Merge branch 'upstream-fixes' into upstream

42 files changed, 573 insertions, 500 deletions

diff --git a/drivers/scsi/53c7xx.c b/drivers/scsi/53c7xx.c
index c690c2b89e4..acf292736b4 100644
--- a/drivers/scsi/53c7xx.c
+++ b/drivers/scsi/53c7xx.c
@@ -3451,12 +3451,12 @@ create_cmd (Scsi_Cmnd *cmd) {
     for (i = 0; cmd->use_sg ? (i < cmd->use_sg) : !i; cmd_datain += 4, 
 	cmd_dataout += 4, ++i) {
 	u32 vbuf = cmd->use_sg
-	    ? (u32)page_address(((struct scatterlist *)cmd->buffer)[i].page)+
-	      ((struct scatterlist *)cmd->buffer)[i].offset
+	    ? (u32)page_address(((struct scatterlist *)cmd->request_buffer)[i].page)+
+	      ((struct scatterlist *)cmd->request_buffer)[i].offset
 	    : (u32)(cmd->request_buffer);
 	u32 bbuf = virt_to_bus((void *)vbuf);
 	u32 count = cmd->use_sg ?
-	    ((struct scatterlist *)cmd->buffer)[i].length :
+	    ((struct scatterlist *)cmd->request_buffer)[i].length :
 	    cmd->request_bufflen;
 
 	/*
@@ -5417,7 +5417,7 @@ insn_to_offset (Scsi_Cmnd *cmd, u32 *insn) {
 
 	    if ((buffers = cmd->use_sg)) {
     	    	for (offset = 0, 
-		     	segment = (struct scatterlist *) cmd->buffer;
+		     	segment = (struct scatterlist *) cmd->request_buffer;
     	    	     buffers && !((found = ((ptr >= (char *)page_address(segment->page)+segment->offset) && 
     	    	    	    (ptr < ((char *)page_address(segment->page)+segment->offset+segment->length)))));
     	    	     --buffers, offset += segment->length, ++segment)
diff --git a/drivers/scsi/NCR53C9x.c b/drivers/scsi/NCR53C9x.c
index 8a4659e9410..085db4826e0 100644
--- a/drivers/scsi/NCR53C9x.c
+++ b/drivers/scsi/NCR53C9x.c
@@ -911,7 +911,7 @@ static void esp_get_dmabufs(struct NCR_ESP *esp, Scsi_Cmnd *sp)
 			sp->SCp.ptr =
 				(char *) virt_to_phys(sp->request_buffer);
 	} else {
-		sp->SCp.buffer = (struct scatterlist *) sp->buffer;
+		sp->SCp.buffer = (struct scatterlist *) sp->request_buffer;
 		sp->SCp.buffers_residual = sp->use_sg - 1;
 		sp->SCp.this_residual = sp->SCp.buffer->length;
 		if (esp->dma_mmu_get_scsi_sgl)
diff --git a/drivers/scsi/NCR_D700.c b/drivers/scsi/NCR_D700.c
index a06f547e87f..d05681f9d81 100644
--- a/drivers/scsi/NCR_D700.c
+++ b/drivers/scsi/NCR_D700.c
@@ -114,7 +114,7 @@ MODULE_DESCRIPTION("NCR Dual700 SCSI Driver");
 MODULE_LICENSE("GPL");
 module_param(NCR_D700, charp, 0);
 
-static __u8 __initdata id_array[2*(MCA_MAX_SLOT_NR + 1)] =
+static __u8 __devinitdata id_array[2*(MCA_MAX_SLOT_NR + 1)] =
 	{ [0 ... 2*(MCA_MAX_SLOT_NR + 1)-1] = 7 };
 
 #ifdef MODULE
@@ -173,7 +173,7 @@ struct NCR_D700_private {
 	char			pad;
 };
 
