tty: move a number of tty drivers from drivers/char/ to drivers/tty/

As planned by Arnd Bergmann, this moves the following drivers from
drivers/char/ to drivers/tty/ as that's where they really belong:
	amiserial
	nozomi
	synclink
	rocket
	cyclades
	moxa
	mxser
	isicom
	bfin_jtag_comm

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 5600 insertions, 0 deletions

diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
new file mode 100644
index 00000000000..32734369447
--- /dev/null
+++ b/drivers/tty/synclinkmp.c
@@ -0,0 +1,5600 @@
+/*
+ * $Id: synclinkmp.c,v 4.38 2005/07/15 13:29:44 paulkf Exp $
+ *
+ * Device driver for Microgate SyncLink Multiport
+ * high speed multiprotocol serial adapter.
+ *
+ * written by Paul Fulghum for Microgate Corporation
+ * paulkf@microgate.com
+ *
+ * Microgate and SyncLink are trademarks of Microgate Corporation
+ *
+ * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
+ * This code is released under the GNU General Public License (GPL)
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
+#if defined(__i386__)
+#  define BREAKPOINT() asm("   int $3");
+#else
+#  define BREAKPOINT() { }
+#endif
+
+#define MAX_DEVICES 12
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/ioctl.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <linux/bitops.h>
+#include <asm/types.h>
+#include <linux/termios.h>
+#include <linux/workqueue.h>
+#include <linux/hdlc.h>
+#include <linux/synclink.h>
+
+#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINKMP_MODULE))
+#define SYNCLINK_GENERIC_HDLC 1
+#else
+#define SYNCLINK_GENERIC_HDLC 0
+#endif
+
+#define GET_USER(error,value,addr) error = get_user(value,addr)
+#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
+#define PUT_USER(error,value,addr) error = put_user(value,addr)
+#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
+
+#include <asm/uaccess.h>
+
+static MGSL_PARAMS default_params = {
+	MGSL_MODE_HDLC,			/* unsigned long mode */
+	0,				/* unsigned char loopback; */
+	HDLC_FLAG_UNDERRUN_ABORT15,	/* unsigned short flags; */
+	HDLC_ENCODING_NRZI_SPACE,	/* unsigned char encoding; */
+	0,				/* unsigned long clock_speed; */
+	0xff,				/* unsigned char addr_filter; */
+	HDLC_CRC_16_CCITT,		/* unsigned short crc_type; */
+	HDLC_PREAMBLE_LENGTH_8BITS,	/* unsigned char preamble_length; */
+	HDLC_PREAMBLE_PATTERN_NONE,	/* unsigned char preamble; */
+	9600,				/* unsigned long data_rate; */
+	8,				/* unsigned char data_bits; */
+	1,				/* unsigned char stop_bits; */
+	ASYNC_PARITY_NONE		/* unsigned char parity; */
+};
+
+/* size in bytes of DMA data buffers */
+#define SCABUFSIZE 	1024
+#define SCA_MEM_SIZE	0x40000
+#define SCA_BASE_SIZE   512
+#define SCA_REG_SIZE    16
+#define SCA_MAX_PORTS   4
+#define SCAMAXDESC 	128
+
+#define	BUFFERLISTSIZE	4096
+
+/* SCA-I style DMA buffer descriptor */
+typedef struct _SCADESC
+{
+	u16	next;		/* lower l6 bits of next descriptor addr */
+	u16	buf_ptr;	/* lower 16 bits of buffer addr */
+	u8	buf_base;	/* upper 8 bits of buffer addr */
+	u8	pad1;
+	u16	length;		/* length of buffer */
+	u8	status;		/* status of buffer */
+	u8	pad2;
+} SCADESC, *PSCADESC;
+
+typedef struct _SCADESC_EX
+{
+	/* device driver bookkeeping section */
+	char 	*virt_addr;    	/* virtual address of data buffer */
+	u16	phys_entry;	/* lower 16-bits of physical address of this descriptor */
+} SCADESC_EX, *PSCADESC_EX;
+
+/* The queue of BH actions to be performed */
+
+#define BH_RECEIVE  1
+#define BH_TRANSMIT 2
+#define BH_STATUS   4
+
+#define IO_PIN_SHUTDOWN_LIMIT 100
+
+struct	_input_signal_events {
+	int	ri_up;
+	int	ri_down;
+	int	dsr_up;
+	int	dsr_down;
+	int	dcd_up;
+	int	dcd_down;
+	int	cts_up;
+	int	cts_down;
+};
+
+/*
+ * Device instance data structure
+ */
