Staging: fix assorted typos all over the place

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

63 files changed, 118 insertions, 118 deletions

diff --git a/drivers/staging/altpciechdma/altpciechdma.c b/drivers/staging/altpciechdma/altpciechdma.c
index e0c5ba4b4c2..2f07dd4563a 100644
--- a/drivers/staging/altpciechdma/altpciechdma.c
+++ b/drivers/staging/altpciechdma/altpciechdma.c
@@ -212,7 +212,7 @@ struct ape_dev {
 	int msi_enabled;
 	/* whether this driver could obtain the regions */
 	int got_regions;
-	/* irq line succesfully requested by this driver, -1 otherwise */
+	/* irq line successfully requested by this driver, -1 otherwise */
 	int irq_line;
 	/* board revision */
 	u8 revision;
@@ -336,7 +336,7 @@ static int __devinit map_bars(struct ape_dev *ape, struct pci_dev *dev)
 		printk(KERN_DEBUG "BAR[%d] mapped at 0x%p with length %lu(/%lu).\n", i,
 		ape->bar[i], bar_min_len[i], bar_length);
 	}
-	/* succesfully mapped all required BAR regions */
+	/* successfully mapped all required BAR regions */
 	rc = 0;
 	goto success;
 fail:
@@ -911,7 +911,7 @@ static int __devinit probe(struct pci_dev *dev, const struct pci_device_id *id)
 	/* perform DMA engines loop back test */
 	rc = dma_test(ape, dev);
 	(void)rc;
-	/* succesfully took the device */
+	/* successfully took the device */
 	rc = 0;
 	printk(KERN_DEBUG "probe() successful.\n");
 	goto end;
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c
index 6c092efee7b..a15c952c0fa 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c
@@ -3807,7 +3807,7 @@ int i_APCI1710_EnableFrequencyMeasurement(struct comedi_device *dev,
 			s_ModuleInfo[b_ModulNbr].
 			s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) {
 	      /********************************************/
-			/* Test if frequency mesurement initialised */
+			/* Test if frequency measurement initialised */
 	      /********************************************/
 
 			if (devpriv->
@@ -3953,7 +3953,7 @@ int i_APCI1710_DisableFrequencyMeasurement(struct comedi_device *dev, unsigned c
 			s_ModuleInfo[b_ModulNbr].
 			s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) {
 	      /********************************************/
-			/* Test if frequency mesurement initialised */
+			/* Test if frequency measurement initialised */
 	      /********************************************/
 
 			if (devpriv->
@@ -5166,7 +5166,7 @@ int i_APCI1710_ReadFrequencyMeasurement(struct comedi_device *dev,
 			s_ModuleInfo[b_ModulNbr].
 			s_SiemensCounterInfo.s_InitFlag.b_CounterInit == 1) {
 	      /********************************************/
-			/* Test if frequency mesurement initialised */
+			/* Test if frequency measurement initialised */
 	      /********************************************/
 
 			if (devpriv->
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c
index 43198aafb2d..7e125447579 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c
@@ -1808,7 +1808,7 @@ int i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(struct comedi_device
 									2) {
 									if (dw_Status & 4) {
 				/************************/
-										/* Tor counter owerflow */
+										/* Tor counter overflow */
 				/************************/
 
 										*pb_TorCounterStatus
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.h b/drivers/staging/comedi/drivers/addi-data/addi_common.h
index edd657b902a..3ab27cf0fac 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.h
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.h
@@ -82,7 +82,7 @@ struct addi_board {
 
 	int i_NbrDiChannel;	/*  Number of DI channels */
 	int i_NbrDoChannel;	/*  Number of DO channels */
-	int i_DoMaxdata;	/*  data to set all chanels high */
+	int i_DoMaxdata;	/*  data to set all channels high */
 
 	int i_NbrTTLChannel;	/*  Number of TTL channels */
 	const struct comedi_lrange *pr_TTLRangelist;	/* rangelist for TTL */
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
index 222b5499dc0..172fba8dbfe 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
@@ -1468,7 +1468,7 @@ void v_APCI3120_Interrupt(int irq, void *d)
 	int_amcc = inl(devpriv->i_IobaseAmcc + AMCC_OP_REG_INTCSR);	/*  get AMCC int register */
 
 	if ((!int_daq) && (!(int_amcc & ANY_S593X_INT))) {
-		comedi_error(dev, "IRQ from unknow source");
+		comedi_error(dev, "IRQ from unknown source");
 		return;
 	}
 
