/dev/spidevB.C interface

Add a filesystem API for <linux/spi/spi.h> stack.  The initial version of
this interface is purely synchronous.

dbrownell@users.sourceforge.net:

 Cleaned up, bugfixed; much simplified; added preliminary documentation.

 Works with mdev given CONFIG_SYSFS_DEPRECATED; and presumably udev.

 Updated SPI_IOC_MESSAGE ioctl to full spi_message semantics, supporting
 groups of one or more transfers (each of which may be full duplex if
 desired).

 This is marked as EXPERIMENTAL with an explicit disclaimer that the API
 (notably the ioctls) is subject to change.

Signed-off-by: Andrea Paterniani <a.paterniani@swapp-eng.it>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 584 insertions, 0 deletions

diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
new file mode 100644
index 00000000000..c0a6dce800a
--- /dev/null
+++ b/drivers/spi/spidev.c
@@ -0,0 +1,584 @@
+/*
+ * spidev.c -- simple synchronous userspace interface to SPI devices
+ *
+ * Copyright (C) 2006 SWAPP
+ *	Andrea Paterniani <a.paterniani@swapp-eng.it>
+ * Copyright (C) 2007 David Brownell (simplification, cleanup)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/ioctl.h>
+#include <linux/fs.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spidev.h>
+
+#include <asm/uaccess.h>
+
+
+/*
+ * This supports acccess to SPI devices using normal userspace I/O calls.
+ * Note that while traditional UNIX/POSIX I/O semantics are half duplex,
+ * and often mask message boundaries, full SPI support requires full duplex
+ * transfers.  There are several kinds of of internal message boundaries to
+ * handle chipselect management and other protocol options.
+ *
+ * SPI has a character major number assigned.  We allocate minor numbers
+ * dynamically using a bitmask.  You must use hotplug tools, such as udev
+ * (or mdev with busybox) to create and destroy the /dev/spidevB.C device
+ * nodes, since there is no fixed association of minor numbers with any
+ * particular SPI bus or device.
+ */
+#define SPIDEV_MAJOR			153	/* assigned */
+#define N_SPI_MINORS			32	/* ... up to 256 */
+
+static unsigned long	minors[N_SPI_MINORS / BITS_PER_LONG];
+
+
+/* Bit masks for spi_device.mode management */
+#define SPI_MODE_MASK			(SPI_CPHA | SPI_CPOL)
+
+
+struct spidev_data {
+	struct device		dev;
+	struct spi_device	*spi;
+	struct list_head	device_entry;
+
+	struct mutex		buf_lock;
+	unsigned		users;
+	u8			*buffer;
+};
+
+static LIST_HEAD(device_list);
+static DEFINE_MUTEX(device_list_lock);
+
+static unsigned bufsiz = 4096;
+module_param(bufsiz, uint, S_IRUGO);
+MODULE_PARM_DESC(bufsiz, "data bytes in biggest supported SPI message");
+
+/*-------------------------------------------------------------------------*/
+
+/* Read-only message with current device setup */
+static ssize_t
+spidev_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos)
+{
+	struct spidev_data	*spidev;
+	struct spi_device	*spi;
+	ssize_t			status = 0;
+
+	/* chipselect only toggles at start or end of operation */
+	if (count > bufsiz)
+		return -EMSGSIZE;
+
+	spidev = filp->private_data;
+	spi = spidev->spi;
+
+	mutex_lock(&spidev->buf_lock);
+	status = spi_read(spi, spidev->buffer, count);
+	if (status == 0) {
+		unsigned long	missing;
+
+		missing = copy_to_user(buf, spidev->buffer, count);
+		if (count && missing == count)
+			status = -EFAULT;
+		else
+			status = count - missing;
+	}
+	mutex_unlock(&spidev->buf_lock);
+
