tty: move drivers/serial/ to drivers/tty/serial/

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 513 deletions

diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
deleted file mode 100644
index d89aa38c5cf..00000000000
--- a/drivers/serial/21285.c
+++ /dev/null
@@ -1,513 +0,0 @@
-/*
- * linux/drivers/serial/21285.c
- *
- * Driver for the serial port on the 21285 StrongArm-110 core logic chip.
- *
- * Based on drivers/char/serial.c
- */
-#include <linux/module.h>
-#include <linux/tty.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/device.h>
-#include <linux/tty_flip.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/hardware/dec21285.h>
-#include <mach/hardware.h>
-
-#define BAUD_BASE		(mem_fclk_21285/64)
-
-#define SERIAL_21285_NAME	"ttyFB"
-#define SERIAL_21285_MAJOR	204
-#define SERIAL_21285_MINOR	4
-
-#define RXSTAT_DUMMY_READ	0x80000000
-#define RXSTAT_FRAME		(1 << 0)
-#define RXSTAT_PARITY		(1 << 1)
-#define RXSTAT_OVERRUN		(1 << 2)
-#define RXSTAT_ANYERR		(RXSTAT_FRAME|RXSTAT_PARITY|RXSTAT_OVERRUN)
-
-#define H_UBRLCR_BREAK		(1 << 0)
-#define H_UBRLCR_PARENB		(1 << 1)
-#define H_UBRLCR_PAREVN		(1 << 2)
-#define H_UBRLCR_STOPB		(1 << 3)
-#define H_UBRLCR_FIFO		(1 << 4)
-
-static const char serial21285_name[] = "Footbridge UART";
-
-#define tx_enabled(port)	((port)->unused[0])
-#define rx_enabled(port)	((port)->unused[1])
-
-/*
- * The documented expression for selecting the divisor is:
- *  BAUD_BASE / baud - 1
- * However, typically BAUD_BASE is not divisible by baud, so
- * we want to select the divisor that gives us the minimum
- * error.  Therefore, we want:
- *  int(BAUD_BASE / baud - 0.5) ->
- *  int(BAUD_BASE / baud - (baud >> 1) / baud) ->
- *  int((BAUD_BASE - (baud >> 1)) / baud)
- */
-
-static void serial21285_stop_tx(struct uart_port *port)
-{
-	if (tx_enabled(port)) {
-		disable_irq_nosync(IRQ_CONTX);
-		tx_enabled(port) = 0;
-	}
-}
-
-static void serial21285_start_tx(struct uart_port *port)
-{
-	if (!tx_enabled(port)) {
-		enable_irq(IRQ_CONTX);
-		tx_enabled(port) = 1;
-	}
-}
-
-static void serial21285_stop_rx(struct uart_port *port)
-{
-	if (rx_enabled(port)) {
-		disable_irq_nosync(IRQ_CONRX);
-		rx_enabled(port) = 0;
-	}
-}
-
-static void serial21285_enable_ms(struct uart_port *port)
-{
-}
-
-static irqreturn_t serial21285_rx_chars(int irq, void *dev_id)
-{
-	struct uart_port *port = dev_id;
-	struct tty_struct *tty = port->state->port.tty;
-	unsigned int status, ch, flag, rxs, max_count = 256;
-
-	status = *CSR_UARTFLG;
-	while (!(status & 0x10) && max_count--) {
-		ch = *CSR_UARTDR;
-		flag = TTY_NORMAL;
-		port->icount.rx++;
-
-		rxs = *CSR_RXSTAT | RXSTAT_DUMMY_READ;
-		if (unlikely(rxs & RXSTAT_ANYERR)) {
-			if (rxs & RXSTAT_PARITY)
-				port->icount.parity++;
-			else if (rxs & RXSTAT_FRAME)
-				port->icount.frame++;
-			if (rxs & RXSTAT_OVERRUN)
-				port->icount.overrun++;
-
-			rxs &= port->read_status_mask;
-
-			if (rxs & RXSTAT_PARITY)
-				flag = TTY_PARITY;
-			else if (rxs & RXSTAT_FRAME)
-				flag = TTY_FRAME;
-		}
-
-		uart_insert_char(port, rxs, RXSTAT_OVERRUN, ch, flag);
-
-		status = *CSR_UARTFLG;
-	}
-	tty_flip_buffer_push(tty);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t serial21285_tx_chars(int irq, void *dev_id)
