);
+				jsm_dbg(READ, &ch->ch_bd->pci_dev,
+					"Sending stop char! Times sent: %x\n",
+					ch->ch_stops_sent);
 			}
 		}
 	}
@@ -827,8 +828,8 @@ void jsm_check_queue_flow_control(struct jsm_channel *ch)
 			if (ch->ch_flags & CH_RECEIVER_OFF) {
 				bd_ops->enable_receiver(ch);
 				ch->ch_flags &= ~(CH_RECEIVER_OFF);
-				jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
-					"Internal queue hit lowlevel mark (%d)! Turning on interrupts.\n",
+				jsm_dbg(READ, &ch->ch_bd->pci_dev,
+					"Internal queue hit lowlevel mark (%d)! Turning on interrupts\n",
 					qleft);
 			}
 		}
@@ -836,7 +837,8 @@ void jsm_check_queue_flow_control(struct jsm_channel *ch)
 		else if (ch->ch_c_iflag & IXOFF && ch->ch_stops_sent) {
 			ch->ch_stops_sent = 0;
 			bd_ops->send_start_character(ch);
-			jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "Sending start char!\n");
+			jsm_dbg(READ, &ch->ch_bd->pci_dev,
+				"Sending start char!\n");
 		}
 	}
 }
diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c
index d185247ba1a..6ac2b797a76 100644
--- a/drivers/tty/serial/kgdb_nmi.c
+++ b/drivers/tty/serial/kgdb_nmi.c
@@ -266,6 +266,7 @@ static int kgdb_nmi_tty_install(struct tty_driver *drv, struct tty_struct *tty)
 	}
 	return 0;
 err:
+	tty_port_destroy(&priv->port);
 	kfree(priv);
 	return ret;
 }
@@ -275,6 +276,7 @@ static void kgdb_nmi_tty_cleanup(struct tty_struct *tty)
 	struct kgdb_nmi_tty_priv *priv = tty->driver_data;
 
 	tty->driver_data = NULL;
+	tty_port_destroy(&priv->port);
 	kfree(priv);
 }
 
diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c
index ba3af3bf6d4..0e86bff3fe2 100644
--- a/drivers/tty/serial/lpc32xx_hs.c
+++ b/drivers/tty/serial/lpc32xx_hs.c
@@ -686,7 +686,7 @@ static struct uart_ops serial_lpc32xx_pops = {
 /*
  * Register a set of serial devices attached to a platform device
  */
-static int __devinit serial_hs_lpc32xx_probe(struct platform_device *pdev)
+static int serial_hs_lpc32xx_probe(struct platform_device *pdev)
 {
 	struct lpc32xx_hsuart_port *p = &lpc32xx_hs_ports[uarts_registered];
 	int ret = 0;
@@ -740,7 +740,7 @@ static int __devinit serial_hs_lpc32xx_probe(struct platform_device *pdev)
 /*
  * Remove serial ports registered against a platform device.
  */
-static int __devexit serial_hs_lpc32xx_remove(struct platform_device *pdev)
+static int serial_hs_lpc32xx_remove(struct platform_device *pdev)
 {
 	struct lpc32xx_hsuart_port *p = platform_get_drvdata(pdev);
 
@@ -783,7 +783,7 @@ MODULE_DEVICE_TABLE(of, serial_hs_lpc32xx_dt_ids);
 
 static struct platform_driver serial_hs_lpc32xx_driver = {
 	.probe		= serial_hs_lpc32xx_probe,
-	.remove		= __devexit_p(serial_hs_lpc32xx_remove),
+	.remove		= serial_hs_lpc32xx_remove,
 	.suspend	= serial_hs_lpc32xx_suspend,
 	.resume		= serial_hs_lpc32xx_resume,
 	.driver		= {
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index 0f24486be53..7ce3197087b 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -742,7 +742,7 @@ static struct uart_driver max3100_uart_driver = {
 };
 static int uart_driver_registered;
 
-static int __devinit max3100_probe(struct spi_device *spi)
+static int max3100_probe(struct spi_device *spi)
 {
 	int i, retval;
 	struct plat_max3100 *pdata;
@@ -818,7 +818,7 @@ static int __devinit max3100_probe(struct spi_device *spi)
 	return 0;
 }
 
-static int __devexit max3100_remove(struct spi_device *spi)
+static int max3100_remove(struct spi_device *spi)
 {
 	struct max3100_port *s = dev_get_drvdata(&spi->dev);
 	int i;
@@ -907,7 +907,7 @@ static struct spi_driver max3100_driver = {
 	},
 
 	.probe		= max3100_probe,
-	.remove		= __devexit_p(max3100_remove),
+	.remove		= max3100_remove,
 	.suspend	= max3100_suspend,
 	.resume		= max3100_resume,
 };
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 1ab1d2c66de..a801f6872ca 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -378,7 +378,7 @@ static void max310x_wait_pll(struct max310x_port *s)
 	}
 }
 
-static int __devinit max310x_update_best_err(unsigned long f, long *besterr)
+static int max310x_update_best_err(unsigned long f, long *besterr)
 {
 	/* Use baudrate 115200 for calculate error */
 	long err = f % (115200 * 16);
@@ -391,7 +391,7 @@ static int __devinit max310x_update_best_err(unsigned long f, long *besterr)
 	return 1;
 }
 
-static int __devinit max310x_set_ref_clk(struct max310x_port *s)
+static int max310x_set_ref_clk(struct max310x_port *s)
 {
 	unsigned int div, clksrc, pllcfg = 0;
 	long besterr = -1;
@@ -995,7 +995,7 @@ static struct max310x_pdata generic_plat_data = {
 	.frequency	= 26000000,
 };
 
-static int __devinit max310x_probe(struct spi_device *spi)
+static int max310x_probe(struct spi_device *spi)
 {
 	struct max310x_port *s;
 	struct device *dev = &spi->dev;
@@ -1178,6 +1178,7 @@ static int __devinit max310x_probe(struct spi_device *spi)
 		s->gpio.set		= max310x_gpio_set;
 		s->gpio.base		= pdata->gpio_base;
 		s->gpio.ngpio		= s->nr_gpio;
+		s->gpio.can_sleep	= 1;
 		if (gpiochip_add(&s->gpio)) {
 			/* Indicate that we should not call gpiochip_remove */
 			s->gpio.base = 0;
@@ -1202,7 +1203,7 @@ err_out:
 	return ret;
 }
 
-static int __devexit max310x_remove(struct spi_device *spi)
+static int max310x_remove(struct spi_device *spi)
 {
 	struct device *dev = &spi->dev;
 	struct max310x_port *s = dev_get_drvdata(dev);
@@ -1249,7 +1250,7 @@ static struct spi_driver max310x_driver = {
 		.owner	= THIS_MODULE,
 	},
 	.probe		= max310x_probe,
-	.remove		= __devexit_p(max310x_remove),
+	.remove		= max310x_remove,
 	.suspend	= max310x_suspend,
 	.resume		= max310x_resume,
 	.id_table	= max310x_id_table,
diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index 9afca093d6e..fcd56ab6053 100644
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -571,7 +571,7 @@ static struct uart_driver mcf_driver = {
 
 /****************************************************************************/
 
-static int __devinit mcf_probe(struct platform_device *pdev)
+static int mcf_probe(struct platform_device *pdev)
 {
 	struct mcf_platform_uart *platp = pdev->dev.platform_data;
 	struct uart_port *port;
@@ -599,7 +599,7 @@ static int __devinit mcf_probe(struct platform_device *pdev)
 
 /****************************************************************************/
 
-static int __devexit mcf_remove(struct platform_device *pdev)
+static int mcf_remove(struct platform_device *pdev)
 {
 	struct uart_port *port;
 	int i;
@@ -617,7 +617,7 @@ static int __devexit mcf_remove(struct platform_device *pdev)
 
 static struct platform_driver mcf_platform_driver = {
 	.probe		= mcf_probe,
-	.remove		= __devexit_p(mcf_remove),
+	.remove		= mcf_remove,
 	.driver		= {
 		.name	= "mcfuart",
 		.owner	= THIS_MODULE,
diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c
index c4b50af46c4..2c01344dc33 100644
--- a/drivers/tty/serial/mfd.c
+++ b/drivers/tty/serial/mfd.c
@@ -36,6 +36,7 @@
 #include <linux/serial_mfd.h>
 #include <linux/dma-mapping.h>
 #include <linux/pci.h>
+#include <linux/nmi.h>
 #include <linux/io.h>
 #include <linux/debugfs.h>
 #include <linux/pm_runtime.h>
@@ -1113,6 +1114,8 @@ serial_hsu_console_write(struct console *co, const char *s, unsigned int count)
 	unsigned int ier;
 	int locked = 1;
 
+	touch_nmi_watchdog();
+
 	local_irq_save(flags);
 	if (up->port.sysrq)
 		locked = 0;
@@ -1456,7 +1459,7 @@ static void serial_hsu_remove(struct pci_dev *pdev)
 }
 
 /* First 3 are UART ports, and the 4th is the DMA */
-static const struct pci_device_id pci_ids[] __devinitconst = {
+static const struct pci_device_id pci_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081B) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081C) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081D) },
@@ -1468,7 +1471,7 @@ static struct pci_driver hsu_pci_driver = {
 	.name =		"HSU serial",
 	.id_table =	pci_ids,
 	.probe =	serial_hsu_probe,
-	.remove =	__devexit_p(serial_hsu_remove),
+	.remove =	serial_hsu_remove,
 	.suspend =	serial_hsu_suspend,
 	.resume	=	serial_hsu_resume,
 	.driver = {
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index 8cf577008ad..7c23c4f4c58 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -1308,7 +1308,7 @@ static struct of_device_id mpc52xx_uart_of_match[] = {
 	{},
 };
 
-static int __devinit mpc52xx_uart_of_probe(struct platform_device *op)
+static int mpc52xx_uart_of_probe(struct platform_device *op)
 {
 	int idx = -1;
 	unsigned int uartclk;
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index df2a2240a3a..58734d7e746 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -773,7 +773,7 @@ static int serial_m3110_resume(struct spi_device *spi)
 #define serial_m3110_resume	NULL
 #endif
 
-static int __devinit serial_m3110_probe(struct spi_device *spi)
+static int serial_m3110_probe(struct spi_device *spi)
 {
 	struct uart_max3110 *max;
 	void *buffer;
@@ -855,7 +855,7 @@ err_get_page:
 	return ret;
 }
 
-static int __devexit serial_m3110_remove(struct spi_device *dev)
+static int serial_m3110_remove(struct spi_device *dev)
 {
 	struct uart_max3110 *max = spi_get_drvdata(dev);
 
@@ -879,7 +879,7 @@ static struct spi_driver uart_max3110_driver = {
 			.owner	= THIS_MODULE,
 	},
 	.probe		= serial_m3110_probe,
-	.remove		= __devexit_p(serial_m3110_remove),
+	.remove		= serial_m3110_remove,
 	.suspend	= serial_m3110_suspend,
 	.resume		= serial_m3110_resume,
 };
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 033e0bc9eba..95fd39be293 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -917,7 +917,7 @@ static int __init msm_serial_probe(struct platform_device *pdev)
 	return uart_add_one_port(&msm_uart_driver, port);
 }
 
-static int __devexit msm_serial_remove(struct platform_device *pdev)
+static int msm_serial_remove(struct platform_device *pdev)
 {
 	struct msm_port *msm_port = platform_get_drvdata(pdev);
 
diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c
index fca13dc73e2..1fa92284ade 100644
--- a/drivers/tty/serial/msm_serial_hs.c
+++ b/drivers/tty/serial/msm_serial_hs.c
@@ -401,7 +401,7 @@ static int msm_hs_request_port(struct uart_port *port)
 	return 0;
 }
 
-static int __devexit msm_hs_remove(struct platform_device *pdev)
+static int msm_hs_remove(struct platform_device *pdev)
 {
 
 	struct msm_hs_port *msm_uport;
@@ -1521,7 +1521,7 @@ err_msm_hs_init_clk:
 }
 
 /* Initialize tx and rx data structures */
-static int __devinit uartdm_init_port(struct uart_port *uport)
+static int uartdm_init_port(struct uart_port *uport)
 {
 	int ret = 0;
 	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
@@ -1614,7 +1614,7 @@ err_tx_command_ptr_ptr:
 	return ret;
 }
 
-static int __devinit msm_hs_probe(struct platform_device *pdev)
+static int msm_hs_probe(struct platform_device *pdev)
 {
 	int ret;
 	struct uart_port *uport;
@@ -1838,7 +1838,7 @@ static const struct dev_pm_ops msm_hs_dev_pm_ops = {
 
 static struct platform_driver msm_serial_hs_platform_driver = {
 	.probe = msm_hs_probe,
-	.remove = __devexit_p(msm_hs_remove),
+	.remove = msm_hs_remove,
 	.driver = {
 		.name = "msm_serial_hs",
 		.owner = THIS_MODULE,
diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c
index 7ea8a263fd9..e2775b6df5a 100644
--- a/drivers/tty/serial/mux.c
+++ b/drivers/tty/serial/mux.c
@@ -520,7 +520,7 @@ static int __init mux_probe(struct parisc_device *dev)
 	return 0;
 }
 
-static int __devexit mux_remove(struct parisc_device *dev)
+static int mux_remove(struct parisc_device *dev)
 {
 	int i, j;
 	int port_count = (long)dev_get_drvdata(&dev->dev);
@@ -571,14 +571,14 @@ static struct parisc_driver builtin_serial_mux_driver = {
 	.name =		"builtin_serial_mux",
 	.id_table =	builtin_mux_tbl,
 	.probe =	mux_probe,
-	.remove =       __devexit_p(mux_remove),
+	.remove =       mux_remove,
 };
 
 static struct parisc_driver serial_mux_driver = {
 	.name =		"serial_mux",
 	.id_table =	mux_tbl,
 	.probe =	mux_probe,
-	.remove =       __devexit_p(mux_remove),
+	.remove =       mux_remove,
 };
 
 /**
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 6db3baa39a9..6db23b035ef 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -34,6 +34,8 @@
 #include <linux/io.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/of_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/fsl/mxs-dma.h>
 
 #include <asm/cacheflush.h>
 
@@ -71,6 +73,15 @@
 
 #define AUART_CTRL0_SFTRST			(1 << 31)
 #define AUART_CTRL0_CLKGATE			(1 << 30)
+#define AUART_CTRL0_RXTO_ENABLE			(1 << 27)
+#define AUART_CTRL0_RXTIMEOUT(v)		(((v) & 0x7ff) << 16)
+#define AUART_CTRL0_XFER_COUNT(v)		((v) & 0xffff)
+
+#define AUART_CTRL1_XFER_COUNT(v)		((v) & 0xffff)
+
+#define AUART_CTRL2_DMAONERR			(1 << 26)
+#define AUART_CTRL2_TXDMAE			(1 << 25)
+#define AUART_CTRL2_RXDMAE			(1 << 24)
 
 #define AUART_CTRL2_CTSEN			(1 << 15)
 #define AUART_CTRL2_RTSEN			(1 << 14)
@@ -111,29 +122,170 @@
 #define AUART_STAT_BERR				(1 << 18)
 #define AUART_STAT_PERR				(1 << 17)
 #define AUART_STAT_FERR				(1 << 16)
+#define AUART_STAT_RXCOUNT_MASK			0xffff
 
 static struct uart_driver auart_driver;
 
+enum mxs_auart_type {
+	IMX23_AUART,
+	IMX28_AUART,
+};
+
 struct mxs_auart_port {
 	struct uart_port port;
 
-	unsigned int flags;
+#define MXS_AUART_DMA_CONFIG	0x1
+#define MXS_AUART_DMA_ENABLED	0x2
+#define MXS_AUART_DMA_TX_SYNC	2  /* bit 2 */
+#define MXS_AUART_DMA_RX_READY	3  /* bit 3 */
+	unsigned long flags;
 	unsigned int ctrl;
+	enum mxs_auart_type devtype;
 
 	unsigned int irq;
 
 	struct clk *clk;
 	struct device *dev;
+
+	/* for DMA */
+	struct mxs_dma_data dma_data;
+	int dma_channel_rx, dma_channel_tx;
+	int dma_irq_rx, dma_irq_tx;
+	int dma_channel;
+
+	struct scatterlist tx_sgl;
+	struct dma_chan	*tx_dma_chan;
+	void *tx_dma_buf;
+
+	struct scatterlist rx_sgl;
+	struct dma_chan	*rx_dma_chan;
+	void *rx_dma_buf;
+};
+
+static struct platform_device_id mxs_auart_devtype[] = {
+	{ .name = "mxs-auart-imx23", .driver_data = IMX23_AUART },
+	{ .name = "mxs-auart-imx28", .driver_data = IMX28_AUART },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, mxs_auart_devtype);
+
+static struct of_device_id mxs_auart_dt_ids[] = {
+	{
+		.compatible = "fsl,imx28-auart",
+		.data = &mxs_auart_devtype[IMX28_AUART]
+	}, {
+		.compatible = "fsl,imx23-auart",
+		.data = &mxs_auart_devtype[IMX23_AUART]
+	}, { /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids);
+
+static inline int is_imx28_auart(struct mxs_auart_port *s)
+{
+	return s->devtype == IMX28_AUART;
+}
+
+static inline bool auart_dma_enabled(struct mxs_auart_port *s)
+{
+	return s->flags & MXS_AUART_DMA_ENABLED;
+}
 
 static void mxs_auart_stop_tx(struct uart_port *u);
 
