diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-01-09 14:39:59 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-01-09 14:39:59 -0800 |
commit | b3c37522928b5452588fc202eaa0f11f6e339256 (patch) | |
tree | 37bfe21d9977b15271903d1a4b304289a232e364 /drivers/tty/serial/omap-serial.c | |
parent | 2ac9d7aaccbd598b5bd19ac40761b723bb675442 (diff) | |
parent | 6d0a5636fba5a3f82ec80ab124dd4748344549c3 (diff) |
Merge tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
power management changes for omap and imx
A significant part of the changes for these two platforms went into
power management, so they are split out into a separate branch.
* tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (65 commits)
ARM: imx6: remove __CPUINIT annotation from v7_invalidate_l1
ARM: imx6: fix v7_invalidate_l1 by adding I-Cache invalidation
ARM: imx6q: resume PL310 only when CACHE_L2X0 defined
ARM: imx6q: build pm code only when CONFIG_PM selected
ARM: mx5: use generic irq chip pm interface for pm functions on
ARM: omap: pass minimal SoC/board data for UART from dt
arm/dts: Add minimal device tree support for omap2420 and omap2430
omap-serial: Add minimal device tree support
omap-serial: Use default clock speed (48Mhz) if not specified
omap-serial: Get rid of all pdev->id usage
ARM: OMAP2+: hwmod: Add a new flag to handle hwmods left enabled at init
ARM: OMAP4: PRM: use PRCM interrupt handler
ARM: OMAP3: pm: use prcm chain handler
ARM: OMAP: hwmod: add support for selecting mpu_irq for each wakeup pad
ARM: OMAP2+: mux: add support for PAD wakeup interrupts
ARM: OMAP: PRCM: add suspend prepare / finish support
ARM: OMAP: PRCM: add support for chain interrupt handler
ARM: OMAP3/4: PRM: add functions to read pending IRQs, PRM barrier
ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup
ARM: OMAP2+: mux: add wakeup-capable hwmod mux entries to dynamic list
...
Diffstat (limited to 'drivers/tty/serial/omap-serial.c')
-rw-r--r-- | drivers/tty/serial/omap-serial.c | 428 |
1 files changed, 367 insertions, 61 deletions
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index f2a1380ed67..d192dcbb82f 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -37,17 +37,24 @@ #include <linux/clk.h> #include <linux/serial_core.h> #include <linux/irq.h> +#include <linux/pm_runtime.h> +#include <linux/of.h> #include <plat/dma.h> #include <plat/dmtimer.h> #include <plat/omap-serial.h> +#define DEFAULT_CLK_SPEED 48000000 /* 48Mhz*/ + static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS]; /* Forward declaration of functions */ static void uart_tx_dma_callback(int lch, u16 ch_status, void *data); -static void serial_omap_rx_timeout(unsigned long uart_no); +static void serial_omap_rxdma_poll(unsigned long uart_no); static int serial_omap_start_rxdma(struct uart_omap_port *up); +static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1); + +static struct workqueue_struct *serial_omap_uart_wq; static inline unsigned int serial_in(struct uart_omap_port *up, int offset) { @@ -102,6 +109,8 @@ static void serial_omap_stop_rxdma(struct uart_omap_port *up) omap_free_dma(up->uart_dma.rx_dma_channel); up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE; up->uart_dma.rx_dma_used = false; + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); } } @@ -109,9 +118,12 @@ static void serial_omap_enable_ms(struct uart_port *port) { struct uart_omap_port *up = (struct uart_omap_port *)port; - dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->port.line); + + pm_runtime_get_sync(&up->pdev->dev); up->ier |= UART_IER_MSI; serial_out(up, UART_IER, up->ier); + pm_runtime_put(&up->pdev->dev); } static void serial_omap_stop_tx(struct uart_port *port) @@ -129,30 +141,40 @@ static void serial_omap_stop_tx(struct uart_port *port) omap_stop_dma(up->uart_dma.tx_dma_channel); omap_free_dma(up->uart_dma.tx_dma_channel); up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE; + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); } + pm_runtime_get_sync(&up->pdev->dev); if (up->ier & UART_IER_THRI) { up->ier &= ~UART_IER_THRI; serial_out(up, UART_IER, up->ier); } + + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); } static void serial_omap_stop_rx(struct uart_port *port) { struct uart_omap_port *up = (struct uart_omap_port *)port; + pm_runtime_get_sync(&up->pdev->dev); if (up->use_dma) serial_omap_stop_rxdma(up); up->ier &= ~UART_IER_RLSI; up->port.read_status_mask &= ~UART_LSR_DR; serial_out(up, UART_IER, up->ier); + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); } -static inline void receive_chars(struct uart_omap_port *up, int *status) +static inline void receive_chars(struct uart_omap_port *up, + unsigned int *status) { struct tty_struct *tty = up->port.state->port.tty; - unsigned int flag; - unsigned char ch, lsr = *status; + unsigned int flag, lsr = *status; + unsigned char ch = 0; int max_count = 256; do { @@ -262,7 +284,10 @@ static void serial_omap_start_tx(struct uart_port *port) int ret = 0; if (!up->use_dma) { + pm_runtime_get_sync(&up->pdev->dev); serial_omap_enable_ier_thri(up); + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); return; } @@ -272,6 +297,7 @@ static void serial_omap_start_tx(struct uart_port *port) xmit = &up->port.state->xmit; if (up->uart_dma.tx_dma_channel == OMAP_UART_DMA_CH_FREE) { + pm_runtime_get_sync(&up->pdev->dev); ret = omap_request_dma(up->uart_dma.uart_dma_tx, "UART Tx DMA", (void *)uart_tx_dma_callback, up, @@ -354,9 +380,13 @@ static inline irqreturn_t serial_omap_irq(int irq, void *dev_id) unsigned int iir, lsr; unsigned long flags; + pm_runtime_get_sync(&up->pdev->dev); iir = serial_in(up, UART_IIR); - if (iir & UART_IIR_NO_INT) + if (iir & UART_IIR_NO_INT) { + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); return IRQ_NONE; + } spin_lock_irqsave(&up->port.lock, flags); lsr = serial_in(up, UART_LSR); @@ -378,6 +408,9 @@ static inline irqreturn_t serial_omap_irq(int irq, void *dev_id) transmit_chars(up); spin_unlock_irqrestore(&up->port.lock, flags); + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); + up->port_activity = jiffies; return IRQ_HANDLED; } @@ -388,11 +421,12 @@ static unsigned int serial_omap_tx_empty(struct uart_port *port) unsigned long flags = 0; unsigned int ret = 0; - dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->pdev->id); + pm_runtime_get_sync(&up->pdev->dev); + dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->port.line); spin_lock_irqsave(&up->port.lock, flags); ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; spin_unlock_irqrestore(&up->port.lock, flags); - + pm_runtime_put(&up->pdev->dev); return ret; } @@ -402,8 +436,11 @@ static unsigned int serial_omap_get_mctrl(struct uart_port *port) unsigned int status; unsigned int ret = 0; + pm_runtime_get_sync(&up->pdev->dev); status = check_modem_status(up); - dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->pdev->id); + pm_runtime_put(&up->pdev->dev); + + dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->port.line); if (status & UART_MSR_DCD) ret |= TIOCM_CAR; @@ -421,7 +458,7 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) struct uart_omap_port *up = (struct uart_omap_port *)port; unsigned char mcr = 0; - dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->port.line); if (mctrl & TIOCM_RTS) mcr |= UART_MCR_RTS; if (mctrl & TIOCM_DTR) @@ -433,8 +470,11 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) if (mctrl & TIOCM_LOOP) mcr |= UART_MCR_LOOP; - mcr |= up->mcr; - serial_out(up, UART_MCR, mcr); + pm_runtime_get_sync(&up->pdev->dev); + up->mcr = serial_in(up, UART_MCR); + up->mcr |= mcr; + serial_out(up, UART_MCR, up->mcr); + pm_runtime_put(&up->pdev->dev); } static void serial_omap_break_ctl(struct uart_port *port, int break_state) @@ -442,7 +482,8 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state) struct uart_omap_port *up = (struct uart_omap_port *)port; unsigned long flags = 0; - dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->port.line); + pm_runtime_get_sync(&up->pdev->dev); spin_lock_irqsave(&up->port.lock, flags); if (break_state == -1) up->lcr |= UART_LCR_SBC; @@ -450,6 +491,7 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state) up->lcr &= ~UART_LCR_SBC; serial_out(up, UART_LCR, up->lcr); spin_unlock_irqrestore(&up->port.lock, flags); + pm_runtime_put(&up->pdev->dev); } static int serial_omap_startup(struct uart_port *port) @@ -466,8 +508,9 @@ static int serial_omap_startup(struct uart_port *port) if (retval) return retval; - dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line); + pm_runtime_get_sync(&up->pdev->dev); /* * Clear the FIFO buffers and disable them. * (they will be reenabled in set_termios()) @@ -505,8 +548,8 @@ static int serial_omap_startup(struct uart_port *port) (dma_addr_t *)&(up->uart_dma.tx_buf_dma_phys), 0); init_timer(&(up->uart_dma.rx_timer)); - up->uart_dma.rx_timer.function = serial_omap_rx_timeout; - up->uart_dma.rx_timer.data = up->pdev->id; + up->uart_dma.rx_timer.function = serial_omap_rxdma_poll; + up->uart_dma.rx_timer.data = up->port.line; /* Currently the buffer size is 4KB. Can increase it */ up->uart_dma.rx_buf = dma_alloc_coherent(NULL, up->uart_dma.rx_buf_size, @@ -523,6 +566,8 @@ static int serial_omap_startup(struct uart_port *port) /* Enable module level wake up */ serial_out(up, UART_OMAP_WER, OMAP_UART_WER_MOD_WKUP); + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); up->port_activity = jiffies; return 0; } @@ -532,7 +577,9 @@ static void serial_omap_shutdown(struct uart_port *port) struct uart_omap_port *up = (struct uart_omap_port *)port; unsigned long flags = 0; - dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->port.line); + + pm_runtime_get_sync(&up->pdev->dev); /* * Disable interrupts from this port */ @@ -566,6 +613,8 @@ static void serial_omap_shutdown(struct uart_port *port) up->uart_dma.rx_buf_dma_phys); up->uart_dma.rx_buf = NULL; } + + pm_runtime_put(&up->pdev->dev); free_irq(up->port.irq, up); } @@ -573,8 +622,6 @@ static inline void serial_omap_configure_xonxoff (struct uart_omap_port *up, struct ktermios *termios) { - unsigned char efr = 0; - up->lcr = serial_in(up, UART_LCR); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); up->efr = serial_in(up, UART_EFR); @@ -584,8 +631,7 @@ serial_omap_configure_xonxoff serial_out(up, UART_XOFF1, termios->c_cc[VSTOP]); /* clear SW control mode bits */ - efr = up->efr; - efr &= OMAP_UART_SW_CLR; + up->efr &= OMAP_UART_SW_CLR; /* * IXON Flag: @@ -593,7 +639,7 @@ serial_omap_configure_xonxoff * Transmit XON1, XOFF1 */ if (termios->c_iflag & IXON) - efr |= OMAP_UART_SW_TX; + up->efr |= OMAP_UART_SW_TX; /* * IXOFF Flag: @@ -601,7 +647,7 @@ serial_omap_configure_xonxoff * Receiver compares XON1, XOFF1. */ if (termios->c_iflag & IXOFF) - efr |= OMAP_UART_SW_RX; + up->efr |= OMAP_UART_SW_RX; serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); @@ -624,13 +670,21 @@ serial_omap_configure_xonxoff * load the new software flow control mode IXON or IXOFF * and restore the UARTi.EFR_REG[4] ENHANCED_EN value. */ - serial_out(up, UART_EFR, efr | UART_EFR_SCD); + serial_out(up, UART_EFR, up->efr | UART_EFR_SCD); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); serial_out(up, UART_MCR, up->mcr & ~UART_MCR_TCRTLR); serial_out(up, UART_LCR, up->lcr); } +static void serial_omap_uart_qos_work(struct work_struct *work) +{ + struct uart_omap_port *up = container_of(work, struct uart_omap_port, + qos_work); + + pm_qos_update_request(&up->pm_qos_request, up->latency); +} + static void serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) @@ -671,6 +725,16 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13); quot = serial_omap_get_divisor(port, baud); + /* calculate wakeup latency constraint */ + up->calc_latency = (1000000 * up->port.fifosize) / + (1000 * baud / 8); + up->latency = up->calc_latency; + schedule_work(&up->qos_work); + + up->dll = quot & 0xff; + up->dlh = quot >> 8; + up->mdr1 = UART_OMAP_MDR1_DISABLE; + up->fcr = UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01 | UART_FCR_ENABLE_FIFO; if (up->use_dma) @@ -680,6 +744,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, * Ok, we're now changing the port state. Do it with * interrupts disabled. */ + pm_runtime_get_sync(&up->pdev->dev); spin_lock_irqsave(&up->port.lock, flags); /* @@ -723,6 +788,8 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, up->ier |= UART_IER_MSI; serial_out(up, UART_IER, up->ier); serial_out(up, UART_LCR, cval); /* reset DLAB */ + up->lcr = cval; + up->scr = OMAP_UART_SCR_TX_EMPTY; /* FIFOs and DMA Settings */ @@ -749,17 +816,22 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, if (up->use_dma) { serial_out(up, UART_TI752_TLR, 0); - serial_out(up, UART_OMAP_SCR, - (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8)); + up->scr |= (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8); } + serial_out(up, UART_OMAP_SCR, up->scr); + serial_out(up, UART_EFR, up->efr); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); serial_out(up, UART_MCR, up->mcr); /* Protocol, Baud Rate, and Interrupt Settings */ - serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); + if (up->errata & UART_ERRATA_i202_MDR1_ACCESS) + serial_omap_mdr1_errataset(up, up->mdr1); + else + serial_out(up, UART_OMAP_MDR1, up->mdr1); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); up->efr = serial_in(up, UART_EFR); @@ -769,8 +841,8 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_out(up, UART_IER, 0); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ - serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ + serial_out(up, UART_DLL, up->dll); /* LS of divisor */ + serial_out(up, UART_DLM, up->dlh); /* MS of divisor */ serial_out(up, UART_LCR, 0); serial_out(up, UART_IER, up->ier); @@ -780,9 +852,14 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_out(up, UART_LCR, cval); if (baud > 230400 && baud != 3000000) - serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_13X_MODE); + up->mdr1 = UART_OMAP_MDR1_13X_MODE; else - serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE); + up->mdr1 = UART_OMAP_MDR1_16X_MODE; + + if (up->errata & UART_ERRATA_i202_MDR1_ACCESS) + serial_omap_mdr1_errataset(up, up->mdr1); + else + serial_out(up, UART_OMAP_MDR1, up->mdr1); /* Hardware Flow Control Configuration */ @@ -809,7 +886,8 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_omap_configure_xonxoff(up, termios); spin_unlock_irqrestore(&up->port.lock, flags); - dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id); + pm_runtime_put(&up->pdev->dev); + dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->port.line); } static void @@ -819,7 +897,9 @@ serial_omap_pm(struct uart_port *port, unsigned int state, struct uart_omap_port *up = (struct uart_omap_port *)port; unsigned char efr; - dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->port.line); + + pm_runtime_get_sync(&up->pdev->dev); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); efr = serial_in(up, UART_EFR); serial_out(up, UART_EFR, efr | UART_EFR_ECB); @@ -829,6 +909,15 @@ serial_omap_pm(struct uart_port *port, unsigned int state, serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_out(up, UART_EFR, efr); serial_out(up, UART_LCR, 0); + + if (!device_may_wakeup(&up->pdev->dev)) { + if (!state) + pm_runtime_forbid(&up->pdev->dev); + else + pm_runtime_allow(&up->pdev->dev); + } + + pm_runtime_put(&up->pdev->dev); } static void serial_omap_release_port(struct uart_port *port) @@ -847,7 +936,7 @@ static void serial_omap_config_port(struct uart_port *port, int flags) struct uart_omap_port *up = (struct uart_omap_port *)port; dev_dbg(up->port.dev, "serial_omap_config_port+%d\n", - up->pdev->id); + up->port.line); up->port.type = PORT_OMAP; } @@ -864,7 +953,7 @@ serial_omap_type(struct uart_port *port) { struct uart_omap_port *up = (struct uart_omap_port *)port; - dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->port.line); return up->name; } @@ -906,19 +995,26 @@ static inline void wait_for_xmitr(struct uart_omap_port *up) static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch) { struct uart_omap_port *up = (struct uart_omap_port *)port; + + pm_runtime_get_sync(&up->pdev->dev); wait_for_xmitr(up); serial_out(up, UART_TX, ch); + pm_runtime_put(&up->pdev->dev); } static int serial_omap_poll_get_char(struct uart_port *port) { struct uart_omap_port *up = (struct uart_omap_port *)port; - unsigned int status = serial_in(up, UART_LSR); + unsigned int status; + pm_runtime_get_sync(&up->pdev->dev); + status = serial_in(up, UART_LSR); if (!(status & UART_LSR_DR)) return NO_POLL_CHAR; - return serial_in(up, UART_RX); + status = serial_in(up, UART_RX); + pm_runtime_put(&up->pdev->dev); + return status; } #endif /* CONFIG_CONSOLE_POLL */ @@ -946,6 +1042,8 @@ serial_omap_console_write(struct console *co, const char *s, unsigned int ier; int locked = 1; + pm_runtime_get_sync(&up->pdev->dev); + local_irq_save(flags); if (up->port.sysrq) locked = 0; @@ -978,6 +1076,8 @@ serial_omap_console_write(struct console *co, const char *s, if (up->msr_saved_flags) check_modem_status(up); + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); if (locked) spin_unlock(&up->port.lock); local_irq_restore(flags); @@ -1014,7 +1114,7 @@ static struct console serial_omap_console = { static void serial_omap_add_console_port(struct uart_omap_port *up) { - serial_omap_console_ports[up->pdev->id] = up; + serial_omap_console_ports[up->port.line] = up; } #define OMAP_CONSOLE (&serial_omap_console) @@ -1060,26 +1160,30 @@ static struct uart_driver serial_omap_reg = { .cons = OMAP_CONSOLE, }; -static