-static int 
+static int __devinit
 NCR_D700_probe_one(struct NCR_D700_private *p, int siop, int irq,
 		   int slot, u32 region, int differential)
 {
@@ -243,7 +243,7 @@ NCR_D700_intr(int irq, void *data, struct pt_regs *regs)
  * essentially connectecd to the MCA bus independently, it is easier
  * to set them up as two separate host adapters, rather than one
  * adapter with two channels */
-static int
+static int __devinit
 NCR_D700_probe(struct device *dev)
 {
 	struct NCR_D700_private *p;
@@ -329,7 +329,7 @@ NCR_D700_probe(struct device *dev)
 	for (i = 0; i < 2; i++) {
 		int err;
 
-		if ((err = NCR_D700_probe_one(p, i, slot, irq,
+		if ((err = NCR_D700_probe_one(p, i, irq, slot,
 					      offset_addr + (0x80 * i),
 					      differential)) != 0)
 			printk("D700: SIOP%d: probe failed, error = %d\n",
@@ -349,7 +349,7 @@ NCR_D700_probe(struct device *dev)
 	return 0;
 }
 
-static void
+static void __devexit
 NCR_D700_remove_one(struct Scsi_Host *host)
 {
 	scsi_remove_host(host);
@@ -359,7 +359,7 @@ NCR_D700_remove_one(struct Scsi_Host *host)
 	release_region(host->base, 64);
 }
 
-static int
+static int __devexit
 NCR_D700_remove(struct device *dev)
 {
 	struct NCR_D700_private *p = dev_get_drvdata(dev);
@@ -380,7 +380,7 @@ static struct mca_driver NCR_D700_driver = {
 		.name		= "NCR_D700",
 		.bus		= &mca_bus_type,
 		.probe		= NCR_D700_probe,
-		.remove		= NCR_D700_remove,
+		.remove		= __devexit_p(NCR_D700_remove),
 	},
 };
 
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index 36e63f82d9f..f974869ea32 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -551,6 +551,11 @@ struct aha152x_hostdata {
 struct aha152x_scdata {
 	Scsi_Cmnd *next;	/* next sc in queue */
 	struct semaphore *sem;	/* semaphore to block on */
+	unsigned char cmd_len;
+	unsigned char cmnd[MAX_COMMAND_SIZE];
+	unsigned short use_sg;
+	unsigned request_bufflen;
+	void *request_buffer;
 };
 
 
@@ -1006,11 +1011,20 @@ static int aha152x_internal_queue(Scsi_Cmnd *SCpnt, struct semaphore *sem, int p
 			return FAILED;
 		}
 	} else {
+		struct aha152x_scdata *sc;
+
 		SCpnt->host_scribble = kmalloc(sizeof(struct aha152x_scdata), GFP_ATOMIC);
 		if(SCpnt->host_scribble==0) {
 			printk(ERR_LEAD "allocation failed\n", CMDINFO(SCpnt));
 			return FAILED;
 		}
+
+		sc = SCDATA(SCpnt);
+		memcpy(sc->cmnd, SCpnt->cmnd, sizeof(sc->cmnd));
+		sc->request_buffer  = SCpnt->request_buffer;
+		sc->request_bufflen = SCpnt->request_bufflen;
+		sc->use_sg          = SCpnt->use_sg;
+		sc->cmd_len         = SCpnt->cmd_len;
 	}
 
 	SCNEXT(SCpnt)		= NULL;
@@ -1165,6 +1179,10 @@ static int aha152x_device_reset(Scsi_Cmnd * SCpnt)
 	DECLARE_MUTEX_LOCKED(sem);
 	struct timer_list timer;
 	int ret, issued, disconnected;
+	unsigned char old_cmd_len = SCpnt->cmd_len;
+	unsigned short old_use_sg = SCpnt->use_sg;
+	void *old_buffer = SCpnt->request_buffer;
+	unsigned old_bufflen = SCpnt->request_bufflen;
 	unsigned long flags;
 
