Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

40 files changed, 4832 insertions, 306 deletions

diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 8681f134505..d89aa38c5cf 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -216,7 +216,7 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
 			struct ktermios *old)
 {
 	unsigned long flags;
-	unsigned int baud, quot, h_lcr;
+	unsigned int baud, quot, h_lcr, b;
 
 	/*
 	 * We don't support modem control lines.
@@ -234,12 +234,8 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
 	 */
 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 
 	quot = uart_get_divisor(port, baud);
-
-	if (port->state && port->state->port.tty) {
-		struct tty_struct *tty = port->state->port.tty;
-		unsigned int b = port->uartclk / (16 * quot);
-		tty_encode_baud_rate(tty, b, b);
-	}
+	b = port->uartclk / (16 * quot);
+	tty_termios_encode_baud_rate(termios, b, b);
 
 	switch (termios->c_cflag & CSIZE) {
 	case CS5:
diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index 30463862603..7356a56ac45 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -78,10 +78,6 @@ struct m68k_serial *m68k_consinfo = 0;
 
 #define M68K_CLOCK (16667000) /* FIXME: 16MHz is likely wrong */
 
-#ifdef CONFIG_CONSOLE
-extern wait_queue_head_t keypress_wait; 
-#endif
-
 struct tty_driver *serial_driver;
 
 /* number of characters left in xmit buffer before we ask for more */
@@ -102,19 +98,13 @@ static void change_speed(struct m68k_serial *info);
  *	Setup for console. Argument comes from the boot command line.
  */
 
-#if defined(CONFIG_M68EZ328ADS) || defined(CONFIG_ALMA_ANS) || defined(CONFIG_DRAGONIXVZ)
-#define	CONSOLE_BAUD_RATE	115200
-#define	DEFAULT_CBAUD		B115200
-#else
-	/* (es) */
-	/* note: this is messy, but it works, again, perhaps defined somewhere else?*/
-	#ifdef CONFIG_M68VZ328
-	#define CONSOLE_BAUD_RATE	19200
-	#define DEFAULT_CBAUD		B19200
-	#endif
-	/* (/es) */
+/* note: this is messy, but it works, again, perhaps defined somewhere else?*/
+#ifdef CONFIG_M68VZ328
+#define CONSOLE_BAUD_RATE	19200
+#define DEFAULT_CBAUD		B19200
 #endif
 
+
 #ifndef CONSOLE_BAUD_RATE
 #define	CONSOLE_BAUD_RATE	9600
 #define	DEFAULT_CBAUD		B9600
@@ -300,10 +290,6 @@ static void receive_chars(struct m68k_serial *info, unsigned short rx)
 				return;
 #endif /* CONFIG_MAGIC_SYSRQ */
 			}
-			/* It is a 'keyboard interrupt' ;-) */
-#ifdef CONFIG_CONSOLE
-			wake_up(&keypress_wait);
-#endif			
 		}
 
 		if(!tty)
@@ -1243,7 +1229,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 			retval = -ERESTARTSYS;
 			break;
 		}
+		tty_unlock();
 		schedule();
+		tty_lock();
 	}
 	current->state = TASK_RUNNING;
 	remove_wait_queue(&info->open_wait, &wait);
diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
index 768612f8e41..0dff3bbddc8 100644
--- a/drivers/serial/68360serial.c
+++ b/drivers/serial/68360serial.c
@@ -1705,7 +1705,6 @@ static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout)
 	printk("jiff=%lu...", jiffies);
 #endif
 
