tty: move drivers/serial/ to drivers/tty/serial/

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 2978 deletions

diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
deleted file mode 100644
index 88b13356ec1..00000000000
--- a/drivers/serial/68360serial.c
+++ /dev/null
@@ -1,2978 +0,0 @@
-/*
- *  UART driver for 68360 CPM SCC or SMC
- *  Copyright (c) 2000 D. Jeff Dionne <jeff@uclinux.org>,
- *  Copyright (c) 2000 Michael Leslie <mleslie@lineo.ca>
- *  Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
- *
- * I used the serial.c driver as the framework for this driver.
- * Give credit to those guys.
- * The original code was written for the MBX860 board.  I tried to make
- * it generic, but there may be some assumptions in the structures that
- * have to be fixed later.
- * To save porting time, I did not bother to change any object names
- * that are not accessed outside of this file.
- * It still needs lots of work........When it was easy, I included code
- * to support the SCCs, but this has never been tested, nor is it complete.
- * Only the SCCs support modem control, so that is not complete either.
- *
- * This module exports the following rs232 io functions:
- *
- *	int rs_360_init(void);
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/serialP.h> 
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <asm/irq.h>
-#include <asm/m68360.h>
-#include <asm/commproc.h>
-
- 
-#ifdef CONFIG_KGDB
-extern void breakpoint(void);
-extern void set_debug_traps(void);
-extern int  kgdb_output_string (const char* s, unsigned int count);
-#endif
-
-
-/* #ifdef CONFIG_SERIAL_CONSOLE */ /* This seems to be a post 2.0 thing - mles */
-#include <linux/console.h>
-#include <linux/jiffies.h>
-
-/* this defines the index into rs_table for the port to use
- */
-#ifndef CONFIG_SERIAL_CONSOLE_PORT
-#define CONFIG_SERIAL_CONSOLE_PORT	1 /* ie SMC2 - note USE_SMC2 must be defined */
-#endif
-/* #endif */
-
-#if 0
-/* SCC2 for console
- */
-#undef CONFIG_SERIAL_CONSOLE_PORT
-#define CONFIG_SERIAL_CONSOLE_PORT	2
-#endif
-
-
-#define TX_WAKEUP	ASYNC_SHARE_IRQ
-
-static char *serial_name = "CPM UART driver";
-static char *serial_version = "0.03";
-
-static struct tty_driver *serial_driver;
-int serial_console_setup(struct console *co, char *options);
-
-/*
- * Serial driver configuration section.  Here are the various options:
- */
-#define SERIAL_PARANOIA_CHECK
-#define CONFIG_SERIAL_NOPAUSE_IO
-#define SERIAL_DO_RESTART
-
-/* Set of debugging defines */
-
-#undef SERIAL_DEBUG_INTR
-#undef SERIAL_DEBUG_OPEN
-#undef SERIAL_DEBUG_FLOW
-#undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
-
-#define _INLINE_ inline
-  
-#define DBG_CNT(s)
-
-/* We overload some of the items in the data structure to meet our
- * needs.  For example, the port address is the CPM parameter ram
- * offset for the SCC or SMC.  The maximum number of ports is 4 SCCs and
- * 2 SMCs.  The "hub6" field is used to indicate the channel number, with
- * a flag indicating SCC or SMC, and the number is used as an index into
- * the CPM parameter area for this device.
- * The "type" field is currently set to 0, for PORT_UNKNOWN.  It is
- * not currently used.  I should probably use it to indicate the port
- * type of SMC or SCC.
- * The SMCs do not support any modem control signals.
- */
-#define smc_scc_num	hub6
-#define NUM_IS_SCC	((int)0x00010000)
-#define PORT_NUM(P)	((P) & 0x0000ffff)
-
-
-#if defined (CONFIG_UCQUICC)
-
-volatile extern void *_periph_base;
-/* sipex transceiver
- *   mode bits for       are on pins
- *
- *    SCC2                d16..19
- *    SCC3                d20..23
- *    SCC4                d24..27
- */
-#define SIPEX_MODE(n,m) ((m & 0x0f)<<(16+4*(n-1)))
-
-static uint sipex_mode_bits = 0x00000000;
-
-#endif
-
-/* There is no `serial_state' defined back here in 2.0.
- * Try to get by with serial_struct
- */
-/* #define serial_state serial_struct */
-
-/* 2.4 -> 2.0 portability problem: async_icount in 2.4 has a few
- * extras: */
-
-#if 0
-struct async_icount_24 {
-	__u32   cts, dsr, rng, dcd, tx, rx;
-	__u32   frame, parity, overrun, brk;
-	__u32   buf_overrun;
-} icount;
-#endif
-
-#if 0
-
-struct serial_state {
-        int     magic;
-        int     baud_base;
-        unsigned long   port;
-        int     irq;
-        int     flags;
-        int     hub6;
-        int     type;
-        int     line;
-        int     revision;       /* Chip revision (950) */
-        int     xmit_fifo_size;
-        int     custom_divisor;
-        int     count;
-        u8      *iomem_base;
-        u16     iomem_reg_shift;
-        unsigned short  close_delay;
-        unsigned short  closing_wait; /* time to wait before closing */
-        struct async_icount_24     icount; 
-        int     io_type;
-        struct async_struct *info;
-};
-#endif
-
-#define SSTATE_MAGIC 0x5302
-
-
-
-/* SMC2 is sometimes used for low performance TDM interfaces.  Define
- * this as 1 if you want SMC2 as a serial port UART managed by this driver.
- * Define this as 0 if you wish to use SMC2 for something else.
- */
-#define USE_SMC2 1
-
-#if 0
-/* Define SCC to ttySx mapping. */
-#define SCC_NUM_BASE	(USE_SMC2 + 1)	/* SCC base tty "number" */
-
-/* Define which SCC is the first one to use for a serial port.  These
- * are 0-based numbers, i.e. this assumes the first SCC (SCC1) is used
- * for Ethernet, and the first available SCC for serial UART is SCC2.
- * NOTE:  IF YOU CHANGE THIS, you have to change the PROFF_xxx and
- * interrupt vectors in the table below to match.
- */
-#define SCC_IDX_BASE	1	/* table index */
-#endif
-
-
-/* Processors other than the 860 only get SMCs configured by default.
- * Either they don't have SCCs or they are allocated somewhere else.
- * Of course, there are now 860s without some SCCs, so we will need to
- * address that someday.
- * The Embedded Planet Multimedia I/O cards use TDM interfaces to the
- * stereo codec parts, and we use SMC2 to help support that.
- */
-static struct serial_state rs_table[] = {
-/*  type   line   PORT           IRQ       FLAGS  smc_scc_num (F.K.A. hub6) */
-	{  0,     0, PRSLOT_SMC1, CPMVEC_SMC1,   0,    0 }    /* SMC1 ttyS0 */
-#if USE_SMC2
-	,{ 0,     0, PRSLOT_SMC2, CPMVEC_SMC2,   0,    1 }     /* SMC2 ttyS1 */
-#endif
-
-#if defined(CONFIG_SERIAL_68360_SCC)
-	,{ 0,     0, PRSLOT_SCC2, CPMVEC_SCC2,   0, (NUM_IS_SCC | 1) }    /* SCC2 ttyS2 */
-	,{ 0,     0, PRSLOT_SCC3, CPMVEC_SCC3,   0, (NUM_IS_SCC | 2) }    /* SCC3 ttyS3 */
-	,{ 0,     0, PRSLOT_SCC4, CPMVEC_SCC4,   0, (NUM_IS_SCC | 3) }    /* SCC4 ttyS4 */
-#endif
-};
-
-#define NR_PORTS	(sizeof(rs_table)/sizeof(struct serial_state))
-
-/* The number of buffer descriptors and their sizes.
- */
-#define RX_NUM_FIFO	4
-#define RX_BUF_SIZE	32
-#define TX_NUM_FIFO	4
-#define TX_BUF_SIZE	32
-
-#define CONSOLE_NUM_FIFO 2
-#define CONSOLE_BUF_SIZE 4
-
-char *console_fifos[CONSOLE_NUM_FIFO * CONSOLE_BUF_SIZE];
-
-/* The async_struct in serial.h does not really give us what we
- * need, so define our own here.
- */
-typedef struct serial_info {
-	int			magic;
-	int			flags;
-
-	struct serial_state	*state;
- 	/* struct serial_struct	*state; */
- 	/* struct async_struct	*state; */
-	
-	struct tty_struct 	*tty;
-	int			read_status_mask;
-	int			ignore_status_mask;
-	int			timeout;
-	int			line;
-	int			x_char;	/* xon/xoff character */
-	int			close_delay;
-	unsigned short		closing_wait;
-	unsigned short		closing_wait2;
-	unsigned long		event;
-	unsigned long		last_active;
-	int			blocked_open; /* # of blocked opens */
-	struct work_struct	tqueue;
-	struct work_struct	tqueue_hangup;
- 	wait_queue_head_t	open_wait; 
- 	wait_queue_head_t	close_wait; 
-
-	
-/* CPM Buffer Descriptor pointers.
-	*/
-	QUICC_BD			*rx_bd_base;
-	QUICC_BD			*rx_cur;
-	QUICC_BD			*tx_bd_base;
-	QUICC_BD			*tx_cur;
-} ser_info_t;
-
-
-/* since kmalloc_init() does not get called until much after this initialization: */
-static ser_info_t  quicc_ser_info[NR_PORTS];
-static char rx_buf_pool[NR_PORTS * RX_NUM_FIFO * RX_BUF_SIZE];
-static char tx_buf_pool[NR_PORTS * TX_NUM_FIFO * TX_BUF_SIZE];
-
-static void change_speed(ser_info_t *info);
-static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout);
-
-static inline int serial_paranoia_check(ser_info_t *info,
-					char *name, const char *routine)
-{
-#ifdef SERIAL_PARANOIA_CHECK
-	static const char *badmagic =
-		"Warning: bad magic number for serial struct (%s) in %s\n";
-	static const char *badinfo =
-		"Warning: null async_struct for (%s) in %s\n";
-
-	if (!info) {
-		printk(badinfo, name, routine);
-		return 1;
-	}
-	if (info->magic != SERIAL_MAGIC) {
-		printk(badmagic, name, routine);
-		return 1;
-	}
-#endif
-	return 0;
-}
-
-/*
- * This is used to figure out the divisor speeds and the timeouts,
- * indexed by the termio value.  The generic CPM functions are responsible
- * for setting and assigning baud rate generators for us.
- */
-static int baud_table[] = {
-	0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
-	9600, 19200, 38400, 57600, 115200, 230400, 460800, 0 };
-
-/* This sucks. There is a better way: */
-#if defined(CONFIG_CONSOLE_9600)
-  #define CONSOLE_BAUDRATE 9600
-#elif defined(CONFIG_CONSOLE_19200)
-  #define CONSOLE_BAUDRATE 19200
-#elif defined(CONFIG_CONSOLE_115200)
-  #define CONSOLE_BAUDRATE 115200
-#else
-  #warning "console baud rate undefined"
-  #define CONSOLE_BAUDRATE 9600
-#endif
-
-/*
- * ------------------------------------------------------------
- * rs_stop() and rs_start()
- *
- * This routines are called before setting or resetting tty->stopped.
- * They enable or disable transmitter interrupts, as necessary.