 #define to_auart_port(u) container_of(u, struct mxs_auart_port, port)
 
-static inline void mxs_auart_tx_chars(struct mxs_auart_port *s)
+static void mxs_auart_tx_chars(struct mxs_auart_port *s);
+
+static void dma_tx_callback(void *param)
 {
+	struct mxs_auart_port *s = param;
 	struct circ_buf *xmit = &s->port.state->xmit;
 
+	dma_unmap_sg(s->dev, &s->tx_sgl, 1, DMA_TO_DEVICE);
+
+	/* clear the bit used to serialize the DMA tx. */
+	clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags);
+	smp_mb__after_clear_bit();
+
+	/* wake up the possible processes. */
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(&s->port);
+
+	mxs_auart_tx_chars(s);
+}
+
+static int mxs_auart_dma_tx(struct mxs_auart_port *s, int size)
+{
+	struct dma_async_tx_descriptor *desc;
+	struct scatterlist *sgl = &s->tx_sgl;
+	struct dma_chan *channel = s->tx_dma_chan;
+	u32 pio;
+
+	/* [1] : send PIO. Note, the first pio word is CTRL1. */
+	pio = AUART_CTRL1_XFER_COUNT(size);
+	desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)&pio,
+					1, DMA_TRANS_NONE, 0);
+	if (!desc) {
+		dev_err(s->dev, "step 1 error\n");
+		return -EINVAL;
+	}
+
+	/* [2] : set DMA buffer. */
+	sg_init_one(sgl, s->tx_dma_buf, size);
+	dma_map_sg(s->dev, sgl, 1, DMA_TO_DEVICE);
+	desc = dmaengine_prep_slave_sg(channel, sgl,
+			1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc) {
+		dev_err(s->dev, "step 2 error\n");
+		return -EINVAL;
+	}
+
+	/* [3] : submit the DMA */
+	desc->callback = dma_tx_callback;
+	desc->callback_param = s;
+	dmaengine_submit(desc);
+	dma_async_issue_pending(channel);
+	return 0;
+}
+
+static void mxs_auart_tx_chars(struct mxs_auart_port *s)
+{
+	struct circ_buf *xmit = &s->port.state->xmit;
+
+	if (auart_dma_enabled(s)) {
+		int i = 0;
+		int size;
+		void *buffer = s->tx_dma_buf;
+
+		if (test_and_set_bit(MXS_AUART_DMA_TX_SYNC, &s->flags))
+			return;
+
+		while (!uart_circ_empty(xmit) && !uart_tx_stopped(&s->port)) {
+			size = min_t(u32, UART_XMIT_SIZE - i,
+				     CIRC_CNT_TO_END(xmit->head,
+						     xmit->tail,
+						     UART_XMIT_SIZE));
+			memcpy(buffer + i, xmit->buf + xmit->tail, size);
+			xmit->tail = (xmit->tail + size) & (UART_XMIT_SIZE - 1);
+
+			i += size;
+			if (i >= UART_XMIT_SIZE)
+				break;
+		}
+
+		if (uart_tx_stopped(&s->port))
+			mxs_auart_stop_tx(&s->port);
+
+		if (i) {
+			mxs_auart_dma_tx(s, i);
+		} else {
+			clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags);
+			smp_mb__after_clear_bit();
+		}
+		return;
+	}
+
+
 	while (!(readl(s->port.membase + AUART_STAT) &
 		 AUART_STAT_TXFF)) {
 		if (s->port.x_char) {
@@ -287,10 +439,159 @@ static u32 mxs_auart_get_mctrl(struct uart_port *u)
 	return mctrl;
 }
 
+static bool mxs_auart_dma_filter(struct dma_chan *chan, void *param)
+{
+	struct mxs_auart_port *s = param;
+
+	if (!mxs_dma_is_apbx(chan))
+		return false;
+
+	if (s->dma_channel == chan->chan_id) {
+		chan->private = &s->dma_data;
+		return true;
+	}
+	return false;
+}
+
+static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s);
+static void dma_rx_callback(void *arg)
+{
+	struct mxs_auart_port *s = (struct mxs_auart_port *) arg;
+	struct tty_struct *tty = s->port.state->port.tty;
+	int count;
+	u32 stat;
+
+	dma_unmap_sg(s->dev, &s->rx_sgl, 1, DMA_FROM_DEVICE);
+
+	stat = readl(s->port.membase + AUART_STAT);
+	stat &= ~(AUART_STAT_OERR | AUART_STAT_BERR |
+			AUART_STAT_PERR | AUART_STAT_FERR);
+
+	count = stat & AUART_STAT_RXCOUNT_MASK;
+	tty_insert_flip_string(tty, s->rx_dma_buf, count);
+
+	writel(stat, s->port.membase + AUART_STAT);
+	tty_flip_buffer_push(tty);
+
+	/* start the next DMA for RX. */
+	mxs_auart_dma_prep_rx(s);
+}
+
+static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s)
+{
+	struct dma_async_tx_descriptor *desc;
+	struct scatterlist *sgl = &s->rx_sgl;
+	struct dma_chan *channel = s->rx_dma_chan;
+	u32 pio[1];
+
+	/* [1] : send PIO */
+	pio[0] = AUART_CTRL0_RXTO_ENABLE
+		| AUART_CTRL0_RXTIMEOUT(0x80)
+		| AUART_CTRL0_XFER_COUNT(UART_XMIT_SIZE);
+	desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio,
+					1, DMA_TRANS_NONE, 0);
+	if (!desc) {
+		dev_err(s->dev, "step 1 error\n");
+		return -EINVAL;
+	}
+
+	/* [2] : send DMA request */
+	sg_init_one(sgl, s->rx_dma_buf, UART_XMIT_SIZE);
+	dma_map_sg(s->dev, sgl, 1, DMA_FROM_DEVICE);
+	desc = dmaengine_prep_slave_sg(channel, sgl, 1, DMA_DEV_TO_MEM,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc) {
+		dev_err(s->dev, "step 2 error\n");
+		return -1;
+	}
+
+	/* [3] : submit the DMA, but do not issue it. */
+	desc->callback = dma_rx_callback;
+	desc->callback_param = s;
+	dmaengine_submit(desc);
+	dma_async_issue_pending(channel);
+	return 0;
+}
+
+static void mxs_auart_dma_exit_channel(struct mxs_auart_port *s)
+{
+	if (s->tx_dma_chan) {
+		dma_release_channel(s->tx_dma_chan);
+		s->tx_dma_chan = NULL;
+	}
+	if (s->rx_dma_chan) {
+		dma_release_channel(s->rx_dma_chan);
+		s->rx_dma_chan = NULL;
+	}
+
+	kfree(s->tx_dma_buf);
+	kfree(s->rx_dma_buf);
+	s->tx_dma_buf = NULL;
+	s->rx_dma_buf = NULL;
+}
+
+static void mxs_auart_dma_exit(struct mxs_auart_port *s)
+{
+
+	writel(AUART_CTRL2_TXDMAE | AUART_CTRL2_RXDMAE | AUART_CTRL2_DMAONERR,
+		s->port.membase + AUART_CTRL2_CLR);
+
+	mxs_auart_dma_exit_channel(s);
+	s->flags &= ~MXS_AUART_DMA_ENABLED;
+	clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags);
+	clear_bit(MXS_AUART_DMA_RX_READY, &s->flags);
+}
+
+static int mxs_auart_dma_init(struct mxs_auart_port *s)
+{
+	dma_cap_mask_t mask;
+
+	if (auart_dma_enabled(s))
+		return 0;
+
+	/* We do not get the right DMA channels. */
+	if (s->dma_channel_rx == -1 || s->dma_channel_rx == -1)
+		return -EINVAL;
+
+	/* init for RX */
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	s->dma_channel = s->dma_channel_rx;
+	s->dma_data.chan_irq = s->dma_irq_rx;
+	s->rx_dma_chan = dma_request_channel(mask, mxs_auart_dma_filter, s);
+	if (!s->rx_dma_chan)
+		goto err_out;
+	s->rx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA);
+	if (!s->rx_dma_buf)
+		goto err_out;
+
+	/* init for TX */
+	s->dma_channel = s->dma_channel_tx;
+	s->dma_data.chan_irq = s->dma_irq_tx;
+	s->tx_dma_chan = dma_request_channel(mask, mxs_auart_dma_filter, s);
+	if (!s->tx_dma_chan)
+		goto err_out;
+	s->tx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA);
+	if (!s->tx_dma_buf)
+		goto err_out;
+
+	/* set the flags */
+	s->flags |= MXS_AUART_DMA_ENABLED;
+	dev_dbg(s->dev, "enabled the DMA support.");
+
+	return 0;
+
+err_out:
+	mxs_auart_dma_exit_channel(s);
+	return -EINVAL;
+
+}
+
 static void mxs_auart_settermios(struct uart_port *u,
 				 struct ktermios *termios,
 				 struct ktermios *old)
 {
+	struct mxs_auart_port *s = to_auart_port(u);
 	u32 bm, ctrl, ctrl2, div;
 	unsigned int cflag, baud;
 
@@ -362,10 +663,23 @@ static void mxs_auart_settermios(struct uart_port *u,
 		ctrl |= AUART_LINECTRL_STP2;
 
 	/* figure out the hardware flow control settings */
-	if (cflag & CRTSCTS)
+	if (cflag & CRTSCTS) {
+		/*
+		 * The DMA has a bug(see errata:2836) in mx23.
+		 * So we can not implement the DMA for auart in mx23,
+		 * we can only implement the DMA support for auart
+		 * in mx28.
+		 */
+		if (is_imx28_auart(s) && (s->flags & MXS_AUART_DMA_CONFIG)) {
+			if (!mxs_auart_dma_init(s))
+				/* enable DMA tranfer */
+				ctrl2 |= AUART_CTRL2_TXDMAE | AUART_CTRL2_RXDMAE
+				       | AUART_CTRL2_DMAONERR;
+		}
 		ctrl2 |= AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN;
-	else
+	} else {
 		ctrl2 &= ~(AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN);
+	}
 
 	/* set baud rate */
 	baud = uart_get_baud_rate(u, termios, old, 0, u->uartclk);
@@ -377,6 +691,19 @@ static void mxs_auart_settermios(struct uart_port *u,
 	writel(ctrl2, u->membase + AUART_CTRL2);
 
 	uart_update_timeout(u, termios->c_cflag, baud);
+
+	/* prepare for the DMA RX. */
+	if (auart_dma_enabled(s) &&
+		!test_and_set_bit(MXS_AUART_DMA_RX_READY, &s->flags)) {
+		if (!mxs_auart_dma_prep_rx(s)) {
+			/* Disable the normal RX interrupt. */
+			writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN,
+					u->membase + AUART_INTR_CLR);
+		} else {
+			mxs_auart_dma_exit(s);
+			dev_err(s->dev, "We can not start up the DMA.\n");
+		}
+	}
 }
 
 static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
@@ -395,7 +722,8 @@ static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
 	}
 
 	if (istat & (AUART_INTR_RTIS | AUART_INTR_RXIS)) {
-		mxs_auart_rx_chars(s);
+		if (!auart_dma_enabled(s))
+			mxs_auart_rx_chars(s);
 		istat &= ~(AUART_INTR_RTIS | AUART_INTR_RXIS);
 	}
 
@@ -455,6 +783,9 @@ static void mxs_auart_shutdown(struct uart_port *u)
 {
 	struct mxs_auart_port *s = to_auart_port(u);
 
+	if (auart_dma_enabled(s))
+		mxs_auart_dma_exit(s);
+
 	writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_CLR);
 
 	writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN,
@@ -688,6 +1019,7 @@ static int serial_mxs_probe_dt(struct mxs_auart_port *s,
 		struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
+	u32 dma_channel[2];
 	int ret;
 
 	if (!np)
@@ -701,11 +1033,27 @@ static int serial_mxs_probe_dt(struct mxs_auart_port *s,
 	}
 	s->port.line = ret;
 
+	s->dma_irq_rx = platform_get_irq(pdev, 1);
+	s->dma_irq_tx = platform_get_irq(pdev, 2);
+
+	ret = of_property_read_u32_array(np, "fsl,auart-dma-channel",
+					dma_channel, 2);
+	if (ret == 0) {
+		s->dma_channel_rx = dma_channel[0];
+		s->dma_channel_tx = dma_channel[1];
+
+		s->flags |= MXS_AUART_DMA_CONFIG;
+	} else {
+		s->dma_channel_rx = -1;
+		s->dma_channel_tx = -1;
+	}
 	return 0;
 }
 
-static int __devinit mxs_auart_probe(struct platform_device *pdev)
+static int mxs_auart_probe(struct platform_device *pdev)
 {
+	const struct of_device_id *of_id =
+			of_match_device(mxs_auart_dt_ids, &pdev->dev);
 	struct mxs_auart_port *s;
 	u32 version;
 	int ret = 0;
@@ -730,6 +1078,11 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev)
 		goto out_free;
 	}
 
+	if (of_id) {
+		pdev->id_entry = of_id->data;
+		s->devtype = pdev->id_entry->driver_data;
+	}
+
 	s->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(s->clk)) {
 		ret = PTR_ERR(s->clk);
@@ -751,7 +1104,6 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev)
 	s->port.type = PORT_IMX;
 	s->port.dev = s->dev = get_device(&pdev->dev);
 
-	s->flags = 0;
 	s->ctrl = 0;
 
 	s->irq = platform_get_irq(pdev, 0);
@@ -789,7 +1141,7 @@ out:
 	return ret;
 }
 
-static int __devexit mxs_auart_remove(struct platform_device *pdev)
+static int mxs_auart_remove(struct platform_device *pdev)
 {
 	struct mxs_auart_port *s = platform_get_drvdata(pdev);
 
@@ -805,15 +1157,9 @@ static int __devexit mxs_auart_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct of_device_id mxs_auart_dt_ids[] = {
-	{ .compatible = "fsl,imx23-auart", },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids);
-
 static struct platform_driver mxs_auart_driver = {
 	.probe = mxs_auart_probe,
-	.remove = __devexit_p(mxs_auart_remove),
+	.remove = mxs_auart_remove,
 	.driver = {
 		.name = "mxs-auart",
 		.owner = THIS_MODULE,
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index df443b908ca..e7cae1c2d7d 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -21,8 +21,10 @@
 #include <linux/of_serial.h>
 #include <linux/of_platform.h>
 #include <linux/nwpserial.h>
+#include <linux/clk.h>
 
 struct of_serial_info {
+	struct clk *clk;
 	int type;
 	int line;
 };
@@ -50,8 +52,9 @@ EXPORT_SYMBOL_GPL(tegra_serial_handle_break);
 /*
  * Fill a struct uart_port for a given device node
  */
-static int __devinit of_platform_serial_setup(struct platform_device *ofdev,
-					int type, struct uart_port *port)
+static int of_platform_serial_setup(struct platform_device *ofdev,
+			int type, struct uart_port *port,
+			struct of_serial_info *info)
 {
 	struct resource resource;
 	struct device_node *np = ofdev->dev.of_node;
@@ -60,8 +63,17 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev,
 
 	memset(port, 0, sizeof *port);
 	if (of_property_read_u32(np, "clock-frequency", &clk)) {
-		dev_warn(&ofdev->dev, "no clock-frequency property set\n");
-		return -ENODEV;
+
+		/* Get clk rate through clk driver if present */
+		info->clk = clk_get(&ofdev->dev, NULL);
+		if (IS_ERR(info->clk)) {
+			dev_warn(&ofdev->dev,
+				"clk or clock-frequency not defined\n");
+			return PTR_ERR(info->clk);
+		}
+
+		clk_prepare_enable(info->clk);
+		clk = clk_get_rate(info->clk);
 	}
 	/* If current-speed was set, then try not to change it. */
 	if (of_property_read_u32(np, "current-speed", &spd) == 0)
@@ -70,7 +82,7 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev,
 	ret = of_address_to_resource(np, 0, &resource);
 	if (ret) {
 		dev_warn(&ofdev->dev, "invalid address\n");
-		return ret;
+		goto out;
 	}
 
 	spin_lock_init(&port->lock);
@@ -97,7 +109,8 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev,
 		default:
 			dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n",
 				 prop);
-			return -EINVAL;
+			ret = -EINVAL;
+			goto out;
 		}
 	}
 