+typedef struct _synclinkmp_info {
+	void *if_ptr;				/* General purpose pointer (used by SPPP) */
+	int			magic;
+	struct tty_port		port;
+	int			line;
+	unsigned short		close_delay;
+	unsigned short		closing_wait;	/* time to wait before closing */
+
+	struct mgsl_icount	icount;
+
+	int			timeout;
+	int			x_char;		/* xon/xoff character */
+	u16			read_status_mask1;  /* break detection (SR1 indications) */
+	u16			read_status_mask2;  /* parity/framing/overun (SR2 indications) */
+	unsigned char 		ignore_status_mask1;  /* break detection (SR1 indications) */
+	unsigned char		ignore_status_mask2;  /* parity/framing/overun (SR2 indications) */
+	unsigned char 		*tx_buf;
+	int			tx_put;
+	int			tx_get;
+	int			tx_count;
+
+	wait_queue_head_t	status_event_wait_q;
+	wait_queue_head_t	event_wait_q;
+	struct timer_list	tx_timer;	/* HDLC transmit timeout timer */
+	struct _synclinkmp_info	*next_device;	/* device list link */
+	struct timer_list	status_timer;	/* input signal status check timer */
+
+	spinlock_t lock;		/* spinlock for synchronizing with ISR */
+	struct work_struct task;	 		/* task structure for scheduling bh */
+
+	u32 max_frame_size;			/* as set by device config */
+
+	u32 pending_bh;
+
+	bool bh_running;				/* Protection from multiple */
+	int isr_overflow;
+	bool bh_requested;
+
+	int dcd_chkcount;			/* check counts to prevent */
+	int cts_chkcount;			/* too many IRQs if a signal */
+	int dsr_chkcount;			/* is floating */
+	int ri_chkcount;
+
+	char *buffer_list;			/* virtual address of Rx & Tx buffer lists */
+	unsigned long buffer_list_phys;
+
+	unsigned int rx_buf_count;		/* count of total allocated Rx buffers */
+	SCADESC *rx_buf_list;   		/* list of receive buffer entries */
+	SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */
+	unsigned int current_rx_buf;
+
+	unsigned int tx_buf_count;		/* count of total allocated Tx buffers */
+	SCADESC *tx_buf_list;		/* list of transmit buffer entries */
+	SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */
+	unsigned int last_tx_buf;
+
+	unsigned char *tmp_rx_buf;
+	unsigned int tmp_rx_buf_count;
+
+	bool rx_enabled;
+	bool rx_overflow;
+
+	bool tx_enabled;
+	bool tx_active;
+	u32 idle_mode;
+
+	unsigned char ie0_value;
+	unsigned char ie1_value;
+	unsigned char ie2_value;
+	unsigned char ctrlreg_value;
+	unsigned char old_signals;
+
+	char device_name[25];			/* device instance name */
+
+	int port_count;
+	int adapter_num;
+	int port_num;
+
+	struct _synclinkmp_info *port_array[SCA_MAX_PORTS];
+
+	unsigned int bus_type;			/* expansion bus type (ISA,EISA,PCI) */
+
+	unsigned int irq_level;			/* interrupt level */
+	unsigned long irq_flags;
+	bool irq_requested;			/* true if IRQ requested */
+
+	MGSL_PARAMS params;			/* communications parameters */
+
+	unsigned char serial_signals;		/* current serial signal states */
+
+	bool irq_occurred;			/* for diagnostics use */
+	unsigned int init_error;		/* Initialization startup error */
+
+	u32 last_mem_alloc;
+	unsigned char* memory_base;		/* shared memory address (PCI only) */
+	u32 phys_memory_base;
+    	int shared_mem_requested;
+
+	unsigned char* sca_base;		/* HD64570 SCA Memory address */
+	u32 phys_sca_base;
+	u32 sca_offset;
+	bool sca_base_requested;
+
+	unsigned char* lcr_base;		/* local config registers (PCI only) */
+	u32 phys_lcr_base;
+	u32 lcr_offset;
+	int lcr_mem_requested;
+
+	unsigned char* statctrl_base;		/* status/control register memory */
+	u32 phys_statctrl_base;
+	u32 statctrl_offset;
+	bool sca_statctrl_requested;
+
+	u32 misc_ctrl_value;
+	char flag_buf[MAX_ASYNC_BUFFER_SIZE];
+	char char_buf[MAX_ASYNC_BUFFER_SIZE];
+	bool drop_rts_on_tx_done;
+
+	struct	_input_signal_events	input_signal_events;
+
+	/* SPPP/Cisco HDLC device parts */
+	int netcount;
+	spinlock_t netlock;