- * ------------------------------------------------------------
- */
-static void rs_360_stop(struct tty_struct *tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	int	idx;
-	unsigned long flags;
- 	volatile struct scc_regs *sccp;
- 	volatile struct smc_regs *smcp;
-
-	if (serial_paranoia_check(info, tty->name, "rs_stop"))
-		return;
-	
-	local_irq_save(flags);
-	idx = PORT_NUM(info->state->smc_scc_num);
-	if (info->state->smc_scc_num & NUM_IS_SCC) {
-		sccp = &pquicc->scc_regs[idx];
-		sccp->scc_sccm &= ~UART_SCCM_TX;
-	} else {
-		/* smcp = &cpmp->cp_smc[idx]; */
-		smcp = &pquicc->smc_regs[idx];
-		smcp->smc_smcm &= ~SMCM_TX;
-	}
-	local_irq_restore(flags);
-}
-
-
-static void rs_360_start(struct tty_struct *tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	int	idx;
-	unsigned long flags;
-	volatile struct scc_regs *sccp;
-	volatile struct smc_regs *smcp;
-
-	if (serial_paranoia_check(info, tty->name, "rs_stop"))
-		return;
-	
-	local_irq_save(flags);
-	idx = PORT_NUM(info->state->smc_scc_num);
-	if (info->state->smc_scc_num & NUM_IS_SCC) {
-		sccp = &pquicc->scc_regs[idx];
-		sccp->scc_sccm |= UART_SCCM_TX;
-	} else {
-		smcp = &pquicc->smc_regs[idx];
-		smcp->smc_smcm |= SMCM_TX;
-	}
-	local_irq_restore(flags);
-}
-
-/*
- * ----------------------------------------------------------------------
- *
- * Here starts the interrupt handling routines.  All of the following
- * subroutines are declared as inline and are folded into
- * rs_interrupt().  They were separated out for readability's sake.
- *
- * Note: rs_interrupt() is a "fast" interrupt, which means that it
- * runs with interrupts turned off.  People who may want to modify
- * rs_interrupt() should try to keep the interrupt handler as fast as
- * possible.  After you are done making modifications, it is not a bad
- * idea to do:
- * 
- * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
- *
- * and look at the resulting assemble code in serial.s.
- *
- * 				- Ted Ts'o (tytso@mit.edu), 7-Mar-93
- * -----------------------------------------------------------------------
- */
-
-static _INLINE_ void receive_chars(ser_info_t *info)
-{
-	struct tty_struct *tty = info->port.tty;
-	unsigned char ch, flag, *cp;
-	/*int	ignored = 0;*/
-	int	i;
-	ushort	status;
-	 struct	async_icount *icount; 
-	/* struct	async_icount_24 *icount; */
-	volatile QUICC_BD	*bdp;
-
-	icount = &info->state->icount;
-
-	/* Just loop through the closed BDs and copy the characters into
-	 * the buffer.
-	 */
-	bdp = info->rx_cur;
-	for (;;) {
-		if (bdp->status & BD_SC_EMPTY)	/* If this one is empty */
-			break;			/*   we are all done */
-
-		/* The read status mask tell us what we should do with
-		 * incoming characters, especially if errors occur.
-		 * One special case is the use of BD_SC_EMPTY.  If
-		 * this is not set, we are supposed to be ignoring
-		 * inputs.  In this case, just mark the buffer empty and
-		 * continue.
-		 */
-		if (!(info->read_status_mask & BD_SC_EMPTY)) {
-			bdp->status |= BD_SC_EMPTY;
-			bdp->status &=
-				~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV);
-
-			if (bdp->status & BD_SC_WRAP)
-				bdp = info->rx_bd_base;
-			else
-				bdp++;
-			continue;
-		}
-
-		/* Get the number of characters and the buffer pointer.
-		*/
-		i = bdp->length;
-		/* cp = (unsigned char *)__va(bdp->buf); */
-		cp = (char *)bdp->buf;
-		status = bdp->status;
-
-		while (i-- > 0) {
-			ch = *cp++;
-			icount->rx++;
-
-#ifdef SERIAL_DEBUG_INTR
-			printk("DR%02x:%02x...", ch, status);
-#endif
-			flag = TTY_NORMAL;
-
-			if (status & (BD_SC_BR | BD_SC_FR |
-				       BD_SC_PR | BD_SC_OV)) {
-				/*
-				 * For statistics only
-				 */
-				if (status & BD_SC_BR)
-					icount->brk++;
-				else if (status & BD_SC_PR)
-					icount->parity++;
-				else if (status & BD_SC_FR)
-					icount->frame++;
-				if (status & BD_SC_OV)
-					icount->overrun++;
-
-				/*
-				 * Now check to see if character should be
-				 * ignored, and mask off conditions which
-				 * should be ignored.
-				if (status & info->ignore_status_mask) {
-					if (++ignored > 100)
-						break;
-					continue;
-				}
-				 */
-				status &= info->read_status_mask;
-		
-				if (status & (BD_SC_BR)) {
-#ifdef SERIAL_DEBUG_INTR
-					printk("handling break....");
-#endif
-					*tty->flip.flag_buf_ptr = TTY_BREAK;
-					if (info->flags & ASYNC_SAK)
-						do_SAK(tty);
-				} else if (status & BD_SC_PR)
-					flag = TTY_PARITY;
-				else if (status & BD_SC_FR)
-					flag = TTY_FRAME;
-			}
-			tty_insert_flip_char(tty, ch, flag);
-			if (status & BD_SC_OV)
-				/*
-				 * Overrun is special, since it's
-				 * reported immediately, and doesn't
-				 * affect the current character
-				 */
-				tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-		}
-
-		/* This BD is ready to be used again.  Clear status.
-		 * Get next BD.
-		 */
-		bdp->status |= BD_SC_EMPTY;
-		bdp->status &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV);
-
-		if (bdp->status & BD_SC_WRAP)
-			bdp = info->rx_bd_base;
-		else
-			bdp++;
-	}
-
-	info->rx_cur = (QUICC_BD *)bdp;
-
-	tty_schedule_flip(tty);
-}
-
-static _INLINE_ void receive_break(ser_info_t *info)
-{
-	struct tty_struct *tty = info->port.tty;
-
-	info->state->icount.brk++;
-	/* Check to see if there is room in the tty buffer for
-	 * the break.  If not, we exit now, losing the break.  FIXME
-	 */
-	tty_insert_flip_char(tty, 0, TTY_BREAK);
-	tty_schedule_flip(tty);
-}
-
-static _INLINE_ void transmit_chars(ser_info_t *info)
-{
-
-	if ((info->flags & TX_WAKEUP) ||
-	    (info->port.tty->flags & (1 << TTY_DO_WRITE_WAKEUP))) {
-		schedule_work(&info->tqueue);
-	}
-
-#ifdef SERIAL_DEBUG_INTR
-	printk("THRE...");
-#endif
-}
-
-#ifdef notdef
-	/* I need to do this for the SCCs, so it is left as a reminder.
-	*/
-static _INLINE_ void check_modem_status(struct async_struct *info)
-{
-	int	status;
-	/* struct	async_icount *icount; */
-	struct	async_icount_24 *icount;
-	
-	status = serial_in(info, UART_MSR);
-
-	if (status & UART_MSR_ANY_DELTA) {
-		icount = &info->state->icount;
-		/* update input line counters */
-		if (status & UART_MSR_TERI)
-			icount->rng++;
-		if (status & UART_MSR_DDSR)
-			icount->dsr++;
-		if (status & UART_MSR_DDCD) {
-			icount->dcd++;
-#ifdef CONFIG_HARD_PPS
-			if ((info->flags & ASYNC_HARDPPS_CD) &&
-			    (status & UART_MSR_DCD))
-				hardpps();
-#endif
-		}
-		if (status & UART_MSR_DCTS)
-			icount->cts++;
-		wake_up_interruptible(&info->delta_msr_wait);
-	}
-
-	if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
-#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR))
-		printk("ttys%d CD now %s...", info->line,
-		       (status & UART_MSR_DCD) ? "on" : "off");
-#endif		
-		if (status & UART_MSR_DCD)
-			wake_up_interruptible(&info->open_wait);
-		else {
-#ifdef SERIAL_DEBUG_OPEN
-			printk("scheduling hangup...");
-#endif
-			queue_task(&info->tqueue_hangup,
-					   &tq_scheduler);
-		}
-	}
-	if (info->flags & ASYNC_CTS_FLOW) {
-		if (info->port.tty->hw_stopped) {
-			if (status & UART_MSR_CTS) {
-#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
-				printk("CTS tx start...");
-#endif
-				info->port.tty->hw_stopped = 0;
-				info->IER |= UART_IER_THRI;
-				serial_out(info, UART_IER, info->IER);
-				rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
-				return;
-			}
-		} else {
-			if (!(status & UART_MSR_CTS)) {
-#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
-				printk("CTS tx stop...");
-#endif
-				info->port.tty->hw_stopped = 1;
-				info->IER &= ~UART_IER_THRI;
-				serial_out(info, UART_IER, info->IER);
-			}
-		}
-	}
-}
-#endif
-
-/*
- * This is the serial driver's interrupt routine for a single port
- */
-/* static void rs_360_interrupt(void *dev_id) */ /* until and if we start servicing irqs here */
-static void rs_360_interrupt(int vec, void *dev_id)
-{
-	u_char	events;
-	int	idx;
-	ser_info_t *info;
-	volatile struct smc_regs *smcp;
-	volatile struct scc_regs *sccp;
-	
-	info = dev_id;
-
-	idx = PORT_NUM(info->state->smc_scc_num);
-	if (info->state->smc_scc_num & NUM_IS_SCC) {
-		sccp = &pquicc->scc_regs[idx];
-		events = sccp->scc_scce;
-		if (events & SCCM_RX)
-			receive_chars(info);
-		if (events & SCCM_TX)
-			transmit_chars(info);
-		sccp->scc_scce = events;
-	} else {
-		smcp = &pquicc->smc_regs[idx];
-		events = smcp->smc_smce;
-		if (events & SMCM_BRKE)
-			receive_break(info);
-		if (events & SMCM_RX)
-			receive_chars(info);
-		if (events & SMCM_TX)
-			transmit_chars(info);
-		smcp->smc_smce = events;
-	}
-	
-#ifdef SERIAL_DEBUG_INTR
-	printk("rs_interrupt_single(%d, %x)...",
-					info->state->smc_scc_num, events);
-#endif
-#ifdef modem_control
-	check_modem_status(info);
-#endif
-	info->last_active = jiffies;
-#ifdef SERIAL_DEBUG_INTR
-	printk("end.\n");
-#endif
-}
-
-
-/*
- * -------------------------------------------------------------------
- * Here ends the serial interrupt routines.
- * -------------------------------------------------------------------
- */
-
-
-static void do_softint(void *private_)
-{
-	ser_info_t	*info = (ser_info_t *) private_;
-	struct tty_struct	*tty;
-	
-	tty = info->port.tty;
-	if (!tty)
-		return;
-
-	if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event))
-		tty_wakeup(tty);
-}
-
-
-/*
- * This routine is called from the scheduler tqueue when the interrupt
- * routine has signalled that a hangup has occurred.  The path of
- * hangup processing is:
- *
- * 	serial interrupt routine -> (scheduler tqueue) ->
- * 	do_serial_hangup() -> tty->hangup() -> rs_hangup()
- * 
- */
-static void do_serial_hangup(void *private_)
-{
-	struct async_struct	*info = (struct async_struct *) private_;
-	struct tty_struct	*tty;
-	
-	tty = info->port.tty;
-	if (!tty)
-		return;
-
-	tty_hangup(tty);
-}
-
-
-static int startup(ser_info_t *info)
-{
-	unsigned long flags;
-	int	retval=0;
-	int	idx;
-	/*struct serial_state *state = info->state;*/
-	volatile struct smc_regs *smcp;
-	volatile struct scc_regs *sccp;
-	volatile struct smc_uart_pram	*up;
-	volatile struct uart_pram	    *scup;
-
-
-	local_irq_save(flags);
-
-	if (info->flags & ASYNC_INITIALIZED) {
-		goto errout;
-	}
-
-#ifdef maybe
-	if (!state->port || !state->type) {
-		if (info->port.tty)
-			set_bit(TTY_IO_ERROR, &info->port.tty->flags);
-		goto errout;
-	}
-#endif
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk("starting up ttys%d (irq %d)...", info->line, state->irq);
-#endif
-
-
-#ifdef modem_control
-	info->MCR = 0;
-	if (info->port.tty->termios->c_cflag & CBAUD)
-		info->MCR = UART_MCR_DTR | UART_MCR_RTS;
-#endif
-	
-	if (info->port.tty)
-		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
-
-	/*
-	 * and set the speed of the serial port
-	 */
-	change_speed(info);
-
-	idx = PORT_NUM(info->state->smc_scc_num);
-	if (info->state->smc_scc_num & NUM_IS_SCC) {
-		sccp = &pquicc->scc_regs[idx];
-		scup = &pquicc->pram[info->state->port].scc.pscc.u;
-
-		scup->mrblr = RX_BUF_SIZE;
-		scup->max_idl = RX_BUF_SIZE;
-
-		sccp->scc_sccm |= (UART_SCCM_TX | UART_SCCM_RX);
-		sccp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	} else {
-		smcp = &pquicc->smc_regs[idx];
-
-		/* Enable interrupts and I/O.
