Staging: add the go7007 video driver

Todo:
	- checkpatch.pl cleanups
	- sparse cleanups
	- lots of little modules, should be merged together
	  and added to the build.
	- testing?
	- handle churn in v4l layer.

Many thanks to Ross Cohen <rcohen@snurgle.org> for cleanup patches on
this driver.

Cc: Ross Cohen <rcohen@snurgle.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

22 files changed, 9269 insertions, 0 deletions

diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 56c73bcf477..f16bc9cdaf3 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -31,4 +31,6 @@ source "drivers/staging/sxg/Kconfig"
 
 source "drivers/staging/me4000/Kconfig"
 
+source "drivers/staging/go7007/Kconfig"
+
 endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 97df19be52d..aa61662e632 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_ET131X)		+= et131x/
 obj-$(CONFIG_SLICOSS)		+= slicoss/
 obj-$(CONFIG_SXG)		+= sxg/
 obj-$(CONFIG_ME4000)		+= me4000/
+obj-$(CONFIG_VIDEO_GO7007)	+= go7007/
diff --git a/drivers/staging/go7007/Kconfig b/drivers/staging/go7007/Kconfig
new file mode 100644
index 00000000000..57a121c338c
--- /dev/null
+++ b/drivers/staging/go7007/Kconfig
@@ -0,0 +1,25 @@
+config VIDEO_GO7007
+	tristate "Go 7007 support"
+	depends on VIDEO_DEV && PCI && I2C && INPUT
+	select VIDEOBUF_DMA_SG
+	select VIDEO_IR
+	select VIDEO_TUNER
+	select VIDEO_TVEEPROM
+	select CRC32
+	default N
+	---help---
+	  This is a video4linux driver for some wierd device...
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called go7007
+
+config VIDEO_GO7007_USB
+	tristate "Go 7007 USB support"
+	depends on VIDEO_GO7007 && USB
+	default N
+	---help---
+	  This is a video4linux driver for some wierd device...
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called go7007-usb
+
diff --git a/drivers/staging/go7007/Makefile b/drivers/staging/go7007/Makefile
new file mode 100644
index 00000000000..9b9310cae1c
--- /dev/null
+++ b/drivers/staging/go7007/Makefile
@@ -0,0 +1,18 @@
+#obj-m += go7007.o go7007-usb.o snd-go7007.o wis-saa7115.o wis-tw9903.o \
+		wis-uda1342.o wis-sony-tuner.o wis-saa7113.o wis-ov7640.o \
+		wis-tw2804.o
+
+
+obj-$(CONFIG_VIDEO_GO7007) += go7007.o
+obj-$(CONFIG_VIDEO_GO7007_USB) += go7007-usb.o
+
+go7007-objs += go7007-v4l2.o go7007-driver.o go7007-i2c.o go7007-fw.o snd-go7007.o
+
+
+#ifneq ($(SAA7134_BUILD),)
+#obj-m += saa7134-go7007.o
+#endif
+
+EXTRA_CFLAGS += -Idrivers/staging/saa7134
+EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
+EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
diff --git a/drivers/staging/go7007/README b/drivers/staging/go7007/README
new file mode 100644
index 00000000000..48f44763781
--- /dev/null
+++ b/drivers/staging/go7007/README
@@ -0,0 +1,11 @@
+Todo:
+	- checkpatch.pl cleanups
+	- sparse cleanups
+	- lots of little modules, should be merged together
+	  and added to the build.
+	- testing?
+	- handle churn in v4l layer.
+
+Please send patchs to Greg Kroah-Hartman <greg@kroah.com> and Cc: Ross
+Cohen <rcohen@snurgle.org> as well.
+
diff --git a/drivers/staging/go7007/go7007-driver.c b/drivers/staging/go7007/go7007-driver.c
new file mode 100644
index 00000000000..5a336ff2d9b
--- /dev/null
+++ b/drivers/staging/go7007/go7007-driver.c
@@ -0,0 +1,688 @@
+/*
+ * Copyright (C) 2005-2006 Micronas USA Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/unistd.h>
+#include <linux/time.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/firmware.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <asm/system.h>
+#include <linux/videodev.h>
+#include <media/tuner.h>
+#include <media/v4l2-common.h>
+
+#include "go7007-priv.h"
+#include "wis-i2c.h"
+
+/*
+ * Wait for an interrupt to be delivered from the GO7007SB and return
+ * the associated value and data.