-	lock_kernel();
 	/* We go through the loop at least once because we can't tell
 	 * exactly when the last character exits the shifter.  There can
 	 * be at least two characters waiting to be sent after the buffers
@@ -1734,7 +1733,6 @@ static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout)
 			bdp--;
 	} while (bdp->status & BD_SC_READY);
 	current->state = TASK_RUNNING;
-	unlock_kernel();
 #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
 	printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
 #endif
@@ -1862,7 +1860,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 		printk("block_til_ready blocking: ttys%d, count = %d\n",
 		       info->line, state->count);
 #endif
+		tty_unlock();
 		schedule();
+		tty_lock();
 	}
 	current->state = TASK_RUNNING;
 	remove_wait_queue(&info->open_wait, &wait);
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 09ef57034c9..24110f6f61e 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -241,7 +241,7 @@ static const struct serial8250_config uart_config[] = {
 		.fifo_size	= 128,
 		.tx_loadsz	= 128,
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
-		.flags		= UART_CAP_FIFO,
+		.flags		= UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
 	},
 	[PORT_16654] = {
 		.name		= "ST16654",
@@ -300,6 +300,13 @@ static const struct serial8250_config uart_config[] = {
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
 		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
 	},
+	[PORT_U6_16550A] = {
+		.name		= "U6_16550A",
+		.fifo_size	= 64,
+		.tx_loadsz	= 64,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
+	},
 };
 
 #if defined(CONFIG_MIPS_ALCHEMY)
@@ -1070,6 +1077,15 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 		DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 ");
 	}
 	serial_outp(up, UART_IER, iersave);
+
+	/*
+	 * We distinguish between 16550A and U6 16550A by counting
+	 * how many bytes are in the FIFO.
+	 */
+	if (up->port.type == PORT_16550A && size_fifo(up) == 64) {
+		up->port.type = PORT_U6_16550A;
+		up->capabilities |= UART_CAP_AFE;
+	}
 }
 
 /*
@@ -2224,9 +2240,9 @@ static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int
 	return quot;
 }
 
-static void
-serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
-		       struct ktermios *old)
+void
+serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
+		          struct ktermios *old)
 {
 	struct uart_8250_port *up = (struct uart_8250_port *)port;
 	unsigned char cval, fcr = 0;
@@ -2402,16 +2418,22 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
 	if (tty_termios_baud_rate(termios))
 		tty_termios_encode_baud_rate(termios, baud, baud);
 }
+EXPORT_SYMBOL(serial8250_do_set_termios);
 
 static void
-serial8250_set_ldisc(struct uart_port *port)
+serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
+		       struct ktermios *old)
 {
-	int line = port->line;
-
-	if (line >= port->state->port.tty->driver->num)
-		return;
+	if (port->set_termios)
+		port->set_termios(port, termios, old);
+	else
+		serial8250_do_set_termios(port, termios, old);
+}
 
-	if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+static void
+serial8250_set_ldisc(struct uart_port *port, int new)
+{
+	if (new == N_PPS) {
 		port->flags |= UPF_HARDPPS_CD;
 		serial8250_enable_ms(port);
 	} else
@@ -2987,6 +3009,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
 		port.type		= p->type;
 		port.serial_in		= p->serial_in;
 		port.serial_out		= p->serial_out;
+		port.set_termios	= p->set_termios;
 		port.dev		= &dev->dev;
 		port.irqflags		|= irqflag;
 		ret = serial8250_register_port(&port);
@@ -3150,6 +3173,9 @@ int serial8250_register_port(struct uart_port *port)
 			uart->port.serial_in = port->serial_in;
 		if (port->serial_out)
 			uart->port.serial_out = port->serial_out;
+		/*  Possibly override set_termios call */
+		if (port->set_termios)
+			uart->port.set_termios = port->set_termios;
 
 		ret = uart_add_one_port(&serial8250_reg, &uart->port);
 		if (ret == 0)
diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c
index f279745e9fe..b745792ec25 100644
--- a/drivers/serial/8250_early.c
+++ b/drivers/serial/8250_early.c
@@ -19,9 +19,11 @@
  * The user can specify the device directly, e.g.,
  *	earlycon=uart8250,io,0x3f8,9600n8
  *	earlycon=uart8250,mmio,0xff5e0000,115200n8
+ *	earlycon=uart8250,mmio32,0xff5e0000,115200n8
  * or
  *	console=uart8250,io,0x3f8,9600n8
  *	console=uart8250,mmio,0xff5e0000,115200n8
+ *	console=uart8250,mmio32,0xff5e0000,115200n8
  */
 