-		*/
-		smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
-		smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN);
-
-		/* We can tune the buffer length and idle characters
-		 * to take advantage of the entire incoming buffer size.
-		 * If mrblr is something other than 1, maxidl has to be
-		 * non-zero or we never get an interrupt.  The maxidl
-		 * is the number of character times we wait after reception
-		 * of the last character before we decide no more characters
-		 * are coming.
-		 */
-		/* up = (smc_uart_t *)&pquicc->cp_dparam[state->port]; */
-		/* holy unionized structures, Batman: */
-		up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u;
-
-		up->mrblr = RX_BUF_SIZE;
-		up->max_idl = RX_BUF_SIZE;
-
-		up->brkcr = 1;	/* number of break chars */
-	}
-
-	info->flags |= ASYNC_INITIALIZED;
-	local_irq_restore(flags);
-	return 0;
-	
-errout:
-	local_irq_restore(flags);
-	return retval;
-}
-
-/*
- * This routine will shutdown a serial port; interrupts are disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
- */
-static void shutdown(ser_info_t *info)
-{
-	unsigned long	flags;
-	struct serial_state *state;
-	int		idx;
-	volatile struct smc_regs	*smcp;
-	volatile struct scc_regs	*sccp;
-
-	if (!(info->flags & ASYNC_INITIALIZED))
-		return;
-
-	state = info->state;
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk("Shutting down serial port %d (irq %d)....", info->line,
-	       state->irq);
-#endif
-	
-	local_irq_save(flags);
-
-	idx = PORT_NUM(state->smc_scc_num);
-	if (state->smc_scc_num & NUM_IS_SCC) {
-		sccp = &pquicc->scc_regs[idx];
-		sccp->scc_gsmr.w.low &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-#ifdef CONFIG_SERIAL_CONSOLE
-		/* We can't disable the transmitter if this is the
-		 * system console.
-		 */
-		if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT)
-#endif
-		sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
-	} else {
-		smcp = &pquicc->smc_regs[idx];
-
-		/* Disable interrupts and I/O.
-		 */
-		smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
-#ifdef CONFIG_SERIAL_CONSOLE
-		/* We can't disable the transmitter if this is the
-		 * system console.
-		 */
-		if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT)
-#endif
-			smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-	}
-	
-	if (info->port.tty)
-		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
-
-	info->flags &= ~ASYNC_INITIALIZED;
-	local_irq_restore(flags);
-}
-
-/*
- * This routine is called to set the UART divisor registers to match
- * the specified baud rate for a serial port.
- */
-static void change_speed(ser_info_t *info)
-{
-	int	baud_rate;
-	unsigned cflag, cval, scval, prev_mode;
-	int	i, bits, sbits, idx;
-	unsigned long	flags;
-	struct serial_state *state;
-	volatile struct smc_regs	*smcp;
-	volatile struct scc_regs	*sccp;
-
-	if (!info->port.tty || !info->port.tty->termios)
-		return;
-	cflag = info->port.tty->termios->c_cflag;
-
-	state = info->state;
-
-	/* Character length programmed into the mode register is the
-	 * sum of: 1 start bit, number of data bits, 0 or 1 parity bit,
-	 * 1 or 2 stop bits, minus 1.
-	 * The value 'bits' counts this for us.
-	 */
-	cval = 0;
-	scval = 0;
-
-	/* byte size and parity */
-	switch (cflag & CSIZE) {
-	      case CS5: bits = 5; break;
-	      case CS6: bits = 6; break;
-	      case CS7: bits = 7; break;
-	      case CS8: bits = 8; break;
-	      /* Never happens, but GCC is too dumb to figure it out */
-	      default:  bits = 8; break;
-	}
-	sbits = bits - 5;
-
-	if (cflag & CSTOPB) {
-		cval |= SMCMR_SL;	/* Two stops */
-		scval |= SCU_PMSR_SL;
-		bits++;
-	}
-	if (cflag & PARENB) {
-		cval |= SMCMR_PEN;
-		scval |= SCU_PMSR_PEN;
-		bits++;
-	}
-	if (!(cflag & PARODD)) {
-		cval |= SMCMR_PM_EVEN;
-		scval |= (SCU_PMSR_REVP | SCU_PMSR_TEVP);
-	}
-
-	/* Determine divisor based on baud rate */
-	i = cflag & CBAUD;
-	if (i >= (sizeof(baud_table)/sizeof(int)))
-		baud_rate = 9600;
-	else
-		baud_rate = baud_table[i];
-
-	info->timeout = (TX_BUF_SIZE*HZ*bits);
-	info->timeout += HZ/50;		/* Add .02 seconds of slop */
-
-#ifdef modem_control
-	/* CTS flow control flag and modem status interrupts */
-	info->IER &= ~UART_IER_MSI;
-	if (info->flags & ASYNC_HARDPPS_CD)
-		info->IER |= UART_IER_MSI;
-	if (cflag & CRTSCTS) {
-		info->flags |= ASYNC_CTS_FLOW;
-		info->IER |= UART_IER_MSI;
-	} else
-		info->flags &= ~ASYNC_CTS_FLOW;
-	if (cflag & CLOCAL)
-		info->flags &= ~ASYNC_CHECK_CD;
-	else {
-		info->flags |= ASYNC_CHECK_CD;
-		info->IER |= UART_IER_MSI;
-	}
-	serial_out(info, UART_IER, info->IER);
-#endif
-
-	/*
-	 * Set up parity check flag
-	 */
-	info->read_status_mask = (BD_SC_EMPTY | BD_SC_OV);
-	if (I_INPCK(info->port.tty))
-		info->read_status_mask |= BD_SC_FR | BD_SC_PR;
-	if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
-		info->read_status_mask |= BD_SC_BR;
-	
-	/*
-	 * Characters to ignore
-	 */
-	info->ignore_status_mask = 0;
-	if (I_IGNPAR(info->port.tty))
-		info->ignore_status_mask |= BD_SC_PR | BD_SC_FR;
-	if (I_IGNBRK(info->port.tty)) {
-		info->ignore_status_mask |= BD_SC_BR;
-		/*
-		 * If we're ignore parity and break indicators, ignore 
-		 * overruns too.  (For real raw support).
-		 */
-		if (I_IGNPAR(info->port.tty))
-			info->ignore_status_mask |= BD_SC_OV;
-	}
-	/*
-	 * !!! ignore all characters if CREAD is not set
-	 */
-	if ((cflag & CREAD) == 0)
-	 info->read_status_mask &= ~BD_SC_EMPTY;
-	 local_irq_save(flags);
-
-	 /* Start bit has not been added (so don't, because we would just
-	  * subtract it later), and we need to add one for the number of
-	  * stops bits (there is always at least one).
-	  */
-	 bits++;
-	 idx = PORT_NUM(state->smc_scc_num);
-	 if (state->smc_scc_num & NUM_IS_SCC) {
-         sccp = &pquicc->scc_regs[idx];
-         sccp->scc_psmr = (sbits << 12) | scval;
-     } else {
-         smcp = &pquicc->smc_regs[idx];
-
-		/* Set the mode register.  We want to keep a copy of the
-		 * enables, because we want to put them back if they were
-		 * present.
-		 */
-		prev_mode = smcp->smc_smcmr;
-		smcp->smc_smcmr = smcr_mk_clen(bits) | cval |  SMCMR_SM_UART;
-		smcp->smc_smcmr |= (prev_mode & (SMCMR_REN | SMCMR_TEN));
-	}
-
-	m360_cpm_setbrg((state - rs_table), baud_rate);
-
-	local_irq_restore(flags);
-}
-
-static void rs_360_put_char(struct tty_struct *tty, unsigned char ch)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	volatile QUICC_BD	*bdp;
-
-	if (serial_paranoia_check(info, tty->name, "rs_put_char"))
-		return 0;
-
-	if (!tty)
-		return 0;
-
-	bdp = info->tx_cur;
-	while (bdp->status & BD_SC_READY);
-
-	/* *((char *)__va(bdp->buf)) = ch; */
-	*((char *)bdp->buf) = ch;
-	bdp->length = 1;
-	bdp->status |= BD_SC_READY;
-
-	/* Get next BD.
-	*/
-	if (bdp->status & BD_SC_WRAP)
-		bdp = info->tx_bd_base;
-	else
-		bdp++;
-
-	info->tx_cur = (QUICC_BD *)bdp;
-	return 1;
-
-}
-
-static int rs_360_write(struct tty_struct * tty,
-		    const unsigned char *buf, int count)
-{
-	int	c, ret = 0;
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	volatile QUICC_BD *bdp;
-
-#ifdef CONFIG_KGDB
-	/* Try to let stub handle output. Returns true if it did. */ 
-	if (kgdb_output_string(buf, count))
-		return ret;
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "rs_write"))
-		return 0;
-
-	if (!tty) 
-		return 0;
-
-	bdp = info->tx_cur;
-
-	while (1) {
-		c = min(count, TX_BUF_SIZE);
-
-		if (c <= 0)
-			break;
-
-		if (bdp->status & BD_SC_READY) {
-			info->flags |= TX_WAKEUP;
-			break;
-		}
-
-		/* memcpy(__va(bdp->buf), buf, c); */
-		memcpy((void *)bdp->buf, buf, c);
-
-		bdp->length = c;
-		bdp->status |= BD_SC_READY;
-
-		buf += c;
-		count -= c;
-		ret += c;
-
-		/* Get next BD.
-		*/
-		if (bdp->status & BD_SC_WRAP)
-			bdp = info->tx_bd_base;
-		else
-			bdp++;
-		info->tx_cur = (QUICC_BD *)bdp;
-	}
-	return ret;
-}
-
-static int rs_360_write_room(struct tty_struct *tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	int	ret;
-
-	if (serial_paranoia_check(info, tty->name, "rs_write_room"))
-		return 0;
-
-	if ((info->tx_cur->status & BD_SC_READY) == 0) {
-		info->flags &= ~TX_WAKEUP;
-		ret = TX_BUF_SIZE;
-	}
-	else {
-		info->flags |= TX_WAKEUP;
-		ret = 0;
-	}
-	return ret;
-}
-
-/* I could track this with transmit counters....maybe later.
-*/
-static int rs_360_chars_in_buffer(struct tty_struct *tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-				
-	if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer"))
-		return 0;
-	return 0;
-}
-
-static void rs_360_flush_buffer(struct tty_struct *tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-				
-	if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
-		return;
-
-	/* There is nothing to "flush", whatever we gave the CPM
-	 * is on its way out.
-	 */
-	tty_wakeup(tty);
-	info->flags &= ~TX_WAKEUP;
-}
-
-/*
- * This function is used to send a high-priority XON/XOFF character to
- * the device
- */
-static void rs_360_send_xchar(struct tty_struct *tty, char ch)
-{
-	volatile QUICC_BD	*bdp;
-
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-
-	if (serial_paranoia_check(info, tty->name, "rs_send_char"))
-		return;
-
-	bdp = info->tx_cur;
-	while (bdp->status & BD_SC_READY);
-
-	/* *((char *)__va(bdp->buf)) = ch; */
-	*((char *)bdp->buf) = ch;
-	bdp->length = 1;
-	bdp->status |= BD_SC_READY;
-
-	/* Get next BD.
