znet: fix build failure from i82593.h relocation

znet was including "wireless/i82593.h" (which is a bit wierd), and I
missed that when I relocated i82593.h to drivers/staging/wavelan.  Since
I don't have ISA turned-on in my normal .config, I didn't see the build
failures -- mea culpa!

Signed-off-by: John W. Linville <linville@tuxdriver.com>

2 files changed, 1 insertions, 230 deletions

diff --git a/drivers/staging/wavelan/i82593.h b/drivers/staging/wavelan/i82593.h
deleted file mode 100644
index afac5c7a323..00000000000
--- a/drivers/staging/wavelan/i82593.h
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Definitions for Intel 82593 CSMA/CD Core LAN Controller
- * The definitions are taken from the 1992 users manual with Intel
- * order number 297125-001.
- *
- * /usr/src/pc/RCS/i82593.h,v 1.1 1996/07/17 15:23:12 root Exp
- *
- * Copyright 1994, Anders Klemets <klemets@it.kth.se>
- *
- * HISTORY
- * i82593.h,v
- * Revision 1.4  2005/11/4  09:15:00  baroniunas
- * Modified copyright with permission of author as follows:
- *
- *   "If I82539.H is the only file with my copyright statement
- *    that is included in the Source Forge project, then you have
- *    my approval to change the copyright statement to be a GPL
- *    license, in the way you proposed on October 10."
- *
- * Revision 1.1  1996/07/17 15:23:12  root
- * Initial revision
- *
- * Revision 1.3  1995/04/05  15:13:58  adj
- * Initial alpha release
- *
- * Revision 1.2  1994/06/16  23:57:31  klemets
- * Mirrored all the fields in the configuration block.
- *
- * Revision 1.1  1994/06/02  20:25:34  klemets
- * Initial revision
- *
- *
- */
-#ifndef	_I82593_H
-#define	_I82593_H
-
-/* Intel 82593 CSMA/CD Core LAN Controller */
-
-/* Port 0 Command Register definitions */
-
-/* Execution operations */
-#define OP0_NOP			0	/* CHNL = 0 */
-#define OP0_SWIT_TO_PORT_1	0	/* CHNL = 1 */
-#define OP0_IA_SETUP		1
-#define OP0_CONFIGURE		2
-#define OP0_MC_SETUP		3
-#define OP0_TRANSMIT		4
-#define OP0_TDR			5
-#define OP0_DUMP		6
-#define OP0_DIAGNOSE		7
-#define OP0_TRANSMIT_NO_CRC	9
-#define OP0_RETRANSMIT		12
-#define OP0_ABORT		13
-/* Reception operations */
-#define OP0_RCV_ENABLE		8
-#define OP0_RCV_DISABLE		10
-#define OP0_STOP_RCV		11
-/* Status pointer control operations */
-#define OP0_FIX_PTR		15	/* CHNL = 1 */
-#define OP0_RLS_PTR		15	/* CHNL = 0 */
-#define OP0_RESET		14
-
-#define CR0_CHNL		(1 << 4)	/* 0=Channel 0, 1=Channel 1 */
-#define CR0_STATUS_0		0x00
-#define CR0_STATUS_1		0x20
-#define CR0_STATUS_2		0x40
-#define CR0_STATUS_3		0x60
-#define CR0_INT_ACK		(1 << 7)	/* 0=No ack, 1=acknowledge */
-
-/* Port 0 Status Register definitions */
-
-#define SR0_NO_RESULT		0		/* dummy */
-#define SR0_EVENT_MASK		0x0f
-#define SR0_IA_SETUP_DONE	1
-#define SR0_CONFIGURE_DONE	2
-#define SR0_MC_SETUP_DONE	3
-#define SR0_TRANSMIT_DONE	4
-#define SR0_TDR_DONE		5
-#define SR0_DUMP_DONE		6
-#define SR0_DIAGNOSE_PASSED	7
-#define SR0_TRANSMIT_NO_CRC_DONE 9
-#define SR0_RETRANSMIT_DONE	12
-#define SR0_EXECUTION_ABORTED	13
-#define SR0_END_OF_FRAME	8
-#define SR0_RECEPTION_ABORTED	10
-#define SR0_DIAGNOSE_FAILED	15
-#define SR0_STOP_REG_HIT	11
-
-#define SR0_CHNL		(1 << 4)
-#define SR0_EXECUTION		(1 << 5)
-#define SR0_RECEPTION		(1 << 6)
-#define SR0_INTERRUPT		(1 << 7)
-#define SR0_BOTH_RX_TX		(SR0_EXECUTION | SR0_RECEPTION)
-
-#define SR3_EXEC_STATE_MASK	0x03
-#define SR3_EXEC_IDLE		0
-#define SR3_TX_ABORT_IN_PROGRESS 1
-#define SR3_EXEC_ACTIVE		2
-#define SR3_ABORT_IN_PROGRESS	3
-#define SR3_EXEC_CHNL		(1 << 2)