 #include <linux/tty.h>
@@ -48,18 +50,31 @@ static struct early_serial8250_device early_device;
 
 static unsigned int __init serial_in(struct uart_port *port, int offset)
 {
-	if (port->iotype == UPIO_MEM)
+	switch (port->iotype) {
+	case UPIO_MEM:
 		return readb(port->membase + offset);
-	else
+	case UPIO_MEM32:
+		return readl(port->membase + (offset << 2));
+	case UPIO_PORT:
 		return inb(port->iobase + offset);
+	default:
+		return 0;
+	}
 }
 
 static void __init serial_out(struct uart_port *port, int offset, int value)
 {
-	if (port->iotype == UPIO_MEM)
+	switch (port->iotype) {
+	case UPIO_MEM:
 		writeb(value, port->membase + offset);
-	else
+		break;
+	case UPIO_MEM32:
+		writel(value, port->membase + (offset << 2));
+		break;
+	case UPIO_PORT:
 		outb(value, port->iobase + offset);
+		break;
+	}
 }
 
 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
@@ -137,15 +152,21 @@ static int __init parse_options(struct early_serial8250_device *device,
 								char *options)
 {
 	struct uart_port *port = &device->port;
-	int mmio, length;
+	int mmio, mmio32, length;
 
 	if (!options)
 		return -ENODEV;
 
 	port->uartclk = BASE_BAUD * 16;
-	if (!strncmp(options, "mmio,", 5)) {
-		port->iotype = UPIO_MEM;
-		port->mapbase = simple_strtoul(options + 5, &options, 0);
+
+	mmio = !strncmp(options, "mmio,", 5);
+	mmio32 = !strncmp(options, "mmio32,", 7);
+	if (mmio || mmio32) {
+		port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32);
+		port->mapbase = simple_strtoul(options + (mmio ? 5 : 7),
+					       &options, 0);
+		if (mmio32)
+			port->regshift = 2;
 #ifdef CONFIG_FIX_EARLYCON_MEM
 		set_fixmap_nocache(FIX_EARLYCON_MEM_BASE,
 					port->mapbase & PAGE_MASK);
@@ -157,11 +178,10 @@ static int __init parse_options(struct early_serial8250_device *device,
 		if (!port->membase) {
 			printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n",
 				__func__,
-			       (unsigned long long)port->mapbase);
+			       (unsigned long long) port->mapbase);
 			return -ENOMEM;
 		}
 #endif
-		mmio = 1;
 	} else if (!strncmp(options, "io,", 3)) {
 		port->iotype = UPIO_PORT;
 		port->iobase = simple_strtoul(options + 3, &options, 0);
@@ -181,11 +201,18 @@ static int __init parse_options(struct early_serial8250_device *device,
 			device->baud);
 	}
 
-	printk(KERN_INFO "Early serial console at %s 0x%llx (options '%s')\n",
-		mmio ? "MMIO" : "I/O port",
-		mmio ? (unsigned long long) port->mapbase
-		     : (unsigned long long) port->iobase,
-		device->options);
+	if (mmio || mmio32)
+		printk(KERN_INFO
+		       "Early serial console at MMIO%s 0x%llu (options '%s')\n",
+			mmio32 ? "32" : "",
+			(unsigned long long)port->mapbase,
+			device->options);
+	else
+		printk(KERN_INFO
+		      "Early serial console at I/O port 0x%lu (options '%s')\n",
+			port->iobase,
+			device->options);
+
 	return 0;
 }
 
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 746a44621d9..53be4d35a0a 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -994,6 +994,7 @@ static int skip_tx_en_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_TITAN_800E	0xA014
 #define PCI_DEVICE_ID_TITAN_200EI	0xA016
 #define PCI_DEVICE_ID_TITAN_200EISI	0xA017
+#define PCI_DEVICE_ID_OXSEMI_16PCI958	0x9538
 
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
@@ -1542,6 +1543,8 @@ enum pci_board_num_t {
 	pbn_b2_4_921600,
 	pbn_b2_8_921600,
 
+	pbn_b2_8_1152000,
+
 	pbn_b2_bt_1_115200,
 	pbn_b2_bt_2_115200,
 	pbn_b2_bt_4_115200,
@@ -1960,6 +1963,13 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 		.uart_offset	= 8,
 	},
 
