Merge branch 'devel-stable' into devel

Conflicts:
	arch/arm/Kconfig
	arch/arm/include/asm/system.h
	arch/arm/mm/Kconfig

32 files changed, 78 insertions, 58 deletions

diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index ae0251ef6f4..78ed24bb6a3 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -35,6 +35,7 @@
 #include <linux/pm.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>
+#include <linux/gfp.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index c3db16b7afa..2b1ea3d4c4f 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -38,6 +38,7 @@
 #include <linux/serial_8250.h>
 #include <linux/nmi.h>
 #include <linux/mutex.h>
+#include <linux/slab.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
index 33149d982e8..d8c0ffbfa6e 100644
--- a/drivers/serial/8250_gsc.c
+++ b/drivers/serial/8250_gsc.c
@@ -16,7 +16,6 @@
 #include <linux/module.h>
 #include <linux/serial_core.h>
 #include <linux/signal.h>
-#include <linux/slab.h>
 #include <linux/types.h>
 
 #include <asm/hardware.h>
diff --git a/drivers/serial/8250_hp300.c b/drivers/serial/8250_hp300.c
index 0e1410f2c03..c13438c9301 100644
--- a/drivers/serial/8250_hp300.c
+++ b/drivers/serial/8250_hp300.c
@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <linux/dio.h>
 #include <linux/console.h>
+#include <linux/slab.h>
 #include <asm/io.h>
 
 #include "8250.h"
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index 24485cc62ff..4822cb50cd0 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -348,6 +348,8 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	{	"FUJ02E6",		0	},
 	/* Fujitsu Wacom 2FGT Tablet PC device */
 	{	"FUJ02E7",		0	},
+	/* Fujitsu Wacom 1FGT Tablet PC device */
+	{	"FUJ02E9",		0	},
 	/*
 	 * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in
 	 * disguise)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index f55c49475a8..5f3f03df92e 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -518,12 +518,13 @@ config SERIAL_S3C2412
 	  Serial port support for the Samsung S3C2412 and S3C2413 SoC
 
 config SERIAL_S3C2440
-	tristate "Samsung S3C2440/S3C2442 Serial port support"
-	depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442)
+	tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support"
+	depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416)
 	default y if CPU_S3C2440
 	default y if CPU_S3C2442
+	select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416
 	help
-	  Serial port support for the Samsung S3C2440 and S3C2442 SoC
+	  Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC
 
 config SERIAL_S3C24A0
 	tristate "Samsung S3C24A0 Serial port support"
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index e4b3c2c88bb..b09a638d051 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -47,6 +47,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
 #include <linux/clk.h>
+#include <linux/slab.h>
 
 #include <asm/io.h>
 
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index ce6c35333ff..743ebf5f16d 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -47,6 +47,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
 #include <linux/clk.h>
+#include <linux/slab.h>
 
 #include <asm/io.h>
 #include <asm/sizes.h>
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index fcf273e3f48..96f7e7484fe 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -14,6 +14,7 @@
 
 #include <linux/module.h>
 #include <linux/ioport.h>
+#include <linux/gfp.h>
 #include <linux/io.h>
 #include <linux/init.h>
 #include <linux/console.h>
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index 7c72888fbf9..c88f8ad3ff8 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -28,6 +28,7 @@
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/sysrq.h>
+#include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 1b94c56ec23..3fc1d66e32c 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -29,6 +29,7 @@
 
 #include <linux/module.h>
 #include <linux/tty.h>
+#include <linux/gfp.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/serial.h>
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index a9802e76b5f..814ac006393 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -30,6 +30,7 @@
 #include <linux/module.h>
 #include <linux/tty.h>
 #include <linux/ioport.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/console.h>
@@ -61,7 +62,7 @@ void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
 	void __iomem *pram;
 	unsigned long offset;
 	struct resource res;
-	unsigned long len;
+	resource_size_t len;
 
 	/* Don't remap parameter RAM if it has already been initialized
 	 * during console setup.
@@ -74,7 +75,7 @@ void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
 	if (of_address_to_resource(np, 1, &res))
 		return NULL;
 