int -serial_omap_suspend(struct platform_device *pdev, pm_message_t state) +#ifdef CONFIG_SUSPEND +static int serial_omap_suspend(struct device *dev) { - struct uart_omap_port *up = platform_get_drvdata(pdev); + struct uart_omap_port *up = dev_get_drvdata(dev); - if (up) + if (up) { uart_suspend_port(&serial_omap_reg, &up->port); + flush_work_sync(&up->qos_work); + } + return 0; } -static int serial_omap_resume(struct platform_device *dev) +static int serial_omap_resume(struct device *dev) { - struct uart_omap_port *up = platform_get_drvdata(dev); + struct uart_omap_port *up = dev_get_drvdata(dev); if (up) uart_resume_port(&serial_omap_reg, &up->port); return 0; } +#endif -static void serial_omap_rx_timeout(unsigned long uart_no) +static void serial_omap_rxdma_poll(unsigned long uart_no) { struct uart_omap_port *up = ui[uart_no]; unsigned int curr_dma_pos, curr_transmitted_size; @@ -1089,9 +1193,9 @@ static void serial_omap_rx_timeout(unsigned long uart_no) if ((curr_dma_pos == up->uart_dma.prev_rx_dma_pos) || (curr_dma_pos == 0)) { if (jiffies_to_msecs(jiffies - up->port_activity) < - RX_TIMEOUT) { + up->uart_dma.rx_timeout) { mod_timer(&up->uart_dma.rx_timer, jiffies + - usecs_to_jiffies(up->uart_dma.rx_timeout)); + usecs_to_jiffies(up->uart_dma.rx_poll_rate)); } else { serial_omap_stop_rxdma(up); up->ier |= (UART_IER_RDI | UART_IER_RLSI); @@ -1120,7 +1224,7 @@ static void serial_omap_rx_timeout(unsigned long uart_no) } } else { mod_timer(&up->uart_dma.rx_timer, jiffies + - usecs_to_jiffies(up->uart_dma.rx_timeout)); + usecs_to_jiffies(up->uart_dma.rx_poll_rate)); } up->port_activity = jiffies; } @@ -1135,6 +1239,7 @@ static int serial_omap_start_rxdma(struct uart_omap_port *up) int ret = 0; if (up->uart_dma.rx_dma_channel == -1) { + pm_runtime_get_sync(&up->pdev->dev); ret = omap_request_dma(up->uart_dma.uart_dma_rx, "UART Rx DMA", (void *)uart_rx_dma_callback, up, @@ -1158,7 +1263,7 @@ static int serial_omap_start_rxdma(struct uart_omap_port *up) /* FIXME: Cache maintenance needed here? */ omap_start_dma(up->uart_dma.rx_dma_channel); mod_timer(&up->uart_dma.rx_timer, jiffies + - usecs_to_jiffies(up->uart_dma.rx_timeout)); + usecs_to_jiffies(up->uart_dma.rx_poll_rate)); up->uart_dma.rx_dma_used = true; return ret; } @@ -1221,6 +1326,19 @@ static void uart_tx_dma_callback(int lch, u16 ch_status, void *data) return; } +static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev) +{ + struct omap_uart_port_info *omap_up_info; + + omap_up_info = devm_kzalloc(dev, sizeof(*omap_up_info), GFP_KERNEL); + if (!omap_up_info) + return NULL; /* out of memory */ + + of_property_read_u32(dev->of_node, "clock-frequency", + &omap_up_info->uartclk); + return omap_up_info; +} + static int serial_omap_probe(struct platform_device *pdev) { struct uart_omap_port *up; @@ -1228,6 +1346,9 @@ static int serial_omap_probe(struct platform_device *pdev) struct omap_uart_port_info *omap_up_info = pdev->dev.platform_data; int ret = -ENOSPC; + if (pdev->dev.of_node) + omap_up_info = of_get_uart_port_info(&pdev->dev); + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!mem) { dev_err(&pdev->dev, "no mem resource?