-{
-	struct uart_port *port = dev_id;
-	struct circ_buf *xmit = &port->state->xmit;
-	int count = 256;
-
-	if (port->x_char) {
-		*CSR_UARTDR = port->x_char;
-		port->icount.tx++;
-		port->x_char = 0;
-		goto out;
-	}
-	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
-		serial21285_stop_tx(port);
-		goto out;
-	}
-
-	do {
-		*CSR_UARTDR = xmit->buf[xmit->tail];
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		port->icount.tx++;
-		if (uart_circ_empty(xmit))
-			break;
-	} while (--count > 0 && !(*CSR_UARTFLG & 0x20));
-
-	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-		uart_write_wakeup(port);
-
-	if (uart_circ_empty(xmit))
-		serial21285_stop_tx(port);
-
- out:
-	return IRQ_HANDLED;
-}
-
-static unsigned int serial21285_tx_empty(struct uart_port *port)
-{
-	return (*CSR_UARTFLG & 8) ? 0 : TIOCSER_TEMT;
-}
-
-/* no modem control lines */
-static unsigned int serial21285_get_mctrl(struct uart_port *port)
-{
-	return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
-}
-
-static void serial21285_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-}
-
-static void serial21285_break_ctl(struct uart_port *port, int break_state)
-{
-	unsigned long flags;
-	unsigned int h_lcr;
-
-	spin_lock_irqsave(&port->lock, flags);
-	h_lcr = *CSR_H_UBRLCR;
-	if (break_state)
-		h_lcr |= H_UBRLCR_BREAK;
-	else
-		h_lcr &= ~H_UBRLCR_BREAK;
-	*CSR_H_UBRLCR = h_lcr;
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static int serial21285_startup(struct uart_port *port)
-{
-	int ret;
-
-	tx_enabled(port) = 1;
-	rx_enabled(port) = 1;
-
-	ret = request_irq(IRQ_CONRX, serial21285_rx_chars, 0,
-			  serial21285_name, port);
-	if (ret == 0) {
-		ret = request_irq(IRQ_CONTX, serial21285_tx_chars, 0,
-				  serial21285_name, port);
-		if (ret)
-			free_irq(IRQ_CONRX, port);
-	}
-
-	return ret;
-}
-
-static void serial21285_shutdown(struct uart_port *port)
-{
-	free_irq(IRQ_CONTX, port);
-	free_irq(IRQ_CONRX, port);
-}
-
-static void
-serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
-			struct ktermios *old)
-{
-	unsigned long flags;
-	unsigned int baud, quot, h_lcr, b;
-
-	/*
-	 * We don't support modem control lines.
-	 */
-	termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR);
-	termios->c_cflag |= CLOCAL;
-
-	/*
-	 * We don't support BREAK character recognition.
-	 */
-	termios->c_iflag &= ~(IGNBRK | BRKINT);
-
-	/*
-	 * Ask the core to calculate the divisor for us.
-	 */
-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 
-	quot = uart_get_divisor(port, baud);
-	b = port->uartclk / (16 * quot);
-	tty_termios_encode_baud_rate(termios, b, b);
-
-	switch (termios->c_cflag & CSIZE) {
-	case CS5:
-		h_lcr = 0x00;
-		break;
-	case CS6:
-		h_lcr = 0x20;
-		break;
-	case CS7:
-		h_lcr = 0x40;
-		break;
-	default: /* CS8 */
-		h_lcr = 0x60;
-		break;
-	}
-
-	if (termios->c_cflag & CSTOPB)
-		h_lcr |= H_UBRLCR_STOPB;
-	if (termios->c_cflag & PARENB) {
-		h_lcr |= H_UBRLCR_PARENB;
-		if (!(termios->c_cflag & PARODD))
-			h_lcr |= H_UBRLCR_PAREVN;
-	}
-
-	if (port->fifosize)
-		h_lcr |= H_UBRLCR_FIFO;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	/*
-	 * Update the per-port timeout.
