aboutsummaryrefslogtreecommitdiff
path: root/drivers/spi
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2009-12-14 10:22:11 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2009-12-14 10:22:11 -0800
commit478e4e9d7a618379676b17e64583ff3622f2fec5 (patch)
tree1f25c96499abbb0d0b47f75aa92134209fcc4ee8 /drivers/spi
parent2205afa7d13ec716935dfd4b8ff71059ee7aeb0c (diff)
parent965346e3b99e2c5f51bd1325ddd0257227000355 (diff)
Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (23 commits) spi: fix probe/remove section markings Add OMAP spi100k driver spi-imx: don't access struct device directly but use dev_get_platdata spi-imx: Add mx25 support spi-imx: use positive logic to distinguish cpu variants spi-imx: correct check for platform_get_irq failing ARM: NUC900: Add spi driver support for nuc900 spi: SuperH MSIOF SPI Master driver V2 spi: fix spidev compilation failure when VERBOSE is defined spi/au1550_spi: fix setupxfer not to override cfg with zeros spi/mpc8xxx: don't use __exit_p to wrap plat_mpc8xxx_spi_remove spi/i.MX: fix broken error handling for gpio_request spi/i.mx: drain MXC SPI transfer buffer when probing device MAINTAINERS: add SPI co-maintainer. spi/xilinx_spi: fix incorrect casting spi/mpc52xx-spi: minor cleanups xilinx_spi: add a platform driver using the xilinx_spi common module. xilinx_spi: add support for the DS570 IP. xilinx_spi: Switch to iomem functions and support little endian. xilinx_spi: Split into of driver and generic part. ...
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/Kconfig40
-rw-r--r--drivers/spi/Makefile5
-rw-r--r--drivers/spi/au1550_spi.c10
-rw-r--r--drivers/spi/mpc52xx_spi.c86
-rw-r--r--drivers/spi/omap_spi_100k.c635
-rw-r--r--drivers/spi/spi_imx.c35
-rw-r--r--drivers/spi/spi_mpc8xxx.c2
-rw-r--r--drivers/spi/spi_nuc900.c504
-rw-r--r--drivers/spi/spi_sh_msiof.c691
-rw-r--r--drivers/spi/spidev.c6
-rw-r--r--drivers/spi/xilinx_spi.c355
-rw-r--r--drivers/spi/xilinx_spi.h32
-rw-r--r--drivers/spi/xilinx_spi_of.c134
-rw-r--r--drivers/spi/xilinx_spi_pltfm.c102
14 files changed, 2418 insertions, 219 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 28fce65b859..2d9d7035936 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -169,6 +169,12 @@ config SPI_OMAP24XX
SPI master controller for OMAP24xx/OMAP34xx Multichannel SPI
(McSPI) modules.
+config SPI_OMAP_100K
+ tristate "OMAP SPI 100K"
+ depends on SPI_MASTER && (ARCH_OMAP850 || ARCH_OMAP730)
+ help
+ OMAP SPI 100K master controller for omap7xx boards.
+
config SPI_ORION
tristate "Orion SPI master (EXPERIMENTAL)"
depends on PLAT_ORION && EXPERIMENTAL
@@ -220,6 +226,13 @@ config SPI_S3C24XX_GPIO
the inbuilt hardware cannot provide the transfer mode, or
where the board is using non hardware connected pins.
+config SPI_SH_MSIOF
+ tristate "SuperH MSIOF SPI controller"
+ depends on SUPERH && HAVE_CLK
+ select SPI_BITBANG
+ help
+ SPI driver for SuperH MSIOF blocks.
+
config SPI_SH_SCI
tristate "SuperH SCI SPI controller"
depends on SUPERH
@@ -240,15 +253,38 @@ config SPI_TXX9
SPI driver for Toshiba TXx9 MIPS SoCs
config SPI_XILINX
- tristate "Xilinx SPI controller"
- depends on (XILINX_VIRTEX || MICROBLAZE) && EXPERIMENTAL
+ tristate "Xilinx SPI controller common module"
+ depends on HAS_IOMEM && EXPERIMENTAL
select SPI_BITBANG
+ select SPI_XILINX_OF if (XILINX_VIRTEX || MICROBLAZE)
help
This exposes the SPI controller IP from the Xilinx EDK.
See the "OPB Serial Peripheral Interface (SPI) (v1.00e)"
Product Specification document (DS464) for hardware details.
+ Or for the DS570, see "XPS Serial Peripheral Interface (SPI) (v2.00b)"
+
+config SPI_XILINX_OF
+ tristate "Xilinx SPI controller OF device"
+ depends on SPI_XILINX && (XILINX_VIRTEX || MICROBLAZE)
+ help
+ This is the OF driver for the SPI controller IP from the Xilinx EDK.
+
+config SPI_XILINX_PLTFM
+ tristate "Xilinx SPI controller platform device"
+ depends on SPI_XILINX
+ help
+ This is the platform driver for the SPI controller IP
+ from the Xilinx EDK.
+
+config SPI_NUC900
+ tristate "Nuvoton NUC900 series SPI"
+ depends on ARCH_W90X900 && EXPERIMENTAL
+ select SPI_BITBANG
+ help
+ SPI driver for Nuvoton NUC900 series ARM SoCs
+
#
# Add new SPI master controllers in alphabetical order above this line
#
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index e3f092a9afa..ed8c1675b52 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o
obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o
obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o
+obj-$(CONFIG_SPI_OMAP_100K) += omap_spi_100k.o
obj-$(CONFIG_SPI_ORION) += orion_spi.o
obj-$(CONFIG_SPI_PL022) += amba-pl022.o
obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o
@@ -32,8 +33,12 @@ obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
+obj-$(CONFIG_SPI_XILINX_OF) += xilinx_spi_of.o
+obj-$(CONFIG_SPI_XILINX_PLTFM) += xilinx_spi_pltfm.o
obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o
+obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o
obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o
+obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o
# ... add above this line ...
# SPI protocol drivers (device/link on bus)
diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c
index 76cbc1a6659..cfd5ff9508f 100644
--- a/drivers/spi/au1550_spi.c
+++ b/drivers/spi/au1550_spi.c
@@ -237,8 +237,14 @@ static int au1550_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t)
unsigned bpw, hz;
u32 cfg, stat;
- bpw = t ? t->bits_per_word : spi->bits_per_word;
- hz = t ? t->speed_hz : spi->max_speed_hz;
+ bpw = spi->bits_per_word;
+ hz = spi->max_speed_hz;
+ if (t) {
+ if (t->bits_per_word)
+ bpw = t->bits_per_word;
+ if (t->speed_hz)
+ hz = t->speed_hz;
+ }
if (bpw < 4 || bpw > 24) {
dev_err(&spi->dev, "setupxfer: invalid bits_per_word=%d\n",
diff --git a/drivers/spi/mpc52xx_spi.c b/drivers/spi/mpc52xx_spi.c
index ef8379b2c17..45bfe645817 100644
--- a/drivers/spi/mpc52xx_spi.c
+++ b/drivers/spi/mpc52xx_spi.c
@@ -18,9 +18,9 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/spi/spi.h>
-#include <linux/spi/mpc52xx_spi.h>
#include <linux/of_spi.h>
#include <linux/io.h>
+#include <linux/of_gpio.h>
#include <asm/time.h>
#include <asm/mpc52xx.h>
@@ -53,7 +53,7 @@ MODULE_LICENSE("GPL");
/* FSM state return values */
#define FSM_STOP 0 /* Nothing more for the state machine to */
/* do. If something interesting happens */
- /* then and IRQ will be received */
+ /* then an IRQ will be received */
#define FSM_POLL 1 /* need to poll for completion, an IRQ is */
/* not expected */
#define FSM_CONTINUE 2 /* Keep iterating the state machine */
@@ -61,13 +61,12 @@ MODULE_LICENSE("GPL");
/* Driver internal data */
struct mpc52xx_spi {
struct spi_master *master;
- u32 sysclk;
void __iomem *regs;
int irq0; /* MODF irq */
int irq1; /* SPIF irq */
- int ipb_freq;
+ unsigned int ipb_freq;
- /* Statistics */
+ /* Statistics; not used now, but will be reintroduced for debugfs */
int msg_count;
int wcol_count;
int wcol_ticks;
@@ -79,7 +78,6 @@ struct mpc52xx_spi {
spinlock_t lock;
struct work_struct work;
-
/* Details of current transfer (length, and buffer pointers) */
struct spi_message *message; /* current message */
struct spi_transfer *transfer; /* current transfer */
@@ -89,6 +87,8 @@ struct mpc52xx_spi {
u8 *rx_buf;
const u8 *tx_buf;
int cs_change;
+ int gpio_cs_count;
+ unsigned int *gpio_cs;
};
/*
@@ -96,7 +96,13 @@ struct mpc52xx_spi {
*/
static void mpc52xx_spi_chipsel(struct mpc52xx_spi *ms, int value)
{
- out_8(ms->regs + SPI_PORTDATA, value ? 0 : 0x08);
+ int cs;
+
+ if (ms->gpio_cs_count > 0) {
+ cs = ms->message->spi->chip_select;
+ gpio_set_value(ms->gpio_cs[cs], value ? 0 : 1);
+ } else
+ out_8(ms->regs + SPI_PORTDATA, value ? 0 : 0x08);
}
/*
@@ -221,7 +227,7 @@ static int mpc52xx_spi_fsmstate_transfer(int irq, struct mpc52xx_spi *ms,
ms->wcol_tx_timestamp = get_tbl();
data = 0;
if (ms->tx_buf)
- data = *(ms->tx_buf-1);
+ data = *(ms->tx_buf - 1);
out_8(ms->regs + SPI_DATA, data); /* try again */
return FSM_CONTINUE;
} else if (status & SPI_STATUS_MODF) {
@@ -390,7 +396,9 @@ static int __devinit mpc52xx_spi_probe(struct of_device *op,
struct spi_master *master;
struct mpc52xx_spi *ms;
void __iomem *regs;
- int rc;
+ u8 ctrl1;
+ int rc, i = 0;
+ int gpio_cs;
/* MMIO registers */
dev_dbg(&op->dev, "probing mpc5200 SPI device\n");
@@ -399,7 +407,8 @@ static int __devinit mpc52xx_spi_probe(struct of_device *op,
return -ENODEV;
/* initialize the device */
- out_8(regs+SPI_CTRL1, SPI_CTRL1_SPIE | SPI_CTRL1_SPE | SPI_CTRL1_MSTR);
+ ctrl1 = SPI_CTRL1_SPIE | SPI_CTRL1_SPE | SPI_CTRL1_MSTR;
+ out_8(regs + SPI_CTRL1, ctrl1);
out_8(regs + SPI_CTRL2, 0x0);
out_8(regs + SPI_DATADIR, 0xe); /* Set output pins */
out_8(regs + SPI_PORTDATA, 0x8); /* Deassert /SS signal */
@@ -409,6 +418,8 @@ static int __devinit mpc52xx_spi_probe(struct of_device *op,
* on the SPI bus. This fault will also occur if the SPI signals
* are not connected to any pins (port_config setting) */
in_8(regs + SPI_STATUS);
+ out_8(regs + SPI_CTRL1, ctrl1);
+
in_8(regs + SPI_DATA);
if (in_8(regs + SPI_STATUS) & SPI_STATUS_MODF) {
dev_err(&op->dev, "mode fault; is port_config correct?\n");
@@ -422,10 +433,12 @@ static int __devinit mpc52xx_spi_probe(struct of_device *op,
rc = -ENOMEM;
goto err_alloc;
}
+
master->bus_num = -1;
- master->num_chipselect = 1;
master->setup = mpc52xx_spi_setup;
master->transfer = mpc52xx_spi_transfer;
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
+
dev_set_drvdata(&op->dev, master);
ms = spi_master_get_devdata(master);
@@ -435,16 +448,51 @@ static int __devinit mpc52xx_spi_probe(struct of_device *op,
ms->irq1 = irq_of_parse_and_map(op->node, 1);
ms->state = mpc52xx_spi_fsmstate_idle;
ms->ipb_freq = mpc5xxx_get_bus_frequency(op->node);
+ ms->gpio_cs_count = of_gpio_count(op->node);
+ if (ms->gpio_cs_count > 0) {
+ master->num_chipselect = ms->gpio_cs_count;
+ ms->gpio_cs = kmalloc(ms->gpio_cs_count * sizeof(unsigned int),
+ GFP_KERNEL);
