spi: reorganize drivers

Sort the SPI makefile and enforce the naming convention spi_*.c for
spi drivers.

This change also rolls the contents of atmel_spi.h into the .c file
since there is only one user of that particular include file.

v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be
      be the predominant pattern for subsystem prefixes.
    - Clean up filenames in Kconfig and header comment blocks

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 0 insertions, 593 deletions

diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
deleted file mode 100644
index 160d3266205..00000000000
--- a/drivers/spi/omap_uwire.c
+++ /dev/null
@@ -1,593 +0,0 @@
-/*
- * omap_uwire.c -- MicroWire interface driver for OMAP
- *
- * Copyright 2003 MontaVista Software Inc. <source@mvista.com>
- *
- * Ported to 2.6 OMAP uwire interface.
- * Copyright (C) 2004 Texas Instruments.
- *
- * Generalization patches by Juha Yrjola <juha.yrjola@nokia.com>
- *
- * Copyright (C) 2005 David Brownell (ported to 2.6 SPI interface)
- * Copyright (C) 2006 Nokia
- *
- * Many updates by Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/slab.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_bitbang.h>
-
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/io.h>
-#include <asm/mach-types.h>
-
-#include <plat/mux.h>
-#include <plat/omap7xx.h>	/* OMAP7XX_IO_CONF registers */
-
-
-/* FIXME address is now a platform device resource,
- * and irqs should show there too...
- */
-#define UWIRE_BASE_PHYS		0xFFFB3000
-
-/* uWire Registers: */
-#define UWIRE_IO_SIZE 0x20
-#define UWIRE_TDR     0x00
-#define UWIRE_RDR     0x00
-#define UWIRE_CSR     0x01
-#define UWIRE_SR1     0x02
-#define UWIRE_SR2     0x03
-#define UWIRE_SR3     0x04
-#define UWIRE_SR4     0x05
-#define UWIRE_SR5     0x06
-
-/* CSR bits */
-#define	RDRB	(1 << 15)
-#define	CSRB	(1 << 14)
-#define	START	(1 << 13)
-#define	CS_CMD	(1 << 12)
-
-/* SR1 or SR2 bits */
-#define UWIRE_READ_FALLING_EDGE		0x0001
-#define UWIRE_READ_RISING_EDGE		0x0000
-#define UWIRE_WRITE_FALLING_EDGE	0x0000
-#define UWIRE_WRITE_RISING_EDGE		0x0002
-#define UWIRE_CS_ACTIVE_LOW		0x0000
-#define UWIRE_CS_ACTIVE_HIGH		0x0004
-#define UWIRE_FREQ_DIV_2		0x0000
-#define UWIRE_FREQ_DIV_4		0x0008
-#define UWIRE_FREQ_DIV_8		0x0010
-#define UWIRE_CHK_READY			0x0020
-#define UWIRE_CLK_INVERTED		0x0040
-
-
-struct uwire_spi {
-	struct spi_bitbang	bitbang;
-	struct clk		*ck;
-};
-
-struct uwire_state {
-	unsigned	bits_per_word;
-	unsigned	div1_idx;
-};
-
-/* REVISIT compile time constant for idx_shift? */
-/*
- * Or, put it in a structure which is used throughout the driver;
- * that avoids having to issue two loads for each bit of static data.