@@ -115,13 +128,17 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev,
 		port->handle_break = tegra_serial_handle_break;
 
 	return 0;
+out:
+	if (info->clk)
+		clk_disable_unprepare(info->clk);
+	return ret;
 }
 
 /*
  * Try to register a serial port
  */
 static struct of_device_id of_platform_serial_table[];
-static int __devinit of_platform_serial_probe(struct platform_device *ofdev)
+static int of_platform_serial_probe(struct platform_device *ofdev)
 {
 	const struct of_device_id *match;
 	struct of_serial_info *info;
@@ -141,7 +158,7 @@ static int __devinit of_platform_serial_probe(struct platform_device *ofdev)
 		return -ENOMEM;
 
 	port_type = (unsigned long)match->data;
-	ret = of_platform_serial_setup(ofdev, port_type, &port);
+	ret = of_platform_serial_setup(ofdev, port_type, &port, info);
 	if (ret)
 		goto out;
 
@@ -204,6 +221,9 @@ static int of_platform_serial_remove(struct platform_device *ofdev)
 		/* need to add code for these */
 		break;
 	}
+
+	if (info->clk)
+		clk_disable_unprepare(info->clk);
 	kfree(info);
 	return 0;
 }
@@ -211,7 +231,7 @@ static int of_platform_serial_remove(struct platform_device *ofdev)
 /*
  * A few common types, add more as needed.
  */
-static struct of_device_id __devinitdata of_platform_serial_table[] = {
+static struct of_device_id of_platform_serial_table[] = {
 	{ .compatible = "ns8250",   .data = (void *)PORT_8250, },
 	{ .compatible = "ns16450",  .data = (void *)PORT_16450, },
 	{ .compatible = "ns16550a", .data = (void *)PORT_16550A, },
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 6d3d26a607b..b538e2e4ae5 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -96,7 +96,7 @@ struct uart_omap_port {
 	unsigned char		msr_saved_flags;
 	char			name[20];
 	unsigned long		port_activity;
-	u32			context_loss_cnt;
+	int			context_loss_cnt;
 	u32			errata;
 	u8			wakeups_enabled;
 	unsigned int		irq_pending:1;
@@ -702,11 +702,7 @@ serial_omap_configure_xonxoff
 	serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 	serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG);
-	/* Enable special char function UARTi.EFR_REG[5] and
-	 * load the new software flow control mode IXON or IXOFF
-	 * and restore the UARTi.EFR_REG[4] ENHANCED_EN value.
-	 */
-	serial_out(up, UART_EFR, up->efr | UART_EFR_SCD);
+
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
 
 	serial_out(up, UART_MCR, up->mcr & ~UART_MCR_TCRTLR);
@@ -1081,7 +1077,7 @@ out:
 
 #ifdef CONFIG_SERIAL_OMAP_CONSOLE
 
-static struct uart_omap_port *serial_omap_console_ports[4];
+static struct uart_omap_port *serial_omap_console_ports[OMAP_MAX_HSUART_PORTS];
 
 static struct uart_driver serial_omap_reg;
 
@@ -1242,7 +1238,7 @@ static int serial_omap_resume(struct device *dev)
 }
 #endif
 
-static void __devinit omap_serial_fill_features_erratas(struct uart_omap_port *up)
+static void omap_serial_fill_features_erratas(struct uart_omap_port *up)
 {
 	u32 mvr, scheme;
 	u16 revision, major, minor;
@@ -1295,7 +1291,7 @@ static void __devinit omap_serial_fill_features_erratas(struct uart_omap_port *u
 	}
 }
 
-static __devinit struct omap_uart_port_info *of_get_uart_port_info(struct device *dev)
+static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev)
 {
 	struct omap_uart_port_info *omap_up_info;
 
@@ -1308,7 +1304,7 @@ static __devinit struct omap_uart_port_info *of_get_uart_port_info(struct device
 	return omap_up_info;
 }
 
-static int __devinit serial_omap_probe(struct platform_device *pdev)
+static int serial_omap_probe(struct platform_device *pdev)
 {
 	struct uart_omap_port	*up;
 	struct resource		*mem, *irq;
@@ -1445,7 +1441,7 @@ err_port_line:
 	return ret;
 }
 
-static int __devexit serial_omap_remove(struct platform_device *dev)
+static int serial_omap_remove(struct platform_device *dev)
 {
 	struct uart_omap_port *up = platform_get_drvdata(dev);
 
@@ -1556,11 +1552,15 @@ static int serial_omap_runtime_resume(struct device *dev)
 {
 	struct uart_omap_port *up = dev_get_drvdata(dev);
 
-	u32 loss_cnt = serial_omap_get_context_loss_count(up);
+	int loss_cnt = serial_omap_get_context_loss_count(up);
 
-	if (up->context_loss_cnt != loss_cnt)
+	if (loss_cnt < 0) {
+		dev_err(dev, "serial_omap_get_context_loss_count failed : %d\n",
+			loss_cnt);
 		serial_omap_restore_context(up);
-
+	} else if (up->context_loss_cnt != loss_cnt) {
+		serial_omap_restore_context(up);
+	}
 	up->latency = up->calc_latency;
 	schedule_work(&up->qos_work);
 
@@ -1586,7 +1586,7 @@ MODULE_DEVICE_TABLE(of, omap_serial_of_match);
 
 static struct platform_driver serial_omap_driver = {
 	.probe          = serial_omap_probe,
-	.remove         = __devexit_p(serial_omap_remove),
+	.remove         = serial_omap_remove,
 	.driver		= {
 		.name	= DRIVER_NAME,
 		.pm	= &serial_omap_dev_pm_ops,
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 4cd6c238152..8318925fbf6 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1839,7 +1839,7 @@ static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = {
 	{0,},
 };
 
-static int __devinit pch_uart_pci_probe(struct pci_dev *pdev,
+static int pch_uart_pci_probe(struct pci_dev *pdev,
 					const struct pci_device_id *id)
 {
 	int ret;
@@ -1869,7 +1869,7 @@ static struct pci_driver pch_uart_pci_driver = {
 	.name = "pch_uart",
 	.id_table = pch_uart_pci_id,
 	.probe = pch_uart_pci_probe,
-	.remove = __devexit_p(pch_uart_pci_remove),
+	.remove = pch_uart_pci_remove,
 	.suspend = pch_uart_pci_suspend,
 	.resume = pch_uart_pci_resume,
 };
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 9033fc6e0e4..2764828251f 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -705,6 +705,57 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
 	clk_disable_unprepare(up->clk);
 }
 
+#ifdef CONFIG_CONSOLE_POLL
+/*
+ * Console polling routines for writing and reading from the uart while
+ * in an interrupt or debug context.
+ */
+
+static int serial_pxa_get_poll_char(struct uart_port *port)
+{
+	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+	unsigned char lsr = serial_in(up, UART_LSR);
+
+	while (!(lsr & UART_LSR_DR))
+		lsr = serial_in(up, UART_LSR);
+
+	return serial_in(up, UART_RX);
+}
+
+
+static void serial_pxa_put_poll_char(struct uart_port *port,
+			 unsigned char c)
+{
+	unsigned int ier;
+	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+
+	/*
+	 *	First save the IER then disable the interrupts
+	 */
+	ier = serial_in(up, UART_IER);
+	serial_out(up, UART_IER, UART_IER_UUE);
+
+	wait_for_xmitr(up);
+	/*
+	 *	Send the character out.
+	 *	If a LF, also do CR...
+	 */
+	serial_out(up, UART_TX, c);
+	if (c == 10) {
+		wait_for_xmitr(up);
+		serial_out(up, UART_TX, 13);
+	}
+
+	/*
+	 *	Finally, wait for transmitter to become empty
+	 *	and restore the IER
+	 */
+	wait_for_xmitr(up);
+	serial_out(up, UART_IER, ier);
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
+
 static int __init
 serial_pxa_console_setup(struct console *co, char *options)
 {
@@ -759,6 +810,10 @@ struct uart_ops serial_pxa_pops = {
 	.request_port	= serial_pxa_request_port,
 	.config_port	= serial_pxa_config_port,
 	.verify_port	= serial_pxa_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char = serial_pxa_get_poll_char,
+	.poll_put_char = serial_pxa_put_poll_char,
+#endif
 };
 
 static struct uart_driver serial_pxa_reg = {
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index 2ca5959ec3f..da56c8a0fdc 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -637,7 +637,7 @@ static void __init sa1100_init_ports(void)
 	PPSR |= PPC_TXD1 | PPC_TXD3;
 }
 
-void __devinit sa1100_register_uart_fns(struct sa1100_port_fns *fns)
+void sa1100_register_uart_fns(struct sa1100_port_fns *fns)
 {
 	if (fns->get_mctrl)
 		sa1100_pops.get_mctrl = fns->get_mctrl;
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 7f04717176a..fb0e0f0bed0 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -223,8 +223,11 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id)
 	struct uart_port *port = &ourport->port;
 	struct tty_struct *tty = port->state->port.tty;
 	unsigned int ufcon, ch, flag, ufstat, uerstat;
+	unsigned long flags;
 	int max_count = 64;
 
+	spin_lock_irqsave(&port->lock, flags);
+
 	while (max_count-- > 0) {
 		ufcon = rd_regl(port, S3C2410_UFCON);
 		ufstat = rd_regl(port, S3C2410_UFSTAT);
@@ -299,6 +302,7 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id)
 	tty_flip_buffer_push(tty);
 
  out:
+	spin_unlock_irqrestore(&port->lock, flags);
 	return IRQ_HANDLED;
 }
 
@@ -307,8 +311,11 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
 	struct s3c24xx_uart_port *ourport = id;
 	struct uart_port *port = &ourport->port;
 	struct circ_buf *xmit = &port->state->xmit;
+	unsigned long flags;
 	int count = 256;
 
+	spin_lock_irqsave(&port->lock, flags);
+
 	if (port->x_char) {
 		wr_regb(port, S3C2410_UTXH, port->x_char);
 		port->icount.tx++;
@@ -336,13 +343,17 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
 		port->icount.tx++;
 	}
 
-	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
+		spin_unlock(&port->lock);
 		uart_write_wakeup(port);
+		spin_lock(&port->lock);
+	}
 
 	if (uart_circ_empty(xmit))
 		s3c24xx_serial_stop_tx(port);
 
  out:
+	spin_unlock_irqrestore(&port->lock, flags);
 	return IRQ_HANDLED;
 }
 
@@ -352,10 +363,8 @@ static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id)
 	struct s3c24xx_uart_port *ourport = id;
 	struct uart_port *port = &ourport->port;
 	unsigned int pend = rd_regl(port, S3C64XX_UINTP);
-	unsigned long flags;
 	irqreturn_t ret = IRQ_HANDLED;
 
-	spin_lock_irqsave(&port->lock, flags);
 	if (pend & S3C64XX_UINTM_RXD_MSK) {
 		ret = s3c24xx_serial_rx_chars(irq, id);
 		wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_RXD_MSK);
@@ -364,7 +373,6 @@ static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id)
 		ret = s3c24xx_serial_tx_chars(irq, id);
 		wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_TXD_MSK);
 	}
-	spin_unlock_irqrestore(&port->lock, flags);
 	return ret;
 }
 
@@ -530,16 +538,16 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
 	switch (level) {
 	case 3:
 		if (!IS_ERR(ourport->baudclk))
-			clk_disable(ourport->baudclk);
+			clk_disable_unprepare(ourport->baudclk);
 
-		clk_disable(ourport->clk);
+		clk_disable_unprepare(ourport->clk);
 		break;
 
 	case 0:
-		clk_enable(ourport->clk);
+		clk_prepare_enable(ourport->clk);
 
 		if (!IS_ERR(ourport->baudclk))
-			clk_enable(ourport->baudclk);
+			clk_prepare_enable(ourport->baudclk);
 
 		break;
 	default:
@@ -713,11 +721,11 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 		s3c24xx_serial_setsource(port, clk_sel);
 
 		if (!IS_ERR(ourport->baudclk)) {
-			clk_disable(ourport->baudclk);
+			clk_disable_unprepare(ourport->baudclk);
 			ourport->baudclk = ERR_PTR(-EINVAL);
 		}
 
-		clk_enable(clk);
+		clk_prepare_enable(clk);
 
 		ourport->baudclk = clk;
 		ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
@@ -1256,7 +1264,7 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int __devexit s3c24xx_serial_remove(struct platform_device *dev)
+static int s3c24xx_serial_remove(struct platform_device *dev)
 {
 	struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
 
@@ -1287,9 +1295,9 @@ static int s3c24xx_serial_resume(struct device *dev)
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
 
 	if (port) {
-		clk_enable(ourport->clk);
+		clk_prepare_enable(ourport->clk);
 		s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
-		clk_disable(ourport->clk);
+		clk_disable_unprepare(ourport->clk);
 
 		uart_resume_port(&s3c24xx_uart_drv, port);
 	}
@@ -1701,6 +1709,16 @@ MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids);
 
 #ifdef CONFIG_OF
 static const struct of_device_id s3c24xx_uart_dt_match[] = {
+	{ .compatible = "samsung,s3c2410-uart",
+		.data = (void *)S3C2410_SERIAL_DRV_DATA },
+	{ .compatible = "samsung,s3c2412-uart",
+		.data = (void *)S3C2412_SERIAL_DRV_DATA },
+	{ .compatible = "samsung,s3c2440-uart",
+		.data = (void *)S3C2440_SERIAL_DRV_DATA },
+	{ .compatible = "samsung,s3c6400-uart",
+		.data = (void *)S3C6400_SERIAL_DRV_DATA },
+	{ .compatible = "samsung,s5pv210-uart",
+		.data = (void *)S5PV210_SERIAL_DRV_DATA },
 	{ .compatible = "samsung,exynos4210-uart",
 		.data = (void *)EXYNOS4210_SERIAL_DRV_DATA },
 	{},
@@ -1712,7 +1730,7 @@ MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
 
 static struct platform_driver samsung_serial_driver = {
 	.probe		= s3c24xx_serial_probe,
-	.remove		= __devexit_p(s3c24xx_serial_remove),
+	.remove		= s3c24xx_serial_remove,
 	.id_table	= s3c24xx_serial_driver_ids,
 	.driver		= {
 		.name	= "samsung-uart",
diff --git a/drivers/tty/serial/sc26xx.c b/drivers/tty/serial/sc26xx.c
index 9d664242b31..aced1dd923d 100644
--- a/drivers/tty/serial/sc26xx.c
+++ b/drivers/tty/serial/sc26xx.c
@@ -621,7 +621,7 @@ static u8 sc26xx_flags2mask(unsigned int flags, unsigned int bitpos)
 	return bit ? (1 << (bit - 1)) : 0;
 }
 
-static void __devinit sc26xx_init_masks(struct uart_sc26xx_port *up,
+static void sc26xx_init_masks(struct uart_sc26xx_port *up,
 					int line, unsigned int data)
 {
 	up->dtr_mask[line] = sc26xx_flags2mask(data,  0);
@@ -632,7 +632,7 @@ static void __devinit sc26xx_init_masks(struct uart_sc26xx_port *up,
 	up->ri_mask[line]  = sc26xx_flags2mask(data, 20);
 }
 
-static int __devinit sc26xx_probe(struct platform_device *dev)
+static int sc26xx_probe(struct platform_device *dev)
 {
 	struct resource *res;
 	struct uart_sc26xx_port *up;
@@ -733,7 +733,7 @@ static int __exit sc26xx_driver_remove(struct platform_device *dev)
 
 static struct platform_driver sc26xx_driver = {
 	.probe	= sc26xx_probe,
-	.remove	= __devexit_p(sc26xx_driver_remove),
+	.remove	= sc26xx_driver_remove,
 	.driver	= {
 		.name	= "SC26xx",
 		.owner	= THIS_MODULE,
diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c
index e821068cd95..418b495e323 100644
--- a/drivers/tty/serial/sccnxp.c
+++ b/drivers/tty/serial/sccnxp.c
@@ -740,7 +740,7 @@ static int sccnxp_console_setup(struct console *co, char *options)
 }
 #endif
 
-static int __devinit sccnxp_probe(struct platform_device *pdev)
+static int sccnxp_probe(struct platform_device *pdev)
 {
 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	int chiptype = pdev->id_entry->driver_data;
@@ -943,7 +943,7 @@ err_out:
 	return ret;
 }
 