+	[pbn_b2_8_1152000] = {
+		.flags		= FL_BASE2,
+		.num_ports	= 8,
+		.base_baud	= 1152000,
+		.uart_offset	= 8,
+	},
+
 	[pbn_b2_bt_1_115200] = {
 		.flags		= FL_BASE2|FL_BASE_BARS,
 		.num_ports	= 1,
@@ -2875,6 +2885,9 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_bt_2_921600 },
+	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958,
+		PCI_ANY_ID , PCI_ANY_ID, 0, 0,
+		pbn_b2_8_1152000 },
 
 	/*
 	 * Oxford Semiconductor Inc. Tornado PCI express device range.
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index e437ce8c174..12900f7083b 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -536,12 +536,13 @@ config SERIAL_S3C6400
 
 config SERIAL_S5PV210
 	tristate "Samsung S5PV210 Serial port support"
-	depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442)
-	select SERIAL_SAMSUNG_UARTS_4 if CPU_S5PV210
+	depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442 || CPU_S5PV310)
+	select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_S5PV310)
 	default y
 	help
 	  Serial port support for Samsung's S5P Family of SoC's
 
+
 config SERIAL_MAX3100
 	tristate "MAX3100 support"
 	depends on SPI
@@ -549,6 +550,22 @@ config SERIAL_MAX3100
 	help
 	  MAX3100 chip support
 
+config SERIAL_MAX3107
+	tristate "MAX3107 support"
+	depends on SPI
+	select SERIAL_CORE
+	help
+	  MAX3107 chip support
+
+config SERIAL_MAX3107_AAVA
+	tristate "MAX3107 AAVA platform support"
+	depends on X86_MRST && SERIAL_MAX3107 && GPIOLIB
+	select SERIAL_CORE
+	help
+	  Support for the MAX3107 chip configuration found on the AAVA
+	  platform. Includes the extra initialisation and GPIO support
+	  neded for this device.
+
 config SERIAL_DZ
 	bool "DECstation DZ serial driver"
 	depends on MACH_DECSTATION && 32BIT
@@ -690,6 +707,33 @@ config SERIAL_SA1100_CONSOLE
 	  your boot loader (lilo or loadlin) about how to pass options to the
 	  kernel at boot time.)
 
+config SERIAL_MRST_MAX3110
+	tristate "SPI UART driver for Max3110"
+	depends on SPI_DW_PCI
+	select SERIAL_CORE
+	select SERIAL_CORE_CONSOLE
+	help
+	  This is the UART protocol driver for the MAX3110 device on
+	  the Intel Moorestown platform. On other systems use the max3100
+	  driver.
+
+config MRST_MAX3110_IRQ
+	boolean "Enable GPIO IRQ for Max3110 over Moorestown"
+	default n
+	depends on SERIAL_MRST_MAX3110 && GPIO_LANGWELL
+	help
+	  This has to be enabled after Moorestown GPIO driver is loaded
+
+config SERIAL_MFD_HSU
+	tristate "Medfield High Speed UART support"
+	depends on PCI
+	select SERIAL_CORE
+
+config SERIAL_MFD_HSU_CONSOLE
+	boolean "Medfile HSU serial console support"
+	depends on SERIAL_MFD_HSU=y
+	select SERIAL_CORE_CONSOLE
+
 config SERIAL_BFIN
 	tristate "Blackfin serial port support"
 	depends on BLACKFIN
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 208a85572c3..1ca4fd599ff 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -46,6 +46,8 @@ obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
 obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
 obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
 obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
+obj-$(CONFIG_SERIAL_MAX3107) += max3107.o
+obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o
 obj-$(CONFIG_SERIAL_68328) += 68328serial.o
@@ -84,3 +86,5 @@ obj-$(CONFIG_SERIAL_TIMBERDALE)	+= timbuart.o
 obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
 obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
 obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o
+obj-$(CONFIG_SERIAL_MRST_MAX3110)	+= mrst_max3110.o
+obj-$(CONFIG_SERIAL_MFD_HSU)	+= mfd.o
diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c
index 0f1189605d2..f8d8a00554d 100644
--- a/drivers/serial/altera_uart.c
+++ b/drivers/serial/altera_uart.c
@@ -394,7 +394,7 @@ int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp)
 static void altera_uart_console_putc(struct uart_port *port, const char c)
 {
 	while (!(readl(port->membase + ALTERA_UART_STATUS_REG) &
-	         ALTERA_UART_STATUS_TRDY_MSK))
+		 ALTERA_UART_STATUS_TRDY_MSK))
 		cpu_relax();
 