+
+#if SYNCLINK_GENERIC_HDLC
+	struct net_device *netdev;
+#endif
+
+} SLMP_INFO;
+
+#define MGSL_MAGIC 0x5401
+
+/*
+ * define serial signal status change macros
+ */
+#define	MISCSTATUS_DCD_LATCHED	(SerialSignal_DCD<<8)	/* indicates change in DCD */
+#define MISCSTATUS_RI_LATCHED	(SerialSignal_RI<<8)	/* indicates change in RI */
+#define MISCSTATUS_CTS_LATCHED	(SerialSignal_CTS<<8)	/* indicates change in CTS */
+#define MISCSTATUS_DSR_LATCHED	(SerialSignal_DSR<<8)	/* change in DSR */
+
+/* Common Register macros */
+#define LPR	0x00
+#define PABR0	0x02
+#define PABR1	0x03
+#define WCRL	0x04
+#define WCRM	0x05
+#define WCRH	0x06
+#define DPCR	0x08
+#define DMER	0x09
+#define ISR0	0x10
+#define ISR1	0x11
+#define ISR2	0x12
+#define IER0	0x14
+#define IER1	0x15
+#define IER2	0x16
+#define ITCR	0x18
+#define INTVR 	0x1a
+#define IMVR	0x1c
+
+/* MSCI Register macros */
+#define TRB	0x20
+#define TRBL	0x20
+#define TRBH	0x21
+#define SR0	0x22
+#define SR1	0x23
+#define SR2	0x24
+#define SR3	0x25
+#define FST	0x26
+#define IE0	0x28
+#define IE1	0x29
+#define IE2	0x2a
+#define FIE	0x2b
+#define CMD	0x2c
+#define MD0	0x2e
+#define MD1	0x2f
+#define MD2	0x30
+#define CTL	0x31
+#define SA0	0x32
+#define SA1	0x33
+#define IDL	0x34
+#define TMC	0x35
+#define RXS	0x36
+#define TXS	0x37
+#define TRC0	0x38
+#define TRC1	0x39
+#define RRC	0x3a
+#define CST0	0x3c
+#define CST1	0x3d
+
+/* Timer Register Macros */
+#define TCNT	0x60
+#define TCNTL	0x60
+#define TCNTH	0x61
+#define TCONR	0x62
+#define TCONRL	0x62
+#define TCONRH	0x63
+#define TMCS	0x64
+#define TEPR	0x65
+
+/* DMA Controller Register macros */
+#define DARL	0x80
+#define DARH	0x81
+#define DARB	0x82
+#define BAR	0x80
+#define BARL	0x80
+#define BARH	0x81
+#define BARB	0x82
+#define SAR	0x84
+#define SARL	0x84
+#define SARH	0x85
+#define SARB	0x86
+#define CPB	0x86
+#define CDA	0x88
+#define CDAL	0x88
+#define CDAH	0x89
+#define EDA	0x8a
+#define EDAL	0x8a
+#define EDAH	0x8b
+#define BFL	0x8c
+#define BFLL	0x8c
+#define BFLH	0x8d
+#define BCR	0x8e
+#define BCRL	0x8e
+#define BCRH	0x8f
+#define DSR	0x90
+#define DMR	0x91
+#define FCT	0x93
+#define DIR	0x94
+#define DCMD	0x95
+
+/* combine with timer or DMA register address */
+#define TIMER0	0x00
+#define TIMER1	0x08
+#define TIMER2	0x10
+#define TIMER3	0x18
+#define RXDMA 	0x00
+#define TXDMA 	0x20
+
+/* SCA Command Codes */
+#define NOOP		0x00
+#define TXRESET		0x01
+#define TXENABLE	0x02
+#define TXDISABLE	0x03
+#define TXCRCINIT	0x04
+#define TXCRCEXCL	0x05
+#define TXEOM		0x06
+#define TXABORT		0x07
+#define MPON		0x08
+#define TXBUFCLR	0x09
+#define RXRESET		0x11
+#define RXENABLE	0x12
+#define RXDISABLE	0x13
+#define RXCRCINIT	0x14
+#define RXREJECT	0x15
+#define SEARCHMP	0x16
+#define RXCRCEXCL	0x17
+#define RXCRCCALC	0x18
+#define CHRESET		0x21
+#define HUNT		0x31
+
+/* DMA command codes */
+#define SWABORT		0x01
+#define FEICLEAR	0x02
+
+/* IE0 */
+#define TXINTE 		BIT7
+#define RXINTE 		BIT6
+#define TXRDYE 		BIT1
+#define RXRDYE 		BIT0
+
+/* IE1 & SR1 */
+#define UDRN   	BIT7
+#define IDLE   	BIT6
+#define SYNCD  	BIT4
+#define FLGD   	BIT4
+#define CCTS   	BIT3
+#define CDCD   	BIT2
+#define BRKD   	BIT1
+#define ABTD   	BIT1
+#define GAPD   	BIT1
+#define BRKE   	BIT0
+#define IDLD	BIT0
+
+/* IE2 & SR2 */
+#define EOM	BIT7
+#define PMP	BIT6
+#define SHRT	BIT6
+#define PE	BIT5
+#define ABT	BIT5
+#define FRME	BIT4
+#define RBIT	BIT4
+#define OVRN	BIT3
+#define CRCE	BIT2
+
+
+/*
+ * Global linked list of SyncLink devices
+ */
+static SLMP_INFO *synclinkmp_device_list = NULL;
+static int synclinkmp_adapter_count = -1;
+static int synclinkmp_device_count = 0;
+
+/*
+ * Set this param to non-zero to load eax with the
+ * .text section address and breakpoint on module load.