-static int __devexit sccnxp_remove(struct platform_device *pdev)
+static int sccnxp_remove(struct platform_device *pdev)
 {
 	int i;
 	struct sccnxp_port *s = platform_get_drvdata(pdev);
@@ -981,7 +981,7 @@ static struct platform_driver sccnxp_uart_driver = {
 		.owner	= THIS_MODULE,
 	},
 	.probe		= sccnxp_probe,
-	.remove		= __devexit_p(sccnxp_remove),
+	.remove		= sccnxp_remove,
 	.id_table	= sccnxp_id_table,
 };
 module_platform_driver(sccnxp_uart_driver);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 0fcfd98a956..fb5aa42fde7 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -634,10 +634,10 @@ static void uart_unthrottle(struct tty_struct *tty)
 		uart_set_mctrl(port, TIOCM_RTS);
 }
 
-static void uart_get_info(struct tty_port *port,
-                        struct uart_state *state,
+static void do_uart_get_info(struct tty_port *port,
 			struct serial_struct *retinfo)
 {
+	struct uart_state *state = container_of(port, struct uart_state, port);
 	struct uart_port *uport = state->uart_port;
 
 	memset(retinfo, 0, sizeof(*retinfo));
@@ -662,17 +662,21 @@ static void uart_get_info(struct tty_port *port,
 	retinfo->iomem_base      = (void *)(unsigned long)uport->mapbase;
 }
 
-static int uart_get_info_user(struct uart_state *state,
-			 struct serial_struct __user *retinfo)
+static void uart_get_info(struct tty_port *port,
+			struct serial_struct *retinfo)
 {
-	struct tty_port *port = &state->port;
-	struct serial_struct tmp;
-
 	/* Ensure the state we copy is consistent and no hardware changes
 	   occur as we go */
 	mutex_lock(&port->mutex);
-	uart_get_info(port, state, &tmp);
+	do_uart_get_info(port, retinfo);
 	mutex_unlock(&port->mutex);
+}
+
+static int uart_get_info_user(struct tty_port *port,
+			 struct serial_struct __user *retinfo)
+{
+	struct serial_struct tmp;
+	uart_get_info(port, &tmp);
 
 	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
 		return -EFAULT;
@@ -1131,7 +1135,7 @@ uart_ioctl(struct tty_struct *tty, unsigned int cmd,
 	 */
 	switch (cmd) {
 	case TIOCGSERIAL:
-		ret = uart_get_info_user(state, uarg);
+		ret = uart_get_info_user(port, uarg);
 		break;
 
 	case TIOCSSERIAL:
@@ -2293,6 +2297,8 @@ int uart_register_driver(struct uart_driver *drv)
 	if (retval >= 0)
 		return retval;
 
+	for (i = 0; i < drv->nr; i++)
+		tty_port_destroy(&drv->state[i].port);
 	put_tty_driver(normal);
 out_kfree:
 	kfree(drv->state);
@@ -2312,8 +2318,12 @@ out:
 void uart_unregister_driver(struct uart_driver *drv)
 {
 	struct tty_driver *p = drv->tty_driver;
+	unsigned int i;
+
 	tty_unregister_driver(p);
 	put_tty_driver(p);
+	for (i = 0; i < drv->nr; i++)
+		tty_port_destroy(&drv->state[i].port);
 	kfree(drv->state);
 	drv->state = NULL;
 	drv->tty_driver = NULL;
@@ -2329,21 +2339,166 @@ struct tty_driver *uart_console_device(struct console *co, int *index)
 static ssize_t uart_get_attr_uartclk(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
-	int ret;
+	struct serial_struct tmp;
 	struct tty_port *port = dev_get_drvdata(dev);
-	struct uart_state *state = container_of(port, struct uart_state, port);
 
-	mutex_lock(&state->port.mutex);
-	ret = snprintf(buf, PAGE_SIZE, "%d\n", state->uart_port->uartclk);
-	mutex_unlock(&state->port.mutex);
+	uart_get_info(port, &tmp);
+	return snprintf(buf, PAGE_SIZE, "%d\n", tmp.baud_base * 16);
+}
 
-	return ret;
+static ssize_t uart_get_attr_type(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return snprintf(buf, PAGE_SIZE, "%d\n", tmp.type);
+}
+static ssize_t uart_get_attr_line(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return snprintf(buf, PAGE_SIZE, "%d\n", tmp.line);
+}
+
+static ssize_t uart_get_attr_port(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+	unsigned long ioaddr;
+
+	uart_get_info(port, &tmp);
+	ioaddr = tmp.port;
+	if (HIGH_BITS_OFFSET)
+		ioaddr |= (unsigned long)tmp.port_high << HIGH_BITS_OFFSET;
+	return snprintf(buf, PAGE_SIZE, "0x%lX\n", ioaddr);
 }
 
+static ssize_t uart_get_attr_irq(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return snprintf(buf, PAGE_SIZE, "%d\n", tmp.irq);
+}
+
+static ssize_t uart_get_attr_flags(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return snprintf(buf, PAGE_SIZE, "0x%X\n", tmp.flags);
+}
+
+static ssize_t uart_get_attr_xmit_fifo_size(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return snprintf(buf, PAGE_SIZE, "%d\n", tmp.xmit_fifo_size);
+}
+
+
+static ssize_t uart_get_attr_close_delay(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return snprintf(buf, PAGE_SIZE, "%d\n", tmp.close_delay);
+}
+
+
+static ssize_t uart_get_attr_closing_wait(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return snprintf(buf, PAGE_SIZE, "%d\n", tmp.closing_wait);
+}
+
+static ssize_t uart_get_attr_custom_divisor(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return snprintf(buf, PAGE_SIZE, "%d\n", tmp.custom_divisor);
+}
+
+static ssize_t uart_get_attr_io_type(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return snprintf(buf, PAGE_SIZE, "%d\n", tmp.io_type);
+}
+
+static ssize_t uart_get_attr_iomem_base(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return snprintf(buf, PAGE_SIZE, "0x%lX\n", (unsigned long)tmp.iomem_base);
+}
+
+static ssize_t uart_get_attr_iomem_reg_shift(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct serial_struct tmp;
+	struct tty_port *port = dev_get_drvdata(dev);
+
+	uart_get_info(port, &tmp);
+	return snprintf(buf, PAGE_SIZE, "%d\n", tmp.iomem_reg_shift);
+}
+
+static DEVICE_ATTR(type, S_IRUSR | S_IRGRP, uart_get_attr_type, NULL);
+static DEVICE_ATTR(line, S_IRUSR | S_IRGRP, uart_get_attr_line, NULL);
+static DEVICE_ATTR(port, S_IRUSR | S_IRGRP, uart_get_attr_port, NULL);
+static DEVICE_ATTR(irq, S_IRUSR | S_IRGRP, uart_get_attr_irq, NULL);
+static DEVICE_ATTR(flags, S_IRUSR | S_IRGRP, uart_get_attr_flags, NULL);
+static DEVICE_ATTR(xmit_fifo_size, S_IRUSR | S_IRGRP, uart_get_attr_xmit_fifo_size, NULL);
 static DEVICE_ATTR(uartclk, S_IRUSR | S_IRGRP, uart_get_attr_uartclk, NULL);
+static DEVICE_ATTR(close_delay, S_IRUSR | S_IRGRP, uart_get_attr_close_delay, NULL);
+static DEVICE_ATTR(closing_wait, S_IRUSR | S_IRGRP, uart_get_attr_closing_wait, NULL);
+static DEVICE_ATTR(custom_divisor, S_IRUSR | S_IRGRP, uart_get_attr_custom_divisor, NULL);
+static DEVICE_ATTR(io_type, S_IRUSR | S_IRGRP, uart_get_attr_io_type, NULL);
+static DEVICE_ATTR(iomem_base, S_IRUSR | S_IRGRP, uart_get_attr_iomem_base, NULL);
+static DEVICE_ATTR(iomem_reg_shift, S_IRUSR | S_IRGRP, uart_get_attr_iomem_reg_shift, NULL);
 
 static struct attribute *tty_dev_attrs[] = {
+	&dev_attr_type.attr,
+	&dev_attr_line.attr,
+	&dev_attr_port.attr,
+	&dev_attr_irq.attr,
+	&dev_attr_flags.attr,
+	&dev_attr_xmit_fifo_size.attr,
 	&dev_attr_uartclk.attr,
+	&dev_attr_close_delay.attr,
+	&dev_attr_closing_wait.attr,
+	&dev_attr_custom_divisor.attr,
+	&dev_attr_io_type.attr,
+	&dev_attr_iomem_base.attr,
+	&dev_attr_iomem_reg_shift.attr,
 	NULL,
 	};
 
@@ -2356,6 +2511,7 @@ static const struct attribute_group *tty_dev_attr_groups[] = {
 	NULL
 	};
 
+
 /**
  *	uart_add_one_port - attach a driver-defined port structure
  *	@drv: pointer to the uart low level driver structure for this port
diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index 6ae2a58d62f..b52b21aeb25 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -1030,7 +1030,7 @@ static DEFINE_MUTEX(serial_txx9_mutex);
  *
  *	On success the port is ready to use and the line number is returned.
  */
-static int __devinit serial_txx9_register_port(struct uart_port *port)
+static int serial_txx9_register_port(struct uart_port *port)
 {
 	int i;
 	struct uart_txx9_port *uart;
@@ -1078,7 +1078,7 @@ static int __devinit serial_txx9_register_port(struct uart_port *port)
  *	Remove one serial port.  This may not be called from interrupt
  *	context.  We hand the port back to the our control.
  */
-static void __devexit serial_txx9_unregister_port(int line)
+static void serial_txx9_unregister_port(int line)
 {
 	struct uart_txx9_port *uart = &serial_txx9_ports[line];
 
@@ -1096,7 +1096,7 @@ static void __devexit serial_txx9_unregister_port(int line)
 /*
  * Register a set of serial devices attached to a platform device.
  */
-static int __devinit serial_txx9_probe(struct platform_device *dev)
+static int serial_txx9_probe(struct platform_device *dev)
 {
 	struct uart_port *p = dev->dev.platform_data;
 	struct uart_port port;
@@ -1126,7 +1126,7 @@ static int __devinit serial_txx9_probe(struct platform_device *dev)
 /*
  * Remove serial ports registered against a platform device.
  */
-static int __devexit serial_txx9_remove(struct platform_device *dev)
+static int serial_txx9_remove(struct platform_device *dev)
 {
 	int i;
 
@@ -1171,7 +1171,7 @@ static int serial_txx9_resume(struct platform_device *dev)
 
 static struct platform_driver serial_txx9_plat_driver = {
 	.probe		= serial_txx9_probe,
-	.remove		= __devexit_p(serial_txx9_remove),
+	.remove		= serial_txx9_remove,
 #ifdef CONFIG_PM
 	.suspend	= serial_txx9_suspend,
 	.resume		= serial_txx9_resume,
@@ -1187,7 +1187,7 @@ static struct platform_driver serial_txx9_plat_driver = {
  * Probe one serial board.  Unfortunately, there is no rhyme nor reason
  * to the arrangement of serial ports on a PCI card.
  */
-static int __devinit
+static int
 pciserial_txx9_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
 {
 	struct uart_port port;
@@ -1217,7 +1217,7 @@ pciserial_txx9_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
 	return 0;
 }
 
-static void __devexit pciserial_txx9_remove_one(struct pci_dev *dev)
+static void pciserial_txx9_remove_one(struct pci_dev *dev)
 {
 	struct uart_txx9_port *up = pci_get_drvdata(dev);
 
@@ -1261,7 +1261,7 @@ static const struct pci_device_id serial_txx9_pci_tbl[] = {
 static struct pci_driver serial_txx9_pci_driver = {
 	.name		= "serial_txx9",
 	.probe		= pciserial_txx9_init_one,
-	.remove		= __devexit_p(pciserial_txx9_remove_one),
+	.remove		= pciserial_txx9_remove_one,
 #ifdef CONFIG_PM
 	.suspend	= pciserial_txx9_suspend_one,
 	.resume		= pciserial_txx9_resume_one,
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 6ee59001d61..61477567423 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -99,12 +99,6 @@ struct sci_port {
 #endif
 
 	struct notifier_block		freq_transition;
-
-#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
-	unsigned short saved_smr;
-	unsigned short saved_fcr;
-	unsigned char saved_brr;
-#endif
 };
 
 /* Function prototypes */
@@ -202,9 +196,9 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCxSR]		= { 0x14, 16 },
 		[SCxRDR]	= { 0x60,  8 },
 		[SCFCR]		= { 0x18, 16 },
-		[SCFDR]		= { 0x1c, 16 },
-		[SCTFDR]	= sci_reg_invalid,
-		[SCRFDR]	= sci_reg_invalid,
+		[SCFDR]		= sci_reg_invalid,
+		[SCTFDR]	= { 0x38, 16 },
+		[SCRFDR]	= { 0x3c, 16 },
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
 	},
@@ -491,7 +485,7 @@ static int sci_txfill(struct uart_port *port)
 
 	reg = sci_getreg(port, SCTFDR);
 	if (reg->size)
-		return serial_port_in(port, SCTFDR) & 0xff;
+		return serial_port_in(port, SCTFDR) & ((port->fifosize << 1) - 1);
 
 	reg = sci_getreg(port, SCFDR);
 	if (reg->size)
@@ -511,7 +505,7 @@ static int sci_rxfill(struct uart_port *port)
 
 	reg = sci_getreg(port, SCRFDR);
 	if (reg->size)
-		return serial_port_in(port, SCRFDR) & 0xff;
+		return serial_port_in(port, SCRFDR) & ((port->fifosize << 1) - 1);
 
 	reg = sci_getreg(port, SCFDR);
 	if (reg->size)
@@ -1132,7 +1126,7 @@ static const char *sci_gpio_str(unsigned int index)
 	return sci_gpio_names[index];
 }
 
-static void __devinit sci_init_gpios(struct sci_port *port)
+static void sci_init_gpios(struct sci_port *port)
 {
 	struct uart_port *up = &port->port;
 	int i;
@@ -1749,22 +1743,21 @@ static inline void sci_free_dma(struct uart_port *port)
 static int sci_startup(struct uart_port *port)
 {
 	struct sci_port *s = to_sci_port(port);
+	unsigned long flags;
 	int ret;
 
 	dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
 
-	pm_runtime_put_noidle(port->dev);
-
-	sci_port_enable(s);
-
 	ret = sci_request_irq(s);
 	if (unlikely(ret < 0))
 		return ret;
 
 	sci_request_dma(port);
 
+	spin_lock_irqsave(&port->lock, flags);
 	sci_start_tx(port);
 	sci_start_rx(port);
+	spin_unlock_irqrestore(&port->lock, flags);
 
 	return 0;
 }
@@ -1772,18 +1765,17 @@ static int sci_startup(struct uart_port *port)
 static void sci_shutdown(struct uart_port *port)
 {
 	struct sci_port *s = to_sci_port(port);
+	unsigned long flags;
 
 	dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
 
+	spin_lock_irqsave(&port->lock, flags);
 	sci_stop_rx(port);
 	sci_stop_tx(port);
+	spin_unlock_irqrestore(&port->lock, flags);
 
 	sci_free_dma(port);
 	sci_free_irq(s);
-
-	sci_port_disable(s);
-
-	pm_runtime_get_noresume(port->dev);
 }
 
 static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps,
@@ -1829,7 +1821,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 {
 	struct sci_port *s = to_sci_port(port);
 	struct plat_sci_reg *reg;
-	unsigned int baud, smr_val, max_baud;
+	unsigned int baud, smr_val, max_baud, cks;
 	int t = -1;
 
 	/*
@@ -1863,21 +1855,18 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	uart_update_timeout(port, termios->c_cflag, baud);
 
-	serial_port_out(port, SCSMR, smr_val);
-
-	dev_dbg(port->dev, "%s: SMR %x, t %x, SCSCR %x\n", __func__, smr_val, t,
-		s->cfg->scscr);
+	for (cks = 0; t >= 256 && cks <= 3; cks++)
+		t >>= 2;
 
-	if (t > 0) {
-		if (t >= 256) {
-			serial_port_out(port, SCSMR, (serial_port_in(port, SCSMR) & ~3) | 1);
-			t >>= 2;
-		} else
-			serial_port_out(port, SCSMR, serial_port_in(port, SCSMR) & ~3);
+	dev_dbg(port->dev, "%s: SMR %x, cks %x, t %x, SCSCR %x\n",
+		__func__, smr_val, cks, t, s->cfg->scscr);
 
+	if (t >= 0) {
+		serial_port_out(port, SCSMR, (smr_val & ~3) | cks);
 		serial_port_out(port, SCBRR, t);
 		udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
-	}
+	} else
+		serial_port_out(port, SCSMR, smr_val);
 
 	sci_init_pins(port, termios->c_cflag);
 
@@ -1932,6 +1921,21 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	sci_port_disable(s);
 }
 