 	writel(c, port->membase + ALTERA_UART_TXDATA_REG);
diff --git a/drivers/serial/apbuart.c b/drivers/serial/apbuart.c
index 0099b8692b6..cc01c650a14 100644
--- a/drivers/serial/apbuart.c
+++ b/drivers/serial/apbuart.c
@@ -551,7 +551,7 @@ static struct uart_driver grlib_apbuart_driver = {
 /* OF Platform Driver                                                       */
 /* ======================================================================== */
 
-static int __devinit apbuart_probe(struct of_device *op,
+static int __devinit apbuart_probe(struct platform_device *op,
 				   const struct of_device_id *match)
 {
 	int i = -1;
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index a182def7007..3892666b5fb 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -217,7 +217,8 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
 	if (rs485conf->flags & SER_RS485_ENABLED) {
 		dev_dbg(port->dev, "Setting UART to RS485\n");
 		atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
-		UART_PUT_TTGR(port, rs485conf->delay_rts_before_send);
+		if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND)
+			UART_PUT_TTGR(port, rs485conf->delay_rts_after_send);
 		mode |= ATMEL_US_USMODE_RS485;
 	} else {
 		dev_dbg(port->dev, "Setting UART to RS232\n");
@@ -292,7 +293,9 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
 
 	if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
 		dev_dbg(port->dev, "Setting UART to RS485\n");
-		UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send);
+		if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
+			UART_PUT_TTGR(port,
+					atmel_port->rs485.delay_rts_after_send);
 		mode |= ATMEL_US_USMODE_RS485;
 	} else {
 		dev_dbg(port->dev, "Setting UART to RS232\n");
@@ -1211,7 +1214,9 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
 		dev_dbg(port->dev, "Setting UART to RS485\n");
-		UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_before_send);
+		if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
+			UART_PUT_TTGR(port,
+					atmel_port->rs485.delay_rts_after_send);
 		mode |= ATMEL_US_USMODE_RS485;
 	} else {
 		dev_dbg(port->dev, "Setting UART to RS232\n");
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 511cbf68787..a9eff2b18ea 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -957,15 +957,12 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
  * Enable the IrDA function if tty->ldisc.num is N_IRDA.
  * In other cases, disable IrDA function.
  */
-static void bfin_serial_set_ldisc(struct uart_port *port)
+static void bfin_serial_set_ldisc(struct uart_port *port, int ld)
 {
 	int line = port->line;
 	unsigned short val;
 
-	if (line >= port->state->port.tty->driver->num)
-		return;
-
-	switch (port->state->port.tty->termios->c_line) {
+	switch (ld) {
 	case N_IRDA:
 		val = UART_GET_GCTL(&bfin_serial_ports[line]);
 		val |= (IREN | RPOLC);
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 6016179db53..f2b8adcc6c9 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -1340,7 +1340,7 @@ static struct uart_driver cpm_reg = {
 
 static int probe_index;
 
-static int __devinit cpm_uart_probe(struct of_device *ofdev,
+static int __devinit cpm_uart_probe(struct platform_device *ofdev,
                                     const struct of_device_id *match)
 {
 	int index = probe_index++;
@@ -1364,7 +1364,7 @@ static int __devinit cpm_uart_probe(struct of_device *ofdev,
 	return uart_add_one_port(&cpm_reg, &pinfo->port);
 }
 
-static int __devexit cpm_uart_remove(struct of_device *ofdev)
+static int __devexit cpm_uart_remove(struct platform_device *ofdev)
 {
 	struct uart_cpm_port *pinfo = dev_get_drvdata(&ofdev->dev);
 	return uart_remove_one_port(&cpm_reg, &pinfo->port);
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 31f172397af..c856905bb3b 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -3724,6 +3724,17 @@ rs_ioctl(struct tty_struct *tty, struct file * file,
 		return e100_enable_rs485(tty, &rs485data);
 	}
 
