Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 852 insertions, 0 deletions

diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
new file mode 100644
index 00000000000..2a5cf174ca3
--- /dev/null
+++ b/drivers/serial/mpc52xx_uart.c
@@ -0,0 +1,852 @@
+/*
+ * drivers/serial/mpc52xx_uart.c
+ *
+ * Driver for the PSC of the Freescale MPC52xx PSCs configured as UARTs.
+ *
+ * FIXME According to the usermanual the status bits in the status register
+ * are only updated when the peripherals access the FIFO and not when the
+ * CPU access them. So since we use this bits to know when we stop writing
+ * and reading, they may not be updated in-time and a race condition may
+ * exists. But I haven't be able to prove this and I don't care. But if
+ * any problem arises, it might worth checking. The TX/RX FIFO Stats
+ * registers should be used in addition.
+ * Update: Actually, they seem updated ... At least the bits we use.
+ *
+ *
+ * Maintainer : Sylvain Munaut <tnt@246tNt.com>
+ * 
+ * Some of the code has been inspired/copied from the 2.4 code written
+ * by Dale Farnsworth <dfarnsworth@mvista.com>.
+ * 
+ * Copyright (C) 2004-2005 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 MontaVista, Software, Inc.
+ * 
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+ 
+/* Platform device Usage :
+ *
+ * Since PSCs can have multiple function, the correct driver for each one
+ * is selected by calling mpc52xx_match_psc_function(...). The function
+ * handled by this driver is "uart".
+ *
+ * The driver init all necessary registers to place the PSC in uart mode without
+ * DCD. However, the pin multiplexing aren't changed and should be set either
+ * by the bootloader or in the platform init code.
+ *
+ * The idx field must be equal to the PSC index ( e.g. 0 for PSC1, 1 for PSC2,
+ * and so on). So the PSC1 is mapped to /dev/ttyS0, PSC2 to /dev/ttyS1 and so
+ * on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly for
+ * the console code : without this 1:1 mapping, at early boot time, when we are
+ * parsing the kernel args console=ttyS?, we wouldn't know wich PSC it will be
+ * mapped to.
+ */
+
+#include <linux/config.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/sysrq.h>
+#include <linux/console.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+
+#include <asm/mpc52xx.h>
+#include <asm/mpc52xx_psc.h>
+
+#if defined(CONFIG_SERIAL_MPC52xx_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+
+
+
+#define ISR_PASS_LIMIT 256	/* Max number of iteration in the interrupt */
+
+
+static struct uart_port mpc52xx_uart_ports[MPC52xx_PSC_MAXNUM];
+	/* Rem: - We use the read_status_mask as a shadow of
+	 *        psc->mpc52xx_psc_imr
+	 *      - It's important that is array is all zero on start as we
+	 *        use it to know if it's initialized or not ! If it's not sure
+	 *        it's cleared, then a memset(...,0,...) should be added to
+	 *        the console_init
+	 */
+
+#define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase))
+
+
+/* Forward declaration of the interruption handling routine */
+static irqreturn_t mpc52xx_uart_int(int irq,void *dev_id,struct pt_regs *regs);
+
+
+/* Simple macro to test if a port is console or not. This one is taken
+ * for serial_core.c and maybe should be moved to serial_core.h ? */
+#ifdef CONFIG_SERIAL_CORE_CONSOLE
+#define uart_console(port)	((port)->cons && (port)->cons->index == (port)->line)
+#else
+#define uart_console(port)	(0)
+#endif
+
+
+/* ======================================================================== */
+/* UART operations                                                          */
+/* ======================================================================== */
+
+static unsigned int 
+mpc52xx_uart_tx_empty(struct uart_port *port)
+{
+	int status = in_be16(&PSC(port)->mpc52xx_psc_status);
+	return (status & MPC52xx_PSC_SR_TXEMP) ? TIOCSER_TEMT : 0;
