Staging: sep: remove driver

It's currently stalled and the original submitter recommended that it
just be dropped at this point in time due.

Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 files changed, 0 insertions, 3757 deletions

diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 4a7a7a7f11b..335311a98fd 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -113,8 +113,6 @@ source "drivers/staging/vme/Kconfig"
 
 source "drivers/staging/memrar/Kconfig"
 
-source "drivers/staging/sep/Kconfig"
-
 source "drivers/staging/iio/Kconfig"
 
 source "drivers/staging/zram/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index ca5c03eb3ce..e3f1e1b6095 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_FB_UDL)		+= udlfb/
 obj-$(CONFIG_HYPERV)		+= hv/
 obj-$(CONFIG_VME_BUS)		+= vme/
 obj-$(CONFIG_MRST_RAR_HANDLER)	+= memrar/
-obj-$(CONFIG_DX_SEP)		+= sep/
 obj-$(CONFIG_IIO)		+= iio/
 obj-$(CONFIG_ZRAM)		+= zram/
 obj-$(CONFIG_WLAGS49_H2)	+= wlags49_h2/
diff --git a/drivers/staging/sep/Kconfig b/drivers/staging/sep/Kconfig
deleted file mode 100644
index 0a9c39c7f2b..00000000000
--- a/drivers/staging/sep/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-config DX_SEP
-	tristate "Discretix SEP driver"
-#	depends on MRST
-	depends on RAR_REGISTER && PCI
-	default y
-	help
-	  Discretix SEP driver
-
-	  If unsure say M. The compiled module will be
-	  called sep_driver.ko
diff --git a/drivers/staging/sep/Makefile b/drivers/staging/sep/Makefile
deleted file mode 100644
index 628d5f91941..00000000000
--- a/drivers/staging/sep/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-obj-$(CONFIG_DX_SEP) := sep_driver.o
-
diff --git a/drivers/staging/sep/TODO b/drivers/staging/sep/TODO
deleted file mode 100644
index ff0e931dab6..00000000000
--- a/drivers/staging/sep/TODO
+++ /dev/null
@@ -1,8 +0,0 @@
-Todo's so far (from Alan Cox)
-- Fix firmware loading
-- Get firmware into firmware git tree
-- Review and tidy each algorithm function
-- Check whether it can be plugged into any of the kernel crypto API
-  interfaces
-- Do something about the magic shared memory interface and replace it
-  with something saner (in Linux terms)
diff --git a/drivers/staging/sep/sep_dev.h b/drivers/staging/sep/sep_dev.h
deleted file mode 100644
index 9200524bb64..00000000000
--- a/drivers/staging/sep/sep_dev.h
+++ /dev/null
@@ -1,110 +0,0 @@
-#ifndef __SEP_DEV_H__
-#define __SEP_DEV_H__
-
-/*
- *
- *  sep_dev.h - Security Processor Device Structures
- *
- *  Copyright(c) 2009 Intel Corporation. All rights reserved.
- *  Copyright(c) 2009 Discretix. All rights reserved.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the Free
- *  Software Foundation; either version 2 of the License, or (at your option)
- *  any later version.
- *
- *  This program is distributed in the hope that it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- *  more details.