 #if defined(AHA152X_DEBUG)
@@ -1198,11 +1216,11 @@ static int aha152x_device_reset(Scsi_Cmnd * SCpnt)
 	add_timer(&timer);
 	down(&sem);
 	del_timer(&timer);
-	
-	SCpnt->cmd_len         = SCpnt->old_cmd_len;
-	SCpnt->use_sg          = SCpnt->old_use_sg;
-  	SCpnt->request_buffer  = SCpnt->buffer;
-       	SCpnt->request_bufflen = SCpnt->bufflen;
+
+	SCpnt->cmd_len         = old_cmd_len;
+	SCpnt->use_sg          = old_use_sg;
+  	SCpnt->request_buffer  = old_buffer;
+       	SCpnt->request_bufflen = old_bufflen;
 
 	DO_LOCK(flags);
 
@@ -1565,6 +1583,9 @@ static void busfree_run(struct Scsi_Host *shpnt)
 #endif
 
 		if(DONE_SC->SCp.phase & check_condition) {
+			struct scsi_cmnd *cmd = HOSTDATA(shpnt)->done_SC;
+			struct aha152x_scdata *sc = SCDATA(cmd);
+
 #if 0
 			if(HOSTDATA(shpnt)->debug & debug_eh) {
 				printk(ERR_LEAD "received sense: ", CMDINFO(DONE_SC));
@@ -1573,13 +1594,13 @@ static void busfree_run(struct Scsi_Host *shpnt)
 #endif
 
 			/* restore old command */
-			memcpy((void *) DONE_SC->cmnd, (void *) DONE_SC->data_cmnd, sizeof(DONE_SC->data_cmnd));
-			DONE_SC->request_buffer  = DONE_SC->buffer;
-			DONE_SC->request_bufflen = DONE_SC->bufflen;
-			DONE_SC->use_sg          = DONE_SC->old_use_sg;
-			DONE_SC->cmd_len         = DONE_SC->old_cmd_len;
+			memcpy(cmd->cmnd, sc->cmnd, sizeof(sc->cmnd));
+			cmd->request_buffer  = sc->request_buffer;
+			cmd->request_bufflen = sc->request_bufflen;
+			cmd->use_sg          = sc->use_sg;
+			cmd->cmd_len         = sc->cmd_len;
 
-			DONE_SC->SCp.Status = 0x02;
+			cmd->SCp.Status = 0x02;
 
 			HOSTDATA(shpnt)->commands--;
 			if (!HOSTDATA(shpnt)->commands)
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index a1e8ca75859..653818d2f80 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -7289,7 +7289,7 @@ ahd_reset_cmds_pending(struct ahd_softc *ahd)
 	ahd->flags &= ~AHD_UPDATE_PEND_CMDS;
 }
 
-void
+static void
 ahd_done_with_status(struct ahd_softc *ahd, struct scb *scb, uint32_t status)
 {
 	cam_status ostat;
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index b244c712417..998999c0a97 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -243,25 +243,6 @@ ahd_print_path(struct ahd_softc *ahd, struct scb *scb)
 static uint32_t aic79xx_no_reset;
 