-	 */
-	uart_update_timeout(port, termios->c_cflag, baud);
-
-	/*
-	 * Which character status flags are we interested in?
-	 */
-	port->read_status_mask = RXSTAT_OVERRUN;
-	if (termios->c_iflag & INPCK)
-		port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY;
-
-	/*
-	 * Which character status flags should we ignore?
-	 */
-	port->ignore_status_mask = 0;
-	if (termios->c_iflag & IGNPAR)
-		port->ignore_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY;
-	if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR)
-		port->ignore_status_mask |= RXSTAT_OVERRUN;
-
-	/*
-	 * Ignore all characters if CREAD is not set.
-	 */
-	if ((termios->c_cflag & CREAD) == 0)
-		port->ignore_status_mask |= RXSTAT_DUMMY_READ;
-
-	quot -= 1;
-
-	*CSR_UARTCON = 0;
-	*CSR_L_UBRLCR = quot & 0xff;
-	*CSR_M_UBRLCR = (quot >> 8) & 0x0f;
-	*CSR_H_UBRLCR = h_lcr;
-	*CSR_UARTCON = 1;
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static const char *serial21285_type(struct uart_port *port)
-{
-	return port->type == PORT_21285 ? "DC21285" : NULL;
-}
-
-static void serial21285_release_port(struct uart_port *port)
-{
-	release_mem_region(port->mapbase, 32);
-}
-
-static int serial21285_request_port(struct uart_port *port)
-{
-	return request_mem_region(port->mapbase, 32, serial21285_name)
-			 != NULL ? 0 : -EBUSY;
-}
-
-static void serial21285_config_port(struct uart_port *port, int flags)
-{
-	if (flags & UART_CONFIG_TYPE && serial21285_request_port(port) == 0)
-		port->type = PORT_21285;
-}
-
-/*
- * verify the new serial_struct (for TIOCSSERIAL).
- */
-static int serial21285_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
-	int ret = 0;
-	if (ser->type != PORT_UNKNOWN && ser->type != PORT_21285)
-		ret = -EINVAL;
-	if (ser->irq != NO_IRQ)
-		ret = -EINVAL;
-	if (ser->baud_base != port->uartclk / 16)
-		ret = -EINVAL;
-	return ret;
-}
-
-static struct uart_ops serial21285_ops = {
-	.tx_empty	= serial21285_tx_empty,
-	.get_mctrl	= serial21285_get_mctrl,
-	.set_mctrl	= serial21285_set_mctrl,
-	.stop_tx	= serial21285_stop_tx,
-	.start_tx	= serial21285_start_tx,
-	.stop_rx	= serial21285_stop_rx,
-	.enable_ms	= serial21285_enable_ms,
-	.break_ctl	= serial21285_break_ctl,
-	.startup	= serial21285_startup,
-	.shutdown	= serial21285_shutdown,
-	.set_termios	= serial21285_set_termios,
-	.type		= serial21285_type,
-	.release_port	= serial21285_release_port,
-	.request_port	= serial21285_request_port,
-	.config_port	= serial21285_config_port,
-	.verify_port	= serial21285_verify_port,
-};
-
-static struct uart_port serial21285_port = {
-	.mapbase	= 0x42000160,
-	.iotype		= UPIO_MEM,
-	.irq		= NO_IRQ,
-	.fifosize	= 16,
-	.ops		= &serial21285_ops,
-	.flags		= UPF_BOOT_AUTOCONF,
-};
-
-static void serial21285_setup_ports(void)
-{
-	serial21285_port.uartclk = mem_fclk_21285 / 4;
-}
-
-#ifdef CONFIG_SERIAL_21285_CONSOLE
-static void serial21285_console_putchar(struct uart_port *port, int ch)
-{
-	while (*CSR_UARTFLG & 0x20)