+ *
+ * Must be called with the hw_lock held.
+ */
+int go7007_read_interrupt(struct go7007 *go, u16 *value, u16 *data)
+{
+	go->interrupt_available = 0;
+	go->hpi_ops->read_interrupt(go);
+	if (wait_event_timeout(go->interrupt_waitq,
+				go->interrupt_available, 5*HZ) < 0) {
+		printk(KERN_ERR "go7007: timeout waiting for read interrupt\n");
+		return -1;
+	}
+	if (!go->interrupt_available)
+		return -1;
+	go->interrupt_available = 0;
+	*value = go->interrupt_value & 0xfffe;
+	*data = go->interrupt_data;
+	return 0;
+}
+EXPORT_SYMBOL(go7007_read_interrupt);
+
+/*
+ * Read a register/address on the GO7007SB.
+ *
+ * Must be called with the hw_lock held.
+ */
+int go7007_read_addr(struct go7007 *go, u16 addr, u16 *data)
+{
+	int count = 100;
+	u16 value;
+
+	if (go7007_write_interrupt(go, 0x0010, addr) < 0)
+		return -EIO;
+	while (count-- > 0) {
+		if (go7007_read_interrupt(go, &value, data) == 0 &&
+				value == 0xa000)
+			return 0;
+	}
+	return -EIO;
+}
+EXPORT_SYMBOL(go7007_read_addr);
+
+/*
+ * Send the boot firmware to the encoder, which just wakes it up and lets
+ * us talk to the GPIO pins and on-board I2C adapter.
+ *
+ * Must be called with the hw_lock held.
+ */
+static int go7007_load_encoder(struct go7007 *go)
+{
+	const struct firmware *fw_entry;
+	char fw_name[] = "go7007fw.bin";
+	void *bounce;
+	int fw_len, rv = 0;
+	u16 intr_val, intr_data;
+
+	if (request_firmware(&fw_entry, fw_name, go->dev)) {
+		printk(KERN_ERR
+			"go7007: unable to load firmware from file \"%s\"\n",
+			fw_name);
+		return -1;
+	}
+	if (fw_entry->size < 16 || memcmp(fw_entry->data, "WISGO7007FW", 11)) {
+		printk(KERN_ERR "go7007: file \"%s\" does not appear to be "
+				"go7007 firmware\n", fw_name);
+		release_firmware(fw_entry);
+		return -1;
+	}
+	fw_len = fw_entry->size - 16;
+	bounce = kmalloc(fw_len, GFP_KERNEL);
+	if (bounce == NULL) {
+		printk(KERN_ERR "go7007: unable to allocate %d bytes for "
+				"firmware transfer\n", fw_len);
+		release_firmware(fw_entry);
+		return -1;
+	}
+	memcpy(bounce, fw_entry->data + 16, fw_len);
+	release_firmware(fw_entry);
+	if (go7007_interface_reset(go) < 0 ||
+			go7007_send_firmware(go, bounce, fw_len) < 0 ||
+			go7007_read_interrupt(go, &intr_val, &intr_data) < 0 ||
+			(intr_val & ~0x1) != 0x5a5a) {
+		printk(KERN_ERR "go7007: error transferring firmware\n");
+		rv = -1;
+	}
+	kfree(bounce);
+	return rv;
+}
+
+/*
+ * Boot the encoder and register the I2C adapter if requested.  Do the
+ * minimum initialization necessary, since the board-specific code may
+ * still need to probe the board ID.
+ *
+ * Must NOT be called with the hw_lock held.
+ */
+int go7007_boot_encoder(struct go7007 *go, int init_i2c)
+{
+	int ret;
+
+	down(&go->hw_lock);
+	ret = go7007_load_encoder(go);
+	up(&go->hw_lock);
+	if (ret < 0)
+		return -1;
+	if (!init_i2c)
+		return 0;
+	if (go7007_i2c_init(go) < 0)
+		return -1;
+	go->i2c_adapter_online = 1;
+	return 0;
+}
+EXPORT_SYMBOL(go7007_boot_encoder);
+
+/*
+ * Configure any hardware-related registers in the GO7007, such as GPIO
+ * pins and bus parameters, which are board-specific.  This assumes
+ * the boot firmware has already been downloaded.