-	*/
-	if (bdp->status & BD_SC_WRAP)
-		bdp = info->tx_bd_base;
-	else
-		bdp++;
-
-	info->tx_cur = (QUICC_BD *)bdp;
-}
-
-/*
- * ------------------------------------------------------------
- * rs_throttle()
- * 
- * This routine is called by the upper-layer tty layer to signal that
- * incoming characters should be throttled.
- * ------------------------------------------------------------
- */
-static void rs_360_throttle(struct tty_struct * tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-#ifdef SERIAL_DEBUG_THROTTLE
-	char	buf[64];
-	
-	printk("throttle %s: %d....\n", _tty_name(tty, buf),
-	       tty->ldisc.chars_in_buffer(tty));
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "rs_throttle"))
-		return;
-	
-	if (I_IXOFF(tty))
-		rs_360_send_xchar(tty, STOP_CHAR(tty));
-
-#ifdef modem_control
-	if (tty->termios->c_cflag & CRTSCTS)
-		info->MCR &= ~UART_MCR_RTS;
-
-	local_irq_disable();
-	serial_out(info, UART_MCR, info->MCR);
-	local_irq_enable();
-#endif
-}
-
-static void rs_360_unthrottle(struct tty_struct * tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-#ifdef SERIAL_DEBUG_THROTTLE
-	char	buf[64];
-	
-	printk("unthrottle %s: %d....\n", _tty_name(tty, buf),
-	       tty->ldisc.chars_in_buffer(tty));
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "rs_unthrottle"))
-		return;
-	
-	if (I_IXOFF(tty)) {
-		if (info->x_char)
-			info->x_char = 0;
-		else
-			rs_360_send_xchar(tty, START_CHAR(tty));
-	}
-#ifdef modem_control
-	if (tty->termios->c_cflag & CRTSCTS)
-		info->MCR |= UART_MCR_RTS;
-	local_irq_disable();
-	serial_out(info, UART_MCR, info->MCR);
-	local_irq_enable();
-#endif
-}
-
-/*
- * ------------------------------------------------------------
- * rs_ioctl() and friends
- * ------------------------------------------------------------
- */
-
-#ifdef maybe
-/*
- * get_lsr_info - get line status register info
- *
- * Purpose: Let user call ioctl() to get info when the UART physically
- * 	    is emptied.  On bus types like RS485, the transmitter must
- * 	    release the bus after transmitting. This must be done when
- * 	    the transmit shift register is empty, not be done when the
- * 	    transmit holding register is empty.  This functionality
- * 	    allows an RS485 driver to be written in user space. 
- */
-static int get_lsr_info(struct async_struct * info, unsigned int *value)
-{
-	unsigned char status;
-	unsigned int result;
-
-	local_irq_disable();
-	status = serial_in(info, UART_LSR);
-	local_irq_enable();
-	result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
-	return put_user(result,value);
-}
-#endif
-
-static int rs_360_tiocmget(struct tty_struct *tty, struct file *file)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	unsigned int result = 0;
-#ifdef modem_control
-	unsigned char control, status;
-
-	if (serial_paranoia_check(info, tty->name, __func__))
-		return -ENODEV;
-
-	if (tty->flags & (1 << TTY_IO_ERROR))
-		return -EIO;
-
-	control = info->MCR;
-	local_irq_disable();
-	status = serial_in(info, UART_MSR);
-	local_irq_enable();
-	result =  ((control & UART_MCR_RTS) ? TIOCM_RTS : 0)
-		| ((control & UART_MCR_DTR) ? TIOCM_DTR : 0)
-#ifdef TIOCM_OUT1
-		| ((control & UART_MCR_OUT1) ? TIOCM_OUT1 : 0)
-		| ((control & UART_MCR_OUT2) ? TIOCM_OUT2 : 0)
-#endif
-		| ((status  & UART_MSR_DCD) ? TIOCM_CAR : 0)
-		| ((status  & UART_MSR_RI) ? TIOCM_RNG : 0)
-		| ((status  & UART_MSR_DSR) ? TIOCM_DSR : 0)
-		| ((status  & UART_MSR_CTS) ? TIOCM_CTS : 0);
-#endif
-	return result;
-}
-
-static int rs_360_tiocmset(struct tty_struct *tty, struct file *file,
-			   unsigned int set, unsigned int clear)
-{
-#ifdef modem_control
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
- 	unsigned int arg;
-
-	if (serial_paranoia_check(info, tty->name, __func__))
-		return -ENODEV;
-
-	if (tty->flags & (1 << TTY_IO_ERROR))
-		return -EIO;
-	/* FIXME: locking on info->mcr */
- 	if (set & TIOCM_RTS)
- 		info->mcr |= UART_MCR_RTS;
- 	if (set & TIOCM_DTR)
- 		info->mcr |= UART_MCR_DTR;
-	if (clear & TIOCM_RTS)
-		info->MCR &= ~UART_MCR_RTS;
-	if (clear & TIOCM_DTR)
-		info->MCR &= ~UART_MCR_DTR;
-
-#ifdef TIOCM_OUT1
-	if (set & TIOCM_OUT1)
-		info->MCR |= UART_MCR_OUT1;
-	if (set & TIOCM_OUT2)
-		info->MCR |= UART_MCR_OUT2;
-	if (clear & TIOCM_OUT1)
-		info->MCR &= ~UART_MCR_OUT1;
-	if (clear & TIOCM_OUT2)
-		info->MCR &= ~UART_MCR_OUT2;
-#endif
-
-	local_irq_disable();
-	serial_out(info, UART_MCR, info->MCR);
-	local_irq_enable();
-#endif
-	return 0;
-}
-
-/* Sending a break is a two step process on the SMC/SCC.  It is accomplished
- * by sending a STOP TRANSMIT command followed by a RESTART TRANSMIT
- * command.  We take advantage of the begin/end functions to make this
- * happen.
- */
-static ushort	smc_chan_map[] = {
-	CPM_CR_CH_SMC1,
-	CPM_CR_CH_SMC2
-};
-
-static ushort	scc_chan_map[] = {
-	CPM_CR_CH_SCC1,
-	CPM_CR_CH_SCC2,
-	CPM_CR_CH_SCC3,
-	CPM_CR_CH_SCC4
-};
-
-static void begin_break(ser_info_t *info)
-{
-	volatile QUICC *cp;
-	ushort	chan;
-	int     idx;
-
-	cp = pquicc;
-
-	idx = PORT_NUM(info->state->smc_scc_num);
-	if (info->state->smc_scc_num & NUM_IS_SCC)
-		chan = scc_chan_map[idx];
-	else
-		chan = smc_chan_map[idx];
-
-	cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG;
-	while (cp->cp_cr & CPM_CR_FLG);
-}
-
-static void end_break(ser_info_t *info)
-{
-	volatile QUICC *cp;
-	ushort	chan;
-	int idx;
-
-	cp = pquicc;
-
-	idx = PORT_NUM(info->state->smc_scc_num);
-	if (info->state->smc_scc_num & NUM_IS_SCC)
-		chan = scc_chan_map[idx];
-	else
-		chan = smc_chan_map[idx];
-
-	cp->cp_cr = mk_cr_cmd(chan, CPM_CR_RESTART_TX) | CPM_CR_FLG;
-	while (cp->cp_cr & CPM_CR_FLG);
-}
-
-/*
- * This routine sends a break character out the serial port.
- */
-static void send_break(ser_info_t *info, unsigned int duration)
-{
-#ifdef SERIAL_DEBUG_SEND_BREAK
-	printk("rs_send_break(%d) jiff=%lu...", duration, jiffies);
-#endif
-	begin_break(info);
-	msleep_interruptible(duration);
-	end_break(info);
-#ifdef SERIAL_DEBUG_SEND_BREAK
-	printk("done jiffies=%lu\n", jiffies);
-#endif
-}
-
-
-/*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for
- *     RI where only 0->1 is counted.
- */
-static int rs_360_get_icount(struct tty_struct *tty,
-				struct serial_icounter_struct *icount)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	struct async_icount cnow;
-
-	local_irq_disable();
-	cnow = info->state->icount;
-	local_irq_enable();
-
-	icount->cts = cnow.cts;
-	icount->dsr = cnow.dsr;
-	icount->rng = cnow.rng;
-	icount->dcd = cnow.dcd;
-
-	return 0;
-}
-
-static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
-		    unsigned int cmd, unsigned long arg)
-{
-	int error;
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	int retval;
-	struct async_icount cnow; 
-	/* struct async_icount_24 cnow;*/ 	/* kernel counter temps */
-	struct serial_icounter_struct *p_cuser;	/* user space */
-
-	if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
-		return -ENODEV;
-
-	if (cmd != TIOCMIWAIT) {
-		if (tty->flags & (1 << TTY_IO_ERROR))
-		    return -EIO;
-	}
-	
-	switch (cmd) {
-		case TCSBRK:	/* SVID version: non-zero arg --> no break */
-			retval = tty_check_change(tty);
-			if (retval)
-				return retval;
-			tty_wait_until_sent(tty, 0);
-			if (signal_pending(current))
-				return -EINTR;
-			if (!arg) {
-				send_break(info, 250);	/* 1/4 second */
-				if (signal_pending(current))
-					return -EINTR;
-			}
-			return 0;
-		case TCSBRKP:	/* support for POSIX tcsendbreak() */
-			retval = tty_check_change(tty);
-			if (retval)
-				return retval;
-			tty_wait_until_sent(tty, 0);
-			if (signal_pending(current))
-				return -EINTR;
-			send_break(info, arg ? arg*100 : 250);
-			if (signal_pending(current))
-				return -EINTR;
-			return 0;
-		case TIOCSBRK:
-			retval = tty_check_change(tty);
-			if (retval)
-				return retval;
-			tty_wait_until_sent(tty, 0);
-			begin_break(info);
-			return 0;
-		case TIOCCBRK:
-			retval = tty_check_change(tty);
-			if (retval)
-				return retval;
-			end_break(info);
-			return 0;
-#ifdef maybe
-		case TIOCSERGETLSR: /* Get line status register */
-			return get_lsr_info(info, (unsigned int *) arg);
-#endif
-		/*
-		 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
-		 * - mask passed in arg for lines of interest
- 		 *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
-		 * Caller should use TIOCGICOUNT to see which one it was
-		 */
-		 case TIOCMIWAIT:
-#ifdef modem_control
-			local_irq_disable();
-			/* note the counters on entry */
-			cprev = info->state->icount;
-			local_irq_enable();
-			while (1) {
-				interruptible_sleep_on(&info->delta_msr_wait);
-				/* see if a signal did it */
-				if (signal_pending(current))
-					return -ERESTARTSYS;
-				local_irq_disable();
-				cnow = info->state->icount; /* atomic copy */
-				local_irq_enable();
-				if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && 
-				    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
-					return -EIO; /* no change => error */
-				if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
-				     ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
-				     ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
-				     ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
-					return 0;
-				}
-				cprev = cnow;
-			}
-			/* NOTREACHED */
-#else
-			return 0;
-#endif
-
-
-		default:
-			return -ENOIOCTLCMD;
-		}
-	return 0;
-}
-
-/* FIX UP modem control here someday......