+ * This is useful for use with gdb and add-symbol-file command.
+ */
+static int break_on_load = 0;
+
+/*
+ * Driver major number, defaults to zero to get auto
+ * assigned major number. May be forced as module parameter.
+ */
+static int ttymajor = 0;
+
+/*
+ * Array of user specified options for ISA adapters.
+ */
+static int debug_level = 0;
+static int maxframe[MAX_DEVICES] = {0,};
+
+module_param(break_on_load, bool, 0);
+module_param(ttymajor, int, 0);
+module_param(debug_level, int, 0);
+module_param_array(maxframe, int, NULL, 0);
+
+static char *driver_name = "SyncLink MultiPort driver";
+static char *driver_version = "$Revision: 4.38 $";
+
+static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent);
+static void synclinkmp_remove_one(struct pci_dev *dev);
+
+static struct pci_device_id synclinkmp_pci_tbl[] = {
+	{ PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, },
+	{ 0, }, /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl);
+
+MODULE_LICENSE("GPL");
+
+static struct pci_driver synclinkmp_pci_driver = {
+	.name		= "synclinkmp",
+	.id_table	= synclinkmp_pci_tbl,
+	.probe		= synclinkmp_init_one,
+	.remove		= __devexit_p(synclinkmp_remove_one),
+};
+
+
+static struct tty_driver *serial_driver;
+
+/* number of characters left in xmit buffer before we ask for more */
+#define WAKEUP_CHARS 256
+
+
+/* tty callbacks */
+
+static int  open(struct tty_struct *tty, struct file * filp);
+static void close(struct tty_struct *tty, struct file * filp);
+static void hangup(struct tty_struct *tty);
+static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
+
+static int  write(struct tty_struct *tty, const unsigned char *buf, int count);
+static int put_char(struct tty_struct *tty, unsigned char ch);
+static void send_xchar(struct tty_struct *tty, char ch);
+static void wait_until_sent(struct tty_struct *tty, int timeout);
+static int  write_room(struct tty_struct *tty);
+static void flush_chars(struct tty_struct *tty);
+static void flush_buffer(struct tty_struct *tty);
+static void tx_hold(struct tty_struct *tty);
+static void tx_release(struct tty_struct *tty);
+
+static int  ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
+static int  chars_in_buffer(struct tty_struct *tty);
+static void throttle(struct tty_struct * tty);
+static void unthrottle(struct tty_struct * tty);
+static int set_break(struct tty_struct *tty, int break_state);
+
+#if SYNCLINK_GENERIC_HDLC
+#define dev_to_port(D) (dev_to_hdlc(D)->priv)
+static void hdlcdev_tx_done(SLMP_INFO *info);
+static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size);
+static int  hdlcdev_init(SLMP_INFO *info);
+static void hdlcdev_exit(SLMP_INFO *info);
+#endif
+
+/* ioctl handlers */
+
+static int  get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount);
+static int  get_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
+static int  set_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
+static int  get_txidle(SLMP_INFO *info, int __user *idle_mode);
+static int  set_txidle(SLMP_INFO *info, int idle_mode);
+static int  tx_enable(SLMP_INFO *info, int enable);
+static int  tx_abort(SLMP_INFO *info);
+static int  rx_enable(SLMP_INFO *info, int enable);
+static int  modem_input_wait(SLMP_INFO *info,int arg);
+static int  wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr);
+static int  tiocmget(struct tty_struct *tty);
+static int  tiocmset(struct tty_struct *tty,
+			unsigned int set, unsigned int clear);
+static int  set_break(struct tty_struct *tty, int break_state);
+
+static void add_device(SLMP_INFO *info);
+static void device_init(int adapter_num, struct pci_dev *pdev);
+static int  claim_resources(SLMP_INFO *info);
+static void release_resources(SLMP_INFO *info);
+
+static int  startup(SLMP_INFO *info);
+static int  block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info);
+static int carrier_raised(struct tty_port *port);
+static void shutdown(SLMP_INFO *info);