+static void sci_pm(struct uart_port *port, unsigned int state,
+		   unsigned int oldstate)
+{
+	struct sci_port *sci_port = to_sci_port(port);
+
+	switch (state) {
+	case 3:
+		sci_port_disable(sci_port);
+		break;
+	default:
+		sci_port_enable(sci_port);
+		break;
+	}
+}
+
 static const char *sci_type(struct uart_port *port)
 {
 	switch (port->type) {
@@ -2053,6 +2057,7 @@ static struct uart_ops sci_uart_ops = {
 	.startup	= sci_startup,
 	.shutdown	= sci_shutdown,
 	.set_termios	= sci_set_termios,
+	.pm		= sci_pm,
 	.type		= sci_type,
 	.release_port	= sci_release_port,
 	.request_port	= sci_request_port,
@@ -2064,7 +2069,7 @@ static struct uart_ops sci_uart_ops = {
 #endif
 };
 
-static int __devinit sci_init_single(struct platform_device *dev,
+static int sci_init_single(struct platform_device *dev,
 				     struct sci_port *sci_port,
 				     unsigned int index,
 				     struct plat_sci_port *p)
@@ -2121,8 +2126,6 @@ static int __devinit sci_init_single(struct platform_device *dev,
 
 		sci_init_gpios(sci_port);
 
-		pm_runtime_irq_safe(&dev->dev);
-		pm_runtime_get_noresume(&dev->dev);
 		pm_runtime_enable(&dev->dev);
 	}
 
@@ -2206,9 +2209,21 @@ static void serial_console_write(struct console *co, const char *s,
 {
 	struct sci_port *sci_port = &sci_ports[co->index];
 	struct uart_port *port = &sci_port->port;
-	unsigned short bits;
+	unsigned short bits, ctrl;
+	unsigned long flags;
+	int locked = 1;
+
+	local_irq_save(flags);
+	if (port->sysrq)
+		locked = 0;
+	else if (oops_in_progress)
+		locked = spin_trylock(&port->lock);
+	else
+		spin_lock(&port->lock);
 
-	sci_port_enable(sci_port);
+	/* first save the SCSCR then disable the interrupts */
+	ctrl = serial_port_in(port, SCSCR);
+	serial_port_out(port, SCSCR, sci_port->cfg->scscr);
 
 	uart_console_write(port, s, count, serial_console_putchar);
 
@@ -2217,10 +2232,15 @@ static void serial_console_write(struct console *co, const char *s,
 	while ((serial_port_in(port, SCxSR) & bits) != bits)
 		cpu_relax();
 
-	sci_port_disable(sci_port);
+	/* restore the SCSCR */
+	serial_port_out(port, SCSCR, ctrl);
+
+	if (locked)
+		spin_unlock(&port->lock);
+	local_irq_restore(flags);
 }
 
-static int __devinit serial_console_setup(struct console *co, char *options)
+static int serial_console_setup(struct console *co, char *options)
 {
 	struct sci_port *sci_port;
 	struct uart_port *port;
@@ -2249,13 +2269,9 @@ static int __devinit serial_console_setup(struct console *co, char *options)
 	if (unlikely(ret != 0))
 		return ret;
 
-	sci_port_enable(sci_port);
-
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
 
-	sci_port_disable(sci_port);
-
 	return uart_set_options(port, co, baud, parity, bits, flow);
 }
 
@@ -2278,7 +2294,7 @@ static struct console early_serial_console = {
 
 static char early_serial_buf[32];
 
-static int __devinit sci_probe_earlyprintk(struct platform_device *pdev)
+static int sci_probe_earlyprintk(struct platform_device *pdev)
 {
 	struct plat_sci_port *cfg = pdev->dev.platform_data;
 
@@ -2298,57 +2314,15 @@ static int __devinit sci_probe_earlyprintk(struct platform_device *pdev)
 	return 0;
 }
 
-#define uart_console(port)	((port)->cons->index == (port)->line)
-
-static int sci_runtime_suspend(struct device *dev)
-{
-	struct sci_port *sci_port = dev_get_drvdata(dev);
-	struct uart_port *port = &sci_port->port;
-
-	if (uart_console(port)) {
-		struct plat_sci_reg *reg;
-
-		sci_port->saved_smr = serial_port_in(port, SCSMR);
-		sci_port->saved_brr = serial_port_in(port, SCBRR);
-
-		reg = sci_getreg(port, SCFCR);
-		if (reg->size)
-			sci_port->saved_fcr = serial_port_in(port, SCFCR);
-		else
-			sci_port->saved_fcr = 0;
-	}
-	return 0;
-}
-
-static int sci_runtime_resume(struct device *dev)
-{
-	struct sci_port *sci_port = dev_get_drvdata(dev);
-	struct uart_port *port = &sci_port->port;
-
-	if (uart_console(port)) {
-		sci_reset(port);
-		serial_port_out(port, SCSMR, sci_port->saved_smr);
-		serial_port_out(port, SCBRR, sci_port->saved_brr);
-
-		if (sci_port->saved_fcr)
-			serial_port_out(port, SCFCR, sci_port->saved_fcr);
-
-		serial_port_out(port, SCSCR, sci_port->cfg->scscr);
-	}
-	return 0;
-}
-
 #define SCI_CONSOLE	(&serial_console)
 
 #else
-static inline int __devinit sci_probe_earlyprintk(struct platform_device *pdev)
+static inline int sci_probe_earlyprintk(struct platform_device *pdev)
 {
 	return -EINVAL;
 }
 
 #define SCI_CONSOLE	NULL
-#define sci_runtime_suspend	NULL
-#define sci_runtime_resume	NULL
 
 #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
 
@@ -2379,7 +2353,7 @@ static int sci_remove(struct platform_device *dev)
 	return 0;
 }
 
-static int __devinit sci_probe_single(struct platform_device *dev,
+static int sci_probe_single(struct platform_device *dev,
 				      unsigned int index,
 				      struct plat_sci_port *p,
 				      struct sci_port *sciport)
@@ -2409,7 +2383,7 @@ static int __devinit sci_probe_single(struct platform_device *dev,
 	return 0;
 }
 
-static int __devinit sci_probe(struct platform_device *dev)
+static int sci_probe(struct platform_device *dev)
 {
 	struct plat_sci_port *p = dev->dev.platform_data;
 	struct sci_port *sp = &sci_ports[dev->id];
@@ -2466,8 +2440,6 @@ static int sci_resume(struct device *dev)
 }
 
 static const struct dev_pm_ops sci_dev_pm_ops = {
-	.runtime_suspend = sci_runtime_suspend,
-	.runtime_resume = sci_runtime_resume,
 	.suspend	= sci_suspend,
 	.resume		= sci_resume,
 };
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index a9e2bd1ab53..5da5cb96276 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -727,7 +727,7 @@ static int sirfsoc_uart_resume(struct platform_device *pdev)
 	return 0;
 }
 
-static struct of_device_id sirfsoc_uart_ids[] __devinitdata = {
+static struct of_device_id sirfsoc_uart_ids[] = {
 	{ .compatible = "sirf,prima2-uart", },
 	{}
 };
@@ -735,7 +735,7 @@ MODULE_DEVICE_TABLE(of, sirfsoc_serial_of_match);
 
 static struct platform_driver sirfsoc_uart_driver = {
 	.probe		= sirfsoc_uart_probe,
-	.remove		= __devexit_p(sirfsoc_uart_remove),
+	.remove		= sirfsoc_uart_remove,
 	.suspend	= sirfsoc_uart_suspend,
 	.resume		= sirfsoc_uart_resume,
 	.driver		= {
diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c
index 505961cfd93..b9bf9c53f7f 100644
--- a/drivers/tty/serial/sunhv.c
+++ b/drivers/tty/serial/sunhv.c
@@ -519,7 +519,7 @@ static struct console sunhv_console = {
 	.data	=	&sunhv_reg,
 };
 
-static int __devinit hv_probe(struct platform_device *op)
+static int hv_probe(struct platform_device *op)
 {
 	struct uart_port *port;
 	unsigned long minor;
@@ -598,7 +598,7 @@ out_free_port:
 	return err;
 }
 
-static int __devexit hv_remove(struct platform_device *dev)
+static int hv_remove(struct platform_device *dev)
 {
 	struct uart_port *port = dev_get_drvdata(&dev->dev);
 
@@ -636,7 +636,7 @@ static struct platform_driver hv_driver = {
 		.of_match_table = hv_match,
 	},
 	.probe		= hv_probe,
-	.remove		= __devexit_p(hv_remove),
+	.remove		= hv_remove,
 };
 
 static int __init sunhv_init(void)
diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
index f0d93eb7e6e..bd8b3b63410 100644
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -954,7 +954,7 @@ static inline struct console *SUNSAB_CONSOLE(void)
 #define sunsab_console_init()	do { } while (0)
 #endif
 
-static int __devinit sunsab_init_one(struct uart_sunsab_port *up,
+static int sunsab_init_one(struct uart_sunsab_port *up,
 				     struct platform_device *op,
 				     unsigned long offset,
 				     int line)
@@ -1007,7 +1007,7 @@ static int __devinit sunsab_init_one(struct uart_sunsab_port *up,
 	return 0;
 }
 
-static int __devinit sab_probe(struct platform_device *op)
+static int sab_probe(struct platform_device *op)
 {
 	static int inst;
 	struct uart_sunsab_port *up;
@@ -1063,7 +1063,7 @@ out:
 	return err;
 }
 
-static int __devexit sab_remove(struct platform_device *op)
+static int sab_remove(struct platform_device *op)
 {
 	struct uart_sunsab_port *up = dev_get_drvdata(&op->dev);
 
@@ -1100,7 +1100,7 @@ static struct platform_driver sab_driver = {
 		.of_match_table = sab_match,
 	},
 	.probe		= sab_probe,
-	.remove		= __devexit_p(sab_remove),
+	.remove		= sab_remove,
 };
 
 static int __init sunsab_init(void)
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index b97913dcdbf..220da3f9724 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -1185,7 +1185,7 @@ static struct uart_driver sunsu_reg = {
 	.major			= TTY_MAJOR,
 };
 
-static int __devinit sunsu_kbd_ms_init(struct uart_sunsu_port *up)
+static int sunsu_kbd_ms_init(struct uart_sunsu_port *up)
 {
 	int quot, baud;
 #ifdef CONFIG_SERIO
@@ -1391,7 +1391,7 @@ static inline struct console *SUNSU_CONSOLE(void)
 #define sunsu_serial_console_init()	do { } while (0)
 #endif
 
-static enum su_type __devinit su_get_type(struct device_node *dp)
+static enum su_type su_get_type(struct device_node *dp)
 {
 	struct device_node *ap = of_find_node_by_path("/aliases");
 
@@ -1412,7 +1412,7 @@ static enum su_type __devinit su_get_type(struct device_node *dp)
 	return SU_PORT_PORT;
 }
 
-static int __devinit su_probe(struct platform_device *op)
+static int su_probe(struct platform_device *op)
 {
 	static int inst;
 	struct device_node *dp = op->dev.of_node;
@@ -1503,7 +1503,7 @@ out_unmap:
 	return err;
 }
 
-static int __devexit su_remove(struct platform_device *op)
+static int su_remove(struct platform_device *op)
 {
 	struct uart_sunsu_port *up = dev_get_drvdata(&op->dev);
 	bool kbdms = false;
@@ -1556,7 +1556,7 @@ static struct platform_driver su_driver = {
 		.of_match_table = su_match,
 	},
 	.probe		= su_probe,
-	.remove		= __devexit_p(su_remove),
+	.remove		= su_remove,
 };
 
 static int __init sunsu_init(void)
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index babd9470982..aef4fab957c 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -1282,7 +1282,7 @@ static inline struct console *SUNZILOG_CONSOLE(void)
 #define SUNZILOG_CONSOLE()	(NULL)
 #endif
 
-static void __devinit sunzilog_init_kbdms(struct uart_sunzilog_port *up)
+static void sunzilog_init_kbdms(struct uart_sunzilog_port *up)
 {
 	int baud, brg;
 
@@ -1302,7 +1302,7 @@ static void __devinit sunzilog_init_kbdms(struct uart_sunzilog_port *up)
 }
 
 #ifdef CONFIG_SERIO
-static void __devinit sunzilog_register_serio(struct uart_sunzilog_port *up)
+static void sunzilog_register_serio(struct uart_sunzilog_port *up)
 {
 	struct serio *serio = &up->serio;
 
@@ -1331,7 +1331,7 @@ static void __devinit sunzilog_register_serio(struct uart_sunzilog_port *up)
 }
 #endif
 
-static void __devinit sunzilog_init_hw(struct uart_sunzilog_port *up)
+static void sunzilog_init_hw(struct uart_sunzilog_port *up)
 {
 	struct zilog_channel __iomem *channel;
 	unsigned long flags;
@@ -1400,7 +1400,7 @@ static void __devinit sunzilog_init_hw(struct uart_sunzilog_port *up)
 
 static int zilog_irq;
 
-static int __devinit zs_probe(struct platform_device *op)
+static int zs_probe(struct platform_device *op)
 {
 	static int kbm_inst, uart_inst;
 	int inst;
@@ -1507,7 +1507,7 @@ static int __devinit zs_probe(struct platform_device *op)
 	return 0;
 }
 
-static void __devexit zs_remove_one(struct uart_sunzilog_port *up)
+static void zs_remove_one(struct uart_sunzilog_port *up)
 {
 	if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up)) {
 #ifdef CONFIG_SERIO
@@ -1517,7 +1517,7 @@ static void __devexit zs_remove_one(struct uart_sunzilog_port *up)
 		uart_remove_one_port(&sunzilog_reg, &up->port);
 }
 
-static int __devexit zs_remove(struct platform_device *op)
+static int zs_remove(struct platform_device *op)
 {
 	struct uart_sunzilog_port *up = dev_get_drvdata(&op->dev);
 	struct zilog_layout __iomem *regs;
@@ -1548,7 +1548,7 @@ static struct platform_driver zs_driver = {
 		.of_match_table = zs_match,
 	},
 	.probe		= zs_probe,
-	.remove		= __devexit_p(zs_remove),
+	.remove		= zs_remove,
 };
 
 static int __init sunzilog_init(void)
diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c
index 70f97491d8f..5be0d68fece 100644
--- a/drivers/tty/serial/timbuart.c
+++ b/drivers/tty/serial/timbuart.c
@@ -426,7 +426,7 @@ static struct uart_driver timbuart_driver = {
 	.nr = 1
 };
 
-static int __devinit timbuart_probe(struct platform_device *dev)
+static int timbuart_probe(struct platform_device *dev)
 {
 	int err, irq;
 	struct timbuart_port *uart;
@@ -492,7 +492,7 @@ err_mem:
 	return err;
 }
 
-static int __devexit timbuart_remove(struct platform_device *dev)
+static int timbuart_remove(struct platform_device *dev)
 {
 	struct timbuart_port *uart = platform_get_drvdata(dev);
 
@@ -510,7 +510,7 @@ static struct platform_driver timbuart_platform_driver = {
 		.owner	= THIS_MODULE,
 	},
 	.probe		= timbuart_probe,
-	.remove		= __devexit_p(timbuart_remove),
+	.remove		= timbuart_remove,
 };
 
 module_platform_driver(timbuart_platform_driver);
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 6579ffdd8e9..89eee43c4e2 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -408,7 +408,7 @@ static void ulite_console_write(struct console *co, const char *s,
 		spin_unlock_irqrestore(&port->lock, flags);
 }
 
-static int __devinit ulite_console_setup(struct console *co, char *options)
+static int ulite_console_setup(struct console *co, char *options)
 {
 	struct uart_port *port;
 	int baud = 9600;
@@ -486,7 +486,7 @@ static struct uart_driver ulite_uart_driver = {
  *
  * Returns: 0 on success, <0 otherwise
  */
-static int __devinit ulite_assign(struct device *dev, int id, u32 base, int irq)
+static int ulite_assign(struct device *dev, int id, u32 base, int irq)
 {
 	struct uart_port *port;
 	int rc;
@@ -542,7 +542,7 @@ static int __devinit ulite_assign(struct device *dev, int id, u32 base, int irq)
  *
  * @dev: pointer to device structure
  */
-static int __devexit ulite_release(struct device *dev)
+static int ulite_release(struct device *dev)
 {
 	struct uart_port *port = dev_get_drvdata(dev);
 	int rc = 0;
@@ -562,7 +562,7 @@ static int __devexit ulite_release(struct device *dev)
 
 #if defined(CONFIG_OF)
 /* Match table for of_platform binding */
-static struct of_device_id ulite_of_match[] __devinitdata = {
+static struct of_device_id ulite_of_match[] = {
 	{ .compatible = "xlnx,opb-uartlite-1.00.b", },
 	{ .compatible = "xlnx,xps-uartlite-1.00.a", },
 	{}
@@ -570,7 +570,7 @@ static struct of_device_id ulite_of_match[] __devinitdata = {
 MODULE_DEVICE_TABLE(of, ulite_of_match);
 #endif /* CONFIG_OF */
 