\n"); @@ -1263,7 +1384,6 @@ static int serial_omap_probe(struct platform_device *pdev) ret = -ENOMEM; goto do_release_region; } - sprintf(up->name, "OMAP UART%d", pdev->id); up->pdev = pdev; up->port.dev = &pdev->dev; up->port.type = PORT_OMAP; @@ -1273,34 +1393,74 @@ static int serial_omap_probe(struct platform_device *pdev) up->port.regshift = 2; up->port.fifosize = 64; up->port.ops = &serial_omap_pops; - up->port.line = pdev->id; - up->port.membase = omap_up_info->membase; - up->port.mapbase = omap_up_info->mapbase; + if (pdev->dev.of_node) + up->port.line = of_alias_get_id(pdev->dev.of_node, "serial"); + else + up->port.line = pdev->id; + + if (up->port.line < 0) { + dev_err(&pdev->dev, "failed to get alias/pdev id, errno %d\n", + up->port.line); + ret = -ENODEV; + goto err; + } + + sprintf(up->name, "OMAP UART%d", up->port.line); + up->port.mapbase = mem->start; + up->port.membase = ioremap(mem->start, resource_size(mem)); + if (!up->port.membase) { + dev_err(&pdev->dev, "can't ioremap UART\n"); + ret = -ENOMEM; + goto err; + } + up->port.flags = omap_up_info->flags; - up->port.irqflags = omap_up_info->irqflags; up->port.uartclk = omap_up_info->uartclk; + if (!up->port.uartclk) { + up->port.uartclk = DEFAULT_CLK_SPEED; + dev_warn(&pdev->dev, "No clock speed specified: using default:" + "%d\n", DEFAULT_CLK_SPEED); + } up->uart_dma.uart_base = mem->start; + up->errata = omap_up_info->errata; if (omap_up_info->dma_enabled) { up->uart_dma.uart_dma_tx = dma_tx->start; up->uart_dma.uart_dma_rx = dma_rx->start; up->use_dma = 1; - up->uart_dma.rx_buf_size = 4096; - up->uart_dma.rx_timeout = 2; + up->uart_dma.rx_buf_size = omap_up_info->dma_rx_buf_size; + up->uart_dma.rx_timeout = omap_up_info->dma_rx_timeout; + up->uart_dma.rx_poll_rate = omap_up_info->dma_rx_poll_rate; spin_lock_init(&(up->uart_dma.tx_lock)); spin_lock_init(&(up->uart_dma.rx_lock)); up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE; up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE; } - ui[pdev->id] = up; + up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE; + up->calc_latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE; + pm_qos_add_request(&up->pm_qos_request, + PM_QOS_CPU_DMA_LATENCY, up->latency); + serial_omap_uart_wq = create_singlethread_workqueue(up->name); + INIT_WORK(&up->qos_work, serial_omap_uart_qos_work); + + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, + omap_up_info->autosuspend_timeout); + + pm_runtime_irq_safe(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + + ui[up->port.line] = up; serial_omap_add_console_port(up); ret = uart_add_one_port(&serial_omap_reg, &up->port); if (ret != 0) goto do_release_region; + pm_runtime_put(&pdev->dev); platform_set_drvdata(pdev, up); return 0; err: @@ -1315,22 +1475,168 @@ static int serial_omap_remove(struct platform_device *dev) { struct uart_omap_port *up = platform_get_drvdata(dev); - platform_set_drvdata(dev, NULL); if (up) { + pm_runtime_disable(&up->pdev->dev); uart_remove_one_port(&serial_omap_reg, &up->port); + pm_qos_remove_request(&up->pm_qos_request); + kfree(up); } + + platform_set_drvdata(dev, NULL); + return 0; +} + +/* + * Work Around for Errata i202 (2430, 3430, 3630, 4430 and 4460) + * The access to uart register after MDR1 Access + * causes UART to corrupt data. + * + * Need a delay = + * 5 L4 clock cycles + 5 UART functional clock cycle (@48MHz = ~0.2uS) + * give 10 times as much + */ +static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1) +{ + u8 timeout = 255; + + serial_out(up, UART_OMAP_MDR1, mdr1); + udelay(2); + serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_XMIT | + UART_FCR_CLEAR_RCVR); + /* + * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and + * TX_FIFO_E bit is 1. + */ + while (UART_LSR_THRE != (serial_in(up, UART_LSR) & + (UART_LSR_THRE | UART_LSR_DR))) { + timeout--; + if (!timeout) { + /* Should *never* happen. we warn and carry on */ + dev_crit(&up->pdev->dev, "Errata i202: timedout %x\n", + serial_in(up, UART_LSR)); + break; + } + udelay(1); + } +} + +static void serial_omap_restore_context(struct uart_omap_port *up) +{ + if (up->errata & UART_ERRATA_i202_MDR1_ACCESS) + serial_omap_mdr1_errataset(up, UART_OMAP_MDR1_DISABLE); + else + serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */ + serial_out(up, UART_EFR, UART_EFR_ECB); + serial_out(up, UART_LCR, 0x0); /* Operational mode */ + serial_out(up, UART_IER, 0x0); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */ + serial_out(up, UART_DLL, up->dll); + serial_out(up, UART_DLM, up->dlh); + serial_out(up, UART_LCR, 0x0); /* Operational mode */ + serial_out(up, UART_IER, up->ier); + serial_out(up, UART_FCR, up->fcr); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_out(up, UART_MCR, up->mcr); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */ + serial_out(up, UART_OMAP_SCR, up->scr); + serial_out(up, UART_EFR, up->efr); + serial_out(up, UART_LCR, up->lcr); + if (up->errata & UART_ERRATA_i202_MDR1_ACCESS) + serial_omap_mdr1_errataset(up, up->mdr1); + else + serial_out(up, UART_OMAP_MDR1, up->mdr1); +} + +#ifdef CONFIG_PM_RUNTIME +static int serial_omap_runtime_suspend(struct device *dev) +{ + struct uart_omap_port *up = dev_get_drvdata(dev); + struct omap_uart_port_info *pdata = dev->platform_data; + + if (!up) + return -EINVAL; + + if (!pdata || !pdata->enable_wakeup) + return 0; + + if (pdata->get_context_loss_count) + up->context_loss_cnt = pdata->get_context_loss_count(dev); + + if (device_may_wakeup(dev)) { + if (!up->wakeups_enabled) { + pdata->enable_wakeup(up->pdev, true); + up->wakeups_enabled = true; + } + } else { + if (up->wakeups_enabled) { + pdata->enable_wakeup(up->pdev, false); + up->wakeups_enabled = false; + } + } + + /* Errata i291 */ + if (up->use_dma && pdata->set_forceidle && + (up->errata & UART_ERRATA_i291_DMA_FORCEIDLE)) + pdata->set_forceidle(up->pdev); + + up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE; + schedule_work(&up->qos_work); + + return 0; +} + +static int serial_omap_runtime_resume(struct device *dev) +{ + struct uart_omap_port *up = dev_get_drvdata(dev); + struct omap_uart_port_info *pdata = dev->platform_data; + + if (up) { + if (pdata->get_context_loss_count) { + u32 loss_cnt = pdata->get_context_loss_count(dev); + + if (up->context_loss_cnt != loss_cnt) + serial_omap_restore_context(up); + } + + /* Errata i291 */ + if (up->use_dma && pdata->set_noidle && + (up->errata & UART_ERRATA_i291_DMA_FORCEIDLE)) + pdata->set_noidle(up->pdev); + + up->latency = up->calc_latency; + schedule_work(&up->qos_work); + } + return 0; } +#endif + +static const struct dev_pm_ops serial_omap_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(serial_omap_suspend, serial_omap_resume) + SET_RUNTIME_PM_OPS(serial_omap_runtime_suspend, + serial_omap_runtime_resume, NULL) +}; + +#if defined(CONFIG_OF) +static const struct of_device_id omap_serial_of_match[] = { + { .compatible = "ti,omap2-uart" }, + { .compatible = "ti,omap3-uart" }, + { .compatible = "ti,omap4-uart" }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap_serial_of_match); +#endif static struct platform_driver serial_omap_driver = { .probe = serial_omap_probe, .remove = serial_omap_remove, - - .suspend = serial_omap_suspend, - .resume = serial_omap_resume, .driver = { .name = DRIVER_NAME, + .pm = &serial_omap_dev_pm_ops, + .of_match_table = of_match_ptr(omap_serial_of_match), }, }; |