-	len = 1 + res.end - res.start;
+	len = resource_size(&res);
 	pram = ioremap(res.start, len);
 	if (!pram)
 		return NULL;
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index e579d7a1807..4315b23590b 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -46,6 +46,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/rational.h>
+#include <linux/slab.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index 23ba6b40b3a..f164ba4eba0 100644
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -20,6 +20,7 @@
 #include <linux/pci.h>
 #include <linux/serial_core.h>
 #include <linux/ioc3.h>
+#include <linux/slab.h>
 
 /*
  * Interesting things about the ioc3
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index 836d9ab4f72..8ad28fc6492 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -22,6 +22,7 @@
 #include <linux/pci.h>
 #include <linux/ioc4.h>
 #include <linux/serial_core.h>
+#include <linux/slab.h>
 
 /*
  * interesting things about the ioc4
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index 12cb5e446a4..eaf54501411 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -26,6 +26,7 @@
  ***********************************************************************/
 #include <linux/moduleparam.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 
 #include "jsm.h"
 
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 5673ca9dfdc..7a4a914ecff 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -30,6 +30,7 @@
 #include <linux/serial_reg.h>
 #include <linux/delay.h>	/* For udelay */
 #include <linux/pci.h>
+#include <linux/slab.h>
 
 #include "jsm.h"
 
diff --git a/drivers/serial/max3100.c b/drivers/serial/max3100.c
index 3c30c56aa2e..3351c3bd59e 100644
--- a/drivers/serial/max3100.c
+++ b/drivers/serial/max3100.c
@@ -41,6 +41,7 @@
 #define MAX_MAX3100 4
 
 #include <linux/delay.h>
+#include <linux/slab.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c
index 7bb5fee639e..b5aaef965f2 100644
--- a/drivers/serial/mcf.c
+++ b/drivers/serial/mcf.c
@@ -263,6 +263,7 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios,
 	}
 
 	spin_lock_irqsave(&port->lock, flags);
+	uart_update_timeout(port, termios->c_cflag, baud);
 	writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
 	writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
 	writeb(MCFUART_UCR_CMDRESETMRPTR, port->membase + MCFUART_UCR);
@@ -379,6 +380,7 @@ static irqreturn_t mcf_interrupt(int irq, void *data)
 static void mcf_config_port(struct uart_port *port, int flags)
 {
 	port->type = PORT_MCF;
+	port->fifosize = MCFUART_TXFIFOSIZE;
 
 	/* Clear mask, so no surprise interrupts. */
 	writeb(0, port->membase + MCFUART_UIMR);
@@ -424,7 +426,7 @@ static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser)
 /*
  *	Define the basic serial functions we support.
  */
-static struct uart_ops mcf_uart_ops = {
+static const struct uart_ops mcf_uart_ops = {
 	.tx_empty	= mcf_tx_empty,
 	.get_mctrl	= mcf_get_mctrl,
 	.set_mctrl	= mcf_set_mctrl,
@@ -443,7 +445,7 @@ static struct uart_ops mcf_uart_ops = {
 	.verify_port	= mcf_verify_port,
 };
 
-static struct mcf_uart mcf_ports[3];
+static struct mcf_uart mcf_ports[4];
 
 #define	MCF_MAXPORTS	ARRAY_SIZE(mcf_ports)
 
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 3119fddaedb..a176ab4bd65 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -29,39 +29,6 @@
  * kind, whether express or implied.
  */
 
-/* Platform device Usage :
- *
- * Since PSCs can have multiple function, the correct driver for each one
- * is selected by calling mpc52xx_match_psc_function(...). The function
- * handled by this driver is "uart".
- *
- * The driver init all necessary registers to place the PSC in uart mode without
- * DCD. However, the pin multiplexing aren't changed and should be set either
- * by the bootloader or in the platform init code.
- *
- * The idx field must be equal to the PSC index (e.g. 0 for PSC1, 1 for PSC2,
- * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and
- * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly
- * fpr the console code : without this 1:1 mapping, at early boot time, when we
- * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it
- * will be mapped to.
- */
-
-/* OF Platform device Usage :
- *
- * This driver is only used for PSCs configured in uart mode.  The device
- * tree will have a node for each PSC with "mpc52xx-psc-uart" in the compatible
- * list.
- *
- * By default, PSC devices are enumerated in the order they are found.  However
- * a particular PSC number can be forces by adding 'device_no = <port#>'
- * to the device node.
- *
- * The driver init all necessary registers to place the PSC in uart mode without
- * DCD. However, the pin multiplexing aren't changed and should be set either
- * by the bootloader or in the platform init code.
- */
-
 #undef DEBUG
 