+ if (!ms->gpio_cs) {
+ rc = -ENOMEM;
+ goto err_alloc;
+ }
+
+ for (i = 0; i < ms->gpio_cs_count; i++) {
+ gpio_cs = of_get_gpio(op->node, i);
+ if (gpio_cs < 0) {
+ dev_err(&op->dev,
+ "could not parse the gpio field "
+ "in oftree\n");
+ rc = -ENODEV;
+ goto err_gpio;
+ }
+
+ rc = gpio_request(gpio_cs, dev_name(&op->dev));
+ if (rc) {
+ dev_err(&op->dev,
+ "can't request spi cs gpio #%d "
+ "on gpio line %d\n", i, gpio_cs);
+ goto err_gpio;
+ }
+
+ gpio_direction_output(gpio_cs, 1);
+ ms->gpio_cs[i] = gpio_cs;
+ }
+ } else {
+ master->num_chipselect = 1;
+ }
+
spin_lock_init(&ms->lock);
INIT_LIST_HEAD(&ms->queue);
INIT_WORK(&ms->work, mpc52xx_spi_wq);
/* Decide if interrupts can be used */
if (ms->irq0 && ms->irq1) {
- rc = request_irq(ms->irq0, mpc52xx_spi_irq, IRQF_SAMPLE_RANDOM,
+ rc = request_irq(ms->irq0, mpc52xx_spi_irq, 0,
"mpc5200-spi-modf", ms);
- rc |= request_irq(ms->irq1, mpc52xx_spi_irq, IRQF_SAMPLE_RANDOM,
- "mpc5200-spi-spiF", ms);
+ rc |= request_irq(ms->irq1, mpc52xx_spi_irq, 0,
+ "mpc5200-spi-spif", ms);
if (rc) {
free_irq(ms->irq0, ms);
free_irq(ms->irq1, ms);
@@ -471,6 +519,11 @@ static int __devinit mpc52xx_spi_probe(struct of_device *op,
err_register:
dev_err(&ms->master->dev, "initialization failed\n");
spi_master_put(master);
+ err_gpio:
+ while (i-- > 0)
+ gpio_free(ms->gpio_cs[i]);
+
+ kfree(ms->gpio_cs);
err_alloc:
err_init:
iounmap(regs);
@@ -481,10 +534,15 @@ static int __devexit mpc52xx_spi_remove(struct of_device *op)
{
struct spi_master *master = dev_get_drvdata(&op->dev);
struct mpc52xx_spi *ms = spi_master_get_devdata(master);
+ int i;
free_irq(ms->irq0, ms);
free_irq(ms->irq1, ms);
+ for (i = 0; i < ms->gpio_cs_count; i++)
+ gpio_free(ms->gpio_cs[i]);
+
+ kfree(ms->gpio_cs);
spi_unregister_master(master);
spi_master_put(master);
iounmap(ms->regs);
diff --git a/drivers/spi/omap_spi_100k.c b/drivers/spi/omap_spi_100k.c
new file mode 100644
index 00000000000..5355d90d1be
--- /dev/null
+++ b/drivers/spi/omap_spi_100k.c
@@ -0,0 +1,635 @@
+/*
+ * OMAP7xx SPI 100k controller driver
+ * Author: Fabrice Crohas <fcrohas@gmail.com>
+ * from original omap1_mcspi driver
+ *
+ * Copyright (C) 2005, 2006 Nokia Corporation
+ * Author: Samuel Ortiz <samuel.ortiz@nokia.com> and
+ * Juha Yrj�l� <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <linux/spi/spi.h>
+
+#include <plat/clock.h>
+
+#define OMAP1_SPI100K_MAX_FREQ 48000000
+
+#define ICR_SPITAS (OMAP7XX_ICR_BASE + 0x12)
+
+#define SPI_SETUP1 0x00
+#define SPI_SETUP2 0x02
+#define SPI_CTRL 0x04
+#define SPI_STATUS 0x06
+#define SPI_TX_LSB 0x08
+#define SPI_TX_MSB 0x0a
+#define SPI_RX_LSB 0x0c
+#define SPI_RX_MSB 0x0e
+
+#define SPI_SETUP1_INT_READ_ENABLE (1UL << 5)
+#define SPI_SETUP1_INT_WRITE_ENABLE (1UL << 4)
+#define SPI_SETUP1_CLOCK_DIVISOR(x) ((x) << 1)
+#define SPI_SETUP1_CLOCK_ENABLE (1UL << 0)
+
+#define SPI_SETUP2_ACTIVE_EDGE_FALLING (0UL << 0)
+#define SPI_SETUP2_ACTIVE_EDGE_RISING (1UL << 0)
+#define SPI_SETUP2_NEGATIVE_LEVEL (0UL << 5)
+#define SPI_SETUP2_POSITIVE_LEVEL (1UL << 5)
+#define SPI_SETUP2_LEVEL_TRIGGER (0UL << 10)
+#define SPI_SETUP2_EDGE_TRIGGER (1UL << 10)
+
+#define SPI_CTRL_SEN(x) ((x) << 7)
+#define SPI_CTRL_WORD_SIZE(x) (((x) - 1) << 2)
+#define SPI_CTRL_WR (1UL << 1)
+#define SPI_CTRL_RD (1UL << 0)
+
+#define SPI_STATUS_WE (1UL << 1)
+#define SPI_STATUS_RD (1UL << 0)
+
+#define WRITE 0
+#define READ 1
+
+
+/* use PIO for small transfers, avoiding DMA setup/teardown overhead and
+ * cache operations; better heuristics consider wordsize and bitrate.
+ */
+#define DMA_MIN_BYTES 8
+
+#define SPI_RUNNING 0
+#define SPI_SHUTDOWN 1
+
+struct omap1_spi100k {
+ struct work_struct work;
+
+ /* lock protects queue and registers */
+ spinlock_t lock;
+ struct list_head msg_queue;
+ struct spi_master *master;
+ struct clk *ick;
+ struct clk *fck;
+
+ /* Virtual base address of the controller */
+ void __iomem *base;
+
+ /* State of the SPI */
+ unsigned int state;
+};
+
+struct omap1_spi100k_cs {
+ void __iomem *base;
+ int word_len;
+};
+
+static struct workqueue_struct *omap1_spi100k_wq;
+
+#define MOD_REG_BIT(val, mask, set) do { \
+ if (set) \
+ val |= mask; \
+ else \
+ val &= ~mask; \
+} while (0)
+
+static void spi100k_enable_clock(struct spi_master *master)
+{
+ unsigned int val;
+ struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
+
+ /* enable SPI */
+ val = readw(spi100k->base + SPI_SETUP1);
+ val |= SPI_SETUP1_CLOCK_ENABLE;
+ writew(val, spi100k->base + SPI_SETUP1);
+}
+
+static void spi100k_disable_clock(struct spi_master *master)
+{
+ unsigned int val;
+ struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
+
+ /* disable SPI */
+ val = readw(spi100k->base + SPI_SETUP1);
+ val &= ~SPI_SETUP1_CLOCK_ENABLE;
+ writew(val, spi100k->base + SPI_SETUP1);
+}
+
+static void spi100k_write_data(struct spi_master *master, int len, int data)
+{
+ struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
+
+ /* write 16-bit word */
+ spi100k_enable_clock(master);
+ writew( data , spi100k->base + SPI_TX_MSB);
+
+ writew(SPI_CTRL_SEN(0) |
+ SPI_CTRL_WORD_SIZE(len) |
+ SPI_CTRL_WR,
+ spi100k->base + SPI_CTRL);
+
+ /* Wait for bit ack send change */
+ while((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_WE) != SPI_STATUS_WE);
+ udelay(1000);
+
+ spi100k_disable_clock(master);
+}
+
+static int spi100k_read_data(struct spi_master *master, int len)
+{
+ int dataH,dataL;
+ struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
+
+ spi100k_enable_clock(master);
+ writew(SPI_CTRL_SEN(0) |
+ SPI_CTRL_WORD_SIZE(len) |
+ SPI_CTRL_RD,
+ spi100k->base + SPI_CTRL);
+
+ while((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_RD) != SPI_STATUS_RD);
+ udelay(1000);
+
+ dataL = readw(spi100k->base + SPI_RX_LSB);
+ dataH = readw(spi100k->base + SPI_RX_MSB);
+ spi100k_disable_clock(master);
+
+ return dataL;
+}
+
+static void spi100k_open(struct spi_master *master)
+{
+ /* get control of SPI */
+ struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
+
+ writew(SPI_SETUP1_INT_READ_ENABLE |
+ SPI_SETUP1_INT_WRITE_ENABLE |
+ SPI_SETUP1_CLOCK_DIVISOR(0), spi100k->base + SPI_SETUP1);
+
+ /* configure clock and interrupts */
+ writew(SPI_SETUP2_ACTIVE_EDGE_FALLING |
+ SPI_SETUP2_NEGATIVE_LEVEL |
+ SPI_SETUP2_LEVEL_TRIGGER, spi100k->base + SPI_SETUP2);
+}
+
+static void omap1_spi100k_force_cs(struct omap1_spi100k *spi100k, int enable)
+{
+ if (enable)
+ writew(0x05fc, spi100k->base + SPI_CTRL);
+ else
+ writew(0x05fd, spi100k->base + SPI_CTRL);
+}
+
+static unsigned
+omap1_spi100k_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
+{
+ struct omap1_spi100k *spi100k;
+ struct omap1_spi100k_cs *cs = spi->controller_state;
+ unsigned int count, c;
+ int word_len;
+
+ spi100k = spi_master_get_devdata(spi->master);
+ count = xfer->len;
+ c = count;
+ word_len = cs->word_len;
+
+ /* RX_ONLY mode needs dummy data in TX reg */
+ if (xfer->tx_buf == NULL)
+ spi100k_write_data(spi->master,word_len, 0);
+
+ if (word_len <= 8) {
+ u8 *rx;
+ const u8 *tx;
+
+ rx = xfer->rx_buf;
+ tx = xfer->tx_buf;
+ do {
+ c-=1;
+ if (xfer->tx_buf != NULL)
+ spi100k_write_data(spi->master,word_len, *tx);
+ if (xfer->rx_buf != NULL)
+ *rx = spi100k_read_data(spi->master,word_len);
+ } while(c);
+ } else if (word_len <= 16) {
+ u16 *rx;
+ const u16 *tx;
+
+ rx = xfer->rx_buf;
+ tx = xfer->tx_buf;
+ do {
+ c-=2;
+ if (xfer->tx_buf != NULL)
+ spi100k_write_data(spi->master,word_len, *tx++);
+ if (xfer->rx_buf != NULL)
+ *rx++ = spi100k_read_data(spi->master,word_len);
+ } while(c);
+ } else if (word_len <= 32) {
+ u32 *rx;
+ const u32 *tx;
+
+ rx = xfer->rx_buf;
+ tx = xfer->tx_buf;
+ do {
+ c-=4;
+ if (xfer->tx_buf != NULL)
+ spi100k_write_data(spi->master,word_len, *tx);
+ if (xfer->rx_buf != NULL)
+ *rx = spi100k_read_data(spi->master,word_len);
+ } while(c);
+ }
+ return count - c;
+}
+
+/* called only when no transfer is active to this device */
+static int omap1_spi100k_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct omap1_spi100k *spi100k = spi_master_get_devdata(spi->master);
+ struct omap1_spi100k_cs *cs = spi->controller_state;
+ u8 word_len = spi->bits_per_word;
+
+ if (t != NULL && t->bits_per_word)
+ word_len = t->bits_per_word;
+ if (!word_len)
+ word_len = 8;
+
+ if (spi->bits_per_word > 32)
+ return -EINVAL;
+ cs->word_len = word_len;
+
+ /* SPI init before transfer */
+ writew(0x3e , spi100k->base + SPI_SETUP1);
+ writew(0x00 , spi100k->base + SPI_STATUS);
+ writew(0x3e , spi100k->base + SPI_CTRL);
+
+ return 0;
+}
+
+/* the spi->mode bits understood by this driver: */
+#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH)
+
+static int omap1_spi100k_setup(struct spi_device *spi)
+{
+ int ret;
+ struct omap1_spi100k *spi100k;
+ struct omap1_spi100k_cs *cs = spi->controller_state;
+
+ if (spi->bits_per_word < 4 || spi->bits_per_word > 32) {
+ dev_dbg(&spi->dev, "setup: unsupported %d bit words\n",
+ spi->bits_per_word);
+ return -EINVAL;
+ }
+
+ spi100k = spi_master_get_devdata(spi->master);
+
+ if (!cs) {
+ cs = kzalloc(sizeof *cs, GFP_KERNEL);
+ if (!cs)
+ return -ENOMEM;
+ cs->base = spi100k->base + spi->chip_select * 0x14;
+ spi->controller_state = cs;
+ }
+
+ spi100k_open(spi->master);
+
+ clk_enable(spi100k->ick);
+ clk_enable(spi100k->fck);
+
+ ret = omap1_spi100k_setup_transfer(spi, NULL);
+
+ clk_disable(spi100k->ick);
+ clk_disable(spi100k->fck);
+
+ return ret;
+}
+
+static void omap1_spi100k_work(struct work_struct *work)
+{
+ struct omap1_spi100k *spi100k;
+ int status = 0;
+
+ spi100k = container_of(work, struct omap1_spi100k, work);
+ spin_lock_irq(&spi100k->lock);
+
+ clk_enable(spi100k->ick);
+ clk_enable(spi100k->fck);
+
+ /* We only enable one channel at a time -- the one whose message is
+ * at the head of the queue -- although this controller would gladly
+ * arbitrate among multiple channels. This corresponds to "single
+ * channel" master mode. As a side effect, we need to manage the
+ * chipselect with the FORCE bit ... CS != channel enable.