-		barrier();
-	*CSR_UARTDR = ch;
-}
-
-static void
-serial21285_console_write(struct console *co, const char *s,
-			  unsigned int count)
-{
-	uart_console_write(&serial21285_port, s, count, serial21285_console_putchar);
-}
-
-static void __init
-serial21285_get_options(struct uart_port *port, int *baud,
-			int *parity, int *bits)
-{
-	if (*CSR_UARTCON == 1) {
-		unsigned int tmp;
-
-		tmp = *CSR_H_UBRLCR;
-		switch (tmp & 0x60) {
-		case 0x00:
-			*bits = 5;
-			break;
-		case 0x20:
-			*bits = 6;
-			break;
-		case 0x40:
-			*bits = 7;
-			break;
-		default:
-		case 0x60:
-			*bits = 8;
-			break;
-		}
-
-		if (tmp & H_UBRLCR_PARENB) {
-			*parity = 'o';
-			if (tmp & H_UBRLCR_PAREVN)
-				*parity = 'e';
-		}
-
-		tmp = *CSR_L_UBRLCR | (*CSR_M_UBRLCR << 8);
-
-		*baud = port->uartclk / (16 * (tmp + 1));
-	}
-}
-
-static int __init serial21285_console_setup(struct console *co, char *options)
-{
-	struct uart_port *port = &serial21285_port;
-	int baud = 9600;
-	int bits = 8;
-	int parity = 'n';
-	int flow = 'n';
-
-	if (machine_is_personal_server())
-		baud = 57600;
-
-	/*
-	 * Check whether an invalid uart number has been specified, and
-	 * if so, search for the first available port that does have
-	 * console support.
-	 */
-	if (options)
-		uart_parse_options(options, &baud, &parity, &bits, &flow);
-	else
-		serial21285_get_options(port, &baud, &parity, &bits);
-
-	return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-static struct uart_driver serial21285_reg;
-
-static struct console serial21285_console =
-{
-	.name		= SERIAL_21285_NAME,
-	.write		= serial21285_console_write,
-	.device		= uart_console_device,
-	.setup		= serial21285_console_setup,
-	.flags		= CON_PRINTBUFFER,
-	.index		= -1,
-	.data		= &serial21285_reg,
-};
-
-static int __init rs285_console_init(void)
-{
-	serial21285_setup_ports();
-	register_console(&serial21285_console);
-	return 0;
-}
-console_initcall(rs285_console_init);
-
-#define SERIAL_21285_CONSOLE	&serial21285_console
-#else
-#define SERIAL_21285_CONSOLE	NULL
-#endif
-
-static struct uart_driver serial21285_reg = {
-	.owner			= THIS_MODULE,
-	.driver_name		= "ttyFB",
-	.dev_name		= "ttyFB",
-	.major			= SERIAL_21285_MAJOR,
-	.minor			= SERIAL_21285_MINOR,
-	.nr			= 1,
-	.cons			= SERIAL_21285_CONSOLE,
-};
-
-static int __init serial21285_init(void)
-{
-	int ret;
-
-	printk(KERN_INFO "Serial: 21285 driver\n");
-
-	serial21285_setup_ports();
-
-	ret = uart_register_driver(&serial21285_reg);
-	if (ret == 0)
-		uart_add_one_port(&serial21285_reg, &serial21285_port);
-
-	return ret;
-}
-
-static void __exit serial21285_exit(void)
-{
-	uart_remove_one_port(&serial21285_reg, &serial21285_port);
-	uart_unregister_driver(&serial21285_reg);
-}
-
-module_init(serial21285_init);
-module_exit(serial21285_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Intel Footbridge (21285) serial driver");
-MODULE_ALIAS_CHARDEV(SERIAL_21285_MAJOR, SERIAL_21285_MINOR);