+static void program_hw(SLMP_INFO *info);
+static void change_params(SLMP_INFO *info);
+
+static bool init_adapter(SLMP_INFO *info);
+static bool register_test(SLMP_INFO *info);
+static bool irq_test(SLMP_INFO *info);
+static bool loopback_test(SLMP_INFO *info);
+static int  adapter_test(SLMP_INFO *info);
+static bool memory_test(SLMP_INFO *info);
+
+static void reset_adapter(SLMP_INFO *info);
+static void reset_port(SLMP_INFO *info);
+static void async_mode(SLMP_INFO *info);
+static void hdlc_mode(SLMP_INFO *info);
+
+static void rx_stop(SLMP_INFO *info);
+static void rx_start(SLMP_INFO *info);
+static void rx_reset_buffers(SLMP_INFO *info);
+static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last);
+static bool rx_get_frame(SLMP_INFO *info);
+
+static void tx_start(SLMP_INFO *info);
+static void tx_stop(SLMP_INFO *info);
+static void tx_load_fifo(SLMP_INFO *info);
+static void tx_set_idle(SLMP_INFO *info);
+static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count);
+
+static void get_signals(SLMP_INFO *info);
+static void set_signals(SLMP_INFO *info);
+static void enable_loopback(SLMP_INFO *info, int enable);
+static void set_rate(SLMP_INFO *info, u32 data_rate);
+
+static int  bh_action(SLMP_INFO *info);
+static void bh_handler(struct work_struct *work);
+static void bh_receive(SLMP_INFO *info);
+static void bh_transmit(SLMP_INFO *info);
+static void bh_status(SLMP_INFO *info);
+static void isr_timer(SLMP_INFO *info);
+static void isr_rxint(SLMP_INFO *info);
+static void isr_rxrdy(SLMP_INFO *info);
+static void isr_txint(SLMP_INFO *info);
+static void isr_txrdy(SLMP_INFO *info);
+static void isr_rxdmaok(SLMP_INFO *info);
+static void isr_rxdmaerror(SLMP_INFO *info);
+static void isr_txdmaok(SLMP_INFO *info);
+static void isr_txdmaerror(SLMP_INFO *info);
+static void isr_io_pin(SLMP_INFO *info, u16 status);
+
+static int  alloc_dma_bufs(SLMP_INFO *info);
+static void free_dma_bufs(SLMP_INFO *info);
+static int  alloc_buf_list(SLMP_INFO *info);
+static int  alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count);
+static int  alloc_tmp_rx_buf(SLMP_INFO *info);
+static void free_tmp_rx_buf(SLMP_INFO *info);
+
+static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count);
+static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit);
+static void tx_timeout(unsigned long context);
+static void status_timeout(unsigned long context);
+
+static unsigned char read_reg(SLMP_INFO *info, unsigned char addr);
+static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val);
+static u16 read_reg16(SLMP_INFO *info, unsigned char addr);
+static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val);
+static unsigned char read_status_reg(SLMP_INFO * info);
+static void write_control_reg(SLMP_INFO * info);
+
+
+static unsigned char rx_active_fifo_level = 16;	// rx request FIFO activation level in bytes
+static unsigned char tx_active_fifo_level = 16;	// tx request FIFO activation level in bytes
+static unsigned char tx_negate_fifo_level = 32;	// tx request FIFO negation level in bytes
+
+static u32 misc_ctrl_value = 0x007e4040;
+static u32 lcr1_brdr_value = 0x00800028;
+
+static u32 read_ahead_count = 8;
+
+/* DPCR, DMA Priority Control
+ *
+ * 07..05  Not used, must be 0
+ * 04      BRC, bus release condition: 0=all transfers complete
+ *              1=release after 1 xfer on all channels
+ * 03      CCC, channel change condition: 0=every cycle
+ *              1=after each channel completes all xfers
+ * 02..00  PR<2..0>, priority 100=round robin
+ *
+ * 00000100 = 0x00
+ */
+static unsigned char dma_priority = 0x04;
+
+// Number of bytes that can be written to shared RAM
+// in a single write operation
+static u32 sca_pci_load_interval = 64;
+
+/*
+ * 1st function defined in .text section. Calling this function in
+ * init_module() followed by a breakpoint allows a remote debugger
+ * (gdb) to get the .text address for the add-symbol-file command.