+ *
+ * Must be called with the hw_lock held.
+ */
+static int go7007_init_encoder(struct go7007 *go)
+{
+	if (go->board_info->audio_flags & GO7007_AUDIO_I2S_MASTER) {
+		go7007_write_addr(go, 0x1000, 0x0811);
+		go7007_write_addr(go, 0x1000, 0x0c11);
+	}
+	if (go->board_id == GO7007_BOARDID_MATRIX_REV) {
+		/* Set GPIO pin 0 to be an output (audio clock control) */
+		go7007_write_addr(go, 0x3c82, 0x0001);
+		go7007_write_addr(go, 0x3c80, 0x00fe);
+	}
+	return 0;
+}
+
+/*
+ * Send the boot firmware to the GO7007 and configure the registers.  This
+ * is the only way to stop the encoder once it has started streaming video.
+ *
+ * Must be called with the hw_lock held.
+ */
+int go7007_reset_encoder(struct go7007 *go)
+{
+	if (go7007_load_encoder(go) < 0)
+		return -1;
+	return go7007_init_encoder(go);
+}
+
+/*
+ * Attempt to instantiate an I2C client by ID, probably loading a module.
+ */
+static int init_i2c_module(struct i2c_adapter *adapter, int id, int addr)
+{
+	char *modname;
+
+	switch (id) {
+	case I2C_DRIVERID_WIS_SAA7115:
+		modname = "wis-saa7115";
+		break;
+	case I2C_DRIVERID_WIS_SAA7113:
+		modname = "wis-saa7113";
+		break;
+	case I2C_DRIVERID_WIS_UDA1342:
+		modname = "wis-uda1342";
+		break;
+	case I2C_DRIVERID_WIS_SONY_TUNER:
+		modname = "wis-sony-tuner";
+		break;
+	case I2C_DRIVERID_WIS_TW9903:
+		modname = "wis-tw9903";
+		break;
+	case I2C_DRIVERID_WIS_TW2804:
+		modname = "wis-tw2804";
+		break;
+	case I2C_DRIVERID_WIS_OV7640:
+		modname = "wis-ov7640";
+		break;
+	default:
+		modname = NULL;
+		break;
+	}
+	if (modname != NULL)
+		request_module(modname);
+	if (wis_i2c_probe_device(adapter, id, addr) == 1)
+		return 0;
+	if (modname != NULL)
+		printk(KERN_INFO
+			"go7007: probing for module %s failed", modname);
+	else
+		printk(KERN_INFO
+			"go7007: sensor %u seems to be unsupported!\n", id);
+	return -1;
+}
+
+/*
+ * Finalize the GO7007 hardware setup, register the on-board I2C adapter
+ * (if used on this board), load the I2C client driver for the sensor
+ * (SAA7115 or whatever) and other devices, and register the ALSA and V4L2
+ * interfaces.
+ *
+ * Must NOT be called with the hw_lock held.
+ */
+int go7007_register_encoder(struct go7007 *go)
+{
+	int i, ret;
+
+	printk(KERN_INFO "go7007: registering new %s\n", go->name);
+
+	down(&go->hw_lock);
+	ret = go7007_init_encoder(go);
+	up(&go->hw_lock);
+	if (ret < 0)
+		return -1;
+
+	if (!go->i2c_adapter_online &&
+			go->board_info->flags & GO7007_BOARD_USE_ONBOARD_I2C) {
+		if (go7007_i2c_init(go) < 0)
+			return -1;
+		go->i2c_adapter_online = 1;
+	}
+	if (go->i2c_adapter_online) {
+		for (i = 0; i < go->board_info->num_i2c_devs; ++i)
+			init_i2c_module(&go->i2c_adapter,
+					go->board_info->i2c_devs[i].id,
+					go->board_info->i2c_devs[i].addr);
+#ifdef TUNER_SET_TYPE_ADDR
+		if (go->tuner_type >= 0) {
+			struct tuner_setup tun_setup = {
+				.mode_mask	= T_ANALOG_TV,
+				.addr		= ADDR_UNSET,
+				.type		= go->tuner_type
+			};
+			i2c_clients_command(&go->i2c_adapter,
+				TUNER_SET_TYPE_ADDR, &tun_setup);
+		}
+#else
+		if (go->tuner_type >= 0)
+			i2c_clients_command(&go->i2c_adapter,
+				TUNER_SET_TYPE, &go->tuner_type);
+#endif
+		if (go->board_id == GO7007_BOARDID_ADLINK_MPG24)
+			i2c_clients_command(&go->i2c_adapter,
+				DECODER_SET_CHANNEL, &go->channel_number);
+	}
+	if (go->board_info->flags & GO7007_BOARD_HAS_AUDIO) {
+		go->audio_enabled = 1;
+		go7007_snd_init(go);
+	}
+	return go7007_v4l2_init(go);
+}
+EXPORT_SYMBOL(go7007_register_encoder);
+
+/*
+ * Send the encode firmware to the encoder, which will cause it
+ * to immediately start delivering the video and audio streams.