- */
-static unsigned int uwire_idx_shift;
-static void __iomem *uwire_base;
-
-static inline void uwire_write_reg(int idx, u16 val)
-{
-	__raw_writew(val, uwire_base + (idx << uwire_idx_shift));
-}
-
-static inline u16 uwire_read_reg(int idx)
-{
-	return __raw_readw(uwire_base + (idx << uwire_idx_shift));
-}
-
-static inline void omap_uwire_configure_mode(u8 cs, unsigned long flags)
-{
-	u16	w, val = 0;
-	int	shift, reg;
-
-	if (flags & UWIRE_CLK_INVERTED)
-		val ^= 0x03;
-	val = flags & 0x3f;
-	if (cs & 1)
-		shift = 6;
-	else
-		shift = 0;
-	if (cs <= 1)
-		reg = UWIRE_SR1;
-	else
-		reg = UWIRE_SR2;
-
-	w = uwire_read_reg(reg);
-	w &= ~(0x3f << shift);
-	w |= val << shift;
-	uwire_write_reg(reg, w);
-}
-
-static int wait_uwire_csr_flag(u16 mask, u16 val, int might_not_catch)
-{
-	u16 w;
-	int c = 0;
-	unsigned long max_jiffies = jiffies + HZ;
-
-	for (;;) {
-		w = uwire_read_reg(UWIRE_CSR);
-		if ((w & mask) == val)
-			break;
-		if (time_after(jiffies, max_jiffies)) {
-			printk(KERN_ERR "%s: timeout. reg=%#06x "
-					"mask=%#06x val=%#06x\n",
-			       __func__, w, mask, val);
-			return -1;
-		}
-		c++;
-		if (might_not_catch && c > 64)
-			break;
-	}
-	return 0;
-}
-
-static void uwire_set_clk1_div(int div1_idx)
-{
-	u16 w;
-
-	w = uwire_read_reg(UWIRE_SR3);
-	w &= ~(0x03 << 1);
-	w |= div1_idx << 1;
-	uwire_write_reg(UWIRE_SR3, w);
-}
-
-static void uwire_chipselect(struct spi_device *spi, int value)
-{
-	struct	uwire_state *ust = spi->controller_state;
-	u16	w;
-	int	old_cs;
-
-
-	BUG_ON(wait_uwire_csr_flag(CSRB, 0, 0));
-
-	w = uwire_read_reg(UWIRE_CSR);
-	old_cs = (w >> 10) & 0x03;
-	if (value == BITBANG_CS_INACTIVE || old_cs != spi->chip_select) {
-		/* Deselect this CS, or the previous CS */
-		w &= ~CS_CMD;
-		uwire_write_reg(UWIRE_CSR, w);
-	}
-	/* activate specfied chipselect */
-	if (value == BITBANG_CS_ACTIVE) {
-		uwire_set_clk1_div(ust->div1_idx);
-		/* invert clock? */
-		if (spi->mode & SPI_CPOL)
-			uwire_write_reg(UWIRE_SR4, 1);
-		else
-			uwire_write_reg(UWIRE_SR4, 0);
-
-		w = spi->chip_select << 10;
-		w |= CS_CMD;
-		uwire_write_reg(UWIRE_CSR, w);
-	}
-}
-
-static int uwire_txrx(struct spi_device *spi, struct spi_transfer *t)
-{
-	struct uwire_state *ust = spi->controller_state;
-	unsigned	len = t->len;
-	unsigned	bits = ust->bits_per_word;
-	unsigned	bytes;
-	u16		val, w;
-	int		status = 0;
-
-	if (!t->tx_buf && !t->rx_buf)
-		return 0;
-
-	/* Microwire doesn't read and write concurrently */
-	if (t->tx_buf && t->rx_buf)
-		return -EPERM;
-
-	w = spi->chip_select << 10;
-	w |= CS_CMD;
-
-	if (t->tx_buf) {
-		const u8	*buf = t->tx_buf;
-
-		/* NOTE:  DMA could be used for TX transfers */
-
-		/* write one or two bytes at a time */
-		while (len >= 1) {
-			/* tx bit 15 is first sent; we byteswap multibyte words
-			 * (msb-first) on the way out from memory.
-			 */
-			val = *buf++;
-			if (bits > 8) {
-				bytes = 2;
-				val |= *buf++ << 8;
-			} else
-				bytes = 1;
-			val <<= 16 - bits;
-
-#ifdef	VERBOSE
-			pr_debug("%s: write-%d =%04x\n",
-					dev_name(&spi->dev), bits, val);
-#endif
-			if (wait_uwire_csr_flag(CSRB, 0, 0))
-				goto eio;
-
-			uwire_write_reg(UWIRE_TDR, val);
-
-			/* start write */
-			val = START | w | (bits << 5);
-
-			uwire_write_reg(UWIRE_CSR, val);
-			len -= bytes;
-
-			/* Wait till write actually starts.
-			 * This is needed with MPU clock 60+ MHz.
-			 * REVISIT: we may not have time to catch it...
-			 */
-			if (wait_uwire_csr_flag(CSRB, CSRB, 1))
-				goto eio;
-
-			status += bytes;
-		}
-
-		/* REVISIT:  save this for later to get more i/o overlap */
-		if (wait_uwire_csr_flag(CSRB, 0, 0))
-			goto eio;
-
-	} else if (t->rx_buf) {
-		u8		*buf = t->rx_buf;
-
-		/* read one or two bytes at a time */
-		while (len) {
-			if (bits > 8) {
-				bytes = 2;
-			} else
-				bytes = 1;
-
-			/* start read */
-			val = START | w | (bits << 0);
-			uwire_write_reg(UWIRE_CSR, val);
-			len -= bytes;
-
-			/* Wait till read actually starts */
-			(void) wait_uwire_csr_flag(CSRB, CSRB, 1);
-
-			if (wait_uwire_csr_flag(RDRB | CSRB,
-						RDRB, 0))
-				goto eio;
-
-			/* rx bit 0 is last received; multibyte words will
-			 * be properly byteswapped on the way to memory.