-static int __devinit ulite_probe(struct platform_device *pdev)
+static int ulite_probe(struct platform_device *pdev)
 {
 	struct resource *res, *res2;
 	int id = pdev->id;
@@ -593,7 +593,7 @@ static int __devinit ulite_probe(struct platform_device *pdev)
 	return ulite_assign(&pdev->dev, id, res->start, res2->start);
 }
 
-static int __devexit ulite_remove(struct platform_device *pdev)
+static int ulite_remove(struct platform_device *pdev)
 {
 	return ulite_release(&pdev->dev);
 }
@@ -603,7 +603,7 @@ MODULE_ALIAS("platform:uartlite");
 
 static struct platform_driver ulite_platform_driver = {
 	.probe = ulite_probe,
-	.remove = __devexit_p(ulite_remove),
+	.remove = ulite_remove,
 	.driver = {
 		.owner = THIS_MODULE,
 		.name  = "uartlite",
diff --git a/drivers/tty/serial/vr41xx_siu.c b/drivers/tty/serial/vr41xx_siu.c
index cf0d9485ec0..62ee0166bc6 100644
--- a/drivers/tty/serial/vr41xx_siu.c
+++ b/drivers/tty/serial/vr41xx_siu.c
@@ -823,7 +823,7 @@ static struct console siu_console = {
 	.data	= &siu_uart_driver,
 };
 
-static int __devinit siu_console_init(void)
+static int siu_console_init(void)
 {
 	struct uart_port *port;
 	int i;
@@ -867,7 +867,7 @@ static struct uart_driver siu_uart_driver = {
 	.cons		= SERIAL_VR41XX_CONSOLE,
 };
 
-static int __devinit siu_probe(struct platform_device *dev)
+static int siu_probe(struct platform_device *dev)
 {
 	struct uart_port *port;
 	int num, i, retval;
@@ -901,7 +901,7 @@ static int __devinit siu_probe(struct platform_device *dev)
 	return 0;
 }
 
-static int __devexit siu_remove(struct platform_device *dev)
+static int siu_remove(struct platform_device *dev)
 {
 	struct uart_port *port;
 	int i;
@@ -952,7 +952,7 @@ static int siu_resume(struct platform_device *dev)
 
 static struct platform_driver siu_device_driver = {
 	.probe		= siu_probe,
-	.remove		= __devexit_p(siu_remove),
+	.remove		= siu_remove,
 	.suspend	= siu_suspend,
 	.resume		= siu_resume,
 	.driver		= {
diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 205d4cf4a06..8fd181436a6 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -554,7 +554,7 @@ static struct uart_driver vt8500_uart_driver = {
 	.cons		= VT8500_CONSOLE,
 };
 
-static int __devinit vt8500_serial_probe(struct platform_device *pdev)
+static int vt8500_serial_probe(struct platform_device *pdev)
 {
 	struct vt8500_port *vt8500_port;
 	struct resource *mmres, *irqres;
@@ -567,10 +567,6 @@ static int __devinit vt8500_serial_probe(struct platform_device *pdev)
 	if (!mmres || !irqres)
 		return -ENODEV;
 
-	vt8500_port = kzalloc(sizeof(struct vt8500_port), GFP_KERNEL);
-	if (!vt8500_port)
-		return -ENOMEM;
-
 	if (np)
 		port = of_alias_get_id(np, "serial");
 		if (port > VT8500_MAX_PORTS)
@@ -593,6 +589,10 @@ static int __devinit vt8500_serial_probe(struct platform_device *pdev)
 		return -EBUSY;
 	}
 
+	vt8500_port = kzalloc(sizeof(struct vt8500_port), GFP_KERNEL);
+	if (!vt8500_port)
+		return -ENOMEM;
+
 	vt8500_port->uart.type = PORT_VT8500;
 	vt8500_port->uart.iotype = UPIO_MEM;
 	vt8500_port->uart.mapbase = mmres->start;
@@ -634,7 +634,7 @@ err:
 	return ret;
 }
 
-static int __devexit vt8500_serial_remove(struct platform_device *pdev)
+static int vt8500_serial_remove(struct platform_device *pdev)
 {
 	struct vt8500_port *vt8500_port = platform_get_drvdata(pdev);
 
@@ -652,7 +652,7 @@ static const struct of_device_id wmt_dt_ids[] = {
 
 static struct platform_driver vt8500_platform_driver = {
 	.probe  = vt8500_serial_probe,
-	.remove = __devexit_p(vt8500_serial_remove),
+	.remove = vt8500_serial_remove,
 	.driver = {
 		.name = "vt8500_serial",
 		.owner = THIS_MODULE,
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index b627363352e..9ab910370c5 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -939,22 +939,18 @@ static struct uart_driver xuartps_uart_driver = {
  *
  * Returns 0 on success, negative error otherwise
  **/
-static int __devinit xuartps_probe(struct platform_device *pdev)
+static int xuartps_probe(struct platform_device *pdev)
 {
 	int rc;
 	struct uart_port *port;
 	struct resource *res, *res2;
 	int clk = 0;
 
-#ifdef CONFIG_OF
 	const unsigned int *prop;
 
 	prop = of_get_property(pdev->dev.of_node, "clock", NULL);
 	if (prop)
 		clk = be32_to_cpup(prop);
-#else
-	clk = *((unsigned int *)(pdev->dev.platform_data));
-#endif
 	if (!clk) {
 		dev_err(&pdev->dev, "no clock specified\n");
 		return -ENODEV;
@@ -1001,7 +997,7 @@ static int __devinit xuartps_probe(struct platform_device *pdev)
  *
  * Returns 0 on success, negative error otherwise
  **/
-static int __devexit xuartps_remove(struct platform_device *pdev)
+static int xuartps_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = dev_get_drvdata(&pdev->dev);
 	int rc = 0;
@@ -1044,16 +1040,11 @@ static int xuartps_resume(struct platform_device *pdev)
 }
 
 /* Match table for of_platform binding */
-
-#ifdef CONFIG_OF
-static struct of_device_id xuartps_of_match[] __devinitdata = {
+static struct of_device_id xuartps_of_match[] = {
 	{ .compatible = "xlnx,xuartps", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, xuartps_of_match);
-#else
-#define xuartps_of_match NULL
-#endif
 
 static struct platform_driver xuartps_platform_driver = {
 	.probe   = xuartps_probe,		/* Probe method */
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 70e3a525bc8..9e071f6985f 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -898,7 +898,7 @@ static struct pci_driver synclink_pci_driver = {
 	.name		= "synclink",
 	.id_table	= synclink_pci_tbl,
 	.probe		= synclink_init_one,
-	.remove		= __devexit_p(synclink_remove_one),
+	.remove		= synclink_remove_one,
 };
 
 static struct tty_driver *serial_driver;
@@ -4425,6 +4425,7 @@ static void synclink_cleanup(void)
 		mgsl_release_resources(info);
 		tmp = info;
 		info = info->next_device;
+		tty_port_destroy(&tmp->port);
 		kfree(tmp);
 	}
 	
@@ -8064,7 +8065,7 @@ static void hdlcdev_exit(struct mgsl_struct *info)
 #endif /* CONFIG_HDLC */
 
 
-static int __devinit synclink_init_one (struct pci_dev *dev,
+static int synclink_init_one (struct pci_dev *dev,
 					const struct pci_device_id *ent)
 {
 	struct mgsl_struct *info;
@@ -8116,7 +8117,7 @@ static int __devinit synclink_init_one (struct pci_dev *dev,
 	return 0;
 }
 
-static void __devexit synclink_remove_one (struct pci_dev *dev)
+static void synclink_remove_one (struct pci_dev *dev)
 {
 }
 
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index b38e954eedd..aba1e59f4a8 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -110,7 +110,7 @@ static struct pci_driver pci_driver = {
 	.name		= "synclink_gt",
 	.id_table	= pci_table,
 	.probe		= init_one,
-	.remove		= __devexit_p(remove_one),
+	.remove		= remove_one,
 };
 
 static bool pci_registered;
@@ -3645,8 +3645,10 @@ static void device_init(int adapter_num, struct pci_dev *pdev)
 	for (i=0; i < port_count; ++i) {
 		port_array[i] = alloc_dev(adapter_num, i, pdev);
 		if (port_array[i] == NULL) {
-			for (--i; i >= 0; --i)
+			for (--i; i >= 0; --i) {
+				tty_port_destroy(&port_array[i]->port);
 				kfree(port_array[i]);
+			}
 			return;
 		}
 	}
@@ -3696,7 +3698,7 @@ static void device_init(int adapter_num, struct pci_dev *pdev)
 	}
 }
 
-static int __devinit init_one(struct pci_dev *dev,
+static int init_one(struct pci_dev *dev,
 			      const struct pci_device_id *ent)
 {
 	if (pci_enable_device(dev)) {
@@ -3708,7 +3710,7 @@ static int __devinit init_one(struct pci_dev *dev,
 	return 0;
 }
 
-static void __devexit remove_one(struct pci_dev *dev)
+static void remove_one(struct pci_dev *dev)
 {
 }
 
@@ -3773,6 +3775,7 @@ static void slgt_cleanup(void)
 			release_resources(info);
 		tmp = info;
 		info = info->next_device;
+		tty_port_destroy(&tmp->port);
 		kfree(tmp);
 	}
 
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index f17d9f3d84a..fd43fb6f7ce 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -492,7 +492,7 @@ static struct pci_driver synclinkmp_pci_driver = {
 	.name		= "synclinkmp",
 	.id_table	= synclinkmp_pci_tbl,
 	.probe		= synclinkmp_init_one,
-	.remove		= __devexit_p(synclinkmp_remove_one),
+	.remove		= synclinkmp_remove_one,
 };
 
 
@@ -3843,8 +3843,10 @@ static void device_init(int adapter_num, struct pci_dev *pdev)
 	for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
 		port_array[port] = alloc_dev(adapter_num,port,pdev);
 		if( port_array[port] == NULL ) {
-			for ( --port; port >= 0; --port )
+			for (--port; port >= 0; --port) {
+				tty_port_destroy(&port_array[port]->port);
 				kfree(port_array[port]);
+			}
 			return;
 		}
 	}
@@ -3953,6 +3955,7 @@ static void synclinkmp_cleanup(void)
 		}
 		tmp = info;
 		info = info->next_device;
+		tty_port_destroy(&tmp->port);
 		kfree(tmp);
 	}
 
@@ -5592,7 +5595,7 @@ static void write_control_reg(SLMP_INFO * info)
 }
 
 
-static int __devinit synclinkmp_init_one (struct pci_dev *dev,
+static int synclinkmp_init_one (struct pci_dev *dev,
 					  const struct pci_device_id *ent)
 {
 	if (pci_enable_device(dev)) {
@@ -5603,6 +5606,6 @@ static int __devinit synclinkmp_init_one (struct pci_dev *dev,
 	return 0;
 }
 
-static void __devexit synclinkmp_remove_one (struct pci_dev *dev)
+static void synclinkmp_remove_one (struct pci_dev *dev)
 {
 }
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index 16ee6cee07d..b3c4a250ff8 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -346,7 +346,8 @@ static struct sysrq_key_op sysrq_term_op = {
 
 static void moom_callback(struct work_struct *ignored)
 {
-	out_of_memory(node_zonelist(0, GFP_KERNEL), GFP_KERNEL, 0, NULL, true);
+	out_of_memory(node_zonelist(first_online_node, GFP_KERNEL), GFP_KERNEL,
+		      0, NULL, true);
 }
 
 static DECLARE_WORK(moom_work, moom_callback);
diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c
index b0b39b823cc..6953dc82850 100644
--- a/drivers/tty/tty_audit.c
+++ b/drivers/tty/tty_audit.c
@@ -23,7 +23,7 @@ struct tty_audit_buf {
 };
 
 static struct tty_audit_buf *tty_audit_buf_alloc(int major, int minor,
-						 int icanon)
+						 unsigned icanon)
 {
 	struct tty_audit_buf *buf;
 
@@ -239,7 +239,8 @@ int tty_audit_push_task(struct task_struct *tsk, kuid_t loginuid, u32 sessionid)
  *	if TTY auditing is disabled or out of memory.  Otherwise, return a new
  *	reference to the buffer.
  */
-static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty)
+static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty,
+		unsigned icanon)
 {
 	struct tty_audit_buf *buf, *buf2;
 
@@ -257,7 +258,7 @@ static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty)
 
 	buf2 = tty_audit_buf_alloc(tty->driver->major,
 				   tty->driver->minor_start + tty->index,
-				   tty->icanon);
+				   icanon);
 	if (buf2 == NULL) {
 		audit_log_lost("out of memory in TTY auditing");
 		return NULL;
@@ -287,7 +288,7 @@ static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty)
  *	Audit @data of @size from @tty, if necessary.
  */
 void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
-			size_t size)
+			size_t size, unsigned icanon)
 {
 	struct tty_audit_buf *buf;
 	int major, minor;
@@ -299,7 +300,7 @@ void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
 	    && tty->driver->subtype == PTY_TYPE_MASTER)
 		return;
 
-	buf = tty_audit_buf_get(tty);
+	buf = tty_audit_buf_get(tty, icanon);
 	if (!buf)
 		return;
 
@@ -307,11 +308,11 @@ void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
 	major = tty->driver->major;
 	minor = tty->driver->minor_start + tty->index;
 	if (buf->major != major || buf->minor != minor
-	    || buf->icanon != tty->icanon) {
+	    || buf->icanon != icanon) {
 		tty_audit_buf_push_current(buf);
 		buf->major = major;
 		buf->minor = minor;
-		buf->icanon = tty->icanon;
+		buf->icanon = icanon;
 	}
 	do {
 		size_t run;
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 91e326ffe7d..45d916198f7 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -27,19 +27,21 @@
  *	Locking: none
  */
 
-void tty_buffer_free_all(struct tty_struct *tty)
+void tty_buffer_free_all(struct tty_port *port)
 {
+	struct tty_bufhead *buf = &port->buf;
 	struct tty_buffer *thead;
-	while ((thead = tty->buf.head) != NULL) {
-		tty->buf.head = thead->next;
+
+	while ((thead = buf->head) != NULL) {
+		buf->head = thead->next;
 		kfree(thead);
 	}
-	while ((thead = tty->buf.free) != NULL) {
-		tty->buf.free = thead->next;
+	while ((thead = buf->free) != NULL) {
+		buf->free = thead->next;
 		kfree(thead);
 	}
-	tty->buf.tail = NULL;
-	tty->buf.memory_used = 0;
+	buf->tail = NULL;
+	buf->memory_used = 0;
 }
 
 /**
@@ -54,11 +56,11 @@ void tty_buffer_free_all(struct tty_struct *tty)
  *	Locking: Caller must hold tty->buf.lock
  */
 
-static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size)
+static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size)
 {
 	struct tty_buffer *p;
 
-	if (tty->buf.memory_used + size > 65536)
+	if (port->buf.memory_used + size > 65536)
 		return NULL;
 	p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
 	if (p == NULL)
@@ -70,7 +72,7 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size)
 	p->read = 0;
 	p->char_buf_ptr = (char *)(p->data);
 	p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size;
-	tty->buf.memory_used += size;
+	port->buf.memory_used += size;
 	return p;
 }
 
@@ -85,17 +87,19 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size)
  *	Locking: Caller must hold tty->buf.lock
  */
 
-static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b)
+static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
 {
+	struct tty_bufhead *buf = &port->buf;
+
 	/* Dumb strategy for now - should keep some stats */
-	tty->buf.memory_used -= b->size;
-	WARN_ON(tty->buf.memory_used < 0);
+	buf->memory_used -= b->size;
+	WARN_ON(buf->memory_used < 0);
 
 	if (b->size >= 512)
 		kfree(b);
 	else {
-		b->next = tty->buf.free;
-		tty->buf.free = b;
+		b->next = buf->free;
+		buf->free = b;
 	}
 }
 
@@ -110,15 +114,16 @@ static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b)
  *	Locking: Caller must hold tty->buf.lock
  */
 
-static void __tty_buffer_flush(struct tty_struct *tty)
+static void __tty_buffer_flush(struct tty_port *port)
 {
+	struct tty_bufhead *buf = &port->buf;
 	struct tty_buffer *thead;
 
-	while ((thead = tty->buf.head) != NULL) {
-		tty->buf.head = thead->next;
-		tty_buffer_free(tty, thead);
+	while ((thead = buf->head) != NULL) {
+		buf->head = thead->next;
+		tty_buffer_free(port, thead);
 	}
-	tty->buf.tail = NULL;
+	buf->tail = NULL;
 }
 