+ *
+ * Must be called with the hw_lock held.
+ */
+int go7007_start_encoder(struct go7007 *go)
+{
+	u8 *fw;
+	int fw_len, rv = 0, i;
+	u16 intr_val, intr_data;
+
+	go->modet_enable = 0;
+	if (!go->dvd_mode)
+		for (i = 0; i < 4; ++i) {
+			if (go->modet[i].enable) {
+				go->modet_enable = 1;
+				continue;
+			}
+			go->modet[i].pixel_threshold = 32767;
+			go->modet[i].motion_threshold = 32767;
+			go->modet[i].mb_threshold = 32767;
+		}
+
+	if (go7007_construct_fw_image(go, &fw, &fw_len) < 0)
+		return -1;
+
+	if (go7007_send_firmware(go, fw, fw_len) < 0 ||
+			go7007_read_interrupt(go, &intr_val, &intr_data) < 0) {
+		printk(KERN_ERR "go7007: error transferring firmware\n");
+		rv = -1;
+		goto start_error;
+	}
+
+	go->state = STATE_DATA;
+	go->parse_length = 0;
+	go->seen_frame = 0;
+	if (go7007_stream_start(go) < 0) {
+		printk(KERN_ERR "go7007: error starting stream transfer\n");
+		rv = -1;
+		goto start_error;
+	}
+
+start_error:
+	kfree(fw);
+	return rv;
+}
+
+/*
+ * Store a byte in the current video buffer, if there is one.
+ */
+static inline void store_byte(struct go7007_buffer *gobuf, u8 byte)
+{
+	if (gobuf != NULL && gobuf->bytesused < GO7007_BUF_SIZE) {
+		unsigned int pgidx = gobuf->offset >> PAGE_SHIFT;
+		unsigned int pgoff = gobuf->offset & ~PAGE_MASK;
+
+		*((u8 *)page_address(gobuf->pages[pgidx]) + pgoff) = byte;
+		++gobuf->offset;
+		++gobuf->bytesused;
+	}
+}
+
+/*
+ * Deliver the last video buffer and get a new one to start writing to.
+ */
+static void frame_boundary(struct go7007 *go)
+{
+	struct go7007_buffer *gobuf;
+	int i;
+
+	if (go->active_buf) {
+		if (go->active_buf->modet_active) {
+			if (go->active_buf->bytesused + 216 < GO7007_BUF_SIZE) {
+				for (i = 0; i < 216; ++i)
+					store_byte(go->active_buf,
+							go->active_map[i]);
+				go->active_buf->bytesused -= 216;
+			} else
+				go->active_buf->modet_active = 0;
+		}
+		go->active_buf->state = BUF_STATE_DONE;
+		wake_up_interruptible(&go->frame_waitq);
+		go->active_buf = NULL;
+	}
+	list_for_each_entry(gobuf, &go->stream, stream)
+		if (gobuf->state == BUF_STATE_QUEUED) {
+			gobuf->seq = go->next_seq;
+			do_gettimeofday(&gobuf->timestamp);
+			go->active_buf = gobuf;
+			break;
+		}
+	++go->next_seq;
+}
+
+static void write_bitmap_word(struct go7007 *go)
+{
+	int x, y, i, stride = ((go->width >> 4) + 7) >> 3;
+
+	for (i = 0; i < 16; ++i) {
+		y = (((go->parse_length - 1) << 3) + i) / (go->width >> 4);
+		x = (((go->parse_length - 1) << 3) + i) % (go->width >> 4);
+		go->active_map[stride * y + (x >> 3)] |=
+					(go->modet_word & 1) << (x & 0x7);
+		go->modet_word >>= 1;
+	}
+}
+
+/*
+ * Parse a chunk of the video stream into frames.  The frames are not
+ * delimited by the hardware, so we have to parse the frame boundaries
+ * based on the type of video stream we're receiving.