+}
+
+static void 
+mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	/* Not implemented */
+}
+
+static unsigned int 
+mpc52xx_uart_get_mctrl(struct uart_port *port)
+{
+	/* Not implemented */
+	return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+}
+
+static void 
+mpc52xx_uart_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+	/* port->lock taken by caller */
+	port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY;
+	out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask);
+}
+
+static void 
+mpc52xx_uart_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+	/* port->lock taken by caller */
+	port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY;
+	out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask);
+}
+
+static void 
+mpc52xx_uart_send_xchar(struct uart_port *port, char ch)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&port->lock, flags);
+	
+	port->x_char = ch;
+	if (ch) {
+		/* Make sure tx interrupts are on */
+		/* Truly necessary ??? They should be anyway */
+		port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY;
+		out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask);
+	}
+	
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void
+mpc52xx_uart_stop_rx(struct uart_port *port)
+{
+	/* port->lock taken by caller */
+	port->read_status_mask &= ~MPC52xx_PSC_IMR_RXRDY;
+	out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask);
+}
+
+static void
+mpc52xx_uart_enable_ms(struct uart_port *port)
+{
+	/* Not implemented */
+}
+
+static void
+mpc52xx_uart_break_ctl(struct uart_port *port, int ctl)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&port->lock, flags);
+
+	if ( ctl == -1 )
+		out_8(&PSC(port)->command,MPC52xx_PSC_START_BRK);
+	else
+		out_8(&PSC(port)->command,MPC52xx_PSC_STOP_BRK);
+	
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int
+mpc52xx_uart_startup(struct uart_port *port)
+{
+	struct mpc52xx_psc __iomem *psc = PSC(port);
+	int ret;
+
+	/* Request IRQ */
+	ret = request_irq(port->irq, mpc52xx_uart_int,
+		SA_INTERRUPT | SA_SAMPLE_RANDOM, "mpc52xx_psc_uart", port);
+	if (ret)
+		return ret;
+
+	/* Reset/activate the port, clear and enable interrupts */
+	out_8(&psc->command,MPC52xx_PSC_RST_RX);
+	out_8(&psc->command,MPC52xx_PSC_RST_TX);
+	
+	out_be32(&psc->sicr,0);	/* UART mode DCD ignored */
+
+	out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00); /* /16 prescaler on */
+	
+	out_8(&psc->rfcntl, 0x00);
+	out_be16(&psc->rfalarm, 0x1ff);
+	out_8(&psc->tfcntl, 0x07);
+	out_be16(&psc->tfalarm, 0x80);
+
+	port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY;
+	out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask);
+	
+	out_8(&psc->command,MPC52xx_PSC_TX_ENABLE);
+	out_8(&psc->command,MPC52xx_PSC_RX_ENABLE);
+		
+	return 0;
+}
+
+static void
+mpc52xx_uart_shutdown(struct uart_port *port)
+{
+	struct mpc52xx_psc __iomem *psc = PSC(port);
+	
+	/* Shut down the port, interrupt and all */
+	out_8(&psc->command,MPC52xx_PSC_RST_RX);
+	out_8(&psc->command,MPC52xx_PSC_RST_TX);
+	
+	port->read_status_mask = 0; 
+	out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask);
+
+	/* Release interrupt */
+	free_irq(port->irq, port);
+}
+
+static void 
+mpc52xx_uart_set_termios(struct uart_port *port, struct termios *new,
+                         struct termios *old)
+{
+	struct mpc52xx_psc __iomem *psc = PSC(port);
+	unsigned long flags;
+	unsigned char mr1, mr2;
+	unsigned short ctr;
+	unsigned int j, baud, quot;
+	
+	/* Prepare what we're gonna write */
+	mr1 = 0;
+	
+	switch (new->c_cflag & CSIZE) {
+		case CS5:	mr1 |= MPC52xx_PSC_MODE_5_BITS;
+				break;
+		case CS6:	mr1 |= MPC52xx_PSC_MODE_6_BITS;
+				break;
+		case CS7:	mr1 |= MPC52xx_PSC_MODE_7_BITS;
+				break;
+		case CS8:
+		default:	mr1 |= MPC52xx_PSC_MODE_8_BITS;
+	}
+
+	if (new->c_cflag & PARENB) {
+		mr1 |= (new->c_cflag & PARODD) ?
