Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

74 files changed, 16728 insertions, 3879 deletions

diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index e7ad269041a..4ce7438608e 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -857,7 +857,7 @@ process_extended_message(struct Scsi_Host *host,
 		printk(KERN_INFO "scsi%d (%d:%d): Unexpected message %s: ",
 		       host->host_no, pun, lun,
 		       NCR_700_phase[(dsps & 0xf00) >> 8]);
-		scsi_print_msg(hostdata->msgin);
+		spi_print_msg(hostdata->msgin);
 		printk("\n");
 		/* just reject it */
 		hostdata->msgout[0] = A_REJECT_MSG;
@@ -887,7 +887,7 @@ process_message(struct Scsi_Host *host,	struct NCR_700_Host_Parameters *hostdata
 #ifdef NCR_700_DEBUG
 	printk("scsi%d (%d:%d): message %s: ", host->host_no, pun, lun,
 	       NCR_700_phase[(dsps & 0xf00) >> 8]);
-	scsi_print_msg(hostdata->msgin);
+	spi_print_msg(hostdata->msgin);
 	printk("\n");
 #endif
 
@@ -939,7 +939,7 @@ process_message(struct Scsi_Host *host,	struct NCR_700_Host_Parameters *hostdata
 		       host->host_no, pun, lun,
 		       NCR_700_phase[(dsps & 0xf00) >> 8]);
 
-		scsi_print_msg(hostdata->msgin);
+		spi_print_msg(hostdata->msgin);
 		printk("\n");
 		/* just reject it */
 		hostdata->msgout[0] = A_REJECT_MSG;
diff --git a/drivers/scsi/53c700.h b/drivers/scsi/53c700.h
index 362d78483d0..a8c83bb0363 100644
--- a/drivers/scsi/53c700.h
+++ b/drivers/scsi/53c700.h
@@ -238,21 +238,23 @@ struct NCR_700_Host_Parameters {
 #ifdef CONFIG_53C700_LE_ON_BE
 #define bE	(hostdata->force_le_on_be ? 0 : 3)
 #define	bSWAP	(hostdata->force_le_on_be)
-/* This is terrible, but there's no raw version of ioread32.  That means
- * that on a be board we swap twice (once in ioread32 and once again to 
- * get the value correct) */
-#define bS_to_io(x)	((hostdata->force_le_on_be) ? (x) : cpu_to_le32(x))
+#define bEBus	(!hostdata->force_le_on_be)
 #elif defined(__BIG_ENDIAN)
 #define bE	3
 #define bSWAP	0
-#define bS_to_io(x)	(x)
 #elif defined(__LITTLE_ENDIAN)
 #define bE	0
 #define bSWAP	0
-#define bS_to_io(x)	(x)
 #else
 #error "__BIG_ENDIAN or __LITTLE_ENDIAN must be defined, did you include byteorder.h?"
 #endif
+#ifndef bEBus
+#ifdef CONFIG_53C700_BE_BUS
+#define bEBus	1
+#else
+#define bEBus	0
+#endif
+#endif
 #define bS_to_cpu(x)	(bSWAP ? le32_to_cpu(x) : (x))
 #define bS_to_host(x)	(bSWAP ? cpu_to_le32(x) : (x))
 
@@ -466,14 +468,15 @@ NCR_700_readl(struct Scsi_Host *host, __u32 reg)
 {
 	const struct NCR_700_Host_Parameters *hostdata
 		= (struct NCR_700_Host_Parameters *)host->hostdata[0];
-	__u32 value = ioread32(hostdata->base + reg);
+	__u32 value = bEBus ? ioread32be(hostdata->base + reg) :
+		ioread32(hostdata->base + reg);
 #if 1
 	/* sanity check the register */
 	if((reg & 0x3) != 0)
 		BUG();
 #endif
 
-	return bS_to_io(value);
+	return value;
 }
 
 static inline void
@@ -497,7 +500,8 @@ NCR_700_writel(__u32 value, struct Scsi_Host *host, __u32 reg)
 		BUG();
 #endif
 
-	iowrite32(bS_to_io(value), hostdata->base + reg);
+	bEBus ? iowrite32be(value, hostdata->base + reg): 
+		iowrite32(value, hostdata->base + reg);
 }
 