+ */
+ while (!list_empty(&spi100k->msg_queue)) {
+ struct spi_message *m;
+ struct spi_device *spi;
+ struct spi_transfer *t = NULL;
+ int cs_active = 0;
+ struct omap1_spi100k_cs *cs;
+ int par_override = 0;
+
+ m = container_of(spi100k->msg_queue.next, struct spi_message,
+ queue);
+
+ list_del_init(&m->queue);
+ spin_unlock_irq(&spi100k->lock);
+
+ spi = m->spi;
+ cs = spi->controller_state;
+
+ list_for_each_entry(t, &m->transfers, transfer_list) {
+ if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) {
+ status = -EINVAL;
+ break;
+ }
+ if (par_override || t->speed_hz || t->bits_per_word) {
+ par_override = 1;
+ status = omap1_spi100k_setup_transfer(spi, t);
+ if (status < 0)
+ break;
+ if (!t->speed_hz && !t->bits_per_word)
+ par_override = 0;
+ }
+
+ if (!cs_active) {
+ omap1_spi100k_force_cs(spi100k, 1);
+ cs_active = 1;
+ }
+
+ if (t->len) {
+ unsigned count;
+
+ /* RX_ONLY mode needs dummy data in TX reg */
+ if (t->tx_buf == NULL)
+ spi100k_write_data(spi->master, 8, 0);
+
+ count = omap1_spi100k_txrx_pio(spi, t);
+ m->actual_length += count;
+
+ if (count != t->len) {
+ status = -EIO;
+ break;
+ }
+ }
+
+ if (t->delay_usecs)
+ udelay(t->delay_usecs);
+
+ /* ignore the "leave it on after last xfer" hint */
+
+ if (t->cs_change) {
+ omap1_spi100k_force_cs(spi100k, 0);
+ cs_active = 0;
+ }
+ }
+
+ /* Restore defaults if they were overriden */
+ if (par_override) {
+ par_override = 0;
+ status = omap1_spi100k_setup_transfer(spi, NULL);
+ }
+
+ if (cs_active)
+ omap1_spi100k_force_cs(spi100k, 0);
+
+ m->status = status;
+ m->complete(m->context);
+
+ spin_lock_irq(&spi100k->lock);
+ }
+
+ clk_disable(spi100k->ick);
+ clk_disable(spi100k->fck);
+ spin_unlock_irq(&spi100k->lock);
+
+ if (status < 0)
+ printk(KERN_WARNING "spi transfer failed with %d\n", status);
+}
+
+static int omap1_spi100k_transfer(struct spi_device *spi, struct spi_message *m)
+{
+ struct omap1_spi100k *spi100k;
+ unsigned long flags;
+ struct spi_transfer *t;
+
+ m->actual_length = 0;
+ m->status = -EINPROGRESS;
+
+ spi100k = spi_master_get_devdata(spi->master);
+
+ /* Don't accept new work if we're shutting down */
+ if (spi100k->state == SPI_SHUTDOWN)
+ return -ESHUTDOWN;
+
+ /* reject invalid messages and transfers */
+ if (list_empty(&m->transfers) || !m->complete)
+ return -EINVAL;
+
+ list_for_each_entry(t, &m->transfers, transfer_list) {
+ const void *tx_buf = t->tx_buf;
+ void *rx_buf = t->rx_buf;
+ unsigned len = t->len;
+
+ if (t->speed_hz > OMAP1_SPI100K_MAX_FREQ
+ || (len && !(rx_buf || tx_buf))
+ || (t->bits_per_word &&
+ ( t->bits_per_word < 4
+ || t->bits_per_word > 32))) {
+ dev_dbg(&spi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n",
+ t->speed_hz,
+ len,
+ tx_buf ? "tx" : "",
+ rx_buf ? "rx" : "",
+ t->bits_per_word);
+ return -EINVAL;
+ }
+
+ if (t->speed_hz && t->speed_hz < OMAP1_SPI100K_MAX_FREQ/(1<<16)) {
+ dev_dbg(&spi->dev, "%d Hz max exceeds %d\n",
+ t->speed_hz,
+ OMAP1_SPI100K_MAX_FREQ/(1<<16));
+ return -EINVAL;
+ }
+
+ }
+
+ spin_lock_irqsave(&spi100k->lock, flags);
+ list_add_tail(&m->queue, &spi100k->msg_queue);
+ queue_work(omap1_spi100k_wq, &spi100k->work);
+ spin_unlock_irqrestore(&spi100k->lock, flags);
+
+ return 0;
+}
+
+static int __init omap1_spi100k_reset(struct omap1_spi100k *spi100k)
+{
+ return 0;
+}
+
+static int __devinit omap1_spi100k_probe(struct platform_device *pdev)
+{
+ struct spi_master *master;
+ struct omap1_spi100k *spi100k;
+ int status = 0;
+
+ if (!pdev->id)
+ return -EINVAL;
+
+ master = spi_alloc_master(&pdev->dev, sizeof *spi100k);
+ if (master == NULL) {
+ dev_dbg(&pdev->dev, "master allocation failed\n");
+ return -ENOMEM;
+ }
+
+ if (pdev->id != -1)
+ master->bus_num = pdev->id;
+
+ master->setup = omap1_spi100k_setup;
+ master->transfer = omap1_spi100k_transfer;
+ master->cleanup = NULL;
+ master->num_chipselect = 2;
+ master->mode_bits = MODEBITS;
+
+ dev_set_drvdata(&pdev->dev, master);
+
+ spi100k = spi_master_get_devdata(master);
+ spi100k->master = master;
+
+ /*
+ * The memory region base address is taken as the platform_data.
+ * You should allocate this with ioremap() before initializing
+ * the SPI.
+ */
+ spi100k->base = (void __iomem *) pdev->dev.platform_data;
+
+ INIT_WORK(&spi100k->work, omap1_spi100k_work);
+
+ spin_lock_init(&spi100k->lock);
+ INIT_LIST_HEAD(&spi100k->msg_queue);
+ spi100k->ick = clk_get(&pdev->dev, "ick");
+ if (IS_ERR(spi100k->ick)) {
+ dev_dbg(&pdev->dev, "can't get spi100k_ick\n");
+ status = PTR_ERR(spi100k->ick);
+ goto err1;
+ }
+
+ spi100k->fck = clk_get(&pdev->dev, "fck");
+ if (IS_ERR(spi100k->fck)) {
+ dev_dbg(&pdev->dev, "can't get spi100k_fck\n");
+ status = PTR_ERR(spi100k->fck);
+ goto err2;
+ }
+
+ if (omap1_spi100k_reset(spi100k) < 0)
+ goto err3;
+
+ status = spi_register_master(master);
+ if (status < 0)
+ goto err3;
+
+ spi100k->state = SPI_RUNNING;
+
+ return status;
+
+err3:
+ clk_put(spi100k->fck);
+err2:
+ clk_put(spi100k->ick);
+err1:
+ spi_master_put(master);
+ return status;
+}
+
+static int __exit omap1_spi100k_remove(struct platform_device *pdev)
+{
+ struct spi_master *master;
+ struct omap1_spi100k *spi100k;
+ struct resource *r;
+ unsigned limit = 500;
+ unsigned long flags;
+ int status = 0;
+
+ master = dev_get_drvdata(&pdev->dev);
+ spi100k = spi_master_get_devdata(master);
+
+ spin_lock_irqsave(&spi100k->lock, flags);
+
+ spi100k->state = SPI_SHUTDOWN;
+ while (!list_empty(&spi100k->msg_queue) && limit--) {
+ spin_unlock_irqrestore(&spi100k->lock, flags);
+ msleep(10);
+ spin_lock_irqsave(&spi100k->lock, flags);
+ }
+
+ if (!list_empty(&spi100k->msg_queue))
+ status = -EBUSY;
+
+ spin_unlock_irqrestore(&spi100k->lock, flags);
+
+ if (status != 0)
+ return status;
+
+ clk_put(spi100k->fck);
+ clk_put(spi100k->ick);
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ spi_unregister_master(master);
+
+ return 0;
+}
+
+static struct platform_driver omap1_spi100k_driver = {
+ .driver = {
+ .name = "omap1_spi100k",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(omap1_spi100k_remove),
+};
+
+
+static int __init omap1_spi100k_init(void)
+{
+ omap1_spi100k_wq = create_singlethread_workqueue(
+ omap1_spi100k_driver.driver.name);
+
+ if (omap1_spi100k_wq == NULL)
+ return -1;
+
+ return platform_driver_probe(&omap1_spi100k_driver, omap1_spi100k_probe);
+}
+
+static void __exit omap1_spi100k_exit(void)
+{
+ platform_driver_unregister(&omap1_spi100k_driver);
+
+ destroy_workqueue(omap1_spi100k_wq);
+}
+
+module_init(omap1_spi100k_init);
+module_exit(omap1_spi100k_exit);
+
+MODULE_DESCRIPTION("OMAP7xx SPI 100k controller driver");
+MODULE_AUTHOR("Fabrice Crohas <fcrohas@gmail.com>");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 89c22efedfb..1893f1e96dc 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -44,6 +44,9 @@
#define MXC_CSPIINT 0x0c
#define MXC_RESET 0x1c
+#define MX3_CSPISTAT 0x14
+#define MX3_CSPISTAT_RR (1 << 3)
+
/* generic defines to abstract from the different register layouts */
#define MXC_INT_RR (1 << 0) /* Receive data ready interrupt */
#define MXC_INT_TE (1 << 1) /* Transmit FIFO empty interrupt */
@@ -205,7 +208,7 @@ static int mx31_config(struct spi_imx_data *spi_imx,
if (cpu_is_mx31())
reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT;
- else if (cpu_is_mx35()) {
+ else if (cpu_is_mx25() || cpu_is_mx35()) {
reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT;
reg |= MX31_CSPICTRL_SSCTL;
}
@@ -219,7 +222,7 @@ static int mx31_config(struct spi_imx_data *spi_imx,
if (config->cs < 0) {
if (cpu_is_mx31())
reg |= (config->cs + 32) << MX31_CSPICTRL_CS_SHIFT;
- else if (cpu_is_mx35())
+ else if (cpu_is_mx25() || cpu_is_mx35())
reg |= (config->cs + 32) << MX35_CSPICTRL_CS_SHIFT;
}
@@ -481,7 +484,7 @@ static void spi_imx_cleanup(struct spi_device *spi)
{
}
-static int __init spi_imx_probe(struct platform_device *pdev)
+static int __devinit spi_imx_probe(struct platform_device *pdev)
{
struct spi_imx_master *mxc_platform_info;
struct spi_master *master;
@@ -489,7 +492,7 @@ static int __init spi_imx_probe(struct platform_device *pdev)
struct resource *res;
int i, ret;
- mxc_platform_info = (struct spi_imx_master *)pdev->dev.platform_data;
+ mxc_platform_info = dev_get_platdata(&pdev->dev);
if (!mxc_platform_info) {
dev_err(&pdev->dev, "can't get the platform data\n");
return -EINVAL;
@@ -513,11 +516,12 @@ static int __init spi_imx_probe(struct platform_device *pdev)
continue;
ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME);
if (ret) {
- i--;
- while (i > 0)
+ while (i > 0) {
+ i--;
if (spi_imx->chipselect[i] >= 0)
- gpio_free(spi_imx->chipselect[i--]);
- dev_err(&pdev->dev, "can't get cs gpios");
+ gpio_free(spi_imx->chipselect[i]);
+ }
+ dev_err(&pdev->dev, "can't get cs gpios\n");
goto out_master_put;
}
}
@@ -551,7 +555,7 @@ static int __init spi_imx_probe(struct platform_device *pdev)
}
spi_imx->irq = platform_get_irq(pdev, 0);
- if (!spi_imx->irq) {
+ if (spi_imx->irq <= 0) {
ret = -EINVAL;
goto out_iounmap;
}
@@ -562,7 +566,7 @@ static int __init spi_imx_probe(struct platform_device *pdev)
goto out_iounmap;
}
- if (cpu_is_mx31() || cpu_is_mx35()) {
+ if (cpu_is_mx25() || cpu_is_mx31() || cpu_is_mx35()) {
spi_imx->intctrl = mx31_intctrl;
spi_imx->config = mx31_config;
spi_imx->trigger = mx31_trigger;
@@ -590,9 +594,14 @@ static int __init spi_imx_probe(struct platform_device *pdev)
clk_enable(spi_imx->clk);
spi_imx->spi_clk = clk_get_rate(spi_imx->clk);
- if (!cpu_is_mx31() || !cpu_is_mx35())
+ if (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
writel(1, spi_imx->base + MXC_RESET);
+ /* drain receive buffer */
+ if (cpu_is_mx25() || cpu_is_mx31() || cpu_is_mx35())
+ while (readl(spi_imx->base + MX3_CSPISTAT) & MX3_CSPISTAT_RR)
+ readl(spi_imx->base + MXC_CSPIRXDATA);
+
spi_imx->intctrl(spi_imx, 0);
ret = spi_bitbang_start(&spi_imx->bitbang);
@@ -625,7 +634,7 @@ out_master_put:
return ret;
}
-static int __exit spi_imx_remove(struct platform_device *pdev)
+static int __devexit spi_imx_remove(struct platform_device *pdev)
{
struct spi_master *master = platform_get_drvdata(pdev);
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -659,7 +668,7 @@ static struct platform_driver spi_imx_driver = {
.owner = THIS_MODULE,
},
.probe = spi_imx_probe,
- .remove = __exit_p(spi_imx_remove),
+ .remove = __devexit_p(spi_imx_remove),
};
static int __init spi_imx_init(void)
diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c
index 930135dc73b..e9390d747bf 100644
--- a/drivers/spi/spi_mpc8xxx.c
+++ b/drivers/spi/spi_mpc8xxx.c
@@ -1356,7 +1356,7 @@ static int __devexit plat_mpc8xxx_spi_remove(struct platform_device *pdev)
MODULE_ALIAS("platform:mpc8xxx_spi");
static struct platform_driver mpc8xxx_spi_driver = {
.probe = plat_mpc8xxx_spi_probe,
- .remove = __exit_p(plat_mpc8xxx_spi_remove),
+ .remove = __devexit_p(plat_mpc8xxx_spi_remove),
.driver = {
.name = "mpc8xxx_spi",
.owner = THIS_MODULE,
diff --git a/drivers/spi/spi_nuc900.c b/drivers/spi/spi_nuc900.c
new file mode 100644
index 00000000000..b319f9bf9b9
--- /dev/null
+++ b/drivers/spi/spi_nuc900.c
@@ -0,0 +1,504 @@
+/* linux/drivers/spi/spi_nuc900.c
+ *
+ * Copyright (c) 2009 Nuvoton technology.