-*/
-static void rs_360_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-
-	change_speed(info);
-
-#ifdef modem_control
-	/* Handle transition to B0 status */
-	if ((old_termios->c_cflag & CBAUD) &&
-	    !(tty->termios->c_cflag & CBAUD)) {
-		info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS);
-		local_irq_disable();
-		serial_out(info, UART_MCR, info->MCR);
-		local_irq_enable();
-	}
-	
-	/* Handle transition away from B0 status */
-	if (!(old_termios->c_cflag & CBAUD) &&
-	    (tty->termios->c_cflag & CBAUD)) {
-		info->MCR |= UART_MCR_DTR;
-		if (!tty->hw_stopped ||
-		    !(tty->termios->c_cflag & CRTSCTS)) {
-			info->MCR |= UART_MCR_RTS;
-		}
-		local_irq_disable();
-		serial_out(info, UART_MCR, info->MCR);
-		local_irq_enable();
-	}
-	
-	/* Handle turning off CRTSCTS */
-	if ((old_termios->c_cflag & CRTSCTS) &&
-	    !(tty->termios->c_cflag & CRTSCTS)) {
-		tty->hw_stopped = 0;
-		rs_360_start(tty);
-	}
-#endif
-
-#if 0
-	/*
-	 * No need to wake up processes in open wait, since they
-	 * sample the CLOCAL flag once, and don't recheck it.
-	 * XXX  It's not clear whether the current behavior is correct
-	 * or not.  Hence, this may change.....
-	 */
-	if (!(old_termios->c_cflag & CLOCAL) &&
-	    (tty->termios->c_cflag & CLOCAL))
-		wake_up_interruptible(&info->open_wait);
-#endif
-}
-
-/*
- * ------------------------------------------------------------
- * rs_close()
- * 
- * This routine is called when the serial port gets closed.  First, we
- * wait for the last remaining data to be sent.  Then, we unlink its
- * async structure from the interrupt chain if necessary, and we free
- * that IRQ if nothing is left in the chain.
- * ------------------------------------------------------------
- */
-static void rs_360_close(struct tty_struct *tty, struct file * filp)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	/* struct async_state *state; */
-	struct serial_state *state;
-	unsigned long	flags;
-	int		idx;
-	volatile struct smc_regs	*smcp;
-	volatile struct scc_regs	*sccp;
-
-	if (!info || serial_paranoia_check(info, tty->name, "rs_close"))
-		return;
-
-	state = info->state;
-	
-	local_irq_save(flags);
-	
-	if (tty_hung_up_p(filp)) {
-		DBG_CNT("before DEC-hung");
-		local_irq_restore(flags);
-		return;
-	}
-	
-#ifdef SERIAL_DEBUG_OPEN
-	printk("rs_close ttys%d, count = %d\n", info->line, state->count);
-#endif
-	if ((tty->count == 1) && (state->count != 1)) {
-		/*
-		 * Uh, oh.  tty->count is 1, which means that the tty
-		 * structure will be freed.  state->count should always
-		 * be one in these conditions.  If it's greater than
-		 * one, we've got real problems, since it means the
-		 * serial port won't be shutdown.
-		 */
-		printk("rs_close: bad serial port count; tty->count is 1, "
-		       "state->count is %d\n", state->count);
-		state->count = 1;
-	}
-	if (--state->count < 0) {
-		printk("rs_close: bad serial port count for ttys%d: %d\n",
-		       info->line, state->count);
-		state->count = 0;
-	}
-	if (state->count) {
-		DBG_CNT("before DEC-2");
-		local_irq_restore(flags);
-		return;
-	}
-	info->flags |= ASYNC_CLOSING;
-	/*
-	 * Now we wait for the transmit buffer to clear; and we notify 
-	 * the line discipline to only process XON/XOFF characters.
-	 */
-	tty->closing = 1;
-	if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
-		tty_wait_until_sent(tty, info->closing_wait);
-	/*
-	 * At this point we stop accepting input.  To do this, we
-	 * disable the receive line status interrupts, and tell the
-	 * interrupt driver to stop checking the data ready bit in the
-	 * line status register.
-	 */
-	info->read_status_mask &= ~BD_SC_EMPTY;
-	if (info->flags & ASYNC_INITIALIZED) {
-
-		idx = PORT_NUM(info->state->smc_scc_num);
-		if (info->state->smc_scc_num & NUM_IS_SCC) {
-			sccp = &pquicc->scc_regs[idx];
-			sccp->scc_sccm &= ~UART_SCCM_RX;
-			sccp->scc_gsmr.w.low &= ~SCC_GSMRL_ENR;
-		} else {
-			smcp = &pquicc->smc_regs[idx];
-			smcp->smc_smcm &= ~SMCM_RX;
-			smcp->smc_smcmr &= ~SMCMR_REN;
-		}
-		/*
-		 * Before we drop DTR, make sure the UART transmitter
-		 * has completely drained; this is especially
-		 * important if there is a transmit FIFO!
-		 */
-		rs_360_wait_until_sent(tty, info->timeout);
-	}
-	shutdown(info);
-	rs_360_flush_buffer(tty);
-	tty_ldisc_flush(tty);		
-	tty->closing = 0;
-	info->event = 0;
-	info->port.tty = NULL;
-	if (info->blocked_open) {
-		if (info->close_delay) {
-			msleep_interruptible(jiffies_to_msecs(info->close_delay));
-		}
-		wake_up_interruptible(&info->open_wait);
-	}
-	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-	wake_up_interruptible(&info->close_wait);
-	local_irq_restore(flags);
-}
-
-/*
- * rs_wait_until_sent() --- wait until the transmitter is empty
- */
-static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	unsigned long orig_jiffies, char_time;
-	/*int lsr;*/
-	volatile QUICC_BD *bdp;
-	
-	if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent"))
-		return;
-
-#ifdef maybe
-	if (info->state->type == PORT_UNKNOWN)
-		return;
-#endif
-
-	orig_jiffies = jiffies;
-	/*
-	 * Set the check interval to be 1/5 of the estimated time to
-	 * send a single character, and make it at least 1.  The check
-	 * interval should also be less than the timeout.
-	 * 
-	 * Note: we have to use pretty tight timings here to satisfy
-	 * the NIST-PCTS.
-	 */
-	char_time = 1;
-	if (timeout)
-		char_time = min(char_time, (unsigned long)timeout);
-#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
-	printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time);
-	printk("jiff=%lu...", jiffies);
-#endif
-
-	/* We go through the loop at least once because we can't tell
-	 * exactly when the last character exits the shifter.  There can
-	 * be at least two characters waiting to be sent after the buffers
-	 * are empty.
-	 */
-	do {
-#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
-		printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
-#endif
-/*		current->counter = 0;	 make us low-priority */
-		msleep_interruptible(jiffies_to_msecs(char_time));
-		if (signal_pending(current))
-			break;
-		if (timeout && (time_after(jiffies, orig_jiffies + timeout)))
-			break;
-		/* The 'tx_cur' is really the next buffer to send.  We
-		 * have to back up to the previous BD and wait for it
-		 * to go.  This isn't perfect, because all this indicates
-		 * is the buffer is available.  There are still characters
-		 * in the CPM FIFO.
-		 */
-		bdp = info->tx_cur;
-		if (bdp == info->tx_bd_base)
-			bdp += (TX_NUM_FIFO-1);
-		else
-			bdp--;
-	} while (bdp->status & BD_SC_READY);
-	current->state = TASK_RUNNING;
-#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
-	printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
-#endif
-}
-
-/*
- * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
- */
-static void rs_360_hangup(struct tty_struct *tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	struct serial_state *state = info->state;
-	
-	if (serial_paranoia_check(info, tty->name, "rs_hangup"))
-		return;
-
-	state = info->state;
-	
-	rs_360_flush_buffer(tty);
-	shutdown(info);
-	info->event = 0;
-	state->count = 0;
-	info->flags &= ~ASYNC_NORMAL_ACTIVE;
-	info->port.tty = NULL;
-	wake_up_interruptible(&info->open_wait);
-}
-
-/*
- * ------------------------------------------------------------
- * rs_open() and friends
- * ------------------------------------------------------------
- */
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
-			   ser_info_t *info)
-{
-#ifdef DO_THIS_LATER
-	DECLARE_WAITQUEUE(wait, current);
-#endif
-	struct serial_state *state = info->state;
-	int		retval;
-	int		do_clocal = 0;
-
-	/*
-	 * If the device is in the middle of being closed, then block
-	 * until it's done, and then try again.
-	 */
-	if (tty_hung_up_p(filp) ||
-	    (info->flags & ASYNC_CLOSING)) {
-		if (info->flags & ASYNC_CLOSING)
-			interruptible_sleep_on(&info->close_wait);
-#ifdef SERIAL_DO_RESTART
-		if (info->flags & ASYNC_HUP_NOTIFY)
-			return -EAGAIN;
-		else
-			return -ERESTARTSYS;
-#else
-		return -EAGAIN;
-#endif
-	}
-
-	/*
-	 * If non-blocking mode is set, or the port is not enabled,
-	 * then make the check up front and then exit.
-	 * If this is an SMC port, we don't have modem control to wait
-	 * for, so just get out here.
-	 */
-	if ((filp->f_flags & O_NONBLOCK) ||
-	    (tty->flags & (1 << TTY_IO_ERROR)) ||
-	    !(info->state->smc_scc_num & NUM_IS_SCC)) {
-		info->flags |= ASYNC_NORMAL_ACTIVE;
-		return 0;
-	}
-
-	if (tty->termios->c_cflag & CLOCAL)
-		do_clocal = 1;
-	
-	/*
-	 * Block waiting for the carrier detect and the line to become
-	 * free (i.e., not in use by the callout).  While we are in
-	 * this loop, state->count is dropped by one, so that
-	 * rs_close() knows when to free things.  We restore it upon
-	 * exit, either normal or abnormal.
-	 */
-	retval = 0;
-#ifdef DO_THIS_LATER
-	add_wait_queue(&info->open_wait, &wait);
-#ifdef SERIAL_DEBUG_OPEN
-	printk("block_til_ready before block: ttys%d, count = %d\n",
-	       state->line, state->count);
-#endif
-	local_irq_disable();
-	if (!tty_hung_up_p(filp)) 
-		state->count--;
-	local_irq_enable();
-	info->blocked_open++;
-	while (1) {
-		local_irq_disable();
-		if (tty->termios->c_cflag & CBAUD)
-			serial_out(info, UART_MCR,
-				   serial_inp(info, UART_MCR) |
-				   (UART_MCR_DTR | UART_MCR_RTS));
-		local_irq_enable();
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (tty_hung_up_p(filp) ||
-		    !(info->flags & ASYNC_INITIALIZED)) {
-#ifdef SERIAL_DO_RESTART
-			if (info->flags & ASYNC_HUP_NOTIFY)
-				retval = -EAGAIN;
-			else
-				retval = -ERESTARTSYS;	
-#else
-			retval = -EAGAIN;
-#endif
-			break;
-		}
-		if (!(info->flags & ASYNC_CLOSING) &&
-		    (do_clocal || (serial_in(info, UART_MSR) &
-				   UART_MSR_DCD)))
-			break;
-		if (signal_pending(current)) {
-			retval = -ERESTARTSYS;
-			break;
-		}
-#ifdef SERIAL_DEBUG_OPEN
-		printk("block_til_ready blocking: ttys%d, count = %d\n",
-		       info->line, state->count);
-#endif
-		tty_unlock();
-		schedule();
-		tty_lock();
-	}
-	current->state = TASK_RUNNING;
-	remove_wait_queue(&info->open_wait, &wait);
-	if (!tty_hung_up_p(filp))
-		state->count++;
-	info->blocked_open--;
-#ifdef SERIAL_DEBUG_OPEN
-	printk("block_til_ready after blocking: ttys%d, count = %d\n",
-	       info->line, state->count);
-#endif
-#endif /* DO_THIS_LATER */
-	if (retval)
-		return retval;
-	info->flags |= ASYNC_NORMAL_ACTIVE;
-	return 0;
-}
-
-static int get_async_struct(int line, ser_info_t **ret_info)
-{
-	struct serial_state *sstate;
-
-	sstate = rs_table + line;
-	if (sstate->info) {
-		sstate->count++;
-		*ret_info = (ser_info_t *)sstate->info;
-		return 0;
-	}
-	else {
-		return -ENOMEM;
-	}
-}
-
-/*
- * This routine is called whenever a serial port is opened.  It
- * enables interrupts for a serial port, linking in its async structure into
- * the IRQ chain.   It also performs the serial-specific
- * initialization for the tty structure.