 /**
@@ -134,21 +139,24 @@ static void __tty_buffer_flush(struct tty_struct *tty)
 
 void tty_buffer_flush(struct tty_struct *tty)
 {
+	struct tty_port *port = tty->port;
+	struct tty_bufhead *buf = &port->buf;
 	unsigned long flags;
-	spin_lock_irqsave(&tty->buf.lock, flags);
+
+	spin_lock_irqsave(&buf->lock, flags);
 
 	/* If the data is being pushed to the tty layer then we can't
 	   process it here. Instead set a flag and the flush_to_ldisc
 	   path will process the flush request before it exits */
-	if (test_bit(TTY_FLUSHING, &tty->flags)) {
-		set_bit(TTY_FLUSHPENDING, &tty->flags);
-		spin_unlock_irqrestore(&tty->buf.lock, flags);
+	if (test_bit(TTYP_FLUSHING, &port->iflags)) {
+		set_bit(TTYP_FLUSHPENDING, &port->iflags);
+		spin_unlock_irqrestore(&buf->lock, flags);
 		wait_event(tty->read_wait,
-				test_bit(TTY_FLUSHPENDING, &tty->flags) == 0);
+				test_bit(TTYP_FLUSHPENDING, &port->iflags) == 0);
 		return;
 	} else
-		__tty_buffer_flush(tty);
-	spin_unlock_irqrestore(&tty->buf.lock, flags);
+		__tty_buffer_flush(port);
+	spin_unlock_irqrestore(&buf->lock, flags);
 }
 
 /**
@@ -163,9 +171,9 @@ void tty_buffer_flush(struct tty_struct *tty)
  *	Locking: Caller must hold tty->buf.lock
  */
 
-static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
+static struct tty_buffer *tty_buffer_find(struct tty_port *port, size_t size)
 {
-	struct tty_buffer **tbh = &tty->buf.free;
+	struct tty_buffer **tbh = &port->buf.free;
 	while ((*tbh) != NULL) {
 		struct tty_buffer *t = *tbh;
 		if (t->size >= size) {
@@ -174,14 +182,14 @@ static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
 			t->used = 0;
 			t->commit = 0;
 			t->read = 0;
-			tty->buf.memory_used += t->size;
+			port->buf.memory_used += t->size;
 			return t;
 		}
 		tbh = &((*tbh)->next);
 	}
 	/* Round the buffer size out */
 	size = (size + 0xFF) & ~0xFF;
-	return tty_buffer_alloc(tty, size);
+	return tty_buffer_alloc(port, size);
 	/* Should possibly check if this fails for the largest buffer we
 	   have queued and recycle that ? */
 }
@@ -192,29 +200,31 @@ static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
  *
  *	Make at least size bytes of linear space available for the tty
  *	buffer. If we fail return the size we managed to find.
- *      Locking: Caller must hold tty->buf.lock
+ *      Locking: Caller must hold port->buf.lock
  */
-static int __tty_buffer_request_room(struct tty_struct *tty, size_t size)
+static int __tty_buffer_request_room(struct tty_port *port, size_t size)
 {
+	struct tty_bufhead *buf = &port->buf;
 	struct tty_buffer *b, *n;
 	int left;
 	/* OPTIMISATION: We could keep a per tty "zero" sized buffer to
 	   remove this conditional if its worth it. This would be invisible
 	   to the callers */
-	if ((b = tty->buf.tail) != NULL)
+	b = buf->tail;
+	if (b != NULL)
 		left = b->size - b->used;
 	else
 		left = 0;
 
 	if (left < size) {
 		/* This is the slow path - looking for new buffers to use */
-		if ((n = tty_buffer_find(tty, size)) != NULL) {
+		if ((n = tty_buffer_find(port, size)) != NULL) {
 			if (b != NULL) {
 				b->next = n;
 				b->commit = b->used;
 			} else
-				tty->buf.head = n;
-			tty->buf.tail = n;
+				buf->head = n;
+			buf->tail = n;
 		} else
 			size = left;
 	}
@@ -231,16 +241,17 @@ static int __tty_buffer_request_room(struct tty_struct *tty, size_t size)
  *	Make at least size bytes of linear space available for the tty
  *	buffer. If we fail return the size we managed to find.
  *
- *	Locking: Takes tty->buf.lock
+ *	Locking: Takes port->buf.lock
  */
 int tty_buffer_request_room(struct tty_struct *tty, size_t size)
 {
+	struct tty_port *port = tty->port;
 	unsigned long flags;
 	int length;
 
-	spin_lock_irqsave(&tty->buf.lock, flags);
-	length = __tty_buffer_request_room(tty, size);
-	spin_unlock_irqrestore(&tty->buf.lock, flags);
+	spin_lock_irqsave(&port->buf.lock, flags);
+	length = __tty_buffer_request_room(port, size);
+	spin_unlock_irqrestore(&port->buf.lock, flags);
 	return length;
 }
 EXPORT_SYMBOL_GPL(tty_buffer_request_room);
@@ -255,12 +266,13 @@ EXPORT_SYMBOL_GPL(tty_buffer_request_room);
  *	Queue a series of bytes to the tty buffering. All the characters
  *	passed are marked with the supplied flag. Returns the number added.
  *
- *	Locking: Called functions may take tty->buf.lock
+ *	Locking: Called functions may take port->buf.lock
  */
 
 int tty_insert_flip_string_fixed_flag(struct tty_struct *tty,
 		const unsigned char *chars, char flag, size_t size)
 {
+	struct tty_bufhead *buf = &tty->port->buf;
 	int copied = 0;
 	do {
 		int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
@@ -268,18 +280,18 @@ int tty_insert_flip_string_fixed_flag(struct tty_struct *tty,
 		unsigned long flags;
 		struct tty_buffer *tb;
 
-		spin_lock_irqsave(&tty->buf.lock, flags);
-		space = __tty_buffer_request_room(tty, goal);
-		tb = tty->buf.tail;
+		spin_lock_irqsave(&buf->lock, flags);
+		space = __tty_buffer_request_room(tty->port, goal);
+		tb = buf->tail;
 		/* If there is no space then tb may be NULL */
 		if (unlikely(space == 0)) {
-			spin_unlock_irqrestore(&tty->buf.lock, flags);
+			spin_unlock_irqrestore(&buf->lock, flags);
 			break;
 		}
 		memcpy(tb->char_buf_ptr + tb->used, chars, space);
 		memset(tb->flag_buf_ptr + tb->used, flag, space);
 		tb->used += space;
-		spin_unlock_irqrestore(&tty->buf.lock, flags);
+		spin_unlock_irqrestore(&buf->lock, flags);
 		copied += space;
 		chars += space;
 		/* There is a small chance that we need to split the data over
@@ -300,12 +312,13 @@ EXPORT_SYMBOL(tty_insert_flip_string_fixed_flag);
  *	the flags array indicates the status of the character. Returns the
  *	number added.
  *
- *	Locking: Called functions may take tty->buf.lock
+ *	Locking: Called functions may take port->buf.lock
  */
 
 int tty_insert_flip_string_flags(struct tty_struct *tty,
 		const unsigned char *chars, const char *flags, size_t size)
 {
+	struct tty_bufhead *buf = &tty->port->buf;
 	int copied = 0;
 	do {
 		int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
@@ -313,18 +326,18 @@ int tty_insert_flip_string_flags(struct tty_struct *tty,
 		unsigned long __flags;
 		struct tty_buffer *tb;
 
-		spin_lock_irqsave(&tty->buf.lock, __flags);
-		space = __tty_buffer_request_room(tty, goal);
-		tb = tty->buf.tail;
+		spin_lock_irqsave(&buf->lock, __flags);
+		space = __tty_buffer_request_room(tty->port, goal);
+		tb = buf->tail;
 		/* If there is no space then tb may be NULL */
 		if (unlikely(space == 0)) {
-			spin_unlock_irqrestore(&tty->buf.lock, __flags);
+			spin_unlock_irqrestore(&buf->lock, __flags);
 			break;
 		}
 		memcpy(tb->char_buf_ptr + tb->used, chars, space);
 		memcpy(tb->flag_buf_ptr + tb->used, flags, space);
 		tb->used += space;
-		spin_unlock_irqrestore(&tty->buf.lock, __flags);
+		spin_unlock_irqrestore(&buf->lock, __flags);
 		copied += space;
 		chars += space;
 		flags += space;
@@ -342,18 +355,23 @@ EXPORT_SYMBOL(tty_insert_flip_string_flags);
  *	Takes any pending buffers and transfers their ownership to the
  *	ldisc side of the queue. It then schedules those characters for
  *	processing by the line discipline.
+ *	Note that this function can only be used when the low_latency flag
+ *	is unset. Otherwise the workqueue won't be flushed.
  *
- *	Locking: Takes tty->buf.lock
+ *	Locking: Takes port->buf.lock
  */
 
 void tty_schedule_flip(struct tty_struct *tty)
 {
+	struct tty_bufhead *buf = &tty->port->buf;
 	unsigned long flags;
-	spin_lock_irqsave(&tty->buf.lock, flags);
-	if (tty->buf.tail != NULL)
-		tty->buf.tail->commit = tty->buf.tail->used;
-	spin_unlock_irqrestore(&tty->buf.lock, flags);
-	schedule_work(&tty->buf.work);
+	WARN_ON(tty->low_latency);
+
+	spin_lock_irqsave(&buf->lock, flags);
+	if (buf->tail != NULL)
+		buf->tail->commit = buf->tail->used;
+	spin_unlock_irqrestore(&buf->lock, flags);
+	schedule_work(&buf->work);
 }
 EXPORT_SYMBOL(tty_schedule_flip);
 
@@ -369,26 +387,27 @@ EXPORT_SYMBOL(tty_schedule_flip);
  *	that need their own block copy routines into the buffer. There is no
  *	guarantee the buffer is a DMA target!
  *
- *	Locking: May call functions taking tty->buf.lock
+ *	Locking: May call functions taking port->buf.lock
  */
 
 int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars,
-								size_t size)
+		size_t size)
 {
+	struct tty_bufhead *buf = &tty->port->buf;
 	int space;
 	unsigned long flags;
 	struct tty_buffer *tb;
 
-	spin_lock_irqsave(&tty->buf.lock, flags);
-	space = __tty_buffer_request_room(tty, size);
+	spin_lock_irqsave(&buf->lock, flags);
+	space = __tty_buffer_request_room(tty->port, size);
 
-	tb = tty->buf.tail;
+	tb = buf->tail;
 	if (likely(space)) {
 		*chars = tb->char_buf_ptr + tb->used;
 		memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
 		tb->used += space;
 	}
-	spin_unlock_irqrestore(&tty->buf.lock, flags);
+	spin_unlock_irqrestore(&buf->lock, flags);
 	return space;
 }
 EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
@@ -406,26 +425,27 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
  *	that need their own block copy routines into the buffer. There is no
  *	guarantee the buffer is a DMA target!
  *
- *	Locking: May call functions taking tty->buf.lock
+ *	Locking: May call functions taking port->buf.lock
  */
 
 int tty_prepare_flip_string_flags(struct tty_struct *tty,
 			unsigned char **chars, char **flags, size_t size)
 {
+	struct tty_bufhead *buf = &tty->port->buf;
 	int space;
 	unsigned long __flags;
 	struct tty_buffer *tb;
 
-	spin_lock_irqsave(&tty->buf.lock, __flags);
-	space = __tty_buffer_request_room(tty, size);
+	spin_lock_irqsave(&buf->lock, __flags);
+	space = __tty_buffer_request_room(tty->port, size);
 
-	tb = tty->buf.tail;
+	tb = buf->tail;
 	if (likely(space)) {
 		*chars = tb->char_buf_ptr + tb->used;
 		*flags = tb->flag_buf_ptr + tb->used;
 		tb->used += space;
 	}
-	spin_unlock_irqrestore(&tty->buf.lock, __flags);
+	spin_unlock_irqrestore(&buf->lock, __flags);
 	return space;
 }
 EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
@@ -446,20 +466,25 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
 
 static void flush_to_ldisc(struct work_struct *work)
 {
-	struct tty_struct *tty =
-		container_of(work, struct tty_struct, buf.work);
+	struct tty_port *port = container_of(work, struct tty_port, buf.work);
+	struct tty_bufhead *buf = &port->buf;
+	struct tty_struct *tty;
 	unsigned long 	flags;
 	struct tty_ldisc *disc;
 
+	tty = port->itty;
+	if (WARN_RATELIMIT(tty == NULL, "tty is NULL\n"))
+		return;
+
 	disc = tty_ldisc_ref(tty);
 	if (disc == NULL)	/*  !TTY_LDISC */
 		return;
 
-	spin_lock_irqsave(&tty->buf.lock, flags);
+	spin_lock_irqsave(&buf->lock, flags);
 
-	if (!test_and_set_bit(TTY_FLUSHING, &tty->flags)) {
+	if (!test_and_set_bit(TTYP_FLUSHING, &port->iflags)) {
 		struct tty_buffer *head;
-		while ((head = tty->buf.head) != NULL) {
+		while ((head = buf->head) != NULL) {
 			int count;
 			char *char_buf;
 			unsigned char *flag_buf;
@@ -468,14 +493,14 @@ static void flush_to_ldisc(struct work_struct *work)
 			if (!count) {
 				if (head->next == NULL)
 					break;
-				tty->buf.head = head->next;
-				tty_buffer_free(tty, head);
+				buf->head = head->next;
+				tty_buffer_free(port, head);
 				continue;
 			}
 			/* Ldisc or user is trying to flush the buffers
 			   we are feeding to the ldisc, stop feeding the
 			   line discipline as we want to empty the queue */
-			if (test_bit(TTY_FLUSHPENDING, &tty->flags))
+			if (test_bit(TTYP_FLUSHPENDING, &port->iflags))
 				break;
 			if (!tty->receive_room)
 				break;
@@ -484,22 +509,22 @@ static void flush_to_ldisc(struct work_struct *work)
 			char_buf = head->char_buf_ptr + head->read;
 			flag_buf = head->flag_buf_ptr + head->read;
 			head->read += count;
-			spin_unlock_irqrestore(&tty->buf.lock, flags);
+			spin_unlock_irqrestore(&buf->lock, flags);
 			disc->ops->receive_buf(tty, char_buf,
 							flag_buf, count);
-			spin_lock_irqsave(&tty->buf.lock, flags);
+			spin_lock_irqsave(&buf->lock, flags);
 		}
-		clear_bit(TTY_FLUSHING, &tty->flags);
+		clear_bit(TTYP_FLUSHING, &port->iflags);
 	}
 
 	/* We may have a deferred request to flush the input buffer,
 	   if so pull the chain under the lock and empty the queue */
-	if (test_bit(TTY_FLUSHPENDING, &tty->flags)) {
-		__tty_buffer_flush(tty);
-		clear_bit(TTY_FLUSHPENDING, &tty->flags);
+	if (test_bit(TTYP_FLUSHPENDING, &port->iflags)) {
+		__tty_buffer_flush(port);
+		clear_bit(TTYP_FLUSHPENDING, &port->iflags);
 		wake_up(&tty->read_wait);
 	}
-	spin_unlock_irqrestore(&tty->buf.lock, flags);
+	spin_unlock_irqrestore(&buf->lock, flags);
 
 	tty_ldisc_deref(disc);
 }
@@ -514,7 +539,8 @@ static void flush_to_ldisc(struct work_struct *work)
  */
 void tty_flush_to_ldisc(struct tty_struct *tty)
 {
-	flush_work(&tty->buf.work);
+	if (!tty->low_latency)
+		flush_work(&tty->port->buf.work);
 }
 
 /**
@@ -532,16 +558,18 @@ void tty_flush_to_ldisc(struct tty_struct *tty)
 
 void tty_flip_buffer_push(struct tty_struct *tty)
 {
+	struct tty_bufhead *buf = &tty->port->buf;
 	unsigned long flags;
-	spin_lock_irqsave(&tty->buf.lock, flags);
-	if (tty->buf.tail != NULL)
-		tty->buf.tail->commit = tty->buf.tail->used;
-	spin_unlock_irqrestore(&tty->buf.lock, flags);
+
+	spin_lock_irqsave(&buf->lock, flags);
+	if (buf->tail != NULL)
+		buf->tail->commit = buf->tail->used;
+	spin_unlock_irqrestore(&buf->lock, flags);
 
 	if (tty->low_latency)
-		flush_to_ldisc(&tty->buf.work);
+		flush_to_ldisc(&buf->work);
 	else
-		schedule_work(&tty->buf.work);
+		schedule_work(&buf->work);
 }
 EXPORT_SYMBOL(tty_flip_buffer_push);
 
@@ -555,13 +583,15 @@ EXPORT_SYMBOL(tty_flip_buffer_push);
  *	Locking: none
  */
 