+ * This allows remote debugging of dynamically loadable modules.
+ */
+static void* synclinkmp_get_text_ptr(void);
+static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;}
+
+static inline int sanity_check(SLMP_INFO *info,
+			       char *name, const char *routine)
+{
+#ifdef SANITY_CHECK
+	static const char *badmagic =
+		"Warning: bad magic number for synclinkmp_struct (%s) in %s\n";
+	static const char *badinfo =
+		"Warning: null synclinkmp_struct for (%s) in %s\n";
+
+	if (!info) {
+		printk(badinfo, name, routine);
+		return 1;
+	}
+	if (info->magic != MGSL_MAGIC) {
+		printk(badmagic, name, routine);
+		return 1;
+	}
+#else
+	if (!info)
+		return 1;
+#endif
+	return 0;
+}
+
+/**
+ * line discipline callback wrappers
+ *
+ * The wrappers maintain line discipline references
+ * while calling into the line discipline.
+ *
+ * ldisc_receive_buf  - pass receive data to line discipline
+ */
+
+static void ldisc_receive_buf(struct tty_struct *tty,
+			      const __u8 *data, char *flags, int count)
+{
+	struct tty_ldisc *ld;
+	if (!tty)
+		return;
+	ld = tty_ldisc_ref(tty);
+	if (ld) {
+		if (ld->ops->receive_buf)
+			ld->ops->receive_buf(tty, data, flags, count);
+		tty_ldisc_deref(ld);
+	}
+}
+
+/* tty callbacks */
+
+/* Called when a port is opened.  Init and enable port.
+ */
+static int open(struct tty_struct *tty, struct file *filp)
+{
+	SLMP_INFO *info;
+	int retval, line;
+	unsigned long flags;
+
+	line = tty->index;
+	if ((line < 0) || (line >= synclinkmp_device_count)) {
+		printk("%s(%d): open with invalid line #%d.\n",
+			__FILE__,__LINE__,line);
+		return -ENODEV;
+	}
+
+	info = synclinkmp_device_list;
+	while(info && info->line != line)
+		info = info->next_device;
+	if (sanity_check(info, tty->name, "open"))
+		return -ENODEV;
+	if ( info->init_error ) {
+		printk("%s(%d):%s device is not allocated, init error=%d\n",
+			__FILE__,__LINE__,info->device_name,info->init_error);
+		return -ENODEV;
+	}
+
+	tty->driver_data = info;
+	info->port.tty = tty;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s open(), old ref count = %d\n",
+			 __FILE__,__LINE__,tty->driver->name, info->port.count);
+
+	/* If port is closing, signal caller to try again */
+	if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
+		if (info->port.flags & ASYNC_CLOSING)
+			interruptible_sleep_on(&info->port.close_wait);
+		retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
+			-EAGAIN : -ERESTARTSYS);
+		goto cleanup;
+	}
+
+	info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+	spin_lock_irqsave(&info->netlock, flags);
+	if (info->netcount) {
+		retval = -EBUSY;
+		spin_unlock_irqrestore(&info->netlock, flags);
+		goto cleanup;
+	}
+	info->port.count++;
+	spin_unlock_irqrestore(&info->netlock, flags);
+
+	if (info->port.count == 1) {
+		/* 1st open on this device, init hardware */
+		retval = startup(info);
+		if (retval < 0)
+			goto cleanup;
+	}
+
+	retval = block_til_ready(tty, filp, info);
+	if (retval) {
+		if (debug_level >= DEBUG_LEVEL_INFO)
+			printk("%s(%d):%s block_til_ready() returned %d\n",
+				 __FILE__,__LINE__, info->device_name, retval);
+		goto cleanup;
+	}
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s open() success\n",
+			 __FILE__,__LINE__, info->device_name);
+	retval = 0;
+
+cleanup:
+	if (retval) {
+		if (tty->count == 1)
+			info->port.tty = NULL; /* tty layer will release tty struct */
+		if(info->port.count)
+			info->port.count--;
+	}
+
+	return retval;
+}
+
+/* Called when port is closed. Wait for remaining data to be
+ * sent. Disable port and free resources.