+			MPC52xx_PSC_MODE_PARODD : MPC52xx_PSC_MODE_PAREVEN;
+	} else
+		mr1 |= MPC52xx_PSC_MODE_PARNONE;
+	
+	
+	mr2 = 0;
+
+	if (new->c_cflag & CSTOPB)
+		mr2 |= MPC52xx_PSC_MODE_TWO_STOP;
+	else
+		mr2 |= ((new->c_cflag & CSIZE) == CS5) ?
+			MPC52xx_PSC_MODE_ONE_STOP_5_BITS :
+			MPC52xx_PSC_MODE_ONE_STOP;
+
+
+	baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
+	quot = uart_get_divisor(port, baud);
+	ctr = quot & 0xffff;
+	
+	/* Get the lock */
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* Update the per-port timeout */
+	uart_update_timeout(port, new->c_cflag, baud);
+
+	/* Do our best to flush TX & RX, so we don't loose anything */
+	/* But we don't wait indefinitly ! */
+	j = 5000000;	/* Maximum wait */
+	/* FIXME Can't receive chars since set_termios might be called at early
+	 * boot for the console, all stuff is not yet ready to receive at that
+	 * time and that just makes the kernel oops */
+	/* while (j-- && mpc52xx_uart_int_rx_chars(port)); */
+	while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP) && 
+	       --j)
+		udelay(1);
+
+	if (!j)
+		printk(	KERN_ERR "mpc52xx_uart.c: "
+			"Unable to flush RX & TX fifos in-time in set_termios."
+			"Some chars may have been lost.\n" ); 
+
+	/* Reset the TX & RX */
+	out_8(&psc->command,MPC52xx_PSC_RST_RX);
+	out_8(&psc->command,MPC52xx_PSC_RST_TX);
+
+	/* Send new mode settings */
+	out_8(&psc->command,MPC52xx_PSC_SEL_MODE_REG_1);
+	out_8(&psc->mode,mr1);
+	out_8(&psc->mode,mr2);
+	out_8(&psc->ctur,ctr >> 8);
+	out_8(&psc->ctlr,ctr & 0xff);
+	
+	/* Reenable TX & RX */
+	out_8(&psc->command,MPC52xx_PSC_TX_ENABLE);
+	out_8(&psc->command,MPC52xx_PSC_RX_ENABLE);
+
+	/* We're all set, release the lock */
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *
+mpc52xx_uart_type(struct uart_port *port)
+{
+	return port->type == PORT_MPC52xx ? "MPC52xx PSC" : NULL;
+}
+
+static void
+mpc52xx_uart_release_port(struct uart_port *port)
+{
+	if (port->flags & UPF_IOREMAP) { /* remapped by us ? */
+		iounmap(port->membase);
+		port->membase = NULL;
+	}
+
+	release_mem_region(port->mapbase, MPC52xx_PSC_SIZE);
+}
+
+static int
+mpc52xx_uart_request_port(struct uart_port *port)
+{
+	if (port->flags & UPF_IOREMAP) /* Need to remap ? */
+		port->membase = ioremap(port->mapbase, MPC52xx_PSC_SIZE);
+
+	if (!port->membase)
+		return -EINVAL;
+
+	return request_mem_region(port->mapbase, MPC52xx_PSC_SIZE,
+			"mpc52xx_psc_uart") != NULL ? 0 : -EBUSY;
+}
+
+static void
+mpc52xx_uart_config_port(struct uart_port *port, int flags)
+{
+	if ( (flags & UART_CONFIG_TYPE) &&
+	     (mpc52xx_uart_request_port(port) == 0) )
+	     	port->type = PORT_MPC52xx;
+}
+
+static int
+mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+	if ( ser->type != PORT_UNKNOWN && ser->type != PORT_MPC52xx )
+		return -EINVAL;
+
+	if ( (ser->irq != port->irq) ||
+	     (ser->io_type != SERIAL_IO_MEM) ||
+	     (ser->baud_base != port->uartclk)  || 