 #endif
diff --git a/drivers/scsi/53c7xx.c b/drivers/scsi/53c7xx.c
index 9cb5dd48383..7894b8ea84b 100644
--- a/drivers/scsi/53c7xx.c
+++ b/drivers/scsi/53c7xx.c
@@ -282,6 +282,7 @@
 #include "scsi.h"
 #include <scsi/scsi_dbg.h>
 #include <scsi/scsi_host.h>
+#include <scsi/scsi_transport_spi.h>
 #include "53c7xx.h"
 #include <linux/stat.h>
 #include <linux/stddef.h>
@@ -1724,7 +1725,7 @@ NCR53c7xx_run_tests (struct Scsi_Host *host) {
 		printk ("scsi%d : status ", host->host_no);
 		scsi_print_status (status);
 		printk ("\nscsi%d : message ", host->host_no);
-		scsi_print_msg (&msg);
+		spi_print_msg(&msg);
 		printk ("\n");
 	    } else if (hostdata->test_completed == 3) {
 		printk("scsi%d : test 2 no connection with target %d\n",
@@ -2313,7 +2314,7 @@ NCR53c7x0_dstat_sir_intr (struct Scsi_Host *host, struct
 	    printk ("scsi%d : received message", host->host_no);
 	    if (c) 
 	    	printk (" from target %d lun %d ", c->device->id, c->device->lun);
-	    scsi_print_msg ((unsigned char *) hostdata->msg_buf);
+	    spi_print_msg((unsigned char *) hostdata->msg_buf);
 	    printk("\n");
 	}
 	
@@ -5540,7 +5541,7 @@ print_dsa (struct Scsi_Host *host, u32 *dsa, const char *prefix) {
 	    i > 0 && !check_address ((unsigned long) ptr, 1);
 	    ptr += len, i -= len) {
 	    printk("               ");
-	    len = scsi_print_msg (ptr);
+	    len = spi_print_msg(ptr);
 	    printk("\n");
 	    if (!len)
 		break;
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 20dd85a7781..4c42065dea8 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -336,6 +336,7 @@ config SCSI_ACARD
 config SCSI_AHA152X
 	tristate "Adaptec AHA152X/2825 support"
 	depends on ISA && SCSI && !64BIT
+	select SCSI_SPI_ATTRS
 	---help---
 	  This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
 	  SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
@@ -623,6 +624,7 @@ config SCSI_OMIT_FLASHPOINT
 config SCSI_DMX3191D
 	tristate "DMX3191D SCSI support"
 	depends on PCI && SCSI
+	select SCSI_SPI_ATTRS
 	help
 	  This is support for Domex DMX3191D SCSI Host Adapters.
 
@@ -632,6 +634,7 @@ config SCSI_DMX3191D
 config SCSI_DTC3280
 	tristate "DTC3180/3280 SCSI support"
 	depends on ISA && SCSI
+	select SCSI_SPI_ATTRS
 	help
 	  This is support for DTC 3180/3280 SCSI Host Adapters.  Please read
 	  the SCSI-HOWTO, available from
@@ -752,6 +755,7 @@ config SCSI_GDTH
 config SCSI_GENERIC_NCR5380
 	tristate "Generic NCR5380/53c400 SCSI PIO support"
 	depends on ISA && SCSI
+	select SCSI_SPI_ATTRS
 	---help---
 	  This is a driver for the old NCR 53c80 series of SCSI controllers
 	  on boards using PIO. Most boards such as the Trantor T130 fit this
@@ -771,6 +775,7 @@ config SCSI_GENERIC_NCR5380
 config SCSI_GENERIC_NCR5380_MMIO
 	tristate "Generic NCR5380/53c400 SCSI MMIO support"
 	depends on ISA && SCSI
+	select SCSI_SPI_ATTRS
 	---help---
 	  This is a driver for the old NCR 53c80 series of SCSI controllers
 	  on boards using memory mapped I/O. 
@@ -1254,6 +1259,7 @@ config SCSI_MCA_53C9X
 config SCSI_PAS16
 	tristate "PAS16 SCSI support"
 	depends on ISA && SCSI
+	select SCSI_SPI_ATTRS
 	---help---
 	  This is support for a SCSI host adapter.  It is explained in section
 	  3.10 of the SCSI-HOWTO, available from
@@ -1423,6 +1429,7 @@ config SCSI_DC390T
 config SCSI_T128
 	tristate "Trantor T128/T128F/T228 SCSI support"
 	depends on ISA && SCSI
+	select SCSI_SPI_ATTRS
 	---help---
 	  This is support for a SCSI host adapter. It is explained in section
 	  3.11 of the SCSI-HOWTO, available from
@@ -1681,6 +1688,7 @@ config OKTAGON_SCSI
 config ATARI_SCSI
 	tristate "Atari native SCSI support"
 	depends on ATARI && SCSI && BROKEN
+	select SCSI_SPI_ATTRS
 	---help---
 	  If you have an Atari with built-in NCR5380 SCSI controller (TT,
 	  Falcon, ...) say Y to get it supported. Of course also, if you have
@@ -1722,6 +1730,7 @@ config TT_DMA_EMUL
 config MAC_SCSI
 	bool "Macintosh NCR5380 SCSI"
 	depends on MAC && SCSI=y
+	select SCSI_SPI_ATTRS
 	help
 	  This is the NCR 5380 SCSI controller included on most of the 68030
 	  based Macintoshes.  If you have one of these say Y and read the
@@ -1743,6 +1752,7 @@ config SCSI_MAC_ESP
 config MVME147_SCSI
 	bool "WD33C93 SCSI driver for MVME147"
 	depends on MVME147 && SCSI=y
+	select SCSI_SPI_ATTRS
 	help
 	  Support for the on-board SCSI controller on the Motorola MVME147
 	  single-board computer.
@@ -1750,6 +1760,7 @@ config MVME147_SCSI
 config MVME16x_SCSI
 	bool "NCR53C710 SCSI driver for MVME16x"
 	depends on MVME16x && SCSI && BROKEN
+	select SCSI_SPI_ATTRS
 	help
 	  The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710
 	  SCSI controller chip.  Almost everyone using one of these boards
@@ -1758,6 +1769,7 @@ config MVME16x_SCSI
 config BVME6000_SCSI
 	bool "NCR53C710 SCSI driver for BVME6000"
 	depends on BVME6000 && SCSI && BROKEN
+	select SCSI_SPI_ATTRS
 	help
 	  The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710
 	  SCSI controller chip.  Almost everyone using one of these boards
@@ -1774,6 +1786,7 @@ config SCSI_NCR53C7xx_FAST
 config SUN3_SCSI
 	tristate "Sun3 NCR5380 SCSI"
 	depends on SUN3 && SCSI && BROKEN
+	select SCSI_SPI_ATTRS
 	help
 	  This option will enable support for the OBIO (onboard io) NCR5380
 	  SCSI controller found in the Sun 3/50 and 3/60, as well as for
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index cba9655d0f1..9f0ddbe6dc7 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -87,6 +87,7 @@
  *      the high level code.
  */
 #include <scsi/scsi_dbg.h>
+#include <scsi/scsi_transport_spi.h>
 