- */
-static int rs_360_open(struct tty_struct *tty, struct file * filp)
-{
-	ser_info_t	*info;
-	int 		retval, line;
-
-	line = tty->index;
-	if ((line < 0) || (line >= NR_PORTS))
-		return -ENODEV;
-	retval = get_async_struct(line, &info);
-	if (retval)
-		return retval;
-	if (serial_paranoia_check(info, tty->name, "rs_open"))
-		return -ENODEV;
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk("rs_open %s, count = %d\n", tty->name, info->state->count);
-#endif
-	tty->driver_data = info;
-	info->port.tty = tty;
-
-	/*
-	 * Start up serial port
-	 */
-	retval = startup(info);
-	if (retval)
-		return retval;
-
-	retval = block_til_ready(tty, filp, info);
-	if (retval) {
-#ifdef SERIAL_DEBUG_OPEN
-		printk("rs_open returning after block_til_ready with %d\n",
-		       retval);
-#endif
-		return retval;
-	}
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk("rs_open %s successful...", tty->name);
-#endif
-	return 0;
-}
-
-/*
- * /proc fs routines....
- */
-
-static inline int line_info(char *buf, struct serial_state *state)
-{
-#ifdef notdef
-	struct async_struct *info = state->info, scr_info;
-	char	stat_buf[30], control, status;
-#endif
-	int	ret;
-
-	ret = sprintf(buf, "%d: uart:%s port:%X irq:%d",
-		      state->line,
-		      (state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC",
-		      (unsigned int)(state->port), state->irq);
-
-	if (!state->port || (state->type == PORT_UNKNOWN)) {
-		ret += sprintf(buf+ret, "\n");
-		return ret;
-	}
-
-#ifdef notdef
-	/*
-	 * Figure out the current RS-232 lines
-	 */
-	if (!info) {
-		info = &scr_info;	/* This is just for serial_{in,out} */
-
-		info->magic = SERIAL_MAGIC;
-		info->port = state->port;
-		info->flags = state->flags;
-		info->quot = 0;
-		info->port.tty = NULL;
-	}
-	local_irq_disable();
-	status = serial_in(info, UART_MSR);
-	control = info ? info->MCR : serial_in(info, UART_MCR);
-	local_irq_enable();
-	
-	stat_buf[0] = 0;
-	stat_buf[1] = 0;
-	if (control & UART_MCR_RTS)
-		strcat(stat_buf, "|RTS");
-	if (status & UART_MSR_CTS)
-		strcat(stat_buf, "|CTS");
-	if (control & UART_MCR_DTR)
-		strcat(stat_buf, "|DTR");
-	if (status & UART_MSR_DSR)
-		strcat(stat_buf, "|DSR");
-	if (status & UART_MSR_DCD)
-		strcat(stat_buf, "|CD");
-	if (status & UART_MSR_RI)
-		strcat(stat_buf, "|RI");
-
-	if (info->quot) {
-		ret += sprintf(buf+ret, " baud:%d",
-			       state->baud_base / info->quot);
-	}
-
-	ret += sprintf(buf+ret, " tx:%d rx:%d",
-		      state->icount.tx, state->icount.rx);
-
-	if (state->icount.frame)
-		ret += sprintf(buf+ret, " fe:%d", state->icount.frame);
-	
-	if (state->icount.parity)
-		ret += sprintf(buf+ret, " pe:%d", state->icount.parity);
-	
-	if (state->icount.brk)
-		ret += sprintf(buf+ret, " brk:%d", state->icount.brk);	
-
-	if (state->icount.overrun)
-		ret += sprintf(buf+ret, " oe:%d", state->icount.overrun);
-
-	/*
-	 * Last thing is the RS-232 status lines
-	 */
-	ret += sprintf(buf+ret, " %s\n", stat_buf+1);
-#endif
-	return ret;
-}
-
-int rs_360_read_proc(char *page, char **start, off_t off, int count,
-		 int *eof, void *data)
-{
-	int i, len = 0;
-	off_t	begin = 0;
-
-	len += sprintf(page, "serinfo:1.0 driver:%s\n", serial_version);
-	for (i = 0; i < NR_PORTS && len < 4000; i++) {
-		len += line_info(page + len, &rs_table[i]);
-		if (len+begin > off+count)
-			goto done;
-		if (len+begin < off) {
-			begin += len;
-			len = 0;
-		}
-	}
-	*eof = 1;
-done:
-	if (off >= len+begin)
-		return 0;
-	*start = page + (begin-off);
-	return ((count < begin+len-off) ? count : begin+len-off);
-}
-
-/*
- * ---------------------------------------------------------------------
- * rs_init() and friends
- *
- * rs_init() is called at boot-time to initialize the serial driver.
- * ---------------------------------------------------------------------
- */
-
-/*
- * This routine prints out the appropriate serial driver version
- * number, and identifies which options were configured into this
- * driver.
- */
-static _INLINE_ void show_serial_version(void)
-{
- 	printk(KERN_INFO "%s version %s\n", serial_name, serial_version);
-}
-
-
-/*
- * The serial console driver used during boot.  Note that these names
- * clash with those found in "serial.c", so we currently can't support
- * the 16xxx uarts and these at the same time.  I will fix this to become
- * an indirect function call from tty_io.c (or something).
- */
-
-#ifdef CONFIG_SERIAL_CONSOLE
-
-/*
- * Print a string to the serial port trying not to disturb any possible
- * real use of the port...
- */
-static void my_console_write(int idx, const char *s,
-				unsigned count)
-{
-	struct		serial_state	*ser;
-	ser_info_t		*info;
-	unsigned		i;
-	QUICC_BD		*bdp, *bdbase;
-	volatile struct smc_uart_pram	*up;
-	volatile	u_char		*cp;
-
-	ser = rs_table + idx;
-
-
-	/* If the port has been initialized for general use, we have
-	 * to use the buffer descriptors allocated there.  Otherwise,
-	 * we simply use the single buffer allocated.
-	 */
-	if ((info = (ser_info_t *)ser->info) != NULL) {
-		bdp = info->tx_cur;
-		bdbase = info->tx_bd_base;
-	}
-	else {
-		/* Pointer to UART in parameter ram.
-		*/
-		/* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */
-		up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u;
-
-		/* Get the address of the host memory buffer.
-		 */
-		bdp = bdbase = (QUICC_BD *)((uint)pquicc + (uint)up->tbase);
-	}
-
-	/*
-	 * We need to gracefully shut down the transmitter, disable
-	 * interrupts, then send our bytes out.
-	 */
-
-	/*
-	 * Now, do each character.  This is not as bad as it looks
-	 * since this is a holding FIFO and not a transmitting FIFO.
-	 * We could add the complexity of filling the entire transmit
-	 * buffer, but we would just wait longer between accesses......
-	 */
-	for (i = 0; i < count; i++, s++) {
-		/* Wait for transmitter fifo to empty.
-		 * Ready indicates output is ready, and xmt is doing
-		 * that, not that it is ready for us to send.
-		 */
-		while (bdp->status & BD_SC_READY);
-
-		/* Send the character out.
-		 */
-		cp = bdp->buf;
-		*cp = *s;
-		
-		bdp->length = 1;
-		bdp->status |= BD_SC_READY;
-
-		if (bdp->status & BD_SC_WRAP)
-			bdp = bdbase;
-		else
-			bdp++;
-
-		/* if a LF, also do CR... */
-		if (*s == 10) {
-			while (bdp->status & BD_SC_READY);
-			/* cp = __va(bdp->buf); */
-			cp = bdp->buf;
-			*cp = 13;
-			bdp->length = 1;
-			bdp->status |= BD_SC_READY;
-
-			if (bdp->status & BD_SC_WRAP) {
-				bdp = bdbase;
-			}
-			else {
-				bdp++;
-			}
-		}
-	}
-
-	/*
-	 * Finally, Wait for transmitter & holding register to empty
-	 *  and restore the IER
-	 */
-	while (bdp->status & BD_SC_READY);
-
-	if (info)
-		info->tx_cur = (QUICC_BD *)bdp;
-}
-
-static void serial_console_write(struct console *c, const char *s,
-				unsigned count)
-{
-#ifdef CONFIG_KGDB
-	/* Try to let stub handle output. Returns true if it did. */ 
-	if (kgdb_output_string(s, count))
-		return;
-#endif
-	my_console_write(c->index, s, count);
-}
-
-
-
-/*void console_print_68360(const char *p)
-{
-	const char *cp = p;
-	int i;
-
-	for (i=0;cp[i]!=0;i++);
-
-	serial_console_write (p, i);
-
-	//Comment this if you want to have a strict interrupt-driven output
-	//rs_fair_output();
-
-	return;
-}*/
-
-
-
-
-
-
-#ifdef CONFIG_XMON
-int
-xmon_360_write(const char *s, unsigned count)
-{
-	my_console_write(0, s, count);
-	return(count);
-}
-#endif
-
-#ifdef CONFIG_KGDB
-void
-putDebugChar(char ch)
-{
-	my_console_write(0, &ch, 1);
-}
-#endif
-
-/*
- * Receive character from the serial port.  This only works well
- * before the port is initialized for real use.
- */
-static int my_console_wait_key(int idx, int xmon, char *obuf)
-{
-	struct serial_state		*ser;
-	u_char			c, *cp;
-	ser_info_t		*info;
-	QUICC_BD		*bdp;
-	volatile struct smc_uart_pram	*up;
-	int				i;
-
-	ser = rs_table + idx;
-
-	/* Get the address of the host memory buffer.
-	 * If the port has been initialized for general use, we must
-	 * use information from the port structure.
-	 */
-	if ((info = (ser_info_t *)ser->info))
-		bdp = info->rx_cur;
-	else
-		/* bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase]; */
-		bdp = (QUICC_BD *)((uint)pquicc + (uint)up->tbase);
-
-	/* Pointer to UART in parameter ram.
-	 */
-	/* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */
-	up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u;
-
-	/*
-	 * We need to gracefully shut down the receiver, disable
-	 * interrupts, then read the input.
-	 * XMON just wants a poll.  If no character, return -1, else
-	 * return the character.
-	 */
-	if (!xmon) {
-		while (bdp->status & BD_SC_EMPTY);
-	}
-	else {
-		if (bdp->status & BD_SC_EMPTY)
-			return -1;
-	}
-
-	cp = (char *)bdp->buf;
-
-	if (obuf) {
-		i = c = bdp->length;
-		while (i-- > 0)
-			*obuf++ = *cp++;
-	}
-	else {
-		c = *cp;
-	}
-	bdp->status |= BD_SC_EMPTY;
-
-	if (info) {
-		if (bdp->status & BD_SC_WRAP) {
-			bdp = info->rx_bd_base;
-		}
-		else {
-			bdp++;
-		}
-		info->rx_cur = (QUICC_BD *)bdp;
-	}
-
-	return((int)c);
-}
-
-static int serial_console_wait_key(struct console *co)
-{
-	return(my_console_wait_key(co->index, 0, NULL));
-}
-
-#ifdef CONFIG_XMON
-int
-xmon_360_read_poll(void)
-{
-	return(my_console_wait_key(0, 1, NULL));
-}
-
-int
-xmon_360_read_char(void)
-{
-	return(my_console_wait_key(0, 0, NULL));
-}
-#endif
-
-#ifdef CONFIG_KGDB
-static char kgdb_buf[RX_BUF_SIZE], *kgdp;
-static int kgdb_chars;
-
-unsigned char
-getDebugChar(void)
-{
-	if (kgdb_chars <= 0) {
-		kgdb_chars = my_console_wait_key(0, 0, kgdb_buf);
-		kgdp = kgdb_buf;
-	}
-	kgdb_chars--;
-
-	return(*kgdp++);
-}
-
-void kgdb_interruptible(int state)
-{
-}
-void kgdb_map_scc(void)
-{
-	struct		serial_state *ser;
-	uint		mem_addr;
-	volatile	QUICC_BD		*bdp;
-	volatile	smc_uart_t	*up;
-
-	cpmp = (cpm360_t *)&(((immap_t *)IMAP_ADDR)->im_cpm);
-
-	/* To avoid data cache CPM DMA coherency problems, allocate a
-	 * buffer in the CPM DPRAM.  This will work until the CPM and
-	 * serial ports are initialized.  At that time a memory buffer
-	 * will be allocated.