 /*
- * Certain PCI motherboards will scan PCI devices from highest to lowest,
- * others scan from lowest to highest, and they tend to do all kinds of
- * strange things when they come into contact with PCI bridge chips.  The
- * net result of all this is that the PCI card that is actually used to boot
- * the machine is very hard to detect.  Most motherboards go from lowest
- * PCI slot number to highest, and the first SCSI controller found is the
- * one you boot from.  The only exceptions to this are when a controller
- * has its BIOS disabled.  So, we by default sort all of our SCSI controllers
- * from lowest PCI slot number to highest PCI slot number.  We also force
- * all controllers with their BIOS disabled to the end of the list.  This
- * works on *almost* all computers.  Where it doesn't work, we have this
- * option.  Setting this option to non-0 will reverse the order of the sort
- * to highest first, then lowest, but will still leave cards with their BIOS
- * disabled at the very end.  That should fix everyone up unless there are
- * really strange cirumstances.
- */
-static uint32_t aic79xx_reverse_scan;
-
-/*
  * Should we force EXTENDED translation on a controller.
  *     0 == Use whatever is in the SEEPROM or default to off
  *     1 == Use whatever is in the SEEPROM or default to on
@@ -350,7 +331,6 @@ MODULE_PARM_DESC(aic79xx,
 "				periodically to prevent tag starvation.\n"
 "				This may be required by some older disk\n"
 "				or drives/RAID arrays.\n"
-"	reverse_scan		Sort PCI devices highest Bus/Slot to lowest\n"
 "	tag_info:<tag_str>	Set per-target tag depth\n"
 "	global_tag_depth:<int>	Global tag depth for all targets on all buses\n"
 "	slewrate:<slewrate_list>Set the signal slew rate (0-15).\n"
@@ -1031,7 +1011,6 @@ aic79xx_setup(char *s)
 #ifdef AHD_DEBUG
 		{ "debug", &ahd_debug },
 #endif
-		{ "reverse_scan", &aic79xx_reverse_scan },
 		{ "periodic_otag", &aic79xx_periodic_otag },
 		{ "pci_parity", &aic79xx_pci_parity },
 		{ "seltime", &aic79xx_seltime },
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index debf3e2a079..aa4be8a3141 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -353,7 +353,6 @@ MODULE_PARM_DESC(aic7xxx,
 "				periodically to prevent tag starvation.\n"
 "				This may be required by some older disk\n"
 "				drives or RAID arrays.\n"
-"	reverse_scan		Sort PCI devices highest Bus/Slot to lowest\n"
 "	tag_info:<tag_str>	Set per-target tag depth\n"
 "	global_tag_depth:<int>	Global tag depth for every target\n"
 "				on every bus\n"
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 007a14e5c3f..e397129c90d 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -507,7 +507,7 @@ static __inline__ void initialize_SCp(Scsi_Cmnd *cmd)
      */
 
     if (cmd->use_sg) {
-	cmd->SCp.buffer = (struct scatterlist *) cmd->buffer;
+	cmd->SCp.buffer = (struct scatterlist *) cmd->request_buffer;
 	cmd->SCp.buffers_residual = cmd->use_sg - 1;
 	cmd->SCp.ptr = (char *)page_address(cmd->SCp.buffer->page)+
 		       cmd->SCp.buffer->offset;
diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index dddd2acce76..61f6024b61b 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -5,6 +5,7 @@
  * Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 07 3 May 2002)
  *   by D. Gilbert and aeb (20020609)
  * Additions for SPC-3 T10/1416-D Rev 21 22 Sept 2004, D. Gilbert 20041025
+ * Update to SPC-4 T10/1713-D Rev 5a, 14 June 2006, D. Gilbert 20060702
  */
 
