Merge branch 'ioat' into dmaengine

9 files changed, 56 insertions, 28 deletions

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 90d1e062ec4..359e9a71a02 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -8,6 +8,7 @@
 
 #include <linux/kthread.h>
 #include <linux/vmalloc.h>
+#include <linux/slab.h>
 #include <linux/delay.h>
 
 static int qla24xx_vport_disable(struct fc_vport *, bool);
@@ -1274,7 +1275,11 @@ qla2x00_fw_state_show(struct device *dev, struct device_attribute *attr,
 	int rval = QLA_FUNCTION_FAILED;
 	uint16_t state[5];
 
-	if (!vha->hw->flags.eeh_busy)
+	if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
+		test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
+		DEBUG2_3_11(printk("%s(%ld): isp reset in progress.\n",
+			__func__, vha->host_no));
+	else if (!vha->hw->flags.eeh_busy)
 		rval = qla2x00_get_firmware_state(vha, state);
 	if (rval != QLA_SUCCESS)
 		memset(state, -1, sizeof(state));
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index cebf4f1bb7d..42c5587cc50 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -1592,10 +1592,22 @@ struct nvram_81xx {
 
 	/* Offset 384. */
 	uint8_t reserved_21[16];
-	uint16_t reserved_22[8];
+	uint16_t reserved_22[3];
+
+	/*
+	 * BIT 0 = Extended BB credits for LR
+	 * BIT 1 = Virtual Fabric Enable
+	 * BIT 2 = Enhanced Features Unused
+	 * BIT 3-7 = Enhanced Features Reserved
+	 */
+	/* Enhanced Features */
+	uint8_t enhanced_features;
+
+	uint8_t reserved_23;
+	uint16_t reserved_24[4];
 
 	/* Offset 416. */
-	uint16_t reserved_23[32];
+	uint16_t reserved_25[32];
 
 	/* Offset 480. */
 	uint8_t model_name[16];
@@ -1603,7 +1615,7 @@ struct nvram_81xx {
 	/* Offset 496. */
 	uint16_t feature_mask_l;
 	uint16_t feature_mask_h;
-	uint16_t reserved_24[2];
+	uint16_t reserved_26[2];
 
 	uint16_t subsystem_vendor_id;
 	uint16_t subsystem_device_id;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index a67b2bafb88..4229bb483c5 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -8,6 +8,7 @@
 #include "qla_gbl.h"
 
 #include <linux/delay.h>
+#include <linux/slab.h>
 #include <linux/vmalloc.h>
 
 #include "qla_devtbl.h"
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index ab90329ff2e..db539b0c3da 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -7,6 +7,7 @@
 #include "qla_def.h"
 
 #include <linux/delay.h>
+#include <linux/slab.h>
 #include <scsi/scsi_tcq.h>
 #include <scsi/scsi_bsg_fc.h>
 
@@ -620,11 +621,10 @@ skip_rio:
 		 *           vp_idx does not match
 		 *       Event is not global, vp_idx does not match
 		 */
-		if ((mb[1] == 0xffff && (mb[3] & 0xff) != 0xff)
-			|| (mb[1] != 0xffff)) {
-			if (vha->vp_idx != (mb[3] & 0xff))
-				break;
-		}
+		if (IS_QLA2XXX_MIDTYPE(ha) &&
+		    ((mb[1] == 0xffff && (mb[3] & 0xff) != 0xff) ||
+			(mb[1] != 0xffff)) && vha->vp_idx != (mb[3] & 0xff))
+			break;
 
 		/* Global event -- port logout or port unavailable. */
 		if (mb[1] == 0xffff && mb[2] == 0x7) {
@@ -2272,30 +2272,28 @@ qla2x00_request_irqs(struct qla_hw_data *ha, struct rsp_que *rsp)
 