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <mach/nuc900_spi.h>
+
+/* usi registers offset */
+#define USI_CNT 0x00
+#define USI_DIV 0x04
+#define USI_SSR 0x08
+#define USI_RX0 0x10
+#define USI_TX0 0x10
+
+/* usi register bit */
+#define ENINT (0x01 << 17)
+#define ENFLG (0x01 << 16)
+#define TXNUM (0x03 << 8)
+#define TXNEG (0x01 << 2)
+#define RXNEG (0x01 << 1)
+#define LSB (0x01 << 10)
+#define SELECTLEV (0x01 << 2)
+#define SELECTPOL (0x01 << 31)
+#define SELECTSLAVE 0x01
+#define GOBUSY 0x01
+
+struct nuc900_spi {
+ struct spi_bitbang bitbang;
+ struct completion done;
+ void __iomem *regs;
+ int irq;
+ int len;
+ int count;
+ const unsigned char *tx;
+ unsigned char *rx;
+ struct clk *clk;
+ struct resource *ioarea;
+ struct spi_master *master;
+ struct spi_device *curdev;
+ struct device *dev;
+ struct nuc900_spi_info *pdata;
+ spinlock_t lock;
+ struct resource *res;
+};
+
+static inline struct nuc900_spi *to_hw(struct spi_device *sdev)
+{
+ return spi_master_get_devdata(sdev->master);
+}
+
+static void nuc900_slave_select(struct spi_device *spi, unsigned int ssr)
+{
+ struct nuc900_spi *hw = to_hw(spi);
+ unsigned int val;
+ unsigned int cs = spi->mode & SPI_CS_HIGH ? 1 : 0;
+ unsigned int cpol = spi->mode & SPI_CPOL ? 1 : 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hw->lock, flags);
+
+ val = __raw_readl(hw->regs + USI_SSR);
+
+ if (!cs)
+ val &= ~SELECTLEV;
+ else
+ val |= SELECTLEV;
+
+ if (!ssr)
+ val &= ~SELECTSLAVE;
+ else
+ val |= SELECTSLAVE;
+
+ __raw_writel(val, hw->regs + USI_SSR);
+
+ val = __raw_readl(hw->regs + USI_CNT);
+
+ if (!cpol)
+ val &= ~SELECTPOL;
+ else
+ val |= SELECTPOL;
+
+ __raw_writel(val, hw->regs + USI_CNT);
+
+ spin_unlock_irqrestore(&hw->lock, flags);
+}
+
+static void nuc900_spi_chipsel(struct spi_device *spi, int value)
+{
+ switch (value) {
+ case BITBANG_CS_INACTIVE:
+ nuc900_slave_select(spi, 0);
+ break;
+
+ case BITBANG_CS_ACTIVE:
+ nuc900_slave_select(spi, 1);
+ break;
+ }
+}
+
+static void nuc900_spi_setup_txnum(struct nuc900_spi *hw,
+ unsigned int txnum)
+{
+ unsigned int val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hw->lock, flags);
+
+ val = __raw_readl(hw->regs + USI_CNT);
+
+ if (!txnum)
+ val &= ~TXNUM;
+ else
+ val |= txnum << 0x08;
+
+ __raw_writel(val, hw->regs + USI_CNT);
+
+ spin_unlock_irqrestore(&hw->lock, flags);
+
+}
+
+static void nuc900_spi_setup_txbitlen(struct nuc900_spi *hw,
+ unsigned int txbitlen)
+{
+ unsigned int val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hw->lock, flags);
+
+ val = __raw_readl(hw->regs + USI_CNT);
+
+ val |= (txbitlen << 0x03);
+
+ __raw_writel(val, hw->regs + USI_CNT);
+
+ spin_unlock_irqrestore(&hw->lock, flags);
+}
+
+static void nuc900_spi_gobusy(struct nuc900_spi *hw)
+{
+ unsigned int val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hw->lock, flags);
+
+ val = __raw_readl(hw->regs + USI_CNT);
+
+ val |= GOBUSY;
+
+ __raw_writel(val, hw->regs + USI_CNT);
+
+ spin_unlock_irqrestore(&hw->lock, flags);
+}
+
+static int nuc900_spi_setupxfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ return 0;
+}
+
+static int nuc900_spi_setup(struct spi_device *spi)
+{
+ return 0;
+}
+
+static inline unsigned int hw_txbyte(struct nuc900_spi *hw, int count)
+{
+ return hw->tx ? hw->tx[count] : 0;
+}
+
+static int nuc900_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct nuc900_spi *hw = to_hw(spi);
+
+ hw->tx = t->tx_buf;
+ hw->rx = t->rx_buf;
+ hw->len = t->len;
+ hw->count = 0;
+
+ __raw_writel(hw_txbyte(hw, 0x0), hw->regs + USI_TX0);
+
+ nuc900_spi_gobusy(hw);
+
+ wait_for_completion(&hw->done);
+
+ return hw->count;
+}
+
+static irqreturn_t nuc900_spi_irq(int irq, void *dev)
+{
+ struct nuc900_spi *hw = dev;
+ unsigned int status;
+ unsigned int count = hw->count;
+
+ status = __raw_readl(hw->regs + USI_CNT);
+ __raw_writel(status, hw->regs + USI_CNT);
+
+ if (status & ENFLG) {
+ hw->count++;
+
+ if (hw->rx)
+ hw->rx[count] = __raw_readl(hw->regs + USI_RX0);
+ count++;
+
+ if (count < hw->len) {
+ __raw_writel(hw_txbyte(hw, count), hw->regs + USI_TX0);
+ nuc900_spi_gobusy(hw);
+ } else {
+ complete(&hw->done);
+ }
+
+ return IRQ_HANDLED;
+ }
+
+ complete(&hw->done);
+ return IRQ_HANDLED;
+}
+
+static void nuc900_tx_edge(struct nuc900_spi *hw, unsigned int edge)
+{
+ unsigned int val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hw->lock, flags);
+
+ val = __raw_readl(hw->regs + USI_CNT);
+
+ if (edge)
+ val |= TXNEG;
+ else
+ val &= ~TXNEG;
+ __raw_writel(val, hw->regs + USI_CNT);
+
+ spin_unlock_irqrestore(&hw->lock, flags);
+}
+
+static void nuc900_rx_edge(struct nuc900_spi *hw, unsigned int edge)
+{
+ unsigned int val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hw->lock, flags);
+
+ val = __raw_readl(hw->regs + USI_CNT);
+
+ if (edge)
+ val |= RXNEG;
+ else
+ val &= ~RXNEG;
+ __raw_writel(val, hw->regs + USI_CNT);
+
+ spin_unlock_irqrestore(&hw->lock, flags);
+}
+
+static void nuc900_send_first(struct nuc900_spi *hw, unsigned int lsb)
+{
+ unsigned int val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hw->lock, flags);
+
+ val = __raw_readl(hw->regs + USI_CNT);
+
+ if (lsb)
+ val |= LSB;
+ else
+ val &= ~LSB;
+ __raw_writel(val, hw->regs + USI_CNT);
+
+ spin_unlock_irqrestore(&hw->lock, flags);
+}
+
+static void nuc900_set_sleep(struct nuc900_spi *hw, unsigned int sleep)
+{
+ unsigned int val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hw->lock, flags);
+
+ val = __raw_readl(hw->regs + USI_CNT);
+
+ if (sleep)
+ val |= (sleep << 12);
+ else
+ val &= ~(0x0f << 12);
+ __raw_writel(val, hw->regs + USI_CNT);
+
+ spin_unlock_irqrestore(&hw->lock, flags);
+}
+
+static void nuc900_enable_int(struct nuc900_spi *hw)
+{
+ unsigned int val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hw->lock, flags);
+
+ val = __raw_readl(hw->regs + USI_CNT);
+
+ val |= ENINT;
+
+ __raw_writel(val, hw->regs + USI_CNT);
+
+ spin_unlock_irqrestore(&hw->lock, flags);
+}
+
+static void nuc900_set_divider(struct nuc900_spi *hw)
+{
+ __raw_writel(hw->pdata->divider, hw->regs + USI_DIV);
+}
+
+static void nuc900_init_spi(struct nuc900_spi *hw)
+{
+ clk_enable(hw->clk);
+ spin_lock_init(&hw->lock);
+
+ nuc900_tx_edge(hw, hw->pdata->txneg);
+ nuc900_rx_edge(hw, hw->pdata->rxneg);
+ nuc900_send_first(hw, hw->pdata->lsb);
+ nuc900_set_sleep(hw, hw->pdata->sleep);
+ nuc900_spi_setup_txbitlen(hw, hw->pdata->txbitlen);
+ nuc900_spi_setup_txnum(hw, hw->pdata->txnum);
+ nuc900_set_divider(hw);
+ nuc900_enable_int(hw);
+}
+
+static int __devinit nuc900_spi_probe(struct platform_device *pdev)
+{
+ struct nuc900_spi *hw;
+ struct spi_master *master;
+ int err = 0;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(struct nuc900_spi));
+ if (master == NULL) {
+ dev_err(&pdev->dev, "No memory for spi_master\n");
+ err = -ENOMEM;
+ goto err_nomem;
+ }
+
+ hw = spi_master_get_devdata(master);
+ memset(hw, 0, sizeof(struct nuc900_spi));
+
+ hw->master = spi_master_get(master);
+ hw->pdata = pdev->dev.platform_data;
+ hw->dev = &pdev->dev;
+
+ if (hw->pdata == NULL) {
+ dev_err(&pdev->dev, "No platform data supplied\n");
+ err = -ENOENT;
+ goto err_pdata;
+ }
+
+ platform_set_drvdata(pdev, hw);
+ init_completion(&hw->done);
+
+ master->mode_bits = SPI_MODE_0;
+ master->num_chipselect = hw->pdata->num_cs;
+ master->bus_num = hw->pdata->bus_num;
+ hw->bitbang.master = hw->master;
+ hw->bitbang.setup_transfer = nuc900_spi_setupxfer;
+ hw->bitbang.chipselect = nuc900_spi_chipsel;
+ hw->bitbang.txrx_bufs = nuc900_spi_txrx;
+ hw->bitbang.master->setup = nuc900_spi_setup;
+
+ hw->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (hw->res == NULL) {
+ dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
+ err = -ENOENT;
+ goto err_pdata;
+ }
+
+ hw->ioarea = request_mem_region(hw->res->start,
+ resource_size(hw->res), pdev->name);
+
+ if (hw->ioarea == NULL) {
+ dev_err(&pdev->dev, "Cannot reserve region\n");
+ err = -ENXIO;
+ goto err_pdata;
+ }
+
+ hw->regs = ioremap(hw->res->start, resource_size(hw->res));
+ if (hw->regs == NULL) {
+ dev_err(&pdev->dev, "Cannot map IO\n");
+ err = -ENXIO;
+ goto err_iomap;
+ }
+
+ hw->irq = platform_get_irq(pdev, 0);
+ if (hw->irq < 0) {
+ dev_err(&pdev->dev, "No IRQ specified\n");
+ err = -ENOENT;
+ goto err_irq;
+ }
+
+ err = request_irq(hw->irq, nuc900_spi_irq, 0, pdev->name, hw);
+ if (err) {
+ dev_err(&pdev->dev, "Cannot claim IRQ\n");
+ goto err_irq;
+ }
+
+ hw->clk = clk_get(&pdev->dev, "spi");
+ if (IS_ERR(hw->clk)) {
+ dev_err(&pdev->dev, "No clock for device\n");
+ err = PTR_ERR(hw->clk);
+ goto err_clk;
+ }
+
+ mfp_set_groupg(&pdev->dev);
+ nuc900_init_spi(hw);
+
+ err = spi_bitbang_start(&hw->bitbang);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to register SPI master\n");
+ goto err_register;
+ }
+
+ return 0;
+
+err_register:
+ clk_disable(hw->clk);
+ clk_put(hw->clk);
+err_clk:
+ free_irq(hw->irq, hw);
+err_irq:
+ iounmap(hw->regs);
+err_iomap:
+ release_mem_region(hw->res->start, resource_size(hw->res));
+ kfree(hw->ioarea);
+err_pdata:
+ spi_master_put(hw->master);;
+
+err_nomem:
+ return err;
+}
+
+static int __devexit nuc900_spi_remove(struct platform_device *dev)
+{
+ struct nuc900_spi *hw = platform_get_drvdata(dev);
+
+ free_irq(hw->irq, hw);
+
+ platform_set_drvdata(dev, NULL);
+
+ spi_unregister_master(hw->master);
+
+ clk_disable(hw->clk);
+ clk_put(hw->clk);
+
+ iounmap(hw->regs);
+
+ release_mem_region(hw->res->start, resource_size(hw->res));
+ kfree(hw->ioarea);
+
+ spi_master_put(hw->master);
+ return 0;
+}
+
+static struct platform_driver nuc900_spi_driver = {
+ .probe = nuc900_spi_probe,
+ .remove = __devexit_p(nuc900_spi_remove),
+ .driver = {
+ .name = "nuc900-spi",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init nuc900_spi_init(void)