+ */
+static void close(struct tty_struct *tty, struct file *filp)
+{
+	SLMP_INFO * info = tty->driver_data;
+
+	if (sanity_check(info, tty->name, "close"))
+		return;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s close() entry, count=%d\n",
+			 __FILE__,__LINE__, info->device_name, info->port.count);
+
+	if (tty_port_close_start(&info->port, tty, filp) == 0)
+		goto cleanup;
+
+	mutex_lock(&info->port.mutex);
+ 	if (info->port.flags & ASYNC_INITIALIZED)
+ 		wait_until_sent(tty, info->timeout);
+
+	flush_buffer(tty);
+	tty_ldisc_flush(tty);
+	shutdown(info);
+	mutex_unlock(&info->port.mutex);
+
+	tty_port_close_end(&info->port, tty);
+	info->port.tty = NULL;
+cleanup:
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__,
+			tty->driver->name, info->port.count);
+}
+
+/* Called by tty_hangup() when a hangup is signaled.
+ * This is the same as closing all open descriptors for the port.
+ */
+static void hangup(struct tty_struct *tty)
+{
+	SLMP_INFO *info = tty->driver_data;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s hangup()\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	if (sanity_check(info, tty->name, "hangup"))
+		return;
+
+	mutex_lock(&info->port.mutex);
+	flush_buffer(tty);
+	shutdown(info);
+
+	spin_lock_irqsave(&info->port.lock, flags);
+	info->port.count = 0;
+	info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+	info->port.tty = NULL;
+	spin_unlock_irqrestore(&info->port.lock, flags);
+	mutex_unlock(&info->port.mutex);
+
+	wake_up_interruptible(&info->port.open_wait);
+}
+
+/* Set new termios settings
+ */
+static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+{
+	SLMP_INFO *info = tty->driver_data;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__,
+			tty->driver->name );
+
+	change_params(info);
+
+	/* Handle transition to B0 status */
+	if (old_termios->c_cflag & CBAUD &&
+	    !(tty->termios->c_cflag & CBAUD)) {
+		info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+		spin_lock_irqsave(&info->lock,flags);
+	 	set_signals(info);
+		spin_unlock_irqrestore(&info->lock,flags);
+	}
+
+	/* Handle transition away from B0 status */
+	if (!(old_termios->c_cflag & CBAUD) &&
+	    tty->termios->c_cflag & CBAUD) {
+		info->serial_signals |= SerialSignal_DTR;
+ 		if (!(tty->termios->c_cflag & CRTSCTS) ||
+ 		    !test_bit(TTY_THROTTLED, &tty->flags)) {
+			info->serial_signals |= SerialSignal_RTS;
+ 		}
+		spin_lock_irqsave(&info->lock,flags);
+	 	set_signals(info);
+		spin_unlock_irqrestore(&info->lock,flags);
+	}
+
+	/* Handle turning off CRTSCTS */
+	if (old_termios->c_cflag & CRTSCTS &&
+	    !(tty->termios->c_cflag & CRTSCTS)) {
+		tty->hw_stopped = 0;
+		tx_release(tty);
+	}
+}
+
+/* Send a block of data
+ *
+ * Arguments:
+ *
+ * 	tty		pointer to tty information structure
+ * 	buf		pointer to buffer containing send data
+ * 	count		size of send data in bytes
+ *
+ * Return Value:	number of characters written
+ */
+static int write(struct tty_struct *tty,
+		 const unsigned char *buf, int count)
+{
+	int	c, ret = 0;
+	SLMP_INFO *info = tty->driver_data;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s write() count=%d\n",
+		       __FILE__,__LINE__,info->device_name,count);
+
+	if (sanity_check(info, tty->name, "write"))
+		goto cleanup;
+
+	if (!info->tx_buf)
+		goto cleanup;
+
+	if (info->params.mode == MGSL_MODE_HDLC) {
+		if (count > info->max_frame_size) {
+			ret = -EIO;
+			goto cleanup;
+		}
+		if (info->tx_active)
+			goto cleanup;
+		if (info->tx_count) {
+			/* send accumulated data from send_char() calls */
+			/* as frame and wait before accepting more data. */
+			tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
+			goto start;
+		}
+		ret = info->tx_count = count;
+		tx_load_dma_buffer(info, buf, count);
+		goto start;
+	}
+
+	for (;;) {
+		c = min_t(int, count,
+			min(info->max_frame_size - info->tx_count - 1,
+			    info->max_frame_size - info->tx_put));
+		if (c <= 0)
+			break;
+			
+		memcpy(info->tx_buf + info->tx_put, buf, c);
+
+		spin_lock_irqsave(&info->lock,flags);
+		info->tx_put += c;
+		if (info->tx_put >= info->max_frame_size)
+			info->tx_put -= info->max_frame_size;
+		info->tx_count += c;
+		spin_unlock_irqrestore(&info->lock,flags);
+
+		buf += c;
+		count -= c;
+		ret += c;
+	}
+
+	if (info->params.mode == MGSL_MODE_HDLC) {
+		if (count) {
+			ret = info->tx_count = 0;
+			goto cleanup;
+		}
+		tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
+	}
+start:
+ 	if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
+		spin_lock_irqsave(&info->lock,flags);
+		if (!info->tx_active)
+		 	tx_start(info);
+		spin_unlock_irqrestore(&info->lock,flags);
+ 	}
+
+cleanup:
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk( "%s(%d):%s write() returning=%d\n",
+			__FILE__,__LINE__,info->device_name,ret);
+	return ret;
+}
+
+/* Add a character to the transmit buffer.