+ */
+void go7007_parse_video_stream(struct go7007 *go, u8 *buf, int length)
+{
+	int i, seq_start_code = -1, frame_start_code = -1;
+
+	spin_lock(&go->spinlock);
+
+	switch (go->format) {
+	case GO7007_FORMAT_MPEG4:
+		seq_start_code = 0xB0;
+		frame_start_code = 0xB6;
+		break;
+	case GO7007_FORMAT_MPEG1:
+	case GO7007_FORMAT_MPEG2:
+		seq_start_code = 0xB3;
+		frame_start_code = 0x00;
+		break;
+	}
+
+	for (i = 0; i < length; ++i) {
+		if (go->active_buf != NULL &&
+			    go->active_buf->bytesused >= GO7007_BUF_SIZE - 3) {
+			printk(KERN_DEBUG "go7007: dropping oversized frame\n");
+			go->active_buf->offset -= go->active_buf->bytesused;
+			go->active_buf->bytesused = 0;
+			go->active_buf->modet_active = 0;
+			go->active_buf = NULL;
+		}
+
+		switch (go->state) {
+		case STATE_DATA:
+			switch (buf[i]) {
+			case 0x00:
+				go->state = STATE_00;
+				break;
+			case 0xFF:
+				go->state = STATE_FF;
+				break;
+			default:
+				store_byte(go->active_buf, buf[i]);
+				break;
+			}
+			break;
+		case STATE_00:
+			switch (buf[i]) {
+			case 0x00:
+				go->state = STATE_00_00;
+				break;
+			case 0xFF:
+				store_byte(go->active_buf, 0x00);
+				go->state = STATE_FF;
+				break;
+			default:
+				store_byte(go->active_buf, 0x00);
+				store_byte(go->active_buf, buf[i]);
+				go->state = STATE_DATA;
+				break;
+			}
+			break;
+		case STATE_00_00:
+			switch (buf[i]) {
+			case 0x00:
+				store_byte(go->active_buf, 0x00);
+				/* go->state remains STATE_00_00 */
+				break;
+			case 0x01:
+				go->state = STATE_00_00_01;
+				break;
+			case 0xFF:
+				store_byte(go->active_buf, 0x00);
+				store_byte(go->active_buf, 0x00);
+				go->state = STATE_FF;
+				break;
+			default:
+				store_byte(go->active_buf, 0x00);
+				store_byte(go->active_buf, 0x00);
+				store_byte(go->active_buf, buf[i]);
+				go->state = STATE_DATA;
+				break;
+			}
+			break;
+		case STATE_00_00_01:
+			/* If this is the start of a new MPEG frame,
+			 * get a new buffer */
+			if ((go->format == GO7007_FORMAT_MPEG1 ||
+					go->format == GO7007_FORMAT_MPEG2 ||
+					go->format == GO7007_FORMAT_MPEG4) &&
+					(buf[i] == seq_start_code ||
+						buf[i] == 0xB8 || /* GOP code */
+						buf[i] == frame_start_code)) {
+				if (go->active_buf == NULL || go->seen_frame)
+					frame_boundary(go);
+				if (buf[i] == frame_start_code) {
+					if (go->active_buf != NULL)
+						go->active_buf->frame_offset =
+							go->active_buf->offset;
+					go->seen_frame = 1;
+				} else {
+					go->seen_frame = 0;
+				}
+			}
+			/* Handle any special chunk types, or just write the
+			 * start code to the (potentially new) buffer */
+			switch (buf[i]) {
+			case 0xF5: /* timestamp */
+				go->parse_length = 12;
+				go->state = STATE_UNPARSED;
+				break;
+			case 0xF6: /* vbi */
+				go->state = STATE_VBI_LEN_A;
+				break;
+			case 0xF8: /* MD map */
+				go->parse_length = 0;
+				memset(go->active_map, 0,
+						sizeof(go->active_map));
+				go->state = STATE_MODET_MAP;
+				break;
+			case 0xFF: /* Potential JPEG start code */
+				store_byte(go->active_buf, 0x00);
+				store_byte(go->active_buf, 0x00);
+				store_byte(go->active_buf, 0x01);
+				go->state = STATE_FF;
+				break;
+			default:
+				store_byte(go->active_buf, 0x00);
+				store_byte(go->active_buf, 0x00);
+				store_byte(go->active_buf, 0x01);
+				store_byte(go->active_buf, buf[i]);
+				go->state = STATE_DATA;
+				break;
+			}