+{
+ return platform_driver_register(&nuc900_spi_driver);
+}
+
+static void __exit nuc900_spi_exit(void)
+{
+ platform_driver_unregister(&nuc900_spi_driver);
+}
+
+module_init(nuc900_spi_init);
+module_exit(nuc900_spi_exit);
+
+MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
+MODULE_DESCRIPTION("nuc900 spi driver!");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:nuc900-spi");
diff --git a/drivers/spi/spi_sh_msiof.c b/drivers/spi/spi_sh_msiof.c
new file mode 100644
index 00000000000..51e5e1dfa6e
--- /dev/null
+++ b/drivers/spi/spi_sh_msiof.c
@@ -0,0 +1,691 @@
+/*
+ * SuperH MSIOF SPI Master Interface
+ *
+ * Copyright (c) 2009 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <linux/pm_runtime.h>
+#include <linux/gpio.h>
+#include <linux/bitmap.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/spi/sh_msiof.h>
+
+#include <asm/spi.h>
+#include <asm/unaligned.h>
+
+struct sh_msiof_spi_priv {
+ struct spi_bitbang bitbang; /* must be first for spi_bitbang.c */
+ void __iomem *mapbase;
+ struct clk *clk;
+ struct platform_device *pdev;
+ struct sh_msiof_spi_info *info;
+ struct completion done;
+ unsigned long flags;
+ int tx_fifo_size;
+ int rx_fifo_size;
+};
+
+#define TMDR1 0x00
+#define TMDR2 0x04
+#define TMDR3 0x08
+#define RMDR1 0x10
+#define RMDR2 0x14
+#define RMDR3 0x18
+#define TSCR 0x20
+#define RSCR 0x22
+#define CTR 0x28
+#define FCTR 0x30
+#define STR 0x40
+#define IER 0x44
+#define TDR1 0x48
+#define TDR2 0x4c
+#define TFDR 0x50
+#define RDR1 0x58
+#define RDR2 0x5c
+#define RFDR 0x60
+
+#define CTR_TSCKE (1 << 15)
+#define CTR_TFSE (1 << 14)
+#define CTR_TXE (1 << 9)
+#define CTR_RXE (1 << 8)
+
+#define STR_TEOF (1 << 23)
+#define STR_REOF (1 << 7)
+
+static unsigned long sh_msiof_read(struct sh_msiof_spi_priv *p, int reg_offs)
+{
+ switch (reg_offs) {
+ case TSCR:
+ case RSCR:
+ return ioread16(p->mapbase + reg_offs);
+ default:
+ return ioread32(p->mapbase + reg_offs);
+ }
+}
+
+static void sh_msiof_write(struct sh_msiof_spi_priv *p, int reg_offs,
+ unsigned long value)
+{
+ switch (reg_offs) {
+ case TSCR:
+ case RSCR:
+ iowrite16(value, p->mapbase + reg_offs);
+ break;
+ default:
+ iowrite32(value, p->mapbase + reg_offs);
+ break;
+ }
+}
+
+static int sh_msiof_modify_ctr_wait(struct sh_msiof_spi_priv *p,
+ unsigned long clr, unsigned long set)
+{
+ unsigned long mask = clr | set;
+ unsigned long data;
+ int k;
+
+ data = sh_msiof_read(p, CTR);
+ data &= ~clr;
+ data |= set;
+ sh_msiof_write(p, CTR, data);
+
+ for (k = 100; k > 0; k--) {
+ if ((sh_msiof_read(p, CTR) & mask) == set)
+ break;
+
+ udelay(10);
+ }
+
+ return k > 0 ? 0 : -ETIMEDOUT;
+}
+
+static irqreturn_t sh_msiof_spi_irq(int irq, void *data)
+{
+ struct sh_msiof_spi_priv *p = data;
+
+ /* just disable the interrupt and wake up */
+ sh_msiof_write(p, IER, 0);
+ complete(&p->done);
+
+ return IRQ_HANDLED;
+}
+
+static struct {
+ unsigned short div;
+ unsigned short scr;
+} const sh_msiof_spi_clk_table[] = {
+ { 1, 0x0007 },
+ { 2, 0x0000 },
+ { 4, 0x0001 },
+ { 8, 0x0002 },
+ { 16, 0x0003 },
+ { 32, 0x0004 },
+ { 64, 0x1f00 },
+ { 128, 0x1f01 },
+ { 256, 0x1f02 },
+ { 512, 0x1f03 },
+ { 1024, 0x1f04 },
+};
+
+static void sh_msiof_spi_set_clk_regs(struct sh_msiof_spi_priv *p,
+ unsigned long parent_rate,
+ unsigned long spi_hz)
+{
+ unsigned long div = 1024;
+ size_t k;
+
+ if (!WARN_ON(!spi_hz || !parent_rate))
+ div = parent_rate / spi_hz;
+
+ /* TODO: make more fine grained */
+
+ for (k = 0; k < ARRAY_SIZE(sh_msiof_spi_clk_table); k++) {
+ if (sh_msiof_spi_clk_table[k].div >= div)
+ break;
+ }
+
+ k = min_t(int, k, ARRAY_SIZE(sh_msiof_spi_clk_table) - 1);
+
+ sh_msiof_write(p, TSCR, sh_msiof_spi_clk_table[k].scr);
+ sh_msiof_write(p, RSCR, sh_msiof_spi_clk_table[k].scr);
+}
+
+static void sh_msiof_spi_set_pin_regs(struct sh_msiof_spi_priv *p,
+ int cpol, int cpha,
+ int tx_hi_z, int lsb_first)
+{
+ unsigned long tmp;
+ int edge;
+
+ /*
+ * CPOL CPHA TSCKIZ RSCKIZ TEDG REDG(!)
+ * 0 0 10 10 1 0
+ * 0 1 10 10 0 1
+ * 1 0 11 11 0 1
+ * 1 1 11 11 1 0
+ *
+ * (!) Note: REDG is inverted recommended data sheet setting
+ */
+
+ sh_msiof_write(p, FCTR, 0);
+ sh_msiof_write(p, TMDR1, 0xe2000005 | (lsb_first << 24));
+ sh_msiof_write(p, RMDR1, 0x22000005 | (lsb_first << 24));
+
+ tmp = 0xa0000000;
+ tmp |= cpol << 30; /* TSCKIZ */
+ tmp |= cpol << 28; /* RSCKIZ */
+
+ edge = cpol ? cpha : !cpha;
+
+ tmp |= edge << 27; /* TEDG */
+ tmp |= !edge << 26; /* REDG */
+ tmp |= (tx_hi_z ? 2 : 0) << 22; /* TXDIZ */
+ sh_msiof_write(p, CTR, tmp);
+}
+
+static void sh_msiof_spi_set_mode_regs(struct sh_msiof_spi_priv *p,
+ const void *tx_buf, void *rx_buf,
+ int bits, int words)
+{
+ unsigned long dr2;
+
+ dr2 = ((bits - 1) << 24) | ((words - 1) << 16);
+
+ if (tx_buf)
+ sh_msiof_write(p, TMDR2, dr2);
+ else
+ sh_msiof_write(p, TMDR2, dr2 | 1);
+
+ if (rx_buf)
+ sh_msiof_write(p, RMDR2, dr2);
+
+ sh_msiof_write(p, IER, STR_TEOF | STR_REOF);
+}
+
+static void sh_msiof_reset_str(struct sh_msiof_spi_priv *p)
+{
+ sh_msiof_write(p, STR, sh_msiof_read(p, STR));
+}
+
+static void sh_msiof_spi_write_fifo_8(struct sh_msiof_spi_priv *p,
+ const void *tx_buf, int words, int fs)
+{
+ const unsigned char *buf_8 = tx_buf;
+ int k;
+
+ for (k = 0; k < words; k++)
+ sh_msiof_write(p, TFDR, buf_8[k] << fs);
+}
+
+static void sh_msiof_spi_write_fifo_16(struct sh_msiof_spi_priv *p,
+ const void *tx_buf, int words, int fs)
+{
+ const unsigned short *buf_16 = tx_buf;
+ int k;
+
+ for (k = 0; k < words; k++)
+ sh_msiof_write(p, TFDR, buf_16[k] << fs);
+}
+
+static void sh_msiof_spi_write_fifo_16u(struct sh_msiof_spi_priv *p,
+ const void *tx_buf, int words, int fs)
+{
+ const unsigned short *buf_16 = tx_buf;
+ int k;
+
+ for (k = 0; k < words; k++)
+ sh_msiof_write(p, TFDR, get_unaligned(&buf_16[k]) << fs);
+}
+
+static void sh_msiof_spi_write_fifo_32(struct sh_msiof_spi_priv *p,
+ const void *tx_buf, int words, int fs)
+{
+ const unsigned int *buf_32 = tx_buf;
+ int k;
+
+ for (k = 0; k < words; k++)
+ sh_msiof_write(p, TFDR, buf_32[k] << fs);
+}
+
+static void sh_msiof_spi_write_fifo_32u(struct sh_msiof_spi_priv *p,
+ const void *tx_buf, int words, int fs)
+{
+ const unsigned int *buf_32 = tx_buf;
+ int k;
+
+ for (k = 0; k < words; k++)
+ sh_msiof_write(p, TFDR, get_unaligned(&buf_32[k]) << fs);
+}
+
+static void sh_msiof_spi_read_fifo_8(struct sh_msiof_spi_priv *p,
+ void *rx_buf, int words, int fs)
+{
+ unsigned char *buf_8 = rx_buf;
+ int k;
+
+ for (k = 0; k < words; k++)
+ buf_8[k] = sh_msiof_read(p, RFDR) >> fs;
+}
+
+static void sh_msiof_spi_read_fifo_16(struct sh_msiof_spi_priv *p,
+ void *rx_buf, int words, int fs)
+{
+ unsigned short *buf_16 = rx_buf;
+ int k;
+
+ for (k = 0; k < words; k++)
+ buf_16[k] = sh_msiof_read(p, RFDR) >> fs;
+}
+
+static void sh_msiof_spi_read_fifo_16u(struct sh_msiof_spi_priv *p,
+ void *rx_buf, int words, int fs)
+{
+ unsigned short *buf_16 = rx_buf;
+ int k;
+
+ for (k = 0; k < words; k++)
+ put_unaligned(sh_msiof_read(p, RFDR) >> fs, &buf_16[k]);
+}
+
+static void sh_msiof_spi_read_fifo_32(struct sh_msiof_spi_priv *p,
+ void *rx_buf, int words, int fs)
+{
+ unsigned int *buf_32 = rx_buf;
+ int k;
+
+ for (k = 0; k < words; k++)
+ buf_32[k] = sh_msiof_read(p, RFDR) >> fs;
+}
+
+static void sh_msiof_spi_read_fifo_32u(struct sh_msiof_spi_priv *p,
+ void *rx_buf, int words, int fs)
+{
+ unsigned int *buf_32 = rx_buf;
+ int k;
+
+ for (k = 0; k < words; k++)
+ put_unaligned(sh_msiof_read(p, RFDR) >> fs, &buf_32[k]);
+}
+
+static int sh_msiof_spi_bits(struct spi_device *spi, struct spi_transfer *t)
+{
+ int bits;
+
+ bits = t ? t->bits_per_word : 0;
+ bits = bits ? bits : spi->bits_per_word;
+ return bits;
+}
+
+static unsigned long sh_msiof_spi_hz(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ unsigned long hz;
+
+ hz = t ? t->speed_hz : 0;
+ hz = hz ? hz : spi->max_speed_hz;
+ return hz;
+}
+
+static int sh_msiof_spi_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ int bits;
+
+ /* noting to check hz values against since parent clock is disabled */
+
+ bits = sh_msiof_spi_bits(spi, t);
+ if (bits < 8)
+ return -EINVAL;
+ if (bits > 32)
+ return -EINVAL;
+
+ return spi_bitbang_setup_transfer(spi, t);
+}
+
+static void sh_msiof_spi_chipselect(struct spi_device *spi, int is_on)
+{
+ struct sh_msiof_spi_priv *p = spi_master_get_devdata(spi->master);
+ int value;
+
+ /* chip select is active low unless SPI_CS_HIGH is set */
+ if (spi->mode & SPI_CS_HIGH)
+ value = (is_on == BITBANG_CS_ACTIVE) ? 1 : 0;
+ else
+ value = (is_on == BITBANG_CS_ACTIVE) ? 0 : 1;
+
+ if (is_on == BITBANG_CS_ACTIVE) {
+ if (!test_and_set_bit(0, &p->flags)) {
+ pm_runtime_get_sync(&p->pdev->dev);
+ clk_enable(p->clk);
+ }
+
+ /* Configure pins before asserting CS */
+ sh_msiof_spi_set_pin_regs(p, !!(spi->mode & SPI_CPOL),
+ !!(spi->mode & SPI_CPHA),
+ !!(spi->mode & SPI_3WIRE),
+ !!(spi->mode & SPI_LSB_FIRST));
+ }
+
+ /* use spi->controller data for CS (same strategy as spi_gpio) */
+ gpio_set_value((unsigned)spi->controller_data, value);
+
+ if (is_on == BITBANG_CS_INACTIVE) {
+ if (test_and_clear_bit(0, &p->flags)) {
+ clk_disable(p->clk);
+ pm_runtime_put(&p->pdev->dev);
+ }
+ }
+}
+
+static int sh_msiof_spi_txrx_once(struct sh_msiof_spi_priv *p,
+ void (*tx_fifo)(struct sh_msiof_spi_priv *,
+ const void *, int, int),
+ void (*rx_fifo)(struct sh_msiof_spi_priv *,
+ void *, int, int),
+ const void *tx_buf, void *rx_buf,
+ int words, int bits)
+{
+ int fifo_shift;
+ int ret;
+
+ /* limit maximum word transfer to rx/tx fifo size */
+ if (tx_buf)
+ words = min_t(int, words, p->tx_fifo_size);
+ if (rx_buf)
+ words = min_t(int, words, p->rx_fifo_size);
+
+ /* the fifo contents need shifting */
+ fifo_shift = 32 - bits;
+
+ /* setup msiof transfer mode registers */