- *
- *  You should have received a copy of the GNU General Public License along with
- *  this program; if not, write to the Free Software Foundation, Inc., 59
- *  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- *  CONTACTS:
- *
- *  Alan Cox		alan@linux.intel.com
- *
- */
-
-struct sep_device {
-	/* pointer to pci dev */
-	struct pci_dev *pdev;
-
-	unsigned long in_use;
-
-	/* address of the shared memory allocated during init for SEP driver
-	   (coherent alloc) */
-	void *shared_addr;
-	/* the physical address of the shared area */
-	dma_addr_t shared_bus;
-
-	/* restricted access region (coherent alloc) */
-	dma_addr_t rar_bus;
-	void *rar_addr;
-	/* firmware regions: cache is at rar_addr */
-	unsigned long cache_size;
-
-	/* follows the cache */
-	dma_addr_t resident_bus;
-	unsigned long resident_size;
-	void *resident_addr;
-
-	/* start address of the access to the SEP registers from driver */
-	void __iomem *reg_addr;
-	/* transaction counter that coordinates the transactions between SEP and HOST */
-	unsigned long send_ct;
-	/* counter for the messages from sep */
-	unsigned long reply_ct;
-	/* counter for the number of bytes allocated in the pool for the current
-	   transaction */
-	unsigned long data_pool_bytes_allocated;
-
-	/* array of pointers to the pages that represent input data for the synchronic
-	   DMA action */
-	struct page **in_page_array;
-
-	/* array of pointers to the pages that represent out data for the synchronic
-	   DMA action */
-	struct page **out_page_array;
-
-	/* number of pages in the sep_in_page_array */
-	unsigned long in_num_pages;
-
-	/* number of pages in the sep_out_page_array */
-	unsigned long out_num_pages;
-
-	/* global data for every flow */
-	struct sep_flow_context_t flows[SEP_DRIVER_NUM_FLOWS];
-
-	/* pointer to the workqueue that handles the flow done interrupts */
-	struct workqueue_struct *flow_wq;
-
-};
-
-static struct sep_device *sep_dev;
-
-static inline void sep_write_reg(struct sep_device *dev, int reg, u32 value)
-{
-	void __iomem *addr = dev->reg_addr + reg;
-	writel(value, addr);
-}
-
-static inline u32 sep_read_reg(struct sep_device *dev, int reg)
-{
-	void __iomem *addr = dev->reg_addr + reg;
-	return readl(addr);
-}
-
-/* wait for SRAM write complete(indirect write */
-static inline void sep_wait_sram_write(struct sep_device *dev)
-{
-	u32 reg_val;
-	do
-		reg_val = sep_read_reg(dev, HW_SRAM_DATA_READY_REG_ADDR);
-	while (!(reg_val & 1));
-}
-
-
-#endif
diff --git a/drivers/staging/sep/sep_driver.c b/drivers/staging/sep/sep_driver.c
deleted file mode 100644
index ecbde3467b1..00000000000
--- a/drivers/staging/sep/sep_driver.c
+++ /dev/null
@@ -1,2742 +0,0 @@
-/*
- *
- *  sep_driver.c - Security Processor Driver main group of functions
- *
- *  Copyright(c) 2009 Intel Corporation. All rights reserved.
- *  Copyright(c) 2009 Discretix. All rights reserved.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the Free
- *  Software Foundation; either version 2 of the License, or (at your option)
- *  any later version.
- *
- *  This program is distributed in the hope that it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- *  more details.
- *
- *  You should have received a copy of the GNU General Public License along with
- *  this program; if not, write to the Free Software Foundation, Inc., 59
- *  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- *  CONTACTS:
- *
- *  Mark Allyn		mark.a.allyn@intel.com
- *
- *  CHANGES:
- *
- *  2009.06.26	Initial publish
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/cdev.h>
-#include <linux/kdev_t.h>
-#include <linux/mutex.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/poll.h>
-#include <linux/wait.h>
-#include <linux/pci.h>
-#include <linux/firmware.h>
-#include <linux/slab.h>
-#include <asm/ioctl.h>
-#include <linux/ioport.h>
-#include <asm/io.h>
-#include <linux/interrupt.h>
-#include <linux/pagemap.h>
-#include <asm/cacheflush.h>
-#include "sep_driver_hw_defs.h"
-#include "sep_driver_config.h"
-#include "sep_driver_api.h"
-#include "sep_dev.h"
-
-#if SEP_DRIVER_ARM_DEBUG_MODE
-
-#define  CRYS_SEP_ROM_length                  0x4000
-#define  CRYS_SEP_ROM_start_address           0x8000C000UL
-#define  CRYS_SEP_ROM_start_address_offset    0xC000UL
-#define  SEP_ROM_BANK_register                0x80008420UL
-#define  SEP_ROM_BANK_register_offset         0x8420UL
-#define SEP_RAR_IO_MEM_REGION_START_ADDRESS   0x82000000
-
-/*
- * THESE 2 definitions are specific to the board - must be
- * defined during integration