 #include <linux/device.h>
diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
index b5496c28e60..55e113a0be0 100644
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -70,6 +70,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/mv643xx.h>
 #include <linux/platform_device.h>
+#include <linux/gfp.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
index 7571aaa138b..9711e06a837 100644
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c
@@ -22,7 +22,6 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/console.h>
-#include <linux/slab.h>
 #include <linux/delay.h> /* for udelay */
 #include <linux/device.h>
 #include <asm/io.h>
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index cdf172eda2e..4abfebdb0fc 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -11,6 +11,7 @@
  */
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/of_platform.h>
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index f020de1cdd5..700e10833bf 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -54,7 +54,6 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/console.h>
-#include <linux/slab.h>
 #include <linux/adb.h>
 #include <linux/pmu.h>
 #include <linux/bitops.h>
@@ -753,8 +752,10 @@ static void pmz_break_ctl(struct uart_port *port, int break_state)
 		uap->curregs[R5] = new_reg;
 
 		/* NOTE: Not subject to 'transmitter active' rule. */
-		if (ZS_IS_ASLEEP(uap))
+		if (ZS_IS_ASLEEP(uap)) {
+			spin_unlock_irqrestore(&port->lock, flags);
 			return;
+		}
 		write_zsreg(uap, R5, uap->curregs[R5]);
 	}
 
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 56ee082157a..1102a39b44f 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -44,6 +44,7 @@
 #include <linux/serial_core.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 struct uart_pxa_port {
 	struct uart_port        port;
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index e91db4b3801..8cfa5b12ea7 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -105,6 +105,10 @@ struct serial_cfg_mem {
  * manfid 0x0160, 0x0104
  * This card appears to have a 14.7456MHz clock.
  */
+/* Generic Modem: MD55x (GPRS/EDGE) have
+ * Elan VPU16551 UART with 14.7456MHz oscillator
+ * manfid 0x015D, 0x4C45
+ */
 static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port)
 {
 	port->uartclk = 14745600;
@@ -196,6 +200,11 @@ static const struct serial_quirk quirks[] = {
 		.multi	= -1,
 		.setup	= quirk_setup_brainboxes_0104,
 	}, {
+		.manfid	= 0x015D,
+		.prodid	= 0x4C45,
+		.multi	= -1,
+		.setup	= quirk_setup_brainboxes_0104,
+	}, {
 		.manfid	= MANFID_IBM,
 		.prodid	= ~0,
 		.multi	= -1,
@@ -745,6 +754,7 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
 	PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index 2e71bbc04da..b1962025b1a 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -650,6 +650,7 @@ static struct console ks8695_console = {
 
 static int __init ks8695_console_init(void)
 {
+	add_preferred_console(SERIAL_KS8695_DEVNAME, 0, NULL);
 	register_console(&ks8695_console);
 	return 0;
 }
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 980f39449ee..8eb094c1f61 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -50,7 +50,7 @@
 #include <linux/list.h>
 #include <linux/dmaengine.h>
 #include <linux/scatterlist.h>
-#include <linux/timer.h>
+#include <linux/slab.h>
 
 #ifdef CONFIG_SUPERH
 #include <asm/sh_bios.h>
@@ -780,10 +780,6 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 	if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
 		ret = sci_br_interrupt(irq, ptr);
 
-	WARN_ONCE(ret == IRQ_NONE,
-		  "%s: %d IRQ %d, status %x, control %x\n", __func__,
-		  irq, port->line, ssr_status, scr_status);
-
 	return ret;
 }
 