+	return status;
+}
+
+/* Write-only message with current device setup */
+static ssize_t
+spidev_write(struct file *filp, const char __user *buf,
+		size_t count, loff_t *f_pos)
+{
+	struct spidev_data	*spidev;
+	struct spi_device	*spi;
+	ssize_t			status = 0;
+	unsigned long		missing;
+
+	/* chipselect only toggles at start or end of operation */
+	if (count > bufsiz)
+		return -EMSGSIZE;
+
+	spidev = filp->private_data;
+	spi = spidev->spi;
+
+	mutex_lock(&spidev->buf_lock);
+	missing = copy_from_user(spidev->buffer, buf, count);
+	if (missing == 0) {
+		status = spi_write(spi, spidev->buffer, count);
+		if (status == 0)
+			status = count;
+	} else
+		status = -EFAULT;
+	mutex_unlock(&spidev->buf_lock);
+
+	return status;
+}
+
+static int spidev_message(struct spidev_data *spidev,
+		struct spi_ioc_transfer *u_xfers, unsigned n_xfers)
+{
+	struct spi_message	msg;
+	struct spi_transfer	*k_xfers;
+	struct spi_transfer	*k_tmp;
+	struct spi_ioc_transfer *u_tmp;
+	struct spi_device	*spi = spidev->spi;
+	unsigned		n, total;
+	u8			*buf;
+	int			status = -EFAULT;
+
+	spi_message_init(&msg);
+	k_xfers = kcalloc(n_xfers, sizeof(*k_tmp), GFP_KERNEL);
+	if (k_xfers == NULL)
+		return -ENOMEM;
+
+	/* Construct spi_message, copying any tx data to bounce buffer.
+	 * We walk the array of user-provided transfers, using each one
+	 * to initialize a kernel version of the same transfer.
+	 */
+	mutex_lock(&spidev->buf_lock);
+	buf = spidev->buffer;
+	total = 0;
+	for (n = n_xfers, k_tmp = k_xfers, u_tmp = u_xfers;
+			n;
+			n--, k_tmp++, u_tmp++) {
+		k_tmp->len = u_tmp->len;
+
+		if (u_tmp->rx_buf) {
+			k_tmp->rx_buf = buf;
+			if (!access_ok(VERIFY_WRITE, u_tmp->rx_buf, u_tmp->len))
+				goto done;
+		}
+		if (u_tmp->tx_buf) {
+			k_tmp->tx_buf = buf;
+			if (copy_from_user(buf, (const u8 __user *)u_tmp->tx_buf,
+					u_tmp->len))
+				goto done;
+		}
+
+		total += k_tmp->len;
+		if (total > bufsiz) {
+			status = -EMSGSIZE;
+			goto done;
+		}
+		buf += k_tmp->len;
+
+		k_tmp->cs_change = !!u_tmp->cs_change;
+		k_tmp->bits_per_word = u_tmp->bits_per_word;
+		k_tmp->delay_usecs = u_tmp->delay_usecs;
+		k_tmp->speed_hz = u_tmp->speed_hz;
+#ifdef VERBOSE
+		dev_dbg(&spi->dev,
+			"  xfer len %zd %s%s%s%dbits %u usec %uHz\n",
+			u_tmp->len,
+			u_tmp->rx_buf ? "rx " : "",
+			u_tmp->tx_buf ? "tx " : "",
+			u_tmp->cs_change ? "cs " : "",
+			u_tmp->bits_per_word ? : spi->bits_per_word,
+			u_tmp->delay_usecs,
+			u_tmp->speed_hz ? : spi->max_speed_hz);
+#endif
+		spi_message_add_tail(k_tmp, &msg);
+	}
+
+	status = spi_sync(spi, &msg);
+	if (status < 0)
+		goto done;
+
+	/* copy any rx data out of bounce buffer */
+	buf = spidev->buffer;
+	for (n = n_xfers, u_tmp = u_xfers; n; n--, u_tmp++) {
+		if (u_tmp->rx_buf) {
+			if (__copy_to_user((u8 __user *)u_tmp->rx_buf, buf,
+					u_tmp->len)) {
+				status = -EFAULT;
+				goto done;
+			}
+		}
+		buf += u_tmp->len;
+	}
+	status = total;
+
+done:
+	mutex_unlock(&spidev->buf_lock);
+	kfree(k_xfers);
+	return status;
+}
+
+static int
+spidev_ioctl(struct inode *inode, struct file *filp,
+		unsigned int cmd, unsigned long arg)
+{
+	int			err = 0;
+	int			retval = 0;
+	struct spidev_data	*spidev;
+	struct spi_device	*spi;
+	u32			tmp;
+	unsigned		n_ioc;
+	struct spi_ioc_transfer	*ioc;
+
+	/* Check type and command number */
+	if (_IOC_TYPE(cmd) != SPI_IOC_MAGIC)
+		return -ENOTTY;
+
+	/* Check access direction once here; don't repeat below.