+	     (ser->iomem_base != (void*)port->mapbase) ||
+	     (ser->hub6 != 0 ) )
+		return -EINVAL;
+
+	return 0;
+}
+
+
+static struct uart_ops mpc52xx_uart_ops = {
+	.tx_empty	= mpc52xx_uart_tx_empty,
+	.set_mctrl	= mpc52xx_uart_set_mctrl,
+	.get_mctrl	= mpc52xx_uart_get_mctrl,
+	.stop_tx	= mpc52xx_uart_stop_tx,
+	.start_tx	= mpc52xx_uart_start_tx,
+	.send_xchar	= mpc52xx_uart_send_xchar,
+	.stop_rx	= mpc52xx_uart_stop_rx,
+	.enable_ms	= mpc52xx_uart_enable_ms,
+	.break_ctl	= mpc52xx_uart_break_ctl,
+	.startup	= mpc52xx_uart_startup,
+	.shutdown	= mpc52xx_uart_shutdown,
+	.set_termios	= mpc52xx_uart_set_termios,
+/*	.pm		= mpc52xx_uart_pm,		Not supported yet */
+/*	.set_wake	= mpc52xx_uart_set_wake,	Not supported yet */
+	.type		= mpc52xx_uart_type,
+	.release_port	= mpc52xx_uart_release_port,
+	.request_port	= mpc52xx_uart_request_port,
+	.config_port	= mpc52xx_uart_config_port,
+	.verify_port	= mpc52xx_uart_verify_port
+};
+
+	
+/* ======================================================================== */
+/* Interrupt handling                                                       */
+/* ======================================================================== */
+	
+static inline int
+mpc52xx_uart_int_rx_chars(struct uart_port *port, struct pt_regs *regs)
+{
+	struct tty_struct *tty = port->info->tty;
+	unsigned char ch;
+	unsigned short status;
+
+	/* While we can read, do so ! */
+	while ( (status = in_be16(&PSC(port)->mpc52xx_psc_status)) &
+	        MPC52xx_PSC_SR_RXRDY) {
+
+		/* If we are full, just stop reading */
+		if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+			break;
+		
+		/* Get the char */
+		ch = in_8(&PSC(port)->mpc52xx_psc_buffer_8);
+
+		/* Handle sysreq char */
+#ifdef SUPPORT_SYSRQ
+		if (uart_handle_sysrq_char(port, ch, regs)) {
+			port->sysrq = 0;
+			continue;
+		}
+#endif
+
+		/* Store it */
+		*tty->flip.char_buf_ptr = ch;
+		*tty->flip.flag_buf_ptr = 0;
+		port->icount.rx++;
+	
+		if ( status & (MPC52xx_PSC_SR_PE |
+		               MPC52xx_PSC_SR_FE |
+		               MPC52xx_PSC_SR_RB |
+		               MPC52xx_PSC_SR_OE) ) {
+			
+			if (status & MPC52xx_PSC_SR_RB) {
+				*tty->flip.flag_buf_ptr = TTY_BREAK;
+				uart_handle_break(port);
+			} else if (status & MPC52xx_PSC_SR_PE)
+				*tty->flip.flag_buf_ptr = TTY_PARITY;
+			else if (status & MPC52xx_PSC_SR_FE)
+				*tty->flip.flag_buf_ptr = TTY_FRAME;
+			if (status & MPC52xx_PSC_SR_OE) {
+				/*
+				 * Overrun is special, since it's
+				 * reported immediately, and doesn't
+				 * affect the current character
+				 */
+				if (tty->flip.count < (TTY_FLIPBUF_SIZE-1)) {
+					tty->flip.flag_buf_ptr++;
+					tty->flip.char_buf_ptr++;
+					tty->flip.count++;
+				}
+				*tty->flip.flag_buf_ptr = TTY_OVERRUN;
+			}
+
+			/* Clear error condition */
+			out_8(&PSC(port)->command,MPC52xx_PSC_RST_ERR_STAT);
+
+		}
+
+		tty->flip.char_buf_ptr++;
+		tty->flip.flag_buf_ptr++;
+		tty->flip.count++;
+
+	}
+