+			break;
+		case STATE_FF:
+			switch (buf[i]) {
+			case 0x00:
+				store_byte(go->active_buf, 0xFF);
+				go->state = STATE_00;
+				break;
+			case 0xFF:
+				store_byte(go->active_buf, 0xFF);
+				/* go->state remains STATE_FF */
+				break;
+			case 0xD8:
+				if (go->format == GO7007_FORMAT_MJPEG)
+					frame_boundary(go);
+				/* fall through */
+			default:
+				store_byte(go->active_buf, 0xFF);
+				store_byte(go->active_buf, buf[i]);
+				go->state = STATE_DATA;
+				break;
+			}
+			break;
+		case STATE_VBI_LEN_A:
+			go->parse_length = buf[i] << 8;
+			go->state = STATE_VBI_LEN_B;
+			break;
+		case STATE_VBI_LEN_B:
+			go->parse_length |= buf[i];
+			if (go->parse_length > 0)
+				go->state = STATE_UNPARSED;
+			else
+				go->state = STATE_DATA;
+			break;
+		case STATE_MODET_MAP:
+			if (go->parse_length < 204) {
+				if (go->parse_length & 1) {
+					go->modet_word |= buf[i];
+					write_bitmap_word(go);
+				} else
+					go->modet_word = buf[i] << 8;
+			} else if (go->parse_length == 207 && go->active_buf) {
+				go->active_buf->modet_active = buf[i];
+			}
+			if (++go->parse_length == 208)
+				go->state = STATE_DATA;
+			break;
+		case STATE_UNPARSED:
+			if (--go->parse_length == 0)
+				go->state = STATE_DATA;
+			break;
+		}
+	}
+
+	spin_unlock(&go->spinlock);
+}
+EXPORT_SYMBOL(go7007_parse_video_stream);
+
+/*
+ * Allocate a new go7007 struct.  Used by the hardware-specific probe.
+ */
+struct go7007 *go7007_alloc(struct go7007_board_info *board, struct device *dev)
+{
+	struct go7007 *go;
+	int i;
+
+	go = kmalloc(sizeof(struct go7007), GFP_KERNEL);
+	if (go == NULL)
+		return NULL;
+	go->dev = dev;
+	go->board_info = board;
+	go->board_id = 0;
+	go->tuner_type = -1;
+	go->channel_number = 0;
+	go->name[0] = 0;
+	init_MUTEX(&go->hw_lock);
+	init_waitqueue_head(&go->frame_waitq);
+	spin_lock_init(&go->spinlock);
+	go->video_dev = NULL;
+	go->ref_count = 0;
+	go->status = STATUS_INIT;
+	memset(&go->i2c_adapter, 0, sizeof(go->i2c_adapter));
+	go->i2c_adapter_online = 0;
+	go->interrupt_available = 0;
+	init_waitqueue_head(&go->interrupt_waitq);
+	go->in_use = 0;
+	go->input = 0;
+	if (board->sensor_flags & GO7007_SENSOR_TV) {
+		go->standard = GO7007_STD_NTSC;
+		go->width = 720;
+		go->height = 480;
+		go->sensor_framerate = 30000;
+	} else {
+		go->standard = GO7007_STD_OTHER;
+		go->width = board->sensor_width;
+		go->height = board->sensor_height;
+		go->sensor_framerate = board->sensor_framerate;
+	}
+	go->encoder_v_offset = board->sensor_v_offset;
+	go->encoder_h_offset = board->sensor_h_offset;
+	go->encoder_h_halve = 0;
+	go->encoder_v_halve = 0;
+	go->encoder_subsample = 0;
+	go->streaming = 0;
+	go->format = GO7007_FORMAT_MJPEG;
+	go->bitrate = 1500000;
+	go->fps_scale = 1;
+	go->pali = 0;
+	go->aspect_ratio = GO7007_RATIO_1_1;
+	go->gop_size = 0;
+	go->ipb = 0;
+	go->closed_gop = 0;
+	go->repeat_seqhead = 0;
+	go->seq_header_enable = 0;
+	go->gop_header_enable = 0;
+	go->dvd_mode = 0;
+	go->interlace_coding = 0;
+	for (i = 0; i < 4; ++i)
+		go->modet[i].enable = 0;;
+	for (i = 0; i < 1624; ++i)
+		go->modet_map[i] = 0;
+	go->audio_deliver = NULL;
+	go->audio_enabled = 0;
+	INIT_LIST_HEAD(&go->stream);
+
+	return go;
+}
+EXPORT_SYMBOL(go7007_alloc);
+
+/*
+ * Detach and unregister the encoder.  The go7007 struct won't be freed
+ * until v4l2 finishes releasing its resources and all associated fds are
+ * closed by applications.