 #include <linux/blkdev.h>
@@ -36,55 +37,56 @@ static const char * cdb_byte0_names[] = {
 /* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense",
 /* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL,
 	    "Reasssign Blocks",
-/* 08-0d */ "Read (6)", NULL, "Write (6)", "Seek (6)", NULL, NULL,
+/* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL,
 /* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry",  
-/* 13-16 */ "Verify (6)", "Recover Buffered Data", "Mode Select (6)",
-	    "Reserve (6)",
-/* 17-1a */ "Release (6)", "Copy", "Erase", "Mode Sense (6)", 
+/* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)",
+	    "Reserve(6)",
+/* 17-1a */ "Release(6)", "Copy", "Erase", "Mode Sense(6)",
 /* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic", 
 /* 1e-1f */ "Prevent/Allow Medium Removal", NULL,
 /* 20-22 */  NULL, NULL, NULL,
 /* 23-28 */ "Read Format Capacities", "Set Window",
-	    "Read Capacity (10)", NULL, NULL, "Read (10)", 
-/* 29-2d */ "Read Generation", "Write (10)", "Seek (10)", "Erase (10)", 
-            "Read updated block", 
-/* 2e-31 */ "Write Verify (10)", "Verify (10)", "Search High", "Search Equal", 
+	    "Read Capacity(10)", NULL, NULL, "Read(10)",
+/* 29-2d */ "Read Generation", "Write(10)", "Seek(10)", "Erase(10)",
+            "Read updated block",
+/* 2e-31 */ "Write Verify(10)", "Verify(10)", "Search High", "Search Equal",
 /* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position", 
-/* 35-37 */ "Synchronize Cache (10)", "Lock/Unlock Cache (10)",
+/* 35-37 */ "Synchronize Cache(10)", "Lock/Unlock Cache(10)",
 	    "Read Defect Data(10)", 
 /* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer", 
             "Read Buffer", 
-/* 3d-3f */ "Update Block", "Read Long (10)",  "Write Long (10)",
-/* 40-41 */ "Change Definition", "Write Same (10)",
+/* 3d-3f */ "Update Block", "Read Long(10)",  "Write Long(10)",
+/* 40-41 */ "Change Definition", "Write Same(10)",
 /* 42-48 */ "Read sub-channel", "Read TOC/PMA/ATIP", "Read density support",
-            "Play audio (10)", "Get configuration", "Play audio msf",
+            "Play audio(10)", "Get configuration", "Play audio msf",
             "Play audio track/index",
-/* 49-4f */ "Play track relative (10)", "Get event status notification",
+/* 49-4f */ "Play track relative(10)", "Get event status notification",
             "Pause/resume", "Log Select", "Log Sense", "Stop play/scan",
             NULL,
 /* 50-55 */ "Xdwrite", "Xpwrite, Read disk info", "Xdread, Read track info",
-            "Reserve track", "Send OPC info", "Mode Select (10)",
-/* 56-5b */ "Reserve (10)", "Release (10)", "Repair track", "Read master cue",
-            "Mode Sense (10)", "Close track/session",
+            "Reserve track", "Send OPC info", "Mode Select(10)",
+/* 56-5b */ "Reserve(10)", "Release(10)", "Repair track", "Read master cue",
+            "Mode Sense(10)", "Close track/session",
 /* 5c-5f */ "Read buffer capacity", "Send cue sheet", "Persistent reserve in",
             "Persistent reserve out",
 /* 60-67 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 /* 68-6f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 /* 70-77 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 /* 78-7f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, "Variable length",
-/* 80-84 */ "Xdwrite (16)", "Rebuild (16)", "Regenerate (16)", "Extended copy",
+/* 80-84 */ "Xdwrite(16)", "Rebuild(16)", "Regenerate(16)", "Extended copy",
             "Receive copy results",
-/* 85-89 */ "Memory Export In (16)", "Access control in", "Access control out",
-            "Read (16)", "Memory Export Out (16)",
-/* 8a-8f */ "Write (16)", NULL, "Read attributes", "Write attributes",
-            "Write and verify (16)", "Verify (16)",
-/* 90-94 */ "Pre-fetch (16)", "Synchronize cache (16)",
-            "Lock/unlock cache (16)", "Write same (16)", NULL,
+/* 85-89 */ "ATA command pass through(16)", "Access control in",
+	    "Access control out", "Read(16)", "Memory Export Out(16)",
+/* 8a-8f */ "Write(16)", NULL, "Read attributes", "Write attributes",
+            "Write and verify(16)", "Verify(16)",
+/* 90-94 */ "Pre-fetch(16)", "Synchronize cache(16)",
+            "Lock/unlock cache(16)", "Write same(16)", NULL,
 /* 95-99 */ NULL, NULL, NULL, NULL, NULL,
-/* 9a-9f */ NULL, NULL, NULL, NULL, "Service action in (16)",
-            "Service action out (16)",
-/* a0-a5 */ "Report luns", "Blank", "Send event", "Maintenance in",
-            "Maintenance out", "Move medium/play audio(12)",
+/* 9a-9f */ NULL, NULL, NULL, NULL, "Service action in(16)",
+            "Service action out(16)",
+/* a0-a5 */ "Report luns", "ATA command pass through(12)/Blank",
+            "Security protocol in", "Maintenance in", "Maintenance out",
+	    "Move medium/play audio(12)",
 /* a6-a9 */ "Exchange medium", "Move medium attached", "Read(12)",
             "Play track relative(12)",
 /* aa-ae */ "Write(12)", NULL, "Erase(12), Get Performance",
@@ -92,12 +94,12 @@ static const char * cdb_byte0_names[] = {
 /* af-b1 */ "Verify(12)", "Search data high(12)", "Search data equal(12)",
 /* b2-b4 */ "Search data low(12)", "Set limits(12)",
             "Read element status attached",
-/* b5-b6 */ "Request volume element address", "Send volume tag, set streaming",
+/* b5-b6 */ "Security protocol out", "Send volume tag, set streaming",
 /* b7-b9 */ "Read defect data(12)", "Read element status", "Read CD msf",
 /* ba-bc */ "Redundancy group (in), Scan",
-            "Redundancy group (out), Set cd-rom speed", "Spare in, Play cd",
-/* bd-bf */ "Spare out, Mechanism status", "Volume set in, Read cd",
-            "Volume set out, Send DVD structure",
+            "Redundancy group (out), Set cd-rom speed", "Spare (in), Play cd",
+/* bd-bf */ "Spare (out), Mechanism status", "Volume set (in), Read cd",
+            "Volume set (out), Send DVD structure",
 };
 