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c
index ef21f03fc96..7b38d177394 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c
@@ -724,7 +724,7 @@ void v_APCI3501_Interrupt(int irq, void *d)
 		APCI3501_TCW_IRQ) & 0x1;
 
 	if ((!ui_Timer_AOWatchdog)) {
-		comedi_error(dev, "IRQ from unknow source");
+		comedi_error(dev, "IRQ from unknown source");
 		return;
 	}
 
diff --git a/drivers/staging/comedi/drivers/cb_pcidio.c b/drivers/staging/comedi/drivers/cb_pcidio.c
index 09e6e3bdfb3..7daad0a17fb 100644
--- a/drivers/staging/comedi/drivers/cb_pcidio.c
+++ b/drivers/staging/comedi/drivers/cb_pcidio.c
@@ -109,12 +109,12 @@ MODULE_DEVICE_TABLE(pci, pcidio_pci_table);
    several hardware drivers keep similar information in this structure,
    feel free to suggest moving the variable to the struct comedi_device struct.  */
 struct pcidio_private {
-	int data;		/*  curently unused */
+	int data;		/*  currently unused */
 
 	/* would be useful for a PCI device */
 	struct pci_dev *pci_dev;
 
-	/* used for DO readback, curently unused */
+	/* used for DO readback, currently unused */
 	unsigned int do_readback[4];	/* up to 4 unsigned int suffice to hold 96 bits for PCI-DIO96 */
 
 	unsigned long dio_reg_base;	/*  address of port A of the first 8255 chip on board */
diff --git a/drivers/staging/comedi/drivers/me4000.c b/drivers/staging/comedi/drivers/me4000.c
index 6079913d14b..8b9fa0f9f1f 100644
--- a/drivers/staging/comedi/drivers/me4000.c
+++ b/drivers/staging/comedi/drivers/me4000.c
@@ -840,7 +840,7 @@ static int xilinx_download(struct comedi_device *dev)
 		       "comedi%d: me4000: xilinx_download(): DONE flag is not set\n",
 		       dev->minor);
 		printk(KERN_ERR
-		       "comedi%d: me4000: xilinx_download(): Download not succesful\n",
+		       "comedi%d: me4000: xilinx_download(): Download not successful\n",
 		       dev->minor);
 		return -EIO;
 	}
diff --git a/drivers/staging/comedi/drivers/pcl812.c b/drivers/staging/comedi/drivers/pcl812.c
index 0b51a48c3ad..0a5bc3d6da8 100644
--- a/drivers/staging/comedi/drivers/pcl812.c
+++ b/drivers/staging/comedi/drivers/pcl812.c
@@ -51,7 +51,7 @@ Options for PCL-812:
         5=A/D input range is +/-0.3125V
   [5] - 0=D/A outputs 0-5V  (internal reference -5V)
         1=D/A outputs 0-10V (internal reference -10V)
-        2=D/A outputs unknow (external reference)
+        2=D/A outputs unknown (external reference)
 
 Options for PCL-812PG, ACL-8112PG:
   [0] - IO Base
@@ -63,7 +63,7 @@ Options for PCL-812PG, ACL-8112PG:
         1=A/D have max +/-10V input
   [5] - 0=D/A outputs 0-5V  (internal reference -5V)
         1=D/A outputs 0-10V (internal reference -10V)
-        2=D/A outputs unknow (external reference)
+        2=D/A outputs unknown (external reference)
 
 Options for ACL-8112DG/HG, A-822PGL/PGH, A-823PGL/PGH, ACL-8216, A-826PG:
   [0] - IO Base
@@ -75,7 +75,7 @@ Options for ACL-8112DG/HG, A-822PGL/PGH, A-823PGL/PGH, ACL-8216, A-826PG:
         1=A/D channels are DIFF
   [5] - 0=D/A outputs 0-5V  (internal reference -5V)
         1=D/A outputs 0-10V (internal reference -10V)
-        2=D/A outputs unknow (external reference)
+        2=D/A outputs unknown (external reference)
 