+	tty_flip_buffer_push(tty);
+	
+	return in_be16(&PSC(port)->mpc52xx_psc_status) & MPC52xx_PSC_SR_RXRDY;
+}
+
+static inline int
+mpc52xx_uart_int_tx_chars(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->info->xmit;
+
+	/* Process out of band chars */
+	if (port->x_char) {
+		out_8(&PSC(port)->mpc52xx_psc_buffer_8, port->x_char);
+		port->icount.tx++;
+		port->x_char = 0;
+		return 1;
+	}
+
+	/* Nothing to do ? */
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+		mpc52xx_uart_stop_tx(port,0);
+		return 0;
+	}
+
+	/* Send chars */
+	while (in_be16(&PSC(port)->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXRDY) {
+		out_8(&PSC(port)->mpc52xx_psc_buffer_8, xmit->buf[xmit->tail]);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+		if (uart_circ_empty(xmit))
+			break;
+	}
+
+	/* Wake up */
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	/* Maybe we're done after all */
+	if (uart_circ_empty(xmit)) {
+		mpc52xx_uart_stop_tx(port,0);
+		return 0;
+	}
+
+	return 1;
+}
+
+static irqreturn_t 
+mpc52xx_uart_int(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct uart_port *port = (struct uart_port *) dev_id;
+	unsigned long pass = ISR_PASS_LIMIT;
+	unsigned int keepgoing;
+	unsigned short status;
+	
+	if ( irq != port->irq ) {
+		printk( KERN_WARNING
+		        "mpc52xx_uart_int : " \
+		        "Received wrong int %d. Waiting for %d\n",
+		       irq, port->irq);
+		return IRQ_NONE;
+	}
+	
+	spin_lock(&port->lock);
+	
+	/* While we have stuff to do, we continue */
+	do {
+		/* If we don't find anything to do, we stop */
+		keepgoing = 0; 
+		
+		/* Read status */
+		status = in_be16(&PSC(port)->mpc52xx_psc_isr);
+		status &= port->read_status_mask;
+			
+		/* Do we need to receive chars ? */
+		/* For this RX interrupts must be on and some chars waiting */
+		if ( status & MPC52xx_PSC_IMR_RXRDY )
+			keepgoing |= mpc52xx_uart_int_rx_chars(port, regs);
+
+		/* Do we need to send chars ? */
+		/* For this, TX must be ready and TX interrupt enabled */
+		if ( status & MPC52xx_PSC_IMR_TXRDY )
+			keepgoing |= mpc52xx_uart_int_tx_chars(port);
+		
+		/* Limit number of iteration */
+		if ( !(--pass) )
+			keepgoing = 0;
+
+	} while (keepgoing);
+	
+	spin_unlock(&port->lock);
+	
+	return IRQ_HANDLED;
+}
+
+
+/* ======================================================================== */
+/* Console ( if applicable )                                                */
+/* ======================================================================== */
+
+#ifdef CONFIG_SERIAL_MPC52xx_CONSOLE
+
+static void __init
+mpc52xx_console_get_options(struct uart_port *port,
+                            int *baud, int *parity, int *bits, int *flow)
+{
+	struct mpc52xx_psc __iomem *psc = PSC(port);
+	unsigned char mr1;
+
+	/* Read the mode registers */
+	out_8(&psc->command,MPC52xx_PSC_SEL_MODE_REG_1);
+	mr1 = in_8(&psc->mode);
+	
+	/* CT{U,L}R are write-only ! */
+	*baud = __res.bi_baudrate ?
