Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (207 commits)
  [SCSI] gdth: fix CONFIG_ISA build failure
  [SCSI] esp_scsi: remove __dev{init,exit}
  [SCSI] gdth: !use_sg cleanup and use of scsi accessors
  [SCSI] gdth: Move members from SCp to gdth_cmndinfo, stage 2
  [SCSI] gdth: Setup proper per-command private data
  [SCSI] gdth: Remove gdth_ctr_tab[]
  [SCSI] gdth: switch to modern scsi host registration
  [SCSI] gdth: gdth_interrupt() gdth_get_status() & gdth_wait() fixes
  [SCSI] gdth: clean up host private data
  [SCSI] gdth: Remove virt hosts
  [SCSI] gdth: Reorder scsi_host_template intitializers
  [SCSI] gdth: kill gdth_{read,write}[bwl] wrappers
  [SCSI] gdth: Remove 2.4.x support, in-kernel changelog
  [SCSI] gdth: split out pci probing
  [SCSI] gdth: split out eisa probing
  [SCSI] gdth: split out isa probing
  gdth: Make one abuse of scsi_cmnd less obvious
  [SCSI] NCR5380: Use scsi_eh API for REQUEST_SENSE invocation
  [SCSI] usb storage: use scsi_eh API in REQUEST_SENSE execution
  [SCSI] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE
  ...

106 files changed, 13536 insertions, 18319 deletions

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 6f2c71ef47e..30905cebefb 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -272,6 +272,13 @@ config SCSI_FC_ATTRS
 	  each attached FiberChannel device to sysfs, say Y.
 	  Otherwise, say N.
 
+config SCSI_FC_TGT_ATTRS
+	bool "SCSI target support for FiberChannel Transport Attributes"
+	depends on SCSI_FC_ATTRS
+	depends on SCSI_TGT = y || SCSI_TGT = SCSI_FC_ATTRS
+	help
+		If you want to use SCSI target mode drivers enable this option.
+
 config SCSI_ISCSI_ATTRS
 	tristate "iSCSI Transport Attributes"
 	depends on SCSI && NET
@@ -289,6 +296,20 @@ config SCSI_SAS_ATTRS
 
 source "drivers/scsi/libsas/Kconfig"
 
+config SCSI_SRP_ATTRS
+	tristate "SRP Transport Attributes"
+	depends on SCSI
+	help
+	  If you wish to export transport-specific information about
+	  each attached SRP device to sysfs, say Y.
+
+config SCSI_SRP_TGT_ATTRS
+	bool "SCSI target support for SRP Transport Attributes"
+	depends on SCSI_SRP_ATTRS
+	depends on SCSI_TGT = y || SCSI_TGT = SCSI_SRP_ATTRS
+	help
+		If you want to use SCSI target mode drivers enable this option.
+
 endmenu
 
 menuconfig SCSI_LOWLEVEL
@@ -502,7 +523,6 @@ config SCSI_ADVANSYS
 	tristate "AdvanSys SCSI support"
 	depends on SCSI
 	depends on ISA || EISA || PCI
-	depends on BROKEN || X86_32
 	help
 	  This is a driver for all SCSI host adapters manufactured by
 	  AdvanSys. It is documented in the kernel source in
@@ -524,19 +544,32 @@ config SCSI_IN2000
 	  module will be called in2000.
 
 config SCSI_ARCMSR
-	tristate "ARECA ARC11X0[PCI-X]/ARC12X0[PCI-EXPRESS] SATA-RAID support"
+	tristate "ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter"
 	depends on PCI && SCSI
 	help
-	  This driver supports all of ARECA's SATA RAID controller cards.
+	  This driver supports all of ARECA's SATA/SAS RAID controller cards.
 	  This is an ARECA-maintained driver by Erich Chen.
-	  If you have any problems, please mail to: < erich@areca.com.tw >
+	  If you have any problems, please mail to: <erich@areca.com.tw>.
 	  Areca supports Linux RAID config tools.
-
-	  < http://www.areca.com.tw >
+	  Please link <http://www.areca.com.tw>
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called arcmsr (modprobe arcmsr).
 
+config SCSI_ARCMSR_AER
+	bool "Enable PCI Error Recovery Capability in Areca Driver(ARCMSR)"
+	depends on SCSI_ARCMSR && PCIEAER
+	default n
+	help
+	  The advanced error reporting(AER) capability is "NOT" provided by
+	  ARC1200/1201/1202 SATA RAID controllers cards.
+	  If your card is one of ARC1200/1201/1202, please use the default setting, n.
+	  If your card is other models, you could pick it
+	  on condition that the kernel version is greater than 2.6.19.
+	  This function is maintained driver by Nick Cheng. If you have any
+	  problems or suggestion, you are welcome to contact with <nick.cheng@areca.com.tw>.
+	  To enable this function, choose Y here.
+
 source "drivers/scsi/megaraid/Kconfig.megaraid"
 
 config SCSI_HPTIOP
@@ -836,6 +869,7 @@ config SCSI_IPS
 config SCSI_IBMVSCSI
 	tristate "IBM Virtual SCSI support"
 	depends on PPC_PSERIES || PPC_ISERIES
+	select SCSI_SRP_ATTRS
 	help
 	  This is the IBM POWER Virtual SCSI Client
 
@@ -844,7 +878,7 @@ config SCSI_IBMVSCSI
 
 config SCSI_IBMVSCSIS
 	tristate "IBM Virtual SCSI Server support"
-	depends on PPC_PSERIES && SCSI_TGT && SCSI_SRP
+	depends on PPC_PSERIES && SCSI_SRP && SCSI_SRP_TGT_ATTRS
 	help
 	  This is the SRP target driver for IBM pSeries virtual environments.
 