 Options for A-821PGL/PGH:
   [0] - IO Base
diff --git a/drivers/staging/comedi/drivers/pcl816.c b/drivers/staging/comedi/drivers/pcl816.c
index 1b1708a58b6..852fe2458fd 100644
--- a/drivers/staging/comedi/drivers/pcl816.c
+++ b/drivers/staging/comedi/drivers/pcl816.c
@@ -112,7 +112,7 @@ struct pcl816_board {
 	int n_dichan;		/*  num of DI chans */
 	int n_dochan;		/*  num of DO chans */
 	const struct comedi_lrange *ai_range_type;	/*  default A/D rangelist */
-	const struct comedi_lrange *ao_range_type;	/*  dafault D/A rangelist */
+	const struct comedi_lrange *ao_range_type;	/*  default D/A rangelist */
 	unsigned int io_range;	/*  len of IO space */
 	unsigned int IRQbits;	/*  allowed interrupts */
 	unsigned int DMAbits;	/*  allowed DMA chans */
@@ -445,7 +445,7 @@ static irqreturn_t interrupt_pcl816(int irq, void *d)
 		comedi_error(dev, "bad IRQ!");
 		return IRQ_NONE;
 	}
-	comedi_error(dev, "IRQ from unknow source!");
+	comedi_error(dev, "IRQ from unknown source!");
 	return IRQ_NONE;
 }
 
diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c
index 819dd838b07..d0481013a83 100644
--- a/drivers/staging/comedi/drivers/pcl818.c
+++ b/drivers/staging/comedi/drivers/pcl818.c
@@ -50,7 +50,7 @@ A word or two about DMA. Driver support DMA operations at two ways:
           1, 10=A/D input -10V..+10V
     [5] - 0,  5=D/A output 0-5V  (internal reference -5V)
           1, 10=D/A output 0-10V (internal reference -10V)
-	  2    =D/A output unknow (external reference)
+	  2    =D/A output unknown (external reference)
 
    Options for PCL-818, PCL-818H:
     [0] - IO Base
@@ -60,7 +60,7 @@ A word or two about DMA. Driver support DMA operations at two ways:
               1= 1MHz clock for 8254
     [4] - 0,  5=D/A output 0-5V  (internal reference -5V)
           1, 10=D/A output 0-10V (internal reference -10V)
-	  2    =D/A output unknow (external reference)
+	  2    =D/A output unknown (external reference)
 
    Options for PCL-818HD, PCL-818HG:
     [0] - IO Base
@@ -71,7 +71,7 @@ A word or two about DMA. Driver support DMA operations at two ways:
               1= 1MHz clock for 8254
     [4] - 0,  5=D/A output 0-5V  (internal reference -5V)
           1, 10=D/A output 0-10V (internal reference -10V)
-   	  2    =D/A output unknow (external reference)
+   	  2    =D/A output unknown (external reference)
 
    Options for PCL-718:
     [0] - IO Base
@@ -92,7 +92,7 @@ A word or two about DMA. Driver support DMA operations at two ways:
 	     10=	     user defined unipolar
     [5] - 0,  5=D/A outputs 0-5V  (internal reference -5V)
           1, 10=D/A outputs 0-10V (internal reference -10V)
-	      2=D/A outputs unknow (external reference)
+	      2=D/A outputs unknown (external reference)
     [6] - 0, 60=max  60kHz A/D sampling
           1,100=max 100kHz A/D sampling (PCL-718 with Option 001 installed)
 
@@ -876,7 +876,7 @@ static irqreturn_t interrupt_pcl818(int irq, void *d)
 		return IRQ_NONE;
 	}
 