+		__res.bi_baudrate : CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
+
+	/* Parse them */
+	switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) {
+		case MPC52xx_PSC_MODE_5_BITS:	*bits = 5; break;
+		case MPC52xx_PSC_MODE_6_BITS:	*bits = 6; break;
+		case MPC52xx_PSC_MODE_7_BITS:	*bits = 7; break;
+		case MPC52xx_PSC_MODE_8_BITS:
+		default:			*bits = 8;
+	}
+	
+	if (mr1 & MPC52xx_PSC_MODE_PARNONE)
+		*parity = 'n';
+	else
+		*parity = mr1 & MPC52xx_PSC_MODE_PARODD ? 'o' : 'e';
+}
+
+static void  
+mpc52xx_console_write(struct console *co, const char *s, unsigned int count)
+{
+	struct uart_port *port = &mpc52xx_uart_ports[co->index];
+	struct mpc52xx_psc __iomem *psc = PSC(port);
+	unsigned int i, j;
+	
+	/* Disable interrupts */
+	out_be16(&psc->mpc52xx_psc_imr, 0);
+
+	/* Wait the TX buffer to be empty */
+	j = 5000000;	/* Maximum wait */	
+	while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP) && 
+	       --j)
+		udelay(1);
+
+	/* Write all the chars */
+	for ( i=0 ; i<count ; i++ ) {
+	
+		/* Send the char */
+		out_8(&psc->mpc52xx_psc_buffer_8, *s);
+
+		/* Line return handling */
+		if ( *s++ == '\n' )
+			out_8(&psc->mpc52xx_psc_buffer_8, '\r');
+		
+		/* Wait the TX buffer to be empty */
+		j = 20000;	/* Maximum wait */	
+		while (!(in_be16(&psc->mpc52xx_psc_status) & 
+		         MPC52xx_PSC_SR_TXEMP) && --j)
+			udelay(1);
+	}
+
+	/* Restore interrupt state */
+	out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
+}
+
+static int __init
+mpc52xx_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port = &mpc52xx_uart_ports[co->index];
+
+	int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	if (co->index < 0 || co->index >= MPC52xx_PSC_MAXNUM)
+		return -EINVAL;
+	
+	/* Basic port init. Needed since we use some uart_??? func before
+	 * real init for early access */
+	spin_lock_init(&port->lock);
+	port->uartclk	= __res.bi_ipbfreq / 2; /* Look at CTLR doc */
+	port->ops	= &mpc52xx_uart_ops;
+	port->mapbase	= MPC52xx_PA(MPC52xx_PSCx_OFFSET(co->index+1));
+
+	/* We ioremap ourself */
+	port->membase = ioremap(port->mapbase, MPC52xx_PSC_SIZE);
+	if (port->membase == NULL)
+		return -EINVAL;
+
+	/* Setup the port parameters accoding to options */
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+	else
+		mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+
+extern struct uart_driver mpc52xx_uart_driver;
+
+static struct console mpc52xx_console = {
+	.name	= "ttyS",
+	.write	= mpc52xx_console_write,
+	.device	= uart_console_device,
+	.setup	= mpc52xx_console_setup,
+	.flags	= CON_PRINTBUFFER,
+	.index	= -1,	/* Specified on the cmdline (e.g. console=ttyS0 ) */
+	.data	= &mpc52xx_uart_driver,
+};
+
+	
+static int __init 
+mpc52xx_console_init(void)
+{
+	register_console(&mpc52xx_console);
+	return 0;
+}
+
+console_initcall(mpc52xx_console_init);
+
+#define MPC52xx_PSC_CONSOLE &mpc52xx_console
+#else
+#define MPC52xx_PSC_CONSOLE NULL
+#endif
+
+
+/* ======================================================================== */
+/* UART Driver                                                              */
+/* ======================================================================== */
+
+static struct uart_driver mpc52xx_uart_driver = {
+	.owner		= THIS_MODULE,
+	.driver_name	= "mpc52xx_psc_uart",
+	.dev_name	= "ttyS",
+	.devfs_name	= "ttyS",
+	.major		= TTY_MAJOR,
+	.minor		= 64,
+	.nr		= MPC52xx_PSC_MAXNUM,
+	.cons		= MPC52xx_PSC_CONSOLE,
+};
+
+
+/* ======================================================================== */