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 86a7ba7bad6..6141389dcdb 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_SCSI_FC_ATTRS) 	+= scsi_transport_fc.o
 obj-$(CONFIG_SCSI_ISCSI_ATTRS)	+= scsi_transport_iscsi.o
 obj-$(CONFIG_SCSI_SAS_ATTRS)	+= scsi_transport_sas.o
 obj-$(CONFIG_SCSI_SAS_LIBSAS)	+= libsas/
+obj-$(CONFIG_SCSI_SRP_ATTRS)	+= scsi_transport_srp.o
 
 obj-$(CONFIG_ISCSI_TCP) 	+= libiscsi.o	iscsi_tcp.o
 obj-$(CONFIG_INFINIBAND_ISER) 	+= libiscsi.o
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index f8e449a98d2..988f0bc5eda 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -1542,9 +1542,7 @@ part2:
 	hostdata->connected = cmd;
 	hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
 
-	if (cmd->SCp.ptr != (char *)cmd->sense_buffer) {
-		initialize_SCp(cmd);
-	}
+	initialize_SCp(cmd);
 
 	return 0;
 
@@ -2133,7 +2131,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
 				sink = 1;
 				do_abort(instance);
 				cmd->result = DID_ERROR << 16;
-				cmd->done(cmd);
+				cmd->scsi_done(cmd);
 				return;
 #endif
 				/* 
@@ -2196,7 +2194,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
 						sink = 1;
 						do_abort(instance);
 						cmd->result = DID_ERROR << 16;
-						cmd->done(cmd);
+						cmd->scsi_done(cmd);
 						/* XXX - need to source or sink data here, as appropriate */
 					} else
 						cmd->SCp.this_residual -= transfersize - len;
@@ -2280,19 +2278,16 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
 						cmd->result = (cmd->result & 0x00ffff) | (DID_ERROR << 16);
 
 #ifdef AUTOSENSE
+					if ((cmd->cmnd[0] == REQUEST_SENSE) &&
+						hostdata->ses.cmd_len) {
+						scsi_eh_restore_cmnd(cmd, &hostdata->ses);
+						hostdata->ses.cmd_len = 0 ;
+					}
+
 					if ((cmd->cmnd[0] != REQUEST_SENSE) && (status_byte(cmd->SCp.Status) == CHECK_CONDITION)) {
+						scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0);
+
 						dprintk(NDEBUG_AUTOSENSE, ("scsi%d : performing request sense\n", instance->host_no));
-						cmd->cmnd[0] = REQUEST_SENSE;
-						cmd->cmnd[1] &= 0xe0;
-						cmd->cmnd[2] = 0;
-						cmd->cmnd[3] = 0;
-						cmd->cmnd[4] = sizeof(cmd->sense_buffer);
-						cmd->cmnd[5] = 0;
-
-						cmd->SCp.buffer = NULL;
-						cmd->SCp.buffers_residual = 0;
-						cmd->SCp.ptr = (char *) cmd->sense_buffer;
-						cmd->SCp.this_residual = sizeof(cmd->sense_buffer);
 
 						LIST(cmd, hostdata->issue_queue);
 						cmd->host_scribble = (unsigned char *)
@@ -2740,7 +2735,7 @@ static int NCR5380_abort(Scsi_Cmnd * cmd) {
 			tmp->host_scribble = NULL;
 			tmp->result = DID_ABORT << 16;
 			dprintk(NDEBUG_ABORT, ("scsi%d : abort removed command from issue queue.\n", instance->host_no));
-			tmp->done(tmp);
+			tmp->scsi_done(tmp);
 			return SUCCESS;
 		}
 #if (NDEBUG  & NDEBUG_ABORT)
@@ -2805,7 +2800,7 @@ static int NCR5380_abort(Scsi_Cmnd * cmd) {
 					*prev = (Scsi_Cmnd *) tmp->host_scribble;
 					tmp->host_scribble = NULL;
 					tmp->result = DID_ABORT << 16;
-					tmp->done(tmp);
+					tmp->scsi_done(tmp);
 					return SUCCESS;
 				}
 		}
diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h
index bccf13f7153..bdc468c9e1d 100644
--- a/drivers/scsi/NCR5380.h
+++ b/drivers/scsi/NCR5380.h
@@ -30,6 +30,10 @@
 
 #include <linux/interrupt.h>
 
+#ifdef AUTOSENSE
+#include <scsi/scsi_eh.h>
+#endif
+
 #define NCR5380_PUBLIC_RELEASE 7
 #define NCR53C400_PUBLIC_RELEASE 2
 
@@ -281,6 +285,9 @@ struct NCR5380_hostdata {
 	unsigned pendingr;
 	unsigned pendingw;
 #endif
+#ifdef AUTOSENSE
+	struct scsi_eh_save ses;
+#endif
 };
 
 #ifdef __KERNEL__
diff --git a/drivers/scsi/NCR53C9x.c b/drivers/scsi/NCR53C9x.c
index 79b4df15814..96e8e29aa05 100644
--- a/