+	 * IOC_DIR is from the user perspective, while access_ok is
+	 * from the kernel perspective; so they look reversed.
+	 */
+	if (_IOC_DIR(cmd) & _IOC_READ)
+		err = !access_ok(VERIFY_WRITE,
+				(void __user *)arg, _IOC_SIZE(cmd));
+	if (err == 0 && _IOC_DIR(cmd) & _IOC_WRITE)
+		err = !access_ok(VERIFY_READ,
+				(void __user *)arg, _IOC_SIZE(cmd));
+	if (err)
+		return -EFAULT;
+
+	spidev = filp->private_data;
+	spi = spidev->spi;
+
+	switch (cmd) {
+	/* read requests */
+	case SPI_IOC_RD_MODE:
+		retval = __put_user(spi->mode & SPI_MODE_MASK,
+					(__u8 __user *)arg);
+		break;
+	case SPI_IOC_RD_LSB_FIRST:
+		retval = __put_user((spi->mode & SPI_LSB_FIRST) ?  1 : 0,
+					(__u8 __user *)arg);
+		break;
+	case SPI_IOC_RD_BITS_PER_WORD:
+		retval = __put_user(spi->bits_per_word, (__u8 __user *)arg);
+		break;
+	case SPI_IOC_RD_MAX_SPEED_HZ:
+		retval = __put_user(spi->max_speed_hz, (__u32 __user *)arg);
+		break;
+
+	/* write requests */
+	case SPI_IOC_WR_MODE:
+		retval = __get_user(tmp, (u8 __user *)arg);
+		if (retval == 0) {
+			u8	save = spi->mode;
+
+			if (tmp & ~SPI_MODE_MASK) {
+				retval = -EINVAL;
+				break;
+			}
+
+			tmp |= spi->mode & ~SPI_MODE_MASK;
+			spi->mode = (u8)tmp;
+			retval = spi_setup(spi);
+			if (retval < 0)
+				spi->mode = save;
+			else
+				dev_dbg(&spi->dev, "spi mode %02x\n", tmp);
+		}
+		break;
+	case SPI_IOC_WR_LSB_FIRST:
+		retval = __get_user(tmp, (__u8 __user *)arg);
+		if (retval == 0) {
+			u8	save = spi->mode;
+
+			if (tmp)
+				spi->mode |= SPI_LSB_FIRST;
+			else
+				spi->mode &= ~SPI_LSB_FIRST;
+			retval = spi_setup(spi);
+			if (retval < 0)
+				spi->mode = save;
+			else
+				dev_dbg(&spi->dev, "%csb first\n",
+						tmp ? 'l' : 'm');
+		}
+		break;
+	case SPI_IOC_WR_BITS_PER_WORD:
+		retval = __get_user(tmp, (__u8 __user *)arg);
+		if (retval == 0) {
+			u8	save = spi->bits_per_word;
+
+			spi->bits_per_word = tmp;
+			retval = spi_setup(spi);
+			if (retval < 0)
+				spi->bits_per_word = save;
+			else
+				dev_dbg(&spi->dev, "%d bits per word\n", tmp);
+		}
+		break;
+	case SPI_IOC_WR_MAX_SPEED_HZ:
+		retval = __get_user(tmp, (__u32 __user *)arg);
+		if (retval == 0) {
+			u32	save = spi->max_speed_hz;
+
+			spi->max_speed_hz = tmp;
+			retval = spi_setup(spi);
+			if (retval < 0)
+				spi->max_speed_hz = save;
+			else
+				dev_dbg(&spi->dev, "%d Hz (max)\n", tmp);
+		}
+		break;
+
+	default:
+		/* segmented and/or full-duplex I/O request */
+		if (_IOC_NR(cmd) != _IOC_NR(SPI_IOC_MESSAGE(0))
+				|| _IOC_DIR(cmd) != _IOC_WRITE)
+			return -ENOTTY;
+
+		tmp = _IOC_SIZE(cmd);
+		if ((tmp % sizeof(struct spi_ioc_transfer)) != 0) {
+			retval = -EINVAL;
+			break;
+		}
+		n_ioc = tmp / sizeof(struct spi_ioc_transfer);
+		if (n_ioc == 0)
+			break;
+
+		/* copy into scratch area */
+		ioc = kmalloc(tmp, GFP_KERNEL);
+		if (!ioc) {
+			retval = -ENOMEM;
+			break;
+		}
+		if (__copy_from_user(ioc, (void __user *)arg, tmp)) {
+			retval = -EFAULT;
+			break;
+		}
+
+		/* translate to spi_message, execute */
+		retval = spidev_message(spidev, ioc, n_ioc);
+		kfree(ioc);
+		break;
+	}
+	return retval;
+}
+
+static int spidev_open(struct inode *inode, struct file *filp)
+{
+	struct spidev_data	*spidev;
+	int			status = -ENXIO;
+
+	mutex_lock(&device_list_lock);
+
+	list_for_each_entry(spidev, &device_list, device_entry) {
+		if (spidev->dev.devt == inode->i_rdev) {
+			status = 0;
+			break;
+		}
+	}
+	if (status == 0) {
+		if (!spidev->buffer) {
+			spidev->buffer = kmalloc(bufsiz, GFP_KERNEL);
+			if (!spidev->buffer) {
+				dev_dbg(&spidev->spi->dev, "open/ENOMEM\n");
+				status = -ENOMEM;
+			}
+		}
+		if (status == 0) {
+			spidev->users++;
+			filp->private_data = spidev;
+			nonseekable_open(inode, filp);
+		}
+	} else
+		pr_debug("spidev: nothing for minor %d\n", iminor(inode));
+
+	mutex_unlock(&device_list_lock);
+	return status;
+}
+
+static int spidev_release(struct inode *inode, struct file *filp)
+{
+	struct spidev_data	*spidev;
+	int			status = 0;
+
+	mutex_lock(&device_list_lock);
+	spidev = filp->private_data;
+	filp->private_data = NULL;
+	spidev->users--;
+	if (!spidev->users) {
+		kfree(spidev->buffer);
+		spidev->buffer = NULL;
+	}
+	mutex_unlock(&device_list_lock);
+
+	return status;
+}
+
+static struct file_operations spidev_fops = {
+	.owner =	THIS_MODULE,
+	/* REVISIT switch to aio primitives, so that userspace
+	 * gets more complete API coverage.  It'll simplify things
+	 * too, except for the locking.
+	 */
+	.write =	spidev_write,
+	.read =		spidev_read,
+	.ioctl =	spidev_ioctl,
+	.open =		spidev_open,
+	.release =	spidev_release,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* The main reason to have this class is to make mdev/udev create the
+ * /dev/spidevB.C character device nodes exposing our userspace API.
+ * It also simplifies memory management.