+ */
+void go7007_remove(struct go7007 *go)
+{
+	if (go->i2c_adapter_online) {
+		if (i2c_del_adapter(&go->i2c_adapter) == 0)
+			go->i2c_adapter_online = 0;
+		else
+			printk(KERN_ERR
+				"go7007: error removing I2C adapter!\n");
+	}
+
+	if (go->audio_enabled)
+		go7007_snd_remove(go);
+	go7007_v4l2_remove(go);
+}
+EXPORT_SYMBOL(go7007_remove);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/go7007/go7007-fw.c b/drivers/staging/go7007/go7007-fw.c
new file mode 100644
index 00000000000..c2aea1020b0
--- /dev/null
+++ b/drivers/staging/go7007/go7007-fw.c
@@ -0,0 +1,1639 @@
+/*
+ * Copyright (C) 2005-2006 Micronas USA Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+/*
+ * This file contains code to generate a firmware image for the GO7007SB
+ * encoder.  Much of the firmware is read verbatim from a file, but some of
+ * it concerning bitrate control and other things that can be configured at
+ * run-time are generated dynamically.  Note that the format headers
+ * generated here do not affect the functioning of the encoder; they are
+ * merely parroted back to the host at the start of each frame.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/version.h>
+#include <linux/time.h>
+#include <linux/mm.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/firmware.h>
+#include <asm/byteorder.h>
+
+#include "go7007-priv.h"
+
+/* Constants used in the source firmware image to describe code segments */
+
+#define	FLAG_MODE_MJPEG		(1)
+#define	FLAG_MODE_MPEG1		(1<<1)
+#define	FLAG_MODE_MPEG2		(1<<2)
+#define	FLAG_MODE_MPEG4		(1<<3)
+#define	FLAG_MODE_H263		(1<<4)
+#define FLAG_MODE_ALL		(FLAG_MODE_MJPEG | FLAG_MODE_MPEG1 | \
+					FLAG_MODE_MPEG2 | FLAG_MODE_MPEG4 | \
+					FLAG_MODE_H263)
+#define FLAG_SPECIAL		(1<<8)
+
+#define SPECIAL_FRM_HEAD	0
+#define SPECIAL_BRC_CTRL	1
+#define SPECIAL_CONFIG		2
+#define SPECIAL_SEQHEAD		3
+#define SPECIAL_AV_SYNC		4
+#define SPECIAL_FINAL		5
+#define SPECIAL_AUDIO		6
+#define SPECIAL_MODET		7
+
+/* Little data class for creating MPEG headers bit-by-bit */
+
+struct code_gen {
+	unsigned char *p; /* destination */
+	u32 a; /* collects bits at the top of the variable */
+	int b; /* bit position of most recently-written bit */
+	int len; /* written out so far */
+};
+
+#define CODE_GEN(name, dest) struct code_gen name = { dest, 0, 32, 0 }
+
+#define CODE_ADD(name, val, length) do { \
+	name.b -= (length); \
+	name.a |= (val) << name.b; \
+	while (name.b <= 24) { \
+		*name.p = name.a >> 24; \
+		++name.p; \
+		name.a <<= 8; \
+		name.b += 8; \
+		name.len += 8; \
+	} \
+} while (0)