- */
-#define SEP_RAR_IO_MEM_REGION_START_ADDRESS   0xFF0D0000
-
-/* 2M size */
-
-static void sep_load_rom_code(struct sep_device *sep)
-{
-	/* Index variables */
-	unsigned long i, k, j;
-	u32 reg;
-	u32 error;
-	u32 warning;
-
-	/* Loading ROM from SEP_ROM_image.h file */
-	k = sizeof(CRYS_SEP_ROM);
-
-	edbg("SEP Driver: DX_CC_TST_SepRomLoader start\n");
-
-	edbg("SEP Driver: k is %lu\n", k);
-	edbg("SEP Driver: sep->reg_addr is %p\n", sep->reg_addr);
-	edbg("SEP Driver: CRYS_SEP_ROM_start_address_offset is %p\n", CRYS_SEP_ROM_start_address_offset);
-
-	for (i = 0; i < 4; i++) {
-		/* write bank */
-		sep_write_reg(sep, SEP_ROM_BANK_register_offset, i);
-
-		for (j = 0; j < CRYS_SEP_ROM_length / 4; j++) {
-			sep_write_reg(sep, CRYS_SEP_ROM_start_address_offset + 4 * j, CRYS_SEP_ROM[i * 0x1000 + j]);
-
-			k = k - 4;
-
-			if (k == 0) {
-				j = CRYS_SEP_ROM_length;
-				i = 4;
-			}
-		}
-	}
-
-	/* reset the SEP */
-	sep_write_reg(sep, HW_HOST_SEP_SW_RST_REG_ADDR, 0x1);
-
-	/* poll for SEP ROM boot finish */
-	do
-		reg = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
-	while (!reg);
-
-	edbg("SEP Driver: ROM polling ended\n");
-
-	switch (reg) {
-	case 0x1:
-		/* fatal error - read erro status from GPRO */
-		error = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
-		edbg("SEP Driver: ROM polling case 1\n");
-		break;
-	case 0x4:
-		/* Cold boot ended successfully  */
-	case 0x8:
-		/* Warmboot ended successfully */
-	case 0x10:
-		/* ColdWarm boot ended successfully */
-		error = 0;
-	case 0x2:
-		/* Boot First Phase ended  */
-		warning = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
-	case 0x20:
-		edbg("SEP Driver: ROM polling case %d\n", reg);
-		break;
-	}
-
-}
-
-#else
-static void sep_load_rom_code(struct sep_device *sep) { }
-#endif				/* SEP_DRIVER_ARM_DEBUG_MODE */
-
-
-
-/*----------------------------------------
-	DEFINES
------------------------------------------*/
-
-#define BASE_ADDRESS_FOR_SYSTEM 0xfffc0000
-#define SEP_RAR_IO_MEM_REGION_SIZE 0x40000
-
-/*--------------------------------------------
-	GLOBAL variables
---------------------------------------------*/
-
-/* debug messages level */
-static int debug;
-module_param(debug, int , 0);
-MODULE_PARM_DESC(debug, "Flag to enable SEP debug messages");
-
-/* Keep this a single static object for now to keep the conversion easy */
-
-static struct sep_device sep_instance;
-static struct sep_device *sep_dev = &sep_instance;
-
-/*
-  mutex for the access to the internals of the sep driver
-*/
-static DEFINE_MUTEX(sep_mutex);
-
-
-/* wait queue head (event) of the driver */
-static DECLARE_WAIT_QUEUE_HEAD(sep_event);
-
-/**
- *	sep_load_firmware	-	copy firmware cache/resident
- *	@sep: device we are loading
- *
- *	This functions copies the cache and resident from their source
- *	location into destination shared memory.
- */
-
-static int sep_load_firmware(struct sep_device *sep)
-{
-	const struct firmware *fw;
-	char *cache_name = "sep/cache.image.bin";
-	char *res_name = "sep/resident.image.bin";
-	int error;
-
-	edbg("SEP Driver:rar_virtual is %p\n", sep->rar_addr);
-	edbg("SEP Driver:rar_bus is %08llx\n", (unsigned long long)sep->rar_bus);
-
-	/* load cache */
-	error = request_firmware(&fw, cache_name, &sep->pdev->dev);
-	if (error) {
-		edbg("SEP Driver:cant request cache fw\n");
-		return error;
-	}
-	edbg("SEP Driver:cache %08Zx@%p\n", fw->size, (void *) fw->data);
-
-	memcpy(sep->rar_addr, (void *)fw->data, fw->size);
-	sep->cache_size = fw->size;
-	release_firmware(fw);
-
-	sep->resident_bus = sep->rar_bus + sep->cache_size;
-	sep->resident_addr = sep->rar_addr + sep->cache_size;
-
-	/* load resident */
-	error = request_firmware(&fw, res_name, &sep->pdev->dev);
-	if (error) {
-		edbg("SEP Driver:cant request res fw\n");
-		return error;
-	}
-	edbg("sep: res %08Zx@%p\n", fw->size, (void *)fw->data);
-
-	memcpy(sep->resident_addr, (void *) fw->data, fw->size);
-	sep->resident_size = fw->size;
-	release_firmware(fw);
-
-	edbg("sep: resident v %p b %08llx cache v %p b %08llx\n",
-		sep->resident_addr, (unsigned long long)sep->resident_bus,
-		sep->rar_addr, (unsigned long long)sep->rar_bus);
-	return 0;
-}
-
-MODULE_FIRMWARE("sep/cache.image.bin");
-MODULE_FIRMWARE("sep/resident.image.bin");
-
-/**
- *	sep_map_and_alloc_shared_area	-	allocate shared block
- *	@sep: security processor
- *	@size: size of shared area
- *
- *	Allocate a shared buffer in host memory that can be used by both the
- *	kernel and also the hardware interface via DMA.
