aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/megaraid/megaraid_sas_base.c
diff options
context:
space:
mode:
authorSumit.Saxena@lsi.com <Sumit.Saxena@lsi.com>2013-05-22 12:35:04 +0530
committerJames Bottomley <JBottomley@Parallels.com>2013-06-24 17:48:12 -0700
commitbc93d425fcb6443ffd6e20efa08f4960a30ab26f (patch)
tree8b91194f92099e1e414db83bec3145870ba0813f /drivers/scsi/megaraid/megaraid_sas_base.c
parentd46a3ad679c7232b72b21c6d0ca047dc4a68063f (diff)
[SCSI] megaraid_sas: Add support for Uneven Span PRL11
MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'drivers/scsi/megaraid/megaraid_sas_base.c')
-rw-r--r--drivers/scsi/megaraid/megaraid_sas_base.c26
1 files changed, 21 insertions, 5 deletions
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 11f1c940a2a..6d7b656bd21 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -171,8 +171,6 @@ megasas_sync_map_info(struct megasas_instance *instance);
int
wait_and_poll(struct megasas_instance *instance, struct megasas_cmd *cmd);
void megasas_reset_reply_desc(struct megasas_instance *instance);
-u8 MR_ValidateMapInfo(struct MR_FW_RAID_MAP_ALL *map,
- struct LD_LOAD_BALANCE_INFO *lbInfo);
int megasas_reset_fusion(struct Scsi_Host *shost);
void megasas_fusion_ocr_wq(struct work_struct *work);
@@ -2295,6 +2293,7 @@ megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
/* Check for LD map update */
if ((cmd->frame->dcmd.opcode == MR_DCMD_LD_MAP_GET_INFO) &&
(cmd->frame->dcmd.mbox.b[1] == 1)) {
+ fusion->fast_path_io = 0;
spin_lock_irqsave(instance->host->host_lock, flags);
if (cmd->frame->hdr.cmd_status != 0) {
if (cmd->frame->hdr.cmd_status !=
@@ -2312,9 +2311,13 @@ megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
} else
instance->map_id++;
megasas_return_cmd(instance, cmd);
- if (MR_ValidateMapInfo(
- fusion->ld_map[(instance->map_id & 1)],
- fusion->load_balance_info))
+
+ /*
+ * Set fast path IO to ZERO.
+ * Validate Map will set proper value.
+ * Meanwhile all IOs will go as LD IO.
+ */
+ if (MR_ValidateMapInfo(instance))
fusion->fast_path_io = 1;
else
fusion->fast_path_io = 0;
@@ -3661,6 +3664,18 @@ static int megasas_init_fw(struct megasas_instance *instance)
tmp_sectors = min_t(u32, max_sectors_1 , max_sectors_2);
instance->disableOnlineCtrlReset =
ctrl_info->properties.OnOffProperties.disableOnlineCtrlReset;
+ instance->UnevenSpanSupport =
+ ctrl_info->adapterOperations2.supportUnevenSpans;
+ if (instance->UnevenSpanSupport) {
+ struct fusion_context *fusion = instance->ctrl_context;
+ dev_info(&instance->pdev->dev, "FW supports: "
+ "UnevenSpanSupport=%x\n", instance->UnevenSpanSupport);
+ if (MR_ValidateMapInfo(instance))
+ fusion->fast_path_io = 1;
+ else
+ fusion->fast_path_io = 0;
+
+ }
}
instance->max_sectors_per_req = instance->max_num_sge *
@@ -4202,6 +4217,7 @@ static int megasas_probe_one(struct pci_dev *pdev,
instance->unload = 1;
instance->last_time = 0;
instance->disableOnlineCtrlReset = 1;
+ instance->UnevenSpanSupport = 0;
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) ||
(instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||