 #ifndef NDEBUG
 #define NDEBUG 0
@@ -2377,7 +2378,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
  * 3..length+1  arguments
  *
  * Start the extended message buffer with the EXTENDED_MESSAGE
- * byte, since scsi_print_msg() wants the whole thing.  
+ * byte, since spi_print_msg() wants the whole thing.  
  */
 					extended_msg[0] = EXTENDED_MESSAGE;
 					/* Accept first byte by clearing ACK */
@@ -2424,7 +2425,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
 				default:
 					if (!tmp) {
 						printk("scsi%d: rejecting message ", instance->host_no);
-						scsi_print_msg(extended_msg);
+						spi_print_msg(extended_msg);
 						printk("\n");
 					} else if (tmp != EXTENDED_MESSAGE)
 						scmd_printk(KERN_INFO, cmd,
@@ -2560,7 +2561,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance) {
 
 	if (!(msg[0] & 0x80)) {
 		printk(KERN_ERR "scsi%d : expecting IDENTIFY message, got ", instance->host_no);
-		scsi_print_msg(msg);
+		spi_print_msg(msg);
 		abort = 1;
 	} else {
 		/* Accept message by clearing ACK */
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index 9df23b654ce..cb2ee25f213 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -259,6 +259,7 @@
 #include "scsi.h"
 #include <scsi/scsi_dbg.h>
 #include <scsi/scsi_host.h>
+#include <scsi/scsi_transport_spi.h>
 #include "aha152x.h"
 
 
@@ -1845,7 +1846,7 @@ static void msgi_run(struct Scsi_Host *shpnt)
 #if defined(AHA152X_DEBUG)
 		if (HOSTDATA(shpnt)->debug & debug_msgi) {
 			printk(INFO_LEAD "inbound message %02x ", CMDINFO(CURRENT_SC), MSGI(0));
-			scsi_print_msg(&MSGI(0));
+			spi_print_msg(&MSGI(0));
 			printk("\n");
 		}
 #endif
@@ -1933,7 +1934,7 @@ static void msgi_run(struct Scsi_Host *shpnt)
 						break;
 
 					printk(INFO_LEAD, CMDINFO(CURRENT_SC));
-					scsi_print_msg(&MSGI(0));
+					spi_print_msg(&MSGI(0));
 					printk("\n");
 
 					ticks = (MSGI(3) * 4 + 49) / 50;
@@ -2031,7 +2032,7 @@ static void msgo_init(struct Scsi_Host *shpnt)
 		int i;
 
 		printk(DEBUG_LEAD "messages( ", CMDINFO(CURRENT_SC));
-		for (i=0; i<MSGOLEN; i+=scsi_print_msg(&MSGO(i)), printk(" "))
+		for (i=0; i<MSGOLEN; i+=spi_print_msg(&MSGO(i)), printk(" "))
 			;
 		printk(")\n");
 	}
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 6aab9dacdee..1c8f872e2dd 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -1064,6 +1064,7 @@ ahd_linux_register_host(struct ahd_softc *ahd, struct scsi_host_template *templa
 	struct	Scsi_Host *host;
 	char	*new_name;
 	u_long	s;
+	int	retval;
 
 	template->name = ahd->description;
 	host = scsi_host_alloc(template, sizeof(struct ahd_softc *));
@@ -1096,9 +1097,15 @@ ahd_linux_register_host(struct ahd_softc *ahd, struct scsi_host_template *templa
 
 	host->transportt = ahd_linux_transport_template;
 