+ sh_msiof_spi_set_mode_regs(p, tx_buf, rx_buf, bits, words);
+
+ /* write tx fifo */
+ if (tx_buf)
+ tx_fifo(p, tx_buf, words, fifo_shift);
+
+ /* setup clock and rx/tx signals */
+ ret = sh_msiof_modify_ctr_wait(p, 0, CTR_TSCKE);
+ if (rx_buf)
+ ret = ret ? ret : sh_msiof_modify_ctr_wait(p, 0, CTR_RXE);
+ ret = ret ? ret : sh_msiof_modify_ctr_wait(p, 0, CTR_TXE);
+
+ /* start by setting frame bit */
+ INIT_COMPLETION(p->done);
+ ret = ret ? ret : sh_msiof_modify_ctr_wait(p, 0, CTR_TFSE);
+ if (ret) {
+ dev_err(&p->pdev->dev, "failed to start hardware\n");
+ goto err;
+ }
+
+ /* wait for tx fifo to be emptied / rx fifo to be filled */
+ wait_for_completion(&p->done);
+
+ /* read rx fifo */
+ if (rx_buf)
+ rx_fifo(p, rx_buf, words, fifo_shift);
+
+ /* clear status bits */
+ sh_msiof_reset_str(p);
+
+ /* shut down frame, tx/tx and clock signals */
+ ret = sh_msiof_modify_ctr_wait(p, CTR_TFSE, 0);
+ ret = ret ? ret : sh_msiof_modify_ctr_wait(p, CTR_TXE, 0);
+ if (rx_buf)
+ ret = ret ? ret : sh_msiof_modify_ctr_wait(p, CTR_RXE, 0);
+ ret = ret ? ret : sh_msiof_modify_ctr_wait(p, CTR_TSCKE, 0);
+ if (ret) {
+ dev_err(&p->pdev->dev, "failed to shut down hardware\n");
+ goto err;
+ }
+
+ return words;
+
+ err:
+ sh_msiof_write(p, IER, 0);
+ return ret;
+}
+
+static int sh_msiof_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct sh_msiof_spi_priv *p = spi_master_get_devdata(spi->master);
+ void (*tx_fifo)(struct sh_msiof_spi_priv *, const void *, int, int);
+ void (*rx_fifo)(struct sh_msiof_spi_priv *, void *, int, int);
+ int bits;
+ int bytes_per_word;
+ int bytes_done;
+ int words;
+ int n;
+
+ bits = sh_msiof_spi_bits(spi, t);
+
+ /* setup bytes per word and fifo read/write functions */
+ if (bits <= 8) {
+ bytes_per_word = 1;
+ tx_fifo = sh_msiof_spi_write_fifo_8;
+ rx_fifo = sh_msiof_spi_read_fifo_8;
+ } else if (bits <= 16) {
+ bytes_per_word = 2;
+ if ((unsigned long)t->tx_buf & 0x01)
+ tx_fifo = sh_msiof_spi_write_fifo_16u;
+ else
+ tx_fifo = sh_msiof_spi_write_fifo_16;
+
+ if ((unsigned long)t->rx_buf & 0x01)
+ rx_fifo = sh_msiof_spi_read_fifo_16u;
+ else
+ rx_fifo = sh_msiof_spi_read_fifo_16;
+ } else {
+ bytes_per_word = 4;
+ if ((unsigned long)t->tx_buf & 0x03)
+ tx_fifo = sh_msiof_spi_write_fifo_32u;
+ else
+ tx_fifo = sh_msiof_spi_write_fifo_32;
+
+ if ((unsigned long)t->rx_buf & 0x03)
+ rx_fifo = sh_msiof_spi_read_fifo_32u;
+ else
+ rx_fifo = sh_msiof_spi_read_fifo_32;
+ }
+
+ /* setup clocks (clock already enabled in chipselect()) */
+ sh_msiof_spi_set_clk_regs(p, clk_get_rate(p->clk),
+ sh_msiof_spi_hz(spi, t));
+
+ /* transfer in fifo sized chunks */
+ words = t->len / bytes_per_word;
+ bytes_done = 0;
+
+ while (bytes_done < t->len) {
+ n = sh_msiof_spi_txrx_once(p, tx_fifo, rx_fifo,
+ t->tx_buf + bytes_done,
+ t->rx_buf + bytes_done,
+ words, bits);
+ if (n < 0)
+ break;
+
+ bytes_done += n * bytes_per_word;
+ words -= n;
+ }
+
+ return bytes_done;
+}
+
+static u32 sh_msiof_spi_txrx_word(struct spi_device *spi, unsigned nsecs,
+ u32 word, u8 bits)
+{
+ BUG(); /* unused but needed by bitbang code */
+ return 0;
+}
+
+static int sh_msiof_spi_probe(struct platform_device *pdev)
+{
+ struct resource *r;
+ struct spi_master *master;
+ struct sh_msiof_spi_priv *p;
+ char clk_name[16];
+ int i;
+ int ret;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(struct sh_msiof_spi_priv));
+ if (master == NULL) {
+ dev_err(&pdev->dev, "failed to allocate spi master\n");
+ ret = -ENOMEM;
+ goto err0;
+ }
+
+ p = spi_master_get_devdata(master);
+
+ platform_set_drvdata(pdev, p);
+ p->info = pdev->dev.platform_data;
+ init_completion(&p->done);
+
+ snprintf(clk_name, sizeof(clk_name), "msiof%d", pdev->id);
+ p->clk = clk_get(&pdev->dev, clk_name);
+ if (IS_ERR(p->clk)) {
+ dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
+ ret = PTR_ERR(p->clk);
+ goto err1;
+ }
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ i = platform_get_irq(pdev, 0);
+ if (!r || i < 0) {
+ dev_err(&pdev->dev, "cannot get platform resources\n");
+ ret = -ENOENT;
+ goto err2;
+ }
+ p->mapbase = ioremap_nocache(r->start, resource_size(r));
+ if (!p->mapbase) {
+ dev_err(&pdev->dev, "unable to ioremap\n");
+ ret = -ENXIO;
+ goto err2;
+ }
+
+ ret = request_irq(i, sh_msiof_spi_irq, IRQF_DISABLED,
+ dev_name(&pdev->dev), p);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to request irq\n");
+ goto err3;
+ }
+
+ p->pdev = pdev;
+ pm_runtime_enable(&pdev->dev);
+
+ /* The standard version of MSIOF use 64 word FIFOs */
+ p->tx_fifo_size = 64;
+ p->rx_fifo_size = 64;
+
+ /* Platform data may override FIFO sizes */
+ if (p->info->tx_fifo_override)
+ p->tx_fifo_size = p->info->tx_fifo_override;
+ if (p->info->rx_fifo_override)
+ p->rx_fifo_size = p->info->rx_fifo_override;
+
+ /* init master and bitbang code */
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+ master->mode_bits |= SPI_LSB_FIRST | SPI_3WIRE;
+ master->flags = 0;
+ master->bus_num = pdev->id;
+ master->num_chipselect = p->info->num_chipselect;
+ master->setup = spi_bitbang_setup;
+ master->cleanup = spi_bitbang_cleanup;
+
+ p->bitbang.master = master;
+ p->bitbang.chipselect = sh_msiof_spi_chipselect;
+ p->bitbang.setup_transfer = sh_msiof_spi_setup_transfer;
+ p->bitbang.txrx_bufs = sh_msiof_spi_txrx;
+ p->bitbang.txrx_word[SPI_MODE_0] = sh_msiof_spi_txrx_word;
+ p->bitbang.txrx_word[SPI_MODE_1] = sh_msiof_spi_txrx_word;
+ p->bitbang.txrx_word[SPI_MODE_2] = sh_msiof_spi_txrx_word;
+ p->bitbang.txrx_word[SPI_MODE_3] = sh_msiof_spi_txrx_word;
+
+ ret = spi_bitbang_start(&p->bitbang);
+ if (ret == 0)
+ return 0;
+
+ pm_runtime_disable(&pdev->dev);
+ err3:
+ iounmap(p->mapbase);
+ err2:
+ clk_put(p->clk);
+ err1:
+ spi_master_put(master);
+ err0:
+ return ret;
+}
+
+static int sh_msiof_spi_remove(struct platform_device *pdev)
+{
+ struct sh_msiof_spi_priv *p = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = spi_bitbang_stop(&p->bitbang);
+ if (!ret) {
+ pm_runtime_disable(&pdev->dev);
+ free_irq(platform_get_irq(pdev, 0), sh_msiof_spi_irq);
+ iounmap(p->mapbase);
+ clk_put(p->clk);
+ spi_master_put(p->bitbang.master);
+ }
+ return ret;
+}
+
+static int sh_msiof_spi_runtime_nop(struct device *dev)
+{
+ /* Runtime PM callback shared between ->runtime_suspend()
+ * and ->runtime_resume(). Simply returns success.
+ *
+ * This driver re-initializes all registers after
+ * pm_runtime_get_sync() anyway so there is no need
+ * to save and restore registers here.
+ */
+ return 0;
+}
+
+static struct dev_pm_ops sh_msiof_spi_dev_pm_ops = {
+ .runtime_suspend = sh_msiof_spi_runtime_nop,
+ .runtime_resume = sh_msiof_spi_runtime_nop,
+};
+
+static struct platform_driver sh_msiof_spi_drv = {
+ .probe = sh_msiof_spi_probe,
+ .remove = sh_msiof_spi_remove,
+ .driver = {
+ .name = "spi_sh_msiof",
+ .owner = THIS_MODULE,
+ .pm = &sh_msiof_spi_dev_pm_ops,
+ },
+};
+
+static int __init sh_msiof_spi_init(void)
+{
+ return platform_driver_register(&sh_msiof_spi_drv);
+}
+module_init(sh_msiof_spi_init);
+
+static void __exit sh_msiof_spi_exit(void)
+{
+ platform_driver_unregister(&sh_msiof_spi_drv);
+}
+module_exit(sh_msiof_spi_exit);
+
+MODULE_DESCRIPTION("SuperH MSIOF SPI Master Interface Driver");
+MODULE_AUTHOR("Magnus Damm");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:spi_sh_msiof");
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 20d7322e2f7..9c446e6003d 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -266,15 +266,15 @@ static int spidev_message(struct spidev_data *spidev,
k_tmp->delay_usecs = u_tmp->delay_usecs;
k_tmp->speed_hz = u_tmp->speed_hz;
#ifdef VERBOSE
- dev_dbg(&spi->dev,
+ dev_dbg(&spidev->spi->dev,
" xfer len %zd %s%s%s%dbits %u usec %uHz\n",
u_tmp->len,
u_tmp->rx_buf ? "rx " : "",
u_tmp->tx_buf ? "tx " : "",
u_tmp->cs_change ? "cs " : "",
- u_tmp->bits_per_word ? : spi->bits_per_word,
+ u_tmp->bits_per_word ? : spidev->spi->bits_per_word,
u_tmp->delay_usecs,
- u_tmp->speed_hz ? : spi->max_speed_hz);
+ u_tmp->speed_hz ? : spidev->spi->max_speed_hz);
#endif
spi_message_add_tail(k_tmp, &msg);
}
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 5a143b9f636..9f386379c16 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -14,22 +14,20 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-
-#include <linux/of_platform.h>
-#include <linux/of_device.h>
-#include <linux/of_spi.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/io.h>
+#include "xilinx_spi.h"
+#include <linux/spi/xilinx_spi.h>
+
#define XILINX_SPI_NAME "xilinx_spi"
/* Register definitions as per "OPB Serial Peripheral Interface (SPI) (v1.00e)
* Product Specification", DS464
*/
-#define XSPI_CR_OFFSET 0x62 /* 16-bit Control Register */
+#define XSPI_CR_OFFSET 0x60 /* Control Register */
#define XSPI_CR_ENABLE 0x02
#define XSPI_CR_MASTER_MODE 0x04
@@ -40,8 +38,9 @@
#define XSPI_CR_RXFIFO_RESET 0x40
#define XSPI_CR_MANUAL_SSELECT 0x80
#define XSPI_CR_TRANS_INHIBIT 0x100
+#define XSPI_CR_LSB_FIRST 0x200
-#define XSPI_SR_OFFSET 0x67 /* 8-bit Status Register */
+#define XSPI_SR_OFFSET 0x64 /* Status Register */
#define XSPI_SR_RX_EMPTY_MASK 0x01 /* Receive FIFO is empty */
#define XSPI_SR_RX_FULL_MASK 0x02 /* Receive FIFO is full */
@@ -49,8 +48,8 @@
#define XSPI_SR_TX_FULL_MASK 0x08 /* Transmit FIFO is full */
#define XSPI_SR_MODE_FAULT_MASK 0x10 /* Mode fault error */
-#define XSPI_TXD_OFFSET 0x6b /* 8-bit Data Transmit Register */
-#define XSPI_RXD_OFFSET 0x6f /* 8-bit Data Receive Register */
+#define XSPI_TXD_OFFSET 0x68 /* Data Transmit Register */
+#define XSPI_RXD_OFFSET 0x6c /* Data Receive Register */
#define XSPI_SSR_OFFSET 0x70 /* 32-bit Slave Select Register */
@@ -70,6 +69,7 @@
#define XSPI_INTR_TX_UNDERRUN 0x08 /* TxFIFO was underrun */
#define XSPI_INTR_RX_FULL 0x10 /* RxFIFO is full */