+	case TIOCGRS485:
+	{
+		struct serial_rs485 *rs485data =
+			&(((struct e100_serial *)tty->driver_data)->rs485);
+		/* This is the ioctl to get RS485 data from user-space */
+		if (copy_to_user((struct serial_rs485 *) arg,
+					rs485data,
+					sizeof(serial_rs485)))
+			return -EFAULT;
+		break;
+	}
 
 	case TIOCSERWRRS485:
 	{
@@ -3924,7 +3935,6 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
 	 * Check R_DMA_CHx_STATUS bit 0-6=number of available bytes in FIFO
 	 * R_DMA_CHx_HWSW bit 31-16=nbr of bytes left in DMA buffer (0=64k)
 	 */
-	lock_kernel();
 	orig_jiffies = jiffies;
 	while (info->xmit.head != info->xmit.tail || /* More in send queue */
 	       (*info->ostatusadr & 0x007f) ||  /* more in FIFO */
@@ -3941,7 +3951,6 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
 			curr_time_usec - info->last_tx_active_usec;
 	}
 	set_current_state(TASK_RUNNING);
-	unlock_kernel();
 }
 
 /*
@@ -3981,7 +3990,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
 	 */
 	if (tty_hung_up_p(filp) ||
 	    (info->flags & ASYNC_CLOSING)) {
-		wait_event_interruptible(info->close_wait,
+		wait_event_interruptible_tty(info->close_wait,
 			!(info->flags & ASYNC_CLOSING));
 #ifdef SERIAL_DO_RESTART
 		if (info->flags & ASYNC_HUP_NOTIFY)
@@ -4057,7 +4066,9 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
 		printk("block_til_ready blocking: ttyS%d, count = %d\n",
 		       info->line, info->count);
 #endif
+		tty_unlock();
 		schedule();
+		tty_lock();
 	}
 	set_current_state(TASK_RUNNING);
 	remove_wait_queue(&info->open_wait, &wait);
@@ -4139,7 +4150,7 @@ rs_open(struct tty_struct *tty, struct file * filp)
 	 */
 	if (tty_hung_up_p(filp) ||
 	    (info->flags & ASYNC_CLOSING)) {
-		wait_event_interruptible(info->close_wait,
+		wait_event_interruptible_tty(info->close_wait,
 			!(info->flags & ASYNC_CLOSING));
 #ifdef SERIAL_DO_RESTART
 		return ((info->flags & ASYNC_HUP_NOTIFY) ?
@@ -4522,8 +4533,8 @@ static int __init rs_init(void)
 		INIT_WORK(&info->work, do_softint);
 
 		if (info->enabled) {
-			printk(KERN_INFO "%s%d at 0x%x is a builtin UART with DMA\n",
-			       serial_driver->name, info->line, (unsigned int)info->ioport);
+			printk(KERN_INFO "%s%d at %p is a builtin UART with DMA\n",
+			       serial_driver->name, info->line, info->ioport);
 		}
 	}
 #ifdef CONFIG_ETRAX_FAST_TIMER
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index eacb588a934..66ecc7ab6da 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -909,13 +909,11 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 	rational_best_approximation(16 * div * baud, sport->port.uartclk,
 		1 << 16, 1 << 16, &num, &denom);
 
-	if (port->state && port->state->port.tty) {
-		tdiv64 = sport->port.uartclk;
-		tdiv64 *= num;
-		do_div(tdiv64, denom * 16 * div);
-		tty_encode_baud_rate(sport->port.state->port.tty,
+	tdiv64 = sport->port.uartclk;
+	tdiv64 *= num;
+	do_div(tdiv64, denom * 16 * div);
+	tty_termios_encode_baud_rate(termios,
 				(speed_t)tdiv64, (speed_t)tdiv64);
-	}
 
 	num -= 1;
 	denom -= 1;
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index f164ba4eba0..93de907b120 100644
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -954,12 +954,13 @@ ioc3_change_speed(struct uart_port *the_port,
 		  struct ktermios *new_termios, struct ktermios *old_termios)
 {
 	struct ioc3_port *port = get_ioc3_port(the_port);
-	unsigned int cflag;
+	unsigned int cflag, iflag;
 	int baud;