 	/* If possible, enable MSI-X. */
 	if (!IS_QLA2432(ha) && !IS_QLA2532(ha) &&
-	    !IS_QLA8432(ha) && !IS_QLA8001(ha))
-		goto skip_msix;
+		!IS_QLA8432(ha) && !IS_QLA8001(ha))
+		goto skip_msi;
+
+	if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_HP &&
+		(ha->pdev->subsystem_device == 0x7040 ||
+		ha->pdev->subsystem_device == 0x7041 ||
+		ha->pdev->subsystem_device == 0x1705)) {
+		DEBUG2(qla_printk(KERN_WARNING, ha,
+			"MSI-X: Unsupported ISP2432 SSVID/SSDID (0x%X,0x%X).\n",
+			ha->pdev->subsystem_vendor,
+			ha->pdev->subsystem_device));
+		goto skip_msi;
+	}
 
 	if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX ||
 		!QLA_MSIX_FW_MODE_1(ha->fw_attributes))) {
 		DEBUG2(qla_printk(KERN_WARNING, ha,
 		"MSI-X: Unsupported ISP2432 (0x%X, 0x%X).\n",
 			ha->pdev->revision, ha->fw_attributes));
-
 		goto skip_msix;
 	}
 
-	if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_HP &&
-	    (ha->pdev->subsystem_device == 0x7040 ||
-		ha->pdev->subsystem_device == 0x7041 ||
-		ha->pdev->subsystem_device == 0x1705)) {
-		DEBUG2(qla_printk(KERN_WARNING, ha,
-		    "MSI-X: Unsupported ISP2432 SSVID/SSDID (0x%X, 0x%X).\n",
-		    ha->pdev->subsystem_vendor,
-		    ha->pdev->subsystem_device));
-
-		goto skip_msi;
-	}
-
 	ret = qla24xx_enable_msix(ha, rsp);
 	if (!ret) {
 		DEBUG2(qla_printk(KERN_INFO, ha,
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 6e53bdbb1da..42eb7ffd594 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -7,6 +7,7 @@
 #include "qla_def.h"
 
 #include <linux/delay.h>
+#include <linux/gfp.h>
 
 
 /*
@@ -339,6 +340,7 @@ qla2x00_load_ram(scsi_qla_host_t *vha, dma_addr_t req_dma, uint32_t risc_addr,
 	return rval;
 }
 
+#define	EXTENDED_BB_CREDITS	BIT_0
 /*
  * qla2x00_execute_fw
  *     Start adapter firmware.
@@ -371,7 +373,12 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr)
 		mcp->mb[1] = MSW(risc_addr);
 		mcp->mb[2] = LSW(risc_addr);
 		mcp->mb[3] = 0;
-		mcp->mb[4] = 0;
+		if (IS_QLA81XX(ha)) {
+			struct nvram_81xx *nv = ha->nvram;
+			mcp->mb[4] = (nv->enhanced_features &
+			    EXTENDED_BB_CREDITS);
+		} else
+			mcp->mb[4] = 0;
 		mcp->out_mb |= MBX_4|MBX_3|MBX_2|MBX_1;
 		mcp->in_mb |= MBX_1;
 	} else {
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index ff17dee2861..8220e7b9799 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -9,6 +9,7 @@
 
 #include <linux/moduleparam.h>
 #include <linux/vmalloc.h>
+#include <linux/slab.h>
 #include <linux/list.h>
 
 #include <scsi/scsi_tcq.h>
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 46720b23028..48c37e38ed0 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -12,6 +12,7 @@
 #include <linux/kthread.h>
 #include <linux/mutex.h>
 #include <linux/kobject.h>
+#include <linux/slab.h>
 
 #include <scsi/scsi_tcq.h>
 #include <scsi/scsicam.h>
@@ -1676,9 +1677,11 @@ skip_pio:
 
 	/* Determine queue resources */
 	ha->max_req_queues = ha->max_rsp_queues = 1;
-	if ((ql2xmaxqueues <= 1 || ql2xmultique_tag < 1) &&
+	if ((ql2xmaxqueues <= 1 && !ql2xmultique_tag) ||
+		(ql2xmaxqueues > 1 && ql2xmultique_tag) ||
 		(!IS_QLA25XX(ha) && !IS_QLA81XX(ha)))
 		goto mqiobase_exit;
+
 	ha->mqiobase = ioremap(pci_resource_start(ha->pdev, 3),
 			pci_resource_len(ha->pdev, 3));
 	if (ha->mqiobase) {
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 371dc895972..8b3de4e54c2 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -7,6 +7,7 @@
 #include "qla_def.h"
 
 #include <linux/delay.h>
+#include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 8d2fc2fa7a6..109068df933 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,9 +7,9 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.02-k1"
+#define QLA2XXX_VERSION      "8.03.02-k2"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3
 #define QLA_DRIVER_PATCH_VER	2
-#define QLA_DRIVER_BETA_VER	1
+#define QLA_DRIVER_BETA_VER	2