-	 * The port is already initialized from the boot procedure, all
-	 * we do here is give it a different buffer and make it a FIFO.
-	 */
-
-	ser = rs_table;
-
-	/* Right now, assume we are using SMCs.
-	*/
-	up = (smc_uart_t *)&cpmp->cp_dparam[ser->port];
-
-	/* Allocate space for an input FIFO, plus a few bytes for output.
-	 * Allocate bytes to maintain word alignment.
-	 */
-	mem_addr = (uint)(&cpmp->cp_dpmem[0x1000]);
-
-	/* Set the physical address of the host memory buffers in
-	 * the buffer descriptors.
-	 */
-	bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase];
-	bdp->buf = mem_addr;
-
-	bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_tbase];
-	bdp->buf = mem_addr+RX_BUF_SIZE;
-
-	up->smc_mrblr = RX_BUF_SIZE;		/* receive buffer length */
-	up->smc_maxidl = RX_BUF_SIZE;
-}
-#endif
-
-static struct tty_struct *serial_console_device(struct console *c, int *index)
-{
-	*index = c->index;
-	return serial_driver;
-}
-
-
-struct console sercons = {
- 	.name		= "ttyS",
- 	.write		= serial_console_write,
- 	.device		= serial_console_device,
- 	.wait_key	= serial_console_wait_key,
- 	.setup		= serial_console_setup,
- 	.flags		= CON_PRINTBUFFER,
- 	.index		= CONFIG_SERIAL_CONSOLE_PORT, 
-};
-
-
-
-/*
- *	Register console.
- */
-long console_360_init(long kmem_start, long kmem_end)
-{
-	register_console(&sercons);
-	/*register_console (console_print_68360); - 2.0.38 only required a write
-      function pointer. */
-	return kmem_start;
-}
-
-#endif
-
-/* Index in baud rate table of the default console baud rate.
-*/
-static	int	baud_idx;
-
-static const struct tty_operations rs_360_ops = {
-	.owner = THIS_MODULE,
-	.open = rs_360_open,
-	.close = rs_360_close,
-	.write = rs_360_write,
-	.put_char = rs_360_put_char,
-	.write_room = rs_360_write_room,
-	.chars_in_buffer = rs_360_chars_in_buffer,
-	.flush_buffer = rs_360_flush_buffer,
-	.ioctl = rs_360_ioctl,
-	.throttle = rs_360_throttle,
-	.unthrottle = rs_360_unthrottle,
-	/* .send_xchar = rs_360_send_xchar, */
-	.set_termios = rs_360_set_termios,
-	.stop = rs_360_stop,
-	.start = rs_360_start,
-	.hangup = rs_360_hangup,
-	/* .wait_until_sent = rs_360_wait_until_sent, */
-	/* .read_proc = rs_360_read_proc, */
-	.tiocmget = rs_360_tiocmget,
-	.tiocmset = rs_360_tiocmset,
-};
-
-static int __init rs_360_init(void)
-{
-	struct serial_state * state;
-	ser_info_t	*info;
-	void       *mem_addr;
-	uint 		dp_addr, iobits;
-	int		    i, j, idx;
-	ushort		chan;
-	QUICC_BD	*bdp;
-	volatile	QUICC		*cp;
-	volatile	struct smc_regs	*sp;
-	volatile	struct smc_uart_pram	*up;
-	volatile	struct scc_regs	*scp;
-	volatile	struct uart_pram	*sup;
-	/* volatile	immap_t		*immap; */
-	
-	serial_driver = alloc_tty_driver(NR_PORTS);
-	if (!serial_driver)
-		return -1;
-
-	show_serial_version();
-
-	serial_driver->name = "ttyS";
-	serial_driver->major = TTY_MAJOR;
-	serial_driver->minor_start = 64;
-	serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
-	serial_driver->subtype = SERIAL_TYPE_NORMAL;
-	serial_driver->init_termios = tty_std_termios;
-	serial_driver->init_termios.c_cflag =
-		baud_idx | CS8 | CREAD | HUPCL | CLOCAL;
-	serial_driver->flags = TTY_DRIVER_REAL_RAW;
-	tty_set_operations(serial_driver, &rs_360_ops);
-	
-	if (tty_register_driver(serial_driver))
-		panic("Couldn't register serial driver\n");
-
-	cp = pquicc;	/* Get pointer to Communication Processor */
-	/* immap = (immap_t *)IMAP_ADDR; */	/* and to internal registers */
-
-
-	/* Configure SCC2, SCC3, and SCC4 instead of port A parallel I/O.
-	 */
-	/* The "standard" configuration through the 860.
-	*/
-/* 	immap->im_ioport.iop_papar |= 0x00fc; */
-/* 	immap->im_ioport.iop_padir &= ~0x00fc; */
-/* 	immap->im_ioport.iop_paodr &= ~0x00fc; */
-	cp->pio_papar |= 0x00fc;
-	cp->pio_padir &= ~0x00fc;
-	/* cp->pio_paodr &= ~0x00fc; */
-
-
-	/* Since we don't yet do modem control, connect the port C pins
-	 * as general purpose I/O.  This will assert CTS and CD for the
-	 * SCC ports.
-	 */
-	/* FIXME: see 360um p.7-365 and 860um p.34-12 
-	 * I can't make sense of these bits - mleslie*/
-/* 	immap->im_ioport.iop_pcdir |= 0x03c6; */
-/* 	immap->im_ioport.iop_pcpar &= ~0x03c6; */
-
-/* 	cp->pio_pcdir |= 0x03c6; */
-/* 	cp->pio_pcpar &= ~0x03c6; */
-
-
-
-	/* Connect SCC2 and SCC3 to NMSI.  Connect BRG3 to SCC2 and
-	 * BRG4 to SCC3.
-	 */
-	cp->si_sicr &= ~0x00ffff00;
-	cp->si_sicr |=  0x001b1200;
-
-#ifdef CONFIG_PP04
-	/* Frequentis PP04 forced to RS-232 until we know better.
-	 * Port C 12 and 13 low enables RS-232 on SCC3 and SCC4.
-	 */
-	immap->im_ioport.iop_pcdir |= 0x000c;
-	immap->im_ioport.iop_pcpar &= ~0x000c;
-	immap->im_ioport.iop_pcdat &= ~0x000c;
-
-	/* This enables the TX driver.
-	*/
-	cp->cp_pbpar &= ~0x6000;
-	cp->cp_pbdat &= ~0x6000;
-#endif
-
-	for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) {
-		state->magic = SSTATE_MAGIC;
-		state->line = i;
-		state->type = PORT_UNKNOWN;
-		state->custom_divisor = 0;
-		state->close_delay = 5*HZ/10;
-		state->closing_wait = 30*HZ;
-		state->icount.cts = state->icount.dsr = 
-			state->icount.rng = state->icount.dcd = 0;
-		state->icount.rx = state->icount.tx = 0;
-		state->icount.frame = state->icount.parity = 0;
-		state->icount.overrun = state->icount.brk = 0;
-		printk(KERN_INFO "ttyS%d at irq 0x%02x is an %s\n",
-		       i, (unsigned int)(state->irq),
-		       (state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC");
-
-#ifdef CONFIG_SERIAL_CONSOLE
-		/* If we just printed the message on the console port, and
-		 * we are about to initialize it for general use, we have
-		 * to wait a couple of character times for the CR/NL to
-		 * make it out of the transmit buffer.
-		 */
-		if (i == CONFIG_SERIAL_CONSOLE_PORT)
-			mdelay(8);
-
-
-/* 		idx = PORT_NUM(info->state->smc_scc_num); */
-/* 		if (info->state->smc_scc_num & NUM_IS_SCC) */
-/* 			chan = scc_chan_map[idx]; */
-/* 		else */
-/* 			chan = smc_chan_map[idx]; */
-
-/* 		cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG; */
-/* 		while (cp->cp_cr & CPM_CR_FLG); */
-
-#endif
-		/* info = kmalloc(sizeof(ser_info_t), GFP_KERNEL); */
-		info = &quicc_ser_info[i];
-		if (info) {
-			memset (info, 0, sizeof(ser_info_t));
-			info->magic = SERIAL_MAGIC;
-			info->line = i;
-			info->flags = state->flags;
-			INIT_WORK(&info->tqueue, do_softint, info);
-			INIT_WORK(&info->tqueue_hangup, do_serial_hangup, info);
-			init_waitqueue_head(&info->open_wait);
-			init_waitqueue_head(&info->close_wait);
-			info->state = state;
-			state->info = (struct async_struct *)info;
-
-			/* We need to allocate a transmit and receive buffer
-			 * descriptors from dual port ram, and a character
-			 * buffer area from host mem.
-			 */
-			dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * RX_NUM_FIFO);
-
-			/* Allocate space for FIFOs in the host memory.
-			 *  (for now this is from a static array of buffers :(
-			 */
-			/* mem_addr = m360_cpm_hostalloc(RX_NUM_FIFO * RX_BUF_SIZE); */
-			/* mem_addr = kmalloc (RX_NUM_FIFO * RX_BUF_SIZE, GFP_BUFFER); */
-			mem_addr = &rx_buf_pool[i * RX_NUM_FIFO * RX_BUF_SIZE];
-
-			/* Set the physical address of the host memory
-			 * buffers in the buffer descriptors, and the
-			 * virtual address for us to work with.
-			 */
-			bdp = (QUICC_BD *)((uint)pquicc + dp_addr);
-			info->rx_cur = info->rx_bd_base = bdp;
-
-			/* initialize rx buffer descriptors */
-			for (j=0; j<(RX_NUM_FIFO-1); j++) {
-				bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE];
-				bdp->status = BD_SC_EMPTY | BD_SC_INTRPT;
-				mem_addr += RX_BUF_SIZE;
-				bdp++;
-			}
-			bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE];
-			bdp->status = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
-
-
-			idx = PORT_NUM(info->state->smc_scc_num);
-			if (info->state->smc_scc_num & NUM_IS_SCC) {
-
-#if defined (CONFIG_UCQUICC) && 1
-				/* set the transceiver mode to RS232 */
-				sipex_mode_bits &= ~(uint)SIPEX_MODE(idx,0x0f); /* clear current mode */
-				sipex_mode_bits |= (uint)SIPEX_MODE(idx,0x02);
-				*(uint *)_periph_base = sipex_mode_bits;
-				/* printk ("sipex bits = 0x%08x\n", sipex_mode_bits); */
-#endif
-			}
-
-			dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * TX_NUM_FIFO);
-
-			/* Allocate space for FIFOs in the host memory.
-			*/
-			/* mem_addr = m360_cpm_hostalloc(TX_NUM_FIFO * TX_BUF_SIZE); */
-			/* mem_addr = kmalloc (TX_NUM_FIFO * TX_BUF_SIZE, GFP_BUFFER); */
-			mem_addr = &tx_buf_pool[i * TX_NUM_FIFO * TX_BUF_SIZE];
-
-			/* Set the physical address of the host memory
-			 * buffers in the buffer descriptors, and the
-			 * virtual address for us to work with.
