Merge commit 'v2.6.30-rc3' into tracing/hw-branch-tracing

Conflicts:
	arch/x86/kernel/ptrace.c

Merge reason: fix the conflict above, and also pick up the CONFIG_BROKEN
              dependency change from upstream so that we can remove it
	      here.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 36 insertions, 15 deletions

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 07c03b9eb12..343e3a35b6a 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -533,6 +533,13 @@ config SERIAL_S3C6400
 	  Serial port support for the Samsung S3C6400 and S3C6410
 	  SoCs
 
+config SERIAL_MAX3100
+	tristate "MAX3100 support"
+	depends on SPI
+	select SERIAL_CORE
+	help
+	  MAX3100 chip support
+
 config SERIAL_DZ
 	bool "DECstation DZ serial driver"
 	depends on MACH_DECSTATION && 32BIT
@@ -700,7 +707,7 @@ choice
 
 config SERIAL_BFIN_DMA
 	bool "DMA mode"
-	depends on !DMA_UNCACHED_NONE && !KGDB_UART
+	depends on !DMA_UNCACHED_NONE && KGDB_SERIAL_CONSOLE=n
 	help
 	  This driver works under DMA mode. If this option is selected, the
 	  blackfin simple dma driver is also enabled.
@@ -727,19 +734,19 @@ config BFIN_UART0_CTSRTS
 
 config UART0_CTS_PIN
 	int "UART0 CTS pin"
-	depends on BFIN_UART0_CTSRTS
+	depends on BFIN_UART0_CTSRTS && !BF548
 	default 23
 	help
 	  The default pin is GPIO_GP7.
-	  Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+	  Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
 
 config UART0_RTS_PIN
 	int "UART0 RTS pin"
-	depends on BFIN_UART0_CTSRTS
+	depends on BFIN_UART0_CTSRTS && !BF548
 	default 22
 	help
 	  The default pin is GPIO_GP6.
-	  Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+	  Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
 
 config SERIAL_BFIN_UART1
 	bool "Enable UART1"
@@ -756,17 +763,17 @@ config BFIN_UART1_CTSRTS
 
 config UART1_CTS_PIN
 	int "UART1 CTS pin"
-	depends on BFIN_UART1_CTSRTS && !BF54x
+	depends on BFIN_UART1_CTSRTS && !BF548
 	default -1
 	help
-	  Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+	  Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
 
 config UART1_RTS_PIN
 	int "UART1 RTS pin"
-	depends on BFIN_UART1_CTSRTS && !BF54x
+	depends on BFIN_UART1_CTSRTS && !BF548
 	default -1
 	help
-	  Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+	  Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
 
 config SERIAL_BFIN_UART2
 	bool "Enable UART2"
@@ -783,17 +790,17 @@ config BFIN_UART2_CTSRTS
 
 config UART2_CTS_PIN
 	int "UART2 CTS pin"
-	depends on BFIN_UART2_CTSRTS
+	depends on BFIN_UART2_CTSRTS && !BF548
 	default -1
 	help
-	  Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+	  Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
 
 config UART2_RTS_PIN
 	int "UART2 RTS pin"
-	depends on BFIN_UART2_CTSRTS
+	depends on BFIN_UART2_CTSRTS && !BF548
 	default -1
 	help
-	  Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+	  Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
 
 config SERIAL_BFIN_UART3
 	bool "Enable UART3"
@@ -808,6 +815,20 @@ config BFIN_UART3_CTSRTS
 	  Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
 	  signal.
 
+config UART3_CTS_PIN
+	int "UART3 CTS pin"
+	depends on BFIN_UART3_CTSRTS && !BF548
+	default -1
+	help
+	  Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
+
+config UART3_RTS_PIN
+	int "UART3 RTS pin"
+	depends on BFIN_UART3_CTSRTS && !BF548
+	default -1
+	help
+	  Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map.
+
 config SERIAL_IMX
 	bool "IMX serial port support"
 	depends on ARM && (ARCH_IMX || ARCH_MXC)
@@ -833,7 +854,7 @@ config SERIAL_IMX_CONSOLE
 
 config SERIAL_UARTLITE
 	tristate "Xilinx uartlite serial port support"
-	depends on PPC32
+	depends on PPC32 || MICROBLAZE
 	select SERIAL_CORE
 	help
 	  Say Y here if you want to use the Xilinx uartlite serial controller.
@@ -1319,7 +1340,7 @@ config SERIAL_NETX_CONSOLE
 
 config SERIAL_OF_PLATFORM
 	tristate "Serial port on Open Firmware platform bus"
-	depends on PPC_OF
+	depends on PPC_OF || MICROBLAZE
 	depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL
 	help
 	  If you have a PowerPC based system that has serial ports