- */
-
-static int sep_map_and_alloc_shared_area(struct sep_device *sep,
-							unsigned long size)
-{
-	/* shared_addr = ioremap_nocache(0xda00000,shared_area_size); */
-	sep->shared_addr = dma_alloc_coherent(&sep->pdev->dev, size,
-					&sep->shared_bus, GFP_KERNEL);
-
-	if (!sep->shared_addr) {
-		edbg("sep_driver :shared memory dma_alloc_coherent failed\n");
-		return -ENOMEM;
-	}
-	/* set the bus address of the shared area */
-	edbg("sep: shared_addr %ld bytes @%p (bus %08llx)\n",
-		size, sep->shared_addr, (unsigned long long)sep->shared_bus);
-	return 0;
-}
-
-/**
- *	sep_unmap_and_free_shared_area	-	free shared block
- *	@sep: security processor
- *
- *	Free the shared area allocated to the security processor. The
- *	processor must have finished with this and any final posted
- *	writes cleared before we do so.
- */
-static void sep_unmap_and_free_shared_area(struct sep_device *sep, int size)
-{
-	dma_free_coherent(&sep->pdev->dev, size,
-				sep->shared_addr, sep->shared_bus);
-}
-
-/**
- *	sep_shared_virt_to_bus	-	convert bus/virt addresses
- *
- *	Returns the bus address inside the shared area according
- *	to the virtual address.
- */
-
-static dma_addr_t sep_shared_virt_to_bus(struct sep_device *sep,
-						void *virt_address)
-{
-	dma_addr_t pa = sep->shared_bus + (virt_address - sep->shared_addr);
-	edbg("sep: virt to bus b %08llx v %p\n", (unsigned long long) pa,
-								virt_address);
-	return pa;
-}
-
-/**
- *	sep_shared_bus_to_virt	-	convert bus/virt addresses
- *
- *	Returns virtual address inside the shared area according
- *	to the bus address.
- */
-
-static void *sep_shared_bus_to_virt(struct sep_device *sep,
-						dma_addr_t bus_address)
-{
-	return sep->shared_addr + (bus_address - sep->shared_bus);
-}
-
-
-/**
- *	sep_try_open		-	attempt to open a SEP device
- *	@sep: device to attempt to open
- *
- *	Atomically attempt to get ownership of a SEP device.
- *	Returns 1 if the device was opened, 0 on failure.
- */
-
-static int sep_try_open(struct sep_device *sep)
-{
-	if (!test_and_set_bit(0, &sep->in_use))
-		return 1;
-	return 0;
-}
-
-/**
- *	sep_open		-	device open method
- *	@inode: inode of sep device
- *	@filp: file handle to sep device
- *
- *	Open method for the SEP device. Called when userspace opens
- *	the SEP device node. Must also release the memory data pool
- *	allocations.
- *
- *	Returns zero on success otherwise an error code.
- */
-
-static int sep_open(struct inode *inode, struct file *filp)
-{
-	if (sep_dev == NULL)
-		return -ENODEV;
-
-	/* check the blocking mode */
-	if (filp->f_flags & O_NDELAY) {
-		if (sep_try_open(sep_dev) == 0)
-			return -EAGAIN;
-	} else
-		if (wait_event_interruptible(sep_event, sep_try_open(sep_dev)) < 0)
-			return -EINTR;
-
-	/* Bind to the device, we only have one which makes it easy */
-	filp->private_data = sep_dev;
-	/* release data pool allocations */
-	sep_dev->data_pool_bytes_allocated = 0;
-	return 0;
-}
-
-
-/**
- *	sep_release		-	close a SEP device
- *	@inode: inode of SEP device
- *	@filp: file handle being closed
- *
- *	Called on the final close of a SEP device. As the open protects against
- *	multiple simultaenous opens that means this method is called when the
- *	final reference to the open handle is dropped.