-	scsi_add_host(host, &ahd->dev_softc->dev); /* XXX handle failure */
+	retval = scsi_add_host(host, &ahd->dev_softc->dev);
+	if (retval) {
+		printk(KERN_WARNING "aic79xx: scsi_add_host failed\n");
+		scsi_host_put(host);
+		return retval;
+	}
+
 	scsi_scan_host(host);
-	return (0);
+	return 0;
 }
 
 uint64_t
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index d866213f42b..fd389e9f946 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -1061,10 +1061,11 @@ uint32_t aic7xxx_verbose;
 int
 ahc_linux_register_host(struct ahc_softc *ahc, struct scsi_host_template *template)
 {
-	char	 buf[80];
-	struct	 Scsi_Host *host;
+	char	buf[80];
+	struct	Scsi_Host *host;
 	char	*new_name;
-	u_long	 s;
+	u_long	s;
+	int	retval;
 
 	template->name = ahc->description;
 	host = scsi_host_alloc(template, sizeof(struct ahc_softc *));
@@ -1097,9 +1098,16 @@ ahc_linux_register_host(struct ahc_softc *ahc, struct scsi_host_template *templa
 
 	host->transportt = ahc_linux_transport_template;
 
-	scsi_add_host(host, (ahc->dev_softc ? &ahc->dev_softc->dev : NULL)); /* XXX handle failure */
+	retval = scsi_add_host(host,
+			(ahc->dev_softc ? &ahc->dev_softc->dev : NULL));
+	if (retval) {
+		printk(KERN_WARNING "aic7xxx: scsi_add_host failed\n");
+		scsi_host_put(host);
+		return retval;
+	}
+
 	scsi_scan_host(host);
-	return (0);
+	return 0;
 }
 
 /*
diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig
index 13f23043c8a..06d7601cdf5 100644
--- a/drivers/scsi/arm/Kconfig
+++ b/drivers/scsi/arm/Kconfig
@@ -4,6 +4,7 @@
 config SCSI_ACORNSCSI_3
 	tristate "Acorn SCSI card (aka30) support"
 	depends on ARCH_ACORN && SCSI && BROKEN
+	select SCSI_SPI_ATTRS
 	help
 	  This enables support for the Acorn SCSI card (aka30). If you have an
 	  Acorn system with one of these, say Y. If unsure, say N.
diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c
index b7b20c689c2..09ed05727bc 100644
--- a/drivers/scsi/arm/acornscsi.c
+++ b/drivers/scsi/arm/acornscsi.c
@@ -152,6 +152,7 @@
 #include "../scsi.h"
 #include <scsi/scsi_dbg.h>
 #include <scsi/scsi_host.h>
+#include <scsi/scsi_transport_spi.h>
 #include "acornscsi.h"
 #include "msgqueue.h"
 #include "scsi.h"
@@ -1370,7 +1371,7 @@ void acornscsi_sendmessage(AS_Host *host)
 
 	host->scsi.last_message = msg->msg[0];
 #if (DEBUG & DEBUG_MESSAGES)
-	scsi_print_msg(msg->msg);
+	spi_print_msg(msg->msg);
 #endif
 	break;
 
@@ -1392,7 +1393,7 @@ void acornscsi_sendmessage(AS_Host *host)
 	while ((msg = msgqueue_getmsg(&host->scsi.msgs, msgnr++)) != NULL) {
 	    unsigned int i;
 #if (DEBUG & DEBUG_MESSAGES)
-	    scsi_print_msg(msg);
+	    spi_print_msg(msg);
 #endif
 	    i = 0;
 	    if (acornscsi_write_pio(host, msg->msg, &i, msg->length, 1000000))
@@ -1488,7 +1489,7 @@ void acornscsi_message(AS_Host *host)
 #if (DEBUG & DEBUG_MESSAGES)
     printk("scsi%d.%c: message in: ",
 	    host->host->host_no, acornscsi_target(host));
-    scsi_print_msg(message);
+    spi_print_msg(message);
     printk("\n");
 #endif
 
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 2ae31ceb32a..57295bcea3e 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -74,6 +74,7 @@
  *     the high level code.
  */
 #include <scsi/scsi_dbg.h>
+#include <scsi/scsi_transport_spi.h>
 
 #if (NDEBUG & NDEBUG_