-	comedi_error(dev, "IRQ from unknow source!");
+	comedi_error(dev, "IRQ from unknown source!");
 	return IRQ_NONE;
 }
 
diff --git a/drivers/staging/dst/export.c b/drivers/staging/dst/export.c
index da5b6cf9baa..c324230e8b6 100644
--- a/drivers/staging/dst/export.c
+++ b/drivers/staging/dst/export.c
@@ -203,7 +203,7 @@ err_out_exit:
  * so to play good with all cases we just queue BIO into the queue
  * and wake up processing thread, which gets completed request and
  * send (encrypting if needed) it back to the client (if it was a read
- * request), or sends back reply that writing succesfully completed.
+ * request), or sends back reply that writing successfully completed.
  */
 static int dst_export_process_request_queue(struct dst_state *st)
 {
diff --git a/drivers/staging/et131x/et131x_adapter.h b/drivers/staging/et131x/et131x_adapter.h
index cc5a6ba55dc..81109b302cf 100644
--- a/drivers/staging/et131x/et131x_adapter.h
+++ b/drivers/staging/et131x/et131x_adapter.h
@@ -162,7 +162,7 @@ typedef struct _ce_stats_t {
 	u32 tx_deferred;
 
 	/* Rx Statistics. */
-	u32 rx_ov_flow;	/* Rx Over Flow */
+	u32 rx_ov_flow;	/* Rx Overflow */
 
 	u32 length_err;
 	u32 alignment_err;
diff --git a/drivers/staging/hv/hv_api.h b/drivers/staging/hv/hv_api.h
index 251e2d15533..9eb818ee07b 100644
--- a/drivers/staging/hv/hv_api.h
+++ b/drivers/staging/hv/hv_api.h
@@ -316,13 +316,13 @@
 
 /*
  * HV_STATUS_VMX_INSTRUCTION_FAILED
- * The requested VMX instruction failed to complete succesfully.
+ * The requested VMX instruction failed to complete successfully.
  */
 #define HV_STATUS_VMX_INSTRUCTION_FAILED		((u16)0x1011)
 
 /*
  * HV_STATUS_VMX_INSTRUCTION_FAILED_WITH_STATUS
- * The requested VMX instruction failed to complete succesfully indicating
+ * The requested VMX instruction failed to complete successfully indicating
  * status.
  */
 #define HV_STATUS_VMX_INSTRUCTION_FAILED_WITH_STATUS	((u16)0x1012)
diff --git a/drivers/staging/iio/accel/accel.h b/drivers/staging/iio/accel/accel.h
index 811fa0527a4..d7fc7f98348 100644
--- a/drivers/staging/iio/accel/accel.h
+++ b/drivers/staging/iio/accel/accel.h
@@ -31,13 +31,13 @@
 	IIO_DEVICE_ATTR(accel_z, S_IRUGO, _show, NULL, _addr)
 
 /* Thresholds are somewhat chip dependent - may need quite a few defs here */
-/* For unified thesholds (shared across all directions */
+/* For unified thresholds (shared across all directions */
 
 /**
  * IIO_DEV_ATTR_ACCEL_THRESH: unified threshold
  * @_mode: read/write
  * @_show: read detector threshold value
- * @_store: write detector theshold value
+ * @_store: write detector threshold value
  * @_addr: driver specific data, typically a register address
  *
  * This one is for cases where as single threshold covers all directions
@@ -48,7 +48,7 @@
 /**
  * IIO_DEV_ATTR_ACCEL_THRESH_X: independant direction threshold, x axis
  * @_mode: readable / writable
- * @_show: read x axis detector theshold value
+ * @_show: read x axis detector threshold value
  * @_store: write x axis detector threshold value
  * @_addr: device driver dependant, typically a register address
  **/
diff --git a/drivers/staging/iio/accel/sca3000.h b/drivers/staging/iio/accel/sca3000.h
index 29e11da0957..da7d3cb5ae7 100644
--- a/drivers/staging/iio/accel/sca3000.h
+++ b/drivers/staging/iio/accel/sca3000.h
@@ -74,7 +74,7 @@
 #define SCA3000_MEAS_MODE_OP_2			0x02
 