- */
-
-static int sep_release(struct inode *inode, struct file *filp)
-{
-	struct sep_device *sep =  filp->private_data;
-#if 0				/*!SEP_DRIVER_POLLING_MODE */
-	/* close IMR */
-	sep_write_reg(sep, HW_HOST_IMR_REG_ADDR, 0x7FFF);
-	/* release IRQ line */
-	free_irq(SEP_DIRVER_IRQ_NUM, sep);
-
-#endif
-	/* Ensure any blocked open progresses */
-	clear_bit(0, &sep->in_use);
-	wake_up(&sep_event);
-	return 0;
-}
-
-/*---------------------------------------------------------------
-  map function - this functions maps the message shared area
------------------------------------------------------------------*/
-static int sep_mmap(struct file *filp, struct vm_area_struct *vma)
-{
-	dma_addr_t bus_addr;
-	struct sep_device *sep = filp->private_data;
-
-	dbg("-------->SEP Driver: mmap start\n");
-
-	/* check that the size of the mapped range is as the size of the message
-	   shared area */
-	if ((vma->vm_end - vma->vm_start) > SEP_DRIVER_MMMAP_AREA_SIZE) {
-		edbg("SEP Driver mmap requested size is more than allowed\n");
-		printk(KERN_WARNING "SEP Driver mmap requested size is more than allowed\n");
-		printk(KERN_WARNING "SEP Driver vma->vm_end is %08lx\n", vma->vm_end);
-		printk(KERN_WARNING "SEP Driver vma->vm_end is %08lx\n", vma->vm_start);
-		return -EAGAIN;
-	}
-
-	edbg("SEP Driver:sep->shared_addr is %p\n", sep->shared_addr);
-
-	/* get bus address */
-	bus_addr = sep->shared_bus;
-
-	edbg("SEP Driver: phys_addr is %08llx\n", (unsigned long long)bus_addr);
-
-	if (remap_pfn_range(vma, vma->vm_start, bus_addr >> PAGE_SHIFT, vma->vm_end - vma->vm_start, vma->vm_page_prot)) {
-		edbg("SEP Driver remap_page_range failed\n");
-		printk(KERN_WARNING "SEP Driver remap_page_range failed\n");
-		return -EAGAIN;
-	}
-
-	dbg("SEP Driver:<-------- mmap end\n");
-
-	return 0;
-}
-
-
-/*-----------------------------------------------
-  poll function
-*----------------------------------------------*/
-static unsigned int sep_poll(struct file *filp, poll_table * wait)
-{
-	unsigned long count;
-	unsigned int mask = 0;
-	unsigned long retval = 0;	/* flow id */
-	struct sep_device *sep = filp->private_data;
-
-	dbg("---------->SEP Driver poll: start\n");
-
-
-#if SEP_DRIVER_POLLING_MODE
-
-	while (sep->send_ct != (retval & 0x7FFFFFFF)) {
-		retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR);
-
-		for (count = 0; count < 10 * 4; count += 4)
-			edbg("Poll Debug Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_addr + SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES + count)));
-	}
-
-	sep->reply_ct++;
-#else
-	/* add the event to the polling wait table */
-	poll_wait(filp, &sep_event, wait);
-
-#endif
-
-	edbg("sep->send_ct is %lu\n", sep->send_ct);
-	edbg("sep->reply_ct is %lu\n", sep->reply_ct);
-
-	/* check if the data is ready */
-	if (sep->send_ct == sep->reply_ct) {
-		for (count = 0; count < 12 * 4; count += 4)
-			edbg("Sep Mesg Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_addr + count)));
-
-		for (count = 0; count < 10 * 4; count += 4)
-			edbg("Debug Data Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_addr + 0x1800 + count)));
-
-		retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR);
-		edbg("retval is %lu\n", retval);
-		/* check if the this is sep reply or request */
-		if (retval >> 31) {
-			edbg("SEP Driver: sep request in\n");
-			/* request */
-			mask |= POLLOUT | POLLWRNORM;
-		} else {
-			edbg("SEP Driver: sep reply in\n");
-			mask |= POLLIN | POLLRDNORM;
-		}
-	}
-	dbg("SEP Driver:<-------- poll exit\n");
-	return mask;
-}
-
-/**
- *	sep_time_address	-	address in SEP memory of time
- *	@sep: SEP device we want the address from
- *
- *	Return the address of the two dwords in memory used for time
- *	setting.