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index fad67d33b0b..f70c49f915f 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -31,7 +31,9 @@
 # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721) || \
-      defined(CONFIG_ARCH_SHMOBILE)
+      defined(CONFIG_ARCH_SH7367) || \
+      defined(CONFIG_ARCH_SH7377) || \
+      defined(CONFIG_ARCH_SH7372)
 # define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define PORT_PTCR	   0xA405011EUL
 # define PORT_PVCR	   0xA4050122UL
@@ -94,7 +96,9 @@
 # define SCSCR_INIT(port)       0x0038  /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7724)
 # define SCIF_ORER              0x0001  /* overrun error bit */
-# define SCSCR_INIT(port)       0x0038  /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCSCR_INIT(port) ((port)->type == PORT_SCIFA ? \
+	0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \
+	0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ )
 #elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
 # define SCSPTR2 0xffe80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
@@ -197,6 +201,8 @@
     defined(CONFIG_CPU_SUBTYPE_SH7786)  || \
     defined(CONFIG_CPU_SUBTYPE_SHX3)
 #define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
+#define SCI_CTRL_FLAGS_REIE ((port)->type == PORT_SCIFA ? 0 : 8)
 #else
 #define SCI_CTRL_FLAGS_REIE 0
 #endif
@@ -230,7 +236,9 @@
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721) || \
-    defined(CONFIG_ARCH_SHMOBILE)
+    defined(CONFIG_ARCH_SH7367) || \
+    defined(CONFIG_ARCH_SH7377) || \
+    defined(CONFIG_ARCH_SH7372)
 # define SCIF_ORER    0x0200
 # define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
 # define SCIF_RFDC_MASK 0x007f
@@ -264,7 +272,9 @@
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721) || \
-    defined(CONFIG_ARCH_SHMOBILE)
+    defined(CONFIG_ARCH_SH7367) || \
+    defined(CONFIG_ARCH_SH7377) || \
+    defined(CONFIG_ARCH_SH7372)
 # define SCxSR_RDxF_CLEAR(port)	 (sci_in(port, SCxSR) & 0xfffc)
 # define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
 # define SCxSR_TDxE_CLEAR(port)	 (sci_in(port, SCxSR) & 0xffdf)
@@ -359,7 +369,10 @@
     SCI_OUT(sci_size, sci_offset, value);				\
   }
 
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_ARCH_SHMOBILE)
+#if defined(CONFIG_CPU_SH3) || \
+    defined(CONFIG_ARCH_SH7367) || \
+    defined(CONFIG_ARCH_SH7377) || \
+    defined(CONFIG_ARCH_SH7372)
 #if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
 #define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
 		                sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
@@ -370,7 +383,9 @@
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
       defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721) || \
-      defined(CONFIG_ARCH_SHMOBILE)
+      defined(CONFIG_ARCH_SH7367) || \
+      defined(CONFIG_ARCH_SH7377) || \
+      defined(CONFIG_ARCH_SH7372)
 #define SCIF_FNS(name, scif_offset, scif_size) \
   CPU_SCIF_FNS(name, scif_offset, scif_size)
 #else
@@ -406,7 +421,9 @@
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721) || \
-    defined(CONFIG_ARCH_SHMOBILE)
+    defined(CONFIG_ARCH_SH7367) || \
+    defined(CONFIG_ARCH_SH7377) || \
+    defined(CONFIG_ARCH_SH7372)
 
 SCIF_FNS(SCSMR,  0x00, 16)
 SCIF_FNS(SCBRR,  0x04,  8)
@@ -589,7 +606,9 @@ static inline int sci_rxd_in(struct uart_port *port)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
       defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721) || \
-      defined(CONFIG_ARCH_SHMOBILE)
+      defined(CONFIG_ARCH_SH7367) || \
+      defined(CONFIG_ARCH_SH7377) || \
+      defined(CONFIG_ARCH_SH7372)
 #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
       defined(CONFIG_CPU_SUBTYPE_SH7724)
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 170d3d68c8f..01f7731e59b 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -29,6 +29,7 @@
 #include <linux/serial.h>
 #include <linux/sysrq.h>
 #include <linux/console.h>
+#include <linux/slab.h>
 #ifdef CONFIG_SERIO
 #include <linux/serio.h>
 #endif
@@ -1453,8 +1454,10 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m
 	if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) {
 		err = sunsu_kbd_ms_init(up);
 		if (err) {
+			of_iounmap(&op->resource[0],
+				   up->port.membase, up->reg_size);
 			kfree(up);
-			goto out_unmap;
+			return err;
 		}
 		dev_set_drvdata(&op->dev, up);
 
diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c
index 7bf10264a6a..786ba85c170 100644
--- a/drivers/serial/timbuart.c
+++ b/drivers/serial/timbuart.c
@@ -26,6 +26,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/ioport.h>
+#include <linux/slab.h>
 
 #include "timbuart.h"
 
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 465f2fae102..074904912f6 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -20,6 +20,7 @@
 
 #include <linux/module.h>
 #include <linux/serial.h>
+#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
 #include <linux/of_platform.h>