#define XSPI_INTR_RX_OVERRUN 0x20 /* RxFIFO was overrun */
+#define XSPI_INTR_TX_HALF_EMPTY 0x40 /* TxFIFO is half empty */
#define XIPIF_V123B_RESETR_OFFSET 0x40 /* IPIF reset register */
#define XIPIF_V123B_RESET_MASK 0x0a /* the value to write */
@@ -78,35 +78,85 @@ struct xilinx_spi {
/* bitbang has to be first */
struct spi_bitbang bitbang;
struct completion done;
-
+ struct resource mem; /* phys mem */
void __iomem *regs; /* virt. address of the control registers */
u32 irq;
- u32 speed_hz; /* SCK has a fixed frequency of speed_hz Hz */
-
u8 *rx_ptr; /* pointer in the Tx buffer */
const u8 *tx_ptr; /* pointer in the Rx buffer */
int remaining_bytes; /* the number of bytes left to transfer */
+ u8 bits_per_word;
+ unsigned int (*read_fn) (void __iomem *);
+ void (*write_fn) (u32, void __iomem *);
+ void (*tx_fn) (struct xilinx_spi *);
+ void (*rx_fn) (struct xilinx_spi *);
};
-static void xspi_init_hw(void __iomem *regs_base)
+static void xspi_tx8(struct xilinx_spi *xspi)
+{
+ xspi->write_fn(*xspi->tx_ptr, xspi->regs + XSPI_TXD_OFFSET);
+ xspi->tx_ptr++;
+}
+
+static void xspi_tx16(struct xilinx_spi *xspi)
+{
+ xspi->write_fn(*(u16 *)(xspi->tx_ptr), xspi->regs + XSPI_TXD_OFFSET);
+ xspi->tx_ptr += 2;
+}
+
+static void xspi_tx32(struct xilinx_spi *xspi)
+{
+ xspi->write_fn(*(u32 *)(xspi->tx_ptr), xspi->regs + XSPI_TXD_OFFSET);
+ xspi->tx_ptr += 4;
+}
+
+static void xspi_rx8(struct xilinx_spi *xspi)
+{
+ u32 data = xspi->read_fn(xspi->regs + XSPI_RXD_OFFSET);
+ if (xspi->rx_ptr) {
+ *xspi->rx_ptr = data & 0xff;
+ xspi->rx_ptr++;
+ }
+}
+
+static void xspi_rx16(struct xilinx_spi *xspi)
{
+ u32 data = xspi->read_fn(xspi->regs + XSPI_RXD_OFFSET);
+ if (xspi->rx_ptr) {
+ *(u16 *)(xspi->rx_ptr) = data & 0xffff;
+ xspi->rx_ptr += 2;
+ }
+}
+
+static void xspi_rx32(struct xilinx_spi *xspi)
+{
+ u32 data = xspi->read_fn(xspi->regs + XSPI_RXD_OFFSET);
+ if (xspi->rx_ptr) {
+ *(u32 *)(xspi->rx_ptr) = data;
+ xspi->rx_ptr += 4;
+ }
+}
+
+static void xspi_init_hw(struct xilinx_spi *xspi)
+{
+ void __iomem *regs_base = xspi->regs;
+
/* Reset the SPI device */
- out_be32(regs_base + XIPIF_V123B_RESETR_OFFSET,
- XIPIF_V123B_RESET_MASK);
+ xspi->write_fn(XIPIF_V123B_RESET_MASK,
+ regs_base + XIPIF_V123B_RESETR_OFFSET);
/* Disable all the interrupts just in case */
- out_be32(regs_base + XIPIF_V123B_IIER_OFFSET, 0);
+ xspi->write_fn(0, regs_base + XIPIF_V123B_IIER_OFFSET);
/* Enable the global IPIF interrupt */
- out_be32(regs_base + XIPIF_V123B_DGIER_OFFSET,
- XIPIF_V123B_GINTR_ENABLE);
+ xspi->write_fn(XIPIF_V123B_GINTR_ENABLE,
+ regs_base + XIPIF_V123B_DGIER_OFFSET);
/* Deselect the slave on the SPI bus */
- out_be32(regs_base + XSPI_SSR_OFFSET, 0xffff);
+ xspi->write_fn(0xffff, regs_base + XSPI_SSR_OFFSET);
/* Disable the transmitter, enable Manual Slave Select Assertion,
* put SPI controller into master mode, and enable it */
- out_be16(regs_base + XSPI_CR_OFFSET,
- XSPI_CR_TRANS_INHIBIT | XSPI_CR_MANUAL_SSELECT
- | XSPI_CR_MASTER_MODE | XSPI_CR_ENABLE);
+ xspi->write_fn(XSPI_CR_TRANS_INHIBIT | XSPI_CR_MANUAL_SSELECT |
+ XSPI_CR_MASTER_MODE | XSPI_CR_ENABLE | XSPI_CR_TXFIFO_RESET |
+ XSPI_CR_RXFIFO_RESET, regs_base + XSPI_CR_OFFSET);
}
static void xilinx_spi_chipselect(struct spi_device *spi, int is_on)
@@ -115,16 +165,16 @@ static void xilinx_spi_chipselect(struct spi_device *spi, int is_on)
if (is_on == BITBANG_CS_INACTIVE) {
/* Deselect the slave on the SPI bus */
- out_be32(xspi->regs + XSPI_SSR_OFFSET, 0xffff);
+ xspi->write_fn(0xffff, xspi->regs + XSPI_SSR_OFFSET);
} else if (is_on == BITBANG_CS_ACTIVE) {
/* Set the SPI clock phase and polarity */
- u16 cr = in_be16(xspi->regs + XSPI_CR_OFFSET)
+ u16 cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET)
& ~XSPI_CR_MODE_MASK;
if (spi->mode & SPI_CPHA)
cr |= XSPI_CR_CPHA;
if (spi->mode & SPI_CPOL)
cr |= XSPI_CR_CPOL;
- out_be16(xspi->regs + XSPI_CR_OFFSET, cr);
+ xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
/* We do not check spi->max_speed_hz here as the SPI clock
* frequency is not software programmable (the IP block design
@@ -132,25 +182,27 @@ static void xilinx_spi_chipselect(struct spi_device *spi, int is_on)
*/
/* Activate the chip select */
- out_be32(xspi->regs + XSPI_SSR_OFFSET,
- ~(0x0001 << spi->chip_select));
+ xspi->write_fn(~(0x0001 << spi->chip_select),
+ xspi->regs + XSPI_SSR_OFFSET);
}
}
/* spi_bitbang requires custom setup_transfer() to be defined if there is a
* custom txrx_bufs(). We have nothing to setup here as the SPI IP block
- * supports just 8 bits per word, and SPI clock can't be changed in software.
- * Check for 8 bits per word. Chip select delay calculations could be
+ * supports 8 or 16 bits per word which cannot be changed in software.
+ * SPI clock can't be changed in software either.
+ * Check for correct bits per word. Chip select delay calculations could be
* added here as soon as bitbang_work() can be made aware of the delay value.
*/
static int xilinx_spi_setup_transfer(struct spi_device *spi,
struct spi_transfer *t)
{
+ struct xilinx_spi *xspi = spi_master_get_devdata(spi->master);
u8 bits_per_word;
bits_per_word = (t && t->bits_per_word)
? t->bits_per_word : spi->bits_per_word;
- if (bits_per_word != 8) {
+ if (bits_per_word != xspi->bits_per_word) {
dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
__func__, bits_per_word);
return -EINVAL;
@@ -161,17 +213,16 @@ static int xilinx_spi_setup_transfer(struct spi_device *spi,
static int xilinx_spi_setup(struct spi_device *spi)
{
- struct spi_bitbang *bitbang;
- struct xilinx_spi *xspi;
- int retval;
-
- xspi = spi_master_get_devdata(spi->master);
- bitbang = &xspi->bitbang;
-
- retval = xilinx_spi_setup_transfer(spi, NULL);
- if (retval < 0)
- return retval;
-
+ /* always return 0, we can not check the number of bits.
+ * There are cases when SPI setup is called before any driver is
+ * there, in that case the SPI core defaults to 8 bits, which we
+ * do not support in some cases. But if we return an error, the
+ * SPI device would not be registered and no driver can get hold of it
+ * When the driver is there, it will call SPI setup again with the
+ * correct number of bits per transfer.
+ * If a driver setups with the wrong bit number, it will fail when
+ * it tries to do a transfer
+ */
return 0;
}
@@ -180,15 +231,14 @@ static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi)
u8 sr;
/* Fill the Tx FIFO with as many bytes as possible */
- sr = in_8(xspi->regs + XSPI_SR_OFFSET);
+ sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
while ((sr & XSPI_SR_TX_FULL_MASK) == 0 && xspi->remaining_bytes > 0) {
- if (xspi->tx_ptr) {
- out_8(xspi->regs + XSPI_TXD_OFFSET, *xspi->tx_ptr++);
- } else {
- out_8(xspi->regs + XSPI_TXD_OFFSET, 0);
- }
- xspi->remaining_bytes--;
- sr = in_8(xspi->regs + XSPI_SR_OFFSET);
+ if (xspi->tx_ptr)
+ xspi->tx_fn(xspi);
+ else
+ xspi->write_fn(0, xspi->regs + XSPI_TXD_OFFSET);
+ xspi->remaining_bytes -= xspi->bits_per_word / 8;
+ sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
}
}
@@ -210,18 +260,19 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
/* Enable the transmit empty interrupt, which we use to determine
* progress on the transmission.
*/
- ipif_ier = in_be32(xspi->regs + XIPIF_V123B_IIER_OFFSET);
- out_be32(xspi->regs + XIPIF_V123B_IIER_OFFSET,
- ipif_ier | XSPI_INTR_TX_EMPTY);
+ ipif_ier = xspi->read_fn(xspi->regs + XIPIF_V123B_IIER_OFFSET);
+ xspi->write_fn(ipif_ier | XSPI_INTR_TX_EMPTY,
+ xspi->regs + XIPIF_V123B_IIER_OFFSET);
/* Start the transfer by not inhibiting the transmitter any longer */
- cr = in_be16(xspi->regs + XSPI_CR_OFFSET) & ~XSPI_CR_TRANS_INHIBIT;
- out_be16(xspi->regs + XSPI_CR_OFFSET, cr);
+ cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET) &
+ ~XSPI_CR_TRANS_INHIBIT;
+ xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
wait_for_completion(&xspi->done);
/* Disable the transmit empty interrupt */
- out_be32(xspi->regs + XIPIF_V123B_IIER_OFFSET, ipif_ier);
+ xspi->write_fn(ipif_ier, xspi->regs + XIPIF_V123B_IIER_OFFSET);
return t->len - xspi->remaining_bytes;
}
@@ -238,8 +289,8 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id)
u32 ipif_isr;
/* Get the IPIF interrupts, and clear them immediately */
- ipif_isr = in_be32(xspi->regs + XIPIF_V123B_IISR_OFFSET);
- out_be32(xspi->regs + XIPIF_V123B_IISR_OFFSET, ipif_isr);
+ ipif_isr = xspi->read_fn(xspi->regs + XIPIF_V123B_IISR_OFFSET);
+ xspi->write_fn(ipif_isr, xspi->regs + XIPIF_V123B_IISR_OFFSET);
if (ipif_isr & XSPI_INTR_TX_EMPTY) { /* Transmission completed */
u16 cr;
@@ -250,20 +301,15 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id)
* transmitter while the Isr refills the transmit register/FIFO,
* or make sure it is stopped if we're done.
*/
- cr = in_be16(xspi->regs + XSPI_CR_OFFSET);
- out_be16(xspi->regs + XSPI_CR_OFFSET,
- cr | XSPI_CR_TRANS_INHIBIT);
+ cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET);
+ xspi->write_fn(cr | XSPI_CR_TRANS_INHIBIT,
+ xspi->regs + XSPI_CR_OFFSET);
/* Read out all the data from the Rx FIFO */
- sr = in_8(xspi->regs + XSPI_SR_OFFSET);
+ sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
while ((sr & XSPI_SR_RX_EMPTY_MASK) == 0) {
- u8 data;
-
- data = in_8(xspi->regs + XSPI_RXD_OFFSET);
- if (xspi->rx_ptr) {
- *xspi->rx_ptr++ = data;
- }
- sr = in_8(xspi->regs + XSPI_SR_OFFSET);
+ xspi->rx_fn(xspi);
+ sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
}
/* See if there is more data to send */
@@ -272,7 +318,7 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id)
/* Start the transfer by not inhibiting the
* transmitter any longer
*/
- out_be16(xspi->regs + XSPI_CR_OFFSET, cr);
+ xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
} else {
/* No more data to send.
* Indicate the transfer is completed.
