diff options
| author | Tony Lindgren <tony@atomide.com> | 2010-03-01 14:19:05 -0800 |
|---|---|---|
| committer | Tony Lindgren <tony@atomide.com> | 2010-03-01 14:19:05 -0800 |
| commit | d702d12167a2c05a346f49aac7a311d597762495 (patch) | |
| tree | baae42c299cce34d6df24b5d01f8b1d0b481bd9a /drivers/spi/Kconfig | |
| parent | 9418c65f9bd861d0f7e39aab9cfb3aa6f2275d11 (diff) | |
| parent | ac0f6f927db539e03e1f3f61bcd4ed57d5cde7a9 (diff) | |
Merge with mainline to remove plat-omap/Kconfig conflict
Conflicts:
arch/arm/plat-omap/Kconfig
Diffstat (limited to 'drivers/spi/Kconfig')
| -rw-r--r-- | drivers/spi/Kconfig | 23 |
1 files changed, 22 insertions, 1 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 66c35d74a76..a191fa2be7c 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -100,6 +100,23 @@ config SPI_BUTTERFLY inexpensive battery powered microcontroller evaluation board. This same cable can be used to flash new firmware. +config SPI_COLDFIRE_QSPI + tristate "Freescale Coldfire QSPI controller" + depends on (M520x || M523x || M5249 || M527x || M528x || M532x) + help + This enables support for the Coldfire QSPI controller in master + mode. + + This driver can also be built as a module. If so, the module + will be called coldfire_qspi. + +config SPI_DAVINCI + tristate "SPI controller driver for DaVinci/DA8xx SoC's" + depends on SPI_MASTER && ARCH_DAVINCI + select SPI_BITBANG + help + SPI master controller for DaVinci and DA8xx SPI modules. + config SPI_GPIO tristate "GPIO-based bitbanging SPI Master" depends on GENERIC_GPIO @@ -308,7 +325,7 @@ config SPI_NUC900 # config SPI_DESIGNWARE - bool "DesignWare SPI controller core support" + tristate "DesignWare SPI controller core support" depends on SPI_MASTER help general driver for SPI controller core from DesignWare @@ -317,6 +334,10 @@ config SPI_DW_PCI tristate "PCI interface driver for DW SPI core" depends on SPI_DESIGNWARE && PCI +config SPI_DW_MMIO + tristate "Memory-mapped io interface driver for DW SPI core" + depends on SPI_DESIGNWARE && HAVE_CLK + # # There are lots of SPI device types, with sensors and memory # being probably the most widely used ones. |