-#define SR3_STP_ON_NO_RSRC	(1 << 3)
-#define SR3_RCVING_NO_RSRC	(1 << 4)
-#define SR3_RCV_STATE_MASK	0x60
-#define SR3_RCV_IDLE		0x00
-#define SR3_RCV_READY		0x20
-#define SR3_RCV_ACTIVE		0x40
-#define SR3_RCV_STOP_IN_PROG	0x60
-#define SR3_RCV_CHNL		(1 << 7)
-
-/* Port 1 Command Register definitions */
-
-#define OP1_NOP			0
-#define OP1_SWIT_TO_PORT_0	1
-#define OP1_INT_DISABLE		2
-#define OP1_INT_ENABLE		3
-#define OP1_SET_TS		5
-#define OP1_RST_TS		7
-#define OP1_POWER_DOWN		8
-#define OP1_RESET_RING_MNGMT	11
-#define OP1_RESET		14
-#define OP1_SEL_RST		15
-
-#define CR1_STATUS_4		0x00
-#define CR1_STATUS_5		0x20
-#define CR1_STATUS_6		0x40
-#define CR1_STOP_REG_UPDATE	(1 << 7)
-
-/* Receive frame status bits */
-
-#define	RX_RCLD			(1 << 0)
-#define RX_IA_MATCH		(1 << 1)
-#define	RX_NO_AD_MATCH		(1 << 2)
-#define RX_NO_SFD		(1 << 3)
-#define RX_SRT_FRM		(1 << 7)
-#define RX_OVRRUN		(1 << 8)
-#define RX_ALG_ERR		(1 << 10)
-#define RX_CRC_ERR		(1 << 11)
-#define RX_LEN_ERR		(1 << 12)
-#define RX_RCV_OK		(1 << 13)
-#define RX_TYP_LEN		(1 << 15)
-
-/* Transmit status bits */
-
-#define TX_NCOL_MASK		0x0f
-#define TX_FRTL			(1 << 4)
-#define TX_MAX_COL		(1 << 5)
-#define TX_HRT_BEAT		(1 << 6)
-#define TX_DEFER		(1 << 7)
-#define TX_UND_RUN		(1 << 8)
-#define TX_LOST_CTS		(1 << 9)
-#define TX_LOST_CRS		(1 << 10)
-#define TX_LTCOL		(1 << 11)
-#define TX_OK			(1 << 13)
-#define TX_COLL			(1 << 15)
-
-struct i82593_conf_block {
-  u_char fifo_limit : 4,
-  	 forgnesi   : 1,
-  	 fifo_32    : 1,
-  	 d6mod      : 1,
-  	 throttle_enb : 1;
-  u_char throttle   : 6,
-	 cntrxint   : 1,
-	 contin	    : 1;
-  u_char addr_len   : 3,
-  	 acloc 	    : 1,
- 	 preamb_len : 2,
-  	 loopback   : 2;
-  u_char lin_prio   : 3,
-	 tbofstop   : 1,
-	 exp_prio   : 3,
-	 bof_met    : 1;
-  u_char	    : 4,
-	 ifrm_spc   : 4;
-  u_char	    : 5,
-	 slottim_low : 3;
-  u_char slottim_hi : 3,
-		    : 1,
-	 max_retr   : 4;
-  u_char prmisc     : 1,
-	 bc_dis     : 1,
-  		    : 1,
-	 crs_1	    : 1,
-	 nocrc_ins  : 1,
-	 crc_1632   : 1,
-  	 	    : 1,
-  	 crs_cdt    : 1;
-  u_char cs_filter  : 3,
-	 crs_src    : 1,
-	 cd_filter  : 3,
-		    : 1;
-  u_char	    : 2,
-  	 min_fr_len : 6;
-  u_char lng_typ    : 1,
-	 lng_fld    : 1,
-	 rxcrc_xf   : 1,
-	 artx	    : 1,
-	 sarec	    : 1,
-	 tx_jabber  : 1,	/* why is this called max_len in the manual? */
-	 hash_1	    : 1,
-  	 lbpkpol    : 1;
-  u_char	    : 6,
-  	 fdx	    : 1,
-  	  	    : 1;
-  u_char dummy_6    : 6,	/* supposed to be ones */
-  	 mult_ia    : 1,
-  	 dis_bof    : 1;
-  u_char dummy_1    : 1,	/* supposed to be one */
-	 tx_ifs_retrig : 2,
-	 mc_all     : 1,
-	 rcv_mon    : 2,
-	 frag_acpt  : 1,
-  	 tstrttrs   : 1;
-  u_char fretx	    : 1,
-	 runt_eop   : 1,
-	 hw_sw_pin  : 1,
-	 big_endn   : 1,
-	 syncrqs    : 1,
-	 sttlen     : 1,
-	 tx_eop     : 1,
-  	 rx_eop	    : 1;
-  u_char rbuf_size  : 5,
-	 rcvstop    : 1,
-  	 	    : 2;
-};
-
-#define I82593_MAX_MULTICAST_ADDRESSES	128	/* Hardware hashed filter */
-
-#endif /* _I82593_H */
diff --git a/drivers/staging/wavelan/wavelan_cs.p.h b/drivers/staging/wavelan/wavelan_cs.p.h
index 81d91531c4f..8fbfaa8a5a6 100644
--- a/drivers/staging/wavelan/wavelan_cs.p.h
+++ b/drivers/staging/wavelan/wavelan_cs.p.h
@@ -446,7 +446,7 @@
 #include <pcmcia/ds.h>
 
 /* Wavelan declarations */
-#include "i82593.h"	/* Definitions for the Intel chip */
+#include <linux/i82593.h>	/* Definitions for the Intel chip */
 
 #include "wavelan_cs.h"	/* Others bits of the hardware */