-			 */
-			val = uwire_read_reg(UWIRE_RDR);
-			val &= (1 << bits) - 1;
-			*buf++ = (u8) val;
-			if (bytes == 2)
-				*buf++ = val >> 8;
-			status += bytes;
-#ifdef	VERBOSE
-			pr_debug("%s: read-%d =%04x\n",
-					dev_name(&spi->dev), bits, val);
-#endif
-
-		}
-	}
-	return status;
-eio:
-	return -EIO;
-}
-
-static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
-{
-	struct uwire_state	*ust = spi->controller_state;
-	struct uwire_spi	*uwire;
-	unsigned		flags = 0;
-	unsigned		bits;
-	unsigned		hz;
-	unsigned long		rate;
-	int			div1_idx;
-	int			div1;
-	int			div2;
-	int			status;
-
-	uwire = spi_master_get_devdata(spi->master);
-
-	if (spi->chip_select > 3) {
-		pr_debug("%s: cs%d?\n", dev_name(&spi->dev), spi->chip_select);
-		status = -ENODEV;
-		goto done;
-	}
-
-	bits = spi->bits_per_word;
-	if (t != NULL && t->bits_per_word)
-		bits = t->bits_per_word;
-
-	if (bits > 16) {
-		pr_debug("%s: wordsize %d?\n", dev_name(&spi->dev), bits);
-		status = -ENODEV;
-		goto done;
-	}
-	ust->bits_per_word = bits;
-
-	/* mode 0..3, clock inverted separately;
-	 * standard nCS signaling;
-	 * don't treat DI=high as "not ready"
-	 */
-	if (spi->mode & SPI_CS_HIGH)
-		flags |= UWIRE_CS_ACTIVE_HIGH;
-
-	if (spi->mode & SPI_CPOL)
-		flags |= UWIRE_CLK_INVERTED;
-
-	switch (spi->mode & (SPI_CPOL | SPI_CPHA)) {
-	case SPI_MODE_0:
-	case SPI_MODE_3:
-		flags |= UWIRE_WRITE_FALLING_EDGE | UWIRE_READ_RISING_EDGE;
-		break;
-	case SPI_MODE_1:
-	case SPI_MODE_2:
-		flags |= UWIRE_WRITE_RISING_EDGE | UWIRE_READ_FALLING_EDGE;
-		break;
-	}
-
-	/* assume it's already enabled */
-	rate = clk_get_rate(uwire->ck);
-
-	hz = spi->max_speed_hz;
-	if (t != NULL && t->speed_hz)
-		hz = t->speed_hz;
-
-	if (!hz) {
-		pr_debug("%s: zero speed?\n", dev_name(&spi->dev));
-		status = -EINVAL;
-		goto done;
-	}
-
-	/* F_INT = mpu_xor_clk / DIV1 */
-	for (div1_idx = 0; div1_idx < 4; div1_idx++) {
-		switch (div1_idx) {
-		case 0:
-			div1 = 2;
-			break;
-		case 1:
-			div1 = 4;
-			break;
-		case 2:
-			div1 = 7;
-			break;
-		default:
-		case 3:
-			div1 = 10;
-			break;
-		}
-		div2 = (rate / div1 + hz - 1) / hz;
-		if (div2 <= 8)
-			break;
-	}
-	if (div1_idx == 4) {
-		pr_debug("%s: lowest clock %ld, need %d\n",
-			dev_name(&spi->dev), rate / 10 / 8, hz);
-		status = -EDOM;
-		goto done;
-	}
-
-	/* we have to cache this and reset in uwire_chipselect as this is a
-	 * global parameter and another uwire device can change it under
-	 * us */
-	ust->div1_idx = div1_idx;
-	uwire_set_clk1_div(div1_idx);
-
-	rate /= div1;
-
-	switch (div2) {
-	case 0:
-	case 1:
-	case 2:
-		flags |= UWIRE_FREQ_DIV_2;
-		rate /= 2;
-		break;
-	case 3:
-	case 4:
-		flags |= UWIRE_FREQ_DIV_4;
-		rate /= 4;
-		break;
-	case 5:
-	case 6:
-	case 7:
-	case 8:
-		flags |= UWIRE_FREQ_DIV_8;
-		rate /= 8;
-		break;
-	}
-	omap_uwire_configure_mode(spi->chip_select, flags);
-	pr_debug("%s: uwire flags %02x, armxor %lu KHz, SCK %lu KHz\n",
-			__func__, flags,
-			clk_get_rate(uwire->ck) / 1000,
-			rate / 1000);
-	status = 0;
-done:
-	return status;
-}
-
-static int uwire_setup(struct spi_device *spi)
-{
-	struct uwire_state *ust = spi->controller_state;
-
-	if (ust == NULL) {
-		ust = kzalloc(sizeof(*ust), GFP_KERNEL);
-		if (ust == NULL)