+
+#define CODE_LENGTH(name) (name.len + (32 - name.b))
+
+/* Tables for creating the bitrate control data */
+
+static const s16 converge_speed_ip[101] = {
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 2,
+	2, 2, 2, 2, 2, 2, 2, 2, 2, 3,
+	3, 3, 3, 3, 3, 4, 4, 4, 4, 4,
+	5, 5, 5, 6, 6, 6, 7, 7, 8, 8,
+	9, 10, 10, 11, 12, 13, 14, 15, 16, 17,
+	19, 20, 22, 23, 25, 27, 30, 32, 35, 38,
+	41, 45, 49, 53, 58, 63, 69, 76, 83, 91,
+	100
+};
+
+static const s16 converge_speed_ipb[101] = {
+	3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
+	3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
+	3, 3, 3, 3, 3, 4, 4, 4, 4, 4,
+	4, 4, 4, 4, 5, 5, 5, 5, 5, 6,
+	6, 6, 6, 7, 7, 7, 7, 8, 8, 9,
+	9, 9, 10, 10, 11, 12, 12, 13, 14, 14,
+	15, 16, 17, 18, 19, 20, 22, 23, 25, 26,
+	28, 30, 32, 34, 37, 40, 42, 46, 49, 53,
+	57, 61, 66, 71, 77, 83, 90, 97, 106, 115,
+	125, 135, 147, 161, 175, 191, 209, 228, 249, 273,
+	300
+};
+
+static const s16 LAMBDA_table[4][101] = {
+	{	16, 16, 16, 16, 17, 17, 17, 18, 18, 18,
+		19, 19, 19, 20, 20, 20, 21, 21, 22, 22,
+		22, 23, 23, 24, 24, 25, 25, 25, 26, 26,
+		27, 27, 28, 28, 29, 29, 30, 31, 31, 32,
+		32, 33, 33, 34, 35, 35, 36, 37, 37, 38,
+		39, 39, 40, 41, 42, 42, 43, 44, 45, 46,
+		46, 47, 48, 49, 50, 51, 52, 53, 54, 55,
+		56, 57, 58, 59, 60, 61, 62, 63, 64, 65,
+		67, 68, 69, 70, 72, 73, 74, 76, 77, 78,
+		80, 81, 83, 84, 86, 87, 89, 90, 92, 94,
+		96
+	},
+	{
+		20, 20, 20, 21, 21, 21, 22, 22, 23, 23,
+		23, 24, 24, 25, 25, 26, 26, 27, 27, 28,
+		28, 29, 29, 30, 30, 31, 31, 32, 33, 33,
+		34, 34, 35, 36, 36, 37, 38, 38, 39, 40,
+		40, 41, 42, 43, 43, 44, 45, 46, 47, 48,
+		48, 49, 50, 51, 52, 53, 54, 55, 56, 57,
+		58, 59, 60, 61, 62, 64, 65, 66, 67, 68,
+		70, 71, 72, 73, 75, 76, 78, 79, 80, 82,
+		83, 85, 86, 88, 90, 91, 93, 95, 96, 98,
+		100, 102, 103, 105, 107, 109, 111, 113, 115, 117,
+		120
+	},
+	{
+		24, 24, 24, 25, 25, 26, 26, 27, 27, 28,
+		28, 29, 29, 30, 30, 31, 31, 32, 33, 33,
+		34, 34, 35, 36, 36, 37, 38, 38, 39, 40,
+		41, 41, 42, 43, 44, 44, 45, 46, 47, 48,
+		49, 50, 50, 51, 52, 53, 54, 55, 56, 57,
+		58, 59, 60, 62, 63, 64, 65, 66, 67, 69,
+		70, 71, 72, 74, 75, 76, 78, 79, 81, 82,
+		84, 85, 87, 88, 90, 92, 93, 95, 97, 98,
+		100, 102, 104, 106, 108, 110, 112, 114, 116, 118,
+		120, 122, 124, 127, 129, 131, 134, 136, 138, 141,
+		144
+	},
+	{
+		32, 32, 33, 33, 34, 34, 35, 36, 36, 37,
+		38, 38, 39, 40, 41, 41, 42, 43, 44, 44,
+		45, 46, 47, 48, 49, 50, 50, 51, 52, 53,
+		54, 55, 56, 57, 58, 59, 60, 62, 63, 64,
+		65, 66, 67, 69, 70, 71, 72, 74, 75, 76,
+		78,