+ */
+
+static void spidev_classdev_release(struct device *dev)
+{
+	struct spidev_data	*spidev;
+
+	spidev = container_of(dev, struct spidev_data, dev);
+	kfree(spidev);
+}
+
+static struct class spidev_class = {
+	.name		= "spidev",
+	.owner		= THIS_MODULE,
+	.dev_release	= spidev_classdev_release,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int spidev_probe(struct spi_device *spi)
+{
+	struct spidev_data	*spidev;
+	int			status;
+	unsigned long		minor;
+
+	/* Allocate driver data */
+	spidev = kzalloc(sizeof(*spidev), GFP_KERNEL);
+	if (!spidev)
+		return -ENOMEM;
+
+	/* Initialize the driver data */
+	spidev->spi = spi;
+	mutex_init(&spidev->buf_lock);
+
+	INIT_LIST_HEAD(&spidev->device_entry);
+
+	/* If we can allocate a minor number, hook up this device.
+	 * Reusing minors is fine so long as udev or mdev is working.
+	 */
+	mutex_lock(&device_list_lock);
+	minor = find_first_zero_bit(minors, ARRAY_SIZE(minors));
+	if (minor < N_SPI_MINORS) {
+		spidev->dev.parent = &spi->dev;
+		spidev->dev.class = &spidev_class;
+		spidev->dev.devt = MKDEV(SPIDEV_MAJOR, minor);
+		snprintf(spidev->dev.bus_id, sizeof spidev->dev.bus_id,
+				"spidev%d.%d",
+				spi->master->bus_num, spi->chip_select);
+		status = device_register(&spidev->dev);
+	} else {
+		dev_dbg(&spi->dev, "no minor number available!\n");
+		status = -ENODEV;
+	}
+	if (status == 0) {
+		set_bit(minor, minors);
+		dev_set_drvdata(&spi->dev, spidev);
+		list_add(&spidev->device_entry, &device_list);
+	}
+	mutex_unlock(&device_list_lock);
+
+	if (status != 0)
+		kfree(spidev);
+
+	return status;
+}
+
+static int spidev_remove(struct spi_device *spi)
+{
+	struct spidev_data	*spidev = dev_get_drvdata(&spi->dev);
+
+	mutex_lock(&device_list_lock);
+
+	list_del(&spidev->device_entry);
+	dev_set_drvdata(&spi->dev, NULL);
+	clear_bit(MINOR(spidev->dev.devt), minors);
+	device_unregister(&spidev->dev);
+
+	mutex_unlock(&device_list_lock);
+
+	return 0;
+}
+
+static struct spi_driver spidev_spi = {
+	.driver = {
+		.name =		"spidev",
+		.owner =	THIS_MODULE,
+	},
+	.probe =	spidev_probe,
+	.remove =	__devexit_p(spidev_remove),
+
+	/* NOTE:  suspend/resume methods are not necessary here.
+	 * We don't do anything except pass the requests to/from
+	 * the underlying controller.  The refrigerator handles
+	 * most issues; the controller driver handles the rest.
+	 */
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init spidev_init(void)
+{
+	int status;
+
+	/* Claim our 256 reserved device numbers.  Then register a class
+	 * that will key udev/mdev to add/remove /dev nodes.  Last, register
+	 * the driver which manages those device numbers.
+	 */
+	BUILD_BUG_ON(N_SPI_MINORS > 256);
+	status = register_chrdev(SPIDEV_MAJOR, "spi", &spidev_fops);
+	if (status < 0)
+		return status;
+
+	status = class_register(&spidev_class);
+	if (status < 0) {
+		unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name);
+		return status;
+	}
+
+	status = spi_register_driver(&spidev_spi);
+	if (status < 0) {
+		class_unregister(&spidev_class);
+		unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name);
+	}
+	return status;
+}
+module_init(spidev_init);
+
+static void __exit spidev_exit(void)
+{
+	spi_unregister_driver(&spidev_spi);
+	class_unregister(&spidev_class);
+	unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name);
+}
+module_exit(spidev_exit);
+
+MODULE_AUTHOR("Andrea Paterniani, <a.paterniani@swapp-eng.it>");
+MODULE_DESCRIPTION("User mode SPI device interface");
+MODULE_LICENSE("GPL");