@@ -284,40 +330,22 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static int __init xilinx_spi_of_probe(struct of_device *ofdev,
- const struct of_device_id *match)
+struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
+ u32 irq, s16 bus_num)
{
struct spi_master *master;
struct xilinx_spi *xspi;
- struct resource r_irq_struct;
- struct resource r_mem_struct;
-
- struct resource *r_irq = &r_irq_struct;
- struct resource *r_mem = &r_mem_struct;
- int rc = 0;
- const u32 *prop;
- int len;
-
- /* Get resources(memory, IRQ) associated with the device */
- master = spi_alloc_master(&ofdev->dev, sizeof(struct xilinx_spi));
+ struct xspi_platform_data *pdata = dev->platform_data;
+ int ret;
- if (master == NULL) {
- return -ENOMEM;
+ if (!pdata) {
+ dev_err(dev, "No platform data attached\n");
+ return NULL;
}
- dev_set_drvdata(&ofdev->dev, master);
-
- rc = of_address_to_resource(ofdev->node, 0, r_mem);
- if (rc) {
- dev_warn(&ofdev->dev, "invalid address\n");
- goto put_master;
- }
-
- rc = of_irq_to_resource(ofdev->node, 0, r_irq);
- if (rc == NO_IRQ) {
- dev_warn(&ofdev->dev, "no IRQ found\n");
- goto put_master;
- }
+ master = spi_alloc_master(dev, sizeof(struct xilinx_spi));
+ if (!master)
+ return NULL;
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA;
@@ -330,128 +358,87 @@ static int __init xilinx_spi_of_probe(struct of_device *ofdev,
xspi->bitbang.master->setup = xilinx_spi_setup;
init_completion(&xspi->done);
- xspi->irq = r_irq->start;
-
- if (!request_mem_region(r_mem->start,
- r_mem->end - r_mem->start + 1, XILINX_SPI_NAME)) {
- rc = -ENXIO;
- dev_warn(&ofdev->dev, "memory request failure\n");
+ if (!request_mem_region(mem->start, resource_size(mem),
+ XILINX_SPI_NAME))
goto put_master;
- }
- xspi->regs = ioremap(r_mem->start, r_mem->end - r_mem->start + 1);
+ xspi->regs = ioremap(mem->start, resource_size(mem));
if (xspi->regs == NULL) {
- rc = -ENOMEM;
- dev_warn(&ofdev->dev, "ioremap failure\n");
- goto release_mem;
+ dev_warn(dev, "ioremap failure\n");
+ goto map_failed;
}
- xspi->irq = r_irq->start;
-
- /* dynamic bus assignment */
- master->bus_num = -1;
- /* number of slave select bits is required */
- prop = of_get_property(ofdev->node, "xlnx,num-ss-bits", &len);
- if (!prop || len < sizeof(*prop)) {
- dev_warn(&ofdev->dev, "no 'xlnx,num-ss-bits' property\n");
- goto unmap_io;
+ master->bus_num = bus_num;
+ master->num_chipselect = pdata->num_chipselect;
+
+ xspi->mem = *mem;
+ xspi->irq = irq;
+ if (pdata->little_endian) {
+ xspi->read_fn = ioread32;
+ xspi->write_fn = iowrite32;
+ } else {
+ xspi->read_fn = ioread32be;
+ xspi->write_fn = iowrite32be;
}
- master->num_chipselect = *prop;
+ xspi->bits_per_word = pdata->bits_per_word;
+ if (xspi->bits_per_word == 8) {
+ xspi->tx_fn = xspi_tx8;
+ xspi->rx_fn = xspi_rx8;
+ } else if (xspi->bits_per_word == 16) {
+ xspi->tx_fn = xspi_tx16;
+ xspi->rx_fn = xspi_rx16;
+ } else if (xspi->bits_per_word == 32) {
+ xspi->tx_fn = xspi_tx32;
+ xspi->rx_fn = xspi_rx32;
+ } else
+ goto unmap_io;
+
/* SPI controller initializations */
- xspi_init_hw(xspi->regs);
+ xspi_init_hw(xspi);
/* Register for SPI Interrupt */
- rc = request_irq(xspi->irq, xilinx_spi_irq, 0, XILINX_SPI_NAME, xspi);
- if (rc != 0) {
- dev_warn(&ofdev->dev, "irq request failure: %d\n", xspi->irq);
+ ret = request_irq(xspi->irq, xilinx_spi_irq, 0, XILINX_SPI_NAME, xspi);
+ if (ret)
goto unmap_io;
- }
- rc = spi_bitbang_start(&xspi->bitbang);
- if (rc != 0) {
- dev_err(&ofdev->dev, "spi_bitbang_start FAILED\n");
+ ret = spi_bitbang_start(&xspi->bitbang);
+ if (ret) {
+ dev_err(dev, "spi_bitbang_start FAILED\n");
goto free_irq;
}
- dev_info(&ofdev->dev, "at 0x%08X mapped to 0x%08X, irq=%d\n",
- (unsigned int)r_mem->start, (u32)xspi->regs, xspi->irq);
-
- /* Add any subnodes on the SPI bus */
- of_register_spi_devices(master, ofdev->node);
-
- return rc;
+ dev_info(dev, "at 0x%08llX mapped to 0x%p, irq=%d\n",
+ (unsigned long long)mem->start, xspi->regs, xspi->irq);
+ return master;
free_irq:
free_irq(xspi->irq, xspi);
unmap_io:
iounmap(xspi->regs);
-release_mem:
- release_mem_region(r_mem->start, resource_size(r_mem));
+map_failed:
+ release_mem_region(mem->start, resource_size(mem));
put_master:
spi_master_put(master);
- return rc;
+ return NULL;
}
+EXPORT_SYMBOL(xilinx_spi_init);
-static int __devexit xilinx_spi_remove(struct of_device *ofdev)
+void xilinx_spi_deinit(struct spi_master *master)
{
struct xilinx_spi *xspi;
- struct spi_master *master;
- struct resource r_mem;
- master = platform_get_drvdata(ofdev);
xspi = spi_master_get_devdata(master);
spi_bitbang_stop(&xspi->bitbang);
free_irq(xspi->irq, xspi);
iounmap(xspi->regs);
- if (!of_address_to_resource(ofdev->node, 0, &r_mem))
- release_mem_region(r_mem.start, resource_size(&r_mem));
- dev_set_drvdata(&ofdev->dev, 0);
- spi_master_put(xspi->bitbang.master);
-
- return 0;
-}
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:" XILINX_SPI_NAME);
-
-static int __exit xilinx_spi_of_remove(struct of_device *op)
-{
- return xilinx_spi_remove(op);
-}
-static struct of_device_id xilinx_spi_of_match[] = {
- { .compatible = "xlnx,xps-spi-2.00.a", },
- { .compatible = "xlnx,xps-spi-2.00.b", },
- {}
-};
-
-MODULE_DEVICE_TABLE(of, xilinx_spi_of_match);
-
-static struct of_platform_driver xilinx_spi_of_driver = {
- .owner = THIS_MODULE,
- .name = "xilinx-xps-spi",
- .match_table = xilinx_spi_of_match,
- .probe = xilinx_spi_of_probe,
- .remove = __exit_p(xilinx_spi_of_remove),
- .driver = {
- .name = "xilinx-xps-spi",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init xilinx_spi_init(void)
-{
- return of_register_platform_driver(&xilinx_spi_of_driver);
+ release_mem_region(xspi->mem.start, resource_size(&xspi->mem));
+ spi_master_put(xspi->bitbang.master);
}
-module_init(xilinx_spi_init);
+EXPORT_SYMBOL(xilinx_spi_deinit);
-static void __exit xilinx_spi_exit(void)
-{
- of_unregister_platform_driver(&xilinx_spi_of_driver);
-}
-module_exit(xilinx_spi_exit);
MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
MODULE_DESCRIPTION("Xilinx SPI driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/spi/xilinx_spi.h b/drivers/spi/xilinx_spi.h
new file mode 100644
index 00000000000..d211accf68d
--- /dev/null
+++ b/drivers/spi/xilinx_spi.h
@@ -0,0 +1,32 @@
+/*
+ * Xilinx SPI device driver API and platform data header file
+ *
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _XILINX_SPI_H_
+#define _XILINX_SPI_H_
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#define XILINX_SPI_NAME "xilinx_spi"
+
+struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
+ u32 irq, s16 bus_num);
+
+void xilinx_spi_deinit(struct spi_master *master);
+#endif
diff --git a/drivers/spi/xilinx_spi_of.c b/drivers/spi/xilinx_spi_of.c
new file mode 100644
index 00000000000..71dc3adc049
--- /dev/null
+++ b/drivers/spi/xilinx_spi_of.c
@@ -0,0 +1,134 @@
+/*
+ * Xilinx SPI OF device driver
+ *
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Xilinx SPI devices as OF devices
+ *
+ * Inspired by xilinx_spi.c, 2002-2007 (c) MontaVista Software, Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/of_spi.h>
+
+#include <linux/spi/xilinx_spi.h>
+#include "xilinx_spi.h"
+
+
+static int __devinit xilinx_spi_of_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ struct spi_master *master;
+ struct xspi_platform_data *pdata;
+ struct resource r_mem;
+ struct resource r_irq;
+ int rc = 0;
+ const u32 *prop;
+ int len;
+
+ rc = of_address_to_resource(ofdev->node, 0, &r_mem);
+ if (rc) {
+ dev_warn(&ofdev->dev, "invalid address\n");
+ return rc;
+ }
+
+ rc = of_irq_to_resource(ofdev->node, 0, &r_irq);
+ if (rc == NO_IRQ) {
+ dev_warn(&ofdev->dev, "no IRQ found\n");
+ return -ENODEV;
+ }
+
+ ofdev->dev.platform_data =
+ kzalloc(sizeof(struct xspi_platform_data), GFP_KERNEL);
+ pdata = ofdev->dev.platform_data;
+ if (!pdata)
+ return -ENOMEM;
+
+ /* number of slave select bits is required */
+ prop = of_get_property(ofdev->node, "xlnx,num-ss-bits", &len);
+ if (!prop || len < sizeof(*prop)) {
+ dev_warn(&ofdev->dev, "no 'xlnx,num-ss-bits' property\n");
+ return -EINVAL;
+ }
+ pdata->num_chipselect = *prop;
+ pdata->bits_per_word = 8;
+ master = xilinx_spi_init(&ofdev->dev, &r_mem, r_irq.start, -1);
+ if (!master)
+ return -ENODEV;
+
+ dev_set_drvdata(&ofdev->dev, master);
+
+ /* Add any subnodes on the SPI bus */
+ of_register_spi_devices(master, ofdev->node);
+
+ return 0;
+}
+
+static int __devexit xilinx_spi_remove(struct of_device *ofdev)
+{
+ xilinx_spi_deinit(dev_get_drvdata(&ofdev->dev));
+ dev_set_drvdata(&ofdev->dev, 0);
+ kfree(ofdev->dev.platform_data);
+ ofdev->dev.platform_data = NULL;
+ return 0;
+}
+
+static int __exit xilinx_spi_of_remove(struct of_device *op)
+{
+ return xilinx_spi_remove(op);
+}
+
+static struct of_device_id xilinx_spi_of_match[] = {
+ { .compatible = "xlnx,xps-spi-2.00.a", },
+ { .compatible = "xlnx,xps-spi-2.00.b", },
+ {}
+};
+
+MODULE_DEVICE_TABLE(of, xilinx_spi_of_match);
+
+static struct of_platform_driver xilinx_spi_of_driver = {
+ .match_table = xilinx_spi_of_match,
+ .probe = xilinx_spi_of_probe,
+ .remove = __exit_p(xilinx_spi_of_remove),
+ .driver = {
+ .name = "xilinx-xps-spi",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init xilinx_spi_of_init(void)
+{
+ return of_register_platform_driver(&xilinx_spi_of_driver);
+}
+module_init(xilinx_spi_of_init);
+
+static void __exit xilinx_spi_of_exit(void)
+{
+ of_unregister_platform_driver(&xilinx_spi_of_driver);
+}
+module_exit(xilinx_spi_of_exit);
+
+MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
+MODULE_DESCRIPTION("Xilinx SPI platform driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/xilinx_spi_pltfm.c b/drivers/spi/xilinx_spi_pltfm.c
new file mode 100644
index 00000000000..24debac646a
--- /dev/null
+++ b/drivers/spi/xilinx_spi_pltfm.c
@@ -0,0 +1,102 @@
+/*
+ * Support for Xilinx SPI platform devices
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Xilinx SPI devices as platform devices
+ *
+ * Inspired by xilinx_spi.c, 2002-2007 (c) MontaVista Software, Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/spi/xilinx_spi.h>
+
+#include "xilinx_spi.h"
+
+static int __devinit xilinx_spi_probe(struct platform_device *dev)
+{
+ struct xspi_platform_data *pdata;
+ struct resource *r;
+ int irq;
+ struct spi_master *master;
+ u8 i;
+
+ pdata = dev->dev.platform_data;
+ if (!pdata)
+ return -ENODEV;
+
+ r = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!r)
+ return -ENODEV;
+
+ irq = platform_get_irq(dev, 0);
+ if (irq < 0)
+ return -ENXIO;
+
+ master = xilinx_spi_init(&dev->dev, r, irq, dev->id);
+ if (!master)
+ return -ENODEV;
+
+ for (i = 0; i < pdata->num_devices; i++)
+ spi_new_device(master, pdata->devices + i);
+
+ platform_set_drvdata(dev, master);
+ return 0;
+}
+
+static int __devexit xilinx_spi_remove(struct platform_device *dev)
+{
+ xilinx_spi_deinit(platform_get_drvdata(dev));
+ platform_set_drvdata(dev, 0);
+
+ return 0;
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:" XILINX_SPI_NAME);
+
+static struct platform_driver xilinx_spi_driver = {
+ .probe = xilinx_spi_probe,
+ .remove = __devexit_p(xilinx_spi_remove),
+ .driver = {
+ .name = XILINX_SPI_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init xilinx_spi_pltfm_init(void)
+{
+ return platform_driver_register(&xilinx_spi_driver);
+}
+module_init(xilinx_spi_pltfm_init);
+
+static void __exit xilinx_spi_pltfm_exit(void)
+{
+ platform_driver_unregister(&xilinx_spi_driver);
+}
+module_exit(xilinx_spi_pltfm_exit);
+
+MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
+MODULE_DESCRIPTION("Xilinx SPI platform driver");
+MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-26 00:16:59 +0000