 struct value_name_pair {
@@ -112,6 +114,7 @@ static const struct value_name_pair maint_in_arr[] = {
 	{0xc, "Report supported operation codes"},
 	{0xd, "Report supported task management functions"},
 	{0xe, "Report priority"},
+	{0xf, "Report timestamp"},
 };
 #define MAINT_IN_SZ ARRAY_SIZE(maint_in_arr)
 
@@ -120,6 +123,7 @@ static const struct value_name_pair maint_out_arr[] = {
 	{0xa, "Set target port groups"},
 	{0xb, "Change aliases"},
 	{0xe, "Set priority"},
+	{0xe, "Set timestamp"},
 };
 #define MAINT_OUT_SZ ARRAY_SIZE(maint_out_arr)
 
@@ -427,6 +431,7 @@ static struct error_info additional[] =
 	{0x001A, "Rewind operation in progress"},
 	{0x001B, "Set capacity operation in progress"},
 	{0x001C, "Verify operation in progress"},
+	{0x001D, "ATA pass through information available"},
 
 	{0x0100, "No index/sector signal"},
 
@@ -438,7 +443,7 @@ static struct error_info additional[] =
 
 	{0x0400, "Logical unit not ready, cause not reportable"},
 	{0x0401, "Logical unit is in process of becoming ready"},
-	{0x0402, "Logical unit not ready, initializing cmd. required"},
+	{0x0402, "Logical unit not ready, initializing command required"},
 	{0x0403, "Logical unit not ready, manual intervention required"},
 	{0x0404, "Logical unit not ready, format in progress"},
 	{0x0405, "Logical unit not ready, rebuild in progress"},
@@ -478,6 +483,9 @@ static struct error_info additional[] =
 	{0x0B00, "Warning"},
 	{0x0B01, "Warning - specified temperature exceeded"},
 	{0x0B02, "Warning - enclosure degraded"},
+	{0x0B03, "Warning - background self-test failed"},
+	{0x0B04, "Warning - background pre-scan detected medium error"},
+	{0x0B05, "Warning - background medium scan detected medium error"},
 