+ */
+static int put_char(struct tty_struct *tty, unsigned char ch)
+{
+	SLMP_INFO *info = tty->driver_data;
+	unsigned long flags;
+	int ret = 0;
+
+	if ( debug_level >= DEBUG_LEVEL_INFO ) {
+		printk( "%s(%d):%s put_char(%d)\n",
+			__FILE__,__LINE__,info->device_name,ch);
+	}
+
+	if (sanity_check(info, tty->name, "put_char"))
+		return 0;
+
+	if (!info->tx_buf)
+		return 0;
+
+	spin_lock_irqsave(&info->lock,flags);
+
+	if ( (info->params.mode != MGSL_MODE_HDLC) ||
+	     !info->tx_active ) {
+
+		if (info->tx_count < info->max_frame_size - 1) {
+			info->tx_buf[info->tx_put++] = ch;
+			if (info->tx_put >= info->max_frame_size)
+				info->tx_put -= info->max_frame_size;
+			info->tx_count++;
+			ret = 1;
+		}
+	}
+
+	spin_unlock_irqrestore(&info->lock,flags);
+	return ret;
+}
+
+/* Send a high-priority XON/XOFF character
+ */
+static void send_xchar(struct tty_struct *tty, char ch)
+{
+	SLMP_INFO *info = tty->driver_data;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s send_xchar(%d)\n",
+			 __FILE__,__LINE__, info->device_name, ch );
+
+	if (sanity_check(info, tty->name, "send_xchar"))
+		return;
+
+	info->x_char = ch;
+	if (ch) {
+		/* Make sure transmit interrupts are on */
+		spin_lock_irqsave(&info->lock,flags);
+		if (!info->tx_enabled)
+		 	tx_start(info);
+		spin_unlock_irqrestore(&info->lock,flags);
+	}
+}
+
+/* Wait until the transmitter is empty.
+ */
+static void wait_until_sent(struct tty_struct *tty, int timeout)
+{
+	SLMP_INFO * info = tty->driver_data;
+	unsigned long orig_jiffies, char_time;
+
+	if (!info )
+		return;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s wait_until_sent() entry\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	if (sanity_check(info, tty->name, "wait_until_sent"))
+		return;
+
+	if (!test_bit(ASYNCB_INITIALIZED, &info->port.flags))
+		goto exit;
+
+	orig_jiffies = jiffies;
+
+	/* Set check interval to 1/5 of estimated time to
+	 * send a character, and make it at least 1. The check
+	 * interval should also be less than the timeout.
+	 * Note: use tight timings here to satisfy the NIST-PCTS.
+	 */
+
+	if ( info->params.data_rate ) {
+	       	char_time = info->timeout/(32 * 5);
+		if (!char_time)
+			char_time++;
+	} else
+		char_time = 1;
+
+	if (timeout)
+		char_time = min_t(unsigned long, char_time, timeout);
+
+	if ( info->params.mode == MGSL_MODE_HDLC ) {
+		while (info->tx_active) {
+			msleep_interruptible(jiffies_to_msecs(char_time));
+			if (signal_pending(current))
+				break;
+			if (timeout && time_after(jiffies, orig_jiffies + timeout))
+				break;
+		}
+	} else {
+		/*
+		 * TODO: determine if there is something similar to USC16C32
+		 * 	 TXSTATUS_ALL_SENT status
+		 */
+		while ( info->tx_active && info->tx_enabled) {
+			msleep_interruptible(jiffies_to_msecs(char_time));
+			if (signal_pending(current))
+				break;
+			if (timeout && time_after(jiffies, orig_jiffies + timeout))
+				break;
+		}
+	}
+
+exit:
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s wait_until_sent() exit\n",
+			 __FILE__,__LINE__, info->device_name );
+}
+
+/* Return the count of free bytes in transmit buffer
+ */
+static int write_room(struct tty_struct *tty)
+{
+	SLMP_INFO *info = tty->driver_data;
+	int ret;
+