- */
-
-static u32 *sep_time_address(struct sep_device *sep)
-{
-	return sep->shared_addr + SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES;
-}
-
-/**
- *	sep_set_time		-	set the SEP time
- *	@sep: the SEP we are setting the time for
- *
- *	Calculates time and sets it at the predefined address.
- *	Called with the sep mutex held.
- */
-static unsigned long sep_set_time(struct sep_device *sep)
-{
-	struct timeval time;
-	u32 *time_addr;	/* address of time as seen by the kernel */
-
-
-	dbg("sep:sep_set_time start\n");
-
-	do_gettimeofday(&time);
-
-	/* set value in the SYSTEM MEMORY offset */
-	time_addr = sep_time_address(sep);
-
-	time_addr[0] = SEP_TIME_VAL_TOKEN;
-	time_addr[1] = time.tv_sec;
-
-	edbg("SEP Driver:time.tv_sec is %lu\n", time.tv_sec);
-	edbg("SEP Driver:time_addr is %p\n", time_addr);
-	edbg("SEP Driver:sep->shared_addr is %p\n", sep->shared_addr);
-
-	return time.tv_sec;
-}
-
-/**
- *	sep_dump_message	- dump the message that is pending
- *	@sep: sep device
- *
- *	Dump out the message pending in the shared message area
- */
-
-static void sep_dump_message(struct sep_device *sep)
-{
-	int count;
-	for (count = 0; count < 12 * 4; count += 4)
-		edbg("Word %d of the message is %u\n", count, *((u32 *) (sep->shared_addr + count)));
-}
-
-/**
- *	sep_send_command_handler	-	kick off a command
- *	@sep: sep being signalled
- *
- *	This function raises interrupt to SEP that signals that is has a new
- *	command from the host
- */
-
-static void sep_send_command_handler(struct sep_device *sep)
-{
-	dbg("sep:sep_send_command_handler start\n");
-
-	mutex_lock(&sep_mutex);
-	sep_set_time(sep);
-
-	/* FIXME: flush cache */
-	flush_cache_all();
-
-	sep_dump_message(sep);
-	/* update counter */
-	sep->send_ct++;
-	/* send interrupt to SEP */
-	sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x2);
-	dbg("SEP Driver:<-------- sep_send_command_handler end\n");
-	mutex_unlock(&sep_mutex);
-	return;
-}
-
-/**
- *	sep_send_reply_command_handler	-	kick off a command reply
- *	@sep: sep being signalled
- *
- *	This function raises interrupt to SEP that signals that is has a new
- *	command from the host
- */
-
-static void sep_send_reply_command_handler(struct sep_device *sep)
-{
-	dbg("sep:sep_send_reply_command_handler start\n");
-
-	/* flash cache */
-	flush_cache_all();
-
-	sep_dump_message(sep);
-
-	mutex_lock(&sep_mutex);
-	sep->send_ct++;  	/* update counter */
-	/* send the interrupt to SEP */
-	sep_write_reg(sep, HW_HOST_HOST_SEP_GPR2_REG_ADDR, sep->send_ct);
-	/* update both counters */
-	sep->send_ct++;
-	sep->reply_ct++;
-	mutex_unlock(&sep_mutex);
-	dbg("sep: sep_send_reply_command_handler end\n");
-}
-
-/*
-  This function handles the allocate data pool memory request
-  This function returns calculates the bus address of the
-  allocated memory, and the offset of this area from the mapped address.