-			 */
-			/* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */
-			bdp = (QUICC_BD *)((uint)pquicc + dp_addr);
-			info->tx_cur = info->tx_bd_base = (QUICC_BD *)bdp;
-
-			/* initialize tx buffer descriptors */
-			for (j=0; j<(TX_NUM_FIFO-1); j++) {
-				bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE];
-				bdp->status = BD_SC_INTRPT;
-				mem_addr += TX_BUF_SIZE;
-				bdp++;
-			}
-			bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE];
-			bdp->status = (BD_SC_WRAP | BD_SC_INTRPT);
-
-			if (info->state->smc_scc_num & NUM_IS_SCC) {
-				scp = &pquicc->scc_regs[idx];
-				sup = &pquicc->pram[info->state->port].scc.pscc.u;
-				sup->rbase = dp_addr;
-				sup->tbase = dp_addr;
-
-				/* Set up the uart parameters in the
-				 * parameter ram.
-				 */
-				sup->rfcr = SMC_EB;
-				sup->tfcr = SMC_EB;
-
-				/* Set this to 1 for now, so we get single
-				 * character interrupts.  Using idle character
-				 * time requires some additional tuning.
-				 */
-				sup->mrblr = 1;
-				sup->max_idl = 0;
-				sup->brkcr = 1;
-				sup->parec = 0;
-				sup->frmer = 0;
-				sup->nosec = 0;
-				sup->brkec = 0;
-				sup->uaddr1 = 0;
-				sup->uaddr2 = 0;
-				sup->toseq = 0;
-				{
-					int i;
-					for (i=0;i<8;i++)
-						sup->cc[i] = 0x8000;
-				}
-				sup->rccm = 0xc0ff;
-
-				/* Send the CPM an initialize command.
-				*/
-				chan = scc_chan_map[idx];
-
-				/* execute the INIT RX & TX PARAMS command for this channel. */
-				cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-				while (cp->cp_cr & CPM_CR_FLG);
-
-				/* Set UART mode, 8 bit, no parity, one stop.
-				 * Enable receive and transmit.
-				 */
-				scp->scc_gsmr.w.high = 0;
-				scp->scc_gsmr.w.low = 
-					(SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
-
-				/* Disable all interrupts and clear all pending
-				 * events.
-				 */
-				scp->scc_sccm = 0;
-				scp->scc_scce = 0xffff;
-				scp->scc_dsr = 0x7e7e;
-				scp->scc_psmr = 0x3000;
-
-				/* If the port is the console, enable Rx and Tx.
-				*/
-#ifdef CONFIG_SERIAL_CONSOLE
-				if (i == CONFIG_SERIAL_CONSOLE_PORT)
-					scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-#endif
-			}
-			else {
-				/* Configure SMCs Tx/Rx instead of port B
-				 * parallel I/O.
-				 */
-				up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u;
-				up->rbase = dp_addr;
-
-				iobits = 0xc0 << (idx * 4);
-				cp->pip_pbpar |= iobits;
-				cp->pip_pbdir &= ~iobits;
-				cp->pip_pbodr &= ~iobits;
-
-
-				/* Connect the baud rate generator to the
-				 * SMC based upon index in rs_table.  Also
-				 * make sure it is connected to NMSI.
-				 */
-				cp->si_simode &= ~(0xffff << (idx * 16));
-				cp->si_simode |= (i << ((idx * 16) + 12));
-
-				up->tbase = dp_addr;
-
-				/* Set up the uart parameters in the
-				 * parameter ram.
-				 */
-				up->rfcr = SMC_EB;
-				up->tfcr = SMC_EB;
-
-				/* Set this to 1 for now, so we get single
-				 * character interrupts.  Using idle character
-				 * time requires some additional tuning.
-				 */
-				up->mrblr = 1;
-				up->max_idl = 0;
-				up->brkcr = 1;
-
-				/* Send the CPM an initialize command.
-				*/
-				chan = smc_chan_map[idx];
-
-				cp->cp_cr = mk_cr_cmd(chan,
-									  CPM_CR_INIT_TRX) | CPM_CR_FLG;
-#ifdef CONFIG_SERIAL_CONSOLE
-				if (i == CONFIG_SERIAL_CONSOLE_PORT)
-					printk("");
-#endif
-				while (cp->cp_cr & CPM_CR_FLG);
-
-				/* Set UART mode, 8 bit, no parity, one stop.
-				 * Enable receive and transmit.
-				 */
-				sp = &cp->smc_regs[idx];
-				sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
-
-				/* Disable all interrupts and clear all pending
-				 * events.
-				 */
-				sp->smc_smcm = 0;
-				sp->smc_smce = 0xff;
-
-				/* If the port is the console, enable Rx and Tx.
-				*/
-#ifdef CONFIG_SERIAL_CONSOLE
-				if (i == CONFIG_SERIAL_CONSOLE_PORT)
-					sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-#endif
-			}
-
-			/* Install interrupt handler.
-			*/
-			/* cpm_install_handler(IRQ_MACHSPEC | state->irq, rs_360_interrupt, info);  */
-			/*request_irq(IRQ_MACHSPEC | state->irq, rs_360_interrupt, */
-			request_irq(state->irq, rs_360_interrupt,
-						IRQ_FLG_LOCK, "ttyS", (void *)info);
-
-			/* Set up the baud rate generator.
-			*/
-			m360_cpm_setbrg(i, baud_table[baud_idx]);
-
-		}
-	}
-
-	return 0;
-}
-module_init(rs_360_init);
-
-/* This must always be called before the rs_360_init() function, otherwise
- * it blows away the port control information.
- */
-//static int __init serial_console_setup( struct console *co, char *options)
-int serial_console_setup( struct console *co, char *options)
-{
-	struct		serial_state	*ser;
-	uint		mem_addr, dp_addr, bidx, idx, iobits;
-	ushort		chan;
-	QUICC_BD	*bdp;
-	volatile	QUICC			*cp;
-	volatile	struct smc_regs	*sp;
-	volatile	struct scc_regs	*scp;
-	volatile	struct smc_uart_pram	*up;
-	volatile	struct uart_pram		*sup;
-
-/* mleslie TODO:
- * add something to the 68k bootloader to store a desired initial console baud rate */
-
-/* 	bd_t						*bd; */ /* a board info struct used by EPPC-bug */
-/* 	bd = (bd_t *)__res; */
-
- 	for (bidx = 0; bidx < (sizeof(baud_table) / sizeof(int)); bidx++)
-	 /* if (bd->bi_baudrate == baud_table[bidx]) */
- 		if (CONSOLE_BAUDRATE == baud_table[bidx])
-			break;
-
-	/* co->cflag = CREAD|CLOCAL|bidx|CS8; */
-	baud_idx = bidx;
-
-	ser = rs_table + CONFIG_SERIAL_CONSOLE_PORT;
-
-	cp = pquicc;	/* Get pointer to Communication Processor */
-
-	idx = PORT_NUM(ser->smc_scc_num);
-	if (ser->smc_scc_num & NUM_IS_SCC) {
-
-		/* TODO: need to set up SCC pin assignment etc. here */
-		
-	}
-	else {
-		iobits = 0xc0 << (idx * 4);
-		cp->pip_pbpar |= iobits;
-		cp->pip_pbdir &= ~iobits;
-		cp->pip_pbodr &= ~iobits;
-
-		/* Connect the baud rate generator to the
-		 * SMC based upon index in rs_table.  Also
-		 * make sure it is connected to NMSI.
-		 */
-		cp->si_simode &= ~(0xffff << (idx * 16));
-		cp->si_simode |= (idx << ((idx * 16) + 12));
-	}
-
-	/* When we get here, the CPM has been reset, so we need
-	 * to configure the port.
-	 * We need to allocate a transmit and receive buffer descriptor
-	 * from dual port ram, and a character buffer area from host mem.
-	 */
-
-	/* Allocate space for two buffer descriptors in the DP ram.
-	*/
-	dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * CONSOLE_NUM_FIFO);
-
-	/* Allocate space for two 2 byte FIFOs in the host memory.
-	 */
-	/* mem_addr = m360_cpm_hostalloc(8); */
-	mem_addr = (uint)console_fifos;
-
-
-	/* Set the physical address of the host memory buffers in
-	 * the buffer descriptors.
-	 */
-	/* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */
-	bdp = (QUICC_BD *)((uint)pquicc + dp_addr);
-	bdp->buf = (char *)mem_addr;
-	(bdp+1)->buf = (char *)(mem_addr+4);
-
-	/* For the receive, set empty and wrap.
-	 * For transmit, set wrap.
-	 */
-	bdp->status = BD_SC_EMPTY | BD_SC_WRAP;
-	(bdp+1)->status = BD_SC_WRAP;
-
-	/* Set up the uart parameters in the parameter ram.
-	 */
-	if (ser->smc_scc_num & NUM_IS_SCC) {
-		scp = &cp->scc_regs[idx];
-		/* sup = (scc_uart_t *)&cp->cp_dparam[ser->port]; */
-		sup = &pquicc->pram[ser->port].scc.pscc.u;
-
-		sup->rbase = dp_addr;
-		sup->tbase = dp_addr + sizeof(QUICC_BD);
-
-		/* Set up the uart parameters in the
-		 * parameter ram.
-		 */
-		sup->rfcr = SMC_EB;
-		sup->tfcr = SMC_EB;
-
-		/* Set this to 1 for now, so we get single
-		 * character interrupts.  Using idle character
-		 * time requires some additional tuning.
-		 */
-		sup->mrblr = 1;
-		sup->max_idl = 0;
-		sup->brkcr = 1;
-		sup->parec = 0;
-		sup->frmer = 0;
-		sup->nosec = 0;
-		sup->brkec = 0;
-		sup->uaddr1 = 0;
-		sup->uaddr2 = 0;
-		sup->toseq = 0;
-		{
-			int i;
-			for (i=0;i<8;i++)
-				sup->cc[i] = 0x8000;
-		}
-		sup->rccm = 0xc0ff;
-
-		/* Send the CPM an initialize command.
-		*/
-		chan = scc_chan_map[idx];
-
-		cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-		while (cp->cp_cr & CPM_CR_FLG);
-
-		/* Set UART mode, 8 bit, no parity, one stop.
-		 * Enable receive and transmit.
-		 */
-		scp->scc_gsmr.w.high = 0;
-		scp->scc_gsmr.w.low = 
-			(SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
-
-		/* Disable all interrupts and clear all pending
-		 * events.
-		 */
-		scp->scc_sccm = 0;
-		scp->scc_scce = 0xffff;
-		scp->scc_dsr = 0x7e7e;
-		scp->scc_psmr = 0x3000;
-
-		scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	}
-	else {
-		/* up = (smc_uart_t *)&cp->cp_dparam[ser->port]; */
-		up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u;
-
-		up->rbase = dp_addr;	/* Base of receive buffer desc. */
-		up->tbase = dp_addr+sizeof(QUICC_BD);	/* Base of xmt buffer desc. */
-		up->rfcr = SMC_EB;
-		up->tfcr = SMC_EB;
-
-		/* Set this to 1 for now, so we get single character interrupts.
-		*/
-		up->mrblr = 1;		/* receive buffer length */
-		up->max_idl = 0;		/* wait forever for next char */
-
-		/* Send the CPM an initialize command.
-		*/
-		chan = smc_chan_map[idx];
-		cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-		while (cp->cp_cr & CPM_CR_FLG);
-
-		/* Set UART mode, 8 bit, no parity, one stop.
-		 * Enable receive and transmit.
-		 */
-		sp = &cp->smc_regs[idx];
-		sp->smc_smcmr = smcr_mk_clen(9) |  SMCMR_SM_UART;
-
-		/* And finally, enable Rx and Tx.
-		*/
-		sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-	}
-
-	/* Set up the baud rate generator.
-	*/
-	/* m360_cpm_setbrg((ser - rs_table), bd->bi_baudrate); */
-	m360_cpm_setbrg((ser - rs_table), CONSOLE_BAUDRATE);
-
-	return 0;
-}
-
-/*
- * Local variables:
- *  c-indent-level: 4
- *  c-basic-offset: 4
- *  tab-width: 4
- * End:
- */