+/* Platform Driver                                                          */
+/* ======================================================================== */
+
+static int __devinit
+mpc52xx_uart_probe(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct resource *res = pdev->resource;
+
+	struct uart_port *port = NULL;
+	int i, idx, ret;
+
+	/* Check validity & presence */
+	idx = pdev->id;
+	if (idx < 0 || idx >= MPC52xx_PSC_MAXNUM)
+		return -EINVAL;
+
+	if (!mpc52xx_match_psc_function(idx,"uart"))
+		return -ENODEV;
+
+	/* Init the port structure */
+	port = &mpc52xx_uart_ports[idx];
+
+	memset(port, 0x00, sizeof(struct uart_port));
+
+	spin_lock_init(&port->lock);
+	port->uartclk	= __res.bi_ipbfreq / 2; /* Look at CTLR doc */
+	port->fifosize	= 255; /* Should be 512 ! But it can't be */
+	                       /* stored in a unsigned char       */
+	port->iotype	= UPIO_MEM;
+	port->flags	= UPF_BOOT_AUTOCONF |
+			  ( uart_console(port) ? 0 : UPF_IOREMAP );
+	port->line	= idx;
+	port->ops	= &mpc52xx_uart_ops;
+
+	/* Search for IRQ and mapbase */
+	for (i=0 ; i<pdev->num_resources ; i++, res++) {
+		if (res->flags & IORESOURCE_MEM)
+			port->mapbase = res->start;
+		else if (res->flags & IORESOURCE_IRQ)
+			port->irq = res->start;
+	}
+	if (!port->irq || !port->mapbase)
+		return -EINVAL;
+
+	/* Add the port to the uart sub-system */
+	ret = uart_add_one_port(&mpc52xx_uart_driver, port);
+	if (!ret)
+		dev_set_drvdata(dev, (void*)port);
+
+	return ret;
+}
+
+static int
+mpc52xx_uart_remove(struct device *dev)
+{
+	struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev);
+
+	dev_set_drvdata(dev, NULL);
+
+	if (port)
+		uart_remove_one_port(&mpc52xx_uart_driver, port);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int
+mpc52xx_uart_suspend(struct device *dev, u32 state, u32 level)
+{
+	struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev);
+
+	if (sport && level == SUSPEND_DISABLE)
+		uart_suspend_port(&mpc52xx_uart_driver, port);
+
+	return 0;
+}
+
+static int
+mpc52xx_uart_resume(struct device *dev, u32 level)
+{
+	struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev);
+
+	if (port && level == RESUME_ENABLE)
+		uart_resume_port(&mpc52xx_uart_driver, port);
+
+	return 0;
+}
+#endif
+
+static struct device_driver mpc52xx_uart_platform_driver = {
+	.name		= "mpc52xx-psc",
+	.bus		= &platform_bus_type,
+	.probe		= mpc52xx_uart_probe,
+	.remove		= mpc52xx_uart_remove,
+#ifdef CONFIG_PM
+	.suspend	= mpc52xx_uart_suspend,
+	.resume		= mpc52xx_uart_resume,
+#endif
+};
+
+
+/* ======================================================================== */
+/* Module                                                                   */
+/* ======================================================================== */
+
+static int __init
+mpc52xx_uart_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "Serial: MPC52xx PSC driver\n");
+
+	ret = uart_register_driver(&mpc52xx_uart_driver);
+	if (ret == 0) {
+		ret = driver_register(&mpc52xx_uart_platform_driver);
+		if (ret)
+			uart_unregister_driver(&mpc52xx_uart_driver);
+	}
+
+	return ret;
+}
+
+static void __exit
+mpc52xx_uart_exit(void)
+{
+	driver_unregister(&mpc52xx_uart_platform_driver);
+	uart_unregister_driver(&mpc52xx_uart_driver);
+}
+
+
+module_init(mpc52xx_uart_init);
+module_exit(mpc52xx_uart_exit);
+
+MODULE_AUTHOR("Sylvain Munaut <tnt@246tNt.com>");
+MODULE_DESCRIPTION("Freescale MPC52xx PSC UART");
+MODULE_LICENSE("GPL");