-  Therefore, the FVOs in user space can calculate the exact virtual
-  address of this allocated memory
-*/
-static int sep_allocate_data_pool_memory_handler(struct sep_device *sep,
-							unsigned long arg)
-{
-	int error;
-	struct sep_driver_alloc_t command_args;
-
-	dbg("SEP Driver:--------> sep_allocate_data_pool_memory_handler start\n");
-
-	error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_alloc_t));
-	if (error) {
-		error = -EFAULT;
-		goto end_function;
-	}
-
-	/* allocate memory */
-	if ((sep->data_pool_bytes_allocated + command_args.num_bytes) > SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) {
-		error = -ENOMEM;
-		goto end_function;
-	}
-
-	/* set the virtual and bus address */
-	command_args.offset = SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + sep->data_pool_bytes_allocated;
-	command_args.phys_address = sep->shared_bus + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + sep->data_pool_bytes_allocated;
-
-	/* write the memory back to the user space */
-	error = copy_to_user((void *) arg, (void *) &command_args, sizeof(struct sep_driver_alloc_t));
-	if (error) {
-		error = -EFAULT;
-		goto end_function;
-	}
-
-	/* set the allocation */
-	sep->data_pool_bytes_allocated += command_args.num_bytes;
-
-end_function:
-	dbg("SEP Driver:<-------- sep_allocate_data_pool_memory_handler end\n");
-	return error;
-}
-
-/*
-  This function  handles write into allocated data pool command
-*/
-static int sep_write_into_data_pool_handler(struct sep_device *sep, unsigned long arg)
-{
-	int error;
-	void *virt_address;
-	unsigned long va;
-	unsigned long app_in_address;
-	unsigned long num_bytes;
-	void *data_pool_area_addr;
-
-	dbg("SEP Driver:--------> sep_write_into_data_pool_handler start\n");
-
-	/* get the application address */
-	error = get_user(app_in_address, &(((struct sep_driver_write_t *) arg)->app_address));
-	if (error)
-		goto end_function;
-
-	/* get the virtual kernel address address */
-	error = get_user(va, &(((struct sep_driver_write_t *) arg)->datapool_address));
-	if (error)
-		goto end_function;
-	virt_address = (void *)va;
-
-	/* get the number of bytes */
-	error = get_user(num_bytes, &(((struct sep_driver_write_t *) arg)->num_bytes));
-	if (error)
-		goto end_function;
-
-	/* calculate the start of the data pool */
-	data_pool_area_addr = sep->shared_addr + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES;
-
-
-	/* check that the range of the virtual kernel address is correct */
-	if (virt_address < data_pool_area_addr || virt_address > (data_pool_area_addr + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES)) {
-		error = -EINVAL;
-		goto end_function;
-	}
-	/* copy the application data */
-	error = copy_from_user(virt_address, (void *) app_in_address, num_bytes);
-	if (error)
-		error = -EFAULT;
-end_function:
-	dbg("SEP Driver:<-------- sep_write_into_data_pool_handler end\n");
-	return error;
-}
-
-/*
-  this function handles the read from data pool command
-*/
-static int sep_read_from_data_pool_handler(struct sep_device *sep, unsigned long arg)
-{
-	int error;
-	/* virtual address of dest application buffer */
-	unsigned long app_out_address;
-	/* virtual address of the data pool */
-	unsigned long va;
-	void *virt_address;
-	unsigned long num_bytes;
-	void *data_pool_area_addr;
-
-	dbg("SEP Driver:--------> sep_read_from_data_pool_handler start\n");
-
-	/* get the application address */
-	error = get_user(app_out_address, &(((struct sep_driver_write_t *) arg)->app_address));
-	if (error)
-		goto end_function;
-
-	/* get the virtual kernel address address */
-	error = get_user(va, &(((struct sep_driver_write_t *) arg)->datapool_address));
-	if (error)
-		goto end_function;
-	virt_address = (void *)va;
-
-	/* get the number of bytes */
-	error = get_user(num_bytes, &(((struct sep_driver_write_t *) arg)->num_bytes));
-	if (error)
-		goto end_function;
-
-	/* calculate the start of the data pool */
-	data_pool_area_addr = sep->shared_addr + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES;
-
-	/* FIXME: These are incomplete all over the driver: what about + len
-	   and when doing that also overflows */
-	/* check that the range of the virtual kernel address is correct */
-	if (virt_address < data_pool_area_addr || virt_address > data_pool_area_addr + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) {
-		error = -EINVAL;
-		goto end_function;
-	}
-
-	/* copy the application data */
-	error = copy_to_user((void *) app_out_address, virt_address, num_bytes);
-	if (error)
-		error = -EFAULT;