-			return -ENOMEM;
-		spi->controller_state = ust;
-	}
-
-	return uwire_setup_transfer(spi, NULL);
-}
-
-static void uwire_cleanup(struct spi_device *spi)
-{
-	kfree(spi->controller_state);
-}
-
-static void uwire_off(struct uwire_spi *uwire)
-{
-	uwire_write_reg(UWIRE_SR3, 0);
-	clk_disable(uwire->ck);
-	clk_put(uwire->ck);
-	spi_master_put(uwire->bitbang.master);
-}
-
-static int __init uwire_probe(struct platform_device *pdev)
-{
-	struct spi_master	*master;
-	struct uwire_spi	*uwire;
-	int			status;
-
-	master = spi_alloc_master(&pdev->dev, sizeof *uwire);
-	if (!master)
-		return -ENODEV;
-
-	uwire = spi_master_get_devdata(master);
-
-	uwire_base = ioremap(UWIRE_BASE_PHYS, UWIRE_IO_SIZE);
-	if (!uwire_base) {
-		dev_dbg(&pdev->dev, "can't ioremap UWIRE\n");
-		spi_master_put(master);
-		return -ENOMEM;
-	}
-
-	dev_set_drvdata(&pdev->dev, uwire);
-
-	uwire->ck = clk_get(&pdev->dev, "fck");
-	if (IS_ERR(uwire->ck)) {
-		status = PTR_ERR(uwire->ck);
-		dev_dbg(&pdev->dev, "no functional clock?\n");
-		spi_master_put(master);
-		return status;
-	}
-	clk_enable(uwire->ck);
-
-	if (cpu_is_omap7xx())
-		uwire_idx_shift = 1;
-	else
-		uwire_idx_shift = 2;
-
-	uwire_write_reg(UWIRE_SR3, 1);
-
-	/* the spi->mode bits understood by this driver: */
-	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
-
-	master->flags = SPI_MASTER_HALF_DUPLEX;
-
-	master->bus_num = 2;	/* "official" */
-	master->num_chipselect = 4;
-	master->setup = uwire_setup;
-	master->cleanup = uwire_cleanup;
-
-	uwire->bitbang.master = master;
-	uwire->bitbang.chipselect = uwire_chipselect;
-	uwire->bitbang.setup_transfer = uwire_setup_transfer;
-	uwire->bitbang.txrx_bufs = uwire_txrx;
-
-	status = spi_bitbang_start(&uwire->bitbang);
-	if (status < 0) {
-		uwire_off(uwire);
-		iounmap(uwire_base);
-	}
-	return status;
-}
-
-static int __exit uwire_remove(struct platform_device *pdev)
-{
-	struct uwire_spi	*uwire = dev_get_drvdata(&pdev->dev);
-	int			status;
-
-	// FIXME remove all child devices, somewhere ...
-
-	status = spi_bitbang_stop(&uwire->bitbang);
-	uwire_off(uwire);
-	iounmap(uwire_base);
-	return status;
-}
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:omap_uwire");
-
-static struct platform_driver uwire_driver = {
-	.driver = {
-		.name		= "omap_uwire",
-		.owner		= THIS_MODULE,
-	},
-	.remove		= __exit_p(uwire_remove),
-	// suspend ... unuse ck
-	// resume ... use ck
-};
-
-static int __init omap_uwire_init(void)
-{
-	/* FIXME move these into the relevant board init code. also, include
-	 * H3 support; it uses tsc2101 like H2 (on a different chipselect).
-	 */
-
-	if (machine_is_omap_h2()) {
-		/* defaults: W21 SDO, U18 SDI, V19 SCL */
-		omap_cfg_reg(N14_1610_UWIRE_CS0);
-		omap_cfg_reg(N15_1610_UWIRE_CS1);
-	}
-	if (machine_is_omap_perseus2()) {
-		/* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */
-		int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000;
-		omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9);
-	}
-
-	return platform_driver_probe(&uwire_driver, uwire_probe);
-}
-
-static void __exit omap_uwire_exit(void)
-{
-	platform_driver_unregister(&uwire_driver);
-}
-
-subsys_initcall(omap_uwire_init);
-module_exit(omap_uwire_exit);
-
-MODULE_LICENSE("GPL");
-