 	{0x0C00, "Write error"},
 	{0x0C01, "Write error - recovered with auto reallocation"},
@@ -493,6 +501,7 @@ static struct error_info additional[] =
 	{0x0C0B, "Auxiliary memory write error"},
 	{0x0C0C, "Write error - unexpected unsolicited data"},
 	{0x0C0D, "Write error - not enough unsolicited data"},
+	{0x0C0F, "Defects in error window"},
 
 	{0x0D00, "Error detected by third party temporary initiator"},
 	{0x0D01, "Third party device failure"},
@@ -504,11 +513,12 @@ static struct error_info additional[] =
 	{0x0E00, "Invalid information unit"},
 	{0x0E01, "Information unit too short"},
 	{0x0E02, "Information unit too long"},
+	{0x0E03, "Invalid field in command information unit"},
 
 	{0x1000, "Id CRC or ECC error"},
-	{0x1001, "Data block guard check failed"},
-	{0x1002, "Data block application tag check failed"},
-	{0x1003, "Data block reference tag check failed"},
+	{0x1001, "Logical block guard check failed"},
+	{0x1002, "Logical block application tag check failed"},
+	{0x1003, "Logical block reference tag check failed"},
 
 	{0x1100, "Unrecovered read error"},
 	{0x1101, "Read retries exhausted"},
@@ -530,6 +540,7 @@ static struct error_info additional[] =
 	{0x1111, "Read error - loss of streaming"},
 	{0x1112, "Auxiliary memory read error"},
 	{0x1113, "Read error - failed retransmission request"},
+	{0x1114, "Read error - lba marked bad by application client"},
 
 	{0x1200, "Address mark not found for id field"},
 
@@ -610,11 +621,14 @@ static struct error_info additional[] =
 	{0x2100, "Logical block address out of range"},
 	{0x2101, "Invalid element address"},
 	{0x2102, "Invalid address for write"},
+	{0x2103, "Invalid write crossing layer jump"},
 
 	{0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"},
 
 	{0x2400, "Invalid field in cdb"},
 	{0x2401, "CDB decryption error"},
+	{0x2402, "Obsolete"},
+	{0x2403, "Obsolete"},
 	{0x2404, "Security audit value frozen"},
 	{0x2405, "Security working key frozen"},
 	{0x2406, "Nonce not unique"},
@@ -637,7 +651,10 @@ static struct error_info additional[] =
 	{0x260C, "Invalid operation for copy source or destination"},
 	{0x260D, "Copy segment granularity violation"},
 	{0x260E, "Invalid parameter while port is enabled"},
-	{0x260F, "Invalid data-out buffer integrity"},
+	{0x260F, "Invalid data-out buffer integrity check value"},
+	{0x2610, "Data decryption key fail limit reached"},
+	{0x2611, "Incomplete key-associated data set"},
+	{0x2612, "Vendor specific key reference not found"},
 
 	{0x2700, "Write protected"},
 	{0x2701, "Hardware write protected"},
@@ -649,6 +666,7 @@ static struct error_info additional[] =
 
 	{0x2800, "Not ready to ready change, medium may have changed"},
 	{0x2801, "Import or export element accessed"},
+	{0x2802, "Format-layer may have changed"},
 
 	{0x2900, "Power on, reset, or bus device reset occurred"},
 	{0x2901, "Power on occurred"},
@@ -669,6 +687,11 @@ static struct error_info additional[] =
 	{0x2A07, "Implicit asymmetric access state transition failed"},
 	{0x2A08, "Priority changed"},
 	{0x2A09, "Capacity data has changed"},
+	{0x2A10, "Timestamp changed"},
+	{0x2A11, "Data encryption parameters changed by another i_t nexus"},
+	{0x2A12, "Data encryption parameters changed by vendor specific "
+		 "event"},
+	{0x2A13, "Data encryption key instance counter has changed"},
 
 	{0x2B00, "Copy cannot execute since host cannot disconnect"},
 
@@ -690,6 +713,7 @@ static struct error_info additional[] =
 	{0x2E00, "Insufficient time for operation"},
 