-void tty_buffer_init(struct tty_struct *tty)
+void tty_buffer_init(struct tty_port *port)
 {
-	spin_lock_init(&tty->buf.lock);
-	tty->buf.head = NULL;
-	tty->buf.tail = NULL;
-	tty->buf.free = NULL;
-	tty->buf.memory_used = 0;
-	INIT_WORK(&tty->buf.work, flush_to_ldisc);
+	struct tty_bufhead *buf = &port->buf;
+
+	spin_lock_init(&buf->lock);
+	buf->head = NULL;
+	buf->tail = NULL;
+	buf->free = NULL;
+	buf->memory_used = 0;
+	INIT_WORK(&buf->work, flush_to_ldisc);
 }
 
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 2ea176b2280..da9fde85075 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -186,7 +186,6 @@ void free_tty_struct(struct tty_struct *tty)
 	if (tty->dev)
 		put_device(tty->dev);
 	kfree(tty->write_buf);
-	tty_buffer_free_all(tty);
 	tty->magic = 0xDEADDEAD;
 	kfree(tty);
 }
@@ -237,7 +236,7 @@ void tty_free_file(struct file *file)
 }
 
 /* Delete file from its tty */
-void tty_del_file(struct file *file)
+static void tty_del_file(struct file *file)
 {
 	struct tty_file_private *priv = file->private_data;
 
@@ -555,7 +554,7 @@ EXPORT_SYMBOL_GPL(tty_wakeup);
  *		  tasklist_lock to walk task list for hangup event
  *		    ->siglock to protect ->signal/->sighand
  */
-void __tty_hangup(struct tty_struct *tty)
+static void __tty_hangup(struct tty_struct *tty)
 {
 	struct file *cons_filp = NULL;
 	struct file *filp, *f = NULL;
@@ -1417,6 +1416,8 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
 			"%s: %s driver does not set tty->port. This will crash the kernel later. Fix the driver!\n",
 			__func__, tty->driver->name);
 
+	tty->port->itty = tty;
+
 	/*
 	 * Structures all installed ... call the ldisc open routines.
 	 * If we fail here just call release_tty to clean up.  No need
@@ -1552,6 +1553,7 @@ static void release_tty(struct tty_struct *tty, int idx)
 		tty->ops->shutdown(tty);
 	tty_free_termios(tty);
 	tty_driver_remove_tty(tty->driver, tty);
+	tty->port->itty = NULL;
 
 	if (tty->link)
 		tty_kref_put(tty->link);
@@ -1625,7 +1627,6 @@ int tty_release(struct inode *inode, struct file *filp)
 	struct tty_struct *tty = file_tty(filp);
 	struct tty_struct *o_tty;
 	int	pty_master, tty_closing, o_tty_closing, do_sleep;
-	int	devpts;
 	int	idx;
 	char	buf[64];
 
@@ -1640,7 +1641,6 @@ int tty_release(struct inode *inode, struct file *filp)
 	idx = tty->index;
 	pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
 		      tty->driver->subtype == PTY_TYPE_MASTER);
-	devpts = (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM) != 0;
 	/* Review: parallel close */
 	o_tty = tty->link;
 
@@ -1799,9 +1799,6 @@ int tty_release(struct inode *inode, struct file *filp)
 	release_tty(tty, idx);
 	mutex_unlock(&tty_mutex);
 
-	/* Make this pty number available for reallocation */
-	if (devpts)
-		devpts_kill_index(inode, idx);
 	return 0;
 }
 
@@ -2690,6 +2687,11 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	case TIOCNXCL:
 		clear_bit(TTY_EXCLUSIVE, &tty->flags);
 		return 0;
+	case TIOCGEXCL:
+	{
+		int excl = test_bit(TTY_EXCLUSIVE, &tty->flags);
+		return put_user(excl, (int __user *)p);
+	}
 	case TIOCNOTTY:
 		if (current->signal->tty != tty)
 			return -ENOTTY;
@@ -2937,19 +2939,13 @@ void initialize_tty_struct(struct tty_struct *tty,
 	tty_ldisc_init(tty);
 	tty->session = NULL;
 	tty->pgrp = NULL;
-	tty->overrun_time = jiffies;
-	tty_buffer_init(tty);
 	mutex_init(&tty->legacy_mutex);
 	mutex_init(&tty->termios_mutex);
 	mutex_init(&tty->ldisc_mutex);
 	init_waitqueue_head(&tty->write_wait);
 	init_waitqueue_head(&tty->read_wait);
 	INIT_WORK(&tty->hangup_work, do_tty_hangup);
-	mutex_init(&tty->atomic_read_lock);
 	mutex_init(&tty->atomic_write_lock);
-	mutex_init(&tty->output_lock);
-	mutex_init(&tty->echo_lock);
-	spin_lock_init(&tty->read_lock);
 	spin_lock_init(&tty->ctrl_lock);
 	INIT_LIST_HEAD(&tty->tty_files);
 	INIT_WORK(&tty->SAK_work, do_SAK_work);
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 12b1fa0f4f8..8481b29d5b3 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -1118,7 +1118,6 @@ EXPORT_SYMBOL_GPL(tty_perform_flush);
 int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
 		       unsigned int cmd, unsigned long arg)
 {
-	unsigned long flags;
 	int retval;
 
 	switch (cmd) {
@@ -1153,26 +1152,6 @@ int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
 		return 0;
 	case TCFLSH:
 		return tty_perform_flush(tty, arg);
-	case TIOCPKT:
-	{
-		int pktmode;
-
-		if (tty->driver->type != TTY_DRIVER_TYPE_PTY ||
-		    tty->driver->subtype != PTY_TYPE_MASTER)
-			return -ENOTTY;
-		if (get_user(pktmode, (int __user *) arg))
-			return -EFAULT;
-		spin_lock_irqsave(&tty->ctrl_lock, flags);
-		if (pktmode) {
-			if (!tty->packet) {
-				tty->packet = 1;
-				tty->link->ctrl_status = 0;
-			}
-		} else
-			tty->packet = 0;
-		spin_unlock_irqrestore(&tty->ctrl_lock, flags);
-		return 0;
-	}
 	default:
 		/* Try the mode commands */
 		return tty_mode_ioctl(tty, file, cmd, arg);
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 0f2a2c5e704..c5782294e53 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -26,7 +26,7 @@
  *	callers who will do ldisc lookups and cannot sleep.
  */
 
-static DEFINE_SPINLOCK(tty_ldisc_lock);
+static DEFINE_RAW_SPINLOCK(tty_ldisc_lock);
 static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
 /* Line disc dispatch table */
 static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
@@ -49,21 +49,21 @@ static void put_ldisc(struct tty_ldisc *ld)
 	 * If this is the last user, free the ldisc, and
 	 * release the ldisc ops.
 	 *
-	 * We really want an "atomic_dec_and_lock_irqsave()",
+	 * We really want an "atomic_dec_and_raw_lock_irqsave()",
 	 * but we don't have it, so this does it by hand.
 	 */
-	local_irq_save(flags);
-	if (atomic_dec_and_lock(&ld->users, &tty_ldisc_lock)) {
+	raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
+	if (atomic_dec_and_test(&ld->users)) {
 		struct tty_ldisc_ops *ldo = ld->ops;
 
 		ldo->refcount--;
 		module_put(ldo->owner);
-		spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+		raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
 
 		kfree(ld);
 		return;
 	}
-	local_irq_restore(flags);
+	raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
 	wake_up(&ld->wq_idle);
 }
 
@@ -88,11 +88,11 @@ int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc)
 	if (disc < N_TTY || disc >= NR_LDISCS)
 		return -EINVAL;
 
-	spin_lock_irqsave(&tty_ldisc_lock, flags);
+	raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
 	tty_ldiscs[disc] = new_ldisc;
 	new_ldisc->num = disc;
 	new_ldisc->refcount = 0;
-	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+	raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
 
 	return ret;
 }
@@ -118,12 +118,12 @@ int tty_unregister_ldisc(int disc)
 	if (disc < N_TTY || disc >= NR_LDISCS)
 		return -EINVAL;
 
-	spin_lock_irqsave(&tty_ldisc_lock, flags);
+	raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
 	if (tty_ldiscs[disc]->refcount)
 		ret = -EBUSY;
 	else
 		tty_ldiscs[disc] = NULL;
-	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+	raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
 
 	return ret;
 }
@@ -134,7 +134,7 @@ static struct tty_ldisc_ops *get_ldops(int disc)
 	unsigned long flags;
 	struct tty_ldisc_ops *ldops, *ret;
 
-	spin_lock_irqsave(&tty_ldisc_lock, flags);
+	raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
 	ret = ERR_PTR(-EINVAL);
 	ldops = tty_ldiscs[disc];
 	if (ldops) {
@@ -144,7 +144,7 @@ static struct tty_ldisc_ops *get_ldops(int disc)
 			ret = ldops;
 		}
 	}
-	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+	raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
 	return ret;
 }
 
@@ -152,10 +152,10 @@ static void put_ldops(struct tty_ldisc_ops *ldops)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&tty_ldisc_lock, flags);
+	raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
 	ldops->refcount--;
 	module_put(ldops->owner);
-	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+	raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
 }
 
 /**
@@ -287,11 +287,11 @@ static struct tty_ldisc *tty_ldisc_try(struct tty_struct *tty)
 	unsigned long flags;
 	struct tty_ldisc *ld;
 
-	spin_lock_irqsave(&tty_ldisc_lock, flags);
+	raw_spin_lock_irqsave(&tty_ldisc_lock, flags);
 	ld = NULL;
 	if (test_bit(TTY_LDISC, &tty->flags))
 		ld = get_ldisc(tty->ldisc);
-	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+	raw_spin_unlock_irqrestore(&tty_ldisc_lock, flags);
 	return ld;
 }
 
@@ -512,7 +512,7 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
 static int tty_ldisc_halt(struct tty_struct *tty)
 {
 	clear_bit(TTY_LDISC, &tty->flags);
-	return cancel_work_sync(&tty->buf.work);
+	return cancel_work_sync(&tty->port->buf.work);
 }
 
 /**
@@ -525,7 +525,7 @@ static void tty_ldisc_flush_works(struct tty_struct *tty)
 {
 	flush_work(&tty->hangup_work);
 	flush_work(&tty->SAK_work);
-	flush_work(&tty->buf.work);
+	flush_work(&tty->port->buf.work);
 }
 
 /**
@@ -704,9 +704,9 @@ enable:
 	/* Restart the work queue in case no characters kick it off. Safe if
 	   already running */
 	if (work)
-		schedule_work(&tty->buf.work);
+		schedule_work(&tty->port->buf.work);
 	if (o_work)
-		schedule_work(&o_tty->buf.work);
+		schedule_work(&o_tty->port->buf.work);
 	mutex_unlock(&tty->ldisc_mutex);
 	tty_unlock(tty);
 	return retval;
@@ -817,7 +817,7 @@ void tty_ldisc_hangup(struct tty_struct *tty)
 	 */
 	clear_bit(TTY_LDISC, &tty->flags);
 	tty_unlock(tty);
-	cancel_work_sync(&tty->buf.work);
+	cancel_work_sync(&tty->port->buf.work);
 	mutex_unlock(&tty->ldisc_mutex);
 retry:
 	tty_lock(tty);
@@ -897,6 +897,11 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty)
 
 static void tty_ldisc_kill(struct tty_struct *tty)
 {
+	/* There cannot be users from userspace now. But there still might be
+	 * drivers holding a reference via tty_ldisc_ref. Do not steal them the
+	 * ldisc until they are done. */
+	tty_ldisc_wait_idle(tty, MAX_SCHEDULE_TIMEOUT);
+
 	mutex_lock(&tty->ldisc_mutex);
 	/*
 	 * Now kill off the ldisc
diff --git a/drivers/tty/tty_mutex.c b/drivers/tty/tty_mutex.c
index 67feac9e6eb..2e41abebbcb 100644
--- a/drivers/tty/tty_mutex.c
+++ b/drivers/tty/tty_mutex.c
@@ -19,7 +19,7 @@ static void __lockfunc tty_lock_nested(struct tty_struct *tty,
 				       unsigned int subclass)
 {
 	if (tty->magic != TTY_MAGIC) {
-		printk(KERN_ERR "L Bad %p\n", tty);
+		pr_err("L Bad %p\n", tty);
 		WARN_ON(1);
 		return;
 	}
@@ -36,7 +36,7 @@ EXPORT_SYMBOL(tty_lock);
 void __lockfunc tty_unlock(struct tty_struct *tty)
 {
 	if (tty->magic != TTY_MAGIC) {
-		printk(KERN_ERR "U Bad %p\n", tty);
+		pr_err("U Bad %p\n", tty);
 		WARN_ON(1);
 		return;
 	}
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index d7bdd8d0c23..b7ff59d3db8 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -21,6 +21,7 @@
 void tty_port_init(struct tty_port *port)
 {
 	memset(port, 0, sizeof(*port));
+	tty_buffer_init(port);
 	init_waitqueue_head(&port->open_wait);
 	init_waitqueue_head(&port->close_wait);
 	init_waitqueue_head(&port->delta_msr_wait);
@@ -121,12 +122,27 @@ void tty_port_free_xmit_buf(struct tty_port *port)
 }
 EXPORT_SYMBOL(tty_port_free_xmit_buf);
 
+/**
+ * tty_port_destroy -- destroy inited port
+ * @port: tty port to be doestroyed
+ *
+ * When a port was initialized using tty_port_init, one has to destroy the
+ * port by this function. Either indirectly by using tty_port refcounting
+ * (tty_port_put) or directly if refcounting is not used.
+ */
+void tty_port_destroy(struct tty_port *port)
+{
+	tty_buffer_free_all(port);
+}
+EXPORT_SYMBOL(tty_port_destroy);
+
 static void tty_port_destructor(struct kref *kref)
 {
 	struct tty_port *port = container_of(kref, struct tty_port, kref);
 	if (port->xmit_buf)
 		free_page((unsigned long)port->xmit_buf);
-	if (port->ops->destruct)
+	tty_port_destroy(port);
+	if (port->ops && port->ops->destruct)
 		port->ops->destruct(port);
 	else
 		kfree(port);
diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index 2aaa0c22840..248381b3072 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -410,10 +410,8 @@ static void con_release_unimap(struct uni_pagedir *p)
 		kfree(p->inverse_translations[i]);
 		p->inverse_translations[i] = NULL;
 	}
-	if (p->inverse_trans_unicode) {
-		kfree(p->inverse_trans_unicode);
-		p->inverse_trans_unicode = NULL;
-	}
+	kfree(p->inverse_trans_unicode);
+	p->inverse_trans_unicode = NULL;
 }
 
 /* Caller must hold the console lock */
diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index 8e9b4be97a2..60b7b692605 100644
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -341,15 +341,11 @@ int paste_selection(struct tty_struct *tty)
 	struct  tty_ldisc *ld;
 	DECLARE_WAITQUEUE(wait, current);
 
-
 	console_lock();
 	poke_blanked_console();
 	console_unlock();
 
-	/* FIXME: wtf is this supposed to achieve ? */
-	ld = tty_ldisc_ref(tty);
-	if (!ld)
-		ld = tty_ldisc_ref_wait(tty);
+	ld = tty_ldisc_ref_wait(tty);
 
 	/* FIXME: this is completely unsafe */
 	add_wait_queue(&vc->paste_wait, &wait);
@@ -361,8 +357,7 @@ int paste_selection(struct tty_struct *tty)
 		}
 		count = sel_buffer_lth - pasted;
 		count = min(count, tty->receive_room);
-		tty->ldisc->ops->receive_buf(tty, sel_buffer + pasted,
-								NULL, count);
+		ld->ops->receive_buf(tty, sel_buffer + pasted, NULL, count);
 		pasted += count;
 	}
 	remove_wait_queue(&vc->paste_wait, &wait);
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 4e0d0c3734b..8fd89687d06 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -779,6 +779,7 @@ int vc_allocate(unsigned int currcons)	/* return 0 on success */
 		con_set_default_unimap(vc);
 	    vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL);
 	    if (!vc->vc_screenbuf) {
+		tty_port_destroy(&vc->port);
 		kfree(vc);
 		vc_cons[currcons].d = NULL;
 		return -ENOMEM;
@@ -999,8 +1000,10 @@ void vc_deallocate(unsigned int currcons)
 		put_pid(vc->vt_pid);
 		module_put(vc->vc_sw->owner);
 		kfree(vc->vc_screenbuf);
-		if (currcons >= MIN_NR_CONSOLES)
+		if (currcons >= MIN_NR_CONSOLES) {
+			tty_port_destroy(&vc->port);
 			kfree(vc);
+		}
 		vc_cons[currcons].d = NULL;
 	}
 }
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index b841f56d2e6..98ff1735eaf 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -25,6 +25,7 @@
 #include <linux/console.h>
 #include <linux/consolemap.h>
 #include <linux/signal.h>
+#include <linux/suspend.h>
 #include <linux/timex.h>
 
 #include <asm/io.h>