-end_function:
-	dbg("SEP Driver:<-------- sep_read_from_data_pool_handler end\n");
-	return error;
-}
-
-/*
-  This function releases all the application virtual buffer physical pages,
-	that were previously locked
-*/
-static int sep_free_dma_pages(struct page **page_array_ptr, unsigned long num_pages, unsigned long dirtyFlag)
-{
-	unsigned long count;
-
-	if (dirtyFlag) {
-		for (count = 0; count < num_pages; count++) {
-			/* the out array was written, therefore the data was changed */
-			if (!PageReserved(page_array_ptr[count]))
-				SetPageDirty(page_array_ptr[count]);
-			page_cache_release(page_array_ptr[count]);
-		}
-	} else {
-		/* free in pages - the data was only read, therefore no update was done
-		   on those pages */
-		for (count = 0; count < num_pages; count++)
-			page_cache_release(page_array_ptr[count]);
-	}
-
-	if (page_array_ptr)
-		/* free the array */
-		kfree(page_array_ptr);
-
-	return 0;
-}
-
-/*
-  This function locks all the physical pages of the kernel virtual buffer
-  and construct a basic lli  array, where each entry holds the physical
-  page address and the size that application data holds in this physical pages
-*/
-static int sep_lock_kernel_pages(struct sep_device *sep,
-				 unsigned long kernel_virt_addr,
-				 unsigned long data_size,
-				 unsigned long *num_pages_ptr,
-				 struct sep_lli_entry_t **lli_array_ptr,
-				 struct page ***page_array_ptr)
-{
-	int error = 0;
-	/* the the page of the end address of the user space buffer */
-	unsigned long end_page;
-	/* the page of the start address of the user space buffer */
-	unsigned long start_page;
-	/* the range in pages */
-	unsigned long num_pages;
-	struct sep_lli_entry_t *lli_array;
-	/* next kernel address to map */
-	unsigned long next_kernel_address;
-	unsigned long count;
-
-	dbg("SEP Driver:--------> sep_lock_kernel_pages start\n");
-
-	/* set start and end pages  and num pages */
-	end_page = (kernel_virt_addr + data_size - 1) >> PAGE_SHIFT;
-	start_page = kernel_virt_addr >> PAGE_SHIFT;
-	num_pages = end_page - start_page + 1;
-
-	edbg("SEP Driver: kernel_virt_addr is %08lx\n", kernel_virt_addr);
-	edbg("SEP Driver: data_size is %lu\n", data_size);
-	edbg("SEP Driver: start_page is %lx\n", start_page);
-	edbg("SEP Driver: end_page is %lx\n", end_page);
-	edbg("SEP Driver: num_pages is %lu\n", num_pages);
-
-	lli_array = kmalloc(sizeof(struct sep_lli_entry_t) * num_pages, GFP_ATOMIC);
-	if (!lli_array) {
-		edbg("SEP Driver: kmalloc for lli_array failed\n");
-		error = -ENOMEM;
-		goto end_function;
-	}
-
-	/* set the start address of the first page - app data may start not at
-	   the beginning of the page */
-	lli_array[0].physical_address = (unsigned long) virt_to_phys((unsigned long *) kernel_virt_addr);
-
-	/* check that not all the data is in the first page only */
-	if ((PAGE_SIZE - (kernel_virt_addr & (~PAGE_MASK))) >= data_size)
-		lli_array[0].block_size = data_size;
-	else
-		lli_array[0].block_size = PAGE_SIZE - (kernel_virt_addr & (~PAGE_MASK));
-
-	/* debug print */
-	dbg("lli_array[0].physical_address is %08lx, lli_array[0].block_size is %lu\n", lli_array[0].physical_address, lli_array[0].block_size);
-
-	/* advance the address to the start of the next page */
-	next_kernel_address = (kernel_virt_addr & PAGE_MASK) + PAGE_SIZE;
-
-	/* go from the second page to the prev before last */
-	for (count = 1; count < (num_pages - 1); count++) {
-		lli_array[count].physical_address = (unsigned long) virt_to_phys((unsigned long *) next_kernel_address);
-		lli_array[count].block_size = PAGE_SIZE;
-
-		edbg("lli_array[%lu].physical_address is %08lx, lli_array[%lu].block_size is %lu\n", count, lli_array[count].physical_address, count, lli_array[count].block_size);
-		next_kernel_address += PAGE_SIZE;
-	}
-
-	/* if more then 1 pages locked - then update for the last page size needed */
-	if (num_pages > 1) {
-		/* update the address of the last page */
-		lli_array[count].physical_address = (unsigned long) virt_to_phys((unsigned long *) next_kernel_address);
-
-		/* set the size of the last page */
-		lli_array[count].block_size = (kernel_virt_addr + data_size) & (~PAGE_MASK);
-
-		if (lli_array[count].block_size == 0) {
-			dbg("app_virt_addr is %08lx\n", kernel_virt_addr);
-			dbg("data_size is %lu\n", data_size);
-			while (1);
-		}
-
-		edbg("lli_array[%lu].physical_address is %08lx, lli_array[%lu].block_size is %lu\n", count, lli_array[count].physical_address, count, lli_array[count].block_size);
-	}
-	/* set output params */
-	*lli_array_ptr = lli_array;