 	{0x2F00, "Commands cleared by another initiator"},
+	{0x2F01, "Commands cleared by power loss notification"},
 
 	{0x3000, "Incompatible medium installed"},
 	{0x3001, "Cannot read medium - unknown format"},
@@ -702,7 +726,8 @@ static struct error_info additional[] =
 	{0x3008, "Cannot write - application code mismatch"},
 	{0x3009, "Current session not fixated for append"},
 	{0x300A, "Cleaning request rejected"},
-	{0x300C, "WORM medium, overwrite attempted"},
+	{0x300C, "WORM medium - overwrite attempted"},
+	{0x300D, "WORM medium - integrity check"},
 	{0x3010, "Medium not formatted"},
 
 	{0x3100, "Medium format corrupted"},
@@ -790,6 +815,9 @@ static struct error_info additional[] =
 	{0x3F0F, "Echo buffer overwritten"},
 	{0x3F10, "Medium loadable"},
 	{0x3F11, "Medium auxiliary memory accessible"},
+	{0x3F12, "iSCSI IP address added"},
+	{0x3F13, "iSCSI IP address removed"},
+	{0x3F14, "iSCSI IP address changed"},
 /*
  *	{0x40NN, "Ram failure"},
  *	{0x40NN, "Diagnostic failure on component nn"},
@@ -799,6 +827,7 @@ static struct error_info additional[] =
 	{0x4300, "Message error"},
 
 	{0x4400, "Internal target failure"},
+	{0x4471, "ATA device failed set features"},
 
 	{0x4500, "Select or reselect failure"},
 
@@ -807,9 +836,10 @@ static struct error_info additional[] =
 	{0x4700, "Scsi parity error"},
 	{0x4701, "Data phase CRC error detected"},
 	{0x4702, "Scsi parity error detected during st data phase"},
-	{0x4703, "Information unit CRC error detected"},
+	{0x4703, "Information unit iuCRC error detected"},
 	{0x4704, "Asynchronous information protection error detected"},
 	{0x4705, "Protocol service CRC error"},
+	{0x4706, "Phy test function in progress"},
 	{0x477f, "Some commands cleared by iSCSI Protocol event"},
 
 	{0x4800, "Initiator detected error message received"},
@@ -844,6 +874,8 @@ static struct error_info additional[] =
 	{0x5300, "Media load or eject failed"},
 	{0x5301, "Unload tape failure"},
 	{0x5302, "Medium removal prevented"},
+	{0x5303, "Medium removal prevented by data transfer element"},
+	{0x5304, "Medium thread or unthread failure"},
 
 	{0x5400, "Scsi to host system interface failure"},
 
@@ -855,6 +887,7 @@ static struct error_info additional[] =
 	{0x5505, "Insufficient access control resources"},
 	{0x5506, "Auxiliary memory out of space"},
 	{0x5507, "Quota error"},
+	{0x5508, "Maximum number of supplemental decryption keys exceeded"},
 
 	{0x5700, "Unable to recover table-of-contents"},
 
@@ -1004,6 +1037,7 @@ static struct error_info additional[] =
 	{0x6708, "Assign failure occurred"},
 	{0x6709, "Multiply assigned logical unit"},
 	{0x670A, "Set target port groups command failed"},
+	{0x670B, "ATA device feature not enabled"},
 
 	{0x6800, "Logical unit not configured"},
 
@@ -1030,6 +1064,8 @@ static struct error_info additional[] =
 	{0x6F03, "Read of scrambled sector without authentication"},
 	{0x6F04, "Media region code is mismatched to logical unit region"},
 	{0x6F05, "Drive region must be permanent/region reset count error"},
+	{0x6F06, "Insufficient block count for binding nonce recording"},
+	{0x6F07, "Conflict in binding nonce recording"},
 /*
  *	{0x70NN, "Decompression exception short algorithm id of nn"},
  */
@@ -1041,6 +1077,8 @@ static struct error_info additional[