 /* In motion detection mode the accelerations are band pass filtered
- * (aprox 1 - 25Hz) and then a programmable theshold used to trigger
+ * (aprox 1 - 25Hz) and then a programmable threshold used to trigger
  * and interrupt.
  */
 #define SCA3000_MEAS_MODE_MOT_DET		0x03
@@ -139,7 +139,7 @@
 /* Values of mulipexed registers (write to ctrl_data after select) */
 #define SCA3000_REG_ADDR_CTRL_DATA		0x22
 
-/* Measurment modes available on some sca3000 series chips. Code assumes others
+/* Measurement modes available on some sca3000 series chips. Code assumes others
  * may become available in the future.
  *
  * Bypass - Bypass the low-pass filter in the signal channel so as to increase
diff --git a/drivers/staging/iio/accel/sca3000_core.c b/drivers/staging/iio/accel/sca3000_core.c
index e27e3b7d100..cedcaa2b3d1 100644
--- a/drivers/staging/iio/accel/sca3000_core.c
+++ b/drivers/staging/iio/accel/sca3000_core.c
@@ -720,7 +720,7 @@ error_ret:
 static IIO_DEV_ATTR_TEMP(sca3000_read_temp);
 
 /**
- * sca3000_show_thresh() sysfs query of a theshold
+ * sca3000_show_thresh() sysfs query of a threshold
  **/
 static ssize_t sca3000_show_thresh(struct device *dev,
 				   struct device_attribute *attr,
diff --git a/drivers/staging/octeon/cvmx-pow.h b/drivers/staging/octeon/cvmx-pow.h
index c5d66f272b0..bf9e069a898 100644
--- a/drivers/staging/octeon/cvmx-pow.h
+++ b/drivers/staging/octeon/cvmx-pow.h
@@ -1959,7 +1959,7 @@ static inline uint32_t cvmx_pow_tag_get_hw_bits(uint64_t tag)
  * @buffer_size:
  *               The size of the supplied buffer
  *
- * Returns Zero on sucess, negative on failure
+ * Returns Zero on success, negative on failure
  */
 extern int cvmx_pow_capture(void *buffer, int buffer_size);
 
diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c
index 81a851390f1..535294105f6 100644
--- a/drivers/staging/octeon/ethernet-tx.c
+++ b/drivers/staging/octeon/ethernet-tx.c
@@ -624,7 +624,7 @@ int cvm_oct_transmit_qos(struct net_device *dev, void *work_queue_entry,
 EXPORT_SYMBOL(cvm_oct_transmit_qos);
 
 /**
- * This function frees all skb that are currenty queued for TX.
+ * This function frees all skb that are currently queued for TX.
  *
  * @dev:    Device being shutdown
  */
diff --git a/drivers/staging/otus/80211core/ccmd.c b/drivers/staging/otus/80211core/ccmd.c
index 83dd8ba1328..8da28eee7fb 100644
--- a/drivers/staging/otus/80211core/ccmd.c
+++ b/drivers/staging/otus/80211core/ccmd.c
@@ -899,7 +899,7 @@ u16_t zfiWlanDisable(zdev_t *dev, u8_t ResetKeyCache)
 		zfStaDisableSWEncryption(dev);
 	}
 
-	/* Improve WEP/TKIP performace with HT AP,
+	/* Improve WEP/TKIP performance with HT AP,
 	detail information please look bug#32495 */
 	/* zfHpSetTTSIFSTime(dev, 0x8); */
 
@@ -1407,7 +1407,7 @@ u16_t zfWlanReset(zdev_t *dev)
 		zfStaDisableSWEncryption(dev);
 	}
 
-	/* 	Improve WEP/TKIP performace with HT AP,
+	/* 	Improve WEP/TKIP performance with HT AP,
 		detail information please look bug#32495
 	*/
 	/* zfHpSetTTSIFSTime(dev, 0x8); */
diff --git a/drivers/staging/otus/80211core/cmm.c b/drivers/staging/otus/80211core/cmm.c
index bed16b581a5..a6c1b41ba84 100644
--- a/drivers/staging/otus/80211core/cmm.c
+++ b/drivers/staging/otus/80211core/cmm.c
@@ -1428,7 +1428,7 @@ void zfProcessManagement(zdev_t* dev, zbuf_t* buf, struct zsAdd